[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
/*
|
|
|
|
* Hardware definitions for HP iPAQ h5xxx Handheld Computers
|
|
|
|
*
|
|
|
|
* Copyright 2000-2003 Hewlett-Packard Company.
|
|
|
|
* Copyright 2002 Jamey Hicks <jamey.hicks@hp.com>
|
|
|
|
* Copyright 2004-2005 Phil Blundell <pb@handhelds.org>
|
|
|
|
* Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
|
|
|
|
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
|
|
|
|
* FITNESS FOR ANY PARTICULAR PURPOSE.
|
|
|
|
*
|
|
|
|
* Author: Jamey Hicks.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <linux/mtd/physmap.h>
|
2009-01-02 23:17:22 +08:00
|
|
|
|
[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <asm/mach/map.h>
|
2009-01-02 23:17:22 +08:00
|
|
|
|
|
|
|
#include <mach/pxa25x.h>
|
[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
#include <mach/h5000.h>
|
|
|
|
#include <mach/udc.h>
|
2010-11-03 23:29:35 +08:00
|
|
|
#include <mach/smemc.h>
|
2009-01-02 23:17:22 +08:00
|
|
|
|
[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
#include "generic.h"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Flash
|
|
|
|
*/
|
|
|
|
|
|
|
|
static struct mtd_partition h5000_flash0_partitions[] = {
|
|
|
|
{
|
|
|
|
.name = "bootldr",
|
|
|
|
.size = 0x00040000,
|
|
|
|
.offset = 0,
|
|
|
|
.mask_flags = MTD_WRITEABLE,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "root",
|
|
|
|
.size = MTDPART_SIZ_FULL,
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct mtd_partition h5000_flash1_partitions[] = {
|
|
|
|
{
|
|
|
|
.name = "second root",
|
|
|
|
.size = SZ_16M - 0x00040000,
|
|
|
|
.offset = 0,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "asset",
|
|
|
|
.size = MTDPART_SIZ_FULL,
|
|
|
|
.offset = MTDPART_OFS_APPEND,
|
|
|
|
.mask_flags = MTD_WRITEABLE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct physmap_flash_data h5000_flash0_data = {
|
|
|
|
.width = 4,
|
|
|
|
.parts = h5000_flash0_partitions,
|
|
|
|
.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct physmap_flash_data h5000_flash1_data = {
|
|
|
|
.width = 4,
|
|
|
|
.parts = h5000_flash1_partitions,
|
|
|
|
.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource h5000_flash0_resources = {
|
|
|
|
.start = PXA_CS0_PHYS,
|
|
|
|
.end = PXA_CS0_PHYS + SZ_32M - 1,
|
|
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource h5000_flash1_resources = {
|
|
|
|
.start = PXA_CS0_PHYS + SZ_32M,
|
|
|
|
.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
|
|
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_device h5000_flash[] = {
|
|
|
|
{
|
|
|
|
.name = "physmap-flash",
|
|
|
|
.id = 0,
|
|
|
|
.resource = &h5000_flash0_resources,
|
|
|
|
.num_resources = 1,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &h5000_flash0_data,
|
|
|
|
},
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "physmap-flash",
|
|
|
|
.id = 1,
|
|
|
|
.resource = &h5000_flash1_resources,
|
|
|
|
.num_resources = 1,
|
|
|
|
.dev = {
|
|
|
|
.platform_data = &h5000_flash1_data,
|
|
|
|
},
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* USB Device Controller
|
|
|
|
*/
|
|
|
|
|
|
|
|
static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
|
|
|
|
