UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/linux/mlx5/mlx5_ifc_fpga.h

462 lines
10 KiB
C
Raw Normal View History

net/mlx5: FPGA, Add basic support for Innova Mellanox Innova is a NIC with ConnectX and an FPGA on the same board. The FPGA is a bump-on-the-wire and thus affects operation of the mlx5_core driver on the ConnectX ASIC. Add basic support for Innova in mlx5_core. This allows using the Innova card as a regular NIC, by detecting the FPGA capability bit, and verifying its load state before initializing ConnectX interfaces. Also detect FPGA fatal runtime failures and enter error state if they ever happen. All new FPGA-related logic is placed in its own subdirectory 'fpga', which may be built by selecting CONFIG_MLX5_FPGA. This prepares for further support of various Innova features in later patchsets. Additional details about hardware architecture will be provided as more features get submitted. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-03-14 02:05:45 +08:00
/*
* Copyright (c) 2017, Mellanox Technologies, Ltd. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef MLX5_IFC_FPGA_H
#define MLX5_IFC_FPGA_H
net/mlx5: Accel, Add IPSec acceleration interface Add routines for manipulating the hardware IPSec SA database (SADB). In Innova IPSec, a Security Association (SA) is added or deleted via a command message over the SBU connection. The HW then sends a response message over the same connection. Add implementation for Innova IPSec (FPGA-based) hardware. These routines will be used by the IPSec offload support in a later patch However they may also be used by others such as RDMA and RoCE IPSec. mlx5/accel is a middle acceleration layer to allow mlx5e and other ULPs to work directly with mlx5_core rather than Innova FPGA or other mlx5 acceleration providers. In this patchset we add Innova IPSec support and mlx5/accel delegates IPSec offloads to Innova routines. In the future, when IPSec/TLS or any other acceleration gets integrated into ConnectX chip, mlx5/accel layer will provide the integrated acceleration, rather than the Innova one. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-26 03:42:31 +08:00
enum {
MLX5_FPGA_CAP_SANDBOX_VENDOR_ID_MLNX = 0x2c9,
};
enum {
MLX5_FPGA_CAP_SANDBOX_PRODUCT_ID_IPSEC = 0x2,
};
net/mlx5: FPGA, Add basic support for Innova Mellanox Innova is a NIC with ConnectX and an FPGA on the same board. The FPGA is a bump-on-the-wire and thus affects operation of the mlx5_core driver on the ConnectX ASIC. Add basic support for Innova in mlx5_core. This allows using the Innova card as a regular NIC, by detecting the FPGA capability bit, and verifying its load state before initializing ConnectX interfaces. Also detect FPGA fatal runtime failures and enter error state if they ever happen. All new FPGA-related logic is placed in its own subdirectory 'fpga', which may be built by selecting CONFIG_MLX5_FPGA. This prepares for further support of various Innova features in later patchsets. Additional details about hardware architecture will be provided as more features get submitted. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-03-14 02:05:45 +08:00
struct mlx5_ifc_fpga_shell_caps_bits {
u8 max_num_qps[0x10];
u8 reserved_at_10[0x8];
u8 total_rcv_credits[0x8];
u8 reserved_at_20[0xe];
u8 qp_type[0x2];
u8 reserved_at_30[0x5];
u8 rae[0x1];
u8 rwe[0x1];
u8 rre[0x1];
u8 reserved_at_38[0x4];
u8 dc[0x1];
u8 ud[0x1];
u8 uc[0x1];
u8 rc[0x1];
u8 reserved_at_40[0x1a];
u8 log_ddr_size[0x6];
u8 max_fpga_qp_msg_size[0x20];
u8 reserved_at_80[0x180];
};
struct mlx5_ifc_fpga_cap_bits {
u8 fpga_id[0x8];
u8 fpga_device[0x18];
u8 register_file_ver[0x20];
