OpenCloudOS-Kernel/kernel/bpf/cgroup.c

2169 lines
55 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Functions to manage eBPF programs attached to cgroups
*
* Copyright (c) 2016 Daniel Mack
*/
#include <linux/kernel.h>
#include <linux/atomic.h>
#include <linux/cgroup.h>
#include <linux/filter.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/string.h>
#include <linux/bpf.h>
#include <linux/bpf-cgroup.h>
#include <net/sock.h>
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
#include <net/bpf_sk_storage.h>
#include "../cgroup/cgroup-internal.h"
DEFINE_STATIC_KEY_ARRAY_FALSE(cgroup_bpf_enabled_key, MAX_CGROUP_BPF_ATTACH_TYPE);
EXPORT_SYMBOL(cgroup_bpf_enabled_key);
/* __always_inline is necessary to prevent indirect call through run_prog
* function pointer.
*/
static __always_inline int
bpf_prog_run_array_cg(const struct cgroup_bpf *cgrp,
enum cgroup_bpf_attach_type atype,
const void *ctx, bpf_prog_run_fn run_prog,
int retval, u32 *ret_flags)
{
const struct bpf_prog_array_item *item;
const struct bpf_prog *prog;
const struct bpf_prog_array *array;
struct bpf_run_ctx *old_run_ctx;
struct bpf_cg_run_ctx run_ctx;
u32 func_ret;
run_ctx.retval = retval;
migrate_disable();
rcu_read_lock();
array = rcu_dereference(cgrp->effective[atype]);
item = &array->items[0];
old_run_ctx = bpf_set_run_ctx(&run_ctx.run_ctx);
while ((prog = READ_ONCE(item->prog))) {
run_ctx.prog_item = item;
func_ret = run_prog(prog, ctx);
if (ret_flags) {
*(ret_flags) |= (func_ret >> 1);
func_ret &= 1;
}
if (!func_ret && !IS_ERR_VALUE((long)run_ctx.retval))
run_ctx.retval = -EPERM;
item++;
}
bpf_reset_run_ctx(old_run_ctx);
rcu_read_unlock();
migrate_enable();
return run_ctx.retval;
}
bpf: decouple the lifetime of cgroup_bpf from cgroup itself Currently the lifetime of bpf programs attached to a cgroup is bound to the lifetime of the cgroup itself. It means that if a user forgets (or intentionally avoids) to detach a bpf program before removing the cgroup, it will stay attached up to the release of the cgroup. Since the cgroup can stay in the dying state (the state between being rmdir()'ed and being released) for a very long time, it leads to a waste of memory. Also, it blocks a possibility to implement the memcg-based memory accounting for bpf objects, because a circular reference dependency will occur. Charged memory pages are pinning the corresponding memory cgroup, and if the memory cgroup is pinning the attached bpf program, nothing will be ever released. A dying cgroup can not contain any processes, so the only chance for an attached bpf program to be executed is a live socket associated with the cgroup. So in order to release all bpf data early, let's count associated sockets using a new percpu refcounter. On cgroup removal the counter is transitioned to the atomic mode, and as soon as it reaches 0, all bpf programs are detached. Because cgroup_bpf_release() can block, it can't be called from the percpu ref counter callback directly, so instead an asynchronous work is scheduled. The reference counter is not socket specific, and can be used for any other types of programs, which can be executed from a cgroup-bpf hook outside of the process context, had such a need arise in the future. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: jolsa@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-26 00:37:39 +08:00
void cgroup_bpf_offline(struct cgroup *cgrp)
{
cgroup_get(cgrp);
percpu_ref_kill(&cgrp->bpf.refcnt);
}
static void bpf_cgroup_storages_free(struct bpf_cgroup_storage *storages[])
{
enum bpf_cgroup_storage_type stype;
for_each_cgroup_storage_type(stype)
bpf_cgroup_storage_free(storages[stype]);
}
static int bpf_cgroup_storages_alloc(struct bpf_cgroup_storage *storages[],
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
struct bpf_cgroup_storage *new_storages[],
enum bpf_attach_type type,
struct bpf_prog *prog,
struct cgroup *cgrp)
{
enum bpf_cgroup_storage_type stype;
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
struct bpf_cgroup_storage_key key;
struct bpf_map *map;
key.cgroup_inode_id = cgroup_id(cgrp);
key.attach_type = type;
for_each_cgroup_storage_type(stype) {
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
map = prog->aux->cgroup_storage[stype];
if (!map)
continue;
storages[stype] = cgroup_storage_lookup((void *)map, &key, false);
if (storages[stype])
continue;
storages[stype] = bpf_cgroup_storage_alloc(prog, stype);
if (IS_ERR(storages[stype])) {
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
bpf_cgroup_storages_free(new_storages);
return -ENOMEM;
}
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
new_storages[stype] = storages[stype];
}
return 0;
}
static void bpf_cgroup_storages_assign(struct bpf_cgroup_storage *dst[],
struct bpf_cgroup_storage *src[])
{
enum bpf_cgroup_storage_type stype;
for_each_cgroup_storage_type(stype)
dst[stype] = src[stype];
}
static void bpf_cgroup_storages_link(struct bpf_cgroup_storage *storages[],
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
struct cgroup *cgrp,
enum bpf_attach_type attach_type)
{
enum bpf_cgroup_storage_type stype;
for_each_cgroup_storage_type(stype)
bpf_cgroup_storage_link(storages[stype], cgrp, attach_type);
}
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
/* Called when bpf_cgroup_link is auto-detached from dying cgroup.
* It drops cgroup and bpf_prog refcounts, and marks bpf_link as defunct. It
* doesn't free link memory, which will eventually be done by bpf_link's
* release() callback, when its last FD is closed.
*/
static void bpf_cgroup_link_auto_detach(struct bpf_cgroup_link *link)
{
cgroup_put(link->cgroup);
link->cgroup = NULL;
}
/**
bpf: decouple the lifetime of cgroup_bpf from cgroup itself Currently the lifetime of bpf programs attached to a cgroup is bound to the lifetime of the cgroup itself. It means that if a user forgets (or intentionally avoids) to detach a bpf program before removing the cgroup, it will stay attached up to the release of the cgroup. Since the cgroup can stay in the dying state (the state between being rmdir()'ed and being released) for a very long time, it leads to a waste of memory. Also, it blocks a possibility to implement the memcg-based memory accounting for bpf objects, because a circular reference dependency will occur. Charged memory pages are pinning the corresponding memory cgroup, and if the memory cgroup is pinning the attached bpf program, nothing will be ever released. A dying cgroup can not contain any processes, so the only chance for an attached bpf program to be executed is a live socket associated with the cgroup. So in order to release all bpf data early, let's count associated sockets using a new percpu refcounter. On cgroup removal the counter is transitioned to the atomic mode, and as soon as it reaches 0, all bpf programs are detached. Because cgroup_bpf_release() can block, it can't be called from the percpu ref counter callback directly, so instead an asynchronous work is scheduled. The reference counter is not socket specific, and can be used for any other types of programs, which can be executed from a cgroup-bpf hook outside of the process context, had such a need arise in the future. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: jolsa@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-26 00:37:39 +08:00
* cgroup_bpf_release() - put references of all bpf programs and
* release all cgroup bpf data
* @work: work structure embedded into the cgroup to modify
*/
bpf: decouple the lifetime of cgroup_bpf from cgroup itself Currently the lifetime of bpf programs attached to a cgroup is bound to the lifetime of the cgroup itself. It means that if a user forgets (or intentionally avoids) to detach a bpf program before removing the cgroup, it will stay attached up to the release of the cgroup. Since the cgroup can stay in the dying state (the state between being rmdir()'ed and being released) for a very long time, it leads to a waste of memory. Also, it blocks a possibility to implement the memcg-based memory accounting for bpf objects, because a circular reference dependency will occur. Charged memory pages are pinning the corresponding memory cgroup, and if the memory cgroup is pinning the attached bpf program, nothing will be ever released. A dying cgroup can not contain any processes, so the only chance for an attached bpf program to be executed is a live socket associated with the cgroup. So in order to release all bpf data early, let's count associated sockets using a new percpu refcounter. On cgroup removal the counter is transitioned to the atomic mode, and as soon as it reaches 0, all bpf programs are detached. Because cgroup_bpf_release() can block, it can't be called from the percpu ref counter callback directly, so instead an asynchronous work is scheduled. The reference counter is not socket specific, and can be used for any other types of programs, which can be executed from a cgroup-bpf hook outside of the process context, had such a need arise in the future. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: jolsa@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-26 00:37:39 +08:00
static void cgroup_bpf_release(struct work_struct *work)
{
bpf: cgroup: prevent out-of-order release of cgroup bpf Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") cgroup bpf structures were released with corresponding cgroup structures. It guaranteed the hierarchical order of destruction: children were always first. It preserved attached programs from being released before their propagated copies. But with cgroup auto-detachment there are no such guarantees anymore: cgroup bpf is released as soon as the cgroup is offline and there are no live associated sockets. It means that an attached program can be detached and released, while its propagated copy is still living in the cgroup subtree. This will obviously lead to an use-after-free bug. To reproduce the issue the following script can be used: #!/bin/bash CGROOT=/sys/fs/cgroup mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C sleep 1 ./test_cgrp2_attach ${CGROOT}/A egress & A_PID=$! ./test_cgrp2_attach ${CGROOT}/B egress & B_PID=$! echo $$ > ${CGROOT}/A/C/cgroup.procs iperf -s & S_PID=$! iperf -c localhost -t 100 & C_PID=$! sleep 1 echo $$ > ${CGROOT}/B/cgroup.procs echo ${S_PID} > ${CGROOT}/B/cgroup.procs echo ${C_PID} > ${CGROOT}/B/cgroup.procs sleep 1 rmdir ${CGROOT}/A/C rmdir ${CGROOT}/A sleep 1 kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID} On the unpatched kernel the following stacktrace can be obtained: [ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002 [ 33.620677] #PF: supervisor read access in kernel mode [ 33.621293] #PF: error_code(0x0000) - not-present page [ 33.622754] Oops: 0000 [#1] SMP NOPTI [ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23 [ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0 [ 33.635809] Call Trace: [ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0 [ 33.636728] ? __switch_to_asm+0x40/0x70 [ 33.637196] ip_finish_output+0x68/0xa0 [ 33.637654] ip_output+0x76/0xf0 [ 33.638046] ? __ip_finish_output+0x1c0/0x1c0 [ 33.638576] __ip_queue_xmit+0x157/0x410 [ 33.639049] __tcp_transmit_skb+0x535/0xaf0 [ 33.639557] tcp_write_xmit+0x378/0x1190 [ 33.640049] ? _copy_from_iter_full+0x8d/0x260 [ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0 [ 33.641098] ? sock_has_perm+0x10/0xa0 [ 33.641574] tcp_sendmsg+0x28/0x40 [ 33.641985] sock_sendmsg+0x57/0x60 [ 33.642411] sock_write_iter+0x97/0x100 [ 33.642876] new_sync_write+0x1b6/0x1d0 [ 33.643339] vfs_write+0xb6/0x1a0 [ 33.643752] ksys_write+0xa7/0xe0 [ 33.644156] do_syscall_64+0x5b/0x1b0 [ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by grabbing a reference to the bpf structure of each ancestor on the initialization of the cgroup bpf structure, and dropping the reference at the end of releasing the cgroup bpf structure. This will restore the hierarchical order of cgroup bpf releasing, without adding any operations on hot paths. Thanks to Josef Bacik for the debugging and the initial analysis of the problem. Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-12-28 05:50:34 +08:00
struct cgroup *p, *cgrp = container_of(work, struct cgroup,
bpf.release_work);
struct bpf_prog_array *old_array;
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
struct list_head *storages = &cgrp->bpf.storages;
struct bpf_cgroup_storage *storage, *stmp;
unsigned int atype;
mutex_lock(&cgroup_mutex);
for (atype = 0; atype < ARRAY_SIZE(cgrp->bpf.progs); atype++) {
struct list_head *progs = &cgrp->bpf.progs[atype];
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
struct bpf_prog_list *pl, *pltmp;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
list_for_each_entry_safe(pl, pltmp, progs, node) {
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
list_del(&pl->node);
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (pl->prog)
bpf_prog_put(pl->prog);
if (pl->link)
bpf_cgroup_link_auto_detach(pl->link);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
kfree(pl);
static_branch_dec(&cgroup_bpf_enabled_key[atype]);
}
old_array = rcu_dereference_protected(
cgrp->bpf.effective[atype],
lockdep_is_held(&cgroup_mutex));
bpf_prog_array_free(old_array);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
}
bpf: decouple the lifetime of cgroup_bpf from cgroup itself Currently the lifetime of bpf programs attached to a cgroup is bound to the lifetime of the cgroup itself. It means that if a user forgets (or intentionally avoids) to detach a bpf program before removing the cgroup, it will stay attached up to the release of the cgroup. Since the cgroup can stay in the dying state (the state between being rmdir()'ed and being released) for a very long time, it leads to a waste of memory. Also, it blocks a possibility to implement the memcg-based memory accounting for bpf objects, because a circular reference dependency will occur. Charged memory pages are pinning the corresponding memory cgroup, and if the memory cgroup is pinning the attached bpf program, nothing will be ever released. A dying cgroup can not contain any processes, so the only chance for an attached bpf program to be executed is a live socket associated with the cgroup. So in order to release all bpf data early, let's count associated sockets using a new percpu refcounter. On cgroup removal the counter is transitioned to the atomic mode, and as soon as it reaches 0, all bpf programs are detached. Because cgroup_bpf_release() can block, it can't be called from the percpu ref counter callback directly, so instead an asynchronous work is scheduled. The reference counter is not socket specific, and can be used for any other types of programs, which can be executed from a cgroup-bpf hook outside of the process context, had such a need arise in the future. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: jolsa@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-26 00:37:39 +08:00
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
list_for_each_entry_safe(storage, stmp, storages, list_cg) {
bpf_cgroup_storage_unlink(storage);
bpf_cgroup_storage_free(storage);
}
mutex_unlock(&cgroup_mutex);
bpf: cgroup: prevent out-of-order release of cgroup bpf Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") cgroup bpf structures were released with corresponding cgroup structures. It guaranteed the hierarchical order of destruction: children were always first. It preserved attached programs from being released before their propagated copies. But with cgroup auto-detachment there are no such guarantees anymore: cgroup bpf is released as soon as the cgroup is offline and there are no live associated sockets. It means that an attached program can be detached and released, while its propagated copy is still living in the cgroup subtree. This will obviously lead to an use-after-free bug. To reproduce the issue the following script can be used: #!/bin/bash CGROOT=/sys/fs/cgroup mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C sleep 1 ./test_cgrp2_attach ${CGROOT}/A egress & A_PID=$! ./test_cgrp2_attach ${CGROOT}/B egress & B_PID=$! echo $$ > ${CGROOT}/A/C/cgroup.procs iperf -s & S_PID=$! iperf -c localhost -t 100 & C_PID=$! sleep 1 echo $$ > ${CGROOT}/B/cgroup.procs echo ${S_PID} > ${CGROOT}/B/cgroup.procs echo ${C_PID} > ${CGROOT}/B/cgroup.procs sleep 1 rmdir ${CGROOT}/A/C rmdir ${CGROOT}/A sleep 1 kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID} On the unpatched kernel the following stacktrace can be obtained: [ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002 [ 33.620677] #PF: supervisor read access in kernel mode [ 33.621293] #PF: error_code(0x0000) - not-present page [ 33.622754] Oops: 0000 [#1] SMP NOPTI [ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23 [ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0 [ 33.635809] Call Trace: [ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0 [ 33.636728] ? __switch_to_asm+0x40/0x70 [ 33.637196] ip_finish_output+0x68/0xa0 [ 33.637654] ip_output+0x76/0xf0 [ 33.638046] ? __ip_finish_output+0x1c0/0x1c0 [ 33.638576] __ip_queue_xmit+0x157/0x410 [ 33.639049] __tcp_transmit_skb+0x535/0xaf0 [ 33.639557] tcp_write_xmit+0x378/0x1190 [ 33.640049] ? _copy_from_iter_full+0x8d/0x260 [ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0 [ 33.641098] ? sock_has_perm+0x10/0xa0 [ 33.641574] tcp_sendmsg+0x28/0x40 [ 33.641985] sock_sendmsg+0x57/0x60 [ 33.642411] sock_write_iter+0x97/0x100 [ 33.642876] new_sync_write+0x1b6/0x1d0 [ 33.643339] vfs_write+0xb6/0x1a0 [ 33.643752] ksys_write+0xa7/0xe0 [ 33.644156] do_syscall_64+0x5b/0x1b0 [ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by grabbing a reference to the bpf structure of each ancestor on the initialization of the cgroup bpf structure, and dropping the reference at the end of releasing the cgroup bpf structure. This will restore the hierarchical order of cgroup bpf releasing, without adding any operations on hot paths. Thanks to Josef Bacik for the debugging and the initial analysis of the problem. Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-12-28 05:50:34 +08:00
for (p = cgroup_parent(cgrp); p; p = cgroup_parent(p))
cgroup_bpf_put(p);
bpf: decouple the lifetime of cgroup_bpf from cgroup itself Currently the lifetime of bpf programs attached to a cgroup is bound to the lifetime of the cgroup itself. It means that if a user forgets (or intentionally avoids) to detach a bpf program before removing the cgroup, it will stay attached up to the release of the cgroup. Since the cgroup can stay in the dying state (the state between being rmdir()'ed and being released) for a very long time, it leads to a waste of memory. Also, it blocks a possibility to implement the memcg-based memory accounting for bpf objects, because a circular reference dependency will occur. Charged memory pages are pinning the corresponding memory cgroup, and if the memory cgroup is pinning the attached bpf program, nothing will be ever released. A dying cgroup can not contain any processes, so the only chance for an attached bpf program to be executed is a live socket associated with the cgroup. So in order to release all bpf data early, let's count associated sockets using a new percpu refcounter. On cgroup removal the counter is transitioned to the atomic mode, and as soon as it reaches 0, all bpf programs are detached. Because cgroup_bpf_release() can block, it can't be called from the percpu ref counter callback directly, so instead an asynchronous work is scheduled. The reference counter is not socket specific, and can be used for any other types of programs, which can be executed from a cgroup-bpf hook outside of the process context, had such a need arise in the future. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: jolsa@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-26 00:37:39 +08:00
percpu_ref_exit(&cgrp->bpf.refcnt);
cgroup_put(cgrp);
}
/**
* cgroup_bpf_release_fn() - callback used to schedule releasing
* of bpf cgroup data
* @ref: percpu ref counter structure
*/
static void cgroup_bpf_release_fn(struct percpu_ref *ref)
{
struct cgroup *cgrp = container_of(ref, struct cgroup, bpf.refcnt);
INIT_WORK(&cgrp->bpf.release_work, cgroup_bpf_release);
queue_work(system_wq, &cgrp->bpf.release_work);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
}
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
/* Get underlying bpf_prog of bpf_prog_list entry, regardless if it's through
* link or direct prog.
