OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_dp.c

5370 lines
150 KiB
C
Raw Normal View History

/*
* Copyright © 2008 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Keith Packard <keithp@keithp.com>
*
*/
#include <linux/i2c.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_edid.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include "i915_drv.h"
#define DP_LINK_CHECK_TIMEOUT (10 * 1000)
struct dp_link_dpll {
int link_bw;
struct dpll dpll;
};
static const struct dp_link_dpll gen4_dpll[] = {
{ DP_LINK_BW_1_62,
{ .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } },
{ DP_LINK_BW_2_7,
{ .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } }
};
static const struct dp_link_dpll pch_dpll[] = {
{ DP_LINK_BW_1_62,
{ .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } },
{ DP_LINK_BW_2_7,
{ .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } }
};
static const struct dp_link_dpll vlv_dpll[] = {
{ DP_LINK_BW_1_62,
{ .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } },
{ DP_LINK_BW_2_7,
{ .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } }
};
/*
* CHV supports eDP 1.4 that have more link rates.
* Below only provides the fixed rate but exclude variable rate.
*/
static const struct dp_link_dpll chv_dpll[] = {
/*
* CHV requires to program fractional division for m2.
* m2 is stored in fixed point format using formula below
* (m2_int << 22) | m2_fraction
*/
{ DP_LINK_BW_1_62, /* m2_int = 32, m2_fraction = 1677722 */
{ .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } },
{ DP_LINK_BW_2_7, /* m2_int = 27, m2_fraction = 0 */
{ .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
{ DP_LINK_BW_5_4, /* m2_int = 27, m2_fraction = 0 */
{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
};
/**
* is_edp - is the given port attached to an eDP panel (either CPU or PCH)
* @intel_dp: DP struct
*
* If a CPU or PCH DP output is attached to an eDP panel, this function
* will return true, and false otherwise.
*/
static bool is_edp(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
return intel_dig_port->base.type == INTEL_OUTPUT_EDP;
}
static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
return intel_dig_port->base.base.dev;
}
static struct intel_dp *intel_attached_dp(struct drm_connector *connector)
{
return enc_to_intel_dp(&intel_attached_encoder(connector)->base);
}
static void intel_dp_link_down(struct intel_dp *intel_dp);
static bool edp_panel_vdd_on(struct intel_dp *intel_dp);
static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp);
static void vlv_steal_power_sequencer(struct drm_device *dev,
enum pipe pipe);
2014-05-02 12:02:48 +08:00
int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{
int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
struct drm_device *dev = intel_dp->attached_connector->base.dev;
switch (max_link_bw) {
case DP_LINK_BW_1_62:
case DP_LINK_BW_2_7:
break;
case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */
if (((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) ||
INTEL_INFO(dev)->gen >= 8) &&
intel_dp->dpcd[DP_DPCD_REV] >= 0x12)
max_link_bw = DP_LINK_BW_5_4;
else
max_link_bw = DP_LINK_BW_2_7;
break;
default:
WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n",
max_link_bw);
max_link_bw = DP_LINK_BW_1_62;
break;
}
return max_link_bw;
}
static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
u8 source_max, sink_max;
source_max = 4;
if (HAS_DDI(dev) && intel_dig_port->port == PORT_A &&
(intel_dig_port->saved_port_bits & DDI_A_4_LANES) == 0)
source_max = 2;
sink_max = drm_dp_max_lane_count(intel_dp->dpcd);
return min(source_max, sink_max);
}
/*
* The units on the numbers in the next two are... bizarre. Examples will
* make it clearer; this one parallels an example in the eDP spec.
*
* intel_dp_max_data_rate for one lane of 2.7GHz evaluates as:
*
* 270000 * 1 * 8 / 10 == 216000
*
* The actual data capacity of that configuration is 2.16Gbit/s, so the
* units are decakilobits. ->clock in a drm_display_mode is in kilohertz -
* or equivalently, kilopixels per second - so for 1680x1050R it'd be
* 119000. At 18bpp that's 2142000 kilobits per second.
*
* Thus the strange-looking division by 10 in intel_dp_link_required, to
* get the result in decakilobits instead of kilobits.
*/
static int
intel_dp_link_required(int pixel_clock, int bpp)
{
return (pixel_clock * bpp + 9) / 10;
}
static int
intel_dp_max_data_rate(int max_link_clock, int max_lanes)
{
return (max_link_clock * max_lanes * 8) / 10;
}
static enum drm_mode_status
intel_dp_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
int target_clock = mode->clock;
int max_rate, mode_rate, max_lanes, max_link_clock;
if (is_edp(intel_dp) && fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
return MODE_PANEL;
if (mode->vdisplay > fixed_mode->vdisplay)
return MODE_PANEL;
target_clock = fixed_mode->clock;
}
max_link_clock = drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
max_lanes = intel_dp_max_lane_count(intel_dp);
max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
mode_rate = intel_dp_link_required(target_clock, 18);
if (mode_rate > max_rate)
return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
return MODE_CLOCK_LOW;
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
return MODE_H_ILLEGAL;
return MODE_OK;
}
uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes)
{
int i;
uint32_t v = 0;
if (src_bytes > 4)
src_bytes = 4;
for (i = 0; i < src_bytes; i++)
v |= ((uint32_t) src[i]) << ((3-i) * 8);
return v;
}
void intel_dp_unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
{
int i;
if (dst_bytes > 4)
dst_bytes = 4;
for (i = 0; i < dst_bytes; i++)
dst[i] = src >> ((3-i) * 8);
}
/* hrawclock is 1/4 the FSB frequency */
static int
intel_hrawclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t clkcfg;
/* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
if (IS_VALLEYVIEW(dev))
return 200;
clkcfg = I915_READ(CLKCFG);
switch (clkcfg & CLKCFG_FSB_MASK) {
case CLKCFG_FSB_400:
return 100;
case CLKCFG_FSB_533:
return 133;
case CLKCFG_FSB_667:
return 166;
case CLKCFG_FSB_800:
return 200;
case CLKCFG_FSB_1067:
return 266;
case CLKCFG_FSB_1333:
return 333;
/* these two are just a guess; one of them might be right */
case CLKCFG_FSB_1600:
case CLKCFG_FSB_1600_ALT:
return 400;
default:
return 133;
}
}
static void
intel_dp_init_panel_power_sequencer(struct drm_device *dev,
struct intel_dp *intel_dp);
static void
intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
struct intel_dp *intel_dp);
static void pps_lock(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *encoder = &intel_dig_port->base;
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
/*
* See vlv_power_sequencer_reset() why we need
* a power domain reference here.
*/
power_domain = intel_display_port_power_domain(encoder);
intel_display_power_get(dev_priv, power_domain);
mutex_lock(&dev_priv->pps_mutex);
}
static void pps_unlock(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *encoder = &intel_dig_port->base;
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
mutex_unlock(&dev_priv->pps_mutex);
power_domain = intel_display_port_power_domain(encoder);
intel_display_power_put(dev_priv, power_domain);
}
static void
vlv_power_sequencer_kick(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = intel_dp->pps_pipe;
bool pll_enabled;
uint32_t DP;
if (WARN(I915_READ(intel_dp->output_reg) & DP_PORT_EN,
"skipping pipe %c power seqeuncer kick due to port %c being active\n",
pipe_name(pipe), port_name(intel_dig_port->port)))
return;
DRM_DEBUG_KMS("kicking pipe %c power sequencer for port %c\n",
pipe_name(pipe), port_name(intel_dig_port->port));
/* Preserve the BIOS-computed detected bit. This is
* supposed to be read-only.
*/
DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
DP |= DP_PORT_WIDTH(1);
DP |= DP_LINK_TRAIN_PAT_1;
if (IS_CHERRYVIEW(dev))
DP |= DP_PIPE_SELECT_CHV(pipe);
else if (pipe == PIPE_B)
DP |= DP_PIPEB_SELECT;
pll_enabled = I915_READ(DPLL(pipe)) & DPLL_VCO_ENABLE;
/*
* The DPLL for the pipe must be enabled for this to work.
* So enable temporarily it if it's not already enabled.
*/
if (!pll_enabled)
vlv_force_pll_on(dev, pipe, IS_CHERRYVIEW(dev) ?
&chv_dpll[0].dpll : &vlv_dpll[0].dpll);
/*
* Similar magic as in intel_dp_enable_port().
* We _must_ do this port enable + disable trick
* to make this power seqeuencer lock onto the port.
* Otherwise even VDD force bit won't work.
*/
I915_WRITE(intel_dp->output_reg, DP);
POSTING_READ(intel_dp->output_reg);
I915_WRITE(intel_dp->output_reg, DP | DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
if (!pll_enabled)
vlv_force_pll_off(dev, pipe);
}
static enum pipe
vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *encoder;
unsigned int pipes = (1 << PIPE_A) | (1 << PIPE_B);
enum pipe pipe;
lockdep_assert_held(&dev_priv->pps_mutex);
/* We should never land here with regular DP ports */
WARN_ON(!is_edp(intel_dp));
if (intel_dp->pps_pipe != INVALID_PIPE)
return intel_dp->pps_pipe;
/*
* We don't have power sequencer currently.
* Pick one that's not used by other ports.
*/
list_for_each_entry(encoder, &dev->mode_config.encoder_list,
base.head) {
struct intel_dp *tmp;
if (encoder->type != INTEL_OUTPUT_EDP)
continue;
tmp = enc_to_intel_dp(&encoder->base);
if (tmp->pps_pipe != INVALID_PIPE)
pipes &= ~(1 << tmp->pps_pipe);
}
/*
* Didn't find one. This should not happen since there
* are two power sequencers and up to two eDP ports.
*/
if (WARN_ON(pipes == 0))
pipe = PIPE_A;
else
pipe = ffs(pipes) - 1;
vlv_steal_power_sequencer(dev, pipe);
intel_dp->pps_pipe = pipe;
DRM_DEBUG_KMS("picked pipe %c power sequencer for port %c\n",
pipe_name(intel_dp->pps_pipe),
port_name(intel_dig_port->port));
/* init power sequencer on this pipe and port */
intel_dp_init_panel_power_sequencer(dev, intel_dp);
intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
/*
* Even vdd force doesn't work until we've made
* the power sequencer lock in on the port.
*/
vlv_power_sequencer_kick(intel_dp);
return intel_dp->pps_pipe;
}
typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv,
enum pipe pipe);
static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
return I915_READ(VLV_PIPE_PP_STATUS(pipe)) & PP_ON;
}
static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
return I915_READ(VLV_PIPE_PP_CONTROL(pipe)) & EDP_FORCE_VDD;
}
static bool vlv_pipe_any(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
return true;
}
static enum pipe
vlv_initial_pps_pipe(struct drm_i915_private *dev_priv,
enum port port,
vlv_pipe_check pipe_check)
{
enum pipe pipe;
for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) &
PANEL_PORT_SELECT_MASK;
if (port_sel != PANEL_PORT_SELECT_VLV(port))
continue;
if (!pipe_check(dev_priv, pipe))
continue;
return pipe;
}
return INVALID_PIPE;
}
static void
vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_dig_port->port;
lockdep_assert_held(&dev_priv->pps_mutex);
/* try to find a pipe with this port selected */
/* first pick one where the panel is on */
intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
vlv_pipe_has_pp_on);
/* didn't find one? pick one where vdd is on */
if (intel_dp->pps_pipe == INVALID_PIPE)
intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
vlv_pipe_has_vdd_on);
/* didn't find one? pick one with just the correct port */
if (intel_dp->pps_pipe == INVALID_PIPE)
intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
vlv_pipe_any);
/* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */
if (intel_dp->pps_pipe == INVALID_PIPE) {
DRM_DEBUG_KMS("no initial power sequencer for port %c\n",
port_name(port));
return;
}
DRM_DEBUG_KMS("initial power sequencer for port %c: pipe %c\n",
port_name(port), pipe_name(intel_dp->pps_pipe));
intel_dp_init_panel_power_sequencer(dev, intel_dp);
intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
}
void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
struct intel_encoder *encoder;
if (WARN_ON(!IS_VALLEYVIEW(dev)))
return;
/*
* We can't grab pps_mutex here due to deadlock with power_domain
* mutex when power_domain functions are called while holding pps_mutex.
* That also means that in order to use pps_pipe the code needs to
* hold both a power domain reference and pps_mutex, and the power domain
* reference get/put must be done while _not_ holding pps_mutex.
* pps_{lock,unlock}() do these steps in the correct order, so one
* should use them always.
*/
list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
struct intel_dp *intel_dp;
if (encoder->type != INTEL_OUTPUT_EDP)
continue;
intel_dp = enc_to_intel_dp(&encoder->base);
intel_dp->pps_pipe = INVALID_PIPE;
}
}
static u32 _pp_ctrl_reg(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (HAS_PCH_SPLIT(dev))
return PCH_PP_CONTROL;
else
return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp));
}
static u32 _pp_stat_reg(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (HAS_PCH_SPLIT(dev))
return PCH_PP_STATUS;
else
return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp));
}
/* Reboot notifier handler to shutdown panel power to guarantee T12 timing
This function only applicable when panel PM state is not to be tracked */
static int edp_notify_handler(struct notifier_block *this, unsigned long code,
void *unused)
{
struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp),
edp_notifier);
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_div;
u32 pp_ctrl_reg, pp_div_reg;
if (!is_edp(intel_dp) || code != SYS_RESTART)
return 0;
pps_lock(intel_dp);
if (IS_VALLEYVIEW(dev)) {
enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
pp_div = I915_READ(pp_div_reg);
pp_div &= PP_REFERENCE_DIVIDER_MASK;
/* 0x1F write to PP_DIV_REG sets max cycle delay */
I915_WRITE(pp_div_reg, pp_div | 0x1F);
I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF);
msleep(intel_dp->panel_power_cycle_delay);
}
pps_unlock(intel_dp);
return 0;
}
static bool edp_have_panel_power(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
lockdep_assert_held(&dev_priv->pps_mutex);
if (IS_VALLEYVIEW(dev) &&
intel_dp->pps_pipe == INVALID_PIPE)
return false;
return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0;
}
static bool edp_have_panel_vdd(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
lockdep_assert_held(&dev_priv->pps_mutex);
if (IS_VALLEYVIEW(dev) &&
intel_dp->pps_pipe == INVALID_PIPE)
return false;
return I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD;
}
static void
intel_dp_check_edp(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
if (!is_edp(intel_dp))
return;
if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) {
WARN(1, "eDP powered off while attempting aux channel communication.\n");
DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
I915_READ(_pp_stat_reg(intel_dp)),
I915_READ(_pp_ctrl_reg(intel_dp)));
}
}
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
static uint32_t
intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
uint32_t status;
bool done;
#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
if (has_aux_irq)
done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
msecs_to_jiffies_timeout(10));
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
else
done = wait_for_atomic(C, 10) == 0;
if (!done)
DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
has_aux_irq);
#undef C
return status;
}
static uint32_t i9xx_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
/*
* The clock divider is based off the hrawclk, and would like to run at
* 2MHz. So, take the hrawclk value and divide by 2 and use that
*/
return index ? 0 : intel_hrawclk(dev) / 2;
}
static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
if (index)
return 0;
if (intel_dig_port->port == PORT_A) {
if (IS_GEN6(dev) || IS_GEN7(dev))
return 200; /* SNB & IVB eDP input clock at 400Mhz */
else
return 225; /* eDP input clock at 450Mhz */
} else {
return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
}
}
static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (intel_dig_port->port == PORT_A) {
if (index)
return 0;
return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv), 2000);
} else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
/* Workaround for non-ULT HSW */
switch (index) {
case 0: return 63;
case 1: return 72;
default: return 0;
}
} else {
return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
}
}
static uint32_t vlv_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
{
return index ? 0 : 100;
}
static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
{
/*
* SKL doesn't need us to program the AUX clock divider (Hardware will
* derive the clock from CDCLK automatically). We still implement the
* get_aux_clock_divider vfunc to plug-in into the existing code.
*/
return index ? 0 : 1;
}
static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp,
bool has_aux_irq,
int send_bytes,
uint32_t aux_clock_divider)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
uint32_t precharge, timeout;
if (IS_GEN6(dev))
precharge = 3;
else
precharge = 5;
if (IS_BROADWELL(dev) && intel_dp->aux_ch_ctl_reg == DPA_AUX_CH_CTL)
timeout = DP_AUX_CH_CTL_TIME_OUT_600us;
else
timeout = DP_AUX_CH_CTL_TIME_OUT_400us;
return DP_AUX_CH_CTL_SEND_BUSY |
DP_AUX_CH_CTL_DONE |
(has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
timeout |
DP_AUX_CH_CTL_RECEIVE_ERROR |
(send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
(precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
(aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT);
}
static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
bool has_aux_irq,
int send_bytes,
uint32_t unused)
{
return DP_AUX_CH_CTL_SEND_BUSY |
DP_AUX_CH_CTL_DONE |
(has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_TIME_OUT_1600us |
DP_AUX_CH_CTL_RECEIVE_ERROR |
(send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
}
static int
intel_dp_aux_ch(struct intel_dp *intel_dp,
const uint8_t *send, int send_bytes,
uint8_t *recv, int recv_size)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
uint32_t ch_data = ch_ctl + 4;
uint32_t aux_clock_divider;
int i, ret, recv_bytes;
uint32_t status;
int try, clock = 0;
bool has_aux_irq = HAS_AUX_IRQ(dev);
bool vdd;
pps_lock(intel_dp);
/*
* We will be called with VDD already enabled for dpcd/edid/oui reads.
* In such cases we want to leave VDD enabled and it's up to upper layers
* to turn it off. But for eg. i2c-dev access we need to turn it on/off
* ourselves.
*/
vdd = edp_panel_vdd_on(intel_dp);
/* dp aux is extremely sensitive to irq latency, hence request the
* lowest possible wakeup latency and so prevent the cpu from going into
* deep sleep states.
*/
pm_qos_update_request(&dev_priv->pm_qos, 0);
intel_dp_check_edp(intel_dp);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
intel_aux_display_runtime_get(dev_priv);
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
status = I915_READ_NOTRACE(ch_ctl);
if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
break;
msleep(1);
}
if (try == 3) {
WARN(1, "dp_aux_ch not started status 0x%08x\n",
I915_READ(ch_ctl));
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
ret = -EBUSY;
goto out;
}
/* Only 5 data registers! */
if (WARN_ON(send_bytes > 20 || recv_size > 20)) {
ret = -E2BIG;
goto out;
}
while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
has_aux_irq,
send_bytes,
aux_clock_divider);
/* Must try at least 3 times according to DP spec */
for (try = 0; try < 5; try++) {
/* Load the send data into the aux channel data registers */
for (i = 0; i < send_bytes; i += 4)
I915_WRITE(ch_data + i,
intel_dp_pack_aux(send + i,
send_bytes - i));
/* Send the command and wait for it to complete */
I915_WRITE(ch_ctl, send_ctl);
status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
/* Clear done status and any errors */
I915_WRITE(ch_ctl,
status |
DP_AUX_CH_CTL_DONE |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_RECEIVE_ERROR);
if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_RECEIVE_ERROR))
continue;
if (status & DP_AUX_CH_CTL_DONE)
break;
}
if (status & DP_AUX_CH_CTL_DONE)
break;
}
if ((status & DP_AUX_CH_CTL_DONE) == 0) {
DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
ret = -EBUSY;
goto out;
}
/* Check for timeout or receive error.
