OpenCloudOS-Kernel/drivers/net/wireless/wl1251/spi.c

356 lines
7.3 KiB
C
Raw Normal View History

/*
* This file is part of wl1251
*
* Copyright (C) 2008 Nokia Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/wl12xx.h>
#include "wl1251.h"
#include "reg.h"
#include "spi.h"
wl1251: make irq handling interface specific In SDIO, the host driver requests the IRQ and invokes a callback to the card driver. This differs from SPI, so the relevant code needs to be interface-specific. This patch pushes the irq code down into _spi.c and _sdio.c, and adds enable/disable callbacks. This fixes the following warning: [ 566.343887] ------------[ cut here ]------------ [ 566.349105] WARNING: at kernel/irq/manage.c:222 __enable_irq+0x3c/0x6c() [ 566.356735] Unbalanced enable for IRQ 0 [ 566.361099] Modules linked in: msm_wifi wl12xx_sdio wl12xx mac80211 cfg80211 rfkill_backport lib80211_crypt_ccmp lib80211_crypt_wep lib80211_crypt_tkip lib80211 [ 566.381240] [<c025acec>] (dump_stack+0x0/0x14) from [<c004b610>] (warn_slowpath+0x70/0x8c) [ 566.391860] [<c004b5a0>] (warn_slowpath+0x0/0x8c) from [<c0077c10>] (__enable_irq+0x3c/0x6c) [ 566.402572] r3:00000000 r2:c02cad13 [ 566.407516] r7:00001002 r6:00000000 r5:c0310be4 r4:c0310be4 [ 566.415786] [<c0077bd4>] (__enable_irq+0x0/0x6c) from [<c0077fd0>] (enable_irq+0x38/0x64) [ 566.425826] r5:c0310be4 r4:a0000013 [ 566.430709] [<c0077f98>] (enable_irq+0x0/0x64) from [<bf0dfa78>] (wl12xx_boot_run_firmware+0xfc/0x170 [wl12xx]) [ 566.442947] r7:00001002 r6:c440a9fc r5:00000072 r4:c440a9e0 [ 566.450851] [<bf0df97c>] (wl12xx_boot_run_firmware+0x0/0x170 [wl12xx]) from [<bf0e05f0>] (wl1251_boot+0xd4/0x108 [wl12xx]) [ 566.464492] r5:00000000 r4:c440a9e0 [ 566.469466] [<bf0e051c>] (wl1251_boot+0x0/0x108 [wl12xx]) from [<bf0dd27c>] (wl12xx_op_start+0x54/0xb8 [wl12xx]) [ 566.482162] r5:00000000 r4:c440a9e0 [ 566.487472] [<bf0dd228>] (wl12xx_op_start+0x0/0xb8 [wl12xx]) from [<bf0b96dc>] (ieee80211_open+0x2dc/0x720 [mac80211]) [ 566.500594] r7:00001002 r6:c4950800 r5:c440a220 r4:00000000 [ 566.508865] [<bf0b9400>] (ieee80211_open+0x0/0x720 [mac80211]) from [<c01f1edc>] (dev_open+0x9c/0xfc) [ 566.520705] [<c01f1e40>] (dev_open+0x0/0xfc) from [<c01f17dc>] (dev_change_flags+0x98/0x170) [ 566.531417] r5:00000041 r4:c4950800 [ 566.536330] [<c01f1744>] (dev_change_flags+0x0/0x170) from [<c023041c>] (devinet_ioctl+0x3a8/0x784) [ 566.547683] r7:c128e380 r6:00000001 r5:00008914 r4:00000000 [ 566.555587] [<c0230074>] (devinet_ioctl+0x0/0x784) from [<c02318cc>] (inet_ioctl+0xdc/0x114) [ 566.566299] [<c02317f0>] (inet_ioctl+0x0/0x114) from [<c01e1a60>] (sock_ioctl+0x1f0/0x248) [ 566.576827] r5:00008914 r4:c572c1a0 [ 566.581771] [<c01e1870>] (sock_ioctl+0x0/0x248) from [<c00b23a0>] (vfs_ioctl+0x34/0x94) [ 566.592086] r7:c572c1a0 r6:bee497e8 r5:00008914 r4:c572c1a0 [ 566.599990] [<c00b236c>] (vfs_ioctl+0x0/0x94) from [<c00b2a28>] (do_vfs_ioctl+0x52c/0x584) [ 566.610549] r7:c572c1a0 r6:00008914 r5:c572c1a0 r4:c3201228 [ 566.618453] [<c00b24fc>] (do_vfs_ioctl+0x0/0x584) from [<c00b2ac0>] (sys_ioctl+0x40/0x64) [ 566.628890] [<c00b2a80>] (sys_ioctl+0x0/0x64) from [<c0021da0>] (ret_fast_syscall+0x0/0x2c) [ 566.639541] r7:00000036 r6:00000000 r5:00000004 r4:001a11f3 [ 566.647445] ---[ end trace 15c26ef7dd5e7b03 ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 18:33:49 +08:00
