UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/ata/libata.h

191 lines
8.1 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
[libata] license change, other bits - changes license of all code from OSL+GPL to plain ole GPL - except for NVIDIA, who hasn't yet responded about sata_nv - copyright holders were already contacted privately - adds info in each driver about where hardware/protocol docs may be obtained - where I have made major contributions, updated copyright dates
2005-08-29 08:18:39 +08:00
* libata.h - helper library for ATA
*
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
* Copyright 2003-2004 Jeff Garzik
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#ifndef __LIBATA_H__
#define __LIBATA_H__
#define DRV_NAME "libata"
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-23 12:19:54 +08:00
#define DRV_VERSION "3.00" /* must be exactly four chars */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ata_scsi_args {
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 16:56:18 +08:00
struct ata_device *dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u16 *id;
struct scsi_cmnd *cmd;
void (*done)(struct scsi_cmnd *);
};
/* libata-core.c */
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 17:08:10 +08:00
enum {
/* flags for ata_dev_read_id() */
ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 15:22:30 +08:00
/* selector for ata_down_xfermask_limit() */
ATA_DNXFER_PIO = 0, /* speed down PIO */
ATA_DNXFER_DMA = 1, /* speed down DMA */
ATA_DNXFER_40C = 2, /* apply 40c cable limit */
ATA_DNXFER_FORCE_PIO = 3, /* force PIO */
ATA_DNXFER_FORCE_PIO0 = 4, /* force PIO0 */
ATA_DNXFER_QUIET = (1 << 31),
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 17:08:10 +08:00
};
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:07 +08:00
extern unsigned int ata_print_id;
[PATCH] libata-hp-prep: add ata_aux_wq It's best to run ATA hotplug from EH but attaching SCSI devices needs working EH. ata_aux_wq is used to give SCSI hotplug operations a separate context. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:27:42 +08:00
extern struct workqueue_struct *ata_aux_wq;
[libata] allow ATAPI to be enabled with new atapi_enabled module option ATAPI is getting close to being ready. To increase exposure, we enable the code in the upstream kernel, but default it to off (present behavior). Users must pass atapi_enabled=1 as a module option (if module) or on the kernel command line (if built in) to turn on discovery of their ATAPI devices.
2005-08-30 15:37:42 +08:00
extern int atapi_enabled;
[PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameter Convert the ATAPI_ENABLE_DMADIR compile time option needed by some SATA-PATA bridge to runtime module parameter. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-04 10:57:18 +08:00
extern int atapi_dmadir;
libata: add support for ATA_16 on ATAPI Add support for issuing ATA_16 passthru commands to ATAPI devices managed by libata. It requires the previous CDB length fix patch. A boot/module parameter, "atapi_passthru16=0" can be used to globally disable this feature, if ever desired. tj: restructured __ata_scsi_queuecmd() according to Jeff's suggestion. Signed-off-by: Mark Lord <liml@rtr.ca> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-08 00:08:45 +08:00
extern int atapi_passthru16;
[libata] Disable FUA Until problems are sorted.