u8 fpga_ctrl_modify[0x1];
u8 reserved_at_41[0x5];
u8 access_reg_query_mode[0x2];
u8 reserved_at_48[0x6];
u8 access_reg_modify_mode[0x2];
u8 reserved_at_50[0x10];
u8 reserved_at_60[0x20];
u8 image_version[0x20];
u8 image_date[0x20];
u8 image_time[0x20];
u8 shell_version[0x20];
u8 reserved_at_100[0x80];
struct mlx5_ifc_fpga_shell_caps_bits shell_caps;
u8 reserved_at_380[0x8];
u8 ieee_vendor_id[0x18];
u8 sandbox_product_version[0x10];
u8 sandbox_product_id[0x10];
u8 sandbox_basic_caps[0x20];
u8 reserved_at_3e0[0x10];
u8 sandbox_extended_caps_len[0x10];
u8 sandbox_extended_caps_addr[0x40];
u8 fpga_ddr_start_addr[0x40];
u8 fpga_cr_space_start_addr[0x40];
u8 fpga_ddr_size[0x20];
u8 fpga_cr_space_size[0x20];
u8 reserved_at_500[0x300];
};
net/mlx5: FPGA, Add SBU bypass and reset flows The Innova FPGA includes shell hardware and Sandbox-Unit (SBU) hardware. The shell hardware is handled by mlx5_core itself, while the SBU is handled by a client driver. Reset the SBU to a well-known initial state when initializing a new device, and set the FPGA to bypass mode when uninitializing a device. This allows the client driver to assume that its device has been reset when a new device is detected. During SBU reset, the FPGA is put into SBU-bypass mode. In this mode packets do not pass through the SBU, so it cannot affect the network data stream at all. A factory-image does not have an SBU, so skip these flows. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-18 17:54:27 +08:00
enum {
MLX5_FPGA_CTRL_OPERATION_LOAD = 0x1,
MLX5_FPGA_CTRL_OPERATION_RESET = 0x2,
MLX5_FPGA_CTRL_OPERATION_FLASH_SELECT = 0x3,
MLX5_FPGA_CTRL_OPERATION_SANDBOX_BYPASS_ON = 0x4,
MLX5_FPGA_CTRL_OPERATION_SANDBOX_BYPASS_OFF = 0x5,
MLX5_FPGA_CTRL_OPERATION_RESET_SANDBOX = 0x6,
};
net/mlx5: FPGA, Add basic support for Innova Mellanox Innova is a NIC with ConnectX and an FPGA on the same board. The FPGA is a bump-on-the-wire and thus affects operation of the mlx5_core driver on the ConnectX ASIC. Add basic support for Innova in mlx5_core. This allows using the Innova card as a regular NIC, by detecting the FPGA capability bit, and verifying its load state before initializing ConnectX interfaces. Also detect FPGA fatal runtime failures and enter error state if they ever happen. All new FPGA-related logic is placed in its own subdirectory 'fpga', which may be built by selecting CONFIG_MLX5_FPGA. This prepares for further support of various Innova features in later patchsets. Additional details about hardware architecture will be provided as more features get submitted. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-03-14 02:05:45 +08:00
struct mlx5_ifc_fpga_ctrl_bits {
u8 reserved_at_0[0x8];
u8 operation[0x8];
u8 reserved_at_10[0x8];
u8 status[0x8];
u8 reserved_at_20[0x8];
u8 flash_select_admin[0x8];
u8 reserved_at_30[0x8];
u8 flash_select_oper[0x8];
u8 reserved_at_40[0x40];
};
enum {
MLX5_FPGA_ERROR_EVENT_SYNDROME_CORRUPTED_DDR = 0x1,
MLX5_FPGA_ERROR_EVENT_SYNDROME_FLASH_TIMEOUT = 0x2,
MLX5_FPGA_ERROR_EVENT_SYNDROME_INTERNAL_LINK_ERROR = 0x3,
MLX5_FPGA_ERROR_EVENT_SYNDROME_WATCHDOG_FAILURE = 0x4,
MLX5_FPGA_ERROR_EVENT_SYNDROME_I2C_FAILURE = 0x5,
MLX5_FPGA_ERROR_EVENT_SYNDROME_IMAGE_CHANGED = 0x6,
MLX5_FPGA_ERROR_EVENT_SYNDROME_TEMPERATURE_CRITICAL = 0x7,
};
struct mlx5_ifc_fpga_error_event_bits {
u8 reserved_at_0[0x40];
u8 reserved_at_40[0x18];
u8 syndrome[0x8];
u8 reserved_at_60[0x80];
};
