OpenCloudOS-Kernel/mm/percpu.c

2791 lines
85 KiB
C
Raw Normal View History

/*
* mm/percpu.c - percpu memory allocator
*
* Copyright (C) 2009 SUSE Linux Products GmbH
* Copyright (C) 2009 Tejun Heo <tj@kernel.org>
*
* Copyright (C) 2017 Facebook Inc.
* Copyright (C) 2017 Dennis Zhou <dennisszhou@gmail.com>
*
* This file is released under the GPLv2 license.
*
* The percpu allocator handles both static and dynamic areas. Percpu
* areas are allocated in chunks which are divided into units. There is
* a 1-to-1 mapping for units to possible cpus. These units are grouped
* based on NUMA properties of the machine.
*
* c0 c1 c2
* ------------------- ------------------- ------------
* | u0 | u1 | u2 | u3 | | u0 | u1 | u2 | u3 | | u0 | u1 | u
* ------------------- ...... ------------------- .... ------------
*
* Allocation is done by offsets into a unit's address space. Ie., an
* area of 512 bytes at 6k in c1 occupies 512 bytes at 6k in c1:u0,
* c1:u1, c1:u2, etc. On NUMA machines, the mapping may be non-linear
* and even sparse. Access is handled by configuring percpu base
* registers according to the cpu to unit mappings and offsetting the
* base address using pcpu_unit_size.
*
* There is special consideration for the first chunk which must handle
* the static percpu variables in the kernel image as allocation services
* are not online yet. In short, the first chunk is structured like so:
*
* <Static | [Reserved] | Dynamic>
*
* The static data is copied from the original section managed by the
* linker. The reserved section, if non-zero, primarily manages static
* percpu variables from kernel modules. Finally, the dynamic section
* takes care of normal allocations.
*
* The allocator organizes chunks into lists according to free size and
* tries to allocate from the fullest chunk first. Each chunk is managed
* by a bitmap with metadata blocks. The allocation map is updated on
* every allocation and free to reflect the current state while the boundary
* map is only updated on allocation. Each metadata block contains
* information to help mitigate the need to iterate over large portions
* of the bitmap. The reverse mapping from page to chunk is stored in
* the page's index. Lastly, units are lazily backed and grow in unison.
*
* There is a unique conversion that goes on here between bytes and bits.
* Each bit represents a fragment of size PCPU_MIN_ALLOC_SIZE. The chunk
* tracks the number of pages it is responsible for in nr_pages. Helper
* functions are used to convert from between the bytes, bits, and blocks.
* All hints are managed in bits unless explicitly stated.
*
* To use this allocator, arch code should do the following:
*
* - define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr() to translate
* regular address to percpu pointer and back if they need to be
* different from the default
*
* - use pcpu_setup_first_chunk() during percpu area initialization to
* setup the first chunk containing the kernel static percpu area
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/bitmap.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:49 +08:00
#include <linux/memblock.h>
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
#include <linux/err.h>
#include <linux/lcm.h>
#include <linux/list.h>
#include <linux/log2.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/percpu.h>
#include <linux/pfn.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
#include <linux/workqueue.h>
#include <linux/kmemleak.h>
#include <linux/sched.h>
#include <asm/cacheflush.h>
#include <asm/sections.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
#define CREATE_TRACE_POINTS
#include <trace/events/percpu.h>
#include "percpu-internal.h"
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/* the slots are sorted by free bytes left, 1-31 bytes share the same slot */
#define PCPU_SLOT_BASE_SHIFT 5
#define PCPU_EMPTY_POP_PAGES_LOW 2
#define PCPU_EMPTY_POP_PAGES_HIGH 4
#ifdef CONFIG_SMP
/* default addr <-> pcpu_ptr mapping, override in asm/percpu.h if necessary */
#ifndef __addr_to_pcpu_ptr
#define __addr_to_pcpu_ptr(addr) \
(void __percpu *)((unsigned long)(addr) - \
(unsigned long)pcpu_base_addr + \
(unsigned long)__per_cpu_start)
#endif
#ifndef __pcpu_ptr_to_addr
#define __pcpu_ptr_to_addr(ptr) \
(void __force *)((unsigned long)(ptr) + \
(unsigned long)pcpu_base_addr - \
(unsigned long)__per_cpu_start)
#endif
#else /* CONFIG_SMP */
/* on UP, it's always identity mapped */
#define __addr_to_pcpu_ptr(addr) (void __percpu *)(addr)
#define __pcpu_ptr_to_addr(ptr) (void __force *)(ptr)
#endif /* CONFIG_SMP */
static int pcpu_unit_pages __ro_after_init;
static int pcpu_unit_size __ro_after_init;
static int pcpu_nr_units __ro_after_init;
static int pcpu_atom_size __ro_after_init;
int pcpu_nr_slots __ro_after_init;
static size_t pcpu_chunk_struct_size __ro_after_init;
/* cpus with the lowest and highest unit addresses */
static unsigned int pcpu_low_unit_cpu __ro_after_init;
static unsigned int pcpu_high_unit_cpu __ro_after_init;
/* the address of the first chunk which starts with the kernel static area */
void *pcpu_base_addr __ro_after_init;
EXPORT_SYMBOL_GPL(pcpu_base_addr);
static const int *pcpu_unit_map __ro_after_init; /* cpu -> unit */
const unsigned long *pcpu_unit_offsets __ro_after_init; /* cpu -> unit offset */
/* group information, used for vm allocation */
static int pcpu_nr_groups __ro_after_init;
static const unsigned long *pcpu_group_offsets __ro_after_init;
static const size_t *pcpu_group_sizes __ro_after_init;
/*
* The first chunk which always exists. Note that unlike other
* chunks, this one can be allocated and mapped in several different
* ways and thus often doesn't live in the vmalloc area.
*/
struct pcpu_chunk *pcpu_first_chunk __ro_after_init;
/*
* Optional reserved chunk. This chunk reserves part of the first
* chunk and serves it for reserved allocations. When the reserved
* region doesn't exist, the following variable is NULL.
*/
struct pcpu_chunk *pcpu_reserved_chunk __ro_after_init;
DEFINE_SPINLOCK(pcpu_lock); /* all internal data structures */
static DEFINE_MUTEX(pcpu_alloc_mutex); /* chunk create/destroy, [de]pop, map ext */
struct list_head *pcpu_slot __ro_after_init; /* chunk list slots */
/* chunks which need their map areas extended, protected by pcpu_lock */
static LIST_HEAD(pcpu_map_extend_chunks);
/*
* The number of empty populated pages, protected by pcpu_lock. The
* reserved chunk doesn't contribute to the count.
*/
int pcpu_nr_empty_pop_pages;
/proc/meminfo: add percpu populated pages count Currently, percpu memory only exposes allocation and utilization information via debugfs. This more or less is only really useful for understanding the fragmentation and allocation information at a per-chunk level with a few global counters. This is also gated behind a config. BPF and cgroup, for example, have seen an increase in use causing increased use of percpu memory. Let's make it easier for someone to identify how much memory is being used. This patch adds the "Percpu" stat to meminfo to more easily look up how much percpu memory is in use. This number includes the cost for all allocated backing pages and not just insight at the per a unit, per chunk level. Metadata is excluded. I think excluding metadata is fair because the backing memory scales with the numbere of cpus and can quickly outweigh the metadata. It also makes this calculation light. Link: http://lkml.kernel.org/r/20180807184723.74919-1-dennisszhou@gmail.com Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 12:53:58 +08:00
/*
* The number of populated pages in use by the allocator, protected by
* pcpu_lock. This number is kept per a unit per chunk (i.e. when a page gets
* allocated/deallocated, it is allocated/deallocated in all units of a chunk
* and increments/decrements this count by 1).
*/
static unsigned long pcpu_nr_populated;
/*
* Balance work is used to populate or destroy chunks asynchronously. We
* try to keep the number of populated free pages between
* PCPU_EMPTY_POP_PAGES_LOW and HIGH for atomic allocations and at most one
* empty chunk.
*/
static void pcpu_balance_workfn(struct work_struct *work);
static DECLARE_WORK(pcpu_balance_work, pcpu_balance_workfn);
static bool pcpu_async_enabled __read_mostly;
static bool pcpu_atomic_alloc_failed;
static void pcpu_schedule_balance_work(void)
{
if (pcpu_async_enabled)
schedule_work(&pcpu_balance_work);
}
/**
* pcpu_addr_in_chunk - check if the address is served from this chunk
* @chunk: chunk of interest
* @addr: percpu address
*
* RETURNS:
* True if the address is served from this chunk.
*/
static bool pcpu_addr_in_chunk(struct pcpu_chunk *chunk, void *addr)
{
void *start_addr, *end_addr;
if (!chunk)
return false;
start_addr = chunk->base_addr + chunk->start_offset;
end_addr = chunk->base_addr + chunk->nr_pages * PAGE_SIZE -
chunk->end_offset;
return addr >= start_addr && addr < end_addr;
}
static int __pcpu_size_to_slot(int size)
{
int highbit = fls(size); /* size is in bytes */
return max(highbit - PCPU_SLOT_BASE_SHIFT + 2, 1);
}
static int pcpu_size_to_slot(int size)
{
if (size == pcpu_unit_size)
return pcpu_nr_slots - 1;
return __pcpu_size_to_slot(size);
}
static int pcpu_chunk_slot(const struct pcpu_chunk *chunk)
{
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
if (chunk->free_bytes < PCPU_MIN_ALLOC_SIZE || chunk->contig_bits == 0)
return 0;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
return pcpu_size_to_slot(chunk->free_bytes);
}
/* set the pointer to a chunk in a page struct */
static void pcpu_set_page_chunk(struct page *page, struct pcpu_chunk *pcpu)
{
page->index = (unsigned long)pcpu;
}
/* obtain pointer to a chunk from a page struct */
static struct pcpu_chunk *pcpu_get_page_chunk(struct page *page)
{
return (struct pcpu_chunk *)page->index;
}
static int __maybe_unused pcpu_page_idx(unsigned int cpu, int page_idx)
{
return pcpu_unit_map[cpu] * pcpu_unit_pages + page_idx;
}
static unsigned long pcpu_unit_page_offset(unsigned int cpu, int page_idx)
{
return pcpu_unit_offsets[cpu] + (page_idx << PAGE_SHIFT);
}
static unsigned long pcpu_chunk_addr(struct pcpu_chunk *chunk,
unsigned int cpu, int page_idx)
{
return (unsigned long)chunk->base_addr +
pcpu_unit_page_offset(cpu, page_idx);
}
static void pcpu_next_unpop(unsigned long *bitmap, int *rs, int *re, int end)
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
{
*rs = find_next_zero_bit(bitmap, end, *rs);
*re = find_next_bit(bitmap, end, *rs + 1);
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
}
static void pcpu_next_pop(unsigned long *bitmap, int *rs, int *re, int end)
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
{
*rs = find_next_bit(bitmap, end, *rs);
*re = find_next_zero_bit(bitmap, end, *rs + 1);
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
}
/*
* Bitmap region iterators. Iterates over the bitmap between
* [@start, @end) in @chunk. @rs and @re should be integer variables
* and will be set to start and end index of the current free region.
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
*/
#define pcpu_for_each_unpop_region(bitmap, rs, re, start, end) \
for ((rs) = (start), pcpu_next_unpop((bitmap), &(rs), &(re), (end)); \
(rs) < (re); \
(rs) = (re) + 1, pcpu_next_unpop((bitmap), &(rs), &(re), (end)))
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
#define pcpu_for_each_pop_region(bitmap, rs, re, start, end) \
for ((rs) = (start), pcpu_next_pop((bitmap), &(rs), &(re), (end)); \
(rs) < (re); \
(rs) = (re) + 1, pcpu_next_pop((bitmap), &(rs), &(re), (end)))
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
/*
* The following are helper functions to help access bitmaps and convert
* between bitmap offsets to address offsets.
*/
static unsigned long *pcpu_index_alloc_map(struct pcpu_chunk *chunk, int index)
{
return chunk->alloc_map +
(index * PCPU_BITMAP_BLOCK_BITS / BITS_PER_LONG);
}
static unsigned long pcpu_off_to_block_index(int off)
{
return off / PCPU_BITMAP_BLOCK_BITS;
}
static unsigned long pcpu_off_to_block_off(int off)
{
return off & (PCPU_BITMAP_BLOCK_BITS - 1);
}
static unsigned long pcpu_block_off_to_off(int index, int off)
{
return index * PCPU_BITMAP_BLOCK_BITS + off;
}
/**
* pcpu_next_md_free_region - finds the next hint free area
* @chunk: chunk of interest
* @bit_off: chunk offset
* @bits: size of free area
*
* Helper function for pcpu_for_each_md_free_region. It checks
* block->contig_hint and performs aggregation across blocks to find the
* next hint. It modifies bit_off and bits in-place to be consumed in the
* loop.
*/
static void pcpu_next_md_free_region(struct pcpu_chunk *chunk, int *bit_off,
int *bits)
{
int i = pcpu_off_to_block_index(*bit_off);
int block_off = pcpu_off_to_block_off(*bit_off);
struct pcpu_block_md *block;
*bits = 0;
for (block = chunk->md_blocks + i; i < pcpu_chunk_nr_blocks(chunk);
block++, i++) {
/* handles contig area across blocks */
if (*bits) {
*bits += block->left_free;
if (block->left_free == PCPU_BITMAP_BLOCK_BITS)
continue;
return;
}
/*
* This checks three things. First is there a contig_hint to
* check. Second, have we checked this hint before by
* comparing the block_off. Third, is this the same as the
* right contig hint. In the last case, it spills over into
* the next block and should be handled by the contig area
* across blocks code.
*/
*bits = block->contig_hint;
if (*bits && block->contig_hint_start >= block_off &&
*bits + block->contig_hint_start < PCPU_BITMAP_BLOCK_BITS) {
*bit_off = pcpu_block_off_to_off(i,
block->contig_hint_start);
return;
}
/* reset to satisfy the second predicate above */
block_off = 0;
*bits = block->right_free;
*bit_off = (i + 1) * PCPU_BITMAP_BLOCK_BITS - block->right_free;
}
}
/**
* pcpu_next_fit_region - finds fit areas for a given allocation request
* @chunk: chunk of interest
* @alloc_bits: size of allocation
* @align: alignment of area (max PAGE_SIZE)
* @bit_off: chunk offset
* @bits: size of free area
*
* Finds the next free region that is viable for use with a given size and
* alignment. This only returns if there is a valid area to be used for this
* allocation. block->first_free is returned if the allocation request fits
* within the block to see if the request can be fulfilled prior to the contig
* hint.
*/
static void pcpu_next_fit_region(struct pcpu_chunk *chunk, int alloc_bits,
int align, int *bit_off, int *bits)
{
int i = pcpu_off_to_block_index(*bit_off);
int block_off = pcpu_off_to_block_off(*bit_off);
struct pcpu_block_md *block;
*bits = 0;
for (block = chunk->md_blocks + i; i < pcpu_chunk_nr_blocks(chunk);
block++, i++) {
/* handles contig area across blocks */
if (*bits) {
*bits += block->left_free;
if (*bits >= alloc_bits)
return;
if (block->left_free == PCPU_BITMAP_BLOCK_BITS)
continue;
}
/* check block->contig_hint */
*bits = ALIGN(block->contig_hint_start, align) -
block->contig_hint_start;
/*
* This uses the block offset to determine if this has been
* checked in the prior iteration.