* Timeouts occur when the sink is not connected
*/
if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
ret = -EIO;
goto out;
}
/* Timeouts occur when the device isn't connected, so they're
* "normal" -- don't fill the kernel log with these */
if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
ret = -ETIMEDOUT;
goto out;
}
/* Unload any bytes sent back from the other side */
recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
if (recv_bytes > recv_size)
recv_bytes = recv_size;
for (i = 0; i < recv_bytes; i += 4)
intel_dp_unpack_aux(I915_READ(ch_data + i),
recv + i, recv_bytes - i);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
ret = recv_bytes;
out:
pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
drm/i915: allow package C8+ states on Haswell (disabled) This patch allows PC8+ states on Haswell. These states can only be reached when all the display outputs are disabled, and they allow some more power savings. The fact that the graphics device is allowing PC8+ doesn't mean that the machine will actually enter PC8+: all the other devices also need to allow PC8+. For now this option is disabled by default. You need i915.allow_pc8=1 if you want it. This patch adds a big comment inside i915_drv.h explaining how it works and how it tracks things. Read it. v2: (this is not really v2, many previous versions were already sent, but they had different names) - Use the new functions to enable/disable GTIMR and GEN6_PMIMR - Rename almost all variables and functions to names suggested by Chris - More WARNs on the IRQ handling code - Also disable PC8 when there's GPU work to do (thanks to Ben for the help on this), so apps can run caster - Enable PC8 on a delayed work function that is delayed for 5 seconds. This makes sure we only enable PC8+ if we're really idle - Make sure we're not in PC8+ when suspending v3: - WARN if IRQs are disabled on __wait_seqno - Replace some DRM_ERRORs with WARNs - Fix calls to restore GT and PM interrupts - Use intel_mark_busy instead of intel_ring_advance to disable PC8 v4: - Use the force_wake, Luke! v5: - Remove the "IIR is not zero" WARNs - Move the force_wake chunk to its own patch - Only restore what's missing from RC6, not everything Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-20 00:18:09 +08:00
intel_aux_display_runtime_put(dev_priv);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
if (vdd)
edp_panel_vdd_off(intel_dp, false);
pps_unlock(intel_dp);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 20:53:48 +08:00
return ret;
}
#define BARE_ADDRESS_SIZE 3
#define HEADER_SIZE (BARE_ADDRESS_SIZE + 1)
static ssize_t
intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
{
struct intel_dp *intel_dp = container_of(aux, struct intel_dp, aux);
uint8_t txbuf[20], rxbuf[20];
size_t txsize, rxsize;
int ret;
txbuf[0] = msg->request << 4;
txbuf[1] = msg->address >> 8;
txbuf[2] = msg->address & 0xff;
txbuf[3] = msg->size - 1;
switch (msg->request & ~DP_AUX_I2C_MOT) {
case DP_AUX_NATIVE_WRITE:
case DP_AUX_I2C_WRITE:
txsize = msg->size ? HEADER_SIZE + msg->size : BARE_ADDRESS_SIZE;
rxsize = 1;
if (WARN_ON(txsize > 20))
return -E2BIG;
memcpy(txbuf + HEADER_SIZE, msg->buffer, msg->size);
ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize);
if (ret > 0) {
msg->reply = rxbuf[0] >> 4;
/* Return payload size. */
ret = msg->size;
}
break;
case DP_AUX_NATIVE_READ:
case DP_AUX_I2C_READ:
txsize = msg->size ? HEADER_SIZE : BARE_ADDRESS_SIZE;
rxsize = msg->size + 1;
if (WARN_ON(rxsize > 20))
return -E2BIG;
ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize);
if (ret > 0) {
msg->reply = rxbuf[0] >> 4;
/*
* Assume happy day, and copy the data. The caller is
* expected to check msg->reply before touching it.
*
* Return payload size.
*/
ret--;
memcpy(msg->buffer, rxbuf + 1, ret);
}
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static void
intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum port port = intel_dig_port->port;
const char *name = NULL;
int ret;
switch (port) {
case PORT_A:
intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
name = "DPDDC-A";
break;
case PORT_B:
intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
name = "DPDDC-B";
break;
case PORT_C:
intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
name = "DPDDC-C";
break;
case PORT_D:
intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
name = "DPDDC-D";
break;
default:
BUG();
}
/*
* The AUX_CTL register is usually DP_CTL + 0x10.
*
* On Haswell and Broadwell though:
* - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
* - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
*
* Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
*/
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
drm/i915/dp: Fix I2C/EDID handling with active DisplayPort to DVI converter The DisplayPort standard (1.1a) states that: The I2C-over-AUX Reply field is valid only when Native AUX CH Reply field is AUX_ACK (00). When Native AUX CH Reply field is not 00, then, I2C-over-AUX Reply field must be 00 and be ignored. This fixes broken EDID reading when using an active DisplayPort to duallink DVI converter. If the AUX CH replier chooses to defer the transaction, a short read occurs and erroneous data is returned as the i2c reply due to a lack of length checking and failure to check for AUX ACK. As a result, broken EDIDs can look like: 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: bc bc bc ff bc bc bc ff bc bc bc ac bc bc bc 45 ???.???.???????E 10: bc bc bc 10 bc bc bc 34 bc bc bc ee bc bc bc 4c ???????4???????L 20: bc bc bc 50 bc bc bc 00 bc bc bc 40 bc bc bc 00 ???P???.???@???. 30: bc bc bc 01 bc bc bc 01 bc bc bc a0 bc bc bc 40 ???????????????@ 40: bc bc bc 00 bc bc bc 00 bc bc bc 00 bc bc bc 55 ???.???.???.???U 50: bc bc bc 35 bc bc bc 31 bc bc bc 20 bc bc bc fc ???5???1??? ???? 60: bc bc bc 4c bc bc bc 34 bc bc bc 46 bc bc bc 00 ???L???4???F???. 70: bc bc bc 38 bc bc bc 11 bc bc bc 20 bc bc bc 20 ???8??????? ??? 80: bc bc bc ff bc bc bc ff bc bc bc ff bc bc bc ff ???.???.???.???. ... which can lead to: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>30 30 30 30 30 30 30 32 38 32 30 32 63 63 31 61 000000028202cc1a <3>28 00 02 8c 00 00 00 00 18 00 00 00 00 00 00 00 (............... <3>20 4c 61 73 74 20 62 65 61 63 6f 6e 3a 20 33 32 Last beacon: 32 <3>32 30 6d 73 20 61 67 6f 46 00 05 8c 00 00 00 00 20ms agoF....... <3>36 00 00 00 00 00 00 00 00 0c 57 69 2d 46 69 20 6.........Wi-Fi <3>52 6f 75 74 65 72 01 08 82 84 8b 96 24 30 48 6c Router......$0Hl <3>03 01 01 06 02 00 00 2a 01 00 2f 01 00 32 04 0c .......*../..2.. <3>12 18 60 dd 09 00 10 18 02 00 00 01 00 00 18 00 ..`............. Signed-off-by: David Flynn <davidf@rd.bbc.co.uk> [ickle: fix up some surrounding checkpatch warnings] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-12-09 00:10:21 +08:00
intel_dp->aux.name = name;
intel_dp->aux.dev = dev->dev;
intel_dp->aux.transfer = intel_dp_aux_transfer;
drm/i915/dp: Fix I2C/EDID handling with active DisplayPort to DVI converter The DisplayPort standard (1.1a) states that: The I2C-over-AUX Reply field is valid only when Native AUX CH Reply field is AUX_ACK (00). When Native AUX CH Reply field is not 00, then, I2C-over-AUX Reply field must be 00 and be ignored. This fixes broken EDID reading when using an active DisplayPort to duallink DVI converter. If the AUX CH replier chooses to defer the transaction, a short read occurs and erroneous data is returned as the i2c reply due to a lack of length checking and failure to check for AUX ACK. As a result, broken EDIDs can look like: 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: bc bc bc ff bc bc bc ff bc bc bc ac bc bc bc 45 ???.???.???????E 10: bc bc bc 10 bc bc bc 34 bc bc bc ee bc bc bc 4c ???????4???????L 20: bc bc bc 50 bc bc bc 00 bc bc bc 40 bc bc bc 00 ???P???.???@???. 30: bc bc bc 01 bc bc bc 01 bc bc bc a0 bc bc bc 40 ???????????????@ 40: bc bc bc 00 bc bc bc 00 bc bc bc 00 bc bc bc 55 ???.???.???.???U 50: bc bc bc 35 bc bc bc 31 bc bc bc 20 bc bc bc fc ???5???1??? ???? 60: bc bc bc 4c bc bc bc 34 bc bc bc 46 bc bc bc 00 ???L???4???F???. 70: bc bc bc 38 bc bc bc 11 bc bc bc 20 bc bc bc 20 ???8??????? ??? 80: bc bc bc ff bc bc bc ff bc bc bc ff bc bc bc ff ???.???.???.???. ... which can lead to: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>30 30 30 30 30 30 30 32 38 32 30 32 63 63 31 61 000000028202cc1a <3>28 00 02 8c 00 00 00 00 18 00 00 00 00 00 00 00 (............... <3>20 4c 61 73 74 20 62 65 61 63 6f 6e 3a 20 33 32 Last beacon: 32 <3>32 30 6d 73 20 61 67 6f 46 00 05 8c 00 00 00 00 20ms agoF....... <3>36 00 00 00 00 00 00 00 00 0c 57 69 2d 46 69 20 6.........Wi-Fi <3>52 6f 75 74 65 72 01 08 82 84 8b 96 24 30 48 6c Router......$0Hl <3>03 01 01 06 02 00 00 2a 01 00 2f 01 00 32 04 0c .......*../..2.. <3>12 18 60 dd 09 00 10 18 02 00 00 01 00 00 18 00 ..`............. Signed-off-by: David Flynn <davidf@rd.bbc.co.uk> [ickle: fix up some surrounding checkpatch warnings] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-12-09 00:10:21 +08:00
DRM_DEBUG_KMS("registering %s bus for %s\n", name,
connector->base.kdev->kobj.name);
drm/i915/dp: Fix I2C/EDID handling with active DisplayPort to DVI converter The DisplayPort standard (1.1a) states that: The I2C-over-AUX Reply field is valid only when Native AUX CH Reply field is AUX_ACK (00). When Native AUX CH Reply field is not 00, then, I2C-over-AUX Reply field must be 00 and be ignored. This fixes broken EDID reading when using an active DisplayPort to duallink DVI converter. If the AUX CH replier chooses to defer the transaction, a short read occurs and erroneous data is returned as the i2c reply due to a lack of length checking and failure to check for AUX ACK. As a result, broken EDIDs can look like: 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: bc bc bc ff bc bc bc ff bc bc bc ac bc bc bc 45 ???.???.???????E 10: bc bc bc 10 bc bc bc 34 bc bc bc ee bc bc bc 4c ???????4???????L 20: bc bc bc 50 bc bc bc 00 bc bc bc 40 bc bc bc 00 ???P???.???@???. 30: bc bc bc 01 bc bc bc 01 bc bc bc a0 bc bc bc 40 ???????????????@ 40: bc bc bc 00 bc bc bc 00 bc bc bc 00 bc bc bc 55 ???.???.???.???U 50: bc bc bc 35 bc bc bc 31 bc bc bc 20 bc bc bc fc ???5???1??? ???? 60: bc bc bc 4c bc bc bc 34 bc bc bc 46 bc bc bc 00 ???L???4???F???. 70: bc bc bc 38 bc bc bc 11 bc bc bc 20 bc bc bc 20 ???8??????? ??? 80: bc bc bc ff bc bc bc ff bc bc bc ff bc bc bc ff ???.???.???.???. ... which can lead to: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>30 30 30 30 30 30 30 32 38 32 30 32 63 63 31 61 000000028202cc1a <3>28 00 02 8c 00 00 00 00 18 00 00 00 00 00 00 00 (............... <3>20 4c 61 73 74 20 62 65 61 63 6f 6e 3a 20 33 32 Last beacon: 32 <3>32 30 6d 73 20 61 67 6f 46 00 05 8c 00 00 00 00 20ms agoF....... <3>36 00 00 00 00 00 00 00 00 0c 57 69 2d 46 69 20 6.........Wi-Fi <3>52 6f 75 74 65 72 01 08 82 84 8b 96 24 30 48 6c Router......$0Hl <3>03 01 01 06 02 00 00 2a 01 00 2f 01 00 32 04 0c .......*../..2.. <3>12 18 60 dd 09 00 10 18 02 00 00 01 00 00 18 00 ..`............. Signed-off-by: David Flynn <davidf@rd.bbc.co.uk> [ickle: fix up some surrounding checkpatch warnings] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-12-09 00:10:21 +08:00
ret = drm_dp_aux_register(&intel_dp->aux);
if (ret < 0) {
DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
name, ret);
return;
}
ret = sysfs_create_link(&connector->base.kdev->kobj,
&intel_dp->aux.ddc.dev.kobj,
intel_dp->aux.ddc.dev.kobj.name);
if (ret < 0) {
DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
drm_dp_aux_unregister(&intel_dp->aux);
}
}
2014-02-11 23:12:49 +08:00
static void
intel_dp_connector_unregister(struct intel_connector *intel_connector)
{
struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base);
2014-05-02 12:02:48 +08:00
if (!intel_connector->mst_port)
sysfs_remove_link(&intel_connector->base.kdev->kobj,
intel_dp->aux.ddc.dev.kobj.name);
2014-02-11 23:12:49 +08:00
intel_connector_unregister(intel_connector);
}
static void
skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_bw)
{
u32 ctrl1;
pipe_config->ddi_pll_sel = SKL_DPLL0;
pipe_config->dpll_hw_state.cfgcr1 = 0;
pipe_config->dpll_hw_state.cfgcr2 = 0;
ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
switch (link_bw) {
case DP_LINK_BW_1_62:
ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810,
SKL_DPLL0);
break;
case DP_LINK_BW_2_7:
ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350,
SKL_DPLL0);
break;
case DP_LINK_BW_5_4:
ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700,
SKL_DPLL0);
break;
}
pipe_config->dpll_hw_state.ctrl1 = ctrl1;
}
static void
hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw)
{
switch (link_bw) {
case DP_LINK_BW_1_62:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
break;
case DP_LINK_BW_2_7:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
break;
case DP_LINK_BW_5_4:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
break;
}
}
static void
intel_dp_set_clock(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config, int link_bw)
{
struct drm_device *dev = encoder->base.dev;
const struct dp_link_dpll *divisor = NULL;
int i, count = 0;
if (IS_G4X(dev)) {
divisor = gen4_dpll;
count = ARRAY_SIZE(gen4_dpll);
} else if (HAS_PCH_SPLIT(dev)) {
divisor = pch_dpll;
count = ARRAY_SIZE(pch_dpll);
} else if (IS_CHERRYVIEW(dev)) {
divisor = chv_dpll;
count = ARRAY_SIZE(chv_dpll);
} else if (IS_VALLEYVIEW(dev)) {
divisor = vlv_dpll;
count = ARRAY_SIZE(vlv_dpll);
}
if (divisor && count) {
for (i = 0; i < count; i++) {
if (link_bw == divisor[i].link_bw) {
pipe_config->dpll = divisor[i].dpll;
pipe_config->clock_set = true;
break;
}
}
}
}
bool
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
enum port port = dp_to_dig_port(intel_dp)->port;
struct intel_crtc *intel_crtc = encoder->new_crtc;
struct intel_connector *intel_connector = intel_dp->attached_connector;
int lane_count, clock;
int min_lane_count = 1;
int max_lane_count = intel_dp_max_lane_count(intel_dp);
/* Conveniently, the link BW constants become indices with a shift...*/
int min_clock = 0;
int max_clock = intel_dp_max_link_bw(intel_dp) >> 3;
int bpp, mode_rate;
static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
drm/i915: store adjusted dotclock in adjusted_mode->clock ... not the port clock. This allows us to kill the funny semantics around pixel_target_clock. Since the dpll code still needs the real port clock, add a new port_clock field to the pipe configuration. Handling the default case for that one is a bit tricky, since encoders might not consistently overwrite it when retrying the crtc/encoder bw arbitrage step in the compute config stage. Hence we need to always clear port_clock and update it again if the encoder hasn't put in something more specific. This can't be done in one step since the encoder might want to adjust the mode first. I was a bit on the fence whether I should subsume the pixel multiplier handling into the port_clock, too. But then I decided against this since it's on an abstract level still the dotclock of the adjusted mode, and only our hw makes it a bit special due to the separate pixel mulitplier setting (which requires that the dpll runs at the non-multiplied dotclock). So after this patch the adjusted_mode accurately describes the mode we feed into the port, after the panel fitter and pixel multiplier (or line doubling, if we ever bother with that) have done their job. Since the fdi link is between the pfit and the pixel multiplier steps we need to be careful with calculating the fdi link config. v2: Fix up ilk cpu pll handling. v3: Introduce an fdi_dotclock variable in ironlake_fdi_compute_config to make it clearer that we transmit the adjusted_mode without the pixel multiplier taken into account. The old code multiplied the the available link bw with the pixel multiplier, which results in the same fdi configuration, but is much more confusing. v4: Rebase on top of Imre's is_cpu_edp removal. v5: Rebase on top of Paulo's haswell watermark fixes, which introduce a new place which looked at the pixel_clock and so needed conversion. v6: Split out prep patches as requested by Paulo Zanoni. Also rebase on top of the fdi dotclock handling fix in the fdi lanes/bw computation code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-01 23:16:21 +08:00
int link_avail, link_clock;
if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
pipe_config->has_pch_encoder = true;
pipe_config->has_dp_encoder = true;
pipe_config->has_drrs = false;
pipe_config->has_audio = intel_dp->has_audio;
if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
adjusted_mode);
if (!HAS_PCH_SPLIT(dev))
intel_gmch_panel_fitting(intel_crtc, pipe_config,
intel_connector->panel.fitting_mode);
else
intel_pch_panel_fitting(intel_crtc, pipe_config,
intel_connector->panel.fitting_mode);
}
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
return false;
DRM_DEBUG_KMS("DP link computation with max lane count %i "
"max bw %02x pixel clock %iKHz\n",
max_lane_count, bws[max_clock],
adjusted_mode->crtc_clock);
/* Walk through all bpp values. Luckily they're all nicely spaced with 2
* bpc in between. */
bpp = pipe_config->pipe_bpp;
if (is_edp(intel_dp)) {
if (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp) {
DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n",
dev_priv->vbt.edp_bpp);
bpp = dev_priv->vbt.edp_bpp;
}
/*
* Use the maximum clock and number of lanes the eDP panel
* advertizes being capable of. The panels are generally
* designed to support only a single clock and lane
* configuration, and typically these values correspond to the
* native resolution of the panel.
*/
min_lane_count = max_lane_count;
min_clock = max_clock;
}
for (; bpp >= 6*3; bpp -= 2*3) {
mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
bpp);
for (clock = min_clock; clock <= max_clock; clock++) {
for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
link_avail = intel_dp_max_data_rate(link_clock,
lane_count);
if (mode_rate <= link_avail) {
goto found;
}
}
}
}
return false;
found:
if (intel_dp->color_range_auto) {
/*
* See:
* CEA-861-E - 5.1 Default Encoding Parameters
* VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
*/
if (bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1)
intel_dp->color_range = DP_COLOR_RANGE_16_235;
else
intel_dp->color_range = 0;
}
if (intel_dp->color_range)
pipe_config->limited_color_range = true;
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
pipe_config->pipe_bpp = bpp;
drm/i915: store adjusted dotclock in adjusted_mode->clock ... not the port clock. This allows us to kill the funny semantics around pixel_target_clock. Since the dpll code still needs the real port clock, add a new port_clock field to the pipe configuration. Handling the default case for that one is a bit tricky, since encoders might not consistently overwrite it when retrying the crtc/encoder bw arbitrage step in the compute config stage. Hence we need to always clear port_clock and update it again if the encoder hasn't put in something more specific. This can't be done in one step since the encoder might want to adjust the mode first. I was a bit on the fence whether I should subsume the pixel multiplier handling into the port_clock, too. But then I decided against this since it's on an abstract level still the dotclock of the adjusted mode, and only our hw makes it a bit special due to the separate pixel mulitplier setting (which requires that the dpll runs at the non-multiplied dotclock). So after this patch the adjusted_mode accurately describes the mode we feed into the port, after the panel fitter and pixel multiplier (or line doubling, if we ever bother with that) have done their job. Since the fdi link is between the pfit and the pixel multiplier steps we need to be careful with calculating the fdi link config. v2: Fix up ilk cpu pll handling. v3: Introduce an fdi_dotclock variable in ironlake_fdi_compute_config to make it clearer that we transmit the adjusted_mode without the pixel multiplier taken into account. The old code multiplied the the available link bw with the pixel multiplier, which results in the same fdi configuration, but is much more confusing. v4: Rebase on top of Imre's is_cpu_edp removal. v5: Rebase on top of Paulo's haswell watermark fixes, which introduce a new place which looked at the pixel_clock and so needed conversion. v6: Split out prep patches as requested by Paulo Zanoni. Also rebase on top of the fdi dotclock handling fix in the fdi lanes/bw computation code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-01 23:16:21 +08:00
pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
intel_dp->link_bw, intel_dp->lane_count,
drm/i915: store adjusted dotclock in adjusted_mode->clock ... not the port clock. This allows us to kill the funny semantics around pixel_target_clock. Since the dpll code still needs the real port clock, add a new port_clock field to the pipe configuration. Handling the default case for that one is a bit tricky, since encoders might not consistently overwrite it when retrying the crtc/encoder bw arbitrage step in the compute config stage. Hence we need to always clear port_clock and update it again if the encoder hasn't put in something more specific. This can't be done in one step since the encoder might want to adjust the mode first. I was a bit on the fence whether I should subsume the pixel multiplier handling into the port_clock, too. But then I decided against this since it's on an abstract level still the dotclock of the adjusted mode, and only our hw makes it a bit special due to the separate pixel mulitplier setting (which requires that the dpll runs at the non-multiplied dotclock). So after this patch the adjusted_mode accurately describes the mode we feed into the port, after the panel fitter and pixel multiplier (or line doubling, if we ever bother with that) have done their job. Since the fdi link is between the pfit and the pixel multiplier steps we need to be careful with calculating the fdi link config. v2: Fix up ilk cpu pll handling. v3: Introduce an fdi_dotclock variable in ironlake_fdi_compute_config to make it clearer that we transmit the adjusted_mode without the pixel multiplier taken into account. The old code multiplied the the available link bw with the pixel multiplier, which results in the same fdi configuration, but is much more confusing. v4: Rebase on top of Imre's is_cpu_edp removal. v5: Rebase on top of Paulo's haswell watermark fixes, which introduce a new place which looked at the pixel_clock and so needed conversion. v6: Split out prep patches as requested by Paulo Zanoni. Also rebase on top of the fdi dotclock handling fix in the fdi lanes/bw computation code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-01 23:16:21 +08:00
pipe_config->port_clock, bpp);
DRM_DEBUG_KMS("DP link bw required %i available %i\n",
mode_rate, link_avail);
intel_link_compute_m_n(bpp, lane_count,
adjusted_mode->crtc_clock,
pipe_config->port_clock,
&pipe_config->dp_m_n);
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
if (intel_connector->panel.downclock_mode != NULL &&
dev_priv->drrs.type == SEAMLESS_DRRS_SUPPORT) {
pipe_config->has_drrs = true;
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
intel_link_compute_m_n(bpp, lane_count,
intel_connector->panel.downclock_mode->clock,
pipe_config->port_clock,
&pipe_config->dp_m2_n2);
}
if (IS_SKYLAKE(dev) && is_edp(intel_dp))
skl_edp_set_pll_config(pipe_config, intel_dp->link_bw);
else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
else
intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
return true;
}
static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dpa_ctl;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
DRM_DEBUG_KMS("eDP PLL enable for clock %d\n",
crtc->config->port_clock);
dpa_ctl = I915_READ(DP_A);
dpa_ctl &= ~DP_PLL_FREQ_MASK;
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
if (crtc->config->port_clock == 162000) {
/* For a long time we've carried around a ILK-DevA w/a for the
* 160MHz clock. If we're really unlucky, it's still required.
