OpenCloudOS-Kernel/drivers/net/wireless/ath/ath10k/debug.c

2684 lines
64 KiB
C
Raw Normal View History

/*
* Copyright (c) 2005-2011 Atheros Communications Inc.
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
ath10k: fix kernel panic issue during pci probe If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-30 20:06:08 +08:00
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/vmalloc.h>
#include <linux/crc32.h>
#include <linux/firmware.h>
#include "core.h"
#include "debug.h"
#include "hif.h"
#include "wmi-ops.h"
/* ms */
#define ATH10K_DEBUG_HTT_STATS_INTERVAL 1000
#define ATH10K_DEBUG_CAL_DATA_LEN 12064
void ath10k_info(struct ath10k *ar, const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
va_start(args, fmt);
vaf.va = &args;
dev_info(ar->dev, "%pV", &vaf);
trace_ath10k_log_info(ar, &vaf);
va_end(args);
}
EXPORT_SYMBOL(ath10k_info);
void ath10k_debug_print_hwfw_info(struct ath10k *ar)
{
const struct firmware *firmware;
char fw_features[128] = {};
u32 crc = 0;
ath10k_core_get_fw_features_str(ar, fw_features, sizeof(fw_features));
ath10k_info(ar, "%s target 0x%08x chip_id 0x%08x sub %04x:%04x",
ar->hw_params.name,
ar->target_version,
ar->chip_id,
ar->id.subsystem_vendor, ar->id.subsystem_device);
ath10k_info(ar, "kconfig debug %d debugfs %d tracing %d dfs %d testmode %d\n",
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:45:50 +08:00
IS_ENABLED(CONFIG_ATH10K_DEBUG),
IS_ENABLED(CONFIG_ATH10K_DEBUGFS),
IS_ENABLED(CONFIG_ATH10K_TRACING),
IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED),
IS_ENABLED(CONFIG_NL80211_TESTMODE));
firmware = ar->normal_mode_fw.fw_file.firmware;
if (firmware)
crc = crc32_le(0, firmware->data, firmware->size);
ath10k_info(ar, "firmware ver %s api %d features %s crc32 %08x\n",
ar->hw->wiphy->fw_version,
ar->fw_api,
fw_features,
crc);
}
void ath10k_debug_print_board_info(struct ath10k *ar)
{
char boardinfo[100];
ath10k: fix kernel panic issue during pci probe If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-30 20:06:08 +08:00
const struct firmware *board;
u32 crc;
if (ar->id.bmi_ids_valid)
scnprintf(boardinfo, sizeof(boardinfo), "%d:%d",
ar->id.bmi_chip_id, ar->id.bmi_board_id);
else
scnprintf(boardinfo, sizeof(boardinfo), "N/A");
ath10k: fix kernel panic issue during pci probe If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-30 20:06:08 +08:00
board = ar->normal_mode_fw.board;
if (!IS_ERR_OR_NULL(board))
crc = crc32_le(0, board->data, board->size);
else
crc = 0;
ath10k_info(ar, "board_file api %d bmi_id %s crc32 %08x",
ar->bd_api,
boardinfo,
ath10k: fix kernel panic issue during pci probe If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-30 20:06:08 +08:00
crc);
}
void ath10k_debug_print_boot_info(struct ath10k *ar)
{
ath10k_info(ar, "htt-ver %d.%d wmi-op %d htt-op %d cal %s max-sta %d raw %d hwcrypto %d\n",
ar->htt.target_version_major,
ar->htt.target_version_minor,
ar->normal_mode_fw.fw_file.wmi_op_version,
ar->normal_mode_fw.fw_file.htt_op_version,
ath10k_cal_mode_str(ar->cal_mode),
ar->max_num_stations,
ath10k: enable raw encap mode and software crypto engine This patch enables raw Rx/Tx encap mode to support software based crypto engine. This patch introduces a new module param 'cryptmode'. cryptmode: 0: Use hardware crypto engine globally with native Wi-Fi mode TX/RX encapsulation to the firmware. This is the default mode. 1: Use sofware crypto engine globally with raw mode TX/RX encapsulation to the firmware. Known limitation: A-MSDU must be disabled for RAW Tx encap mode to perform well when heavy traffic is applied. Testing: (by Michal Kazior <michal.kazior@tieto.com>) a) Performance Testing cryptmode=1 ap=qca988x sta=killer1525 killer1525 -> qca988x 194.496 mbps [tcp1 ip4] killer1525 -> qca988x 238.309 mbps [tcp5 ip4] killer1525 -> qca988x 266.958 mbps [udp1 ip4] killer1525 -> qca988x 477.468 mbps [udp5 ip4] qca988x -> killer1525 301.378 mbps [tcp1 ip4] qca988x -> killer1525 297.949 mbps [tcp5 ip4] qca988x -> killer1525 331.351 mbps [udp1 ip4] qca988x -> killer1525 371.528 mbps [udp5 ip4] ap=killer1525 sta=qca988x qca988x -> killer1525 331.447 mbps [tcp1 ip4] qca988x -> killer1525 328.783 mbps [tcp5 ip4] qca988x -> killer1525 375.309 mbps [udp1 ip4] qca988x -> killer1525 403.379 mbps [udp5 ip4] killer1525 -> qca988x 203.689 mbps [tcp1 ip4] killer1525 -> qca988x 222.339 mbps [tcp5 ip4] killer1525 -> qca988x 264.199 mbps [udp1 ip4] killer1525 -> qca988x 479.371 mbps [udp5 ip4] Note: - only open network tested for RAW vs nwifi performance comparison - killer1525 (qca6174 hw2.2) is 2x2 device (hence max 866mbps) - used iperf - OTA, devices a few cm apart from each other, no shielding - tcpX/udpX, X - means number of threads used Overview: - relative Tx performance drop is seen but is within reasonable and expected threshold (A-MSDU must be disabled with RAW Tx) b) Connectivity Testing cryptmode=1 ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br1vlan OK Note: - each test takes all possible endpoint pairs and pings - each pair-ping flushes arp table - ip6 is used c) Testbed Topology: 1ap1sta: [ap] ---- [sta] endpoints: ap, sta 1ap1sta2br: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] endpoints: veth0, veth2, br0, br1 note: STA works in 4addr mode, AP has wds_sta=1 1ap1sta2br1vlan: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] | | [vlan0_id2] [vlan1_id2] endpoints: vlan0_id2, vlan1_id2 note: STA works in 4addr mode, AP has wds_sta=1 Credits: Thanks to Michal Kazior <michal.kazior@tieto.com> who helped find the amsdu issue, contributed a workaround (already squashed into this patch), and contributed the throughput and connectivity tests results. Signed-off-by: David Liu <cfliu.tw@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Tested-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-25 01:25:32 +08:00
test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags),
!test_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags));
}
void ath10k_print_driver_info(struct ath10k *ar)
{
ath10k_debug_print_hwfw_info(ar);
ath10k_debug_print_board_info(ar);
ath10k_debug_print_boot_info(ar);
}
EXPORT_SYMBOL(ath10k_print_driver_info);
void ath10k_err(struct ath10k *ar, const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
va_start(args, fmt);
vaf.va = &args;
dev_err(ar->dev, "%pV", &vaf);
trace_ath10k_log_err(ar, &vaf);
va_end(args);
}
EXPORT_SYMBOL(ath10k_err);
void ath10k_warn(struct ath10k *ar, const char *fmt, ...)
{
struct va_format vaf = {
.fmt = fmt,
};
va_list args;
va_start(args, fmt);
vaf.va = &args;
dev_warn_ratelimited(ar->dev, "%pV", &vaf);
trace_ath10k_log_warn(ar, &vaf);
va_end(args);
}
EXPORT_SYMBOL(ath10k_warn);
#ifdef CONFIG_ATH10K_DEBUGFS
static ssize_t ath10k_read_wmi_services(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
char *buf;
size_t len = 0, buf_len = 8192;
const char *name;
ssize_t ret_cnt;
bool enabled;
int i;
buf = kzalloc(buf_len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
mutex_lock(&ar->conf_mutex);
spin_lock_bh(&ar->data_lock);
for (i = 0; i < WMI_SERVICE_MAX; i++) {
enabled = test_bit(i, ar->wmi.svc_map);
name = wmi_service_name(i);
if (!name) {
if (enabled)
len += scnprintf(buf + len, buf_len - len,
"%-40s %s (bit %d)\n",
"unknown", "enabled", i);
continue;
}
len += scnprintf(buf + len, buf_len - len,
"%-40s %s\n",
name, enabled ? "enabled" : "-");
}
spin_unlock_bh(&ar->data_lock);
ret_cnt = simple_read_from_buffer(user_buf, count, ppos, buf, len);
mutex_unlock(&ar->conf_mutex);
kfree(buf);
return ret_cnt;
}
static const struct file_operations fops_wmi_services = {
.read = ath10k_read_wmi_services,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static void ath10k_fw_stats_pdevs_free(struct list_head *head)
{
struct ath10k_fw_stats_pdev *i, *tmp;
list_for_each_entry_safe(i, tmp, head, list) {
list_del(&i->list);
kfree(i);
}
}
static void ath10k_fw_stats_vdevs_free(struct list_head *head)
{
struct ath10k_fw_stats_vdev *i, *tmp;
list_for_each_entry_safe(i, tmp, head, list) {
list_del(&i->list);
kfree(i);
}
}
static void ath10k_fw_stats_peers_free(struct list_head *head)
{
struct ath10k_fw_stats_peer *i, *tmp;
list_for_each_entry_safe(i, tmp, head, list) {
list_del(&i->list);
kfree(i);
}
}
static void ath10k_fw_extd_stats_peers_free(struct list_head *head)
{
struct ath10k_fw_extd_stats_peer *i, *tmp;
list_for_each_entry_safe(i, tmp, head, list) {
list_del(&i->list);
kfree(i);
}
}
static void ath10k_debug_fw_stats_reset(struct ath10k *ar)
{
spin_lock_bh(&ar->data_lock);
ar->debug.fw_stats_done = false;
ar->debug.fw_stats.extended = false;
ath10k_fw_stats_pdevs_free(&ar->debug.fw_stats.pdevs);
ath10k_fw_stats_vdevs_free(&ar->debug.fw_stats.vdevs);
ath10k_fw_stats_peers_free(&ar->debug.fw_stats.peers);
ath10k_fw_extd_stats_peers_free(&ar->debug.fw_stats.peers_extd);
spin_unlock_bh(&ar->data_lock);
}
void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
{
struct ath10k_fw_stats stats = {};
bool is_start, is_started, is_end;
size_t num_peers;
size_t num_vdevs;
int ret;
INIT_LIST_HEAD(&stats.pdevs);
INIT_LIST_HEAD(&stats.vdevs);
INIT_LIST_HEAD(&stats.peers);
INIT_LIST_HEAD(&stats.peers_extd);
spin_lock_bh(&ar->data_lock);
ret = ath10k_wmi_pull_fw_stats(ar, skb, &stats);
if (ret) {
ath10k_warn(ar, "failed to pull fw stats: %d\n", ret);
goto free;
}
/* Stat data may exceed htc-wmi buffer limit. In such case firmware
* splits the stats data and delivers it in a ping-pong fashion of
* request cmd-update event.
*
* However there is no explicit end-of-data. Instead start-of-data is
* used as an implicit one. This works as follows:
* a) discard stat update events until one with pdev stats is
* delivered - this skips session started at end of (b)
* b) consume stat update events until another one with pdev stats is
* delivered which is treated as end-of-data and is itself discarded
*/
if (ath10k_peer_stats_enabled(ar))
ath10k_sta_update_rx_duration(ar, &stats);
if (ar->debug.fw_stats_done) {
if (!ath10k_peer_stats_enabled(ar))
ath10k_warn(ar, "received unsolicited stats update event\n");
goto free;
}
num_peers = ath10k_wmi_fw_stats_num_peers(&ar->debug.fw_stats.peers);
num_vdevs = ath10k_wmi_fw_stats_num_vdevs(&ar->debug.fw_stats.vdevs);
is_start = (list_empty(&ar->debug.fw_stats.pdevs) &&
!list_empty(&stats.pdevs));
is_end = (!list_empty(&ar->debug.fw_stats.pdevs) &&
!list_empty(&stats.pdevs));
if (is_start)
list_splice_tail_init(&stats.pdevs, &ar->debug.fw_stats.pdevs);
if (is_end)
ar->debug.fw_stats_done = true;
is_started = !list_empty(&ar->debug.fw_stats.pdevs);
if (is_started && !is_end) {
if (num_peers >= ATH10K_MAX_NUM_PEER_IDS) {
/* Although this is unlikely impose a sane limit to
* prevent firmware from DoS-ing the host.
