2012-04-02 23:14:32 +08:00
|
|
|
/*
|
|
|
|
|
* Fitipower FC0011 tuner driver
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2012 Michael Buesch <m@bues.ch>
|
|
|
|
|
*
|
|
|
|
|
* Derived from FC0012 tuner driver:
|
|
|
|
|
* Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include "fc0011.h"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Tuner registers */
|
|
|
|
|
enum {
|
|
|
|
|
FC11_REG_0,
|
|
|
|
|
FC11_REG_FA, /* FA */
|
|
|
|
|
FC11_REG_FP, /* FP */
|
|
|
|
|
FC11_REG_XINHI, /* XIN high 8 bit */
|
|
|
|
|
FC11_REG_XINLO, /* XIN low 8 bit */
|
|
|
|
|
FC11_REG_VCO, /* VCO */
|
|
|
|
|
FC11_REG_VCOSEL, /* VCO select */
|
|
|
|
|
FC11_REG_7, /* Unknown tuner reg 7 */
|
|
|
|
|
FC11_REG_8, /* Unknown tuner reg 8 */
|
|
|
|
|
FC11_REG_9,
|
|
|
|
|
FC11_REG_10, /* Unknown tuner reg 10 */
|
|
|
|
|
FC11_REG_11, /* Unknown tuner reg 11 */
|
|
|
|
|
FC11_REG_12,
|
|
|
|
|
FC11_REG_RCCAL, /* RC calibrate */
|
|
|
|
|
FC11_REG_VCOCAL, /* VCO calibrate */
|
|
|
|
|
FC11_REG_15,
|
|
|
|
|
FC11_REG_16, /* Unknown tuner reg 16 */
|
|
|
|
|
FC11_REG_17,
|
|
|
|
|
|
|
|
|
|
FC11_NR_REGS, /* Number of registers */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum FC11_REG_VCOSEL_bits {
|
|
|
|
|
FC11_VCOSEL_2 = 0x08, /* VCO select 2 */
|
|
|
|
|
FC11_VCOSEL_1 = 0x10, /* VCO select 1 */
|
|
|
|
|
FC11_VCOSEL_CLKOUT = 0x20, /* Fix clock out */
|
|
|
|
|
FC11_VCOSEL_BW7M = 0x40, /* 7MHz bw */
|
|
|
|
|
FC11_VCOSEL_BW6M = 0x80, /* 6MHz bw */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum FC11_REG_RCCAL_bits {
|
|
|
|
|
FC11_RCCAL_FORCE = 0x10, /* force */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum FC11_REG_VCOCAL_bits {
|
|
|
|
|
FC11_VCOCAL_RUN = 0, /* VCO calibration run */
|
|
|
|
|
FC11_VCOCAL_VALUEMASK = 0x3F, /* VCO calibration value mask */
|
|
|
|
|
FC11_VCOCAL_OK = 0x40, /* VCO calibration Ok */
|
|
|
|
|
FC11_VCOCAL_RESET = 0x80, /* VCO calibration reset */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
struct fc0011_priv {
|
|
|
|
|
struct i2c_adapter *i2c;
|
|
|
|
|
u8 addr;
|
|
|
|
|
|
|
|
|
|
u32 frequency;
|
|
|
|
|
u32 bandwidth;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int fc0011_writereg(struct fc0011_priv *priv, u8 reg, u8 val)
|
|
|
|
|
{
|
|
|
|
|
u8 buf[2] = { reg, val };
|
|
|
|
|
struct i2c_msg msg = { .addr = priv->addr,
|
|
|
|
|
.flags = 0, .buf = buf, .len = 2 };
|
|
|
|
|
|
|
|
|
|
if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
|
|
|
|
|
dev_err(&priv->i2c->dev,
|
|
|
|
|
"I2C write reg failed, reg: %02x, val: %02x\n",
|
|
|
|
|
reg, val);
|
|
|
|
|
return -EIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int fc0011_readreg(struct fc0011_priv *priv, u8 reg, u8 *val)
|
|
|
|
|
{
|
|
|
|
|
u8 dummy;
|
|
|
|
|
struct i2c_msg msg[2] = {
|
|
|
|
|
{ .addr = priv->addr,
|
|
|
|
|
.flags = 0, .buf = ®, .len = 1 },
|
|
|
|
|
{ .addr = priv->addr,
|
|
|
|
|
.flags = I2C_M_RD, .buf = val ? : &dummy, .len = 1 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
if (i2c_transfer(priv->i2c, msg, 2) != 2) {
|
|
|
|
|
dev_err(&priv->i2c->dev,
|
|
|
|
|
"I2C read failed, reg: %02x\n", reg);
|
|
|
|
|
return -EIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2016-11-19 06:30:51 +08:00
|
|
|
static void fc0011_release(struct dvb_frontend *fe)
|
|
|
|
|
{
|
|
|
|
|
kfree(fe->tuner_priv);
|
|
|
|
|