*/
if (block->contig_hint &&
block->contig_hint_start >= block_off &&
block->contig_hint >= *bits + alloc_bits) {
*bits += alloc_bits + block->contig_hint_start -
block->first_free;
*bit_off = pcpu_block_off_to_off(i, block->first_free);
return;
}
/* reset to satisfy the second predicate above */
block_off = 0;
*bit_off = ALIGN(PCPU_BITMAP_BLOCK_BITS - block->right_free,
align);
*bits = PCPU_BITMAP_BLOCK_BITS - *bit_off;
*bit_off = pcpu_block_off_to_off(i, *bit_off);
if (*bits >= alloc_bits)
return;
}
/* no valid offsets were found - fail condition */
*bit_off = pcpu_chunk_map_bits(chunk);
}
/*
* Metadata free area iterators. These perform aggregation of free areas
* based on the metadata blocks and return the offset @bit_off and size in
* bits of the free area @bits. pcpu_for_each_fit_region only returns when
* a fit is found for the allocation request.
*/
#define pcpu_for_each_md_free_region(chunk, bit_off, bits) \
for (pcpu_next_md_free_region((chunk), &(bit_off), &(bits)); \
(bit_off) < pcpu_chunk_map_bits((chunk)); \
(bit_off) += (bits) + 1, \
pcpu_next_md_free_region((chunk), &(bit_off), &(bits)))
#define pcpu_for_each_fit_region(chunk, alloc_bits, align, bit_off, bits) \
for (pcpu_next_fit_region((chunk), (alloc_bits), (align), &(bit_off), \
&(bits)); \
(bit_off) < pcpu_chunk_map_bits((chunk)); \
(bit_off) += (bits), \
pcpu_next_fit_region((chunk), (alloc_bits), (align), &(bit_off), \
&(bits)))
/**
* pcpu_mem_zalloc - allocate memory
* @size: bytes to allocate
* @gfp: allocation flags
*
* Allocate @size bytes. If @size is smaller than PAGE_SIZE,
* kzalloc() is used; otherwise, the equivalent of vzalloc() is used.
* This is to facilitate passing through whitelisted flags. The
* returned memory is always zeroed.
*
* RETURNS:
* Pointer to the allocated area on success, NULL on failure.
*/
static void *pcpu_mem_zalloc(size_t size, gfp_t gfp)
{
if (WARN_ON_ONCE(!slab_is_available()))
return NULL;
if (size <= PAGE_SIZE)
return kzalloc(size, gfp);
else
return __vmalloc(size, gfp | __GFP_ZERO, PAGE_KERNEL);
}
/**
* pcpu_mem_free - free memory
* @ptr: memory to free
*
* Free @ptr. @ptr should have been allocated using pcpu_mem_zalloc().
*/
static void pcpu_mem_free(void *ptr)
{
kvfree(ptr);
}
/**
* pcpu_chunk_relocate - put chunk in the appropriate chunk slot
* @chunk: chunk of interest
* @oslot: the previous slot it was on
*
* This function is called after an allocation or free changed @chunk.
* New slot according to the changed state is determined and @chunk is
* moved to the slot. Note that the reserved chunk is never put on
* chunk slots.
*
* CONTEXT:
* pcpu_lock.
*/
static void pcpu_chunk_relocate(struct pcpu_chunk *chunk, int oslot)
{
int nslot = pcpu_chunk_slot(chunk);
if (chunk != pcpu_reserved_chunk && oslot != nslot) {
if (oslot < nslot)
list_move(&chunk->list, &pcpu_slot[nslot]);
else
list_move_tail(&chunk->list, &pcpu_slot[nslot]);
}
}
/**
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* pcpu_cnt_pop_pages- counts populated backing pages in range
* @chunk: chunk of interest
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* @bit_off: start offset
* @bits: size of area to check
*
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* Calculates the number of populated pages in the region
* [page_start, page_end). This keeps track of how many empty populated
* pages are available and decide if async work should be scheduled.
*
* RETURNS:
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* The nr of populated pages.
*/
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
static inline int pcpu_cnt_pop_pages(struct pcpu_chunk *chunk, int bit_off,
int bits)
{
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
int page_start = PFN_UP(bit_off * PCPU_MIN_ALLOC_SIZE);
int page_end = PFN_DOWN((bit_off + bits) * PCPU_MIN_ALLOC_SIZE);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
if (page_start >= page_end)
return 0;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/*
* bitmap_weight counts the number of bits set in a bitmap up to
* the specified number of bits. This is counting the populated
* pages up to page_end and then subtracting the populated pages
* up to page_start to count the populated pages in
* [page_start, page_end).
*/
return bitmap_weight(chunk->populated, page_end) -
bitmap_weight(chunk->populated, page_start);
}
/**
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* pcpu_chunk_update - updates the chunk metadata given a free area
* @chunk: chunk of interest
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* @bit_off: chunk offset
* @bits: size of free area
*
* This updates the chunk's contig hint and starting offset given a free area.
* Choose the best starting offset if the contig hint is equal.
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
*/
static void pcpu_chunk_update(struct pcpu_chunk *chunk, int bit_off, int bits)
{
if (bits > chunk->contig_bits) {
chunk->contig_bits_start = bit_off;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk->contig_bits = bits;
} else if (bits == chunk->contig_bits && chunk->contig_bits_start &&
(!bit_off ||
__ffs(bit_off) > __ffs(chunk->contig_bits_start))) {
/* use the start with the best alignment */
chunk->contig_bits_start = bit_off;
}
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
}
/**
* pcpu_chunk_refresh_hint - updates metadata about a chunk
* @chunk: chunk of interest
*
* Iterates over the metadata blocks to find the largest contig area.
* It also counts the populated pages and uses the delta to update the
* global count.
*
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* Updates:
* chunk->contig_bits
* chunk->contig_bits_start
* nr_empty_pop_pages (chunk and global)
*/
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
static void pcpu_chunk_refresh_hint(struct pcpu_chunk *chunk)
{
int bit_off, bits, nr_empty_pop_pages;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/* clear metadata */
chunk->contig_bits = 0;
bit_off = chunk->first_bit;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
bits = nr_empty_pop_pages = 0;
pcpu_for_each_md_free_region(chunk, bit_off, bits) {
pcpu_chunk_update(chunk, bit_off, bits);
nr_empty_pop_pages += pcpu_cnt_pop_pages(chunk, bit_off, bits);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
}
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/*
* Keep track of nr_empty_pop_pages.
*
* The chunk maintains the previous number of free pages it held,
* so the delta is used to update the global counter. The reserved
* chunk is not part of the free page count as they are populated
* at init and are special to serving reserved allocations.
*/
if (chunk != pcpu_reserved_chunk)
pcpu_nr_empty_pop_pages +=
(nr_empty_pop_pages - chunk->nr_empty_pop_pages);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk->nr_empty_pop_pages = nr_empty_pop_pages;
}
/**
* pcpu_block_update - updates a block given a free area
* @block: block of interest
* @start: start offset in block
* @end: end offset in block
*
* Updates a block given a known free area. The region [start, end) is
* expected to be the entirety of the free area within a block. Chooses
* the best starting offset if the contig hints are equal.
*/
static void pcpu_block_update(struct pcpu_block_md *block, int start, int end)
{
int contig = end - start;
block->first_free = min(block->first_free, start);
if (start == 0)
block->left_free = contig;
if (end == PCPU_BITMAP_BLOCK_BITS)
block->right_free = contig;
if (contig > block->contig_hint) {
block->contig_hint_start = start;
block->contig_hint = contig;
} else if (block->contig_hint_start && contig == block->contig_hint &&
(!start || __ffs(start) > __ffs(block->contig_hint_start))) {
/* use the start with the best alignment */
block->contig_hint_start = start;
}
}
/**
* pcpu_block_refresh_hint
* @chunk: chunk of interest
* @index: index of the metadata block
*
* Scans over the block beginning at first_free and updates the block
* metadata accordingly.
*/
static void pcpu_block_refresh_hint(struct pcpu_chunk *chunk, int index)
{
struct pcpu_block_md *block = chunk->md_blocks + index;
unsigned long *alloc_map = pcpu_index_alloc_map(chunk, index);
int rs, re; /* region start, region end */
/* clear hints */
block->contig_hint = 0;
block->left_free = block->right_free = 0;
/* iterate over free areas and update the contig hints */
pcpu_for_each_unpop_region(alloc_map, rs, re, block->first_free,
PCPU_BITMAP_BLOCK_BITS) {
pcpu_block_update(block, rs, re);
}
}
/**
* pcpu_block_update_hint_alloc - update hint on allocation path
* @chunk: chunk of interest
* @bit_off: chunk offset
* @bits: size of request
*
* Updates metadata for the allocation path. The metadata only has to be
* refreshed by a full scan iff the chunk's contig hint is broken. Block level
* scans are required if the block's contig hint is broken.
*/
static void pcpu_block_update_hint_alloc(struct pcpu_chunk *chunk, int bit_off,
int bits)
{
struct pcpu_block_md *s_block, *e_block, *block;
int s_index, e_index; /* block indexes of the freed allocation */
int s_off, e_off; /* block offsets of the freed allocation */
/*
* Calculate per block offsets.
* The calculation uses an inclusive range, but the resulting offsets
* are [start, end). e_index always points to the last block in the
* range.
*/
s_index = pcpu_off_to_block_index(bit_off);
e_index = pcpu_off_to_block_index(bit_off + bits - 1);
s_off = pcpu_off_to_block_off(bit_off);
e_off = pcpu_off_to_block_off(bit_off + bits - 1) + 1;
s_block = chunk->md_blocks + s_index;
e_block = chunk->md_blocks + e_index;
/*
* Update s_block.
* block->first_free must be updated if the allocation takes its place.
* If the allocation breaks the contig_hint, a scan is required to
* restore this hint.
*/
if (s_off == s_block->first_free)
s_block->first_free = find_next_zero_bit(
pcpu_index_alloc_map(chunk, s_index),
PCPU_BITMAP_BLOCK_BITS,
s_off + bits);
if (s_off >= s_block->contig_hint_start &&
s_off < s_block->contig_hint_start + s_block->contig_hint) {
/* block contig hint is broken - scan to fix it */
pcpu_block_refresh_hint(chunk, s_index);
} else {
/* update left and right contig manually */
s_block->left_free = min(s_block->left_free, s_off);
if (s_index == e_index)
s_block->right_free = min_t(int, s_block->right_free,
PCPU_BITMAP_BLOCK_BITS - e_off);
else
s_block->right_free = 0;
}
/*
* Update e_block.
*/
if (s_index != e_index) {
/*
* When the allocation is across blocks, the end is along
* the left part of the e_block.
*/
e_block->first_free = find_next_zero_bit(
pcpu_index_alloc_map(chunk, e_index),
PCPU_BITMAP_BLOCK_BITS, e_off);
if (e_off == PCPU_BITMAP_BLOCK_BITS) {
/* reset the block */
e_block++;
} else {
if (e_off > e_block->contig_hint_start) {
/* contig hint is broken - scan to fix it */
pcpu_block_refresh_hint(chunk, e_index);
} else {
e_block->left_free = 0;
e_block->right_free =
min_t(int, e_block->right_free,
PCPU_BITMAP_BLOCK_BITS - e_off);
}
}
/* update in-between md_blocks */
for (block = s_block + 1; block < e_block; block++) {
block->contig_hint = 0;
block->left_free = 0;
block->right_free = 0;
}
}
/*
* The only time a full chunk scan is required is if the chunk
* contig hint is broken. Otherwise, it means a smaller space
* was used and therefore the chunk contig hint is still correct.
*/
if (bit_off >= chunk->contig_bits_start &&
bit_off < chunk->contig_bits_start + chunk->contig_bits)
pcpu_chunk_refresh_hint(chunk);
}
/**
* pcpu_block_update_hint_free - updates the block hints on the free path
* @chunk: chunk of interest
* @bit_off: chunk offset
* @bits: size of request
*
* Updates metadata for the allocation path. This avoids a blind block
* refresh by making use of the block contig hints. If this fails, it scans
* forward and backward to determine the extent of the free area. This is
* capped at the boundary of blocks.
*
* A chunk update is triggered if a page becomes free, a block becomes free,
* or the free spans across blocks. This tradeoff is to minimize iterating
* over the block metadata to update chunk->contig_bits. chunk->contig_bits
* may be off by up to a page, but it will never be more than the available
* space. If the contig hint is contained in one block, it will be accurate.
*/
static void pcpu_block_update_hint_free(struct pcpu_chunk *chunk, int bit_off,
int bits)
{
struct pcpu_block_md *s_block, *e_block, *block;
int s_index, e_index; /* block indexes of the freed allocation */
int s_off, e_off; /* block offsets of the freed allocation */
int start, end; /* start and end of the whole free area */
/*
* Calculate per block offsets.
* The calculation uses an inclusive range, but the resulting offsets
* are [start, end). e_index always points to the last block in the
* range.
*/
s_index = pcpu_off_to_block_index(bit_off);
e_index = pcpu_off_to_block_index(bit_off + bits - 1);
s_off = pcpu_off_to_block_off(bit_off);
e_off = pcpu_off_to_block_off(bit_off + bits - 1) + 1;
s_block = chunk->md_blocks + s_index;
e_block = chunk->md_blocks + e_index;
/*
* Check if the freed area aligns with the block->contig_hint.
* If it does, then the scan to find the beginning/end of the
* larger free area can be avoided.
*
* start and end refer to beginning and end of the free area
* within each their respective blocks. This is not necessarily
* the entire free area as it may span blocks past the beginning
* or end of the block.
*/
start = s_off;
if (s_off == s_block->contig_hint + s_block->contig_hint_start) {
start = s_block->contig_hint_start;
} else {
/*
* Scan backwards to find the extent of the free area.
* find_last_bit returns the starting bit, so if the start bit
* is returned, that means there was no last bit and the
* remainder of the chunk is free.
*/
int l_bit = find_last_bit(pcpu_index_alloc_map(chunk, s_index),
start);
start = (start == l_bit) ? 0 : l_bit + 1;
}
end = e_off;
if (e_off == e_block->contig_hint_start)
end = e_block->contig_hint_start + e_block->contig_hint;
else
end = find_next_bit(pcpu_index_alloc_map(chunk, e_index),
PCPU_BITMAP_BLOCK_BITS, end);
/* update s_block */
e_off = (s_index == e_index) ? end : PCPU_BITMAP_BLOCK_BITS;
pcpu_block_update(s_block, start, e_off);
/* freeing in the same block */
if (s_index != e_index) {
/* update e_block */
pcpu_block_update(e_block, 0, end);
/* reset md_blocks in the middle */
for (block = s_block + 1; block < e_block; block++) {
block->first_free = 0;
block->contig_hint_start = 0;
block->contig_hint = PCPU_BITMAP_BLOCK_BITS;
block->left_free = PCPU_BITMAP_BLOCK_BITS;
block->right_free = PCPU_BITMAP_BLOCK_BITS;
}
}
/*
* Refresh chunk metadata when the free makes a page free, a block
* free, or spans across blocks. The contig hint may be off by up to
* a page, but if the hint is contained in a block, it will be accurate
* with the else condition below.
*/
if ((ALIGN_DOWN(end, min(PCPU_BITS_PER_PAGE, PCPU_BITMAP_BLOCK_BITS)) >
ALIGN(start, min(PCPU_BITS_PER_PAGE, PCPU_BITMAP_BLOCK_BITS))) ||
s_index != e_index)
pcpu_chunk_refresh_hint(chunk);
else
pcpu_chunk_update(chunk, pcpu_block_off_to_off(s_index, start),
s_block->contig_hint);
}
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/**
* pcpu_is_populated - determines if the region is populated
* @chunk: chunk of interest
* @bit_off: chunk offset
* @bits: size of area
* @next_off: return value for the next offset to start searching
*
* For atomic allocations, check if the backing pages are populated.
*
* RETURNS:
* Bool if the backing pages are populated.
