UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/asm-generic/export.h

97 lines
2.1 KiB
C
Raw Normal View History

EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#ifndef __ASM_GENERIC_EXPORT_H
#define __ASM_GENERIC_EXPORT_H
#ifndef KSYM_FUNC
#define KSYM_FUNC(x) x
#endif
#ifdef CONFIG_64BIT
#ifndef KSYM_ALIGN
#define KSYM_ALIGN 8
#endif
#else
#ifndef KSYM_ALIGN
#define KSYM_ALIGN 4
#endif
modversions: treat symbol CRCs as 32 bit quantities The modversion symbol CRCs are emitted as ELF symbols, which allows us to easily populate the kcrctab sections by relying on the linker to associate each kcrctab slot with the correct value. This has a couple of downsides: - Given that the CRCs are treated as memory addresses, we waste 4 bytes for each CRC on 64 bit architectures, - On architectures that support runtime relocation, a R_<arch>_RELATIVE relocation entry is emitted for each CRC value, which identifies it as a quantity that requires fixing up based on the actual runtime load offset of the kernel. This results in corrupted CRCs unless we explicitly undo the fixup (and this is currently being handled in the core module code) - Such runtime relocation entries take up 24 bytes of __init space each, resulting in a x8 overhead in [uncompressed] kernel size for CRCs. Switching to explicit 32 bit values on 64 bit architectures fixes most of these issues, given that 32 bit values are not treated as quantities that require fixing up based on the actual runtime load offset. Note that on some ELF64 architectures [such as PPC64], these 32-bit values are still emitted as [absolute] runtime relocatable quantities, even if the value resolves to a build time constant. Since relative relocations are always resolved at build time, this patch enables MODULE_REL_CRCS on powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC references into relative references into .rodata where the actual CRC value is stored. So redefine all CRC fields and variables as u32, and redefine the __CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using inline assembler (which is necessary since 64-bit C code cannot use 32-bit types to hold memory addresses, even if they are ultimately resolved using values that do not exceed 0xffffffff). To avoid potential problems with legacy 32-bit architectures using legacy toolchains, the equivalent C definition of the kcrctab entry is retained for 32-bit architectures. Note that this mostly reverts commit d4703aefdbc8 ("module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y") Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-03 17:54:06 +08:00
#endif
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#ifndef KCRC_ALIGN
#define KCRC_ALIGN 4
#endif
module: use relative references for __ksymtab entries An ordinary arm64 defconfig build has ~64 KB worth of __ksymtab entries, each consisting of two 64-bit fields containing absolute references, to the symbol itself and to a char array containing its name, respectively. When we build the same configuration with KASLR enabled, we end up with an additional ~192 KB of relocations in the .init section, i.e., one 24 byte entry for each absolute reference, which all need to be processed at boot time. Given how the struct kernel_symbol that describes each entry is completely local to module.c (except for the references emitted by EXPORT_SYMBOL() itself), we can easily modify it to contain two 32-bit relative references instead. This reduces the size of the __ksymtab section by 50% for all 64-bit architectures, and gets rid of the runtime relocations entirely for architectures implementing KASLR, either via standard PIE linking (arm64) or using custom host tools (x86). Note that the binary search involving __ksymtab contents relies on each section being sorted by symbol name. This is implemented based on the input section names, not the names in the ksymtab entries, so this patch does not interfere with that. Given that the use of place-relative relocations requires support both in the toolchain and in the module loader, we cannot enable this feature for all architectures. So make it dependent on whether CONFIG_HAVE_ARCH_PREL32_RELOCATIONS is defined. Link: http://lkml.kernel.org/r/20180704083651.24360-4-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jessica Yu <jeyu@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 12:56:09 +08:00
.macro __put, val, name
#ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
.long \val - ., \name - .
#elif defined(CONFIG_64BIT)
.quad \val, \name
#else
.long \val, \name
#endif
.endm
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
/*
* note on .section use: @progbits vs %progbits nastiness doesn't matter,
* since we immediately emit into those sections anyway.
