UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/s390/kernel/compat_signal.c

547 lines
16 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20 17:15:04 +08:00
* Copyright IBM Corp. 2000, 2006
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
* Gerhard Tonn (ton@de.ibm.com)
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
*/
#include <linux/compat.h>
#include <linux/sched.h>
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-09 01:51:37 +08:00
#include <linux/sched/task_stack.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/tty.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <asm/ucontext.h>
Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25 03:46:01 +08:00
#include <linux/uaccess.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/lowcore.h>
Disintegrate asm/system.h for S390 Disintegrate asm/system.h for S390. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
2012-03-29 01:30:02 +08:00
#include <asm/switch_to.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "compat_linux.h"
#include "compat_ptrace.h"
[S390] Fix a lot of sparse warnings. Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:46:26 +08:00
#include "entry.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
typedef struct
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE32];
struct sigcontext32 sc;
_sigregs32 sregs;
int signo;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
_sigregs_ext32 sregs_ext;
__u16 svc_insn; /* Offset of svc_insn is NOT fixed! */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} sigframe32;
typedef struct
{
__u8 callee_used_stack[__SIGNAL_FRAMESIZE32];
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
__u16 svc_insn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
compat_siginfo_t info;
struct ucontext32 uc;
} rt_sigframe32;
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
static inline void sigset_to_sigset32(unsigned long *set64,
compat_sigset_word *set32)
{
set32[0] = (compat_sigset_word) set64[0];
set32[1] = (compat_sigset_word)(set64[0] >> 32);
}
static inline void sigset32_to_sigset(compat_sigset_word *set32,
unsigned long *set64)
{
set64[0] = (unsigned long) set32[0] | ((unsigned long) set32[1] << 32);
}
constify copy_siginfo_to_user{,32}() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-14 05:23:53 +08:00
int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int err;
/* If you change siginfo_t structure, please be sure
this code is fixed accordingly.
It should never copy any pad contained in the structure
to avoid security leaks, but must copy the generic
3 ints plus the relevant union member.
This routine must convert siginfo from 64bit to 32bit as well
at the same time. */
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
err |= __put_user(from->si_code, &to->si_code);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (from->si_code < 0)
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
switch (siginfo_layout(from->si_signo, from->si_code)) {
case SIL_RT:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __put_user(from->si_int, &to->si_int);
/* fallthrough */
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_KILL:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_CHLD:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
break;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_FAULT:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __put_user((unsigned long) from->si_addr,
&to->si_addr);
break;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_POLL:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_TIMER:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_int, &to->si_int);
break;
default:
break;
}
}
s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32() The return value of copy_siginfo_(to|from)_user32() gets passed to user space, however we do not convert a positive return value from copy_(to|from)_user to -EFAULT. Therefore these functions (and the calling system calls) my incorrectly return a positive number (bytes not copied) instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 18:09:37 +08:00
return err ? -EFAULT : 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
{
int err;
u32 tmp;
err = __get_user(to->si_signo, &from->si_signo);
err |= __get_user(to->si_errno, &from->si_errno);
err |= __get_user(to->si_code, &from->si_code);
if (to->si_code < 0)
err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
switch (siginfo_layout(to->si_signo, to->si_code)) {
case SIL_RT:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __get_user(to->si_int, &from->si_int);
/* fallthrough */
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_KILL:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __get_user(to->si_pid, &from->si_pid);
err |= __get_user(to->si_uid, &from->si_uid);
break;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_CHLD:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __get_user(to->si_pid, &from->si_pid);
