UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/atm/zatm.c

1665 lines
43 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* drivers/atm/zatm.c - ZeitNet ZN122x device driver */
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
#include <linux/sonet.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/uio.h>
#include <linux/init.h>
net: remove interrupt.h inclusion from netdevice.h * remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06 18:43:46 +08:00
#include <linux/interrupt.h>
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
#include <linux/dma-mapping.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/atm_zatm.h>
#include <linux/capability.h>
#include <linux/bitops.h>
#include <linux/wait.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/byteorder.h>
#include <asm/string.h>
#include <asm/io.h>
atomic: use <linux/atomic.h> This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 07:09:06 +08:00
#include <linux/atomic.h>
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25 03:46:01 +08:00
#include <linux/uaccess.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "uPD98401.h"
#include "uPD98402.h"
#include "zeprom.h"
#include "zatm.h"
/*
* TODO:
*
* Minor features
* - support 64 kB SDUs (will have to use multibuffer batches then :-( )
* - proper use of CDV, credit = max(1,CDVT*PCR)
* - AAL0
* - better receive timestamps
* - OAM
*/
#define ZATM_COPPER 1
#if 0
#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
#else
#define DPRINTK(format,args...)
#endif
#ifndef CONFIG_ATM_ZATM_DEBUG
#define NULLCHECK(x)
#define EVENT(s,a,b)
static void event_dump(void)
{
}
#else
/*
* NULL pointer checking
*/
#define NULLCHECK(x) \
if ((unsigned long) (x) < 0x30) printk(KERN_CRIT #x "==0x%x\n", (int) (x))
/*
* Very extensive activity logging. Greatly improves bug detection speed but
* costs a few Mbps if enabled.
*/
#define EV 64
static const char *ev[EV];
static unsigned long ev_a[EV],ev_b[EV];
static int ec = 0;
static void EVENT(const char *s,unsigned long a,unsigned long b)
{
ev[ec] = s;
ev_a[ec] = a;
ev_b[ec] = b;
ec = (ec+1) % EV;
}
static void event_dump(void)
{
int n,i;
printk(KERN_NOTICE "----- event dump follows -----\n");
for (n = 0; n < EV; n++) {
i = (ec+n) % EV;
printk(KERN_NOTICE);
printk(ev[i] ? ev[i] : "(null)",ev_a[i],ev_b[i]);
}
printk(KERN_NOTICE "----- event dump ends here -----\n");
}
#endif /* CONFIG_ATM_ZATM_DEBUG */
#define RING_BUSY 1 /* indication from do_tx that PDU has to be
backlogged */
static struct atm_dev *zatm_boards = NULL;
static unsigned long dummy[2] = {0,0};
#define zin_n(r) inl(zatm_dev->base+r*4)
#define zin(r) inl(zatm_dev->base+uPD98401_##r*4)
#define zout(v,r) outl(v,zatm_dev->base+uPD98401_##r*4)
#define zwait while (zin(CMR) & uPD98401_BUSY)
/* RX0, RX1, TX0, TX1 */
static const int mbx_entries[NR_MBX] = { 1024,1024,1024,1024 };
static const int mbx_esize[NR_MBX] = { 16,16,4,4 }; /* entry size in bytes */
#define MBX_SIZE(i) (mbx_entries[i]*mbx_esize[i])
/*-------------------------------- utilities --------------------------------*/
static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
{
zwait;
zout(value,CER);
zout(uPD98401_IND_ACC | uPD98401_IA_BALL |
(uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
}
static u32 zpeekl(struct zatm_dev *zatm_dev,u32 addr)
{
zwait;
zout(uPD98401_IND_ACC | uPD98401_IA_BALL | uPD98401_IA_RW |
(uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
zwait;
return zin(CER);
}
/*------------------------------- free lists --------------------------------*/
/*
* Free buffer head structure:
* [0] pointer to buffer (for SAR)
* [1] buffer descr link pointer (for SAR)
* [2] back pointer to skb (for poll_rx)
* [3] data
* ...
*/
struct rx_buffer_head {
u32 buffer; /* pointer to buffer (for SAR) */
u32 link; /* buffer descriptor link pointer (for SAR) */
struct sk_buff *skb; /* back pointer to skb (for poll_rx) */
};
static void refill_pool(struct atm_dev *dev,int pool)
{
struct zatm_dev *zatm_dev;
struct sk_buff *skb;
struct rx_buffer_head *first;
unsigned long flags;
int align,offset,free,count,size;
EVENT("refill_pool\n",0,0);
zatm_dev = ZATM_DEV(dev);
size = (64 << (pool <= ZATM_AAL5_POOL_BASE ? 0 :
pool-ZATM_AAL5_POOL_BASE))+sizeof(struct rx_buffer_head);
if (size < PAGE_SIZE) {
align = 32; /* for 32 byte alignment */
offset = sizeof(struct rx_buffer_head);
}
else {
align = 4096;
offset = zatm_dev->pool_info[pool].offset+
sizeof(struct rx_buffer_head);
}
size += align;
spin_lock_irqsave(&zatm_dev->lock, flags);
free = zpeekl(zatm_dev,zatm_dev->pool_base+2*pool) &
uPD98401_RXFP_REMAIN;
spin_unlock_irqrestore(&zatm_dev->lock, flags);
if (free >= zatm_dev->pool_info[pool].low_water) return;
EVENT("starting ... POOL: 0x%x, 0x%x\n",
zpeekl(zatm_dev,zatm_dev->pool_base+2*pool),
zpeekl(zatm_dev,zatm_dev->pool_base+2*pool+1));
EVENT("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
count = 0;
first = NULL;
while (free < zatm_dev->pool_info[pool].high_water) {
struct rx_buffer_head *head;
skb = alloc_skb(size,GFP_ATOMIC);
if (!skb) {
printk(KERN_WARNING DEV_LABEL "(Itf %d): got no new "
"skb (%d) with %d free\n",dev->number,size,free);
break;
}
skb_reserve(skb,(unsigned char *) ((((unsigned long) skb->data+
align+offset-1) & ~(unsigned long) (align-1))-offset)-
skb->data);
head = (struct rx_buffer_head *) skb->data;
skb_reserve(skb,sizeof(struct rx_buffer_head));
if (!first) first = head;
count++;
head->buffer = virt_to_bus(skb->data);
head->link = 0;
head->skb = skb;
EVENT("enq skb 0x%08lx/0x%08lx\n",(unsigned long) skb,
(unsigned long) head);
spin_lock_irqsave(&zatm_dev->lock, flags);
if (zatm_dev->last_free[pool])
((struct rx_buffer_head *) (zatm_dev->last_free[pool]->
data))[-1].link = virt_to_bus(head);
zatm_dev->last_free[pool] = skb;
skb_queue_tail(&zatm_dev->pool[pool],skb);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
free++;
}
if (first) {
spin_lock_irqsave(&zatm_dev->lock, flags);
zwait;
zout(virt_to_bus(first),CER);
zout(uPD98401_ADD_BAT | (pool << uPD98401_POOL_SHIFT) | count,
CMR);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
EVENT ("POOL: 0x%x, 0x%x\n",
zpeekl(zatm_dev,zatm_dev->pool_base+2*pool),
zpeekl(zatm_dev,zatm_dev->pool_base+2*pool+1));
EVENT("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
}
}
static void drain_free(struct atm_dev *dev,int pool)
{
skb_queue_purge(&ZATM_DEV(dev)->pool[pool]);
}
static int pool_index(int max_pdu)
{
int i;
if (max_pdu % ATM_CELL_PAYLOAD)
printk(KERN_ERR DEV_LABEL ": driver error in pool_index: "
"max_pdu is %d\n",max_pdu);
if (max_pdu > 65536) return -1;
for (i = 0; (64 << i) < max_pdu; i++);
return i+ZATM_AAL5_POOL_BASE;
}
/* use_pool isn't reentrant */
static void use_pool(struct atm_dev *dev,int pool)
{
struct zatm_dev *zatm_dev;
unsigned long flags;
int size;
zatm_dev = ZATM_DEV(dev);
if (!(zatm_dev->pool_info[pool].ref_count++)) {
skb_queue_head_init(&zatm_dev->pool[pool]);
size = pool-ZATM_AAL5_POOL_BASE;
if (size < 0) size = 0; /* 64B... */
else if (size > 10) size = 10; /* ... 64kB */
spin_lock_irqsave(&zatm_dev->lock, flags);
zpokel(zatm_dev,((zatm_dev->pool_info[pool].low_water/4) <<
uPD98401_RXFP_ALERT_SHIFT) |
(1 << uPD98401_RXFP_BTSZ_SHIFT) |
(size << uPD98401_RXFP_BFSZ_SHIFT),
zatm_dev->pool_base+pool*2);
zpokel(zatm_dev,(unsigned long) dummy,zatm_dev->pool_base+
pool*2+1);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
zatm_dev->last_free[pool] = NULL;
refill_pool(dev,pool);
}
DPRINTK("pool %d: %d\n",pool,zatm_dev->pool_info[pool].ref_count);
}
static void unuse_pool(struct atm_dev *dev,int pool)
{
if (!(--ZATM_DEV(dev)->pool_info[pool].ref_count))
drain_free(dev,pool);
}
/*----------------------------------- RX ------------------------------------*/
#if 0
static void exception(struct atm_vcc *vcc)
{
static int count = 0;
struct zatm_dev *zatm_dev = ZATM_DEV(vcc->dev);
struct zatm_vcc *zatm_vcc = ZATM_VCC(vcc);
unsigned long *qrp;
int i;
if (count++ > 2) return;
for (i = 0; i < 8; i++)
printk("TX%d: 0x%08lx\n",i,
zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+i));
for (i = 0; i < 5; i++)
printk("SH%d: 0x%08lx\n",i,
zpeekl(zatm_dev,uPD98401_IM(zatm_vcc->shaper)+16*i));
qrp = (unsigned long *) zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
uPD98401_TXVC_QRP);
printk("qrp=0x%08lx\n",(unsigned long) qrp);
for (i = 0; i < 4; i++) printk("QRP[%d]: 0x%08lx",i,qrp[i]);
}
#endif
static const char *err_txt[] = {
"No error",
"RX buf underflow",
"RX FIFO overrun",
"Maximum len violation",
"CRC error",
"User abort",
"Length violation",
"T1 error",
"Deactivated",
"???",
"???",
"???",
"???",
"???",
"???",
"???"
