OpenCloudOS-Kernel/net/bluetooth/hci_event.c

5240 lines
123 KiB
C
Raw Normal View History

/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
/* Bluetooth HCI event handling. */
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/mgmt.h>
#include "hci_request.h"
#include "hci_debugfs.h"
#include "a2mp.h"
#include "amp.h"
#include "smp.h"
#define ZERO_KEY "\x00\x00\x00\x00\x00\x00\x00\x00" \
"\x00\x00\x00\x00\x00\x00\x00\x00"
/* Handle HCI Event packets */
static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
clear_bit(HCI_INQUIRY, &hdev->flags);
smp_mb__after_atomic(); /* wake_up_bit advises about this barrier */
wake_up_bit(&hdev->flags, HCI_INQUIRY);
hci_dev_lock(hdev);
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
hci_dev_unlock(hdev);
hci_conn_check_pending(hdev);
}
static void hci_cc_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
hci_dev_set_flag(hdev, HCI_PERIODIC_INQ);
}
static void hci_cc_exit_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
hci_dev_clear_flag(hdev, HCI_PERIODIC_INQ);
hci_conn_check_pending(hdev);
}
static void hci_cc_remote_name_req_cancel(struct hci_dev *hdev,
struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
static void hci_cc_role_discovery(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_role_discovery *rp = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn)
conn->role = rp->role;
hci_dev_unlock(hdev);
}
static void hci_cc_read_link_policy(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_link_policy *rp = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn)
conn->link_policy = __le16_to_cpu(rp->policy);
hci_dev_unlock(hdev);
}
static void hci_cc_write_link_policy(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_write_link_policy *rp = (void *) skb->data;
struct hci_conn *conn;
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LINK_POLICY);
if (!sent)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn)
conn->link_policy = get_unaligned_le16(sent + 2);
hci_dev_unlock(hdev);
}
static void hci_cc_read_def_link_policy(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_def_link_policy *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->link_policy = __le16_to_cpu(rp->policy);
}
static void hci_cc_write_def_link_policy(struct hci_dev *hdev,
struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_DEF_LINK_POLICY);
if (!sent)
return;
hdev->link_policy = get_unaligned_le16(sent);
}
static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
clear_bit(HCI_RESET, &hdev->flags);
if (status)
return;
/* Reset all non-persistent flags */
hci_dev_clear_volatile_flags(hdev);
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
hdev->inq_tx_power = HCI_TX_POWER_INVALID;
hdev->adv_tx_power = HCI_TX_POWER_INVALID;
memset(hdev->adv_data, 0, sizeof(hdev->adv_data));
hdev->adv_data_len = 0;
memset(hdev->scan_rsp_data, 0, sizeof(hdev->scan_rsp_data));
hdev->scan_rsp_data_len = 0;
hdev->le_scan_type = LE_SCAN_PASSIVE;
hdev->ssp_debug_mode = 0;
hci_bdaddr_list_clear(&hdev->le_white_list);
}
static void hci_cc_read_stored_link_key(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_stored_link_key *rp = (void *)skb->data;
struct hci_cp_read_stored_link_key *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
sent = hci_sent_cmd_data(hdev, HCI_OP_READ_STORED_LINK_KEY);
if (!sent)
return;
if (!rp->status && sent->read_all == 0x01) {
hdev->stored_max_keys = rp->max_keys;
hdev->stored_num_keys = rp->num_keys;
}
}
static void hci_cc_delete_stored_link_key(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_delete_stored_link_key *rp = (void *)skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
if (rp->num_keys <= hdev->stored_num_keys)
hdev->stored_num_keys -= rp->num_keys;
else
hdev->stored_num_keys = 0;
}
static void hci_cc_write_local_name(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LOCAL_NAME);
if (!sent)
return;
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_set_local_name_complete(hdev, sent, status);
else if (!status)
memcpy(hdev->dev_name, sent, HCI_MAX_NAME_LENGTH);
hci_dev_unlock(hdev);
}
static void hci_cc_read_local_name(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_name *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
if (hci_dev_test_flag(hdev, HCI_SETUP) ||
hci_dev_test_flag(hdev, HCI_CONFIG))
memcpy(hdev->dev_name, rp->name, HCI_MAX_NAME_LENGTH);
}
static void hci_cc_write_auth_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_AUTH_ENABLE);
if (!sent)
return;
hci_dev_lock(hdev);
if (!status) {
__u8 param = *((__u8 *) sent);
if (param == AUTH_ENABLED)
set_bit(HCI_AUTH, &hdev->flags);
else
clear_bit(HCI_AUTH, &hdev->flags);
}
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_auth_enable_complete(hdev, status);
hci_dev_unlock(hdev);
}
static void hci_cc_write_encrypt_mode(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
__u8 param;
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_ENCRYPT_MODE);
if (!sent)
return;
param = *((__u8 *) sent);
if (param)
set_bit(HCI_ENCRYPT, &hdev->flags);
else
clear_bit(HCI_ENCRYPT, &hdev->flags);
}
static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
__u8 param;
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SCAN_ENABLE);
if (!sent)
return;
param = *((__u8 *) sent);
hci_dev_lock(hdev);
if (status) {
hdev->discov_timeout = 0;
goto done;
}
if (param & SCAN_INQUIRY)
set_bit(HCI_ISCAN, &hdev->flags);
else
clear_bit(HCI_ISCAN, &hdev->flags);
if (param & SCAN_PAGE)
set_bit(HCI_PSCAN, &hdev->flags);
else
clear_bit(HCI_PSCAN, &hdev->flags);
done:
hci_dev_unlock(hdev);
}
static void hci_cc_read_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_class_of_dev *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
memcpy(hdev->dev_class, rp->dev_class, 3);
BT_DBG("%s class 0x%.2x%.2x%.2x", hdev->name,
hdev->dev_class[2], hdev->dev_class[1], hdev->dev_class[0]);
}
static void hci_cc_write_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_CLASS_OF_DEV);
if (!sent)
return;
hci_dev_lock(hdev);
if (status == 0)
memcpy(hdev->dev_class, sent, 3);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_set_class_of_dev_complete(hdev, sent, status);
hci_dev_unlock(hdev);
}
static void hci_cc_read_voice_setting(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_voice_setting *rp = (void *) skb->data;
__u16 setting;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
setting = __le16_to_cpu(rp->voice_setting);
if (hdev->voice_setting == setting)
return;
hdev->voice_setting = setting;
BT_DBG("%s voice setting 0x%4.4x", hdev->name, setting);
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_VOICE_SETTING);
}
static void hci_cc_write_voice_setting(struct hci_dev *hdev,
struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
__u16 setting;
void *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_VOICE_SETTING);
if (!sent)
return;
setting = get_unaligned_le16(sent);
if (hdev->voice_setting == setting)
return;
hdev->voice_setting = setting;
BT_DBG("%s voice setting 0x%4.4x", hdev->name, setting);
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_VOICE_SETTING);
}
static void hci_cc_read_num_supported_iac(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_num_supported_iac *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->num_iac = rp->num_iac;
BT_DBG("%s num iac %d", hdev->name, hdev->num_iac);
}
static void hci_cc_write_ssp_mode(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
struct hci_cp_write_ssp_mode *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SSP_MODE);
if (!sent)
return;
hci_dev_lock(hdev);
if (!status) {
if (sent->mode)
hdev->features[1][0] |= LMP_HOST_SSP;
else
hdev->features[1][0] &= ~LMP_HOST_SSP;
}
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_ssp_enable_complete(hdev, sent->mode, status);
else if (!status) {
if (sent->mode)
hci_dev_set_flag(hdev, HCI_SSP_ENABLED);
else
hci_dev_clear_flag(hdev, HCI_SSP_ENABLED);
}
hci_dev_unlock(hdev);
}
static void hci_cc_write_sc_support(struct hci_dev *hdev, struct sk_buff *skb)
{
u8 status = *((u8 *) skb->data);
struct hci_cp_write_sc_support *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SC_SUPPORT);
if (!sent)
return;
hci_dev_lock(hdev);
if (!status) {
if (sent->support)
hdev->features[1][0] |= LMP_HOST_SC;
else
hdev->features[1][0] &= ~LMP_HOST_SC;
}
if (!hci_dev_test_flag(hdev, HCI_MGMT) && !status) {
if (sent->support)
hci_dev_set_flag(hdev, HCI_SC_ENABLED);
else
hci_dev_clear_flag(hdev, HCI_SC_ENABLED);
}
hci_dev_unlock(hdev);
}
static void hci_cc_read_local_version(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_version *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
if (hci_dev_test_flag(hdev, HCI_SETUP) ||
hci_dev_test_flag(hdev, HCI_CONFIG)) {
hdev->hci_ver = rp->hci_ver;
hdev->hci_rev = __le16_to_cpu(rp->hci_rev);
hdev->lmp_ver = rp->lmp_ver;
hdev->manufacturer = __le16_to_cpu(rp->manufacturer);
hdev->lmp_subver = __le16_to_cpu(rp->lmp_subver);
}
}
static void hci_cc_read_local_commands(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_local_commands *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
if (hci_dev_test_flag(hdev, HCI_SETUP) ||
hci_dev_test_flag(hdev, HCI_CONFIG))
memcpy(hdev->commands, rp->commands, sizeof(hdev->commands));
}
static void hci_cc_read_local_features(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_local_features *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
memcpy(hdev->features, rp->features, 8);
/* Adjust default settings according to features
* supported by device. */
if (hdev->features[0][0] & LMP_3SLOT)
hdev->pkt_type |= (HCI_DM3 | HCI_DH3);
if (hdev->features[0][0] & LMP_5SLOT)
hdev->pkt_type |= (HCI_DM5 | HCI_DH5);
if (hdev->features[0][1] & LMP_HV2) {
hdev->pkt_type |= (HCI_HV2);
hdev->esco_type |= (ESCO_HV2);
}
if (hdev->features[0][1] & LMP_HV3) {
hdev->pkt_type |= (HCI_HV3);
hdev->esco_type |= (ESCO_HV3);
}
if (lmp_esco_capable(hdev))
hdev->esco_type |= (ESCO_EV3);
if (hdev->features[0][4] & LMP_EV4)
hdev->esco_type |= (ESCO_EV4);
if (hdev->features[0][4] & LMP_EV5)
hdev->esco_type |= (ESCO_EV5);
if (hdev->features[0][5] & LMP_EDR_ESCO_2M)
hdev->esco_type |= (ESCO_2EV3);
if (hdev->features[0][5] & LMP_EDR_ESCO_3M)
hdev->esco_type |= (ESCO_3EV3);
if (hdev->features[0][5] & LMP_EDR_3S_ESCO)
hdev->esco_type |= (ESCO_2EV5 | ESCO_3EV5);
}
static void hci_cc_read_local_ext_features(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_local_ext_features *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
if (hdev->max_page < rp->max_page)
hdev->max_page = rp->max_page;
if (rp->page < HCI_MAX_PAGES)
memcpy(hdev->features[rp->page], rp->features, 8);
}
static void hci_cc_read_flow_control_mode(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_flow_control_mode *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->flow_ctl_mode = rp->mode;
}
static void hci_cc_read_buffer_size(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_buffer_size *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->acl_mtu = __le16_to_cpu(rp->acl_mtu);
hdev->sco_mtu = rp->sco_mtu;
hdev->acl_pkts = __le16_to_cpu(rp->acl_max_pkt);
hdev->sco_pkts = __le16_to_cpu(rp->sco_max_pkt);
if (test_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks)) {
hdev->sco_mtu = 64;
hdev->sco_pkts = 8;
}
hdev->acl_cnt = hdev->acl_pkts;
hdev->sco_cnt = hdev->sco_pkts;
BT_DBG("%s acl mtu %d:%d sco mtu %d:%d", hdev->name, hdev->acl_mtu,
hdev->acl_pkts, hdev->sco_mtu, hdev->sco_pkts);
}
static void hci_cc_read_bd_addr(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_bd_addr *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
if (test_bit(HCI_INIT, &hdev->flags))
bacpy(&hdev->bdaddr, &rp->bdaddr);
if (hci_dev_test_flag(hdev, HCI_SETUP))
bacpy(&hdev->setup_addr, &rp->bdaddr);
}
static void hci_cc_read_page_scan_activity(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_page_scan_activity *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
if (test_bit(HCI_INIT, &hdev->flags)) {
hdev->page_scan_interval = __le16_to_cpu(rp->interval);
hdev->page_scan_window = __le16_to_cpu(rp->window);
}
}
static void hci_cc_write_page_scan_activity(struct hci_dev *hdev,
struct sk_buff *skb)
{
u8 status = *((u8 *) skb->data);
struct hci_cp_write_page_scan_activity *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_PAGE_SCAN_ACTIVITY);
if (!sent)
return;
hdev->page_scan_interval = __le16_to_cpu(sent->interval);
hdev->page_scan_window = __le16_to_cpu(sent->window);
}
static void hci_cc_read_page_scan_type(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_page_scan_type *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
if (test_bit(HCI_INIT, &hdev->flags))
hdev->page_scan_type = rp->type;
}
static void hci_cc_write_page_scan_type(struct hci_dev *hdev,
struct sk_buff *skb)
{
u8 status = *((u8 *) skb->data);
u8 *type;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
type = hci_sent_cmd_data(hdev, HCI_OP_WRITE_PAGE_SCAN_TYPE);
if (type)
hdev->page_scan_type = *type;
}
static void hci_cc_read_data_block_size(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_data_block_size *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->block_mtu = __le16_to_cpu(rp->max_acl_len);
hdev->block_len = __le16_to_cpu(rp->block_len);
hdev->num_blocks = __le16_to_cpu(rp->num_blocks);
hdev->block_cnt = hdev->num_blocks;
BT_DBG("%s blk mtu %d cnt %d len %d", hdev->name, hdev->block_mtu,
hdev->block_cnt, hdev->block_len);
}
static void hci_cc_read_clock(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_clock *rp = (void *) skb->data;
struct hci_cp_read_clock *cp;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
if (skb->len < sizeof(*rp))
return;
if (rp->status)
return;
hci_dev_lock(hdev);
cp = hci_sent_cmd_data(hdev, HCI_OP_READ_CLOCK);
if (!cp)
goto unlock;
if (cp->which == 0x00) {
hdev->clock = le32_to_cpu(rp->clock);
goto unlock;
}
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn) {
conn->clock = le32_to_cpu(rp->clock);
conn->clock_accuracy = le16_to_cpu(rp->accuracy);
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_cc_read_local_amp_info(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_local_amp_info *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
goto a2mp_rsp;
hdev->amp_status = rp->amp_status;
hdev->amp_total_bw = __le32_to_cpu(rp->total_bw);
hdev->amp_max_bw = __le32_to_cpu(rp->max_bw);
hdev->amp_min_latency = __le32_to_cpu(rp->min_latency);
hdev->amp_max_pdu = __le32_to_cpu(rp->max_pdu);
hdev->amp_type = rp->amp_type;
hdev->amp_pal_cap = __le16_to_cpu(rp->pal_cap);
hdev->amp_assoc_size = __le16_to_cpu(rp->max_assoc_size);
hdev->amp_be_flush_to = __le32_to_cpu(rp->be_flush_to);
hdev->amp_max_flush_to = __le32_to_cpu(rp->max_flush_to);
a2mp_rsp:
a2mp_send_getinfo_rsp(hdev);
}
static void hci_cc_read_local_amp_assoc(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_local_amp_assoc *rp = (void *) skb->data;
struct amp_assoc *assoc = &hdev->loc_assoc;
size_t rem_len, frag_len;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
goto a2mp_rsp;
frag_len = skb->len - sizeof(*rp);
rem_len = __le16_to_cpu(rp->rem_len);
if (rem_len > frag_len) {
BT_DBG("frag_len %zu rem_len %zu", frag_len, rem_len);
memcpy(assoc->data + assoc->offset, rp->frag, frag_len);
assoc->offset += frag_len;
/* Read other fragments */
amp_read_loc_assoc_frag(hdev, rp->phy_handle);
return;
}
memcpy(assoc->data + assoc->offset, rp->frag, rem_len);
assoc->len = assoc->offset + rem_len;
assoc->offset = 0;
a2mp_rsp:
/* Send A2MP Rsp when all fragments are received */
a2mp_send_getampassoc_rsp(hdev, rp->status);
a2mp_send_create_phy_link_req(hdev, rp->status);
}
static void hci_cc_read_inq_rsp_tx_power(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_inq_rsp_tx_power *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->inq_tx_power = rp->tx_power;
}
static void hci_cc_pin_code_reply(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_pin_code_reply *rp = (void *) skb->data;
struct hci_cp_pin_code_reply *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_pin_code_reply_complete(hdev, &rp->bdaddr, rp->status);
if (rp->status)
goto unlock;
cp = hci_sent_cmd_data(hdev, HCI_OP_PIN_CODE_REPLY);
if (!cp)
goto unlock;
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
if (conn)
conn->pin_length = cp->pin_len;
unlock:
hci_dev_unlock(hdev);
}
static void hci_cc_pin_code_neg_reply(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_pin_code_neg_reply *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_pin_code_neg_reply_complete(hdev, &rp->bdaddr,
rp->status);
hci_dev_unlock(hdev);
}
static void hci_cc_le_read_buffer_size(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_le_read_buffer_size *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->le_mtu = __le16_to_cpu(rp->le_mtu);
hdev->le_pkts = rp->le_max_pkt;
hdev->le_cnt = hdev->le_pkts;
BT_DBG("%s le mtu %d:%d", hdev->name, hdev->le_mtu, hdev->le_pkts);
}
static void hci_cc_le_read_local_features(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_le_read_local_features *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
memcpy(hdev->le_features, rp->features, 8);
}
static void hci_cc_le_read_adv_tx_power(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_le_read_adv_tx_power *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->adv_tx_power = rp->tx_power;
}
static void hci_cc_user_confirm_reply(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_user_confirm_reply *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_user_confirm_reply_complete(hdev, &rp->bdaddr, ACL_LINK, 0,
rp->status);
hci_dev_unlock(hdev);
}