*/
static struct bpf_prog *prog_list_prog(struct bpf_prog_list *pl)
{
if (pl->prog)
return pl->prog;
if (pl->link)
return pl->link->link.prog;
return NULL;
}
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
/* count number of elements in the list.
* it's slow but the list cannot be long
*/
static u32 prog_list_length(struct list_head *head)
{
struct bpf_prog_list *pl;
u32 cnt = 0;
list_for_each_entry(pl, head, node) {
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (!prog_list_prog(pl))
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
continue;
cnt++;
}
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
return cnt;
}
/* if parent has non-overridable prog attached,
* disallow attaching new programs to the descendent cgroup.
* if parent has overridable or multi-prog, allow attaching
*/
static bool hierarchy_allows_attach(struct cgroup *cgrp,
enum cgroup_bpf_attach_type atype)
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
{
struct cgroup *p;
p = cgroup_parent(cgrp);
if (!p)
return true;
do {
u32 flags = p->bpf.flags[atype];
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
u32 cnt;
if (flags & BPF_F_ALLOW_MULTI)
return true;
cnt = prog_list_length(&p->bpf.progs[atype]);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
WARN_ON_ONCE(cnt > 1);
if (cnt == 1)
return !!(flags & BPF_F_ALLOW_OVERRIDE);
p = cgroup_parent(p);
} while (p);
return true;
}
/* compute a chain of effective programs for a given cgroup:
* start from the list of programs in this cgroup and add
* all parent programs.
* Note that parent's F_ALLOW_OVERRIDE-type program is yielding
* to programs in this cgroup
*/
static int compute_effective_progs(struct cgroup *cgrp,
enum cgroup_bpf_attach_type atype,
struct bpf_prog_array **array)
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
{
struct bpf_prog_array_item *item;
struct bpf_prog_array *progs;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
struct bpf_prog_list *pl;
struct cgroup *p = cgrp;
int cnt = 0;
/* count number of effective programs by walking parents */
do {
if (cnt == 0 || (p->bpf.flags[atype] & BPF_F_ALLOW_MULTI))
cnt += prog_list_length(&p->bpf.progs[atype]);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
p = cgroup_parent(p);
} while (p);
progs = bpf_prog_array_alloc(cnt, GFP_KERNEL);
if (!progs)
return -ENOMEM;
/* populate the array with effective progs */
cnt = 0;
p = cgrp;
do {
if (cnt > 0 && !(p->bpf.flags[atype] & BPF_F_ALLOW_MULTI))
continue;
list_for_each_entry(pl, &p->bpf.progs[atype], node) {
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (!prog_list_prog(pl))
continue;
item = &progs->items[cnt];
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
item->prog = prog_list_prog(pl);
bpf_cgroup_storages_assign(item->cgroup_storage,
pl->storage);
cnt++;
}
} while ((p = cgroup_parent(p)));
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
*array = progs;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
return 0;
}
static void activate_effective_progs(struct cgroup *cgrp,
enum cgroup_bpf_attach_type atype,
struct bpf_prog_array *old_array)
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
{
old_array = rcu_replace_pointer(cgrp->bpf.effective[atype], old_array,
lockdep_is_held(&cgroup_mutex));
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
/* free prog array after grace period, since __cgroup_bpf_run_*()
* might be still walking the array
*/
bpf_prog_array_free(old_array);
}
/**
* cgroup_bpf_inherit() - inherit effective programs from parent
* @cgrp: the cgroup to modify
*/
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
int cgroup_bpf_inherit(struct cgroup *cgrp)
{
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
/* has to use marco instead of const int, since compiler thinks
* that array below is variable length
*/
#define NR ARRAY_SIZE(cgrp->bpf.effective)
struct bpf_prog_array *arrays[NR] = {};
bpf: cgroup: prevent out-of-order release of cgroup bpf Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") cgroup bpf structures were released with corresponding cgroup structures. It guaranteed the hierarchical order of destruction: children were always first. It preserved attached programs from being released before their propagated copies. But with cgroup auto-detachment there are no such guarantees anymore: cgroup bpf is released as soon as the cgroup is offline and there are no live associated sockets. It means that an attached program can be detached and released, while its propagated copy is still living in the cgroup subtree. This will obviously lead to an use-after-free bug. To reproduce the issue the following script can be used: #!/bin/bash CGROOT=/sys/fs/cgroup mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C sleep 1 ./test_cgrp2_attach ${CGROOT}/A egress & A_PID=$! ./test_cgrp2_attach ${CGROOT}/B egress & B_PID=$! echo $$ > ${CGROOT}/A/C/cgroup.procs iperf -s & S_PID=$! iperf -c localhost -t 100 & C_PID=$! sleep 1 echo $$ > ${CGROOT}/B/cgroup.procs echo ${S_PID} > ${CGROOT}/B/cgroup.procs echo ${C_PID} > ${CGROOT}/B/cgroup.procs sleep 1 rmdir ${CGROOT}/A/C rmdir ${CGROOT}/A sleep 1 kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID} On the unpatched kernel the following stacktrace can be obtained: [ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002 [ 33.620677] #PF: supervisor read access in kernel mode [ 33.621293] #PF: error_code(0x0000) - not-present page [ 33.622754] Oops: 0000 [#1] SMP NOPTI [ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23 [ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0 [ 33.635809] Call Trace: [ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0 [ 33.636728] ? __switch_to_asm+0x40/0x70 [ 33.637196] ip_finish_output+0x68/0xa0 [ 33.637654] ip_output+0x76/0xf0 [ 33.638046] ? __ip_finish_output+0x1c0/0x1c0 [ 33.638576] __ip_queue_xmit+0x157/0x410 [ 33.639049] __tcp_transmit_skb+0x535/0xaf0 [ 33.639557] tcp_write_xmit+0x378/0x1190 [ 33.640049] ? _copy_from_iter_full+0x8d/0x260 [ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0 [ 33.641098] ? sock_has_perm+0x10/0xa0 [ 33.641574] tcp_sendmsg+0x28/0x40 [ 33.641985] sock_sendmsg+0x57/0x60 [ 33.642411] sock_write_iter+0x97/0x100 [ 33.642876] new_sync_write+0x1b6/0x1d0 [ 33.643339] vfs_write+0xb6/0x1a0 [ 33.643752] ksys_write+0xa7/0xe0 [ 33.644156] do_syscall_64+0x5b/0x1b0 [ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by grabbing a reference to the bpf structure of each ancestor on the initialization of the cgroup bpf structure, and dropping the reference at the end of releasing the cgroup bpf structure. This will restore the hierarchical order of cgroup bpf releasing, without adding any operations on hot paths. Thanks to Josef Bacik for the debugging and the initial analysis of the problem. Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-12-28 05:50:34 +08:00
struct cgroup *p;
bpf: decouple the lifetime of cgroup_bpf from cgroup itself Currently the lifetime of bpf programs attached to a cgroup is bound to the lifetime of the cgroup itself. It means that if a user forgets (or intentionally avoids) to detach a bpf program before removing the cgroup, it will stay attached up to the release of the cgroup. Since the cgroup can stay in the dying state (the state between being rmdir()'ed and being released) for a very long time, it leads to a waste of memory. Also, it blocks a possibility to implement the memcg-based memory accounting for bpf objects, because a circular reference dependency will occur. Charged memory pages are pinning the corresponding memory cgroup, and if the memory cgroup is pinning the attached bpf program, nothing will be ever released. A dying cgroup can not contain any processes, so the only chance for an attached bpf program to be executed is a live socket associated with the cgroup. So in order to release all bpf data early, let's count associated sockets using a new percpu refcounter. On cgroup removal the counter is transitioned to the atomic mode, and as soon as it reaches 0, all bpf programs are detached. Because cgroup_bpf_release() can block, it can't be called from the percpu ref counter callback directly, so instead an asynchronous work is scheduled. The reference counter is not socket specific, and can be used for any other types of programs, which can be executed from a cgroup-bpf hook outside of the process context, had such a need arise in the future. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: jolsa@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-26 00:37:39 +08:00
int ret, i;
ret = percpu_ref_init(&cgrp->bpf.refcnt, cgroup_bpf_release_fn, 0,
GFP_KERNEL);
if (ret)
return ret;
bpf: cgroup: prevent out-of-order release of cgroup bpf Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") cgroup bpf structures were released with corresponding cgroup structures. It guaranteed the hierarchical order of destruction: children were always first. It preserved attached programs from being released before their propagated copies. But with cgroup auto-detachment there are no such guarantees anymore: cgroup bpf is released as soon as the cgroup is offline and there are no live associated sockets. It means that an attached program can be detached and released, while its propagated copy is still living in the cgroup subtree. This will obviously lead to an use-after-free bug. To reproduce the issue the following script can be used: #!/bin/bash CGROOT=/sys/fs/cgroup mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C sleep 1 ./test_cgrp2_attach ${CGROOT}/A egress & A_PID=$! ./test_cgrp2_attach ${CGROOT}/B egress & B_PID=$! echo $$ > ${CGROOT}/A/C/cgroup.procs iperf -s & S_PID=$! iperf -c localhost -t 100 & C_PID=$! sleep 1 echo $$ > ${CGROOT}/B/cgroup.procs echo ${S_PID} > ${CGROOT}/B/cgroup.procs echo ${C_PID} > ${CGROOT}/B/cgroup.procs sleep 1 rmdir ${CGROOT}/A/C rmdir ${CGROOT}/A sleep 1 kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID} On the unpatched kernel the following stacktrace can be obtained: [ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002 [ 33.620677] #PF: supervisor read access in kernel mode [ 33.621293] #PF: error_code(0x0000) - not-present page [ 33.622754] Oops: 0000 [#1] SMP NOPTI [ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23 [ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0 [ 33.635809] Call Trace: [ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0 [ 33.636728] ? __switch_to_asm+0x40/0x70 [ 33.637196] ip_finish_output+0x68/0xa0 [ 33.637654] ip_output+0x76/0xf0 [ 33.638046] ? __ip_finish_output+0x1c0/0x1c0 [ 33.638576] __ip_queue_xmit+0x157/0x410 [ 33.639049] __tcp_transmit_skb+0x535/0xaf0 [ 33.639557] tcp_write_xmit+0x378/0x1190 [ 33.640049] ? _copy_from_iter_full+0x8d/0x260 [ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0 [ 33.641098] ? sock_has_perm+0x10/0xa0 [ 33.641574] tcp_sendmsg+0x28/0x40 [ 33.641985] sock_sendmsg+0x57/0x60 [ 33.642411] sock_write_iter+0x97/0x100 [ 33.642876] new_sync_write+0x1b6/0x1d0 [ 33.643339] vfs_write+0xb6/0x1a0 [ 33.643752] ksys_write+0xa7/0xe0 [ 33.644156] do_syscall_64+0x5b/0x1b0 [ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by grabbing a reference to the bpf structure of each ancestor on the initialization of the cgroup bpf structure, and dropping the reference at the end of releasing the cgroup bpf structure. This will restore the hierarchical order of cgroup bpf releasing, without adding any operations on hot paths. Thanks to Josef Bacik for the debugging and the initial analysis of the problem. Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-12-28 05:50:34 +08:00
for (p = cgroup_parent(cgrp); p; p = cgroup_parent(p))
cgroup_bpf_get(p);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
for (i = 0; i < NR; i++)
INIT_LIST_HEAD(&cgrp->bpf.progs[i]);
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
INIT_LIST_HEAD(&cgrp->bpf.storages);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
for (i = 0; i < NR; i++)
if (compute_effective_progs(cgrp, i, &arrays[i]))
goto cleanup;
for (i = 0; i < NR; i++)
activate_effective_progs(cgrp, i, arrays[i]);
return 0;
cleanup:
for (i = 0; i < NR; i++)
bpf_prog_array_free(arrays[i]);
bpf: decouple the lifetime of cgroup_bpf from cgroup itself Currently the lifetime of bpf programs attached to a cgroup is bound to the lifetime of the cgroup itself. It means that if a user forgets (or intentionally avoids) to detach a bpf program before removing the cgroup, it will stay attached up to the release of the cgroup. Since the cgroup can stay in the dying state (the state between being rmdir()'ed and being released) for a very long time, it leads to a waste of memory. Also, it blocks a possibility to implement the memcg-based memory accounting for bpf objects, because a circular reference dependency will occur. Charged memory pages are pinning the corresponding memory cgroup, and if the memory cgroup is pinning the attached bpf program, nothing will be ever released. A dying cgroup can not contain any processes, so the only chance for an attached bpf program to be executed is a live socket associated with the cgroup. So in order to release all bpf data early, let's count associated sockets using a new percpu refcounter. On cgroup removal the counter is transitioned to the atomic mode, and as soon as it reaches 0, all bpf programs are detached. Because cgroup_bpf_release() can block, it can't be called from the percpu ref counter callback directly, so instead an asynchronous work is scheduled. The reference counter is not socket specific, and can be used for any other types of programs, which can be executed from a cgroup-bpf hook outside of the process context, had such a need arise in the future. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: jolsa@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-26 00:37:39 +08:00
for (p = cgroup_parent(cgrp); p; p = cgroup_parent(p))
cgroup_bpf_put(p);
bpf: decouple the lifetime of cgroup_bpf from cgroup itself Currently the lifetime of bpf programs attached to a cgroup is bound to the lifetime of the cgroup itself. It means that if a user forgets (or intentionally avoids) to detach a bpf program before removing the cgroup, it will stay attached up to the release of the cgroup. Since the cgroup can stay in the dying state (the state between being rmdir()'ed and being released) for a very long time, it leads to a waste of memory. Also, it blocks a possibility to implement the memcg-based memory accounting for bpf objects, because a circular reference dependency will occur. Charged memory pages are pinning the corresponding memory cgroup, and if the memory cgroup is pinning the attached bpf program, nothing will be ever released. A dying cgroup can not contain any processes, so the only chance for an attached bpf program to be executed is a live socket associated with the cgroup. So in order to release all bpf data early, let's count associated sockets using a new percpu refcounter. On cgroup removal the counter is transitioned to the atomic mode, and as soon as it reaches 0, all bpf programs are detached. Because cgroup_bpf_release() can block, it can't be called from the percpu ref counter callback directly, so instead an asynchronous work is scheduled. The reference counter is not socket specific, and can be used for any other types of programs, which can be executed from a cgroup-bpf hook outside of the process context, had such a need arise in the future. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: jolsa@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-26 00:37:39 +08:00
percpu_ref_exit(&cgrp->bpf.refcnt);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
return -ENOMEM;
}
static int update_effective_progs(struct cgroup *cgrp,
enum cgroup_bpf_attach_type atype)
{
struct cgroup_subsys_state *css;
int err;
/* allocate and recompute effective prog arrays */
css_for_each_descendant_pre(css, &cgrp->self) {
struct cgroup *desc = container_of(css, struct cgroup, self);
if (percpu_ref_is_zero(&desc->bpf.refcnt))
continue;
err = compute_effective_progs(desc, atype, &desc->bpf.inactive);
if (err)
goto cleanup;
}
/* all allocations were successful. Activate all prog arrays */
css_for_each_descendant_pre(css, &cgrp->self) {
struct cgroup *desc = container_of(css, struct cgroup, self);
if (percpu_ref_is_zero(&desc->bpf.refcnt)) {
if (unlikely(desc->bpf.inactive)) {
bpf_prog_array_free(desc->bpf.inactive);
desc->bpf.inactive = NULL;
}
continue;
}
activate_effective_progs(desc, atype, desc->bpf.inactive);
desc->bpf.inactive = NULL;
}
return 0;
cleanup:
/* oom while computing effective. Free all computed effective arrays
* since they were not activated
*/
css_for_each_descendant_pre(css, &cgrp->self) {
struct cgroup *desc = container_of(css, struct cgroup, self);
bpf_prog_array_free(desc->bpf.inactive);
desc->bpf.inactive = NULL;
}
return err;
}
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
#define BPF_CGROUP_MAX_PROGS 64
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
static struct bpf_prog_list *find_attach_entry(struct list_head *progs,
struct bpf_prog *prog,
struct bpf_cgroup_link *link,
struct bpf_prog *replace_prog,
bool allow_multi)
{
struct bpf_prog_list *pl;
/* single-attach case */
if (!allow_multi) {
if (list_empty(progs))
return NULL;
return list_first_entry(progs, typeof(*pl), node);
}
list_for_each_entry(pl, progs, node) {
if (prog && pl->prog == prog && prog != replace_prog)
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
/* disallow attaching the same prog twice */
return ERR_PTR(-EINVAL);
if (link && pl->link == link)
/* disallow attaching the same link twice */
return ERR_PTR(-EINVAL);
}
/* direct prog multi-attach w/ replacement case */
if (replace_prog) {
list_for_each_entry(pl, progs, node) {
if (pl->prog == replace_prog)
/* a match found */
return pl;
}
/* prog to replace not found for cgroup */
return ERR_PTR(-ENOENT);
}
return NULL;
}
/**
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
* __cgroup_bpf_attach() - Attach the program or the link to a cgroup, and
* propagate the change to descendants
* @cgrp: The cgroup which descendants to traverse
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
* @prog: A program to attach
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
* @link: A link to attach
bpf: Support replacing cgroup-bpf program in MULTI mode The common use-case in production is to have multiple cgroup-bpf programs per attach type that cover multiple use-cases. Such programs are attached with BPF_F_ALLOW_MULTI and can be maintained by different people. Order of programs usually matters, for example imagine two egress programs: the first one drops packets and the second one counts packets. If they're swapped the result of counting program will be different. It brings operational challenges with updating cgroup-bpf program(s) attached with BPF_F_ALLOW_MULTI since there is no way to replace a program: * One way to update is to detach all programs first and then attach the new version(s) again in the right order. This introduces an interruption in the work a program is doing and may not be acceptable (e.g. if it's egress firewall); * Another way is attach the new version of a program first and only then detach the old version. This introduces the time interval when two versions of same program are working, what may not be acceptable if a program is not idempotent. It also imposes additional burden on program developers to make sure that two versions of their program can co-exist. Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to replace That way user can replace any program among those attached with BPF_F_ALLOW_MULTI flag without the problems described above. Details of the new API: * If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid descriptor of BPF program, BPF_PROG_ATTACH will return corresponding error (EINVAL or EBADF). * If replace_bpf_fd has valid descriptor of BPF program but such a program is not attached to specified cgroup, BPF_PROG_ATTACH will return ENOENT. BPF_F_REPLACE is introduced to make the user intent clear, since replace_bpf_fd alone can't be used for this (its default value, 0, is a valid fd). BPF_F_REPLACE also makes it possible to extend the API in the future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed). Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Narkyiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
2019-12-19 15:44:35 +08:00
* @replace_prog: Previously attached program to replace if BPF_F_REPLACE is set
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
* @type: Type of attach operation
* @flags: Option flags
*
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
* Exactly one of @prog or @link can be non-null.