err |= __get_user(to->si_uid, &from->si_uid);
err |= __get_user(to->si_utime, &from->si_utime);
err |= __get_user(to->si_stime, &from->si_stime);
err |= __get_user(to->si_status, &from->si_status);
break;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_FAULT:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __get_user(tmp, &from->si_addr);
[S390] sparse: fix sparse warnings with __user pointers Use __force to quiet sparse warnings about user address space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:17:15 +08:00
to->si_addr = (void __force __user *)
(u64) (tmp & PSW32_ADDR_INSN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_POLL:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __get_user(to->si_band, &from->si_band);
err |= __get_user(to->si_fd, &from->si_fd);
break;
signal: Remove kernel interal si_code magic struct siginfo is a union and the kernel since 2.4 has been hiding a union tag in the high 16bits of si_code using the values: __SI_KILL __SI_TIMER __SI_POLL __SI_FAULT __SI_CHLD __SI_RT __SI_MESGQ __SI_SYS While this looks plausible on the surface, in practice this situation has not worked well. - Injected positive signals are not copied to user space properly unless they have these magic high bits set. - Injected positive signals are not reported properly by signalfd unless they have these magic high bits set. - These kernel internal values leaked to userspace via ptrace_peek_siginfo - It was possible to inject these kernel internal values and cause the the kernel to misbehave. - Kernel developers got confused and expected these kernel internal values in userspace in kernel self tests. - Kernel developers got confused and set si_code to __SI_FAULT which is SI_USER in userspace which causes userspace to think an ordinary user sent the signal and that it was not kernel generated. - The values make it impossible to reorganize the code to transform siginfo_copy_to_user into a plain copy_to_user. As si_code must be massaged before being passed to userspace. So remove these kernel internal si codes and make the kernel code simpler and more maintainable. To replace these kernel internal magic si_codes introduce the helper function siginfo_layout, that takes a signal number and an si_code and computes which union member of siginfo is being used. Have siginfo_layout return an enumeration so that gcc will have enough information to warn if a switch statement does not handle all of union members. A couple of architectures have a messed up ABI that defines signal specific duplications of SI_USER which causes more special cases in siginfo_layout than I would like. The good news is only problem architectures pay the cost. Update all of the code that used the previous magic __SI_ values to use the new SIL_ values and to call siginfo_layout to get those values. Escept where not all of the cases are handled remove the defaults in the switch statements so that if a new case is missed in the future the lack will show up at compile time. Modify the code that copies siginfo si_code to userspace to just copy the value and not cast si_code to a short first. The high bits are no longer used to hold a magic union member. Fixup the siginfo header files to stop including the __SI_ values in their constants and for the headers that were missing it to properly update the number of si_codes for each signal type. The fixes to copy_siginfo_from_user32 implementations has the interesting property that several of them perviously should never have worked as the __SI_ values they depended up where kernel internal. With that dependency gone those implementations should work much better. The idea of not passing the __SI_ values out to userspace and then not reinserting them has been tested with criu and criu worked without changes. Ref: 2.4.0-test1 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-17 11:36:59 +08:00
case SIL_TIMER:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
err |= __get_user(to->si_tid, &from->si_tid);
err |= __get_user(to->si_overrun, &from->si_overrun);
err |= __get_user(to->si_int, &from->si_int);
break;
default:
break;
}
}
s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32() The return value of copy_siginfo_(to|from)_user32() gets passed to user space, however we do not convert a positive return value from copy_(to|from)_user to -EFAULT. Therefore these functions (and the calling system calls) my incorrectly return a positive number (bytes not copied) instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 18:09:37 +08:00
return err ? -EFAULT : 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Store registers needed to create the signal frame */
static void store_sigregs(void)
{
save_access_regs(current->thread.acrs);
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 22:43:06 +08:00
save_fpu_regs();
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
}
/* Load registers after signal return */
static void load_sigregs(void)
