OpenCloudOS-Kernel/arch/Kconfig

360 lines
9.7 KiB
Plaintext
Raw Normal View History

Create arch/Kconfig Puts the content of arch/Kconfig in the "General setup" menu. Linus: > Should it come with a re-duplication of it's content into each > architecture, which was the case previously ? The oprofile and kprobes > menu entries were litteraly cut and pasted from one architecture to > another. Should we put its content in init/Kconfig then ? I don't think it's a good idea to go back to making it per-architecture, although that extensive "depends on <list-of-archiectures-here>" might indicate that there certainly is room for cleanup there. And I don't think it's wrong keeping it in kernel/Kconfig.xyz per se, I just think it's wrong to (a) lump the code together when it really doesn't necessarily need to and (b) show it to users as some kind of choice that is tied together (whether it then has common code or not). On the per-architecture side, I do think it would be better to *not* have internal architecture knowledge in a generic file, and as such a line like depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32 really shouldn't exist in a file like kernel/Kconfig.instrumentation. It would be much better to do depends on ARCH_SUPPORTS_KPROBES in that generic file, and then architectures that do support it would just have a bool ARCH_SUPPORTS_KPROBES default y in *their* architecture files. That would seem to be much more logical, and is readable both for arch maintainers *and* for people who have no clue - and don't care - about which architecture is supposed to support which interface... Sam Ravnborg: Stuff it into a new file: arch/Kconfig We can then extend this file to include all the 'trailing' Kconfig things that are anyway equal for all ARCHs. But it should be kept clean - so if we introduce such a file then we should use ARCH_HAS_whatever in the arch specific Kconfig files to enable stuff that is not shared. [...] The above suggestion is actually not exactly the best way to do it... First the naming.. A quick grep shows following usage today (in Kconfig files) ARCH_HAS 51 ARCH_SUPPORTS 4 HAVE_ARCH 7 ARCH_HAS is the clear winner. In the common Kconfig file do: config FOO depends on ARCH_HAS_FOO bool "bla bla" config ARCH_HAS_FOO def_bool n In the arch specific Kconfig file in a suitable place do: config SUITABLE_OPTION select ARCH_HAS_FOO The naming of ARCH_HAS_ is fixed and shall be: ARCH_HAS_<config option it will enable> Only a single line added pr. architecture. And we will end up with a (maybe even commented) list of trivial selects. - Yet another update : Moving to HAVE_* now. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 04:10:33 +08:00
#
# General architecture dependent options
#
config OPROFILE
tristate "OProfile system profiling"
depends on PROFILING
depends on HAVE_OPROFILE
select RING_BUFFER
select RING_BUFFER_ALLOW_SWAP
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
and applications.
If unsure, say N.
config OPROFILE_EVENT_MULTIPLEX
bool "OProfile multiplexing support (EXPERIMENTAL)"
default n
depends on OPROFILE && X86
help
The number of hardware counters is limited. The multiplexing
feature enables OProfile to gather more events than counters
are provided by the hardware. This is realized by switching
between events at an user specified time interval.
If unsure, say N.