static void hci_cc_user_confirm_neg_reply(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_user_confirm_reply *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_user_confirm_neg_reply_complete(hdev, &rp->bdaddr,
ACL_LINK, 0, rp->status);
hci_dev_unlock(hdev);
}
static void hci_cc_user_passkey_reply(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_user_confirm_reply *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_user_passkey_reply_complete(hdev, &rp->bdaddr, ACL_LINK,
0, rp->status);
hci_dev_unlock(hdev);
}
static void hci_cc_user_passkey_neg_reply(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_user_confirm_reply *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_user_passkey_neg_reply_complete(hdev, &rp->bdaddr,
ACL_LINK, 0, rp->status);
hci_dev_unlock(hdev);
}
Bluetooth: Add support for local OOB data with Secure Connections For Secure Connections support and the usage of out-of-band pairing, it is needed to read the P-256 hash and randomizer or P-192 hash and randomizer. This change will read P-192 data when Secure Connections is disabled and P-192 and P-256 data when it is enabled. The difference is between using HCI Read Local OOB Data and using the new HCI Read Local OOB Extended Data command. The first one has been introduced with Bluetooth 2.1 and returns only the P-192 data. < HCI Command: Read Local OOB Data (0x03|0x0057) plen 0 > HCI Event: Command Complete (0x0e) plen 36 Read Local OOB Data (0x03|0x0057) ncmd 1 Status: Success (0x00) Hash C from P-192: 975a59baa1c4eee391477cb410b23e6d Randomizer R with P-192: 9ee63b7dec411d3b467c5ae446df7f7d The second command has been introduced with Bluetooth 4.1 and will return P-192 and P-256 data. < HCI Command: Read Local OOB Extended Data (0x03|0x007d) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local OOB Extended Data (0x03|0x007d) ncmd 1 Status: Success (0x00) Hash C from P-192: 6489731804b156fa6355efb8124a1389 Randomizer R with P-192: 4781d5352fb215b2958222b3937b6026 Hash C from P-256: 69ef8a928b9d07fc149e630e74ecb991 Randomizer R with P-256: 4781d5352fb215b2958222b3937b6026 The change for the management interface is transparent and no change is required for existing userspace. The Secure Connections feature needs to be manually enabled. When it is disabled, then userspace only gets the P-192 returned and with Secure Connections enabled, userspace gets P-192 and P-256 in an extended structure. It is also acceptable to just ignore the P-256 data since it is not required to support them. The pairing with out-of-band credentials will still succeed. However then of course no Secure Connection will b established. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-01-10 18:07:26 +08:00
static void hci_cc_read_local_oob_data(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_local_oob_data *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
hci_dev_lock(hdev);
mgmt_read_local_oob_data_complete(hdev, rp->hash, rp->rand, NULL, NULL,
rp->status);
Bluetooth: Add support for local OOB data with Secure Connections For Secure Connections support and the usage of out-of-band pairing, it is needed to read the P-256 hash and randomizer or P-192 hash and randomizer. This change will read P-192 data when Secure Connections is disabled and P-192 and P-256 data when it is enabled. The difference is between using HCI Read Local OOB Data and using the new HCI Read Local OOB Extended Data command. The first one has been introduced with Bluetooth 2.1 and returns only the P-192 data. < HCI Command: Read Local OOB Data (0x03|0x0057) plen 0 > HCI Event: Command Complete (0x0e) plen 36 Read Local OOB Data (0x03|0x0057) ncmd 1 Status: Success (0x00) Hash C from P-192: 975a59baa1c4eee391477cb410b23e6d Randomizer R with P-192: 9ee63b7dec411d3b467c5ae446df7f7d The second command has been introduced with Bluetooth 4.1 and will return P-192 and P-256 data. < HCI Command: Read Local OOB Extended Data (0x03|0x007d) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local OOB Extended Data (0x03|0x007d) ncmd 1 Status: Success (0x00) Hash C from P-192: 6489731804b156fa6355efb8124a1389 Randomizer R with P-192: 4781d5352fb215b2958222b3937b6026 Hash C from P-256: 69ef8a928b9d07fc149e630e74ecb991 Randomizer R with P-256: 4781d5352fb215b2958222b3937b6026 The change for the management interface is transparent and no change is required for existing userspace. The Secure Connections feature needs to be manually enabled. When it is disabled, then userspace only gets the P-192 returned and with Secure Connections enabled, userspace gets P-192 and P-256 in an extended structure. It is also acceptable to just ignore the P-256 data since it is not required to support them. The pairing with out-of-band credentials will still succeed. However then of course no Secure Connection will b established. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-01-10 18:07:26 +08:00
hci_dev_unlock(hdev);
}
static void hci_cc_read_local_oob_ext_data(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_read_local_oob_ext_data *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
hci_dev_lock(hdev);
mgmt_read_local_oob_data_complete(hdev, rp->hash192, rp->rand192,
rp->hash256, rp->rand256,
Bluetooth: Add support for local OOB data with Secure Connections For Secure Connections support and the usage of out-of-band pairing, it is needed to read the P-256 hash and randomizer or P-192 hash and randomizer. This change will read P-192 data when Secure Connections is disabled and P-192 and P-256 data when it is enabled. The difference is between using HCI Read Local OOB Data and using the new HCI Read Local OOB Extended Data command. The first one has been introduced with Bluetooth 2.1 and returns only the P-192 data. < HCI Command: Read Local OOB Data (0x03|0x0057) plen 0 > HCI Event: Command Complete (0x0e) plen 36 Read Local OOB Data (0x03|0x0057) ncmd 1 Status: Success (0x00) Hash C from P-192: 975a59baa1c4eee391477cb410b23e6d Randomizer R with P-192: 9ee63b7dec411d3b467c5ae446df7f7d The second command has been introduced with Bluetooth 4.1 and will return P-192 and P-256 data. < HCI Command: Read Local OOB Extended Data (0x03|0x007d) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local OOB Extended Data (0x03|0x007d) ncmd 1 Status: Success (0x00) Hash C from P-192: 6489731804b156fa6355efb8124a1389 Randomizer R with P-192: 4781d5352fb215b2958222b3937b6026 Hash C from P-256: 69ef8a928b9d07fc149e630e74ecb991 Randomizer R with P-256: 4781d5352fb215b2958222b3937b6026 The change for the management interface is transparent and no change is required for existing userspace. The Secure Connections feature needs to be manually enabled. When it is disabled, then userspace only gets the P-192 returned and with Secure Connections enabled, userspace gets P-192 and P-256 in an extended structure. It is also acceptable to just ignore the P-256 data since it is not required to support them. The pairing with out-of-band credentials will still succeed. However then of course no Secure Connection will b established. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-01-10 18:07:26 +08:00
rp->status);
hci_dev_unlock(hdev);
}
static void hci_cc_le_set_random_addr(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
bdaddr_t *sent;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_RANDOM_ADDR);
if (!sent)
return;
hci_dev_lock(hdev);
bacpy(&hdev->random_addr, sent);
hci_dev_unlock(hdev);
}
static void hci_cc_le_set_adv_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 *sent, status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_ADV_ENABLE);
if (!sent)
return;
hci_dev_lock(hdev);
/* If we're doing connection initiation as peripheral. Set a
* timeout in case something goes wrong.
*/
if (*sent) {
struct hci_conn *conn;
hci_dev_set_flag(hdev, HCI_LE_ADV);
conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
if (conn)
queue_delayed_work(hdev->workqueue,
&conn->le_conn_timeout,
conn->conn_timeout);
} else {
hci_dev_clear_flag(hdev, HCI_LE_ADV);
}
hci_dev_unlock(hdev);
}
static void hci_cc_le_set_scan_param(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_cp_le_set_scan_param *cp;
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_SCAN_PARAM);
if (!cp)
return;
hci_dev_lock(hdev);
hdev->le_scan_type = cp->type;
hci_dev_unlock(hdev);
}
static bool has_pending_adv_report(struct hci_dev *hdev)
{
struct discovery_state *d = &hdev->discovery;
return bacmp(&d->last_adv_addr, BDADDR_ANY);
}
static void clear_pending_adv_report(struct hci_dev *hdev)
{
struct discovery_state *d = &hdev->discovery;
bacpy(&d->last_adv_addr, BDADDR_ANY);
d->last_adv_data_len = 0;
}
static void store_pending_adv_report(struct hci_dev *hdev, bdaddr_t *bdaddr,
u8 bdaddr_type, s8 rssi, u32 flags,
u8 *data, u8 len)
{
struct discovery_state *d = &hdev->discovery;
bacpy(&d->last_adv_addr, bdaddr);
d->last_adv_addr_type = bdaddr_type;
d->last_adv_rssi = rssi;
d->last_adv_flags = flags;
memcpy(d->last_adv_data, data, len);
d->last_adv_data_len = len;
}
static void hci_cc_le_set_scan_enable(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_cp_le_set_scan_enable *cp;
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_SCAN_ENABLE);
if (!cp)
return;
hci_dev_lock(hdev);
switch (cp->enable) {
case LE_SCAN_ENABLE:
hci_dev_set_flag(hdev, HCI_LE_SCAN);
if (hdev->le_scan_type == LE_SCAN_ACTIVE)
clear_pending_adv_report(hdev);
break;
case LE_SCAN_DISABLE:
/* We do this here instead of when setting DISCOVERY_STOPPED
* since the latter would potentially require waiting for
* inquiry to stop too.
*/
if (has_pending_adv_report(hdev)) {
struct discovery_state *d = &hdev->discovery;
mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK,
d->last_adv_addr_type, NULL,
d->last_adv_rssi, d->last_adv_flags,
d->last_adv_data,
d->last_adv_data_len, NULL, 0);
}
/* Cancel this timer so that we don't try to disable scanning
* when it's already disabled.
*/
cancel_delayed_work(&hdev->le_scan_disable);
hci_dev_clear_flag(hdev, HCI_LE_SCAN);
/* The HCI_LE_SCAN_INTERRUPTED flag indicates that we
* interrupted scanning due to a connect request. Mark
* therefore discovery as stopped. If this was not
* because of a connect request advertising might have
* been disabled because of active scanning, so
* re-enable it again if necessary.
*/
if (hci_dev_test_and_clear_flag(hdev, HCI_LE_SCAN_INTERRUPTED))
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
else if (!hci_dev_test_flag(hdev, HCI_LE_ADV) &&
hdev->discovery.state == DISCOVERY_FINDING)
mgmt_reenable_advertising(hdev);
break;
default:
BT_ERR("Used reserved LE_Scan_Enable param %d", cp->enable);
break;
}
hci_dev_unlock(hdev);
}
static void hci_cc_le_read_white_list_size(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_le_read_white_list_size *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x size %u", hdev->name, rp->status, rp->size);
if (rp->status)
return;
hdev->le_white_list_size = rp->size;
}
static void hci_cc_le_clear_white_list(struct hci_dev *hdev,
struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
hci_bdaddr_list_clear(&hdev->le_white_list);
}
static void hci_cc_le_add_to_white_list(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_cp_le_add_to_white_list *sent;
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_LE_ADD_TO_WHITE_LIST);
if (!sent)
return;
hci_bdaddr_list_add(&hdev->le_white_list, &sent->bdaddr,
sent->bdaddr_type);
}
static void hci_cc_le_del_from_white_list(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_cp_le_del_from_white_list *sent;
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_LE_DEL_FROM_WHITE_LIST);
if (!sent)
return;
hci_bdaddr_list_del(&hdev->le_white_list, &sent->bdaddr,
sent->bdaddr_type);
}
static void hci_cc_le_read_supported_states(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_le_read_supported_states *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
memcpy(hdev->le_states, rp->le_states, 8);
}
static void hci_cc_le_read_def_data_len(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_le_read_def_data_len *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->le_def_tx_len = le16_to_cpu(rp->tx_len);
hdev->le_def_tx_time = le16_to_cpu(rp->tx_time);
}
static void hci_cc_le_write_def_data_len(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_cp_le_write_def_data_len *sent;
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_LE_WRITE_DEF_DATA_LEN);
if (!sent)
return;
hdev->le_def_tx_len = le16_to_cpu(sent->tx_len);
hdev->le_def_tx_time = le16_to_cpu(sent->tx_time);
}
static void hci_cc_le_read_max_data_len(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_le_read_max_data_len *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hdev->le_max_tx_len = le16_to_cpu(rp->tx_len);
hdev->le_max_tx_time = le16_to_cpu(rp->tx_time);
hdev->le_max_rx_len = le16_to_cpu(rp->rx_len);
hdev->le_max_rx_time = le16_to_cpu(rp->rx_time);
}
static void hci_cc_write_le_host_supported(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_cp_write_le_host_supported *sent;
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED);
if (!sent)
return;
hci_dev_lock(hdev);
if (sent->le) {
hdev->features[1][0] |= LMP_HOST_LE;
hci_dev_set_flag(hdev, HCI_LE_ENABLED);
} else {
hdev->features[1][0] &= ~LMP_HOST_LE;
hci_dev_clear_flag(hdev, HCI_LE_ENABLED);
hci_dev_clear_flag(hdev, HCI_ADVERTISING);
}
if (sent->simul)
hdev->features[1][0] |= LMP_HOST_LE_BREDR;
else
hdev->features[1][0] &= ~LMP_HOST_LE_BREDR;
hci_dev_unlock(hdev);
}
static void hci_cc_set_adv_param(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_cp_le_set_adv_param *cp;
u8 status = *((u8 *) skb->data);
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_ADV_PARAM);
if (!cp)
return;
hci_dev_lock(hdev);
hdev->adv_addr_type = cp->own_address_type;
hci_dev_unlock(hdev);
}
static void hci_cc_write_remote_amp_assoc(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_rp_write_remote_amp_assoc *rp = (void *) skb->data;
BT_DBG("%s status 0x%2.2x phy_handle 0x%2.2x",
hdev->name, rp->status, rp->phy_handle);
if (rp->status)
return;
amp_write_rem_assoc_continue(hdev, rp->phy_handle);
}
static void hci_cc_read_rssi(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_rssi *rp = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn)
conn->rssi = rp->rssi;
hci_dev_unlock(hdev);
}
static void hci_cc_read_tx_power(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_cp_read_tx_power *sent;
struct hci_rp_read_tx_power *rp = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, rp->status);
if (rp->status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_READ_TX_POWER);
if (!sent)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (!conn)
goto unlock;
switch (sent->type) {
case 0x00:
conn->tx_power = rp->tx_power;
break;
case 0x01:
conn->max_tx_power = rp->tx_power;
break;
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_cc_write_ssp_debug_mode(struct hci_dev *hdev, struct sk_buff *skb)
{
u8 status = *((u8 *) skb->data);
u8 *mode;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
mode = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SSP_DEBUG_MODE);
if (mode)
hdev->ssp_debug_mode = *mode;
}
static void hci_cs_inquiry(struct hci_dev *hdev, __u8 status)
{
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status) {
hci_conn_check_pending(hdev);
return;
}
set_bit(HCI_INQUIRY, &hdev->flags);
}
static void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_create_conn *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
cp = hci_sent_cmd_data(hdev, HCI_OP_CREATE_CONN);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
BT_DBG("%s bdaddr %pMR hcon %p", hdev->name, &cp->bdaddr, conn);
if (status) {
if (conn && conn->state == BT_CONNECT) {
if (status != 0x0c || conn->attempt > 2) {
conn->state = BT_CLOSED;
hci_connect_cfm(conn, status);
hci_conn_del(conn);
} else
conn->state = BT_CONNECT2;
}
} else {
if (!conn) {
conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr,
HCI_ROLE_MASTER);
if (!conn)
BT_ERR("No memory for new connection");
}
}
hci_dev_unlock(hdev);
}
static void hci_cs_add_sco(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_add_sco *cp;
struct hci_conn *acl, *sco;
__u16 handle;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_ADD_SCO);
if (!cp)
return;
handle = __le16_to_cpu(cp->handle);
BT_DBG("%s handle 0x%4.4x", hdev->name, handle);
hci_dev_lock(hdev);
acl = hci_conn_hash_lookup_handle(hdev, handle);
if (acl) {
sco = acl->link;
if (sco) {
sco->state = BT_CLOSED;
hci_connect_cfm(sco, status);
hci_conn_del(sco);
}
}
hci_dev_unlock(hdev);
}
static void hci_cs_auth_requested(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_auth_requested *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_AUTH_REQUESTED);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
if (conn->state == BT_CONFIG) {
hci_connect_cfm(conn, status);
hci_conn_drop(conn);
}
}
hci_dev_unlock(hdev);
}
static void hci_cs_set_conn_encrypt(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_set_conn_encrypt *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_SET_CONN_ENCRYPT);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
if (conn->state == BT_CONFIG) {
hci_connect_cfm(conn, status);
hci_conn_drop(conn);
}
}
hci_dev_unlock(hdev);
}
static int hci_outgoing_auth_needed(struct hci_dev *hdev,
struct hci_conn *conn)
{
if (conn->state != BT_CONFIG || !conn->out)
return 0;
if (conn->pending_sec_level == BT_SECURITY_SDP)
return 0;
/* Only request authentication for SSP connections or non-SSP
* devices with sec_level MEDIUM or HIGH or if MITM protection
* is requested.
