OpenCloudOS-Kernel/net/mpls/mpls_iptunnel.c

306 lines
7.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* mpls tunnels An implementation mpls tunnels using the light weight tunnel
* infrastructure
*
* Authors: Roopa Prabhu, <roopa@cumulusnetworks.com>
*/
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/net.h>
#include <linux/module.h>
#include <linux/mpls.h>
#include <linux/vmalloc.h>
#include <net/ip.h>
#include <net/dst.h>
#include <net/lwtunnel.h>
#include <net/netevent.h>
#include <net/netns/generic.h>
#include <net/ip6_fib.h>
#include <net/route.h>
#include <net/mpls_iptunnel.h>
#include <linux/mpls_iptunnel.h>
#include "internal.h"
static const struct nla_policy mpls_iptunnel_policy[MPLS_IPTUNNEL_MAX + 1] = {
[MPLS_IPTUNNEL_DST] = { .len = sizeof(u32) },
[MPLS_IPTUNNEL_TTL] = { .type = NLA_U8 },
};
static unsigned int mpls_encap_size(struct mpls_iptunnel_encap *en)
{
/* The size of the layer 2.5 labels to be added for this route */
return en->labels * sizeof(struct mpls_shim_hdr);
}
static int mpls_xmit(struct sk_buff *skb)
{
struct mpls_iptunnel_encap *tun_encap_info;
struct mpls_shim_hdr *hdr;
struct net_device *out_dev;
unsigned int hh_len;
unsigned int new_header_size;
unsigned int mtu;
struct dst_entry *dst = skb_dst(skb);
struct rtable *rt = NULL;
struct rt6_info *rt6 = NULL;
struct mpls_dev *out_mdev;
struct net *net;
int err = 0;
bool bos;
int i;
unsigned int ttl;
/* Find the output device */
out_dev = dst->dev;
net = dev_net(out_dev);
skb_orphan(skb);
if (!mpls_output_possible(out_dev) ||
!dst->lwtstate || skb_warn_if_lro(skb))
goto drop;
skb_forward_csum(skb);
tun_encap_info = mpls_lwtunnel_encap(dst->lwtstate);
/* Obtain the ttl using the following set of rules.
*
* LWT ttl propagation setting:
* - disabled => use default TTL value from LWT
* - enabled => use TTL value from IPv4/IPv6 header
* - default =>
* Global ttl propagation setting:
* - disabled => use default TTL value from global setting
* - enabled => use TTL value from IPv4/IPv6 header
*/
if (dst->ops->family == AF_INET) {
if (tun_encap_info->ttl_propagate == MPLS_TTL_PROP_DISABLED)
ttl = tun_encap_info->default_ttl;
else if (tun_encap_info->ttl_propagate == MPLS_TTL_PROP_DEFAULT &&
!net->mpls.ip_ttl_propagate)
ttl = net->mpls.default_ttl;
else
ttl = ip_hdr(skb)->ttl;
rt = (struct rtable *)dst;
} else if (dst->ops->family == AF_INET6) {
if (tun_encap_info->ttl_propagate == MPLS_TTL_PROP_DISABLED)
ttl = tun_encap_info->default_ttl;
else if (tun_encap_info->ttl_propagate == MPLS_TTL_PROP_DEFAULT &&
!net->mpls.ip_ttl_propagate)
ttl = net->mpls.default_ttl;
else
ttl = ipv6_hdr(skb)->hop_limit;
rt6 = (struct rt6_info *)dst;
} else {
goto drop;
}
/* Verify the destination can hold the packet */
new_header_size = mpls_encap_size(tun_encap_info);
mtu = mpls_dev_mtu(out_dev);
if (mpls_pkt_too_big(skb, mtu - new_header_size))
goto drop;
hh_len = LL_RESERVED_SPACE(out_dev);
if (!out_dev->header_ops)
hh_len = 0;
/* Ensure there is enough space for the headers in the skb */
if (skb_cow(skb, hh_len + new_header_size))
goto drop;
net: mpls: Fixups for GSO As reported by Lennert the MPLS GSO code is failing to properly segment large packets. There are a couple of problems: 1. the inner protocol is not set so the gso segment functions for inner protocol layers are not getting run, and 2 MPLS labels for packets that use the "native" (non-OVS) MPLS code are not properly accounted for in mpls_gso_segment. The MPLS GSO code was added for OVS. It is re-using skb_mac_gso_segment to call the gso segment functions for the higher layer protocols. That means skb_mac_gso_segment is called twice -- once with the network protocol set to MPLS and again with the network protocol set to the inner protocol. This patch sets the inner skb protocol addressing item 1 above and sets the network_header and inner_network_header to mark where the MPLS labels start and end. The MPLS code in OVS is also updated to set the two network markers. >From there the MPLS GSO code uses the difference between the network header and the inner network header to know the size of the MPLS header that was pushed. It then pulls the MPLS header, resets the mac_len and protocol for the inner protocol and then calls skb_mac_gso_segment to segment the skb. Afterward the inner protocol segmentation is done the skb protocol is set to mpls for each segment and the network and mac headers restored. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25 11:10:44 +08:00
