UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/linux/vdpa.h

324 lines
10 KiB
C
Raw Normal View History

vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_VDPA_H
#define _LINUX_VDPA_H
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/vhost_iotlb.h>
/**
* vDPA callback definition.
* @callback: interrupt callback function
* @private: the data passed to the callback function
*/
struct vdpa_callback {
irqreturn_t (*callback)(void *data);
void *private;
};
vdpa: introduce get_vq_notification method This patch introduces a new method in the vdpa_config_ops which reports the physical address and the size of the doorbell for a specific virtqueue. This will be used by the future patches that maps doorbell to userspace. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200529080303.15449-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-29 16:03:00 +08:00
/**
* vDPA notification area
* @addr: base address of the notification area
* @size: size of the notification area
*/
struct vdpa_notification_area {
resource_size_t addr;
resource_size_t size;
};
net/vdpa: Use struct for set/get vq state For now VQ state involves 16 bit available index value encoded in u64 variable. In the future it will be extended to contain more fields. Use struct to contain the state, now containing only a single u16 for the available index. In the future we can add fields to this struct. Reviewed-by: Parav Pandit <parav@mellanox.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Link: https://lore.kernel.org/r/20200804162048.22587-8-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-05 00:20:43 +08:00
/**
* vDPA vq_state definition
* @avail_index: available index
*/
struct vdpa_vq_state {
u16 avail_index;
};
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
/**
* vDPA device - representation of a vDPA device
* @dev: underlying device
* @dma_dev: the actual device that is performing DMA
* @config: the configuration ops for this device.
* @index: device index
vdpa: make sure set_features is invoked for legacy Some legacy guests just assume features are 0 after reset. We detect that config space is accessed before features are set and set features to 0 automatically. Note: some legacy guests might not even access config space, if this is reported in the field we might need to catch a kick to handle these. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-27 22:51:55 +08:00
* @features_valid: were features initialized? for legacy guests
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
*/
struct vdpa_device {
struct device dev;
struct device *dma_dev;
const struct vdpa_config_ops *config;
unsigned int index;
vdpa: make sure set_features is invoked for legacy Some legacy guests just assume features are 0 after reset. We detect that config space is accessed before features are set and set features to 0 automatically. Note: some legacy guests might not even access config space, if this is reported in the field we might need to catch a kick to handle these. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-27 22:51:55 +08:00
bool features_valid;
vdpa: remove hard coded virtq num This will enable vdpa providers to add support for multi queue feature and publish it to upper layers (vhost and virtio). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200804162048.22587-7-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-05 00:20:42 +08:00
int nvqs;
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
};
/**
* vDPA_config_ops - operations for configuring a vDPA device.
* Note: vDPA device drivers are required to implement all of the
* operations unless it is mentioned to be optional in the following
* list.
*
* @set_vq_address: Set the address of virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
* @desc_area: address of desc area
* @driver_area: address of driver area
* @device_area: address of device area
* Returns integer: success (0) or error (< 0)
* @set_vq_num: Set the size of virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
* @num: the size of virtqueue
* @kick_vq: Kick the virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
* @set_vq_cb: Set the interrupt callback function for
* a virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
* @cb: virtio-vdev interrupt callback structure
* @set_vq_ready: Set ready status for a virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
* @ready: ready (true) not ready(false)
* @get_vq_ready: Get ready status for a virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
* Returns boolean: ready (true) or not (false)
* @set_vq_state: Set the state for a virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