fe->tuner_priv = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
2012-04-02 23:14:32 +08:00
|
|
|
static int fc0011_init(struct dvb_frontend *fe)
|
|
|
|
|
{
|
|
|
|
|
struct fc0011_priv *priv = fe->tuner_priv;
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
if (WARN_ON(!fe->callback))
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
|
|
|
|
|
FC0011_FE_CALLBACK_POWER, priv->addr);
|
|
|
|
|
if (err) {
|
|
|
|
|
dev_err(&priv->i2c->dev, "Power-on callback failed\n");
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
|
|
|
|
|
FC0011_FE_CALLBACK_RESET, priv->addr);
|
|
|
|
|
if (err) {
|
|
|
|
|
dev_err(&priv->i2c->dev, "Reset callback failed\n");
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Initiate VCO calibration */
|
|
|
|
|
static int fc0011_vcocal_trigger(struct fc0011_priv *priv)
|
|
|
|
|
{
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Read VCO calibration value */
|
|
|
|
|
static int fc0011_vcocal_read(struct fc0011_priv *priv, u8 *value)
|
|
|
|
|
{
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
2012-04-03 16:08:45 +08:00
|
|
|
usleep_range(10000, 20000);
|
2012-04-02 23:14:32 +08:00
|
|
|
err = fc0011_readreg(priv, FC11_REG_VCOCAL, value);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int fc0011_set_params(struct dvb_frontend *fe)
|
|
|
|
|
{
|
|
|
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
|
|
|
struct fc0011_priv *priv = fe->tuner_priv;
|
|
|
|
|
int err;
|
|
|
|
|
unsigned int i, vco_retries;
|
|
|
|
|
u32 freq = p->frequency / 1000;
|
|
|
|
|
u32 bandwidth = p->bandwidth_hz / 1000;
|
2013-02-07 23:16:55 +08:00
|
|
|
u32 fvco, xin, frac, xdiv, xdivr;
|
2012-04-02 23:14:32 +08:00
|
|
|
u8 fa, fp, vco_sel, vco_cal;
|
|
|
|
|
u8 regs[FC11_NR_REGS] = { };
|
|
|
|
|
|
|
|
|
|
regs[FC11_REG_7] = 0x0F;
|
|
|
|
|
regs[FC11_REG_8] = 0x3E;
|
|
|
|
|
regs[FC11_REG_10] = 0xB8;
|
|
|
|
|
regs[FC11_REG_11] = 0x80;
|
|
|
|
|
regs[FC11_REG_RCCAL] = 0x04;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
|
|
/* Set VCO freq and VCO div */
|
|
|
|
|
if (freq < 54000) {
|
|
|
|
|
fvco = freq * 64;
|
|
|
|
|
regs[FC11_REG_VCO] = 0x82;
|
|
|
|
|
} else if (freq < 108000) {
|
|
|
|
|
fvco = freq * 32;
|
|
|
|
|
regs[FC11_REG_VCO] = 0x42;
|
|
|
|
|
} else if (freq < 216000) {
|
|
|
|
|
fvco = freq * 16;
|
|
|
|
|
regs[FC11_REG_VCO] = 0x22;
|
|
|
|
|
} else if (freq < 432000) {
|
|
|
|
|
fvco = freq * 8;
|
|
|
|
|
regs[FC11_REG_VCO] = 0x12;
|
|
|
|
|
} else {
|
|
|
|
|
fvco = freq * 4;
|
|
|
|
|
regs[FC11_REG_VCO] = 0x0A;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Calc XIN. The PLL reference frequency is 18 MHz. */
|
|
|
|
|
xdiv = fvco / 18000;
|
2013-02-07 23:19:30 +08:00
|
|
|
WARN_ON(xdiv > 0xFF);
|
2012-04-02 23:14:32 +08:00
|
|
|
frac = fvco - xdiv * 18000;
|
|
|
|
|
frac = (frac << 15) / 18000;
|
|
|
|
|
if (frac >= 16384)
|
|
|
|
|
frac += 32786;
|
|
|
|
|
if (!frac)
|
|
|
|
|
xin = 0;
|
|
|
|
|
else
|
2013-02-07 23:16:55 +08:00
|
|
|
xin = clamp_t(u32, frac, 512, 65024);
|
2012-04-02 23:14:32 +08:00
|
|
|
regs[FC11_REG_XINHI] = xin >> 8;
|
|
|
|
|
regs[FC11_REG_XINLO] = xin;
|
|
|
|
|
|
|
|
|
|
/* Calc FP and FA */
|
|
|
|
|
xdivr = xdiv;
|
|
|
|
|
if (fvco - xdiv * 18000 >= 9000)
|
|
|
|
|
xdivr += 1; /* round */
|
|
|
|
|
fp = xdivr / 8;
|
|
|
|
|
fa = xdivr - fp * 8;
|
|
|
|
|
if (fa < 2) {
|
|
|
|
|
fp -= 1;
|
|
|
|
|
fa += 8;
|
|
|
|
|
}
|
|
|