*/
ath10k_fw_stats_peers_free(&ar->debug.fw_stats.peers);
ath10k_fw_extd_stats_peers_free(&ar->debug.fw_stats.peers_extd);
ath10k_warn(ar, "dropping fw peer stats\n");
goto free;
}
if (num_vdevs >= BITS_PER_LONG) {
ath10k_fw_stats_vdevs_free(&ar->debug.fw_stats.vdevs);
ath10k_warn(ar, "dropping fw vdev stats\n");
goto free;
}
if (!list_empty(&stats.peers))
list_splice_tail_init(&stats.peers_extd,
&ar->debug.fw_stats.peers_extd);
list_splice_tail_init(&stats.peers, &ar->debug.fw_stats.peers);
list_splice_tail_init(&stats.vdevs, &ar->debug.fw_stats.vdevs);
}
complete(&ar->debug.fw_stats_complete);
free:
/* In some cases lists have been spliced and cleared. Free up
* resources if that is not the case.
*/
ath10k_fw_stats_pdevs_free(&stats.pdevs);
ath10k_fw_stats_vdevs_free(&stats.vdevs);
ath10k_fw_stats_peers_free(&stats.peers);
ath10k_fw_extd_stats_peers_free(&stats.peers_extd);
spin_unlock_bh(&ar->data_lock);
}
static int ath10k_debug_fw_stats_request(struct ath10k *ar)
{
unsigned long timeout, time_left;
int ret;
lockdep_assert_held(&ar->conf_mutex);
timeout = jiffies + msecs_to_jiffies(1 * HZ);
ath10k_debug_fw_stats_reset(ar);
for (;;) {
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
reinit_completion(&ar->debug.fw_stats_complete);
ret = ath10k_wmi_request_stats(ar, ar->fw_stats_req_mask);
if (ret) {
ath10k_warn(ar, "could not request stats (%d)\n", ret);
return ret;
}
time_left =
wait_for_completion_timeout(&ar->debug.fw_stats_complete,
1 * HZ);
if (!time_left)
return -ETIMEDOUT;
spin_lock_bh(&ar->data_lock);
if (ar->debug.fw_stats_done) {
spin_unlock_bh(&ar->data_lock);
break;
}
spin_unlock_bh(&ar->data_lock);
}
return 0;
}
static int ath10k_fw_stats_open(struct inode *inode, struct file *file)
{
struct ath10k *ar = inode->i_private;
void *buf = NULL;
int ret;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON) {
ret = -ENETDOWN;
goto err_unlock;
}
buf = vmalloc(ATH10K_FW_STATS_BUF_SIZE);
if (!buf) {
ret = -ENOMEM;
goto err_unlock;
}
ret = ath10k_debug_fw_stats_request(ar);
if (ret) {
ath10k_warn(ar, "failed to request fw stats: %d\n", ret);
goto err_free;
}
ret = ath10k_wmi_fw_stats_fill(ar, &ar->debug.fw_stats, buf);
if (ret) {
ath10k_warn(ar, "failed to fill fw stats: %d\n", ret);
goto err_free;
}
file->private_data = buf;
mutex_unlock(&ar->conf_mutex);
return 0;
err_free:
vfree(buf);
err_unlock:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static int ath10k_fw_stats_release(struct inode *inode, struct file *file)
{
vfree(file->private_data);
return 0;
}
static ssize_t ath10k_fw_stats_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
const char *buf = file->private_data;
size_t len = strlen(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static const struct file_operations fops_fw_stats = {
.open = ath10k_fw_stats_open,
.release = ath10k_fw_stats_release,
.read = ath10k_fw_stats_read,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_debug_fw_reset_stats_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
int ret;
size_t len = 0, buf_len = 500;
char *buf;
buf = kmalloc(buf_len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
spin_lock_bh(&ar->data_lock);
len += scnprintf(buf + len, buf_len - len,
"fw_crash_counter\t\t%d\n", ar->stats.fw_crash_counter);
len += scnprintf(buf + len, buf_len - len,
"fw_warm_reset_counter\t\t%d\n",
ar->stats.fw_warm_reset_counter);
len += scnprintf(buf + len, buf_len - len,
"fw_cold_reset_counter\t\t%d\n",
ar->stats.fw_cold_reset_counter);
spin_unlock_bh(&ar->data_lock);
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
}
static const struct file_operations fops_fw_reset_stats = {
.open = simple_open,
.read = ath10k_debug_fw_reset_stats_read,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
/* This is a clean assert crash in firmware. */
static int ath10k_debug_fw_assert(struct ath10k *ar)
{
struct wmi_vdev_install_key_cmd *cmd;
struct sk_buff *skb;
skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd) + 16);
if (!skb)
return -ENOMEM;
cmd = (struct wmi_vdev_install_key_cmd *)skb->data;
memset(cmd, 0, sizeof(*cmd));
/* big enough number so that firmware asserts */
cmd->vdev_id = __cpu_to_le32(0x7ffe);
return ath10k_wmi_cmd_send(ar, skb,
ar->wmi.cmd->vdev_install_key_cmdid);
}
static ssize_t ath10k_read_simulate_fw_crash(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
const char buf[] =
"To simulate firmware crash write one of the keywords to this file:\n"
"`soft` - this will send WMI_FORCE_FW_HANG_ASSERT to firmware if FW supports that command.\n"
"`hard` - this will send to firmware command with illegal parameters causing firmware crash.\n"
"`assert` - this will send special illegal parameter to firmware to cause assert failure and crash.\n"
"`hw-restart` - this will simply queue hw restart without fw/hw actually crashing.\n";
return simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
}
/* Simulate firmware crash:
* 'soft': Call wmi command causing firmware hang. This firmware hang is
* recoverable by warm firmware reset.
* 'hard': Force firmware crash by setting any vdev parameter for not allowed
* vdev id. This is hard firmware crash because it is recoverable only by cold
* firmware reset.
*/
static ssize_t ath10k_write_simulate_fw_crash(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
char buf[32] = {0};
ssize_t rc;
int ret;
/* filter partial writes and invalid commands */
if (*ppos != 0 || count >= sizeof(buf) || count == 0)
return -EINVAL;
rc = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
if (rc < 0)
return rc;
/* drop the possible '\n' from the end */
if (buf[*ppos - 1] == '\n')
buf[*ppos - 1] = '\0';
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON &&
ar->state != ATH10K_STATE_RESTARTED) {
ret = -ENETDOWN;
goto exit;
}
if (!strcmp(buf, "soft")) {
ath10k_info(ar, "simulating soft firmware crash\n");
ret = ath10k_wmi_force_fw_hang(ar, WMI_FORCE_FW_HANG_ASSERT, 0);
} else if (!strcmp(buf, "hard")) {
ath10k_info(ar, "simulating hard firmware crash\n");
/* 0x7fff is vdev id, and it is always out of range for all
* firmware variants in order to force a firmware crash.
*/
ret = ath10k_wmi_vdev_set_param(ar, 0x7fff,
ar->wmi.vdev_param->rts_threshold,
0);
} else if (!strcmp(buf, "assert")) {
ath10k_info(ar, "simulating firmware assert crash\n");
ret = ath10k_debug_fw_assert(ar);
} else if (!strcmp(buf, "hw-restart")) {
ath10k_info(ar, "user requested hw restart\n");
queue_work(ar->workqueue, &ar->restart_work);
ret = 0;
} else {
ret = -EINVAL;
goto exit;
}
if (ret) {
ath10k_warn(ar, "failed to simulate firmware crash: %d\n", ret);
goto exit;
}
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static const struct file_operations fops_simulate_fw_crash = {
.read = ath10k_read_simulate_fw_crash,
.write = ath10k_write_simulate_fw_crash,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_read_chip_id(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
size_t len;
char buf[50];
len = scnprintf(buf, sizeof(buf), "0x%08x\n", ar->chip_id);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static const struct file_operations fops_chip_id = {
.read = ath10k_read_chip_id,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_reg_addr_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u8 buf[32];
size_t len = 0;
u32 reg_addr;
mutex_lock(&ar->conf_mutex);
reg_addr = ar->debug.reg_addr;
mutex_unlock(&ar->conf_mutex);
len += scnprintf(buf + len, sizeof(buf) - len, "0x%x\n", reg_addr);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t ath10k_reg_addr_write(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u32 reg_addr;
int ret;
ret = kstrtou32_from_user(user_buf, count, 0, &reg_addr);
if (ret)
return ret;
if (!IS_ALIGNED(reg_addr, 4))
return -EFAULT;
mutex_lock(&ar->conf_mutex);
ar->debug.reg_addr = reg_addr;
mutex_unlock(&ar->conf_mutex);
return count;
}
static const struct file_operations fops_reg_addr = {
.read = ath10k_reg_addr_read,
.write = ath10k_reg_addr_write,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_reg_value_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u8 buf[48];
size_t len;
u32 reg_addr, reg_val;
int ret;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON &&
ar->state != ATH10K_STATE_UTF) {
ret = -ENETDOWN;
goto exit;
}
reg_addr = ar->debug.reg_addr;
reg_val = ath10k_hif_read32(ar, reg_addr);
len = scnprintf(buf, sizeof(buf), "0x%08x:0x%08x\n", reg_addr, reg_val);
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static ssize_t ath10k_reg_value_write(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u32 reg_addr, reg_val;
int ret;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON &&
ar->state != ATH10K_STATE_UTF) {
ret = -ENETDOWN;
goto exit;
}
reg_addr = ar->debug.reg_addr;
ret = kstrtou32_from_user(user_buf, count, 0, &reg_val);
if (ret)
goto exit;
ath10k_hif_write32(ar, reg_addr, reg_val);
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static const struct file_operations fops_reg_value = {
.read = ath10k_reg_value_read,
.write = ath10k_reg_value_write,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_mem_value_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u8 *buf;
int ret;
if (*ppos < 0)
return -EINVAL;
if (!count)
return 0;
mutex_lock(&ar->conf_mutex);
buf = vmalloc(count);
if (!buf) {
ret = -ENOMEM;
goto exit;
}
if (ar->state != ATH10K_STATE_ON &&
ar->state != ATH10K_STATE_UTF) {
ret = -ENETDOWN;
goto exit;
}
ret = ath10k_hif_diag_read(ar, *ppos, buf, count);
if (ret) {
ath10k_warn(ar, "failed to read address 0x%08x via diagnose window fnrom debugfs: %d\n",
(u32)(*ppos), ret);
goto exit;
}
ret = copy_to_user(user_buf, buf, count);
if (ret) {
ret = -EFAULT;
goto exit;
}
count -= ret;
*ppos += count;
ret = count;
exit:
vfree(buf);
mutex_unlock(&ar->conf_mutex);
return ret;
}
static ssize_t ath10k_mem_value_write(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u8 *buf;
int ret;
if (*ppos < 0)
return -EINVAL;
if (!count)
return 0;
mutex_lock(&ar->conf_mutex);
buf = vmalloc(count);
if (!buf) {
ret = -ENOMEM;
goto exit;
}
if (ar->state != ATH10K_STATE_ON &&
ar->state != ATH10K_STATE_UTF) {
ret = -ENETDOWN;