* Must be called with cgroup_mutex held.
*/
static int __cgroup_bpf_attach(struct cgroup *cgrp,
struct bpf_prog *prog, struct bpf_prog *replace_prog,
struct bpf_cgroup_link *link,
enum bpf_attach_type type, u32 flags)
{
bpf: Support replacing cgroup-bpf program in MULTI mode The common use-case in production is to have multiple cgroup-bpf programs per attach type that cover multiple use-cases. Such programs are attached with BPF_F_ALLOW_MULTI and can be maintained by different people. Order of programs usually matters, for example imagine two egress programs: the first one drops packets and the second one counts packets. If they're swapped the result of counting program will be different. It brings operational challenges with updating cgroup-bpf program(s) attached with BPF_F_ALLOW_MULTI since there is no way to replace a program: * One way to update is to detach all programs first and then attach the new version(s) again in the right order. This introduces an interruption in the work a program is doing and may not be acceptable (e.g. if it's egress firewall); * Another way is attach the new version of a program first and only then detach the old version. This introduces the time interval when two versions of same program are working, what may not be acceptable if a program is not idempotent. It also imposes additional burden on program developers to make sure that two versions of their program can co-exist. Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to replace That way user can replace any program among those attached with BPF_F_ALLOW_MULTI flag without the problems described above. Details of the new API: * If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid descriptor of BPF program, BPF_PROG_ATTACH will return corresponding error (EINVAL or EBADF). * If replace_bpf_fd has valid descriptor of BPF program but such a program is not attached to specified cgroup, BPF_PROG_ATTACH will return ENOENT. BPF_F_REPLACE is introduced to make the user intent clear, since replace_bpf_fd alone can't be used for this (its default value, 0, is a valid fd). BPF_F_REPLACE also makes it possible to extend the API in the future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed). Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Narkyiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
2019-12-19 15:44:35 +08:00
u32 saved_flags = (flags & (BPF_F_ALLOW_OVERRIDE | BPF_F_ALLOW_MULTI));
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
struct bpf_prog *old_prog = NULL;
struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE] = {};
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
struct bpf_cgroup_storage *new_storage[MAX_BPF_CGROUP_STORAGE_TYPE] = {};
enum cgroup_bpf_attach_type atype;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
struct bpf_prog_list *pl;
struct list_head *progs;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
int err;
bpf: Support replacing cgroup-bpf program in MULTI mode The common use-case in production is to have multiple cgroup-bpf programs per attach type that cover multiple use-cases. Such programs are attached with BPF_F_ALLOW_MULTI and can be maintained by different people. Order of programs usually matters, for example imagine two egress programs: the first one drops packets and the second one counts packets. If they're swapped the result of counting program will be different. It brings operational challenges with updating cgroup-bpf program(s) attached with BPF_F_ALLOW_MULTI since there is no way to replace a program: * One way to update is to detach all programs first and then attach the new version(s) again in the right order. This introduces an interruption in the work a program is doing and may not be acceptable (e.g. if it's egress firewall); * Another way is attach the new version of a program first and only then detach the old version. This introduces the time interval when two versions of same program are working, what may not be acceptable if a program is not idempotent. It also imposes additional burden on program developers to make sure that two versions of their program can co-exist. Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to replace That way user can replace any program among those attached with BPF_F_ALLOW_MULTI flag without the problems described above. Details of the new API: * If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid descriptor of BPF program, BPF_PROG_ATTACH will return corresponding error (EINVAL or EBADF). * If replace_bpf_fd has valid descriptor of BPF program but such a program is not attached to specified cgroup, BPF_PROG_ATTACH will return ENOENT. BPF_F_REPLACE is introduced to make the user intent clear, since replace_bpf_fd alone can't be used for this (its default value, 0, is a valid fd). BPF_F_REPLACE also makes it possible to extend the API in the future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed). Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Narkyiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
2019-12-19 15:44:35 +08:00
if (((flags & BPF_F_ALLOW_OVERRIDE) && (flags & BPF_F_ALLOW_MULTI)) ||
((flags & BPF_F_REPLACE) && !(flags & BPF_F_ALLOW_MULTI)))
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
/* invalid combination */
return -EINVAL;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (link && (prog || replace_prog))
/* only either link or prog/replace_prog can be specified */
return -EINVAL;
if (!!replace_prog != !!(flags & BPF_F_REPLACE))
/* replace_prog implies BPF_F_REPLACE, and vice versa */
return -EINVAL;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
atype = to_cgroup_bpf_attach_type(type);
if (atype < 0)
return -EINVAL;
progs = &cgrp->bpf.progs[atype];
if (!hierarchy_allows_attach(cgrp, atype))
return -EPERM;
if (!list_empty(progs) && cgrp->bpf.flags[atype] != saved_flags)
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
/* Disallow attaching non-overridable on top
* of existing overridable in this cgroup.
* Disallow attaching multi-prog if overridable or none
*/
return -EPERM;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
if (prog_list_length(progs) >= BPF_CGROUP_MAX_PROGS)
return -E2BIG;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
pl = find_attach_entry(progs, prog, link, replace_prog,
flags & BPF_F_ALLOW_MULTI);
if (IS_ERR(pl))
return PTR_ERR(pl);
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
if (bpf_cgroup_storages_alloc(storage, new_storage, type,
prog ? : link->link.prog, cgrp))
return -ENOMEM;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (pl) {
old_prog = pl->prog;
} else {
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
pl = kmalloc(sizeof(*pl), GFP_KERNEL);
if (!pl) {
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
bpf_cgroup_storages_free(new_storage);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
return -ENOMEM;
}
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
list_add_tail(&pl->node, progs);
}
pl->prog = prog;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
pl->link = link;
bpf_cgroup_storages_assign(pl->storage, storage);
cgrp->bpf.flags[atype] = saved_flags;
err = update_effective_progs(cgrp, atype);
if (err)
goto cleanup;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (old_prog)
bpf_prog_put(old_prog);
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
else
static_branch_inc(&cgroup_bpf_enabled_key[atype]);
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
bpf_cgroup_storages_link(new_storage, cgrp, type);
return 0;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
cleanup:
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (old_prog) {
pl->prog = old_prog;
pl->link = NULL;
}
bpf: Make cgroup storages shared between programs on the same cgroup This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com
2020-07-24 12:47:43 +08:00
bpf_cgroup_storages_free(new_storage);
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (!old_prog) {
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
list_del(&pl->node);
kfree(pl);
}
return err;
}
static int cgroup_bpf_attach(struct cgroup *cgrp,
struct bpf_prog *prog, struct bpf_prog *replace_prog,
struct bpf_cgroup_link *link,
enum bpf_attach_type type,
u32 flags)
{
int ret;
mutex_lock(&cgroup_mutex);
ret = __cgroup_bpf_attach(cgrp, prog, replace_prog, link, type, flags);
mutex_unlock(&cgroup_mutex);
return ret;
}
/* Swap updated BPF program for given link in effective program arrays across
* all descendant cgroups. This function is guaranteed to succeed.
*/
static void replace_effective_prog(struct cgroup *cgrp,
enum cgroup_bpf_attach_type atype,
struct bpf_cgroup_link *link)
{
struct bpf_prog_array_item *item;
struct cgroup_subsys_state *css;
struct bpf_prog_array *progs;
struct bpf_prog_list *pl;
struct list_head *head;
struct cgroup *cg;
int pos;
css_for_each_descendant_pre(css, &cgrp->self) {
struct cgroup *desc = container_of(css, struct cgroup, self);
if (percpu_ref_is_zero(&desc->bpf.refcnt))
continue;
/* find position of link in effective progs array */
for (pos = 0, cg = desc; cg; cg = cgroup_parent(cg)) {
if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))
continue;
head = &cg->bpf.progs[atype];
list_for_each_entry(pl, head, node) {
if (!prog_list_prog(pl))
continue;
if (pl->link == link)
goto found;
pos++;
}
}
found:
BUG_ON(!cg);
progs = rcu_dereference_protected(
desc->bpf.effective[atype],
lockdep_is_held(&cgroup_mutex));
item = &progs->items[pos];
WRITE_ONCE(item->prog, link->link.prog);
}
}
/**
* __cgroup_bpf_replace() - Replace link's program and propagate the change
* to descendants
* @cgrp: The cgroup which descendants to traverse
* @link: A link for which to replace BPF program
* @type: Type of attach operation
*
* Must be called with cgroup_mutex held.
*/
static int __cgroup_bpf_replace(struct cgroup *cgrp,
struct bpf_cgroup_link *link,
struct bpf_prog *new_prog)
{
enum cgroup_bpf_attach_type atype;
struct bpf_prog *old_prog;
struct bpf_prog_list *pl;
struct list_head *progs;
bool found = false;
atype = to_cgroup_bpf_attach_type(link->type);
if (atype < 0)
return -EINVAL;
progs = &cgrp->bpf.progs[atype];
if (link->link.prog->type != new_prog->type)
return -EINVAL;
list_for_each_entry(pl, progs, node) {
if (pl->link == link) {
found = true;
break;
}
}
if (!found)
return -ENOENT;
old_prog = xchg(&link->link.prog, new_prog);
replace_effective_prog(cgrp, atype, link);
bpf_prog_put(old_prog);
return 0;
}
static int cgroup_bpf_replace(struct bpf_link *link, struct bpf_prog *new_prog,
struct bpf_prog *old_prog)
{
struct bpf_cgroup_link *cg_link;
int ret;
cg_link = container_of(link, struct bpf_cgroup_link, link);
mutex_lock(&cgroup_mutex);
/* link might have been auto-released by dying cgroup, so fail */
if (!cg_link->cgroup) {
ret = -ENOLINK;
goto out_unlock;
}
if (old_prog && link->prog != old_prog) {
ret = -EPERM;
goto out_unlock;
}
ret = __cgroup_bpf_replace(cg_link->cgroup, cg_link, new_prog);
out_unlock:
mutex_unlock(&cgroup_mutex);
return ret;
}
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
static struct bpf_prog_list *find_detach_entry(struct list_head *progs,
struct bpf_prog *prog,
struct bpf_cgroup_link *link,
bool allow_multi)
{
struct bpf_prog_list *pl;
if (!allow_multi) {
if (list_empty(progs))
/* report error when trying to detach and nothing is attached */
return ERR_PTR(-ENOENT);
/* to maintain backward compatibility NONE and OVERRIDE cgroups
* allow detaching with invalid FD (prog==NULL) in legacy mode
*/
return list_first_entry(progs, typeof(*pl), node);
}
if (!prog && !link)
/* to detach MULTI prog the user has to specify valid FD
* of the program or link to be detached
*/
return ERR_PTR(-EINVAL);
/* find the prog or link and detach it */
list_for_each_entry(pl, progs, node) {
if (pl->prog == prog && pl->link == link)
return pl;
}
return ERR_PTR(-ENOENT);
}
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
/**
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
* __cgroup_bpf_detach() - Detach the program or link from a cgroup, and
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
* propagate the change to descendants
* @cgrp: The cgroup which descendants to traverse
* @prog: A program to detach or NULL
* @link: A link to detach or NULL
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
* @type: Type of detach operation
*
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
* At most one of @prog or @link can be non-NULL.
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
* Must be called with cgroup_mutex held.