2006-02-28 11:31:19 +08:00
extern int libata_fua;
[libata] Disable ACPI by default; fix namespace problems Not yet ready to turn on ATA ACPI by default, for either PATA or SATA. Also, rename the global-scope module parameter variable 'noacpi' to something more libata-specific, reducing the potential for namespace collision. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28 13:57:37 +08:00
extern int libata_noacpi;
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:57:53 +08:00
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
[PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() Separate out rw ATA taskfile building from ata_scsi_rw_xlat() into ata_build_rw_tf(). This will be used to improve media error handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 21:47:10 +08:00
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
[PATCH] libata: implement ata_tf_read_block() Implement ata_tf_read_block(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 21:37:35 +08:00
extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:57:53 +08:00
extern void ata_dev_disable(struct ata_device *dev);
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 14:29:09 +08:00
extern void ata_port_flush_task(struct ata_port *ap);
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:57:53 +08:00
extern unsigned ata_exec_internal(struct ata_device *dev,
[PATCH] libata: make some libata-core routines extern Make libata-core routines which will be used by EH implementation extern. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 17:51:53 +08:00
struct ata_taskfile *tf, const u8 *cdb,
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 14:05:44 +08:00
int dma_dir, void *buf, unsigned int buflen,
unsigned long timeout);
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 21:47:09 +08:00
extern unsigned ata_exec_internal_sg(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, struct scatterlist *sg,
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 14:05:44 +08:00
unsigned int n_elem, unsigned long timeout);
[PATCH] libata: make two functions global Make ata_do_simple_cmd() and ata_flush_cache() global. These will be used from libata-eh.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-24 19:30:19 +08:00
extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
[PATCH] libata-hp-prep: make probing related functions global Hotplug will be implemented in libata-eh.c. Make ata_dev_read_id() and ata_dev_configure() global. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:27:44 +08:00
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 17:08:10 +08:00
unsigned int flags, u16 *id);
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15 02:28:15 +08:00
extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
libata-pmp-prep: add @new_class to ata_dev_revalidate() Consider newly found class code while revalidating. PMP resetting always results in valid class code and issuing PMP commands to ATA/ATAPI device isn't very attractive. Add @new_class to ata_dev_revalidate() and check class code for revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-23 12:14:12 +08:00
extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
unsigned int readid_flags);
[PATCH] libata: implement ATA_EHI_PRINTINFO Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:38:52 +08:00
extern int ata_dev_configure(struct ata_device *dev);
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
extern int sata_down_spd_limit(struct ata_link *link);
extern int sata_set_spd_needed(struct ata_link *link);
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 15:22:30 +08:00
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
libata-link: linkify config/EH related functions Make the following functions deal with ata_link instead of ata_port. * ata_set_mode() * ata_eh_autopsy() and related functions * ata_eh_report() and related functions * suspend/resume related functions * ata_eh_recover() and related functions Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
[PATCH] libata: prepare ata_sg_clean() for invocation from EH Make ata_sg_clean() global and don't allow NCQ for internal commands. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 21:47:10 +08:00
extern void ata_sg_clean(struct ata_queued_cmd *qc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void ata_qc_free(struct ata_queued_cmd *qc);
[PATCH] libata: make ata_qc_issue complete failed qcs There is no reason for the issuer to diddle with a failed qc as the issuer has complete control over when a qc gets freed (usually in ->complete_fn). Make ata_qc_issue() responsible for completing qcs which failed to issue. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 19:41:11 +08:00
extern void ata_qc_issue(struct ata_queued_cmd *qc);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:05 +08:00
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
