OpenCloudOS-Kernel/drivers/gpu/drm/armada/armada_crtc.c

1379 lines
38 KiB
C
Raw Normal View History

/*
* Copyright (C) 2012 Russell King
* Rewritten from the dovefb driver, and Armada510 manuals.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_plane_helper.h>
#include "armada_crtc.h"
#include "armada_drm.h"
#include "armada_fb.h"
#include "armada_gem.h"
#include "armada_hw.h"
#include "armada_trace.h"
struct armada_frame_work {
struct armada_plane_work work;
struct drm_pending_vblank_event *event;
struct armada_regs regs[4];
struct drm_framebuffer *old_fb;
};
enum csc_mode {
CSC_AUTO = 0,
CSC_YUV_CCIR601 = 1,
CSC_YUV_CCIR709 = 2,
CSC_RGB_COMPUTER = 1,
CSC_RGB_STUDIO = 2,
};
static const uint32_t armada_primary_formats[] = {
DRM_FORMAT_UYVY,
DRM_FORMAT_YUYV,
DRM_FORMAT_VYUY,
DRM_FORMAT_YVYU,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_RGB888,
DRM_FORMAT_BGR888,
DRM_FORMAT_ARGB1555,
DRM_FORMAT_ABGR1555,
DRM_FORMAT_RGB565,
DRM_FORMAT_BGR565,
};
/*
* A note about interlacing. Let's consider HDMI 1920x1080i.
* The timing parameters we have from X are:
* Hact HsyA HsyI Htot Vact VsyA VsyI Vtot
* 1920 2448 2492 2640 1080 1084 1094 1125
* Which get translated to:
* Hact HsyA HsyI Htot Vact VsyA VsyI Vtot
* 1920 2448 2492 2640 540 542 547 562
*
* This is how it is defined by CEA-861-D - line and pixel numbers are
* referenced to the rising edge of VSYNC and HSYNC. Total clocks per
* line: 2640. The odd frame, the first active line is at line 21, and
* the even frame, the first active line is 584.
*
* LN: 560 561 562 563 567 568 569
* DE: ~~~|____________________________//__________________________
* HSYNC: ____|~|_____|~|_____|~|_____|~|_//__|~|_____|~|_____|~|_____
* VSYNC: _________________________|~~~~~~//~~~~~~~~~~~~~~~|__________
* 22 blanking lines. VSYNC at 1320 (referenced to the HSYNC rising edge).
*
* LN: 1123 1124 1125 1 5 6 7
* DE: ~~~|____________________________//__________________________
* HSYNC: ____|~|_____|~|_____|~|_____|~|_//__|~|_____|~|_____|~|_____
* VSYNC: ____________________|~~~~~~~~~~~//~~~~~~~~~~|_______________
* 23 blanking lines
*
* The Armada LCD Controller line and pixel numbers are, like X timings,
* referenced to the top left of the active frame.
*
* So, translating these to our LCD controller:
* Odd frame, 563 total lines, VSYNC at line 543-548, pixel 1128.
* Even frame, 562 total lines, VSYNC at line 542-547, pixel 2448.
* Note: Vsync front porch remains constant!
*
* if (odd_frame) {
* vtotal = mode->crtc_vtotal + 1;
* vbackporch = mode->crtc_vsync_start - mode->crtc_vdisplay + 1;
* vhorizpos = mode->crtc_hsync_start - mode->crtc_htotal / 2
* } else {
* vtotal = mode->crtc_vtotal;
* vbackporch = mode->crtc_vsync_start - mode->crtc_vdisplay;
* vhorizpos = mode->crtc_hsync_start;
* }
* vfrontporch = mode->crtc_vtotal - mode->crtc_vsync_end;
*
* So, we need to reprogram these registers on each vsync event:
* LCD_SPU_V_PORCH, LCD_SPU_ADV_REG, LCD_SPUT_V_H_TOTAL
*
* Note: we do not use the frame done interrupts because these appear
* to happen too early, and lead to jitter on the display (presumably
* they occur at the end of the last active line, before the vsync back
* porch, which we're reprogramming.)
*/
void
armada_drm_crtc_update_regs(struct armada_crtc *dcrtc, struct armada_regs *regs)
{
while (regs->offset != ~0) {
void __iomem *reg = dcrtc->base + regs->offset;
uint32_t val;
val = regs->mask;
if (val != 0)
val &= readl_relaxed(reg);
writel_relaxed(val | regs->val, reg);
++regs;
}
}
#define dpms_blanked(dpms) ((dpms) != DRM_MODE_DPMS_ON)
static void armada_drm_crtc_update(struct armada_crtc *dcrtc)
{
uint32_t dumb_ctrl;
dumb_ctrl = dcrtc->cfg_dumb_ctrl;
if (!dpms_blanked(dcrtc->dpms))
dumb_ctrl |= CFG_DUMB_ENA;
/*
* When the dumb interface isn't in DUMB24_RGB888_0 mode, it might
* be using SPI or GPIO. If we set this to DUMB_BLANK, we will
* force LCD_D[23:0] to output blank color, overriding the GPIO or
* SPI usage. So leave it as-is unless in DUMB24_RGB888_0 mode.
*/
if (dpms_blanked(dcrtc->dpms) &&
(dumb_ctrl & DUMB_MASK) == DUMB24_RGB888_0) {
dumb_ctrl &= ~DUMB_MASK;
dumb_ctrl |= DUMB_BLANK;
}
/*
* The documentation doesn't indicate what the normal state of
* the sync signals are. Sebastian Hesselbart kindly probed
* these signals on his board to determine their state.
*
* The non-inverted state of the sync signals is active high.
* Setting these bits makes the appropriate signal active low.