};
static void poll_rx(struct atm_dev *dev,int mbx)
{
struct zatm_dev *zatm_dev;
unsigned long pos;
u32 x;
int error;
EVENT("poll_rx\n",0,0);
zatm_dev = ZATM_DEV(dev);
pos = (zatm_dev->mbx_start[mbx] & ~0xffffUL) | zin(MTA(mbx));
while (x = zin(MWA(mbx)), (pos & 0xffff) != x) {
u32 *here;
struct sk_buff *skb;
struct atm_vcc *vcc;
int cells,size,chan;
EVENT("MBX: host 0x%lx, nic 0x%x\n",pos,x);
here = (u32 *) pos;
if (((pos += 16) & 0xffff) == zatm_dev->mbx_end[mbx])
pos = zatm_dev->mbx_start[mbx];
cells = here[0] & uPD98401_AAL5_SIZE;
#if 0
printk("RX IND: 0x%x, 0x%x, 0x%x, 0x%x\n",here[0],here[1],here[2],here[3]);
{
unsigned long *x;
printk("POOL: 0x%08x, 0x%08x\n",zpeekl(zatm_dev,
zatm_dev->pool_base),
zpeekl(zatm_dev,zatm_dev->pool_base+1));
x = (unsigned long *) here[2];
printk("[0..3] = 0x%08lx, 0x%08lx, 0x%08lx, 0x%08lx\n",
x[0],x[1],x[2],x[3]);
}
#endif
error = 0;
if (here[3] & uPD98401_AAL5_ERR) {
error = (here[3] & uPD98401_AAL5_ES) >>
uPD98401_AAL5_ES_SHIFT;
if (error == uPD98401_AAL5_ES_DEACT ||
error == uPD98401_AAL5_ES_FREE) continue;
}
EVENT("error code 0x%x/0x%x\n",(here[3] & uPD98401_AAL5_ES) >>
uPD98401_AAL5_ES_SHIFT,error);
skb = ((struct rx_buffer_head *) bus_to_virt(here[2]))->skb;
[NET]: Store skb->timestamp as offset to a base timestamp Reduces skb size by 8 bytes on 64-bit. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-15 08:24:31 +08:00
__net_timestamp(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#if 0
printk("[-3..0] 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",((unsigned *) skb->data)[-3],
((unsigned *) skb->data)[-2],((unsigned *) skb->data)[-1],
((unsigned *) skb->data)[0]);
#endif
EVENT("skb 0x%lx, here 0x%lx\n",(unsigned long) skb,
(unsigned long) here);
#if 0
printk("dummy: 0x%08lx, 0x%08lx\n",dummy[0],dummy[1]);
#endif
size = error ? 0 : ntohs(((__be16 *) skb->data)[cells*
ATM_CELL_PAYLOAD/sizeof(u16)-3]);
EVENT("got skb 0x%lx, size %d\n",(unsigned long) skb,size);
chan = (here[3] & uPD98401_AAL5_CHAN) >>
uPD98401_AAL5_CHAN_SHIFT;
if (chan < zatm_dev->chans && zatm_dev->rx_map[chan]) {
[ATM]: Fix dereference of uninitialized pointer in zatm Fixing breakage from [NET]: Kill skb->list - original was assign vcc do a bunch of stuff using ZATM_VCC(vcc)->pool as common subexpression Now we do int pos = ZATM_VCC(vcc)->pool; assign vcc do a bunch of stuff even though vcc is not even initialized when we enter that block... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-03 03:18:03 +08:00
int pos;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
vcc = zatm_dev->rx_map[chan];
[ATM]: Fix dereference of uninitialized pointer in zatm Fixing breakage from [NET]: Kill skb->list - original was assign vcc do a bunch of stuff using ZATM_VCC(vcc)->pool as common subexpression Now we do int pos = ZATM_VCC(vcc)->pool; assign vcc do a bunch of stuff even though vcc is not even initialized when we enter that block... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-03 03:18:03 +08:00
pos = ZATM_VCC(vcc)->pool;
[NET]: Kill skb->list Remove the "list" member of struct sk_buff, as it is entirely redundant. All SKB list removal callers know which list the SKB is on, so storing this in sk_buff does nothing other than taking up some space. Two tricky bits were SCTP, which I took care of, and two ATM drivers which Francois Romieu <romieu@fr.zoreil.com> fixed up. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-08-10 10:25:21 +08:00
if (skb == zatm_dev->last_free[pos])
zatm_dev->last_free[pos] = NULL;
skb_unlink(skb, zatm_dev->pool + pos);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
else {
printk(KERN_ERR DEV_LABEL "(itf %d): RX indication "
"for non-existing channel\n",dev->number);
size = 0;
vcc = NULL;
event_dump();
}
if (error) {
static unsigned long silence = 0;
static int last_error = 0;
if (error != last_error ||
time_after(jiffies, silence) || silence == 0){
printk(KERN_WARNING DEV_LABEL "(itf %d): "
"chan %d error %s\n",dev->number,chan,
err_txt[error]);
last_error = error;
silence = (jiffies+2*HZ)|1;
}
size = 0;
}
if (size && (size > cells*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER ||
size <= (cells-1)*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER)) {
printk(KERN_ERR DEV_LABEL "(itf %d): size %d with %d "
"cells\n",dev->number,size,cells);
size = 0;
event_dump();
}
if (size > ATM_MAX_AAL5_PDU) {
printk(KERN_ERR DEV_LABEL "(itf %d): size too big "
"(%d)\n",dev->number,size);
size = 0;
event_dump();
}
if (!size) {
dev_kfree_skb_irq(skb);
if (vcc) atomic_inc(&vcc->stats->rx_err);
continue;
}
if (!atm_charge(vcc,skb->truesize)) {
dev_kfree_skb_irq(skb);
continue;
}
skb->len = size;
ATM_SKB(skb)->vcc = vcc;
vcc->push(vcc,skb);
atomic_inc(&vcc->stats->rx);
}
zout(pos & 0xffff,MTA(mbx));
#if 0 /* probably a stupid idea */
refill_pool(dev,zatm_vcc->pool);
/* maybe this saves us a few interrupts */
#endif
}
static int open_rx_first(struct atm_vcc *vcc)
{
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
unsigned long flags;
unsigned short chan;
int cells;
DPRINTK("open_rx_first (0x%x)\n",inb_p(0xc053));
zatm_dev = ZATM_DEV(vcc->dev);
zatm_vcc = ZATM_VCC(vcc);
zatm_vcc->rx_chan = 0;
if (vcc->qos.rxtp.traffic_class == ATM_NONE) return 0;
if (vcc->qos.aal == ATM_AAL5) {
if (vcc->qos.rxtp.max_sdu > 65464)
vcc->qos.rxtp.max_sdu = 65464;
/* fix this - we may want to receive 64kB SDUs
later */
drivers/atm: Use DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. In the case of the file drivers/atm/eni.c, I am a little bit suspicious of the -1 at the end of the affected expression. Please check that that is what is wanted. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23 10:22:58 +08:00
cells = DIV_ROUND_UP(vcc->qos.rxtp.max_sdu + ATM_AAL5_TRAILER,
ATM_CELL_PAYLOAD);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
zatm_vcc->pool = pool_index(cells*ATM_CELL_PAYLOAD);
}
else {
cells = 1;
zatm_vcc->pool = ZATM_AAL0_POOL;
}
if (zatm_vcc->pool < 0) return -EMSGSIZE;
spin_lock_irqsave(&zatm_dev->lock, flags);
zwait;
zout(uPD98401_OPEN_CHAN,CMR);
zwait;
DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
spin_unlock_irqrestore(&zatm_dev->lock, flags);
DPRINTK("chan is %d\n",chan);
if (!chan) return -EAGAIN;
use_pool(vcc->dev,zatm_vcc->pool);
DPRINTK("pool %d\n",zatm_vcc->pool);
/* set up VC descriptor */
spin_lock_irqsave(&zatm_dev->lock, flags);
zpokel(zatm_dev,zatm_vcc->pool << uPD98401_RXVC_POOL_SHIFT,
chan*VC_SIZE/4);
zpokel(zatm_dev,uPD98401_RXVC_OD | (vcc->qos.aal == ATM_AAL5 ?