net/vdpa: Use struct for set/get vq state For now VQ state involves 16 bit available index value encoded in u64 variable. In the future it will be extended to contain more fields. Use struct to contain the state, now containing only a single u16 for the available index. In the future we can add fields to this struct. Reviewed-by: Parav Pandit <parav@mellanox.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Link: https://lore.kernel.org/r/20200804162048.22587-8-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-05 00:20:43 +08:00
* @state: pointer to set virtqueue state (last_avail_idx)
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
* Returns integer: success (0) or error (< 0)
* @get_vq_state: Get the state for a virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
net/vdpa: Use struct for set/get vq state For now VQ state involves 16 bit available index value encoded in u64 variable. In the future it will be extended to contain more fields. Use struct to contain the state, now containing only a single u16 for the available index. In the future we can add fields to this struct. Reviewed-by: Parav Pandit <parav@mellanox.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Link: https://lore.kernel.org/r/20200804162048.22587-8-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-05 00:20:43 +08:00
* @state: pointer to returned state (last_avail_idx)
vdpa: introduce get_vq_notification method This patch introduces a new method in the vdpa_config_ops which reports the physical address and the size of the doorbell for a specific virtqueue. This will be used by the future patches that maps doorbell to userspace. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200529080303.15449-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-29 16:03:00 +08:00
* @get_vq_notification: Get the notification area for a virtqueue
* @vdev: vdpa device
* @idx: virtqueue index
* Returns the notifcation area
vDPA: add get_vq_irq() in vdpa_config_ops This commit adds a new function get_vq_irq() in struct vdpa_config_ops, which will return the irq number of a virtqueue. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Suggested-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200731065533.4144-4-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-31 14:55:30 +08:00
* @get_vq_irq: Get the irq number of a virtqueue (optional,
* but must implemented if require vq irq offloading)
* @vdev: vdpa device
* @idx: virtqueue index
* Returns int: irq number of a virtqueue,
* negative number if no irq assigned.
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
* @get_vq_align: Get the virtqueue align requirement
* for the device
* @vdev: vdpa device
* Returns virtqueue algin requirement
* @get_features: Get virtio features supported by the device
* @vdev: vdpa device
* Returns the virtio features support by the
* device
* @set_features: Set virtio features supported by the driver
* @vdev: vdpa device
* @features: feature support by the driver
* Returns integer: success (0) or error (< 0)
* @set_config_cb: Set the config interrupt callback
* @vdev: vdpa device
* @cb: virtio-vdev interrupt callback structure
* @get_vq_num_max: Get the max size of virtqueue
* @vdev: vdpa device
* Returns u16: max size of virtqueue
* @get_device_id: Get virtio device id
* @vdev: vdpa device
* Returns u32: virtio device id
* @get_vendor_id: Get id for the vendor that provides this device
* @vdev: vdpa device
* Returns u32: virtio vendor id
* @get_status: Get the device status
* @vdev: vdpa device
* Returns u8: virtio device status
* @set_status: Set the device status
* @vdev: vdpa device
* @status: virtio device status
* @get_config: Read from device specific configuration space
* @vdev: vdpa device
* @offset: offset from the beginning of
* configuration space
* @buf: buffer used to read to
* @len: the length to read from
* configuration space
* @set_config: Write to device specific configuration space
* @vdev: vdpa device
* @offset: offset from the beginning of
* configuration space
* @buf: buffer used to write from
* @len: the length to write to
* configuration space
* @get_generation: Get device config generation (optional)
* @vdev: vdpa device
* Returns u32: device generation
* @set_map: Set device memory mapping (optional)
* Needed for device that using device
* specific DMA translation (on-chip IOMMU)
* @vdev: vdpa device
* @iotlb: vhost memory mapping to be
* used by the vDPA
* Returns integer: success (0) or error (< 0)
* @dma_map: Map an area of PA to IOVA (optional)
* Needed for device that using device
* specific DMA translation (on-chip IOMMU)
* and preferring incremental map.
* @vdev: vdpa device
* @iova: iova to be mapped
* @size: size of the area
* @pa: physical address for the map
* @perm: device access permission (VHOST_MAP_XX)
* Returns integer: success (0) or error (< 0)
* @dma_unmap: Unmap an area of IOVA (optional but
* must be implemented with dma_map)
* Needed for device that using device
* specific DMA translation (on-chip IOMMU)
* and preferring incremental unmap.