config HAVE_OPROFILE
bool
config OPROFILE_NMI_TIMER
def_bool y
depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
config KPROBES
bool "Kprobes"
depends on MODULES
depends on HAVE_KPROBES
select KALLSYMS
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
jump label: Add work around to i386 gcc asm goto bug On i386 (not x86_64) early implementations of gcc would have a bug with asm goto causing it to produce code like the following: (This was noticed by Peter Zijlstra) 56 pushl 0 67 nopl jmp 0x6f popl jmp 0x8c 6f mov test je 0x8c 8c mov call *(%esp) The jump added in the asm goto skipped over the popl that matched the pushl 0, which lead up to a quick crash of the system when the jump was enabled. The nopl is defined in the asm goto () statement and when tracepoints are enabled, the nop changes to a jump to the label that was specified by the asm goto. asm goto is suppose to tell gcc that the code in the asm might jump to an external label. Here gcc obviously fails to make that work. The bug report for gcc is here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226 The bug only appears on x86 when not compiled with -maccumulate-outgoing-args. This option is always set on x86_64 and it is also the work around for a function graph tracer i386 bug. (See commit: 746357d6a526d6da9d89a2ec645b28406e959c2e) This explains why the bug only showed up on i386 when function graph tracer was not enabled. This patch now adds a CONFIG_JUMP_LABEL option that is default off instead of using jump labels by default. When jump labels are enabled, the -maccumulate-outgoing-args will be used (causing a slightly larger kernel image on i386). This option will exist until we have a way to detect if the gcc compiler in use is safe to use on all configurations without the work around. Note, there exists such a test, but for now we will keep the enabling of jump label as a manual option. Archs that know the compiler is safe with asm goto, may choose to select JUMP_LABEL and enable it by default. Reported-by: Ingo Molnar <mingo@elte.hu> Cause-discovered-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Baron <jbaron@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Miller <davem@davemloft.net> Cc: Richard Henderson <rth@redhat.com> LKML-Reference: <1288028746.3673.11.camel@laptop> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-30 00:33:43 +08:00
config JUMP_LABEL
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 15:31:31 +08:00
bool "Optimize very unlikely/likely branches"
jump label: Add work around to i386 gcc asm goto bug On i386 (not x86_64) early implementations of gcc would have a bug with asm goto causing it to produce code like the following: (This was noticed by Peter Zijlstra) 56 pushl 0 67 nopl jmp 0x6f popl jmp 0x8c 6f mov test je 0x8c 8c mov call *(%esp) The jump added in the asm goto skipped over the popl that matched the pushl 0, which lead up to a quick crash of the system when the jump was enabled. The nopl is defined in the asm goto () statement and when tracepoints are enabled, the nop changes to a jump to the label that was specified by the asm goto. asm goto is suppose to tell gcc that the code in the asm might jump to an external label. Here gcc obviously fails to make that work. The bug report for gcc is here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226 The bug only appears on x86 when not compiled with -maccumulate-outgoing-args. This option is always set on x86_64 and it is also the work around for a function graph tracer i386 bug. (See commit: 746357d6a526d6da9d89a2ec645b28406e959c2e) This explains why the bug only showed up on i386 when function graph tracer was not enabled. This patch now adds a CONFIG_JUMP_LABEL option that is default off instead of using jump labels by default. When jump labels are enabled, the -maccumulate-outgoing-args will be used (causing a slightly larger kernel image on i386). This option will exist until we have a way to detect if the gcc compiler in use is safe to use on all configurations without the work around. Note, there exists such a test, but for now we will keep the enabling of jump label as a manual option. Archs that know the compiler is safe with asm goto, may choose to select JUMP_LABEL and enable it by default. Reported-by: Ingo Molnar <mingo@elte.hu> Cause-discovered-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Baron <jbaron@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Miller <davem@davemloft.net> Cc: Richard Henderson <rth@redhat.com> LKML-Reference: <1288028746.3673.11.camel@laptop> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-30 00:33:43 +08:00
depends on HAVE_ARCH_JUMP_LABEL
help
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 15:31:31 +08:00
This option enables a transparent branch optimization that
makes certain almost-always-true or almost-always-false branch
conditions even cheaper to execute within the kernel.
Certain performance-sensitive kernel code, such as trace points,
scheduler functionality, networking code and KVM have such
branches and include support for this optimization technique.