*/
if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NCSYNC)
dumb_ctrl |= CFG_INV_CSYNC;
if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NHSYNC)
dumb_ctrl |= CFG_INV_HSYNC;
if (dcrtc->crtc.mode.flags & DRM_MODE_FLAG_NVSYNC)
dumb_ctrl |= CFG_INV_VSYNC;
if (dcrtc->dumb_ctrl != dumb_ctrl) {
dcrtc->dumb_ctrl = dumb_ctrl;
writel_relaxed(dumb_ctrl, dcrtc->base + LCD_SPU_DUMB_CTRL);
}
}
void armada_drm_plane_calc_addrs(u32 *addrs, struct drm_framebuffer *fb,
int x, int y)
{
u32 addr = drm_fb_obj(fb)->dev_addr;
int num_planes = fb->format->num_planes;
int i;
if (num_planes > 3)
num_planes = 3;
for (i = 0; i < num_planes; i++)
addrs[i] = addr + fb->offsets[i] + y * fb->pitches[i] +
x * fb->format->cpp[i];
for (; i < 3; i++)
addrs[i] = 0;
}
static unsigned armada_drm_crtc_calc_fb(struct drm_framebuffer *fb,
int x, int y, struct armada_regs *regs, bool interlaced)
{
unsigned pitch = fb->pitches[0];
u32 addrs[3], addr_odd, addr_even;
unsigned i = 0;
DRM_DEBUG_DRIVER("pitch %u x %d y %d bpp %d\n",
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 05:32:20 +08:00
pitch, x, y, fb->format->cpp[0] * 8);
armada_drm_plane_calc_addrs(addrs, fb, x, y);
addr_odd = addr_even = addrs[0];
if (interlaced) {
addr_even += pitch;
pitch *= 2;
}
/* write offset, base, and pitch */
armada_reg_queue_set(regs, i, addr_odd, LCD_CFG_GRA_START_ADDR0);
armada_reg_queue_set(regs, i, addr_even, LCD_CFG_GRA_START_ADDR1);
armada_reg_queue_mod(regs, i, pitch, 0xffff, LCD_CFG_GRA_PITCH);
return i;
}
static void armada_drm_plane_work_run(struct armada_crtc *dcrtc,
struct drm_plane *plane)
{
struct armada_plane *dplane = drm_to_armada_plane(plane);
struct armada_plane_work *work = xchg(&dplane->work, NULL);
/* Handle any pending frame work. */
if (work) {
work->fn(dcrtc, dplane, work);
drm_crtc_vblank_put(&dcrtc->crtc);
}
wake_up(&dplane->frame_wait);
}
int armada_drm_plane_work_queue(struct armada_crtc *dcrtc,
struct armada_plane *plane, struct armada_plane_work *work)
{
int ret;
ret = drm_crtc_vblank_get(&dcrtc->crtc);
if (ret) {
DRM_ERROR("failed to acquire vblank counter\n");
return ret;
}
ret = cmpxchg(&plane->work, NULL, work) ? -EBUSY : 0;
if (ret)
drm_crtc_vblank_put(&dcrtc->crtc);
return ret;
}
int armada_drm_plane_work_wait(struct armada_plane *plane, long timeout)
{
return wait_event_timeout(plane->frame_wait, !plane->work, timeout);
}
struct armada_plane_work *armada_drm_plane_work_cancel(
struct armada_crtc *dcrtc, struct armada_plane *plane)
{
struct armada_plane_work *work = xchg(&plane->work, NULL);
if (work)
drm_crtc_vblank_put(&dcrtc->crtc);
return work;
}
static int armada_drm_crtc_queue_frame_work(struct armada_crtc *dcrtc,
struct armada_frame_work *work)
{
struct armada_plane *plane = drm_to_armada_plane(dcrtc->crtc.primary);
return armada_drm_plane_work_queue(dcrtc, plane, &work->work);
}
static void armada_drm_crtc_complete_frame_work(struct armada_crtc *dcrtc,
struct armada_plane *plane, struct armada_plane_work *work)
{
struct armada_frame_work *fwork = container_of(work, struct armada_frame_work, work);
struct drm_device *dev = dcrtc->crtc.dev;
unsigned long flags;
spin_lock_irqsave(&dcrtc->irq_lock, flags);
armada_drm_crtc_update_regs(dcrtc, fwork->regs);
spin_unlock_irqrestore(&dcrtc->irq_lock, flags);
if (fwork->event) {
spin_lock_irqsave(&dev->event_lock, flags);
drm_crtc_send_vblank_event(&dcrtc->crtc, fwork->event);
spin_unlock_irqrestore(&dev->event_lock, flags);
}
/* Finally, queue the process-half of the cleanup. */
__armada_drm_queue_unref_work(dcrtc->crtc.dev, fwork->old_fb);
kfree(fwork);
}
static void armada_drm_crtc_finish_fb(struct armada_crtc *dcrtc,
struct drm_framebuffer *fb, bool force)
{
struct armada_frame_work *work;
if (!fb)
return;
if (force) {
/* Display is disabled, so just drop the old fb */
drm_framebuffer_unreference(fb);
return;
}
work = kmalloc(sizeof(*work), GFP_KERNEL);
if (work) {
int i = 0;
work->work.fn = armada_drm_crtc_complete_frame_work;
work->event = NULL;
work->old_fb = fb;
armada_reg_queue_end(work->regs, i);
if (armada_drm_crtc_queue_frame_work(dcrtc, work) == 0)
return;
kfree(work);
}
/*
* Oops - just drop the reference immediately and hope for
* the best. The worst that will happen is the buffer gets
* reused before it has finished being displayed.
*/
drm_framebuffer_unreference(fb);
}
static void armada_drm_vblank_off(struct armada_crtc *dcrtc)
{
/*
* Tell the DRM core that vblank IRQs aren't going to happen for
* a while. This cleans up any pending vblank events for us.
*/
drm_crtc_vblank_off(&dcrtc->crtc);
armada_drm_plane_work_run(dcrtc, dcrtc->crtc.primary);
}
void armada_drm_crtc_gamma_set(struct drm_crtc *crtc, u16 r, u16 g, u16 b,
int idx)
{
}
void armada_drm_crtc_gamma_get(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
int idx)
{
}
/* The mode_config.mutex will be held for this call */
static void armada_drm_crtc_dpms(struct drm_crtc *crtc, int dpms)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
if (dpms_blanked(dcrtc->dpms) != dpms_blanked(dpms)) {
if (dpms_blanked(dpms))
armada_drm_vblank_off(dcrtc);
else if (!IS_ERR(dcrtc->clk))
WARN_ON(clk_prepare_enable(dcrtc->clk));
dcrtc->dpms = dpms;
armada_drm_crtc_update(dcrtc);
if (!dpms_blanked(dpms))
drm_crtc_vblank_on(&dcrtc->crtc);
else if (!IS_ERR(dcrtc->clk))
clk_disable_unprepare(dcrtc->clk);
} else if (dcrtc->dpms != dpms) {
dcrtc->dpms = dpms;
}
}
/*
* Prepare for a mode set. Turn off overlay to ensure that we don't end
* up with the overlay size being bigger than the active screen size.
* We rely upon X refreshing this state after the mode set has completed.
*
* The mode_config.mutex will be held for this call
*/
static void armada_drm_crtc_prepare(struct drm_crtc *crtc)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct drm_plane *plane;
/*
* If we have an overlay plane associated with this CRTC, disable
* it before the modeset to avoid its coordinates being outside
* the new mode parameters.