*/
static int __cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,
struct bpf_cgroup_link *link, enum bpf_attach_type type)
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
{
enum cgroup_bpf_attach_type atype;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
struct bpf_prog *old_prog;
struct bpf_prog_list *pl;
struct list_head *progs;
u32 flags;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
int err;
atype = to_cgroup_bpf_attach_type(type);
if (atype < 0)
return -EINVAL;
progs = &cgrp->bpf.progs[atype];
flags = cgrp->bpf.flags[atype];
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (prog && link)
/* only one of prog or link can be specified */
return -EINVAL;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
pl = find_detach_entry(progs, prog, link, flags & BPF_F_ALLOW_MULTI);
if (IS_ERR(pl))
return PTR_ERR(pl);
/* mark it deleted, so it's ignored while recomputing effective */
old_prog = pl->prog;
pl->prog = NULL;
pl->link = NULL;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
err = update_effective_progs(cgrp, atype);
if (err)
goto cleanup;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
/* now can actually delete it from this cgroup list */
list_del(&pl->node);
kfree(pl);
if (list_empty(progs))
/* last program was detached, reset flags to zero */
cgrp->bpf.flags[atype] = 0;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (old_prog)
bpf_prog_put(old_prog);
static_branch_dec(&cgroup_bpf_enabled_key[atype]);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
return 0;
cleanup:
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
/* restore back prog or link */
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
pl->prog = old_prog;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
pl->link = link;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
return err;
}
static int cgroup_bpf_detach(struct cgroup *cgrp, struct bpf_prog *prog,
enum bpf_attach_type type)
{
int ret;
mutex_lock(&cgroup_mutex);
ret = __cgroup_bpf_detach(cgrp, prog, NULL, type);
mutex_unlock(&cgroup_mutex);
return ret;
}
/* Must be called with cgroup_mutex held to avoid races. */
static int __cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr,
union bpf_attr __user *uattr)
{
__u32 __user *prog_ids = u64_to_user_ptr(attr->query.prog_ids);
enum bpf_attach_type type = attr->query.attach_type;
enum cgroup_bpf_attach_type atype;
struct bpf_prog_array *effective;
struct list_head *progs;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
struct bpf_prog *prog;
int cnt, ret = 0, i;
u32 flags;
atype = to_cgroup_bpf_attach_type(type);
if (atype < 0)
return -EINVAL;
progs = &cgrp->bpf.progs[atype];
flags = cgrp->bpf.flags[atype];
effective = rcu_dereference_protected(cgrp->bpf.effective[atype],
lockdep_is_held(&cgroup_mutex));
if (attr->query.query_flags & BPF_F_QUERY_EFFECTIVE)
cnt = bpf_prog_array_length(effective);
else
cnt = prog_list_length(progs);
if (copy_to_user(&uattr->query.attach_flags, &flags, sizeof(flags)))
return -EFAULT;
if (copy_to_user(&uattr->query.prog_cnt, &cnt, sizeof(cnt)))
return -EFAULT;
if (attr->query.prog_cnt == 0 || !prog_ids || !cnt)
/* return early if user requested only program count + flags */
return 0;
if (attr->query.prog_cnt < cnt) {
cnt = attr->query.prog_cnt;
ret = -ENOSPC;
}
if (attr->query.query_flags & BPF_F_QUERY_EFFECTIVE) {
return bpf_prog_array_copy_to_user(effective, prog_ids, cnt);
} else {
struct bpf_prog_list *pl;
u32 id;
i = 0;
list_for_each_entry(pl, progs, node) {
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
prog = prog_list_prog(pl);
id = prog->aux->id;
if (copy_to_user(prog_ids + i, &id, sizeof(id)))
return -EFAULT;
if (++i == cnt)
break;
}
}
return ret;
}
static int cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr,
union bpf_attr __user *uattr)
{
int ret;
mutex_lock(&cgroup_mutex);
ret = __cgroup_bpf_query(cgrp, attr, uattr);
mutex_unlock(&cgroup_mutex);
return ret;
}
int cgroup_bpf_prog_attach(const union bpf_attr *attr,
enum bpf_prog_type ptype, struct bpf_prog *prog)
{
bpf: Support replacing cgroup-bpf program in MULTI mode The common use-case in production is to have multiple cgroup-bpf programs per attach type that cover multiple use-cases. Such programs are attached with BPF_F_ALLOW_MULTI and can be maintained by different people. Order of programs usually matters, for example imagine two egress programs: the first one drops packets and the second one counts packets. If they're swapped the result of counting program will be different. It brings operational challenges with updating cgroup-bpf program(s) attached with BPF_F_ALLOW_MULTI since there is no way to replace a program: * One way to update is to detach all programs first and then attach the new version(s) again in the right order. This introduces an interruption in the work a program is doing and may not be acceptable (e.g. if it's egress firewall); * Another way is attach the new version of a program first and only then detach the old version. This introduces the time interval when two versions of same program are working, what may not be acceptable if a program is not idempotent. It also imposes additional burden on program developers to make sure that two versions of their program can co-exist. Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to replace That way user can replace any program among those attached with BPF_F_ALLOW_MULTI flag without the problems described above. Details of the new API: * If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid descriptor of BPF program, BPF_PROG_ATTACH will return corresponding error (EINVAL or EBADF). * If replace_bpf_fd has valid descriptor of BPF program but such a program is not attached to specified cgroup, BPF_PROG_ATTACH will return ENOENT. BPF_F_REPLACE is introduced to make the user intent clear, since replace_bpf_fd alone can't be used for this (its default value, 0, is a valid fd). BPF_F_REPLACE also makes it possible to extend the API in the future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed). Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Narkyiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
2019-12-19 15:44:35 +08:00
struct bpf_prog *replace_prog = NULL;
struct cgroup *cgrp;
int ret;
cgrp = cgroup_get_from_fd(attr->target_fd);
if (IS_ERR(cgrp))
return PTR_ERR(cgrp);
bpf: Support replacing cgroup-bpf program in MULTI mode The common use-case in production is to have multiple cgroup-bpf programs per attach type that cover multiple use-cases. Such programs are attached with BPF_F_ALLOW_MULTI and can be maintained by different people. Order of programs usually matters, for example imagine two egress programs: the first one drops packets and the second one counts packets. If they're swapped the result of counting program will be different. It brings operational challenges with updating cgroup-bpf program(s) attached with BPF_F_ALLOW_MULTI since there is no way to replace a program: * One way to update is to detach all programs first and then attach the new version(s) again in the right order. This introduces an interruption in the work a program is doing and may not be acceptable (e.g. if it's egress firewall); * Another way is attach the new version of a program first and only then detach the old version. This introduces the time interval when two versions of same program are working, what may not be acceptable if a program is not idempotent. It also imposes additional burden on program developers to make sure that two versions of their program can co-exist. Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to replace That way user can replace any program among those attached with BPF_F_ALLOW_MULTI flag without the problems described above. Details of the new API: * If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid descriptor of BPF program, BPF_PROG_ATTACH will return corresponding error (EINVAL or EBADF). * If replace_bpf_fd has valid descriptor of BPF program but such a program is not attached to specified cgroup, BPF_PROG_ATTACH will return ENOENT. BPF_F_REPLACE is introduced to make the user intent clear, since replace_bpf_fd alone can't be used for this (its default value, 0, is a valid fd). BPF_F_REPLACE also makes it possible to extend the API in the future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed). Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Narkyiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
2019-12-19 15:44:35 +08:00
if ((attr->attach_flags & BPF_F_ALLOW_MULTI) &&
(attr->attach_flags & BPF_F_REPLACE)) {
replace_prog = bpf_prog_get_type(attr->replace_bpf_fd, ptype);
if (IS_ERR(replace_prog)) {
cgroup_put(cgrp);
return PTR_ERR(replace_prog);
}
}
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
ret = cgroup_bpf_attach(cgrp, prog, replace_prog, NULL,
attr->attach_type, attr->attach_flags);
bpf: Support replacing cgroup-bpf program in MULTI mode The common use-case in production is to have multiple cgroup-bpf programs per attach type that cover multiple use-cases. Such programs are attached with BPF_F_ALLOW_MULTI and can be maintained by different people. Order of programs usually matters, for example imagine two egress programs: the first one drops packets and the second one counts packets. If they're swapped the result of counting program will be different. It brings operational challenges with updating cgroup-bpf program(s) attached with BPF_F_ALLOW_MULTI since there is no way to replace a program: * One way to update is to detach all programs first and then attach the new version(s) again in the right order. This introduces an interruption in the work a program is doing and may not be acceptable (e.g. if it's egress firewall); * Another way is attach the new version of a program first and only then detach the old version. This introduces the time interval when two versions of same program are working, what may not be acceptable if a program is not idempotent. It also imposes additional burden on program developers to make sure that two versions of their program can co-exist. Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to replace That way user can replace any program among those attached with BPF_F_ALLOW_MULTI flag without the problems described above. Details of the new API: * If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid descriptor of BPF program, BPF_PROG_ATTACH will return corresponding error (EINVAL or EBADF). * If replace_bpf_fd has valid descriptor of BPF program but such a program is not attached to specified cgroup, BPF_PROG_ATTACH will return ENOENT. BPF_F_REPLACE is introduced to make the user intent clear, since replace_bpf_fd alone can't be used for this (its default value, 0, is a valid fd). BPF_F_REPLACE also makes it possible to extend the API in the future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed). Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Narkyiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
2019-12-19 15:44:35 +08:00
if (replace_prog)
bpf_prog_put(replace_prog);
cgroup_put(cgrp);
return ret;
}
int cgroup_bpf_prog_detach(const union bpf_attr *attr, enum bpf_prog_type ptype)
{
struct bpf_prog *prog;
struct cgroup *cgrp;
int ret;
cgrp = cgroup_get_from_fd(attr->target_fd);
if (IS_ERR(cgrp))
return PTR_ERR(cgrp);
prog = bpf_prog_get_type(attr->attach_bpf_fd, ptype);
if (IS_ERR(prog))
prog = NULL;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
ret = cgroup_bpf_detach(cgrp, prog, attr->attach_type);
if (prog)
bpf_prog_put(prog);
cgroup_put(cgrp);
return ret;
}
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
static void bpf_cgroup_link_release(struct bpf_link *link)
{
struct bpf_cgroup_link *cg_link =
container_of(link, struct bpf_cgroup_link, link);
struct cgroup *cg;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
/* link might have been auto-detached by dying cgroup already,
* in that case our work is done here
*/
if (!cg_link->cgroup)
return;
mutex_lock(&cgroup_mutex);
/* re-check cgroup under lock again */
if (!cg_link->cgroup) {
mutex_unlock(&cgroup_mutex);
return;
}
WARN_ON(__cgroup_bpf_detach(cg_link->cgroup, NULL, cg_link,
cg_link->type));
cg = cg_link->cgroup;
cg_link->cgroup = NULL;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
mutex_unlock(&cgroup_mutex);
cgroup_put(cg);
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
}
static void bpf_cgroup_link_dealloc(struct bpf_link *link)
{
struct bpf_cgroup_link *cg_link =
container_of(link, struct bpf_cgroup_link, link);
kfree(cg_link);
}
static int bpf_cgroup_link_detach(struct bpf_link *link)
{
bpf_cgroup_link_release(link);
return 0;
}
static void bpf_cgroup_link_show_fdinfo(const struct bpf_link *link,
struct seq_file *seq)
{
struct bpf_cgroup_link *cg_link =
container_of(link, struct bpf_cgroup_link, link);
u64 cg_id = 0;
mutex_lock(&cgroup_mutex);
if (cg_link->cgroup)
cg_id = cgroup_id(cg_link->cgroup);
mutex_unlock(&cgroup_mutex);
seq_printf(seq,
"cgroup_id:\t%llu\n"
"attach_type:\t%d\n",
cg_id,
cg_link->type);
}
static int bpf_cgroup_link_fill_link_info(const struct bpf_link *link,
struct bpf_link_info *info)
{
struct bpf_cgroup_link *cg_link =
container_of(link, struct bpf_cgroup_link, link);
u64 cg_id = 0;
mutex_lock(&cgroup_mutex);
if (cg_link->cgroup)
cg_id = cgroup_id(cg_link->cgroup);
mutex_unlock(&cgroup_mutex);
info->cgroup.cgroup_id = cg_id;
info->cgroup.attach_type = cg_link->type;
return 0;
}
static const struct bpf_link_ops bpf_cgroup_link_lops = {
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
.release = bpf_cgroup_link_release,
.dealloc = bpf_cgroup_link_dealloc,
.detach = bpf_cgroup_link_detach,
.update_prog = cgroup_bpf_replace,
.show_fdinfo = bpf_cgroup_link_show_fdinfo,
.fill_link_info = bpf_cgroup_link_fill_link_info,
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
};
int cgroup_bpf_link_attach(const union bpf_attr *attr, struct bpf_prog *prog)
{
struct bpf_link_primer link_primer;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
struct bpf_cgroup_link *link;
struct cgroup *cgrp;
int err;
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (attr->link_create.flags)
return -EINVAL;
cgrp = cgroup_get_from_fd(attr->link_create.target_fd);
if (IS_ERR(cgrp))
return PTR_ERR(cgrp);
link = kzalloc(sizeof(*link), GFP_USER);
if (!link) {
err = -ENOMEM;
goto out_put_cgroup;
}
bpf_link_init(&link->link, BPF_LINK_TYPE_CGROUP, &bpf_cgroup_link_lops,
prog);
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
link->cgroup = cgrp;
link->type = attr->link_create.attach_type;
err = bpf_link_prime(&link->link, &link_primer);
if (err) {
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
kfree(link);
goto out_put_cgroup;
}
err = cgroup_bpf_attach(cgrp, NULL, NULL, link,
link->type, BPF_F_ALLOW_MULTI);
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
if (err) {
bpf_link_cleanup(&link_primer);
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
goto out_put_cgroup;
}
return bpf_link_settle(&link_primer);
bpf: Implement bpf_link-based cgroup BPF program attachment Implement new sub-command to attach cgroup BPF programs and return FD-based bpf_link back on success. bpf_link, once attached to cgroup, cannot be replaced, except by owner having its FD. Cgroup bpf_link supports only BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI attachments can be freely intermixed. To prevent bpf_cgroup_link from keeping cgroup alive past the point when no BPF program can be executed, implement auto-detachment of link. When cgroup_bpf_release() is called, all attached bpf_links are forced to release cgroup refcounts, but they leave bpf_link otherwise active and allocated, as well as still owning underlying bpf_prog. This is because user-space might still have FDs open and active, so bpf_link as a user-referenced object can't be freed yet. Once last active FD is closed, bpf_link will be freed and underlying bpf_prog refcount will be dropped. But cgroup refcount won't be touched, because cgroup is released already. The inherent race between bpf_cgroup_link release (from closing last FD) and cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So the only additional check required is when bpf_cgroup_link attempts to detach itself from cgroup. At that time we need to check whether there is still cgroup associated with that link. And if not, exit with success, because bpf_cgroup_link was already successfully detached. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
2020-03-30 10:59:58 +08:00
out_put_cgroup:
cgroup_put(cgrp);
return err;
}
int cgroup_bpf_prog_query(const union bpf_attr *attr,
union bpf_attr __user *uattr)
{
struct cgroup *cgrp;
int ret;
cgrp = cgroup_get_from_fd(attr->query.target_fd);
if (IS_ERR(cgrp))
return PTR_ERR(cgrp);
ret = cgroup_bpf_query(cgrp, attr, uattr);
cgroup_put(cgrp);
return ret;
}
/**
* __cgroup_bpf_run_filter_skb() - Run a program for packet filtering
* @sk: The socket sending or receiving traffic
* @skb: The skb that is being sent or received
* @type: The type of program to be executed
*
* If no socket is passed, or the socket is not of type INET or INET6,
* this function does nothing and returns 0.
*
* The program type passed in via @type must be suitable for network
* filtering. No further check is performed to assert that.
*
* For egress packets, this function can return:
* NET_XMIT_SUCCESS (0) - continue with packet output
* NET_XMIT_DROP (1) - drop packet and notify TCP to call cwr
* NET_XMIT_CN (2) - continue with packet output and notify TCP
* to call cwr
* -err - drop packet
*
* For ingress packets, this function will return -EPERM if any
* attached program was found and if it returned != 1 during execution.
* Otherwise 0 is returned.
