OpenCloudOS-Kernel/arch/sparc/kernel/leon_kernel.c

502 lines
13 KiB
C
Raw Normal View History

/*
* Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
* Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <asm/oplib.h>
#include <asm/timer.h>
#include <asm/prom.h>
#include <asm/leon.h>
#include <asm/leon_amba.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
#include <asm/smp.h>
#include <asm/setup.h>
#include "prom.h"
#include "irq.h"
struct leon3_irqctrl_regs_map *leon3_irqctrl_regs; /* interrupt controller base address */
struct leon3_gptimer_regs_map *leon3_gptimer_regs; /* timer controller base address */
int leondebug_irq_disable;
int leon_debug_irqout;
static int dummy_master_l10_counter;
unsigned long amba_system_id;
static DEFINE_SPINLOCK(leon_irq_lock);
unsigned long leon3_gptimer_irq; /* interrupt controller irq number */
unsigned long leon3_gptimer_idx; /* Timer Index (0..6) within Timer Core */
int leon3_ticker_irq; /* Timer ticker IRQ */
unsigned int sparc_leon_eirq;
#define LEON_IMASK(cpu) (&leon3_irqctrl_regs->mask[cpu])
#define LEON_IACK (&leon3_irqctrl_regs->iclear)
#define LEON_DO_ACK_HW 1
/* Return the last ACKed IRQ by the Extended IRQ controller. It has already
* been (automatically) ACKed when the CPU takes the trap.
*/
static inline unsigned int leon_eirq_get(int cpu)
{
return LEON3_BYPASS_LOAD_PA(&leon3_irqctrl_regs->intid[cpu]) & 0x1f;
}
/* Handle one or multiple IRQs from the extended interrupt controller */
static void leon_handle_ext_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int eirq;
int cpu = sparc_leon3_cpuid();
eirq = leon_eirq_get(cpu);
if ((eirq & 0x10) && irq_map[eirq]->irq) /* bit4 tells if IRQ happened */
generic_handle_irq(irq_map[eirq]->irq);
}
/* The extended IRQ controller has been found, this function registers it */
void leon_eirq_setup(unsigned int eirq)
{
unsigned long mask, oldmask;
unsigned int veirq;
if (eirq < 1 || eirq > 0xf) {
printk(KERN_ERR "LEON EXT IRQ NUMBER BAD: %d\n", eirq);
return;
}
veirq = leon_build_device_irq(eirq, leon_handle_ext_irq, "extirq", 0);
/*
* Unmask the Extended IRQ, the IRQs routed through the Ext-IRQ
* controller have a mask-bit of their own, so this is safe.
*/
irq_link(veirq);
mask = 1 << eirq;
oldmask = LEON3_BYPASS_LOAD_PA(LEON_IMASK(boot_cpu_id));
LEON3_BYPASS_STORE_PA(LEON_IMASK(boot_cpu_id), (oldmask | mask));
sparc_leon_eirq = eirq;
}
static inline unsigned long get_irqmask(unsigned int irq)
{
unsigned long mask;
if (!irq || ((irq > 0xf) && !sparc_leon_eirq)
|| ((irq > 0x1f) && sparc_leon_eirq)) {
printk(KERN_ERR
"leon_get_irqmask: false irq number: %d\n", irq);
mask = 0;
} else {
mask = LEON_HARD_INT(irq);
}
return mask;
}
#ifdef CONFIG_SMP
static int irq_choose_cpu(const struct cpumask *affinity)
{
cpumask_t mask;
cpus_and(mask, cpu_online_map, *affinity);
if (cpus_equal(mask, cpu_online_map) || cpus_empty(mask))
return boot_cpu_id;
else
return first_cpu(mask);
}
#else
#define irq_choose_cpu(affinity) boot_cpu_id
#endif
static int leon_set_affinity(struct irq_data *data, const struct cpumask *dest,
bool force)
{
unsigned long mask, oldmask, flags;
int oldcpu, newcpu;
mask = (unsigned long)data->chip_data;
oldcpu = irq_choose_cpu(data->affinity);
newcpu = irq_choose_cpu(dest);