uPD98401_RXVC_AR : 0) | cells,chan*VC_SIZE/4+1);
zpokel(zatm_dev,0,chan*VC_SIZE/4+2);
zatm_vcc->rx_chan = chan;
zatm_dev->rx_map[chan] = vcc;
spin_unlock_irqrestore(&zatm_dev->lock, flags);
return 0;
}
static int open_rx_second(struct atm_vcc *vcc)
{
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
unsigned long flags;
int pos,shift;
DPRINTK("open_rx_second (0x%x)\n",inb_p(0xc053));
zatm_dev = ZATM_DEV(vcc->dev);
zatm_vcc = ZATM_VCC(vcc);
if (!zatm_vcc->rx_chan) return 0;
spin_lock_irqsave(&zatm_dev->lock, flags);
/* should also handle VPI @@@ */
pos = vcc->vci >> 1;
shift = (1-(vcc->vci & 1)) << 4;
zpokel(zatm_dev,(zpeekl(zatm_dev,pos) & ~(0xffff << shift)) |
((zatm_vcc->rx_chan | uPD98401_RXLT_ENBL) << shift),pos);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
return 0;
}
static void close_rx(struct atm_vcc *vcc)
{
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
unsigned long flags;
int pos,shift;
zatm_vcc = ZATM_VCC(vcc);
zatm_dev = ZATM_DEV(vcc->dev);
if (!zatm_vcc->rx_chan) return;
DPRINTK("close_rx\n");
/* disable receiver */
if (vcc->vpi != ATM_VPI_UNSPEC && vcc->vci != ATM_VCI_UNSPEC) {
spin_lock_irqsave(&zatm_dev->lock, flags);
pos = vcc->vci >> 1;
shift = (1-(vcc->vci & 1)) << 4;
zpokel(zatm_dev,zpeekl(zatm_dev,pos) & ~(0xffff << shift),pos);
zwait;
zout(uPD98401_NOP,CMR);
zwait;
zout(uPD98401_NOP,CMR);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
}
spin_lock_irqsave(&zatm_dev->lock, flags);
zwait;
zout(uPD98401_DEACT_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
uPD98401_CHAN_ADDR_SHIFT),CMR);
zwait;
udelay(10); /* why oh why ... ? */
zout(uPD98401_CLOSE_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
uPD98401_CHAN_ADDR_SHIFT),CMR);
zwait;
if (!(zin(CMR) & uPD98401_CHAN_ADDR))
printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel "
"%d\n",vcc->dev->number,zatm_vcc->rx_chan);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
zatm_dev->rx_map[zatm_vcc->rx_chan] = NULL;
zatm_vcc->rx_chan = 0;
unuse_pool(vcc->dev,zatm_vcc->pool);
}
static int start_rx(struct atm_dev *dev)
{
struct zatm_dev *zatm_dev;
ATM-ZeitNet: Replace one kzalloc() call by kcalloc() * The script "checkpatch.pl" can point information out like the following. WARNING: Prefer kcalloc over kzalloc with multiply Thus fix the affected source code place. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. * Delete the local variable "size" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 16:21:15 +08:00
int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ATM-ZeitNet: Fix indentation for one DPRINTK() call in start_rx() Adjust the indentation for a call of the macro "DPRINTK" in this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 16:38:04 +08:00
DPRINTK("start_rx\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
zatm_dev = ZATM_DEV(dev);
ATM-ZeitNet: Replace one kzalloc() call by kcalloc() * The script "checkpatch.pl" can point information out like the following. WARNING: Prefer kcalloc over kzalloc with multiply Thus fix the affected source code place. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. * Delete the local variable "size" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 16:21:15 +08:00
zatm_dev->rx_map = kcalloc(zatm_dev->chans,
sizeof(*zatm_dev->rx_map),
GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!zatm_dev->rx_map) return -ENOMEM;
/* set VPI/VCI split (use all VCIs and give what's left to VPIs) */
zpokel(zatm_dev,(1 << dev->ci_range.vci_bits)-1,uPD98401_VRR);
/* prepare free buffer pools */
for (i = 0; i <= ZATM_LAST_POOL; i++) {
zatm_dev->pool_info[i].ref_count = 0;
zatm_dev->pool_info[i].rqa_count = 0;
zatm_dev->pool_info[i].rqu_count = 0;
zatm_dev->pool_info[i].low_water = LOW_MARK;
zatm_dev->pool_info[i].high_water = HIGH_MARK;
zatm_dev->pool_info[i].offset = 0;
zatm_dev->pool_info[i].next_off = 0;
zatm_dev->pool_info[i].next_cnt = 0;
zatm_dev->pool_info[i].next_thres = OFF_CNG_THRES;
}
return 0;
}
/*----------------------------------- TX ------------------------------------*/
static int do_tx(struct sk_buff *skb)
{
struct atm_vcc *vcc;
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
u32 *dsc;
unsigned long flags;
EVENT("do_tx\n",0,0);
DPRINTK("sending skb %p\n",skb);
vcc = ATM_SKB(skb)->vcc;
zatm_dev = ZATM_DEV(vcc->dev);
zatm_vcc = ZATM_VCC(vcc);
EVENT("iovcnt=%d\n",skb_shinfo(skb)->nr_frags,0);
spin_lock_irqsave(&zatm_dev->lock, flags);
if (!skb_shinfo(skb)->nr_frags) {
if (zatm_vcc->txing == RING_ENTRIES-1) {
spin_unlock_irqrestore(&zatm_dev->lock, flags);
return RING_BUSY;
}
zatm_vcc->txing++;
dsc = zatm_vcc->ring+zatm_vcc->ring_curr;
zatm_vcc->ring_curr = (zatm_vcc->ring_curr+RING_WORDS) &
(RING_ENTRIES*RING_WORDS-1);
dsc[1] = 0;
dsc[2] = skb->len;
dsc[3] = virt_to_bus(skb->data);
mb();
dsc[0] = uPD98401_TXPD_V | uPD98401_TXPD_DP | uPD98401_TXPD_SM
| (vcc->qos.aal == ATM_AAL5 ? uPD98401_TXPD_AAL5 : 0 |
(ATM_SKB(skb)->atm_options & ATM_ATMOPT_CLP ?
