OpenCloudOS-Kernel/arch/arm/mach-pxa/viper.c

1001 lines
22 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-pxa/viper.c
*
* Support for the Arcom VIPER SBC.
*
* Author: Ian Campbell
* Created: Feb 03, 2003
* Copyright: Arcom Control Systems
*
* Maintained by Marc Zyngier <maz@misterjones.org>
* <marc.zyngier@altran.com>
*
* Based on lubbock.c:
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/memory.h>
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/gpio.h>
#include <linux/jiffies.h>
#include <linux/i2c-gpio.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
#include <linux/pwm_backlight.h>
#include <linux/usb/isp116x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/regs-uart.h>
#include <mach/arcom-pcmcia.h>
#include <mach/viper.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "generic.h"
#include "devices.h"
static unsigned int icr;
static void viper_icr_set_bit(unsigned int bit)
{
icr |= bit;
VIPER_ICR = icr;
}
static void viper_icr_clear_bit(unsigned int bit)
{
icr &= ~bit;
VIPER_ICR = icr;
}
/* This function is used from the pcmcia module to reset the CF */
static void viper_cf_reset(int state)
{
if (state)
viper_icr_set_bit(VIPER_ICR_CF_RST);
else
viper_icr_clear_bit(VIPER_ICR_CF_RST);
}
static struct arcom_pcmcia_pdata viper_pcmcia_info = {
.cd_gpio = VIPER_CF_CD_GPIO,
.rdy_gpio = VIPER_CF_RDY_GPIO,
.pwr_gpio = VIPER_CF_POWER_GPIO,
.reset = viper_cf_reset,
};
static struct platform_device viper_pcmcia_device = {
.name = "viper-pcmcia",
.id = -1,
.dev = {
.platform_data = &viper_pcmcia_info,
},
};
/*
* The CPLD version register was not present on VIPER boards prior to
* v2i1. On v1 boards where the version register is not present we
* will just read back the previous value from the databus.
*
* Therefore we do two reads. The first time we write 0 to the
* (read-only) register before reading and the second time we write
* 0xff first. If the two reads do not match or they read back as 0xff
* or 0x00 then we have version 1 hardware.
*/
static u8 viper_hw_version(void)
{
u8 v1, v2;
unsigned long flags;
local_irq_save(flags);
VIPER_VERSION = 0;
v1 = VIPER_VERSION;
VIPER_VERSION = 0xff;
v2 = VIPER_VERSION;
v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
local_irq_restore(flags);
return v1;
}
/* CPU sysdev */
static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
{
viper_icr_set_bit(VIPER_ICR_R_DIS);
return 0;
}
static int viper_cpu_resume(struct sys_device *sysdev)
{
viper_icr_clear_bit(VIPER_ICR_R_DIS);
return 0;
}
static struct sysdev_driver viper_cpu_sysdev_driver = {
.suspend = viper_cpu_suspend,
.resume = viper_cpu_resume,
};
static unsigned int current_voltage_divisor;
/*
* If force is not true then step from existing to new divisor. If
* force is true then jump straight to the new divisor. Stepping is
* used because if the jump in voltage is too large, the VCC can dip
* too low and the regulator cuts out.