* next_index is to skip over unpopulated blocks in pcpu_find_block_fit.
*/
static bool pcpu_is_populated(struct pcpu_chunk *chunk, int bit_off, int bits,
int *next_off)
{
int page_start, page_end, rs, re;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
page_start = PFN_DOWN(bit_off * PCPU_MIN_ALLOC_SIZE);
page_end = PFN_UP((bit_off + bits) * PCPU_MIN_ALLOC_SIZE);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
rs = page_start;
pcpu_next_unpop(chunk->populated, &rs, &re, page_end);
if (rs >= page_end)
return true;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
*next_off = re * PAGE_SIZE / PCPU_MIN_ALLOC_SIZE;
return false;
}
/**
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* pcpu_find_block_fit - finds the block index to start searching
* @chunk: chunk of interest
* @alloc_bits: size of request in allocation units
* @align: alignment of area (max PAGE_SIZE bytes)
* @pop_only: use populated regions only
*
* Given a chunk and an allocation spec, find the offset to begin searching
* for a free region. This iterates over the bitmap metadata blocks to
* find an offset that will be guaranteed to fit the requirements. It is
* not quite first fit as if the allocation does not fit in the contig hint
* of a block or chunk, it is skipped. This errs on the side of caution
* to prevent excess iteration. Poor alignment can cause the allocator to
* skip over blocks and chunks that have valid free areas.
*
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* RETURNS:
* The offset in the bitmap to begin searching.
* -1 if no offset is found.
*/
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
static int pcpu_find_block_fit(struct pcpu_chunk *chunk, int alloc_bits,
size_t align, bool pop_only)
{
int bit_off, bits, next_off;
/*
* Check to see if the allocation can fit in the chunk's contig hint.
* This is an optimization to prevent scanning by assuming if it
* cannot fit in the global hint, there is memory pressure and creating
* a new chunk would happen soon.
*/
bit_off = ALIGN(chunk->contig_bits_start, align) -
chunk->contig_bits_start;
if (bit_off + alloc_bits > chunk->contig_bits)
return -1;
bit_off = chunk->first_bit;
bits = 0;
pcpu_for_each_fit_region(chunk, alloc_bits, align, bit_off, bits) {
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
if (!pop_only || pcpu_is_populated(chunk, bit_off, bits,
&next_off))
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
break;
bit_off = next_off;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
bits = 0;
}
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
if (bit_off == pcpu_chunk_map_bits(chunk))
return -1;
return bit_off;
}
/**
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* pcpu_alloc_area - allocates an area from a pcpu_chunk
* @chunk: chunk of interest
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* @alloc_bits: size of request in allocation units
* @align: alignment of area (max PAGE_SIZE)
* @start: bit_off to start searching
*
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* This function takes in a @start offset to begin searching to fit an
* allocation of @alloc_bits with alignment @align. It needs to scan
* the allocation map because if it fits within the block's contig hint,
* @start will be block->first_free. This is an attempt to fill the
* allocation prior to breaking the contig hint. The allocation and
* boundary maps are updated accordingly if it confirms a valid
* free area.
*
* RETURNS:
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* Allocated addr offset in @chunk on success.
* -1 if no matching area is found.
*/
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
static int pcpu_alloc_area(struct pcpu_chunk *chunk, int alloc_bits,
size_t align, int start)
{
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
size_t align_mask = (align) ? (align - 1) : 0;
int bit_off, end, oslot;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
lockdep_assert_held(&pcpu_lock);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
oslot = pcpu_chunk_slot(chunk);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/*
* Search to find a fit.
*/
end = start + alloc_bits + PCPU_BITMAP_BLOCK_BITS;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
bit_off = bitmap_find_next_zero_area(chunk->alloc_map, end, start,
alloc_bits, align_mask);
if (bit_off >= end)
return -1;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/* update alloc map */
bitmap_set(chunk->alloc_map, bit_off, alloc_bits);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/* update boundary map */
set_bit(bit_off, chunk->bound_map);
bitmap_clear(chunk->bound_map, bit_off + 1, alloc_bits - 1);
set_bit(bit_off + alloc_bits, chunk->bound_map);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk->free_bytes -= alloc_bits * PCPU_MIN_ALLOC_SIZE;
/* update first free bit */
if (bit_off == chunk->first_bit)
chunk->first_bit = find_next_zero_bit(
chunk->alloc_map,
pcpu_chunk_map_bits(chunk),
bit_off + alloc_bits);
pcpu_block_update_hint_alloc(chunk, bit_off, alloc_bits);
pcpu_chunk_relocate(chunk, oslot);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
return bit_off * PCPU_MIN_ALLOC_SIZE;
}
/**
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* pcpu_free_area - frees the corresponding offset
* @chunk: chunk of interest
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* @off: addr offset into chunk
*
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* This function determines the size of an allocation to free using
* the boundary bitmap and clears the allocation map.
*/
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
static void pcpu_free_area(struct pcpu_chunk *chunk, int off)
{
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
int bit_off, bits, end, oslot;
percpu: store offsets instead of lengths in ->map[] Current code keeps +-length for each area in chunk->map[]. It has several unpleasant consequences: * even if we know that first 50 areas are all in use, allocation still needs to go through all those areas just to sum their sizes, just to get the offset of free one. * freeing needs to find the array entry refering to the area in question; again, the need to sum the sizes until we reach the offset we are interested in. Note that offsets are monotonous, so simple binary search would do here. New data representation: array of <offset,in-use flag> pairs. Each pair is represented by one int - we use offset|1 for <offset, in use> and offset for <offset, free> (we make sure that all offsets are even). In the end we put a sentry entry - <total size, in use>. The first entry is <0, flag>; it would be possible to store together the flag for Nth area and offset for N+1st, but that leads to much hairier code. In other words, where the old variant would have 4, -8, -4, 4, -12, 100 (4 bytes free, 8 in use, 4 in use, 4 free, 12 in use, 100 free) we store <0,0>, <4,1>, <12,1>, <16,0>, <20,1>, <32,0>, <132,1> i.e. 0, 5, 13, 16, 21, 32, 133 This commit switches to new data representation and takes care of a couple of low-hanging fruits in free_pcpu_area() - one is the switch to binary search, another is not doing two memmove() when one would do. Speeding the alloc side up (by keeping track of how many areas in the beginning are known to be all in use) also becomes possible - that'll be done in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-07 10:13:18 +08:00
lockdep_assert_held(&pcpu_lock);
pcpu_stats_area_dealloc(chunk);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
oslot = pcpu_chunk_slot(chunk);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
bit_off = off / PCPU_MIN_ALLOC_SIZE;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/* find end index */
end = find_next_bit(chunk->bound_map, pcpu_chunk_map_bits(chunk),
bit_off + 1);
bits = end - bit_off;
bitmap_clear(chunk->alloc_map, bit_off, bits);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/* update metadata */
chunk->free_bytes += bits * PCPU_MIN_ALLOC_SIZE;
/* update first free bit */
chunk->first_bit = min(chunk->first_bit, bit_off);
pcpu_block_update_hint_free(chunk, bit_off, bits);
pcpu_chunk_relocate(chunk, oslot);
}
static void pcpu_init_md_blocks(struct pcpu_chunk *chunk)
{
struct pcpu_block_md *md_block;
for (md_block = chunk->md_blocks;
md_block != chunk->md_blocks + pcpu_chunk_nr_blocks(chunk);
md_block++) {
md_block->contig_hint = PCPU_BITMAP_BLOCK_BITS;
md_block->left_free = PCPU_BITMAP_BLOCK_BITS;
md_block->right_free = PCPU_BITMAP_BLOCK_BITS;
}
}
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/**
* pcpu_alloc_first_chunk - creates chunks that serve the first chunk
* @tmp_addr: the start of the region served
* @map_size: size of the region served
*
* This is responsible for creating the chunks that serve the first chunk. The
* base_addr is page aligned down of @tmp_addr while the region end is page
* aligned up. Offsets are kept track of to determine the region served. All
* this is done to appease the bitmap allocator in avoiding partial blocks.
*
* RETURNS:
* Chunk serving the region at @tmp_addr of @map_size.
*/
static struct pcpu_chunk * __init pcpu_alloc_first_chunk(unsigned long tmp_addr,
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
int map_size)
{
struct pcpu_chunk *chunk;
unsigned long aligned_addr, lcm_align;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
int start_offset, offset_bits, region_size, region_bits;
/* region calculations */
aligned_addr = tmp_addr & PAGE_MASK;
start_offset = tmp_addr - aligned_addr;
/*
* Align the end of the region with the LCM of PAGE_SIZE and
* PCPU_BITMAP_BLOCK_SIZE. One of these constants is a multiple of
* the other.
*/
lcm_align = lcm(PAGE_SIZE, PCPU_BITMAP_BLOCK_SIZE);
region_size = ALIGN(start_offset + map_size, lcm_align);
/* allocate chunk */
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:08:04 +08:00
chunk = memblock_alloc(sizeof(struct pcpu_chunk) +
memblock: stop using implicit alignment to SMP_CACHE_BYTES When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:57 +08:00
BITS_TO_LONGS(region_size >> PAGE_SHIFT),
SMP_CACHE_BYTES);
INIT_LIST_HEAD(&chunk->list);
chunk->base_addr = (void *)aligned_addr;
chunk->start_offset = start_offset;
chunk->end_offset = region_size - chunk->start_offset - map_size;
chunk->nr_pages = region_size >> PAGE_SHIFT;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
region_bits = pcpu_chunk_map_bits(chunk);
memblock: stop using implicit alignment to SMP_CACHE_BYTES When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:57 +08:00
chunk->alloc_map = memblock_alloc(BITS_TO_LONGS(region_bits) * sizeof(chunk->alloc_map[0]),
SMP_CACHE_BYTES);
chunk->bound_map = memblock_alloc(BITS_TO_LONGS(region_bits + 1) * sizeof(chunk->bound_map[0]),
SMP_CACHE_BYTES);
chunk->md_blocks = memblock_alloc(pcpu_chunk_nr_blocks(chunk) * sizeof(chunk->md_blocks[0]),
SMP_CACHE_BYTES);
pcpu_init_md_blocks(chunk);
/* manage populated page bitmap */
chunk->immutable = true;
bitmap_fill(chunk->populated, chunk->nr_pages);
chunk->nr_populated = chunk->nr_pages;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk->nr_empty_pop_pages =
pcpu_cnt_pop_pages(chunk, start_offset / PCPU_MIN_ALLOC_SIZE,
map_size / PCPU_MIN_ALLOC_SIZE);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk->contig_bits = map_size / PCPU_MIN_ALLOC_SIZE;
chunk->free_bytes = map_size;
if (chunk->start_offset) {
/* hide the beginning of the bitmap */
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
offset_bits = chunk->start_offset / PCPU_MIN_ALLOC_SIZE;
bitmap_set(chunk->alloc_map, 0, offset_bits);
set_bit(0, chunk->bound_map);
set_bit(offset_bits, chunk->bound_map);
chunk->first_bit = offset_bits;
pcpu_block_update_hint_alloc(chunk, 0, offset_bits);
}
if (chunk->end_offset) {
/* hide the end of the bitmap */
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
offset_bits = chunk->end_offset / PCPU_MIN_ALLOC_SIZE;
bitmap_set(chunk->alloc_map,
pcpu_chunk_map_bits(chunk) - offset_bits,
offset_bits);
set_bit((start_offset + map_size) / PCPU_MIN_ALLOC_SIZE,
chunk->bound_map);
set_bit(region_bits, chunk->bound_map);
pcpu_block_update_hint_alloc(chunk, pcpu_chunk_map_bits(chunk)
- offset_bits, offset_bits);
}
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
return chunk;
}
static struct pcpu_chunk *pcpu_alloc_chunk(gfp_t gfp)
{
struct pcpu_chunk *chunk;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
int region_bits;
chunk = pcpu_mem_zalloc(pcpu_chunk_struct_size, gfp);
if (!chunk)
return NULL;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
INIT_LIST_HEAD(&chunk->list);
chunk->nr_pages = pcpu_unit_pages;
region_bits = pcpu_chunk_map_bits(chunk);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk->alloc_map = pcpu_mem_zalloc(BITS_TO_LONGS(region_bits) *
sizeof(chunk->alloc_map[0]), gfp);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
if (!chunk->alloc_map)
goto alloc_map_fail;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk->bound_map = pcpu_mem_zalloc(BITS_TO_LONGS(region_bits + 1) *
sizeof(chunk->bound_map[0]), gfp);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
if (!chunk->bound_map)
goto bound_map_fail;
chunk->md_blocks = pcpu_mem_zalloc(pcpu_chunk_nr_blocks(chunk) *
sizeof(chunk->md_blocks[0]), gfp);
if (!chunk->md_blocks)
goto md_blocks_fail;
pcpu_init_md_blocks(chunk);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
/* init metadata */
chunk->contig_bits = region_bits;
chunk->free_bytes = chunk->nr_pages * PAGE_SIZE;
return chunk;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
md_blocks_fail:
pcpu_mem_free(chunk->bound_map);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
bound_map_fail:
pcpu_mem_free(chunk->alloc_map);
alloc_map_fail:
pcpu_mem_free(chunk);
return NULL;
}
static void pcpu_free_chunk(struct pcpu_chunk *chunk)
{
if (!chunk)
return;
pcpu_mem_free(chunk->md_blocks);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
pcpu_mem_free(chunk->bound_map);
pcpu_mem_free(chunk->alloc_map);
pcpu_mem_free(chunk);
}
/**
* pcpu_chunk_populated - post-population bookkeeping
* @chunk: pcpu_chunk which got populated
* @page_start: the start page
* @page_end: the end page
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* @for_alloc: if this is to populate for allocation
*
* Pages in [@page_start,@page_end) have been populated to @chunk. Update
* the bookkeeping information accordingly. Must be called after each
* successful population.
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
*
* If this is @for_alloc, do not increment pcpu_nr_empty_pop_pages because it
* is to serve an allocation in that area.
*/
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
static void pcpu_chunk_populated(struct pcpu_chunk *chunk, int page_start,
int page_end, bool for_alloc)
{
int nr = page_end - page_start;
lockdep_assert_held(&pcpu_lock);
bitmap_set(chunk->populated, page_start, nr);
chunk->nr_populated += nr;
/proc/meminfo: add percpu populated pages count Currently, percpu memory only exposes allocation and utilization information via debugfs. This more or less is only really useful for understanding the fragmentation and allocation information at a per-chunk level with a few global counters. This is also gated behind a config. BPF and cgroup, for example, have seen an increase in use causing increased use of percpu memory. Let's make it easier for someone to identify how much memory is being used. This patch adds the "Percpu" stat to meminfo to more easily look up how much percpu memory is in use. This number includes the cost for all allocated backing pages and not just insight at the per a unit, per chunk level. Metadata is excluded. I think excluding metadata is fair because the backing memory scales with the numbere of cpus and can quickly outweigh the metadata. It also makes this calculation light. Link: http://lkml.kernel.org/r/20180807184723.74919-1-dennisszhou@gmail.com Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 12:53:58 +08:00
pcpu_nr_populated += nr;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
if (!for_alloc) {
chunk->nr_empty_pop_pages += nr;
pcpu_nr_empty_pop_pages += nr;
}
}
/**
* pcpu_chunk_depopulated - post-depopulation bookkeeping
* @chunk: pcpu_chunk which got depopulated
* @page_start: the start page
* @page_end: the end page
*
* Pages in [@page_start,@page_end) have been depopulated from @chunk.
* Update the bookkeeping information accordingly. Must be called after
* each successful depopulation.