goto exit;
}
ret = copy_from_user(buf, user_buf, count);
if (ret) {
ret = -EFAULT;
goto exit;
}
ret = ath10k_hif_diag_write(ar, *ppos, buf, count);
if (ret) {
ath10k_warn(ar, "failed to write address 0x%08x via diagnose window from debugfs: %d\n",
(u32)(*ppos), ret);
goto exit;
}
*ppos += count;
ret = count;
exit:
vfree(buf);
mutex_unlock(&ar->conf_mutex);
return ret;
}
static const struct file_operations fops_mem_value = {
.read = ath10k_mem_value_read,
.write = ath10k_mem_value_write,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static int ath10k_debug_htt_stats_req(struct ath10k *ar)
{
u64 cookie;
int ret;
lockdep_assert_held(&ar->conf_mutex);
if (ar->debug.htt_stats_mask == 0)
/* htt stats are disabled */
return 0;
if (ar->state != ATH10K_STATE_ON)
return 0;
cookie = get_jiffies_64();
ret = ath10k_htt_h2t_stats_req(&ar->htt, ar->debug.htt_stats_mask,
cookie);
if (ret) {
ath10k_warn(ar, "failed to send htt stats request: %d\n", ret);
return ret;
}
queue_delayed_work(ar->workqueue, &ar->debug.htt_stats_dwork,
msecs_to_jiffies(ATH10K_DEBUG_HTT_STATS_INTERVAL));
return 0;
}
static void ath10k_debug_htt_stats_dwork(struct work_struct *work)
{
struct ath10k *ar = container_of(work, struct ath10k,
debug.htt_stats_dwork.work);
mutex_lock(&ar->conf_mutex);
ath10k_debug_htt_stats_req(ar);
mutex_unlock(&ar->conf_mutex);
}
static ssize_t ath10k_read_htt_stats_mask(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
char buf[32];
size_t len;
len = scnprintf(buf, sizeof(buf), "%lu\n", ar->debug.htt_stats_mask);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t ath10k_write_htt_stats_mask(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
unsigned long mask;
int ret;
ret = kstrtoul_from_user(user_buf, count, 0, &mask);
if (ret)
return ret;
/* max 8 bit masks (for now) */
if (mask > 0xff)
return -E2BIG;
mutex_lock(&ar->conf_mutex);
ar->debug.htt_stats_mask = mask;
ret = ath10k_debug_htt_stats_req(ar);
if (ret)
goto out;
ret = count;
out:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static const struct file_operations fops_htt_stats_mask = {
.read = ath10k_read_htt_stats_mask,
.write = ath10k_write_htt_stats_mask,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_read_htt_max_amsdu_ampdu(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
char buf[64];
u8 amsdu, ampdu;
size_t len;
mutex_lock(&ar->conf_mutex);
ath10k: enable raw encap mode and software crypto engine This patch enables raw Rx/Tx encap mode to support software based crypto engine. This patch introduces a new module param 'cryptmode'. cryptmode: 0: Use hardware crypto engine globally with native Wi-Fi mode TX/RX encapsulation to the firmware. This is the default mode. 1: Use sofware crypto engine globally with raw mode TX/RX encapsulation to the firmware. Known limitation: A-MSDU must be disabled for RAW Tx encap mode to perform well when heavy traffic is applied. Testing: (by Michal Kazior <michal.kazior@tieto.com>) a) Performance Testing cryptmode=1 ap=qca988x sta=killer1525 killer1525 -> qca988x 194.496 mbps [tcp1 ip4] killer1525 -> qca988x 238.309 mbps [tcp5 ip4] killer1525 -> qca988x 266.958 mbps [udp1 ip4] killer1525 -> qca988x 477.468 mbps [udp5 ip4] qca988x -> killer1525 301.378 mbps [tcp1 ip4] qca988x -> killer1525 297.949 mbps [tcp5 ip4] qca988x -> killer1525 331.351 mbps [udp1 ip4] qca988x -> killer1525 371.528 mbps [udp5 ip4] ap=killer1525 sta=qca988x qca988x -> killer1525 331.447 mbps [tcp1 ip4] qca988x -> killer1525 328.783 mbps [tcp5 ip4] qca988x -> killer1525 375.309 mbps [udp1 ip4] qca988x -> killer1525 403.379 mbps [udp5 ip4] killer1525 -> qca988x 203.689 mbps [tcp1 ip4] killer1525 -> qca988x 222.339 mbps [tcp5 ip4] killer1525 -> qca988x 264.199 mbps [udp1 ip4] killer1525 -> qca988x 479.371 mbps [udp5 ip4] Note: - only open network tested for RAW vs nwifi performance comparison - killer1525 (qca6174 hw2.2) is 2x2 device (hence max 866mbps) - used iperf - OTA, devices a few cm apart from each other, no shielding - tcpX/udpX, X - means number of threads used Overview: - relative Tx performance drop is seen but is within reasonable and expected threshold (A-MSDU must be disabled with RAW Tx) b) Connectivity Testing cryptmode=1 ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br1vlan OK Note: - each test takes all possible endpoint pairs and pings - each pair-ping flushes arp table - ip6 is used c) Testbed Topology: 1ap1sta: [ap] ---- [sta] endpoints: ap, sta 1ap1sta2br: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] endpoints: veth0, veth2, br0, br1 note: STA works in 4addr mode, AP has wds_sta=1 1ap1sta2br1vlan: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] | | [vlan0_id2] [vlan1_id2] endpoints: vlan0_id2, vlan1_id2 note: STA works in 4addr mode, AP has wds_sta=1 Credits: Thanks to Michal Kazior <michal.kazior@tieto.com> who helped find the amsdu issue, contributed a workaround (already squashed into this patch), and contributed the throughput and connectivity tests results. Signed-off-by: David Liu <cfliu.tw@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Tested-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-25 01:25:32 +08:00
amsdu = ar->htt.max_num_amsdu;
ampdu = ar->htt.max_num_ampdu;
mutex_unlock(&ar->conf_mutex);
len = scnprintf(buf, sizeof(buf), "%u %u\n", amsdu, ampdu);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t ath10k_write_htt_max_amsdu_ampdu(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
int res;
char buf[64] = {0};
unsigned int amsdu, ampdu;
res = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos,
user_buf, count);
if (res <= 0)
return res;
res = sscanf(buf, "%u %u", &amsdu, &ampdu);
if (res != 2)
return -EINVAL;
mutex_lock(&ar->conf_mutex);
res = ath10k_htt_h2t_aggr_cfg_msg(&ar->htt, ampdu, amsdu);
if (res)
goto out;
res = count;
ath10k: enable raw encap mode and software crypto engine This patch enables raw Rx/Tx encap mode to support software based crypto engine. This patch introduces a new module param 'cryptmode'. cryptmode: 0: Use hardware crypto engine globally with native Wi-Fi mode TX/RX encapsulation to the firmware. This is the default mode. 1: Use sofware crypto engine globally with raw mode TX/RX encapsulation to the firmware. Known limitation: A-MSDU must be disabled for RAW Tx encap mode to perform well when heavy traffic is applied. Testing: (by Michal Kazior <michal.kazior@tieto.com>) a) Performance Testing cryptmode=1 ap=qca988x sta=killer1525 killer1525 -> qca988x 194.496 mbps [tcp1 ip4] killer1525 -> qca988x 238.309 mbps [tcp5 ip4] killer1525 -> qca988x 266.958 mbps [udp1 ip4] killer1525 -> qca988x 477.468 mbps [udp5 ip4] qca988x -> killer1525 301.378 mbps [tcp1 ip4] qca988x -> killer1525 297.949 mbps [tcp5 ip4] qca988x -> killer1525 331.351 mbps [udp1 ip4] qca988x -> killer1525 371.528 mbps [udp5 ip4] ap=killer1525 sta=qca988x qca988x -> killer1525 331.447 mbps [tcp1 ip4] qca988x -> killer1525 328.783 mbps [tcp5 ip4] qca988x -> killer1525 375.309 mbps [udp1 ip4] qca988x -> killer1525 403.379 mbps [udp5 ip4] killer1525 -> qca988x 203.689 mbps [tcp1 ip4] killer1525 -> qca988x 222.339 mbps [tcp5 ip4] killer1525 -> qca988x 264.199 mbps [udp1 ip4] killer1525 -> qca988x 479.371 mbps [udp5 ip4] Note: - only open network tested for RAW vs nwifi performance comparison - killer1525 (qca6174 hw2.2) is 2x2 device (hence max 866mbps) - used iperf - OTA, devices a few cm apart from each other, no shielding - tcpX/udpX, X - means number of threads used Overview: - relative Tx performance drop is seen but is within reasonable and expected threshold (A-MSDU must be disabled with RAW Tx) b) Connectivity Testing cryptmode=1 ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br1vlan OK Note: - each test takes all possible endpoint pairs and pings - each pair-ping flushes arp table - ip6 is used c) Testbed Topology: 1ap1sta: [ap] ---- [sta] endpoints: ap, sta 1ap1sta2br: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] endpoints: veth0, veth2, br0, br1 note: STA works in 4addr mode, AP has wds_sta=1 1ap1sta2br1vlan: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] | | [vlan0_id2] [vlan1_id2] endpoints: vlan0_id2, vlan1_id2 note: STA works in 4addr mode, AP has wds_sta=1 Credits: Thanks to Michal Kazior <michal.kazior@tieto.com> who helped find the amsdu issue, contributed a workaround (already squashed into this patch), and contributed the throughput and connectivity tests results. Signed-off-by: David Liu <cfliu.tw@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Tested-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-25 01:25:32 +08:00
ar->htt.max_num_amsdu = amsdu;
ar->htt.max_num_ampdu = ampdu;
out:
mutex_unlock(&ar->conf_mutex);
return res;
}
static const struct file_operations fops_htt_max_amsdu_ampdu = {
.read = ath10k_read_htt_max_amsdu_ampdu,
.write = ath10k_write_htt_max_amsdu_ampdu,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_read_fw_dbglog(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
size_t len;
char buf[96];
len = scnprintf(buf, sizeof(buf), "0x%16llx %u\n",
ar->debug.fw_dbglog_mask, ar->debug.fw_dbglog_level);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t ath10k_write_fw_dbglog(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
int ret;
char buf[96] = {0};
unsigned int log_level;
u64 mask;
ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos,
user_buf, count);
if (ret <= 0)
return ret;
ret = sscanf(buf, "%llx %u", &mask, &log_level);
if (!ret)
return -EINVAL;
if (ret == 1)
/* default if user did not specify */
log_level = ATH10K_DBGLOG_LEVEL_WARN;
mutex_lock(&ar->conf_mutex);
ar->debug.fw_dbglog_mask = mask;
ar->debug.fw_dbglog_level = log_level;
if (ar->state == ATH10K_STATE_ON) {
ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask,
ar->debug.fw_dbglog_level);
if (ret) {
ath10k_warn(ar, "dbglog cfg failed from debugfs: %d\n",
ret);
goto exit;
}
}
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
/* TODO: Would be nice to always support ethtool stats, would need to
* move the stats storage out of ath10k_debug, or always have ath10k_debug
* struct available..
