OpenCloudOS-Kernel/drivers/pci/controller/dwc/pcie-spear13xx.c

267 lines
6.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* PCIe host controller driver for ST Microelectronics SPEAr13xx SoCs
*
* SPEAr13xx PCIe Glue Layer Source Code
*
* Copyright (C) 2010-2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@gmail.com>
* Mohit Kumar <mohit.kumar.dhaka@gmail.com>
*/
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
#include "pcie-designware.h"
struct spear13xx_pcie {
struct dw_pcie *pci;
void __iomem *app_base;
struct phy *phy;
struct clk *clk;
};
struct pcie_app_reg {
u32 app_ctrl_0; /* cr0 */
u32 app_ctrl_1; /* cr1 */
u32 app_status_0; /* cr2 */
u32 app_status_1; /* cr3 */
u32 msg_status; /* cr4 */
u32 msg_payload; /* cr5 */
u32 int_sts; /* cr6 */
u32 int_clr; /* cr7 */
u32 int_mask; /* cr8 */
u32 mst_bmisc; /* cr9 */
u32 phy_ctrl; /* cr10 */
u32 phy_status; /* cr11 */
u32 cxpl_debug_info_0; /* cr12 */
u32 cxpl_debug_info_1; /* cr13 */
u32 ven_msg_ctrl_0; /* cr14 */
u32 ven_msg_ctrl_1; /* cr15 */
u32 ven_msg_data_0; /* cr16 */
u32 ven_msg_data_1; /* cr17 */
u32 ven_msi_0; /* cr18 */
u32 ven_msi_1; /* cr19 */
u32 mst_rmisc; /* cr20 */
};
/* CR0 ID */
#define APP_LTSSM_ENABLE_ID 3
#define DEVICE_TYPE_RC (4 << 25)
#define MISCTRL_EN_ID 30
#define REG_TRANSLATION_ENABLE 31
/* CR3 ID */
#define XMLH_LINK_UP (1 << 6)
/* CR6 */
#define MSI_CTRL_INT (1 << 26)
#define to_spear13xx_pcie(x) dev_get_drvdata((x)->dev)
PCI: dwc: Move link handling into common code All the DWC drivers do link setup and checks at roughly the same time. Let's use the existing .start_link() hook (currently only used in EP mode) and move the link handling to the core code. The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device. Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:53 +08:00
static int spear13xx_pcie_start_link(struct dw_pcie *pci)
{
PCI: dwc: Move link handling into common code All the DWC drivers do link setup and checks at roughly the same time. Let's use the existing .start_link() hook (currently only used in EP mode) and move the link handling to the core code. The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device. Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:53 +08:00
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pci);
struct pcie_app_reg __iomem *app_reg = spear13xx_pcie->app_base;
/* enable ltssm */
writel(DEVICE_TYPE_RC | (1 << MISCTRL_EN_ID)
| (1 << APP_LTSSM_ENABLE_ID)
| ((u32)1 << REG_TRANSLATION_ENABLE),
&app_reg->app_ctrl_0);
PCI: dwc: Move link handling into common code All the DWC drivers do link setup and checks at roughly the same time. Let's use the existing .start_link() hook (currently only used in EP mode) and move the link handling to the core code. The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device. Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:53 +08:00
return 0;
}
static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg)
{
struct spear13xx_pcie *spear13xx_pcie = arg;
struct pcie_app_reg __iomem *app_reg = spear13xx_pcie->app_base;
struct dw_pcie *pci = spear13xx_pcie->pci;
struct pcie_port *pp = &pci->pp;
unsigned int status;
status = readl(&app_reg->int_sts);
if (status & MSI_CTRL_INT) {
BUG_ON(!IS_ENABLED(CONFIG_PCI_MSI));
dw_handle_msi_irq(pp);
}
writel(status, &app_reg->int_clr);
return IRQ_HANDLED;
}
static void spear13xx_pcie_enable_interrupts(struct spear13xx_pcie *spear13xx_pcie)
{
struct pcie_app_reg __iomem *app_reg = spear13xx_pcie->app_base;
/* Enable MSI interrupt */
PCI: dwc: Move dw_pcie_msi_init() into core The host drivers which call dw_pcie_msi_init() are all the ones using the built-in MSI controller, so let's move it into the common DWC code. Link: https://lore.kernel.org/r/20201105211159.1814485-12-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:54 +08:00
if (IS_ENABLED(CONFIG_PCI_MSI))
writel(readl(&app_reg->int_mask) |
MSI_CTRL_INT, &app_reg->int_mask);
}
static int spear13xx_pcie_link_up(struct dw_pcie *pci)
{
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pci);
struct pcie_app_reg __iomem *app_reg = spear13xx_pcie->app_base;
if (readl(&app_reg->app_status_1) & XMLH_LINK_UP)
return 1;
return 0;
}
static int spear13xx_pcie_host_init(struct pcie_port *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pci);