*/
.macro ___EXPORT_SYMBOL name,val,sec
#ifdef CONFIG_MODULES
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
.globl __ksymtab_\name
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
.section ___ksymtab\sec+\name,"a"
.balign KSYM_ALIGN
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
__ksymtab_\name:
__put \val, __kstrtab_\name
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
.previous
.section __ksymtab_strings,"a"
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
__kstrtab_\name:
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
.asciz "\name"
.previous
#ifdef CONFIG_MODVERSIONS
.section ___kcrctab\sec+\name,"a"
.balign KCRC_ALIGN
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
__kcrctab_\name:
modversions: treat symbol CRCs as 32 bit quantities The modversion symbol CRCs are emitted as ELF symbols, which allows us to easily populate the kcrctab sections by relying on the linker to associate each kcrctab slot with the correct value. This has a couple of downsides: - Given that the CRCs are treated as memory addresses, we waste 4 bytes for each CRC on 64 bit architectures, - On architectures that support runtime relocation, a R_<arch>_RELATIVE relocation entry is emitted for each CRC value, which identifies it as a quantity that requires fixing up based on the actual runtime load offset of the kernel. This results in corrupted CRCs unless we explicitly undo the fixup (and this is currently being handled in the core module code) - Such runtime relocation entries take up 24 bytes of __init space each, resulting in a x8 overhead in [uncompressed] kernel size for CRCs. Switching to explicit 32 bit values on 64 bit architectures fixes most of these issues, given that 32 bit values are not treated as quantities that require fixing up based on the actual runtime load offset. Note that on some ELF64 architectures [such as PPC64], these 32-bit values are still emitted as [absolute] runtime relocatable quantities, even if the value resolves to a build time constant. Since relative relocations are always resolved at build time, this patch enables MODULE_REL_CRCS on powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC references into relative references into .rodata where the actual CRC value is stored. So redefine all CRC fields and variables as u32, and redefine the __CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using inline assembler (which is necessary since 64-bit C code cannot use 32-bit types to hold memory addresses, even if they are ultimately resolved using values that do not exceed 0xffffffff). To avoid potential problems with legacy 32-bit architectures using legacy toolchains, the equivalent C definition of the kcrctab entry is retained for 32-bit architectures. Note that this mostly reverts commit d4703aefdbc8 ("module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y") Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-03 17:54:06 +08:00
#if defined(CONFIG_MODULE_REL_CRCS)
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
.long __crc_\name - .
modversions: treat symbol CRCs as 32 bit quantities The modversion symbol CRCs are emitted as ELF symbols, which allows us to easily populate the kcrctab sections by relying on the linker to associate each kcrctab slot with the correct value. This has a couple of downsides: - Given that the CRCs are treated as memory addresses, we waste 4 bytes for each CRC on 64 bit architectures, - On architectures that support runtime relocation, a R_<arch>_RELATIVE relocation entry is emitted for each CRC value, which identifies it as a quantity that requires fixing up based on the actual runtime load offset of the kernel. This results in corrupted CRCs unless we explicitly undo the fixup (and this is currently being handled in the core module code) - Such runtime relocation entries take up 24 bytes of __init space each, resulting in a x8 overhead in [uncompressed] kernel size for CRCs. Switching to explicit 32 bit values on 64 bit architectures fixes most of these issues, given that 32 bit values are not treated as quantities that require fixing up based on the actual runtime load offset. Note that on some ELF64 architectures [such as PPC64], these 32-bit values are still emitted as [absolute] runtime relocatable quantities, even if the value resolves to a build time constant. Since relative relocations are always resolved at build time, this patch enables MODULE_REL_CRCS on powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC references into relative references into .rodata where the actual CRC value is stored. So redefine all CRC fields and variables as u32, and redefine the __CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using inline assembler (which is necessary since 64-bit C code cannot use 32-bit types to hold memory addresses, even if they are ultimately resolved using values that do not exceed 0xffffffff). To avoid potential problems with legacy 32-bit architectures using legacy toolchains, the equivalent C definition of the kcrctab entry is retained for 32-bit architectures. Note that this mostly reverts commit d4703aefdbc8 ("module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y") Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-03 17:54:06 +08:00
#else
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
.long __crc_\name