if (oldcpu == newcpu)
goto out;
/* unmask on old CPU first before enabling on the selected CPU */
spin_lock_irqsave(&leon_irq_lock, flags);
oldmask = LEON3_BYPASS_LOAD_PA(LEON_IMASK(oldcpu));
LEON3_BYPASS_STORE_PA(LEON_IMASK(oldcpu), (oldmask & ~mask));
oldmask = LEON3_BYPASS_LOAD_PA(LEON_IMASK(newcpu));
LEON3_BYPASS_STORE_PA(LEON_IMASK(newcpu), (oldmask | mask));
spin_unlock_irqrestore(&leon_irq_lock, flags);
out:
return IRQ_SET_MASK_OK;
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
static void leon_unmask_irq(struct irq_data *data)
{
unsigned long mask, oldmask, flags;
int cpu;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
mask = (unsigned long)data->chip_data;
cpu = irq_choose_cpu(data->affinity);
spin_lock_irqsave(&leon_irq_lock, flags);
oldmask = LEON3_BYPASS_LOAD_PA(LEON_IMASK(cpu));
LEON3_BYPASS_STORE_PA(LEON_IMASK(cpu), (oldmask | mask));
spin_unlock_irqrestore(&leon_irq_lock, flags);
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
static void leon_mask_irq(struct irq_data *data)
{
unsigned long mask, oldmask, flags;
int cpu;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
mask = (unsigned long)data->chip_data;
cpu = irq_choose_cpu(data->affinity);
spin_lock_irqsave(&leon_irq_lock, flags);
oldmask = LEON3_BYPASS_LOAD_PA(LEON_IMASK(cpu));
LEON3_BYPASS_STORE_PA(LEON_IMASK(cpu), (oldmask & ~mask));
spin_unlock_irqrestore(&leon_irq_lock, flags);
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
static unsigned int leon_startup_irq(struct irq_data *data)
{
irq_link(data->irq);
leon_unmask_irq(data);
return 0;
}
static void leon_shutdown_irq(struct irq_data *data)
{
leon_mask_irq(data);
irq_unlink(data->irq);
}
/* Used by external level sensitive IRQ handlers on the LEON: ACK IRQ ctrl */
static void leon_eoi_irq(struct irq_data *data)
{
unsigned long mask = (unsigned long)data->chip_data;
if (mask & LEON_DO_ACK_HW)
LEON3_BYPASS_STORE_PA(LEON_IACK, mask & ~LEON_DO_ACK_HW);
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
static struct irq_chip leon_irq = {
.name = "leon",
.irq_startup = leon_startup_irq,
.irq_shutdown = leon_shutdown_irq,
.irq_mask = leon_mask_irq,
.irq_unmask = leon_unmask_irq,
.irq_eoi = leon_eoi_irq,
.irq_set_affinity = leon_set_affinity,
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
};
/*
* Build a LEON IRQ for the edge triggered LEON IRQ controller:
* Edge (normal) IRQ - handle_simple_irq, ack=DONT-CARE, never ack
* Level IRQ (PCI|Level-GPIO) - handle_fasteoi_irq, ack=1, ack after ISR
* Per-CPU Edge - handle_percpu_irq, ack=0
*/
unsigned int leon_build_device_irq(unsigned int real_irq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack)
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
{
unsigned int irq;
unsigned long mask;
irq = 0;
mask = get_irqmask(real_irq);
if (mask == 0)
goto out;
irq = irq_alloc(real_irq, real_irq);
if (irq == 0)
goto out;
if (do_ack)
mask |= LEON_DO_ACK_HW;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
irq_set_chip_and_handler_name(irq, &leon_irq,
flow_handler, name);
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
irq_set_chip_data(irq, (void *)mask);
out:
return irq;
}
static unsigned int _leon_build_device_irq(struct platform_device *op,