* @vdev: vdpa device
* @iova: iova to be unmapped
* @size: size of the area
* Returns integer: success (0) or error (< 0)
* @free: Free resources that belongs to vDPA (optional)
* @vdev: vdpa device
*/
struct vdpa_config_ops {
/* Virtqueue ops */
int (*set_vq_address)(struct vdpa_device *vdev,
u16 idx, u64 desc_area, u64 driver_area,
u64 device_area);
void (*set_vq_num)(struct vdpa_device *vdev, u16 idx, u32 num);
void (*kick_vq)(struct vdpa_device *vdev, u16 idx);
void (*set_vq_cb)(struct vdpa_device *vdev, u16 idx,
struct vdpa_callback *cb);
void (*set_vq_ready)(struct vdpa_device *vdev, u16 idx, bool ready);
bool (*get_vq_ready)(struct vdpa_device *vdev, u16 idx);
net/vdpa: Use struct for set/get vq state For now VQ state involves 16 bit available index value encoded in u64 variable. In the future it will be extended to contain more fields. Use struct to contain the state, now containing only a single u16 for the available index. In the future we can add fields to this struct. Reviewed-by: Parav Pandit <parav@mellanox.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Link: https://lore.kernel.org/r/20200804162048.22587-8-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-05 00:20:43 +08:00
int (*set_vq_state)(struct vdpa_device *vdev, u16 idx,
const struct vdpa_vq_state *state);
void (*get_vq_state)(struct vdpa_device *vdev, u16 idx,
struct vdpa_vq_state *state);
vdpa: introduce get_vq_notification method This patch introduces a new method in the vdpa_config_ops which reports the physical address and the size of the doorbell for a specific virtqueue. This will be used by the future patches that maps doorbell to userspace. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200529080303.15449-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-29 16:03:00 +08:00
struct vdpa_notification_area
(*get_vq_notification)(struct vdpa_device *vdev, u16 idx);
vDPA: dont change vq irq after DRIVER_OK IRQ of a vq is not expected to be changed in a DRIVER_OK ~ !DRIVER_OK period for irq offloading purposes. Place this comment at the side of bus ops get_vq_irq than in set_status in vhost_vdpa. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Link: https://lore.kernel.org/r/20200804102123.69978-1-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-04 18:21:23 +08:00
/* vq irq is not expected to be changed once DRIVER_OK is set */
vDPA: add get_vq_irq() in vdpa_config_ops This commit adds a new function get_vq_irq() in struct vdpa_config_ops, which will return the irq number of a virtqueue. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Suggested-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200731065533.4144-4-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-31 14:55:30 +08:00
int (*get_vq_irq)(struct vdpa_device *vdv, u16 idx);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
/* Device ops */
vdpa: allow a 32 bit vq alignment get_vq_align returns u16 now, but that's not enough for systems/devices with 64K pages. All callers assign it to a u32 variable anyway, so let's just change the return value type to u32. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-10 04:26:21 +08:00
u32 (*get_vq_align)(struct vdpa_device *vdev);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
u64 (*get_features)(struct vdpa_device *vdev);
int (*set_features)(struct vdpa_device *vdev, u64 features);
void (*set_config_cb)(struct vdpa_device *vdev,
struct vdpa_callback *cb);
u16 (*get_vq_num_max)(struct vdpa_device *vdev);
u32 (*get_device_id)(struct vdpa_device *vdev);
u32 (*get_vendor_id)(struct vdpa_device *vdev);
u8 (*get_status)(struct vdpa_device *vdev);
void (*set_status)(struct vdpa_device *vdev, u8 status);
void (*get_config)(struct vdpa_device *vdev, unsigned int offset,
void *buf, unsigned int len);
void (*set_config)(struct vdpa_device *vdev, unsigned int offset,
const void *buf, unsigned int len);
u32 (*get_generation)(struct vdpa_device *vdev);
/* DMA ops */
int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb);
int (*dma_map)(struct vdpa_device *vdev, u64 iova, u64 size,
u64 pa, u32 perm);
int (*dma_unmap)(struct vdpa_device *vdev, u64 iova, u64 size);