*/
int __cgroup_bpf_run_filter_skb(struct sock *sk,
struct sk_buff *skb,
enum cgroup_bpf_attach_type atype)
{
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
unsigned int offset = skb->data - skb_network_header(skb);
struct sock *save_sk;
void *saved_data_end;
struct cgroup *cgrp;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
int ret;
if (!sk || !sk_fullsock(sk))
return 0;
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
if (sk->sk_family != AF_INET && sk->sk_family != AF_INET6)
return 0;
cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
save_sk = skb->sk;
skb->sk = sk;
__skb_push(skb, offset);
/* compute pointers for the bpf prog */
bpf_compute_and_save_data_end(skb, &saved_data_end);
if (atype == CGROUP_INET_EGRESS) {
u32 flags = 0;
bool cn;
ret = bpf_prog_run_array_cg(&cgrp->bpf, atype, skb,
__bpf_prog_run_save_cb, 0, &flags);
/* Return values of CGROUP EGRESS BPF programs are:
* 0: drop packet
* 1: keep packet
* 2: drop packet and cn
* 3: keep packet and cn
*
* The returned value is then converted to one of the NET_XMIT
* or an error code that is then interpreted as drop packet
* (and no cn):
* 0: NET_XMIT_SUCCESS skb should be transmitted
* 1: NET_XMIT_DROP skb should be dropped and cn
* 2: NET_XMIT_CN skb should be transmitted and cn
* 3: -err skb should be dropped
*/
cn = flags & BPF_RET_SET_CN;
if (ret && !IS_ERR_VALUE((long)ret))
ret = -EFAULT;
if (!ret)
ret = (cn ? NET_XMIT_CN : NET_XMIT_SUCCESS);
else
ret = (cn ? NET_XMIT_DROP : ret);
} else {
ret = bpf_prog_run_array_cg(&cgrp->bpf, atype,
skb, __bpf_prog_run_save_cb, 0,
NULL);
if (ret && !IS_ERR_VALUE((long)ret))
ret = -EFAULT;
}
bpf_restore_data_end(skb, saved_data_end);
bpf: multi program support for cgroup+bpf introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 13:50:21 +08:00
__skb_pull(skb, offset);
skb->sk = save_sk;
return ret;
}
EXPORT_SYMBOL(__cgroup_bpf_run_filter_skb);
/**
* __cgroup_bpf_run_filter_sk() - Run a program on a sock
* @sk: sock structure to manipulate
* @type: The type of program to be executed
*
* socket is passed is expected to be of type INET or INET6.
*
* The program type passed in via @type must be suitable for sock
* filtering. No further check is performed to assert that.
*
* This function will return %-EPERM if any if an attached program was found
* and if it returned != 1 during execution. In all other cases, 0 is returned.
*/
int __cgroup_bpf_run_filter_sk(struct sock *sk,
enum cgroup_bpf_attach_type atype)
{
struct cgroup *cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
return bpf_prog_run_array_cg(&cgrp->bpf, atype, sk, bpf_prog_run, 0,
NULL);
}
EXPORT_SYMBOL(__cgroup_bpf_run_filter_sk);
bpf: BPF support for sock_ops Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding struct that allows BPF programs of this type to access some of the socket's fields (such as IP addresses, ports, etc.). It uses the existing bpf cgroups infrastructure so the programs can be attached per cgroup with full inheritance support. The program will be called at appropriate times to set relevant connections parameters such as buffer sizes, SYN and SYN-ACK RTOs, etc., based on connection information such as IP addresses, port numbers, etc. Alghough there are already 3 mechanisms to set parameters (sysctls, route metrics and setsockopts), this new mechanism provides some distinct advantages. Unlike sysctls, it can set parameters per connection. In contrast to route metrics, it can also use port numbers and information provided by a user level program. In addition, it could set parameters probabilistically for evaluation purposes (i.e. do something different on 10% of the flows and compare results with the other 90% of the flows). Also, in cases where IPv6 addresses contain geographic information, the rules to make changes based on the distance (or RTT) between the hosts are much easier than route metric rules and can be global. Finally, unlike setsockopt, it oes not require application changes and it can be updated easily at any time. Although the bpf cgroup framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called only once during the connections's lifetime. In contrast, the new program type will be called multiple times from different places in the network stack code. For example, before sending SYN and SYN-ACKs to set an appropriate timeout, when the connection is established to set congestion control, etc. As a result it has "op" field to specify the type of operation requested. The purpose of this new program type is to simplify setting connection parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is easy to use facebook's internal IPv6 addresses to determine if both hosts of a connection are in the same datacenter. Therefore, it is easy to write a BPF program to choose a small SYN RTO value when both hosts are in the same datacenter. This patch only contains the framework to support the new BPF program type, following patches add the functionality to set various connection parameters. This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS and a new bpf syscall command to load a new program of this type: BPF_PROG_LOAD_SOCKET_OPS. Two new corresponding structs (one for the kernel one for the user/BPF program): /* kernel version */ struct bpf_sock_ops_kern { struct sock *sk; __u32 op; union { __u32 reply; __u32 replylong[4]; }; }; /* user version * Some fields are in network byte order reflecting the sock struct * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to * convert them to host byte order. */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* In network byte order */ __u32 local_ip4; /* In network byte order */ __u32 remote_ip6[4]; /* In network byte order */ __u32 local_ip6[4]; /* In network byte order */ __u32 remote_port; /* In network byte order */ __u32 local_port; /* In host byte horder */ }; Currently there are two types of ops. The first type expects the BPF program to return a value which is then used by the caller (or a negative value to indicate the operation is not supported). The second type expects state changes to be done by the BPF program, for example through a setsockopt BPF helper function, and they ignore the return value. The reply fields of the bpf_sockt_ops struct are there in case a bpf program needs to return a value larger than an integer. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 11:02:40 +08:00
bpf: Hooks for sys_bind == The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:02 +08:00
/**
* __cgroup_bpf_run_filter_sock_addr() - Run a program on a sock and
* provided by user sockaddr
* @sk: sock struct that will use sockaddr
* @uaddr: sockaddr struct provided by user
* @type: The type of program to be executed
bpf: Hooks for sys_sendmsg In addition to already existing BPF hooks for sys_bind and sys_connect, the patch provides new hooks for sys_sendmsg. It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that provides access to socket itlself (properties like family, type, protocol) and user-passed `struct sockaddr *` so that BPF program can override destination IP and port for system calls such as sendto(2) or sendmsg(2) and/or assign source IP to the socket. The hooks are implemented as two new attach types: `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and UDPv6 correspondingly. UDPv4 and UDPv6 separate attach types for same reason as sys_bind and sys_connect hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. The difference with already existing hooks is sys_sendmsg are implemented only for unconnected UDP. For TCP it doesn't make sense to change user-provided `struct sockaddr *` at sendto(2)/sendmsg(2) time since socket either was already connected and has source/destination set or wasn't connected and call to sendto(2)/sendmsg(2) would lead to ENOTCONN anyway. Connected UDP is already handled by sys_connect hooks that can override source/destination at connect time and use fast-path later, i.e. these hooks don't affect UDP fast-path. Rewriting source IP is implemented differently than that in sys_connect hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to just bind socket to desired local IP address since source IP can be set on per-packet basis by using ancillary data (cmsg(3)). So no matter if socket is bound or not, source IP has to be rewritten on every call to sys_sendmsg. To do so two new fields are added to UAPI `struct bpf_sock_addr`; * `msg_src_ip4` to set source IPv4 for UDPv4; * `msg_src_ip6` to set source IPv6 for UDPv6. Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-25 23:55:23 +08:00
* @t_ctx: Pointer to attach type specific context
* @flags: Pointer to u32 which contains higher bits of BPF program
* return value (OR'ed together).
bpf: Hooks for sys_bind == The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:02 +08:00
*
* socket is expected to be of type INET or INET6.
*
* This function will return %-EPERM if an attached program is found and
* returned value != 1 during execution. In all other cases, 0 is returned.
*/
int __cgroup_bpf_run_filter_sock_addr(struct sock *sk,
struct sockaddr *uaddr,
enum cgroup_bpf_attach_type atype,
void *t_ctx,
u32 *flags)
bpf: Hooks for sys_bind == The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:02 +08:00
{
struct bpf_sock_addr_kern ctx = {
.sk = sk,
.uaddr = uaddr,
bpf: Hooks for sys_sendmsg In addition to already existing BPF hooks for sys_bind and sys_connect, the patch provides new hooks for sys_sendmsg. It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that provides access to socket itlself (properties like family, type, protocol) and user-passed `struct sockaddr *` so that BPF program can override destination IP and port for system calls such as sendto(2) or sendmsg(2) and/or assign source IP to the socket. The hooks are implemented as two new attach types: `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and UDPv6 correspondingly. UDPv4 and UDPv6 separate attach types for same reason as sys_bind and sys_connect hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. The difference with already existing hooks is sys_sendmsg are implemented only for unconnected UDP. For TCP it doesn't make sense to change user-provided `struct sockaddr *` at sendto(2)/sendmsg(2) time since socket either was already connected and has source/destination set or wasn't connected and call to sendto(2)/sendmsg(2) would lead to ENOTCONN anyway. Connected UDP is already handled by sys_connect hooks that can override source/destination at connect time and use fast-path later, i.e. these hooks don't affect UDP fast-path. Rewriting source IP is implemented differently than that in sys_connect hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to just bind socket to desired local IP address since source IP can be set on per-packet basis by using ancillary data (cmsg(3)). So no matter if socket is bound or not, source IP has to be rewritten on every call to sys_sendmsg. To do so two new fields are added to UAPI `struct bpf_sock_addr`; * `msg_src_ip4` to set source IPv4 for UDPv4; * `msg_src_ip6` to set source IPv6 for UDPv6. Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-25 23:55:23 +08:00
.t_ctx = t_ctx,
bpf: Hooks for sys_bind == The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:02 +08:00
};
bpf: Hooks for sys_sendmsg In addition to already existing BPF hooks for sys_bind and sys_connect, the patch provides new hooks for sys_sendmsg. It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that provides access to socket itlself (properties like family, type, protocol) and user-passed `struct sockaddr *` so that BPF program can override destination IP and port for system calls such as sendto(2) or sendmsg(2) and/or assign source IP to the socket. The hooks are implemented as two new attach types: `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and UDPv6 correspondingly. UDPv4 and UDPv6 separate attach types for same reason as sys_bind and sys_connect hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. The difference with already existing hooks is sys_sendmsg are implemented only for unconnected UDP. For TCP it doesn't make sense to change user-provided `struct sockaddr *` at sendto(2)/sendmsg(2) time since socket either was already connected and has source/destination set or wasn't connected and call to sendto(2)/sendmsg(2) would lead to ENOTCONN anyway. Connected UDP is already handled by sys_connect hooks that can override source/destination at connect time and use fast-path later, i.e. these hooks don't affect UDP fast-path. Rewriting source IP is implemented differently than that in sys_connect hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to just bind socket to desired local IP address since source IP can be set on per-packet basis by using ancillary data (cmsg(3)). So no matter if socket is bound or not, source IP has to be rewritten on every call to sys_sendmsg. To do so two new fields are added to UAPI `struct bpf_sock_addr`; * `msg_src_ip4` to set source IPv4 for UDPv4; * `msg_src_ip6` to set source IPv6 for UDPv6. Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-25 23:55:23 +08:00
struct sockaddr_storage unspec;
bpf: Hooks for sys_bind == The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:02 +08:00
struct cgroup *cgrp;
/* Check socket family since not all sockets represent network
* endpoint (e.g. AF_UNIX).
*/
if (sk->sk_family != AF_INET && sk->sk_family != AF_INET6)
return 0;
bpf: Hooks for sys_sendmsg In addition to already existing BPF hooks for sys_bind and sys_connect, the patch provides new hooks for sys_sendmsg. It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that provides access to socket itlself (properties like family, type, protocol) and user-passed `struct sockaddr *` so that BPF program can override destination IP and port for system calls such as sendto(2) or sendmsg(2) and/or assign source IP to the socket. The hooks are implemented as two new attach types: `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and UDPv6 correspondingly. UDPv4 and UDPv6 separate attach types for same reason as sys_bind and sys_connect hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. The difference with already existing hooks is sys_sendmsg are implemented only for unconnected UDP. For TCP it doesn't make sense to change user-provided `struct sockaddr *` at sendto(2)/sendmsg(2) time since socket either was already connected and has source/destination set or wasn't connected and call to sendto(2)/sendmsg(2) would lead to ENOTCONN anyway. Connected UDP is already handled by sys_connect hooks that can override source/destination at connect time and use fast-path later, i.e. these hooks don't affect UDP fast-path. Rewriting source IP is implemented differently than that in sys_connect hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to just bind socket to desired local IP address since source IP can be set on per-packet basis by using ancillary data (cmsg(3)). So no matter if socket is bound or not, source IP has to be rewritten on every call to sys_sendmsg. To do so two new fields are added to UAPI `struct bpf_sock_addr`; * `msg_src_ip4` to set source IPv4 for UDPv4; * `msg_src_ip6` to set source IPv6 for UDPv6. Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-25 23:55:23 +08:00
if (!ctx.uaddr) {
memset(&unspec, 0, sizeof(unspec));
ctx.uaddr = (struct sockaddr *)&unspec;
}
bpf: Hooks for sys_bind == The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:02 +08:00
cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
return bpf_prog_run_array_cg(&cgrp->bpf, atype, &ctx, bpf_prog_run,
0, flags);
bpf: Hooks for sys_bind == The problem == There is a use-case when all processes inside a cgroup should use one single IP address on a host that has multiple IP configured. Those processes should use the IP for both ingress and egress, for TCP and UDP traffic. So TCP/UDP servers should be bound to that IP to accept incoming connections on it, and TCP/UDP clients should make outgoing connections from that IP. It should not require changing application code since it's often not possible. Currently it's solved by intercepting glibc wrappers around syscalls such as `bind(2)` and `connect(2)`. It's done by a shared library that is preloaded for every process in a cgroup so that whenever TCP/UDP server calls `bind(2)`, the library replaces IP in sockaddr before passing arguments to syscall. When application calls `connect(2)` the library transparently binds the local end of connection to that IP (`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty). Shared library approach is fragile though, e.g.: * some applications clear env vars (incl. `LD_PRELOAD`); * `/etc/ld.so.preload` doesn't help since some applications are linked with option `-z nodefaultlib`; * other applications don't use glibc and there is nothing to intercept. == The solution == The patch provides much more reliable in-kernel solution for the 1st part of the problem: binding TCP/UDP servers on desired IP. It does not depend on application environment and implementation details (whether glibc is used or not). It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND` (similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`). The new program type is intended to be used with sockets (`struct sock`) in a cgroup and provided by user `struct sockaddr`. Pointers to both of them are parts of the context passed to programs of newly added types. The new attach types provides hooks in `bind(2)` system call for both IPv4 and IPv6 so that one can write a program to override IP addresses and ports user program tries to bind to and apply such a program for whole cgroup. == Implementation notes == [1] Separate attach types for `AF_INET` and `AF_INET6` are added intentionally to prevent reading/writing to offsets that don't make sense for corresponding socket family. E.g. if user passes `sockaddr_in` it doesn't make sense to read from / write to `user_ip6[]` context fields. [2] The write access to `struct bpf_sock_addr_kern` is implemented using special field as an additional "register". There are just two registers in `sock_addr_convert_ctx_access`: `src` with value to write and `dst` with pointer to context that can't be changed not to break later instructions. But the fields, allowed to write to, are not available directly and to access them address of corresponding pointer has to be loaded first. To get additional register the 1st not used by `src` and `dst` one is taken, its content is saved to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load address of pointer field, and finally the register's content is restored from the temporary field after writing `src` value. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:02 +08:00
}
EXPORT_SYMBOL(__cgroup_bpf_run_filter_sock_addr);
bpf: BPF support for sock_ops Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding struct that allows BPF programs of this type to access some of the socket's fields (such as IP addresses, ports, etc.). It uses the existing bpf cgroups infrastructure so the programs can be attached per cgroup with full inheritance support. The program will be called at appropriate times to set relevant connections parameters such as buffer sizes, SYN and SYN-ACK RTOs, etc., based on connection information such as IP addresses, port numbers, etc. Alghough there are already 3 mechanisms to set parameters (sysctls, route metrics and setsockopts), this new mechanism provides some distinct advantages. Unlike sysctls, it can set parameters per connection. In contrast to route metrics, it can also use port numbers and information provided by a user level program. In addition, it could set parameters probabilistically for evaluation purposes (i.e. do something different on 10% of the flows and compare results with the other 90% of the flows). Also, in cases where IPv6 addresses contain geographic information, the rules to make changes based on the distance (or RTT) between the hosts are much easier than route metric rules and can be global. Finally, unlike setsockopt, it oes not require application changes and it can be updated easily at any time. Although the bpf cgroup framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called only once during the connections's lifetime. In contrast, the new program type will be called multiple times from different places in the network stack code. For example, before sending SYN and SYN-ACKs to set an appropriate timeout, when the connection is established to set congestion control, etc. As a result it has "op" field to specify the type of operation requested. The purpose of this new program type is to simplify setting connection parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is easy to use facebook's internal IPv6 addresses to determine if both hosts of a connection are in the same datacenter. Therefore, it is easy to write a BPF program to choose a small SYN RTO value when both hosts are in the same datacenter. This patch only contains the framework to support the new BPF program type, following patches add the functionality to set various connection parameters. This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS and a new bpf syscall command to load a new program of this type: BPF_PROG_LOAD_SOCKET_OPS. Two new corresponding structs (one for the kernel one for the user/BPF program): /* kernel version */ struct bpf_sock_ops_kern { struct sock *sk; __u32 op; union { __u32 reply; __u32 replylong[4]; }; }; /* user version * Some fields are in network byte order reflecting the sock struct * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to * convert them to host byte order. */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* In network byte order */ __u32 local_ip4; /* In network byte order */ __u32 remote_ip6[4]; /* In network byte order */ __u32 local_ip6[4]; /* In network byte order */ __u32 remote_port; /* In network byte order */ __u32 local_port; /* In host byte horder */ }; Currently there are two types of ops. The first type expects the BPF program to return a value which is then used by the caller (or a negative value to indicate the operation is not supported). The second type expects state changes to be done by the BPF program, for example through a setsockopt BPF helper function, and they ignore the return value. The reply fields of the bpf_sockt_ops struct are there in case a bpf program needs to return a value larger than an integer. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 11:02:40 +08:00
/**
* __cgroup_bpf_run_filter_sock_ops() - Run a program on a sock
* @sk: socket to get cgroup from
* @sock_ops: bpf_sock_ops_kern struct to pass to program. Contains
* sk with connection information (IP addresses, etc.) May not contain
* cgroup info if it is a req sock.