*/
/* This generally cooresponds to the debugfs fw_stats file */
static const char ath10k_gstrings_stats[][ETH_GSTRING_LEN] = {
"tx_pkts_nic",
"tx_bytes_nic",
"rx_pkts_nic",
"rx_bytes_nic",
"d_noise_floor",
"d_cycle_count",
"d_phy_error",
"d_rts_bad",
"d_rts_good",
"d_tx_power", /* in .5 dbM I think */
"d_rx_crc_err", /* fcs_bad */
"d_no_beacon",
"d_tx_mpdus_queued",
"d_tx_msdu_queued",
"d_tx_msdu_dropped",
"d_local_enqued",
"d_local_freed",
"d_tx_ppdu_hw_queued",
"d_tx_ppdu_reaped",
"d_tx_fifo_underrun",
"d_tx_ppdu_abort",
"d_tx_mpdu_requed",
"d_tx_excessive_retries",
"d_tx_hw_rate",
"d_tx_dropped_sw_retries",
"d_tx_illegal_rate",
"d_tx_continuous_xretries",
"d_tx_timeout",
"d_tx_mpdu_txop_limit",
"d_pdev_resets",
"d_rx_mid_ppdu_route_change",
"d_rx_status",
"d_rx_extra_frags_ring0",
"d_rx_extra_frags_ring1",
"d_rx_extra_frags_ring2",
"d_rx_extra_frags_ring3",
"d_rx_msdu_htt",
"d_rx_mpdu_htt",
"d_rx_msdu_stack",
"d_rx_mpdu_stack",
"d_rx_phy_err",
"d_rx_phy_err_drops",
"d_rx_mpdu_errors", /* FCS, MIC, ENC */
"d_fw_crash_count",
"d_fw_warm_reset_count",
"d_fw_cold_reset_count",
};
#define ATH10K_SSTATS_LEN ARRAY_SIZE(ath10k_gstrings_stats)
void ath10k_debug_get_et_strings(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u32 sset, u8 *data)
{
if (sset == ETH_SS_STATS)
memcpy(data, *ath10k_gstrings_stats,
sizeof(ath10k_gstrings_stats));
}
int ath10k_debug_get_et_sset_count(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, int sset)
{
if (sset == ETH_SS_STATS)
return ATH10K_SSTATS_LEN;
return 0;
}
void ath10k_debug_get_et_stats(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ethtool_stats *stats, u64 *data)
{
struct ath10k *ar = hw->priv;
static const struct ath10k_fw_stats_pdev zero_stats = {};
const struct ath10k_fw_stats_pdev *pdev_stats;
int i = 0, ret;
mutex_lock(&ar->conf_mutex);
if (ar->state == ATH10K_STATE_ON) {
ret = ath10k_debug_fw_stats_request(ar);
if (ret) {
/* just print a warning and try to use older results */
ath10k_warn(ar,
"failed to get fw stats for ethtool: %d\n",
ret);
}
}
pdev_stats = list_first_entry_or_null(&ar->debug.fw_stats.pdevs,
struct ath10k_fw_stats_pdev,
list);
if (!pdev_stats) {
/* no results available so just return zeroes */
pdev_stats = &zero_stats;
}
spin_lock_bh(&ar->data_lock);
data[i++] = pdev_stats->hw_reaped; /* ppdu reaped */
data[i++] = 0; /* tx bytes */
data[i++] = pdev_stats->htt_mpdus;
data[i++] = 0; /* rx bytes */
data[i++] = pdev_stats->ch_noise_floor;
data[i++] = pdev_stats->cycle_count;
data[i++] = pdev_stats->phy_err_count;
data[i++] = pdev_stats->rts_bad;
data[i++] = pdev_stats->rts_good;
data[i++] = pdev_stats->chan_tx_power;
data[i++] = pdev_stats->fcs_bad;
data[i++] = pdev_stats->no_beacons;
data[i++] = pdev_stats->mpdu_enqued;
data[i++] = pdev_stats->msdu_enqued;
data[i++] = pdev_stats->wmm_drop;
data[i++] = pdev_stats->local_enqued;
data[i++] = pdev_stats->local_freed;
data[i++] = pdev_stats->hw_queued;
data[i++] = pdev_stats->hw_reaped;
data[i++] = pdev_stats->underrun;
data[i++] = pdev_stats->tx_abort;
data[i++] = pdev_stats->mpdus_requed;
data[i++] = pdev_stats->tx_ko;
data[i++] = pdev_stats->data_rc;
data[i++] = pdev_stats->sw_retry_failure;
data[i++] = pdev_stats->illgl_rate_phy_err;
data[i++] = pdev_stats->pdev_cont_xretry;
data[i++] = pdev_stats->pdev_tx_timeout;
data[i++] = pdev_stats->txop_ovf;
data[i++] = pdev_stats->pdev_resets;
data[i++] = pdev_stats->mid_ppdu_route_change;
data[i++] = pdev_stats->status_rcvd;
data[i++] = pdev_stats->r0_frags;
data[i++] = pdev_stats->r1_frags;
data[i++] = pdev_stats->r2_frags;
data[i++] = pdev_stats->r3_frags;
data[i++] = pdev_stats->htt_msdus;
data[i++] = pdev_stats->htt_mpdus;
data[i++] = pdev_stats->loc_msdus;
data[i++] = pdev_stats->loc_mpdus;
data[i++] = pdev_stats->phy_errs;
data[i++] = pdev_stats->phy_err_drop;
data[i++] = pdev_stats->mpdu_errs;
data[i++] = ar->stats.fw_crash_counter;
data[i++] = ar->stats.fw_warm_reset_counter;
data[i++] = ar->stats.fw_cold_reset_counter;
spin_unlock_bh(&ar->data_lock);
mutex_unlock(&ar->conf_mutex);
WARN_ON(i != ATH10K_SSTATS_LEN);
}
static const struct file_operations fops_fw_dbglog = {
.read = ath10k_read_fw_dbglog,
.write = ath10k_write_fw_dbglog,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static int ath10k_debug_cal_data_fetch(struct ath10k *ar)
{
u32 hi_addr;
__le32 addr;
int ret;
lockdep_assert_held(&ar->conf_mutex);
if (WARN_ON(ar->hw_params.cal_data_len > ATH10K_DEBUG_CAL_DATA_LEN))
return -EINVAL;
hi_addr = host_interest_item_address(HI_ITEM(hi_board_data));
ret = ath10k_hif_diag_read(ar, hi_addr, &addr, sizeof(addr));
if (ret) {
ath10k_warn(ar, "failed to read hi_board_data address: %d\n",
ret);
return ret;
}
ret = ath10k_hif_diag_read(ar, le32_to_cpu(addr), ar->debug.cal_data,
ar->hw_params.cal_data_len);
if (ret) {
ath10k_warn(ar, "failed to read calibration data: %d\n", ret);
return ret;
}
return 0;
}
static int ath10k_debug_cal_data_open(struct inode *inode, struct file *file)
{
struct ath10k *ar = inode->i_private;
mutex_lock(&ar->conf_mutex);
if (ar->state == ATH10K_STATE_ON ||
ar->state == ATH10K_STATE_UTF) {
ath10k_debug_cal_data_fetch(ar);
}
file->private_data = ar;
mutex_unlock(&ar->conf_mutex);
return 0;
}
static ssize_t ath10k_debug_cal_data_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
mutex_lock(&ar->conf_mutex);
count = simple_read_from_buffer(user_buf, count, ppos,
ar->debug.cal_data,
ar->hw_params.cal_data_len);
mutex_unlock(&ar->conf_mutex);
return count;
}
static ssize_t ath10k_write_ani_enable(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
int ret;
u8 enable;
if (kstrtou8_from_user(user_buf, count, 0, &enable))
return -EINVAL;
mutex_lock(&ar->conf_mutex);
if (ar->ani_enabled == enable) {
ret = count;
goto exit;
}
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->ani_enable,
enable);
if (ret) {
ath10k_warn(ar, "ani_enable failed from debugfs: %d\n", ret);
goto exit;
}
ar->ani_enabled = enable;
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static ssize_t ath10k_read_ani_enable(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
size_t len;
char buf[32];
len = scnprintf(buf, sizeof(buf), "%d\n", ar->ani_enabled);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static const struct file_operations fops_ani_enable = {
.read = ath10k_read_ani_enable,
.write = ath10k_write_ani_enable,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static const struct file_operations fops_cal_data = {
.open = ath10k_debug_cal_data_open,
.read = ath10k_debug_cal_data_read,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_read_nf_cal_period(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
size_t len;
char buf[32];
len = scnprintf(buf, sizeof(buf), "%d\n", ar->debug.nf_cal_period);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t ath10k_write_nf_cal_period(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
unsigned long period;
int ret;
ret = kstrtoul_from_user(user_buf, count, 0, &period);
if (ret)
return ret;
if (period > WMI_PDEV_PARAM_CAL_PERIOD_MAX)
return -EINVAL;
/* there's no way to switch back to the firmware default */
if (period == 0)
return -EINVAL;
mutex_lock(&ar->conf_mutex);
ar->debug.nf_cal_period = period;
if (ar->state != ATH10K_STATE_ON) {
/* firmware is not running, nothing else to do */
ret = count;
goto exit;
}
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->cal_period,
ar->debug.nf_cal_period);
if (ret) {
ath10k_warn(ar, "cal period cfg failed from debugfs: %d\n",
ret);
goto exit;
}
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static const struct file_operations fops_nf_cal_period = {
.read = ath10k_read_nf_cal_period,
.write = ath10k_write_nf_cal_period,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
#define ATH10K_TPC_CONFIG_BUF_SIZE (1024 * 1024)
static int ath10k_debug_tpc_stats_request(struct ath10k *ar)
{
int ret;
unsigned long time_left;
lockdep_assert_held(&ar->conf_mutex);
reinit_completion(&ar->debug.tpc_complete);
ret = ath10k_wmi_pdev_get_tpc_config(ar, WMI_TPC_CONFIG_PARAM);
if (ret) {
ath10k_warn(ar, "failed to request tpc config: %d\n", ret);
return ret;
}
time_left = wait_for_completion_timeout(&ar->debug.tpc_complete,
1 * HZ);
if (time_left == 0)
return -ETIMEDOUT;
return 0;
}
void ath10k_debug_tpc_stats_process(struct ath10k *ar,
struct ath10k_tpc_stats *tpc_stats)
{
spin_lock_bh(&ar->data_lock);
kfree(ar->debug.tpc_stats);
ar->debug.tpc_stats = tpc_stats;
complete(&ar->debug.tpc_complete);
spin_unlock_bh(&ar->data_lock);
}
ath10k: debugfs support to get final TPC stats for 10.4 variants Export the final Transmit Power Control (TPC) value, which is the minimum of control power and existing TPC value to user space via a new debugfs file "tpc_stats_final" to help with debugging. It works with the new wmi cmd and event introduced in 10.4 firmware branch. WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final $ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final TPC config for channel 5180 mode 10 CTL = 0x 0 Reg. Domain = 58 Antenna Gain = 0 Reg. Max Antenna Gain = 0 Power Limit = 60 Reg. Max Power = 60 Num tx chains = 2 Num supported rates = 109 ******************* CDD POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 ******************* STBC POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 *********************************** TXBF not supported ********************************** The existing tpc_stats debugfs file provides the dump which is minimum of target power and regulatory domain. cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats Hardware_used: QCA4019 Firmware version: firmware-5.bin_10.4-3.0-00209 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 18:14:08 +08:00
void
ath10k_debug_tpc_stats_final_process(struct ath10k *ar,
struct ath10k_tpc_stats_final *tpc_stats)
{
spin_lock_bh(&ar->data_lock);
kfree(ar->debug.tpc_stats_final);
ar->debug.tpc_stats_final = tpc_stats;
complete(&ar->debug.tpc_complete);
spin_unlock_bh(&ar->data_lock);
}
static void ath10k_tpc_stats_print(struct ath10k_tpc_stats *tpc_stats,
unsigned int j, char *buf, size_t *len)
{
int i;
size_t buf_len;
static const char table_str[][5] = { "CDD",
"STBC",
"TXBF" };
static const char pream_str[][6] = { "CCK",
"OFDM",
"HT20",
"HT40",
"VHT20",
"VHT40",
"VHT80",
"HTCUP" };
buf_len = ATH10K_TPC_CONFIG_BUF_SIZE;
*len += scnprintf(buf + *len, buf_len - *len,
"********************************\n");
*len += scnprintf(buf + *len, buf_len - *len,