PCI: dwc: Move link handling into common code All the DWC drivers do link setup and checks at roughly the same time. Let's use the existing .start_link() hook (currently only used in EP mode) and move the link handling to the core code. The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device. Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:53 +08:00
u32 exp_cap_off = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
u32 val;
PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code Most DWC drivers use the common register resource names "dbi", "dbi2", and "addr_space", so let's move their setup into the DWC common code. This means 'dbi_base' in particular is setup later, but it looks like no drivers touch DBI registers before dw_pcie_host_init or dw_pcie_ep_init. Link: https://lore.kernel.org/r/20201105211159.1814485-4-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Minghuan Lian <minghuan.Lian@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Roy Zang <roy.zang@nxp.com> Cc: Jonathan Chocron <jonnyc@amazon.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:46 +08:00
spear13xx_pcie->app_base = pci->dbi_base + 0x2000;
PCI: dwc: Move link handling into common code All the DWC drivers do link setup and checks at roughly the same time. Let's use the existing .start_link() hook (currently only used in EP mode) and move the link handling to the core code. The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device. Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:53 +08:00
/*
* this controller support only 128 bytes read size, however its
* default value in capability register is 512 bytes. So force
* it to 128 here.
*/
val = dw_pcie_readw_dbi(pci, exp_cap_off + PCI_EXP_DEVCTL);
val &= ~PCI_EXP_DEVCTL_READRQ;
dw_pcie_writew_dbi(pci, exp_cap_off + PCI_EXP_DEVCTL, val);
dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, 0x104A);
dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, 0xCD80);
spear13xx_pcie_enable_interrupts(spear13xx_pcie);
return 0;
}
static const struct dw_pcie_host_ops spear13xx_pcie_host_ops = {
.host_init = spear13xx_pcie_host_init,
};
static int spear13xx_add_pcie_port(struct spear13xx_pcie *spear13xx_pcie,
struct platform_device *pdev)
{
struct dw_pcie *pci = spear13xx_pcie->pci;
struct pcie_port *pp = &pci->pp;
struct device *dev = &pdev->dev;
int ret;
pp->irq = platform_get_irq(pdev, 0);
PCI: Remove dev_err() when handing an error from platform_get_irq() There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. This change is as per suggestions from Coccinelle, e.g., drivers/pci/controller/dwc/pcie-armada8k.c:252:2-9: line 252 is redundant because platform_get_irq() already prints an error [bhelgaas: squashed into one commit] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200802142601.1635926-2-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-3-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-4-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-5-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-6-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-7-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-8-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-9-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-10-kw@linux.com Link: https://lore.kernel.org/r/20200803071040.1663662-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> # altera Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # dwc
2020-08-02 22:25:53 +08:00
if (pp->irq < 0)
return pp->irq;
PCI: Remove dev_err() when handing an error from platform_get_irq() There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. This change is as per suggestions from Coccinelle, e.g., drivers/pci/controller/dwc/pcie-armada8k.c:252:2-9: line 252 is redundant because platform_get_irq() already prints an error [bhelgaas: squashed into one commit] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200802142601.1635926-2-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-3-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-4-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-5-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-6-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-7-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-8-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-9-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-10-kw@linux.com Link: https://lore.kernel.org/r/20200803071040.1663662-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> # altera Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # dwc
2020-08-02 22:25:53 +08:00
ret = devm_request_irq(dev, pp->irq, spear13xx_pcie_irq_handler,
PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD On -RT and if kernel is booting with "threadirqs" cmd line parameter, PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler()) will be forced threaded and, as result, will generate warnings like this: WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174() irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts Backtrace: (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40) (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174) (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8) (handle_irq_event) from (handle_simple_irq+0x90/0x118) (handle_simple_irq) from (generic_handle_irq+0x30/0x44) (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c) (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c) (irq_forced_thread_fn) from (irq_thread+0x128/0x204) This happens because all of them invoke generic_handle_irq() from the requested handler. generic_handle_irq() grabs raw_locks and thus needs to run in raw-IRQ context. This issue was originally reproduced on TI dra7-evem, but, as was identified during discussion [1], other hosts can also suffer from this issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers IRQF_NO_THREAD explicitly. [1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com [bhelgaas: add stable tag, fix typos] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6) CC: stable@vger.kernel.org CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2015-12-11 03:18:20 +08:00
IRQF_SHARED | IRQF_NO_THREAD,
"spear1340-pcie", spear13xx_pcie);
if (ret) {
dev_err(dev, "failed to request irq %d\n", pp->irq);
return ret;
}
pp->ops = &spear13xx_pcie_host_ops;
PCI: dwc: Move MSI interrupt setup into DWC common code Platforms using the built-in DWC MSI controller all have a dedicated interrupt with "msi" name or at index 0, so let's move setting up the interrupt to the common DWC code. spear13xx and dra7xx are the 2 oddballs with muxed interrupts, so we need to prevent configuring the MSI interrupt by setting msi_irq to negative. Link: https://lore.kernel.org/r/20201105211159.1814485-9-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:51 +08:00
pp->msi_irq = -ENODEV;
ret = dw_pcie_host_init(pp);
if (ret) {
dev_err(dev, "failed to initialize host\n");
return ret;
}
return 0;
}
static const struct dw_pcie_ops dw_pcie_ops = {
.link_up = spear13xx_pcie_link_up,
PCI: dwc: Move link handling into common code All the DWC drivers do link setup and checks at roughly the same time. Let's use the existing .start_link() hook (currently only used in EP mode) and move the link handling to the core code. The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device. Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 05:11:53 +08:00
.start_link = spear13xx_pcie_start_link,
};
static int spear13xx_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct dw_pcie *pci;
struct spear13xx_pcie *spear13xx_pcie;
struct device_node *np = dev->of_node;
int ret;
spear13xx_pcie = devm_kzalloc(dev, sizeof(*spear13xx_pcie), GFP_KERNEL);
if (!spear13xx_pcie)
return -ENOMEM;
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
if (!pci)
return -ENOMEM;
pci->dev = dev;
pci->ops = &dw_pcie_ops;
spear13xx_pcie->pci = pci;
spear13xx_pcie->phy = devm_phy_get(dev, "pcie-phy");
if (IS_ERR(spear13xx_pcie->phy)) {
ret = PTR_ERR(spear13xx_pcie->phy);
if (ret == -EPROBE_DEFER)
dev_info(dev, "probe deferred\n");
else
dev_err(dev, "couldn't get pcie-phy\n");
return ret;
}
phy_init(spear13xx_pcie->phy);
spear13xx_pcie->clk = devm_clk_get(dev, NULL);
if (IS_ERR(spear13xx_pcie->clk)) {
dev_err(dev, "couldn't get clk for pcie\n");
return PTR_ERR(spear13xx_pcie->clk);
}
ret = clk_prepare_enable(spear13xx_pcie->clk);
if (ret) {
dev_err(dev, "couldn't enable clk for pcie\n");
return ret;
}
if (of_property_read_bool(np, "st,pcie-is-gen1"))
pci->link_gen = 1;
platform_set_drvdata(pdev, spear13xx_pcie);
ret = spear13xx_add_pcie_port(spear13xx_pcie, pdev);
if (ret < 0)
goto fail_clk;
return 0;
fail_clk:
clk_disable_unprepare(spear13xx_pcie->clk);
return ret;
}
static const struct of_device_id spear13xx_pcie_of_match[] = {
{ .compatible = "st,spear1340-pcie", },
{},
};
static struct platform_driver spear13xx_pcie_driver = {
.probe = spear13xx_pcie_probe,
.driver = {
.name = "spear-pcie",
.of_match_table = of_match_ptr(spear13xx_pcie_of_match),
.suppress_bind_attrs = true,
},
};
builtin_platform_driver(spear13xx_pcie_driver);