|
|
if (fp > 0x1F) {
|
2013-02-07 23:13:13 +08:00
|
|
|
fp = 0x1F;
|
|
|
|
|
fa = 0xF;
|
2012-04-02 23:14:32 +08:00
|
|
|
}
|
|
|
|
|
if (fa >= fp) {
|
|
|
|
|
dev_warn(&priv->i2c->dev,
|
|
|
|
|
"fa %02X >= fp %02X, but trying to continue\n",
|
|
|
|
|
(unsigned int)(u8)fa, (unsigned int)(u8)fp);
|
|
|
|
|
}
|
|
|
|
|
regs[FC11_REG_FA] = fa;
|
|
|
|
|
regs[FC11_REG_FP] = fp;
|
|
|
|
|
|
|
|
|
|
/* Select bandwidth */
|
|
|
|
|
switch (bandwidth) {
|
|
|
|
|
case 8000:
|
|
|
|
|
break;
|
|
|
|
|
case 7000:
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
[media] tuners: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:26 +08:00
|
|
|
dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. Using 6000 kHz.\n",
|
2012-04-02 23:14:32 +08:00
|
|
|
bandwidth);
|
|
|
|
|
bandwidth = 6000;
|
|
|
|
|
/* fallthrough */
|
|
|
|
|
case 6000:
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW6M;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Pre VCO select */
|
|
|
|
|
if (fvco < 2320000) {
|
|
|
|
|
vco_sel = 0;
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
} else if (fvco < 3080000) {
|
|
|
|
|
vco_sel = 1;
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
|
|
|
|
|
} else {
|
|
|
|
|
vco_sel = 2;
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Fix for low freqs */
|
|
|
|
|
if (freq < 45000) {
|
|
|
|
|
regs[FC11_REG_FA] = 0x6;
|
|
|
|
|
regs[FC11_REG_FP] = 0x11;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Clock out fix */
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_CLKOUT;
|
|
|
|
|
|
|
|
|
|
/* Write the cached registers */
|
|
|
|
|
for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) {
|
|
|
|
|
err = fc0011_writereg(priv, i, regs[i]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* VCO calibration */
|
|
|
|
|
err = fc0011_vcocal_trigger(priv);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
err = fc0011_vcocal_read(priv, &vco_cal);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
vco_retries = 0;
|
2012-04-03 16:05:03 +08:00
|
|
|
while (!(vco_cal & FC11_VCOCAL_OK) && vco_retries < 3) {
|
2012-04-02 23:14:32 +08:00
|
|
|
/* Reset the tuner and try again */
|
|
|
|
|
err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
|
|
|
|
|
FC0011_FE_CALLBACK_RESET, priv->addr);
|
|
|
|
|
if (err) {
|
|
|
|
|
dev_err(&priv->i2c->dev, "Failed to reset tuner\n");
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
/* Reinit tuner config */
|
|
|
|
|
err = 0;
|
|
|
|
|
for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++)
|
|
|
|
|
err |= fc0011_writereg(priv, i, regs[i]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
|
|
|
|
|
err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return -EIO;
|
|
|
|
|
/* VCO calibration */
|
|
|
|
|
err = fc0011_vcocal_trigger(priv);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
err = fc0011_vcocal_read(priv, &vco_cal);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
vco_retries++;
|
|
|
|
|
}
|
|
|
|
|
if (!(vco_cal & FC11_VCOCAL_OK)) {
|
|
|
|
|
dev_err(&priv->i2c->dev,
|
|
|
|
|
"Failed to read VCO calibration value (got %02X)\n",
|
|
|
|
|
(unsigned int)vco_cal);
|
|
|
|
|
return -EIO;
|
|
|
|
|
}
|
|
|
|
|
vco_cal &= FC11_VCOCAL_VALUEMASK;
|
|
|
|
|
|
|
|
|
|
switch (vco_sel) {
|
2013-02-07 23:19:30 +08:00
|
|
|
default:
|
|
|
|
|
WARN_ON(1);
|
media: tw5864, fc0011: better handle WARN_ON()