*/
DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
dpa_ctl |= DP_PLL_FREQ_160MHZ;
intel_dp->DP |= DP_PLL_FREQ_160MHZ;
} else {
dpa_ctl |= DP_PLL_FREQ_270MHZ;
intel_dp->DP |= DP_PLL_FREQ_270MHZ;
}
I915_WRITE(DP_A, dpa_ctl);
POSTING_READ(DP_A);
udelay(500);
}
static void intel_dp_prepare(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
enum port port = dp_to_dig_port(intel_dp)->port;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
/*
* There are four kinds of DP registers:
*
* IBX PCH
* SNB CPU
* IVB CPU
* CPT PCH
*
* IBX PCH and CPU are the same for almost everything,
* except that the CPU DP PLL is configured in this
* register
*
* CPT PCH is quite different, having many bits moved
* to the TRANS_DP_CTL register instead. That
* configuration happens (oddly) in ironlake_pch_enable
*/
/* Preserve the BIOS-computed detected bit. This is
* supposed to be read-only.
*/
intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
/* Handle DP bits in common between all three register formats */
intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count);
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
if (crtc->config->has_audio)
intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
/* Split out the IBX/CPU vs CPT settings */
if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
intel_dp->DP |= DP_SYNC_HS_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
intel_dp->DP |= DP_SYNC_VS_HIGH;
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
intel_dp->DP |= DP_ENHANCED_FRAMING;
intel_dp->DP |= crtc->pipe << 29;
} else if (!HAS_PCH_CPT(dev) || port == PORT_A) {
if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev))
intel_dp->DP |= intel_dp->color_range;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
intel_dp->DP |= DP_SYNC_HS_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
intel_dp->DP |= DP_SYNC_VS_HIGH;
intel_dp->DP |= DP_LINK_TRAIN_OFF;
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
intel_dp->DP |= DP_ENHANCED_FRAMING;
if (!IS_CHERRYVIEW(dev)) {
if (crtc->pipe == 1)
intel_dp->DP |= DP_PIPEB_SELECT;
} else {
intel_dp->DP |= DP_PIPE_SELECT_CHV(crtc->pipe);
}
} else {
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
}
#define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
#define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE)
drm/i915: don't wait for power cycle when waiting for power off Function ironlake_wait_panel_off should just wait for the power off delay, while function ironlake_wait_panel_power_cycle should wait for the panel cycle (that's required after we turn the panel off, before we enable it again). The problem is that, currently, ironlake_wait_panel_off is waiting not just for the panel to be off, but also for the power cycle delay and the backlight off delay. This function relies on the PP_STATUS bits 3:0, which are not documented and not supposed to be used. A quick analysis of the values we get while waiting quickly shows that power off is reached while bits 3:0 are still 0x1, and the time it takes to become 0x0 is the power cycle delay. On my system with backlight off delay of 200ms, power down delay of 50ms and power cycle delay of 500ms, this is what I get: - Start waiting with value 0x80000008, timestamp 6.429364. - Jumps to 0xa0000003, timestamp 6.431360 (time waited: 0.001996) - Jumps to 0xa0000002, timestamp 6.631277 (time waited: 0.201913) - Jumps to 0x08000001, timestamp 6.681258 (time waited: 0.251894) - Jumps to 0x00000000, timestamp 7.192012 (time waited: 0.762648) As you can see, ironlake_wait_panel_off is sleeping 760ms instead of the expected 50ms: the first 200ms matches the backlight off delay (which we should already have waited for!), then the 50ms for the real panel off delay, then the 500ms for the panel power cycle. This patch makes is look just at bits 31 and 29:28, which will ignore the panel power cycle. And just to be clear: this saves 500ms on my system every time we disable the panel. But we can still save 200ms more (the backlight off delay) on the next patches. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuougseek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-20 00:29:43 +08:00
#define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0)
#define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0)
#define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
#define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE)
static void wait_panel_status(struct intel_dp *intel_dp,
u32 mask,
u32 value)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_stat_reg, pp_ctrl_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
pp_stat_reg = _pp_stat_reg(intel_dp);
pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
mask, value,
I915_READ(pp_stat_reg),
I915_READ(pp_ctrl_reg));
if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, 5000, 10)) {
DRM_ERROR("Panel status timeout: status %08x control %08x\n",
I915_READ(pp_stat_reg),
I915_READ(pp_ctrl_reg));
}
DRM_DEBUG_KMS("Wait complete\n");
}
static void wait_panel_on(struct intel_dp *intel_dp)
{
DRM_DEBUG_KMS("Wait for panel power on\n");
wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE);
}
static void wait_panel_off(struct intel_dp *intel_dp)
{
DRM_DEBUG_KMS("Wait for panel power off time\n");
wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
}
static void wait_panel_power_cycle(struct intel_dp *intel_dp)
{
DRM_DEBUG_KMS("Wait for panel power cycle\n");
/* When we disable the VDD override bit last we have to do the manual
* wait. */
wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle,
intel_dp->panel_power_cycle_delay);
wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
}
static void wait_backlight_on(struct intel_dp *intel_dp)
{
wait_remaining_ms_from_jiffies(intel_dp->last_power_on,
intel_dp->backlight_on_delay);
}
static void edp_wait_backlight_off(struct intel_dp *intel_dp)
{
wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off,
intel_dp->backlight_off_delay);
}
/* Read the current pp_control value, unlocking the register if it
* is locked
*/
static u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 control;
lockdep_assert_held(&dev_priv->pps_mutex);
control = I915_READ(_pp_ctrl_reg(intel_dp));
control &= ~PANEL_UNLOCK_MASK;
control |= PANEL_UNLOCK_REGS;
return control;
}
/*
* Must be paired with edp_panel_vdd_off().
* Must hold pps_mutex around the whole on/off sequence.
* Can be nested with intel_edp_panel_vdd_{on,off}() calls.
*/
static bool edp_panel_vdd_on(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
u32 pp;
u32 pp_stat_reg, pp_ctrl_reg;
bool need_to_disable = !intel_dp->want_panel_vdd;
lockdep_assert_held(&dev_priv->pps_mutex);
if (!is_edp(intel_dp))
return false;
cancel_delayed_work(&intel_dp->panel_vdd_work);
intel_dp->want_panel_vdd = true;
if (edp_have_panel_vdd(intel_dp))
return need_to_disable;
power_domain = intel_display_port_power_domain(intel_encoder);
intel_display_power_get(dev_priv, power_domain);
DRM_DEBUG_KMS("Turning eDP port %c VDD on\n",
port_name(intel_dig_port->port));
if (!edp_have_panel_power(intel_dp))
wait_panel_power_cycle(intel_dp);
pp = ironlake_get_pp_control(intel_dp);
pp |= EDP_FORCE_VDD;
pp_stat_reg = _pp_stat_reg(intel_dp);
pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
/*
* If the panel wasn't on, delay before accessing aux channel
*/
if (!edp_have_panel_power(intel_dp)) {
DRM_DEBUG_KMS("eDP port %c panel power wasn't enabled\n",
port_name(intel_dig_port->port));
drm/i915: Correct eDP panel power sequencing delay computations Store the panel power sequencing delays in the dp private structure, rather than the global device structure. Who knows, maybe we'll get more than one eDP device in the future. From the eDP spec, we need the following numbers: T1 + T3 Power on to Aux Channel operation (panel_power_up_delay) This marks how long it takes the panel to boot up and get ready to receive aux channel communications. T8 Video signal to backlight on (backlight_on_delay) Once a valid video signal is being sent to the device, it can take a while before the panel is actuall showing useful data. This delay allows the panel to get something reasonable up before the backlight is turned on. T9 Backlight off to video off (backlight_off_delay) Turning the backlight off can take a moment, so this delay makes sure there is still valid video data on the screen. T10 Video off to power off (panel_power_down_delay) Presumably this delay allows the panel to perform an orderly shutdown of the display. T11 + T12 Power off to power on (panel_power_cycle_delay) So, once you turn the panel off, you have to wait a while before you can turn it back on. This delay is usually the longest in the entire sequence. Neither the VBIOS source code nor the hardware documentation has a clear mapping between the delay values they provide and those required by the eDP spec. The VBIOS code actually uses two different labels for the delay values in the five words of the relevant VBT table. **** MORE LATER *** Look at both the current hardware register settings and the VBT specified panel power sequencing timings. Use the maximum of the two delays, to make sure things work reliably. If there is no VBT data, then those values will be initialized to zero, so we'll just use the values as programmed in the hardware. Note that the BIOS just fetches delays from the VBT table to place in the hardware registers, so we should get the same values from both places, except for rounding. VBT doesn't provide any values for T1 or T2, so we'll always just use the hardware value for that. The panel power up delay is thus T1 + T2 + T3, which should be sufficient in all cases. The panel power down delay is T1 + T2 + T12, using T1+T2 as a proxy for T11, which isn't available anywhere. For the backlight delays, the eDP spec says T6 + T8 is the delay from the end of link training to backlight on and T9 is the delay from backlight off until video off. The hardware provides a 'backlight on' delay, which I'm taking to be T6 + T8 while the VBT provides something called 'T7', which I'm assuming is s On the macbook air I'm testing with, this yields a power-up delay of over 200ms and a power-down delay of over 600ms. It all works now, but we're frobbing these power controls several times during mode setting, making the whole process take an awfully long time. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-29 07:48:10 +08:00
msleep(intel_dp->panel_power_up_delay);
}
return need_to_disable;
}
/*
* Must be paired with intel_edp_panel_vdd_off() or
* intel_edp_panel_off().
* Nested calls to these functions are not allowed since
* we drop the lock. Caller must use some higher level
* locking to prevent nested calls from other threads.
*/
void intel_edp_panel_vdd_on(struct intel_dp *intel_dp)
{
bool vdd;
if (!is_edp(intel_dp))
return;
pps_lock(intel_dp);
vdd = edp_panel_vdd_on(intel_dp);
pps_unlock(intel_dp);
I915_STATE_WARN(!vdd, "eDP port %c VDD already requested on\n",
port_name(dp_to_dig_port(intel_dp)->port));
}
static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port =
dp_to_dig_port(intel_dp);
struct intel_encoder *intel_encoder = &intel_dig_port->base;
enum intel_display_power_domain power_domain;
u32 pp;
u32 pp_stat_reg, pp_ctrl_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
WARN_ON(intel_dp->want_panel_vdd);
if (!edp_have_panel_vdd(intel_dp))
return;
DRM_DEBUG_KMS("Turning eDP port %c VDD off\n",
port_name(intel_dig_port->port));
pp = ironlake_get_pp_control(intel_dp);
pp &= ~EDP_FORCE_VDD;
pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
pp_stat_reg = _pp_stat_reg(intel_dp);
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
/* Make sure sequencer is idle before allowing subsequent activity */
DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
if ((pp & POWER_TARGET_ON) == 0)
intel_dp->last_power_cycle = jiffies;
power_domain = intel_display_port_power_domain(intel_encoder);
intel_display_power_put(dev_priv, power_domain);
}
static void edp_panel_vdd_work(struct work_struct *__work)
{
struct intel_dp *intel_dp = container_of(to_delayed_work(__work),
struct intel_dp, panel_vdd_work);
pps_lock(intel_dp);
if (!intel_dp->want_panel_vdd)
edp_panel_vdd_off_sync(intel_dp);
pps_unlock(intel_dp);
}
static void edp_panel_vdd_schedule_off(struct intel_dp *intel_dp)
{
unsigned long delay;
/*
* Queue the timer to fire a long time from now (relative to the power
* down delay) to keep the panel power up across a sequence of
* operations.
*/
delay = msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5);
schedule_delayed_work(&intel_dp->panel_vdd_work, delay);
}
/*
* Must be paired with edp_panel_vdd_on().
* Must hold pps_mutex around the whole on/off sequence.
* Can be nested with intel_edp_panel_vdd_{on,off}() calls.
*/
static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
{
struct drm_i915_private *dev_priv =
intel_dp_to_dev(intel_dp)->dev_private;
lockdep_assert_held(&dev_priv->pps_mutex);
if (!is_edp(intel_dp))
return;
I915_STATE_WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
port_name(dp_to_dig_port(intel_dp)->port));
intel_dp->want_panel_vdd = false;
if (sync)
edp_panel_vdd_off_sync(intel_dp);
else
edp_panel_vdd_schedule_off(intel_dp);
}
static void edp_panel_on(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
u32 pp_ctrl_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
if (!is_edp(intel_dp))
return;
DRM_DEBUG_KMS("Turn eDP port %c panel power on\n",
port_name(dp_to_dig_port(intel_dp)->port));
if (WARN(edp_have_panel_power(intel_dp),
"eDP port %c panel power already on\n",
port_name(dp_to_dig_port(intel_dp)->port)))
return;
wait_panel_power_cycle(intel_dp);
pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
pp = ironlake_get_pp_control(intel_dp);
if (IS_GEN5(dev)) {
/* ILK workaround: disable reset around power sequence */
pp &= ~PANEL_POWER_RESET;
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
}
pp |= POWER_TARGET_ON;
if (!IS_GEN5(dev))
pp |= PANEL_POWER_RESET;
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
wait_panel_on(intel_dp);
intel_dp->last_power_on = jiffies;
if (IS_GEN5(dev)) {
pp |= PANEL_POWER_RESET; /* restore panel reset bit */
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
}
}
void intel_edp_panel_on(struct intel_dp *intel_dp)
{
if (!is_edp(intel_dp))
return;
pps_lock(intel_dp);
edp_panel_on(intel_dp);
pps_unlock(intel_dp);
}
static void edp_panel_off(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
u32 pp;
u32 pp_ctrl_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
if (!is_edp(intel_dp))
return;
DRM_DEBUG_KMS("Turn eDP port %c panel power off\n",
port_name(dp_to_dig_port(intel_dp)->port));
WARN(!intel_dp->want_panel_vdd, "Need eDP port %c VDD to turn off panel\n",
port_name(dp_to_dig_port(intel_dp)->port));
drm/i915: finish off reverting eDP VDD changes This is a small follow-up fix to the series of eDP VDD back and forth we've had recently. This is effectively a combined revert of three commits: commit 2c2894f698fffd8ff53e1e1d3834f9e1035b1f39 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Mar 7 20:05:20 2014 -0300 drm/i915: properly disable the VDD when disabling the panel commit b3064154dfd37deb386b1e459c54e1ca2460b3d5 Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Date: Tue Mar 4 00:42:44 2014 +0100 drm/i915: Don't just say it, actually force edp vdd commit dff392dbd258381a6c3164f38420593f2d291e3b Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Dec 6 17:32:41 2013 -0200 drm/i915: don't touch the VDD when disabling the panel which shows that we're pretty close back to where we started already. The first two were basically reverting the last, but missing the WARN. Add that back. We also OCD the intel_ prefix back to intel_edp_panel_vdd_on() which was lost somewhere in between. The circle closes. For future reference, "drm/i915: don't touch the VDD when disabling the panel" failed to take into account commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel and commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Aug 12 22:17:14 2012 +0200 drm/i915: reorder edp disabling to fix ivb MacBook Air Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-17 22:43:36 +08:00
pp = ironlake_get_pp_control(intel_dp);
drm/i915: reorder edp disabling to fix ivb MacBook Air eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer <sildurin@gmail.com> Tested-by: Daniel Wagner <wagi@monom.org> Tested-by: Keith Packard <keithp@keithp.com> Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-13 04:17:14 +08:00
/* We need to switch off panel power _and_ force vdd, for otherwise some
* panels get very unhappy and cease to work. */
pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_FORCE_VDD |
EDP_BLC_ENABLE);
pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
intel_dp->want_panel_vdd = false;
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
intel_dp->last_power_cycle = jiffies;
wait_panel_off(intel_dp);
/* We got a reference when we enabled the VDD. */
power_domain = intel_display_port_power_domain(intel_encoder);
intel_display_power_put(dev_priv, power_domain);
}
void intel_edp_panel_off(struct intel_dp *intel_dp)
{
if (!is_edp(intel_dp))
return;
pps_lock(intel_dp);
edp_panel_off(intel_dp);
pps_unlock(intel_dp);
}
/* Enable backlight in the panel power control. */
static void _intel_edp_backlight_on(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
u32 pp_ctrl_reg;
/*
* If we enable the backlight right away following a panel power
* on, we may see slight flicker as the panel syncs with the eDP
* link. So delay a bit to make sure the image is solid before
* allowing it to appear.
*/
wait_backlight_on(intel_dp);
pps_lock(intel_dp);
pp = ironlake_get_pp_control(intel_dp);
pp |= EDP_BLC_ENABLE;
pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
pps_unlock(intel_dp);
}
/* Enable backlight PWM and backlight PP control. */
void intel_edp_backlight_on(struct intel_dp *intel_dp)
{
if (!is_edp(intel_dp))
return;
DRM_DEBUG_KMS("\n");
intel_panel_enable_backlight(intel_dp->attached_connector);
_intel_edp_backlight_on(intel_dp);
}
/* Disable backlight in the panel power control. */
static void _intel_edp_backlight_off(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
u32 pp_ctrl_reg;
drm/i915: Correct eDP panel power sequencing delay computations Store the panel power sequencing delays in the dp private structure, rather than the global device structure. Who knows, maybe we'll get more than one eDP device in the future. From the eDP spec, we need the following numbers: T1 + T3 Power on to Aux Channel operation (panel_power_up_delay) This marks how long it takes the panel to boot up and get ready to receive aux channel communications. T8 Video signal to backlight on (backlight_on_delay) Once a valid video signal is being sent to the device, it can take a while before the panel is actuall showing useful data. This delay allows the panel to get something reasonable up before the backlight is turned on. T9 Backlight off to video off (backlight_off_delay) Turning the backlight off can take a moment, so this delay makes sure there is still valid video data on the screen. T10 Video off to power off (panel_power_down_delay) Presumably this delay allows the panel to perform an orderly shutdown of the display. T11 + T12 Power off to power on (panel_power_cycle_delay) So, once you turn the panel off, you have to wait a while before you can turn it back on. This delay is usually the longest in the entire sequence. Neither the VBIOS source code nor the hardware documentation has a clear mapping between the delay values they provide and those required by the eDP spec. The VBIOS code actually uses two different labels for the delay values in the five words of the relevant VBT table. **** MORE LATER *** Look at both the current hardware register settings and the VBT specified panel power sequencing timings. Use the maximum of the two delays, to make sure things work reliably. If there is no VBT data, then those values will be initialized to zero, so we'll just use the values as programmed in the hardware. Note that the BIOS just fetches delays from the VBT table to place in the hardware registers, so we should get the same values from both places, except for rounding. VBT doesn't provide any values for T1 or T2, so we'll always just use the hardware value for that. The panel power up delay is thus T1 + T2 + T3, which should be sufficient in all cases. The panel power down delay is T1 + T2 + T12, using T1+T2 as a proxy for T11, which isn't available anywhere. For the backlight delays, the eDP spec says T6 + T8 is the delay from the end of link training to backlight on and T9 is the delay from backlight off until video off. The hardware provides a 'backlight on' delay, which I'm taking to be T6 + T8 while the VBT provides something called 'T7', which I'm assuming is s On the macbook air I'm testing with, this yields a power-up delay of over 200ms and a power-down delay of over 600ms. It all works now, but we're frobbing these power controls several times during mode setting, making the whole process take an awfully long time. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-29 07:48:10 +08:00
if (!is_edp(intel_dp))
return;
pps_lock(intel_dp);
pp = ironlake_get_pp_control(intel_dp);
pp &= ~EDP_BLC_ENABLE;
pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
pps_unlock(intel_dp);
intel_dp->last_backlight_off = jiffies;
edp_wait_backlight_off(intel_dp);
}
/* Disable backlight PP control and backlight PWM. */
void intel_edp_backlight_off(struct intel_dp *intel_dp)
{
if (!is_edp(intel_dp))
return;
DRM_DEBUG_KMS("\n");
_intel_edp_backlight_off(intel_dp);
intel_panel_disable_backlight(intel_dp->attached_connector);
}
/*
* Hook for controlling the panel power control backlight through the bl_power
* sysfs attribute. Take care to handle multiple calls.