static irqreturn_t wl1251_irq(int irq, void *cookie)
{
struct wl1251 *wl;
wl1251_debug(DEBUG_IRQ, "IRQ");
wl = cookie;
ieee80211_queue_work(wl->hw, &wl->irq_work);
wl1251: make irq handling interface specific In SDIO, the host driver requests the IRQ and invokes a callback to the card driver. This differs from SPI, so the relevant code needs to be interface-specific. This patch pushes the irq code down into _spi.c and _sdio.c, and adds enable/disable callbacks. This fixes the following warning: [ 566.343887] ------------[ cut here ]------------ [ 566.349105] WARNING: at kernel/irq/manage.c:222 __enable_irq+0x3c/0x6c() [ 566.356735] Unbalanced enable for IRQ 0 [ 566.361099] Modules linked in: msm_wifi wl12xx_sdio wl12xx mac80211 cfg80211 rfkill_backport lib80211_crypt_ccmp lib80211_crypt_wep lib80211_crypt_tkip lib80211 [ 566.381240] [<c025acec>] (dump_stack+0x0/0x14) from [<c004b610>] (warn_slowpath+0x70/0x8c) [ 566.391860] [<c004b5a0>] (warn_slowpath+0x0/0x8c) from [<c0077c10>] (__enable_irq+0x3c/0x6c) [ 566.402572] r3:00000000 r2:c02cad13 [ 566.407516] r7:00001002 r6:00000000 r5:c0310be4 r4:c0310be4 [ 566.415786] [<c0077bd4>] (__enable_irq+0x0/0x6c) from [<c0077fd0>] (enable_irq+0x38/0x64) [ 566.425826] r5:c0310be4 r4:a0000013 [ 566.430709] [<c0077f98>] (enable_irq+0x0/0x64) from [<bf0dfa78>] (wl12xx_boot_run_firmware+0xfc/0x170 [wl12xx]) [ 566.442947] r7:00001002 r6:c440a9fc r5:00000072 r4:c440a9e0 [ 566.450851] [<bf0df97c>] (wl12xx_boot_run_firmware+0x0/0x170 [wl12xx]) from [<bf0e05f0>] (wl1251_boot+0xd4/0x108 [wl12xx]) [ 566.464492] r5:00000000 r4:c440a9e0 [ 566.469466] [<bf0e051c>] (wl1251_boot+0x0/0x108 [wl12xx]) from [<bf0dd27c>] (wl12xx_op_start+0x54/0xb8 [wl12xx]) [ 566.482162] r5:00000000 r4:c440a9e0 [ 566.487472] [<bf0dd228>] (wl12xx_op_start+0x0/0xb8 [wl12xx]) from [<bf0b96dc>] (ieee80211_open+0x2dc/0x720 [mac80211]) [ 566.500594] r7:00001002 r6:c4950800 r5:c440a220 r4:00000000 [ 566.508865] [<bf0b9400>] (ieee80211_open+0x0/0x720 [mac80211]) from [<c01f1edc>] (dev_open+0x9c/0xfc) [ 566.520705] [<c01f1e40>] (dev_open+0x0/0xfc) from [<c01f17dc>] (dev_change_flags+0x98/0x170) [ 566.531417] r5:00000041 r4:c4950800 [ 566.536330] [<c01f1744>] (dev_change_flags+0x0/0x170) from [<c023041c>] (devinet_ioctl+0x3a8/0x784) [ 566.547683] r7:c128e380 r6:00000001 r5:00008914 r4:00000000 [ 566.555587] [<c0230074>] (devinet_ioctl+0x0/0x784) from [<c02318cc>] (inet_ioctl+0xdc/0x114) [ 566.566299] [<c02317f0>] (inet_ioctl+0x0/0x114) from [<c01e1a60>] (sock_ioctl+0x1f0/0x248) [ 566.576827] r5:00008914 r4:c572c1a0 [ 566.581771] [<c01e1870>] (sock_ioctl+0x0/0x248) from [<c00b23a0>] (vfs_ioctl+0x34/0x94) [ 