uPD98401_CLPM_1 : uPD98401_CLPM_0));
EVENT("dsc (0x%lx)\n",(unsigned long) dsc,0);
}
else {
printk("NONONONOO!!!!\n");
dsc = NULL;
#if 0
u32 *put;
int i;
[ATM]: Remove unneeded kmalloc() return value casts + tiny whitespace cleanup Small cleanups for drivers/atm/zatm.c Get rid of unneeded cast of kmalloc() return value. Small whitespace/CodingStyle/formatting cleanup (since I was in there anyway). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-11 05:09:01 +08:00
dsc = kmalloc(uPD98401_TXPD_SIZE * 2 +
uPD98401_TXBD_SIZE * ATM_SKB(skb)->iovcnt, GFP_ATOMIC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!dsc) {
[ATM]: Remove unneeded kmalloc() return value casts + tiny whitespace cleanup Small cleanups for drivers/atm/zatm.c Get rid of unneeded cast of kmalloc() return value. Small whitespace/CodingStyle/formatting cleanup (since I was in there anyway). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-11 05:09:01 +08:00
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_irq(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EAGAIN;
}
/* @@@ should check alignment */
put = dsc+8;
dsc[0] = uPD98401_TXPD_V | uPD98401_TXPD_DP |
(vcc->aal == ATM_AAL5 ? uPD98401_TXPD_AAL5 : 0 |
(ATM_SKB(skb)->atm_options & ATM_ATMOPT_CLP ?
uPD98401_CLPM_1 : uPD98401_CLPM_0));
dsc[1] = 0;
[ATM]: Remove unneeded kmalloc() return value casts + tiny whitespace cleanup Small cleanups for drivers/atm/zatm.c Get rid of unneeded cast of kmalloc() return value. Small whitespace/CodingStyle/formatting cleanup (since I was in there anyway). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-11 05:09:01 +08:00
dsc[2] = ATM_SKB(skb)->iovcnt * uPD98401_TXBD_SIZE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dsc[3] = virt_to_bus(put);
for (i = 0; i < ATM_SKB(skb)->iovcnt; i++) {
*put++ = ((struct iovec *) skb->data)[i].iov_len;
*put++ = virt_to_bus(((struct iovec *)
skb->data)[i].iov_base);
}
put[-2] |= uPD98401_TXBD_LAST;
#endif
}
ZATM_PRV_DSC(skb) = dsc;
skb_queue_tail(&zatm_vcc->tx_queue,skb);
DPRINTK("QRP=0x%08lx\n",zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
uPD98401_TXVC_QRP));
zwait;
zout(uPD98401_TX_READY | (zatm_vcc->tx_chan <<
uPD98401_CHAN_ADDR_SHIFT),CMR);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
EVENT("done\n",0,0);
return 0;
}
static inline void dequeue_tx(struct atm_vcc *vcc)
{
struct zatm_vcc *zatm_vcc;
struct sk_buff *skb;
EVENT("dequeue_tx\n",0,0);
zatm_vcc = ZATM_VCC(vcc);
skb = skb_dequeue(&zatm_vcc->tx_queue);
if (!skb) {
printk(KERN_CRIT DEV_LABEL "(itf %d): dequeue_tx but not "
"txing\n",vcc->dev->number);
return;
}
#if 0 /* @@@ would fail on CLP */
if (*ZATM_PRV_DSC(skb) != (uPD98401_TXPD_V | uPD98401_TXPD_DP |
uPD98401_TXPD_SM | uPD98401_TXPD_AAL5)) printk("@#*$!!!! (%08x)\n",
*ZATM_PRV_DSC(skb));
#endif
*ZATM_PRV_DSC(skb) = 0; /* mark as invalid */
zatm_vcc->txing--;
if (vcc->pop) vcc->pop(vcc,skb);
else dev_kfree_skb_irq(skb);
while ((skb = skb_dequeue(&zatm_vcc->backlog)))
if (do_tx(skb) == RING_BUSY) {
skb_queue_head(&zatm_vcc->backlog,skb);
break;
}
atomic_inc(&vcc->stats->tx);
wake_up(&zatm_vcc->tx_wait);
}
static void poll_tx(struct atm_dev *dev,int mbx)
{
struct zatm_dev *zatm_dev;
unsigned long pos;
u32 x;
EVENT("poll_tx\n",0,0);
zatm_dev = ZATM_DEV(dev);
pos = (zatm_dev->mbx_start[mbx] & ~0xffffUL) | zin(MTA(mbx));
while (x = zin(MWA(mbx)), (pos & 0xffff) != x) {
int chan;
#if 1
u32 data,*addr;
EVENT("MBX: host 0x%lx, nic 0x%x\n",pos,x);
addr = (u32 *) pos;
data = *addr;
chan = (data & uPD98401_TXI_CONN) >> uPD98401_TXI_CONN_SHIFT;
EVENT("addr = 0x%lx, data = 0x%08x,",(unsigned long) addr,
data);
EVENT("chan = %d\n",chan,0);
#else
NO !
chan = (zatm_dev->mbx_start[mbx][pos >> 2] & uPD98401_TXI_CONN)
>> uPD98401_TXI_CONN_SHIFT;
#endif
if (chan < zatm_dev->chans && zatm_dev->tx_map[chan])
dequeue_tx(zatm_dev->tx_map[chan]);
else {
printk(KERN_CRIT DEV_LABEL "(itf %d): TX indication "
"for non-existing channel %d\n",dev->number,chan);
event_dump();
}
if (((pos += 4) & 0xffff) == zatm_dev->mbx_end[mbx])
pos = zatm_dev->mbx_start[mbx];
}
zout(pos & 0xffff,MTA(mbx));
}
/*
* BUG BUG BUG: Doesn't handle "new-style" rate specification yet.
