OpenCloudOS-Kernel/drivers/net/phy/fixed_phy.c

377 lines
8.7 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* Copyright (c) 2006-2007 MontaVista Software, Inc.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/err.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/gpio/consumer.h>
#include <linux/seqlock.h>
#include <linux/idr.h>
#include <linux/netdevice.h>
#include "swphy.h"
struct fixed_mdio_bus {
struct mii_bus *mii_bus;
struct list_head phys;
};
struct fixed_phy {
int addr;
struct phy_device *phydev;
seqcount_t seqcount;
struct fixed_phy_status status;
bool no_carrier;
int (*link_update)(struct net_device *, struct fixed_phy_status *);
struct list_head node;
struct gpio_desc *link_gpiod;
};
static struct platform_device *pdev;
static struct fixed_mdio_bus platform_fmb = {
.phys = LIST_HEAD_INIT(platform_fmb.phys),
};
int fixed_phy_change_carrier(struct net_device *dev, bool new_carrier)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct phy_device *phydev = dev->phydev;
struct fixed_phy *fp;
if (!phydev || !phydev->mdio.bus)
return -EINVAL;
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->addr == phydev->mdio.addr) {
fp->no_carrier = !new_carrier;
return 0;
}
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(fixed_phy_change_carrier);
static void fixed_phy_update(struct fixed_phy *fp)
{
if (!fp->no_carrier && fp->link_gpiod)
fp->status.link = !!gpiod_get_value_cansleep(fp->link_gpiod);
}
static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
{
struct fixed_mdio_bus *fmb = bus->priv;
struct fixed_phy *fp;
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->addr == phy_addr) {
struct fixed_phy_status state;
int s;
do {
s = read_seqcount_begin(&fp->seqcount);
fp->status.link = !fp->no_carrier;
/* Issue callback if user registered it. */
if (fp->link_update)
fp->link_update(fp->phydev->attached_dev,
&fp->status);
/* Check the GPIO for change in status */
fixed_phy_update(fp);
state = fp->status;
} while (read_seqcount_retry(&fp->seqcount, s));
return swphy_read_reg(reg_num, &state);
}
}
return 0xFFFF;
}
static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num,
u16 val)
{
return 0;
}
/*
* If something weird is required to be done with link/speed,
* network driver is able to assign a function to implement this.
* May be useful for PHY's that need to be software-driven.
*/
int fixed_phy_set_link_update(struct phy_device *phydev,
int (*link_update)(struct net_device *,
struct fixed_phy_status *))
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp;
if (!phydev || !phydev->mdio.bus)
return -EINVAL;
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->addr == phydev->mdio.addr) {
fp->link_update = link_update;
fp->phydev = phydev;
return 0;
}
}
return -ENOENT;
}
EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
static int fixed_phy_add_gpiod(unsigned int irq, int phy_addr,
struct fixed_phy_status *status,
struct gpio_desc *gpiod)
{
int ret;
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp;
ret = swphy_validate_state(status);
if (ret < 0)
return ret;
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
if (!fp)
return -ENOMEM;
seqcount_init(&fp->seqcount);
if (irq != PHY_POLL)
fmb->mii_bus->irq[phy_addr] = irq;
fp->addr = phy_addr;
fp->status = *status;
fp->link_gpiod = gpiod;
fixed_phy_update(fp);
list_add_tail(&fp->node, &fmb->phys);
return 0;
}
int fixed_phy_add(unsigned int irq, int phy_addr,
struct fixed_phy_status *status) {
return fixed_phy_add_gpiod(irq, phy_addr, status, NULL);
}
EXPORT_SYMBOL_GPL(fixed_phy_add);
static DEFINE_IDA(phy_fixed_ida);
static void fixed_phy_del(int phy_addr)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp, *tmp;
list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
if (fp->addr == phy_addr) {
list_del(&fp->node);
if (fp->link_gpiod)
gpiod_put(fp->link_gpiod);
kfree(fp);
ida_simple_remove(&phy_fixed_ida, phy_addr);
return;
}
}
}
#ifdef CONFIG_OF_GPIO
static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
{
struct device_node *fixed_link_node;
struct gpio_desc *gpiod;
if (!np)
return NULL;
fixed_link_node = of_get_child_by_name(np, "fixed-link");
if (!fixed_link_node)
return NULL;
/*
* As the fixed link is just a device tree node without any
* Linux device associated with it, we simply have obtain
* the GPIO descriptor from the device tree like this.
