OpenCloudOS-Kernel/net/wireless/core.c

639 lines
15 KiB
C
Raw Normal View History

/*
* This is the linux wireless configuration interface.
*
* Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net>
*/
#include <linux/if.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/nl80211.h>
#include <linux/debugfs.h>
#include <linux/notifier.h>
#include <linux/device.h>
#include <linux/rtnetlink.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include "nl80211.h"
#include "core.h"
#include "sysfs.h"
#include "debugfs.h"
/* name for sysfs, %d is appended */
#define PHY_NAME "phy"
MODULE_AUTHOR("Johannes Berg");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("wireless configuration support");
/* RCU might be appropriate here since we usually
* only read the list, and that can happen quite
* often because we need to do it for each command */
LIST_HEAD(cfg80211_drv_list);
/*
* This is used to protect the cfg80211_drv_list, cfg80211_regdomain,
* country_ie_regdomain, the reg_beacon_list and the the last regulatory
* request receipt (last_request).
*/
DEFINE_MUTEX(cfg80211_mutex);
/* for debugfs */
static struct dentry *ieee80211_debugfs_dir;
/* requires cfg80211_mutex to be held! */
struct cfg80211_registered_device *cfg80211_drv_by_wiphy_idx(int wiphy_idx)
{
struct cfg80211_registered_device *result = NULL, *drv;
if (!wiphy_idx_valid(wiphy_idx))
return NULL;
assert_cfg80211_lock();
list_for_each_entry(drv, &cfg80211_drv_list, list) {
if (drv->wiphy_idx == wiphy_idx) {
result = drv;
break;
}
}
return result;
}
int get_wiphy_idx(struct wiphy *wiphy)
{
struct cfg80211_registered_device *drv;
if (!wiphy)
return WIPHY_IDX_STALE;
drv = wiphy_to_dev(wiphy);
return drv->wiphy_idx;
}
/* requires cfg80211_drv_mutex to be held! */
struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
{
struct cfg80211_registered_device *drv;
if (!wiphy_idx_valid(wiphy_idx))
return NULL;
assert_cfg80211_lock();
drv = cfg80211_drv_by_wiphy_idx(wiphy_idx);
if (!drv)
return NULL;
return &drv->wiphy;
}
/* requires cfg80211_mutex to be held! */
struct cfg80211_registered_device *
__cfg80211_drv_from_info(struct genl_info *info)
{
int ifindex;
struct cfg80211_registered_device *bywiphyidx = NULL, *byifidx = NULL;
struct net_device *dev;
int err = -EINVAL;
assert_cfg80211_lock();
if (info->attrs[NL80211_ATTR_WIPHY]) {
bywiphyidx = cfg80211_drv_by_wiphy_idx(
nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
err = -ENODEV;
}
if (info->attrs[NL80211_ATTR_IFINDEX]) {
ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
dev = dev_get_by_index(&init_net, ifindex);
if (dev) {
if (dev->ieee80211_ptr)
byifidx =
wiphy_to_dev(dev->ieee80211_ptr->wiphy);
dev_put(dev);
}
err = -ENODEV;
}
if (bywiphyidx && byifidx) {
if (bywiphyidx != byifidx)
return ERR_PTR(-EINVAL);
else
return bywiphyidx; /* == byifidx */
}
if (bywiphyidx)
return bywiphyidx;
if (byifidx)
return byifidx;
return ERR_PTR(err);
}
struct cfg80211_registered_device *
cfg80211_get_dev_from_info(struct genl_info *info)
{
struct cfg80211_registered_device *drv;
mutex_lock(&cfg80211_mutex);
drv = __cfg80211_drv_from_info(info);
/* if it is not an error we grab the lock on
* it to assure it won't be going away while
* we operate on it */
if (!IS_ERR(drv))
mutex_lock(&drv->mtx);
mutex_unlock(&cfg80211_mutex);
return drv;
}
struct cfg80211_registered_device *
cfg80211_get_dev_from_ifindex(int ifindex)
{
struct cfg80211_registered_device *drv = ERR_PTR(-ENODEV);
struct net_device *dev;
mutex_lock(&cfg80211_mutex);
dev = dev_get_by_index(&init_net, ifindex);
if (!dev)
goto out;