*/
static int alloc_shaper(struct atm_dev *dev,int *pcr,int min,int max,int ubr)
{
struct zatm_dev *zatm_dev;
unsigned long flags;
unsigned long i,m,c;
int shaper;
DPRINTK("alloc_shaper (min = %d, max = %d)\n",min,max);
zatm_dev = ZATM_DEV(dev);
if (!zatm_dev->free_shapers) return -EAGAIN;
for (shaper = 0; !((zatm_dev->free_shapers >> shaper) & 1); shaper++);
zatm_dev->free_shapers &= ~1 << shaper;
if (ubr) {
c = 5;
i = m = 1;
zatm_dev->ubr_ref_cnt++;
zatm_dev->ubr = shaper;
[ATM]: [zatm] always *pcr in alloc_shaper() Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04 07:28:31 +08:00
*pcr = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
else {
if (min) {
if (min <= 255) {
i = min;
m = ATM_OC3_PCR;
}
else {
i = 255;
m = ATM_OC3_PCR*255/min;
}
}
else {
if (max > zatm_dev->tx_bw) max = zatm_dev->tx_bw;
if (max <= 255) {
i = max;
m = ATM_OC3_PCR;
}
else {
i = 255;
drivers/atm: Use DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. In the case of the file drivers/atm/eni.c, I am a little bit suspicious of the -1 at the end of the affected expression. Please check that that is what is wanted. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-23 10:22:58 +08:00
m = DIV_ROUND_UP(ATM_OC3_PCR*255, max);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
if (i > m) {
printk(KERN_CRIT DEV_LABEL "shaper algorithm botched "
"[%d,%d] -> i=%ld,m=%ld\n",min,max,i,m);
m = i;
}
*pcr = i*ATM_OC3_PCR/m;
c = 20; /* @@@ should use max_cdv ! */
if ((min && *pcr < min) || (max && *pcr > max)) return -EINVAL;
if (zatm_dev->tx_bw < *pcr) return -EAGAIN;
zatm_dev->tx_bw -= *pcr;
}
spin_lock_irqsave(&zatm_dev->lock, flags);
DPRINTK("i = %d, m = %d, PCR = %d\n",i,m,*pcr);
zpokel(zatm_dev,(i << uPD98401_IM_I_SHIFT) | m,uPD98401_IM(shaper));
zpokel(zatm_dev,c << uPD98401_PC_C_SHIFT,uPD98401_PC(shaper));
zpokel(zatm_dev,0,uPD98401_X(shaper));
zpokel(zatm_dev,0,uPD98401_Y(shaper));
zpokel(zatm_dev,uPD98401_PS_E,uPD98401_PS(shaper));
spin_unlock_irqrestore(&zatm_dev->lock, flags);
return shaper;
}
static void dealloc_shaper(struct atm_dev *dev,int shaper)
{
struct zatm_dev *zatm_dev;
unsigned long flags;
zatm_dev = ZATM_DEV(dev);
if (shaper == zatm_dev->ubr) {
if (--zatm_dev->ubr_ref_cnt) return;
zatm_dev->ubr = -1;
}
spin_lock_irqsave(&zatm_dev->lock, flags);
zpokel(zatm_dev,zpeekl(zatm_dev,uPD98401_PS(shaper)) & ~uPD98401_PS_E,
uPD98401_PS(shaper));
spin_unlock_irqrestore(&zatm_dev->lock, flags);
zatm_dev->free_shapers |= 1 << shaper;
}
static void close_tx(struct atm_vcc *vcc)
{
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
unsigned long flags;
int chan;
zatm_vcc = ZATM_VCC(vcc);
zatm_dev = ZATM_DEV(vcc->dev);
chan = zatm_vcc->tx_chan;
if (!chan) return;
DPRINTK("close_tx\n");
if (skb_peek(&zatm_vcc->backlog)) {
printk("waiting for backlog to drain ...\n");
event_dump();
wait_event(zatm_vcc->tx_wait, !skb_peek(&zatm_vcc->backlog));
}
if (skb_peek(&zatm_vcc->tx_queue)) {
printk("waiting for TX queue to drain ...\n");
event_dump();
wait_event(zatm_vcc->tx_wait, !skb_peek(&zatm_vcc->tx_queue));
}
spin_lock_irqsave(&zatm_dev->lock, flags);
#if 0
zwait;
zout(uPD98401_DEACT_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
#endif
zwait;
zout(uPD98401_CLOSE_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
zwait;
if (!(zin(CMR) & uPD98401_CHAN_ADDR))
printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel "
"%d\n",vcc->dev->number,chan);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
zatm_vcc->tx_chan = 0;
zatm_dev->tx_map[chan] = NULL;
if (zatm_vcc->shaper != zatm_dev->ubr) {
zatm_dev->tx_bw += vcc->qos.txtp.min_pcr;
dealloc_shaper(vcc->dev,zatm_vcc->shaper);
}
[ATM]: [drivers] kill pointless NULL checks and casts before kfree() Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-03 04:04:07 +08:00
kfree(zatm_vcc->ring);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static int open_tx_first(struct atm_vcc *vcc)
{
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
unsigned long flags;
u32 *loop;
unsigned short chan;
drivers/*: mark variables with uninitialized_var() Mark variables in drivers/* with uninitialized_var() if such a warning appears, and analysis proves that the var is initialized properly on all paths it is used. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17 17:39:58 +08:00
int unlimited;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
DPRINTK("open_tx_first\n");
zatm_dev = ZATM_DEV(vcc->dev);
zatm_vcc = ZATM_VCC(vcc);
zatm_vcc->tx_chan = 0;
if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0;
spin_lock_irqsave(&zatm_dev->lock, flags);
zwait;
zout(uPD98401_OPEN_CHAN,CMR);
zwait;
DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
spin_unlock_irqrestore(&zatm_dev->lock, flags);
DPRINTK("chan is %d\n",chan);
if (!chan) return -EAGAIN;
unlimited = vcc->qos.txtp.traffic_class == ATM_UBR &&
(!vcc->qos.txtp.max_pcr || vcc->qos.txtp.max_pcr == ATM_MAX_PCR ||
vcc->qos.txtp.max_pcr >= ATM_OC3_PCR);
if (unlimited && zatm_dev->ubr != -1) zatm_vcc->shaper = zatm_dev->ubr;
else {
drivers/*: mark variables with uninitialized_var() Mark variables in drivers/* with uninitialized_var() if such a warning appears, and analysis proves that the var is initialized properly on all paths it is used. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17 17:39:58 +08:00
int uninitialized_var(pcr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (unlimited) vcc->qos.txtp.max_sdu = ATM_MAX_AAL5_PDU;
if ((zatm_vcc->shaper = alloc_shaper(vcc->dev,&pcr,
vcc->qos.txtp.min_pcr,vcc->qos.txtp.max_pcr,unlimited))
< 0) {
close_tx(vcc);
return zatm_vcc->shaper;
}
if (pcr > ATM_OC3_PCR) pcr = ATM_OC3_PCR;
vcc->qos.txtp.min_pcr = vcc->qos.txtp.max_pcr = pcr;
}
zatm_vcc->tx_chan = chan;
skb_queue_head_init(&zatm_vcc->tx_queue);
init_waitqueue_head(&zatm_vcc->tx_wait);
/* initialize ring */
[ATM]: kmalloc to kzalloc patches for drivers/atm Signed-off-by: Om Narasimhan <om.turyx@gmail.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04 07:27:18 +08:00
zatm_vcc->ring = kzalloc(RING_SIZE,GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!zatm_vcc->ring) return -ENOMEM;
loop = zatm_vcc->ring+RING_ENTRIES*RING_WORDS;
loop[0] = uPD98401_TXPD_V;
loop[1] = loop[2] = 0;
loop[3] = virt_to_bus(zatm_vcc->ring);
zatm_vcc->ring_curr = 0;
zatm_vcc->txing = 0;
skb_queue_head_init(&zatm_vcc->backlog);
zpokel(zatm_dev,virt_to_bus(zatm_vcc->ring),
chan*VC_SIZE/4+uPD98401_TXVC_QRP);
return 0;
}
static int open_tx_second(struct atm_vcc *vcc)
{
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
unsigned long flags;
DPRINTK("open_tx_second\n");
zatm_dev = ZATM_DEV(vcc->dev);
zatm_vcc = ZATM_VCC(vcc);
if (!zatm_vcc->tx_chan) return 0;
/* set up VC descriptor */
spin_lock_irqsave(&zatm_dev->lock, flags);
zpokel(zatm_dev,0,zatm_vcc->tx_chan*VC_SIZE/4);
zpokel(zatm_dev,uPD98401_TXVC_L | (zatm_vcc->shaper <<
uPD98401_TXVC_SHP_SHIFT) | (vcc->vpi << uPD98401_TXVC_VPI_SHIFT) |
vcc->vci,zatm_vcc->tx_chan*VC_SIZE/4+1);
zpokel(zatm_dev,0,zatm_vcc->tx_chan*VC_SIZE/4+2);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
zatm_dev->tx_map[zatm_vcc->tx_chan] = vcc;