*/
plane = dcrtc->plane;
if (plane)
drm_plane_force_disable(plane);
}
/* The mode_config.mutex will be held for this call */
static void armada_drm_crtc_commit(struct drm_crtc *crtc)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
if (dcrtc->dpms != DRM_MODE_DPMS_ON) {
dcrtc->dpms = DRM_MODE_DPMS_ON;
armada_drm_crtc_update(dcrtc);
}
}
/* The mode_config.mutex will be held for this call */
static bool armada_drm_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode, struct drm_display_mode *adj)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
int ret;
/* We can't do interlaced modes if we don't have the SPU_ADV_REG */
if (!dcrtc->variant->has_spu_adv_reg &&
adj->flags & DRM_MODE_FLAG_INTERLACE)
return false;
/* Check whether the display mode is possible */
ret = dcrtc->variant->compute_clock(dcrtc, adj, NULL);
if (ret)
return false;
return true;
}
static void armada_drm_crtc_irq(struct armada_crtc *dcrtc, u32 stat)
{
void __iomem *base = dcrtc->base;
struct drm_plane *ovl_plane;
if (stat & DMA_FF_UNDERFLOW)
DRM_ERROR("video underflow on crtc %u\n", dcrtc->num);
if (stat & GRA_FF_UNDERFLOW)
DRM_ERROR("graphics underflow on crtc %u\n", dcrtc->num);
if (stat & VSYNC_IRQ)
drm_crtc_handle_vblank(&dcrtc->crtc);
spin_lock(&dcrtc->irq_lock);
ovl_plane = dcrtc->plane;
if (ovl_plane)
armada_drm_plane_work_run(dcrtc, ovl_plane);
if (stat & GRA_FRAME_IRQ && dcrtc->interlaced) {
int i = stat & GRA_FRAME_IRQ0 ? 0 : 1;
uint32_t val;
writel_relaxed(dcrtc->v[i].spu_v_porch, base + LCD_SPU_V_PORCH);
writel_relaxed(dcrtc->v[i].spu_v_h_total,
base + LCD_SPUT_V_H_TOTAL);
val = readl_relaxed(base + LCD_SPU_ADV_REG);
val &= ~(ADV_VSYNC_L_OFF | ADV_VSYNC_H_OFF | ADV_VSYNCOFFEN);
val |= dcrtc->v[i].spu_adv_reg;
writel_relaxed(val, base + LCD_SPU_ADV_REG);
}
if (stat & DUMB_FRAMEDONE && dcrtc->cursor_update) {
writel_relaxed(dcrtc->cursor_hw_pos,
base + LCD_SPU_HWC_OVSA_HPXL_VLN);
writel_relaxed(dcrtc->cursor_hw_sz,
base + LCD_SPU_HWC_HPXL_VLN);
armada_updatel(CFG_HWC_ENA,
CFG_HWC_ENA | CFG_HWC_1BITMOD | CFG_HWC_1BITENA,
base + LCD_SPU_DMA_CTRL0);
dcrtc->cursor_update = false;
armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA);
}
spin_unlock(&dcrtc->irq_lock);
if (stat & GRA_FRAME_IRQ)
armada_drm_plane_work_run(dcrtc, dcrtc->crtc.primary);
}
static irqreturn_t armada_drm_irq(int irq, void *arg)
{
struct armada_crtc *dcrtc = arg;
u32 v, stat = readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR);
/*
* This is rediculous - rather than writing bits to clear, we
* have to set the actual status register value. This is racy.
*/
writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR);
trace_armada_drm_irq(&dcrtc->crtc, stat);
/* Mask out those interrupts we haven't enabled */
v = stat & dcrtc->irq_ena;
if (v & (VSYNC_IRQ|GRA_FRAME_IRQ|DUMB_FRAMEDONE)) {
armada_drm_crtc_irq(dcrtc, stat);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
/* These are locked by dev->vbl_lock */
void armada_drm_crtc_disable_irq(struct armada_crtc *dcrtc, u32 mask)
{
if (dcrtc->irq_ena & mask) {
dcrtc->irq_ena &= ~mask;
writel(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA);
}
}
void armada_drm_crtc_enable_irq(struct armada_crtc *dcrtc, u32 mask)
{
if ((dcrtc->irq_ena & mask) != mask) {
dcrtc->irq_ena |= mask;
writel(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA);
if (readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR) & mask)
writel(0, dcrtc->base + LCD_SPU_IRQ_ISR);
}
}
static uint32_t armada_drm_crtc_calculate_csc(struct armada_crtc *dcrtc)
{
struct drm_display_mode *adj = &dcrtc->crtc.mode;
uint32_t val = 0;
if (dcrtc->csc_yuv_mode == CSC_YUV_CCIR709)
val |= CFG_CSC_YUV_CCIR709;
if (dcrtc->csc_rgb_mode == CSC_RGB_STUDIO)
val |= CFG_CSC_RGB_STUDIO;
/*
* In auto mode, set the colorimetry, based upon the HDMI spec.
* 1280x720p, 1920x1080p and 1920x1080i use ITU709, others use
* ITU601. It may be more appropriate to set this depending on
* the source - but what if the graphic frame is YUV and the
* video frame is RGB?
*/
if ((adj->hdisplay == 1280 && adj->vdisplay == 720 &&
!(adj->flags & DRM_MODE_FLAG_INTERLACE)) ||
(adj->hdisplay == 1920 && adj->vdisplay == 1080)) {
if (dcrtc->csc_yuv_mode == CSC_AUTO)
val |= CFG_CSC_YUV_CCIR709;
}
/*
* We assume we're connected to a TV-like device, so the YUV->RGB
* conversion should produce a limited range. We should set this
* depending on the connectors attached to this CRTC, and what
* kind of device they report being connected.