"******************* %s POWER TABLE ****************\n",
table_str[j]);
*len += scnprintf(buf + *len, buf_len - *len,
"********************************\n");
*len += scnprintf(buf + *len, buf_len - *len,
ath10k: fix kernel panic while reading tpc_stats When attempt to read tpc_stats for the chipsets which support more than 3 tx chain will trigger kernel panic(kernel stack is corrupted) due to writing values on rate_code array out of range. This patch changes the array size depends on the WMI_TPC_TX_N_CHAIN and added check to avoid write values on the array if the num tx chain get in tpc config event is greater than WMI_TPC_TX_N_CHAIN. Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00057 Kernel panic log : [ 323.510944] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: bf90c654 [ 323.510944] [ 323.524390] CPU: 0 PID: 1908 Comm: cat Not tainted 3.14.77 #31 [ 323.530224] [<c021db48>] (unwind_backtrace) from [<c021ac08>] (show_stack+0x10/0x14) [ 323.537941] [<c021ac08>] (show_stack) from [<c03c53c0>] (dump_stack+0x80/0xa0) [ 323.545146] [<c03c53c0>] (dump_stack) from [<c022e4ac>] (panic+0x84/0x1e4) [ 323.552000] [<c022e4ac>] (panic) from [<c022e61c>] (__stack_chk_fail+0x10/0x14) [ 323.559350] [<c022e61c>] (__stack_chk_fail) from [<bf90c654>] (ath10k_wmi_event_pdev_tpc_config+0x424/0x438 [ath10k_core]) [ 323.570471] [<bf90c654>] (ath10k_wmi_event_pdev_tpc_config [ath10k_core]) from [<bf90d800>] (ath10k_wmi_10_4_op_rx+0x2f0/0x39c [ath10k_core]) [ 323.583047] [<bf90d800>] (ath10k_wmi_10_4_op_rx [ath10k_core]) from [<bf8fcc18>] (ath10k_htc_rx_completion_handler+0x170/0x1a0 [ath10k_core]) [ 323.595702] [<bf8fcc18>] (ath10k_htc_rx_completion_handler [ath10k_core]) from [<bf961f44>] (ath10k_pci_hif_send_complete_check+0x1f0/0x220 [ath10k_pci]) [ 323.609421] [<bf961f44>] (ath10k_pci_hif_send_complete_check [ath10k_pci]) from [<bf96562c>] (ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci]) [ 323.622490] [<bf96562c>] (ath10k_ce_per_engine_service [ath10k_pci]) from [<bf9656f0>] (ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci]) [ 323.635423] [<bf9656f0>] (ath10k_ce_per_engine_service_any [ath10k_pci]) from [<bf96365c>] (ath10k_pci_napi_poll+0x44/0xe8 [ath10k_pci]) [ 323.647665] [<bf96365c>] (ath10k_pci_napi_poll [ath10k_pci]) from [<c0599994>] (net_rx_action+0xac/0x160) [ 323.657208] [<c0599994>] (net_rx_action) from [<c02324a4>] (__do_softirq+0x104/0x294) [ 323.665017] [<c02324a4>] (__do_softirq) from [<c0232920>] (irq_exit+0x9c/0x11c) [ 323.672314] [<c0232920>] (irq_exit) from [<c0217fc0>] (handle_IRQ+0x6c/0x90) [ 323.679341] [<c0217fc0>] (handle_IRQ) from [<c02084e0>] (gic_handle_irq+0x3c/0x60) [ 323.686893] [<c02084e0>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70) [ 323.694349] Exception stack(0xdd489c58 to 0xdd489ca0) [ 323.699384] 9c40: 00000000 a0000013 [ 323.707547] 9c60: 00000000 dc4bce40 60000013 ddc1d800 dd488000 00000990 00000000 c085c800 [ 323.715707] 9c80: 00000000 dd489d44 0000092d dd489ca0 c026e664 c026e668 60000013 ffffffff [ 323.723877] [<c02095c0>] (__irq_svc) from [<c026e668>] (rcu_note_context_switch+0x170/0x184) [ 323.732298] [<c026e668>] (rcu_note_context_switch) from [<c020e928>] (__schedule+0x50/0x4d4) [ 323.740716] [<c020e928>] (__schedule) from [<c020e490>] (schedule_timeout+0x148/0x178) [ 323.748611] [<c020e490>] (schedule_timeout) from [<c020f804>] (wait_for_common+0x114/0x154) [ 323.756972] [<c020f804>] (wait_for_common) from [<bf8f6ef0>] (ath10k_tpc_stats_open+0xc8/0x340 [ath10k_core]) [ 323.766873] [<bf8f6ef0>] (ath10k_tpc_stats_open [ath10k_core]) from [<c02bb598>] (do_dentry_open+0x1ac/0x274) [ 323.776741] [<c02bb598>] (do_dentry_open) from [<c02c838c>] (do_last+0x8c0/0xb08) [ 323.784201] [<c02c838c>] (do_last) from [<c02c87e4>] (path_openat+0x210/0x598) [ 323.791408] [<c02c87e4>] (path_openat) from [<c02c9d1c>] (do_filp_open+0x2c/0x78) [ 323.798873] [<c02c9d1c>] (do_filp_open) from [<c02bc85c>] (do_sys_open+0x114/0x1b4) [ 323.806509] [<c02bc85c>] (do_sys_open) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) [ 323.814241] CPU1: stopping [ 323.816927] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.77 #31 [ 323.823008] [<c021db48>] (unwind_backtrace) from [<c021ac08>] (show_stack+0x10/0x14) [ 323.830731] [<c021ac08>] (show_stack) from [<c03c53c0>] (dump_stack+0x80/0xa0) [ 323.837934] [<c03c53c0>] (dump_stack) from [<c021cfac>] (handle_IPI+0xb8/0x140) [ 323.845224] [<c021cfac>] (handle_IPI) from [<c02084fc>] (gic_handle_irq+0x58/0x60) [ 323.852774] [<c02084fc>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70) [ 323.860233] Exception stack(0xdd499fa0 to 0xdd499fe8) [ 323.865273] 9fa0: ffffffed 00000000 1d3c9000 00000000 dd498000 dd498030 10c0387d c08b62c8 [ 323.873432] 9fc0: 4220406a 512f04d0 00000000 00000000 00000001 dd499fe8 c021838c c0218390 [ 323.881588] 9fe0: 60000013 ffffffff [ 323.885070] [<c02095c0>] (__irq_svc) from [<c0218390>] (arch_cpu_idle+0x30/0x50) [ 323.892454] [<c0218390>] (arch_cpu_idle) from [<c026500c>] (cpu_startup_entry+0xa4/0x108) [ 323.900690] [<c026500c>] (cpu_startup_entry) from [<422085a4>] (0x422085a4) Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-25 16:36:44 +08:00
"No. Preamble Rate_code ");
for (i = 0; i < WMI_TPC_TX_N_CHAIN; i++)
*len += scnprintf(buf + *len, buf_len - *len,
"tpc_value%d ", i);
*len += scnprintf(buf + *len, buf_len - *len, "\n");
for (i = 0; i < tpc_stats->rate_max; i++) {
*len += scnprintf(buf + *len, buf_len - *len,
"%8d %s 0x%2x %s\n", i,
pream_str[tpc_stats->tpc_table[j].pream_idx[i]],
tpc_stats->tpc_table[j].rate_code[i],
tpc_stats->tpc_table[j].tpc_value[i]);
}
*len += scnprintf(buf + *len, buf_len - *len,
"***********************************\n");
}
static void ath10k_tpc_stats_fill(struct ath10k *ar,
struct ath10k_tpc_stats *tpc_stats,
char *buf)
{
int j;
size_t len, buf_len;
len = 0;
buf_len = ATH10K_TPC_CONFIG_BUF_SIZE;
spin_lock_bh(&ar->data_lock);
if (!tpc_stats) {
ath10k_warn(ar, "failed to get tpc stats\n");
goto unlock;
}
len += scnprintf(buf + len, buf_len - len, "\n");
len += scnprintf(buf + len, buf_len - len,
"*************************************\n");
len += scnprintf(buf + len, buf_len - len,
"TPC config for channel %4d mode %d\n",
tpc_stats->chan_freq,
tpc_stats->phy_mode);
len += scnprintf(buf + len, buf_len - len,
"*************************************\n");
len += scnprintf(buf + len, buf_len - len,
"CTL = 0x%2x Reg. Domain = %2d\n",
tpc_stats->ctl,
tpc_stats->reg_domain);
len += scnprintf(buf + len, buf_len - len,
"Antenna Gain = %2d Reg. Max Antenna Gain = %2d\n",
tpc_stats->twice_antenna_gain,
tpc_stats->twice_antenna_reduction);
len += scnprintf(buf + len, buf_len - len,
"Power Limit = %2d Reg. Max Power = %2d\n",
tpc_stats->power_limit,
tpc_stats->twice_max_rd_power / 2);
len += scnprintf(buf + len, buf_len - len,
"Num tx chains = %2d Num supported rates = %2d\n",
tpc_stats->num_tx_chain,
tpc_stats->rate_max);
for (j = 0; j < WMI_TPC_FLAG; j++) {
switch (j) {
case WMI_TPC_TABLE_TYPE_CDD:
if (tpc_stats->flag[j] == ATH10K_TPC_TABLE_TYPE_FLAG) {
len += scnprintf(buf + len, buf_len - len,
"CDD not supported\n");
break;
}
ath10k_tpc_stats_print(tpc_stats, j, buf, &len);
break;
case WMI_TPC_TABLE_TYPE_STBC:
if (tpc_stats->flag[j] == ATH10K_TPC_TABLE_TYPE_FLAG) {
len += scnprintf(buf + len, buf_len - len,
"STBC not supported\n");
break;
}
ath10k_tpc_stats_print(tpc_stats, j, buf, &len);
break;
case WMI_TPC_TABLE_TYPE_TXBF:
if (tpc_stats->flag[j] == ATH10K_TPC_TABLE_TYPE_FLAG) {
len += scnprintf(buf + len, buf_len - len,
"TXBF not supported\n***************************\n");
break;
}
ath10k_tpc_stats_print(tpc_stats, j, buf, &len);
break;
default:
len += scnprintf(buf + len, buf_len - len,
"Invalid Type\n");
break;
}
}
unlock:
spin_unlock_bh(&ar->data_lock);
if (len >= buf_len)
buf[len - 1] = 0;
else
buf[len] = 0;
}
static int ath10k_tpc_stats_open(struct inode *inode, struct file *file)
{
struct ath10k *ar = inode->i_private;
void *buf = NULL;
int ret;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON) {
ret = -ENETDOWN;
goto err_unlock;
}
buf = vmalloc(ATH10K_TPC_CONFIG_BUF_SIZE);
if (!buf) {
ret = -ENOMEM;
goto err_unlock;
}
ret = ath10k_debug_tpc_stats_request(ar);
if (ret) {
ath10k_warn(ar, "failed to request tpc config stats: %d\n",
ret);
goto err_free;
}
ath10k_tpc_stats_fill(ar, ar->debug.tpc_stats, buf);
file->private_data = buf;
mutex_unlock(&ar->conf_mutex);
return 0;
err_free:
vfree(buf);
err_unlock:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static int ath10k_tpc_stats_release(struct inode *inode, struct file *file)
{
vfree(file->private_data);
return 0;
}
static ssize_t ath10k_tpc_stats_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
const char *buf = file->private_data;
size_t len = strlen(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static const struct file_operations fops_tpc_stats = {
.open = ath10k_tpc_stats_open,
.release = ath10k_tpc_stats_release,
.read = ath10k_tpc_stats_read,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
int ath10k_debug_start(struct ath10k *ar)
{
int ret;
lockdep_assert_held(&ar->conf_mutex);
ret = ath10k_debug_htt_stats_req(ar);
if (ret)
/* continue normally anyway, this isn't serious */
ath10k_warn(ar, "failed to start htt stats workqueue: %d\n",
ret);
if (ar->debug.fw_dbglog_mask) {
ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask,
ATH10K_DBGLOG_LEVEL_WARN);
if (ret)
/* not serious */
ath10k_warn(ar, "failed to enable dbglog during start: %d",
ret);
}
if (ar->pktlog_filter) {
ret = ath10k_wmi_pdev_pktlog_enable(ar,
ar->pktlog_filter);
if (ret)
/* not serious */
ath10k_warn(ar,
"failed to enable pktlog filter %x: %d\n",
ar->pktlog_filter, ret);
} else {
ret = ath10k_wmi_pdev_pktlog_disable(ar);
if (ret)
/* not serious */
ath10k_warn(ar, "failed to disable pktlog: %d\n", ret);
}
if (ar->debug.nf_cal_period &&
!test_bit(ATH10K_FW_FEATURE_NON_BMI,
ar->normal_mode_fw.fw_file.fw_features)) {
ret = ath10k_wmi_pdev_set_param(ar,
ar->wmi.pdev_param->cal_period,
ar->debug.nf_cal_period);
if (ret)
/* not serious */
ath10k_warn(ar, "cal period cfg failed from debug start: %d\n",
ret);
}
return ret;
}
void ath10k_debug_stop(struct ath10k *ar)
{
lockdep_assert_held(&ar->conf_mutex);
if (!test_bit(ATH10K_FW_FEATURE_NON_BMI,
ar->normal_mode_fw.fw_file.fw_features))
ath10k_debug_cal_data_fetch(ar);
/* Must not use _sync to avoid deadlock, we do that in
* ath10k_debug_destroy(). The check for htt_stats_mask is to avoid
* warning from del_timer().