return 0;
}
static int start_tx(struct atm_dev *dev)
{
struct zatm_dev *zatm_dev;
int i;
DPRINTK("start_tx\n");
zatm_dev = ZATM_DEV(dev);
ATM-ZeitNet: Use kmalloc_array() in start_tx() * A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 15:55:53 +08:00
zatm_dev->tx_map = kmalloc_array(zatm_dev->chans,
sizeof(*zatm_dev->tx_map),
GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!zatm_dev->tx_map) return -ENOMEM;
zatm_dev->tx_bw = ATM_OC3_PCR;
zatm_dev->free_shapers = (1 << NR_SHAPERS)-1;
zatm_dev->ubr = -1;
zatm_dev->ubr_ref_cnt = 0;
/* initialize shapers */
for (i = 0; i < NR_SHAPERS; i++) zpokel(zatm_dev,0,uPD98401_PS(i));
return 0;
}
/*------------------------------- interrupts --------------------------------*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t zatm_int(int irq,void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct atm_dev *dev;
struct zatm_dev *zatm_dev;
u32 reason;
int handled = 0;
dev = dev_id;
zatm_dev = ZATM_DEV(dev);
while ((reason = zin(GSR))) {
handled = 1;
EVENT("reason 0x%x\n",reason,0);
if (reason & uPD98401_INT_PI) {
EVENT("PHY int\n",0,0);
dev->phy->interrupt(dev);
}
if (reason & uPD98401_INT_RQA) {
unsigned long pools;
int i;
pools = zin(RQA);
EVENT("RQA (0x%08x)\n",pools,0);
for (i = 0; pools; i++) {
if (pools & 1) {
refill_pool(dev,i);
zatm_dev->pool_info[i].rqa_count++;
}
pools >>= 1;
}
}
if (reason & uPD98401_INT_RQU) {
unsigned long pools;
int i;
pools = zin(RQU);
printk(KERN_WARNING DEV_LABEL "(itf %d): RQU 0x%08lx\n",
dev->number,pools);
event_dump();
for (i = 0; pools; i++) {
if (pools & 1) {
refill_pool(dev,i);
zatm_dev->pool_info[i].rqu_count++;
}
pools >>= 1;
}
}
/* don't handle RD */
if (reason & uPD98401_INT_SPE)
printk(KERN_ALERT DEV_LABEL "(itf %d): system parity "
"error at 0x%08x\n",dev->number,zin(ADDR));
if (reason & uPD98401_INT_CPE)
printk(KERN_ALERT DEV_LABEL "(itf %d): control memory "
"parity error at 0x%08x\n",dev->number,zin(ADDR));
if (reason & uPD98401_INT_SBE) {
printk(KERN_ALERT DEV_LABEL "(itf %d): system bus "
"error at 0x%08x\n",dev->number,zin(ADDR));
event_dump();
}
/* don't handle IND */
if (reason & uPD98401_INT_MF) {
printk(KERN_CRIT DEV_LABEL "(itf %d): mailbox full "
"(0x%x)\n",dev->number,(reason & uPD98401_INT_MF)
>> uPD98401_INT_MF_SHIFT);
event_dump();
/* @@@ should try to recover */
}
if (reason & uPD98401_INT_MM) {
if (reason & 1) poll_rx(dev,0);
if (reason & 2) poll_rx(dev,1);
if (reason & 4) poll_tx(dev,2);
if (reason & 8) poll_tx(dev,3);
}
/* @@@ handle RCRn */
}
return IRQ_RETVAL(handled);
}
/*----------------------------- (E)EPROM access -----------------------------*/
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void eprom_set(struct zatm_dev *zatm_dev, unsigned long value,
unsigned short cmd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int error;
if ((error = pci_write_config_dword(zatm_dev->pci_dev,cmd,value)))
printk(KERN_ERR DEV_LABEL ": PCI write failed (0x%02x)\n",
error);
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static unsigned long eprom_get(struct zatm_dev *zatm_dev, unsigned short cmd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned int value;
int error;
if ((error = pci_read_config_dword(zatm_dev->pci_dev,cmd,&value)))
printk(KERN_ERR DEV_LABEL ": PCI read failed (0x%02x)\n",
error);
return value;
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void eprom_put_bits(struct zatm_dev *zatm_dev, unsigned long data,
int bits, unsigned short cmd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned long value;
int i;
for (i = bits-1; i >= 0; i--) {
value = ZEPROM_CS | (((data >> i) & 1) ? ZEPROM_DI : 0);
eprom_set(zatm_dev,value,cmd);
eprom_set(zatm_dev,value | ZEPROM_SK,cmd);
eprom_set(zatm_dev,value,cmd);
}
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void eprom_get_byte(struct zatm_dev *zatm_dev, unsigned char *byte,
unsigned short cmd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int i;
*byte = 0;
for (i = 8; i; i--) {
eprom_set(zatm_dev,ZEPROM_CS,cmd);
eprom_set(zatm_dev,ZEPROM_CS | ZEPROM_SK,cmd);
*byte <<= 1;
if (eprom_get(zatm_dev,cmd) & ZEPROM_DO) *byte |= 1;
eprom_set(zatm_dev,ZEPROM_CS,cmd);
}
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static unsigned char eprom_try_esi(struct atm_dev *dev, unsigned short cmd,
int offset, int swap)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned char buf[ZEPROM_SIZE];
struct zatm_dev *zatm_dev;
int i;
zatm_dev = ZATM_DEV(dev);
for (i = 0; i < ZEPROM_SIZE; i += 2) {
eprom_set(zatm_dev,ZEPROM_CS,cmd); /* select EPROM */
eprom_put_bits(zatm_dev,ZEPROM_CMD_READ,ZEPROM_CMD_LEN,cmd);
eprom_put_bits(zatm_dev,i >> 1,ZEPROM_ADDR_LEN,cmd);
eprom_get_byte(zatm_dev,buf+i+swap,cmd);
eprom_get_byte(zatm_dev,buf+i+1-swap,cmd);
eprom_set(zatm_dev,0,cmd); /* deselect EPROM */
}
memcpy(dev->esi,buf+offset,ESI_LEN);
return memcmp(dev->esi,"\0\0\0\0\0",ESI_LEN); /* assumes ESI_LEN == 6 */
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void eprom_get_esi(struct atm_dev *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
if (eprom_try_esi(dev,ZEPROM_V1_REG,ZEPROM_V1_ESI_OFF,1)) return;
(void) eprom_try_esi(dev,ZEPROM_V2_REG,ZEPROM_V2_ESI_OFF,0);
}
/*--------------------------------- entries ---------------------------------*/
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int zatm_init(struct atm_dev *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct zatm_dev *zatm_dev;
struct pci_dev *pci_dev;
unsigned short command;
int error,i,last;
unsigned long t0,t1,t2;
DPRINTK(">zatm_init\n");
zatm_dev = ZATM_DEV(dev);
spin_lock_init(&zatm_dev->lock);
pci_dev = zatm_dev->pci_dev;
zatm_dev->base = pci_resource_start(pci_dev, 0);
zatm_dev->irq = pci_dev->irq;
PCI: Change all drivers to use pci_device->revision Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 06:46:36 +08:00
if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
dev->number,error);
return -EINVAL;
}
if ((error = pci_write_config_word(pci_dev,PCI_COMMAND,
command | PCI_COMMAND_IO | PCI_COMMAND_MASTER))) {
printk(KERN_ERR DEV_LABEL "(itf %d): can't enable IO (0x%02x)"
"\n",dev->number,error);
return -EIO;
}
eprom_get_esi(dev);
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,",
PCI: Change all drivers to use pci_device->revision Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 06:46:36 +08:00
dev->number,pci_dev->revision,zatm_dev->base,zatm_dev->irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* reset uPD98401 */
zout(0,SWR);
while (!(zin(GSR) & uPD98401_INT_IND));
zout(uPD98401_GMR_ONE /*uPD98401_BURST4*/,GMR);
last = MAX_CRAM_SIZE;
for (i = last-RAM_INCREMENT; i >= 0; i -= RAM_INCREMENT) {
zpokel(zatm_dev,0x55555555,i);
if (zpeekl(zatm_dev,i) != 0x55555555) last = i;
else {
zpokel(zatm_dev,0xAAAAAAAA,i);
if (zpeekl(zatm_dev,i) != 0xAAAAAAAA) last = i;
else zpokel(zatm_dev,i,i);
}
}
for (i = 0; i < last; i += RAM_INCREMENT)
if (zpeekl(zatm_dev,i) != i) break;
zatm_dev->mem = i << 2;
while (i) zpokel(zatm_dev,0,--i);
/* reset again to rebuild memory pointers */
zout(0,SWR);
while (!(zin(GSR) & uPD98401_INT_IND));
zout(uPD98401_GMR_ONE | uPD98401_BURST8 | uPD98401_BURST4 |