As such macro will check if the expression is true, it may fall through, as
warned:
In file included from ./include/uapi/linux/stddef.h:1:0,
from ./include/linux/stddef.h:4,
from ./include/uapi/linux/posix_types.h:4,
from ./include/uapi/linux/types.h:13,
from ./include/linux/types.h:5,
from ./drivers/media/dvb-core/dvb_frontend.h:35,
from drivers/media/tuners/fc0011.h:4,
from drivers/media/tuners/fc0011.c:20:
drivers/media/tuners/fc0011.c: In function 'fc0011_set_params':
./include/linux/compiler.h:179:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:109:2: note: in expansion of macro 'unlikely'
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/media/tuners/fc0011.c:344:3: note: in expansion of macro 'WARN_ON'
WARN_ON(1);
^~~~~~~
drivers/media/tuners/fc0011.c:345:2: note: here
case 0:
^~~~
In file included from ./include/uapi/linux/stddef.h:1:0,
from ./include/linux/stddef.h:4,
from ./include/uapi/linux/posix_types.h:4,
from ./include/uapi/linux/types.h:13,
from ./include/linux/types.h:5,
from ./include/linux/list.h:4,
from ./include/linux/module.h:9,
from drivers/media/pci/tw5864/tw5864-video.c:17:
drivers/media/pci/tw5864/tw5864-video.c: In function 'tw5864_fmt_vid_cap':
./include/linux/compiler.h:179:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:68:2: note: in expansion of macro 'unlikely'
unlikely(__ret_warn_on); \
^~~~~~~~
drivers/media/pci/tw5864/tw5864-video.c:547:3: note: in expansion of macro 'WARN_ON_ONCE'
WARN_ON_ONCE(1);
^~~~~~~~~~~~
drivers/media/pci/tw5864/tw5864-video.c:548:2: note: here
case STD_NTSC:
^~~~
On both cases, it means an error, so, let's return an error
code, to make gcc happy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-18 22:06:43 +08:00
|
|
|
return -EINVAL;
|
2012-04-02 23:14:32 +08:00
|
|
|
case 0:
|
|
|
|
|
if (vco_cal < 8) {
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
|
|
|
|
|
regs[FC11_REG_VCOSEL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
err = fc0011_vcocal_trigger(priv);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
} else {
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
|
|
|
|
|
regs[FC11_REG_VCOSEL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case 1:
|
|
|
|
|
if (vco_cal < 5) {
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
|
|
|
|
|
regs[FC11_REG_VCOSEL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
err = fc0011_vcocal_trigger(priv);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
} else if (vco_cal <= 48) {
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
|
|
|
|
|
regs[FC11_REG_VCOSEL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
} else {
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
|
|
|
|
|
regs[FC11_REG_VCOSEL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
err = fc0011_vcocal_trigger(priv);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case 2:
|
|
|
|
|
if (vco_cal > 53) {
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
|
|
|
|
|
regs[FC11_REG_VCOSEL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
err = fc0011_vcocal_trigger(priv);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
} else {
|
|
|
|
|
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
|
|
|
|
|
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
|
|
|
|
|
regs[FC11_REG_VCOSEL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
