OpenCloudOS-Kernel/kernel/time/tick-internal.h

167 lines
6.9 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* tick internal variable and functions used by low/high res code
*/
#include <linux/hrtimer.h>
#include <linux/tick.h>
#include "timekeeping.h"
#include "tick-sched.h"
#ifdef CONFIG_GENERIC_CLOCKEVENTS
# define TICK_DO_TIMER_NONE -1
# define TICK_DO_TIMER_BOOT -2
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
extern ktime_t tick_next_period;
extern ktime_t tick_period;
extern int tick_do_timer_cpu __read_mostly;
extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast);
extern void tick_handle_periodic(struct clock_event_device *dev);
extern void tick_check_new_device(struct clock_event_device *dev);
extern void tick_shutdown(unsigned int cpu);
extern void tick_suspend(void);
extern void tick_resume(void);
extern bool tick_check_replacement(struct clock_event_device *curdev,
struct clock_event_device *newdev);
extern void tick_install_replacement(struct clock_event_device *dev);
extern int tick_is_oneshot_available(void);
extern struct tick_device *tick_get_device(int cpu);
extern int clockevents_tick_resume(struct clock_event_device *dev);
/* Check, if the device is functional or a dummy for broadcast */
static inline int tick_device_is_functional(struct clock_event_device *dev)
{
return !(dev->features & CLOCK_EVT_FEAT_DUMMY);
}
static inline enum clock_event_state clockevent_get_state(struct clock_event_device *dev)
{
return dev->state_use_accessors;
}
static inline void clockevent_set_state(struct clock_event_device *dev,
enum clock_event_state state)
{
dev->state_use_accessors = state;
}
extern void clockevents_shutdown(struct clock_event_device *dev);
extern void clockevents_exchange_device(struct clock_event_device *old,
struct clock_event_device *new);
extern void clockevents_switch_state(struct clock_event_device *dev,
enum clock_event_state state);
extern int clockevents_program_event(struct clock_event_device *dev,
ktime_t expires, bool force);
extern void clockevents_handle_noop(struct clock_event_device *dev);
extern int __clockevents_update_freq(struct clock_event_device *dev, u32 freq);
extern ssize_t sysfs_get_uname(const char *buf, char *dst, size_t cnt);
/* Broadcasting support */
# ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
extern int tick_device_uses_broadcast(struct clock_event_device *dev, int cpu);
extern void tick_install_broadcast_device(struct clock_event_device *dev);
extern int tick_is_broadcast_device(struct clock_event_device *dev);
extern void tick_shutdown_broadcast(unsigned int cpu);
extern void tick_suspend_broadcast(void);
extern void tick_resume_broadcast(void);
extern bool tick_resume_check_broadcast(void);
extern void tick_broadcast_init(void);
extern void tick_set_periodic_handler(struct clock_event_device *dev, int broadcast);
extern int tick_broadcast_update_freq(struct clock_event_device *dev, u32 freq);
extern struct tick_device *tick_get_broadcast_device(void);
extern struct cpumask *tick_get_broadcast_mask(void);
# else /* !CONFIG_GENERIC_CLOCKEVENTS_BROADCAST: */
static inline void tick_install_broadcast_device(struct clock_event_device *dev) { }
static inline int tick_is_broadcast_device(struct clock_event_device *dev) { return 0; }
static inline int tick_device_uses_broadcast(struct clock_event_device *dev, int cpu) { return 0; }
static inline void tick_do_periodic_broadcast(struct clock_event_device *d) { }
static inline void tick_shutdown_broadcast(unsigned int cpu) { }
static inline void tick_suspend_broadcast(void) { }
static inline void tick_resume_broadcast(void) { }
static inline bool tick_resume_check_broadcast(void) { return false; }
static inline void tick_broadcast_init(void) { }
static inline int tick_broadcast_update_freq(struct clock_event_device *dev, u32 freq) { return -ENODEV; }
/* Set the periodic handler in non broadcast mode */
static inline void tick_set_periodic_handler(struct clock_event_device *dev, int broadcast)
{
dev->event_handler = tick_handle_periodic;
}
