OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_modes.c

136 lines
3.9 KiB
C
Raw Normal View History

/*
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2007, 2010 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/i2c.h>
drm/i915: pass ELD to HDMI/DP audio driver Add ELD support for Intel Eaglelake, IbexPeak/Ironlake, SandyBridge/CougarPoint and IvyBridge/PantherPoint chips. ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. It's built and passed to audio driver in 2 steps: (1) at get_modes time, parse EDID and save ELD to drm_connector.eld[] (2) at mode_set time, write drm_connector.eld[] to the Transcoder's hw ELD buffer and set the ELD_valid bit to inform HDMI/DP audio driver This patch is tested OK on G45/HDMI, IbexPeak/HDMI and IvyBridge/HDMI+DP. Test scheme: plug in the HDMI/DP monitor, and run cat /proc/asound/card0/eld* to check if the monitor name, HDMI/DP type, etc. show up correctly. Minor imperfection: the GEN5_AUD_CNTL_ST/DIP_Port_Select field always reads 0 (reserved). Without knowing the port number, I worked it around by setting the ELD_valid bit for ALL the three ports. It's tested to not be a problem, because the audio driver will find invalid ELD data and hence rightfully abort, even when it sees the ELD_valid indicator. Thanks to Zhenyu and Pierre-Louis for a lot of valuable help and testing. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 14:25:34 +08:00
#include <drm/drm_edid.h>
#include <drm/drmP.h>
#include "intel_drv.h"
#include "i915_drv.h"
/**
* intel_connector_update_modes - update connector from edid
* @connector: DRM connector device to use
* @edid: previously read EDID information
*/
int intel_connector_update_modes(struct drm_connector *connector,
struct edid *edid)
{
int ret;
drm_mode_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
return ret;
}
/**
* intel_ddc_get_modes - get modelist from monitor
* @connector: DRM connector device to use
* @adapter: i2c adapter
*
* Fetch the EDID information from @connector using the DDC bus.
*/
int intel_ddc_get_modes(struct drm_connector *connector,
struct i2c_adapter *adapter)
{
struct edid *edid;
int ret;
edid = drm_get_edid(connector, adapter);
if (!edid)
return 0;
ret = intel_connector_update_modes(connector, edid);
kfree(edid);
return ret;
}
static const struct drm_prop_enum_list force_audio_names[] = {
{ HDMI_AUDIO_OFF_DVI, "force-dvi" },
{ HDMI_AUDIO_OFF, "off" },
{ HDMI_AUDIO_AUTO, "auto" },
{ HDMI_AUDIO_ON, "on" },
};
void
intel_attach_force_audio_property(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_property *prop;
prop = dev_priv->force_audio_property;
if (prop == NULL) {
prop = drm_property_create_enum(dev, 0,
"audio",
force_audio_names,
ARRAY_SIZE(force_audio_names));
if (prop == NULL)
return;
dev_priv->force_audio_property = prop;
}
drm_object_attach_property(&connector->base, prop, 0);
}
static const struct drm_prop_enum_list broadcast_rgb_names[] = {
{ INTEL_BROADCAST_RGB_AUTO, "Automatic" },
{ INTEL_BROADCAST_RGB_FULL, "Full" },
{ INTEL_BROADCAST_RGB_LIMITED, "Limited 16:235" },
};
void
intel_attach_broadcast_rgb_property(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_property *prop;
prop = dev_priv->broadcast_rgb_property;
if (prop == NULL) {
prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
"Broadcast RGB",
broadcast_rgb_names,
ARRAY_SIZE(broadcast_rgb_names));
if (prop == NULL)
return;
dev_priv->broadcast_rgb_property = prop;
}
drm_object_attach_property(&connector->base, prop, 0);
}
void
intel_attach_aspect_ratio_property(struct drm_connector *connector)
{
if (!drm_mode_create_aspect_ratio_property(connector->dev))
drm_object_attach_property(&connector->base,
connector->dev->mode_config.aspect_ratio_property,
DRM_MODE_PICTURE_ASPECT_NONE);
}