.gpio_pullup = H5000_GPIO_USB_PULLUP,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* GPIO setup
|
|
|
|
*/
|
|
|
|
|
|
|
|
static unsigned long h5000_pin_config[] __initdata = {
|
|
|
|
/* Crystal and Clock Signals */
|
|
|
|
GPIO12_32KHz,
|
|
|
|
|
|
|
|
/* SDRAM and Static Memory I/O Signals */
|
|
|
|
GPIO15_nCS_1,
|
|
|
|
GPIO78_nCS_2,
|
|
|
|
GPIO79_nCS_3,
|
|
|
|
GPIO80_nCS_4,
|
|
|
|
|
|
|
|
/* FFUART */
|
|
|
|
GPIO34_FFUART_RXD,
|
|
|
|
GPIO35_FFUART_CTS,
|
|
|
|
GPIO36_FFUART_DCD,
|
|
|
|
GPIO37_FFUART_DSR,
|
|
|
|
GPIO38_FFUART_RI,
|
|
|
|
GPIO39_FFUART_TXD,
|
|
|
|
GPIO40_FFUART_DTR,
|
|
|
|
GPIO41_FFUART_RTS,
|
|
|
|
|
|
|
|
/* BTUART */
|
|
|
|
GPIO42_BTUART_RXD,
|
|
|
|
GPIO43_BTUART_TXD,
|
|
|
|
GPIO44_BTUART_CTS,
|
|
|
|
GPIO45_BTUART_RTS,
|
|
|
|
|
|
|
|
/* SSP1 */
|
|
|
|
GPIO23_SSP1_SCLK,
|
|
|
|
GPIO25_SSP1_TXD,
|
|
|
|
GPIO26_SSP1_RXD,
|
2009-02-06 00:48:19 +08:00
|
|
|
|
|
|
|
/* I2S */
|
|
|
|
GPIO28_I2S_BITCLK_OUT,
|
|
|
|
GPIO29_I2S_SDATA_IN,
|
|
|
|
GPIO30_I2S_SDATA_OUT,
|
|
|
|
GPIO31_I2S_SYNC,
|
|
|
|
GPIO32_I2S_SYSCLK,
|
[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Localbus setup:
|
|
|
|
* CS0: Flash;
|
|
|
|
* CS1: MediaQ chip, select 16-bit bus and vlio;
|
|
|
|
* CS5: SAMCOP.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void fix_msc(void)
|
|
|
|
{
|
2010-11-03 23:29:35 +08:00
|
|
|
__raw_writel(0x129c24f2, MSC0);
|
|
|
|
__raw_writel(0x7ff424fa, MSC1);
|
|
|
|
__raw_writel(0x7ff47ff4, MSC2);
|
[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
|
2010-11-03 23:29:35 +08:00
|
|
|
__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
|
[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Platform devices
|
|
|
|
*/
|
|
|
|
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
|
|
&h5000_flash[0],
|
|
|
|
&h5000_flash[1],
|
|
|
|
};
|
|
|
|
|
|
|
|
static void __init h5000_init(void)
|
|
|
|
{
|
|
|
|
fix_msc();
|
|
|
|
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
|
2009-11-09 13:34:08 +08:00
|
|
|
pxa_set_ffuart_info(NULL);
|
|
|
|
pxa_set_btuart_info(NULL);
|
|
|
|
pxa_set_stuart_info(NULL);
|
[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
pxa_set_udc_info(&h5000_udc_mach_info);
|
|
|
|
platform_add_devices(ARRAY_AND_SIZE(devices));
|
|
|
|
}
|
|
|
|
|
|
|
|
MACHINE_START(H5400, "HP iPAQ H5000")
|
|
|
|
.boot_params = 0xa0000100,
|
2010-10-11 08:20:19 +08:00
|
|
|
.map_io = pxa25x_map_io,
|
[ARM] pxa: add basic support for HP iPAQ h5000
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions.
Kernel will able to boot, work via serial console, mount filesystems
placed on flashes and run USB gadgets (g_ether by default).
Other device drivers (frame buffer, LCD, touchscreen, backlight,
bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ
SoCs/MFDs, drivers to which will be submitted too, after massive
cleanups.
This machine will be used as "real user" for these new drivers.
This is an updated version of the patch, which contains fixes proposed on
linux-arm-kernel mailing list.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-24 03:06:56 +08:00
|
|
|
.init_irq = pxa25x_init_irq,
|
|
|
|
.timer = &pxa_timer,
|
|
|
|
.init_machine = h5000_init,
|
|
|
|
MACHINE_END
|