*/
static void intel_edp_backlight_power(struct intel_connector *connector,
bool enable)
{
struct intel_dp *intel_dp = intel_attached_dp(&connector->base);
bool is_enabled;
pps_lock(intel_dp);
is_enabled = ironlake_get_pp_control(intel_dp) & EDP_BLC_ENABLE;
pps_unlock(intel_dp);
if (is_enabled == enable)
return;
DRM_DEBUG_KMS("panel power control backlight %s\n",
enable ? "enable" : "disable");
if (enable)
_intel_edp_backlight_on(intel_dp);
else
_intel_edp_backlight_off(intel_dp);
}
static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dpa_ctl;
assert_pipe_disabled(dev_priv,
to_intel_crtc(crtc)->pipe);
DRM_DEBUG_KMS("\n");
dpa_ctl = I915_READ(DP_A);
WARN(dpa_ctl & DP_PLL_ENABLE, "dp pll on, should be off\n");
WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n");
/* We don't adjust intel_dp->DP while tearing down the link, to
* facilitate link retraining (e.g. after hotplug). Hence clear all
* enable bits here to ensure that we don't enable too much. */
intel_dp->DP &= ~(DP_PORT_EN | DP_AUDIO_OUTPUT_ENABLE);
intel_dp->DP |= DP_PLL_ENABLE;
I915_WRITE(DP_A, intel_dp->DP);
POSTING_READ(DP_A);
udelay(200);
}
static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dpa_ctl;
assert_pipe_disabled(dev_priv,
to_intel_crtc(crtc)->pipe);
dpa_ctl = I915_READ(DP_A);
WARN((dpa_ctl & DP_PLL_ENABLE) == 0,
"dp pll off, should be on\n");
WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n");
/* We can't rely on the value tracked for the DP register in
* intel_dp->DP because link_down must not change that (otherwise link
* re-training will fail. */
dpa_ctl &= ~DP_PLL_ENABLE;
I915_WRITE(DP_A, dpa_ctl);
POSTING_READ(DP_A);
udelay(200);
}
/* If the sink supports it, try to set the power state appropriately */
void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
{
int ret, i;
/* Should have a valid DPCD by this point */
if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
return;
if (mode != DRM_MODE_DPMS_ON) {
ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
DP_SET_POWER_D3);
} else {
/*
* When turning on, we need to retry for 1ms to give the sink
* time to wake up.
*/
for (i = 0; i < 3; i++) {
ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
DP_SET_POWER_D0);
if (ret == 1)
break;
msleep(1);
}
}
if (ret != 1)
DRM_DEBUG_KMS("failed to %s sink power state\n",
mode == DRM_MODE_DPMS_ON ? "enable" : "disable");
}
static bool intel_dp_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
enum port port = dp_to_dig_port(intel_dp)->port;
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
u32 tmp;
power_domain = intel_display_port_power_domain(encoder);
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
tmp = I915_READ(intel_dp->output_reg);
if (!(tmp & DP_PORT_EN))
return false;
if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
*pipe = PORT_TO_PIPE_CPT(tmp);
} else if (IS_CHERRYVIEW(dev)) {
*pipe = DP_PORT_TO_PIPE_CHV(tmp);
} else if (!HAS_PCH_CPT(dev) || port == PORT_A) {
*pipe = PORT_TO_PIPE(tmp);
} else {
u32 trans_sel;
u32 trans_dp;
int i;
switch (intel_dp->output_reg) {
case PCH_DP_B:
trans_sel = TRANS_DP_PORT_SEL_B;
break;
case PCH_DP_C:
trans_sel = TRANS_DP_PORT_SEL_C;
break;
case PCH_DP_D:
trans_sel = TRANS_DP_PORT_SEL_D;
break;
default:
return true;
}
for_each_pipe(dev_priv, i) {
trans_dp = I915_READ(TRANS_DP_CTL(i));
if ((trans_dp & TRANS_DP_PORT_SEL_MASK) == trans_sel) {
*pipe = i;
return true;
}
}
DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n",
intel_dp->output_reg);
}
return true;
}
static void intel_dp_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
u32 tmp, flags = 0;
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = dp_to_dig_port(intel_dp)->port;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
int dotclock;
tmp = I915_READ(intel_dp->output_reg);
if (tmp & DP_AUDIO_OUTPUT_ENABLE)
pipe_config->has_audio = true;
if ((port == PORT_A) || !HAS_PCH_CPT(dev)) {
if (tmp & DP_SYNC_HS_HIGH)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
if (tmp & DP_SYNC_VS_HIGH)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
} else {
tmp = I915_READ(TRANS_DP_CTL(crtc->pipe));
if (tmp & TRANS_DP_HSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
if (tmp & TRANS_DP_VSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
}
pipe_config->base.adjusted_mode.flags |= flags;
if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) &&
tmp & DP_COLOR_RANGE_16_235)
pipe_config->limited_color_range = true;
pipe_config->has_dp_encoder = true;
intel_dp_get_m_n(crtc, pipe_config);
if (port == PORT_A) {
if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ)
pipe_config->port_clock = 162000;
else
pipe_config->port_clock = 270000;
}
dotclock = intel_dotclock_calculate(pipe_config->port_clock,
&pipe_config->dp_m_n);
if (HAS_PCH_SPLIT(dev_priv->dev) && port != PORT_A)
ironlake_check_encoder_dotclock(pipe_config, dotclock);
pipe_config->base.adjusted_mode.crtc_clock = dotclock;
drm/i915/dp: workaround BIOS eDP bpp clamping issue This isn't a real fix to the problem, but rather a stopgap measure while trying to find a proper solution. There are several laptops out there that fail to light up the eDP panel in UEFI boot mode. They seem to be mostly IVB machines, including but apparently not limited to Dell XPS 13, Asus TX300, Asus UX31A, Asus UX32VD, Acer Aspire S7. They seem to work in CSM or legacy boot. The difference between UEFI and CSM is that the BIOS provides a different VBT to the kernel. The UEFI VBT typically specifies 18 bpp and 1.62 GHz link for eDP, while CSM VBT has 24 bpp and 2.7 GHz link. We end up clamping to 18 bpp in UEFI mode, which we can fit in the 1.62 Ghz link, and for reasons yet unknown fail to light up the panel. Dithering from 24 to 18 bpp itself seems to work; if we use 18 bpp with 2.7 GHz link, the eDP panel lights up. So essentially this is a link speed issue, and *not* a bpp clamping issue. The bug raised its head since commit 657445fe8660100ad174600ebfa61536392b7624 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat May 4 10:09:18 2013 +0200 Revert "drm/i915: revert eDP bpp clamping code changes" which started clamping bpp *before* computing the link requirements, and thus affecting the required bandwidth. Clamping after the computations kept the link at 2.7 GHz. Even though the BIOS tells us to use 18 bpp through the VBT, it happily boots up at 24 bpp and 2.7 GHz itself! Use this information to selectively ignore the VBT provided value. We can't ignore the VBT eDP bpp altogether, as there are other laptops that do require the clamping to be used due to EDID reporting higher bpp than the panel can support. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59841 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67950 Tested-by: Ulf Winkelvos <ulf@winkelvos.de> Tested-by: jkp <jkp@iki.fi> CC: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-21 15:52:07 +08:00
if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
/*
* This is a big fat ugly hack.
*
* Some machines in UEFI boot mode provide us a VBT that has 18
* bpp and 1.62 GHz link bandwidth for eDP, which for reasons
* unknown we fail to light up. Yet the same BIOS boots up with
* 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
* max, not what it tells us to use.
*
* Note: This will still be broken if the eDP panel is not lit
* up by the BIOS, and thus we can't get the mode at module
* load.
*/
DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
}
}
drm/i915/dp: convert to encoder disable/enable DP is the first encoder which isn't simple. As commit d240f20f545fa4ed78ce48d1eb62ab529f2b1467 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Aug 13 15:43:26 2010 -0700 drm/i915: make sure eDP PLL is enabled at the right time discovered, we need to enable the eDP PLL for the cpu port _before_ we enable the pipes and planes. After a few more commits the current solution is to enable the PLL in the dp mode_set function (because this is the only encoder callback the crtc helper code calls before it calls the crtc's commit function). Now I suspect that we actually should enable/disable the entire cpu eDP port before/after planes, but thanks to how the crtc helper code assumes that you can disable an encoder without disabling it's crtc right away, this won't work. The result is that the current prepare/commit hooks don't touch the eDP PLL, but instead it get's frobbed in dp_mode_set and in the dp dpms function. Hence we need to keep things (at least for now) bug-for-bug compatible by using our own special dp dpms function and keep everything else more-or-less as-is (just using our own infrastrucutre now). This mess can only be cleaned up once we control the entire modeset sequence and can move things around freely. v2: Squash unsupported dpms modes to OFF at the beginning of the DP dpms function. v3: Need to set the dpms state to off in dp_disable, otherwise this breaks the newly added WARNs ... v4: Rebased against edp panel off sequence changes in 3.6-rc2 Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-01 19:05:48 +08:00
static void intel_disable_dp(struct intel_encoder *encoder)
{
drm/i915/dp: convert to encoder disable/enable DP is the first encoder which isn't simple. As commit d240f20f545fa4ed78ce48d1eb62ab529f2b1467 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Aug 13 15:43:26 2010 -0700 drm/i915: make sure eDP PLL is enabled at the right time discovered, we need to enable the eDP PLL for the cpu port _before_ we enable the pipes and planes. After a few more commits the current solution is to enable the PLL in the dp mode_set function (because this is the only encoder callback the crtc helper code calls before it calls the crtc's commit function). Now I suspect that we actually should enable/disable the entire cpu eDP port before/after planes, but thanks to how the crtc helper code assumes that you can disable an encoder without disabling it's crtc right away, this won't work. The result is that the current prepare/commit hooks don't touch the eDP PLL, but instead it get's frobbed in dp_mode_set and in the dp dpms function. Hence we need to keep things (at least for now) bug-for-bug compatible by using our own special dp dpms function and keep everything else more-or-less as-is (just using our own infrastrucutre now). This mess can only be cleaned up once we control the entire modeset sequence and can move things around freely. v2: Squash unsupported dpms modes to OFF at the beginning of the DP dpms function. v3: Need to set the dpms state to off in dp_disable, otherwise this breaks the newly added WARNs ... v4: Rebased against edp panel off sequence changes in 3.6-rc2 Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-01 19:05:48 +08:00
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
if (crtc->config->has_audio)
intel_audio_codec_disable(encoder);
if (HAS_PSR(dev) && !HAS_DDI(dev))
intel_psr_disable(intel_dp);
/* Make sure the panel is off before trying to change the mode. But also
* ensure that we have vdd while we switch off the panel. */
drm/i915: finish off reverting eDP VDD changes This is a small follow-up fix to the series of eDP VDD back and forth we've had recently. This is effectively a combined revert of three commits: commit 2c2894f698fffd8ff53e1e1d3834f9e1035b1f39 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Mar 7 20:05:20 2014 -0300 drm/i915: properly disable the VDD when disabling the panel commit b3064154dfd37deb386b1e459c54e1ca2460b3d5 Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Date: Tue Mar 4 00:42:44 2014 +0100 drm/i915: Don't just say it, actually force edp vdd commit dff392dbd258381a6c3164f38420593f2d291e3b Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Dec 6 17:32:41 2013 -0200 drm/i915: don't touch the VDD when disabling the panel which shows that we're pretty close back to where we started already. The first two were basically reverting the last, but missing the WARN. Add that back. We also OCD the intel_ prefix back to intel_edp_panel_vdd_on() which was lost somewhere in between. The circle closes. For future reference, "drm/i915: don't touch the VDD when disabling the panel" failed to take into account commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel and commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Aug 12 22:17:14 2012 +0200 drm/i915: reorder edp disabling to fix ivb MacBook Air Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-17 22:43:36 +08:00
intel_edp_panel_vdd_on(intel_dp);
intel_edp_backlight_off(intel_dp);
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
intel_edp_panel_off(intel_dp);
/* disable the port before the pipe on g4x */
if (INTEL_INFO(dev)->gen < 5)
intel_dp_link_down(intel_dp);
}
static void ilk_post_disable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
enum port port = dp_to_dig_port(intel_dp)->port;
intel_dp_link_down(intel_dp);
if (port == PORT_A)
ironlake_edp_pll_off(intel_dp);
}
static void vlv_post_disable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
intel_dp_link_down(intel_dp);
}
static void chv_post_disable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
enum dpio_channel ch = vlv_dport_to_channel(dport);
enum pipe pipe = intel_crtc->pipe;
u32 val;
intel_dp_link_down(intel_dp);
mutex_lock(&dev_priv->dpio_lock);
/* Propagate soft reset to data lane reset */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
val |= CHV_PCS_REQ_SOFTRESET_EN;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
val |= CHV_PCS_REQ_SOFTRESET_EN;
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
mutex_unlock(&dev_priv->dpio_lock);
}
static void
_intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t *DP,
uint8_t dp_train_pat)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_dig_port->port;
if (HAS_DDI(dev)) {
uint32_t temp = I915_READ(DP_TP_CTL(port));
if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
else
temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE;
temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
case DP_TRAINING_PATTERN_DISABLE:
temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
break;
case DP_TRAINING_PATTERN_1:
temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
break;
case DP_TRAINING_PATTERN_2:
temp |= DP_TP_CTL_LINK_TRAIN_PAT2;
break;
case DP_TRAINING_PATTERN_3:
temp |= DP_TP_CTL_LINK_TRAIN_PAT3;
break;
}
I915_WRITE(DP_TP_CTL(port), temp);
} else if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) {
*DP &= ~DP_LINK_TRAIN_MASK_CPT;
switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
case DP_TRAINING_PATTERN_DISABLE:
*DP |= DP_LINK_TRAIN_OFF_CPT;
break;
case DP_TRAINING_PATTERN_1:
*DP |= DP_LINK_TRAIN_PAT_1_CPT;
break;
case DP_TRAINING_PATTERN_2:
*DP |= DP_LINK_TRAIN_PAT_2_CPT;
break;
case DP_TRAINING_PATTERN_3:
DRM_ERROR("DP training pattern 3 not supported\n");
*DP |= DP_LINK_TRAIN_PAT_2_CPT;
break;
}
} else {
if (IS_CHERRYVIEW(dev))
*DP &= ~DP_LINK_TRAIN_MASK_CHV;
else
*DP &= ~DP_LINK_TRAIN_MASK;
switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
case DP_TRAINING_PATTERN_DISABLE:
*DP |= DP_LINK_TRAIN_OFF;
break;
case DP_TRAINING_PATTERN_1:
*DP |= DP_LINK_TRAIN_PAT_1;
break;
case DP_TRAINING_PATTERN_2:
*DP |= DP_LINK_TRAIN_PAT_2;
break;
case DP_TRAINING_PATTERN_3:
if (IS_CHERRYVIEW(dev)) {
*DP |= DP_LINK_TRAIN_PAT_3_CHV;
} else {
DRM_ERROR("DP training pattern 3 not supported\n");
*DP |= DP_LINK_TRAIN_PAT_2;
}
break;
}
}
}
static void intel_dp_enable_port(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
/* enable with pattern 1 (as per spec) */
_intel_dp_set_link_train(intel_dp, &intel_dp->DP,
DP_TRAINING_PATTERN_1);
I915_WRITE(intel_dp->output_reg, intel_dp->DP);
POSTING_READ(intel_dp->output_reg);
/*
* Magic for VLV/CHV. We _must_ first set up the register
* without actually enabling the port, and then do another
* write to enable the port. Otherwise link training will
* fail when the power sequencer is freshly used for this port.