*/
if (dcrtc->csc_rgb_mode == CSC_AUTO)
val |= CFG_CSC_RGB_STUDIO;
return val;
}
static void armada_drm_primary_set(struct drm_crtc *crtc,
struct drm_plane *plane, int x, int y)
{
struct armada_plane_state *state = &drm_to_armada_plane(plane)->state;
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct armada_regs regs[8];
bool interlaced = dcrtc->interlaced;
unsigned i;
u32 ctrl0;
i = armada_drm_crtc_calc_fb(plane->fb, x, y, regs, interlaced);
armada_reg_queue_set(regs, i, state->dst_yx, LCD_SPU_GRA_OVSA_HPXL_VLN);
armada_reg_queue_set(regs, i, state->src_hw, LCD_SPU_GRA_HPXL_VLN);
armada_reg_queue_set(regs, i, state->dst_hw, LCD_SPU_GZM_HPXL_VLN);
ctrl0 = state->ctrl0;
if (interlaced)
ctrl0 |= CFG_GRA_FTOGGLE;
armada_reg_queue_mod(regs, i, ctrl0, CFG_GRAFORMAT |
CFG_GRA_MOD(CFG_SWAPRB | CFG_SWAPUV |
CFG_SWAPYU | CFG_YUV2RGB) |
CFG_PALETTE_ENA | CFG_GRA_FTOGGLE,
LCD_SPU_DMA_CTRL0);
armada_reg_queue_end(regs, i);
armada_drm_crtc_update_regs(dcrtc, regs);
}
/* The mode_config.mutex will be held for this call */
static int armada_drm_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode, struct drm_display_mode *adj,
int x, int y, struct drm_framebuffer *old_fb)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct armada_regs regs[17];
uint32_t lm, rm, tm, bm, val, sclk;
unsigned long flags;
unsigned i;
bool interlaced;
drm_framebuffer_reference(crtc->primary->fb);
interlaced = !!(adj->flags & DRM_MODE_FLAG_INTERLACE);
val = CFG_GRA_ENA | CFG_GRA_HSMOOTH;
val |= CFG_GRA_FMT(drm_fb_to_armada_fb(dcrtc->crtc.primary->fb)->fmt);
val |= CFG_GRA_MOD(drm_fb_to_armada_fb(dcrtc->crtc.primary->fb)->mod);
if (drm_fb_to_armada_fb(dcrtc->crtc.primary->fb)->fmt > CFG_420)
val |= CFG_PALETTE_ENA;
drm_to_armada_plane(crtc->primary)->state.ctrl0 = val;
drm_to_armada_plane(crtc->primary)->state.src_hw =
drm_to_armada_plane(crtc->primary)->state.dst_hw =
adj->crtc_vdisplay << 16 | adj->crtc_hdisplay;
drm_to_armada_plane(crtc->primary)->state.dst_yx = 0;
i = 0;
rm = adj->crtc_hsync_start - adj->crtc_hdisplay;
lm = adj->crtc_htotal - adj->crtc_hsync_end;
bm = adj->crtc_vsync_start - adj->crtc_vdisplay;
tm = adj->crtc_vtotal - adj->crtc_vsync_end;
DRM_DEBUG_DRIVER("H: %d %d %d %d lm %d rm %d\n",
adj->crtc_hdisplay,
adj->crtc_hsync_start,
adj->crtc_hsync_end,
adj->crtc_htotal, lm, rm);
DRM_DEBUG_DRIVER("V: %d %d %d %d tm %d bm %d\n",
adj->crtc_vdisplay,
adj->crtc_vsync_start,
adj->crtc_vsync_end,
adj->crtc_vtotal, tm, bm);
/* Wait for pending flips to complete */
armada_drm_plane_work_wait(drm_to_armada_plane(dcrtc->crtc.primary),
MAX_SCHEDULE_TIMEOUT);
drm_crtc_vblank_off(crtc);
val = dcrtc->dumb_ctrl & ~CFG_DUMB_ENA;
if (val != dcrtc->dumb_ctrl) {
dcrtc->dumb_ctrl = val;
writel_relaxed(val, dcrtc->base + LCD_SPU_DUMB_CTRL);
}
/*
* If we are blanked, we would have disabled the clock. Re-enable
* it so that compute_clock() does the right thing.
*/
if (!IS_ERR(dcrtc->clk) && dpms_blanked(dcrtc->dpms))
WARN_ON(clk_prepare_enable(dcrtc->clk));
/* Now compute the divider for real */
dcrtc->variant->compute_clock(dcrtc, adj, &sclk);
/* Ensure graphic fifo is enabled */
armada_reg_queue_mod(regs, i, 0, CFG_PDWN64x66, LCD_SPU_SRAM_PARA1);
armada_reg_queue_set(regs, i, sclk, LCD_CFG_SCLK_DIV);
if (interlaced ^ dcrtc->interlaced) {
if (adj->flags & DRM_MODE_FLAG_INTERLACE)
drm_crtc_vblank_get(&dcrtc->crtc);
else
drm_crtc_vblank_put(&dcrtc->crtc);
dcrtc->interlaced = interlaced;
}
spin_lock_irqsave(&dcrtc->irq_lock, flags);
/* Even interlaced/progressive frame */
dcrtc->v[1].spu_v_h_total = adj->crtc_vtotal << 16 |
adj->crtc_htotal;
dcrtc->v[1].spu_v_porch = tm << 16 | bm;
val = adj->crtc_hsync_start;
dcrtc->v[1].spu_adv_reg = val << 20 | val | ADV_VSYNCOFFEN |
dcrtc->variant->spu_adv_reg;
if (interlaced) {
/* Odd interlaced frame */
dcrtc->v[0].spu_v_h_total = dcrtc->v[1].spu_v_h_total +
(1 << 16);
dcrtc->v[0].spu_v_porch = dcrtc->v[1].spu_v_porch + 1;
val = adj->crtc_hsync_start - adj->crtc_htotal / 2;
dcrtc->v[0].spu_adv_reg = val << 20 | val | ADV_VSYNCOFFEN |
dcrtc->variant->spu_adv_reg;
} else {
dcrtc->v[0] = dcrtc->v[1];
}
val = adj->crtc_vdisplay << 16 | adj->crtc_hdisplay;
armada_reg_queue_set(regs, i, val, LCD_SPU_V_H_ACTIVE);
armada_reg_queue_set(regs, i, (lm << 16) | rm, LCD_SPU_H_PORCH);
armada_reg_queue_set(regs, i, dcrtc->v[0].spu_v_porch, LCD_SPU_V_PORCH);
armada_reg_queue_set(regs, i, dcrtc->v[0].spu_v_h_total,
LCD_SPUT_V_H_TOTAL);
if (dcrtc->variant->has_spu_adv_reg) {
armada_reg_queue_mod(regs, i, dcrtc->v[0].spu_adv_reg,
ADV_VSYNC_L_OFF | ADV_VSYNC_H_OFF |
ADV_VSYNCOFFEN, LCD_SPU_ADV_REG);
}
val = adj->flags & DRM_MODE_FLAG_NVSYNC ? CFG_VSYNC_INV : 0;
armada_reg_queue_mod(regs, i, val, CFG_VSYNC_INV, LCD_SPU_DMA_CTRL1);
val = dcrtc->spu_iopad_ctrl | armada_drm_crtc_calculate_csc(dcrtc);
armada_reg_queue_set(regs, i, val, LCD_SPU_IOPAD_CONTROL);
armada_reg_queue_end(regs, i);
armada_drm_crtc_update_regs(dcrtc, regs);
armada_drm_primary_set(crtc, crtc->primary, x, y);
spin_unlock_irqrestore(&dcrtc->irq_lock, flags);
armada_drm_crtc_update(dcrtc);
drm_crtc_vblank_on(crtc);
armada_drm_crtc_finish_fb(dcrtc, old_fb, dpms_blanked(dcrtc->dpms));
return 0;
}
/* The mode_config.mutex will be held for this call */
static int armada_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct armada_regs regs[4];
unsigned i;
i = armada_drm_crtc_calc_fb(crtc->primary->fb, crtc->x, crtc->y, regs,
dcrtc->interlaced);
armada_reg_queue_end(regs, i);
/* Wait for pending flips to complete */
armada_drm_plane_work_wait(drm_to_armada_plane(dcrtc->crtc.primary),
MAX_SCHEDULE_TIMEOUT);
/* Take a reference to the new fb as we're using it */
drm_framebuffer_reference(crtc->primary->fb);
/* Update the base in the CRTC */
armada_drm_crtc_update_regs(dcrtc, regs);
/* Drop our previously held reference */
armada_drm_crtc_finish_fb(dcrtc, old_fb, dpms_blanked(dcrtc->dpms));
return 0;
}
void armada_drm_crtc_plane_disable(struct armada_crtc *dcrtc,
struct drm_plane *plane)
{
u32 sram_para1, dma_ctrl0_mask;
/*
* Drop our reference on any framebuffer attached to this plane.