*/
if (!hci_conn_ssp_enabled(conn) && !(conn->auth_type & 0x01) &&
conn->pending_sec_level != BT_SECURITY_FIPS &&
conn->pending_sec_level != BT_SECURITY_HIGH &&
conn->pending_sec_level != BT_SECURITY_MEDIUM)
return 0;
return 1;
}
static int hci_resolve_name(struct hci_dev *hdev,
struct inquiry_entry *e)
{
struct hci_cp_remote_name_req cp;
memset(&cp, 0, sizeof(cp));
bacpy(&cp.bdaddr, &e->data.bdaddr);
cp.pscan_rep_mode = e->data.pscan_rep_mode;
cp.pscan_mode = e->data.pscan_mode;
cp.clock_offset = e->data.clock_offset;
return hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp);
}
static bool hci_resolve_next_name(struct hci_dev *hdev)
{
struct discovery_state *discov = &hdev->discovery;
struct inquiry_entry *e;
if (list_empty(&discov->resolve))
return false;
e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED);
if (!e)
return false;
if (hci_resolve_name(hdev, e) == 0) {
e->name_state = NAME_PENDING;
return true;
}
return false;
}
static void hci_check_pending_name(struct hci_dev *hdev, struct hci_conn *conn,
bdaddr_t *bdaddr, u8 *name, u8 name_len)
{
struct discovery_state *discov = &hdev->discovery;
struct inquiry_entry *e;
/* Update the mgmt connected state if necessary. Be careful with
* conn objects that exist but are not (yet) connected however.
* Only those in BT_CONFIG or BT_CONNECTED states can be
* considered connected.
*/
if (conn &&
(conn->state == BT_CONFIG || conn->state == BT_CONNECTED) &&
Bluetooth: Send mgmt_connected only if state is BT_CONFIG If a remote name request is initiated while acl connection is going on, and if it fails then mgmt_connected will be sent. Evetually after acl connection, authentication will not be initiated and userspace will never get pairing reply. < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr AA:BB:CC:DD:EE:FF ptype 0xcc18 rswitch 0x01 clkoffset 0x2306 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Inquiry Complete (0x01) plen 1 status 0x00 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr AA:BB:CC:DD:EE:FF mode 1 clkoffset 0x2306 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x0c ncmd 1 Error: Command Disallowed > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 50 bdaddr 00:0D:FD:47:53:B2 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 50 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 50 slots 5 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 50 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 50 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 50 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 This patch sends mgmt_connected in remote name command status only if conn->state is BT_CONFIG Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-11-07 19:09:09 +08:00
!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
mgmt_device_connected(hdev, conn, 0, name, name_len);
if (discov->state == DISCOVERY_STOPPED)
return;
if (discov->state == DISCOVERY_STOPPING)
goto discov_complete;
if (discov->state != DISCOVERY_RESOLVING)
return;
e = hci_inquiry_cache_lookup_resolve(hdev, bdaddr, NAME_PENDING);
/* If the device was not found in a list of found devices names of which
* are pending. there is no need to continue resolving a next name as it
* will be done upon receiving another Remote Name Request Complete
* Event */
if (!e)
return;
list_del(&e->list);
if (name) {
e->name_state = NAME_KNOWN;
mgmt_remote_name(hdev, bdaddr, ACL_LINK, 0x00,
e->data.rssi, name, name_len);
} else {
e->name_state = NAME_NOT_KNOWN;
}
if (hci_resolve_next_name(hdev))
return;
discov_complete:
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
}
static void hci_cs_remote_name_req(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_remote_name_req *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
/* If successful wait for the name req complete event before
* checking for the need to do authentication */
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_REMOTE_NAME_REQ);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
if (hci_dev_test_flag(hdev, HCI_MGMT))
hci_check_pending_name(hdev, conn, &cp->bdaddr, NULL, 0);
if (!conn)
goto unlock;
if (!hci_outgoing_auth_needed(hdev, conn))
goto unlock;
if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
struct hci_cp_auth_requested auth_cp;
set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags);
auth_cp.handle = __cpu_to_le16(conn->handle);
hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
sizeof(auth_cp), &auth_cp);
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_cs_read_remote_features(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_read_remote_features *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_READ_REMOTE_FEATURES);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
if (conn->state == BT_CONFIG) {
hci_connect_cfm(conn, status);
hci_conn_drop(conn);
}
}
hci_dev_unlock(hdev);
}
static void hci_cs_read_remote_ext_features(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_read_remote_ext_features *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_READ_REMOTE_EXT_FEATURES);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
if (conn->state == BT_CONFIG) {
hci_connect_cfm(conn, status);
hci_conn_drop(conn);
}
}
hci_dev_unlock(hdev);
}
static void hci_cs_setup_sync_conn(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_setup_sync_conn *cp;
struct hci_conn *acl, *sco;
__u16 handle;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_SETUP_SYNC_CONN);
if (!cp)
return;
handle = __le16_to_cpu(cp->handle);
BT_DBG("%s handle 0x%4.4x", hdev->name, handle);
hci_dev_lock(hdev);
acl = hci_conn_hash_lookup_handle(hdev, handle);
if (acl) {
sco = acl->link;
if (sco) {
sco->state = BT_CLOSED;
hci_connect_cfm(sco, status);
hci_conn_del(sco);
}
}
hci_dev_unlock(hdev);
}
static void hci_cs_sniff_mode(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_sniff_mode *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_SNIFF_MODE);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags);
if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->flags))
hci_sco_setup(conn, status);
}
hci_dev_unlock(hdev);
}
static void hci_cs_exit_sniff_mode(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_exit_sniff_mode *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_EXIT_SNIFF_MODE);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags);
if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->flags))
hci_sco_setup(conn, status);
}
hci_dev_unlock(hdev);
}
static void hci_cs_disconnect(struct hci_dev *hdev, u8 status)
{
struct hci_cp_disconnect *cp;
struct hci_conn *conn;
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_DISCONNECT);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn)
mgmt_disconnect_failed(hdev, &conn->dst, conn->type,
conn->dst_type, status);
hci_dev_unlock(hdev);
}
static void hci_cs_create_phylink(struct hci_dev *hdev, u8 status)
{
struct hci_cp_create_phy_link *cp;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
cp = hci_sent_cmd_data(hdev, HCI_OP_CREATE_PHY_LINK);
if (!cp)
return;
hci_dev_lock(hdev);
if (status) {
struct hci_conn *hcon;
hcon = hci_conn_hash_lookup_handle(hdev, cp->phy_handle);
if (hcon)
hci_conn_del(hcon);
} else {
amp_write_remote_assoc(hdev, cp->phy_handle);
}
hci_dev_unlock(hdev);
}
static void hci_cs_accept_phylink(struct hci_dev *hdev, u8 status)
{
struct hci_cp_accept_phy_link *cp;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_ACCEPT_PHY_LINK);
if (!cp)
return;
amp_write_remote_assoc(hdev, cp->phy_handle);
}
static void hci_cs_le_create_conn(struct hci_dev *hdev, u8 status)
{
struct hci_cp_le_create_conn *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
/* All connection failure handling is taken care of by the
* hci_le_conn_failed function which is triggered by the HCI
* request completion callbacks used for connecting.
*/
if (status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_LE_CREATE_CONN);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->peer_addr);
if (!conn)
goto unlock;
/* Store the initiator and responder address information which
* is needed for SMP. These values will not change during the
* lifetime of the connection.
*/
conn->init_addr_type = cp->own_address_type;
if (cp->own_address_type == ADDR_LE_DEV_RANDOM)
bacpy(&conn->init_addr, &hdev->random_addr);
else
bacpy(&conn->init_addr, &hdev->bdaddr);
conn->resp_addr_type = cp->peer_addr_type;
bacpy(&conn->resp_addr, &cp->peer_addr);
/* We don't want the connection attempt to stick around
* indefinitely since LE doesn't have a page timeout concept
* like BR/EDR. Set a timer for any connection that doesn't use
* the white list for connecting.
*/
if (cp->filter_policy == HCI_LE_USE_PEER_ADDR)
queue_delayed_work(conn->hdev->workqueue,
&conn->le_conn_timeout,
conn->conn_timeout);
unlock:
hci_dev_unlock(hdev);
}
static void hci_cs_le_start_enc(struct hci_dev *hdev, u8 status)
{
struct hci_cp_le_start_enc *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
hci_dev_lock(hdev);
cp = hci_sent_cmd_data(hdev, HCI_OP_LE_START_ENC);
if (!cp)
goto unlock;
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (!conn)
goto unlock;
if (conn->state != BT_CONNECTED)
goto unlock;
hci_disconnect(conn, HCI_ERROR_AUTH_FAILURE);
hci_conn_drop(conn);
unlock:
hci_dev_unlock(hdev);
}
static void hci_cs_switch_role(struct hci_dev *hdev, u8 status)
{
struct hci_cp_switch_role *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_SWITCH_ROLE);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
if (conn)
clear_bit(HCI_CONN_RSWITCH_PEND, &conn->flags);
hci_dev_unlock(hdev);
}
static void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
struct discovery_state *discov = &hdev->discovery;
struct inquiry_entry *e;
BT_DBG("%s status 0x%2.2x", hdev->name, status);
hci_conn_check_pending(hdev);
if (!test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
return;
smp_mb__after_atomic(); /* wake_up_bit advises about this barrier */
wake_up_bit(&hdev->flags, HCI_INQUIRY);
if (!hci_dev_test_flag(hdev, HCI_MGMT))
return;
hci_dev_lock(hdev);
if (discov->state != DISCOVERY_FINDING)
goto unlock;
if (list_empty(&discov->resolve)) {
/* When BR/EDR inquiry is active and no LE scanning is in
* progress, then change discovery state to indicate completion.
*
* When running LE scanning and BR/EDR inquiry simultaneously
* and the LE scan already finished, then change the discovery
* state to indicate completion.
*/
if (!hci_dev_test_flag(hdev, HCI_LE_SCAN) ||
!test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks))
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
goto unlock;
}
e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, NAME_NEEDED);
if (e && hci_resolve_name(hdev, e) == 0) {
e->name_state = NAME_PENDING;
hci_discovery_set_state(hdev, DISCOVERY_RESOLVING);
} else {
/* When BR/EDR inquiry is active and no LE scanning is in
* progress, then change discovery state to indicate completion.
*
* When running LE scanning and BR/EDR inquiry simultaneously
* and the LE scan already finished, then change the discovery
* state to indicate completion.
*/
if (!hci_dev_test_flag(hdev, HCI_LE_SCAN) ||
!test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks))
hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_inquiry_result_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct inquiry_data data;
struct inquiry_info *info = (void *) (skb->data + 1);
int num_rsp = *((__u8 *) skb->data);
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
if (!num_rsp)
return;
if (hci_dev_test_flag(hdev, HCI_PERIODIC_INQ))
return;
hci_dev_lock(hdev);
for (; num_rsp; num_rsp--, info++) {
u32 flags;
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = info->pscan_mode;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = HCI_RSSI_INVALID;
data.ssp_mode = 0x00;
flags = hci_inquiry_cache_update(hdev, &data, false);
mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00,
info->dev_class, HCI_RSSI_INVALID,
flags, NULL, 0, NULL, 0);
}
hci_dev_unlock(hdev);
}
static void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_conn_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
if (!conn) {
if (ev->link_type != SCO_LINK)
goto unlock;
conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
conn->type = SCO_LINK;
}
if (!ev->status) {
conn->handle = __le16_to_cpu(ev->handle);
if (conn->type == ACL_LINK) {
conn->state = BT_CONFIG;
hci_conn_hold(conn);
Bluetooth: Fix legacy pairing with some devices Some devices e.g. some Android based phones don't do SDP search before pairing and cancel legacy pairing when ACL is disconnected. PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT is only received after remote user entered PIN. In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT (2 seconds) is being used to timeout ACL connection. This results in problems with legacy pairing as remote user has only few seconds to enter PIN before ACL is disconnected. Increase disconnect timeout for incomming connection to HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists. To avoid keeping ACL alive for too long after SDP search set ACL timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected. 2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01 Role: Slave 2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00 2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 42 2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:02:72:D6:6A:3F mode 0 2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3 handle 42 slots 5 2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 1 2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 42 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 42 page 1 2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 42 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000 2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0' 2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 42 2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3 status 0x13 handle 42 Error: Remote User Terminated Connection 2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x13 Reason: Remote User Terminated Connection Cc: stable@vger.kernel.org Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-19 20:46:08 +08:00
if (!conn->out && !hci_conn_ssp_enabled(conn) &&
!hci_find_link_key(hdev, &ev->bdaddr))
conn->disc_timeout = HCI_PAIRING_TIMEOUT;
else
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
} else
conn->state = BT_CONNECTED;
hci_debugfs_create_conn(conn);
hci_conn_add_sysfs(conn);
if (test_bit(HCI_AUTH, &hdev->flags))
set_bit(HCI_CONN_AUTH, &conn->flags);
if (test_bit(HCI_ENCRYPT, &hdev->flags))
set_bit(HCI_CONN_ENCRYPT, &conn->flags);
/* Get remote features */
if (conn->type == ACL_LINK) {
struct hci_cp_read_remote_features cp;
cp.handle = ev->handle;
hci_send_cmd(hdev, HCI_OP_READ_REMOTE_FEATURES,
sizeof(cp), &cp);
hci_update_page_scan(hdev);
}
/* Set packet type for incoming connection */
if (!conn->out && hdev->hci_ver < BLUETOOTH_VER_2_0) {
struct hci_cp_change_conn_ptype cp;
cp.handle = ev->handle;
cp.pkt_type = cpu_to_le16(conn->pkt_type);
hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE, sizeof(cp),
&cp);
}
} else {
conn->state = BT_CLOSED;
if (conn->type == ACL_LINK)
mgmt_connect_failed(hdev, &conn->dst, conn->type,
conn->dst_type, ev->status);
}
if (conn->type == ACL_LINK)
hci_sco_setup(conn, ev->status);
if (ev->status) {
hci_connect_cfm(conn, ev->status);
hci_conn_del(conn);
} else if (ev->link_type != ACL_LINK)
hci_connect_cfm(conn, ev->status);
unlock:
hci_dev_unlock(hdev);
hci_conn_check_pending(hdev);
}
static void hci_reject_conn(struct hci_dev *hdev, bdaddr_t *bdaddr)
{
struct hci_cp_reject_conn_req cp;
bacpy(&cp.bdaddr, bdaddr);
cp.reason = HCI_ERROR_REJ_BAD_ADDR;
hci_send_cmd(hdev, HCI_OP_REJECT_CONN_REQ, sizeof(cp), &cp);
}
static void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_conn_request *ev = (void *) skb->data;
int mask = hdev->link_mode;
struct inquiry_entry *ie;
struct hci_conn *conn;
__u8 flags = 0;
BT_DBG("%s bdaddr %pMR type 0x%x", hdev->name, &ev->bdaddr,
ev->link_type);
mask |= hci_proto_connect_ind(hdev, &ev->bdaddr, ev->link_type,
&flags);
if (!(mask & HCI_LM_ACCEPT)) {
hci_reject_conn(hdev, &ev->bdaddr);
return;
}
if (hci_bdaddr_list_lookup(&hdev->blacklist, &ev->bdaddr,
BDADDR_BREDR)) {
hci_reject_conn(hdev, &ev->bdaddr);
return;
}
/* Require HCI_CONNECTABLE or a whitelist entry to accept the
* connection. These features are only touched through mgmt so
* only do the checks if HCI_MGMT is set.