{
restore_access_regs(current->thread.acrs);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int save_sigregs32(struct pt_regs *regs, _sigregs32 __user *sregs)
{
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
_sigregs32 user_sregs;
int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: fix handling of runtime instrumentation psw bit Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-16 15:58:01 +08:00
user_sregs.regs.psw.mask = (__u32)(regs->psw.mask >> 32);
user_sregs.regs.psw.mask &= PSW32_MASK_USER | PSW32_MASK_RI;
s390/compat: make psw32_user_bits a constant value again Make psw32_user_bits a constant value again. This is a leftover of the code which allowed to run the kernel either in primary or home space which got removed with 9a905662 "s390/uaccess: always run the kernel in home space". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-16 20:17:29 +08:00
user_sregs.regs.psw.mask |= PSW32_USER_BITS;
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
user_sregs.regs.psw.addr = (__u32) regs->psw.addr |
[S390] allow all addressing modes The user space program can change its addressing mode between the 24-bit, 31-bit and the 64-bit mode if the kernel is 64 bit. Currently the kernel always forces the standard amode on signal delivery and signal return and on ptrace: 64-bit for a 64-bit process, 31-bit for a compat process and 31-bit kernels. Change the signal and ptrace code to allow the full range of addressing modes. Signal handlers are run in the standard addressing mode for the process. One caveat is that even an 31-bit compat process can switch to the 64-bit mode. The next signal will switch back into the 31-bit mode and there is no room in the 31-bit compat signal frame to store the information that the program came from the 64-bit mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:51 +08:00
(__u32)(regs->psw.mask & PSW_MASK_BA);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (i = 0; i < NUM_GPRS; i++)
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
user_sregs.regs.gprs[i] = (__u32) regs->gprs[i];
memcpy(&user_sregs.regs.acrs, current->thread.acrs,
sizeof(user_sregs.regs.acrs));
s390/kernel: introduce fpu-internal.h with fpu helper functions Introduce a new structure to manage FP and VX registers. Refactor the save and restore of floating point and vector registers with a set of helper functions in fpu-internal.h. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-11 21:33:54 +08:00
fpregs_store((_s390_fp_regs *) &user_sregs.fpregs, &current->thread.fpu);
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs32)))
s390/compat,signal: change return values to -EFAULT Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 19:34:28 +08:00
return -EFAULT;
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
{
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
_sigregs32 user_sregs;
int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Alwys make any pending restarted system call return -EINTR */
all arches, signal: move restart_block to struct task_struct If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: Richard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 07:01:14 +08:00
current->restart_block.fn = do_no_restart_syscall;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
if (__copy_from_user(&user_sregs, &sregs->regs, sizeof(user_sregs)))
s390/compat,signal: change return values to -EFAULT Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 19:34:28 +08:00
return -EFAULT;
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
s390: fix handling of runtime instrumentation psw bit Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-16 15:58:01 +08:00
if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW32_MASK_RI))
return -EINVAL;
s390/kernel: use test_fp_ctl() to verify the floating-point control word Use the test_fp_ctl() to test the floating-point control word for validity and use restore_fp_ctl() to set it in load_sigregs. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-28 17:30:40 +08:00
/* Test the floating-point-control word. */
if (test_fp_ctl(user_sregs.fpregs.fpc))
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
return -EINVAL;
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
s390/signal: always restore saved runtime instrumentation psw bit Commit "s390: fix handling of runtime instrumentation psw bit" (5ebf250dab) changed the behavior of setting the runtime instrumentation psw bit. This commit restores the original logic: 1. When returning from the signal handler, the runtime instrumentation psw bit is restored to its saved state. 2. If the runtime instrumentation psw bit is enabled during the signal handler, it is always turned off when leaving the signal handler. The saved state is restored as described in 1. That also implies that turning on runtime instrumentation in the signal handler is only effective while running in the signal context. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