modversions: treat symbol CRCs as 32 bit quantities The modversion symbol CRCs are emitted as ELF symbols, which allows us to easily populate the kcrctab sections by relying on the linker to associate each kcrctab slot with the correct value. This has a couple of downsides: - Given that the CRCs are treated as memory addresses, we waste 4 bytes for each CRC on 64 bit architectures, - On architectures that support runtime relocation, a R_<arch>_RELATIVE relocation entry is emitted for each CRC value, which identifies it as a quantity that requires fixing up based on the actual runtime load offset of the kernel. This results in corrupted CRCs unless we explicitly undo the fixup (and this is currently being handled in the core module code) - Such runtime relocation entries take up 24 bytes of __init space each, resulting in a x8 overhead in [uncompressed] kernel size for CRCs. Switching to explicit 32 bit values on 64 bit architectures fixes most of these issues, given that 32 bit values are not treated as quantities that require fixing up based on the actual runtime load offset. Note that on some ELF64 architectures [such as PPC64], these 32-bit values are still emitted as [absolute] runtime relocatable quantities, even if the value resolves to a build time constant. Since relative relocations are always resolved at build time, this patch enables MODULE_REL_CRCS on powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC references into relative references into .rodata where the actual CRC value is stored. So redefine all CRC fields and variables as u32, and redefine the __CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using inline assembler (which is necessary since 64-bit C code cannot use 32-bit types to hold memory addresses, even if they are ultimately resolved using values that do not exceed 0xffffffff). To avoid potential problems with legacy 32-bit architectures using legacy toolchains, the equivalent C definition of the kcrctab entry is retained for 32-bit architectures. Note that this mostly reverts commit d4703aefdbc8 ("module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y") Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-03 17:54:06 +08:00
#endif
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
.weak __crc_\name
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
.previous
#endif
#endif
.endm
#undef __put
kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS My main motivation of this commit is to clean up scripts/Kbuild.include and scripts/Makefile.build. Currently, CONFIG_TRIM_UNUSED_KSYMS works with a tricky gimmick; possibly exported symbols are detected by letting $(CPP) replace EXPORT_SYMBOL* with a special string '=== __KSYM_*===', which is post-processed by sed, and passed to fixdep. The extra preprocessing is costly, and hacking cmd_and_fixdep is ugly. I came up with a new way to find exported symbols; insert a dummy symbol __ksym_marker_* to each potentially exported symbol. Those dummy symbols are picked up by $(NM), post-processed by sed, then appended to .*.cmd files. I collected the post-process part to a new shell script scripts/gen_ksymdeps.sh for readability. The dummy symbols are put into the .discard.* section so that the linker script rips them off the final vmlinux or modules. A nice side-effect is building with CONFIG_TRIM_UNUSED_KSYMS will be much faster. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nicolas Pitre <nico@linaro.org>
2018-11-30 09:05:26 +08:00
#if defined(CONFIG_TRIM_UNUSED_KSYMS)
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#include <linux/kconfig.h>
#include <generated/autoksyms.h>
kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS My main motivation of this commit is to clean up scripts/Kbuild.include and scripts/Makefile.build. Currently, CONFIG_TRIM_UNUSED_KSYMS works with a tricky gimmick; possibly exported symbols are detected by letting $(CPP) replace EXPORT_SYMBOL* with a special string '=== __KSYM_*===', which is post-processed by sed, and passed to fixdep. The extra preprocessing is costly, and hacking cmd_and_fixdep is ugly. I came up with a new way to find exported symbols; insert a dummy symbol __ksym_marker_* to each potentially exported symbol. Those dummy symbols are picked up by $(NM), post-processed by sed, then appended to .*.cmd files. I collected the post-process part to a new shell script scripts/gen_ksymdeps.sh for readability. The dummy symbols are put into the .discard.* section so that the linker script rips them off the final vmlinux or modules. A nice side-effect is building with CONFIG_TRIM_UNUSED_KSYMS will be much faster. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nicolas Pitre <nico@linaro.org>
2018-11-30 09:05:26 +08:00
.macro __ksym_marker sym
.section ".discard.ksym","a"
__ksym_marker_\sym:
.previous
.endm
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#define __EXPORT_SYMBOL(sym, val, sec) \
kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS My main motivation of this commit is to clean up scripts/Kbuild.include and scripts/Makefile.build. Currently, CONFIG_TRIM_UNUSED_KSYMS works with a tricky gimmick; possibly exported symbols are detected by letting $(CPP) replace EXPORT_SYMBOL* with a special string '=== __KSYM_*===', which is post-processed by sed, and passed to fixdep. The extra preprocessing is costly, and hacking cmd_and_fixdep is ugly. I came up with a new way to find exported symbols; insert a dummy symbol __ksym_marker_* to each potentially exported symbol. Those dummy symbols are picked up by $(NM), post-processed by sed, then appended to .*.cmd files. I collected the post-process part to a new shell script scripts/gen_ksymdeps.sh for readability. The dummy symbols are put into the .discard.* section so that the linker script rips them off the final vmlinux or modules. A nice side-effect is building with CONFIG_TRIM_UNUSED_KSYMS will be much faster. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nicolas Pitre <nico@linaro.org>
