OpenCloudOS-Kernel/drivers/media/rc/ir-sony-decoder.c

196 lines
4.8 KiB
C
Raw Normal View History

/* ir-sony-decoder.c - handle Sony IR Pulse/Space protocol
*
* Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/bitrev.h>
#include <linux/module.h>
#include "rc-core-priv.h"
#define SONY_UNIT 600000 /* ns */
#define SONY_HEADER_PULSE (4 * SONY_UNIT)
#define SONY_HEADER_SPACE (1 * SONY_UNIT)
#define SONY_BIT_0_PULSE (1 * SONY_UNIT)
#define SONY_BIT_1_PULSE (2 * SONY_UNIT)
#define SONY_BIT_SPACE (1 * SONY_UNIT)
#define SONY_TRAILER_SPACE (10 * SONY_UNIT) /* minimum */
enum sony_state {
STATE_INACTIVE,
STATE_HEADER_SPACE,
STATE_BIT_PULSE,
STATE_BIT_SPACE,
STATE_FINISHED,
};
/**
* ir_sony_decode() - Decode one Sony pulse or space
* @dev: the struct rc_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
{
struct sony_dec *data = &dev->raw->sony;
u32 scancode;
u8 device, subdevice, function;
if (!rc_protocols_enabled(dev, RC_BIT_SONY12 | RC_BIT_SONY15 |
RC_BIT_SONY20))
return 0;
if (!is_timing_event(ev)) {
if (ev.reset)
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2))
goto out;
IR_dprintk(2, "Sony decode started at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2))
break;
data->count = 0;
data->state = STATE_HEADER_SPACE;
return 0;
case STATE_HEADER_SPACE:
if (ev.pulse)
break;
if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2))
break;
data->state = STATE_BIT_PULSE;
return 0;
case STATE_BIT_PULSE:
if (!ev.pulse)
break;
data->bits <<= 1;
if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2))
data->bits |= 1;
else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2))
break;
data->count++;
data->state = STATE_BIT_SPACE;
return 0;
case STATE_BIT_SPACE:
if (ev.pulse)
break;
if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2))
break;
decrease_duration(&ev, SONY_BIT_SPACE);
if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) {
data->state = STATE_BIT_PULSE;
return 0;
}
data->state = STATE_FINISHED;
/* Fall through */
case STATE_FINISHED:
if (ev.pulse)
break;
if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2))
break;
switch (data->count) {
case 12:
if (!rc_protocols_enabled(dev, RC_BIT_SONY12)) {
[media] rc-core: add separate defines for protocol bitmaps and numbers The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-12 06:11:54 +08:00
data->state = STATE_INACTIVE;
return 0;
}
device = bitrev8((data->bits << 3) & 0xF8);
subdevice = 0;
function = bitrev8((data->bits >> 4) & 0xFE);
break;
case 15:
if (!rc_protocols_enabled(dev, RC_BIT_SONY15)) {
[media] rc-core: add separate defines for protocol bitmaps and numbers The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-12 06:11:54 +08:00
data->state = STATE_INACTIVE;
return 0;
}
device = bitrev8((data->bits >> 0) & 0xFF);
subdevice = 0;
function = bitrev8((data->bits >> 7) & 0xFE);
break;
case 20:
if (!rc_protocols_enabled(dev, RC_BIT_SONY20)) {
[media] rc-core: add separate defines for protocol bitmaps and numbers The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-12 06:11:54 +08:00
data->state = STATE_INACTIVE;
return 0;
}
device = bitrev8((data->bits >> 5) & 0xF8);
subdevice = bitrev8((data->bits >> 0) & 0xFF);
function = bitrev8((data->bits >> 12) & 0xFE);
break;
default:
IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
goto out;
}
scancode = device << 16 | subdevice << 8 | function;
IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
rc_keydown(dev, scancode, 0);
data->state = STATE_INACTIVE;
return 0;
}
out:
IR_dprintk(1, "Sony decode failed at state %d (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}
static struct ir_raw_handler sony_handler = {
[media] rc-core: add separate defines for protocol bitmaps and numbers The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-12 06:11:54 +08:00
.protocols = RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20,
.decode = ir_sony_decode,
};
static int __init ir_sony_decode_init(void)
{
ir_raw_handler_register(&sony_handler);
printk(KERN_INFO "IR Sony protocol handler initialized\n");
return 0;
}
static void __exit ir_sony_decode_exit(void)
{
ir_raw_handler_unregister(&sony_handler);
}
module_init(ir_sony_decode_init);
module_exit(ir_sony_decode_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
MODULE_DESCRIPTION("Sony IR protocol decoder");