jump label: Add work around to i386 gcc asm goto bug On i386 (not x86_64) early implementations of gcc would have a bug with asm goto causing it to produce code like the following: (This was noticed by Peter Zijlstra) 56 pushl 0 67 nopl jmp 0x6f popl jmp 0x8c 6f mov test je 0x8c 8c mov call *(%esp) The jump added in the asm goto skipped over the popl that matched the pushl 0, which lead up to a quick crash of the system when the jump was enabled. The nopl is defined in the asm goto () statement and when tracepoints are enabled, the nop changes to a jump to the label that was specified by the asm goto. asm goto is suppose to tell gcc that the code in the asm might jump to an external label. Here gcc obviously fails to make that work. The bug report for gcc is here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226 The bug only appears on x86 when not compiled with -maccumulate-outgoing-args. This option is always set on x86_64 and it is also the work around for a function graph tracer i386 bug. (See commit: 746357d6a526d6da9d89a2ec645b28406e959c2e) This explains why the bug only showed up on i386 when function graph tracer was not enabled. This patch now adds a CONFIG_JUMP_LABEL option that is default off instead of using jump labels by default. When jump labels are enabled, the -maccumulate-outgoing-args will be used (causing a slightly larger kernel image on i386). This option will exist until we have a way to detect if the gcc compiler in use is safe to use on all configurations without the work around. Note, there exists such a test, but for now we will keep the enabling of jump label as a manual option. Archs that know the compiler is safe with asm goto, may choose to select JUMP_LABEL and enable it by default. Reported-by: Ingo Molnar <mingo@elte.hu> Cause-discovered-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Baron <jbaron@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Miller <davem@davemloft.net> Cc: Richard Henderson <rth@redhat.com> LKML-Reference: <1288028746.3673.11.camel@laptop> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-30 00:33:43 +08:00
If it is detected that the compiler has support for "asm goto",
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 15:31:31 +08:00
the kernel will compile such branches with just a nop
instruction. When the condition flag is toggled to true, the
nop will be converted to a jump instruction to execute the
conditional block of instructions.
This technique lowers overhead and stress on the branch prediction
of the processor and generally makes the kernel faster. The update
of the condition is slower, but those are always very rare.
jump label: Add work around to i386 gcc asm goto bug On i386 (not x86_64) early implementations of gcc would have a bug with asm goto causing it to produce code like the following: (This was noticed by Peter Zijlstra) 56 pushl 0 67 nopl jmp 0x6f popl jmp 0x8c 6f mov test je 0x8c 8c mov call *(%esp) The jump added in the asm goto skipped over the popl that matched the pushl 0, which lead up to a quick crash of the system when the jump was enabled. The nopl is defined in the asm goto () statement and when tracepoints are enabled, the nop changes to a jump to the label that was specified by the asm goto. asm goto is suppose to tell gcc that the code in the asm might jump to an external label. Here gcc obviously fails to make that work. The bug report for gcc is here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226 The bug only appears on x86 when not compiled with -maccumulate-outgoing-args. This option is always set on x86_64 and it is also the work around for a function graph tracer i386 bug. (See commit: 746357d6a526d6da9d89a2ec645b28406e959c2e) This explains why the bug only showed up on i386 when function graph tracer was not enabled. This patch now adds a CONFIG_JUMP_LABEL option that is default off instead of using jump labels by default. When jump labels are enabled, the -maccumulate-outgoing-args will be used (causing a slightly larger kernel image on i386). This option will exist until we have a way to detect if the gcc compiler in use is safe to use on all configurations without the work around. Note, there exists such a test, but for now we will keep the enabling of jump label as a manual option. Archs that know the compiler is safe with asm goto, may choose to select JUMP_LABEL and enable it by default. Reported-by: Ingo Molnar <mingo@elte.hu> Cause-discovered-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Baron <jbaron@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Miller <davem@davemloft.net> Cc: Richard Henderson <rth@redhat.com> LKML-Reference: <1288028746.3673.11.camel@laptop> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-30 00:33:43 +08:00
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 15:31:31 +08:00
( On 32-bit x86, the necessary options added to the compiler
flags may increase the size of the kernel slightly. )
jump label: Add work around to i386 gcc asm goto bug On i386 (not x86_64) early implementations of gcc would have a bug with asm goto causing it to produce code like the following: (This was noticed by Peter Zijlstra) 56 pushl 0 67 nopl jmp 0x6f popl jmp 0x8c 6f mov test je 0x8c 8c mov call *(%esp) The jump added in the asm goto skipped over the popl that matched the pushl 0, which lead up to a quick crash of the system when the jump was enabled. The nopl is defined in the asm goto () statement and when tracepoints are enabled, the nop changes to a jump to the label that was specified by the asm goto. asm goto is suppose to tell gcc that the code in the asm might jump to an external label. Here gcc obviously fails to make that work. The bug report for gcc is here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46226 The bug only appears on x86 when not compiled with -maccumulate-outgoing-args. This option is always set on x86_64 and it is also the work around for a function graph tracer i386 bug. (See commit: 746357d6a526d6da9d89a2ec645b28406e959c2e) This explains why the bug only showed up on i386 when function graph tracer was not enabled. This patch now adds a CONFIG_JUMP_LABEL option that is default off instead of using jump labels by default. When jump labels are enabled, the -maccumulate-outgoing-args will be used (causing a slightly larger kernel image on i386). This option will exist until we have a way to detect if the gcc compiler in use is safe to use on all configurations without the work around. Note, there exists such a test, but for now we will keep the enabling of jump label as a manual option. Archs that know the compiler is safe with asm goto, may choose to select JUMP_LABEL and enable it by default. Reported-by: Ingo Molnar <mingo@elte.hu> Cause-discovered-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Baron <jbaron@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Miller <davem@davemloft.net> Cc: Richard Henderson <rth@redhat.com> LKML-Reference: <1288028746.3673.11.camel@laptop> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-30 00:33:43 +08:00
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 21:34:07 +08:00
config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 21:34:07 +08:00
depends on !PREEMPT
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
config UPROBES
bool "Transparent user-space probes (EXPERIMENTAL)"
depends on UPROBE_EVENT && PERF_EVENTS
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
default n
help
Uprobes is the user-space counterpart to kprobes: they
enable instrumentation applications (such as 'perf probe')
to establish unintrusive probes in user-space binaries and
libraries, by executing handler functions when the probes
are hit by user-space applications.
