Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
/*
|
|
|
|
* drivers/net/ibm_newemac/tah.c
|
|
|
|
*
|
|
|
|
* Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
|
|
|
|
*
|
2007-12-05 08:14:33 +08:00
|
|
|
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
|
|
|
|
* <benh@kernel.crashing.org>
|
|
|
|
*
|
|
|
|
* Based on the arch/ppc version of the driver:
|
|
|
|
*
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
* Copyright 2004 MontaVista Software, Inc.
|
|
|
|
* Matt Porter <mporter@kernel.crashing.org>
|
|
|
|
*
|
|
|
|
* Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
|
|
|
#include "emac.h"
|
|
|
|
#include "core.h"
|
|
|
|
|
|
|
|
int __devinit tah_attach(struct of_device *ofdev, int channel)
|
|
|
|
{
|
|
|
|
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
/* Reset has been done at probe() time... nothing else to do for now */
|
|
|
|
++dev->users;
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void __devexit tah_detach(struct of_device *ofdev, int channel)
|
|
|
|
{
|
|
|
|
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
--dev->users;
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
void tah_reset(struct of_device *ofdev)
|
|
|
|
{
|
|
|
|
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
|
2007-10-15 02:36:10 +08:00
|
|
|
struct tah_regs __iomem *p = dev->base;
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
int n;
|
|
|
|
|
|
|
|
/* Reset TAH */
|
|
|
|
out_be32(&p->mr, TAH_MR_SR);
|
|
|
|
n = 100;
|
|
|
|
while ((in_be32(&p->mr) & TAH_MR_SR) && n)
|
|
|
|
--n;
|
|
|
|
|
|
|
|
if (unlikely(!n))
|
|
|
|
printk(KERN_ERR "%s: reset timeout\n", ofdev->node->full_name);
|
|
|
|
|
|
|
|
/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
|
|
|
|
out_be32(&p->mr,
|
|
|
|
TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
|
|
|
|
TAH_MR_DIG);
|
|
|
|
}
|
|
|
|
|
|
|
|
int tah_get_regs_len(struct of_device *ofdev)
|
|
|
|
{
|
|
|
|
return sizeof(struct emac_ethtool_regs_subhdr) +
|
|
|
|
sizeof(struct tah_regs);
|
|
|
|
}
|
|
|
|
|
|
|
|
void *tah_dump_regs(struct of_device *ofdev, void *buf)
|
|
|
|
{
|
|
|
|
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
struct emac_ethtool_regs_subhdr *hdr = buf;
|
|
|
|
struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
|
|
|
|
|
|
|
|
hdr->version = 0;
|
|
|
|
hdr->index = 0; /* for now, are there chips with more than one
|
|
|
|
* zmii ? if yes, then we'll add a cell_index
|
|
|
|
* like we do for emac
|
|
|
|
*/
|
|
|
|
memcpy_fromio(regs, dev->base, sizeof(struct tah_regs));
|
|
|
|
return regs + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit tah_probe(struct of_device *ofdev,
|
|
|
|
const struct of_device_id *match)
|
|
|
|
{
|
|
|
|
struct device_node *np = ofdev->node;
|
|
|
|
struct tah_instance *dev;
|
|
|
|
struct resource regs;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = -ENOMEM;
|
|
|
|
dev = kzalloc(sizeof(struct tah_instance), GFP_KERNEL);
|
|
|
|
if (dev == NULL) {
|
|
|
|
printk(KERN_ERR "%s: could not allocate TAH device!\n",
|
|
|
|
np->full_name);
|
|
|
|
goto err_gone;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_init(&dev->lock);
|
|
|
|
dev->ofdev = ofdev;
|
|
|
|
|
|
|
|
rc = -ENXIO;
|
|
|
|
if (of_address_to_resource(np, 0, ®s)) {
|
|
|
|
printk(KERN_ERR "%s: Can't get registers address\n",
|
|
|
|
np->full_name);
|
|
|
|
goto err_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = -ENOMEM;
|
2007-10-15 02:36:10 +08:00
|
|
|
dev->base = (struct tah_regs __iomem *)ioremap(regs.start,
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
sizeof(struct tah_regs));
|
|
|
|
if (dev->base == NULL) {
|
|
|
|
printk(KERN_ERR "%s: Can't map device registers!\n",
|
|
|
|
np->full_name);
|
|
|
|
goto err_free;
|
|
|
|
}
|
|
|
|
|
2007-12-05 08:14:32 +08:00
|
|
|
dev_set_drvdata(&ofdev->dev, dev);
|
|
|
|
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
/* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
|
|
|
|
tah_reset(ofdev);
|
|
|
|
|
|
|
|
printk(KERN_INFO
|
|
|
|
"TAH %s initialized\n", ofdev->node->full_name);
|
|
|
|
wmb();
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_free:
|
|
|
|
kfree(dev);
|
|
|
|
err_gone:
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devexit tah_remove(struct of_device *ofdev)
|
|
|
|
{
|
|
|
|
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
|
|
|
|
dev_set_drvdata(&ofdev->dev, NULL);
|
|
|
|
|
|
|
|
WARN_ON(dev->users != 0);
|
|
|
|
|
|
|
|
iounmap(dev->base);
|
|
|
|
kfree(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct of_device_id tah_match[] =
|
|
|
|
{
|
2008-03-13 23:59:43 +08:00
|
|
|
{
|
|
|
|
.compatible = "ibm,tah",
|
|
|
|
},
|
|
|
|
/* For backward compat with old DT */
|
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver
for the built-in ethernet found on PowerPC 4xx embedded CPUs. The
same ASIC is also found in the Axon bridge chip. This new version is
designed to work in the arch/powerpc tree, using the device tree to
probe the device, rather than the old and ugly arch/ppc OCP layer.
This driver is designed to sit alongside the old driver (that lies in
drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The
old driver is left in place to support arch/ppc until arch/ppc itself
reaches its final demise (not too long now, with luck).
This driver still has a number of things that could do with cleaning
up, but I think they can be fixed up after merging. Specifically:
- Should be adjusted to properly use the dma mapping API.
Axon needs this.
- Probe logic needs reworking, in conjuction with the general
probing code for of_platform devices. The dependencies here between
EMAC, MAL, ZMII etc. make this complicated. At present, it usually
works, because we initialize and register the sub-drivers before the
EMAC driver itself, and (being in driver code) runs after the devices
themselves have been instantiated from the device tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 11:56:01 +08:00
|
|
|
{
|
|
|
|
.type = "tah",
|
|
|
|
},
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct of_platform_driver tah_driver = {
|
|
|
|
.name = "emac-tah",
|
|
|
|
.match_table = tah_match,
|
|
|
|
|
|
|
|
.probe = tah_probe,
|
|
|
|
.remove = tah_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
int __init tah_init(void)
|
|
|
|
{
|
|
|
|
return of_register_platform_driver(&tah_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
void tah_exit(void)
|
|
|
|
{
|
|
|
|
of_unregister_platform_driver(&tah_driver);
|
|
|
|
}
|