566.592086] r7:c572c1a0 r6:bee497e8 r5:00008914 r4:c572c1a0 [ 566.599990] [<c00b236c>] (vfs_ioctl+0x0/0x94) from [<c00b2a28>] (do_vfs_ioctl+0x52c/0x584) [ 566.610549] r7:c572c1a0 r6:00008914 r5:c572c1a0 r4:c3201228 [ 566.618453] [<c00b24fc>] (do_vfs_ioctl+0x0/0x584) from [<c00b2ac0>] (sys_ioctl+0x40/0x64) [ 566.628890] [<c00b2a80>] (sys_ioctl+0x0/0x64) from [<c0021da0>] (ret_fast_syscall+0x0/0x2c) [ 566.639541] r7:00000036 r6:00000000 r5:00000004 r4:001a11f3 [ 566.647445] ---[ end trace 15c26ef7dd5e7b03 ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 18:33:49 +08:00
return IRQ_HANDLED;
}
static struct spi_device *wl_to_spi(struct wl1251 *wl)
{
return wl->if_priv;
}
static void wl1251_spi_reset(struct wl1251 *wl)
{
u8 *cmd;
struct spi_transfer t;
struct spi_message m;
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
if (!cmd) {
wl1251_error("could not allocate cmd for spi reset");
return;
}
memset(&t, 0, sizeof(t));
spi_message_init(&m);
memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
t.tx_buf = cmd;
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
}
static void wl1251_spi_wake(struct wl1251 *wl)
{
u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
struct spi_transfer t;
struct spi_message m;
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
if (!cmd) {
wl1251_error("could not allocate cmd for spi init");
return;
}
memset(crc, 0, sizeof(crc));
memset(&t, 0, sizeof(t));
spi_message_init(&m);
/*
* Set WSPI_INIT_COMMAND
* the data is being send from the MSB to LSB
*/
cmd[2] = 0xff;
cmd[3] = 0xff;
cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
cmd[0] = 0;
cmd[7] = 0;
cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
else
cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
crc[0] = cmd[1];
crc[1] = cmd[0];
crc[2] = cmd[7];
crc[3] = cmd[6];
crc[4] = cmd[5];
cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
cmd[4] |= WSPI_INIT_CMD_END;
t.tx_buf = cmd;
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
}
static void wl1251_spi_reset_wake(struct wl1251 *wl)
{
wl1251_spi_reset(wl);
wl1251_spi_wake(wl);
}
static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
size_t len)
{
struct spi_transfer t[3];
struct spi_message m;
u8 *busy_buf;
u32 *cmd;
cmd = &wl->buffer_cmd;
busy_buf = wl->buffer_busyword;
*cmd = 0;
*cmd |= WSPI_CMD_READ;
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].len = 4;
spi_message_add_tail(&t[0], &m);
/* Busy and non busy words read */
t[1].rx_buf = busy_buf;
t[1].len = WL1251_BUSY_WORD_LEN;
spi_message_add_tail(&t[1], &m);
t[2].rx_buf = buf;
t[2].len = len;
spi_message_add_tail(&t[2], &m);
spi_sync(wl_to_spi(wl), &m);
/* FIXME: check busy words */
wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
}
static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
size_t len)
{
struct spi_transfer t[2];
struct spi_message m;
u32 *cmd;
cmd = &wl->buffer_cmd;
*cmd = 0;
*cmd |= WSPI_CMD_WRITE;
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].len = sizeof(*cmd);