*/
gpiod = gpiod_get_from_of_node(fixed_link_node, "link-gpios", 0,
GPIOD_IN, "mdio");
of_node_put(fixed_link_node);
if (IS_ERR(gpiod)) {
if (PTR_ERR(gpiod) == -EPROBE_DEFER)
return gpiod;
pr_err("error getting GPIO for fixed link %pOF, proceed without\n",
fixed_link_node);
gpiod = NULL;
}
return gpiod;
}
#else
static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
{
return NULL;
}
#endif
struct phy_device *fixed_phy_register(unsigned int irq,
struct fixed_phy_status *status,
struct device_node *np)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct gpio_desc *gpiod = NULL;
struct phy_device *phy;
int phy_addr;
int ret;
if (!fmb->mii_bus || fmb->mii_bus->state != MDIOBUS_REGISTERED)
return ERR_PTR(-EPROBE_DEFER);
/* Check if we have a GPIO associated with this fixed phy */
gpiod = fixed_phy_get_gpiod(np);
if (IS_ERR(gpiod))
return ERR_CAST(gpiod);
/* Get the next available PHY address, up to PHY_MAX_ADDR */
phy_addr = ida_simple_get(&phy_fixed_ida, 0, PHY_MAX_ADDR, GFP_KERNEL);
if (phy_addr < 0)
return ERR_PTR(phy_addr);
ret = fixed_phy_add_gpiod(irq, phy_addr, status, gpiod);
if (ret < 0) {
ida_simple_remove(&phy_fixed_ida, phy_addr);
return ERR_PTR(ret);
}
phy = get_phy_device(fmb->mii_bus, phy_addr, false);
if (IS_ERR(phy)) {
fixed_phy_del(phy_addr);
return ERR_PTR(-EINVAL);
}
/* propagate the fixed link values to struct phy_device */
phy->link = status->link;
if (status->link) {
phy->speed = status->speed;
phy->duplex = status->duplex;
phy->pause = status->pause;
phy->asym_pause = status->asym_pause;
}
of_node_get(np);
phy->mdio.dev.of_node = np;
phy->is_pseudo_fixed_link = true;
switch (status->speed) {
case SPEED_1000:
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
phy->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
phy->supported);
/* fall through */
case SPEED_100:
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
phy->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
phy->supported);
/* fall through */
case SPEED_10:
default:
linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
phy->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
phy->supported);
}
ret = phy_device_register(phy);
if (ret) {
phy_device_free(phy);
of_node_put(np);
fixed_phy_del(phy_addr);
return ERR_PTR(ret);
}
return phy;
}
EXPORT_SYMBOL_GPL(fixed_phy_register);
void fixed_phy_unregister(struct phy_device *phy)
{
phy_device_remove(phy);
of_node_put(phy->mdio.dev.of_node);
fixed_phy_del(phy->mdio.addr);
}
EXPORT_SYMBOL_GPL(fixed_phy_unregister);
static int __init fixed_mdio_bus_init(void)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
int ret;
pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
fmb->mii_bus = mdiobus_alloc();
if (fmb->mii_bus == NULL) {
ret = -ENOMEM;
goto err_mdiobus_reg;
}
snprintf(fmb->mii_bus->id, MII_BUS_ID_SIZE, "fixed-0");
fmb->mii_bus->name = "Fixed MDIO Bus";
fmb->mii_bus->priv = fmb;
fmb->mii_bus->parent = &pdev->dev;
fmb->mii_bus->read = &fixed_mdio_read;
fmb->mii_bus->write = &fixed_mdio_write;
ret = mdiobus_register(fmb->mii_bus);
if (ret)
goto err_mdiobus_alloc;
return 0;
err_mdiobus_alloc:
mdiobus_free(fmb->mii_bus);
err_mdiobus_reg:
platform_device_unregister(pdev);
return ret;
}
module_init(fixed_mdio_bus_init);
static void __exit fixed_mdio_bus_exit(void)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct fixed_phy *fp, *tmp;
mdiobus_unregister(fmb->mii_bus);
mdiobus_free(fmb->mii_bus);
platform_device_unregister(pdev);
list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
list_del(&fp->node);
kfree(fp);
}
ida_destroy(&phy_fixed_ida);
}
module_exit(fixed_mdio_bus_exit);
MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)");
MODULE_AUTHOR("Vitaly Bordug");
MODULE_LICENSE("GPL");