*/
static void pcpu_chunk_depopulated(struct pcpu_chunk *chunk,
int page_start, int page_end)
{
int nr = page_end - page_start;
lockdep_assert_held(&pcpu_lock);
bitmap_clear(chunk->populated, page_start, nr);
chunk->nr_populated -= nr;
chunk->nr_empty_pop_pages -= nr;
pcpu_nr_empty_pop_pages -= nr;
/proc/meminfo: add percpu populated pages count Currently, percpu memory only exposes allocation and utilization information via debugfs. This more or less is only really useful for understanding the fragmentation and allocation information at a per-chunk level with a few global counters. This is also gated behind a config. BPF and cgroup, for example, have seen an increase in use causing increased use of percpu memory. Let's make it easier for someone to identify how much memory is being used. This patch adds the "Percpu" stat to meminfo to more easily look up how much percpu memory is in use. This number includes the cost for all allocated backing pages and not just insight at the per a unit, per chunk level. Metadata is excluded. I think excluding metadata is fair because the backing memory scales with the numbere of cpus and can quickly outweigh the metadata. It also makes this calculation light. Link: http://lkml.kernel.org/r/20180807184723.74919-1-dennisszhou@gmail.com Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 12:53:58 +08:00
pcpu_nr_populated -= nr;
}
/*
* Chunk management implementation.
*
* To allow different implementations, chunk alloc/free and
* [de]population are implemented in a separate file which is pulled
* into this file and compiled together. The following functions
* should be implemented.
*
* pcpu_populate_chunk - populate the specified range of a chunk
* pcpu_depopulate_chunk - depopulate the specified range of a chunk
* pcpu_create_chunk - create a new chunk
* pcpu_destroy_chunk - destroy a chunk, always preceded by full depop
* pcpu_addr_to_page - translate address to physical address
* pcpu_verify_alloc_info - check alloc_info is acceptable during init
*/
static int pcpu_populate_chunk(struct pcpu_chunk *chunk,
int page_start, int page_end, gfp_t gfp);
static void pcpu_depopulate_chunk(struct pcpu_chunk *chunk,
int page_start, int page_end);
static struct pcpu_chunk *pcpu_create_chunk(gfp_t gfp);
static void pcpu_destroy_chunk(struct pcpu_chunk *chunk);
static struct page *pcpu_addr_to_page(void *addr);
static int __init pcpu_verify_alloc_info(const struct pcpu_alloc_info *ai);
#ifdef CONFIG_NEED_PER_CPU_KM
#include "percpu-km.c"
#else
#include "percpu-vm.c"
#endif
/**
* pcpu_chunk_addr_search - determine chunk containing specified address
* @addr: address for which the chunk needs to be determined.
*
* This is an internal function that handles all but static allocations.
* Static percpu address values should never be passed into the allocator.
*
* RETURNS:
* The address of the found chunk.
*/
static struct pcpu_chunk *pcpu_chunk_addr_search(void *addr)
{
/* is it in the dynamic region (first chunk)? */
if (pcpu_addr_in_chunk(pcpu_first_chunk, addr))
return pcpu_first_chunk;
/* is it in the reserved region? */
if (pcpu_addr_in_chunk(pcpu_reserved_chunk, addr))
return pcpu_reserved_chunk;
/*
* The address is relative to unit0 which might be unused and
* thus unmapped. Offset the address to the unit space of the
* current processor before looking it up in the vmalloc
* space. Note that any possible cpu id can be used here, so
* there's no need to worry about preemption or cpu hotplug.
*/
addr += pcpu_unit_offsets[raw_smp_processor_id()];
return pcpu_get_page_chunk(pcpu_addr_to_page(addr));
}
/**
* pcpu_alloc - the percpu allocator
* @size: size of area to allocate in bytes
* @align: alignment of area (max PAGE_SIZE)
* @reserved: allocate from the reserved chunk if available
* @gfp: allocation flags
*
* Allocate percpu area of @size bytes aligned at @align. If @gfp doesn't
mm, percpu: add support for __GFP_NOWARN flag Add an option for pcpu_alloc() to support __GFP_NOWARN flag. Currently, we always throw a warning when size or alignment is unsupported (and also dump stack on failed allocation requests). The warning itself is harmless since we return NULL anyway for any failed request, which callers are required to handle anyway. However, it becomes harmful when panic_on_warn is set. The rationale for the WARN() in pcpu_alloc() is that it can be tracked when larger than supported allocation requests are made such that allocations limits can be tweaked if warranted. This makes sense for in-kernel users, however, there are users of pcpu allocator where allocation size is derived from user space requests, e.g. when creating BPF maps. In these cases, the requests should fail gracefully without throwing a splat. The current work-around was to check allocation size against the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for bailing out prior to a call to pcpu_alloc() in order to avoid throwing the WARN(). This is bad in multiple ways since PCPU_MIN_UNIT_SIZE is an implementation detail, and having the checks on call-sites only complicates the code for no good reason. Thus, lets fix it generically by supporting the __GFP_NOWARN flag that users can then use with calling the __alloc_percpu_gfp() helper instead. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-17 22:55:52 +08:00
* contain %GFP_KERNEL, the allocation is atomic. If @gfp has __GFP_NOWARN
* then no warning will be triggered on invalid or failed allocation
* requests.
*
* RETURNS:
* Percpu pointer to the allocated area on success, NULL on failure.
*/
static void __percpu *pcpu_alloc(size_t size, size_t align, bool reserved,
gfp_t gfp)
{
/* whitelisted flags that can be passed to the backing allocators */
gfp_t pcpu_gfp = gfp & (GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN);
mm, percpu: add support for __GFP_NOWARN flag Add an option for pcpu_alloc() to support __GFP_NOWARN flag. Currently, we always throw a warning when size or alignment is unsupported (and also dump stack on failed allocation requests). The warning itself is harmless since we return NULL anyway for any failed request, which callers are required to handle anyway. However, it becomes harmful when panic_on_warn is set. The rationale for the WARN() in pcpu_alloc() is that it can be tracked when larger than supported allocation requests are made such that allocations limits can be tweaked if warranted. This makes sense for in-kernel users, however, there are users of pcpu allocator where allocation size is derived from user space requests, e.g. when creating BPF maps. In these cases, the requests should fail gracefully without throwing a splat. The current work-around was to check allocation size against the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for bailing out prior to a call to pcpu_alloc() in order to avoid throwing the WARN(). This is bad in multiple ways since PCPU_MIN_UNIT_SIZE is an implementation detail, and having the checks on call-sites only complicates the code for no good reason. Thus, lets fix it generically by supporting the __GFP_NOWARN flag that users can then use with calling the __alloc_percpu_gfp() helper instead. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-17 22:55:52 +08:00
bool is_atomic = (gfp & GFP_KERNEL) != GFP_KERNEL;
bool do_warn = !(gfp & __GFP_NOWARN);
static int warn_limit = 10;
struct pcpu_chunk *chunk;
const char *err;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
int slot, off, cpu, ret;
unsigned long flags;
void __percpu *ptr;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
size_t bits, bit_align;
percpu: store offsets instead of lengths in ->map[] Current code keeps +-length for each area in chunk->map[]. It has several unpleasant consequences: * even if we know that first 50 areas are all in use, allocation still needs to go through all those areas just to sum their sizes, just to get the offset of free one. * freeing needs to find the array entry refering to the area in question; again, the need to sum the sizes until we reach the offset we are interested in. Note that offsets are monotonous, so simple binary search would do here. New data representation: array of <offset,in-use flag> pairs. Each pair is represented by one int - we use offset|1 for <offset, in use> and offset for <offset, free> (we make sure that all offsets are even). In the end we put a sentry entry - <total size, in use>. The first entry is <0, flag>; it would be possible to store together the flag for Nth area and offset for N+1st, but that leads to much hairier code. In other words, where the old variant would have 4, -8, -4, 4, -12, 100 (4 bytes free, 8 in use, 4 in use, 4 free, 12 in use, 100 free) we store <0,0>, <4,1>, <12,1>, <16,0>, <20,1>, <32,0>, <132,1> i.e. 0, 5, 13, 16, 21, 32, 133 This commit switches to new data representation and takes care of a couple of low-hanging fruits in free_pcpu_area() - one is the switch to binary search, another is not doing two memmove() when one would do. Speeding the alloc side up (by keeping track of how many areas in the beginning are known to be all in use) also becomes possible - that'll be done in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-07 10:13:18 +08:00
/*
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
* There is now a minimum allocation size of PCPU_MIN_ALLOC_SIZE,
* therefore alignment must be a minimum of that many bytes.
* An allocation may have internal fragmentation from rounding up
* of up to PCPU_MIN_ALLOC_SIZE - 1 bytes.
percpu: store offsets instead of lengths in ->map[] Current code keeps +-length for each area in chunk->map[]. It has several unpleasant consequences: * even if we know that first 50 areas are all in use, allocation still needs to go through all those areas just to sum their sizes, just to get the offset of free one. * freeing needs to find the array entry refering to the area in question; again, the need to sum the sizes until we reach the offset we are interested in. Note that offsets are monotonous, so simple binary search would do here. New data representation: array of <offset,in-use flag> pairs. Each pair is represented by one int - we use offset|1 for <offset, in use> and offset for <offset, free> (we make sure that all offsets are even). In the end we put a sentry entry - <total size, in use>. The first entry is <0, flag>; it would be possible to store together the flag for Nth area and offset for N+1st, but that leads to much hairier code. In other words, where the old variant would have 4, -8, -4, 4, -12, 100 (4 bytes free, 8 in use, 4 in use, 4 free, 12 in use, 100 free) we store <0,0>, <4,1>, <12,1>, <16,0>, <20,1>, <32,0>, <132,1> i.e. 0, 5, 13, 16, 21, 32, 133 This commit switches to new data representation and takes care of a couple of low-hanging fruits in free_pcpu_area() - one is the switch to binary search, another is not doing two memmove() when one would do. Speeding the alloc side up (by keeping track of how many areas in the beginning are known to be all in use) also becomes possible - that'll be done in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-07 10:13:18 +08:00
*/
if (unlikely(align < PCPU_MIN_ALLOC_SIZE))
align = PCPU_MIN_ALLOC_SIZE;
percpu: store offsets instead of lengths in ->map[] Current code keeps +-length for each area in chunk->map[]. It has several unpleasant consequences: * even if we know that first 50 areas are all in use, allocation still needs to go through all those areas just to sum their sizes, just to get the offset of free one. * freeing needs to find the array entry refering to the area in question; again, the need to sum the sizes until we reach the offset we are interested in. Note that offsets are monotonous, so simple binary search would do here. New data representation: array of <offset,in-use flag> pairs. Each pair is represented by one int - we use offset|1 for <offset, in use> and offset for <offset, free> (we make sure that all offsets are even). In the end we put a sentry entry - <total size, in use>. The first entry is <0, flag>; it would be possible to store together the flag for Nth area and offset for N+1st, but that leads to much hairier code. In other words, where the old variant would have 4, -8, -4, 4, -12, 100 (4 bytes free, 8 in use, 4 in use, 4 free, 12 in use, 100 free) we store <0,0>, <4,1>, <12,1>, <16,0>, <20,1>, <32,0>, <132,1> i.e. 0, 5, 13, 16, 21, 32, 133 This commit switches to new data representation and takes care of a couple of low-hanging fruits in free_pcpu_area() - one is the switch to binary search, another is not doing two memmove() when one would do. Speeding the alloc side up (by keeping track of how many areas in the beginning are known to be all in use) also becomes possible - that'll be done in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-07 10:13:18 +08:00
size = ALIGN(size, PCPU_MIN_ALLOC_SIZE);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
bits = size >> PCPU_MIN_ALLOC_SHIFT;
bit_align = align >> PCPU_MIN_ALLOC_SHIFT;
percpu: ensure the requested alignment is power of two The percpu allocator expectedly assumes that the requested alignment is power of two but hasn't been veryfing the input. If the specified alignment isn't power of two, the allocator can malfunction. Add the sanity check. The following is detailed analysis of the effects of alignments which aren't power of two. The alignment must be a even at least since the LSB of a chunk->map element is used as free/in-use flag of a area; besides, the alignment must be a power of 2 too since ALIGN() doesn't work well for other alignment always but is adopted by pcpu_fit_in_area(). IOW, the current allocator only works well for a power of 2 aligned area allocation. See below opposite example for why an odd alignment doesn't work. Let's assume area [16, 36) is free but its previous one is in-use, we want to allocate a @size == 8 and @align == 7 area. The larger area [16, 36) is split to three areas [16, 21), [21, 29), [29, 36) eventually. However, due to the usage for a chunk->map element, the actual offset of the aim area [21, 29) is 21 but is recorded in relevant element as 20; moreover, the residual tail free area [29, 36) is mistook as in-use and is lost silently Unlike macro roundup(), ALIGN(x, a) doesn't work if @a isn't a power of 2 for example, roundup(10, 6) == 12 but ALIGN(10, 6) == 10, and the latter result isn't desired obviously. tj: Code style and patch description updates. Signed-off-by: zijun_hu <zijun_hu@htc.com> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-10-14 15:12:54 +08:00
if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE ||
!is_power_of_2(align))) {
mm, percpu: add support for __GFP_NOWARN flag Add an option for pcpu_alloc() to support __GFP_NOWARN flag. Currently, we always throw a warning when size or alignment is unsupported (and also dump stack on failed allocation requests). The warning itself is harmless since we return NULL anyway for any failed request, which callers are required to handle anyway. However, it becomes harmful when panic_on_warn is set. The rationale for the WARN() in pcpu_alloc() is that it can be tracked when larger than supported allocation requests are made such that allocations limits can be tweaked if warranted. This makes sense for in-kernel users, however, there are users of pcpu allocator where allocation size is derived from user space requests, e.g. when creating BPF maps. In these cases, the requests should fail gracefully without throwing a splat. The current work-around was to check allocation size against the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for bailing out prior to a call to pcpu_alloc() in order to avoid throwing the WARN(). This is bad in multiple ways since PCPU_MIN_UNIT_SIZE is an implementation detail, and having the checks on call-sites only complicates the code for no good reason. Thus, lets fix it generically by supporting the __GFP_NOWARN flag that users can then use with calling the __alloc_percpu_gfp() helper instead. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-17 22:55:52 +08:00
WARN(do_warn, "illegal size (%zu) or align (%zu) for percpu allocation\n",
size, align);
return NULL;
}
if (!is_atomic) {
/*
* pcpu_balance_workfn() allocates memory under this mutex,
* and it may wait for memory reclaim. Allow current task
* to become OOM victim, in case of memory pressure.
*/
if (gfp & __GFP_NOFAIL)
mutex_lock(&pcpu_alloc_mutex);
else if (mutex_lock_killable(&pcpu_alloc_mutex))
return NULL;
}
spin_lock_irqsave(&pcpu_lock, flags);
/* serve reserved allocations from the reserved chunk if available */
if (reserved && pcpu_reserved_chunk) {
chunk = pcpu_reserved_chunk;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
off = pcpu_find_block_fit(chunk, bits, bit_align, is_atomic);
if (off < 0) {
err = "alloc from reserved chunk failed";
goto fail_unlock;
}
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
off = pcpu_alloc_area(chunk, bits, bit_align, off);
if (off >= 0)
goto area_found;
err = "alloc from reserved chunk failed";
goto fail_unlock;
}
restart:
/* search through normal chunks */
for (slot = pcpu_size_to_slot(size); slot < pcpu_nr_slots; slot++) {
list_for_each_entry(chunk, &pcpu_slot[slot], list) {
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
off = pcpu_find_block_fit(chunk, bits, bit_align,
is_atomic);
if (off < 0)
continue;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
off = pcpu_alloc_area(chunk, bits, bit_align, off);
if (off >= 0)
goto area_found;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
}
}
spin_unlock_irqrestore(&pcpu_lock, flags);
/*
* No space left. Create a new chunk. We don't want multiple
* tasks to create chunks simultaneously. Serialize and create iff
* there's still no empty chunk after grabbing the mutex.
