OpenCloudOS-Kernel/drivers/infiniband/hw/ehca/ehca_sqp.c

203 lines
5.9 KiB
C
Raw Normal View History

/*
* IBM eServer eHCA Infiniband device driver for Linux on POWER
*
* SQP functions
*
* Authors: Khadija Souissi <souissi@de.ibm.com>
* Heiko J Schick <schickhj@de.ibm.com>
*
* Copyright (c) 2005 IBM Corporation
*
* All rights reserved.
*
* This source code is distributed under a dual license of GPL v2.0 and OpenIB
* BSD.
*
* OpenIB BSD License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials
* provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <rdma/ib_mad.h>
#include "ehca_classes.h"
#include "ehca_tools.h"
#include "ehca_iverbs.h"
#include "hcp_if.h"
#define IB_MAD_STATUS_REDIRECT __constant_htons(0x0002)
#define IB_MAD_STATUS_UNSUP_VERSION __constant_htons(0x0004)
#define IB_MAD_STATUS_UNSUP_METHOD __constant_htons(0x0008)
#define IB_PMA_CLASS_PORT_INFO __constant_htons(0x0001)
/**
* ehca_define_sqp - Defines special queue pair 1 (GSI QP). When special queue
* pair is created successfully, the corresponding port gets active.
*
* Define Special Queue pair 0 (SMI QP) is still not supported.
*
* @qp_init_attr: Queue pair init attributes with port and queue pair type
*/
u64 ehca_define_sqp(struct ehca_shca *shca,
struct ehca_qp *ehca_qp,
struct ib_qp_init_attr *qp_init_attr)
{
u32 pma_qp_nr, bma_qp_nr;
u64 ret;
u8 port = qp_init_attr->port_num;
int counter;
shca->sport[port - 1].port_state = IB_PORT_DOWN;
switch (qp_init_attr->qp_type) {
case IB_QPT_SMI:
/* function not supported yet */
break;
case IB_QPT_GSI:
ret = hipz_h_define_aqp1(shca->ipz_hca_handle,
ehca_qp->ipz_qp_handle,
ehca_qp->galpas.kernel,
(u32) qp_init_attr->port_num,
&pma_qp_nr, &bma_qp_nr);
if (ret != H_SUCCESS) {
ehca_err(&shca->ib_device,
"Can't define AQP1 for port %x. h_ret=%li",
port, ret);
return ret;
}
shca->sport[port - 1].pma_qp_nr = pma_qp_nr;
ehca_dbg(&shca->ib_device, "port=%x pma_qp_nr=%x",
port, pma_qp_nr);
break;
default:
ehca_err(&shca->ib_device, "invalid qp_type=%x",
qp_init_attr->qp_type);
return H_PARAMETER;
}
IB/ehca: Add "port connection autodetect mode" This patch enhances ehca with a capability to "autodetect" the ports being connected physically. In order to utilize that function the module option nr_ports must be set to -1 (default is 2 - two ports). This feature is experimental and will made the default later. More detail: If the user connects only one port to the switch, current code requires 1) port one to be connected and 2) module option nr_ports=1 to be given. If autodetect is enabled, ehca will not wait at creation of the GSI QP for the respective port to become active. Since firmware does not accept modify_qp() while the port is down at initialization, we need to cache all calls to modify_qp() for the SMI/GSI QP and just return a good return code. When a port is activated and we get a PORT_ACTIVE event, we replay the cached modify-qp() parms and re-trigger any posted recv WRs. Only then do we forward the PORT_ACTIVE event to registered clients. The result of this autodetect patch is that all ports will be accessible by the users. Depending on their respective cabling only those ports that are connected properly will become operable. If a user tries to modify a regular QP of a non-connected port, modify_qp() will fail. Furthermore, ibv_devinfo should show the port state accordingly. Note that this patch primarily improves the loading behaviour of ehca. If the cable is removed while the driver is operating and plugged in again, firmware will handle that properly by sending an appropriate async event. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-17 22:05:45 +08:00
if (ehca_nr_ports < 0) /* autodetect mode */
return H_SUCCESS;
for (counter = 0;
shca->sport[port - 1].port_state != IB_PORT_ACTIVE &&
counter < ehca_port_act_time;
counter++) {
ehca_dbg(&shca->ib_device, "... wait until port %x is active",
port);
msleep_interruptible(1000);
}
if (counter == ehca_port_act_time) {
ehca_err(&shca->ib_device, "Port %x is not active.", port);
return H_HARDWARE;
}
return H_SUCCESS;
}
struct ib_perf {
struct ib_mad_hdr mad_hdr;
u8 reserved[40];
u8 data[192];
} __attribute__ ((packed));
static int ehca_process_perf(struct ib_device *ibdev, u8 port_num,
struct ib_mad *in_mad, struct ib_mad *out_mad)
{
struct ib_perf *in_perf = (struct ib_perf *)in_mad;
struct ib_perf *out_perf = (struct ib_perf *)out_mad;
struct ib_class_port_info *poi =
(struct ib_class_port_info *)out_perf->data;
struct ehca_shca *shca =
container_of(ibdev, struct ehca_shca, ib_device);
struct ehca_sport *sport = &shca->sport[port_num - 1];
ehca_dbg(ibdev, "method=%x", in_perf->mad_hdr.method);
*out_mad = *in_mad;
if (in_perf->mad_hdr.class_version != 1) {
ehca_warn(ibdev, "Unsupported class_version=%x",
in_perf->mad_hdr.class_version);
out_perf->mad_hdr.status = IB_MAD_STATUS_UNSUP_VERSION;
goto perf_reply;
}
switch (in_perf->mad_hdr.method) {
case IB_MGMT_METHOD_GET:
case IB_MGMT_METHOD_SET:
/* set class port info for redirection */
out_perf->mad_hdr.attr_id = IB_PMA_CLASS_PORT_INFO;
out_perf->mad_hdr.status = IB_MAD_STATUS_REDIRECT;
memset(poi, 0, sizeof(*poi));
poi->base_version = 1;
poi->class_version = 1;
poi->resp_time_value = 18;
poi->redirect_lid = sport->saved_attr.lid;
poi->redirect_qp = sport->pma_qp_nr;
poi->redirect_qkey = IB_QP1_QKEY;
poi->redirect_pkey = IB_DEFAULT_PKEY_FULL;
ehca_dbg(ibdev, "ehca_pma_lid=%x ehca_pma_qp=%x",
sport->saved_attr.lid, sport->pma_qp_nr);
break;
case IB_MGMT_METHOD_GET_RESP:
return IB_MAD_RESULT_FAILURE;
default:
out_perf->mad_hdr.status = IB_MAD_STATUS_UNSUP_METHOD;
break;
}
perf_reply:
out_perf->mad_hdr.method = IB_MGMT_METHOD_GET_RESP;
return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
}
int ehca_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
struct ib_wc *in_wc, struct ib_grh *in_grh,
struct ib_mad *in_mad,
struct ib_mad *out_mad)
{
int ret;
if (!port_num || port_num > ibdev->phys_port_cnt)
return IB_MAD_RESULT_FAILURE;
/* accept only pma request */
if (in_mad->mad_hdr.mgmt_class != IB_MGMT_CLASS_PERF_MGMT)
return IB_MAD_RESULT_SUCCESS;
ehca_dbg(ibdev, "port_num=%x src_qp=%x", port_num, in_wc->src_qp);
ret = ehca_process_perf(ibdev, port_num, in_mad, out_mad);
return ret;
}