*
* force can be used to initialize the divisor to a know state by
* setting the value for the current clock speed, since we are already
* running at that speed we know the voltage should be pretty close so
* the jump won't be too large
*/
static void viper_set_core_cpu_voltage(unsigned long khz, int force)
{
int i = 0;
unsigned int divisor = 0;
const char *v;
if (khz < 200000) {
v = "1.0"; divisor = 0xfff;
} else if (khz < 300000) {
v = "1.1"; divisor = 0xde5;
} else {
v = "1.3"; divisor = 0x325;
}
pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
v, (int)khz / 1000, (int)khz % 1000);
#define STEP 0x100
do {
int step;
if (force)
step = divisor;
else if (current_voltage_divisor < divisor - STEP)
step = current_voltage_divisor + STEP;
else if (current_voltage_divisor > divisor + STEP)
step = current_voltage_divisor - STEP;
else
step = divisor;
force = 0;
gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
for (i = 1 << 11 ; i > 0 ; i >>= 1) {
udelay(1);
gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
udelay(1);
gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
udelay(1);
gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
}
udelay(1);
gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
udelay(1);
gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
current_voltage_divisor = step;
} while (current_voltage_divisor != divisor);
}
/* Interrupt handling */
static unsigned long viper_irq_enabled_mask;
static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
static const int viper_isa_irq_map[] = {
0, /* ISA irq #0, invalid */
0, /* ISA irq #1, invalid */
0, /* ISA irq #2, invalid */
1 << 0, /* ISA irq #3 */
1 << 1, /* ISA irq #4 */
1 << 2, /* ISA irq #5 */
1 << 3, /* ISA irq #6 */
1 << 4, /* ISA irq #7 */
0, /* ISA irq #8, invalid */
1 << 8, /* ISA irq #9 */
1 << 5, /* ISA irq #10 */
1 << 6, /* ISA irq #11 */
1 << 7, /* ISA irq #12 */
0, /* ISA irq #13, invalid */
1 << 9, /* ISA irq #14 */
1 << 10, /* ISA irq #15 */
};
static inline int viper_irq_to_bitmask(unsigned int irq)
{
return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
}
static inline int viper_bit_to_irq(int bit)
{
return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
}
static void viper_ack_irq(struct irq_data *d)
{
int viper_irq = viper_irq_to_bitmask(d->irq);
if (viper_irq & 0xff)
VIPER_LO_IRQ_STATUS = viper_irq;
else
VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
}
static void viper_mask_irq(struct irq_data *d)
{
viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(d->irq));
}
static void viper_unmask_irq(struct irq_data *d)
{
viper_irq_enabled_mask |= viper_irq_to_bitmask(d->irq);
}
static inline unsigned long viper_irq_pending(void)
{
return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
viper_irq_enabled_mask;
}
static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending;
pending = viper_irq_pending();
do {
/* we're in a chained irq handler,
* so ack the interrupt by hand */
desc->irq_data.chip->irq_ack(&desc->irq_data);
if (likely(pending)) {
irq = viper_bit_to_irq(__ffs(pending));
generic_handle_irq(irq);
}
pending = viper_irq_pending();
} while (pending);
}
static struct irq_chip viper_irq_chip = {
.name = "ISA",
.irq_ack = viper_ack_irq,
.irq_mask = viper_mask_irq,
.irq_unmask = viper_unmask_irq
};
static void __init viper_init_irq(void)
{
int level;
int isa_irq;
pxa25x_init_irq();
/* setup ISA IRQs */
for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
isa_irq = viper_bit_to_irq(level);
irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
handle_edge_irq);
set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
}
irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
viper_irq_handler);
irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
}
/* Flat Panel */
static struct pxafb_mode_info fb_mode_info[] = {
{
.pixclock = 157500,
.xres = 320,
.yres = 240,
.bpp = 16,
.hsync_len = 63,
.left_margin = 7,
.right_margin = 13,
.vsync_len = 20,
.upper_margin = 0,
.lower_margin = 0,
.sync = 0,
},
};
static struct pxafb_mach_info fb_info = {
.modes = fb_mode_info,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
static int viper_backlight_init(struct device *dev)
{
int ret;
/* GPIO9 and 10 control FB backlight. Initialise to off */
ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
if (ret)
goto err_request_bckl;
ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
if (ret)
goto err_request_lcd;
ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
if (ret)
goto err_dir;
ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
if (ret)
goto err_dir;
return 0;
err_dir:
gpio_free(VIPER_LCD_EN_GPIO);
err_request_lcd:
gpio_free(VIPER_BCKLIGHT_EN_GPIO);
err_request_bckl:
dev_err(dev, "Failed to setup LCD GPIOs\n");
return ret;
}
static int viper_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
return brightness;
}
static void viper_backlight_exit(struct device *dev)
{
gpio_free(VIPER_LCD_EN_GPIO);
gpio_free(VIPER_BCKLIGHT_EN_GPIO);
}
static struct platform_pwm_backlight_data viper_backlight_data = {
.pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
.pwm_period_ns = 1000000,
.init = viper_backlight_init,
.notify = viper_backlight_notify,
.exit = viper_backlight_exit,
};
static struct platform_device viper_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa25x_device_pwm0.dev,
.platform_data = &viper_backlight_data,
},
};
/* Ethernet */
static struct resource smc91x_resources[] = {
[0] = {
.name = "smc91x-regs",
.start = VIPER_ETH_PHYS + 0x300,
.end = VIPER_ETH_PHYS + 0x30f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gpio_to_irq(VIPER_ETH_GPIO),
.end = gpio_to_irq(VIPER_ETH_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
[2] = {
.name = "smc91x-data32",
.start = VIPER_ETH_DATA_PHYS,
.end = VIPER_ETH_DATA_PHYS + 3,
.flags = IORESOURCE_MEM,
},
};
static struct smc91x_platdata viper_smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &viper_smc91x_info,
},
};
/* i2c */
static struct i2c_gpio_platform_data i2c_bus_data = {
.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
.udelay = 10,
.timeout = HZ,
};
static struct platform_device i2c_bus_device = {
.name = "i2c-gpio",
.id = 1, /* pxa2xx-i2c is bus 0, so start at 1 */
.dev = {
.platform_data = &i2c_bus_data,
}
};
static struct i2c_board_info __initdata viper_i2c_devices[] = {
{
I2C_BOARD_INFO("ds1338", 0x68),
},
};
/*
* Serial configuration:
* You can either have the standard PXA ports driven by the PXA driver,
* or all the ports (PXA + 16850) driven by the 8250 driver.