*/
if (is_atomic) {
err = "atomic alloc failed, no space left";
goto fail;
}
if (list_empty(&pcpu_slot[pcpu_nr_slots - 1])) {
chunk = pcpu_create_chunk(pcpu_gfp);
if (!chunk) {
err = "failed to allocate new chunk";
goto fail;
}
spin_lock_irqsave(&pcpu_lock, flags);
pcpu_chunk_relocate(chunk, -1);
} else {
spin_lock_irqsave(&pcpu_lock, flags);
}
goto restart;
area_found:
pcpu_stats_area_alloc(chunk, size);
spin_unlock_irqrestore(&pcpu_lock, flags);
/* populate if not all pages are already there */
if (!is_atomic) {
int page_start, page_end, rs, re;
page_start = PFN_DOWN(off);
page_end = PFN_UP(off + size);
pcpu_for_each_unpop_region(chunk->populated, rs, re,
page_start, page_end) {
WARN_ON(chunk->immutable);
ret = pcpu_populate_chunk(chunk, rs, re, pcpu_gfp);
spin_lock_irqsave(&pcpu_lock, flags);
if (ret) {
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
pcpu_free_area(chunk, off);
err = "failed to populate";
goto fail_unlock;
}
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
pcpu_chunk_populated(chunk, rs, re, true);
spin_unlock_irqrestore(&pcpu_lock, flags);
}
mutex_unlock(&pcpu_alloc_mutex);
}
if (pcpu_nr_empty_pop_pages < PCPU_EMPTY_POP_PAGES_LOW)
pcpu_schedule_balance_work();
/* clear the areas and return address relative to base address */
for_each_possible_cpu(cpu)
memset((void *)pcpu_chunk_addr(chunk, cpu, 0) + off, 0, size);
ptr = __addr_to_pcpu_ptr(chunk->base_addr + off);
mm: kmemleak_alloc_percpu() should follow the gfp from per_alloc() Beginning at commit d52d3997f843 ("ipv6: Create percpu rt6_info"), the following INFO splat is logged: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc7-next-20150612 #1 Not tainted ------------------------------- kernel/sched/core.c:7318 Illegal context switch in RCU-bh read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 3 locks held by systemd/1: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815f0c8f>] rtnetlink_rcv+0x1f/0x40 #1: (rcu_read_lock_bh){......}, at: [<ffffffff816a34e2>] ipv6_add_addr+0x62/0x540 #2: (addrconf_hash_lock){+...+.}, at: [<ffffffff816a3604>] ipv6_add_addr+0x184/0x540 stack backtrace: CPU: 0 PID: 1 Comm: systemd Not tainted 4.1.0-rc7-next-20150612 #1 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 Call Trace: dump_stack+0x4c/0x6e lockdep_rcu_suspicious+0xe7/0x120 ___might_sleep+0x1d5/0x1f0 __might_sleep+0x4d/0x90 kmem_cache_alloc+0x47/0x250 create_object+0x39/0x2e0 kmemleak_alloc_percpu+0x61/0xe0 pcpu_alloc+0x370/0x630 Additional backtrace lines are truncated. In addition, the above splat is followed by several "BUG: sleeping function called from invalid context at mm/slub.c:1268" outputs. As suggested by Martin KaFai Lau, these are the clue to the fix. Routine kmemleak_alloc_percpu() always uses GFP_KERNEL for its allocations, whereas it should follow the gfp from its callers. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 07:58:51 +08:00
kmemleak_alloc_percpu(ptr, size, gfp);
trace_percpu_alloc_percpu(reserved, is_atomic, size, align,
chunk->base_addr, off, ptr);
return ptr;
fail_unlock:
spin_unlock_irqrestore(&pcpu_lock, flags);
fail:
trace_percpu_alloc_percpu_fail(reserved, is_atomic, size, align);
mm, percpu: add support for __GFP_NOWARN flag Add an option for pcpu_alloc() to support __GFP_NOWARN flag. Currently, we always throw a warning when size or alignment is unsupported (and also dump stack on failed allocation requests). The warning itself is harmless since we return NULL anyway for any failed request, which callers are required to handle anyway. However, it becomes harmful when panic_on_warn is set. The rationale for the WARN() in pcpu_alloc() is that it can be tracked when larger than supported allocation requests are made such that allocations limits can be tweaked if warranted. This makes sense for in-kernel users, however, there are users of pcpu allocator where allocation size is derived from user space requests, e.g. when creating BPF maps. In these cases, the requests should fail gracefully without throwing a splat. The current work-around was to check allocation size against the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for bailing out prior to a call to pcpu_alloc() in order to avoid throwing the WARN(). This is bad in multiple ways since PCPU_MIN_UNIT_SIZE is an implementation detail, and having the checks on call-sites only complicates the code for no good reason. Thus, lets fix it generically by supporting the __GFP_NOWARN flag that users can then use with calling the __alloc_percpu_gfp() helper instead. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-17 22:55:52 +08:00
if (!is_atomic && do_warn && warn_limit) {
pr_warn("allocation failed, size=%zu align=%zu atomic=%d, %s\n",
size, align, is_atomic, err);
dump_stack();
if (!--warn_limit)
pr_info("limit reached, disable warning\n");
}
if (is_atomic) {
/* see the flag handling in pcpu_blance_workfn() */
pcpu_atomic_alloc_failed = true;
pcpu_schedule_balance_work();
} else {
mutex_unlock(&pcpu_alloc_mutex);
}
return NULL;
}
/**
* __alloc_percpu_gfp - allocate dynamic percpu area
* @size: size of area to allocate in bytes
* @align: alignment of area (max PAGE_SIZE)
* @gfp: allocation flags
*
* Allocate zero-filled percpu area of @size bytes aligned at @align. If
* @gfp doesn't contain %GFP_KERNEL, the allocation doesn't block and can
mm, percpu: add support for __GFP_NOWARN flag Add an option for pcpu_alloc() to support __GFP_NOWARN flag. Currently, we always throw a warning when size or alignment is unsupported (and also dump stack on failed allocation requests). The warning itself is harmless since we return NULL anyway for any failed request, which callers are required to handle anyway. However, it becomes harmful when panic_on_warn is set. The rationale for the WARN() in pcpu_alloc() is that it can be tracked when larger than supported allocation requests are made such that allocations limits can be tweaked if warranted. This makes sense for in-kernel users, however, there are users of pcpu allocator where allocation size is derived from user space requests, e.g. when creating BPF maps. In these cases, the requests should fail gracefully without throwing a splat. The current work-around was to check allocation size against the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for bailing out prior to a call to pcpu_alloc() in order to avoid throwing the WARN(). This is bad in multiple ways since PCPU_MIN_UNIT_SIZE is an implementation detail, and having the checks on call-sites only complicates the code for no good reason. Thus, lets fix it generically by supporting the __GFP_NOWARN flag that users can then use with calling the __alloc_percpu_gfp() helper instead. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-17 22:55:52 +08:00
* be called from any context but is a lot more likely to fail. If @gfp
* has __GFP_NOWARN then no warning will be triggered on invalid or failed
* allocation requests.
*
* RETURNS:
* Percpu pointer to the allocated area on success, NULL on failure.
*/
void __percpu *__alloc_percpu_gfp(size_t size, size_t align, gfp_t gfp)
{
return pcpu_alloc(size, align, false, gfp);
}
EXPORT_SYMBOL_GPL(__alloc_percpu_gfp);
/**
* __alloc_percpu - allocate dynamic percpu area
* @size: size of area to allocate in bytes
* @align: alignment of area (max PAGE_SIZE)
*
* Equivalent to __alloc_percpu_gfp(size, align, %GFP_KERNEL).
*/
void __percpu *__alloc_percpu(size_t size, size_t align)
{
return pcpu_alloc(size, align, false, GFP_KERNEL);
}
EXPORT_SYMBOL_GPL(__alloc_percpu);
/**
* __alloc_reserved_percpu - allocate reserved percpu area
* @size: size of area to allocate in bytes
* @align: alignment of area (max PAGE_SIZE)
*
* Allocate zero-filled percpu area of @size bytes aligned at @align
* from reserved percpu area if arch has set it up; otherwise,
* allocation is served from the same dynamic area. Might sleep.
* Might trigger writeouts.
*
* CONTEXT:
* Does GFP_KERNEL allocation.
*
* RETURNS:
* Percpu pointer to the allocated area on success, NULL on failure.
*/
void __percpu *__alloc_reserved_percpu(size_t size, size_t align)
{
return pcpu_alloc(size, align, true, GFP_KERNEL);
}
/**
* pcpu_balance_workfn - manage the amount of free chunks and populated pages
* @work: unused
*
* Reclaim all fully free chunks except for the first one. This is also
* responsible for maintaining the pool of empty populated pages. However,
* it is possible that this is called when physical memory is scarce causing
* OOM killer to be triggered. We should avoid doing so until an actual
* allocation causes the failure as it is possible that requests can be
* serviced from already backed regions.
*/
static void pcpu_balance_workfn(struct work_struct *work)
{
/* gfp flags passed to underlying allocators */
const gfp_t gfp = GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN;
LIST_HEAD(to_free);
struct list_head *free_head = &pcpu_slot[pcpu_nr_slots - 1];
struct pcpu_chunk *chunk, *next;
int slot, nr_to_pop, ret;
/*
* There's no reason to keep around multiple unused chunks and VM
* areas can be scarce. Destroy all free chunks except for one.
*/
mutex_lock(&pcpu_alloc_mutex);
spin_lock_irq(&pcpu_lock);
list_for_each_entry_safe(chunk, next, free_head, list) {
WARN_ON(chunk->immutable);
/* spare the first one */
if (chunk == list_first_entry(free_head, struct pcpu_chunk, list))
continue;
list_move(&chunk->list, &to_free);
}
spin_unlock_irq(&pcpu_lock);
list_for_each_entry_safe(chunk, next, &to_free, list) {
int rs, re;
pcpu_for_each_pop_region(chunk->populated, rs, re, 0,
chunk->nr_pages) {
pcpu_depopulate_chunk(chunk, rs, re);
spin_lock_irq(&pcpu_lock);
pcpu_chunk_depopulated(chunk, rs, re);
spin_unlock_irq(&pcpu_lock);
}
pcpu_destroy_chunk(chunk);
cond_resched();
}
/*
* Ensure there are certain number of free populated pages for
* atomic allocs. Fill up from the most packed so that atomic
* allocs don't increase fragmentation. If atomic allocation
* failed previously, always populate the maximum amount. This
* should prevent atomic allocs larger than PAGE_SIZE from keeping
* failing indefinitely; however, large atomic allocs are not
* something we support properly and can be highly unreliable and
* inefficient.
*/
retry_pop:
if (pcpu_atomic_alloc_failed) {
nr_to_pop = PCPU_EMPTY_POP_PAGES_HIGH;
/* best effort anyway, don't worry about synchronization */
pcpu_atomic_alloc_failed = false;
} else {
nr_to_pop = clamp(PCPU_EMPTY_POP_PAGES_HIGH -
pcpu_nr_empty_pop_pages,
0, PCPU_EMPTY_POP_PAGES_HIGH);
}
for (slot = pcpu_size_to_slot(PAGE_SIZE); slot < pcpu_nr_slots; slot++) {
int nr_unpop = 0, rs, re;
if (!nr_to_pop)
break;
spin_lock_irq(&pcpu_lock);
list_for_each_entry(chunk, &pcpu_slot[slot], list) {
nr_unpop = chunk->nr_pages - chunk->nr_populated;
if (nr_unpop)
break;
}
spin_unlock_irq(&pcpu_lock);
if (!nr_unpop)
continue;
/* @chunk can't go away while pcpu_alloc_mutex is held */
pcpu_for_each_unpop_region(chunk->populated, rs, re, 0,
chunk->nr_pages) {
int nr = min(re - rs, nr_to_pop);
ret = pcpu_populate_chunk(chunk, rs, rs + nr, gfp);
if (!ret) {
nr_to_pop -= nr;
spin_lock_irq(&pcpu_lock);
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
pcpu_chunk_populated(chunk, rs, rs + nr, false);
spin_unlock_irq(&pcpu_lock);
} else {
nr_to_pop = 0;
}
if (!nr_to_pop)
break;
}
}
if (nr_to_pop) {
/* ran out of chunks to populate, create a new one and retry */
chunk = pcpu_create_chunk(gfp);
if (chunk) {
spin_lock_irq(&pcpu_lock);
pcpu_chunk_relocate(chunk, -1);
spin_unlock_irq(&pcpu_lock);
goto retry_pop;
}
}
mutex_unlock(&pcpu_alloc_mutex);
}
/**
* free_percpu - free percpu area
* @ptr: pointer to area to free
*
* Free percpu area @ptr.
*
* CONTEXT:
* Can be called from atomic context.
*/
void free_percpu(void __percpu *ptr)
{
void *addr;
struct pcpu_chunk *chunk;
unsigned long flags;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
int off;
if (!ptr)
return;
kmemleak_free_percpu(ptr);
addr = __pcpu_ptr_to_addr(ptr);
spin_lock_irqsave(&pcpu_lock, flags);
chunk = pcpu_chunk_addr_search(addr);
off = addr - chunk->base_addr;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
pcpu_free_area(chunk, off);
/* if there are more than one fully free chunks, wake up grim reaper */
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
if (chunk->free_bytes == pcpu_unit_size) {
struct pcpu_chunk *pos;
list_for_each_entry(pos, &pcpu_slot[pcpu_nr_slots - 1], list)
if (pos != chunk) {
pcpu_schedule_balance_work();
break;
}
}
trace_percpu_free_percpu(chunk->base_addr, off, ptr);
spin_unlock_irqrestore(&pcpu_lock, flags);
}
EXPORT_SYMBOL_GPL(free_percpu);
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 22:37:36 +08:00
bool __is_kernel_percpu_address(unsigned long addr, unsigned long *can_addr)
{
#ifdef CONFIG_SMP
const size_t static_size = __per_cpu_end - __per_cpu_start;
void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr);
unsigned int cpu;
for_each_possible_cpu(cpu) {
void *start = per_cpu_ptr(base, cpu);
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 22:37:36 +08:00
void *va = (void *)addr;
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 22:37:36 +08:00
if (va >= start && va < start + static_size) {
if (can_addr) {
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 22:37:36 +08:00
*can_addr = (unsigned long) (va - start);
*can_addr += (unsigned long)
per_cpu_ptr(base, get_boot_cpu_id());
}
return true;
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 22:37:36 +08:00
}
}
#endif
/* on UP, can't distinguish from other static vars, always false */
return false;
}
locking/lockdep: Handle statically initialized PER_CPU locks properly If a PER_CPU struct which contains a spin_lock is statically initialized via: DEFINE_PER_CPU(struct foo, bla) = { .lock = __SPIN_LOCK_UNLOCKED(bla.lock) }; then lockdep assigns a seperate key to each lock because the logic for assigning a key to statically initialized locks is to use the address as the key. With per CPU locks the address is obvioulsy different on each CPU. That's wrong, because all locks should have the same key. To solve this the following modifications are required: 1) Extend the is_kernel/module_percpu_addr() functions to hand back the canonical address of the per CPU address, i.e. the per CPU address minus the per CPU offset. 2) Check the lock address with these functions and if the per CPU check matches use the returned canonical address as the lock key, so all per CPU locks have the same key. 3) Move the static_obj(key) check into look_up_lock_class() so this check can be avoided for statically initialized per CPU locks. That's required because the canonical address fails the static_obj(key) check for obvious reasons. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ Merged Dan's fixups for !MODULES and !SMP into this patch. ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Murphy <dmurphy@ti.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27 22:37:36 +08:00
/**
* is_kernel_percpu_address - test whether address is from static percpu area
* @addr: address to test
*
* Test whether @addr belongs to in-kernel static percpu area. Module
* static percpu areas are not considered. For those, use
* is_module_percpu_address().