unsigned int real_irq)
{
return leon_build_device_irq(real_irq, handle_simple_irq, "edge", 0);
}
void leon_update_virq_handling(unsigned int virq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack)
{
unsigned long mask = (unsigned long)irq_get_chip_data(virq);
mask &= ~LEON_DO_ACK_HW;
if (do_ack)
mask |= LEON_DO_ACK_HW;
irq_set_chip_and_handler_name(virq, &leon_irq,
flow_handler, name);
irq_set_chip_data(virq, (void *)mask);
}
void __init leon_init_timers(irq_handler_t counter_fn)
{
int irq, eirq;
struct device_node *rootnp, *np, *nnp;
struct property *pp;
int len;
int icsel;
int ampopts;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
int err;
leondebug_irq_disable = 0;
leon_debug_irqout = 0;
master_l10_counter = (unsigned int *)&dummy_master_l10_counter;
dummy_master_l10_counter = 0;
rootnp = of_find_node_by_path("/ambapp0");
if (!rootnp)
goto bad;
/* Find System ID: GRLIB build ID and optional CHIP ID */
pp = of_find_property(rootnp, "systemid", &len);
if (pp)
amba_system_id = *(unsigned long *)pp->value;
/* Find IRQMP IRQ Controller Registers base adr otherwise bail out */
np = of_find_node_by_name(rootnp, "GAISLER_IRQMP");
if (!np) {
np = of_find_node_by_name(rootnp, "01_00d");
if (!np)
goto bad;
}
pp = of_find_property(np, "reg", &len);
if (!pp)
goto bad;
leon3_irqctrl_regs = *(struct leon3_irqctrl_regs_map **)pp->value;
/* Find GPTIMER Timer Registers base address otherwise bail out. */
nnp = rootnp;
do {
np = of_find_node_by_name(nnp, "GAISLER_GPTIMER");
if (!np) {
np = of_find_node_by_name(nnp, "01_011");
if (!np)
goto bad;
}
ampopts = 0;
pp = of_find_property(np, "ampopts", &len);
if (pp) {
ampopts = *(int *)pp->value;
if (ampopts == 0) {
/* Skip this instance, resource already
* allocated by other OS */
nnp = np;
continue;
}
}
/* Select Timer-Instance on Timer Core. Default is zero */
leon3_gptimer_idx = ampopts & 0x7;
pp = of_find_property(np, "reg", &len);
if (pp)
leon3_gptimer_regs = *(struct leon3_gptimer_regs_map **)
pp->value;
pp = of_find_property(np, "interrupts", &len);
if (pp)
leon3_gptimer_irq = *(unsigned int *)pp->value;
} while (0);
if (!(leon3_gptimer_regs && leon3_irqctrl_regs && leon3_gptimer_irq))
goto bad;
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].val, 0);
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].rld,
(((1000000 / HZ) - 1)));
LEON3_BYPASS_STORE_PA(
&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, 0);
#ifdef CONFIG_SMP
leon3_ticker_irq = leon3_gptimer_irq + 1 + leon3_gptimer_idx;
if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
(1<<LEON3_GPTIMER_SEPIRQ))) {
printk(KERN_ERR "timer not configured with separate irqs\n");
BUG();
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].val,
0);
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].rld,
(((1000000/HZ) - 1)));
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl,
0);
#endif
/*
* The IRQ controller may (if implemented) consist of multiple
* IRQ controllers, each mapped on a 4Kb boundary.
* Each CPU may be routed to different IRQCTRLs, however
* we assume that all CPUs (in SMP system) is routed to the
* same IRQ Controller, and for non-SMP only one IRQCTRL is
* accessed anyway.
* In AMP systems, Linux must run on CPU0 for the time being.