2018-11-30 09:05:26 +08:00
__ksym_marker sym; \
kconfig.h: remove config_enabled() macro The use of config_enabled() is ambiguous. For config options, IS_ENABLED(), IS_REACHABLE(), etc. will make intention clearer. Sometimes config_enabled() has been used for non-config options because it is useful to check whether the given symbol is defined or not. I have been tackling on deprecating config_enabled(), and now is the time to finish this work. Some new users have appeared for v4.9-rc1, but it is trivial to replace them: - arch/x86/mm/kaslr.c replace config_enabled() with IS_ENABLED() because CONFIG_X86_ESPFIX64 and CONFIG_EFI are boolean. - include/asm-generic/export.h replace config_enabled() with __is_defined(). Then, config_enabled() can be removed now. Going forward, please use IS_ENABLED(), IS_REACHABLE(), etc. for config options, and __is_defined() for non-config symbols. Link: http://lkml.kernel.org/r/1476616078-32252-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Garnier <thgarnie@google.com> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-28 08:46:38 +08:00
__cond_export_sym(sym, val, sec, __is_defined(__KSYM_##sym))
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#define __cond_export_sym(sym, val, sec, conf) \
___cond_export_sym(sym, val, sec, conf)
#define ___cond_export_sym(sym, val, sec, enabled) \
__cond_export_sym_##enabled(sym, val, sec)
#define __cond_export_sym_1(sym, val, sec) ___EXPORT_SYMBOL sym, val, sec
#define __cond_export_sym_0(sym, val, sec) /* nothing */
#else
#define __EXPORT_SYMBOL(sym, val, sec) ___EXPORT_SYMBOL sym, val, sec
#endif
#define EXPORT_SYMBOL(name) \
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
__EXPORT_SYMBOL(name, KSYM_FUNC(name),)
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#define EXPORT_SYMBOL_GPL(name) \
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
__EXPORT_SYMBOL(name, KSYM_FUNC(name), _gpl)
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#define EXPORT_DATA_SYMBOL(name) \
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
__EXPORT_SYMBOL(name, name,)
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#define EXPORT_DATA_SYMBOL_GPL(name) \
export.h: remove code for prefixing symbols with underscore CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the export.h headers. I am keeping VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() because they are widely used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-09 15:23:49 +08:00
__EXPORT_SYMBOL(name, name,_gpl)
EXPORT_SYMBOL() for asm Add asm-usable variants of EXPORT_SYMBOL/EXPORT_SYMBOL_GPL. This commit just adds the default implementation; most of the architectures can simply add export.h to asm/Kbuild and start using <asm/export.h> from assembler. The rest needs to have their <asm/export.h> define everal macros and then explicitly include <asm-generic/export.h> One area where the things might diverge from default is the alignment; normally it's 8 bytes on 64bit targets and 4 on 32bit ones, both for unsigned long and for struct kernel_symbol. Unfortunately, amd64 and m68k are unusual - m68k aligns to 2 bytes (for both) and amd64 aligns struct kernel_symbol to 16 bytes. For those we'll need asm/export.h to override the constants used by generic version - KSYM_ALIGN and KCRC_ALIGN for kernel_symbol and unsigned long resp. And no, __alignof__ would not do the trick - on amd64 __alignof__ of struct kernel_symbol is 8, not 16. More serious source of unpleasantness is treatment of function descriptors on architectures that have those. Things like ppc64, parisc, ia64, etc. need more than the address of the first insn to call an arbitrary function. As the result, their representation of pointers to functions is not the typical "address of the entry point" - it's an address of a small static structure containing all the required information (including the entry point, of course). Sadly, the asm-side conventions differ in what the function name refers to - entry point or the function descriptor. On ppc64 we do the latter; bar: .quad foo is what void (*bar)(void) = foo; turns into and the rare places where we need to explicitly work with the label of entry point are dealt with as DOTSYM(foo). For our purposes it's ideal - generic macros are usable. However, parisc would have foo and P%foo used for label of entry point and address of the function descriptor and bar: .long P%foo woudl be used instead. ia64 goes similar to parisc in that respect, except that there it's @fptr(foo) rather than P%foo. Such architectures need to define KSYM_FUNC that would turn a function name into whatever is needed to refer to function descriptor. What's more, on such architectures we need to know whether we are exporting a function or an object - in assembler we have to tell that explicitly, to decide whether we want EXPORT_SYMBOL(foo) produce e.g. __ksymtab_foo: .quad foo or __ksymtab_foo: .quad @fptr(foo) For that reason we introduce EXPORT_DATA_SYMBOL{,_GPL}(), to be used for exports of data objects. On normal architectures it's the same thing as EXPORT_SYMBOL{,_GPL}(), but on parisc-like ones they differ and the right one needs to be used. Most of the exports are functions, so we keep EXPORT_SYMBOL for those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-11 23:54:54 +08:00
#endif