*/
if (ar->debug.htt_stats_mask != 0)
cancel_delayed_work(&ar->debug.htt_stats_dwork);
ath10k_wmi_pdev_pktlog_disable(ar);
}
static ssize_t ath10k_write_simulate_radar(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
ath10k: disallow DFS simulation if DFS channel is not enabled If DFS is not enabled in hostapd (ieee80211h=0) DFS channels shall not be available for use even though the hardware may have the capability to support DFS. With this configuration (DFS disabled in hostapd) trying to bring up ath10k device in DFS channel for AP mode fails and trying to simulate DFS in ath10k debugfs results in a warning in cfg80211 complaining invalid channel and this should be avoided in the driver itself rather than false propogating RADAR detection to mac80211/cfg80211. Fix this by checking for the first vif 'is_started' state(should work for client mode as well) as all the vifs shall be configured for the same channel sys/kernel/debug/ieee80211/phy1/ath10k# echo 1 > dfs_simulate_radar WARNING: at net/wireless/chan.c:265 cfg80211_radar_event+0x24/0x60 Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211] [<c022f2d4>] (warn_slowpath_null) from [<bf72dab8>] (cfg80211_radar_event+0x24/0x60 [cfg80211]) [<bf72dab8>] (cfg80211_radar_event [cfg80211]) from [<bf7813e0>] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211]) [<bf7813e0>] (ieee80211_dfs_radar_detected_work [mac80211]) from [<c0242320>] (process_one_work+0x20c/0x32c) WARNING: at net/wireless/nl80211.c:2488 nl80211_get_mpath+0x13c/0x4cc Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211] [<c022f2d4>] (warn_slowpath_null) from [<bf72dab8>] (cfg80211_radar_event+0x24/0x60 [cfg80211]) [<bf72dab8>] (cfg80211_radar_event [cfg80211]) from [<bf7813e0>] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211]) [<bf7813e0>] (ieee80211_dfs_radar_detected_work [mac80211]) from [<c0242320>] (process_one_work+0x20c/0x32c) Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-22 23:33:11 +08:00
struct ath10k_vif *arvif;
/* Just check for for the first vif alone, as all the vifs will be
* sharing the same channel and if the channel is disabled, all the
* vifs will share the same 'is_started' state.
*/
arvif = list_first_entry(&ar->arvifs, typeof(*arvif), list);
if (!arvif->is_started)
return -EINVAL;
ieee80211_radar_detected(ar->hw);
return count;
}
static const struct file_operations fops_simulate_radar = {
.write = ath10k_write_simulate_radar,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
#define ATH10K_DFS_STAT(s, p) (\
len += scnprintf(buf + len, size - len, "%-28s : %10u\n", s, \
ar->debug.dfs_stats.p))
#define ATH10K_DFS_POOL_STAT(s, p) (\
len += scnprintf(buf + len, size - len, "%-28s : %10u\n", s, \
ar->debug.dfs_pool_stats.p))
static ssize_t ath10k_read_dfs_stats(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
int retval = 0, len = 0;
const int size = 8000;
struct ath10k *ar = file->private_data;
char *buf;
buf = kzalloc(size, GFP_KERNEL);
if (buf == NULL)
return -ENOMEM;
if (!ar->dfs_detector) {
len += scnprintf(buf + len, size - len, "DFS not enabled\n");
goto exit;
}
ar->debug.dfs_pool_stats =
ar->dfs_detector->get_stats(ar->dfs_detector);
len += scnprintf(buf + len, size - len, "Pulse detector statistics:\n");
ATH10K_DFS_STAT("reported phy errors", phy_errors);
ATH10K_DFS_STAT("pulse events reported", pulses_total);
ATH10K_DFS_STAT("DFS pulses detected", pulses_detected);
ATH10K_DFS_STAT("DFS pulses discarded", pulses_discarded);
ATH10K_DFS_STAT("Radars detected", radar_detected);
len += scnprintf(buf + len, size - len, "Global Pool statistics:\n");
ATH10K_DFS_POOL_STAT("Pool references", pool_reference);
ATH10K_DFS_POOL_STAT("Pulses allocated", pulse_allocated);
ATH10K_DFS_POOL_STAT("Pulses alloc error", pulse_alloc_error);
ATH10K_DFS_POOL_STAT("Pulses in use", pulse_used);
ATH10K_DFS_POOL_STAT("Seqs. allocated", pseq_allocated);
ATH10K_DFS_POOL_STAT("Seqs. alloc error", pseq_alloc_error);
ATH10K_DFS_POOL_STAT("Seqs. in use", pseq_used);
exit:
if (len > size)
len = size;
retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return retval;
}
static const struct file_operations fops_dfs_stats = {
.read = ath10k_read_dfs_stats,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_write_pktlog_filter(struct file *file,
const char __user *ubuf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u32 filter;
int ret;
if (kstrtouint_from_user(ubuf, count, 0, &filter))
return -EINVAL;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON) {
ar->pktlog_filter = filter;
ret = count;
goto out;
}
if (filter == ar->pktlog_filter) {
ret = count;
goto out;
}
if (filter) {
ret = ath10k_wmi_pdev_pktlog_enable(ar, filter);
if (ret) {
ath10k_warn(ar, "failed to enable pktlog filter %x: %d\n",
ar->pktlog_filter, ret);
goto out;
}
} else {
ret = ath10k_wmi_pdev_pktlog_disable(ar);
if (ret) {
ath10k_warn(ar, "failed to disable pktlog: %d\n", ret);
goto out;
}
}
ar->pktlog_filter = filter;
ret = count;
out:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static ssize_t ath10k_read_pktlog_filter(struct file *file, char __user *ubuf,
size_t count, loff_t *ppos)
{
char buf[32];
struct ath10k *ar = file->private_data;
int len = 0;
mutex_lock(&ar->conf_mutex);
len = scnprintf(buf, sizeof(buf) - len, "%08x\n",
ar->pktlog_filter);
mutex_unlock(&ar->conf_mutex);
return simple_read_from_buffer(ubuf, count, ppos, buf, len);
}
static const struct file_operations fops_pktlog_filter = {
.read = ath10k_read_pktlog_filter,
.write = ath10k_write_pktlog_filter,
.open = simple_open
};
static ssize_t ath10k_write_quiet_period(struct file *file,
const char __user *ubuf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u32 period;
if (kstrtouint_from_user(ubuf, count, 0, &period))
return -EINVAL;
if (period < ATH10K_QUIET_PERIOD_MIN) {
ath10k_warn(ar, "Quiet period %u can not be lesser than 25ms\n",
period);
return -EINVAL;
}
mutex_lock(&ar->conf_mutex);
ar->thermal.quiet_period = period;
ath10k_thermal_set_throttling(ar);
mutex_unlock(&ar->conf_mutex);
return count;
}
static ssize_t ath10k_read_quiet_period(struct file *file, char __user *ubuf,
size_t count, loff_t *ppos)
{
char buf[32];
struct ath10k *ar = file->private_data;
int len = 0;
mutex_lock(&ar->conf_mutex);
len = scnprintf(buf, sizeof(buf) - len, "%d\n",
ar->thermal.quiet_period);
mutex_unlock(&ar->conf_mutex);
return simple_read_from_buffer(ubuf, count, ppos, buf, len);
}
static const struct file_operations fops_quiet_period = {
.read = ath10k_read_quiet_period,
.write = ath10k_write_quiet_period,
.open = simple_open
};
static ssize_t ath10k_write_btcoex(struct file *file,
const char __user *ubuf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
char buf[32];
size_t buf_size;
int ret;
bool val;
u32 pdev_param;
buf_size = min(count, (sizeof(buf) - 1));
if (copy_from_user(buf, ubuf, buf_size))
return -EFAULT;
buf[buf_size] = '\0';
if (strtobool(buf, &val) != 0)
return -EINVAL;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON &&
ar->state != ATH10K_STATE_RESTARTED) {
ret = -ENETDOWN;
goto exit;
}
if (!(test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags) ^ val)) {
ret = count;
goto exit;
}
pdev_param = ar->wmi.pdev_param->enable_btcoex;
if (test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
ar->running_fw->fw_file.fw_features)) {
ret = ath10k_wmi_pdev_set_param(ar, pdev_param, val);
if (ret) {
ath10k_warn(ar, "failed to enable btcoex: %d\n", ret);
ret = count;
goto exit;
}
} else {
ath10k_info(ar, "restarting firmware due to btcoex change");
queue_work(ar->workqueue, &ar->restart_work);
}
if (val)
set_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
else
clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static ssize_t ath10k_read_btcoex(struct file *file, char __user *ubuf,
size_t count, loff_t *ppos)
{
char buf[32];
struct ath10k *ar = file->private_data;
int len = 0;
mutex_lock(&ar->conf_mutex);
len = scnprintf(buf, sizeof(buf) - len, "%d\n",
test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags));
mutex_unlock(&ar->conf_mutex);
return simple_read_from_buffer(ubuf, count, ppos, buf, len);
}
static const struct file_operations fops_btcoex = {
.read = ath10k_read_btcoex,
.write = ath10k_write_btcoex,
.open = simple_open
};
static ssize_t ath10k_write_enable_extd_tx_stats(struct file *file,
const char __user *ubuf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
u32 filter;
int ret;
if (kstrtouint_from_user(ubuf, count, 0, &filter))
return -EINVAL;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON) {
ar->debug.enable_extd_tx_stats = filter;
ret = count;
goto out;
}
if (filter == ar->debug.enable_extd_tx_stats) {
ret = count;
goto out;
}
ar->debug.enable_extd_tx_stats = filter;
ret = count;
out:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static ssize_t ath10k_read_enable_extd_tx_stats(struct file *file,
char __user *ubuf,
size_t count, loff_t *ppos)
{
char buf[32];
struct ath10k *ar = file->private_data;
int len = 0;
mutex_lock(&ar->conf_mutex);
len = scnprintf(buf, sizeof(buf) - len, "%08x\n",
ar->debug.enable_extd_tx_stats);
mutex_unlock(&ar->conf_mutex);
return simple_read_from_buffer(ubuf, count, ppos, buf, len);
}
static const struct file_operations fops_enable_extd_tx_stats = {
.read = ath10k_read_enable_extd_tx_stats,
.write = ath10k_write_enable_extd_tx_stats,
.open = simple_open
};
static ssize_t ath10k_write_peer_stats(struct file *file,
const char __user *ubuf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
char buf[32];
size_t buf_size;
int ret;
bool val;
buf_size = min(count, (sizeof(buf) - 1));
if (copy_from_user(buf, ubuf, buf_size))
return -EFAULT;
buf[buf_size] = '\0';
if (strtobool(buf, &val) != 0)
return -EINVAL;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON &&
ar->state != ATH10K_STATE_RESTARTED) {
ret = -ENETDOWN;
goto exit;
}
if (!(test_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags) ^ val)) {
ret = count;
goto exit;
}
if (val)
set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags);
else
clear_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags);
ath10k_info(ar, "restarting firmware due to Peer stats change");
queue_work(ar->workqueue, &ar->restart_work);
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static ssize_t ath10k_read_peer_stats(struct file *file, char __user *ubuf,
size_t count, loff_t *ppos)
{
char buf[32];
struct ath10k *ar = file->private_data;
int len = 0;
mutex_lock(&ar->conf_mutex);
len = scnprintf(buf, sizeof(buf) - len, "%d\n",
test_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags));
mutex_unlock(&ar->conf_mutex);
return simple_read_from_buffer(ubuf, count, ppos, buf, len);
}
static const struct file_operations fops_peer_stats = {
.read = ath10k_read_peer_stats,
.write = ath10k_write_peer_stats,
.open = simple_open
};