2013-11-19 19:26:09 +08:00
regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
s390: fix handling of runtime instrumentation psw bit Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-16 15:58:01 +08:00
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
/* Check for invalid user address space control. */
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-24 15:14:56 +08:00
if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
regs->psw.mask = PSW_ASC_PRIMARY |
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
(regs->psw.mask & ~PSW_MASK_ASC);
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
regs->psw.addr = (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_INSN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (i = 0; i < NUM_GPRS; i++)
s390: fix save and restore of the floating-point-control register The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15 22:08:34 +08:00
regs->gprs[i] = (__u64) user_sregs.regs.gprs[i];
memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
sizeof(current->thread.acrs));
s390/kernel: introduce fpu-internal.h with fpu helper functions Introduce a new structure to manage FP and VX registers. Refactor the save and restore of floating point and vector registers with a set of helper functions in fpu-internal.h. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-11 21:33:54 +08:00
fpregs_load((_s390_fp_regs *) &user_sregs.fpregs, &current->thread.fpu);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 18:55:07 +08:00
clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
static int save_sigregs_ext32(struct pt_regs *regs,
_sigregs_ext32 __user *sregs_ext)
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
{
__u32 gprs_high[NUM_GPRS];
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
__u64 vxrs[__NUM_VXRS_LOW];
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
int i;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Save high gprs to signal stack */
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
for (i = 0; i < NUM_GPRS; i++)
gprs_high[i] = regs->gprs[i] >> 32;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (__copy_to_user(&sregs_ext->gprs_high, &gprs_high,
sizeof(sregs_ext->gprs_high)))
s390/compat,signal: change return values to -EFAULT Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 19:34:28 +08:00
return -EFAULT;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Save vector registers to signal stack */
s390/fpu: always enable the vector facility if it is available If the kernel detects that the s390 hardware supports the vector facility, it is enabled by default at an early stage. To force it off, use the novx kernel parameter. Note that there is a small time window, where the vector facility is enabled before it is forced to be off. With enabling the vector facility by default, the FPU save and restore functions can be improved. They do not longer require to manage expensive control register updates to enable or disable the vector enablement control for particular processes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-29 16:04:41 +08:00
if (MACHINE_HAS_VX) {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
for (i = 0; i < __NUM_VXRS_LOW; i++)
s390/kernel: introduce fpu-internal.h with fpu helper functions Introduce a new structure to manage FP and VX registers. Refactor the save and restore of floating point and vector registers with a set of helper functions in fpu-internal.h. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-11 21:33:54 +08:00
vxrs[i] = *((__u64 *)(current->thread.fpu.vxrs + i) + 1);
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (__copy_to_user(&sregs_ext->vxrs_low, vxrs,
sizeof(sregs_ext->vxrs_low)) ||
__copy_to_user(&sregs_ext->vxrs_high,
s390/kernel: introduce fpu-internal.h with fpu helper functions Introduce a new structure to manage FP and VX registers. Refactor the save and restore of floating point and vector registers with a set of helper functions in fpu-internal.h. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-11 21:33:54 +08:00
current->thread.fpu.vxrs + __NUM_VXRS_LOW,
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
}
s390/compat,signal: change return values to -EFAULT Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 19:34:28 +08:00
return 0;
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
}
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
static int restore_sigregs_ext32(struct pt_regs *regs,
_sigregs_ext32 __user *sregs_ext)
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
{
__u32 gprs_high[NUM_GPRS];
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
__u64 vxrs[__NUM_VXRS_LOW];
s390/compat,signal: change return values to -EFAULT Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 19:34:28 +08:00
int i;
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Restore high gprs from signal stack */