spi_message_add_tail(&t[0], &m);
t[1].tx_buf = buf;
t[1].len = len;
spi_message_add_tail(&t[1], &m);
spi_sync(wl_to_spi(wl), &m);
wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
}
wl1251: make irq handling interface specific In SDIO, the host driver requests the IRQ and invokes a callback to the card driver. This differs from SPI, so the relevant code needs to be interface-specific. This patch pushes the irq code down into _spi.c and _sdio.c, and adds enable/disable callbacks. This fixes the following warning: [ 566.343887] ------------[ cut here ]------------ [ 566.349105] WARNING: at kernel/irq/manage.c:222 __enable_irq+0x3c/0x6c() [ 566.356735] Unbalanced enable for IRQ 0 [ 566.361099] Modules linked in: msm_wifi wl12xx_sdio wl12xx mac80211 cfg80211 rfkill_backport lib80211_crypt_ccmp lib80211_crypt_wep lib80211_crypt_tkip lib80211 [ 566.381240] [<c025acec>] (dump_stack+0x0/0x14) from [<c004b610>] (warn_slowpath+0x70/0x8c) [ 566.391860] [<c004b5a0>] (warn_slowpath+0x0/0x8c) from [<c0077c10>] (__enable_irq+0x3c/0x6c) [ 566.402572] r3:00000000 r2:c02cad13 [ 566.407516] r7:00001002 r6:00000000 r5:c0310be4 r4:c0310be4 [ 566.415786] [<c0077bd4>] (__enable_irq+0x0/0x6c) from [<c0077fd0>] (enable_irq+0x38/0x64) [ 566.425826] r5:c0310be4 r4:a0000013 [ 566.430709] [<c0077f98>] (enable_irq+0x0/0x64) from [<bf0dfa78>] (wl12xx_boot_run_firmware+0xfc/0x170 [wl12xx]) [ 566.442947] r7:00001002 r6:c440a9fc r5:00000072 r4:c440a9e0 [ 566.450851] [<bf0df97c>] (wl12xx_boot_run_firmware+0x0/0x170 [wl12xx]) from [<bf0e05f0>] (wl1251_boot+0xd4/0x108 [wl12xx]) [ 566.464492] r5:00000000 r4:c440a9e0 [ 566.469466] [<bf0e051c>] (wl1251_boot+0x0/0x108 [wl12xx]) from [<bf0dd27c>] (wl12xx_op_start+0x54/0xb8 [wl12xx]) [ 566.482162] r5:00000000 r4:c440a9e0 [ 566.487472] [<bf0dd228>] (wl12xx_op_start+0x0/0xb8 [wl12xx]) from [<bf0b96dc>] (ieee80211_open+0x2dc/0x720 [mac80211]) [ 566.500594] r7:00001002 r6:c4950800 r5:c440a220 r4:00000000 [ 566.508865] [<bf0b9400>] (ieee80211_open+0x0/0x720 [mac80211]) from [<c01f1edc>] (dev_open+0x9c/0xfc) [ 566.520705] [<c01f1e40>] (dev_open+0x0/0xfc) from [<c01f17dc>] (dev_change_flags+0x98/0x170) [ 566.531417] r5:00000041 r4:c4950800 [ 566.536330] [<c01f1744>] (dev_change_flags+0x0/0x170) from [<c023041c>] (devinet_ioctl+0x3a8/0x784) [ 566.547683] r7:c128e380 r6:00000001 r5:00008914 r4:00000000 [ 566.555587] [<c0230074>] (devinet_ioctl+0x0/0x784) from [<c02318cc>] (inet_ioctl+0xdc/0x114) [ 566.566299] [<c02317f0>] (inet_ioctl+0x0/0x114) from [<c01e1a60>] (sock_ioctl+0x1f0/0x248) [ 566.576827] r5:00008914 r4:c572c1a0 [ 566.581771] [<c01e1870>] (sock_ioctl+0x0/0x248) from [<c00b23a0>] (vfs_ioctl+0x34/0x94) [ 566.592086] r7:c572c1a0 r6:bee497e8 r5:00008914 r4:c572c1a0 [ 566.599990] [<c00b236c>] (vfs_ioctl+0x0/0x94) from [<c00b2a28>] (do_vfs_ioctl+0x52c/0x584) [ 566.610549] r7:c572c1a0 r6:00008914 r5:c572c1a0 r4:c3201228 [ 566.618453] [<c00b24fc>] (do_vfs_ioctl+0x0/0x584) from [<c00b2ac0>] (sys_ioctl+0x40/0x64) [ 566.628890] [<c00b2a80>] (sys_ioctl+0x0/0x64) from [<c0021da0>] (ret_fast_syscall+0x0/0x2c) [ 566.639541] r7:00000036 r6:00000000 r5:00000004 r4:001a11f3 [ 566.647445] ---[ end trace 15c26ef7dd5e7b03 ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 18:33:49 +08:00