( These probes come in the form of single-byte breakpoints,
managed by the kernel and kept transparent to the probed
application. )
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
If in doubt, say "N".
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool
help
Some architectures are unable to perform unaligned accesses
without the use of get_unaligned/put_unaligned. Others are
unable to perform such accesses efficiently (e.g. trap on
unaligned access and require fixing it up in the exception
handler.)
This symbol should be selected by an architecture if it can
perform unaligned accesses efficiently to allow different
code paths to be selected for these cases. Some network
drivers, for example, could opt to not fix up alignment
problems with received packets if doing so would not help
much.
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
config HAVE_SYSCALL_WRAPPERS
bool
config KRETPROBES
def_bool y
depends on KPROBES && HAVE_KRETPROBES
config USER_RETURN_NOTIFIER
bool
depends on HAVE_USER_RETURN_NOTIFIER
help
Provide a kernel-internal notification when a cpu is about to
switch to user mode.
config HAVE_IOREMAP_PROT
bool
config HAVE_KPROBES
bool
config HAVE_KRETPROBES
bool
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 21:34:07 +08:00
config HAVE_OPTPROBES
bool
config HAVE_NMI_WATCHDOG
bool
#
# An arch should select this if it provides all these things:
#
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit}
# TIF_NOTIFY_RESUME calls tracehook_notify_resume()
# signal delivery calls tracehook_signal_handler()
#
config HAVE_ARCH_TRACEHOOK
bool
config HAVE_DMA_ATTRS
bool
config HAVE_DMA_CONTIGUOUS
bool
config USE_GENERIC_SMP_HELPERS
bool
smp: Provide generic idle thread allocation All SMP architectures have magic to fork the idle task and to store it for reusage when cpu hotplug is enabled. Provide a generic infrastructure for it. Create/reinit the idle thread for the cpu which is brought up in the generic code and hand the thread pointer to the architecture code via __cpu_up(). Note, that fork_idle() is called via a workqueue, because this guarantees that the idle thread does not get a reference to a user space VM. This can happen when the boot process did not bring up all possible cpus and a later cpu_up() is initiated via the sysfs interface. In that case fork_idle() would be called in the context of the user space task and take a reference on the user space VM. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Cc: x86@kernel.org Acked-by: Venkatesh Pallipadi <venki@google.com> Link: http://lkml.kernel.org/r/20120420124557.102478630@linutronix.de
2012-04-20 21:05:45 +08:00
config GENERIC_SMP_IDLE_THREAD
bool
# Select if arch init_task initializer is different to init/init_task.c
config ARCH_INIT_TASK
2012-05-03 17:02:48 +08:00
bool
# Select if arch has its private alloc_task_struct() function
config ARCH_TASK_STRUCT_ALLOCATOR
bool
# Select if arch has its private alloc_thread_info() function
config ARCH_THREAD_INFO_ALLOCATOR
bool
config HAVE_REGS_AND_STACK_ACCESS_API
bool
help
This symbol should be selected by an architecure if it supports
the API needed to access registers and stack entries from pt_regs,
declared in asm/ptrace.h
For example the kprobes-based event tracer needs this API.