*/
if (hci_dev_test_flag(hdev, HCI_MGMT) &&
!hci_dev_test_flag(hdev, HCI_CONNECTABLE) &&
!hci_bdaddr_list_lookup(&hdev->whitelist, &ev->bdaddr,
BDADDR_BREDR)) {
hci_reject_conn(hdev, &ev->bdaddr);
return;
}
/* Connection accepted */
hci_dev_lock(hdev);
ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr);
if (ie)
memcpy(ie->data.dev_class, ev->dev_class, 3);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type,
&ev->bdaddr);
if (!conn) {
conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr,
HCI_ROLE_SLAVE);
if (!conn) {
BT_ERR("No memory for new connection");
hci_dev_unlock(hdev);
return;
}
}
memcpy(conn->dev_class, ev->dev_class, 3);
hci_dev_unlock(hdev);
if (ev->link_type == ACL_LINK ||
(!(flags & HCI_PROTO_DEFER) && !lmp_esco_capable(hdev))) {
struct hci_cp_accept_conn_req cp;
conn->state = BT_CONNECT;
bacpy(&cp.bdaddr, &ev->bdaddr);
if (lmp_rswitch_capable(hdev) && (mask & HCI_LM_MASTER))
cp.role = 0x00; /* Become master */
else
cp.role = 0x01; /* Remain slave */
hci_send_cmd(hdev, HCI_OP_ACCEPT_CONN_REQ, sizeof(cp), &cp);
} else if (!(flags & HCI_PROTO_DEFER)) {
struct hci_cp_accept_sync_conn_req cp;
conn->state = BT_CONNECT;
bacpy(&cp.bdaddr, &ev->bdaddr);
cp.pkt_type = cpu_to_le16(conn->pkt_type);
cp.tx_bandwidth = cpu_to_le32(0x00001f40);
cp.rx_bandwidth = cpu_to_le32(0x00001f40);
cp.max_latency = cpu_to_le16(0xffff);
cp.content_format = cpu_to_le16(hdev->voice_setting);
cp.retrans_effort = 0xff;
hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ, sizeof(cp),
&cp);
} else {
conn->state = BT_CONNECT2;
hci_connect_cfm(conn, 0);
}
}
static u8 hci_to_mgmt_reason(u8 err)
{
switch (err) {
case HCI_ERROR_CONNECTION_TIMEOUT:
return MGMT_DEV_DISCONN_TIMEOUT;
case HCI_ERROR_REMOTE_USER_TERM:
case HCI_ERROR_REMOTE_LOW_RESOURCES:
case HCI_ERROR_REMOTE_POWER_OFF:
return MGMT_DEV_DISCONN_REMOTE;
case HCI_ERROR_LOCAL_HOST_TERM:
return MGMT_DEV_DISCONN_LOCAL_HOST;
default:
return MGMT_DEV_DISCONN_UNKNOWN;
}
}
static void hci_disconn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_disconn_complete *ev = (void *) skb->data;
u8 reason = hci_to_mgmt_reason(ev->reason);
struct hci_conn_params *params;
struct hci_conn *conn;
bool mgmt_connected;
u8 type;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (!conn)
goto unlock;
if (ev->status) {
mgmt_disconnect_failed(hdev, &conn->dst, conn->type,
conn->dst_type, ev->status);
goto unlock;
}
conn->state = BT_CLOSED;
mgmt_connected = test_and_clear_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags);
mgmt_device_disconnected(hdev, &conn->dst, conn->type, conn->dst_type,
reason, mgmt_connected);
if (conn->type == ACL_LINK) {
if (test_bit(HCI_CONN_FLUSH_KEY, &conn->flags))
hci_remove_link_key(hdev, &conn->dst);
hci_update_page_scan(hdev);
}
params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
if (params) {
switch (params->auto_connect) {
case HCI_AUTO_CONN_LINK_LOSS:
if (ev->reason != HCI_ERROR_CONNECTION_TIMEOUT)
break;
/* Fall through */
case HCI_AUTO_CONN_DIRECT:
case HCI_AUTO_CONN_ALWAYS:
list_del_init(&params->action);
list_add(&params->action, &hdev->pend_le_conns);
hci_update_background_scan(hdev);
break;
default:
break;
}
}
type = conn->type;
hci_disconn_cfm(conn, ev->reason);
hci_conn_del(conn);
/* Re-enable advertising if necessary, since it might
* have been disabled by the connection. From the
* HCI_LE_Set_Advertise_Enable command description in
* the core specification (v4.0):
* "The Controller shall continue advertising until the Host
* issues an LE_Set_Advertise_Enable command with
* Advertising_Enable set to 0x00 (Advertising is disabled)
* or until a connection is created or until the Advertising
* is timed out due to Directed Advertising."
*/
if (type == LE_LINK)
mgmt_reenable_advertising(hdev);
unlock:
hci_dev_unlock(hdev);
}
static void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_auth_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (!conn)
goto unlock;
if (!ev->status) {
if (!hci_conn_ssp_enabled(conn) &&
test_bit(HCI_CONN_REAUTH_PEND, &conn->flags)) {
BT_INFO("re-auth of legacy device is not possible.");
} else {
set_bit(HCI_CONN_AUTH, &conn->flags);
conn->sec_level = conn->pending_sec_level;
}
} else {
mgmt_auth_failed(conn, ev->status);
}
clear_bit(HCI_CONN_AUTH_PEND, &conn->flags);
clear_bit(HCI_CONN_REAUTH_PEND, &conn->flags);
if (conn->state == BT_CONFIG) {
if (!ev->status && hci_conn_ssp_enabled(conn)) {
struct hci_cp_set_conn_encrypt cp;
cp.handle = ev->handle;
cp.encrypt = 0x01;
hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
&cp);
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
} else {
conn->state = BT_CONNECTED;
hci_connect_cfm(conn, ev->status);
hci_conn_drop(conn);
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
}
} else {
hci_auth_cfm(conn, ev->status);
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
hci_conn_hold(conn);
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
hci_conn_drop(conn);
}
if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags)) {
if (!ev->status) {
struct hci_cp_set_conn_encrypt cp;
cp.handle = ev->handle;
cp.encrypt = 0x01;
hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
&cp);
} else {
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
hci_encrypt_cfm(conn, ev->status, 0x00);
}
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_remote_name *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_conn_check_pending(hdev);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!hci_dev_test_flag(hdev, HCI_MGMT))
goto check_auth;
if (ev->status == 0)
hci_check_pending_name(hdev, conn, &ev->bdaddr, ev->name,
strnlen(ev->name, HCI_MAX_NAME_LENGTH));
else
hci_check_pending_name(hdev, conn, &ev->bdaddr, NULL, 0);
check_auth:
if (!conn)
goto unlock;
if (!hci_outgoing_auth_needed(hdev, conn))
goto unlock;
if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
struct hci_cp_auth_requested cp;
set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags);
cp.handle = __cpu_to_le16(conn->handle);
hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp);
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_encrypt_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_encrypt_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (!conn)
goto unlock;
if (!ev->status) {
if (ev->encrypt) {
/* Encryption implies authentication */
set_bit(HCI_CONN_AUTH, &conn->flags);
set_bit(HCI_CONN_ENCRYPT, &conn->flags);
conn->sec_level = conn->pending_sec_level;
/* P-256 authentication key implies FIPS */
if (conn->key_type == HCI_LK_AUTH_COMBINATION_P256)
set_bit(HCI_CONN_FIPS, &conn->flags);
if ((conn->type == ACL_LINK && ev->encrypt == 0x02) ||
conn->type == LE_LINK)
set_bit(HCI_CONN_AES_CCM, &conn->flags);
} else {
clear_bit(HCI_CONN_ENCRYPT, &conn->flags);
clear_bit(HCI_CONN_AES_CCM, &conn->flags);
}
}
/* We should disregard the current RPA and generate a new one
* whenever the encryption procedure fails.
*/
if (ev->status && conn->type == LE_LINK)
hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
if (ev->status && conn->state == BT_CONNECTED) {
hci_disconnect(conn, HCI_ERROR_AUTH_FAILURE);
hci_conn_drop(conn);
goto unlock;
}
if (conn->state == BT_CONFIG) {
if (!ev->status)
conn->state = BT_CONNECTED;
/* In Secure Connections Only mode, do not allow any
* connections that are not encrypted with AES-CCM
* using a P-256 authenticated combination key.
*/
if (hci_dev_test_flag(hdev, HCI_SC_ONLY) &&
(!test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
conn->key_type != HCI_LK_AUTH_COMBINATION_P256)) {
hci_connect_cfm(conn, HCI_ERROR_AUTH_FAILURE);
hci_conn_drop(conn);
goto unlock;
}
hci_connect_cfm(conn, ev->status);
hci_conn_drop(conn);
} else
hci_encrypt_cfm(conn, ev->status, ev->encrypt);
unlock:
hci_dev_unlock(hdev);
}
static void hci_change_link_key_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_change_link_key_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn) {
if (!ev->status)
set_bit(HCI_CONN_SECURE, &conn->flags);
clear_bit(HCI_CONN_AUTH_PEND, &conn->flags);
hci_key_change_cfm(conn, ev->status);
}
hci_dev_unlock(hdev);
}
static void hci_remote_features_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_remote_features *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (!conn)
goto unlock;
if (!ev->status)
memcpy(conn->features[0], ev->features, 8);
if (conn->state != BT_CONFIG)
goto unlock;
Bluetooth: Fix sending Read Remote Extended Features command This command should only be used if remote device reports that it supports extended features. Otherwise command will fail and connection will be dropped. Some devices support SSP but don't support extended features so current check for SSP support is not enought. Instead of checking for SSP support just check if both ends support Extended Feature. < HCI Command: Create Connection (0x01|0x0005) plen 13 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Packet type: 0xcc18 DM1 may be used DH1 may be used DM3 may be used DH3 may be used DM5 may be used DH5 may be used Page scan repetition mode: R1 (0x01) Page scan mode: Mandatory (0x00) Clock offset: 0x94c8 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 5 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 Handle: 5 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) ncmd 1 Status: Success (0x00) > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Page scan repetition mode: R1 (0x01) > HCI Event: Read Remote Supported Features (0x0b) plen 11 Status: Success (0x00) Handle: 5 Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x07 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Hold mode Sniff mode Park state Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode 3-slot Enhanced Data Rate eSCO packets Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 Handle: 5 Page: 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) ncmd 1 Status: Command Disallowed (0x0c) < HCI Command: Read Clock Offset (0x01|0x001f) plen 2 Handle: 5 > HCI Event: Command Status (0x0f) plen 4 Read Clock Offset (0x01|0x001f) ncmd 1 Status: Success (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 5 Reason: Remote User Terminated Connection (0x13) Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-29 23:36:59 +08:00
if (!ev->status && lmp_ext_feat_capable(hdev) &&
lmp_ext_feat_capable(conn)) {
struct hci_cp_read_remote_ext_features cp;
cp.handle = ev->handle;
cp.page = 0x01;
hci_send_cmd(hdev, HCI_OP_READ_REMOTE_EXT_FEATURES,
sizeof(cp), &cp);
goto unlock;
}
if (!ev->status && !test_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) {
struct hci_cp_remote_name_req cp;
memset(&cp, 0, sizeof(cp));
bacpy(&cp.bdaddr, &conn->dst);
cp.pscan_rep_mode = 0x02;
hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp);
} else if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
mgmt_device_connected(hdev, conn, 0, NULL, 0);
if (!hci_outgoing_auth_needed(hdev, conn)) {
conn->state = BT_CONNECTED;
hci_connect_cfm(conn, ev->status);
hci_conn_drop(conn);
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_cmd_complete *ev = (void *) skb->data;
u8 status = skb->data[sizeof(*ev)];
__u16 opcode;
skb_pull(skb, sizeof(*ev));
opcode = __le16_to_cpu(ev->opcode);
switch (opcode) {
case HCI_OP_INQUIRY_CANCEL:
hci_cc_inquiry_cancel(hdev, skb);
break;
case HCI_OP_PERIODIC_INQ:
hci_cc_periodic_inq(hdev, skb);
break;
case HCI_OP_EXIT_PERIODIC_INQ:
hci_cc_exit_periodic_inq(hdev, skb);
break;
case HCI_OP_REMOTE_NAME_REQ_CANCEL:
hci_cc_remote_name_req_cancel(hdev, skb);
break;
case HCI_OP_ROLE_DISCOVERY:
hci_cc_role_discovery(hdev, skb);
break;
case HCI_OP_READ_LINK_POLICY:
hci_cc_read_link_policy(hdev, skb);
break;
case HCI_OP_WRITE_LINK_POLICY:
hci_cc_write_link_policy(hdev, skb);
break;
case HCI_OP_READ_DEF_LINK_POLICY:
hci_cc_read_def_link_policy(hdev, skb);
break;
case HCI_OP_WRITE_DEF_LINK_POLICY:
hci_cc_write_def_link_policy(hdev, skb);
break;
case HCI_OP_RESET:
hci_cc_reset(hdev, skb);
break;
case HCI_OP_READ_STORED_LINK_KEY:
hci_cc_read_stored_link_key(hdev, skb);
break;
case HCI_OP_DELETE_STORED_LINK_KEY:
hci_cc_delete_stored_link_key(hdev, skb);
break;
case HCI_OP_WRITE_LOCAL_NAME:
hci_cc_write_local_name(hdev, skb);
break;
case HCI_OP_READ_LOCAL_NAME:
hci_cc_read_local_name(hdev, skb);
break;
case HCI_OP_WRITE_AUTH_ENABLE:
hci_cc_write_auth_enable(hdev, skb);
break;
case HCI_OP_WRITE_ENCRYPT_MODE:
hci_cc_write_encrypt_mode(hdev, skb);
break;
case HCI_OP_WRITE_SCAN_ENABLE:
hci_cc_write_scan_enable(hdev, skb);
break;
case HCI_OP_READ_CLASS_OF_DEV:
hci_cc_read_class_of_dev(hdev, skb);
break;
case HCI_OP_WRITE_CLASS_OF_DEV:
hci_cc_write_class_of_dev(hdev, skb);
break;
case HCI_OP_READ_VOICE_SETTING:
hci_cc_read_voice_setting(hdev, skb);
break;
case HCI_OP_WRITE_VOICE_SETTING:
hci_cc_write_voice_setting(hdev, skb);
break;
case HCI_OP_READ_NUM_SUPPORTED_IAC:
hci_cc_read_num_supported_iac(hdev, skb);
break;
case HCI_OP_WRITE_SSP_MODE:
hci_cc_write_ssp_mode(hdev, skb);
break;
case HCI_OP_WRITE_SC_SUPPORT:
hci_cc_write_sc_support(hdev, skb);
break;
case HCI_OP_READ_LOCAL_VERSION:
hci_cc_read_local_version(hdev, skb);
break;
case HCI_OP_READ_LOCAL_COMMANDS:
hci_cc_read_local_commands(hdev, skb);
break;
case HCI_OP_READ_LOCAL_FEATURES:
hci_cc_read_local_features(hdev, skb);
break;
case HCI_OP_READ_LOCAL_EXT_FEATURES:
hci_cc_read_local_ext_features(hdev, skb);
break;
case HCI_OP_READ_BUFFER_SIZE:
hci_cc_read_buffer_size(hdev, skb);
break;
case HCI_OP_READ_BD_ADDR:
hci_cc_read_bd_addr(hdev, skb);
break;
case HCI_OP_READ_PAGE_SCAN_ACTIVITY:
hci_cc_read_page_scan_activity(hdev, skb);
break;
case HCI_OP_WRITE_PAGE_SCAN_ACTIVITY:
hci_cc_write_page_scan_activity(hdev, skb);
break;
case HCI_OP_READ_PAGE_SCAN_TYPE:
hci_cc_read_page_scan_type(hdev, skb);
break;
case HCI_OP_WRITE_PAGE_SCAN_TYPE:
hci_cc_write_page_scan_type(hdev, skb);
break;
case HCI_OP_READ_DATA_BLOCK_SIZE:
hci_cc_read_data_block_size(hdev, skb);
break;
case HCI_OP_READ_FLOW_CONTROL_MODE:
hci_cc_read_flow_control_mode(hdev, skb);
break;
case HCI_OP_READ_LOCAL_AMP_INFO:
hci_cc_read_local_amp_info(hdev, skb);
break;
case HCI_OP_READ_CLOCK:
hci_cc_read_clock(hdev, skb);
break;
case HCI_OP_READ_LOCAL_AMP_ASSOC:
hci_cc_read_local_amp_assoc(hdev, skb);
break;
case HCI_OP_READ_INQ_RSP_TX_POWER:
hci_cc_read_inq_rsp_tx_power(hdev, skb);
break;
case HCI_OP_PIN_CODE_REPLY:
hci_cc_pin_code_reply(hdev, skb);
break;
case HCI_OP_PIN_CODE_NEG_REPLY:
hci_cc_pin_code_neg_reply(hdev, skb);
break;
case HCI_OP_READ_LOCAL_OOB_DATA:
Bluetooth: Add support for local OOB data with Secure Connections For Secure Connections support and the usage of out-of-band pairing, it is needed to read the P-256 hash and randomizer or P-192 hash and randomizer. This change will read P-192 data when Secure Connections is disabled and P-192 and P-256 data when it is enabled. The difference is between using HCI Read Local OOB Data and using the new HCI Read Local OOB Extended Data command. The first one has been introduced with Bluetooth 2.1 and returns only the P-192 data. < HCI Command: Read Local OOB Data (0x03|0x0057) plen 0 > HCI Event: Command Complete (0x0e) plen 36 Read Local OOB Data (0x03|0x0057) ncmd 1 Status: Success (0x00) Hash C from P-192: 975a59baa1c4eee391477cb410b23e6d Randomizer R with P-192: 9ee63b7dec411d3b467c5ae446df7f7d The second command has been introduced with Bluetooth 4.1 and will return P-192 and P-256 data. < HCI Command: Read Local OOB Extended Data (0x03|0x007d) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local OOB Extended Data (0x03|0x007d) ncmd 1 Status: Success (0x00) Hash C from P-192: 6489731804b156fa6355efb8124a1389 Randomizer R with P-192: 4781d5352fb215b2958222b3937b6026 Hash C from P-256: 69ef8a928b9d07fc149e630e74ecb991 Randomizer R with P-256: 4781d5352fb215b2958222b3937b6026 The change for the management interface is transparent and no change is required for existing userspace. The Secure Connections feature needs to be manually enabled. When it is disabled, then userspace only gets the P-192 returned and with Secure Connections enabled, userspace gets P-192 and P-256 in an extended structure. It is also acceptable to just ignore the P-256 data since it is not required to support them. The pairing with out-of-band credentials will still succeed. However then of course no Secure Connection will b established. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-01-10 18:07:26 +08:00
hci_cc_read_local_oob_data(hdev, skb);
break;
case HCI_OP_READ_LOCAL_OOB_EXT_DATA:
hci_cc_read_local_oob_ext_data(hdev, skb);
break;
case HCI_OP_LE_READ_BUFFER_SIZE:
hci_cc_le_read_buffer_size(hdev, skb);
break;
case HCI_OP_LE_READ_LOCAL_FEATURES:
hci_cc_le_read_local_features(hdev, skb);
break;
case HCI_OP_LE_READ_ADV_TX_POWER:
hci_cc_le_read_adv_tx_power(hdev, skb);
break;
case HCI_OP_USER_CONFIRM_REPLY:
hci_cc_user_confirm_reply(hdev, skb);
break;
case HCI_OP_USER_CONFIRM_NEG_REPLY:
hci_cc_user_confirm_neg_reply(hdev, skb);
break;
case HCI_OP_USER_PASSKEY_REPLY:
hci_cc_user_passkey_reply(hdev, skb);
break;
case HCI_OP_USER_PASSKEY_NEG_REPLY:
hci_cc_user_passkey_neg_reply(hdev, skb);
break;
case HCI_OP_LE_SET_RANDOM_ADDR:
hci_cc_le_set_random_addr(hdev, skb);
break;
case HCI_OP_LE_SET_ADV_ENABLE:
hci_cc_le_set_adv_enable(hdev, skb);
break;
case HCI_OP_LE_SET_SCAN_PARAM:
hci_cc_le_set_scan_param(hdev, skb);
break;
case HCI_OP_LE_SET_SCAN_ENABLE:
hci_cc_le_set_scan_enable(hdev, skb);
break;
case HCI_OP_LE_READ_WHITE_LIST_SIZE:
hci_cc_le_read_white_list_size(hdev, skb);
break;
case HCI_OP_LE_CLEAR_WHITE_LIST:
hci_cc_le_clear_white_list(hdev, skb);
break;
case HCI_OP_LE_ADD_TO_WHITE_LIST:
hci_cc_le_add_to_white_list(hdev, skb);
break;
case HCI_OP_LE_DEL_FROM_WHITE_LIST:
hci_cc_le_del_from_white_list(hdev, skb);
break;
case HCI_OP_LE_READ_SUPPORTED_STATES:
hci_cc_le_read_supported_states(hdev, skb);
break;
case HCI_OP_LE_READ_DEF_DATA_LEN:
hci_cc_le_read_def_data_len(hdev, skb);
break;
case HCI_OP_LE_WRITE_DEF_DATA_LEN:
hci_cc_le_write_def_data_len(hdev, skb);
break;
case HCI_OP_LE_READ_MAX_DATA_LEN:
hci_cc_le_read_max_data_len(hdev, skb);
break;
case HCI_OP_WRITE_LE_HOST_SUPPORTED:
hci_cc_write_le_host_supported(hdev, skb);
break;
case HCI_OP_LE_SET_ADV_PARAM:
hci_cc_set_adv_param(hdev, skb);
break;
case HCI_OP_WRITE_REMOTE_AMP_ASSOC:
hci_cc_write_remote_amp_assoc(hdev, skb);
break;
case HCI_OP_READ_RSSI:
hci_cc_read_rssi(hdev, skb);
break;
case HCI_OP_READ_TX_POWER:
hci_cc_read_tx_power(hdev, skb);
break;
case HCI_OP_WRITE_SSP_DEBUG_MODE:
hci_cc_write_ssp_debug_mode(hdev, skb);
break;
default:
BT_DBG("%s opcode 0x%4.4x", hdev->name, opcode);
break;
}
if (opcode != HCI_OP_NOP)
cancel_delayed_work(&hdev->cmd_timer);
if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags))
atomic_set(&hdev->cmd_cnt, 1);
hci_req_cmd_complete(hdev, opcode, status);
if (atomic_read(&hdev->cmd_cnt) && !skb_queue_empty(&hdev->cmd_q))
queue_work(hdev->workqueue, &hdev->cmd_work);
}
static void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_cmd_status *ev = (void *) skb->data;
__u16 opcode;
skb_pull(skb, sizeof(*ev));
opcode = __le16_to_cpu(ev->opcode);
switch (opcode) {
case HCI_OP_INQUIRY:
hci_cs_inquiry(hdev, ev->status);
break;
case HCI_OP_CREATE_CONN:
hci_cs_create_conn(hdev, ev->status);
break;
case HCI_OP_DISCONNECT:
hci_cs_disconnect(hdev, ev->status);
break;
case HCI_OP_ADD_SCO:
hci_cs_add_sco(hdev, ev->status);
break;
case HCI_OP_AUTH_REQUESTED:
hci_cs_auth_requested(hdev, ev->status);
break;
case HCI_OP_SET_CONN_ENCRYPT:
hci_cs_set_conn_encrypt(hdev, ev->status);
break;
case HCI_OP_REMOTE_NAME_REQ:
hci_cs_remote_name_req(hdev, ev->status);
break;
case HCI_OP_READ_REMOTE_FEATURES:
hci_cs_read_remote_features(hdev, ev->status);
break;
case HCI_OP_READ_REMOTE_EXT_FEATURES:
hci_cs_read_remote_ext_features(hdev, ev->status);
break;
case HCI_OP_SETUP_SYNC_CONN:
hci_cs_setup_sync_conn(hdev, ev->status);
break;
case HCI_OP_CREATE_PHY_LINK:
hci_cs_create_phylink(hdev, ev->status);
break;
case HCI_OP_ACCEPT_PHY_LINK:
hci_cs_accept_phylink(hdev, ev->status);
break;
case HCI_OP_SNIFF_MODE:
hci_cs_sniff_mode(hdev, ev->status);
break;
case HCI_OP_EXIT_SNIFF_MODE:
hci_cs_exit_sniff_mode(hdev, ev->status);
break;
case HCI_OP_SWITCH_ROLE:
hci_cs_switch_role(hdev, ev->status);
break;
case HCI_OP_LE_CREATE_CONN:
hci_cs_le_create_conn(hdev, ev->status);
break;
case HCI_OP_LE_START_ENC:
hci_cs_le_start_enc(hdev, ev->status);
break;
default:
BT_DBG("%s opcode 0x%4.4x", hdev->name, opcode);
break;
}
if (opcode != HCI_OP_NOP)
cancel_delayed_work(&hdev->cmd_timer);
if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags))
atomic_set(&hdev->cmd_cnt, 1);
if (ev->status ||
(hdev->sent_cmd && !bt_cb(hdev->sent_cmd)->req_event))
hci_req_cmd_complete(hdev, opcode, ev->status);
if (atomic_read(&hdev->cmd_cnt) && !skb_queue_empty(&hdev->cmd_q))
queue_work(hdev->workqueue, &hdev->cmd_work);
}
static void hci_hardware_error_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_hardware_error *ev = (void *) skb->data;
hdev->hw_error_code = ev->code;
queue_work(hdev->req_workqueue, &hdev->error_reset);
}
static void hci_role_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_role_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (conn) {
if (!ev->status)
conn->role = ev->role;
clear_bit(HCI_CONN_RSWITCH_PEND, &conn->flags);
hci_role_switch_cfm(conn, ev->status, ev->role);
}
hci_dev_unlock(hdev);
}
static void hci_num_comp_pkts_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_num_comp_pkts *ev = (void *) skb->data;
int i;
if (hdev->flow_ctl_mode != HCI_FLOW_CTL_MODE_PACKET_BASED) {
BT_ERR("Wrong event for mode %d", hdev->flow_ctl_mode);
return;
}
if (skb->len < sizeof(*ev) || skb->len < sizeof(*ev) +
ev->num_hndl * sizeof(struct hci_comp_pkts_info)) {
BT_DBG("%s bad parameters", hdev->name);
return;
}
BT_DBG("%s num_hndl %d", hdev->name, ev->num_hndl);
for (i = 0; i < ev->num_hndl; i++) {
struct hci_comp_pkts_info *info = &ev->handles[i];
struct hci_conn *conn;
__u16 handle, count;
handle = __le16_to_cpu(info->handle);
count = __le16_to_cpu(info->count);
conn = hci_conn_hash_lookup_handle(hdev, handle);
if (!conn)
continue;
conn->sent -= count;
switch (conn->type) {
case ACL_LINK:
hdev->acl_cnt += count;
if (hdev->acl_cnt > hdev->acl_pkts)
hdev->acl_cnt = hdev->acl_pkts;
break;
case LE_LINK:
if (hdev->le_pkts) {
hdev->le_cnt += count;
if (hdev->le_cnt > hdev->le_pkts)
hdev->le_cnt = hdev->le_pkts;
} else {
hdev->acl_cnt += count;
if (hdev->acl_cnt > hdev->acl_pkts)
hdev->acl_cnt = hdev->acl_pkts;
}
break;
case SCO_LINK:
hdev->sco_cnt += count;
if (hdev->sco_cnt > hdev->sco_pkts)
hdev->sco_cnt = hdev->sco_pkts;
break;
default:
BT_ERR("Unknown type %d conn %p", conn->type, conn);
break;
}
}
queue_work(hdev->workqueue, &hdev->tx_work);
}
static struct hci_conn *__hci_conn_lookup_handle(struct hci_dev *hdev,
__u16 handle)
{
struct hci_chan *chan;
switch (hdev->dev_type) {
case HCI_BREDR:
return hci_conn_hash_lookup_handle(hdev, handle);
case HCI_AMP:
chan = hci_chan_lookup_handle(hdev, handle);
if (chan)
return chan->conn;
break;
default:
BT_ERR("%s unknown dev_type %d", hdev->name, hdev->dev_type);
break;
}
return NULL;
}
static void hci_num_comp_blocks_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_num_comp_blocks *ev = (void *) skb->data;
int i;
if (hdev->flow_ctl_mode != HCI_FLOW_CTL_MODE_BLOCK_BASED) {
BT_ERR("Wrong event for mode %d", hdev->flow_ctl_mode);
return;
}
if (skb->len < sizeof(*ev) || skb->len < sizeof(*ev) +
ev->num_hndl * sizeof(struct hci_comp_blocks_info)) {
BT_DBG("%s bad parameters", hdev->name);
return;
}
BT_DBG("%s num_blocks %d num_hndl %d", hdev->name, ev->num_blocks,
ev->num_hndl);
for (i = 0; i < ev->num_hndl; i++) {
struct hci_comp_blocks_info *info = &ev->handles[i];
struct hci_conn *conn = NULL;
__u16 handle, block_count;
handle = __le16_to_cpu(info->handle);
block_count = __le16_to_cpu(info->blocks);
conn = __hci_conn_lookup_handle(hdev, handle);
if (!conn)
continue;
conn->sent -= block_count;
switch (conn->type) {
case ACL_LINK:
case AMP_LINK:
hdev->block_cnt += block_count;
if (hdev->block_cnt > hdev->num_blocks)
hdev->block_cnt = hdev->num_blocks;
break;
default:
BT_ERR("Unknown type %d conn %p", conn->type, conn);
break;
}
}
queue_work(hdev->workqueue, &hdev->tx_work);
}
static void hci_mode_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_mode_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn) {
conn->mode = ev->mode;
if (!test_and_clear_bit(HCI_CONN_MODE_CHANGE_PEND,
&conn->flags)) {
if (conn->mode == HCI_CM_ACTIVE)
set_bit(HCI_CONN_POWER_SAVE, &conn->flags);
else
clear_bit(HCI_CONN_POWER_SAVE, &conn->flags);
}
if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->flags))
hci_sco_setup(conn, ev->status);
}
hci_dev_unlock(hdev);
}
static void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
struct hci_ev_pin_code_req *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
if (conn->state == BT_CONNECTED) {
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
hci_conn_hold(conn);
conn->disc_timeout = HCI_PAIRING_TIMEOUT;
hci_conn_drop(conn);
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
}
if (!hci_dev_test_flag(hdev, HCI_BONDABLE) &&
!test_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags)) {
hci_send_cmd(hdev, HCI_OP_PIN_CODE_NEG_REPLY,
sizeof(ev->bdaddr), &ev->bdaddr);
} else if (hci_dev_test_flag(hdev, HCI_MGMT)) {
u8 secure;
if (conn->pending_sec_level == BT_SECURITY_HIGH)
secure = 1;
else
secure = 0;
mgmt_pin_code_request(hdev, &ev->bdaddr, secure);
}
unlock:
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
hci_dev_unlock(hdev);
}
static void conn_set_key(struct hci_conn *conn, u8 key_type, u8 pin_len)
{
if (key_type == HCI_LK_CHANGED_COMBINATION)
return;
conn->pin_length = pin_len;
conn->key_type = key_type;
switch (key_type) {
case HCI_LK_LOCAL_UNIT:
case HCI_LK_REMOTE_UNIT:
case HCI_LK_DEBUG_COMBINATION:
return;
case HCI_LK_COMBINATION:
if (pin_len == 16)
conn->pending_sec_level = BT_SECURITY_HIGH;
else
conn->pending_sec_level = BT_SECURITY_MEDIUM;
break;
case HCI_LK_UNAUTH_COMBINATION_P192:
case HCI_LK_UNAUTH_COMBINATION_P256:
conn->pending_sec_level = BT_SECURITY_MEDIUM;
break;
case HCI_LK_AUTH_COMBINATION_P192:
conn->pending_sec_level = BT_SECURITY_HIGH;
break;
case HCI_LK_AUTH_COMBINATION_P256:
conn->pending_sec_level = BT_SECURITY_FIPS;
break;
}
}
static void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_link_key_req *ev = (void *) skb->data;
struct hci_cp_link_key_reply cp;
struct hci_conn *conn;
struct link_key *key;
BT_DBG("%s", hdev->name);
if (!hci_dev_test_flag(hdev, HCI_MGMT))
return;
hci_dev_lock(hdev);
key = hci_find_link_key(hdev, &ev->bdaddr);
if (!key) {
BT_DBG("%s link key not found for %pMR", hdev->name,
&ev->bdaddr);
goto not_found;
}
BT_DBG("%s found key type %u for %pMR", hdev->name, key->type,
&ev->bdaddr);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (conn) {
clear_bit(HCI_CONN_NEW_LINK_KEY, &conn->flags);
if ((key->type == HCI_LK_UNAUTH_COMBINATION_P192 ||
key->type == HCI_LK_UNAUTH_COMBINATION_P256) &&
conn->auth_type != 0xff && (conn->auth_type & 0x01)) {
BT_DBG("%s ignoring unauthenticated key", hdev->name);
goto not_found;
}
if (key->type == HCI_LK_COMBINATION && key->pin_len < 16 &&
(conn->pending_sec_level == BT_SECURITY_HIGH ||
conn->pending_sec_level == BT_SECURITY_FIPS)) {
BT_DBG("%s ignoring key unauthenticated for high security",
hdev->name);
goto not_found;
}
conn_set_key(conn, key->type, key->pin_len);
}
bacpy(&cp.bdaddr, &ev->bdaddr);
memcpy(cp.link_key, key->val, HCI_LINK_KEY_SIZE);
hci_send_cmd(hdev, HCI_OP_LINK_KEY_REPLY, sizeof(cp), &cp);
hci_dev_unlock(hdev);
return;
not_found:
hci_send_cmd(hdev, HCI_OP_LINK_KEY_NEG_REPLY, 6, &ev->bdaddr);
hci_dev_unlock(hdev);
}
static void hci_link_key_notify_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
struct hci_ev_link_key_notify *ev = (void *) skb->data;
struct hci_conn *conn;
struct link_key *key;
bool persistent;
u8 pin_len = 0;
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
BT_DBG("%s", hdev->name);
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
hci_conn_hold(conn);
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
hci_conn_drop(conn);
set_bit(HCI_CONN_NEW_LINK_KEY, &conn->flags);
conn_set_key(conn, ev->key_type, conn->pin_length);
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
if (!hci_dev_test_flag(hdev, HCI_MGMT))
goto unlock;
key = hci_add_link_key(hdev, conn, &ev->bdaddr, ev->link_key,
ev->key_type, pin_len, &persistent);
if (!key)
goto unlock;
/* Update connection information since adding the key will have
* fixed up the type in the case of changed combination keys.
*/
if (ev->key_type == HCI_LK_CHANGED_COMBINATION)
conn_set_key(conn, key->type, key->pin_len);
mgmt_new_link_key(hdev, key, persistent);
/* Keep debug keys around only if the HCI_KEEP_DEBUG_KEYS flag
* is set. If it's not set simply remove the key from the kernel
* list (we've still notified user space about it but with
* store_hint being 0).