net/mlx5: FPGA, Add SBU infrastructure Add interface to initialize and interact with Innova FPGA SBU connections. A client driver may use these functions to set up a high-speed DMA connection with its SBU hardware logic, and send/receive messages over this connection. A later patch in this patchset will make use of these functions for Innova IPSec offload in mlx5 Ethernet driver. Add commands to retrieve Innova FPGA SBU capabilities, and to read/write Innova FPGA configuration space registers and memory, over internal I2C. At high level, the FPGA configuration space is divided such: 0x00000000 - 0x007fffff is reserved for the SBU 0x00800000 - 0xffffffff is reserved for the Shell 0x400000000 - ... is DDR memory A later patchset will add support for accessing FPGA CrSpace and memory over a high-speed connection. This is the reason for the ACCESS_TYPE enumeration, which currently only supports I2C. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-18 18:10:41 +08:00
#define MLX5_FPGA_ACCESS_REG_SIZE_MAX 64
struct mlx5_ifc_fpga_access_reg_bits {
u8 reserved_at_0[0x20];
u8 reserved_at_20[0x10];
u8 size[0x10];
u8 address[0x40];
u8 data[0][0x8];
};
net/mlx5: FPGA, Add FW commands for FPGA QPs The FPGA QP is a high-bandwidth communication channel between the host CPU and the FPGA device. It allows performing DMA operations between host memory and the FPGA logic via the ConnectX chip. Add ConnectX FW commands which create and manipulate FPGA QPs. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-03-27 19:52:09 +08:00
enum mlx5_ifc_fpga_qp_state {
MLX5_FPGA_QPC_STATE_INIT = 0x0,
MLX5_FPGA_QPC_STATE_ACTIVE = 0x1,
MLX5_FPGA_QPC_STATE_ERROR = 0x2,
};
enum mlx5_ifc_fpga_qp_type {
MLX5_FPGA_QPC_QP_TYPE_SHELL_QP = 0x0,
MLX5_FPGA_QPC_QP_TYPE_SANDBOX_QP = 0x1,
};
enum mlx5_ifc_fpga_qp_service_type {
MLX5_FPGA_QPC_ST_RC = 0x0,
};
struct mlx5_ifc_fpga_qpc_bits {
u8 state[0x4];
u8 reserved_at_4[0x1b];
u8 qp_type[0x1];
u8 reserved_at_20[0x4];
u8 st[0x4];
u8 reserved_at_28[0x10];
u8 traffic_class[0x8];
u8 ether_type[0x10];
u8 prio[0x3];
u8 dei[0x1];
u8 vid[0xc];
u8 reserved_at_60[0x20];
u8 reserved_at_80[0x8];
u8 next_rcv_psn[0x18];
u8 reserved_at_a0[0x8];
u8 next_send_psn[0x18];
u8 reserved_at_c0[0x10];
u8 pkey[0x10];
u8 reserved_at_e0[0x8];
u8 remote_qpn[0x18];
u8 reserved_at_100[0x15];
u8 rnr_retry[0x3];
u8 reserved_at_118[0x5];
u8 retry_count[0x3];
u8 reserved_at_120[0x20];
u8 reserved_at_140[0x10];
u8 remote_mac_47_32[0x10];
u8 remote_mac_31_0[0x20];
u8 remote_ip[16][0x8];
u8 reserved_at_200[0x40];
u8 reserved_at_240[0x10];
u8 fpga_mac_47_32[0x10];
u8 fpga_mac_31_0[0x20];
u8 fpga_ip[16][0x8];
};
struct mlx5_ifc_fpga_create_qp_in_bits {
u8 opcode[0x10];
u8 reserved_at_10[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
u8 reserved_at_40[0x40];
struct mlx5_ifc_fpga_qpc_bits fpga_qpc;
};
struct mlx5_ifc_fpga_create_qp_out_bits {
u8 status[0x8];
u8 reserved_at_8[0x18];
u8 syndrome[0x20];
u8 reserved_at_40[0x8];
u8 fpga_qpn[0x18];
u8 reserved_at_60[0x20];
struct mlx5_ifc_fpga_qpc_bits fpga_qpc;
};
struct mlx5_ifc_fpga_modify_qp_in_bits {
u8 opcode[0x10];
u8 reserved_at_10[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
u8 reserved_at_40[0x8];
u8 fpga_qpn[0x18];
u8 field_select[0x20];
struct mlx5_ifc_fpga_qpc_bits fpga_qpc;
};
struct mlx5_ifc_fpga_modify_qp_out_bits {
u8 status[0x8];
u8 reserved_at_8[0x18];
u8 syndrome[0x20];
u8 reserved_at_40[0x40];
};
struct mlx5_ifc_fpga_query_qp_in_bits {
u8 opcode[0x10];
u8 reserved_at_10[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
u8 reserved_at_40[0x8];
u8 fpga_qpn[0x18];
u8 reserved_at_60[0x20];
};
struct mlx5_ifc_fpga_query_qp_out_bits {
u8 status[0x8];
u8 reserved_at_8[0x18];
u8 syndrome[0x20];
u8 reserved_at_40[0x40];
struct mlx5_ifc_fpga_qpc_bits fpga_qpc;
};
struct mlx5_ifc_fpga_query_qp_counters_in_bits {
u8 opcode[0x10];