[PATCH] libata: make two functions global Make ata_do_simple_cmd() and ata_flush_cache() global. These will be used from libata-eh.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-24 19:30:19 +08:00
extern int ata_flush_cache(struct ata_device *dev);
[PATCH] libata-hp-prep: implement ata_dev_init() Move initialization of struct ata_device into ata_dev_init() in preparation for hotplug. This patch calls ata_dev_init() from ata_host_init() and thus makes no functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:27:30 +08:00
extern void ata_dev_init(struct ata_device *dev);
libata-pmp-prep: make a number of functions global to libata Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-23 12:14:12 +08:00
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
extern int sata_link_init_spd(struct ata_link *link);
[libata] ATA passthru (arbitrary ATA command execution) Authors: Brett Russ <russb@emc.com> John W. Linville <linville@tuxdriver.com> Andy Warner <andyw@pobox.com>
2005-05-13 03:45:22 +08:00
extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:07 +08:00
extern struct ata_port *ata_port_alloc(struct ata_host *host);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2006-09-29 02:29:01 +08:00
/* libata-acpi.c */
libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/ ACPI applies to both SATA and PATA. Drop the 'S' from the config variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-05 22:50:38 +08:00
#ifdef CONFIG_ATA_ACPI
libata-pmp: extend ACPI support to cover PMP Extend ata_acpi_associate_sata_port() such that it can handle PMP and call it when PMP is attached and detached. Build breakage when !CONFIG_ATA_ACPI was spotted and fixed by Petr Vandrovec. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-23 12:19:54 +08:00
extern void ata_acpi_associate_sata_port(struct ata_port *ap);
libata-acpi: implement ata_acpi_associate() * Add acpi_handle to ata_host and ata_port. Rename ata_device->obj_handle to ->acpi_handle and move it above such that it doesn't get cleared on reconfiguration. * Replace ACPI node association which ata_acpi_associate() which is called once during host initialization. Unlike the previous implementation, ata_acpi_associate() uses ATA_FLAG_ACPI_SATA to choose between IDE or SATA ACPI hierarchy and uses simple child look up instead of recursive walk to match the nodes. This is way safer and simpler. Please read the following message for more info. http://article.gmane.org/gmane.linux.ide/17554 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15 02:28:16 +08:00
extern void ata_acpi_associate(struct ata_host *host);
libata-acpi: implement _GTM/_STM support Implement _GTM/_STM support. acpi_gtm is added to ata_port which stores _GTM parameters over suspend/resume cycle. A new hook ata_acpi_on_suspend() is responsible for storing _GTM parameters during suspend. _STM is executed in ata_acpi_on_resume(). With this change, invoking _GTF is safe on IDE hierarchy and acpi_sata check before _GTF is removed. ata_acpi_gtm() and ata_acpi_stm() implementation is taken from Alan Cox's pata_acpi implementation. ata_acpi_gtm() is fixed such that the result parameter is not shifted by sizeof(union acpi_object). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15 02:28:16 +08:00
extern int ata_acpi_on_suspend(struct ata_port *ap);
libata: reimplement ACPI invocation This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15 02:28:16 +08:00
extern void ata_acpi_on_resume(struct ata_port *ap);
extern int ata_acpi_on_devcfg(struct ata_device *adev);
[PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2006-09-29 02:29:01 +08:00
#else
libata-pmp: extend ACPI support to cover PMP Extend ata_acpi_associate_sata_port() such that it can handle PMP and call it when PMP is attached and detached. Build breakage when !CONFIG_ATA_ACPI was spotted and fixed by Petr Vandrovec. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-23 12:19:54 +08:00
static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
libata-acpi: implement ata_acpi_associate() * Add acpi_handle to ata_host and ata_port. Rename ata_device->obj_handle to ->acpi_handle and move it above such that it doesn't get cleared on reconfiguration. * Replace ACPI node association which ata_acpi_associate() which is called once during host initialization. Unlike the previous implementation, ata_acpi_associate() uses ATA_FLAG_ACPI_SATA to choose between IDE or SATA ACPI hierarchy and uses simple child look up instead of recursive walk to match the nodes. This is way safer and simpler. Please read the following message for more info. http://article.gmane.org/gmane.linux.ide/17554 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15 02:28:16 +08:00
static inline void ata_acpi_associate(struct ata_host *host) { }