*/
if (key->type == HCI_LK_DEBUG_COMBINATION &&
!hci_dev_test_flag(hdev, HCI_KEEP_DEBUG_KEYS)) {
list_del_rcu(&key->list);
kfree_rcu(key, rcu);
goto unlock;
}
if (persistent)
clear_bit(HCI_CONN_FLUSH_KEY, &conn->flags);
else
set_bit(HCI_CONN_FLUSH_KEY, &conn->flags);
unlock:
Bluetooth: Add different pairing timeout for Legacy Pairing The Bluetooth stack uses a reference counting for all established ACL links and if no user (L2CAP connection) is present, the link will be terminated to save power. The problem part is the dedicated pairing when using Legacy Pairing (Bluetooth 2.0 and before). At that point no user is present and pairing attempts will be disconnected within 10 seconds or less. In previous kernel version this was not a problem since the disconnect timeout wasn't triggered on incoming connections for the first time. However this caused issues with broken host stacks that kept the connections around after dedicated pairing. When the support for Simple Pairing got added, the link establishment procedure needed to be changed and now causes issues when using Legacy Pairing When using Simple Pairing it is possible to do a proper reference counting of ACL link users. With Legacy Pairing this is not possible since the specification is unclear in some areas and too many broken Bluetooth devices have already been deployed. So instead of trying to deal with all the broken devices, a special pairing timeout will be introduced that increases the timeout to 60 seconds when pairing is triggered. If a broken devices now puts the stack into an unforeseen state, the worst that happens is the disconnect timeout triggers after 120 seconds instead of 4 seconds. This allows successful pairings with legacy and broken devices now. Based on a report by Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-04-27 02:01:22 +08:00
hci_dev_unlock(hdev);
}
static void hci_clock_offset_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_clock_offset *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn && !ev->status) {
struct inquiry_entry *ie;
ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
if (ie) {
ie->data.clock_offset = ev->clock_offset;
ie->timestamp = jiffies;
}
}
hci_dev_unlock(hdev);
}
static void hci_pkt_type_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_pkt_type_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn && !ev->status)
conn->pkt_type = __le16_to_cpu(ev->pkt_type);
hci_dev_unlock(hdev);
}
static void hci_pscan_rep_mode_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_pscan_rep_mode *ev = (void *) skb->data;
struct inquiry_entry *ie;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr);
if (ie) {
ie->data.pscan_rep_mode = ev->pscan_rep_mode;
ie->timestamp = jiffies;
}
hci_dev_unlock(hdev);
}
static void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct inquiry_data data;
int num_rsp = *((__u8 *) skb->data);
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
if (!num_rsp)
return;
if (hci_dev_test_flag(hdev, HCI_PERIODIC_INQ))
return;
hci_dev_lock(hdev);
if ((skb->len - 1) / num_rsp != sizeof(struct inquiry_info_with_rssi)) {
struct inquiry_info_with_rssi_and_pscan_mode *info;
info = (void *) (skb->data + 1);
for (; num_rsp; num_rsp--, info++) {
u32 flags;
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = info->pscan_mode;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
data.ssp_mode = 0x00;
flags = hci_inquiry_cache_update(hdev, &data, false);
mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00,
info->dev_class, info->rssi,
flags, NULL, 0, NULL, 0);
}
} else {
struct inquiry_info_with_rssi *info = (void *) (skb->data + 1);
for (; num_rsp; num_rsp--, info++) {
u32 flags;
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = 0x00;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
data.ssp_mode = 0x00;
flags = hci_inquiry_cache_update(hdev, &data, false);
mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00,
info->dev_class, info->rssi,
flags, NULL, 0, NULL, 0);
}
}
hci_dev_unlock(hdev);
}
static void hci_remote_ext_features_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_remote_ext_features *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (!conn)
goto unlock;
if (ev->page < HCI_MAX_PAGES)
memcpy(conn->features[ev->page], ev->features, 8);
if (!ev->status && ev->page == 0x01) {
struct inquiry_entry *ie;
ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
if (ie)
ie->data.ssp_mode = (ev->features[0] & LMP_HOST_SSP);
Bluetooth: Fix incorrect SSP mode bit for non SSP devices Some faulty non SSP devices send extended inquiry response during device discovery which is a violation of 2.1 specification. So for these devices we set SSP bit during acl connection initiation thinking that it is an SSP device. But for these devices, in remote host features event SSP supported bit will be off. But we are not clearing the SSP bit in that case and eventually SSP bit in conn flag will be incorrectly set for these devices. The software which has caused this issue is MecApp http://www.mecel.se/products/bluetooth/downloads/MecApp_download This patch does a workaround by clearing the SSP bit if it is not supported in remote host features event hcidump log ---------- < HCI Command: Inquiry (0x01|0x0001) plen 5 lap 0x9e8b33 len 4 num 0 > HCI Event: Command Status (0x0f) plen 4 Inquiry (0x01|0x0001) status 0x00 ncmd 1 > HCI Event: Extended Inquiry Result (0x2f) plen 255 bdaddr 00:1B:DC:05:B5:25 mode 1 clkoffset 0x3263 class 0x3c0000 rssi -77 Unknown type 0x42 with 8 bytes data Unknown type 0x1e with 2 bytes data > HCI Event: Inquiry Complete (0x01) plen 1 status 0x00 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:1B:DC:05:B5:25 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr 00:1B:DC:05:B5:25 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:1B:DC:05:B5:25 mode 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 0 Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:1B:DC:05:B5:25 mode 2 clkoffset 0x0000 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:1B:DC:05:B5:25 name 'Bluetooth PTS Radio v4' < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:1B:DC:05:B5:25 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:1B:DC:05:B5:25 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:1B:DC:05:B5:25 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:1B:DC:05:B5:25 Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-16 22:46:30 +08:00
if (ev->features[0] & LMP_HOST_SSP) {
set_bit(HCI_CONN_SSP_ENABLED, &conn->flags);
Bluetooth: Fix incorrect SSP mode bit for non SSP devices Some faulty non SSP devices send extended inquiry response during device discovery which is a violation of 2.1 specification. So for these devices we set SSP bit during acl connection initiation thinking that it is an SSP device. But for these devices, in remote host features event SSP supported bit will be off. But we are not clearing the SSP bit in that case and eventually SSP bit in conn flag will be incorrectly set for these devices. The software which has caused this issue is MecApp http://www.mecel.se/products/bluetooth/downloads/MecApp_download This patch does a workaround by clearing the SSP bit if it is not supported in remote host features event hcidump log ---------- < HCI Command: Inquiry (0x01|0x0001) plen 5 lap 0x9e8b33 len 4 num 0 > HCI Event: Command Status (0x0f) plen 4 Inquiry (0x01|0x0001) status 0x00 ncmd 1 > HCI Event: Extended Inquiry Result (0x2f) plen 255 bdaddr 00:1B:DC:05:B5:25 mode 1 clkoffset 0x3263 class 0x3c0000 rssi -77 Unknown type 0x42 with 8 bytes data Unknown type 0x1e with 2 bytes data > HCI Event: Inquiry Complete (0x01) plen 1 status 0x00 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:1B:DC:05:B5:25 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr 00:1B:DC:05:B5:25 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:1B:DC:05:B5:25 mode 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 0 Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:1B:DC:05:B5:25 mode 2 clkoffset 0x0000 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:1B:DC:05:B5:25 name 'Bluetooth PTS Radio v4' < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:1B:DC:05:B5:25 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:1B:DC:05:B5:25 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:1B:DC:05:B5:25 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:1B:DC:05:B5:25 Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-16 22:46:30 +08:00
} else {
/* It is mandatory by the Bluetooth specification that
* Extended Inquiry Results are only used when Secure
* Simple Pairing is enabled, but some devices violate
* this.
*
* To make these devices work, the internal SSP
* enabled flag needs to be cleared if the remote host
* features do not indicate SSP support */
clear_bit(HCI_CONN_SSP_ENABLED, &conn->flags);
}
if (ev->features[0] & LMP_HOST_SC)
set_bit(HCI_CONN_SC_ENABLED, &conn->flags);
}
if (conn->state != BT_CONFIG)
goto unlock;
if (!ev->status && !test_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) {
struct hci_cp_remote_name_req cp;
memset(&cp, 0, sizeof(cp));
bacpy(&cp.bdaddr, &conn->dst);
cp.pscan_rep_mode = 0x02;
hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp);
} else if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
mgmt_device_connected(hdev, conn, 0, NULL, 0);
if (!hci_outgoing_auth_needed(hdev, conn)) {
conn->state = BT_CONNECTED;
hci_connect_cfm(conn, ev->status);
hci_conn_drop(conn);
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_sync_conn_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
if (!conn) {
if (ev->link_type == ESCO_LINK)
goto unlock;
conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
conn->type = SCO_LINK;
}
switch (ev->status) {
case 0x00:
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
hci_debugfs_create_conn(conn);
hci_conn_add_sysfs(conn);
break;
case 0x10: /* Connection Accept Timeout */
Bluetooth: Handle specific error for SCO connection fallback Synchronous Connection Complete event can return error "Connection Rejected due to Limited resources (0x10)". Handling this error is required for SCO connection fallback. This error happens when the server tried to accept the connection but failed to negotiate settings. This error code has been verified experimentally by sending a T2 request to a T1 only SCO listener. Client dump follows : < HCI Command (0x01|0x0028) plen 17 [hci0] 3.696064 Handle: 12 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Retransmission effort: Optimize for link quality (0x02) Packet type: 0x0380 > HCI Event (0x0f) plen 4 [hci0] 3.697034 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event (0x2c) plen 17 [hci0] 3.736059 Status: Connection Rejected due to Limited Resources (0x0d) Handle: 0 Address: xx:xx:xx:xx:xx:AB (OUI 70-F3-95) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Server dump follows : > HCI Event (0x04) plen 10 [hci0] 4.741513 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Class: 0x620100 Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Uncategorized, code for device not assigned Networking (LAN, Ad hoc) Audio (Speaker, Microphone, Headset) Telephony (Cordless telephony, Modem, Headset) Link type: eSCO (0x02) < HCI Command (0x01|0x0029) plen 21 [hci0] 4.743269 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Retransmission effort: Optimize for link quality (0x02) Packet type: 0x03c1 > HCI Event (0x0f) plen 4 [hci0] 4.745517 Accept Synchronous Connection (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event (0x2c) plen 17 [hci0] 4.749508 Status: Connection Rejected due to Limited Resources (0x0d) Handle: 0 Address: xx:xx:xx:xx:xx:D9 (OUI 20-68-9D) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-19 20:24:02 +08:00
case 0x0d: /* Connection Rejected due to Limited Resources */
case 0x11: /* Unsupported Feature or Parameter Value */
case 0x1c: /* SCO interval rejected */
case 0x1a: /* Unsupported Remote Feature */
case 0x1f: /* Unspecified error */
Bluetooth: Fix aborting eSCO connection in case of error 0x20 Add additional error case to attempt alternative configuration for SCO. Error occurs with Intel BT controller where fallback is not attempted as the error 0x20 Unsupported LMP Parameter value is not included in the list of errors where a retry should be attempted. The problem also affects PTS test case TC_HF_ACS_BV_05_I. See the HCI log below for details: < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x20 handle 0 bdaddr 00:80:98:09:0B:19 type eSCO Error: Unsupported LMP Parameter Value < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 5 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x20 handle 0 bdaddr 00:80:98:09:0B:19 type eSCO Error: Unsupported LMP Parameter Value < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x03c8 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 257 bdaddr 00:80:98:09:0B:19 type eSCO Air mode: CVSD See btmon log for further details: > HCI Event (0x0f) plen 4 [hci0] 44.888063 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event (0x1b) plen 3 [hci0] 44.893064 Handle: 256 Max slots: 1 > HCI Event (0x2c) plen 17 [hci0] 44.942080 Status: Unsupported LMP Parameter Value (0x20) Handle: 0 Address: 00:1B:DC:06:04:B0 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x00 Retransmission window: 0x01 RX packet length: 0 TX packet length: 0 Air mode: CVSD (0x02) > HCI Event (0x1b) plen 3 [hci0] 44.948054 Handle: 256 Max slots: 5 Signed-off-by: Andrew Earl <andrewx.earl@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-10 18:31:04 +08:00
case 0x20: /* Unsupported LMP Parameter value */
if (conn->out) {
conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
(hdev->esco_type & EDR_ESCO_MASK);
if (hci_setup_sync(conn, conn->link->handle))
goto unlock;
}
/* fall through */
default:
conn->state = BT_CLOSED;
break;
}
hci_connect_cfm(conn, ev->status);
if (ev->status)
hci_conn_del(conn);
unlock:
hci_dev_unlock(hdev);
}
static inline size_t eir_get_length(u8 *eir, size_t eir_len)
{
size_t parsed = 0;
while (parsed < eir_len) {
u8 field_len = eir[0];
if (field_len == 0)
return parsed;
parsed += field_len + 1;
eir += field_len + 1;
}
return eir_len;
}
static void hci_extended_inquiry_result_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct inquiry_data data;
struct extended_inquiry_info *info = (void *) (skb->data + 1);
int num_rsp = *((__u8 *) skb->data);
size_t eir_len;
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
if (!num_rsp)
return;
if (hci_dev_test_flag(hdev, HCI_PERIODIC_INQ))
return;
hci_dev_lock(hdev);
for (; num_rsp; num_rsp--, info++) {
u32 flags;
bool name_known;
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = 0x00;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
data.ssp_mode = 0x01;
if (hci_dev_test_flag(hdev, HCI_MGMT))
name_known = eir_has_data_type(info->data,
sizeof(info->data),
EIR_NAME_COMPLETE);
else
name_known = true;
flags = hci_inquiry_cache_update(hdev, &data, name_known);
eir_len = eir_get_length(info->data, sizeof(info->data));
mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00,
info->dev_class, info->rssi,
flags, info->data, eir_len, NULL, 0);
}
hci_dev_unlock(hdev);
}
static void hci_key_refresh_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_key_refresh_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x handle 0x%4.4x", hdev->name, ev->status,
__le16_to_cpu(ev->handle));
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (!conn)
goto unlock;
/* For BR/EDR the necessary steps are taken through the
* auth_complete event.
*/
if (conn->type != LE_LINK)
goto unlock;
if (!ev->status)
conn->sec_level = conn->pending_sec_level;
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
if (ev->status && conn->state == BT_CONNECTED) {
hci_disconnect(conn, HCI_ERROR_AUTH_FAILURE);
hci_conn_drop(conn);
goto unlock;
}
if (conn->state == BT_CONFIG) {
if (!ev->status)
conn->state = BT_CONNECTED;
hci_connect_cfm(conn, ev->status);
hci_conn_drop(conn);
} else {
hci_auth_cfm(conn, ev->status);
hci_conn_hold(conn);
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
hci_conn_drop(conn);
}
unlock:
hci_dev_unlock(hdev);
}
static u8 hci_get_auth_req(struct hci_conn *conn)
{
/* If remote requests no-bonding follow that lead */
if (conn->remote_auth == HCI_AT_NO_BONDING ||
conn->remote_auth == HCI_AT_NO_BONDING_MITM)
return conn->remote_auth | (conn->auth_type & 0x01);
/* If both remote and local have enough IO capabilities, require
* MITM protection
*/
if (conn->remote_cap != HCI_IO_NO_INPUT_OUTPUT &&
conn->io_capability != HCI_IO_NO_INPUT_OUTPUT)
return conn->remote_auth | 0x01;
/* No MITM protection possible so ignore remote requirement */
return (conn->remote_auth & ~0x01) | (conn->auth_type & 0x01);
}
static u8 bredr_oob_data_present(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
struct oob_data *data;
data = hci_find_remote_oob_data(hdev, &conn->dst, BDADDR_BREDR);
if (!data)
return 0x00;
if (bredr_sc_enabled(hdev)) {
/* When Secure Connections is enabled, then just
* return the present value stored with the OOB
* data. The stored value contains the right present
* information. However it can only be trusted when
* not in Secure Connection Only mode.
*/
if (!hci_dev_test_flag(hdev, HCI_SC_ONLY))
return data->present;
/* When Secure Connections Only mode is enabled, then
* the P-256 values are required. If they are not
* available, then do not declare that OOB data is
* present.
*/
if (!memcmp(data->rand256, ZERO_KEY, 16) ||
!memcmp(data->hash256, ZERO_KEY, 16))
return 0x00;
return 0x02;
}
/* When Secure Connections is not enabled or actually
* not supported by the hardware, then check that if
* P-192 data values are present.
*/
if (!memcmp(data->rand192, ZERO_KEY, 16) ||
!memcmp(data->hash192, ZERO_KEY, 16))
return 0x00;
return 0x01;
}
static void hci_io_capa_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_io_capa_request *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
hci_conn_hold(conn);
if (!hci_dev_test_flag(hdev, HCI_MGMT))
goto unlock;
/* Allow pairing if we're pairable, the initiators of the
* pairing or if the remote is not requesting bonding.
*/
if (hci_dev_test_flag(hdev, HCI_BONDABLE) ||
test_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags) ||
(conn->remote_auth & ~0x01) == HCI_AT_NO_BONDING) {
struct hci_cp_io_capability_reply cp;
bacpy(&cp.bdaddr, &ev->bdaddr);
/* Change the IO capability from KeyboardDisplay
* to DisplayYesNo as it is not supported by BT spec. */
cp.capability = (conn->io_capability == 0x04) ?
HCI_IO_DISPLAY_YESNO : conn->io_capability;
/* If we are initiators, there is no remote information yet */
if (conn->remote_auth == 0xff) {
/* Request MITM protection if our IO caps allow it
* except for the no-bonding case.
*/
if (conn->io_capability != HCI_IO_NO_INPUT_OUTPUT &&
conn->auth_type != HCI_AT_NO_BONDING)
conn->auth_type |= 0x01;
} else {
conn->auth_type = hci_get_auth_req(conn);
}
/* If we're not bondable, force one of the non-bondable
* authentication requirement values.
*/
if (!hci_dev_test_flag(hdev, HCI_BONDABLE))
conn->auth_type &= HCI_AT_NO_BONDING_MITM;
cp.authentication = conn->auth_type;
cp.oob_data = bredr_oob_data_present(conn);
hci_send_cmd(hdev, HCI_OP_IO_CAPABILITY_REPLY,
sizeof(cp), &cp);
} else {
struct hci_cp_io_capability_neg_reply cp;
bacpy(&cp.bdaddr, &ev->bdaddr);
cp.reason = HCI_ERROR_PAIRING_NOT_ALLOWED;
hci_send_cmd(hdev, HCI_OP_IO_CAPABILITY_NEG_REPLY,
sizeof(cp), &cp);
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_io_capa_reply_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_io_capa_reply *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
conn->remote_cap = ev->capability;
conn->remote_auth = ev->authentication;
unlock:
hci_dev_unlock(hdev);
}
static void hci_user_confirm_request_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_user_confirm_req *ev = (void *) skb->data;
int loc_mitm, rem_mitm, confirm_hint = 0;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
if (!hci_dev_test_flag(hdev, HCI_MGMT))
goto unlock;
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
loc_mitm = (conn->auth_type & 0x01);
rem_mitm = (conn->remote_auth & 0x01);
/* If we require MITM but the remote device can't provide that
* (it has NoInputNoOutput) then reject the confirmation
* request. We check the security level here since it doesn't
* necessarily match conn->auth_type.