*
* RETURNS:
* %true if @addr is from in-kernel static percpu area, %false otherwise.
*/
bool is_kernel_percpu_address(unsigned long addr)
{
return __is_kernel_percpu_address(addr, NULL);
}
/**
* per_cpu_ptr_to_phys - convert translated percpu address to physical address
* @addr: the address to be converted to physical address
*
* Given @addr which is dereferenceable address obtained via one of
* percpu access macros, this function translates it into its physical
* address. The caller is responsible for ensuring @addr stays valid
* until this function finishes.
*
* percpu allocator has special setup for the first chunk, which currently
* supports either embedding in linear address space or vmalloc mapping,
* and, from the second one, the backing allocator (currently either vm or
* km) provides translation.
*
* The addr can be translated simply without checking if it falls into the
* first chunk. But the current code reflects better how percpu allocator
* actually works, and the verification can discover both bugs in percpu
* allocator itself and per_cpu_ptr_to_phys() callers. So we keep current
* code.
*
* RETURNS:
* The physical address for @addr.
*/
phys_addr_t per_cpu_ptr_to_phys(void *addr)
{
void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr);
bool in_first_chunk = false;
unsigned long first_low, first_high;
unsigned int cpu;
/*
* The following test on unit_low/high isn't strictly
* necessary but will speed up lookups of addresses which
* aren't in the first chunk.
*
* The address check is against full chunk sizes. pcpu_base_addr
* points to the beginning of the first chunk including the
* static region. Assumes good intent as the first chunk may
* not be full (ie. < pcpu_unit_pages in size).
*/
first_low = (unsigned long)pcpu_base_addr +
pcpu_unit_page_offset(pcpu_low_unit_cpu, 0);
first_high = (unsigned long)pcpu_base_addr +
pcpu_unit_page_offset(pcpu_high_unit_cpu, pcpu_unit_pages);
if ((unsigned long)addr >= first_low &&
(unsigned long)addr < first_high) {
for_each_possible_cpu(cpu) {
void *start = per_cpu_ptr(base, cpu);
if (addr >= start && addr < start + pcpu_unit_size) {
in_first_chunk = true;
break;
}
}
}
if (in_first_chunk) {
if (!is_vmalloc_addr(addr))
return __pa(addr);
else
percpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses per_cpu_ptr_to_phys() incorrectly rounds up its result for non-kmalloc case to the page boundary, which is bogus for any non-page-aligned address. This affects the only in-tree user of this function - sysfs handler for per-cpu 'crash_notes' physical address. The trouble is that the crash_notes per-cpu variable is not page-aligned: crash_notes = 0xc08e8ed4 PER-CPU OFFSET VALUES: CPU 0: 3711f000 CPU 1: 37129000 CPU 2: 37133000 CPU 3: 3713d000 So, the per-cpu addresses are: crash_notes on CPU 0: f7a07ed4 => phys 36b57ed4 crash_notes on CPU 1: f7a11ed4 => phys 36b4ded4 crash_notes on CPU 2: f7a1bed4 => phys 36b43ed4 crash_notes on CPU 3: f7a25ed4 => phys 36b39ed4 However, /sys/devices/system/cpu/cpu*/crash_notes says: /sys/devices/system/cpu/cpu0/crash_notes: 36b57000 /sys/devices/system/cpu/cpu1/crash_notes: 36b4d000 /sys/devices/system/cpu/cpu2/crash_notes: 36b43000 /sys/devices/system/cpu/cpu3/crash_notes: 36b39000 As you can see, all values are rounded down to a page boundary. Consequently, this is where kexec sets up the NOTE segments, and thus where the secondary kernel is looking for them. However, when the first kernel crashes, it saves the notes to the unaligned addresses, where they are not found. Fix it by adding offset_in_page() to the translated page address. -tj: Combined Eugene's and Petr's commit messages. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Petr Tesarik <ptesarik@suse.cz> Cc: stable@kernel.org
2011-12-16 03:25:59 +08:00
return page_to_phys(vmalloc_to_page(addr)) +
offset_in_page(addr);
} else
percpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses per_cpu_ptr_to_phys() incorrectly rounds up its result for non-kmalloc case to the page boundary, which is bogus for any non-page-aligned address. This affects the only in-tree user of this function - sysfs handler for per-cpu 'crash_notes' physical address. The trouble is that the crash_notes per-cpu variable is not page-aligned: crash_notes = 0xc08e8ed4 PER-CPU OFFSET VALUES: CPU 0: 3711f000 CPU 1: 37129000 CPU 2: 37133000 CPU 3: 3713d000 So, the per-cpu addresses are: crash_notes on CPU 0: f7a07ed4 => phys 36b57ed4 crash_notes on CPU 1: f7a11ed4 => phys 36b4ded4 crash_notes on CPU 2: f7a1bed4 => phys 36b43ed4 crash_notes on CPU 3: f7a25ed4 => phys 36b39ed4 However, /sys/devices/system/cpu/cpu*/crash_notes says: /sys/devices/system/cpu/cpu0/crash_notes: 36b57000 /sys/devices/system/cpu/cpu1/crash_notes: 36b4d000 /sys/devices/system/cpu/cpu2/crash_notes: 36b43000 /sys/devices/system/cpu/cpu3/crash_notes: 36b39000 As you can see, all values are rounded down to a page boundary. Consequently, this is where kexec sets up the NOTE segments, and thus where the secondary kernel is looking for them. However, when the first kernel crashes, it saves the notes to the unaligned addresses, where they are not found. Fix it by adding offset_in_page() to the translated page address. -tj: Combined Eugene's and Petr's commit messages. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Petr Tesarik <ptesarik@suse.cz> Cc: stable@kernel.org
2011-12-16 03:25:59 +08:00
return page_to_phys(pcpu_addr_to_page(addr)) +
offset_in_page(addr);
}
/**
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
* pcpu_alloc_alloc_info - allocate percpu allocation info
* @nr_groups: the number of groups
* @nr_units: the number of units
*
* Allocate ai which is large enough for @nr_groups groups containing
* @nr_units units. The returned ai's groups[0].cpu_map points to the
* cpu_map array which is long enough for @nr_units and filled with
* NR_CPUS. It's the caller's responsibility to initialize cpu_map
* pointer of other groups.
*
* RETURNS:
* Pointer to the allocated pcpu_alloc_info on success, NULL on
* failure.
*/
struct pcpu_alloc_info * __init pcpu_alloc_alloc_info(int nr_groups,
int nr_units)
{
struct pcpu_alloc_info *ai;
size_t base_size, ai_size;
void *ptr;
int unit;
base_size = ALIGN(sizeof(*ai) + nr_groups * sizeof(ai->groups[0]),
__alignof__(ai->groups[0].cpu_map[0]));
ai_size = base_size + nr_units * sizeof(ai->groups[0].cpu_map[0]);
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:08:04 +08:00
ptr = memblock_alloc_nopanic(PFN_ALIGN(ai_size), PAGE_SIZE);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
if (!ptr)
return NULL;
ai = ptr;
ptr += base_size;
ai->groups[0].cpu_map = ptr;
for (unit = 0; unit < nr_units; unit++)
ai->groups[0].cpu_map[unit] = NR_CPUS;
ai->nr_groups = nr_groups;
ai->__ai_size = PFN_ALIGN(ai_size);
return ai;
}
/**
* pcpu_free_alloc_info - free percpu allocation info
* @ai: pcpu_alloc_info to free
*
* Free @ai which was allocated by pcpu_alloc_alloc_info().
*/
void __init pcpu_free_alloc_info(struct pcpu_alloc_info *ai)
{
memblock_free_early(__pa(ai), ai->__ai_size);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
}
/**
* pcpu_dump_alloc_info - print out information about pcpu_alloc_info
* @lvl: loglevel
* @ai: allocation info to dump
*
* Print out information about @ai using loglevel @lvl.
*/
static void pcpu_dump_alloc_info(const char *lvl,
const struct pcpu_alloc_info *ai)
{
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
int group_width = 1, cpu_width = 1, width;
char empty_str[] = "--------";
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
int alloc = 0, alloc_end = 0;
int group, v;
int upa, apl; /* units per alloc, allocs per line */
v = ai->nr_groups;
while (v /= 10)
group_width++;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
v = num_possible_cpus();
while (v /= 10)
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
cpu_width++;
empty_str[min_t(int, cpu_width, sizeof(empty_str) - 1)] = '\0';
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
upa = ai->alloc_size / ai->unit_size;
width = upa * (cpu_width + 1) + group_width + 3;
apl = rounddown_pow_of_two(max(60 / width, 1));
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
printk("%spcpu-alloc: s%zu r%zu d%zu u%zu alloc=%zu*%zu",
lvl, ai->static_size, ai->reserved_size, ai->dyn_size,
ai->unit_size, ai->alloc_size / ai->atom_size, ai->atom_size);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
for (group = 0; group < ai->nr_groups; group++) {
const struct pcpu_group_info *gi = &ai->groups[group];
int unit = 0, unit_end = 0;
BUG_ON(gi->nr_units % upa);
for (alloc_end += gi->nr_units / upa;
alloc < alloc_end; alloc++) {
if (!(alloc % apl)) {
pr_cont("\n");
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
printk("%spcpu-alloc: ", lvl);
}
pr_cont("[%0*d] ", group_width, group);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
for (unit_end += upa; unit < unit_end; unit++)
if (gi->cpu_map[unit] != NR_CPUS)
pr_cont("%0*d ",
cpu_width, gi->cpu_map[unit]);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
else
pr_cont("%s ", empty_str);
}
}
pr_cont("\n");
}
/**
* pcpu_setup_first_chunk - initialize the first percpu chunk
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
* @ai: pcpu_alloc_info describing how to percpu area is shaped
* @base_addr: mapped address
*
* Initialize the first percpu chunk which contains the kernel static
* perpcu area. This function is to be called from arch percpu area
* setup path.
*
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
* @ai contains all information necessary to initialize the first
* chunk and prime the dynamic percpu allocator.
*
* @ai->static_size is the size of static percpu area.
*
* @ai->reserved_size, if non-zero, specifies the amount of bytes to
* reserve after the static area in the first chunk. This reserves
* the first chunk such that it's available only through reserved
* percpu allocation. This is primarily used to serve module percpu
* static areas on architectures where the addressing model has
* limited offset range for symbol relocations to guarantee module
* percpu symbols fall inside the relocatable range.
*
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
* @ai->dyn_size determines the number of bytes available for dynamic
* allocation in the first chunk. The area between @ai->static_size +
* @ai->reserved_size + @ai->dyn_size and @ai->unit_size is unused.
*
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
* @ai->unit_size specifies unit size and must be aligned to PAGE_SIZE
* and equal to or larger than @ai->static_size + @ai->reserved_size +
* @ai->dyn_size.
*
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
* @ai->atom_size is the allocation atom size and used as alignment
* for vm areas.
*
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
* @ai->alloc_size is the allocation size and always multiple of
* @ai->atom_size. This is larger than @ai->atom_size if
* @ai->unit_size is larger than @ai->atom_size.
*
* @ai->nr_groups and @ai->groups describe virtual memory layout of
* percpu areas. Units which should be colocated are put into the
* same group. Dynamic VM areas will be allocated according to these
* groupings. If @ai->nr_groups is zero, a single group containing
* all units is assumed.
*
* The caller should have mapped the first chunk at @base_addr and
* copied static data to each unit.
*
* The first chunk will always contain a static and a dynamic region.
* However, the static region is not managed by any chunk. If the first
* chunk also contains a reserved region, it is served by two chunks -
* one for the reserved region and one for the dynamic region. They
* share the same vm, but use offset regions in the area allocation map.
* The chunk serving the dynamic region is circulated in the chunk slots
* and available for dynamic allocation like any other chunk.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
void *base_addr)
{
size_t size_sum = ai->static_size + ai->reserved_size + ai->dyn_size;
size_t static_size, dyn_size;
struct pcpu_chunk *chunk;
unsigned long *group_offsets;
size_t *group_sizes;
unsigned long *unit_off;
unsigned int cpu;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
int *unit_map;
int group, unit, i;
int map_size;
unsigned long tmp_addr;
#define PCPU_SETUP_BUG_ON(cond) do { \
if (unlikely(cond)) { \
pr_emerg("failed to initialize, %s\n", #cond); \
pr_emerg("cpu_possible_mask=%*pb\n", \
cpumask_pr_args(cpu_possible_mask)); \
pcpu_dump_alloc_info(KERN_EMERG, ai); \
BUG(); \
} \
} while (0)
/* sanity checks */
PCPU_SETUP_BUG_ON(ai->nr_groups <= 0);
#ifdef CONFIG_SMP
PCPU_SETUP_BUG_ON(!ai->static_size);
PCPU_SETUP_BUG_ON(offset_in_page(__per_cpu_start));
#endif
PCPU_SETUP_BUG_ON(!base_addr);
PCPU_SETUP_BUG_ON(offset_in_page(base_addr));
PCPU_SETUP_BUG_ON(ai->unit_size < size_sum);
PCPU_SETUP_BUG_ON(offset_in_page(ai->unit_size));
PCPU_SETUP_BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE);
PCPU_SETUP_BUG_ON(!IS_ALIGNED(ai->unit_size, PCPU_BITMAP_BLOCK_SIZE));
PCPU_SETUP_BUG_ON(ai->dyn_size < PERCPU_DYNAMIC_EARLY_SIZE);
PCPU_SETUP_BUG_ON(!ai->dyn_size);
PCPU_SETUP_BUG_ON(!IS_ALIGNED(ai->reserved_size, PCPU_MIN_ALLOC_SIZE));
PCPU_SETUP_BUG_ON(!(IS_ALIGNED(PCPU_BITMAP_BLOCK_SIZE, PAGE_SIZE) ||
IS_ALIGNED(PAGE_SIZE, PCPU_BITMAP_BLOCK_SIZE)));
PCPU_SETUP_BUG_ON(pcpu_verify_alloc_info(ai) < 0);
/* process group information and build config tables accordingly */
memblock: stop using implicit alignment to SMP_CACHE_BYTES When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:57 +08:00
group_offsets = memblock_alloc(ai->nr_groups * sizeof(group_offsets[0]),
SMP_CACHE_BYTES);
group_sizes = memblock_alloc(ai->nr_groups * sizeof(group_sizes[0]),
SMP_CACHE_BYTES);
unit_map = memblock_alloc(nr_cpu_ids * sizeof(unit_map[0]),
SMP_CACHE_BYTES);
unit_off = memblock_alloc(nr_cpu_ids * sizeof(unit_off[0]),
SMP_CACHE_BYTES);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
for (cpu = 0; cpu < nr_cpu_ids; cpu++)
unit_map[cpu] = UINT_MAX;
pcpu_low_unit_cpu = NR_CPUS;
pcpu_high_unit_cpu = NR_CPUS;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) {
const struct pcpu_group_info *gi = &ai->groups[group];
group_offsets[group] = gi->base_offset;
group_sizes[group] = gi->nr_units * ai->unit_size;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
for (i = 0; i < gi->nr_units; i++) {
cpu = gi->cpu_map[i];
if (cpu == NR_CPUS)
continue;
PCPU_SETUP_BUG_ON(cpu >= nr_cpu_ids);
PCPU_SETUP_BUG_ON(!cpu_possible(cpu));
PCPU_SETUP_BUG_ON(unit_map[cpu] != UINT_MAX);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
unit_map[cpu] = unit + i;
unit_off[cpu] = gi->base_offset + i * ai->unit_size;
/* determine low/high unit_cpu */
if (pcpu_low_unit_cpu == NR_CPUS ||
unit_off[cpu] < unit_off[pcpu_low_unit_cpu])
pcpu_low_unit_cpu = cpu;
if (pcpu_high_unit_cpu == NR_CPUS ||
unit_off[cpu] > unit_off[pcpu_high_unit_cpu])
pcpu_high_unit_cpu = cpu;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
}
}
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
pcpu_nr_units = unit;
for_each_possible_cpu(cpu)
PCPU_SETUP_BUG_ON(unit_map[cpu] == UINT_MAX);
/* we're done parsing the input, undefine BUG macro and dump config */
#undef PCPU_SETUP_BUG_ON
pcpu_dump_alloc_info(KERN_DEBUG, ai);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
pcpu_nr_groups = ai->nr_groups;
pcpu_group_offsets = group_offsets;
pcpu_group_sizes = group_sizes;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
pcpu_unit_map = unit_map;
pcpu_unit_offsets = unit_off;
/* determine basic parameters */
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
pcpu_unit_pages = ai->unit_size >> PAGE_SHIFT;
pcpu_unit_size = pcpu_unit_pages << PAGE_SHIFT;
pcpu_atom_size = ai->atom_size;
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
pcpu_chunk_struct_size = sizeof(struct pcpu_chunk) +
BITS_TO_LONGS(pcpu_unit_pages) * sizeof(unsigned long);
pcpu_stats_save_ai(ai);
/*
* Allocate chunk slots. The additional last slot is for
* empty chunks.