*/
intel_dp->DP |= DP_PORT_EN;
I915_WRITE(intel_dp->output_reg, intel_dp->DP);
POSTING_READ(intel_dp->output_reg);
}
drm/i915/dp: convert to encoder disable/enable DP is the first encoder which isn't simple. As commit d240f20f545fa4ed78ce48d1eb62ab529f2b1467 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Aug 13 15:43:26 2010 -0700 drm/i915: make sure eDP PLL is enabled at the right time discovered, we need to enable the eDP PLL for the cpu port _before_ we enable the pipes and planes. After a few more commits the current solution is to enable the PLL in the dp mode_set function (because this is the only encoder callback the crtc helper code calls before it calls the crtc's commit function). Now I suspect that we actually should enable/disable the entire cpu eDP port before/after planes, but thanks to how the crtc helper code assumes that you can disable an encoder without disabling it's crtc right away, this won't work. The result is that the current prepare/commit hooks don't touch the eDP PLL, but instead it get's frobbed in dp_mode_set and in the dp dpms function. Hence we need to keep things (at least for now) bug-for-bug compatible by using our own special dp dpms function and keep everything else more-or-less as-is (just using our own infrastrucutre now). This mess can only be cleaned up once we control the entire modeset sequence and can move things around freely. v2: Squash unsupported dpms modes to OFF at the beginning of the DP dpms function. v3: Need to set the dpms state to off in dp_disable, otherwise this breaks the newly added WARNs ... v4: Rebased against edp panel off sequence changes in 3.6-rc2 Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-01 19:05:48 +08:00
static void intel_enable_dp(struct intel_encoder *encoder)
{
drm/i915/dp: convert to encoder disable/enable DP is the first encoder which isn't simple. As commit d240f20f545fa4ed78ce48d1eb62ab529f2b1467 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Aug 13 15:43:26 2010 -0700 drm/i915: make sure eDP PLL is enabled at the right time discovered, we need to enable the eDP PLL for the cpu port _before_ we enable the pipes and planes. After a few more commits the current solution is to enable the PLL in the dp mode_set function (because this is the only encoder callback the crtc helper code calls before it calls the crtc's commit function). Now I suspect that we actually should enable/disable the entire cpu eDP port before/after planes, but thanks to how the crtc helper code assumes that you can disable an encoder without disabling it's crtc right away, this won't work. The result is that the current prepare/commit hooks don't touch the eDP PLL, but instead it get's frobbed in dp_mode_set and in the dp dpms function. Hence we need to keep things (at least for now) bug-for-bug compatible by using our own special dp dpms function and keep everything else more-or-less as-is (just using our own infrastrucutre now). This mess can only be cleaned up once we control the entire modeset sequence and can move things around freely. v2: Squash unsupported dpms modes to OFF at the beginning of the DP dpms function. v3: Need to set the dpms state to off in dp_disable, otherwise this breaks the newly added WARNs ... v4: Rebased against edp panel off sequence changes in 3.6-rc2 Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-01 19:05:48 +08:00
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
drm/i915/dp: convert to encoder disable/enable DP is the first encoder which isn't simple. As commit d240f20f545fa4ed78ce48d1eb62ab529f2b1467 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Aug 13 15:43:26 2010 -0700 drm/i915: make sure eDP PLL is enabled at the right time discovered, we need to enable the eDP PLL for the cpu port _before_ we enable the pipes and planes. After a few more commits the current solution is to enable the PLL in the dp mode_set function (because this is the only encoder callback the crtc helper code calls before it calls the crtc's commit function). Now I suspect that we actually should enable/disable the entire cpu eDP port before/after planes, but thanks to how the crtc helper code assumes that you can disable an encoder without disabling it's crtc right away, this won't work. The result is that the current prepare/commit hooks don't touch the eDP PLL, but instead it get's frobbed in dp_mode_set and in the dp dpms function. Hence we need to keep things (at least for now) bug-for-bug compatible by using our own special dp dpms function and keep everything else more-or-less as-is (just using our own infrastrucutre now). This mess can only be cleaned up once we control the entire modeset sequence and can move things around freely. v2: Squash unsupported dpms modes to OFF at the beginning of the DP dpms function. v3: Need to set the dpms state to off in dp_disable, otherwise this breaks the newly added WARNs ... v4: Rebased against edp panel off sequence changes in 3.6-rc2 Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-01 19:05:48 +08:00
uint32_t dp_reg = I915_READ(intel_dp->output_reg);
if (WARN_ON(dp_reg & DP_PORT_EN))
return;
pps_lock(intel_dp);
if (IS_VALLEYVIEW(dev))
vlv_init_panel_power_sequencer(intel_dp);
intel_dp_enable_port(intel_dp);
edp_panel_vdd_on(intel_dp);
edp_panel_on(intel_dp);
edp_panel_vdd_off(intel_dp, true);
pps_unlock(intel_dp);
if (IS_VALLEYVIEW(dev))
vlv_wait_port_ready(dev_priv, dp_to_dig_port(intel_dp));
drm/i915: Correct eDP panel power sequencing delay computations Store the panel power sequencing delays in the dp private structure, rather than the global device structure. Who knows, maybe we'll get more than one eDP device in the future. From the eDP spec, we need the following numbers: T1 + T3 Power on to Aux Channel operation (panel_power_up_delay) This marks how long it takes the panel to boot up and get ready to receive aux channel communications. T8 Video signal to backlight on (backlight_on_delay) Once a valid video signal is being sent to the device, it can take a while before the panel is actuall showing useful data. This delay allows the panel to get something reasonable up before the backlight is turned on. T9 Backlight off to video off (backlight_off_delay) Turning the backlight off can take a moment, so this delay makes sure there is still valid video data on the screen. T10 Video off to power off (panel_power_down_delay) Presumably this delay allows the panel to perform an orderly shutdown of the display. T11 + T12 Power off to power on (panel_power_cycle_delay) So, once you turn the panel off, you have to wait a while before you can turn it back on. This delay is usually the longest in the entire sequence. Neither the VBIOS source code nor the hardware documentation has a clear mapping between the delay values they provide and those required by the eDP spec. The VBIOS code actually uses two different labels for the delay values in the five words of the relevant VBT table. **** MORE LATER *** Look at both the current hardware register settings and the VBT specified panel power sequencing timings. Use the maximum of the two delays, to make sure things work reliably. If there is no VBT data, then those values will be initialized to zero, so we'll just use the values as programmed in the hardware. Note that the BIOS just fetches delays from the VBT table to place in the hardware registers, so we should get the same values from both places, except for rounding. VBT doesn't provide any values for T1 or T2, so we'll always just use the hardware value for that. The panel power up delay is thus T1 + T2 + T3, which should be sufficient in all cases. The panel power down delay is T1 + T2 + T12, using T1+T2 as a proxy for T11, which isn't available anywhere. For the backlight delays, the eDP spec says T6 + T8 is the delay from the end of link training to backlight on and T9 is the delay from backlight off until video off. The hardware provides a 'backlight on' delay, which I'm taking to be T6 + T8 while the VBT provides something called 'T7', which I'm assuming is s On the macbook air I'm testing with, this yields a power-up delay of over 200ms and a power-down delay of over 600ms. It all works now, but we're frobbing these power controls several times during mode setting, making the whole process take an awfully long time. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-29 07:48:10 +08:00
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-03 17:57:41 +08:00
intel_dp_stop_link_train(intel_dp);
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
if (crtc->config->has_audio) {
DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
pipe_name(crtc->pipe));
intel_audio_codec_enable(encoder);
}
}
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
static void g4x_enable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
intel_enable_dp(encoder);
intel_edp_backlight_on(intel_dp);
}
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
static void vlv_enable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
intel_edp_backlight_on(intel_dp);
intel_psr_enable(intel_dp);
}
static void g4x_pre_enable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
intel_dp_prepare(encoder);
/* Only ilk+ has port A */
if (dport->port == PORT_A) {
ironlake_set_pll_cpu_edp(intel_dp);
ironlake_edp_pll_on(intel_dp);
}
}
static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = intel_dig_port->base.base.dev->dev_private;
enum pipe pipe = intel_dp->pps_pipe;
int pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
edp_panel_vdd_off_sync(intel_dp);
/*
* VLV seems to get confused when multiple power seqeuencers
* have the same port selected (even if only one has power/vdd
* enabled). The failure manifests as vlv_wait_port_ready() failing
* CHV on the other hand doesn't seem to mind having the same port
* selected in multiple power seqeuencers, but let's clear the
* port select always when logically disconnecting a power sequencer
* from a port.
*/
DRM_DEBUG_KMS("detaching pipe %c power sequencer from port %c\n",
pipe_name(pipe), port_name(intel_dig_port->port));
I915_WRITE(pp_on_reg, 0);
POSTING_READ(pp_on_reg);
intel_dp->pps_pipe = INVALID_PIPE;
}
static void vlv_steal_power_sequencer(struct drm_device *dev,
enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *encoder;
lockdep_assert_held(&dev_priv->pps_mutex);
if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B))
return;
list_for_each_entry(encoder, &dev->mode_config.encoder_list,
base.head) {
struct intel_dp *intel_dp;
enum port port;
if (encoder->type != INTEL_OUTPUT_EDP)
continue;
intel_dp = enc_to_intel_dp(&encoder->base);
port = dp_to_dig_port(intel_dp)->port;
if (intel_dp->pps_pipe != pipe)
continue;
DRM_DEBUG_KMS("stealing pipe %c power sequencer from port %c\n",
pipe_name(pipe), port_name(port));
WARN(encoder->connectors_active,
"stealing pipe %c power sequencer from active eDP port %c\n",
pipe_name(pipe), port_name(port));
/* make sure vdd is off before we steal it */
vlv_detach_power_sequencer(intel_dp);
}
}
static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *encoder = &intel_dig_port->base;
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
lockdep_assert_held(&dev_priv->pps_mutex);
if (!is_edp(intel_dp))
return;
if (intel_dp->pps_pipe == crtc->pipe)
return;
/*
* If another power sequencer was being used on this
* port previously make sure to turn off vdd there while
* we still have control of it.
*/
if (intel_dp->pps_pipe != INVALID_PIPE)
vlv_detach_power_sequencer(intel_dp);
/*
* We may be stealing the power
* sequencer from another port.
*/
vlv_steal_power_sequencer(dev, crtc->pipe);
/* now it's all ours */
intel_dp->pps_pipe = crtc->pipe;
DRM_DEBUG_KMS("initializing pipe %c power sequencer for port %c\n",
pipe_name(intel_dp->pps_pipe), port_name(intel_dig_port->port));
/* init power sequencer on this pipe and port */
intel_dp_init_panel_power_sequencer(dev, intel_dp);
intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
}
static void vlv_pre_enable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
struct drm_device *dev = encoder->base.dev;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
u32 val;
mutex_lock(&dev_priv->dpio_lock);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port));
val = 0;
if (pipe)
val |= (1<<21);
else
val &= ~(1<<21);
val |= 0x001000c4;
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
mutex_unlock(&dev_priv->dpio_lock);
intel_enable_dp(encoder);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
}
static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
{
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
intel_dp_prepare(encoder);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
/* Program Tx lane resets to default */
mutex_lock(&dev_priv->dpio_lock);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
DPIO_PCS_TX_LANE2_RESET |
DPIO_PCS_TX_LANE1_RESET);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 05:51:36 +08:00
DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
(1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
DPIO_PCS_CLK_SOFT_RESET);
/* Fix up inter-pair skew failure */
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
mutex_unlock(&dev_priv->dpio_lock);
}
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
static void chv_pre_enable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
enum dpio_channel ch = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
int data, i;
u32 val;
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
mutex_lock(&dev_priv->dpio_lock);
/* allow hardware to manage TX FIFO reset source */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
/* Deassert soft data lane reset*/
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
val |= CHV_PCS_REQ_SOFTRESET_EN;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
val |= CHV_PCS_REQ_SOFTRESET_EN;
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
/* Program Tx lane latency optimal setting*/
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
for (i = 0; i < 4; i++) {
/* Set the latency optimal bit */
data = (i == 1) ? 0x0 : 0x6;
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW11(ch, i),
data << DPIO_FRC_LATENCY_SHFIT);
/* Set the upar bit */
data = (i == 1) ? 0x0 : 0x1;
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
data << DPIO_UPAR_SHIFT);
}
/* Data lane stagger programming */
/* FIXME: Fix up value only after power analysis */
mutex_unlock(&dev_priv->dpio_lock);
intel_enable_dp(encoder);
}
static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
{
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
enum dpio_channel ch = vlv_dport_to_channel(dport);
enum pipe pipe = intel_crtc->pipe;
u32 val;
intel_dp_prepare(encoder);
mutex_lock(&dev_priv->dpio_lock);
/* program left/right clock distribution */
if (pipe != PIPE_B) {
val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
if (ch == DPIO_CH0)
val |= CHV_BUFLEFTENA1_FORCE;
if (ch == DPIO_CH1)
val |= CHV_BUFRIGHTENA1_FORCE;
vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
} else {
val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
if (ch == DPIO_CH0)
val |= CHV_BUFLEFTENA2_FORCE;
if (ch == DPIO_CH1)
val |= CHV_BUFRIGHTENA2_FORCE;
vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
}
/* program clock channel usage */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
if (pipe != PIPE_B)
val &= ~CHV_PCS_USEDCLKCHANNEL;
else
val |= CHV_PCS_USEDCLKCHANNEL;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
if (pipe != PIPE_B)
val &= ~CHV_PCS_USEDCLKCHANNEL;
else
val |= CHV_PCS_USEDCLKCHANNEL;
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
/*
* This a a bit weird since generally CL
* matches the pipe, but here we need to
* pick the CL based on the port.
*/
val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
if (pipe != PIPE_B)
val &= ~CHV_CMN_USEDCLKCHANNEL;
else
val |= CHV_CMN_USEDCLKCHANNEL;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
mutex_unlock(&dev_priv->dpio_lock);
}
/*
* Native read with retry for link status and receiver capability reads for
* cases where the sink may still be asleep.
*
* Sinks are *supposed* to come up within 1ms from an off state, but we're also
* supposed to retry 3 times per the spec.
*/
static ssize_t
intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
void *buffer, size_t size)
{
ssize_t ret;
int i;
/*
* Sometime we just get the same incorrect byte repeated
* over the entire buffer. Doing just one throw away read
* initially seems to "solve" it.
*/
drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);
for (i = 0; i < 3; i++) {
ret = drm_dp_dpcd_read(aux, offset, buffer, size);
if (ret == size)
return ret;
msleep(1);
}
return ret;
}
/*
* Fetch AUX CH registers 0x202 - 0x207 which contain
* link status information
*/
static bool
intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
{
return intel_dp_dpcd_read_wake(&intel_dp->aux,
DP_LANE0_1_STATUS,
link_status,
DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
}
/* These are source-specific values. */
static uint8_t
intel_dp_voltage_max(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
enum port port = dp_to_dig_port(intel_dp)->port;
if (INTEL_INFO(dev)->gen >= 9)
return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
else if (IS_VALLEYVIEW(dev))
return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
else if (IS_GEN7(dev) && port == PORT_A)
return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
else if (HAS_PCH_CPT(dev) && port != PORT_A)
return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
else
return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
}
static uint8_t
intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
enum port port = dp_to_dig_port(intel_dp)->port;
if (INTEL_INFO(dev)->gen >= 9) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
return DP_TRAIN_PRE_EMPH_LEVEL_3;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
return DP_TRAIN_PRE_EMPH_LEVEL_2;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
return DP_TRAIN_PRE_EMPH_LEVEL_1;
default:
return DP_TRAIN_PRE_EMPH_LEVEL_0;
}
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
return DP_TRAIN_PRE_EMPH_LEVEL_3;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
return DP_TRAIN_PRE_EMPH_LEVEL_2;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
return DP_TRAIN_PRE_EMPH_LEVEL_1;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
default:
return DP_TRAIN_PRE_EMPH_LEVEL_0;
}
} else if (IS_VALLEYVIEW(dev)) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
return DP_TRAIN_PRE_EMPH_LEVEL_3;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
return DP_TRAIN_PRE_EMPH_LEVEL_2;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
return DP_TRAIN_PRE_EMPH_LEVEL_1;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
default:
return DP_TRAIN_PRE_EMPH_LEVEL_0;
}
} else if (IS_GEN7(dev) && port == PORT_A) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
return DP_TRAIN_PRE_EMPH_LEVEL_2;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
return DP_TRAIN_PRE_EMPH_LEVEL_1;
default:
return DP_TRAIN_PRE_EMPH_LEVEL_0;
}
} else {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
return DP_TRAIN_PRE_EMPH_LEVEL_2;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
return DP_TRAIN_PRE_EMPH_LEVEL_2;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
return DP_TRAIN_PRE_EMPH_LEVEL_1;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
default:
return DP_TRAIN_PRE_EMPH_LEVEL_0;
}
}
}
static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
struct intel_crtc *intel_crtc =
to_intel_crtc(dport->base.base.crtc);
unsigned long demph_reg_value, preemph_reg_value,
uniqtranscale_reg_value;
uint8_t train_set = intel_dp->train_set[0];
enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPH_LEVEL_0:
preemph_reg_value = 0x0004000;
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
demph_reg_value = 0x2B405555;
uniqtranscale_reg_value = 0x552AB83A;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
demph_reg_value = 0x2B404040;
uniqtranscale_reg_value = 0x5548B83A;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
demph_reg_value = 0x2B245555;
uniqtranscale_reg_value = 0x5560B83A;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
demph_reg_value = 0x2B405555;
uniqtranscale_reg_value = 0x5598DA3A;
break;
default:
return 0;
}
break;
case DP_TRAIN_PRE_EMPH_LEVEL_1:
preemph_reg_value = 0x0002000;
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
demph_reg_value = 0x2B404040;
uniqtranscale_reg_value = 0x5552B83A;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
demph_reg_value = 0x2B404848;
uniqtranscale_reg_value = 0x5580B83A;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
demph_reg_value = 0x2B404040;
uniqtranscale_reg_value = 0x55ADDA3A;
break;
default:
return 0;
}
break;
case DP_TRAIN_PRE_EMPH_LEVEL_2:
preemph_reg_value = 0x0000000;
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
demph_reg_value = 0x2B305555;
uniqtranscale_reg_value = 0x5570B83A;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
demph_reg_value = 0x2B2B4040;
uniqtranscale_reg_value = 0x55ADDA3A;
break;
default:
return 0;
}
break;
case DP_TRAIN_PRE_EMPH_LEVEL_3:
preemph_reg_value = 0x0006000;
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
demph_reg_value = 0x1B405555;
uniqtranscale_reg_value = 0x55ADDA3A;
break;
default:
return 0;
}
break;
default:
return 0;
}
mutex_lock(&dev_priv->dpio_lock);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
uniqtranscale_reg_value);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x80000000);
mutex_unlock(&dev_priv->dpio_lock);
return 0;
}
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
u32 deemph_reg_value, margin_reg_value, val;
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
uint8_t train_set = intel_dp->train_set[0];
enum dpio_channel ch = vlv_dport_to_channel(dport);
enum pipe pipe = intel_crtc->pipe;
int i;
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPH_LEVEL_0:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 128;
margin_reg_value = 52;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 128;
margin_reg_value = 77;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 128;
margin_reg_value = 102;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 128;
margin_reg_value = 154;
/* FIXME extra to set for 1200 */
break;
default:
return 0;
}
break;
case DP_TRAIN_PRE_EMPH_LEVEL_1:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 85;
margin_reg_value = 78;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 85;
margin_reg_value = 116;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 85;
margin_reg_value = 154;
break;
default:
return 0;
}
break;
case DP_TRAIN_PRE_EMPH_LEVEL_2:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 64;
margin_reg_value = 104;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 64;
margin_reg_value = 154;
break;
default:
return 0;
}
break;
case DP_TRAIN_PRE_EMPH_LEVEL_3:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
deemph_reg_value = 43;
margin_reg_value = 154;
break;
default:
return 0;
}
break;
default:
return 0;
}
mutex_lock(&dev_priv->dpio_lock);
/* Clear calc init */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
/* Program swing deemph */
for (i = 0; i < 4; i++) {
val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
val &= ~DPIO_SWING_DEEMPH9P5_MASK;
val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
}
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
/* Program swing margin */
for (i = 0; i < 4; i++) {
val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
val &= ~DPIO_SWING_MARGIN000_MASK;
val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
}
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
/* Disable unique transition scale */
for (i = 0; i < 4; i++) {
val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
}
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
if (((train_set & DP_TRAIN_PRE_EMPHASIS_MASK)
== DP_TRAIN_PRE_EMPH_LEVEL_0) &&
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
((train_set & DP_TRAIN_VOLTAGE_SWING_MASK)
== DP_TRAIN_VOLTAGE_SWING_LEVEL_3)) {
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
/*
* The document said it needs to set bit 27 for ch0 and bit 26
* for ch1. Might be a typo in the doc.
* For now, for this unique transition scale selection, set bit
* 27 for ch0 and ch1.
*/
for (i = 0; i < 4; i++) {
val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
}
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
for (i = 0; i < 4; i++) {
val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
val |= (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT);
vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
}
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
}
/* Start swing calculation */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
/* LRC Bypass */
val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
val |= DPIO_LRC_BYPASS;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, val);
mutex_unlock(&dev_priv->dpio_lock);
return 0;
}
static void
intel_get_adjust_train(struct intel_dp *intel_dp,
const uint8_t link_status[DP_LINK_STATUS_SIZE])
{
uint8_t v = 0;
uint8_t p = 0;
int lane;
uint8_t voltage_max;
uint8_t preemph_max;
for (lane = 0; lane < intel_dp->lane_count; lane++) {
uint8_t this_v = drm_dp_get_adjust_request_voltage(link_status, lane);
uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane);
if (this_v > v)
v = this_v;
if (this_p > p)
p = this_p;
}
voltage_max = intel_dp_voltage_max(intel_dp);
if (v >= voltage_max)
v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
preemph_max = intel_dp_pre_emphasis_max(intel_dp, v);
if (p >= preemph_max)
p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
for (lane = 0; lane < 4; lane++)
intel_dp->train_set[lane] = v | p;
}
static uint32_t
intel_gen4_signal_levels(uint8_t train_set)
{
uint32_t signal_levels = 0;
switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
default:
signal_levels |= DP_VOLTAGE_0_4;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
signal_levels |= DP_VOLTAGE_0_6;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
signal_levels |= DP_VOLTAGE_0_8;
break;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
signal_levels |= DP_VOLTAGE_1_2;
break;
}
switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPH_LEVEL_0:
default:
signal_levels |= DP_PRE_EMPHASIS_0;
break;
case DP_TRAIN_PRE_EMPH_LEVEL_1:
signal_levels |= DP_PRE_EMPHASIS_3_5;
break;
case DP_TRAIN_PRE_EMPH_LEVEL_2:
signal_levels |= DP_PRE_EMPHASIS_6;
break;
case DP_TRAIN_PRE_EMPH_LEVEL_3:
signal_levels |= DP_PRE_EMPHASIS_9_5;
break;
}
return signal_levels;
}
/* Gen6's DP voltage swing and pre-emphasis control */
static uint32_t
intel_gen6_edp_signal_levels(uint8_t train_set)
{
int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
DP_TRAIN_PRE_EMPHASIS_MASK);
switch (signal_levels) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0:
return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B;
default:
DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
"0x%x\n", signal_levels);
return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
}
}
/* Gen7's DP voltage swing and pre-emphasis control */
static uint32_t
intel_gen7_edp_signal_levels(uint8_t train_set)
{
int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
DP_TRAIN_PRE_EMPHASIS_MASK);
switch (signal_levels) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
return EDP_LINK_TRAIN_400MV_0DB_IVB;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
return EDP_LINK_TRAIN_400MV_3_5DB_IVB;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
return EDP_LINK_TRAIN_400MV_6DB_IVB;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
return EDP_LINK_TRAIN_600MV_0DB_IVB;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
return EDP_LINK_TRAIN_600MV_3_5DB_IVB;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
return EDP_LINK_TRAIN_800MV_0DB_IVB;
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
return EDP_LINK_TRAIN_800MV_3_5DB_IVB;
default:
DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
"0x%x\n", signal_levels);
return EDP_LINK_TRAIN_500MV_0DB_IVB;
}
}
/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
static uint32_t
intel_hsw_signal_levels(uint8_t train_set)
{
int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
DP_TRAIN_PRE_EMPHASIS_MASK);
switch (signal_levels) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
return DDI_BUF_TRANS_SELECT(0);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
return DDI_BUF_TRANS_SELECT(1);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
return DDI_BUF_TRANS_SELECT(2);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3:
return DDI_BUF_TRANS_SELECT(3);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
return DDI_BUF_TRANS_SELECT(4);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
return DDI_BUF_TRANS_SELECT(5);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
return DDI_BUF_TRANS_SELECT(6);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
return DDI_BUF_TRANS_SELECT(7);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
return DDI_BUF_TRANS_SELECT(8);
default:
DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
"0x%x\n", signal_levels);
return DDI_BUF_TRANS_SELECT(0);
}
}
/* Properly updates "DP" with the correct signal levels. */
static void
intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum port port = intel_dig_port->port;
struct drm_device *dev = intel_dig_port->base.base.dev;
uint32_t signal_levels, mask;
uint8_t train_set = intel_dp->train_set[0];
if (IS_HASWELL(dev) || IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
signal_levels = intel_hsw_signal_levels(train_set);
mask = DDI_BUF_EMP_MASK;
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
} else if (IS_CHERRYVIEW(dev)) {
signal_levels = intel_chv_signal_levels(intel_dp);
mask = 0;
} else if (IS_VALLEYVIEW(dev)) {
signal_levels = intel_vlv_signal_levels(intel_dp);
mask = 0;
} else if (IS_GEN7(dev) && port == PORT_A) {
signal_levels = intel_gen7_edp_signal_levels(train_set);
mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
} else if (IS_GEN6(dev) && port == PORT_A) {
signal_levels = intel_gen6_edp_signal_levels(train_set);
mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
} else {
signal_levels = intel_gen4_signal_levels(train_set);
mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
}
DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels);
*DP = (*DP & ~mask) | signal_levels;
}
static bool
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t *DP,
uint8_t dp_train_pat)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint8_t buf[sizeof(intel_dp->train_set) + 1];
int ret, len;
_intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
I915_WRITE(intel_dp->output_reg, *DP);
POSTING_READ(intel_dp->output_reg);
buf[0] = dp_train_pat;
if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) ==
DP_TRAINING_PATTERN_DISABLE) {
/* don't write DP_TRAINING_LANEx_SET on disable */
len = 1;
} else {
/* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */
memcpy(buf + 1, intel_dp->train_set, intel_dp->lane_count);
len = intel_dp->lane_count + 1;
}
ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_PATTERN_SET,
buf, len);
return ret == len;
}
static bool
intel_dp_reset_link_train(struct intel_dp *intel_dp, uint32_t *DP,
uint8_t dp_train_pat)
{
memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
intel_dp_set_signal_levels(intel_dp, DP);
return intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
}
static bool
intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP,
const uint8_t link_status[DP_LINK_STATUS_SIZE])
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
intel_get_adjust_train(intel_dp, link_status);
intel_dp_set_signal_levels(intel_dp, DP);
I915_WRITE(intel_dp->output_reg, *DP);
POSTING_READ(intel_dp->output_reg);
ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
intel_dp->train_set, intel_dp->lane_count);
return ret == intel_dp->lane_count;
}
drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-03 17:57:41 +08:00
static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_dig_port->port;
uint32_t val;
if (!HAS_DDI(dev))
return;
val = I915_READ(DP_TP_CTL(port));
val &= ~DP_TP_CTL_LINK_TRAIN_MASK;
val |= DP_TP_CTL_LINK_TRAIN_IDLE;
I915_WRITE(DP_TP_CTL(port), val);
/*
* On PORT_A we can have only eDP in SST mode. There the only reason
* we need to set idle transmission mode is to work around a HW issue
* where we enable the pipe while not in idle link-training mode.