*/
if (conn->pending_sec_level > BT_SECURITY_MEDIUM &&
conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) {
BT_DBG("Rejecting request: remote device can't provide MITM");
hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_NEG_REPLY,
sizeof(ev->bdaddr), &ev->bdaddr);
goto unlock;
}
/* If no side requires MITM protection; auto-accept */
if ((!loc_mitm || conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) &&
(!rem_mitm || conn->io_capability == HCI_IO_NO_INPUT_OUTPUT)) {
/* If we're not the initiators request authorization to
* proceed from user space (mgmt_user_confirm with
* confirm_hint set to 1). The exception is if neither
* side had MITM or if the local IO capability is
* NoInputNoOutput, in which case we do auto-accept
*/
if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags) &&
conn->io_capability != HCI_IO_NO_INPUT_OUTPUT &&
(loc_mitm || rem_mitm)) {
BT_DBG("Confirming auto-accept as acceptor");
confirm_hint = 1;
goto confirm;
}
BT_DBG("Auto-accept of user confirmation with %ums delay",
hdev->auto_accept_delay);
if (hdev->auto_accept_delay > 0) {
int delay = msecs_to_jiffies(hdev->auto_accept_delay);
queue_delayed_work(conn->hdev->workqueue,
&conn->auto_accept_work, delay);
goto unlock;
}
hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_REPLY,
sizeof(ev->bdaddr), &ev->bdaddr);
goto unlock;
}
confirm:
mgmt_user_confirm_request(hdev, &ev->bdaddr, ACL_LINK, 0,
le32_to_cpu(ev->passkey), confirm_hint);
unlock:
hci_dev_unlock(hdev);
}
static void hci_user_passkey_request_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_user_passkey_req *ev = (void *) skb->data;
BT_DBG("%s", hdev->name);
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_user_passkey_request(hdev, &ev->bdaddr, ACL_LINK, 0);
}
static void hci_user_passkey_notify_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_user_passkey_notify *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!conn)
return;
conn->passkey_notify = __le32_to_cpu(ev->passkey);
conn->passkey_entered = 0;
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_user_passkey_notify(hdev, &conn->dst, conn->type,
conn->dst_type, conn->passkey_notify,
conn->passkey_entered);
}
static void hci_keypress_notify_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_keypress_notify *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!conn)
return;
switch (ev->type) {
case HCI_KEYPRESS_STARTED:
conn->passkey_entered = 0;
return;
case HCI_KEYPRESS_ENTERED:
conn->passkey_entered++;
break;
case HCI_KEYPRESS_ERASED:
conn->passkey_entered--;
break;
case HCI_KEYPRESS_CLEARED:
conn->passkey_entered = 0;
break;
case HCI_KEYPRESS_COMPLETED:
return;
}
if (hci_dev_test_flag(hdev, HCI_MGMT))
mgmt_user_passkey_notify(hdev, &conn->dst, conn->type,
conn->dst_type, conn->passkey_notify,
conn->passkey_entered);
}
static void hci_simple_pair_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_simple_pair_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
/* Reset the authentication requirement to unknown */
conn->remote_auth = 0xff;
/* To avoid duplicate auth_failed events to user space we check
* the HCI_CONN_AUTH_PEND flag which will be set if we
* initiated the authentication. A traditional auth_complete
* event gets always produced as initiator and is also mapped to
* the mgmt_auth_failed event */
if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags) && ev->status)
mgmt_auth_failed(conn, ev->status);
hci_conn_drop(conn);
unlock:
hci_dev_unlock(hdev);
}
static void hci_remote_host_features_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_remote_host_features *ev = (void *) skb->data;
struct inquiry_entry *ie;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (conn)
memcpy(conn->features[1], ev->features, 8);
ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr);
if (ie)
ie->data.ssp_mode = (ev->features[0] & LMP_HOST_SSP);
hci_dev_unlock(hdev);
}
static void hci_remote_oob_data_request_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_remote_oob_data_request *ev = (void *) skb->data;
struct oob_data *data;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
if (!hci_dev_test_flag(hdev, HCI_MGMT))
goto unlock;
data = hci_find_remote_oob_data(hdev, &ev->bdaddr, BDADDR_BREDR);
if (!data) {
struct hci_cp_remote_oob_data_neg_reply cp;
bacpy(&cp.bdaddr, &ev->bdaddr);
hci_send_cmd(hdev, HCI_OP_REMOTE_OOB_DATA_NEG_REPLY,
sizeof(cp), &cp);
goto unlock;
}
if (bredr_sc_enabled(hdev)) {
struct hci_cp_remote_oob_ext_data_reply cp;
bacpy(&cp.bdaddr, &ev->bdaddr);
if (hci_dev_test_flag(hdev, HCI_SC_ONLY)) {
memset(cp.hash192, 0, sizeof(cp.hash192));
memset(cp.rand192, 0, sizeof(cp.rand192));
} else {
memcpy(cp.hash192, data->hash192, sizeof(cp.hash192));
memcpy(cp.rand192, data->rand192, sizeof(cp.rand192));
}
memcpy(cp.hash256, data->hash256, sizeof(cp.hash256));
memcpy(cp.rand256, data->rand256, sizeof(cp.rand256));
hci_send_cmd(hdev, HCI_OP_REMOTE_OOB_EXT_DATA_REPLY,
sizeof(cp), &cp);
} else {
struct hci_cp_remote_oob_data_reply cp;
bacpy(&cp.bdaddr, &ev->bdaddr);
memcpy(cp.hash, data->hash192, sizeof(cp.hash));
memcpy(cp.rand, data->rand192, sizeof(cp.rand));
hci_send_cmd(hdev, HCI_OP_REMOTE_OOB_DATA_REPLY,
sizeof(cp), &cp);
}
unlock:
hci_dev_unlock(hdev);
}
static void hci_phy_link_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_phy_link_complete *ev = (void *) skb->data;
struct hci_conn *hcon, *bredr_hcon;
BT_DBG("%s handle 0x%2.2x status 0x%2.2x", hdev->name, ev->phy_handle,
ev->status);
hci_dev_lock(hdev);
hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle);
if (!hcon) {
hci_dev_unlock(hdev);
return;
}
if (ev->status) {
hci_conn_del(hcon);
hci_dev_unlock(hdev);
return;
}
bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;
hcon->state = BT_CONNECTED;
bacpy(&hcon->dst, &bredr_hcon->dst);
hci_conn_hold(hcon);
hcon->disc_timeout = HCI_DISCONN_TIMEOUT;
hci_conn_drop(hcon);
hci_debugfs_create_conn(hcon);
hci_conn_add_sysfs(hcon);
amp_physical_cfm(bredr_hcon, hcon);
hci_dev_unlock(hdev);
}
static void hci_loglink_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_logical_link_complete *ev = (void *) skb->data;
struct hci_conn *hcon;
struct hci_chan *hchan;
struct amp_mgr *mgr;
BT_DBG("%s log_handle 0x%4.4x phy_handle 0x%2.2x status 0x%2.2x",
hdev->name, le16_to_cpu(ev->handle), ev->phy_handle,
ev->status);
hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle);
if (!hcon)
return;
/* Create AMP hchan */
hchan = hci_chan_create(hcon);
if (!hchan)
return;
hchan->handle = le16_to_cpu(ev->handle);
BT_DBG("hcon %p mgr %p hchan %p", hcon, hcon->amp_mgr, hchan);
mgr = hcon->amp_mgr;
if (mgr && mgr->bredr_chan) {
struct l2cap_chan *bredr_chan = mgr->bredr_chan;
l2cap_chan_lock(bredr_chan);
bredr_chan->conn->mtu = hdev->block_mtu;
l2cap_logical_cfm(bredr_chan, hchan, 0);
hci_conn_hold(hcon);
l2cap_chan_unlock(bredr_chan);
}
}
static void hci_disconn_loglink_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_disconn_logical_link_complete *ev = (void *) skb->data;
struct hci_chan *hchan;
BT_DBG("%s log handle 0x%4.4x status 0x%2.2x", hdev->name,
le16_to_cpu(ev->handle), ev->status);
if (ev->status)
return;
hci_dev_lock(hdev);
hchan = hci_chan_lookup_handle(hdev, le16_to_cpu(ev->handle));
if (!hchan)
goto unlock;
amp_destroy_logical_link(hchan, ev->reason);
unlock:
hci_dev_unlock(hdev);
}
static void hci_disconn_phylink_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_disconn_phy_link_complete *ev = (void *) skb->data;
struct hci_conn *hcon;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
if (ev->status)
return;
hci_dev_lock(hdev);
hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle);
if (hcon) {
hcon->state = BT_CLOSED;
hci_conn_del(hcon);
}
hci_dev_unlock(hdev);
}
static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_le_conn_complete *ev = (void *) skb->data;
struct hci_conn_params *params;
struct hci_conn *conn;
struct smp_irk *irk;
u8 addr_type;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
hci_dev_lock(hdev);
/* All controllers implicitly stop advertising in the event of a
* connection, so ensure that the state bit is cleared.
*/
hci_dev_clear_flag(hdev, HCI_LE_ADV);
conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
if (!conn) {
conn = hci_conn_add(hdev, LE_LINK, &ev->bdaddr, ev->role);
if (!conn) {
BT_ERR("No memory for new connection");
goto unlock;
}
conn->dst_type = ev->bdaddr_type;
/* If we didn't have a hci_conn object previously
* but we're in master role this must be something
* initiated using a white list. Since white list based
* connections are not "first class citizens" we don't
* have full tracking of them. Therefore, we go ahead
* with a "best effort" approach of determining the
* initiator address based on the HCI_PRIVACY flag.
*/
if (conn->out) {
conn->resp_addr_type = ev->bdaddr_type;
bacpy(&conn->resp_addr, &ev->bdaddr);
if (hci_dev_test_flag(hdev, HCI_PRIVACY)) {
conn->init_addr_type = ADDR_LE_DEV_RANDOM;
bacpy(&conn->init_addr, &hdev->rpa);
} else {
hci_copy_identity_address(hdev,
&conn->init_addr,
&conn->init_addr_type);
}
}
} else {
cancel_delayed_work(&conn->le_conn_timeout);
}
if (!conn->out) {
/* Set the responder (our side) address type based on
* the advertising address type.
*/
conn->resp_addr_type = hdev->adv_addr_type;
if (hdev->adv_addr_type == ADDR_LE_DEV_RANDOM)
bacpy(&conn->resp_addr, &hdev->random_addr);
else
bacpy(&conn->resp_addr, &hdev->bdaddr);
conn->init_addr_type = ev->bdaddr_type;
bacpy(&conn->init_addr, &ev->bdaddr);
/* For incoming connections, set the default minimum
* and maximum connection interval. They will be used
* to check if the parameters are in range and if not
* trigger the connection update procedure.
*/
conn->le_conn_min_interval = hdev->le_conn_min_interval;
conn->le_conn_max_interval = hdev->le_conn_max_interval;
}
/* Lookup the identity address from the stored connection
* address and address type.
*
* When establishing connections to an identity address, the
* connection procedure will store the resolvable random
* address first. Now if it can be converted back into the
* identity address, start using the identity address from
* now on.
*/
irk = hci_get_irk(hdev, &conn->dst, conn->dst_type);
if (irk) {
bacpy(&conn->dst, &irk->bdaddr);
conn->dst_type = irk->addr_type;
}
if (ev->status) {
hci_le_conn_failed(conn, ev->status);
goto unlock;
}
if (conn->dst_type == ADDR_LE_DEV_PUBLIC)
addr_type = BDADDR_LE_PUBLIC;
else
addr_type = BDADDR_LE_RANDOM;
/* Drop the connection if the device is blocked */
if (hci_bdaddr_list_lookup(&hdev->blacklist, &conn->dst, addr_type)) {
hci_conn_drop(conn);
goto unlock;
}
if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
mgmt_device_connected(hdev, conn, 0, NULL, 0);
conn->sec_level = BT_SECURITY_LOW;
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
conn->le_conn_interval = le16_to_cpu(ev->interval);
conn->le_conn_latency = le16_to_cpu(ev->latency);
conn->le_supv_timeout = le16_to_cpu(ev->supervision_timeout);
hci_debugfs_create_conn(conn);
hci_conn_add_sysfs(conn);
hci_connect_cfm(conn, ev->status);
params = hci_pend_le_action_lookup(&hdev->pend_le_conns, &conn->dst,
conn->dst_type);
if (params) {
list_del_init(&params->action);
if (params->conn) {
hci_conn_drop(params->conn);
hci_conn_put(params->conn);
params->conn = NULL;
}
}
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
unlock:
hci_update_background_scan(hdev);
hci_dev_unlock(hdev);
}
static void hci_le_conn_update_complete_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_le_conn_update_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
if (ev->status)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn) {
conn->le_conn_interval = le16_to_cpu(ev->interval);
conn->le_conn_latency = le16_to_cpu(ev->latency);
conn->le_supv_timeout = le16_to_cpu(ev->supervision_timeout);
}
hci_dev_unlock(hdev);
}
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
/* This function requires the caller holds hdev->lock */
static struct hci_conn *check_pending_le_conn(struct hci_dev *hdev,
bdaddr_t *addr,
u8 addr_type, u8 adv_type)
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
{
struct hci_conn *conn;
struct hci_conn_params *params;
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
/* If the event is not connectable don't proceed further */
if (adv_type != LE_ADV_IND && adv_type != LE_ADV_DIRECT_IND)
return NULL;
/* Ignore if the device is blocked */
if (hci_bdaddr_list_lookup(&hdev->blacklist, addr, addr_type))
return NULL;
/* Most controller will fail if we try to create new connections
* while we have an existing one in slave role.
*/
if (hdev->conn_hash.le_num_slave > 0)
return NULL;
/* If we're not connectable only connect devices that we have in
* our pend_le_conns list.
*/
params = hci_pend_le_action_lookup(&hdev->pend_le_conns,
addr, addr_type);
if (!params)
return NULL;
switch (params->auto_connect) {
case HCI_AUTO_CONN_DIRECT:
/* Only devices advertising with ADV_DIRECT_IND are
* triggering a connection attempt. This is allowing
* incoming connections from slave devices.
*/
if (adv_type != LE_ADV_DIRECT_IND)
return NULL;
break;
case HCI_AUTO_CONN_ALWAYS:
/* Devices advertising with ADV_IND or ADV_DIRECT_IND
* are triggering a connection attempt. This means
* that incoming connectioms from slave device are
* accepted and also outgoing connections to slave
* devices are established when found.
*/
break;
default:
return NULL;
}
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
conn = hci_connect_le(hdev, addr, addr_type, BT_SECURITY_LOW,
HCI_LE_AUTOCONN_TIMEOUT, HCI_ROLE_MASTER);
if (!IS_ERR(conn)) {
/* Store the pointer since we don't really have any
* other owner of the object besides the params that
* triggered it. This way we can abort the connection if
* the parameters get removed and keep the reference
* count consistent once the connection is established.
*/
params->conn = hci_conn_get(conn);
return conn;
}
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
switch (PTR_ERR(conn)) {
case -EBUSY:
/* If hci_connect() returns -EBUSY it means there is already
* an LE connection attempt going on. Since controllers don't
* support more than one connection attempt at the time, we
* don't consider this an error case.
*/
break;
default:
BT_DBG("Failed to connect: err %ld", PTR_ERR(conn));
return NULL;
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
}
return NULL;
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
}
static void process_adv_report(struct hci_dev *hdev, u8 type, bdaddr_t *bdaddr,
u8 bdaddr_type, bdaddr_t *direct_addr,
u8 direct_addr_type, s8 rssi, u8 *data, u8 len)
{
struct discovery_state *d = &hdev->discovery;
struct smp_irk *irk;
struct hci_conn *conn;
bool match;
u32 flags;
/* If the direct address is present, then this report is from
* a LE Direct Advertising Report event. In that case it is
* important to see if the address is matching the local
* controller address.
*/
if (direct_addr) {
/* Only resolvable random addresses are valid for these
* kind of reports and others can be ignored.
*/
if (!hci_bdaddr_is_rpa(direct_addr, direct_addr_type))
return;
/* If the controller is not using resolvable random
* addresses, then this report can be ignored.
*/
if (!hci_dev_test_flag(hdev, HCI_PRIVACY))
return;
/* If the local IRK of the controller does not match
* with the resolvable random address provided, then
* this report can be ignored.
*/
if (!smp_irk_matches(hdev, hdev->irk, direct_addr))
return;
}
/* Check if we need to convert to identity address */
irk = hci_get_irk(hdev, bdaddr, bdaddr_type);
if (irk) {
bdaddr = &irk->bdaddr;
bdaddr_type = irk->addr_type;
}
/* Check if we have been requested to connect to this device */
conn = check_pending_le_conn(hdev, bdaddr, bdaddr_type, type);
if (conn && type == LE_ADV_IND) {
/* Store report for later inclusion by
* mgmt_device_connected
*/
memcpy(conn->le_adv_data, data, len);
conn->le_adv_data_len = len;
}
/* Passive scanning shouldn't trigger any device found events,
* except for devices marked as CONN_REPORT for which we do send
* device found events.
*/
if (hdev->le_scan_type == LE_SCAN_PASSIVE) {
if (type == LE_ADV_DIRECT_IND)
return;
if (!hci_pend_le_action_lookup(&hdev->pend_le_reports,
bdaddr, bdaddr_type))
return;
if (type == LE_ADV_NONCONN_IND || type == LE_ADV_SCAN_IND)
flags = MGMT_DEV_FOUND_NOT_CONNECTABLE;
else
flags = 0;
mgmt_device_found(hdev, bdaddr, LE_LINK, bdaddr_type, NULL,
rssi, flags, data, len, NULL, 0);
return;
}
/* When receiving non-connectable or scannable undirected
* advertising reports, this means that the remote device is
* not connectable and then clearly indicate this in the
* device found event.