u8 reserved_at_10[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
u8 clear[0x1];
u8 reserved_at_41[0x7];
u8 fpga_qpn[0x18];
u8 reserved_at_60[0x20];
};
struct mlx5_ifc_fpga_query_qp_counters_out_bits {
u8 status[0x8];
u8 reserved_at_8[0x18];
u8 syndrome[0x20];
u8 reserved_at_40[0x40];
u8 rx_ack_packets[0x40];
u8 rx_send_packets[0x40];
u8 tx_ack_packets[0x40];
u8 tx_send_packets[0x40];
u8 rx_total_drop[0x40];
u8 reserved_at_1c0[0x1c0];
};
struct mlx5_ifc_fpga_destroy_qp_in_bits {
u8 opcode[0x10];
u8 reserved_at_10[0x10];
u8 reserved_at_20[0x10];
u8 op_mod[0x10];
u8 reserved_at_40[0x8];
u8 fpga_qpn[0x18];
u8 reserved_at_60[0x20];
};
struct mlx5_ifc_fpga_destroy_qp_out_bits {
u8 status[0x8];
u8 reserved_at_8[0x18];
u8 syndrome[0x20];
u8 reserved_at_40[0x40];
};
net/mlx5: Accel, Add IPSec acceleration interface Add routines for manipulating the hardware IPSec SA database (SADB). In Innova IPSec, a Security Association (SA) is added or deleted via a command message over the SBU connection. The HW then sends a response message over the same connection. Add implementation for Innova IPSec (FPGA-based) hardware. These routines will be used by the IPSec offload support in a later patch However they may also be used by others such as RDMA and RoCE IPSec. mlx5/accel is a middle acceleration layer to allow mlx5e and other ULPs to work directly with mlx5_core rather than Innova FPGA or other mlx5 acceleration providers. In this patchset we add Innova IPSec support and mlx5/accel delegates IPSec offloads to Innova routines. In the future, when IPSec/TLS or any other acceleration gets integrated into ConnectX chip, mlx5/accel layer will provide the integrated acceleration, rather than the Innova one. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-26 03:42:31 +08:00
struct mlx5_ifc_ipsec_extended_cap_bits {
u8 encapsulation[0x20];
net/mlx5: IPSec, Add command V2 support This patch adds V2 command support. New fpga devices support extended features (udp encap, esn etc...), this features require new hardware sadb format therefore we have a new version of commands to manipulate it. Signed-off-by: Yossef Efraim <yossefe@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-01-16 22:12:22 +08:00
u8 reserved_0[0x12];
u8 v2_command[0x1];
u8 udp_encap[0x1];
net/mlx5e: IPSec, Add support for ESP trailer removal by hardware Current hardware decrypts and authenticates incoming ESP packets. Subsequently, the software extracts the nexthdr field, truncates the trailer and adjusts csum accordingly. With this patch and a capable device, the trailer is being removed by the hardware and the nexthdr field is conveyed via PET. This way we avoid both the need to access the trailer (cache miss) and to compute its relative checksum, which significantly improve the performance. Experiment shows that trailer removal improves the performance by 2Gbps, (netperf). Both forwarding and host-to-host configurations. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-10-23 00:45:45 +08:00
u8 rx_no_trailer[0x1];
net/mlx5: Accel, Add IPSec acceleration interface Add routines for manipulating the hardware IPSec SA database (SADB). In Innova IPSec, a Security Association (SA) is added or deleted via a command message over the SBU connection. The HW then sends a response message over the same connection. Add implementation for Innova IPSec (FPGA-based) hardware. These routines will be used by the IPSec offload support in a later patch However they may also be used by others such as RDMA and RoCE IPSec. mlx5/accel is a middle acceleration layer to allow mlx5e and other ULPs to work directly with mlx5_core rather than Innova FPGA or other mlx5 acceleration providers. In this patchset we add Innova IPSec support and mlx5/accel delegates IPSec offloads to Innova routines. In the future, when IPSec/TLS or any other acceleration gets integrated into ConnectX chip, mlx5/accel layer will provide the integrated acceleration, rather than the Innova one. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-26 03:42:31 +08:00