if (dev->ieee80211_ptr) {
drv = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
mutex_lock(&drv->mtx);
} else
drv = ERR_PTR(-ENODEV);
dev_put(dev);
out:
mutex_unlock(&cfg80211_mutex);
return drv;
}
void cfg80211_put_dev(struct cfg80211_registered_device *drv)
{
BUG_ON(IS_ERR(drv));
mutex_unlock(&drv->mtx);
}
/* requires cfg80211_mutex to be held */
int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
char *newname)
{
struct cfg80211_registered_device *drv;
int wiphy_idx, taken = -1, result, digits;
assert_cfg80211_lock();
/* prohibit calling the thing phy%d when %d is not its number */
sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {
/* count number of places needed to print wiphy_idx */
digits = 1;
while (wiphy_idx /= 10)
digits++;
/*
* deny the name if it is phy<idx> where <idx> is printed
* without leading zeroes. taken == strlen(newname) here
*/
if (taken == strlen(PHY_NAME) + digits)
return -EINVAL;
}
/* Ignore nop renames */
if (strcmp(newname, dev_name(&rdev->wiphy.dev)) == 0)
return 0;
/* Ensure another device does not already have this name. */
list_for_each_entry(drv, &cfg80211_drv_list, list)
if (strcmp(newname, dev_name(&drv->wiphy.dev)) == 0)
return -EINVAL;
result = device_rename(&rdev->wiphy.dev, newname);
if (result)
return result;
if (rdev->wiphy.debugfsdir &&
!debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
rdev->wiphy.debugfsdir,
rdev->wiphy.debugfsdir->d_parent,
newname))
printk(KERN_ERR "cfg80211: failed to rename debugfs dir to %s!\n",
newname);
nl80211_notify_dev_rename(rdev);
return 0;
}
static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
{
struct cfg80211_registered_device *drv = data;
drv->ops->rfkill_poll(&drv->wiphy);
}
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
struct cfg80211_registered_device *drv = data;
struct wireless_dev *wdev;
if (!blocked)
return 0;
rtnl_lock();
mutex_lock(&drv->devlist_mtx);
list_for_each_entry(wdev, &drv->netdev_list, list)
dev_close(wdev->netdev);
mutex_unlock(&drv->devlist_mtx);
rtnl_unlock();
return 0;
}
static void cfg80211_rfkill_sync_work(struct work_struct *work)
{
struct cfg80211_registered_device *drv;
drv = container_of(work, struct cfg80211_registered_device, rfkill_sync);
cfg80211_rfkill_set_block(drv, rfkill_blocked(drv->rfkill));
}
/* exported functions */
struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
{
static int wiphy_counter;
struct cfg80211_registered_device *drv;
int alloc_size;
WARN_ON(!ops->add_key && ops->del_key);
WARN_ON(ops->add_key && !ops->del_key);
alloc_size = sizeof(*drv) + sizeof_priv;
drv = kzalloc(alloc_size, GFP_KERNEL);
if (!drv)
return NULL;
drv->ops = ops;
mutex_lock(&cfg80211_mutex);
drv->wiphy_idx = wiphy_counter++;
if (unlikely(!wiphy_idx_valid(drv->wiphy_idx))) {
wiphy_counter--;
mutex_unlock(&cfg80211_mutex);
/* ugh, wrapped! */
kfree(drv);
return NULL;
}
mutex_unlock(&cfg80211_mutex);
/* give it a proper name */
dev_set_name(&drv->wiphy.dev, PHY_NAME "%d", drv->wiphy_idx);
mutex_init(&drv->mtx);
mutex_init(&drv->devlist_mtx);
INIT_LIST_HEAD(&drv->netdev_list);
spin_lock_init(&drv->bss_lock);
INIT_LIST_HEAD(&drv->bss_list);
device_initialize(&drv->wiphy.dev);
drv->wiphy.dev.class = &ieee80211_class;
drv->wiphy.dev.platform_data = drv;
drv->rfkill_ops.set_block = cfg80211_rfkill_set_block;
drv->rfkill = rfkill_alloc(dev_name(&drv->wiphy.dev),
&drv->wiphy.dev, RFKILL_TYPE_WLAN,
&drv->rfkill_ops, drv);
if (!drv->rfkill) {
kfree(drv);
return NULL;
}
INIT_WORK(&drv->rfkill_sync, cfg80211_rfkill_sync_work);
/*
* Initialize wiphy parameters to IEEE 802.11 MIB default values.