if (__copy_from_user(&gprs_high, &sregs_ext->gprs_high,
s390/compat: correct restore of high gprs on signal return git commit 8070361799ae1e3f4ef347bd10f0a508ac10acfb "s390: add support for vector extension" broke 31-bit compat processes in regard to signal handling. The restore_sigregs_ext32() function is used to restore the additional elements from the user space signal frame. Among the additional elements are the upper registers halves for 64-bit register support for 31-bit processes. The copy_from_user that is used to retrieve the high-gprs array from the user stack uses an incorrect length, 8 bytes instead of 64 bytes. This causes incorrect upper register halves to get loaded. Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-19 21:44:14 +08:00
sizeof(sregs_ext->gprs_high)))
s390/compat,signal: change return values to -EFAULT Instead of returnin the number of bytes not copied and/or -EFAULT let the signal handler helper functions always return -EFAULT if a user space access failed. This doesn't fix a bug in the current code, but makes is harder to get it wrong in the future. Also "smatch" won't complain anymore about the fact that the number of remaining bytes gets returned instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-14 19:34:28 +08:00
return -EFAULT;
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
for (i = 0; i < NUM_GPRS; i++)
*(__u32 *)&regs->gprs[i] = gprs_high[i];
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Restore vector registers from signal stack */
s390/fpu: always enable the vector facility if it is available If the kernel detects that the s390 hardware supports the vector facility, it is enabled by default at an early stage. To force it off, use the novx kernel parameter. Note that there is a small time window, where the vector facility is enabled before it is forced to be off. With enabling the vector facility by default, the FPU save and restore functions can be improved. They do not longer require to manage expensive control register updates to enable or disable the vector enablement control for particular processes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-29 16:04:41 +08:00
if (MACHINE_HAS_VX) {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (__copy_from_user(vxrs, &sregs_ext->vxrs_low,
sizeof(sregs_ext->vxrs_low)) ||
s390/kernel: introduce fpu-internal.h with fpu helper functions Introduce a new structure to manage FP and VX registers. Refactor the save and restore of floating point and vector registers with a set of helper functions in fpu-internal.h. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-11 21:33:54 +08:00
__copy_from_user(current->thread.fpu.vxrs + __NUM_VXRS_LOW,
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
&sregs_ext->vxrs_high,
sizeof(sregs_ext->vxrs_high)))
return -EFAULT;
for (i = 0; i < __NUM_VXRS_LOW; i++)
s390/kernel: introduce fpu-internal.h with fpu helper functions Introduce a new structure to manage FP and VX registers. Refactor the save and restore of floating point and vector registers with a set of helper functions in fpu-internal.h. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-11 21:33:54 +08:00
*((__u64 *)(current->thread.fpu.vxrs + i) + 1) = vxrs[i];
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
}
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
return 0;
}
s390/compat: get rid of compat wrapper assembly code Now that all compat syscalls have been converted to use the COMPAT_SYSCALL_DEFINE macros, we don't need to compat syscall wrapper assembly code anymore. So remove it and fix up the system call table accordingly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-03-05 17:05:56 +08:00
COMPAT_SYSCALL_DEFINE0(sigreturn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[S390] System call cleanup. Remove system call glue for sys_clone, sys_fork, sys_vfork, sys_execve, sys_sigreturn, sys_rt_sigreturn and sys_sigaltstack. Call do_execve from kernel_execve directly, move pt_regs to the right place and branch to sysc_return to start the user space program. This removes the last in-kernel system call. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27 22:01:40 +08:00
struct pt_regs *regs = task_pt_regs(current);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sigframe32 __user *frame = (sigframe32 __user *)regs->gprs[15];
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
compat_sigset_t cset;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sigset_t set;
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
if (__copy_from_user(&cset.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE32))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto badframe;
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
sigset32_to_sigset(cset.sig, set.sig);
[S390] signal: convert to use set_current_blocked() Convert to use set_current_blocked() like x86. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 22:44:26 +08:00