* @type: The type of program to be executed
bpf: BPF support for sock_ops Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding struct that allows BPF programs of this type to access some of the socket's fields (such as IP addresses, ports, etc.). It uses the existing bpf cgroups infrastructure so the programs can be attached per cgroup with full inheritance support. The program will be called at appropriate times to set relevant connections parameters such as buffer sizes, SYN and SYN-ACK RTOs, etc., based on connection information such as IP addresses, port numbers, etc. Alghough there are already 3 mechanisms to set parameters (sysctls, route metrics and setsockopts), this new mechanism provides some distinct advantages. Unlike sysctls, it can set parameters per connection. In contrast to route metrics, it can also use port numbers and information provided by a user level program. In addition, it could set parameters probabilistically for evaluation purposes (i.e. do something different on 10% of the flows and compare results with the other 90% of the flows). Also, in cases where IPv6 addresses contain geographic information, the rules to make changes based on the distance (or RTT) between the hosts are much easier than route metric rules and can be global. Finally, unlike setsockopt, it oes not require application changes and it can be updated easily at any time. Although the bpf cgroup framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called only once during the connections's lifetime. In contrast, the new program type will be called multiple times from different places in the network stack code. For example, before sending SYN and SYN-ACKs to set an appropriate timeout, when the connection is established to set congestion control, etc. As a result it has "op" field to specify the type of operation requested. The purpose of this new program type is to simplify setting connection parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is easy to use facebook's internal IPv6 addresses to determine if both hosts of a connection are in the same datacenter. Therefore, it is easy to write a BPF program to choose a small SYN RTO value when both hosts are in the same datacenter. This patch only contains the framework to support the new BPF program type, following patches add the functionality to set various connection parameters. This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS and a new bpf syscall command to load a new program of this type: BPF_PROG_LOAD_SOCKET_OPS. Two new corresponding structs (one for the kernel one for the user/BPF program): /* kernel version */ struct bpf_sock_ops_kern { struct sock *sk; __u32 op; union { __u32 reply; __u32 replylong[4]; }; }; /* user version * Some fields are in network byte order reflecting the sock struct * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to * convert them to host byte order. */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* In network byte order */ __u32 local_ip4; /* In network byte order */ __u32 remote_ip6[4]; /* In network byte order */ __u32 local_ip6[4]; /* In network byte order */ __u32 remote_port; /* In network byte order */ __u32 local_port; /* In host byte horder */ }; Currently there are two types of ops. The first type expects the BPF program to return a value which is then used by the caller (or a negative value to indicate the operation is not supported). The second type expects state changes to be done by the BPF program, for example through a setsockopt BPF helper function, and they ignore the return value. The reply fields of the bpf_sockt_ops struct are there in case a bpf program needs to return a value larger than an integer. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 11:02:40 +08:00
*
* socket passed is expected to be of type INET or INET6.
*
* The program type passed in via @type must be suitable for sock_ops
* filtering. No further check is performed to assert that.
*
* This function will return %-EPERM if any if an attached program was found
* and if it returned != 1 during execution. In all other cases, 0 is returned.
*/
int __cgroup_bpf_run_filter_sock_ops(struct sock *sk,
struct bpf_sock_ops_kern *sock_ops,
enum cgroup_bpf_attach_type atype)
bpf: BPF support for sock_ops Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding struct that allows BPF programs of this type to access some of the socket's fields (such as IP addresses, ports, etc.). It uses the existing bpf cgroups infrastructure so the programs can be attached per cgroup with full inheritance support. The program will be called at appropriate times to set relevant connections parameters such as buffer sizes, SYN and SYN-ACK RTOs, etc., based on connection information such as IP addresses, port numbers, etc. Alghough there are already 3 mechanisms to set parameters (sysctls, route metrics and setsockopts), this new mechanism provides some distinct advantages. Unlike sysctls, it can set parameters per connection. In contrast to route metrics, it can also use port numbers and information provided by a user level program. In addition, it could set parameters probabilistically for evaluation purposes (i.e. do something different on 10% of the flows and compare results with the other 90% of the flows). Also, in cases where IPv6 addresses contain geographic information, the rules to make changes based on the distance (or RTT) between the hosts are much easier than route metric rules and can be global. Finally, unlike setsockopt, it oes not require application changes and it can be updated easily at any time. Although the bpf cgroup framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called only once during the connections's lifetime. In contrast, the new program type will be called multiple times from different places in the network stack code. For example, before sending SYN and SYN-ACKs to set an appropriate timeout, when the connection is established to set congestion control, etc. As a result it has "op" field to specify the type of operation requested. The purpose of this new program type is to simplify setting connection parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is easy to use facebook's internal IPv6 addresses to determine if both hosts of a connection are in the same datacenter. Therefore, it is easy to write a BPF program to choose a small SYN RTO value when both hosts are in the same datacenter. This patch only contains the framework to support the new BPF program type, following patches add the functionality to set various connection parameters. This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS and a new bpf syscall command to load a new program of this type: BPF_PROG_LOAD_SOCKET_OPS. Two new corresponding structs (one for the kernel one for the user/BPF program): /* kernel version */ struct bpf_sock_ops_kern { struct sock *sk; __u32 op; union { __u32 reply; __u32 replylong[4]; }; }; /* user version * Some fields are in network byte order reflecting the sock struct * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to * convert them to host byte order. */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* In network byte order */ __u32 local_ip4; /* In network byte order */ __u32 remote_ip6[4]; /* In network byte order */ __u32 local_ip6[4]; /* In network byte order */ __u32 remote_port; /* In network byte order */ __u32 local_port; /* In host byte horder */ }; Currently there are two types of ops. The first type expects the BPF program to return a value which is then used by the caller (or a negative value to indicate the operation is not supported). The second type expects state changes to be done by the BPF program, for example through a setsockopt BPF helper function, and they ignore the return value. The reply fields of the bpf_sockt_ops struct are there in case a bpf program needs to return a value larger than an integer. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 11:02:40 +08:00
{
struct cgroup *cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
return bpf_prog_run_array_cg(&cgrp->bpf, atype, sock_ops, bpf_prog_run,
0, NULL);
bpf: BPF support for sock_ops Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding struct that allows BPF programs of this type to access some of the socket's fields (such as IP addresses, ports, etc.). It uses the existing bpf cgroups infrastructure so the programs can be attached per cgroup with full inheritance support. The program will be called at appropriate times to set relevant connections parameters such as buffer sizes, SYN and SYN-ACK RTOs, etc., based on connection information such as IP addresses, port numbers, etc. Alghough there are already 3 mechanisms to set parameters (sysctls, route metrics and setsockopts), this new mechanism provides some distinct advantages. Unlike sysctls, it can set parameters per connection. In contrast to route metrics, it can also use port numbers and information provided by a user level program. In addition, it could set parameters probabilistically for evaluation purposes (i.e. do something different on 10% of the flows and compare results with the other 90% of the flows). Also, in cases where IPv6 addresses contain geographic information, the rules to make changes based on the distance (or RTT) between the hosts are much easier than route metric rules and can be global. Finally, unlike setsockopt, it oes not require application changes and it can be updated easily at any time. Although the bpf cgroup framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK), I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type expects to be called only once during the connections's lifetime. In contrast, the new program type will be called multiple times from different places in the network stack code. For example, before sending SYN and SYN-ACKs to set an appropriate timeout, when the connection is established to set congestion control, etc. As a result it has "op" field to specify the type of operation requested. The purpose of this new program type is to simplify setting connection parameters, such as buffer sizes, TCP's SYN RTO, etc. For example, it is easy to use facebook's internal IPv6 addresses to determine if both hosts of a connection are in the same datacenter. Therefore, it is easy to write a BPF program to choose a small SYN RTO value when both hosts are in the same datacenter. This patch only contains the framework to support the new BPF program type, following patches add the functionality to set various connection parameters. This patch defines a new BPF program type: BPF_PROG_TYPE_SOCKET_OPS and a new bpf syscall command to load a new program of this type: BPF_PROG_LOAD_SOCKET_OPS. Two new corresponding structs (one for the kernel one for the user/BPF program): /* kernel version */ struct bpf_sock_ops_kern { struct sock *sk; __u32 op; union { __u32 reply; __u32 replylong[4]; }; }; /* user version * Some fields are in network byte order reflecting the sock struct * Use the bpf_ntohl helper macro in samples/bpf/bpf_endian.h to * convert them to host byte order. */ struct bpf_sock_ops { __u32 op; union { __u32 reply; __u32 replylong[4]; }; __u32 family; __u32 remote_ip4; /* In network byte order */ __u32 local_ip4; /* In network byte order */ __u32 remote_ip6[4]; /* In network byte order */ __u32 local_ip6[4]; /* In network byte order */ __u32 remote_port; /* In network byte order */ __u32 local_port; /* In host byte horder */ }; Currently there are two types of ops. The first type expects the BPF program to return a value which is then used by the caller (or a negative value to indicate the operation is not supported). The second type expects state changes to be done by the BPF program, for example through a setsockopt BPF helper function, and they ignore the return value. The reply fields of the bpf_sockt_ops struct are there in case a bpf program needs to return a value larger than an integer. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 11:02:40 +08:00
}
EXPORT_SYMBOL(__cgroup_bpf_run_filter_sock_ops);
int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor,
short access, enum cgroup_bpf_attach_type atype)
{
struct cgroup *cgrp;
struct bpf_cgroup_dev_ctx ctx = {
.access_type = (access << 16) | dev_type,
.major = major,
.minor = minor,
};
int ret;
rcu_read_lock();
cgrp = task_dfl_cgroup(current);
ret = bpf_prog_run_array_cg(&cgrp->bpf, atype, &ctx, bpf_prog_run, 0,
NULL);
rcu_read_unlock();
return ret;
}
BPF_CALL_0(bpf_get_retval)
{
struct bpf_cg_run_ctx *ctx =
container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx);
return ctx->retval;
}
static const struct bpf_func_proto bpf_get_retval_proto = {
.func = bpf_get_retval,
.gpl_only = false,
.ret_type = RET_INTEGER,
};
BPF_CALL_1(bpf_set_retval, int, retval)
{
struct bpf_cg_run_ctx *ctx =
container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx);
ctx->retval = retval;
return 0;
}
static const struct bpf_func_proto bpf_set_retval_proto = {
.func = bpf_set_retval,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_ANYTHING,
};
static const struct bpf_func_proto *
cgroup_base_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
{
switch (func_id) {
case BPF_FUNC_get_current_uid_gid:
return &bpf_get_current_uid_gid_proto;
case BPF_FUNC_get_local_storage:
return &bpf_get_local_storage_proto;
case BPF_FUNC_get_current_cgroup_id:
return &bpf_get_current_cgroup_id_proto;
case BPF_FUNC_perf_event_output:
return &bpf_event_output_data_proto;
case BPF_FUNC_get_retval:
return &bpf_get_retval_proto;
case BPF_FUNC_set_retval:
return &bpf_set_retval_proto;
default:
return bpf_base_func_proto(func_id);
}
}
static const struct bpf_func_proto *
cgroup_dev_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
{
return cgroup_base_func_proto(func_id, prog);
}
static bool cgroup_dev_is_valid_access(int off, int size,
enum bpf_access_type type,
bpf: Check attach type at prog load time == The problem == There are use-cases when a program of some type can be attached to multiple attach points and those attach points must have different permissions to access context or to call helpers. E.g. context structure may have fields for both IPv4 and IPv6 but it doesn't make sense to read from / write to IPv6 field when attach point is somewhere in IPv4 stack. Same applies to BPF-helpers: it may make sense to call some helper from some attach point, but not from other for same prog type. == The solution == Introduce `expected_attach_type` field in in `struct bpf_attr` for `BPF_PROG_LOAD` command. If scenario described in "The problem" section is the case for some prog type, the field will be checked twice: 1) At load time prog type is checked to see if attach type for it must be known to validate program permissions correctly. Prog will be rejected with EINVAL if it's the case and `expected_attach_type` is not specified or has invalid value. 2) At attach time `attach_type` is compared with `expected_attach_type`, if prog type requires to have one, and, if they differ, attach will be rejected with EINVAL. The `expected_attach_type` is now available as part of `struct bpf_prog` in both `bpf_verifier_ops->is_valid_access()` and `bpf_verifier_ops->get_func_proto()` () and can be used to check context accesses and calls to helpers correspondingly. Initially the idea was discussed by Alexei Starovoitov <ast@fb.com> and Daniel Borkmann <daniel@iogearbox.net> here: https://marc.info/?l=linux-netdev&m=152107378717201&w=2 Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:00 +08:00
const struct bpf_prog *prog,
struct bpf_insn_access_aux *info)
{
const int size_default = sizeof(__u32);
if (type == BPF_WRITE)
return false;
if (off < 0 || off + size > sizeof(struct bpf_cgroup_dev_ctx))
return false;
/* The verifier guarantees that size > 0. */
if (off % size != 0)
return false;
switch (off) {
case bpf_ctx_range(struct bpf_cgroup_dev_ctx, access_type):
bpf_ctx_record_field_size(info, size_default);
if (!bpf_ctx_narrow_access_ok(off, size, size_default))
return false;
break;
default:
if (size != size_default)
return false;
}
return true;
}
const struct bpf_prog_ops cg_dev_prog_ops = {
};
const struct bpf_verifier_ops cg_dev_verifier_ops = {
.get_func_proto = cgroup_dev_func_proto,
.is_valid_access = cgroup_dev_is_valid_access,
};
/**
* __cgroup_bpf_run_filter_sysctl - Run a program on sysctl
*
* @head: sysctl table header
* @table: sysctl table
* @write: sysctl is being read (= 0) or written (= 1)
* @buf: pointer to buffer (in and out)
* @pcount: value-result argument: value is size of buffer pointed to by @buf,
* result is size of @new_buf if program set new value, initial value
* otherwise
* @ppos: value-result argument: value is position at which read from or write
* to sysctl is happening, result is new position if program overrode it,
* initial value otherwise
* @type: type of program to be executed
*
* Program is run when sysctl is being accessed, either read or written, and
* can allow or deny such access.
*
* This function will return %-EPERM if an attached program is found and
* returned value != 1 during execution. In all other cases 0 is returned.
*/
int __cgroup_bpf_run_filter_sysctl(struct ctl_table_header *head,
struct ctl_table *table, int write,
char **buf, size_t *pcount, loff_t *ppos,
enum cgroup_bpf_attach_type atype)
{
struct bpf_sysctl_kern ctx = {
.head = head,
.table = table,
.write = write,
.ppos = ppos,
.cur_val = NULL,
.cur_len = PAGE_SIZE,
.new_val = NULL,
.new_len = 0,
.new_updated = 0,
};
struct cgroup *cgrp;
loff_t pos = 0;
int ret;
ctx.cur_val = kmalloc_track_caller(ctx.cur_len, GFP_KERNEL);
if (!ctx.cur_val ||
table->proc_handler(table, 0, ctx.cur_val, &ctx.cur_len, &pos)) {
/* Let BPF program decide how to proceed. */
ctx.cur_len = 0;
}
if (write && *buf && *pcount) {
/* BPF program should be able to override new value with a
* buffer bigger than provided by user.