err = fc0011_vcocal_read(priv, NULL);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
2012-04-03 16:08:45 +08:00
|
|
|
usleep_range(10000, 50000);
|
2012-04-02 23:14:32 +08:00
|
|
|
|
|
|
|
|
err = fc0011_readreg(priv, FC11_REG_RCCAL, ®s[FC11_REG_RCCAL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
regs[FC11_REG_RCCAL] |= FC11_RCCAL_FORCE;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
2013-02-07 23:19:30 +08:00
|
|
|
regs[FC11_REG_16] = 0xB;
|
|
|
|
|
err = fc0011_writereg(priv, FC11_REG_16, regs[FC11_REG_16]);
|
2012-04-02 23:14:32 +08:00
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
|
[media] tuners: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19 03:44:26 +08:00
|
|
|
dev_dbg(&priv->i2c->dev, "Tuned to fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X vcocal=%02X(%u) bw=%u\n",
|
2012-04-02 23:14:32 +08:00
|
|
|
(unsigned int)regs[FC11_REG_FA],
|
|
|
|
|
(unsigned int)regs[FC11_REG_FP],
|
|
|
|
|
(unsigned int)regs[FC11_REG_XINHI],
|
|
|
|
|
(unsigned int)regs[FC11_REG_XINLO],
|
|
|
|
|
(unsigned int)regs[FC11_REG_VCO],
|
|
|
|
|
(unsigned int)regs[FC11_REG_VCOSEL],
|
|
|
|
|
(unsigned int)vco_cal, vco_retries,
|
|
|
|
|
(unsigned int)bandwidth);
|
|
|
|
|
|
|
|
|
|
priv->frequency = p->frequency;
|
|
|
|
|
priv->bandwidth = p->bandwidth_hz;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int fc0011_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
|
|
|
{
|
|
|
|
|
struct fc0011_priv *priv = fe->tuner_priv;
|
|
|
|
|
|
|
|
|
|
*frequency = priv->frequency;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int fc0011_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
|
|
|
{
|
|
|
|
|
*frequency = 0;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int fc0011_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|
|
|
|
{
|
|
|
|
|
struct fc0011_priv *priv = fe->tuner_priv;
|
|
|
|
|
|
|
|
|
|
*bandwidth = priv->bandwidth;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct dvb_tuner_ops fc0011_tuner_ops = {
|
|
|
|
|
.info = {
|
|
|
|
|
.name = "Fitipower FC0011",
|
|
|
|
|
|
|
|
|
|
.frequency_min = 45000000,
|
|
|
|
|
.frequency_max = 1000000000,
|
|
|
|
|
},
|
|
|
|
|
|
2016-11-19 06:30:51 +08:00
|
|
|
.release = fc0011_release,
|
2012-04-02 23:14:32 +08:00
|
|
|
.init = fc0011_init,
|
|
|
|
|
|
|
|
|
|
.set_params = fc0011_set_params,
|
|
|
|
|
|
|
|
|
|
.get_frequency = fc0011_get_frequency,
|
|
|
|
|
.get_if_frequency = fc0011_get_if_frequency,
|
|
|
|
|
.get_bandwidth = fc0011_get_bandwidth,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
|
|
|
|
|
struct i2c_adapter *i2c,
|
|
|
|
|
const struct fc0011_config *config)
|
|
|
|
|
{
|
|
|
|
|
struct fc0011_priv *priv;
|
|
|
|
|
|
|
|
|
|
priv = kzalloc(sizeof(struct fc0011_priv), GFP_KERNEL);
|
|
|
|
|
if (!priv)
|
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
|
|
priv->i2c = i2c;
|
|
|
|
|
priv->addr = config->i2c_address;
|
|
|
|
|
|
|
|
|
|
fe->tuner_priv = priv;
|
|
|
|
|
fe->ops.tuner_ops = fc0011_tuner_ops;
|
|
|
|
|
|
|
|
|
|
dev_info(&priv->i2c->dev, "Fitipower FC0011 tuner attached\n");
|
|
|
|
|
|
|
|
|
|
return fe;
|
|
|
|
|
}
|
|
|
|
|
EXPORT_SYMBOL(fc0011_attach);
|
|
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Fitipower FC0011 silicon tuner driver");
|
|
|
|
|
MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
|
|
|
|
|
MODULE_LICENSE("GPL");
|