* Fragmentation and RTS threshold are disabled by default with the
* special -1 value.
*/
drv->wiphy.retry_short = 7;
drv->wiphy.retry_long = 4;
drv->wiphy.frag_threshold = (u32) -1;
drv->wiphy.rts_threshold = (u32) -1;
return &drv->wiphy;
}
EXPORT_SYMBOL(wiphy_new);
int wiphy_register(struct wiphy *wiphy)
{
struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
int res;
enum ieee80211_band band;
struct ieee80211_supported_band *sband;
bool have_band = false;
int i;
u16 ifmodes = wiphy->interface_modes;
if (WARN_ON(wiphy->max_scan_ssids < 1))
return -EINVAL;
/* sanity check ifmodes */
WARN_ON(!ifmodes);
ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
if (WARN_ON(ifmodes != wiphy->interface_modes))
wiphy->interface_modes = ifmodes;
/* sanity check supported bands/channels */
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
sband = wiphy->bands[band];
if (!sband)
continue;
sband->band = band;
if (WARN_ON(!sband->n_channels || !sband->n_bitrates))
return -EINVAL;
/*
* Since we use a u32 for rate bitmaps in
* ieee80211_get_response_rate, we cannot
* have more than 32 legacy rates.
*/
if (WARN_ON(sband->n_bitrates > 32))
return -EINVAL;
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
sband->channels[i].flags;
sband->channels[i].orig_mag =
sband->channels[i].max_antenna_gain;
sband->channels[i].orig_mpwr =
sband->channels[i].max_power;
sband->channels[i].band = band;
}
have_band = true;
}
if (!have_band) {
WARN_ON(1);
return -EINVAL;
}
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
res = device_add(&drv->wiphy.dev);
if (res)
return res;
res = rfkill_register(drv->rfkill);
if (res)
goto out_rm_dev;
mutex_lock(&cfg80211_mutex);
/* set up regulatory info */
wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
list_add(&drv->list, &cfg80211_drv_list);
mutex_unlock(&cfg80211_mutex);
/* add to debugfs */
drv->wiphy.debugfsdir =
debugfs_create_dir(wiphy_name(&drv->wiphy),
ieee80211_debugfs_dir);
if (IS_ERR(drv->wiphy.debugfsdir))
drv->wiphy.debugfsdir = NULL;
if (wiphy->custom_regulatory) {
struct regulatory_request request;
request.wiphy_idx = get_wiphy_idx(wiphy);
request.initiator = NL80211_REGDOM_SET_BY_DRIVER;
request.alpha2[0] = '9';
request.alpha2[1] = '9';
nl80211_send_reg_change_event(&request);
}
cfg80211_debugfs_drv_add(drv);
return 0;
out_rm_dev:
device_del(&drv->wiphy.dev);
return res;
}
EXPORT_SYMBOL(wiphy_register);
void wiphy_rfkill_start_polling(struct wiphy *wiphy)
{
struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
if (!drv->ops->rfkill_poll)
return;
drv->rfkill_ops.poll = cfg80211_rfkill_poll;
rfkill_resume_polling(drv->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_start_polling);
void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
{
struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
rfkill_pause_polling(drv->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
void wiphy_unregister(struct wiphy *wiphy)
{
struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
rfkill_unregister(drv->rfkill);
/* protect the device list */
mutex_lock(&cfg80211_mutex);
BUG_ON(!list_empty(&drv->netdev_list));
/*
* Try to grab drv->mtx. If a command is still in progress,
* hopefully the driver will refuse it since it's tearing
* down the device already. We wait for this command to complete
* before unlinking the item from the list.
* Note: as codified by the BUG_ON above we cannot get here if
* a virtual interface is still associated. Hence, we can only
* get to lock contention here if userspace issues a command
* that identified the hardware by wiphy index.