static ssize_t ath10k_debug_fw_checksums_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
size_t len = 0, buf_len = 4096;
ssize_t ret_cnt;
char *buf;
buf = kzalloc(buf_len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
mutex_lock(&ar->conf_mutex);
len += scnprintf(buf + len, buf_len - len,
"firmware-N.bin\t\t%08x\n",
crc32_le(0, ar->normal_mode_fw.fw_file.firmware->data,
ar->normal_mode_fw.fw_file.firmware->size));
len += scnprintf(buf + len, buf_len - len,
"athwlan\t\t\t%08x\n",
crc32_le(0, ar->normal_mode_fw.fw_file.firmware_data,
ar->normal_mode_fw.fw_file.firmware_len));
len += scnprintf(buf + len, buf_len - len,
"otp\t\t\t%08x\n",
crc32_le(0, ar->normal_mode_fw.fw_file.otp_data,
ar->normal_mode_fw.fw_file.otp_len));
len += scnprintf(buf + len, buf_len - len,
"codeswap\t\t%08x\n",
crc32_le(0, ar->normal_mode_fw.fw_file.codeswap_data,
ar->normal_mode_fw.fw_file.codeswap_len));
len += scnprintf(buf + len, buf_len - len,
"board-N.bin\t\t%08x\n",
crc32_le(0, ar->normal_mode_fw.board->data,
ar->normal_mode_fw.board->size));
len += scnprintf(buf + len, buf_len - len,
"board\t\t\t%08x\n",
crc32_le(0, ar->normal_mode_fw.board_data,
ar->normal_mode_fw.board_len));
ret_cnt = simple_read_from_buffer(user_buf, count, ppos, buf, len);
mutex_unlock(&ar->conf_mutex);
kfree(buf);
return ret_cnt;
}
static const struct file_operations fops_fw_checksums = {
.read = ath10k_debug_fw_checksums_read,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 18:14:06 +08:00
static ssize_t ath10k_sta_tid_stats_mask_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
char buf[32];
size_t len;
len = scnprintf(buf, sizeof(buf), "0x%08x\n", ar->sta_tid_stats_mask);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static ssize_t ath10k_sta_tid_stats_mask_write(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
char buf[32];
ssize_t len;
u32 mask;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (kstrtoint(buf, 0, &mask))
return -EINVAL;
ar->sta_tid_stats_mask = mask;
return len;
}
static const struct file_operations fops_sta_tid_stats_mask = {
.read = ath10k_sta_tid_stats_mask_read,
.write = ath10k_sta_tid_stats_mask_write,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
ath10k: debugfs support to get final TPC stats for 10.4 variants Export the final Transmit Power Control (TPC) value, which is the minimum of control power and existing TPC value to user space via a new debugfs file "tpc_stats_final" to help with debugging. It works with the new wmi cmd and event introduced in 10.4 firmware branch. WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final $ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final TPC config for channel 5180 mode 10 CTL = 0x 0 Reg. Domain = 58 Antenna Gain = 0 Reg. Max Antenna Gain = 0 Power Limit = 60 Reg. Max Power = 60 Num tx chains = 2 Num supported rates = 109 ******************* CDD POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 ******************* STBC POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 *********************************** TXBF not supported ********************************** The existing tpc_stats debugfs file provides the dump which is minimum of target power and regulatory domain. cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats Hardware_used: QCA4019 Firmware version: firmware-5.bin_10.4-3.0-00209 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 18:14:08 +08:00
static int ath10k_debug_tpc_stats_final_request(struct ath10k *ar)
{
int ret;
unsigned long time_left;
lockdep_assert_held(&ar->conf_mutex);
reinit_completion(&ar->debug.tpc_complete);
ret = ath10k_wmi_pdev_get_tpc_table_cmdid(ar, WMI_TPC_CONFIG_PARAM);
if (ret) {
ath10k_warn(ar, "failed to request tpc table cmdid: %d\n", ret);
return ret;
}
time_left = wait_for_completion_timeout(&ar->debug.tpc_complete,
1 * HZ);
if (time_left == 0)
return -ETIMEDOUT;
return 0;
}
static int ath10k_tpc_stats_final_open(struct inode *inode, struct file *file)
{
struct ath10k *ar = inode->i_private;
void *buf;
int ret;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON) {
ret = -ENETDOWN;
goto err_unlock;
}
buf = vmalloc(ATH10K_TPC_CONFIG_BUF_SIZE);
if (!buf) {
ret = -ENOMEM;
goto err_unlock;
}
ret = ath10k_debug_tpc_stats_final_request(ar);
if (ret) {
ath10k_warn(ar, "failed to request tpc stats final: %d\n",
ret);
goto err_free;
}
ath10k_tpc_stats_fill(ar, ar->debug.tpc_stats, buf);
file->private_data = buf;
mutex_unlock(&ar->conf_mutex);
return 0;
err_free:
vfree(buf);
err_unlock:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static int ath10k_tpc_stats_final_release(struct inode *inode,
struct file *file)
{
vfree(file->private_data);
return 0;
}
static ssize_t ath10k_tpc_stats_final_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
const char *buf = file->private_data;
unsigned int len = strlen(buf);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static const struct file_operations fops_tpc_stats_final = {
.open = ath10k_tpc_stats_final_open,
.release = ath10k_tpc_stats_final_release,
.read = ath10k_tpc_stats_final_read,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static ssize_t ath10k_write_warm_hw_reset(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
int ret;
bool val;
if (kstrtobool_from_user(user_buf, count, &val))
return -EFAULT;
if (!val)
return -EINVAL;
mutex_lock(&ar->conf_mutex);
if (ar->state != ATH10K_STATE_ON) {
ret = -ENETDOWN;
goto exit;
}
if (!(test_bit(WMI_SERVICE_RESET_CHIP, ar->wmi.svc_map)))
ath10k_warn(ar, "wmi service for reset chip is not available\n");
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pdev_reset,
WMI_RST_MODE_WARM_RESET);
if (ret) {
ath10k_warn(ar, "failed to enable warm hw reset: %d\n", ret);
goto exit;
}
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static const struct file_operations fops_warm_hw_reset = {
.write = ath10k_write_warm_hw_reset,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
static void ath10k_peer_ps_state_disable(void *data,
struct ieee80211_sta *sta)
{
struct ath10k *ar = data;
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
spin_lock_bh(&ar->data_lock);
arsta->peer_ps_state = WMI_PEER_PS_STATE_DISABLED;
spin_unlock_bh(&ar->data_lock);
}
static ssize_t ath10k_write_ps_state_enable(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
int ret;
u32 param;
u8 ps_state_enable;
if (kstrtou8_from_user(user_buf, count, 0, &ps_state_enable))
return -EINVAL;
if (ps_state_enable > 1)
return -EINVAL;
mutex_lock(&ar->conf_mutex);
if (ar->ps_state_enable == ps_state_enable) {
ret = count;
goto exit;
}
param = ar->wmi.pdev_param->peer_sta_ps_statechg_enable;
ret = ath10k_wmi_pdev_set_param(ar, param, ps_state_enable);
if (ret) {
ath10k_warn(ar, "failed to enable ps_state_enable: %d\n",
ret);
goto exit;
}
ar->ps_state_enable = ps_state_enable;
if (!ar->ps_state_enable)
ieee80211_iterate_stations_atomic(ar->hw,
ath10k_peer_ps_state_disable,
ar);
ret = count;
exit:
mutex_unlock(&ar->conf_mutex);
return ret;
}
static ssize_t ath10k_read_ps_state_enable(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ath10k *ar = file->private_data;
int len = 0;
char buf[32];
mutex_lock(&ar->conf_mutex);
len = scnprintf(buf, sizeof(buf) - len, "%d\n",
ar->ps_state_enable);
mutex_unlock(&ar->conf_mutex);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
static const struct file_operations fops_ps_state_enable = {
.read = ath10k_read_ps_state_enable,
.write = ath10k_write_ps_state_enable,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
};
int ath10k_debug_create(struct ath10k *ar)
{
ar->debug.cal_data = vzalloc(ATH10K_DEBUG_CAL_DATA_LEN);
if (!ar->debug.cal_data)
return -ENOMEM;
INIT_LIST_HEAD(&ar->debug.fw_stats.pdevs);
INIT_LIST_HEAD(&ar->debug.fw_stats.vdevs);
INIT_LIST_HEAD(&ar->debug.fw_stats.peers);
INIT_LIST_HEAD(&ar->debug.fw_stats.peers_extd);
ath10k: move fw_crash_dump allocation The fw_crash_data was allocated too late. Upon early firmware crash, before registering to mac80211, it was possible to crash the whole system: ath10k_pci 0000:00:05.0: device has crashed during init BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] PGD 0 Oops: 0002 [#1] SMP Modules linked in: ath10k_pci(O) ath10k_core(O) ath [last unloaded: ath] CPU: 3 PID: 29 Comm: kworker/u8:1 Tainted: G O 3.17.0-rc2-wl-ath+ #447 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] task: ffff88001eb01ad0 ti: ffff88001eb60000 task.ti: ffff88001eb60000 RIP: 0010:[<ffffffffa0058005>] [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] RSP: 0018:ffff88001eb63ce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc90001a09030 RDI: 0000000000000001 RBP: ffff88001eb63cf0 R08: 0000000000000000 R09: ffff8800000bb200 R10: 00000000000001e2 R11: ffff88001eb638de R12: ffff88001d7459a0 R13: ffff88001d746ab0 R14: 00000000fffe14d4 R15: ffff88001d747c60 FS: 0000000000000000(0000) GS:ffff88001fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000001df34000 CR4: 00000000000006e0 Stack: ffff88001d7459a0 ffff88001eb63d58 ffffffffa0083bbe ffff880000000010 ffff88001eb63d68 ffff88001eb63d18 0000000000000002 0000000000059010 ffffffffa0086fef 00000000deadbeef ffff88001d747a28 ffff88001d7459a0 Call Trace: [<ffffffffa0083bbe>] ath10k_pci_fw_crashed_dump+0x2e/0xd0 [ath10k_pci] [<ffffffffa0085410>] __ath10k_pci_hif_power_up+0x5f0/0x700 [ath10k_pci] [<ffffffffa0085550>] ath10k_pci_hif_power_up+0x30/0xe0 [ath10k_pci] [<ffffffffa005bc7b>] ath10k_core_register_work+0x2b/0x520 [ath10k_core] [<ffffffff810689cc>] process_one_work+0x18c/0x3f0 [<ffffffff81069011>] worker_thread+0x121/0x4a0 [<ffffffff81068ef0>] ? rescuer_thread+0x2c0/0x2c0 [<ffffffff8106daf2>] kthread+0xd2/0xf0 [<ffffffff8106da20>] ? kthread_create_on_node+0x170/0x170 [<ffffffff81857cfc>] ret_from_fork+0x7c/0xb0 [<ffffffff8106da20>] ? kthread_create_on_node+0x170/0x170 Code: 8b 40 38 48 c7 80 00 01 00 00 00 00 00 00 5b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 8b 9f 90 1d 00 00 48 8d 7b 01 <c6> 03 01 e8 e3 ec 2b e1 48 8d 7b 18 e8 6a 4f 05 e1 48 89 d8 5b RIP [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] RSP <ffff88001eb63ce8> CR2: 0000000000000000 ---[ end trace 5d0ed15b050bcc1f ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt To prevent that split debug functions and allocate fw_crash_data earlier. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-04 15:13:08 +08:00
return 0;
}
void ath10k_debug_destroy(struct ath10k *ar)
{
vfree(ar->debug.cal_data);
ar->debug.cal_data = NULL;
ath10k_debug_fw_stats_reset(ar);
kfree(ar->debug.tpc_stats);