libata-acpi: implement _GTM/_STM support Implement _GTM/_STM support. acpi_gtm is added to ata_port which stores _GTM parameters over suspend/resume cycle. A new hook ata_acpi_on_suspend() is responsible for storing _GTM parameters during suspend. _STM is executed in ata_acpi_on_resume(). With this change, invoking _GTF is safe on IDE hierarchy and acpi_sata check before _GTF is removed. ata_acpi_gtm() and ata_acpi_stm() implementation is taken from Alan Cox's pata_acpi implementation. ata_acpi_gtm() is fixed such that the result parameter is not shifted by sizeof(union acpi_object). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15 02:28:16 +08:00
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
libata: reimplement ACPI invocation This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15 02:28:16 +08:00
static inline void ata_acpi_on_resume(struct ata_port *ap) { }
static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
[PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2006-09-29 02:29:01 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* libata-scsi.c */
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:07 +08:00
extern int ata_scsi_add_hosts(struct ata_host *host,
struct scsi_host_template *sht);
libata: improve SCSI scan failure handling SCSI scan may fail due to memory allocation failure even if EH is not in progress. Due to use of GFP_ATOMIC in SCSI scan path, allocation failure isn't too rare especially while probing multiple devices at once which is the case when a bunch of devices are connected to PMP. This patch moves SCSI scan failure detetion logic from ata_scsi_hotplug() to ata_scsi_scan_host() and implement synchronous scan behavior. The synchronous path sleeps briefly and repeats SCSI scan if some devices aren't attached properly. It contains robust retry loop to minimize the chance of device misdetection during boot and falls back to async retry if everything fails. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
[PATCH] libata-hp: implement ata_eh_detach_dev() Implement ata_eh_detach_dev(). This function is responsible for detaching an ATA device and offlining the associated SCSI device atomically so that the detached device is not accessed after ATA detach is complete. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:28:01 +08:00
extern int ata_scsi_offline_dev(struct ata_device *dev);
libata-pmp-prep: implement sata_async_notification() AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-23 12:14:13 +08:00
extern void ata_scsi_media_change_notify(struct ata_device *dev);
WorkStruct: Pass the work_struct pointer instead of context data Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:55:48 +08:00
extern void ata_scsi_hotplug(struct work_struct *work);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern unsigned int ata_scsiop_sync_cache(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
extern void ata_scsi_badcmd(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *),
u8 asc, u8 ascq);
[libata scsi] add ata_scsi_set_sense helper - add extern ata_scsi_set_sense() to build SCSI fixed sense data and corresponding SCSI status Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-09 20:55:41 +08:00
extern void ata_scsi_set_sense(struct scsi_cmnd *cmd,
u8 sk, u8 asc, u8 ascq);
libata: trim trailing whitespace. Also, fixup a tabs-to-spaces block of code in ata_piix.
2005-08-01 01:13:24 +08:00
extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned int (*actor) (struct ata_scsi_args *args,
u8 *rbuf, unsigned int buflen));
[PATCH] libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort() ata_port_schedule_eh() directly schedules EH for @ap without associated qc. Once EH scheduled, no further qc is allowed and EH kicks in as soon as all currently active qc's are drained. ata_port_abort() schedules all currently active commands for EH by qc_completing them with ATA_QCFLAG_FAILED set. If ata_port_abort() doesn't find any qc to abort, it directly schedule EH using ata_port_schedule_eh(). These two functions provide ways to invoke EH for conditions which aren't directly related to any specfic qc. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:07 +08:00
extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
WorkStruct: Pass the work_struct pointer instead of context data Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:55:48 +08:00
extern void ata_scsi_dev_rescan(struct work_struct *work);
[PATCH] libata: Add support for SATA attachment to SAS adapters The following patch enhances libata to allow SAS device drivers to utilize libata to talk to SATA devices. It introduces some new APIs which allow libata to be used without allocating a virtual scsi host. New APIs: ata_sas_port_alloc - Allocate an ata_port ata_sas_port_init - Initialize an ata_port (probe device, etc) ata_sas_port_destroy - Free an ata_port allocated by ata_sas_port_alloc ata_sas_slave_configure - configure scsi device ata_sas_queuecmd - queue a scsi command, similar to ata_scsi_queuecomand These new APIs can be used either directly by a SAS LLDD or could be used by the SAS transport class. Possible usage for a SAS LLDD would be: scsi_scan_host target_alloc ata_sas_port_alloc slave_alloc ata_sas_port_init slave_configure ata_sas_slave_configure Commands received by the LLDD for SATA devices would call ata_sas_queuecmd. Device teardown would occur with: slave_destroy port_disable target_destroy ata_sas_port_destroy Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-08 03:27:31 +08:00