* Choose your poison.
*/
static struct resource viper_serial_resources[] = {
#ifndef CONFIG_SERIAL_PXA
{
.start = 0x40100000,
.end = 0x4010001f,
.flags = IORESOURCE_MEM,
},
{
.start = 0x40200000,
.end = 0x4020001f,
.flags = IORESOURCE_MEM,
},
{
.start = 0x40700000,
.end = 0x4070001f,
.flags = IORESOURCE_MEM,
},
{
.start = VIPER_UARTA_PHYS,
.end = VIPER_UARTA_PHYS + 0xf,
.flags = IORESOURCE_MEM,
},
{
.start = VIPER_UARTB_PHYS,
.end = VIPER_UARTB_PHYS + 0xf,
.flags = IORESOURCE_MEM,
},
#else
{
0,
},
#endif
};
static struct plat_serial8250_port serial_platform_data[] = {
#ifndef CONFIG_SERIAL_PXA
/* Internal UARTs */
{
.membase = (void *)&FFUART,
.mapbase = __PREG(FFUART),
.irq = IRQ_FFUART,
.uartclk = 921600 * 16,
.regshift = 2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
{
.membase = (void *)&BTUART,
.mapbase = __PREG(BTUART),
.irq = IRQ_BTUART,
.uartclk = 921600 * 16,
.regshift = 2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
{
.membase = (void *)&STUART,
.mapbase = __PREG(STUART),
.irq = IRQ_STUART,
.uartclk = 921600 * 16,
.regshift = 2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
},
/* External UARTs */
{
.mapbase = VIPER_UARTA_PHYS,
.irq = gpio_to_irq(VIPER_UARTA_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
UPF_SKIP_TEST,
},
{
.mapbase = VIPER_UARTB_PHYS,
.irq = gpio_to_irq(VIPER_UARTB_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
UPF_SKIP_TEST,
},
#endif
{ },
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = serial_platform_data,
},
.num_resources = ARRAY_SIZE(viper_serial_resources),
.resource = viper_serial_resources,
};
/* USB */
static void isp116x_delay(struct device *dev, int delay)
{
ndelay(delay);
}
static struct resource isp116x_resources[] = {
[0] = { /* DATA */
.start = VIPER_USB_PHYS + 0,
.end = VIPER_USB_PHYS + 1,
.flags = IORESOURCE_MEM,
},
[1] = { /* ADDR */
.start = VIPER_USB_PHYS + 2,
.end = VIPER_USB_PHYS + 3,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = gpio_to_irq(VIPER_USB_GPIO),
.end = gpio_to_irq(VIPER_USB_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
static struct isp116x_platform_data isp116x_platform_data = {
/* Enable internal resistors on downstream ports */
.sel15Kres = 1,
/* On-chip overcurrent protection */
.oc_enable = 1,
/* INT output polarity */
.int_act_high = 1,
/* INT edge or level triggered */
.int_edge_triggered = 0,
/* WAKEUP pin connected - NOT SUPPORTED */
/* .remote_wakeup_connected = 0, */
/* Wakeup by devices on usb bus enabled */
.remote_wakeup_enable = 0,
.delay = isp116x_delay,
};
static struct platform_device isp116x_device = {
.name = "isp116x-hcd",
.id = -1,
.num_resources = ARRAY_SIZE(isp116x_resources),
.resource = isp116x_resources,
.dev = {
.platform_data = &isp116x_platform_data,
},
};
/* MTD */
static struct resource mtd_resources[] = {
[0] = { /* RedBoot config + filesystem flash */
.start = VIPER_FLASH_PHYS,
.end = VIPER_FLASH_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
},
[1] = { /* Boot flash */
.start = VIPER_BOOT_PHYS,
.end = VIPER_BOOT_PHYS + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[2] = { /*
* SRAM size is actually 256KB, 8bits, with a sparse mapping
* (each byte is on a 16bit boundary).