static void wl1251_spi_enable_irq(struct wl1251 *wl)
{
return enable_irq(wl->irq);
}
static void wl1251_spi_disable_irq(struct wl1251 *wl)
{
return disable_irq(wl->irq);
}
static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
{
if (wl->set_power)
wl->set_power(enable);
return 0;
}
static const struct wl1251_if_operations wl1251_spi_ops = {
.read = wl1251_spi_read,
.write = wl1251_spi_write,
.reset = wl1251_spi_reset_wake,
wl1251: make irq handling interface specific In SDIO, the host driver requests the IRQ and invokes a callback to the card driver. This differs from SPI, so the relevant code needs to be interface-specific. This patch pushes the irq code down into _spi.c and _sdio.c, and adds enable/disable callbacks. This fixes the following warning: [ 566.343887] ------------[ cut here ]------------ [ 566.349105] WARNING: at kernel/irq/manage.c:222 __enable_irq+0x3c/0x6c() [ 566.356735] Unbalanced enable for IRQ 0 [ 566.361099] Modules linked in: msm_wifi wl12xx_sdio wl12xx mac80211 cfg80211 rfkill_backport lib80211_crypt_ccmp lib80211_crypt_wep lib80211_crypt_tkip lib80211 [ 566.381240] [<c025acec>] (dump_stack+0x0/0x14) from [<c004b610>] (warn_slowpath+0x70/0x8c) [ 566.391860] [<c004b5a0>] (warn_slowpath+0x0/0x8c) from [<c0077c10>] (__enable_irq+0x3c/0x6c) [ 566.402572] r3:00000000 r2:c02cad13 [ 566.407516] r7:00001002 r6:00000000 r5:c0310be4 r4:c0310be4 [ 566.415786] [<c0077bd4>] (__enable_irq+0x0/0x6c) from [<c0077fd0>] (enable_irq+0x38/0x64) [ 566.425826] r5:c0310be4 r4:a0000013 [ 566.430709] [<c0077f98>] (enable_irq+0x0/0x64) from [<bf0dfa78>] (wl12xx_boot_run_firmware+0xfc/0x170 [wl12xx]) [ 566.442947] r7:00001002 r6:c440a9fc r5:00000072 r4:c440a9e0 [ 566.450851] [<bf0df97c>] (wl12xx_boot_run_firmware+0x0/0x170 [wl12xx]) from [<bf0e05f0>] (wl1251_boot+0xd4/0x108 [wl12xx]) [ 566.464492] r5:00000000 r4:c440a9e0 [ 566.469466] [<bf0e051c>] (wl1251_boot+0x0/0x108 [wl12xx]) from [<bf0dd27c>] (wl12xx_op_start+0x54/0xb8 [wl12xx]) [ 566.482162] r5:00000000 r4:c440a9e0 [ 566.487472] [<bf0dd228>] (wl12xx_op_start+0x0/0xb8 [wl12xx]) from [<bf0b96dc>] (ieee80211_open+0x2dc/0x720 [mac80211]) [ 566.500594] r7:00001002 r6:c4950800 r5:c440a220 r4:00000000 [ 566.508865] [<bf0b9400>] (ieee80211_open+0x0/0x720 [mac80211]) from [<c01f1edc>] (dev_open+0x9c/0xfc) [ 566.520705] [<c01f1e40>] (dev_open+0x0/0xfc) from [<c01f17dc>] (dev_change_flags+0x98/0x170) [ 566.531417] r5:00000041 r4:c4950800 [ 566.536330] [<c01f1744>] (dev_change_flags+0x0/0x170) from [<c023041c>] (devinet_ioctl+0x3a8/0x784) [ 566.547683] r7:c128e380 r6:00000001 r5:00008914 r4:00000000 [ 566.555587] [<c0230074>] (devinet_ioctl+0x0/0x784) from [<c02318cc>] (inet_ioctl+0xdc/0x114) [ 566.566299] [<c02317f0>] (inet_ioctl+0x0/0x114) from [<c01e1a60>] (sock_ioctl+0x1f0/0x248) [ 566.576827] r5:00008914 r4:c572c1a0 [ 566.581771] [<c01e1870>] (sock_ioctl+0x0/0x248) from [<c00b23a0>] (vfs_ioctl+0x34/0x94) [ 566.592086] r7:c572c1a0 r6:bee497e8 r5:00008914 r4:c572c1a0 [ 566.599990] [<c00b236c>] (vfs_ioctl+0x0/0x94) from [<c00b2a28>] (do_vfs_ioctl+0x52c/0x584) [ 566.610549] r7:c572c1a0 r6:00008914 r5:c572c1a0 r4:c3201228 [ 566.618453] [<c00b24fc>] (do_vfs_ioctl+0x0/0x584) from [<c00b2ac0>] (sys_ioctl+0x40/0x64) [ 566.628890] [<c00b2a80>] (sys_ioctl+0x0/0x64) from [<c0021da0>] (ret_fast_syscall+0x0/0x2c) [ 566.639541] r7:00000036 r6:00000000 r5:00000004 r4:001a11f3 [ 566.647445] ---[ end trace 15c26ef7dd5e7b03 ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 18:33:49 +08:00
.enable_irq = wl1251_spi_enable_irq,
.disable_irq = wl1251_spi_disable_irq,
.power = wl1251_spi_set_power,
};
static int __devinit wl1251_spi_probe(struct spi_device *spi)
{
struct wl12xx_platform_data *pdata;
struct ieee80211_hw *hw;
struct wl1251 *wl;
int ret;
pdata = spi->dev.platform_data;
if (!pdata) {
wl1251_error("no platform data");
return -ENODEV;
}
hw = wl1251_alloc_hw();
if (IS_ERR(hw))
return PTR_ERR(hw);
wl = hw->priv;
SET_IEEE80211_DEV(hw, &spi->dev);
dev_set_drvdata(&spi->dev, wl);
wl->if_priv = spi;
wl->if_ops = &wl1251_spi_ops;
/* This is the only SPI value that we need to set here, the rest
* comes from the board-peripherals file */
spi->bits_per_word = 32;
ret = spi_setup(spi);
if (ret < 0) {
wl1251_error("spi_setup failed");
goto out_free;
}
wl->set_power = pdata->set_power;
if (!wl->set_power) {
wl1251_error("set power function missing in platform data");
return -ENODEV;
}
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1251_error("irq missing in platform data");
return -ENODEV;
}
wl->use_eeprom = pdata->use_eeprom;
ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
if (ret < 0) {
wl1251_error("request_irq() failed: %d", ret);
goto out_free;
}
irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
disable_irq(wl->irq);
ret = wl1251_init_ieee80211(wl);
if (ret)
goto out_irq;
return 0;
out_irq:
free_irq(wl->irq, wl);
out_free:
ieee80211_free_hw(hw);
return ret;
}
static int __devexit wl1251_spi_remove(struct spi_device *spi)
{
struct wl1251 *wl = dev_get_drvdata(&spi->dev);
wl1251: make irq handling interface specific In SDIO, the host driver requests the IRQ and invokes a callback to the card driver. This differs from SPI, so the relevant code needs to be interface-specific. This patch pushes the irq code down into _spi.c and _sdio.c, and adds enable/disable callbacks. This fixes the following warning: [ 566.343887] ------------[ cut here ]------------ [ 566.349105] WARNING: at kernel/irq/manage.c:222 __enable_irq+0x3c/0x6c() [ 566.356735] Unbalanced enable for IRQ 0 [ 566.361099] Modules linked in: msm_wifi wl12xx_sdio wl12xx mac80211 cfg80211 rfkill_backport lib80211_crypt_ccmp lib80211_crypt_wep lib80211_crypt_tkip lib80211 [ 566.381240] [<c025acec>] (dump_stack+0x0/0x14) from [<c004b610>] (warn_slowpath+0x70/0x8c) [ 566.391860] [<c004b5a0>] (warn_slowpath+0x0/0x8c) from [<c0077c10>] (__enable_irq+0x3c/0x6c) [ 566.402572] r3:00000000 r2:c02cad13 [ 566.407516] r7:00001002 r6:00000000 r5:c0310be4 r4:c0310be4 [ 566.415786] [<c0077bd4>] (__enable_irq+0x0/0x6c) from [<c0077fd0>] (enable_irq+0x38/0x64) [ 566.425826] r5:c0310be4 r4:a0000013 [ 566.430709] [<c0077f98>] (enable_irq+0x0/0x64) from [<bf0dfa78>] (wl12xx_boot_run_firmware+0xfc/0x170 [wl12xx]) [ 566.442947] r7:00001002 r6:c440a9fc r5:00000072 r4:c440a9e0 [ 566.450851] [<bf0df97c>] (wl12xx_boot_run_firmware+0x0/0x170 [wl12xx]) from [<bf0e05f0>] (wl1251_boot+0xd4/0x108 [wl12xx]) [ 566.464492] r5:00000000 r4:c440a9e0 [ 566.469466] [<bf0e051c>] (wl1251_boot+0x0/0x108 [wl12xx]) from [<bf0dd27c>] (wl12xx_op_start+0x54/0xb8 [wl12xx]) [ 566.482162] r5:00000000 r4:c440a9e0 [ 566.487472] [<bf0dd228>] (wl12xx_op_start+0x0/0xb8 [wl12xx]) from [<bf0b96dc>] (ieee80211_open+0x2dc/0x720 [mac80211]) [ 566.500594] r7:00001002 r6:c4950800 r5:c440a220 r4:00000000 [ 566.508865] [<bf0b9400>] (ieee80211_open+0x0/0x720 [mac80211]) from [<c01f1edc>] (dev_open+0x9c/0xfc) [ 566.520705] [<c01f1e40>] (dev_open+0x0/0xfc) from [<c01f17dc>] (dev_change_flags+0x98/0x170) [ 566.531417] r5:00000041 r4:c4950800 [ 566.536330] [<c01f1744>] (dev_change_flags+0x0/0x170) from [<c023041c>] (devinet_ioctl+0x3a8/0x784) [ 566.547683] r7:c128e380 r6:00000001 r5:00008914 r4:00000000 [ 566.555587] [<c0230074>] (devinet_ioctl+0x0/0x784) from [<c02318cc>] (inet_ioctl+0xdc/0x114) [ 566.566299] [<c02317f0>] (inet_ioctl+0x0/0x114) from [<c01e1a60>] (sock_ioctl+0x1f0/0x248) [ 566.576827] r5:00008914 r4:c572c1a0 [ 566.581771] [<c01e1870>] (sock_ioctl+0x0/0x248) from [<c00b23a0>] (vfs_ioctl+0x34/0x94) [ 566.592086] r7:c572c1a0 r6:bee497e8 r5:00008914 r4:c572c1a0 [ 566.599990] [<c00b236c>] (vfs_ioctl+0x0/0x94) from [<c00b2a28>] (do_vfs_ioctl+0x52c/0x584) [ 566.610549] r7:c572c1a0 r6:00008914 r5:c572c1a0 r4:c3201228 [ 566.618453] [<c00b24fc>] (do_vfs_ioctl+0x0/0x584) from [<c00b2ac0>] (sys_ioctl+0x40/0x64) [ 566.628890] [<c00b2a80>] (sys_ioctl+0x0/0x64) from [<c0021da0>] (ret_fast_syscall+0x0/0x2c) [ 566.639541] r7:00000036 r6:00000000 r5:00000004 r4:001a11f3 [ 566.647445] ---[ end trace 15c26ef7dd5e7b03 ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 18:33:49 +08:00
free_irq(wl->irq, wl);
wl1251_free_hw(wl);
return 0;
}
static struct spi_driver wl1251_spi_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
.probe = wl1251_spi_probe,
.remove = __devexit_p(wl1251_spi_remove),
};
static int __init wl1251_spi_init(void)
{
int ret;
ret = spi_register_driver(&wl1251_spi_driver);
if (ret < 0) {
wl1251_error("failed to register spi driver: %d", ret);
goto out;
}
out:
return ret;
}
static void __exit wl1251_spi_exit(void)
{
spi_unregister_driver(&wl1251_spi_driver);
wl1251_notice("unloaded");
}
module_init(wl1251_spi_init);
module_exit(wl1251_spi_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
MODULE_ALIAS("spi:wl1251");