ath10k: move fw_crash_dump allocation The fw_crash_data was allocated too late. Upon early firmware crash, before registering to mac80211, it was possible to crash the whole system: ath10k_pci 0000:00:05.0: device has crashed during init BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] PGD 0 Oops: 0002 [#1] SMP Modules linked in: ath10k_pci(O) ath10k_core(O) ath [last unloaded: ath] CPU: 3 PID: 29 Comm: kworker/u8:1 Tainted: G O 3.17.0-rc2-wl-ath+ #447 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] task: ffff88001eb01ad0 ti: ffff88001eb60000 task.ti: ffff88001eb60000 RIP: 0010:[<ffffffffa0058005>] [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] RSP: 0018:ffff88001eb63ce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc90001a09030 RDI: 0000000000000001 RBP: ffff88001eb63cf0 R08: 0000000000000000 R09: ffff8800000bb200 R10: 00000000000001e2 R11: ffff88001eb638de R12: ffff88001d7459a0 R13: ffff88001d746ab0 R14: 00000000fffe14d4 R15: ffff88001d747c60 FS: 0000000000000000(0000) GS:ffff88001fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000001df34000 CR4: 00000000000006e0 Stack: ffff88001d7459a0 ffff88001eb63d58 ffffffffa0083bbe ffff880000000010 ffff88001eb63d68 ffff88001eb63d18 0000000000000002 0000000000059010 ffffffffa0086fef 00000000deadbeef ffff88001d747a28 ffff88001d7459a0 Call Trace: [<ffffffffa0083bbe>] ath10k_pci_fw_crashed_dump+0x2e/0xd0 [ath10k_pci] [<ffffffffa0085410>] __ath10k_pci_hif_power_up+0x5f0/0x700 [ath10k_pci] [<ffffffffa0085550>] ath10k_pci_hif_power_up+0x30/0xe0 [ath10k_pci] [<ffffffffa005bc7b>] ath10k_core_register_work+0x2b/0x520 [ath10k_core] [<ffffffff810689cc>] process_one_work+0x18c/0x3f0 [<ffffffff81069011>] worker_thread+0x121/0x4a0 [<ffffffff81068ef0>] ? rescuer_thread+0x2c0/0x2c0 [<ffffffff8106daf2>] kthread+0xd2/0xf0 [<ffffffff8106da20>] ? kthread_create_on_node+0x170/0x170 [<ffffffff81857cfc>] ret_from_fork+0x7c/0xb0 [<ffffffff8106da20>] ? kthread_create_on_node+0x170/0x170 Code: 8b 40 38 48 c7 80 00 01 00 00 00 00 00 00 5b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 8b 9f 90 1d 00 00 48 8d 7b 01 <c6> 03 01 e8 e3 ec 2b e1 48 8d 7b 18 e8 6a 4f 05 e1 48 89 d8 5b RIP [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] RSP <ffff88001eb63ce8> CR2: 0000000000000000 ---[ end trace 5d0ed15b050bcc1f ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt To prevent that split debug functions and allocate fw_crash_data earlier. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-04 15:13:08 +08:00
}
int ath10k_debug_register(struct ath10k *ar)
{
ar->debug.debugfs_phy = debugfs_create_dir("ath10k",
ar->hw->wiphy->debugfsdir);
if (IS_ERR_OR_NULL(ar->debug.debugfs_phy)) {
if (IS_ERR(ar->debug.debugfs_phy))
return PTR_ERR(ar->debug.debugfs_phy);
return -ENOMEM;
}
INIT_DELAYED_WORK(&ar->debug.htt_stats_dwork,
ath10k_debug_htt_stats_dwork);
init_completion(&ar->debug.tpc_complete);
init_completion(&ar->debug.fw_stats_complete);
debugfs_create_file("fw_stats", 0400, ar->debug.debugfs_phy, ar,
&fops_fw_stats);
debugfs_create_file("fw_reset_stats", 0400, ar->debug.debugfs_phy, ar,
&fops_fw_reset_stats);
debugfs_create_file("wmi_services", 0400, ar->debug.debugfs_phy, ar,
&fops_wmi_services);
debugfs_create_file("simulate_fw_crash", 0600, ar->debug.debugfs_phy, ar,
&fops_simulate_fw_crash);
debugfs_create_file("reg_addr", 0600, ar->debug.debugfs_phy, ar,
&fops_reg_addr);
debugfs_create_file("reg_value", 0600, ar->debug.debugfs_phy, ar,
&fops_reg_value);
debugfs_create_file("mem_value", 0600, ar->debug.debugfs_phy, ar,
&fops_mem_value);
debugfs_create_file("chip_id", 0400, ar->debug.debugfs_phy, ar,
&fops_chip_id);
debugfs_create_file("htt_stats_mask", 0600, ar->debug.debugfs_phy, ar,
&fops_htt_stats_mask);
debugfs_create_file("htt_max_amsdu_ampdu", 0600, ar->debug.debugfs_phy, ar,
&fops_htt_max_amsdu_ampdu);
debugfs_create_file("fw_dbglog", 0600, ar->debug.debugfs_phy, ar,
&fops_fw_dbglog);
if (!test_bit(ATH10K_FW_FEATURE_NON_BMI,
ar->normal_mode_fw.fw_file.fw_features)) {
debugfs_create_file("cal_data", 0400, ar->debug.debugfs_phy, ar,
&fops_cal_data);
debugfs_create_file("nf_cal_period", 0600, ar->debug.debugfs_phy, ar,
&fops_nf_cal_period);
}
debugfs_create_file("ani_enable", 0600, ar->debug.debugfs_phy, ar,
&fops_ani_enable);
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:45:50 +08:00
if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) {
debugfs_create_file("dfs_simulate_radar", 0200, ar->debug.debugfs_phy,
ar, &fops_simulate_radar);
debugfs_create_bool("dfs_block_radar_events", 0200,
ar->debug.debugfs_phy,
&ar->dfs_block_radar_events);
debugfs_create_file("dfs_stats", 0400, ar->debug.debugfs_phy, ar,
&fops_dfs_stats);
}
debugfs_create_file("pktlog_filter", 0644, ar->debug.debugfs_phy, ar,
&fops_pktlog_filter);
debugfs_create_file("quiet_period", 0644, ar->debug.debugfs_phy, ar,
&fops_quiet_period);
debugfs_create_file("tpc_stats", 0400, ar->debug.debugfs_phy, ar,
&fops_tpc_stats);
if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map))
debugfs_create_file("btcoex", 0644, ar->debug.debugfs_phy, ar,
&fops_btcoex);
if (test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
debugfs_create_file("peer_stats", 0644, ar->debug.debugfs_phy, ar,
&fops_peer_stats);
debugfs_create_file("enable_extd_tx_stats", 0644,
ar->debug.debugfs_phy, ar,
&fops_enable_extd_tx_stats);
}
debugfs_create_file("fw_checksums", 0400, ar->debug.debugfs_phy, ar,
&fops_fw_checksums);
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 18:14:06 +08:00
if (IS_ENABLED(CONFIG_MAC80211_DEBUGFS))
debugfs_create_file("sta_tid_stats_mask", 0600,
ar->debug.debugfs_phy,
ar, &fops_sta_tid_stats_mask);
ath10k: debugfs support to get final TPC stats for 10.4 variants Export the final Transmit Power Control (TPC) value, which is the minimum of control power and existing TPC value to user space via a new debugfs file "tpc_stats_final" to help with debugging. It works with the new wmi cmd and event introduced in 10.4 firmware branch. WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final $ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final TPC config for channel 5180 mode 10 CTL = 0x 0 Reg. Domain = 58 Antenna Gain = 0 Reg. Max Antenna Gain = 0 Power Limit = 60 Reg. Max Power = 60 Num tx chains = 2 Num supported rates = 109 ******************* CDD POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 ******************* STBC POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 *********************************** TXBF not supported ********************************** The existing tpc_stats debugfs file provides the dump which is minimum of target power and regulatory domain. cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats Hardware_used: QCA4019 Firmware version: firmware-5.bin_10.4-3.0-00209 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 18:14:08 +08:00
if (test_bit(WMI_SERVICE_TPC_STATS_FINAL, ar->wmi.svc_map))
debugfs_create_file("tpc_stats_final", 0400,
ar->debug.debugfs_phy, ar,
&fops_tpc_stats_final);
debugfs_create_file("warm_hw_reset", 0600, ar->debug.debugfs_phy, ar,
&fops_warm_hw_reset);
debugfs_create_file("ps_state_enable", 0600, ar->debug.debugfs_phy, ar,
&fops_ps_state_enable);
return 0;
}
ath10k: move fw_crash_dump allocation The fw_crash_data was allocated too late. Upon early firmware crash, before registering to mac80211, it was possible to crash the whole system: ath10k_pci 0000:00:05.0: device has crashed during init BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] PGD 0 Oops: 0002 [#1] SMP Modules linked in: ath10k_pci(O) ath10k_core(O) ath [last unloaded: ath] CPU: 3 PID: 29 Comm: kworker/u8:1 Tainted: G O 3.17.0-rc2-wl-ath+ #447 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] task: ffff88001eb01ad0 ti: ffff88001eb60000 task.ti: ffff88001eb60000 RIP: 0010:[<ffffffffa0058005>] [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] RSP: 0018:ffff88001eb63ce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc90001a09030 RDI: 0000000000000001 RBP: ffff88001eb63cf0 R08: 0000000000000000 R09: ffff8800000bb200 R10: 00000000000001e2 R11: ffff88001eb638de R12: ffff88001d7459a0 R13: ffff88001d746ab0 R14: 00000000fffe14d4 R15: ffff88001d747c60 FS: 0000000000000000(0000) GS:ffff88001fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000001df34000 CR4: 00000000000006e0 Stack: ffff88001d7459a0 ffff88001eb63d58 ffffffffa0083bbe ffff880000000010 ffff88001eb63d68 ffff88001eb63d18 0000000000000002 0000000000059010 ffffffffa0086fef 00000000deadbeef ffff88001d747a28 ffff88001d7459a0 Call Trace: [<ffffffffa0083bbe>] ath10k_pci_fw_crashed_dump+0x2e/0xd0 [ath10k_pci] [<ffffffffa0085410>] __ath10k_pci_hif_power_up+0x5f0/0x700 [ath10k_pci] [<ffffffffa0085550>] ath10k_pci_hif_power_up+0x30/0xe0 [ath10k_pci] [<ffffffffa005bc7b>] ath10k_core_register_work+0x2b/0x520 [ath10k_core] [<ffffffff810689cc>] process_one_work+0x18c/0x3f0 [<ffffffff81069011>] worker_thread+0x121/0x4a0 [<ffffffff81068ef0>] ? rescuer_thread+0x2c0/0x2c0 [<ffffffff8106daf2>] kthread+0xd2/0xf0 [<ffffffff8106da20>] ? kthread_create_on_node+0x170/0x170 [<ffffffff81857cfc>] ret_from_fork+0x7c/0xb0 [<ffffffff8106da20>] ? kthread_create_on_node+0x170/0x170 Code: 8b 40 38 48 c7 80 00 01 00 00 00 00 00 00 5b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 8b 9f 90 1d 00 00 48 8d 7b 01 <c6> 03 01 e8 e3 ec 2b e1 48 8d 7b 18 e8 6a 4f 05 e1 48 89 d8 5b RIP [<ffffffffa0058005>] ath10k_debug_get_new_fw_crash_data+0x15/0x30 [ath10k_core] RSP <ffff88001eb63ce8> CR2: 0000000000000000 ---[ end trace 5d0ed15b050bcc1f ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt To prevent that split debug functions and allocate fw_crash_data earlier. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-04 15:13:08 +08:00
void ath10k_debug_unregister(struct ath10k *ar)
{
cancel_delayed_work_sync(&ar->debug.htt_stats_dwork);
}
#endif /* CONFIG_ATH10K_DEBUGFS */
#ifdef CONFIG_ATH10K_DEBUG
void ath10k_dbg(struct ath10k *ar, enum ath10k_debug_mask mask,
const char *fmt, ...)
{
struct va_format vaf;
va_list args;
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
if (ath10k_debug_mask & mask)
dev_printk(KERN_DEBUG, ar->dev, "%pV", &vaf);
trace_ath10k_log_dbg(ar, mask, &vaf);
va_end(args);
}
EXPORT_SYMBOL(ath10k_dbg);
void ath10k_dbg_dump(struct ath10k *ar,
enum ath10k_debug_mask mask,
const char *msg, const char *prefix,
const void *buf, size_t len)
{
char linebuf[256];
size_t linebuflen;
const void *ptr;
if (ath10k_debug_mask & mask) {
if (msg)
ath10k_dbg(ar, mask, "%s\n", msg);
for (ptr = buf; (ptr - buf) < len; ptr += 16) {
linebuflen = 0;
linebuflen += scnprintf(linebuf + linebuflen,
sizeof(linebuf) - linebuflen,
"%s%08x: ",
(prefix ? prefix : ""),
(unsigned int)(ptr - buf));
hex_dump_to_buffer(ptr, len - (ptr - buf), 16, 1,
linebuf + linebuflen,
sizeof(linebuf) - linebuflen, true);
dev_printk(KERN_DEBUG, ar->dev, "%s\n", linebuf);
}
}
/* tracing code doesn't like null strings :/ */
trace_ath10k_log_dbg_dump(ar, msg ? msg : "", prefix ? prefix : "",
buf, len);
}
EXPORT_SYMBOL(ath10k_dbg_dump);
#endif /* CONFIG_ATH10K_DEBUG */