*/
.start = _VIPER_SRAM_BASE,
.end = _VIPER_SRAM_BASE + SZ_512K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct mtd_partition viper_boot_flash_partition = {
.name = "RedBoot",
.size = SZ_1M,
.offset = 0,
.mask_flags = MTD_WRITEABLE, /* force R/O */
};
static struct physmap_flash_data viper_flash_data[] = {
[0] = {
.width = 2,
.parts = NULL,
.nr_parts = 0,
},
[1] = {
.width = 2,
.parts = &viper_boot_flash_partition,
.nr_parts = 1,
},
};
static struct platform_device viper_mtd_devices[] = {
[0] = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &viper_flash_data[0],
},
.resource = &mtd_resources[0],
.num_resources = 1,
},
[1] = {
.name = "physmap-flash",
.id = 1,
.dev = {
.platform_data = &viper_flash_data[1],
},
.resource = &mtd_resources[1],
.num_resources = 1,
},
};
static struct platform_device *viper_devs[] __initdata = {
&smc91x_device,
&i2c_bus_device,
&serial_device,
&isp116x_device,
&viper_mtd_devices[0],
&viper_mtd_devices[1],
&viper_backlight_device,
&viper_pcmcia_device,
};
static mfp_cfg_t viper_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO79_nCS_3,
GPIO80_nCS_4,
GPIO33_nCS_5,
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
/* FP Backlight */
GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */
GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */
GPIO16_PWM0_OUT,
/* Ethernet PHY Ready */
GPIO18_RDY,
/* Serial shutdown */
GPIO12_GPIO | MFP_LPM_DRIVE_HIGH, /* VIPER_UART_SHDN_GPIO */
/* Compact-Flash / PC104 */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO54_nPSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
GPIO8_GPIO, /* VIPER_CF_RDY_GPIO */
GPIO32_GPIO, /* VIPER_CF_CD_GPIO */
GPIO82_GPIO, /* VIPER_CF_POWER_GPIO */
/* Integrated UPS control */
GPIO20_GPIO, /* VIPER_UPS_GPIO */
/* Vcc regulator control */
GPIO6_GPIO, /* VIPER_PSU_DATA_GPIO */
GPIO11_GPIO, /* VIPER_PSU_CLK_GPIO */
GPIO19_GPIO, /* VIPER_PSU_nCS_LD_GPIO */
/* i2c busses */
GPIO26_GPIO, /* VIPER_TPM_I2C_SDA_GPIO */
GPIO27_GPIO, /* VIPER_TPM_I2C_SCL_GPIO */
GPIO83_GPIO, /* VIPER_RTC_I2C_SDA_GPIO */
GPIO84_GPIO, /* VIPER_RTC_I2C_SCL_GPIO */
/* PC/104 Interrupt */
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* VIPER_CPLD_GPIO */
};
static unsigned long viper_tpm;
static int __init viper_tpm_setup(char *str)
{
strict_strtoul(str, 10, &viper_tpm);
return 1;
}
__setup("tpm=", viper_tpm_setup);
static void __init viper_tpm_init(void)
{
struct platform_device *tpm_device;
struct i2c_gpio_platform_data i2c_tpm_data = {
.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
.udelay = 10,
.timeout = HZ,
};
char *errstr;
/* Allocate TPM i2c bus if requested */
if (!viper_tpm)
return;
tpm_device = platform_device_alloc("i2c-gpio", 2);
if (tpm_device) {
if (!platform_device_add_data(tpm_device,
&i2c_tpm_data,
sizeof(i2c_tpm_data))) {
if (platform_device_add(tpm_device)) {
errstr = "register TPM i2c bus";
goto error_free_tpm;
}
} else {
errstr = "allocate TPM i2c bus data";
goto error_free_tpm;
}
} else {
errstr = "allocate TPM i2c device";
goto error_tpm;
}
return;
error_free_tpm:
kfree(tpm_device);
error_tpm:
pr_err("viper: Couldn't %s, giving up\n", errstr);
}
static void __init viper_init_vcore_gpios(void)
{
if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
goto err_request_data;
if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
goto err_request_clk;
if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
goto err_request_cs;