set_current_blocked(&set);
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 22:43:06 +08:00
save_fpu_regs();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (restore_sigregs32(regs, &frame->sregs))
goto badframe;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (restore_sigregs_ext32(regs, &frame->sregs_ext))
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
goto badframe;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
load_sigregs();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return regs->gprs[2];
badframe:
force_sig(SIGSEGV, current);
return 0;
}
s390/compat: get rid of compat wrapper assembly code Now that all compat syscalls have been converted to use the COMPAT_SYSCALL_DEFINE macros, we don't need to compat syscall wrapper assembly code anymore. So remove it and fix up the system call table accordingly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-03-05 17:05:56 +08:00
COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[S390] System call cleanup. Remove system call glue for sys_clone, sys_fork, sys_vfork, sys_execve, sys_sigreturn, sys_rt_sigreturn and sys_sigaltstack. Call do_execve from kernel_execve directly, move pt_regs to the right place and branch to sysc_return to start the user space program. This removes the last in-kernel system call. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27 22:01:40 +08:00
struct pt_regs *regs = task_pt_regs(current);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rt_sigframe32 __user *frame = (rt_sigframe32 __user *)regs->gprs[15];
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
compat_sigset_t cset;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sigset_t set;
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
if (__copy_from_user(&cset, &frame->uc.uc_sigmask, sizeof(cset)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto badframe;
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
sigset32_to_sigset(cset.sig, set.sig);
[S390] signal: convert to use set_current_blocked() Convert to use set_current_blocked() like x86. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 22:44:26 +08:00
set_current_blocked(&set);
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (compat_restore_altstack(&frame->uc.uc_stack))
goto badframe;
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 22:43:06 +08:00
save_fpu_regs();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (restore_sigregs32(regs, &frame->uc.uc_mcontext))
goto badframe;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (restore_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext))
[S390] 64-bit register support for 31-bit processes From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:13 +08:00
goto badframe;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
load_sigregs();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return regs->gprs[2];
badframe:
[S390] System call cleanup. Remove system call glue for sys_clone, sys_fork, sys_vfork, sys_execve, sys_sigreturn, sys_rt_sigreturn and sys_sigaltstack. Call do_execve from kernel_execve directly, move pt_regs to the right place and branch to sysc_return to start the user space program. This removes the last in-kernel system call. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27 22:01:40 +08:00
force_sig(SIGSEGV, current);
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Set up a signal frame.
*/
/*
* Determine which stack to use..
*/
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
{
unsigned long sp;
/* Default to using normal stack */
sp = (unsigned long) A(regs->gprs[15]);
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
/* Overflow on alternate signal stack gives SIGSEGV. */
if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
return (void __user *) -1UL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
[PATCH] s390: alternate signal stack handling bug If a signal handler has been established with the SA_ONSTACK option but no alternate stack is provided with sigaltstack(), the kernel still tries to install the alternate stack. Also when setting an alternate stack with sigalstack() and the SS_DISABLE flag, the kernel tries to install the alternate stack on signal delivery. Use the correct conditions sas_ss_flags() to check if the alternate stack has to be used. Signed-off-by: Laurent Meyer <meyerlau@fr.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28 09:40:07 +08:00
if (! sas_ss_flags(sp))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sp = current->sas_ss_sp + current->sas_ss_size;
}
return (void __user *)((sp - frame_size) & -8ul);
}
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
static int setup_frame32(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
int sig = ksig->sig;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
sigframe32 __user *frame;
struct sigcontext32 sc;
unsigned long restorer;
size_t frame_size;
/*
* gprs_high are always present for 31-bit compat tasks.