* In this case there is requirement to wait for a minimum number of
* idle patterns to be sent.
*/
if (port == PORT_A)
return;
if (wait_for((I915_READ(DP_TP_STATUS(port)) & DP_TP_STATUS_IDLE_DONE),
1))
DRM_ERROR("Timed out waiting for DP idle patterns\n");
}
/* Enable corresponding port and start training pattern 1 */
void
intel_dp_start_link_train(struct intel_dp *intel_dp)
{
struct drm_encoder *encoder = &dp_to_dig_port(intel_dp)->base.base;
struct drm_device *dev = encoder->dev;
int i;
uint8_t voltage;
int voltage_tries, loop_tries;
uint32_t DP = intel_dp->DP;
uint8_t link_config[2];
if (HAS_DDI(dev))
intel_ddi_prepare_link_retrain(encoder);
/* Write the link configuration data */
link_config[0] = intel_dp->link_bw;
link_config[1] = intel_dp->lane_count;
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
link_config[0] = 0;
link_config[1] = DP_SET_ANSI_8B10B;
drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
DP |= DP_PORT_EN;
/* clock recovery */
if (!intel_dp_reset_link_train(intel_dp, &DP,
DP_TRAINING_PATTERN_1 |
DP_LINK_SCRAMBLING_DISABLE)) {
DRM_ERROR("failed to enable link training\n");
return;
}
voltage = 0xff;
voltage_tries = 0;
loop_tries = 0;
for (;;) {
uint8_t link_status[DP_LINK_STATUS_SIZE];
drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
if (!intel_dp_get_link_status(intel_dp, link_status)) {
DRM_ERROR("failed to get link status\n");
break;
}
if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
DRM_DEBUG_KMS("clock recovery OK\n");
break;
}
/* Check to see if we've tried the max voltage */
for (i = 0; i < intel_dp->lane_count; i++)
if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
if (i == intel_dp->lane_count) {
++loop_tries;
if (loop_tries == 5) {
DRM_ERROR("too many full retries, give up\n");
break;
}
intel_dp_reset_link_train(intel_dp, &DP,
DP_TRAINING_PATTERN_1 |
DP_LINK_SCRAMBLING_DISABLE);
voltage_tries = 0;
continue;
}
/* Check to see if we've tried the same voltage 5 times */
if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
++voltage_tries;
if (voltage_tries == 5) {
DRM_ERROR("too many voltage retries, give up\n");
break;
}
} else
voltage_tries = 0;
voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
/* Update training set as requested by target */
if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) {
DRM_ERROR("failed to update link training\n");
break;
}
}
intel_dp->DP = DP;
}
void
intel_dp_complete_link_train(struct intel_dp *intel_dp)
{
bool channel_eq = false;
int tries, cr_tries;
uint32_t DP = intel_dp->DP;
uint32_t training_pattern = DP_TRAINING_PATTERN_2;
/* Training Pattern 3 for HBR2 ot 1.2 devices that support it*/
if (intel_dp->link_bw == DP_LINK_BW_5_4 || intel_dp->use_tps3)
training_pattern = DP_TRAINING_PATTERN_3;
/* channel equalization */
if (!intel_dp_set_link_train(intel_dp, &DP,
training_pattern |
DP_LINK_SCRAMBLING_DISABLE)) {
DRM_ERROR("failed to start channel equalization\n");
return;
}
tries = 0;
cr_tries = 0;
channel_eq = false;
for (;;) {
uint8_t link_status[DP_LINK_STATUS_SIZE];
if (cr_tries > 5) {
DRM_ERROR("failed to train DP, aborting\n");
break;
}
drm_dp_link_train_channel_eq_delay(intel_dp->dpcd);
if (!intel_dp_get_link_status(intel_dp, link_status)) {
DRM_ERROR("failed to get link status\n");
break;
}
/* Make sure clock is still ok */
if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
intel_dp_start_link_train(intel_dp);
intel_dp_set_link_train(intel_dp, &DP,
training_pattern |
DP_LINK_SCRAMBLING_DISABLE);
cr_tries++;
continue;
}
if (drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
channel_eq = true;
break;
}
/* Try 5 times, then try clock recovery if that fails */
if (tries > 5) {
intel_dp_start_link_train(intel_dp);
intel_dp_set_link_train(intel_dp, &DP,
training_pattern |
DP_LINK_SCRAMBLING_DISABLE);
tries = 0;
cr_tries++;
continue;
}
/* Update training set as requested by target */
if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) {
DRM_ERROR("failed to update link training\n");
break;
}
++tries;
}
drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-03 17:57:41 +08:00
intel_dp_set_idle_link_train(intel_dp);
intel_dp->DP = DP;
if (channel_eq)
DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-03 17:57:41 +08:00
}
void intel_dp_stop_link_train(struct intel_dp *intel_dp)
{
intel_dp_set_link_train(intel_dp, &intel_dp->DP,
drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-03 17:57:41 +08:00
DP_TRAINING_PATTERN_DISABLE);
}
static void
intel_dp_link_down(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum port port = intel_dig_port->port;
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(intel_dig_port->base.base.crtc);
uint32_t DP = intel_dp->DP;
if (WARN_ON(HAS_DDI(dev)))
return;
if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
return;
DRM_DEBUG_KMS("\n");
if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) {
DP &= ~DP_LINK_TRAIN_MASK_CPT;
I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
} else {
if (IS_CHERRYVIEW(dev))
DP &= ~DP_LINK_TRAIN_MASK_CHV;
else
DP &= ~DP_LINK_TRAIN_MASK;
I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
}
POSTING_READ(intel_dp->output_reg);
if (HAS_PCH_IBX(dev) &&
I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
/* Hardware workaround: leaving our transcoder select
* set to transcoder B while it's off will prevent the
* corresponding HDMI output on transcoder A.
*
* Combine this with another hardware workaround:
* transcoder select bit can only be cleared while the
* port is enabled.
*/
DP &= ~DP_PIPEB_SELECT;
I915_WRITE(intel_dp->output_reg, DP);
/* Changes to enable or select take place the vblank
* after being written.
*/
if (WARN_ON(crtc == NULL)) {
/* We should never try to disable a port without a crtc
* attached. For paranoia keep the code around for a
* bit. */
POSTING_READ(intel_dp->output_reg);
msleep(50);
} else
intel_wait_for_vblank(dev, intel_crtc->pipe);
}
DP &= ~DP_AUDIO_OUTPUT_ENABLE;
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
drm/i915: Correct eDP panel power sequencing delay computations Store the panel power sequencing delays in the dp private structure, rather than the global device structure. Who knows, maybe we'll get more than one eDP device in the future. From the eDP spec, we need the following numbers: T1 + T3 Power on to Aux Channel operation (panel_power_up_delay) This marks how long it takes the panel to boot up and get ready to receive aux channel communications. T8 Video signal to backlight on (backlight_on_delay) Once a valid video signal is being sent to the device, it can take a while before the panel is actuall showing useful data. This delay allows the panel to get something reasonable up before the backlight is turned on. T9 Backlight off to video off (backlight_off_delay) Turning the backlight off can take a moment, so this delay makes sure there is still valid video data on the screen. T10 Video off to power off (panel_power_down_delay) Presumably this delay allows the panel to perform an orderly shutdown of the display. T11 + T12 Power off to power on (panel_power_cycle_delay) So, once you turn the panel off, you have to wait a while before you can turn it back on. This delay is usually the longest in the entire sequence. Neither the VBIOS source code nor the hardware documentation has a clear mapping between the delay values they provide and those required by the eDP spec. The VBIOS code actually uses two different labels for the delay values in the five words of the relevant VBT table. **** MORE LATER *** Look at both the current hardware register settings and the VBT specified panel power sequencing timings. Use the maximum of the two delays, to make sure things work reliably. If there is no VBT data, then those values will be initialized to zero, so we'll just use the values as programmed in the hardware. Note that the BIOS just fetches delays from the VBT table to place in the hardware registers, so we should get the same values from both places, except for rounding. VBT doesn't provide any values for T1 or T2, so we'll always just use the hardware value for that. The panel power up delay is thus T1 + T2 + T3, which should be sufficient in all cases. The panel power down delay is T1 + T2 + T12, using T1+T2 as a proxy for T11, which isn't available anywhere. For the backlight delays, the eDP spec says T6 + T8 is the delay from the end of link training to backlight on and T9 is the delay from backlight off until video off. The hardware provides a 'backlight on' delay, which I'm taking to be T6 + T8 while the VBT provides something called 'T7', which I'm assuming is s On the macbook air I'm testing with, this yields a power-up delay of over 200ms and a power-down delay of over 600ms. It all works now, but we're frobbing these power controls several times during mode setting, making the whole process take an awfully long time. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-29 07:48:10 +08:00
msleep(intel_dp->panel_power_down_delay);
}
static bool
intel_dp_get_dpcd(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd,
sizeof(intel_dp->dpcd)) < 0)
return false; /* aux transfer failed */
DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
if (intel_dp->dpcd[DP_DPCD_REV] == 0)
return false; /* DPCD not present */
/* Check if the panel supports PSR */
memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd));
if (is_edp(intel_dp)) {
intel_dp_dpcd_read_wake(&intel_dp->aux, DP_PSR_SUPPORT,
intel_dp->psr_dpcd,
sizeof(intel_dp->psr_dpcd));
if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
dev_priv->psr.sink_support = true;
DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
}
}
/* Training Pattern 3 support, both source and sink */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED &&
(IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8)) {
intel_dp->use_tps3 = true;
DRM_DEBUG_KMS("Displayport TPS3 supported\n");
} else
intel_dp->use_tps3 = false;
if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
DP_DWN_STRM_PORT_PRESENT))
return true; /* native DP sink */
if (intel_dp->dpcd[DP_DPCD_REV] == 0x10)
return true; /* no per-port downstream info */
if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
intel_dp->downstream_ports,
DP_MAX_DOWNSTREAM_PORTS) < 0)
return false; /* downstream port status fetch failed */
return true;
}
static void
intel_dp_probe_oui(struct intel_dp *intel_dp)
{
u8 buf[3];
if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
return;
if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3)
DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3)
DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
}
2014-05-02 12:02:48 +08:00
static bool
intel_dp_probe_mst(struct intel_dp *intel_dp)
{
u8 buf[1];
if (!intel_dp->can_mst)
return false;
if (intel_dp->dpcd[DP_DPCD_REV] < 0x12)
return false;
if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
if (buf[0] & DP_MST_CAP) {
DRM_DEBUG_KMS("Sink is MST capable\n");
intel_dp->is_mst = true;
} else {
DRM_DEBUG_KMS("Sink is not MST capable\n");
intel_dp->is_mst = false;
}
}
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
return intel_dp->is_mst;
}
int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct intel_crtc *intel_crtc =
to_intel_crtc(intel_dig_port->base.base.crtc);
u8 buf;
int test_crc_count;
int attempts = 6;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
return -EIO;
if (!(buf & DP_TEST_CRC_SUPPORTED))
return -ENOTTY;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
return -EIO;
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
buf | DP_TEST_SINK_START) < 0)
return -EIO;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
return -EIO;
test_crc_count = buf & DP_TEST_COUNT_MASK;
do {
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_TEST_SINK_MISC, &buf) < 0)
return -EIO;
intel_wait_for_vblank(dev, intel_crtc->pipe);
} while (--attempts && (buf & DP_TEST_COUNT_MASK) == test_crc_count);
if (attempts == 0) {
DRM_DEBUG_KMS("Panel is unable to calculate CRC after 6 vblanks\n");
return -ETIMEDOUT;
}
if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0)
return -EIO;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
return -EIO;
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
buf & ~DP_TEST_SINK_START) < 0)
return -EIO;
return 0;
}
static bool
intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
{
return intel_dp_dpcd_read_wake(&intel_dp->aux,
DP_DEVICE_SERVICE_IRQ_VECTOR,
sink_irq_vector, 1) == 1;
}
2014-05-02 12:02:48 +08:00
static bool
intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)
{
int ret;
ret = intel_dp_dpcd_read_wake(&intel_dp->aux,
DP_SINK_COUNT_ESI,
sink_irq_vector, 14);
if (ret != 14)
return false;
return true;
}
static void
intel_dp_handle_test_request(struct intel_dp *intel_dp)
{
/* NAK by default */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, DP_TEST_NAK);
}
2014-05-02 12:02:48 +08:00
static int
intel_dp_check_mst_status(struct intel_dp *intel_dp)
{
bool bret;
if (intel_dp->is_mst) {
u8 esi[16] = { 0 };
int ret = 0;
int retry;
bool handled;
bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
go_again:
if (bret == true) {
/* check link status - esi[10] = 0x200c */
if (intel_dp->active_mst_links && !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
intel_dp_stop_link_train(intel_dp);
}
DRM_DEBUG_KMS("got esi %3ph\n", esi);
2014-05-02 12:02:48 +08:00
ret = drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled);
if (handled) {
for (retry = 0; retry < 3; retry++) {
int wret;
wret = drm_dp_dpcd_write(&intel_dp->aux,
DP_SINK_COUNT_ESI+1,
&esi[1], 3);
if (wret == 3) {
break;
}
}
bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
if (bret == true) {
DRM_DEBUG_KMS("got esi2 %3ph\n", esi);
2014-05-02 12:02:48 +08:00
goto go_again;
}
} else
ret = 0;
return ret;
} else {
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
DRM_DEBUG_KMS("failed to get ESI - device may have failed\n");
intel_dp->is_mst = false;
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
/* send a hotplug event */
drm_kms_helper_hotplug_event(intel_dig_port->base.base.dev);
}
}
return -EINVAL;
}
/*
* According to DP spec
* 5.1.2:
* 1. Read DPCD
* 2. Configure link according to Receiver Capabilities
* 3. Use Link Training from 2.5.3.3 and 3.5.1.3
* 4. Check link status on receipt of hot-plug interrupt
*/
static void
intel_dp_check_link_status(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
u8 sink_irq_vector;
u8 link_status[DP_LINK_STATUS_SIZE];
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
if (!intel_encoder->connectors_active)
return;
if (WARN_ON(!intel_encoder->base.crtc))
return;
if (!to_intel_crtc(intel_encoder->base.crtc)->active)
return;
/* Try to read receiver status if the link appears to be up */
if (!intel_dp_get_link_status(intel_dp, link_status)) {
return;
}
/* Now read the DPCD to see if it's actually running */
if (!intel_dp_get_dpcd(intel_dp)) {
return;
}
/* Try to read the source of the interrupt */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) {
/* Clear interrupt source */
drm_dp_dpcd_writeb(&intel_dp->aux,
DP_DEVICE_SERVICE_IRQ_VECTOR,
sink_irq_vector);
if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
intel_dp_handle_test_request(intel_dp);
if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
}
if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
intel_encoder->base.name);
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
drm/i915: hsw: fix link training for eDP on port-A According to BSpec the link training sequence for eDP on HSW port-A should be as follows: 1. link training: clock recovery 2. link training: equalization 3. link training: set idle transmission mode 4. display pipe enable 5. link training: disable (set normal mode) Contrary to this at the moment we don't do step 3. and we do step 5. before step 4. Fix this by setting idle transmission mode for eDP at the end of intel_dp_complete_link_train and adding a new intel_dp_stop_link_training function to disable link training. With these changes we'll end up with the following functions corresponding to the above steps: intel_dp_start_link_train -> step 1. intel_dp_complete_link_train -> step 2., step 3. intel_dp_stop_link_train -> step 5. For port-A we'll call intel_dp_stop_link_train only after enabling the pipe, for everything else we'll call it right after intel_dp_complete_link_train to preserve the current behavior. Tested on HSW/HSW-ULT. In v2: - Due to a HW issue we must set idle transmission mode for port-A too before enabling the pipe. Thanks for Arthur Runyan for explaining this. - Update the patch subject to make it clear that it's an eDP fix, DP is not affected. v3: - rename intel_dp_link_train() to intel_dp_set_link_train(), use 'val' instead 'l' as var name. (Paulo) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-03 17:57:41 +08:00
intel_dp_stop_link_train(intel_dp);
}
}
/* XXX this is probably wrong for multiple downstream ports */
static enum drm_connector_status
intel_dp_detect_dpcd(struct intel_dp *intel_dp)
{
uint8_t *dpcd = intel_dp->dpcd;
uint8_t type;
if (!intel_dp_get_dpcd(intel_dp))
return connector_status_disconnected;
/* if there's no downstream port, we're done */
if (!(dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT))
return connector_status_connected;
/* If we're HPD-aware, SINK_COUNT changes dynamically */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) {
uint8_t reg;
if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_COUNT,
&reg, 1) < 0)
return connector_status_unknown;
return DP_GET_SINK_COUNT(reg) ? connector_status_connected
: connector_status_disconnected;
}
/* If no HPD, poke DDC gently */
if (drm_probe_ddc(&intel_dp->aux.ddc))
return connector_status_connected;
/* Well we tried, say unknown for unreliable port types */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
if (type == DP_DS_PORT_TYPE_VGA ||
type == DP_DS_PORT_TYPE_NON_EDID)
return connector_status_unknown;
} else {
type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
DP_DWN_STRM_PORT_TYPE_MASK;
if (type == DP_DWN_STRM_PORT_TYPE_ANALOG ||
type == DP_DWN_STRM_PORT_TYPE_OTHER)
return connector_status_unknown;
}
/* Anything else is out of spec, warn and ignore */
DRM_DEBUG_KMS("Broken DP branch device, ignoring\n");
return connector_status_disconnected;
}
static enum drm_connector_status
edp_detect(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
enum drm_connector_status status;
status = intel_panel_detect(dev);
if (status == connector_status_unknown)
status = connector_status_connected;
return status;
}
static enum drm_connector_status
ironlake_dp_detect(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
return connector_status_disconnected;
return intel_dp_detect_dpcd(intel_dp);
}
static int g4x_digital_port_connected(struct drm_device *dev,
struct intel_digital_port *intel_dig_port)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t bit;
if (IS_VALLEYVIEW(dev)) {
switch (intel_dig_port->port) {
case PORT_B:
bit = PORTB_HOTPLUG_LIVE_STATUS_VLV;
break;
case PORT_C:
bit = PORTC_HOTPLUG_LIVE_STATUS_VLV;
break;
case PORT_D:
bit = PORTD_HOTPLUG_LIVE_STATUS_VLV;
break;
default:
return -EINVAL;
}
} else {
switch (intel_dig_port->port) {
case PORT_B:
bit = PORTB_HOTPLUG_LIVE_STATUS_G4X;
break;
case PORT_C:
bit = PORTC_HOTPLUG_LIVE_STATUS_G4X;
break;
case PORT_D:
bit = PORTD_HOTPLUG_LIVE_STATUS_G4X;
break;
default:
return -EINVAL;
}
}
if ((I915_READ(PORT_HOTPLUG_STAT) & bit) == 0)
return 0;
return 1;
}
static enum drm_connector_status
g4x_dp_detect(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
int ret;
/* Can't disconnect eDP, but you can close the lid... */
if (is_edp(intel_dp)) {
enum drm_connector_status status;
status = intel_panel_detect(dev);
if (status == connector_status_unknown)
status = connector_status_connected;
return status;
}
ret = g4x_digital_port_connected(dev, intel_dig_port);
if (ret == -EINVAL)
return connector_status_unknown;
else if (ret == 0)
return connector_status_disconnected;
return intel_dp_detect_dpcd(intel_dp);
}
static struct edid *
intel_dp_get_edid(struct intel_dp *intel_dp)
{
struct intel_connector *intel_connector = intel_dp->attached_connector;
/* use cached edid if we have one */
if (intel_connector->edid) {
/* invalid edid */
if (IS_ERR(intel_connector->edid))
return NULL;
return drm_edid_duplicate(intel_connector->edid);
} else
return drm_get_edid(&intel_connector->base,
&intel_dp->aux.ddc);
}
static void
intel_dp_set_edid(struct intel_dp *intel_dp)
{
struct intel_connector *intel_connector = intel_dp->attached_connector;
struct edid *edid;
edid = intel_dp_get_edid(intel_dp);
intel_connector->detect_edid = edid;
if (intel_dp->force_audio != HDMI_AUDIO_AUTO)
intel_dp->has_audio = intel_dp->force_audio == HDMI_AUDIO_ON;
else
intel_dp->has_audio = drm_detect_monitor_audio(edid);
}
static void
intel_dp_unset_edid(struct intel_dp *intel_dp)
{
struct intel_connector *intel_connector = intel_dp->attached_connector;
kfree(intel_connector->detect_edid);
intel_connector->detect_edid = NULL;
intel_dp->has_audio = false;
}
static enum intel_display_power_domain
intel_dp_power_get(struct intel_dp *dp)
{
struct intel_encoder *encoder = &dp_to_dig_port(dp)->base;
enum intel_display_power_domain power_domain;
power_domain = intel_display_port_power_domain(encoder);
intel_display_power_get(to_i915(encoder->base.dev), power_domain);
return power_domain;
}
static void
intel_dp_power_put(struct intel_dp *dp,
enum intel_display_power_domain power_domain)
{
struct intel_encoder *encoder = &dp_to_dig_port(dp)->base;
intel_display_power_put(to_i915(encoder->base.dev), power_domain);
}
static enum drm_connector_status
intel_dp_detect(struct drm_connector *connector, bool force)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_device *dev = connector->dev;
enum drm_connector_status status;
enum intel_display_power_domain power_domain;
2014-05-02 12:02:48 +08:00
bool ret;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id, connector->name);
intel_dp_unset_edid(intel_dp);
2014-05-02 12:02:48 +08:00
if (intel_dp->is_mst) {
/* MST devices are disconnected from a monitor POV */
if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
return connector_status_disconnected;
2014-05-02 12:02:48 +08:00
}
power_domain = intel_dp_power_get(intel_dp);
/* Can't disconnect eDP, but you can close the lid... */
if (is_edp(intel_dp))
status = edp_detect(intel_dp);
else if (HAS_PCH_SPLIT(dev))
status = ironlake_dp_detect(intel_dp);
else
status = g4x_dp_detect(intel_dp);
if (status != connector_status_connected)
goto out;
intel_dp_probe_oui(intel_dp);
2014-05-02 12:02:48 +08:00
ret = intel_dp_probe_mst(intel_dp);
if (ret) {
/* if we are in MST mode then this connector
won't appear connected or have anything with EDID on it */
if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
status = connector_status_disconnected;
goto out;
}
intel_dp_set_edid(intel_dp);
if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
status = connector_status_connected;
out:
intel_dp_power_put(intel_dp, power_domain);
return status;
}
static void
intel_dp_force(struct drm_connector *connector)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
enum intel_display_power_domain power_domain;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id, connector->name);
intel_dp_unset_edid(intel_dp);
if (connector->status != connector_status_connected)
return;
power_domain = intel_dp_power_get(intel_dp);
intel_dp_set_edid(intel_dp);
intel_dp_power_put(intel_dp, power_domain);
if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
}
static int intel_dp_get_modes(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct edid *edid;
edid = intel_connector->detect_edid;
if (edid) {
int ret = intel_connector_update_modes(connector, edid);
if (ret)
return ret;
}
/* if eDP has no EDID, fall back to fixed mode */
if (is_edp(intel_attached_dp(connector)) &&
intel_connector->panel.fixed_mode) {
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev,
intel_connector->panel.fixed_mode);
if (mode) {
drm_mode_probed_add(connector, mode);
return 1;
}
}
return 0;
}
static bool
intel_dp_detect_audio(struct drm_connector *connector)
{
bool has_audio = false;
struct edid *edid;
edid = to_intel_connector(connector)->detect_edid;
if (edid)
has_audio = drm_detect_monitor_audio(edid);
return has_audio;
}
static int
intel_dp_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t val)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_encoder *intel_encoder = intel_attached_encoder(connector);
struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
int ret;
ret = drm_object_property_set_value(&connector->base, property, val);
if (ret)
return ret;
if (property == dev_priv->force_audio_property) {
int i = val;
bool has_audio;
if (i == intel_dp->force_audio)
return 0;
intel_dp->force_audio = i;
if (i == HDMI_AUDIO_AUTO)
has_audio = intel_dp_detect_audio(connector);
else
has_audio = (i == HDMI_AUDIO_ON);
if (has_audio == intel_dp->has_audio)
return 0;
intel_dp->has_audio = has_audio;
goto done;
}
if (property == dev_priv->broadcast_rgb_property) {
bool old_auto = intel_dp->color_range_auto;
uint32_t old_range = intel_dp->color_range;
switch (val) {
case INTEL_BROADCAST_RGB_AUTO:
intel_dp->color_range_auto = true;
break;
case INTEL_BROADCAST_RGB_FULL:
intel_dp->color_range_auto = false;
intel_dp->color_range = 0;
break;
case INTEL_BROADCAST_RGB_LIMITED:
intel_dp->color_range_auto = false;
intel_dp->color_range = DP_COLOR_RANGE_16_235;
break;
default:
return -EINVAL;
}
if (old_auto == intel_dp->color_range_auto &&
old_range == intel_dp->color_range)
return 0;
goto done;
}
if (is_edp(intel_dp) &&
property == connector->dev->mode_config.scaling_mode_property) {
if (val == DRM_MODE_SCALE_NONE) {
DRM_DEBUG_KMS("no scaling not supported\n");
return -EINVAL;
}
if (intel_connector->panel.fitting_mode == val) {
/* the eDP scaling property is not changed */
return 0;
}
intel_connector->panel.fitting_mode = val;
goto done;
}
return -EINVAL;
done:
if (intel_encoder->base.crtc)
intel_crtc_restore_mode(intel_encoder->base.crtc);
return 0;
}
static void
intel_dp_connector_destroy(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
kfree(intel_connector->detect_edid);
if (!IS_ERR_OR_NULL(intel_connector->edid))
kfree(intel_connector->edid);
/* Can't call is_edp() since the encoder may have been destroyed
* already. */
if (connector->connector_type == DRM_MODE_CONNECTOR_eDP)
intel_panel_fini(&intel_connector->panel);
drm_connector_cleanup(connector);
kfree(connector);
}
void intel_dp_encoder_destroy(struct drm_encoder *encoder)
{
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
struct intel_dp *intel_dp = &intel_dig_port->dp;
drm_dp_aux_unregister(&intel_dp->aux);
2014-05-02 12:02:48 +08:00
intel_dp_mst_encoder_cleanup(intel_dig_port);
if (is_edp(intel_dp)) {
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
/*
* vdd might still be enabled do to the delayed vdd off.
* Make sure vdd is actually turned off here.
*/
pps_lock(intel_dp);
edp_panel_vdd_off_sync(intel_dp);
pps_unlock(intel_dp);
if (intel_dp->edp_notifier.notifier_call) {
unregister_reboot_notifier(&intel_dp->edp_notifier);
intel_dp->edp_notifier.notifier_call = NULL;
}
}
drm_encoder_cleanup(encoder);
kfree(intel_dig_port);
}
static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
if (!is_edp(intel_dp))
return;
/*
* vdd might still be enabled do to the delayed vdd off.
* Make sure vdd is actually turned off here.
*/
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
pps_lock(intel_dp);
edp_panel_vdd_off_sync(intel_dp);
pps_unlock(intel_dp);
}
static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
lockdep_assert_held(&dev_priv->pps_mutex);
if (!edp_have_panel_vdd(intel_dp))
return;
/*
* The VDD bit needs a power domain reference, so if the bit is
* already enabled when we boot or resume, grab this reference and
* schedule a vdd off, so we don't hold on to the reference
* indefinitely.
*/
DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n");
power_domain = intel_display_port_power_domain(&intel_dig_port->base);
intel_display_power_get(dev_priv, power_domain);
edp_panel_vdd_schedule_off(intel_dp);
}
static void intel_dp_encoder_reset(struct drm_encoder *encoder)
{
struct intel_dp *intel_dp;
if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP)
return;
intel_dp = enc_to_intel_dp(encoder);
pps_lock(intel_dp);
/*
* Read out the current power sequencer assignment,
* in case the BIOS did something with it.
*/
if (IS_VALLEYVIEW(encoder->dev))
vlv_initial_power_sequencer_setup(intel_dp);
intel_edp_panel_vdd_sanitize(intel_dp);
pps_unlock(intel_dp);
}
static const struct drm_connector_funcs intel_dp_connector_funcs = {
.dpms = intel_connector_dpms,
.detect = intel_dp_detect,
.force = intel_dp_force,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = intel_dp_set_property,
.atomic_get_property = intel_connector_atomic_get_property,
.destroy = intel_dp_connector_destroy,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
.get_modes = intel_dp_get_modes,
.mode_valid = intel_dp_mode_valid,
.best_encoder = intel_best_encoder,
};
static const struct drm_encoder_funcs intel_dp_enc_funcs = {
.reset = intel_dp_encoder_reset,
.destroy = intel_dp_encoder_destroy,
};
2014-05-02 12:02:48 +08:00
void
intel_dp_hot_plug(struct intel_encoder *intel_encoder)
{
2014-05-02 12:02:48 +08:00
return;
}
enum irqreturn
intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
{
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct intel_encoder *intel_encoder = &intel_dig_port->base;
2014-05-02 12:02:48 +08:00
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
enum irqreturn ret = IRQ_NONE;
2014-05-02 12:02:48 +08:00
if (intel_dig_port->base.type != INTEL_OUTPUT_EDP)
intel_dig_port->base.type = INTEL_OUTPUT_DISPLAYPORT;
if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
/*
* vdd off can generate a long pulse on eDP which
* would require vdd on to handle it, and thus we
* would end up in an endless cycle of
* "vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..."
*/
DRM_DEBUG_KMS("ignoring long hpd on eDP port %c\n",
port_name(intel_dig_port->port));
return false;
}
DRM_DEBUG_KMS("got hpd irq on port %c - %s\n",
port_name(intel_dig_port->port),
2014-05-02 12:02:48 +08:00
long_hpd ? "long" : "short");
power_domain = intel_display_port_power_domain(intel_encoder);
intel_display_power_get(dev_priv, power_domain);
2014-05-02 12:02:48 +08:00
if (long_hpd) {
if (HAS_PCH_SPLIT(dev)) {
if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
goto mst_fail;
} else {
if (g4x_digital_port_connected(dev, intel_dig_port) != 1)
goto mst_fail;
}
2014-05-02 12:02:48 +08:00
if (!intel_dp_get_dpcd(intel_dp)) {
goto mst_fail;
}
intel_dp_probe_oui(intel_dp);
if (!intel_dp_probe_mst(intel_dp))
goto mst_fail;
} else {
if (intel_dp->is_mst) {
if (intel_dp_check_mst_status(intel_dp) == -EINVAL)
2014-05-02 12:02:48 +08:00
goto mst_fail;
}
if (!intel_dp->is_mst) {
/*
* we'll check the link status via the normal hot plug path later -
* but for short hpds we should check it now
*/
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
2014-05-02 12:02:48 +08:00
intel_dp_check_link_status(intel_dp);
drm_modeset_unlock(&dev->mode_config.connection_mutex);
2014-05-02 12:02:48 +08:00
}
}
ret = IRQ_HANDLED;
goto put_power;
2014-05-02 12:02:48 +08:00
mst_fail:
/* if we were in MST mode, and device is not there get out of MST mode */
if (intel_dp->is_mst) {
DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n", intel_dp->is_mst, intel_dp->mst_mgr.mst_state);
intel_dp->is_mst = false;
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
}
put_power:
intel_display_power_put(dev_priv, power_domain);
return ret;
}
/* Return which DP Port should be selected for Transcoder DP control */
int
intel_trans_dp_port_sel(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_encoder *intel_encoder;
struct intel_dp *intel_dp;
for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
intel_dp = enc_to_intel_dp(&intel_encoder->base);
if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
intel_encoder->type == INTEL_OUTPUT_EDP)
return intel_dp->output_reg;
}
return -1;
}
/* check the VBT to see whether the eDP is on DP-D port */
bool intel_dp_is_edp(struct drm_device *dev, enum port port)
{
struct drm_i915_private *dev_priv = dev->dev_private;
union child_device_config *p_child;
int i;
static const short port_mapping[] = {
[PORT_B] = PORT_IDPB,
[PORT_C] = PORT_IDPC,
[PORT_D] = PORT_IDPD,
};
if (port == PORT_A)
return true;
if (!dev_priv->vbt.child_dev_num)
return false;
for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
p_child = dev_priv->vbt.child_dev + i;
if (p_child->common.dvo_port == port_mapping[port] &&
(p_child->common.device_type & DEVICE_TYPE_eDP_BITS) ==
(DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS))
return true;
}
return false;
}
2014-05-02 12:02:48 +08:00
void
intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
intel_dp->color_range_auto = true;
if (is_edp(intel_dp)) {
drm_mode_create_scaling_mode_property(connector->dev);
drm_object_attach_property(
&connector->base,
connector->dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_ASPECT);
intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
}
}
static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
{
intel_dp->last_power_cycle = jiffies;
intel_dp->last_power_on = jiffies;
intel_dp->last_backlight_off = jiffies;
}
static void
intel_dp_init_panel_power_sequencer(struct drm_device *dev,
struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct edp_power_seq cur, vbt, spec,
*final = &intel_dp->pps_delays;
u32 pp_on, pp_off, pp_div, pp;
int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
/* already initialized? */
if (final->t11_t12 != 0)
return;
if (HAS_PCH_SPLIT(dev)) {
pp_ctrl_reg = PCH_PP_CONTROL;
pp_on_reg = PCH_PP_ON_DELAYS;
pp_off_reg = PCH_PP_OFF_DELAYS;
pp_div_reg = PCH_PP_DIVISOR;
} else {
enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
}
/* Workaround: Need to write PP_CONTROL with the unlock key as
* the very first thing. */
pp = ironlake_get_pp_control(intel_dp);
I915_WRITE(pp_ctrl_reg, pp);
pp_on = I915_READ(pp_on_reg);
pp_off = I915_READ(pp_off_reg);
pp_div = I915_READ(pp_div_reg);
/* Pull timing values out of registers */
cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
PANEL_POWER_UP_DELAY_SHIFT;
cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
PANEL_LIGHT_ON_DELAY_SHIFT;
cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
PANEL_LIGHT_OFF_DELAY_SHIFT;
cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
PANEL_POWER_DOWN_DELAY_SHIFT;
cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
vbt = dev_priv->vbt.edp_pps;
/* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
* our hw here, which are all in 100usec. */
spec.t1_t3 = 210 * 10;
spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */
spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */
spec.t10 = 500 * 10;
/* This one is special and actually in units of 100ms, but zero
* based in the hw (so we need to add 100 ms). But the sw vbt
* table multiplies it with 1000 to make it in units of 100usec,
* too. */
spec.t11_t12 = (510 + 100) * 10;
DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12);
/* Use the max of the register settings and vbt. If both are
* unset, fall back to the spec limits. */
#define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \
spec.field : \
max(cur.field, vbt.field))
assign_final(t1_t3);
assign_final(t8);
assign_final(t9);
assign_final(t10);
assign_final(t11_t12);
#undef assign_final
#define get_delay(field) (DIV_ROUND_UP(final->field, 10))
intel_dp->panel_power_up_delay = get_delay(t1_t3);
intel_dp->backlight_on_delay = get_delay(t8);
intel_dp->backlight_off_delay = get_delay(t9);
intel_dp->panel_power_down_delay = get_delay(t10);
intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
#undef get_delay
DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
intel_dp->panel_power_cycle_delay);
DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
}
static void
intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_on, pp_off, pp_div, port_sel = 0;
int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
int pp_on_reg, pp_off_reg, pp_div_reg;
enum port port = dp_to_dig_port(intel_dp)->port;
const struct edp_power_seq *seq = &intel_dp->pps_delays;
lockdep_assert_held(&dev_priv->pps_mutex);
if (HAS_PCH_SPLIT(dev)) {
pp_on_reg = PCH_PP_ON_DELAYS;
pp_off_reg = PCH_PP_OFF_DELAYS;
pp_div_reg = PCH_PP_DIVISOR;
} else {
enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
}
/*
* And finally store the new values in the power sequencer. The
* backlight delays are set to 1 because we do manual waits on them. For
* T8, even BSpec recommends doing it. For T9, if we don't do this,
* we'll end up waiting for the backlight off delay twice: once when we
* do the manual sleep, and once when we disable the panel and wait for
* the PP_STATUS bit to become zero.
*/
pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
(1 << PANEL_LIGHT_ON_DELAY_SHIFT);
pp_off = (1 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
(seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
/* Compute the divisor for the pp clock, simply match the Bspec
* formula. */
pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
<< PANEL_POWER_CYCLE_DELAY_SHIFT);
/* Haswell doesn't have any port selection bits for the panel
* power sequencer any more. */
if (IS_VALLEYVIEW(dev)) {
port_sel = PANEL_PORT_SELECT_VLV(port);
} else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
if (port == PORT_A)
port_sel = PANEL_PORT_SELECT_DPA;
else
port_sel = PANEL_PORT_SELECT_DPD;
}
pp_on |= port_sel;
I915_WRITE(pp_on_reg, pp_on);
I915_WRITE(pp_off_reg, pp_off);
I915_WRITE(pp_div_reg, pp_div);
DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
I915_READ(pp_on_reg),
I915_READ(pp_off_reg),
I915_READ(pp_div_reg));
}
static void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *encoder;
struct intel_digital_port *dig_port = NULL;
struct intel_dp *intel_dp = dev_priv->drrs.dp;
struct intel_crtc_state *config = NULL;
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
struct intel_crtc *intel_crtc = NULL;
u32 reg, val;
enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
if (refresh_rate <= 0) {
DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n");
return;
}
if (intel_dp == NULL) {
DRM_DEBUG_KMS("DRRS not supported.\n");
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
return;
}
/*
* FIXME: This needs proper synchronization with psr state for some
* platforms that cannot have PSR and DRRS enabled at the same time.