skb_set_inner_protocol(skb, skb->protocol);
skb_reset_inner_network_header(skb);
skb_push(skb, new_header_size);
net: mpls: Fixups for GSO As reported by Lennert the MPLS GSO code is failing to properly segment large packets. There are a couple of problems: 1. the inner protocol is not set so the gso segment functions for inner protocol layers are not getting run, and 2 MPLS labels for packets that use the "native" (non-OVS) MPLS code are not properly accounted for in mpls_gso_segment. The MPLS GSO code was added for OVS. It is re-using skb_mac_gso_segment to call the gso segment functions for the higher layer protocols. That means skb_mac_gso_segment is called twice -- once with the network protocol set to MPLS and again with the network protocol set to the inner protocol. This patch sets the inner skb protocol addressing item 1 above and sets the network_header and inner_network_header to mark where the MPLS labels start and end. The MPLS code in OVS is also updated to set the two network markers. >From there the MPLS GSO code uses the difference between the network header and the inner network header to know the size of the MPLS header that was pushed. It then pulls the MPLS header, resets the mac_len and protocol for the inner protocol and then calls skb_mac_gso_segment to segment the skb. Afterward the inner protocol segmentation is done the skb protocol is set to mpls for each segment and the network and mac headers restored. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25 11:10:44 +08:00
skb_reset_network_header(skb);
skb->dev = out_dev;
skb->protocol = htons(ETH_P_MPLS_UC);
/* Push the new labels */
hdr = mpls_hdr(skb);
bos = true;
for (i = tun_encap_info->labels - 1; i >= 0; i--) {
hdr[i] = mpls_entry_encode(tun_encap_info->label[i],
ttl, 0, bos);
bos = false;
}
mpls_stats_inc_outucastpkts(out_dev, skb);
if (rt) {
if (rt->rt_gw_family == AF_INET6)
err = neigh_xmit(NEIGH_ND_TABLE, out_dev, &rt->rt_gw6,
skb);
else
err = neigh_xmit(NEIGH_ARP_TABLE, out_dev, &rt->rt_gw4,
skb);
} else if (rt6) {
mpls: Fix 6PE forwarding This patch adds support for 6PE (RFC 4798) which uses IPv4-mapped IPv6 nexthop to connect IPv6 islands over IPv4 only MPLS network core. Prior to this fix, to find the link-layer destination mac address, 6PE enabled host/router was sending IPv6 ND requests for IPv4-mapped IPv6 nexthop address over the interface facing the IPv4 only core which wouldn't success as the core is IPv6 free. This fix changes that behavior on 6PE host to treat the nexthop as IPv4 address and send ARP requests whenever the next-hop address is an IPv4-mapped IPv6 address. Below topology illustrates the issue and how the patch addresses it. abcd::1.1.1.1 (lo) abcd::2.2.2.2 (lo) R0 (PE/host)------------------------R1--------------------------------R2 (PE/host) <--- IPv4 MPLS core ---> <------ IPv4 MPLS core --------> eth1 eth2 eth3 eth4 172.18.0.10 172.18.0.11 172.19.0.11 172.19.0.12 ffff::172.18.0.10 ffff::172.19.0.12 <------------------IPv6 MPLS tunnel ----------------------> R0 and R2 act as 6PE routers of IPv6 islands. R1 is IPv4 only with MPLS tunnels between R0,R1 and R1,R2. docker exec r0 ip -f inet6 route add abcd::2.2.2.2/128 nexthop encap mpls 100 via ::ffff:172.18.0.11 dev eth1 docker exec r2 ip -f inet6 route add abcd::1.1.1.1/128 nexthop encap mpls 200 via ::ffff:172.19.0.11 dev eth4 docker exec r1 ip -f mpls route add 100 via inet 172.19.0.12 dev eth3 docker exec r1 ip -f mpls route add 200 via inet 172.18.0.10 dev eth2 With the change, when R0 sends an IPv6 packet over MPLS tunnel to abcd::2.2.2.2, using ::ffff:172.18.0.11 as the nexthop, it does neighbor discovery for 172.18.18.0.11. Signed-off-by: Vinay K Nallamothu <nvinay@juniper.net> Tested-by: Avinash Lingala <ar977m@att.com> Tested-by: Aravind Srinivas Srinivasa Prabhakar <aprabh@juniper.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 06:41:18 +08:00