u8 ipv4_fragment[0x1];
u8 ipv6[0x1];
u8 esn[0x1];
u8 lso[0x1];
u8 transport_and_tunnel_mode[0x1];
u8 tunnel_mode[0x1];
u8 transport_mode[0x1];
u8 ah_esp[0x1];
u8 esp[0x1];
u8 ah[0x1];
u8 ipv4_options[0x1];
u8 auth_alg[0x20];
u8 enc_alg[0x20];
u8 sa_cap[0x20];
u8 reserved_1[0x10];
u8 number_of_ipsec_counters[0x10];
u8 ipsec_counters_addr_low[0x20];
u8 ipsec_counters_addr_high[0x20];
};
struct mlx5_ifc_ipsec_counters_bits {
u8 dec_in_packets[0x40];
u8 dec_out_packets[0x40];
u8 dec_bypass_packets[0x40];
u8 enc_in_packets[0x40];
u8 enc_out_packets[0x40];
u8 enc_bypass_packets[0x40];
u8 drop_dec_packets[0x40];
u8 failed_auth_dec_packets[0x40];
u8 drop_enc_packets[0x40];
u8 success_add_sa[0x40];
u8 fail_add_sa[0x40];
u8 success_delete_sa[0x40];
u8 fail_delete_sa[0x40];
u8 dropped_cmd[0x40];
};
net/mlx5: IPSec, Generalize sandbox QP commands The current code assume only SA QP commands. Refactor in order to pave the way for new QP commands: 1. Generic cmd response format. 2. SA cmd checks are in dedicated functions. 3. Aligned debug prints. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-10-23 00:43:58 +08:00
enum mlx5_ifc_fpga_ipsec_response_syndrome {
MLX5_FPGA_IPSEC_RESPONSE_SUCCESS = 0,
MLX5_FPGA_IPSEC_RESPONSE_ILLEGAL_REQUEST = 1,
MLX5_FPGA_IPSEC_RESPONSE_SADB_ISSUE = 2,
MLX5_FPGA_IPSEC_RESPONSE_WRITE_RESPONSE_ISSUE = 3,
};
struct mlx5_ifc_fpga_ipsec_cmd_resp {
__be32 syndrome;
union {
__be32 sw_sa_handle;
__be32 flags;
};
u8 reserved[24];
} __packed;
net/mlx5e: IPSec, Add support for ESP trailer removal by hardware Current hardware decrypts and authenticates incoming ESP packets. Subsequently, the software extracts the nexthdr field, truncates the trailer and adjusts csum accordingly. With this patch and a capable device, the trailer is being removed by the hardware and the nexthdr field is conveyed via PET. This way we avoid both the need to access the trailer (cache miss) and to compute its relative checksum, which significantly improve the performance. Experiment shows that trailer removal improves the performance by 2Gbps, (netperf). Both forwarding and host-to-host configurations. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-10-23 00:45:45 +08:00
enum mlx5_ifc_fpga_ipsec_cap {
MLX5_FPGA_IPSEC_CAP_NO_TRAILER = BIT(0),
};
struct mlx5_ifc_fpga_ipsec_cmd_cap {
__be32 cmd;
__be32 flags;
u8 reserved[24];
} __packed;
net/mlx5: FPGA, Add basic support for Innova Mellanox Innova is a NIC with ConnectX and an FPGA on the same board. The FPGA is a bump-on-the-wire and thus affects operation of the mlx5_core driver on the ConnectX ASIC. Add basic support for Innova in mlx5_core. This allows using the Innova card as a regular NIC, by detecting the FPGA capability bit, and verifying its load state before initializing ConnectX interfaces. Also detect FPGA fatal runtime failures and enter error state if they ever happen. All new FPGA-related logic is placed in its own subdirectory 'fpga', which may be built by selecting CONFIG_MLX5_FPGA. This prepares for further support of various Innova features in later patchsets. Additional details about hardware architecture will be provided as more features get submitted. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-03-14 02:05:45 +08:00
#endif /* MLX5_IFC_FPGA_H */