*/
pcpu_nr_slots = __pcpu_size_to_slot(pcpu_unit_size) + 2;
memblock: stop using implicit alignment to SMP_CACHE_BYTES When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:57 +08:00
pcpu_slot = memblock_alloc(pcpu_nr_slots * sizeof(pcpu_slot[0]),
SMP_CACHE_BYTES);
for (i = 0; i < pcpu_nr_slots; i++)
INIT_LIST_HEAD(&pcpu_slot[i]);
/*
* The end of the static region needs to be aligned with the
* minimum allocation size as this offsets the reserved and
* dynamic region. The first chunk ends page aligned by
* expanding the dynamic region, therefore the dynamic region
* can be shrunk to compensate while still staying above the
* configured sizes.
*/
static_size = ALIGN(ai->static_size, PCPU_MIN_ALLOC_SIZE);
dyn_size = ai->dyn_size - (static_size - ai->static_size);
/*
* Initialize first chunk.
* If the reserved_size is non-zero, this initializes the reserved
* chunk. If the reserved_size is zero, the reserved chunk is NULL
* and the dynamic region is initialized here. The first chunk,
* pcpu_first_chunk, will always point to the chunk that serves
* the dynamic region.
*/
tmp_addr = (unsigned long)base_addr + static_size;
map_size = ai->reserved_size ?: dyn_size;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk = pcpu_alloc_first_chunk(tmp_addr, map_size);
/* init dynamic chunk if necessary */
if (ai->reserved_size) {
pcpu_reserved_chunk = chunk;
tmp_addr = (unsigned long)base_addr + static_size +
ai->reserved_size;
map_size = dyn_size;
percpu: replace area map allocator with bitmap The percpu memory allocator is experiencing scalability issues when allocating and freeing large numbers of counters as in BPF. Additionally, there is a corner case where iteration is triggered over all chunks if the contig_hint is the right size, but wrong alignment. This patch replaces the area map allocator with a basic bitmap allocator implementation. Each subsequent patch will introduce new features and replace full scanning functions with faster non-scanning options when possible. Implementation: This patchset removes the area map allocator in favor of a bitmap allocator backed by metadata blocks. The primary goal is to provide consistency in performance and memory footprint with a focus on small allocations (< 64 bytes). The bitmap removes the heavy memmove from the freeing critical path and provides a consistent memory footprint. The metadata blocks provide a bound on the amount of scanning required by maintaining a set of hints. In an effort to make freeing fast, the metadata is updated on the free path if the new free area makes a page free, a block free, or spans across blocks. This causes the chunk's contig hint to potentially be smaller than what it could allocate by up to the smaller of a page or a block. If the chunk's contig hint is contained within a block, a check occurs and the hint is kept accurate. Metadata is always kept accurate on allocation, so there will not be a situation where a chunk has a later contig hint than available. Evaluation: I have primarily done testing against a simple workload of allocation of 1 million objects (2^20) of varying size. Deallocation was done by in order, alternating, and in reverse. These numbers were collected after rebasing ontop of a80099a152. I present the worst-case numbers here: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 310 | 4770 16B | 557 | 1325 64B | 436 | 273 256B | 776 | 131 1024B | 3280 | 122 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 490 | 70 16B | 515 | 75 64B | 610 | 80 256B | 950 | 100 1024B | 3520 | 200 This data demonstrates the inability for the area map allocator to handle less than ideal situations. In the best case of reverse deallocation, the area map allocator was able to perform within range of the bitmap allocator. In the worst case situation, freeing took nearly 5 seconds for 1 million 4-byte objects. The bitmap allocator dramatically improves the consistency of the free path. The small allocations performed nearly identical regardless of the freeing pattern. While it does add to the allocation latency, the allocation scenario here is optimal for the area map allocator. The area map allocator runs into trouble when it is allocating in chunks where the latter half is full. It is difficult to replicate this, so I present a variant where the pages are second half filled. Freeing was done sequentially. Below are the numbers for this scenario: Area Map Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 4118 | 4892 16B | 1651 | 1163 64B | 598 | 285 256B | 771 | 158 1024B | 3034 | 160 Bitmap Allocator: Object Size | Alloc Time (ms) | Free Time (ms) ---------------------------------------------- 4B | 481 | 67 16B | 506 | 69 64B | 636 | 75 256B | 892 | 90 1024B | 3262 | 147 The data shows a parabolic curve of performance for the area map allocator. This is due to the memmove operation being the dominant cost with the lower object sizes as more objects are packed in a chunk and at higher object sizes, the traversal of the chunk slots is the dominating cost. The bitmap allocator suffers this problem as well. The above data shows the inability to scale for the allocation path with the area map allocator and that the bitmap allocator demonstrates consistent performance in general. The second problem of additional scanning can result in the area map allocator completing in 52 minutes when trying to allocate 1 million 4-byte objects with 8-byte alignment. The same workload takes approximately 16 seconds to complete for the bitmap allocator. V2: Fixed a bug in pcpu_alloc_first_chunk end_offset was setting the bitmap using bytes instead of bits. Added a comment to pcpu_cnt_pop_pages to explain bitmap_weight. Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-13 02:27:32 +08:00
chunk = pcpu_alloc_first_chunk(tmp_addr, map_size);
}
/* link the first chunk in */
pcpu_first_chunk = chunk;
pcpu_nr_empty_pop_pages = pcpu_first_chunk->nr_empty_pop_pages;
pcpu_chunk_relocate(pcpu_first_chunk, -1);
/proc/meminfo: add percpu populated pages count Currently, percpu memory only exposes allocation and utilization information via debugfs. This more or less is only really useful for understanding the fragmentation and allocation information at a per-chunk level with a few global counters. This is also gated behind a config. BPF and cgroup, for example, have seen an increase in use causing increased use of percpu memory. Let's make it easier for someone to identify how much memory is being used. This patch adds the "Percpu" stat to meminfo to more easily look up how much percpu memory is in use. This number includes the cost for all allocated backing pages and not just insight at the per a unit, per chunk level. Metadata is excluded. I think excluding metadata is fair because the backing memory scales with the numbere of cpus and can quickly outweigh the metadata. It also makes this calculation light. Link: http://lkml.kernel.org/r/20180807184723.74919-1-dennisszhou@gmail.com Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 12:53:58 +08:00
/* include all regions of the first chunk */
pcpu_nr_populated += PFN_DOWN(size_sum);
pcpu_stats_chunk_alloc();
trace_percpu_create_chunk(base_addr);
/* we're done */
pcpu_base_addr = base_addr;
return 0;
}
#ifdef CONFIG_SMP
const char * const pcpu_fc_names[PCPU_FC_NR] __initconst = {
[PCPU_FC_AUTO] = "auto",
[PCPU_FC_EMBED] = "embed",
[PCPU_FC_PAGE] = "page",
};
enum pcpu_fc pcpu_chosen_fc __initdata = PCPU_FC_AUTO;
static int __init percpu_alloc_setup(char *str)
{
if (!str)
return -EINVAL;
if (0)
/* nada */;
#ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK
else if (!strcmp(str, "embed"))
pcpu_chosen_fc = PCPU_FC_EMBED;
#endif
#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK
else if (!strcmp(str, "page"))
pcpu_chosen_fc = PCPU_FC_PAGE;
#endif
else
pr_warn("unknown allocator %s specified\n", str);
return 0;
}
early_param("percpu_alloc", percpu_alloc_setup);
/*
* pcpu_embed_first_chunk() is used by the generic percpu setup.
* Build it if needed by the arch config or the generic setup is going
* to be used.
*/
#if defined(CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK) || \
!defined(CONFIG_HAVE_SETUP_PER_CPU_AREA)
#define BUILD_EMBED_FIRST_CHUNK
#endif
/* build pcpu_page_first_chunk() iff needed by the arch config */
#if defined(CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK)
#define BUILD_PAGE_FIRST_CHUNK
#endif
/* pcpu_build_alloc_info() is used by both embed and page first chunk */
#if defined(BUILD_EMBED_FIRST_CHUNK) || defined(BUILD_PAGE_FIRST_CHUNK)
/**
* pcpu_build_alloc_info - build alloc_info considering distances between CPUs
* @reserved_size: the size of reserved percpu area in bytes
* @dyn_size: minimum free size for dynamic allocation in bytes
* @atom_size: allocation atom size
* @cpu_distance_fn: callback to determine distance between cpus, optional
*
* This function determines grouping of units, their mappings to cpus
* and other parameters considering needed percpu size, allocation
* atom size and distances between CPUs.
*
* Groups are always multiples of atom size and CPUs which are of
* LOCAL_DISTANCE both ways are grouped together and share space for
* units in the same group. The returned configuration is guaranteed
* to have CPUs on different nodes on different groups and >=75% usage
* of allocated virtual address space.
*
* RETURNS:
* On success, pointer to the new allocation_info is returned. On
* failure, ERR_PTR value is returned.
*/
static struct pcpu_alloc_info * __init pcpu_build_alloc_info(
size_t reserved_size, size_t dyn_size,
size_t atom_size,
pcpu_fc_cpu_distance_fn_t cpu_distance_fn)
{
static int group_map[NR_CPUS] __initdata;
static int group_cnt[NR_CPUS] __initdata;
const size_t static_size = __per_cpu_end - __per_cpu_start;
int nr_groups = 1, nr_units = 0;
size_t size_sum, min_unit_size, alloc_size;
int upa, max_upa, uninitialized_var(best_upa); /* units_per_alloc */
int last_allocs, group, unit;
unsigned int cpu, tcpu;
struct pcpu_alloc_info *ai;
unsigned int *cpu_map;
/* this function may be called multiple times */
memset(group_map, 0, sizeof(group_map));
memset(group_cnt, 0, sizeof(group_cnt));
/* calculate size_sum and ensure dyn_size is enough for early alloc */
size_sum = PFN_ALIGN(static_size + reserved_size +
max_t(size_t, dyn_size, PERCPU_DYNAMIC_EARLY_SIZE));
dyn_size = size_sum - static_size - reserved_size;
/*
* Determine min_unit_size, alloc_size and max_upa such that
* alloc_size is multiple of atom_size and is the smallest
* which can accommodate 4k aligned segments which are equal to
* or larger than min_unit_size.
*/
min_unit_size = max_t(size_t, size_sum, PCPU_MIN_UNIT_SIZE);
/* determine the maximum # of units that can fit in an allocation */
alloc_size = roundup(min_unit_size, atom_size);
upa = alloc_size / min_unit_size;
while (alloc_size % upa || (offset_in_page(alloc_size / upa)))
upa--;
max_upa = upa;
/* group cpus according to their proximity */
for_each_possible_cpu(cpu) {
group = 0;
next_group:
for_each_possible_cpu(tcpu) {
if (cpu == tcpu)
break;
if (group_map[tcpu] == group && cpu_distance_fn &&
(cpu_distance_fn(cpu, tcpu) > LOCAL_DISTANCE ||
cpu_distance_fn(tcpu, cpu) > LOCAL_DISTANCE)) {
group++;
nr_groups = max(nr_groups, group + 1);
goto next_group;
}
}
group_map[cpu] = group;
group_cnt[group]++;
}
/*
* Wasted space is caused by a ratio imbalance of upa to group_cnt.
* Expand the unit_size until we use >= 75% of the units allocated.
* Related to atom_size, which could be much larger than the unit_size.
*/
last_allocs = INT_MAX;
for (upa = max_upa; upa; upa--) {
int allocs = 0, wasted = 0;
if (alloc_size % upa || (offset_in_page(alloc_size / upa)))
continue;
for (group = 0; group < nr_groups; group++) {
int this_allocs = DIV_ROUND_UP(group_cnt[group], upa);
allocs += this_allocs;
wasted += this_allocs * upa - group_cnt[group];
}
/*
* Don't accept if wastage is over 1/3. The
* greater-than comparison ensures upa==1 always
* passes the following check.
*/
if (wasted > num_possible_cpus() / 3)
continue;
/* and then don't consume more memory */
if (allocs > last_allocs)
break;
last_allocs = allocs;
best_upa = upa;
}
upa = best_upa;
/* allocate and fill alloc_info */
for (group = 0; group < nr_groups; group++)
nr_units += roundup(group_cnt[group], upa);
ai = pcpu_alloc_alloc_info(nr_groups, nr_units);
if (!ai)
return ERR_PTR(-ENOMEM);
cpu_map = ai->groups[0].cpu_map;
for (group = 0; group < nr_groups; group++) {
ai->groups[group].cpu_map = cpu_map;
cpu_map += roundup(group_cnt[group], upa);
}
ai->static_size = static_size;
ai->reserved_size = reserved_size;
ai->dyn_size = dyn_size;
ai->unit_size = alloc_size / upa;
ai->atom_size = atom_size;
ai->alloc_size = alloc_size;
for (group = 0, unit = 0; group_cnt[group]; group++) {
struct pcpu_group_info *gi = &ai->groups[group];
/*
* Initialize base_offset as if all groups are located
* back-to-back. The caller should update this to
* reflect actual allocation.
*/
gi->base_offset = unit * ai->unit_size;
for_each_possible_cpu(cpu)
if (group_map[cpu] == group)
gi->cpu_map[gi->nr_units++] = cpu;
gi->nr_units = roundup(gi->nr_units, upa);
unit += gi->nr_units;
}
BUG_ON(unit != nr_units);
return ai;
}
#endif /* BUILD_EMBED_FIRST_CHUNK || BUILD_PAGE_FIRST_CHUNK */
#if defined(BUILD_EMBED_FIRST_CHUNK)
/**
* pcpu_embed_first_chunk - embed the first percpu chunk into bootmem
* @reserved_size: the size of reserved percpu area in bytes
* @dyn_size: minimum free size for dynamic allocation in bytes
* @atom_size: allocation atom size
* @cpu_distance_fn: callback to determine distance between cpus, optional
* @alloc_fn: function to allocate percpu page
* @free_fn: function to free percpu page
*
* This is a helper to ease setting up embedded first percpu chunk and
* can be called where pcpu_setup_first_chunk() is expected.