* We don't need to NULL this out as drm_plane_force_disable(),
* and __setplane_internal() will do so for an overlay plane, and
* __drm_helper_disable_unused_functions() will do so for the
* primary plane.
*/
if (plane->fb)
drm_framebuffer_unreference(plane->fb);
/* Power down the Y/U/V FIFOs */
sram_para1 = CFG_PDWN16x66 | CFG_PDWN32x66;
/* Power down most RAMs and FIFOs if this is the primary plane */
if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
sram_para1 |= CFG_PDWN256x32 | CFG_PDWN256x24 | CFG_PDWN256x8 |
CFG_PDWN32x32 | CFG_PDWN64x66;
dma_ctrl0_mask = CFG_GRA_ENA;
} else {
dma_ctrl0_mask = CFG_DMA_ENA;
}
spin_lock_irq(&dcrtc->irq_lock);
armada_updatel(0, dma_ctrl0_mask, dcrtc->base + LCD_SPU_DMA_CTRL0);
spin_unlock_irq(&dcrtc->irq_lock);
armada_updatel(sram_para1, 0, dcrtc->base + LCD_SPU_SRAM_PARA1);
}
/* The mode_config.mutex will be held for this call */
static void armada_drm_crtc_disable(struct drm_crtc *crtc)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
armada_drm_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
armada_drm_crtc_plane_disable(dcrtc, crtc->primary);
}
static const struct drm_crtc_helper_funcs armada_crtc_helper_funcs = {
.dpms = armada_drm_crtc_dpms,
.prepare = armada_drm_crtc_prepare,
.commit = armada_drm_crtc_commit,
.mode_fixup = armada_drm_crtc_mode_fixup,
.mode_set = armada_drm_crtc_mode_set,
.mode_set_base = armada_drm_crtc_mode_set_base,
.disable = armada_drm_crtc_disable,
};
static void armada_load_cursor_argb(void __iomem *base, uint32_t *pix,
unsigned stride, unsigned width, unsigned height)
{
uint32_t addr;
unsigned y;
addr = SRAM_HWC32_RAM1;
for (y = 0; y < height; y++) {
uint32_t *p = &pix[y * stride];
unsigned x;
for (x = 0; x < width; x++, p++) {
uint32_t val = *p;
val = (val & 0xff00ff00) |
(val & 0x000000ff) << 16 |
(val & 0x00ff0000) >> 16;
writel_relaxed(val,
base + LCD_SPU_SRAM_WRDAT);
writel_relaxed(addr | SRAM_WRITE,
base + LCD_SPU_SRAM_CTRL);
readl_relaxed(base + LCD_SPU_HWC_OVSA_HPXL_VLN);
addr += 1;
if ((addr & 0x00ff) == 0)
addr += 0xf00;
if ((addr & 0x30ff) == 0)
addr = SRAM_HWC32_RAM2;
}
}
}
static void armada_drm_crtc_cursor_tran(void __iomem *base)
{
unsigned addr;
for (addr = 0; addr < 256; addr++) {
/* write the default value */
writel_relaxed(0x55555555, base + LCD_SPU_SRAM_WRDAT);
writel_relaxed(addr | SRAM_WRITE | SRAM_HWC32_TRAN,
base + LCD_SPU_SRAM_CTRL);
}
}
static int armada_drm_crtc_cursor_update(struct armada_crtc *dcrtc, bool reload)
{
uint32_t xoff, xscr, w = dcrtc->cursor_w, s;
uint32_t yoff, yscr, h = dcrtc->cursor_h;
uint32_t para1;
/*
* Calculate the visible width and height of the cursor,
* screen position, and the position in the cursor bitmap.
*/
if (dcrtc->cursor_x < 0) {
xoff = -dcrtc->cursor_x;
xscr = 0;
w -= min(xoff, w);
} else if (dcrtc->cursor_x + w > dcrtc->crtc.mode.hdisplay) {
xoff = 0;
xscr = dcrtc->cursor_x;
w = max_t(int, dcrtc->crtc.mode.hdisplay - dcrtc->cursor_x, 0);
} else {
xoff = 0;
xscr = dcrtc->cursor_x;
}
if (dcrtc->cursor_y < 0) {
yoff = -dcrtc->cursor_y;
yscr = 0;
h -= min(yoff, h);
} else if (dcrtc->cursor_y + h > dcrtc->crtc.mode.vdisplay) {
yoff = 0;
yscr = dcrtc->cursor_y;
h = max_t(int, dcrtc->crtc.mode.vdisplay - dcrtc->cursor_y, 0);
} else {
yoff = 0;
yscr = dcrtc->cursor_y;
}
/* On interlaced modes, the vertical cursor size must be halved */
s = dcrtc->cursor_w;
if (dcrtc->interlaced) {
s *= 2;
yscr /= 2;
h /= 2;
}
if (!dcrtc->cursor_obj || !h || !w) {
spin_lock_irq(&dcrtc->irq_lock);
armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA);
dcrtc->cursor_update = false;
armada_updatel(0, CFG_HWC_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0);
spin_unlock_irq(&dcrtc->irq_lock);
return 0;
}
para1 = readl_relaxed(dcrtc->base + LCD_SPU_SRAM_PARA1);
armada_updatel(CFG_CSB_256x32, CFG_CSB_256x32 | CFG_PDWN256x32,
dcrtc->base + LCD_SPU_SRAM_PARA1);
/*
* Initialize the transparency if the SRAM was powered down.