config HAVE_CLK
bool
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_DMA_API_DEBUG
bool
config HAVE_HW_BREAKPOINT
bool
hw-breakpoints: Fix hardware breakpoints -> perf events dependency The kbuild's select command doesn't propagate through the config dependencies. Hence the current rules of hardware breakpoint's config can't ensure perf can never be disabled under us. We have: config X86 selects HAVE_HW_BREAKPOINTS config HAVE_HW_BREAKPOINTS select PERF_EVENTS config PERF_EVENTS [...] x86 will select the breakpoints but that won't propagate to perf events. The user can still disable the latter, but it is necessary for the breakpoints. What we need is: - x86 selects HAVE_HW_BREAKPOINTS and PERF_EVENTS - HAVE_HW_BREAKPOINTS depends on PERF_EVENTS so that we ensure PERF_EVENTS is enabled and frozen for x86. This fixes the following kind of build errors: In file included from arch/x86/kernel/hw_breakpoint.c:31: include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr': include/linux/hw_breakpoint.h:39: error: 'struct perf_event' has no member named 'attr' v2: Select also ANON_INODES from x86, required for perf Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Reported-by: Michal Marek <mmarek@suse.cz> Reported-by: Andrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1261010034-7786-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-17 08:33:54 +08:00
depends on PERF_EVENTS
config HAVE_MIXED_BREAKPOINTS_REGS
bool
depends on HAVE_HW_BREAKPOINT
help
Depending on the arch implementation of hardware breakpoints,
some of them have separate registers for data and instruction
breakpoints addresses, others have mixed registers to store
them but define the access type in a control register.
Select this option if your arch implements breakpoints under the
latter fashion.
config HAVE_USER_RETURN_NOTIFIER
bool
config HAVE_PERF_EVENTS_NMI
bool
help
System hardware can generate an NMI using the perf event
subsystem. Also has support for calculating CPU cycle events
to determine how many clock cycles in a given period.
perf: Unified API to record selective sets of arch registers This brings a new API to help the selective dump of registers on event sampling, and its implementation for x86 arch. Added HAVE_PERF_REGS config option to determine if the architecture provides perf registers ABI. The information about desired registers will be passed in u64 mask. It's up to the architecture to map the registers into the mask bits. For the x86 arch implementation, both 32 and 64 bit registers bits are defined within single enum to ensure 64 bit system can provide register dump for compat task if needed in the future. Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> [ Added missing linux/errno.h include ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 21:20:36 +08:00
config HAVE_PERF_REGS
bool
help
Support selective register dumps for perf events. This includes
bit-mapping of each registers and a unique architecture id.
2012-08-07 21:20:40 +08:00
config HAVE_PERF_USER_STACK_DUMP
bool
help
Support user stack dumps for perf event samples. This needs
access to the user stack pointer which is not unified across
architectures.
config HAVE_ARCH_JUMP_LABEL
bool
config HAVE_ARCH_MUTEX_CPU_RELAX
bool
config HAVE_RCU_TABLE_FREE
bool
Add Kconfig option ARCH_HAVE_NMI_SAFE_CMPXCHG cmpxchg() is widely used by lockless code, including NMI-safe lockless code. But on some architectures, the cmpxchg() implementation is not NMI-safe, on these architectures the lockless code may need a spin_trylock_irqsave() based implementation. This patch adds a Kconfig option: ARCH_HAVE_NMI_SAFE_CMPXCHG, so that NMI-safe lockless code can depend on it or provide different implementation according to it. On many architectures, cmpxchg is only NMI-safe for several specific operand sizes. So, ARCH_HAVE_NMI_SAFE_CMPXCHG define in this patch only guarantees cmpxchg is NMI-safe for sizeof(unsigned long). Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Richard Henderson <rth@twiddle.net> CC: Mikael Starvik <starvik@axis.com> Acked-by: David Howells <dhowells@redhat.com> CC: Yoshinori Sato <ysato@users.sourceforge.jp> CC: Tony Luck <tony.luck@intel.com> CC: Hirokazu Takata <takata@linux-m32r.org> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Michal Simek <monstr@monstr.eu> Acked-by: Ralf Baechle <ralf@linux-mips.org> CC: Kyle McMartin <kyle@mcmartin.ca> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: Chen Liqin <liqin.chen@sunplusct.com> CC: "David S. Miller" <davem@davemloft.net> CC: Ingo Molnar <mingo@redhat.com> CC: Chris Zankel <chris@zankel.net> Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 13:14:22 +08:00
config ARCH_HAVE_NMI_SAFE_CMPXCHG
bool
config HAVE_ALIGNED_STRUCT_PAGE
bool
help
This makes sure that struct pages are double word aligned and that
e.g. the SLUB allocator can perform double word atomic operations
on a struct page for better performance. However selecting this
might increase the size of a struct page by a word.