*
* If this function is used to setup the first chunk, it is allocated
* by calling @alloc_fn and used as-is without being mapped into
* vmalloc area. Allocations are always whole multiples of @atom_size
* aligned to @atom_size.
*
* This enables the first chunk to piggy back on the linear physical
* mapping which often uses larger page size. Please note that this
* can result in very sparse cpu->unit mapping on NUMA machines thus
* requiring large vmalloc address space. Don't use this allocator if
* vmalloc space is not orders of magnitude larger than distances
* between node memory addresses (ie. 32bit NUMA machines).
*
* @dyn_size specifies the minimum dynamic area size.
*
* If the needed size is smaller than the minimum or specified unit
* size, the leftover is returned using @free_fn.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
size_t atom_size,
pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
pcpu_fc_alloc_fn_t alloc_fn,
pcpu_fc_free_fn_t free_fn)
{
void *base = (void *)ULONG_MAX;
void **areas = NULL;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
struct pcpu_alloc_info *ai;
size_t size_sum, areas_size;
unsigned long max_distance;
int group, i, highest_group, rc;
ai = pcpu_build_alloc_info(reserved_size, dyn_size, atom_size,
cpu_distance_fn);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
if (IS_ERR(ai))
return PTR_ERR(ai);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
size_sum = ai->static_size + ai->reserved_size + ai->dyn_size;
areas_size = PFN_ALIGN(ai->nr_groups * sizeof(void *));
memblock: stop using implicit alignment to SMP_CACHE_BYTES When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:57 +08:00
areas = memblock_alloc_nopanic(areas_size, SMP_CACHE_BYTES);
if (!areas) {
rc = -ENOMEM;
goto out_free;
}
/* allocate, copy and determine base address & max_distance */
highest_group = 0;
for (group = 0; group < ai->nr_groups; group++) {
struct pcpu_group_info *gi = &ai->groups[group];
unsigned int cpu = NR_CPUS;
void *ptr;
for (i = 0; i < gi->nr_units && cpu == NR_CPUS; i++)
cpu = gi->cpu_map[i];
BUG_ON(cpu == NR_CPUS);
/* allocate space for the whole group */
ptr = alloc_fn(cpu, gi->nr_units * ai->unit_size, atom_size);
if (!ptr) {
rc = -ENOMEM;
goto out_free_areas;
}
/* kmemleak tracks the percpu allocations separately */
kmemleak_free(ptr);
areas[group] = ptr;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
base = min(ptr, base);
if (ptr > areas[highest_group])
highest_group = group;
}
max_distance = areas[highest_group] - base;
max_distance += ai->unit_size * ai->groups[highest_group].nr_units;
/* warn if maximum distance is further than 75% of vmalloc space */
if (max_distance > VMALLOC_TOTAL * 3 / 4) {
pr_warn("max_distance=0x%lx too large for vmalloc space 0x%lx\n",
max_distance, VMALLOC_TOTAL);
#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK
/* and fail if we have fallback */
rc = -EINVAL;
goto out_free_areas;
#endif
}
/*
* Copy data and free unused parts. This should happen after all
* allocations are complete; otherwise, we may end up with
* overlapping groups.
*/
for (group = 0; group < ai->nr_groups; group++) {
struct pcpu_group_info *gi = &ai->groups[group];
void *ptr = areas[group];
for (i = 0; i < gi->nr_units; i++, ptr += ai->unit_size) {
if (gi->cpu_map[i] == NR_CPUS) {
/* unused unit, free whole */
free_fn(ptr, ai->unit_size);
continue;
}
/* copy and return the unused part */
memcpy(ptr, __per_cpu_load, ai->static_size);
free_fn(ptr + size_sum, ai->unit_size - size_sum);
}
}
/* base address is now known, determine group base offsets */
for (group = 0; group < ai->nr_groups; group++) {
ai->groups[group].base_offset = areas[group] - base;
}
pr_info("Embedded %zu pages/cpu @%p s%zu r%zu d%zu u%zu\n",
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
PFN_DOWN(size_sum), base, ai->static_size, ai->reserved_size,
ai->dyn_size, ai->unit_size);
rc = pcpu_setup_first_chunk(ai, base);
goto out_free;
out_free_areas:
for (group = 0; group < ai->nr_groups; group++)
percpu: fix bootmem error handling in pcpu_page_first_chunk() If memory allocation of in pcpu_embed_first_chunk() fails, the allocated memory is not released correctly. In the release loop also the non-allocated elements are released which leads to the following kernel BUG on systems with very little memory: [ 0.000000] kernel BUG at mm/bootmem.c:307! [ 0.000000] illegal operation: 0001 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0 #22 [ 0.000000] task: 0000000000a20ae0 ti: 0000000000a08000 task.ti: 0000000000a08000 [ 0.000000] Krnl PSW : 0400000180000000 0000000000abda7a (__free+0x116/0x154) [ 0.000000] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 EA:3 ... [ 0.000000] [<0000000000abdce2>] mark_bootmem_node+0xde/0xf0 [ 0.000000] [<0000000000abdd9c>] mark_bootmem+0xa8/0x118 [ 0.000000] [<0000000000abcbba>] pcpu_embed_first_chunk+0xe7a/0xf0c [ 0.000000] [<0000000000abcc96>] setup_per_cpu_areas+0x4a/0x28c To fix the problem now only allocated elements are released. This then leads to the correct kernel panic: [ 0.000000] Kernel panic - not syncing: Failed to initialize percpu areas. ... [ 0.000000] Call Trace: [ 0.000000] ([<000000000011307e>] show_trace+0x132/0x150) [ 0.000000] [<0000000000113160>] show_stack+0xc4/0xd4 [ 0.000000] [<00000000007127dc>] dump_stack+0x74/0xd8 [ 0.000000] [<00000000007123fe>] panic+0xea/0x264 [ 0.000000] [<0000000000b14814>] setup_per_cpu_areas+0x5c/0x28c tj: Flipped if conditional so that it doesn't need "continue". Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-09-17 22:57:34 +08:00
if (areas[group])
free_fn(areas[group],
ai->groups[group].nr_units * ai->unit_size);
out_free:
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
pcpu_free_alloc_info(ai);
if (areas)
memblock_free_early(__pa(areas), areas_size);
return rc;
}
#endif /* BUILD_EMBED_FIRST_CHUNK */
#ifdef BUILD_PAGE_FIRST_CHUNK
/**
* pcpu_page_first_chunk - map the first chunk using PAGE_SIZE pages
* @reserved_size: the size of reserved percpu area in bytes
* @alloc_fn: function to allocate percpu page, always called with PAGE_SIZE
* @free_fn: function to free percpu page, always called with PAGE_SIZE
* @populate_pte_fn: function to populate pte
*
* This is a helper to ease setting up page-remapped first percpu
* chunk and can be called where pcpu_setup_first_chunk() is expected.
*
* This is the basic allocator. Static percpu area is allocated
* page-by-page into vmalloc area.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init pcpu_page_first_chunk(size_t reserved_size,
pcpu_fc_alloc_fn_t alloc_fn,
pcpu_fc_free_fn_t free_fn,
pcpu_fc_populate_pte_fn_t populate_pte_fn)
{
static struct vm_struct vm;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
struct pcpu_alloc_info *ai;
char psize_str[16];
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
int unit_pages;
size_t pages_size;
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
struct page **pages;
int unit, i, j, rc;
int upa;
int nr_g0_units;
snprintf(psize_str, sizeof(psize_str), "%luK", PAGE_SIZE >> 10);
ai = pcpu_build_alloc_info(reserved_size, 0, PAGE_SIZE, NULL);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
if (IS_ERR(ai))
return PTR_ERR(ai);
BUG_ON(ai->nr_groups != 1);
upa = ai->alloc_size/ai->unit_size;
nr_g0_units = roundup(num_possible_cpus(), upa);
if (WARN_ON(ai->groups[0].nr_units != nr_g0_units)) {
pcpu_free_alloc_info(ai);
return -EINVAL;
}
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
unit_pages = ai->unit_size >> PAGE_SHIFT;
/* unaligned allocations can't be freed, round up to page size */
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
pages_size = PFN_ALIGN(unit_pages * num_possible_cpus() *
sizeof(pages[0]));
memblock: stop using implicit alignment to SMP_CACHE_BYTES When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:57 +08:00
pages = memblock_alloc(pages_size, SMP_CACHE_BYTES);
/* allocate pages */
j = 0;
for (unit = 0; unit < num_possible_cpus(); unit++) {
unsigned int cpu = ai->groups[0].cpu_map[unit];
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
for (i = 0; i < unit_pages; i++) {
void *ptr;
ptr = alloc_fn(cpu, PAGE_SIZE, PAGE_SIZE);
if (!ptr) {
pr_warn("failed to allocate %s page for cpu%u\n",
psize_str, cpu);
goto enomem;
}
/* kmemleak tracks the percpu allocations separately */
kmemleak_free(ptr);
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
pages[j++] = virt_to_page(ptr);
}
}
/* allocate vm area, map the pages and copy static data */
vm.flags = VM_ALLOC;
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
vm.size = num_possible_cpus() * ai->unit_size;
vm_area_register_early(&vm, PAGE_SIZE);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
for (unit = 0; unit < num_possible_cpus(); unit++) {
unsigned long unit_addr =
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
(unsigned long)vm.addr + unit * ai->unit_size;
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
for (i = 0; i < unit_pages; i++)
populate_pte_fn(unit_addr + (i << PAGE_SHIFT));
/* pte already populated, the following shouldn't fail */
rc = __pcpu_map_pages(unit_addr, &pages[unit * unit_pages],
unit_pages);
if (rc < 0)
panic("failed to map percpu area, err=%d\n", rc);
/*
* FIXME: Archs with virtual cache should flush local
* cache for the linear mapping here - something
* equivalent to flush_cache_vmap() on the local cpu.
* flush_cache_vmap() can't be used as most supporting
* data structures are not set up yet.
*/
/* copy static data */
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
memcpy((void *)unit_addr, __per_cpu_load, ai->static_size);
}
/* we're ready, commit */
pr_info("%d %s pages/cpu @%p s%zu r%zu d%zu\n",
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
unit_pages, psize_str, vm.addr, ai->static_size,
ai->reserved_size, ai->dyn_size);
rc = pcpu_setup_first_chunk(ai, vm.addr);
goto out_free_ar;
enomem:
while (--j >= 0)
percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-07-04 07:11:00 +08:00
free_fn(page_address(pages[j]), PAGE_SIZE);
rc = -ENOMEM;
out_free_ar:
memblock_free_early(__pa(pages), pages_size);
percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
2009-08-14 14:00:51 +08:00
pcpu_free_alloc_info(ai);
return rc;
}
#endif /* BUILD_PAGE_FIRST_CHUNK */
#ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA
percpu: use dynamic percpu allocator as the default percpu allocator This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu>
2009-03-30 18:07:44 +08:00
/*
* Generic SMP percpu area setup.
percpu: use dynamic percpu allocator as the default percpu allocator This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu>
2009-03-30 18:07:44 +08:00
*
* The embedding helper is used because its behavior closely resembles
* the original non-dynamic generic percpu area setup. This is
* important because many archs have addressing restrictions and might
* fail if the percpu area is located far away from the previous
* location. As an added bonus, in non-NUMA cases, embedding is
* generally a good idea TLB-wise because percpu area can piggy back
* on the physical linear memory mapping which uses large page
* mappings on applicable archs.
*/
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(__per_cpu_offset);
static void * __init pcpu_dfl_fc_alloc(unsigned int cpu, size_t size,
size_t align)
{
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:08:04 +08:00
return memblock_alloc_from_nopanic(
size, align, __pa(MAX_DMA_ADDRESS));
}
static void __init pcpu_dfl_fc_free(void *ptr, size_t size)
{
memblock_free_early(__pa(ptr), size);
}
percpu: use dynamic percpu allocator as the default percpu allocator This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu>
2009-03-30 18:07:44 +08:00
void __init setup_per_cpu_areas(void)
{
unsigned long delta;
unsigned int cpu;
int rc;
percpu: use dynamic percpu allocator as the default percpu allocator This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu>
2009-03-30 18:07:44 +08:00
/*
* Always reserve area for module percpu variables. That's
* what the legacy allocator did.
*/
rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
PERCPU_DYNAMIC_RESERVE, PAGE_SIZE, NULL,
pcpu_dfl_fc_alloc, pcpu_dfl_fc_free);
if (rc < 0)
panic("Failed to initialize percpu areas.");
percpu: use dynamic percpu allocator as the default percpu allocator This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu>
2009-03-30 18:07:44 +08:00
delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
for_each_possible_cpu(cpu)
__per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
}
#endif /* CONFIG_HAVE_SETUP_PER_CPU_AREA */
#else /* CONFIG_SMP */
/*
* UP percpu area setup.
*
* UP always uses km-based percpu allocator with identity mapping.
* Static percpu variables are indistinguishable from the usual static
* variables and don't require any special preparation.
*/
void __init setup_per_cpu_areas(void)
{
const size_t unit_size =
roundup_pow_of_two(max_t(size_t, PCPU_MIN_UNIT_SIZE,
PERCPU_DYNAMIC_RESERVE));
struct pcpu_alloc_info *ai;
void *fc;
ai = pcpu_alloc_alloc_info(1, 1);
memblock: remove _virt from APIs returning virtual address The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:08:04 +08:00
fc = memblock_alloc_from_nopanic(unit_size,
PAGE_SIZE,
__pa(MAX_DMA_ADDRESS));
if (!ai || !fc)
panic("Failed to allocate memory for percpu areas.");
/* kmemleak tracks the percpu allocations separately */
kmemleak_free(fc);
ai->dyn_size = unit_size;
ai->unit_size = unit_size;
ai->atom_size = unit_size;
ai->alloc_size = unit_size;
ai->groups[0].nr_units = 1;
ai->groups[0].cpu_map[0] = 0;
if (pcpu_setup_first_chunk(ai, fc) < 0)
panic("Failed to initialize percpu areas.");
pcpu_free_alloc_info(ai);
}
#endif /* CONFIG_SMP */
/proc/meminfo: add percpu populated pages count Currently, percpu memory only exposes allocation and utilization information via debugfs. This more or less is only really useful for understanding the fragmentation and allocation information at a per-chunk level with a few global counters. This is also gated behind a config. BPF and cgroup, for example, have seen an increase in use causing increased use of percpu memory. Let's make it easier for someone to identify how much memory is being used. This patch adds the "Percpu" stat to meminfo to more easily look up how much percpu memory is in use. This number includes the cost for all allocated backing pages and not just insight at the per a unit, per chunk level. Metadata is excluded. I think excluding metadata is fair because the backing memory scales with the numbere of cpus and can quickly outweigh the metadata. It also makes this calculation light. Link: http://lkml.kernel.org/r/20180807184723.74919-1-dennisszhou@gmail.com Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 12:53:58 +08:00
/*
* pcpu_nr_pages - calculate total number of populated backing pages
*
* This reflects the number of pages populated to back chunks. Metadata is
* excluded in the number exposed in meminfo as the number of backing pages
* scales with the number of cpus and can quickly outweigh the memory used for
* metadata. It also keeps this calculation nice and simple.
*
* RETURNS:
* Total number of populated backing pages in use by the allocator.
*/
unsigned long pcpu_nr_pages(void)
{
return pcpu_nr_populated * pcpu_nr_units;
}
/*
* Percpu allocator is initialized early during boot when neither slab or
* workqueue is available. Plug async management until everything is up
* and running.
*/
static int __init percpu_enable_async(void)
{
pcpu_async_enabled = true;
return 0;
}
subsys_initcall(percpu_enable_async);