* We must also reload the cursor data as well.
*/
if (!(para1 & CFG_CSB_256x32)) {
armada_drm_crtc_cursor_tran(dcrtc->base);
reload = true;
}
if (dcrtc->cursor_hw_sz != (h << 16 | w)) {
spin_lock_irq(&dcrtc->irq_lock);
armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA);
dcrtc->cursor_update = false;
armada_updatel(0, CFG_HWC_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0);
spin_unlock_irq(&dcrtc->irq_lock);
reload = true;
}
if (reload) {
struct armada_gem_object *obj = dcrtc->cursor_obj;
uint32_t *pix;
/* Set the top-left corner of the cursor image */
pix = obj->addr;
pix += yoff * s + xoff;
armada_load_cursor_argb(dcrtc->base, pix, s, w, h);
}
/* Reload the cursor position, size and enable in the IRQ handler */
spin_lock_irq(&dcrtc->irq_lock);
dcrtc->cursor_hw_pos = yscr << 16 | xscr;
dcrtc->cursor_hw_sz = h << 16 | w;
dcrtc->cursor_update = true;
armada_drm_crtc_enable_irq(dcrtc, DUMB_FRAMEDONE_ENA);
spin_unlock_irq(&dcrtc->irq_lock);
return 0;
}
static void cursor_update(void *data)
{
armada_drm_crtc_cursor_update(data, true);
}
static int armada_drm_crtc_cursor_set(struct drm_crtc *crtc,
struct drm_file *file, uint32_t handle, uint32_t w, uint32_t h)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct armada_gem_object *obj = NULL;
int ret;
/* If no cursor support, replicate drm's return value */
if (!dcrtc->variant->has_spu_adv_reg)
return -ENXIO;
if (handle && w > 0 && h > 0) {
/* maximum size is 64x32 or 32x64 */
if (w > 64 || h > 64 || (w > 32 && h > 32))
return -ENOMEM;
obj = armada_gem_object_lookup(file, handle);
if (!obj)
return -ENOENT;
/* Must be a kernel-mapped object */
if (!obj->addr) {
drm_gem_object_unreference_unlocked(&obj->obj);
return -EINVAL;
}
if (obj->obj.size < w * h * 4) {
DRM_ERROR("buffer is too small\n");
drm_gem_object_unreference_unlocked(&obj->obj);
return -ENOMEM;
}
}
if (dcrtc->cursor_obj) {
dcrtc->cursor_obj->update = NULL;
dcrtc->cursor_obj->update_data = NULL;
drm_gem_object_unreference_unlocked(&dcrtc->cursor_obj->obj);
}
dcrtc->cursor_obj = obj;
dcrtc->cursor_w = w;
dcrtc->cursor_h = h;
ret = armada_drm_crtc_cursor_update(dcrtc, true);
if (obj) {
obj->update_data = dcrtc;
obj->update = cursor_update;
}
return ret;
}
static int armada_drm_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
int ret;
/* If no cursor support, replicate drm's return value */
if (!dcrtc->variant->has_spu_adv_reg)
return -EFAULT;
dcrtc->cursor_x = x;
dcrtc->cursor_y = y;
ret = armada_drm_crtc_cursor_update(dcrtc, false);
return ret;
}
static void armada_drm_crtc_destroy(struct drm_crtc *crtc)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct armada_private *priv = crtc->dev->dev_private;
if (dcrtc->cursor_obj)
drm_gem_object_unreference_unlocked(&dcrtc->cursor_obj->obj);
priv->dcrtc[dcrtc->num] = NULL;
drm_crtc_cleanup(&dcrtc->crtc);
if (!IS_ERR(dcrtc->clk))
clk_disable_unprepare(dcrtc->clk);
writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ENA);
of_node_put(dcrtc->crtc.port);
kfree(dcrtc);
}
/*
* The mode_config lock is held here, to prevent races between this
* and a mode_set.
*/
static int armada_drm_crtc_page_flip(struct drm_crtc *crtc,
struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, uint32_t page_flip_flags)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
struct armada_frame_work *work;
unsigned i;
int ret;
/* We don't support changing the pixel format */
drm: Replace 'format->format' comparisons to just 'format' comparisons Rather than compare the format u32s of two format infos, we can direclty compare the format info pointers themselves. Noramlly all the ->format pointers all point to somwehere in the big array, so this is a valid way to test for equality. Also drivers may want to point ->format at a private format info struct instead (eg. for special compressed formats with extra planes), so just comparing the pixel format values wouldn't necessaritly even work. But comparing the pointers will also take care of that case. @@ struct drm_framebuffer *a; struct drm_framebuffer *b; @@ ( - a->format->format != b->format->format + a->format != b->format | - a->format->format == b->format->format + a->format == b->format ) @@ struct drm_plane_state *a; struct drm_plane_state *b; @@ ( - a->fb->format->format != b->fb->format->format + a->fb->format != b->fb->format | - a->fb->format->format == b->fb->format->format + a->fb->format == b->fb->format ) @@ struct drm_crtc *crtc; struct drm_framebuffer *x; @@ ( - crtc->primary->fb->format->format != x->format->format + crtc->primary->fb->format != x->format | - x->format->format != crtc->primary->fb->format->format + x->format != crtc->primary->fb->format ) @@ struct drm_mode_set *set; @@ - set->fb->format->format != set->crtc->primary->fb->format->format + set->fb->format != set->crtc->primary->fb->format Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-35-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-11-19 03:53:10 +08:00
if (fb->format != crtc->primary->fb->format)
return -EINVAL;
work = kmalloc(sizeof(*work), GFP_KERNEL);
if (!work)
return -ENOMEM;
work->work.fn = armada_drm_crtc_complete_frame_work;
work->event = event;
work->old_fb = dcrtc->crtc.primary->fb;
i = armada_drm_crtc_calc_fb(fb, crtc->x, crtc->y, work->regs,
dcrtc->interlaced);
armada_reg_queue_end(work->regs, i);
/*
* Ensure that we hold a reference on the new framebuffer.