config HAVE_CMPXCHG_LOCAL
bool
config HAVE_CMPXCHG_DOUBLE
bool
config ARCH_WANT_IPC_PARSE_VERSION
bool
config ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
2012-03-16 01:13:38 +08:00
config ARCH_WANT_OLD_COMPAT_IPC
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
2012-03-16 01:13:38 +08:00
bool
config GENERIC_KERNEL_THREAD
bool
config GENERIC_KERNEL_EXECVE
bool
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-13 05:47:57 +08:00
config HAVE_ARCH_SECCOMP_FILTER
bool
help
ptrace,seccomp: Add PTRACE_SECCOMP support This change adds support for a new ptrace option, PTRACE_O_TRACESECCOMP, and a new return value for seccomp BPF programs, SECCOMP_RET_TRACE. When a tracer specifies the PTRACE_O_TRACESECCOMP ptrace option, the tracer will be notified, via PTRACE_EVENT_SECCOMP, for any syscall that results in a BPF program returning SECCOMP_RET_TRACE. The 16-bit SECCOMP_RET_DATA mask of the BPF program return value will be passed as the ptrace_message and may be retrieved using PTRACE_GETEVENTMSG. If the subordinate process is not using seccomp filter, then no system call notifications will occur even if the option is specified. If there is no tracer with PTRACE_O_TRACESECCOMP when SECCOMP_RET_TRACE is returned, the system call will not be executed and an -ENOSYS errno will be returned to userspace. This change adds a dependency on the system call slow path. Any future efforts to use the system call fast path for seccomp filter will need to address this restriction. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> v18: - rebase - comment fatal_signal check - acked-by - drop secure_computing_int comment v17: - ... v16: - update PT_TRACE_MASK to 0xbf4 so that STOP isn't clear on SETOPTIONS call (indan@nul.nu) [note PT_TRACE_MASK disappears in linux-next] v15: - add audit support for non-zero return codes - clean up style (indan@nul.nu) v14: - rebase/nochanges v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc (Brings back a change to ptrace.c and the masks.) v12: - rebase to linux-next - use ptrace_event and update arch/Kconfig to mention slow-path dependency - drop all tracehook changes and inclusion (oleg@redhat.com) v11: - invert the logic to just make it a PTRACE_SYSCALL accelerator (indan@nul.nu) v10: - moved to PTRACE_O_SECCOMP / PT_TRACE_SECCOMP v9: - n/a v8: - guarded PTRACE_SECCOMP use with an ifdef v7: - introduced Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-13 05:48:02 +08:00
An arch should select this symbol if it provides all of these things:
- syscall_get_arch()
- syscall_get_arguments()
- syscall_rollback()
- syscall_set_return_value()
ptrace,seccomp: Add PTRACE_SECCOMP support This change adds support for a new ptrace option, PTRACE_O_TRACESECCOMP, and a new return value for seccomp BPF programs, SECCOMP_RET_TRACE. When a tracer specifies the PTRACE_O_TRACESECCOMP ptrace option, the tracer will be notified, via PTRACE_EVENT_SECCOMP, for any syscall that results in a BPF program returning SECCOMP_RET_TRACE. The 16-bit SECCOMP_RET_DATA mask of the BPF program return value will be passed as the ptrace_message and may be retrieved using PTRACE_GETEVENTMSG. If the subordinate process is not using seccomp filter, then no system call notifications will occur even if the option is specified. If there is no tracer with PTRACE_O_TRACESECCOMP when SECCOMP_RET_TRACE is returned, the system call will not be executed and an -ENOSYS errno will be returned to userspace. This change adds a dependency on the system call slow path. Any future efforts to use the system call fast path for seccomp filter will need to address this restriction. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> v18: - rebase - comment fatal_signal check - acked-by - drop secure_computing_int comment v17: - ... v16: - update PT_TRACE_MASK to 0xbf4 so that STOP isn't clear on SETOPTIONS call (indan@nul.nu) [note PT_TRACE_MASK disappears in linux-next] v15: - add audit support for non-zero return codes - clean up style (indan@nul.nu) v14: - rebase/nochanges v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc (Brings back a change to ptrace.c and the masks.) v12: - rebase to linux-next - use ptrace_event and update arch/Kconfig to mention slow-path dependency - drop all tracehook changes and inclusion (oleg@redhat.com) v11: - invert the logic to just make it a PTRACE_SYSCALL accelerator (indan@nul.nu) v10: - moved to PTRACE_O_SECCOMP / PT_TRACE_SECCOMP v9: - n/a v8: - guarded PTRACE_SECCOMP use with an ifdef v7: - introduced Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-13 05:48:02 +08:00