*/
icsel = LEON3_BYPASS_LOAD_PA(&leon3_irqctrl_regs->icsel[boot_cpu_id/8]);
icsel = (icsel >> ((7 - (boot_cpu_id&0x7)) * 4)) & 0xf;
leon3_irqctrl_regs += icsel;
/* Mask all IRQs on boot-cpu IRQ controller */
LEON3_BYPASS_STORE_PA(&leon3_irqctrl_regs->mask[boot_cpu_id], 0);
/* Probe extended IRQ controller */
eirq = (LEON3_BYPASS_LOAD_PA(&leon3_irqctrl_regs->mpstatus)
>> 16) & 0xf;
if (eirq != 0)
leon_eirq_setup(eirq);
irq = _leon_build_device_irq(NULL, leon3_gptimer_irq+leon3_gptimer_idx);
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
err = request_irq(irq, counter_fn, IRQF_TIMER, "timer", NULL);
if (err) {
printk(KERN_ERR "unable to attach timer IRQ%d\n", irq);
prom_halt();
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl,
LEON3_GPTIMER_EN |
LEON3_GPTIMER_RL |
LEON3_GPTIMER_LD |
LEON3_GPTIMER_IRQEN);
#ifdef CONFIG_SMP
/* Install per-cpu IRQ handler for broadcasted ticker */
irq = leon_build_device_irq(leon3_ticker_irq, handle_percpu_irq,
"per-cpu", 0);
err = request_irq(irq, leon_percpu_timer_interrupt,
IRQF_PERCPU | IRQF_TIMER, "ticker",
NULL);
if (err) {
printk(KERN_ERR "unable to attach ticker IRQ%d\n", irq);
prom_halt();
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl,
LEON3_GPTIMER_EN |
LEON3_GPTIMER_RL |
LEON3_GPTIMER_LD |
LEON3_GPTIMER_IRQEN);
#endif
return;
bad:
printk(KERN_ERR "No Timer/irqctrl found\n");
BUG();
return;
}
void leon_clear_clock_irq(void)
{
}
void leon_load_profile_irq(int cpu, unsigned int limit)
{
BUG();
}
void __init leon_trans_init(struct device_node *dp)
{
if (strcmp(dp->type, "cpu") == 0 && strcmp(dp->name, "<NULL>") == 0) {
struct property *p;
p = of_find_property(dp, "mid", (void *)0);
if (p) {
int mid;
dp->name = prom_early_alloc(5 + 1);
memcpy(&mid, p->value, p->length);
sprintf((char *)dp->name, "cpu%.2d", mid);
}
}
}
void __initdata (*prom_amba_init)(struct device_node *dp, struct device_node ***nextp) = 0;
void __init leon_node_init(struct device_node *dp, struct device_node ***nextp)
{
if (prom_amba_init &&
strcmp(dp->type, "ambapp") == 0 &&
strcmp(dp->name, "ambapp0") == 0) {
prom_amba_init(dp, nextp);
}
}
#ifdef CONFIG_SMP
void leon_set_cpu_int(int cpu, int level)
{
unsigned long mask;
mask = get_irqmask(level);
LEON3_BYPASS_STORE_PA(&leon3_irqctrl_regs->force[cpu], mask);
}
static void leon_clear_ipi(int cpu, int level)
{
unsigned long mask;
mask = get_irqmask(level);
LEON3_BYPASS_STORE_PA(&leon3_irqctrl_regs->force[cpu], mask<<16);
}
static void leon_set_udt(int cpu)
{
}
void leon_clear_profile_irq(int cpu)
{
}
void leon_enable_irq_cpu(unsigned int irq_nr, unsigned int cpu)
{
unsigned long mask, flags, *addr;
mask = get_irqmask(irq_nr);
spin_lock_irqsave(&leon_irq_lock, flags);
addr = (unsigned long *)LEON_IMASK(cpu);
LEON3_BYPASS_STORE_PA(addr, (LEON3_BYPASS_LOAD_PA(addr) | mask));
spin_unlock_irqrestore(&leon_irq_lock, flags);
}
#endif
void __init leon_init_IRQ(void)
{
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
sparc_irq_config.init_timers = leon_init_timers;
sparc_irq_config.build_device_irq = _leon_build_device_irq;
BTFIXUPSET_CALL(clear_clock_irq, leon_clear_clock_irq,
BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, leon_load_profile_irq,
BTFIXUPCALL_NOP);
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, leon_set_cpu_int, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_cpu_int, leon_clear_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(set_irq_udt, leon_set_udt, BTFIXUPCALL_NORM);
#endif
}
void __init leon_init(void)
{
of_pdt_build_more = &leon_node_init;
}