* This has to match the behaviour in mode_set.
*/
drm_framebuffer_reference(fb);
ret = armada_drm_crtc_queue_frame_work(dcrtc, work);
if (ret) {
/* Undo our reference above */
drm_framebuffer_unreference(fb);
kfree(work);
return ret;
}
/*
* Don't take a reference on the new framebuffer;
* drm_mode_page_flip_ioctl() has already grabbed a reference and
* will _not_ drop that reference on successful return from this
* function. Simply mark this new framebuffer as the current one.
*/
dcrtc->crtc.primary->fb = fb;
/*
* Finally, if the display is blanked, we won't receive an
* interrupt, so complete it now.
*/
if (dpms_blanked(dcrtc->dpms))
armada_drm_plane_work_run(dcrtc, dcrtc->crtc.primary);
return 0;
}
static int
armada_drm_crtc_set_property(struct drm_crtc *crtc,
struct drm_property *property, uint64_t val)
{
struct armada_private *priv = crtc->dev->dev_private;
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
bool update_csc = false;
if (property == priv->csc_yuv_prop) {
dcrtc->csc_yuv_mode = val;
update_csc = true;
} else if (property == priv->csc_rgb_prop) {
dcrtc->csc_rgb_mode = val;
update_csc = true;
}
if (update_csc) {
uint32_t val;
val = dcrtc->spu_iopad_ctrl |
armada_drm_crtc_calculate_csc(dcrtc);
writel_relaxed(val, dcrtc->base + LCD_SPU_IOPAD_CONTROL);
}
return 0;
}
static const struct drm_crtc_funcs armada_crtc_funcs = {
.cursor_set = armada_drm_crtc_cursor_set,
.cursor_move = armada_drm_crtc_cursor_move,
.destroy = armada_drm_crtc_destroy,
.set_config = drm_crtc_helper_set_config,
.page_flip = armada_drm_crtc_page_flip,
.set_property = armada_drm_crtc_set_property,
};
static const struct drm_plane_funcs armada_primary_plane_funcs = {
.update_plane = drm_primary_helper_update,
.disable_plane = drm_primary_helper_disable,
.destroy = drm_primary_helper_destroy,
};
int armada_drm_plane_init(struct armada_plane *plane)
{
init_waitqueue_head(&plane->frame_wait);
return 0;
}
static struct drm_prop_enum_list armada_drm_csc_yuv_enum_list[] = {
{ CSC_AUTO, "Auto" },
{ CSC_YUV_CCIR601, "CCIR601" },
{ CSC_YUV_CCIR709, "CCIR709" },
};
static struct drm_prop_enum_list armada_drm_csc_rgb_enum_list[] = {
{ CSC_AUTO, "Auto" },
{ CSC_RGB_COMPUTER, "Computer system" },
{ CSC_RGB_STUDIO, "Studio" },
};
static int armada_drm_crtc_create_properties(struct drm_device *dev)
{
struct armada_private *priv = dev->dev_private;
if (priv->csc_yuv_prop)
return 0;
priv->csc_yuv_prop = drm_property_create_enum(dev, 0,
"CSC_YUV", armada_drm_csc_yuv_enum_list,
ARRAY_SIZE(armada_drm_csc_yuv_enum_list));
priv->csc_rgb_prop = drm_property_create_enum(dev, 0,
"CSC_RGB", armada_drm_csc_rgb_enum_list,
ARRAY_SIZE(armada_drm_csc_rgb_enum_list));
if (!priv->csc_yuv_prop || !priv->csc_rgb_prop)
return -ENOMEM;
return 0;
}
static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
struct resource *res, int irq, const struct armada_variant *variant,
struct device_node *port)
{
struct armada_private *priv = drm->dev_private;
struct armada_crtc *dcrtc;
struct armada_plane *primary;
void __iomem *base;
int ret;
ret = armada_drm_crtc_create_properties(drm);
if (ret)
return ret;
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux Pull DRM updates from Dave Airlie: "Like all good pull reqs this ends with a revert, so it must mean we tested it, [ Ed. That's _one_ way of looking at it ] This pull is missing nouveau, Ben has been stuck trying to track down a very longstanding bug that revealed itself due to some other changes. I've asked him to send you a direct pull request for nouveau once he cleans things up. I'm away until Monday so don't want to delay things, you can make a decision on that when he sends it, I have my phone so I can ack things just not really merge much. It has one trivial conflict with your tree in armada_drv.c, and also the pull request contains some component changes that are already in your tree, the base tree from Russell went via Greg's tree already, but some stuff still shows up in here that doesn't when I merge my tree into yours. Otherwise all pretty standard graphics fare, one new driver and changes all over the place. New drivers: - sti kms driver for STMicroelectronics chipsets stih416 and stih407. core: - lots of cleanups to the drm core - DP MST helper code merged - universal cursor planes. - render nodes enabled by default panel: - better panel interfaces - new panel support - non-continuous cock advertising ability ttm: - shrinker fixes i915: - hopefully ditched UMS support - runtime pm fixes - psr tracking and locking - now enabled by default - userptr fixes - backlight brightness fixes - MST support merged - runtime PM for dpms - primary planes locking fixes - gen8 hw semaphore support - fbc fixes - runtime PM on SOix sleep state hw. - mmio base page flipping - lots of vlv/chv fixes. - universal cursor planes radeon: - Hawaii fixes - display scalar support for non-fixed mode displays - new firmware format support - dpm on more asics by default - GPUVM improvements - uncached and wc GTT buffers - BOs > visible VRAM exynos: - i80 interface support - module auto-loading - ipp driver consolidated. armada: - irq handling in crtc layer only - crtc renumbering - add component support - DT interaction changes. tegra: - load as module fixes - eDP bpp and sync polarity fixed - DSI non-continuous clock mode support - better support for importing buffers from nouveau msm: - mdp5/adq8084 v1.3 hw enablement - devicetree clk changse - ifc6410 board working tda998x: - component support - DT documentation update vmwgfx: - fix compat shader namespace" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (551 commits) Revert "drm: drop redundant drm_file->is_master" drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible ...