# endif /* !CONFIG_GENERIC_CLOCKEVENTS_BROADCAST */
#else /* !GENERIC_CLOCKEVENTS: */
static inline void tick_suspend(void) { }
static inline void tick_resume(void) { }
#endif /* !GENERIC_CLOCKEVENTS */
/* Oneshot related functions */
#ifdef CONFIG_TICK_ONESHOT
extern void tick_setup_oneshot(struct clock_event_device *newdev,
void (*handler)(struct clock_event_device *),
ktime_t nextevt);
extern int tick_program_event(ktime_t expires, int force);
extern void tick_oneshot_notify(void);
extern int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *));
extern void tick_resume_oneshot(void);
static inline bool tick_oneshot_possible(void) { return true; }
extern int tick_oneshot_mode_active(void);
extern void tick_clock_notify(void);
extern int tick_check_oneshot_change(int allow_nohz);
extern int tick_init_highres(void);
#else /* !CONFIG_TICK_ONESHOT: */
static inline
void tick_setup_oneshot(struct clock_event_device *newdev,
void (*handler)(struct clock_event_device *),
ktime_t nextevt) { BUG(); }
static inline void tick_resume_oneshot(void) { BUG(); }
static inline int tick_program_event(ktime_t expires, int force) { return 0; }
static inline void tick_oneshot_notify(void) { }
static inline bool tick_oneshot_possible(void) { return false; }
static inline int tick_oneshot_mode_active(void) { return 0; }
static inline void tick_clock_notify(void) { }
static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
#endif /* !CONFIG_TICK_ONESHOT */
/* Functions related to oneshot broadcasting */
#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) && defined(CONFIG_TICK_ONESHOT)
extern void tick_broadcast_switch_to_oneshot(void);
extern void tick_shutdown_broadcast_oneshot(unsigned int cpu);
extern int tick_broadcast_oneshot_active(void);
extern void tick_check_oneshot_broadcast_this_cpu(void);
bool tick_broadcast_oneshot_available(void);
extern struct cpumask *tick_get_broadcast_oneshot_mask(void);
#else /* !(BROADCAST && ONESHOT): */
static inline void tick_broadcast_switch_to_oneshot(void) { }
static inline void tick_shutdown_broadcast_oneshot(unsigned int cpu) { }
static inline int tick_broadcast_oneshot_active(void) { return 0; }
static inline void tick_check_oneshot_broadcast_this_cpu(void) { }
static inline bool tick_broadcast_oneshot_available(void) { return tick_oneshot_possible(); }
#endif /* !(BROADCAST && ONESHOT) */
/* NO_HZ_FULL internal */
#ifdef CONFIG_NO_HZ_FULL
extern void tick_nohz_init(void);
# else
static inline void tick_nohz_init(void) { }
#endif
timer: Reduce timer migration overhead if disabled Eric reported that the timer_migration sysctl is not really nice performance wise as it needs to check at every timer insertion whether the feature is enabled or not. Further the check does not live in the timer code, so we have an extra function call which checks an extra cache line to figure out that it is disabled. We can do better and store that information in the per cpu (hr)timer bases. I pondered to use a static key, but that's a nightmare to update from the nohz code and the timer base cache line is hot anyway when we select a timer base. The old logic enabled the timer migration unconditionally if CONFIG_NO_HZ was set even if nohz was disabled on the kernel command line. With this modification, we start off with migration disabled. The user visible sysctl is still set to enabled. If the kernel switches to NOHZ migration is enabled, if the user did not disable it via the sysctl prior to the switch. If nohz=off is on the kernel command line, migration stays disabled no matter what. Before: 47.76% hog [.] main 14.84% [kernel] [k] _raw_spin_lock_irqsave 9.55% [kernel] [k] _raw_spin_unlock_irqrestore 6.71% [kernel] [k] mod_timer 6.24% [kernel] [k] lock_timer_base.isra.38 3.76% [kernel] [k] detach_if_pending 3.71% [kernel] [k] del_timer 2.50% [kernel] [k] internal_add_timer 1.51% [kernel] [k] get_nohz_timer_target 1.28% [kernel] [k] __internal_add_timer 0.78% [kernel] [k] timerfn 0.48% [kernel] [k] wake_up_nohz_cpu After: 48.10% hog [.] main 15.25% [kernel] [k] _raw_spin_lock_irqsave 9.76% [kernel] [k] _raw_spin_unlock_irqrestore 6.50% [kernel] [k] mod_timer 6.44% [kernel] [k] lock_timer_base.isra.38 3.87% [kernel] [k] detach_if_pending 3.80% [kernel] [k] del_timer 2.67% [kernel] [k] internal_add_timer 1.33% [kernel] [k] __internal_add_timer 0.73% [kernel] [k] timerfn 0.54% [kernel] [k] wake_up_nohz_cpu Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Joonwoo Park <joonwoop@codeaurora.org> Cc: Wenbo Wang <wenbo.wang@memblaze.com> Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-27 06:50:33 +08:00