*/
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
dig_port = dp_to_dig_port(intel_dp);
encoder = &dig_port->base;
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
intel_crtc = encoder->new_crtc;
if (!intel_crtc) {
DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n");
return;
}
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
config = intel_crtc->config;
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
DRM_DEBUG_KMS("Only Seamless DRRS supported.\n");
return;
}
if (intel_dp->attached_connector->panel.downclock_mode->vrefresh ==
refresh_rate)
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
index = DRRS_LOW_RR;
if (index == dev_priv->drrs.refresh_rate_type) {
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
DRM_DEBUG_KMS(
"DRRS requested for previously set RR...ignoring\n");
return;
}
if (!intel_crtc->active) {
DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
return;
}
if (INTEL_INFO(dev)->gen > 6 && INTEL_INFO(dev)->gen < 8) {
drm/i915: Make intel_crtc->config a pointer To match the semantics of drm_crtc->state, which this will eventually become. The allocation of the memory for config will be fixed in a followup patch. By adding the extra _config field to intel_crtc it was possible to generate this entire patch with the cocci script below. @@ @@ struct intel_crtc { ... -struct intel_crtc_state config; +struct intel_crtc_state _config; +struct intel_crtc_state *config; ... } @@ struct intel_crtc *crtc; @@ -memset(&crtc->config, 0, sizeof(crtc->config)); +memset(crtc->config, 0, sizeof(*crtc->config)); @@ @@ __intel_set_mode(...) { <... -to_intel_crtc(crtc)->config = *pipe_config; +(*(to_intel_crtc(crtc)->config)) = *pipe_config; ...> } @@ @@ intel_crtc_init(...) { ... WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe); +intel_crtc->config = &intel_crtc->_config; return; ... } @@ struct intel_crtc *crtc; @@ -&crtc->config +crtc->config @@ struct intel_crtc *crtc; identifier member; @@ -crtc->config.member +crtc->config->member @@ expression E; @@ -&(to_intel_crtc(E)->config) +to_intel_crtc(E)->config @@ expression E; identifier member; @@ -to_intel_crtc(E)->config.member +to_intel_crtc(E)->config->member v2: Clarify manual changes by splitting them into another patch. (Matt) Improve cocci script to generate even more of the changes. (Ander) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-15 20:55:25 +08:00
reg = PIPECONF(intel_crtc->config->cpu_transcoder);
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
val = I915_READ(reg);
if (index > DRRS_HIGH_RR) {
val |= PIPECONF_EDP_RR_MODE_SWITCH;
intel_dp_set_m_n(intel_crtc);
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
} else {
val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
}
I915_WRITE(reg, val);
}
dev_priv->drrs.refresh_rate_type = index;
DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate);
}
void intel_edp_drrs_enable(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_crtc *crtc = dig_port->base.base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
if (!intel_crtc->config->has_drrs) {
DRM_DEBUG_KMS("Panel doesn't support DRRS\n");
return;
}
mutex_lock(&dev_priv->drrs.mutex);
if (WARN_ON(dev_priv->drrs.dp)) {
DRM_ERROR("DRRS already enabled\n");
goto unlock;
}
dev_priv->drrs.busy_frontbuffer_bits = 0;
dev_priv->drrs.dp = intel_dp;
unlock:
mutex_unlock(&dev_priv->drrs.mutex);
}
void intel_edp_drrs_disable(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_crtc *crtc = dig_port->base.base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
if (!intel_crtc->config->has_drrs)
return;
mutex_lock(&dev_priv->drrs.mutex);
if (!dev_priv->drrs.dp) {
mutex_unlock(&dev_priv->drrs.mutex);
return;
}
if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
intel_dp_set_drrs_state(dev_priv->dev,
intel_dp->attached_connector->panel.
fixed_mode->vrefresh);
dev_priv->drrs.dp = NULL;
mutex_unlock(&dev_priv->drrs.mutex);
cancel_delayed_work_sync(&dev_priv->drrs.work);
}
static void intel_edp_drrs_downclock_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv), drrs.work.work);
struct intel_dp *intel_dp;
mutex_lock(&dev_priv->drrs.mutex);
intel_dp = dev_priv->drrs.dp;
if (!intel_dp)
goto unlock;
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
/*
* The delayed work can race with an invalidate hence we need to
* recheck.
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
*/
if (dev_priv->drrs.busy_frontbuffer_bits)
goto unlock;
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR)
intel_dp_set_drrs_state(dev_priv->dev,
intel_dp->attached_connector->panel.
downclock_mode->vrefresh);
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
unlock:
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
mutex_unlock(&dev_priv->drrs.mutex);
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
}
void intel_edp_drrs_invalidate(struct drm_device *dev,
unsigned frontbuffer_bits)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
enum pipe pipe;
if (!dev_priv->drrs.dp)
return;
mutex_lock(&dev_priv->drrs.mutex);
crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
cancel_delayed_work_sync(&dev_priv->drrs.work);
intel_dp_set_drrs_state(dev_priv->dev,
dev_priv->drrs.dp->attached_connector->panel.
fixed_mode->vrefresh);
}
frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
mutex_unlock(&dev_priv->drrs.mutex);
}
void intel_edp_drrs_flush(struct drm_device *dev,
unsigned frontbuffer_bits)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
enum pipe pipe;
if (!dev_priv->drrs.dp)
return;
mutex_lock(&dev_priv->drrs.mutex);
crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
cancel_delayed_work_sync(&dev_priv->drrs.work);
if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR &&
!dev_priv->drrs.busy_frontbuffer_bits)
schedule_delayed_work(&dev_priv->drrs.work,
msecs_to_jiffies(1000));
mutex_unlock(&dev_priv->drrs.mutex);
}
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
static struct drm_display_mode *
intel_dp_drrs_init(struct intel_connector *intel_connector,
struct drm_display_mode *fixed_mode)
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
{
struct drm_connector *connector = &intel_connector->base;
struct drm_device *dev = connector->dev;
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *downclock_mode = NULL;
if (INTEL_INFO(dev)->gen <= 6) {
DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n");
return NULL;
}
if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
DRM_DEBUG_KMS("VBT doesn't support DRRS\n");
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
return NULL;
}
downclock_mode = intel_find_panel_downclock
(dev, fixed_mode, connector);
if (!downclock_mode) {
DRM_DEBUG_KMS("DRRS not supported\n");
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
return NULL;
}
INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work);
mutex_init(&dev_priv->drrs.mutex);
drm/i915: Add support for DRRS to switch RR This patch computes and stored 2nd M/N/TU for switching to different refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle between alternate refresh rates programmed in 2nd M/N/TU registers. v2: Daniel's review comments Computing M2/N2 in compute_config and storing it in crtc_config v3: Modified reference to edp_downclock and edp_downclock_avail based on the changes made to move them from dev_private to intel_panel. v4: Modified references to is_drrs_supported based on the changes made to rename it to drrs_support. v5: Jani's review comments Removed superfluous return statements. Changed support for Gen 7 and above. Corrected indentation. Re-structured the code which finds crtc and connector from encoder. Changed some logs to be less verbose. v6: Modifying i915_drrs to include only intel connector as intel_dp can be derived from intel connector when required. v7: As per internal review comments, acquiring mutex just before accessing drrs RR. As per Chris's review comments, added documentation about the use of locking in the function. v8: Incorporated Jani's review comments. Removed reference to edp_downclock. v9: Jani's review comments. Modified comment in set_drrs. Changed index to type edp_drrs_refresh_rate_type. Check if PSR is enabled before setting registers fo DRRS. Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:43:28 +08:00
dev_priv->drrs.type = dev_priv->vbt.drrs_type;
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR;
DRM_DEBUG_KMS("seamless DRRS supported for eDP panel.\n");
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
return downclock_mode;
}
static bool intel_edp_init_connector(struct intel_dp *intel_dp,
struct intel_connector *intel_connector)
{
struct drm_connector *connector = &intel_connector->base;
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *fixed_mode = NULL;
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
struct drm_display_mode *downclock_mode = NULL;
bool has_dpcd;
struct drm_display_mode *scan;
struct edid *edid;
enum pipe pipe = INVALID_PIPE;
dev_priv->drrs.type = DRRS_NOT_SUPPORTED;
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
if (!is_edp(intel_dp))
return true;
pps_lock(intel_dp);
intel_edp_panel_vdd_sanitize(intel_dp);
pps_unlock(intel_dp);
/* Cache DPCD and EDID for edp. */
has_dpcd = intel_dp_get_dpcd(intel_dp);
if (has_dpcd) {
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
dev_priv->no_aux_handshake =
intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
} else {
/* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n");
return false;
}
/* We now know it's not a ghost, init power sequence regs. */
pps_lock(intel_dp);
intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
pps_unlock(intel_dp);
mutex_lock(&dev->mode_config.mutex);
edid = drm_get_edid(connector, &intel_dp->aux.ddc);
if (edid) {
if (drm_add_edid_modes(connector, edid)) {
drm_mode_connector_update_edid_property(connector,
edid);
drm_edid_to_eld(connector, edid);
} else {
kfree(edid);
edid = ERR_PTR(-EINVAL);
}
} else {
edid = ERR_PTR(-ENOENT);
}
intel_connector->edid = edid;
/* prefer fixed mode from EDID if available */
list_for_each_entry(scan, &connector->probed_modes, head) {
if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
fixed_mode = drm_mode_duplicate(dev, scan);
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
downclock_mode = intel_dp_drrs_init(
intel_connector, fixed_mode);
break;
}
}
/* fallback to VBT if available for eDP */
if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) {
fixed_mode = drm_mode_duplicate(dev,
dev_priv->vbt.lfp_lvds_vbt_mode);
if (fixed_mode)
fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
}
mutex_unlock(&dev->mode_config.mutex);
if (IS_VALLEYVIEW(dev)) {
intel_dp->edp_notifier.notifier_call = edp_notify_handler;
register_reboot_notifier(&intel_dp->edp_notifier);
/*
* Figure out the current pipe for the initial backlight setup.
* If the current pipe isn't valid, try the PPS pipe, and if that
* fails just assume pipe A.
*/
if (IS_CHERRYVIEW(dev))
pipe = DP_PORT_TO_PIPE_CHV(intel_dp->DP);
else
pipe = PORT_TO_PIPE(intel_dp->DP);
if (pipe != PIPE_A && pipe != PIPE_B)
pipe = intel_dp->pps_pipe;
if (pipe != PIPE_A && pipe != PIPE_B)
pipe = PIPE_A;
DRM_DEBUG_KMS("using pipe %c for initial backlight setup\n",
pipe_name(pipe));
}
drm/i915: Parse EDID probed modes for DRRS support This patch and finds out the lowest refresh rate supported for the resolution same as the fixed_mode. It also checks the VBT fields to see if panel supports seamless DRRS or not. Based on above data it marks whether eDP panel supports seamless DRRS or not. This information is needed for supporting seamless DRRS switch for certain power saving usecases. This patch is tested by enabling the DRM logs and user should see whether Seamless DRRS is supported or not. v2: Daniel's review comments Modified downclock deduction based on intel_find_panel_downclock v3: Chris's review comments Moved edp_downclock_avail and edp_downclock to intel_panel v4: Jani's review comments. Changed name of the enum edp_panel_type to drrs_support type. Change is_drrs_supported to drrs_support of type enum drrs_support_type. v5: Incorporated Jani's review comments Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7 and above. v6: Incorporated Chris's review comments. Changed initialize to init in intel_drrs_initialize v7: Incorporated Jani's review comments. Removed edp_downclock and edp_downclock_avail. Return NULL explicitly. Make drrs_state and unnamed struct. Move Gen based check inside drrs_init. v8: Made changes to track PSR enable/disable throughout system use (instead of just in the init sequence) for disabling/enabling DRRS. Jani's review comments. v9: PSR tracking will be done as part of idleness detection patch. Removed PSR state tracker in i915_drrs. Jani's review comments. v10: Added log for DRRS not supported in drrs_init v11: Modification in drrs_init. suggested by Jani Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-05 14:42:31 +08:00
intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
intel_connector->panel.backlight_power = intel_edp_backlight_power;
intel_panel_setup_backlight(connector, pipe);
return true;
}
bool
intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
struct intel_connector *intel_connector)
{
struct drm_connector *connector = &intel_connector->base;
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_dig_port->port;
int type;
intel_dp->pps_pipe = INVALID_PIPE;
/* intel_dp vfuncs */
if (INTEL_INFO(dev)->gen >= 9)
intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider;
else if (IS_VALLEYVIEW(dev))
intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
else if (HAS_PCH_SPLIT(dev))
intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider;
else
intel_dp->get_aux_clock_divider = i9xx_get_aux_clock_divider;
if (INTEL_INFO(dev)->gen >= 9)
intel_dp->get_aux_send_ctl = skl_get_aux_send_ctl;
else
intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl;
/* Preserve the current hw state. */
intel_dp->DP = I915_READ(intel_dp->output_reg);
intel_dp->attached_connector = intel_connector;
if (intel_dp_is_edp(dev, port))
type = DRM_MODE_CONNECTOR_eDP;
else
type = DRM_MODE_CONNECTOR_DisplayPort;
/*
* For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
* for DP the encoder type can be set by the caller to
* INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
*/
if (type == DRM_MODE_CONNECTOR_eDP)
intel_encoder->type = INTEL_OUTPUT_EDP;
/* eDP only on port B and/or C on vlv/chv */
if (WARN_ON(IS_VALLEYVIEW(dev) && is_edp(intel_dp) &&
port != PORT_B && port != PORT_C))
return false;
DRM_DEBUG_KMS("Adding %s connector on port %c\n",
type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",
port_name(port));
drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
edp_panel_vdd_work);
intel_connector_attach_encoder(intel_connector, intel_encoder);
drm_connector_register(connector);
if (HAS_DDI(dev))
intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
else
intel_connector->get_hw_state = intel_connector_get_hw_state;
2014-02-11 23:12:49 +08:00
intel_connector->unregister = intel_dp_connector_unregister;
/* Set up the hotplug pin. */
switch (port) {
case PORT_A:
intel_encoder->hpd_pin = HPD_PORT_A;
break;
case PORT_B:
intel_encoder->hpd_pin = HPD_PORT_B;
break;
case PORT_C:
intel_encoder->hpd_pin = HPD_PORT_C;
break;
case PORT_D:
intel_encoder->hpd_pin = HPD_PORT_D;
break;
default:
BUG();
}
if (is_edp(intel_dp)) {
pps_lock(intel_dp);
intel_dp_init_panel_power_timestamps(intel_dp);
if (IS_VALLEYVIEW(dev))
vlv_initial_power_sequencer_setup(intel_dp);
else
intel_dp_init_panel_power_sequencer(dev, intel_dp);
pps_unlock(intel_dp);
}
drm/i915: init the DP panel power seq variables earlier Our driver has two different ways of waiting for panel power sequencing delays. One of these ways is through ironlake_wait_panel_status, which implicitly uses the values written to our registers. The other way is through the functions that call intel_wait_until_after, and on this case we do direct msleep() calls on the intel_dp->xxx_delay variables. Function intel_dp_init_panel_power_sequencer is responsible for initializing the _delay variables and deciding which values we need to write to the registers, but it does not write these values to the registers. Only at intel_dp_init_panel_power_sequencer_registers we actually do this write. Then problem is that when we call intel_dp_i2c_init, we will get some I2C calls, which will trigger a VDD enable, which will make use of the panel power sequencing registers and the _delay variables, so we need to have both ready by this time. Today, when this happens, the _delay variables are zero (because they were not computed) and the panel power sequence registers contain whatever values were written by the BIOS (which are usually correct). What this patch does is to make sure that function intel_dp_init_panel_power_sequencer is called earlier, so by the time we call intel_dp_i2c_init, the _delay variables will already be initialized. The actual registers won't contain their final values, but at least they will contain the values set by the BIOS. The good side is that we were reading the values, but were not using them for anything (because we were just skipping the msleep(0) calls), so this "fix" shouldn't fix any real existing bugs. I was only able to identify the problem because I added some debug code to check how much time time we were saving with my previous patch. Regression introduced by: commit ed92f0b239ac971edc509169ae3d6955fbe0a188 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Wed Jun 12 17:27:24 2013 -0300 drm/i915: extract intel_edp_init_connector v2: - Rewrite commit message. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-20 00:29:39 +08:00
intel_dp_aux_init(intel_dp, intel_connector);
2014-05-02 12:02:48 +08:00
/* init MST on ports that can support it */
if (IS_HASWELL(dev) || IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
2014-05-02 12:02:48 +08:00
if (port == PORT_B || port == PORT_C || port == PORT_D) {
intel_dp_mst_encoder_init(intel_dig_port,
intel_connector->base.base.id);
2014-05-02 12:02:48 +08:00
}
}
if (!intel_edp_init_connector(intel_dp, intel_connector)) {
drm_dp_aux_unregister(&intel_dp->aux);
if (is_edp(intel_dp)) {
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
/*
* vdd might still be enabled do to the delayed vdd off.
* Make sure vdd is actually turned off here.
*/
pps_lock(intel_dp);
edp_panel_vdd_off_sync(intel_dp);
pps_unlock(intel_dp);
}
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
return false;
}
intel_dp_add_properties(intel_dp, connector);
/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
* 0xd. Failure to do so will result in spurious interrupts being
* generated on the port when a cable is not attached.
*/
if (IS_G4X(dev) && !IS_GM45(dev)) {
u32 temp = I915_READ(PEG_BAND_GAP_DATA);
I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
}
return true;
}
void
intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port;
struct intel_encoder *intel_encoder;
struct drm_encoder *encoder;
struct intel_connector *intel_connector;
intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
if (!intel_dig_port)
return;
intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
if (!intel_connector) {
kfree(intel_dig_port);
return;
}
intel_encoder = &intel_dig_port->base;
encoder = &intel_encoder->base;
drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
DRM_MODE_ENCODER_TMDS);
intel_encoder->compute_config = intel_dp_compute_config;
intel_encoder->disable = intel_disable_dp;
intel_encoder->get_hw_state = intel_dp_get_hw_state;
intel_encoder->get_config = intel_dp_get_config;
intel_encoder->suspend = intel_dp_encoder_suspend;
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
if (IS_CHERRYVIEW(dev)) {
intel_encoder->pre_pll_enable = chv_dp_pre_pll_enable;
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
intel_encoder->pre_enable = chv_pre_enable_dp;
intel_encoder->enable = vlv_enable_dp;
intel_encoder->post_disable = chv_post_disable_dp;
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 18:28:20 +08:00
} else if (IS_VALLEYVIEW(dev)) {
intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable;
intel_encoder->pre_enable = vlv_pre_enable_dp;
intel_encoder->enable = vlv_enable_dp;
intel_encoder->post_disable = vlv_post_disable_dp;
} else {
intel_encoder->pre_enable = g4x_pre_enable_dp;
intel_encoder->enable = g4x_enable_dp;
if (INTEL_INFO(dev)->gen >= 5)
intel_encoder->post_disable = ilk_post_disable_dp;
}
intel_dig_port->port = port;
intel_dig_port->dp.output_reg = output_reg;
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
if (IS_CHERRYVIEW(dev)) {
if (port == PORT_D)
intel_encoder->crtc_mask = 1 << 2;
else
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
} else {
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
}
intel_encoder->cloneable = 0;
intel_encoder->hot_plug = intel_dp_hot_plug;
intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
dev_priv->hpd_irq_port[port] = intel_dig_port;
if (!intel_dp_init_connector(intel_dig_port, intel_connector)) {
drm_encoder_cleanup(encoder);
kfree(intel_dig_port);
kfree(intel_connector);
}
}
2014-05-02 12:02:48 +08:00
void intel_dp_mst_suspend(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
/* disable MST */
for (i = 0; i < I915_MAX_PORTS; i++) {
struct intel_digital_port *intel_dig_port = dev_priv->hpd_irq_port[i];
if (!intel_dig_port)
continue;
if (intel_dig_port->base.type == INTEL_OUTPUT_DISPLAYPORT) {
if (!intel_dig_port->dp.can_mst)
continue;
if (intel_dig_port->dp.is_mst)
drm_dp_mst_topology_mgr_suspend(&intel_dig_port->dp.mst_mgr);
}
}
}
void intel_dp_mst_resume(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
for (i = 0; i < I915_MAX_PORTS; i++) {
struct intel_digital_port *intel_dig_port = dev_priv->hpd_irq_port[i];
if (!intel_dig_port)
continue;
if (intel_dig_port->base.type == INTEL_OUTPUT_DISPLAYPORT) {
int ret;
if (!intel_dig_port->dp.can_mst)
continue;
ret = drm_dp_mst_topology_mgr_resume(&intel_dig_port->dp.mst_mgr);
if (ret != 0) {
intel_dp_check_mst_status(&intel_dig_port->dp);
}
}
}
}