2014-08-08 08:36:12 +08:00
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
dcrtc = kzalloc(sizeof(*dcrtc), GFP_KERNEL);
if (!dcrtc) {
DRM_ERROR("failed to allocate Armada crtc\n");
return -ENOMEM;
}
if (dev != drm->dev)
dev_set_drvdata(dev, dcrtc);
dcrtc->variant = variant;
dcrtc->base = base;
dcrtc->num = drm->mode_config.num_crtc;
dcrtc->clk = ERR_PTR(-EINVAL);
dcrtc->csc_yuv_mode = CSC_AUTO;
dcrtc->csc_rgb_mode = CSC_AUTO;
dcrtc->cfg_dumb_ctrl = DUMB24_RGB888_0;
dcrtc->spu_iopad_ctrl = CFG_VSCALE_LN_EN | CFG_IOPAD_DUMB24;
spin_lock_init(&dcrtc->irq_lock);
dcrtc->irq_ena = CLEAN_SPU_IRQ_ISR;
/* Initialize some registers which we don't otherwise set */
writel_relaxed(0x00000001, dcrtc->base + LCD_CFG_SCLK_DIV);
writel_relaxed(0x00000000, dcrtc->base + LCD_SPU_BLANKCOLOR);
writel_relaxed(dcrtc->spu_iopad_ctrl,
dcrtc->base + LCD_SPU_IOPAD_CONTROL);
writel_relaxed(0x00000000, dcrtc->base + LCD_SPU_SRAM_PARA0);
writel_relaxed(CFG_PDWN256x32 | CFG_PDWN256x24 | CFG_PDWN256x8 |
CFG_PDWN32x32 | CFG_PDWN16x66 | CFG_PDWN32x66 |
CFG_PDWN64x66, dcrtc->base + LCD_SPU_SRAM_PARA1);
writel_relaxed(0x2032ff81, dcrtc->base + LCD_SPU_DMA_CTRL1);
writel_relaxed(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA);
writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR);
ret = devm_request_irq(dev, irq, armada_drm_irq, 0, "armada_drm_crtc",
dcrtc);
if (ret < 0) {
kfree(dcrtc);
return ret;
}
if (dcrtc->variant->init) {
ret = dcrtc->variant->init(dcrtc, dev);
if (ret) {
kfree(dcrtc);
return ret;
}
}
/* Ensure AXI pipeline is enabled */
armada_updatel(CFG_ARBFAST_ENA, 0, dcrtc->base + LCD_SPU_DMA_CTRL0);
priv->dcrtc[dcrtc->num] = dcrtc;
dcrtc->crtc.port = port;
primary = kzalloc(sizeof(*primary), GFP_KERNEL);
if (!primary)
return -ENOMEM;
ret = armada_drm_plane_init(primary);
if (ret) {
kfree(primary);
return ret;
}
ret = drm_universal_plane_init(drm, &primary->base, 0,
&armada_primary_plane_funcs,
armada_primary_formats,
ARRAY_SIZE(armada_primary_formats),
drm: Pass 'name' to drm_universal_plane_init() Done with coccinelle for the most part. It choked on msm/mdp/mdp5/mdp5_plane.c like so: "BAD:!!!!! enum drm_plane_type type;" No idea how to deal with that, so I just fixed that up by hand. Also it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_plane_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ typedef uint32_t; identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5, E6, E7; @@ drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7 + ,NULL ) v2: Split crtc and plane changes apart Pass NUL for no-name instead of "" Leave drm_plane_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-09 22:19:55 +08:00
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
kfree(primary);
return ret;
}
ret = drm_crtc_init_with_planes(drm, &dcrtc->crtc, &primary->base, NULL,
2015-12-09 22:19:31 +08:00
&armada_crtc_funcs, NULL);
if (ret)
goto err_crtc_init;
drm_crtc_helper_add(&dcrtc->crtc, &armada_crtc_helper_funcs);
drm_object_attach_property(&dcrtc->crtc.base, priv->csc_yuv_prop,
dcrtc->csc_yuv_mode);
drm_object_attach_property(&dcrtc->crtc.base, priv->csc_rgb_prop,
dcrtc->csc_rgb_mode);
return armada_overlay_plane_create(drm, 1 << dcrtc->num);
err_crtc_init:
primary->base.funcs->destroy(&primary->base);
return ret;
}
static int
armada_lcd_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *drm = data;
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
int irq = platform_get_irq(pdev, 0);
const struct armada_variant *variant;
struct device_node *port = NULL;
if (irq < 0)
return irq;
if (!dev->of_node) {
const struct platform_device_id *id;
id = platform_get_device_id(pdev);
if (!id)
return -ENXIO;
variant = (const struct armada_variant *)id->driver_data;
} else {
const struct of_device_id *match;
struct device_node *np, *parent = dev->of_node;
match = of_match_device(dev->driver->of_match_table, dev);
if (!match)
return -ENXIO;
np = of_get_child_by_name(parent, "ports");
if (np)
parent = np;
port = of_get_child_by_name(parent, "port");
of_node_put(np);
if (!port) {
dev_err(dev, "no port node found in %s\n",
parent->full_name);
return -ENXIO;
}
variant = match->data;
}
return armada_drm_crtc_create(drm, dev, res, irq, variant, port);
}
static void
armada_lcd_unbind(struct device *dev, struct device *master, void *data)
{
struct armada_crtc *dcrtc = dev_get_drvdata(dev);
armada_drm_crtc_destroy(&dcrtc->crtc);
}
static const struct component_ops armada_lcd_ops = {
.bind = armada_lcd_bind,
.unbind = armada_lcd_unbind,
};
static int armada_lcd_probe(struct platform_device *pdev)
{
return component_add(&pdev->dev, &armada_lcd_ops);
}
static int armada_lcd_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &armada_lcd_ops);
return 0;
}
static struct of_device_id armada_lcd_of_match[] = {
{
.compatible = "marvell,dove-lcd",
.data = &armada510_ops,
},
{}
};
MODULE_DEVICE_TABLE(of, armada_lcd_of_match);
static const struct platform_device_id armada_lcd_platform_ids[] = {
{
.name = "armada-lcd",
.driver_data = (unsigned long)&armada510_ops,
}, {
.name = "armada-510-lcd",
.driver_data = (unsigned long)&armada510_ops,
},
{ },
};
MODULE_DEVICE_TABLE(platform, armada_lcd_platform_ids);
struct platform_driver armada_lcd_platform_driver = {
.probe = armada_lcd_probe,
.remove = armada_lcd_remove,
.driver = {
.name = "armada-lcd",
.owner = THIS_MODULE,
.of_match_table = armada_lcd_of_match,
},
.id_table = armada_lcd_platform_ids,
};