#ifdef CONFIG_NO_HZ_COMMON
extern unsigned long tick_nohz_active;
#else
#define tick_nohz_active (0)
#endif
#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
timer: Minimize nohz off overhead If nohz is disabled on the kernel command line the [hr]timer code still calls wake_up_nohz_cpu() and tick_nohz_full_cpu(), a pretty pointless exercise. Cache nohz_active in [hr]timer per cpu bases and avoid the overhead. Before: 48.10% hog [.] main 15.25% [kernel] [k] _raw_spin_lock_irqsave 9.76% [kernel] [k] _raw_spin_unlock_irqrestore 6.50% [kernel] [k] mod_timer 6.44% [kernel] [k] lock_timer_base.isra.38 3.87% [kernel] [k] detach_if_pending 3.80% [kernel] [k] del_timer 2.67% [kernel] [k] internal_add_timer 1.33% [kernel] [k] __internal_add_timer 0.73% [kernel] [k] timerfn 0.54% [kernel] [k] wake_up_nohz_cpu After: 48.73% hog [.] main 15.36% [kernel] [k] _raw_spin_lock_irqsave 9.77% [kernel] [k] _raw_spin_unlock_irqrestore 6.61% [kernel] [k] lock_timer_base.isra.38 6.42% [kernel] [k] mod_timer 3.90% [kernel] [k] detach_if_pending 3.76% [kernel] [k] del_timer 2.41% [kernel] [k] internal_add_timer 1.39% [kernel] [k] __internal_add_timer 0.76% [kernel] [k] timerfn We probably should have a cached value for nohz full in the per cpu bases as well to avoid the cpumask check. The base cache line is hot already, the cpumask not necessarily. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Joonwoo Park <joonwoop@codeaurora.org> Cc: Wenbo Wang <wenbo.wang@memblaze.com> Link: http://lkml.kernel.org/r/20150526224512.207378134@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-27 06:50:35 +08:00
extern void timers_update_migration(bool update_nohz);
timer: Reduce timer migration overhead if disabled Eric reported that the timer_migration sysctl is not really nice performance wise as it needs to check at every timer insertion whether the feature is enabled or not. Further the check does not live in the timer code, so we have an extra function call which checks an extra cache line to figure out that it is disabled. We can do better and store that information in the per cpu (hr)timer bases. I pondered to use a static key, but that's a nightmare to update from the nohz code and the timer base cache line is hot anyway when we select a timer base. The old logic enabled the timer migration unconditionally if CONFIG_NO_HZ was set even if nohz was disabled on the kernel command line. With this modification, we start off with migration disabled. The user visible sysctl is still set to enabled. If the kernel switches to NOHZ migration is enabled, if the user did not disable it via the sysctl prior to the switch. If nohz=off is on the kernel command line, migration stays disabled no matter what. Before: 47.76% hog [.] main 14.84% [kernel] [k] _raw_spin_lock_irqsave 9.55% [kernel] [k] _raw_spin_unlock_irqrestore 6.71% [kernel] [k] mod_timer 6.24% [kernel] [k] lock_timer_base.isra.38 3.76% [kernel] [k] detach_if_pending 3.71% [kernel] [k] del_timer 2.50% [kernel] [k] internal_add_timer 1.51% [kernel] [k] get_nohz_timer_target 1.28% [kernel] [k] __internal_add_timer 0.78% [kernel] [k] timerfn 0.48% [kernel] [k] wake_up_nohz_cpu After: 48.10% hog [.] main 15.25% [kernel] [k] _raw_spin_lock_irqsave 9.76% [kernel] [k] _raw_spin_unlock_irqrestore 6.50% [kernel] [k] mod_timer 6.44% [kernel] [k] lock_timer_base.isra.38 3.87% [kernel] [k] detach_if_pending 3.80% [kernel] [k] del_timer 2.67% [kernel] [k] internal_add_timer 1.33% [kernel] [k] __internal_add_timer 0.73% [kernel] [k] timerfn 0.54% [kernel] [k] wake_up_nohz_cpu Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Joonwoo Park <joonwoop@codeaurora.org> Cc: Wenbo Wang <wenbo.wang@memblaze.com> Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-27 06:50:33 +08:00