- SIGSYS siginfo_t support
- secure_computing is called from a ptrace_event()-safe context
- secure_computing return value is checked and a return value of -1
results in the system call being skipped immediately.
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-13 05:47:57 +08:00
config SECCOMP_FILTER
def_bool y
depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET
help
Enable tasks to build secure computing environments defined
in terms of Berkeley Packet Filter programs which implement
task-defined system call filtering polices.
See Documentation/prctl/seccomp_filter.txt for details.
config HAVE_CONTEXT_TRACKING
bool
help
Provide kernel/user boundaries probes necessary for subsystems
that need it, such as userspace RCU extended quiescent state.
Syscalls need to be wrapped inside user_exit()-user_enter() through
the slow path using TIF_NOHZ flag. Exceptions handlers must be
wrapped as well. Irqs are already protected inside
rcu_irq_enter/rcu_irq_exit() but preemption or signal handling on
irq exit still need to be protected.
config HAVE_VIRT_CPU_ACCOUNTING
bool
config HAVE_IRQ_TIME_ACCOUNTING
bool
help
Archs need to ensure they use a high enough resolution clock to
support irq time accounting and then call enable_sched_clock_irqtime().
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
bool
2012-09-28 13:01:03 +08:00
config HAVE_MOD_ARCH_SPECIFIC
bool
help
The arch uses struct mod_arch_specific to store data. Many arches
just need a simple module loader without arch specific data - those
should not enable this.
config MODULES_USE_ELF_RELA
bool
help
Modules only use ELF RELA relocations. Modules with ELF REL
relocations will give an error.
config MODULES_USE_ELF_REL
bool
help
Modules only use ELF REL relocations. Modules with ELF RELA
relocations will give an error.
#
# ABI hall of shame
#
config CLONE_BACKWARDS
bool
help
Architecture has tls passed as the 4th argument of clone(2),
not the 5th one.
config CLONE_BACKWARDS2
bool
help
Architecture has the first two arguments of clone(2) swapped.
gcov: add gcov profiling infrastructure Enable the use of GCC's coverage testing tool gcov [1] with the Linux kernel. gcov may be useful for: * debugging (has this code been reached at all?) * test improvement (how do I change my test to cover these lines?) * minimizing kernel configurations (do I need this option if the associated code is never run?) The profiling patch incorporates the following changes: * change kbuild to include profiling flags * provide functions needed by profiling code * present profiling data as files in debugfs Note that on some architectures, enabling gcc's profiling option "-fprofile-arcs" for the entire kernel may trigger compile/link/ run-time problems, some of which are caused by toolchain bugs and others which require adjustment of architecture code. For this reason profiling the entire kernel is initially restricted to those architectures for which it is known to work without changes. This restriction can be lifted once an architecture has been tested and found compatible with gcc's profiling. Profiling of single files or directories is still available on all platforms (see config help text). [1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Li Wei <W.Li@Sun.COM> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com> Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 07:28:08 +08:00
source "kernel/gcov/Kconfig"