if (ipv6_addr_v4mapped(&rt6->rt6i_gateway)) {
/* 6PE (RFC 4798) */
err = neigh_xmit(NEIGH_ARP_TABLE, out_dev, &rt6->rt6i_gateway.s6_addr32[3],
skb);
} else
err = neigh_xmit(NEIGH_ND_TABLE, out_dev, &rt6->rt6i_gateway,
skb);
}
if (err)
net_dbg_ratelimited("%s: packet transmission failed: %d\n",
__func__, err);
return LWTUNNEL_XMIT_DONE;
drop:
out_mdev = out_dev ? mpls_dev_get(out_dev) : NULL;
if (out_mdev)
MPLS_INC_STATS(out_mdev, tx_errors);
kfree_skb(skb);
return -EINVAL;
}
static int mpls_build_state(struct net *net, struct nlattr *nla,
unsigned int family, const void *cfg,
struct lwtunnel_state **ts,
struct netlink_ext_ack *extack)
{
struct mpls_iptunnel_encap *tun_encap_info;
struct nlattr *tb[MPLS_IPTUNNEL_MAX + 1];
struct lwtunnel_state *newts;
u8 n_labels;
int ret;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 20:07:28 +08:00
ret = nla_parse_nested_deprecated(tb, MPLS_IPTUNNEL_MAX, nla,
mpls_iptunnel_policy, extack);
if (ret < 0)
return ret;
if (!tb[MPLS_IPTUNNEL_DST]) {
NL_SET_ERR_MSG(extack, "MPLS_IPTUNNEL_DST attribute is missing");
return -EINVAL;
}
/* determine number of labels */
if (nla_get_labels(tb[MPLS_IPTUNNEL_DST], MAX_NEW_LABELS,
&n_labels, NULL, extack))
return -EINVAL;
newts = lwtunnel_state_alloc(struct_size(tun_encap_info, label,
n_labels));
if (!newts)
return -ENOMEM;
tun_encap_info = mpls_lwtunnel_encap(newts);
ret = nla_get_labels(tb[MPLS_IPTUNNEL_DST], n_labels,
&tun_encap_info->labels, tun_encap_info->label,
extack);
if (ret)
goto errout;
tun_encap_info->ttl_propagate = MPLS_TTL_PROP_DEFAULT;
if (tb[MPLS_IPTUNNEL_TTL]) {
tun_encap_info->default_ttl = nla_get_u8(tb[MPLS_IPTUNNEL_TTL]);
/* TTL 0 implies propagate from IP header */
tun_encap_info->ttl_propagate = tun_encap_info->default_ttl ?
MPLS_TTL_PROP_DISABLED :
MPLS_TTL_PROP_ENABLED;
}
newts->type = LWTUNNEL_ENCAP_MPLS;
newts->flags |= LWTUNNEL_STATE_XMIT_REDIRECT;
newts->headroom = mpls_encap_size(tun_encap_info);
*ts = newts;
return 0;
errout:
kfree(newts);
*ts = NULL;
return ret;
}
static int mpls_fill_encap_info(struct sk_buff *skb,
struct lwtunnel_state *lwtstate)
{
struct mpls_iptunnel_encap *tun_encap_info;
tun_encap_info = mpls_lwtunnel_encap(lwtstate);
if (nla_put_labels(skb, MPLS_IPTUNNEL_DST, tun_encap_info->labels,
tun_encap_info->label))
goto nla_put_failure;
if (tun_encap_info->ttl_propagate != MPLS_TTL_PROP_DEFAULT &&
nla_put_u8(skb, MPLS_IPTUNNEL_TTL, tun_encap_info->default_ttl))
goto nla_put_failure;
return 0;
nla_put_failure:
return -EMSGSIZE;
}
static int mpls_encap_nlsize(struct lwtunnel_state *lwtstate)
{
struct mpls_iptunnel_encap *tun_encap_info;
int nlsize;
tun_encap_info = mpls_lwtunnel_encap(lwtstate);
nlsize = nla_total_size(tun_encap_info->labels * 4);
if (tun_encap_info->ttl_propagate != MPLS_TTL_PROP_DEFAULT)
nlsize += nla_total_size(1);
return nlsize;
}
static int mpls_encap_cmp(struct lwtunnel_state *a, struct lwtunnel_state *b)
{
struct mpls_iptunnel_encap *a_hdr = mpls_lwtunnel_encap(a);
struct mpls_iptunnel_encap *b_hdr = mpls_lwtunnel_encap(b);
int l;
if (a_hdr->labels != b_hdr->labels ||
a_hdr->ttl_propagate != b_hdr->ttl_propagate ||
a_hdr->default_ttl != b_hdr->default_ttl)
return 1;
for (l = 0; l < a_hdr->labels; l++)
if (a_hdr->label[l] != b_hdr->label[l])
return 1;
return 0;
}
static const struct lwtunnel_encap_ops mpls_iptun_ops = {
.build_state = mpls_build_state,
.xmit = mpls_xmit,
.fill_encap = mpls_fill_encap_info,
.get_encap_size = mpls_encap_nlsize,
.cmp_encap = mpls_encap_cmp,
.owner = THIS_MODULE,
};
static int __init mpls_iptunnel_init(void)
{
return lwtunnel_encap_add_ops(&mpls_iptun_ops, LWTUNNEL_ENCAP_MPLS);
}
module_init(mpls_iptunnel_init);
static void __exit mpls_iptunnel_exit(void)
{
lwtunnel_encap_del_ops(&mpls_iptun_ops, LWTUNNEL_ENCAP_MPLS);
}
module_exit(mpls_iptunnel_exit);
MODULE_ALIAS_RTNL_LWT(MPLS);
MODULE_SOFTDEP("post: mpls_gso");
MODULE_DESCRIPTION("MultiProtocol Label Switching IP Tunnels");
MODULE_LICENSE("GPL v2");