extern int ata_bus_probe(struct ata_port *ap);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata-pmp: implement Port Multiplier support Implement Port Multiplier support. To support PMP, a LLDD has to supply ops->pmp_read() and pmp_write(). If non-null, ->pmp_attach and ->pmp_detach are called on PMP attach and detach, respectively. ->pmp_read/write() can be called while the port is frozen, so they must be implemented by polling. This patch supplies several helpers to ease ->pmp_read/write() implementation. Also, irq_handler and error_handler must be PMP aware. Most of PMP aware EH can be done by calling ata_pmp_do_eh() with appropriate methods. PMP EH uses separate set of reset methods and this patch implements standard prereset, hardreset and postreset methods. This patch only implements PMP support. The next patch will integrate PMP into the reset of libata and thus enable PMP support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-23 12:19:54 +08:00
/* libata-pmp.c */
extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
extern int sata_pmp_attach(struct ata_device *dev);
[PATCH] libata: separate out libata-eh.c A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 17:51:53 +08:00
/* libata-eh.c */
extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
libata: Fix EH merge difference between this branch and upstream.
2006-04-12 01:04:39 +08:00
extern void ata_scsi_error(struct Scsi_Host *host);
[PATCH] libata: implement ata_eh_wait() Implement ata_eh_wait(). On return from this function, it's guaranteed that the EH which was pending or in progress when the function was called is complete - including the tailing part of SCSI EH. This will be used by hotplug and others to synchronize with EH. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:27:27 +08:00
extern void ata_port_wait_eh(struct ata_port *ap);
libata: implement EH fast drain In most cases, when EH is scheduled, all in-flight commands are aborted causing EH to kick in immediately. However, in some cases (especially with PMP), it's unclear which commands are affected by the error condition and although aborting all in-flight commands work, it isn't optimal and may cause unnecessary disruption. On the other hand, waiting for in-flight commands to drain themselves can take up to 30seconds. This patch implements EH fast drain to handle such situations. It gives in-flight commands some time to finish up but doesn't wait for too long. After EH is scheduled, fast drain timer is started and if no other completion occurs in ATA_EH_FASTDRAIN_INTERVAL all in-flight commands are aborted. If any completion occurred in the interval, the port is given another interval to finish up itself. Currently ATA_EH_FASTDRAIN_INTERVAL is 3 secs which should be enough for finishing up most commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:41 +08:00
extern void ata_eh_fastdrain_timerfn(unsigned long arg);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:05 +08:00
extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
libata-pmp-prep: make a number of functions global to libata Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-23 12:14:12 +08:00
extern void ata_eh_detach_dev(struct ata_device *dev);
extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
unsigned int action);
extern void ata_eh_done(struct ata_link *link, struct ata_device *dev,
unsigned int action);
extern void ata_eh_autopsy(struct ata_port *ap);
extern void ata_eh_report(struct ata_port *ap);
extern int ata_eh_reset(struct ata_link *link, int classify,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset);
extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset,
struct ata_link **r_failed_disk);
extern void ata_eh_finish(struct ata_port *ap);
[PATCH] libata: separate out libata-eh.c A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 17:51:53 +08:00
[PATCH] libata: move ata_irq_on() into libata-sff.c ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-09 10:10:26 +08:00
/* libata-sff.c */
extern u8 ata_irq_on(struct ata_port *ap);
fix CONFIG_SATA_SIS=y compile error Static code shouldn't be used from other modules. drivers/built-in.o: In function `sis_init_one': sata_sis.c:(.text+0x7634cd): undefined reference to `sis_info133' sata_sis.c:(.text+0x7634d6): undefined reference to `sis_info133' While I was at it, I also moved the prototype of this struct to a header file. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 16:59:17 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* __LIBATA_H__ */