/* Free device resources */
void (*free)(struct vdpa_device *vdev);
};
struct vdpa_device *__vdpa_alloc_device(struct device *parent,
const struct vdpa_config_ops *config,
vdpa: remove hard coded virtq num This will enable vdpa providers to add support for multi queue feature and publish it to upper layers (vhost and virtio). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200804162048.22587-7-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-05 00:20:42 +08:00
int nvqs,
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
size_t size);
vdpa: remove hard coded virtq num This will enable vdpa providers to add support for multi queue feature and publish it to upper layers (vhost and virtio). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200804162048.22587-7-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-05 00:20:42 +08:00
#define vdpa_alloc_device(dev_struct, member, parent, config, nvqs) \
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
container_of(__vdpa_alloc_device( \
vdpa: remove hard coded virtq num This will enable vdpa providers to add support for multi queue feature and publish it to upper layers (vhost and virtio). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200804162048.22587-7-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-05 00:20:42 +08:00
parent, config, nvqs, \
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
sizeof(dev_struct) + \
BUILD_BUG_ON_ZERO(offsetof( \
dev_struct, member))), \
dev_struct, member)
int vdpa_register_device(struct vdpa_device *vdev);
void vdpa_unregister_device(struct vdpa_device *vdev);
/**
* vdpa_driver - operations for a vDPA driver
* @driver: underlying device driver
* @probe: the function to call when a device is found. Returns 0 or -errno.
* @remove: the function to call when a device is removed.
*/
struct vdpa_driver {
struct device_driver driver;
int (*probe)(struct vdpa_device *vdev);
void (*remove)(struct vdpa_device *vdev);
};
#define vdpa_register_driver(drv) \
__vdpa_register_driver(drv, THIS_MODULE)
int __vdpa_register_driver(struct vdpa_driver *drv, struct module *owner);
void vdpa_unregister_driver(struct vdpa_driver *drv);
#define module_vdpa_driver(__vdpa_driver) \
module_driver(__vdpa_driver, vdpa_register_driver, \
vdpa_unregister_driver)
static inline struct vdpa_driver *drv_to_vdpa(struct device_driver *driver)
{
return container_of(driver, struct vdpa_driver, driver);
}
static inline struct vdpa_device *dev_to_vdpa(struct device *_dev)
{
return container_of(_dev, struct vdpa_device, dev);
}
static inline void *vdpa_get_drvdata(const struct vdpa_device *vdev)
{
return dev_get_drvdata(&vdev->dev);
}
static inline void vdpa_set_drvdata(struct vdpa_device *vdev, void *data)
{
dev_set_drvdata(&vdev->dev, data);
}
static inline struct device *vdpa_get_dma_dev(struct vdpa_device *vdev)
{
return vdev->dma_dev;
}
vdpa: make sure set_features is invoked for legacy Some legacy guests just assume features are 0 after reset. We detect that config space is accessed before features are set and set features to 0 automatically. Note: some legacy guests might not even access config space, if this is reported in the field we might need to catch a kick to handle these. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-27 22:51:55 +08:00
static inline void vdpa_reset(struct vdpa_device *vdev)
{
const struct vdpa_config_ops *ops = vdev->config;
vdev->features_valid = false;
ops->set_status(vdev, 0);
}
static inline int vdpa_set_features(struct vdpa_device *vdev, u64 features)
{
const struct vdpa_config_ops *ops = vdev->config;
vdev->features_valid = true;
return ops->set_features(vdev, features);
}
static inline void vdpa_get_config(struct vdpa_device *vdev, unsigned offset,
void *buf, unsigned int len)
{
const struct vdpa_config_ops *ops = vdev->config;
/*
* Config accesses aren't supposed to trigger before features are set.
* If it does happen we assume a legacy guest.
*/
if (!vdev->features_valid)
vdpa_set_features(vdev, 0);
ops->get_config(vdev, offset, buf, len);
}
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:21 +08:00
#endif /* _LINUX_VDPA_H */