*/
mutex_lock(&drv->mtx);
/* unlock again before freeing */
mutex_unlock(&drv->mtx);
cfg80211_debugfs_drv_del(drv);
/* If this device got a regulatory hint tell core its
* free to listen now to a new shiny device regulatory hint */
reg_device_remove(wiphy);
list_del(&drv->list);
device_del(&drv->wiphy.dev);
debugfs_remove(drv->wiphy.debugfsdir);
mutex_unlock(&cfg80211_mutex);
}
EXPORT_SYMBOL(wiphy_unregister);
void cfg80211_dev_free(struct cfg80211_registered_device *drv)
{
struct cfg80211_internal_bss *scan, *tmp;
rfkill_destroy(drv->rfkill);
mutex_destroy(&drv->mtx);
mutex_destroy(&drv->devlist_mtx);
list_for_each_entry_safe(scan, tmp, &drv->bss_list, list)
cfg80211_put_bss(&scan->pub);
kfree(drv);
}
void wiphy_free(struct wiphy *wiphy)
{
put_device(&wiphy->dev);
}
EXPORT_SYMBOL(wiphy_free);
void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
{
struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
if (rfkill_set_hw_state(drv->rfkill, blocked))
schedule_work(&drv->rfkill_sync);
}
EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
unsigned long state,
void *ndev)
{
struct net_device *dev = ndev;
struct cfg80211_registered_device *rdev;
if (!dev->ieee80211_ptr)
return NOTIFY_DONE;
rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
WARN_ON(dev->ieee80211_ptr->iftype == NL80211_IFTYPE_UNSPECIFIED);
switch (state) {
case NETDEV_REGISTER:
mutex_lock(&rdev->devlist_mtx);
list_add(&dev->ieee80211_ptr->list, &rdev->netdev_list);
if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
"phy80211")) {
printk(KERN_ERR "wireless: failed to add phy80211 "
"symlink to netdev!\n");
}
dev->ieee80211_ptr->netdev = dev;
#ifdef CONFIG_WIRELESS_EXT
dev->ieee80211_ptr->wext.default_key = -1;
dev->ieee80211_ptr->wext.default_mgmt_key = -1;
#endif
mutex_unlock(&rdev->devlist_mtx);
break;
case NETDEV_GOING_DOWN:
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
break;
if (!dev->ieee80211_ptr->ssid_len)
break;
cfg80211_leave_ibss(rdev, dev, true);
break;
case NETDEV_UP:
#ifdef CONFIG_WIRELESS_EXT
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC)
break;
if (!dev->ieee80211_ptr->wext.ibss.ssid_len)
break;
cfg80211_join_ibss(rdev, dev, &dev->ieee80211_ptr->wext.ibss);
break;
#endif
case NETDEV_UNREGISTER:
mutex_lock(&rdev->devlist_mtx);
if (!list_empty(&dev->ieee80211_ptr->list)) {
sysfs_remove_link(&dev->dev.kobj, "phy80211");
list_del_init(&dev->ieee80211_ptr->list);
}
mutex_unlock(&rdev->devlist_mtx);
break;
case NETDEV_PRE_UP:
if (rfkill_blocked(rdev->rfkill))
return notifier_from_errno(-ERFKILL);
break;
}
return NOTIFY_DONE;
}
static struct notifier_block cfg80211_netdev_notifier = {
.notifier_call = cfg80211_netdev_notifier_call,
};
static int cfg80211_init(void)
{
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
int err;
err = wiphy_sysfs_init();
if (err)
goto out_fail_sysfs;
err = register_netdevice_notifier(&cfg80211_netdev_notifier);
if (err)
goto out_fail_notifier;
err = nl80211_init();
if (err)
goto out_fail_nl80211;
ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
err = regulatory_init();
if (err)
goto out_fail_reg;
return 0;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
out_fail_reg:
debugfs_remove(ieee80211_debugfs_dir);
out_fail_nl80211:
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
out_fail_notifier:
wiphy_sysfs_exit();
out_fail_sysfs:
return err;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
subsys_initcall(cfg80211_init);
static void cfg80211_exit(void)
{
debugfs_remove(ieee80211_debugfs_dir);
nl80211_exit();
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
wiphy_sysfs_exit();
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
regulatory_exit();
}
module_exit(cfg80211_exit);