#else
timer: Minimize nohz off overhead If nohz is disabled on the kernel command line the [hr]timer code still calls wake_up_nohz_cpu() and tick_nohz_full_cpu(), a pretty pointless exercise. Cache nohz_active in [hr]timer per cpu bases and avoid the overhead. Before: 48.10% hog [.] main 15.25% [kernel] [k] _raw_spin_lock_irqsave 9.76% [kernel] [k] _raw_spin_unlock_irqrestore 6.50% [kernel] [k] mod_timer 6.44% [kernel] [k] lock_timer_base.isra.38 3.87% [kernel] [k] detach_if_pending 3.80% [kernel] [k] del_timer 2.67% [kernel] [k] internal_add_timer 1.33% [kernel] [k] __internal_add_timer 0.73% [kernel] [k] timerfn 0.54% [kernel] [k] wake_up_nohz_cpu After: 48.73% hog [.] main 15.36% [kernel] [k] _raw_spin_lock_irqsave 9.77% [kernel] [k] _raw_spin_unlock_irqrestore 6.61% [kernel] [k] lock_timer_base.isra.38 6.42% [kernel] [k] mod_timer 3.90% [kernel] [k] detach_if_pending 3.76% [kernel] [k] del_timer 2.41% [kernel] [k] internal_add_timer 1.39% [kernel] [k] __internal_add_timer 0.76% [kernel] [k] timerfn We probably should have a cached value for nohz full in the per cpu bases as well to avoid the cpumask check. The base cache line is hot already, the cpumask not necessarily. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Joonwoo Park <joonwoop@codeaurora.org> Cc: Wenbo Wang <wenbo.wang@memblaze.com> Link: http://lkml.kernel.org/r/20150526224512.207378134@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-27 06:50:35 +08:00
static inline void timers_update_migration(bool update_nohz) { }
timer: Reduce timer migration overhead if disabled Eric reported that the timer_migration sysctl is not really nice performance wise as it needs to check at every timer insertion whether the feature is enabled or not. Further the check does not live in the timer code, so we have an extra function call which checks an extra cache line to figure out that it is disabled. We can do better and store that information in the per cpu (hr)timer bases. I pondered to use a static key, but that's a nightmare to update from the nohz code and the timer base cache line is hot anyway when we select a timer base. The old logic enabled the timer migration unconditionally if CONFIG_NO_HZ was set even if nohz was disabled on the kernel command line. With this modification, we start off with migration disabled. The user visible sysctl is still set to enabled. If the kernel switches to NOHZ migration is enabled, if the user did not disable it via the sysctl prior to the switch. If nohz=off is on the kernel command line, migration stays disabled no matter what. Before: 47.76% hog [.] main 14.84% [kernel] [k] _raw_spin_lock_irqsave 9.55% [kernel] [k] _raw_spin_unlock_irqrestore 6.71% [kernel] [k] mod_timer 6.24% [kernel] [k] lock_timer_base.isra.38 3.76% [kernel] [k] detach_if_pending 3.71% [kernel] [k] del_timer 2.50% [kernel] [k] internal_add_timer 1.51% [kernel] [k] get_nohz_timer_target 1.28% [kernel] [k] __internal_add_timer 0.78% [kernel] [k] timerfn 0.48% [kernel] [k] wake_up_nohz_cpu After: 48.10% hog [.] main 15.25% [kernel] [k] _raw_spin_lock_irqsave 9.76% [kernel] [k] _raw_spin_unlock_irqrestore 6.50% [kernel] [k] mod_timer 6.44% [kernel] [k] lock_timer_base.isra.38 3.87% [kernel] [k] detach_if_pending 3.80% [kernel] [k] del_timer 2.67% [kernel] [k] internal_add_timer 1.33% [kernel] [k] __internal_add_timer 0.73% [kernel] [k] timerfn 0.54% [kernel] [k] wake_up_nohz_cpu Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Joonwoo Park <joonwoop@codeaurora.org> Cc: Wenbo Wang <wenbo.wang@memblaze.com> Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-27 06:50:33 +08:00
#endif
DECLARE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases);
extern u64 get_next_timer_interrupt(unsigned long basej, u64 basem);
void timer_clear_idle(void);