uPD98401_BURST2 | uPD98401_GMR_PM | uPD98401_GMR_DR,GMR);
/* TODO: should shrink allocation now */
printk("mem=%dkB,%s (",zatm_dev->mem >> 10,zatm_dev->copper ? "UTP" :
"MMF");
for (i = 0; i < ESI_LEN; i++)
printk("%02X%s",dev->esi[i],i == ESI_LEN-1 ? ")\n" : "-");
do {
unsigned long flags;
spin_lock_irqsave(&zatm_dev->lock, flags);
t0 = zpeekl(zatm_dev,uPD98401_TSR);
udelay(10);
t1 = zpeekl(zatm_dev,uPD98401_TSR);
udelay(1010);
t2 = zpeekl(zatm_dev,uPD98401_TSR);
spin_unlock_irqrestore(&zatm_dev->lock, flags);
}
while (t0 > t1 || t1 > t2); /* loop if wrapping ... */
zatm_dev->khz = t2-2*t1+t0;
printk(KERN_NOTICE DEV_LABEL "(itf %d): uPD98401 %d.%d at %d.%03d "
"MHz\n",dev->number,
(zin(VER) & uPD98401_MAJOR) >> uPD98401_MAJOR_SHIFT,
zin(VER) & uPD98401_MINOR,zatm_dev->khz/1000,zatm_dev->khz % 1000);
return uPD98402_init(dev);
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int zatm_start(struct atm_dev *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
struct zatm_dev *zatm_dev = ZATM_DEV(dev);
struct pci_dev *pdev = zatm_dev->pci_dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned long curr;
int pools,vccs,rx;
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
int error, i, ld;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
DPRINTK("zatm_start\n");
zatm_dev->rx_map = zatm_dev->tx_map = NULL;
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
for (i = 0; i < NR_MBX; i++)
zatm_dev->mbx_start[i] = 0;
[PATCH] irq-flags: misc drivers: Use the new IRQF_ constants Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 10:29:38 +08:00
error = request_irq(zatm_dev->irq, zatm_int, IRQF_SHARED, DEV_LABEL, dev);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
if (error < 0) {
printk(KERN_ERR DEV_LABEL "(itf %d): IRQ%d is already in use\n",
dev->number,zatm_dev->irq);
goto done;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* define memory regions */
pools = NR_POOLS;
if (NR_SHAPERS*SHAPER_SIZE > pools*POOL_SIZE)
pools = NR_SHAPERS*SHAPER_SIZE/POOL_SIZE;
vccs = (zatm_dev->mem-NR_SHAPERS*SHAPER_SIZE-pools*POOL_SIZE)/
(2*VC_SIZE+RX_SIZE);
ld = -1;
for (rx = 1; rx < vccs; rx <<= 1) ld++;
dev->ci_range.vpi_bits = 0; /* @@@ no VPI for now */
dev->ci_range.vci_bits = ld;
dev->link_rate = ATM_OC3_PCR;
zatm_dev->chans = vccs; /* ??? */
curr = rx*RX_SIZE/4;
DPRINTK("RX pool 0x%08lx\n",curr);
zpokel(zatm_dev,curr,uPD98401_PMA); /* receive pool */
zatm_dev->pool_base = curr;
curr += pools*POOL_SIZE/4;
DPRINTK("Shapers 0x%08lx\n",curr);
zpokel(zatm_dev,curr,uPD98401_SMA); /* shapers */
curr += NR_SHAPERS*SHAPER_SIZE/4;
DPRINTK("Free 0x%08lx\n",curr);
zpokel(zatm_dev,curr,uPD98401_TOS); /* free pool */
printk(KERN_INFO DEV_LABEL "(itf %d): %d shapers, %d pools, %d RX, "
"%ld VCs\n",dev->number,NR_SHAPERS,pools,rx,
(zatm_dev->mem-curr*4)/VC_SIZE);
/* create mailboxes */
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
for (i = 0; i < NR_MBX; i++) {
void *mbx;
dma_addr_t mbx_dma;
if (!mbx_entries[i])
continue;
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
mbx = dma_alloc_coherent(&pdev->dev,
2 * MBX_SIZE(i), &mbx_dma, GFP_KERNEL);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
if (!mbx) {
error = -ENOMEM;
goto out;
}
/*
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
* Alignment provided by dma_alloc_coherent() isn't enough
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
* for this device.
*/
if (((unsigned long)mbx ^ mbx_dma) & 0xffff) {
printk(KERN_ERR DEV_LABEL "(itf %d): system "
"bus incompatible with driver\n", dev->number);
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&pdev->dev, 2*MBX_SIZE(i), mbx, mbx_dma);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
error = -ENODEV;
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
DPRINTK("mbx@0x%08lx-0x%08lx\n", mbx, mbx + MBX_SIZE(i));
zatm_dev->mbx_start[i] = (unsigned long)mbx;
zatm_dev->mbx_dma[i] = mbx_dma;
zatm_dev->mbx_end[i] = (zatm_dev->mbx_start[i] + MBX_SIZE(i)) &
0xffff;
zout(mbx_dma >> 16, MSH(i));
zout(mbx_dma, MSL(i));
zout(zatm_dev->mbx_end[i], MBA(i));
zout((unsigned long)mbx & 0xffff, MTA(i));
zout((unsigned long)mbx & 0xffff, MWA(i));
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
error = start_tx(dev);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
if (error)
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
error = start_rx(dev);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
if (error)
goto out_tx;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
error = dev->phy->start(dev);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
if (error)
goto out_rx;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
zout(0xffffffff,IMR); /* enable interrupts */
/* enable TX & RX */
zout(zin(GMR) | uPD98401_GMR_SE | uPD98401_GMR_RE,GMR);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
done:
return error;
out_rx:
[ATM]: [drivers] kill pointless NULL checks and casts before kfree() Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-03 04:04:07 +08:00
kfree(zatm_dev->rx_map);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
out_tx:
[ATM]: [drivers] kill pointless NULL checks and casts before kfree() Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-03 04:04:07 +08:00
kfree(zatm_dev->tx_map);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
out:
while (i-- > 0) {
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&pdev->dev, 2 * MBX_SIZE(i),
(void *)zatm_dev->mbx_start[i],
zatm_dev->mbx_dma[i]);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
free_irq(zatm_dev->irq, dev);
[ATM]: zatm: mailbox converted to pci_alloc_consistent() mailbox converted to pci_alloc_consistent() - request_region() is not needed: zatm_init_one() issues pci_request_regions(); - the warning related to kfree(zatm_dev->mbx_start) disappears; Compiled with i386 and sparc64 as target. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-21 03:01:46 +08:00
goto done;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void zatm_close(struct atm_vcc *vcc)
{
DPRINTK(">zatm_close\n");
if (!ZATM_VCC(vcc)) return;
clear_bit(ATM_VF_READY,&vcc->flags);
close_rx(vcc);
EVENT("close_tx\n",0,0);
close_tx(vcc);
DPRINTK("zatm_close: done waiting\n");
/* deallocate memory */
kfree(ZATM_VCC(vcc));
vcc->dev_data = NULL;
clear_bit(ATM_VF_ADDR,&vcc->flags);
}
static int zatm_open(struct atm_vcc *vcc)
{
struct zatm_dev *zatm_dev;
struct zatm_vcc *zatm_vcc;
short vpi = vcc->vpi;
int vci = vcc->vci;
int error;
DPRINTK(">zatm_open\n");
zatm_dev = ZATM_DEV(vcc->dev);
if (!test_bit(ATM_VF_PARTIAL,&vcc->flags))
vcc->dev_data = NULL;
if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC)
set_bit(ATM_VF_ADDR,&vcc->flags);
if (vcc->qos.aal != ATM_AAL5) return -EINVAL; /* @@@ AAL0 */
DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n",vcc->dev->number,vcc->vpi,
vcc->vci);
if (!test_bit(ATM_VF_PARTIAL,&vcc->flags)) {
ATM-ZeitNet: Improve a size determination in zatm_open() Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 16:07:38 +08:00
zatm_vcc = kmalloc(sizeof(*zatm_vcc), GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!zatm_vcc) {