*/
ctx.new_val = kmalloc_track_caller(PAGE_SIZE, GFP_KERNEL);
ctx.new_len = min_t(size_t, PAGE_SIZE, *pcount);
if (ctx.new_val) {
memcpy(ctx.new_val, *buf, ctx.new_len);
} else {
/* Let BPF program decide how to proceed. */
ctx.new_len = 0;
}
}
rcu_read_lock();
cgrp = task_dfl_cgroup(current);
ret = bpf_prog_run_array_cg(&cgrp->bpf, atype, &ctx, bpf_prog_run, 0,
NULL);
rcu_read_unlock();
kfree(ctx.cur_val);
if (ret == 1 && ctx.new_updated) {
kfree(*buf);
*buf = ctx.new_val;
*pcount = ctx.new_len;
} else {
kfree(ctx.new_val);
}
return ret;
}
#ifdef CONFIG_NET
static int sockopt_alloc_buf(struct bpf_sockopt_kern *ctx, int max_optlen,
struct bpf_sockopt_buf *buf)
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
{
if (unlikely(max_optlen < 0))
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
return -EINVAL;
if (unlikely(max_optlen > PAGE_SIZE)) {
/* We don't expose optvals that are greater than PAGE_SIZE
* to the BPF program.
*/
max_optlen = PAGE_SIZE;
}
if (max_optlen <= sizeof(buf->data)) {
/* When the optval fits into BPF_SOCKOPT_KERN_BUF_SIZE
* bytes avoid the cost of kzalloc.
*/
ctx->optval = buf->data;
ctx->optval_end = ctx->optval + max_optlen;
return max_optlen;
}
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
ctx->optval = kzalloc(max_optlen, GFP_USER);
if (!ctx->optval)
return -ENOMEM;
ctx->optval_end = ctx->optval + max_optlen;
return max_optlen;
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
}
static void sockopt_free_buf(struct bpf_sockopt_kern *ctx,
struct bpf_sockopt_buf *buf)
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
{
if (ctx->optval == buf->data)
return;
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
kfree(ctx->optval);
}
static bool sockopt_buf_allocated(struct bpf_sockopt_kern *ctx,
struct bpf_sockopt_buf *buf)
{
return ctx->optval != buf->data;
}
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
int __cgroup_bpf_run_filter_setsockopt(struct sock *sk, int *level,
int *optname, char __user *optval,
int *optlen, char **kernel_optval)
{
struct cgroup *cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
struct bpf_sockopt_buf buf = {};
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
struct bpf_sockopt_kern ctx = {
.sk = sk,
.level = *level,
.optname = *optname,
};
int ret, max_optlen;
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
/* Allocate a bit more than the initial user buffer for
* BPF program. The canonical use case is overriding
* TCP_CONGESTION(nv) to TCP_CONGESTION(cubic).
*/
max_optlen = max_t(int, 16, *optlen);
max_optlen = sockopt_alloc_buf(&ctx, max_optlen, &buf);
if (max_optlen < 0)
return max_optlen;
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
ctx.optlen = *optlen;
if (copy_from_user(ctx.optval, optval, min(*optlen, max_optlen)) != 0) {
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
ret = -EFAULT;
goto out;
}
lock_sock(sk);
ret = bpf_prog_run_array_cg(&cgrp->bpf, CGROUP_SETSOCKOPT,
&ctx, bpf_prog_run, 0, NULL);
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
release_sock(sk);
if (ret)
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
goto out;
if (ctx.optlen == -1) {
/* optlen set to -1, bypass kernel */
ret = 1;
} else if (ctx.optlen > max_optlen || ctx.optlen < -1) {
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
/* optlen is out of bounds */
ret = -EFAULT;
} else {
/* optlen within bounds, run kernel handler */
ret = 0;
/* export any potential modifications */
*level = ctx.level;
*optname = ctx.optname;
/* optlen == 0 from BPF indicates that we should
* use original userspace data.
*/
if (ctx.optlen != 0) {
*optlen = ctx.optlen;
/* We've used bpf_sockopt_kern->buf as an intermediary
* storage, but the BPF program indicates that we need
* to pass this data to the kernel setsockopt handler.
* No way to export on-stack buf, have to allocate a
* new buffer.
*/
if (!sockopt_buf_allocated(&ctx, &buf)) {
void *p = kmalloc(ctx.optlen, GFP_USER);
if (!p) {
ret = -ENOMEM;
goto out;
}
memcpy(p, ctx.optval, ctx.optlen);
*kernel_optval = p;
} else {
*kernel_optval = ctx.optval;
}
/* export and don't free sockopt buf */
return 0;
}
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
}
out:
sockopt_free_buf(&ctx, &buf);
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
return ret;
}
int __cgroup_bpf_run_filter_getsockopt(struct sock *sk, int level,
int optname, char __user *optval,
int __user *optlen, int max_optlen,
int retval)
{
struct cgroup *cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
struct bpf_sockopt_buf buf = {};
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
struct bpf_sockopt_kern ctx = {
.sk = sk,
.level = level,
.optname = optname,
.current_task = current,
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
};
int ret;
ctx.optlen = max_optlen;
max_optlen = sockopt_alloc_buf(&ctx, max_optlen, &buf);
if (max_optlen < 0)
return max_optlen;
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
if (!retval) {
/* If kernel getsockopt finished successfully,
* copy whatever was returned to the user back
* into our temporary buffer. Set optlen to the
* one that kernel returned as well to let
* BPF programs inspect the value.
*/
if (get_user(ctx.optlen, optlen)) {
ret = -EFAULT;
goto out;
}
if (ctx.optlen < 0) {
ret = -EFAULT;
goto out;
}
if (copy_from_user(ctx.optval, optval,
min(ctx.optlen, max_optlen)) != 0) {
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
ret = -EFAULT;
goto out;
}
}
lock_sock(sk);
ret = bpf_prog_run_array_cg(&cgrp->bpf, CGROUP_GETSOCKOPT,
&ctx, bpf_prog_run, retval, NULL);
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
release_sock(sk);
if (ret < 0)
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
goto out;
if (ctx.optlen > max_optlen || ctx.optlen < 0) {
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
ret = -EFAULT;
goto out;
}
if (ctx.optlen != 0) {
if (copy_to_user(optval, ctx.optval, ctx.optlen) ||
put_user(ctx.optlen, optlen)) {
ret = -EFAULT;
goto out;
}
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
}
out:
sockopt_free_buf(&ctx, &buf);
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
return ret;
}
int __cgroup_bpf_run_filter_getsockopt_kern(struct sock *sk, int level,
int optname, void *optval,
int *optlen, int retval)
{
struct cgroup *cgrp = sock_cgroup_ptr(&sk->sk_cgrp_data);
struct bpf_sockopt_kern ctx = {
.sk = sk,
.level = level,
.optname = optname,
.optlen = *optlen,
.optval = optval,
.optval_end = optval + *optlen,
.current_task = current,
};
int ret;
/* Note that __cgroup_bpf_run_filter_getsockopt doesn't copy
* user data back into BPF buffer when reval != 0. This is
* done as an optimization to avoid extra copy, assuming
* kernel won't populate the data in case of an error.
* Here we always pass the data and memset() should
* be called if that data shouldn't be "exported".
*/
ret = bpf_prog_run_array_cg(&cgrp->bpf, CGROUP_GETSOCKOPT,
&ctx, bpf_prog_run, retval, NULL);
if (ret < 0)
return ret;
if (ctx.optlen > *optlen)
return -EFAULT;
/* BPF programs can shrink the buffer, export the modifications.
*/
if (ctx.optlen != 0)
*optlen = ctx.optlen;
return ret;
}
#endif
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
static ssize_t sysctl_cpy_dir(const struct ctl_dir *dir, char **bufp,
size_t *lenp)
{
ssize_t tmp_ret = 0, ret;
if (dir->header.parent) {
tmp_ret = sysctl_cpy_dir(dir->header.parent, bufp, lenp);
if (tmp_ret < 0)
return tmp_ret;
}
ret = strscpy(*bufp, dir->header.ctl_table[0].procname, *lenp);
if (ret < 0)
return ret;
*bufp += ret;
*lenp -= ret;
ret += tmp_ret;
/* Avoid leading slash. */
if (!ret)
return ret;
tmp_ret = strscpy(*bufp, "/", *lenp);
if (tmp_ret < 0)
return tmp_ret;
*bufp += tmp_ret;
*lenp -= tmp_ret;
return ret + tmp_ret;
}
BPF_CALL_4(bpf_sysctl_get_name, struct bpf_sysctl_kern *, ctx, char *, buf,
size_t, buf_len, u64, flags)
{
ssize_t tmp_ret = 0, ret;
if (!buf)
return -EINVAL;
if (!(flags & BPF_F_SYSCTL_BASE_NAME)) {
if (!ctx->head)
return -EINVAL;
tmp_ret = sysctl_cpy_dir(ctx->head->parent, &buf, &buf_len);
if (tmp_ret < 0)
return tmp_ret;
}
ret = strscpy(buf, ctx->table->procname, buf_len);
return ret < 0 ? ret : tmp_ret + ret;
}
static const struct bpf_func_proto bpf_sysctl_get_name_proto = {
.func = bpf_sysctl_get_name,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_PTR_TO_MEM,
.arg3_type = ARG_CONST_SIZE,
.arg4_type = ARG_ANYTHING,
};
static int copy_sysctl_value(char *dst, size_t dst_len, char *src,
size_t src_len)
{
if (!dst)
return -EINVAL;
if (!dst_len)
return -E2BIG;
if (!src || !src_len) {
memset(dst, 0, dst_len);
return -EINVAL;
}
memcpy(dst, src, min(dst_len, src_len));
if (dst_len > src_len) {
memset(dst + src_len, '\0', dst_len - src_len);
return src_len;
}
dst[dst_len - 1] = '\0';
return -E2BIG;
}
BPF_CALL_3(bpf_sysctl_get_current_value, struct bpf_sysctl_kern *, ctx,
char *, buf, size_t, buf_len)
{
return copy_sysctl_value(buf, buf_len, ctx->cur_val, ctx->cur_len);
}
static const struct bpf_func_proto bpf_sysctl_get_current_value_proto = {
.func = bpf_sysctl_get_current_value,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_PTR_TO_UNINIT_MEM,
.arg3_type = ARG_CONST_SIZE,
};
BPF_CALL_3(bpf_sysctl_get_new_value, struct bpf_sysctl_kern *, ctx, char *, buf,
size_t, buf_len)
{
if (!ctx->write) {
if (buf && buf_len)
memset(buf, '\0', buf_len);
return -EINVAL;
}
return copy_sysctl_value(buf, buf_len, ctx->new_val, ctx->new_len);
}
static const struct bpf_func_proto bpf_sysctl_get_new_value_proto = {
.func = bpf_sysctl_get_new_value,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_PTR_TO_UNINIT_MEM,
.arg3_type = ARG_CONST_SIZE,
};
BPF_CALL_3(bpf_sysctl_set_new_value, struct bpf_sysctl_kern *, ctx,
const char *, buf, size_t, buf_len)
{
if (!ctx->write || !ctx->new_val || !ctx->new_len || !buf || !buf_len)
return -EINVAL;
if (buf_len > PAGE_SIZE - 1)
return -E2BIG;
memcpy(ctx->new_val, buf, buf_len);
ctx->new_len = buf_len;
ctx->new_updated = 1;
return 0;
}
static const struct bpf_func_proto bpf_sysctl_set_new_value_proto = {
.func = bpf_sysctl_set_new_value,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_PTR_TO_MEM | MEM_RDONLY,
.arg3_type = ARG_CONST_SIZE,
};
static const struct bpf_func_proto *
sysctl_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
{
switch (func_id) {
bpf: Introduce bpf_strtol and bpf_strtoul helpers Add bpf_strtol and bpf_strtoul to convert a string to long and unsigned long correspondingly. It's similar to user space strtol(3) and strtoul(3) with a few changes to the API: * instead of NUL-terminated C string the helpers expect buffer and buffer length; * resulting long or unsigned long is returned in a separate result-argument; * return value is used to indicate success or failure, on success number of consumed bytes is returned that can be used to identify position to read next if the buffer is expected to contain multiple integers; * instead of *base* argument, *flags* is used that provides base in 5 LSB, other bits are reserved for future use; * number of supported bases is limited. Documentation for the new helpers is provided in bpf.h UAPI. The helpers are made available to BPF_PROG_TYPE_CGROUP_SYSCTL programs to be able to convert string input to e.g. "ulongvec" output. E.g. "net/ipv4/tcp_mem" consists of three ulong integers. They can be parsed by calling to bpf_strtoul three times. Implementation notes: Implementation includes "../../lib/kstrtox.h" to reuse integer parsing functions. It's done exactly same way as fs/proc/base.c already does. Unfortunately existing kstrtoX function can't be used directly since they fail if any invalid character is present right after integer in the string. Existing simple_strtoX functions can't be used either since they're obsolete and don't handle overflow properly. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-19 08:55:26 +08:00
case BPF_FUNC_strtol:
return &bpf_strtol_proto;
case BPF_FUNC_strtoul:
return &bpf_strtoul_proto;
case BPF_FUNC_sysctl_get_name:
return &bpf_sysctl_get_name_proto;
case BPF_FUNC_sysctl_get_current_value:
return &bpf_sysctl_get_current_value_proto;
case BPF_FUNC_sysctl_get_new_value:
return &bpf_sysctl_get_new_value_proto;
case BPF_FUNC_sysctl_set_new_value:
return &bpf_sysctl_set_new_value_proto;
bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs Use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in tracing progs may result in locking issues. bpf_ktime_get_coarse_ns() uses ktime_get_coarse_ns() time accessor that isn't safe for any context: ====================================================== WARNING: possible circular locking dependency detected 5.15.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.4/14877 is trying to acquire lock: ffffffff8cb30008 (tk_core.seq.seqcount){----}-{0:0}, at: ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255 but task is already holding lock: ffffffff90dbf200 (&obj_hash[i].lock){-.-.}-{2:2}, at: debug_object_deactivate+0x61/0x400 lib/debugobjects.c:735 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&obj_hash[i].lock){-.-.}-{2:2}: lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd1/0x120 kernel/locking/spinlock.c:162 __debug_object_init+0xd9/0x1860 lib/debugobjects.c:569 debug_hrtimer_init kernel/time/hrtimer.c:414 [inline] debug_init kernel/time/hrtimer.c:468 [inline] hrtimer_init+0x20/0x40 kernel/time/hrtimer.c:1592 ntp_init_cmos_sync kernel/time/ntp.c:676 [inline] ntp_init+0xa1/0xad kernel/time/ntp.c:1095 timekeeping_init+0x512/0x6bf kernel/time/timekeeping.c:1639 start_kernel+0x267/0x56e init/main.c:1030 secondary_startup_64_no_verify+0xb1/0xbb -> #0 (tk_core.seq.seqcount){----}-{0:0}: check_prev_add kernel/locking/lockdep.c:3051 [inline] check_prevs_add kernel/locking/lockdep.c:3174 [inline] validate_chain+0x1dfb/0x8240 kernel/locking/lockdep.c:3789 __lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5015 lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625 seqcount_lockdep_reader_access+0xfe/0x230 include/linux/seqlock.h:103 ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255 ktime_get_coarse include/linux/timekeeping.h:120 [inline] ktime_get_coarse_ns include/linux/timekeeping.h:126 [inline] ____bpf_ktime_get_coarse_ns kernel/bpf/helpers.c:173 [inline] bpf_ktime_get_coarse_ns+0x7e/0x130 kernel/bpf/helpers.c:171 bpf_prog_a99735ebafdda2f1+0x10/0xb50 bpf_dispatcher_nop_func include/linux/bpf.h:721 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] BPF_PROG_RUN_ARRAY include/linux/bpf.h:1294 [inline] trace_call_bpf+0x2cf/0x5d0 kernel/trace/bpf_trace.c:127 perf_trace_run_bpf_submit+0x7b/0x1d0 kernel/events/core.c:9708 perf_trace_lock+0x37c/0x440 include/trace/events/lock.h:39 trace_lock_release+0x128/0x150 include/trace/events/lock.h:58 lock_release+0x82/0x810 kernel/locking/lockdep.c:5636 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:149 [inline] _raw_spin_unlock_irqrestore+0x75/0x130 kernel/locking/spinlock.c:194 debug_hrtimer_deactivate kernel/time/hrtimer.c:425 [inline] debug_deactivate kernel/time/hrtimer.c:481 [inline] __run_hrtimer kernel/time/hrtimer.c:1653 [inline] __hrtimer_run_queues+0x2f9/0xa60 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x3b3/0x1040 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0xf9/0x270 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8c/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline] _raw_spin_unlock_irqrestore+0xd4/0x130 kernel/locking/spinlock.c:194 try_to_wake_up+0x702/0xd20 kernel/sched/core.c:4118 wake_up_process kernel/sched/core.c:4200 [inline] wake_up_q+0x9a/0xf0 kernel/sched/core.c:953 futex_wake+0x50f/0x5b0 kernel/futex/waitwake.c:184 do_futex+0x367/0x560 kernel/futex/syscalls.c:127 __do_sys_futex kernel/futex/syscalls.c:199 [inline] __se_sys_futex+0x401/0x4b0 kernel/futex/syscalls.c:180 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae There is a possible deadlock with bpf_timer_* set of helpers: hrtimer_start() lock_base(); trace_hrtimer...() perf_event() bpf_run() bpf_timer_start() hrtimer_start() lock_base() <- DEADLOCK Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in BPF_PROG_TYPE_KPROBE, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT and BPF_PROG_TYPE_RAW_TRACEPOINT prog types. Fixes: d05512618056 ("bpf: Add bpf_ktime_get_coarse_ns helper") Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.") Reported-by: syzbot+43fd005b5a1b4d10781e@syzkaller.appspotmail.com Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211113142227.566439-2-me@ubique.spb.ru
