OpenCloudOS-Kernel/drivers/cpuidle/dt_idle_states.c

225 lines
6.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
/*
* DT idle states parsing code.
*
* Copyright (C) 2014 ARM Ltd.
* Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
*/
#define pr_fmt(fmt) "DT idle-states: " fmt
#include <linux/cpuidle.h>
#include <linux/cpumask.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include "dt_idle_states.h"
static int init_state_node(struct cpuidle_state *idle_state,
const struct of_device_id *match_id,
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
struct device_node *state_node)
{
int err;
const char *desc;
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
/*
* CPUidle drivers are expected to initialize the const void *data
* pointer of the passed in struct of_device_id array to the idle
* state enter function.
*/
idle_state->enter = match_id->data;
/*
* Since this is not a "coupled" state, it's safe to assume interrupts
* won't be enabled when it exits allowing the tick to be frozen
* safely. So enter() can be also enter_s2idle() callback.
*/
idle_state->enter_s2idle = match_id->data;
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
err = of_property_read_u32(state_node, "wakeup-latency-us",
&idle_state->exit_latency);
if (err) {
u32 entry_latency, exit_latency;
err = of_property_read_u32(state_node, "entry-latency-us",
&entry_latency);
if (err) {
pr_debug(" * %pOF missing entry-latency-us property\n",
state_node);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
return -EINVAL;
}
err = of_property_read_u32(state_node, "exit-latency-us",
&exit_latency);
if (err) {
pr_debug(" * %pOF missing exit-latency-us property\n",
state_node);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
return -EINVAL;
}
/*
* If wakeup-latency-us is missing, default to entry+exit
* latencies as defined in idle states bindings
*/
idle_state->exit_latency = entry_latency + exit_latency;
}
err = of_property_read_u32(state_node, "min-residency-us",
&idle_state->target_residency);
if (err) {
pr_debug(" * %pOF missing min-residency-us property\n",
state_node);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
return -EINVAL;
}
err = of_property_read_string(state_node, "idle-state-name", &desc);
if (err)
desc = state_node->name;
idle_state->flags = CPUIDLE_FLAG_RCU_IDLE;
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
if (of_property_read_bool(state_node, "local-timer-stop"))
idle_state->flags |= CPUIDLE_FLAG_TIMER_STOP;
/*
* TODO:
* replace with kstrdup and pointer assignment when name
* and desc become string pointers
*/
strncpy(idle_state->name, state_node->name, CPUIDLE_NAME_LEN - 1);
strncpy(idle_state->desc, desc, CPUIDLE_DESC_LEN - 1);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
return 0;
}
/*
* Check that the idle state is uniform across all CPUs in the CPUidle driver
* cpumask
*/
static bool idle_state_valid(struct device_node *state_node, unsigned int idx,
const cpumask_t *cpumask)
{
int cpu;
struct device_node *cpu_node, *curr_state_node;
bool valid = true;
/*
* Compare idle state phandles for index idx on all CPUs in the
* CPUidle driver cpumask. Start from next logical cpu following
* cpumask_first(cpumask) since that's the CPU state_node was
* retrieved from. If a mismatch is found bail out straight
* away since we certainly hit a firmware misconfiguration.
*/
for (cpu = cpumask_next(cpumask_first(cpumask), cpumask);
cpu < nr_cpu_ids; cpu = cpumask_next(cpu, cpumask)) {
cpu_node = of_cpu_device_node_get(cpu);
curr_state_node = of_get_cpu_state_node(cpu_node, idx);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
if (state_node != curr_state_node)
valid = false;
of_node_put(curr_state_node);
of_node_put(cpu_node);
if (!valid)
break;
}
return valid;
}
/**
* dt_init_idle_driver() - Parse the DT idle states and initialize the
* idle driver states array
* @drv: Pointer to CPU idle driver to be initialized
* @matches: Array of of_device_id match structures to search in for
* compatible idle state nodes. The data pointer for each valid
* struct of_device_id entry in the matches array must point to
* a function with the following signature, that corresponds to
* the CPUidle state enter function signature:
*
* int (*)(struct cpuidle_device *dev,
* struct cpuidle_driver *drv,
* int index);
*
* @start_idx: First idle state index to be initialized
*
* If DT idle states are detected and are valid the state count and states
* array entries in the cpuidle driver are initialized accordingly starting
* from index start_idx.
*
* Return: number of valid DT idle states parsed, <0 on failure
*/
int dt_init_idle_driver(struct cpuidle_driver *drv,
const struct of_device_id *matches,
unsigned int start_idx)
{
struct cpuidle_state *idle_state;
struct device_node *state_node, *cpu_node;
const struct of_device_id *match_id;
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
int i, err = 0;
const cpumask_t *cpumask;
unsigned int state_idx = start_idx;
if (state_idx >= CPUIDLE_STATE_MAX)
return -EINVAL;
/*
* We get the idle states for the first logical cpu in the
* driver mask (or cpu_possible_mask if the driver cpumask is not set)
* and we check through idle_state_valid() if they are uniform
* across CPUs, otherwise we hit a firmware misconfiguration.
*/
cpumask = drv->cpumask ? : cpu_possible_mask;
cpu_node = of_cpu_device_node_get(cpumask_first(cpumask));
for (i = 0; ; i++) {
state_node = of_get_cpu_state_node(cpu_node, i);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
if (!state_node)
break;
match_id = of_match_node(matches, state_node);
if (!match_id) {
err = -ENODEV;
break;
}
if (!of_device_is_available(state_node)) {
of_node_put(state_node);
continue;
}
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
if (!idle_state_valid(state_node, i, cpumask)) {
pr_warn("%pOF idle state not valid, bailing out\n",
state_node);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
err = -EINVAL;
break;
}
if (state_idx == CPUIDLE_STATE_MAX) {
pr_warn("State index reached static CPU idle driver states array size\n");
break;
}
idle_state = &drv->states[state_idx++];
err = init_state_node(idle_state, match_id, state_node);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
if (err) {
pr_err("Parsing idle state node %pOF failed with err %d\n",
state_node, err);
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
err = -EINVAL;
break;
}
of_node_put(state_node);
}
of_node_put(state_node);
of_node_put(cpu_node);
if (err)
return err;
/* Set the number of total supported idle states. */
drv->state_count = state_idx;
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
/*
* Return the number of present and valid DT idle states, which can
* also be 0 on platforms with missing DT idle states or legacy DT
* configuration predating the DT idle states bindings.
*/
return state_idx - start_idx;
drivers: cpuidle: implement DT based idle states infrastructure On most common ARM systems, the low-power states a CPU can be put into are not discoverable in HW and require device tree bindings to describe power down suspend operations and idle states parameters. In order to enable DT based idle states and configure idle drivers, this patch implements the bulk infrastructure required to parse the device tree idle states bindings and initialize the corresponding CPUidle driver states data. The parsing API accepts a start index that defines the first idle state that should be initialized by the parsing code in order to give new and legacy driver flexibility over which states should be parsed using the new DT mechanism. The idle states node(s) is obtained from the phandle list of the first cpu in the driver cpumask; the kernel checks that the idle state node phandle is the same for all CPUs in the driver cpumask before declaring the idle state as valid and start parsing its content. The idle state enter function pointer is initialized through DT match structures passed in by the CPUidle driver, so that ARM legacy code can cope with platform specific idle entry method based on compatible string matching and the code used to initialize the enter function pointer can be moved to the DT generic layer. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-02-14 22:28:39 +08:00
}
EXPORT_SYMBOL_GPL(dt_init_idle_driver);