UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/boot/dts/imx53-mba53.dts

237 lines
5.2 KiB
Plaintext
Raw Normal View History

ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
/*
* Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
* Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
ARM: imx: use #include for all device trees Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-07 10:49:34 +08:00
#include "imx53-tqma53.dtsi"
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
/ {
model = "TQ MBa53 starter kit";
compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
ARM i.MX53: mba53: Add display support As the displays are optional and we have more than one, also set the status of the parallel display and the ldb to disabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:09 +08:00
reg_backlight: fixed@0 {
compatible = "regulator-fixed";
regulator-name = "lcd-supply";
gpio = <&gpio2 5 0>;
startup-delay-us = <5000>;
enable-active-low;
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 50000 0 0>;
brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
default-brightness-level = <10>;
enable-gpios = <&gpio7 7 0>;
power-supply = <&reg_backlight>;
};
disp1: display@disp1 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp1_1>;
crtcs = <&ipu 1>;
interface-pix-fmt = "rgb24";
status = "disabled";
};
ARM i.MX53: mba53: add sound support Enable the sgtl5000 found on MBa53 mainboard. Also enable audio muxer and ssi, which are needed for sound to work. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:11 +08:00
reg_3p2v: 3p2v {
compatible = "regulator-fixed";
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
sound {
compatible = "tq,imx53-mba53-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx53-mba53-sgtl5000";
ssi-controller = <&ssi2>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <2>;
mux-ext-port = <5>;
};
ARM i.MX53: mba53: Add display support As the displays are optional and we have more than one, also set the status of the parallel display and the ldb to disabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:09 +08:00
};
&ldb {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lvds1_1>;
status = "disabled";
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
};
&iomuxc {
lvds1 {
pinctrl_lvds1_1: lvds1-grp1 {
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
fsl,pins = <
ARM i.MX53: mba53: fix lvds/disp pinctrl use NO_PAD_CTL / 0x80000000 instead of 0x10000 to prevent misconfigured pads Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> [Steffen: split up patch into tqma53+mba53 part] Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:14 +08:00
MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
>;
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
};
pinctrl_lvds1_2: lvds1-grp2 {
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
fsl,pins = <
ARM i.MX53: mba53: fix lvds/disp pinctrl use NO_PAD_CTL / 0x80000000 instead of 0x10000 to prevent misconfigured pads Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> [Steffen: split up patch into tqma53+mba53 part] Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:14 +08:00
MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
>;
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
};
};
disp1 {
pinctrl_disp1_1: disp1-grp1 {
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
fsl,pins = <
ARM i.MX53: mba53: add DI1_CLK to pinctrl for disp1 Add missing pin config Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:15 +08:00
MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
ARM i.MX53: mba53: fix lvds/disp pinctrl use NO_PAD_CTL / 0x80000000 instead of 0x10000 to prevent misconfigured pads Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> [Steffen: split up patch into tqma53+mba53 part] Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:14 +08:00
MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */
MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */
MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */
MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000
MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000
MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000
MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000
MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000
MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000
MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000
MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000
MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000
MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 10:32:52 +08:00
>;
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
};
};
ARM i.MX53: mba53: add Tevision Encoder Enable tve on MBa53. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:10 +08:00
tve {
pinctrl_vga_sync_1: vgasync-grp1 {
fsl,pins = <
/* VGA_VSYNC, HSYNC with max drive strength */
MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6
MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6
>;
};
};
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
};
&cspi {
status = "okay";
};
ARM i.MX53: mba53: add sound support Enable the sgtl5000 found on MBa53 mainboard. Also enable audio muxer and ssi, which are needed for sound to work. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:11 +08:00
&audmux {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux_1>;
};
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
&i2c2 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
ARM i.MX53: mba53: add sound support Enable the sgtl5000 found on MBa53 mainboard. Also enable audio muxer and ssi, which are needed for sound to work. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:11 +08:00
clocks = <&clks 150>;
VDDA-supply = <&reg_3p2v>;
VDDIO-supply = <&reg_3p2v>;
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
};
expander: pca9554@20 {
compatible = "pca9554";
reg = <0x20>;
interrupts = <109>;
ARM i.MX53: mba53: add missing gpio stuff for pca9554 Add properties to make use of pca9554 gpio expander. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:12 +08:00
#gpio-cells = <2>;
gpio-controller;
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
};
sensor2: lm75@49 {
compatible = "lm75";
reg = <0x49>;
};
};
&fec {
ARM i.MX53: mba53: use reset gpio for FEC Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:13 +08:00
phy-reset-gpios = <&gpio7 6 0>;
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
status = "okay";
};
&esdhc2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&ecspi1 {
status = "okay";
};
ARM i.MX53: mba53: enable usbotg & usbh1 Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:08 +08:00
&usbotg {
dr_mode = "host";
status = "okay";
};
&usbh1 {
status = "okay";
};
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
&uart1 {
status = "okay";
};
ARM i.MX53: mba53: add sound support Enable the sgtl5000 found on MBa53 mainboard. Also enable audio muxer and ssi, which are needed for sound to work. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:11 +08:00
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
};
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 18:27:27 +08:00
&uart2 {
status = "okay";
};
&can1 {
status = "okay";
};
&can2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
ARM i.MX53: mba53: add Tevision Encoder Enable tve on MBa53. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-04 19:07:10 +08:00
&tve {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vga_sync_1>;
ddc = <&i2c3>;
fsl,tve-mode = "vga";
fsl,hsync-pin = <4>;
fsl,vsync-pin = <6>;
status = "okay";
};