2021-11-13 22:22:26 +08:00
case BPF_FUNC_ktime_get_coarse_ns:
return &bpf_ktime_get_coarse_ns_proto;
default:
return cgroup_base_func_proto(func_id, prog);
}
}
static bool sysctl_is_valid_access(int off, int size, enum bpf_access_type type,
const struct bpf_prog *prog,
struct bpf_insn_access_aux *info)
{
const int size_default = sizeof(__u32);
if (off < 0 || off + size > sizeof(struct bpf_sysctl) || off % size)
return false;
switch (off) {
bpf: Allow narrow loads of bpf_sysctl fields with offset > 0 "ctx:file_pos sysctl:read read ok narrow" works on s390 by accident: it reads the wrong byte, which happens to have the expected value of 0. Improve the test by seeking to the 4th byte and expecting 4 instead of 0. This makes the latent problem apparent: the test attempts to read the first byte of bpf_sysctl.file_pos, assuming this is the least-significant byte, which is not the case on big-endian machines: a non-zero offset is needed. The point of the test is to verify narrow loads, so we cannot cheat our way out by simply using BPF_W. The existence of the test means that such loads have to be supported, most likely because llvm can generate them. Fix the test by adding a big-endian variant, which uses an offset to access the least-significant byte of bpf_sysctl.file_pos. This reveals the final problem: verifier rejects accesses to bpf_sysctl fields with offset > 0. Such accesses are already allowed for a wide range of structs: __sk_buff, bpf_sock_addr and sk_msg_md to name a few. Extend this support to bpf_sysctl by using bpf_ctx_range instead of offsetof when matching field offsets. Fixes: 7b146cebe30c ("bpf: Sysctl hook") Fixes: e1550bfe0de4 ("bpf: Add file_pos field to bpf_sysctl ctx") Fixes: 9a1027e52535 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191028122902.9763-1-iii@linux.ibm.com
2019-10-28 20:29:02 +08:00
case bpf_ctx_range(struct bpf_sysctl, write):
if (type != BPF_READ)
return false;
bpf_ctx_record_field_size(info, size_default);
return bpf_ctx_narrow_access_ok(off, size, size_default);
bpf: Allow narrow loads of bpf_sysctl fields with offset > 0 "ctx:file_pos sysctl:read read ok narrow" works on s390 by accident: it reads the wrong byte, which happens to have the expected value of 0. Improve the test by seeking to the 4th byte and expecting 4 instead of 0. This makes the latent problem apparent: the test attempts to read the first byte of bpf_sysctl.file_pos, assuming this is the least-significant byte, which is not the case on big-endian machines: a non-zero offset is needed. The point of the test is to verify narrow loads, so we cannot cheat our way out by simply using BPF_W. The existence of the test means that such loads have to be supported, most likely because llvm can generate them. Fix the test by adding a big-endian variant, which uses an offset to access the least-significant byte of bpf_sysctl.file_pos. This reveals the final problem: verifier rejects accesses to bpf_sysctl fields with offset > 0. Such accesses are already allowed for a wide range of structs: __sk_buff, bpf_sock_addr and sk_msg_md to name a few. Extend this support to bpf_sysctl by using bpf_ctx_range instead of offsetof when matching field offsets. Fixes: 7b146cebe30c ("bpf: Sysctl hook") Fixes: e1550bfe0de4 ("bpf: Add file_pos field to bpf_sysctl ctx") Fixes: 9a1027e52535 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191028122902.9763-1-iii@linux.ibm.com
2019-10-28 20:29:02 +08:00
case bpf_ctx_range(struct bpf_sysctl, file_pos):
if (type == BPF_READ) {
bpf_ctx_record_field_size(info, size_default);
return bpf_ctx_narrow_access_ok(off, size, size_default);
} else {
return size == size_default;
}
default:
return false;
}
}
static u32 sysctl_convert_ctx_access(enum bpf_access_type type,
const struct bpf_insn *si,
struct bpf_insn *insn_buf,
struct bpf_prog *prog, u32 *target_size)
{
struct bpf_insn *insn = insn_buf;
u32 read_size;
switch (si->off) {
case offsetof(struct bpf_sysctl, write):
*insn++ = BPF_LDX_MEM(
BPF_SIZE(si->code), si->dst_reg, si->src_reg,
bpf_target_off(struct bpf_sysctl_kern, write,
sizeof_field(struct bpf_sysctl_kern,
write),
target_size));
break;
case offsetof(struct bpf_sysctl, file_pos):
/* ppos is a pointer so it should be accessed via indirect
* loads and stores. Also for stores additional temporary
* register is used since neither src_reg nor dst_reg can be
* overridden.
*/
if (type == BPF_WRITE) {
int treg = BPF_REG_9;
if (si->src_reg == treg || si->dst_reg == treg)
--treg;
if (si->src_reg == treg || si->dst_reg == treg)
--treg;
*insn++ = BPF_STX_MEM(
BPF_DW, si->dst_reg, treg,
offsetof(struct bpf_sysctl_kern, tmp_reg));
*insn++ = BPF_LDX_MEM(
BPF_FIELD_SIZEOF(struct bpf_sysctl_kern, ppos),
treg, si->dst_reg,
offsetof(struct bpf_sysctl_kern, ppos));
*insn++ = BPF_STX_MEM(
BPF_SIZEOF(u32), treg, si->src_reg,
bpf_ctx_narrow_access_offset(
0, sizeof(u32), sizeof(loff_t)));
*insn++ = BPF_LDX_MEM(
BPF_DW, treg, si->dst_reg,
offsetof(struct bpf_sysctl_kern, tmp_reg));
} else {
*insn++ = BPF_LDX_MEM(
BPF_FIELD_SIZEOF(struct bpf_sysctl_kern, ppos),
si->dst_reg, si->src_reg,
offsetof(struct bpf_sysctl_kern, ppos));
read_size = bpf_size_to_bytes(BPF_SIZE(si->code));
*insn++ = BPF_LDX_MEM(
BPF_SIZE(si->code), si->dst_reg, si->dst_reg,
bpf_ctx_narrow_access_offset(
0, read_size, sizeof(loff_t)));
}
*target_size = sizeof(u32);
break;
}
return insn - insn_buf;
}
const struct bpf_verifier_ops cg_sysctl_verifier_ops = {
.get_func_proto = sysctl_func_proto,
.is_valid_access = sysctl_is_valid_access,
.convert_ctx_access = sysctl_convert_ctx_access,
};
const struct bpf_prog_ops cg_sysctl_prog_ops = {
};
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
#ifdef CONFIG_NET
BPF_CALL_1(bpf_get_netns_cookie_sockopt, struct bpf_sockopt_kern *, ctx)
{
const struct net *net = ctx ? sock_net(ctx->sk) : &init_net;
return net->net_cookie;
}
static const struct bpf_func_proto bpf_get_netns_cookie_sockopt_proto = {
.func = bpf_get_netns_cookie_sockopt,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX_OR_NULL,
};
#endif
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
static const struct bpf_func_proto *
cg_sockopt_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
{
switch (func_id) {
#ifdef CONFIG_NET
case BPF_FUNC_get_netns_cookie:
return &bpf_get_netns_cookie_sockopt_proto;
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
case BPF_FUNC_sk_storage_get:
return &bpf_sk_storage_get_proto;
case BPF_FUNC_sk_storage_delete:
return &bpf_sk_storage_delete_proto;
case BPF_FUNC_setsockopt:
if (prog->expected_attach_type == BPF_CGROUP_SETSOCKOPT)
return &bpf_sk_setsockopt_proto;
return NULL;
case BPF_FUNC_getsockopt:
if (prog->expected_attach_type == BPF_CGROUP_SETSOCKOPT)
return &bpf_sk_getsockopt_proto;
return NULL;
#endif
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
#ifdef CONFIG_INET
case BPF_FUNC_tcp_sock:
return &bpf_tcp_sock_proto;
#endif
default:
return cgroup_base_func_proto(func_id, prog);
}
}
static bool cg_sockopt_is_valid_access(int off, int size,
enum bpf_access_type type,
const struct bpf_prog *prog,
struct bpf_insn_access_aux *info)
{
const int size_default = sizeof(__u32);
if (off < 0 || off >= sizeof(struct bpf_sockopt))
return false;
if (off % size != 0)
return false;
if (type == BPF_WRITE) {
switch (off) {
case offsetof(struct bpf_sockopt, retval):
if (size != size_default)
return false;
return prog->expected_attach_type ==
BPF_CGROUP_GETSOCKOPT;
case offsetof(struct bpf_sockopt, optname):
fallthrough;
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
case offsetof(struct bpf_sockopt, level):
if (size != size_default)
return false;
return prog->expected_attach_type ==
BPF_CGROUP_SETSOCKOPT;
case offsetof(struct bpf_sockopt, optlen):
return size == size_default;
default:
return false;
}
}
switch (off) {
case offsetof(struct bpf_sockopt, sk):
if (size != sizeof(__u64))
return false;
info->reg_type = PTR_TO_SOCKET;
break;
case offsetof(struct bpf_sockopt, optval):
if (size != sizeof(__u64))
return false;
info->reg_type = PTR_TO_PACKET;
break;
case offsetof(struct bpf_sockopt, optval_end):
if (size != sizeof(__u64))
return false;
info->reg_type = PTR_TO_PACKET_END;
break;
case offsetof(struct bpf_sockopt, retval):
if (size != size_default)
return false;
return prog->expected_attach_type == BPF_CGROUP_GETSOCKOPT;
default:
if (size != size_default)
return false;
break;
}
return true;
}
#define CG_SOCKOPT_ACCESS_FIELD(T, F) \
T(BPF_FIELD_SIZEOF(struct bpf_sockopt_kern, F), \
si->dst_reg, si->src_reg, \
offsetof(struct bpf_sockopt_kern, F))
static u32 cg_sockopt_convert_ctx_access(enum bpf_access_type type,
const struct bpf_insn *si,
struct bpf_insn *insn_buf,
struct bpf_prog *prog,
u32 *target_size)
{
struct bpf_insn *insn = insn_buf;
switch (si->off) {
case offsetof(struct bpf_sockopt, sk):
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_LDX_MEM, sk);
break;
case offsetof(struct bpf_sockopt, level):
if (type == BPF_WRITE)
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_STX_MEM, level);
else
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_LDX_MEM, level);
break;
case offsetof(struct bpf_sockopt, optname):
if (type == BPF_WRITE)
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_STX_MEM, optname);
else
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_LDX_MEM, optname);
break;
case offsetof(struct bpf_sockopt, optlen):
if (type == BPF_WRITE)
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_STX_MEM, optlen);
else
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_LDX_MEM, optlen);
break;
case offsetof(struct bpf_sockopt, retval):
BUILD_BUG_ON(offsetof(struct bpf_cg_run_ctx, run_ctx) != 0);
if (type == BPF_WRITE) {
int treg = BPF_REG_9;
if (si->src_reg == treg || si->dst_reg == treg)
--treg;
if (si->src_reg == treg || si->dst_reg == treg)
--treg;
*insn++ = BPF_STX_MEM(BPF_DW, si->dst_reg, treg,
offsetof(struct bpf_sockopt_kern, tmp_reg));
*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_sockopt_kern, current_task),
treg, si->dst_reg,
offsetof(struct bpf_sockopt_kern, current_task));
*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct task_struct, bpf_ctx),
treg, treg,
offsetof(struct task_struct, bpf_ctx));
*insn++ = BPF_STX_MEM(BPF_FIELD_SIZEOF(struct bpf_cg_run_ctx, retval),
treg, si->src_reg,
offsetof(struct bpf_cg_run_ctx, retval));
*insn++ = BPF_LDX_MEM(BPF_DW, treg, si->dst_reg,
offsetof(struct bpf_sockopt_kern, tmp_reg));
} else {
*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_sockopt_kern, current_task),
si->dst_reg, si->src_reg,
offsetof(struct bpf_sockopt_kern, current_task));
*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct task_struct, bpf_ctx),
si->dst_reg, si->dst_reg,
offsetof(struct task_struct, bpf_ctx));
*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_cg_run_ctx, retval),
si->dst_reg, si->dst_reg,
offsetof(struct bpf_cg_run_ctx, retval));
}
bpf: implement getsockopt and setsockopt hooks Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks. BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before passing them down to the kernel or bypass kernel completely. BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that kernel returns. Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure. The buffer memory is pre-allocated (because I don't think there is a precedent for working with __user memory from bpf). This might be slow to do for each {s,g}etsockopt call, that's why I've added __cgroup_bpf_prog_array_is_empty that exits early if there is nothing attached to a cgroup. Note, however, that there is a race between __cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup program layout might have changed; this should not be a problem because in general there is a race between multiple calls to {s,g}etsocktop and user adding/removing bpf progs from a cgroup. The return code of the BPF program is handled as follows: * 0: EPERM * 1: success, continue with next BPF program in the cgroup chain v9: * allow overwriting setsockopt arguments (Alexei Starovoitov): * use set_fs (same as kernel_setsockopt) * buffer is always kzalloc'd (no small on-stack buffer) v8: * use s32 for optlen (Andrii Nakryiko) v7: * return only 0 or 1 (Alexei Starovoitov) * always run all progs (Alexei Starovoitov) * use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov) (decided to use optval=-1 instead, optval=0 might be a valid input) * call getsockopt hook after kernel handlers (Alexei Starovoitov) v6: * rework cgroup chaining; stop as soon as bpf program returns 0 or 2; see patch with the documentation for the details * drop Andrii's and Martin's Acked-by (not sure they are comfortable with the new state of things) v5: * skip copy_to_user() and put_user() when ret == 0 (Martin Lau) v4: * don't export bpf_sk_fullsock helper (Martin Lau) * size != sizeof(__u64) for uapi pointers (Martin Lau) * offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau) v3: * typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko) * reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii Nakryiko) * use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau) * use BPF_FIELD_SIZEOF() for consistency (Martin Lau) * new CG_SOCKOPT_ACCESS macro to wrap repeated parts v2: * moved bpf_sockopt_kern fields around to remove a hole (Martin Lau) * aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau) * bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau) * added [0,2] return code check to verifier (Martin Lau) * dropped unused buf[64] from the stack (Martin Lau) * use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau) * dropped bpf_target_off from ctx rewrites (Martin Lau) * use return code for kernel bypass (Martin Lau & Andrii Nakryiko) Cc: Andrii Nakryiko <andriin@fb.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-28 04:38:47 +08:00
break;
case offsetof(struct bpf_sockopt, optval):
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_LDX_MEM, optval);
break;
case offsetof(struct bpf_sockopt, optval_end):
*insn++ = CG_SOCKOPT_ACCESS_FIELD(BPF_LDX_MEM, optval_end);
break;
}
return insn - insn_buf;
}
static int cg_sockopt_get_prologue(struct bpf_insn *insn_buf,
bool direct_write,
const struct bpf_prog *prog)
{
/* Nothing to do for sockopt argument. The data is kzalloc'ated.
*/
return 0;
}
const struct bpf_verifier_ops cg_sockopt_verifier_ops = {
.get_func_proto = cg_sockopt_func_proto,
.is_valid_access = cg_sockopt_is_valid_access,
.convert_ctx_access = cg_sockopt_convert_ctx_access,
.gen_prologue = cg_sockopt_get_prologue,
};
const struct bpf_prog_ops cg_sockopt_prog_ops = {
};