* The space for vector registers is only allocated if
* the machine supports it
*/
frame_size = sizeof(*frame) - sizeof(frame->sregs_ext.__reserved);
if (!MACHINE_HAS_VX)
frame_size -= sizeof(frame->sregs_ext.vxrs_low) +
sizeof(frame->sregs_ext.vxrs_high);
frame = get_sigframe(&ksig->ka, regs, frame_size);
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
if (frame == (void __user *) -1UL)
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Set up backchain. */
if (__put_user(regs->gprs[15], (unsigned int __user *) frame))
return -EFAULT;
/* Create struct sigcontext32 on the signal stack */
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
sigset_to_sigset32(set->sig, sc.oldmask);
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
sc.sregs = (__u32)(unsigned long __force) &frame->sregs;
if (__copy_to_user(&frame->sc, &sc, sizeof(frame->sc)))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create _sigregs32 on the signal stack */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (save_sigregs32(regs, &frame->sregs))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Place signal number on stack to allow backtrace from handler. */
if (__put_user(regs->gprs[2], (int __force __user *) &frame->signo))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Create _sigregs_ext32 on the signal stack */
if (save_sigregs_ext32(regs, &frame->sregs_ext))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Signal frames without vectors registers are short ! */
s390/signal: add sparse annotations Fix the following warnings from the sparse code checker: arch/s390/kernel/signal.c:374:38: warning: cast removes address space of expression arch/s390/kernel/signal.c:374:65: warning: incorrect type in initializer (different address spaces) arch/s390/kernel/signal.c:374:65: expected unsigned short [noderef] [usertype] <asn:1>*svc arch/s390/kernel/signal.c:374:65: got void * arch/s390/kernel/compat_signal.c:437:38: warning: cast removes address space of expression arch/s390/kernel/compat_signal.c:437:65: warning: incorrect type in initializer (different address spaces) arch/s390/kernel/compat_signal.c:437:65: expected unsigned short [noderef] [usertype] <asn:1>*svc arch/s390/kernel/compat_signal.c:437:65: got void * Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-30 20:45:43 +08:00
__u16 __user *svc = (void __user *) frame + frame_size - 2;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* Set up registers for signal handler */
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
regs->gprs[14] = restorer;
[S390] sparse: fix sparse warnings with __user pointers Use __force to quiet sparse warnings about user address space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:17:15 +08:00
regs->gprs[15] = (__force __u64) frame;
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
/* Force 31 bit amode and default user address space control. */
regs->psw.mask = PSW_MASK_BA |
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-24 15:14:56 +08:00
(PSW_USER_BITS & PSW_MASK_ASC) |
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
(regs->psw.mask & ~PSW_MASK_ASC);
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
regs->psw.addr = (__force __u64) ksig->ka.sa.sa_handler;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: Remove signal translation and exec_domain As execution domain support is gone we can remove signal translation from the signal code and remove exec_domain from thread_info. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-09-10 05:50:11 +08:00
regs->gprs[2] = sig;
[S390] sparse: fix sparse warnings with __user pointers Use __force to quiet sparse warnings about user address space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:17:15 +08:00
regs->gprs[3] = (__force __u64) &frame->sc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* We forgot to include these in the sigcontext.
To avoid breaking binary compatibility, they are passed as args. */
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 18:27:18 +08:00
if (sig == SIGSEGV || sig == SIGBUS || sig == SIGILL ||
sig == SIGTRAP || sig == SIGFPE) {
/* set extra registers only for synchronous signals */
regs->gprs[4] = regs->int_code & 127;
regs->gprs[5] = regs->int_parm_long;
s390: move sys_call_table and last_break from thread_info to thread_struct Move the last two architecture specific fields from the thread_info structure to the thread_struct. All that is left in thread_info is the flags field. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-08 19:33:38 +08:00
regs->gprs[6] = current->thread.last_break;
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 18:27:18 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
static int setup_rt_frame32(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
compat_sigset_t cset;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
rt_sigframe32 __user *frame;
unsigned long restorer;
size_t frame_size;
u32 uc_flags;
frame_size = sizeof(*frame) -
sizeof(frame->uc.uc_mcontext_ext.__reserved);
/*
* gprs_high are always present for 31-bit compat tasks.