*
* When receiving a scan response, then there is no way to
* know if the remote device is connectable or not. However
* since scan responses are merged with a previously seen
* advertising report, the flags field from that report
* will be used.
*
* In the really unlikely case that a controller get confused
* and just sends a scan response event, then it is marked as
* not connectable as well.
*/
if (type == LE_ADV_NONCONN_IND || type == LE_ADV_SCAN_IND ||
type == LE_ADV_SCAN_RSP)
flags = MGMT_DEV_FOUND_NOT_CONNECTABLE;
else
flags = 0;
/* If there's nothing pending either store the data from this
* event or send an immediate device found event if the data
* should not be stored for later.
*/
if (!has_pending_adv_report(hdev)) {
/* If the report will trigger a SCAN_REQ store it for
* later merging.
*/
if (type == LE_ADV_IND || type == LE_ADV_SCAN_IND) {
store_pending_adv_report(hdev, bdaddr, bdaddr_type,
rssi, flags, data, len);
return;
}
mgmt_device_found(hdev, bdaddr, LE_LINK, bdaddr_type, NULL,
rssi, flags, data, len, NULL, 0);
return;
}
/* Check if the pending report is for the same device as the new one */
match = (!bacmp(bdaddr, &d->last_adv_addr) &&
bdaddr_type == d->last_adv_addr_type);
/* If the pending data doesn't match this report or this isn't a
* scan response (e.g. we got a duplicate ADV_IND) then force
* sending of the pending data.
*/
if (type != LE_ADV_SCAN_RSP || !match) {
/* Send out whatever is in the cache, but skip duplicates */
if (!match)
mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK,
d->last_adv_addr_type, NULL,
d->last_adv_rssi, d->last_adv_flags,
d->last_adv_data,
d->last_adv_data_len, NULL, 0);
/* If the new report will trigger a SCAN_REQ store it for
* later merging.
*/
if (type == LE_ADV_IND || type == LE_ADV_SCAN_IND) {
store_pending_adv_report(hdev, bdaddr, bdaddr_type,
rssi, flags, data, len);
return;
}
/* The advertising reports cannot be merged, so clear
* the pending report and send out a device found event.
*/
clear_pending_adv_report(hdev);
mgmt_device_found(hdev, bdaddr, LE_LINK, bdaddr_type, NULL,
rssi, flags, data, len, NULL, 0);
return;
}
/* If we get here we've got a pending ADV_IND or ADV_SCAN_IND and
* the new event is a SCAN_RSP. We can therefore proceed with
* sending a merged device found event.
*/
mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK,
d->last_adv_addr_type, NULL, rssi, d->last_adv_flags,
d->last_adv_data, d->last_adv_data_len, data, len);
clear_pending_adv_report(hdev);
}
static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
u8 num_reports = skb->data[0];
void *ptr = &skb->data[1];
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
hci_dev_lock(hdev);
while (num_reports--) {
struct hci_ev_le_advertising_info *ev = ptr;
s8 rssi;
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
rssi = ev->data[ev->length];
process_adv_report(hdev, ev->evt_type, &ev->bdaddr,
ev->bdaddr_type, NULL, 0, rssi,
ev->data, ev->length);
ptr += sizeof(*ev) + ev->length + 1;
}
Bluetooth: Introduce LE auto connection infrastructure This patch introduces the LE auto connection infrastructure which will be used to implement the LE auto connection options. In summary, the auto connection mechanism works as follows: Once the first pending LE connection is created, the background scanning is started. When the target device is found in range, the kernel autonomously starts the connection attempt. If connection is established successfully, that pending LE connection is deleted and the background is stopped. To achieve that, this patch introduces the hci_update_background_scan() which controls the background scanning state. This function starts or stops the background scanning based on the hdev->pend_le_conns list. If there is no pending LE connection, the background scanning is stopped. Otherwise, we start the background scanning. Then, every time a pending LE connection is added we call hci_update_ background_scan() so the background scanning is started (in case it is not already running). Likewise, every time a pending LE connection is deleted we call hci_update_background_scan() so the background scanning is stopped (in case this was the last pending LE connection) or it is started again (in case we have more pending LE connections). Finally, we also call hci_update_background_scan() in hci_le_conn_failed() so the background scan is restarted in case the connection establishment fails. This way the background scanning keeps running until all pending LE connection are established. At this point, resolvable addresses are not support by this infrastructure. The proper support is added in upcoming patches. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-27 07:21:47 +08:00
hci_dev_unlock(hdev);
}
static void hci_le_ltk_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_le_ltk_req *ev = (void *) skb->data;
struct hci_cp_le_ltk_reply cp;
struct hci_cp_le_ltk_neg_reply neg;
struct hci_conn *conn;
struct smp_ltk *ltk;
BT_DBG("%s handle 0x%4.4x", hdev->name, __le16_to_cpu(ev->handle));
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn == NULL)
goto not_found;
ltk = hci_find_ltk(hdev, &conn->dst, conn->dst_type, conn->role);
if (!ltk)
goto not_found;
if (smp_ltk_is_sc(ltk)) {
/* With SC both EDiv and Rand are set to zero */
if (ev->ediv || ev->rand)
goto not_found;
} else {
/* For non-SC keys check that EDiv and Rand match */
if (ev->ediv != ltk->ediv || ev->rand != ltk->rand)
goto not_found;
}
memcpy(cp.ltk, ltk->val, sizeof(ltk->val));
cp.handle = cpu_to_le16(conn->handle);
conn->pending_sec_level = smp_ltk_sec_level(ltk);
conn->enc_key_size = ltk->enc_size;
hci_send_cmd(hdev, HCI_OP_LE_LTK_REPLY, sizeof(cp), &cp);
Bluetooth: Fix removing Long Term Key This patch fixes authentication failure on LE link re-connection when BlueZ acts as slave (peripheral). LTK is removed from the internal list after its first use causing PIN or Key missing reply when re-connecting the link. The LE Long Term Key Request event indicates that the master is attempting to encrypt or re-encrypt the link. Pre-condition: BlueZ host paired and running as slave. How to reproduce(master): 1) Establish an ACL LE encrypted link 2) Disconnect the link 3) Try to re-establish the ACL LE encrypted link (fails) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 2aa531db2fce9f00a0569c7d23d17409 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Reply (0x08|0x001a) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 64 Encryption: Enabled with AES-CCM (0x01) ... @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3 < HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1 Advertising: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertise Enable (0x08|0x000a) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2 Handle: 64 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 64 Reason: Authentication Failure (0x05) @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0 Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-07-26 03:34:24 +08:00
/* Ref. Bluetooth Core SPEC pages 1975 and 2004. STK is a
* temporary key used to encrypt a connection following
* pairing. It is used during the Encrypted Session Setup to
* distribute the keys. Later, security can be re-established
* using a distributed LTK.
*/
if (ltk->type == SMP_STK) {
set_bit(HCI_CONN_STK_ENCRYPT, &conn->flags);
list_del_rcu(&ltk->list);
kfree_rcu(ltk, rcu);
} else {
clear_bit(HCI_CONN_STK_ENCRYPT, &conn->flags);
}
hci_dev_unlock(hdev);
return;
not_found:
neg.handle = ev->handle;
hci_send_cmd(hdev, HCI_OP_LE_LTK_NEG_REPLY, sizeof(neg), &neg);
hci_dev_unlock(hdev);
}
static void send_conn_param_neg_reply(struct hci_dev *hdev, u16 handle,
u8 reason)
{
struct hci_cp_le_conn_param_req_neg_reply cp;
cp.handle = cpu_to_le16(handle);
cp.reason = reason;
hci_send_cmd(hdev, HCI_OP_LE_CONN_PARAM_REQ_NEG_REPLY, sizeof(cp),
&cp);
}
static void hci_le_remote_conn_param_req_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
struct hci_ev_le_remote_conn_param_req *ev = (void *) skb->data;
struct hci_cp_le_conn_param_req_reply cp;
struct hci_conn *hcon;
u16 handle, min, max, latency, timeout;
handle = le16_to_cpu(ev->handle);
min = le16_to_cpu(ev->interval_min);
max = le16_to_cpu(ev->interval_max);
latency = le16_to_cpu(ev->latency);
timeout = le16_to_cpu(ev->timeout);
hcon = hci_conn_hash_lookup_handle(hdev, handle);
if (!hcon || hcon->state != BT_CONNECTED)
return send_conn_param_neg_reply(hdev, handle,
HCI_ERROR_UNKNOWN_CONN_ID);
if (hci_check_conn_params(min, max, latency, timeout))
return send_conn_param_neg_reply(hdev, handle,
HCI_ERROR_INVALID_LL_PARAMS);
if (hcon->role == HCI_ROLE_MASTER) {
struct hci_conn_params *params;
u8 store_hint;
hci_dev_lock(hdev);
params = hci_conn_params_lookup(hdev, &hcon->dst,
hcon->dst_type);
if (params) {
params->conn_min_interval = min;
params->conn_max_interval = max;
params->conn_latency = latency;
params->supervision_timeout = timeout;
store_hint = 0x01;
} else{
store_hint = 0x00;
}
hci_dev_unlock(hdev);
mgmt_new_conn_param(hdev, &hcon->dst, hcon->dst_type,
store_hint, min, max, latency, timeout);
}
cp.handle = ev->handle;
cp.interval_min = ev->interval_min;
cp.interval_max = ev->interval_max;
cp.latency = ev->latency;
cp.timeout = ev->timeout;
cp.min_ce_len = 0;
cp.max_ce_len = 0;
hci_send_cmd(hdev, HCI_OP_LE_CONN_PARAM_REQ_REPLY, sizeof(cp), &cp);
}
static void hci_le_direct_adv_report_evt(struct hci_dev *hdev,
struct sk_buff *skb)
{
u8 num_reports = skb->data[0];
void *ptr = &skb->data[1];
hci_dev_lock(hdev);
while (num_reports--) {
struct hci_ev_le_direct_adv_info *ev = ptr;
process_adv_report(hdev, ev->evt_type, &ev->bdaddr,
ev->bdaddr_type, &ev->direct_addr,
ev->direct_addr_type, ev->rssi, NULL, 0);
ptr += sizeof(*ev);
}
hci_dev_unlock(hdev);
}
static void hci_le_meta_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_le_meta *le_ev = (void *) skb->data;
skb_pull(skb, sizeof(*le_ev));
switch (le_ev->subevent) {
case HCI_EV_LE_CONN_COMPLETE:
hci_le_conn_complete_evt(hdev, skb);
break;
case HCI_EV_LE_CONN_UPDATE_COMPLETE:
hci_le_conn_update_complete_evt(hdev, skb);
break;
case HCI_EV_LE_ADVERTISING_REPORT:
hci_le_adv_report_evt(hdev, skb);
break;
case HCI_EV_LE_LTK_REQ:
hci_le_ltk_request_evt(hdev, skb);
break;
case HCI_EV_LE_REMOTE_CONN_PARAM_REQ:
hci_le_remote_conn_param_req_evt(hdev, skb);
break;
case HCI_EV_LE_DIRECT_ADV_REPORT:
hci_le_direct_adv_report_evt(hdev, skb);
break;
default:
break;
}
}
static void hci_chan_selected_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_channel_selected *ev = (void *) skb->data;
struct hci_conn *hcon;
BT_DBG("%s handle 0x%2.2x", hdev->name, ev->phy_handle);
skb_pull(skb, sizeof(*ev));
hcon = hci_conn_hash_lookup_handle(hdev, ev->phy_handle);
if (!hcon)
return;
amp_read_loc_assoc_final_data(hdev, hcon);
}
void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_event_hdr *hdr = (void *) skb->data;
__u8 event = hdr->evt;
hci_dev_lock(hdev);
/* Received events are (currently) only needed when a request is
* ongoing so avoid unnecessary memory allocation.
*/
if (hci_req_pending(hdev)) {
kfree_skb(hdev->recv_evt);
hdev->recv_evt = skb_clone(skb, GFP_KERNEL);
}
hci_dev_unlock(hdev);
skb_pull(skb, HCI_EVENT_HDR_SIZE);
if (hdev->sent_cmd && bt_cb(hdev->sent_cmd)->req_event == event) {
struct hci_command_hdr *cmd_hdr = (void *) hdev->sent_cmd->data;
u16 opcode = __le16_to_cpu(cmd_hdr->opcode);
hci_req_cmd_complete(hdev, opcode, 0);
}
switch (event) {
case HCI_EV_INQUIRY_COMPLETE:
hci_inquiry_complete_evt(hdev, skb);
break;
case HCI_EV_INQUIRY_RESULT:
hci_inquiry_result_evt(hdev, skb);
break;
case HCI_EV_CONN_COMPLETE:
hci_conn_complete_evt(hdev, skb);
break;
case HCI_EV_CONN_REQUEST:
hci_conn_request_evt(hdev, skb);
break;
case HCI_EV_DISCONN_COMPLETE:
hci_disconn_complete_evt(hdev, skb);
break;
case HCI_EV_AUTH_COMPLETE:
hci_auth_complete_evt(hdev, skb);
break;
case HCI_EV_REMOTE_NAME:
hci_remote_name_evt(hdev, skb);
break;
case HCI_EV_ENCRYPT_CHANGE:
hci_encrypt_change_evt(hdev, skb);
break;
case HCI_EV_CHANGE_LINK_KEY_COMPLETE:
hci_change_link_key_complete_evt(hdev, skb);
break;
case HCI_EV_REMOTE_FEATURES:
hci_remote_features_evt(hdev, skb);
break;
case HCI_EV_CMD_COMPLETE:
hci_cmd_complete_evt(hdev, skb);
break;
case HCI_EV_CMD_STATUS:
hci_cmd_status_evt(hdev, skb);
break;
case HCI_EV_HARDWARE_ERROR:
hci_hardware_error_evt(hdev, skb);
break;
case HCI_EV_ROLE_CHANGE:
hci_role_change_evt(hdev, skb);
break;
case HCI_EV_NUM_COMP_PKTS:
hci_num_comp_pkts_evt(hdev, skb);
break;
case HCI_EV_MODE_CHANGE:
hci_mode_change_evt(hdev, skb);
break;
case HCI_EV_PIN_CODE_REQ:
hci_pin_code_request_evt(hdev, skb);
break;
case HCI_EV_LINK_KEY_REQ:
hci_link_key_request_evt(hdev, skb);
break;
case HCI_EV_LINK_KEY_NOTIFY:
hci_link_key_notify_evt(hdev, skb);
break;
case HCI_EV_CLOCK_OFFSET:
hci_clock_offset_evt(hdev, skb);
break;
case HCI_EV_PKT_TYPE_CHANGE:
hci_pkt_type_change_evt(hdev, skb);
break;
case HCI_EV_PSCAN_REP_MODE:
hci_pscan_rep_mode_evt(hdev, skb);
break;
case HCI_EV_INQUIRY_RESULT_WITH_RSSI:
hci_inquiry_result_with_rssi_evt(hdev, skb);
break;
case HCI_EV_REMOTE_EXT_FEATURES:
hci_remote_ext_features_evt(hdev, skb);
break;
case HCI_EV_SYNC_CONN_COMPLETE:
hci_sync_conn_complete_evt(hdev, skb);
break;
case HCI_EV_EXTENDED_INQUIRY_RESULT:
hci_extended_inquiry_result_evt(hdev, skb);
break;
case HCI_EV_KEY_REFRESH_COMPLETE:
hci_key_refresh_complete_evt(hdev, skb);
break;
case HCI_EV_IO_CAPA_REQUEST:
hci_io_capa_request_evt(hdev, skb);
break;
case HCI_EV_IO_CAPA_REPLY:
hci_io_capa_reply_evt(hdev, skb);
break;
case HCI_EV_USER_CONFIRM_REQUEST:
hci_user_confirm_request_evt(hdev, skb);
break;
case HCI_EV_USER_PASSKEY_REQUEST:
hci_user_passkey_request_evt(hdev, skb);
break;
case HCI_EV_USER_PASSKEY_NOTIFY:
hci_user_passkey_notify_evt(hdev, skb);
break;
case HCI_EV_KEYPRESS_NOTIFY:
hci_keypress_notify_evt(hdev, skb);
break;
case HCI_EV_SIMPLE_PAIR_COMPLETE:
hci_simple_pair_complete_evt(hdev, skb);
break;
case HCI_EV_REMOTE_HOST_FEATURES:
hci_remote_host_features_evt(hdev, skb);
break;
case HCI_EV_LE_META:
hci_le_meta_evt(hdev, skb);
break;
case HCI_EV_CHANNEL_SELECTED:
hci_chan_selected_evt(hdev, skb);
break;
case HCI_EV_REMOTE_OOB_DATA_REQUEST:
hci_remote_oob_data_request_evt(hdev, skb);
break;
case HCI_EV_PHY_LINK_COMPLETE:
hci_phy_link_complete_evt(hdev, skb);
break;
case HCI_EV_LOGICAL_LINK_COMPLETE:
hci_loglink_complete_evt(hdev, skb);
break;
case HCI_EV_DISCONN_LOGICAL_LINK_COMPLETE:
hci_disconn_loglink_complete_evt(hdev, skb);
break;
case HCI_EV_DISCONN_PHY_LINK_COMPLETE:
hci_disconn_phylink_complete_evt(hdev, skb);
break;
case HCI_EV_NUM_COMP_BLOCKS:
hci_num_comp_blocks_evt(hdev, skb);
break;
default:
BT_DBG("%s event 0x%2.2x", hdev->name, event);
break;
}
kfree_skb(skb);
hdev->stat.evt_rx++;
}