if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
goto err_dir;
/* c/should assume redboot set the correct level ??? */
viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
return;
err_dir:
gpio_free(VIPER_PSU_nCS_LD_GPIO);
err_request_cs:
gpio_free(VIPER_PSU_CLK_GPIO);
err_request_clk:
gpio_free(VIPER_PSU_DATA_GPIO);
err_request_data:
pr_err("viper: Failed to setup vcore control GPIOs\n");
}
static void __init viper_init_serial_gpio(void)
{
if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
goto err_request;
if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
goto err_dir;
return;
err_dir:
gpio_free(VIPER_UART_SHDN_GPIO);
err_request:
pr_err("viper: Failed to setup UART shutdown GPIO\n");
}
#ifdef CONFIG_CPU_FREQ
static int viper_cpufreq_notifier(struct notifier_block *nb,
unsigned long val, void *data)
{
struct cpufreq_freqs *freq = data;
/* TODO: Adjust timings??? */
switch (val) {
case CPUFREQ_PRECHANGE:
if (freq->old < freq->new) {
/* we are getting faster so raise the voltage
* before we change freq */
viper_set_core_cpu_voltage(freq->new, 0);
}
break;
case CPUFREQ_POSTCHANGE:
if (freq->old > freq->new) {
/* we are slowing down so drop the power
* after we change freq */
viper_set_core_cpu_voltage(freq->new, 0);
}
break;
case CPUFREQ_RESUMECHANGE:
viper_set_core_cpu_voltage(freq->new, 0);
break;
default:
/* ignore */
break;
}
return 0;
}
static struct notifier_block viper_cpufreq_notifier_block = {
.notifier_call = viper_cpufreq_notifier
};
static void __init viper_init_cpufreq(void)
{
if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER))
pr_err("viper: Failed to setup cpufreq notifier\n");
}
#else
static inline void viper_init_cpufreq(void) {}
#endif
static void viper_power_off(void)
{
pr_notice("Shutting off UPS\n");
gpio_set_value(VIPER_UPS_GPIO, 1);
/* Spin to death... */
while (1);
}
static void __init viper_init(void)
{
u8 version;
pm_power_off = viper_power_off;
pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
/* Wake-up serial console */
viper_init_serial_gpio();
pxa_set_fb_info(NULL, &fb_info);
/* v1 hardware cannot use the datacs line */
version = viper_hw_version();
if (version == 0)
smc91x_device.num_resources--;
pxa_set_i2c_info(NULL);
platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
viper_init_vcore_gpios();
viper_init_cpufreq();
sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
if (version) {
pr_info("viper: hardware v%di%d detected. "
"CPLD revision %d.\n",
VIPER_BOARD_VERSION(version),
VIPER_BOARD_ISSUE(version),
VIPER_CPLD_REVISION(version));
system_rev = (VIPER_BOARD_VERSION(version) << 8) |
(VIPER_BOARD_ISSUE(version) << 4) |
VIPER_CPLD_REVISION(version);
} else {
pr_info("viper: No version register.\n");
}
i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
viper_tpm_init();
pxa_set_ac97_info(NULL);
}
static struct map_desc viper_io_desc[] __initdata = {
{
.virtual = VIPER_CPLD_BASE,
.pfn = __phys_to_pfn(VIPER_CPLD_PHYS),
.length = 0x00300000,
.type = MT_DEVICE,
},
{
.virtual = VIPER_PC104IO_BASE,
.pfn = __phys_to_pfn(0x30000000),
.length = 0x00800000,
.type = MT_DEVICE,
},
};
static void __init viper_map_io(void)
{
pxa25x_map_io();
iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
PCFR |= PCFR_OPDE;
}
MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
.boot_params = 0xa0000100,
.map_io = viper_map_io,
.init_irq = viper_init_irq,
.timer = &pxa_timer,
.init_machine = viper_init,
MACHINE_END