* The space for vector registers is only allocated if
* the machine supports it
*/
uc_flags = UC_GPRS_HIGH;
if (MACHINE_HAS_VX) {
s390/fpu: always enable the vector facility if it is available If the kernel detects that the s390 hardware supports the vector facility, it is enabled by default at an early stage. To force it off, use the novx kernel parameter. Note that there is a small time window, where the vector facility is enabled before it is forced to be off. With enabling the vector facility by default, the FPU save and restore functions can be improved. They do not longer require to manage expensive control register updates to enable or disable the vector enablement control for particular processes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-29 16:04:41 +08:00
uc_flags |= UC_VXRS;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
} else
frame_size -= sizeof(frame->uc.uc_mcontext_ext.vxrs_low) +
sizeof(frame->uc.uc_mcontext_ext.vxrs_high);
frame = get_sigframe(&ksig->ka, regs, frame_size);
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
if (frame == (void __user *) -1UL)
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
[S390] Protect against sigaltstack wraparound. This is just a port of 83bd01024b1fdfc41d9b758e5669e80fca72df66 "x86: protect against sigaltstack wraparound". Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:45:57 +08:00
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Set up backchain. */
if (__put_user(regs->gprs[15], (unsigned int __force __user *) frame))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
__u16 __user *svc = &frame->svc_insn;
if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
/* Create siginfo on the signal stack */
if (copy_siginfo_to_user32(&frame->info, &ksig->info))
return -EFAULT;
/* Store registers needed to create the signal frame */
store_sigregs();
/* Create ucontext on the signal stack. */
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
sigset_to_sigset32(set->sig, cset.sig);
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
if (__put_user(uc_flags, &frame->uc.uc_flags) ||
__put_user(0, &frame->uc.uc_link) ||
__compat_save_altstack(&frame->uc.uc_stack, regs->gprs[15]) ||
save_sigregs32(regs, &frame->uc.uc_mcontext) ||
s390/compat: correct uc_sigmask of the compat signal frame The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-08 21:25:39 +08:00
__copy_to_user(&frame->uc.uc_sigmask, &cset, sizeof(cset)) ||
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
save_sigregs_ext32(regs, &frame->uc.uc_mcontext_ext))
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
return -EFAULT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up registers for signal handler */
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
regs->gprs[14] = restorer;
[S390] sparse: fix sparse warnings with __user pointers Use __force to quiet sparse warnings about user address space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:17:15 +08:00
regs->gprs[15] = (__force __u64) frame;
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
/* Force 31 bit amode and default user address space control. */
regs->psw.mask = PSW_MASK_BA |
s390/uaccess: always run the kernel in home space Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-24 15:14:56 +08:00
(PSW_USER_BITS & PSW_MASK_ASC) |
s390/signal: set correct address space control If user space is running in primary mode it can switch to secondary or access register mode, this is used e.g. in the clock_gettime code of the vdso. If a signal is delivered to the user space process while it has been running in access register mode the signal handler is executed in access register mode as well which will result in a crash most of the time. Set the address space control bits in the PSW to the default for the execution of the signal handler and make sure that the previous address space control is restored on signal return. Take care that user space can not switch to the kernel address space by modifying the registers in the signal frame. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 17:44:08 +08:00
(regs->psw.mask & ~PSW_MASK_ASC);
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
regs->psw.addr = (__u64 __force) ksig->ka.sa.sa_handler;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s390: Remove signal translation and exec_domain As execution domain support is gone we can remove signal translation from the signal code and remove exec_domain from thread_info. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-09-10 05:50:11 +08:00
regs->gprs[2] = ksig->sig;
[S390] sparse: fix sparse warnings with __user pointers Use __force to quiet sparse warnings about user address space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:17:15 +08:00
regs->gprs[3] = (__force __u64) &frame->info;
regs->gprs[4] = (__force __u64) &frame->uc;
s390: move sys_call_table and last_break from thread_info to thread_struct Move the last two architecture specific fields from the thread_info structure to the thread_struct. All that is left in thread_info is the flags field. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-08 19:33:38 +08:00
regs->gprs[5] = current->thread.last_break;
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* OK, we're invoking a handler
*/
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
void handle_signal32(struct ksignal *ksig, sigset_t *oldset,
struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[PATCH] s390: Add support for new syscalls/TIF_RESTORE_SIGMASK Add support for the new *at, pselect6 and ppoll system calls. This includes adding required support for TIF_RESTORE_SIGMASK. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 19:06:38 +08:00
int ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set up the stack frame */
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
if (ksig->ka.sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame32(ksig, oldset, regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else
s390: Use get_signal() signal_setup_done() Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-14 04:21:03 +08:00
ret = setup_frame32(ksig, oldset, regs);
signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLE_STEP));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}