clear_bit(ATM_VF_ADDR,&vcc->flags);
return -ENOMEM;
}
vcc->dev_data = zatm_vcc;
ZATM_VCC(vcc)->tx_chan = 0; /* for zatm_close after open_rx */
if ((error = open_rx_first(vcc))) {
zatm_close(vcc);
return error;
}
if ((error = open_tx_first(vcc))) {
zatm_close(vcc);
return error;
}
}
if (vci == ATM_VPI_UNSPEC || vpi == ATM_VCI_UNSPEC) return 0;
if ((error = open_rx_second(vcc))) {
zatm_close(vcc);
return error;
}
if ((error = open_tx_second(vcc))) {
zatm_close(vcc);
return error;
}
set_bit(ATM_VF_READY,&vcc->flags);
return 0;
}
static int zatm_change_qos(struct atm_vcc *vcc,struct atm_qos *qos,int flags)
{
printk("Not yet implemented\n");
return -ENOSYS;
/* @@@ */
}
static int zatm_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
{
struct zatm_dev *zatm_dev;
unsigned long flags;
zatm_dev = ZATM_DEV(dev);
switch (cmd) {
case ZATM_GETPOOLZ:
if (!capable(CAP_NET_ADMIN)) return -EPERM;
/* fall through */
case ZATM_GETPOOL:
{
struct zatm_pool_info info;
int pool;
if (get_user(pool,
&((struct zatm_pool_req __user *) arg)->pool_num))
return -EFAULT;
if (pool < 0 || pool > ZATM_LAST_POOL)
return -EINVAL;
spin_lock_irqsave(&zatm_dev->lock, flags);
info = zatm_dev->pool_info[pool];
if (cmd == ZATM_GETPOOLZ) {
zatm_dev->pool_info[pool].rqa_count = 0;
zatm_dev->pool_info[pool].rqu_count = 0;
}
spin_unlock_irqrestore(&zatm_dev->lock, flags);
return copy_to_user(
&((struct zatm_pool_req __user *) arg)->info,
&info,sizeof(info)) ? -EFAULT : 0;
}
case ZATM_SETPOOL:
{
struct zatm_pool_info info;
int pool;
if (!capable(CAP_NET_ADMIN)) return -EPERM;
if (get_user(pool,
&((struct zatm_pool_req __user *) arg)->pool_num))
return -EFAULT;
if (pool < 0 || pool > ZATM_LAST_POOL)
return -EINVAL;
if (copy_from_user(&info,
&((struct zatm_pool_req __user *) arg)->info,
sizeof(info))) return -EFAULT;
if (!info.low_water)
info.low_water = zatm_dev->
pool_info[pool].low_water;
if (!info.high_water)
info.high_water = zatm_dev->
pool_info[pool].high_water;
if (!info.next_thres)
info.next_thres = zatm_dev->
pool_info[pool].next_thres;
if (info.low_water >= info.high_water ||
info.low_water < 0)
return -EINVAL;
spin_lock_irqsave(&zatm_dev->lock, flags);
zatm_dev->pool_info[pool].low_water =
info.low_water;
zatm_dev->pool_info[pool].high_water =
info.high_water;
zatm_dev->pool_info[pool].next_thres =
info.next_thres;
spin_unlock_irqrestore(&zatm_dev->lock, flags);
return 0;
}
default:
if (!dev->phy->ioctl) return -ENOIOCTLCMD;
return dev->phy->ioctl(dev,cmd,arg);
}
}
static int zatm_getsockopt(struct atm_vcc *vcc,int level,int optname,
void __user *optval,int optlen)
{
return -EINVAL;
}
static int zatm_setsockopt(struct atm_vcc *vcc,int level,int optname,
net: Make setsockopt() optlen be unsigned. This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-01 07:12:20 +08:00
void __user *optval,unsigned int optlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
return -EINVAL;
}
static int zatm_send(struct atm_vcc *vcc,struct sk_buff *skb)
{
int error;
EVENT(">zatm_send 0x%lx\n",(unsigned long) skb,0);
if (!ZATM_VCC(vcc)->tx_chan || !test_bit(ATM_VF_READY,&vcc->flags)) {
if (vcc->pop) vcc->pop(vcc,skb);
else dev_kfree_skb(skb);
return -EINVAL;
}
if (!skb) {
printk(KERN_CRIT "!skb in zatm_send ?\n");
if (vcc->pop) vcc->pop(vcc,skb);
return -EINVAL;
}
ATM_SKB(skb)->vcc = vcc;
error = do_tx(skb);
if (error != RING_BUSY) return error;
skb_queue_tail(&ZATM_VCC(vcc)->backlog,skb);
return 0;
}
static void zatm_phy_put(struct atm_dev *dev,unsigned char value,
unsigned long addr)
{
struct zatm_dev *zatm_dev;
zatm_dev = ZATM_DEV(dev);
zwait;
zout(value,CER);
zout(uPD98401_IND_ACC | uPD98401_IA_B0 |
(uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
}
static unsigned char zatm_phy_get(struct atm_dev *dev,unsigned long addr)
{
struct zatm_dev *zatm_dev;
zatm_dev = ZATM_DEV(dev);
zwait;
zout(uPD98401_IND_ACC | uPD98401_IA_B0 | uPD98401_IA_RW |
(uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
zwait;
return zin(CER) & 0xff;
}
static const struct atmdev_ops ops = {
.open = zatm_open,
.close = zatm_close,
.ioctl = zatm_ioctl,
.getsockopt = zatm_getsockopt,
.setsockopt = zatm_setsockopt,
.send = zatm_send,
.phy_put = zatm_phy_put,
.phy_get = zatm_phy_get,
.change_qos = zatm_change_qos,
};
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int zatm_init_one(struct pci_dev *pci_dev,
const struct pci_device_id *ent)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct atm_dev *dev;
struct zatm_dev *zatm_dev;
int ret = -ENOMEM;
[PATCH] getting rid of all casts of k[cmz]alloc() calls Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 16:35:56 +08:00
zatm_dev = kmalloc(sizeof(*zatm_dev), GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!zatm_dev) {
printk(KERN_EMERG "%s: memory shortage\n", DEV_LABEL);
goto out;
}
atm: correct sysfs 'device' link creation and parent relationships The ATM subsystem was incorrectly creating the 'device' link for ATM nodes in sysfs. This led to incorrect device/parent relationships exposed by sysfs and udev. Instead of rolling the 'device' link by hand in the generic ATM code, pass each ATM driver's bus device down to the sysfs code and let sysfs do this stuff correctly. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 03:40:47 +08:00
dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!dev)
goto out_free;
ret = pci_enable_device(pci_dev);
if (ret < 0)
goto out_deregister;
ret = pci_request_regions(pci_dev, DEV_LABEL);
if (ret < 0)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
goto out_disable;
ret = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32));
if (ret < 0)
atm: zatm: Fix an error handling path in 'zatm_init_one()' If 'dma_set_mask_and_coherent()' fails, we must undo the previous 'pci_request_regions()' call. Adjust corresponding 'goto' to jump at the right place of the error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18 01:42:41 +08:00
goto out_release;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
zatm_dev->pci_dev = pci_dev;
dev->dev_data = zatm_dev;
zatm_dev->copper = (int)ent->driver_data;
if ((ret = zatm_init(dev)) || (ret = zatm_start(dev)))
goto out_release;
pci_set_drvdata(pci_dev, dev);
zatm_dev->more = zatm_boards;
zatm_boards = dev;
ret = 0;
out:
return ret;
out_release:
pci_release_regions(pci_dev);
out_disable:
pci_disable_device(pci_dev);
out_deregister:
atm_dev_deregister(dev);
out_free:
kfree(zatm_dev);
goto out;
}
MODULE_LICENSE("GPL");
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static struct pci_device_id zatm_pci_tbl[] = {
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15 16:49:32 +08:00
{ PCI_VDEVICE(ZEITNET, PCI_DEVICE_ID_ZEITNET_1221), ZATM_COPPER },
{ PCI_VDEVICE(ZEITNET, PCI_DEVICE_ID_ZEITNET_1225), 0 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{ 0, }
};
MODULE_DEVICE_TABLE(pci, zatm_pci_tbl);
static struct pci_driver zatm_driver = {
.name = DEV_LABEL,
.id_table = zatm_pci_tbl,
.probe = zatm_init_one,
};
static int __init zatm_init_module(void)
{
return pci_register_driver(&zatm_driver);
}
module_init(zatm_init_module);
/* module_exit not defined so not unloadable */