OpenCloudOS-Kernel/drivers/vfio/vfio_iommu_spapr_tce.c

1380 lines
32 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* VFIO: IOMMU DMA mapping support for TCE on POWER
*
* Copyright (C) 2013 IBM Corp. All rights reserved.
* Author: Alexey Kardashevskiy <aik@ozlabs.ru>
* Copyright Gavin Shan, IBM Corporation 2014.
*
* Derived from original vfio_iommu_type1.c:
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/err.h>
#include <linux/vfio.h>
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
#include <linux/vmalloc.h>
#include <linux/sched/mm.h>
#include <linux/sched/signal.h>
mm: add account_locked_vm utility function locked_vm accounting is done roughly the same way in five places, so unify them in a helper. Include the helper's caller in the debug print to distinguish between callsites. Error codes stay the same, so user-visible behavior does too. The one exception is that the -EPERM case in tce_account_locked_vm is removed because Alexey has never seen it triggered. [daniel.m.jordan@oracle.com: v3] Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com [sfr@canb.auug.org.au: fix mm/util.c] Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Alan Tull <atull@kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Moritz Fischer <mdf@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steve Sistare <steven.sistare@oracle.com> Cc: Wu Hao <hao.wu@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:30:54 +08:00
#include <linux/mm.h>
#include "vfio.h"
#include <asm/iommu.h>
#include <asm/tce.h>
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
#include <asm/mmu_context.h>
#define DRIVER_VERSION "0.1"
#define DRIVER_AUTHOR "aik@ozlabs.ru"
#define DRIVER_DESC "VFIO IOMMU SPAPR TCE"
static void tce_iommu_detach_group(void *iommu_data,
struct iommu_group *iommu_group);
/*
* VFIO IOMMU fd for SPAPR_TCE IOMMU implementation
*
* This code handles mapping and unmapping of user data buffers
* into DMA'ble space using the IOMMU
*/
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
struct tce_iommu_group {
struct list_head next;
struct iommu_group *grp;
};
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
/*
* A container needs to remember which preregistered region it has
* referenced to do proper cleanup at the userspace process exit.
*/
struct tce_iommu_prereg {
struct list_head next;
struct mm_iommu_table_group_mem_t *mem;
};
/*
* The container descriptor supports only a single group per container.
* Required by the API as the container is not supplied with the IOMMU group
* at the moment of initialization.
*/
struct tce_container {
struct mutex lock;
bool enabled;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
bool v2;
bool def_window_pending;
unsigned long locked_pages;
struct mm_struct *mm;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
struct iommu_table *tables[IOMMU_TABLE_GROUP_MAX_TABLES];
struct list_head group_list;
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
struct list_head prereg_list;
};
static long tce_iommu_mm_set(struct tce_container *container)
{
if (container->mm) {
if (container->mm == current->mm)
return 0;
return -EPERM;
}
BUG_ON(!current->mm);
container->mm = current->mm;
mmgrab(container->mm);
return 0;
}
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
static long tce_iommu_prereg_free(struct tce_container *container,
struct tce_iommu_prereg *tcemem)
{
long ret;
ret = mm_iommu_put(container->mm, tcemem->mem);
if (ret)
return ret;
list_del(&tcemem->next);
kfree(tcemem);
return 0;
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
static long tce_iommu_unregister_pages(struct tce_container *container,
__u64 vaddr, __u64 size)
{
struct mm_iommu_table_group_mem_t *mem;
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
struct tce_iommu_prereg *tcemem;
bool found = false;
long ret;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if ((vaddr & ~PAGE_MASK) || (size & ~PAGE_MASK))
return -EINVAL;
mem = mm_iommu_get(container->mm, vaddr, size >> PAGE_SHIFT);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (!mem)
return -ENOENT;
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
list_for_each_entry(tcemem, &container->prereg_list, next) {
if (tcemem->mem == mem) {
found = true;
break;
}
}
if (!found)
ret = -ENOENT;
else
ret = tce_iommu_prereg_free(container, tcemem);
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
mm_iommu_put(container->mm, mem);
return ret;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
}
static long tce_iommu_register_pages(struct tce_container *container,
__u64 vaddr, __u64 size)
{
long ret = 0;
struct mm_iommu_table_group_mem_t *mem = NULL;
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
struct tce_iommu_prereg *tcemem;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
unsigned long entries = size >> PAGE_SHIFT;
if ((vaddr & ~PAGE_MASK) || (size & ~PAGE_MASK) ||
((vaddr + size) < vaddr))
return -EINVAL;
mem = mm_iommu_get(container->mm, vaddr, entries);
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
if (mem) {
list_for_each_entry(tcemem, &container->prereg_list, next) {
if (tcemem->mem == mem) {
ret = -EBUSY;
goto put_exit;
}
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
}
} else {
ret = mm_iommu_new(container->mm, vaddr, entries, &mem);
if (ret)
return ret;
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
}
tcemem = kzalloc(sizeof(*tcemem), GFP_KERNEL);
if (!tcemem) {
ret = -ENOMEM;
goto put_exit;
}
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
tcemem->mem = mem;
list_add(&tcemem->next, &container->prereg_list);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
container->enabled = true;
return 0;
put_exit:
mm_iommu_put(container->mm, mem);
return ret;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
}
static bool tce_page_is_contained(struct mm_struct *mm, unsigned long hpa,
unsigned int it_page_shift)
{
struct page *page;
unsigned long size = 0;
if (mm_iommu_is_devmem(mm, hpa, it_page_shift, &size))
return size == (1UL << it_page_shift);
page = pfn_to_page(hpa >> PAGE_SHIFT);
/*
* Check that the TCE table granularity is not bigger than the size of
* a page we just found. Otherwise the hardware can get access to
* a bigger memory chunk that it should.
*/
return page_shift(compound_head(page)) >= it_page_shift;
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
static inline bool tce_groups_attached(struct tce_container *container)
{
return !list_empty(&container->group_list);
}
static long tce_iommu_find_table(struct tce_container *container,
phys_addr_t ioba, struct iommu_table **ptbl)
{
long i;
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) {
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
struct iommu_table *tbl = container->tables[i];
if (tbl) {
unsigned long entry = ioba >> tbl->it_page_shift;
unsigned long start = tbl->it_offset;
unsigned long end = start + tbl->it_size;
if ((start <= entry) && (entry < end)) {
*ptbl = tbl;
return i;
}
}
}
return -1;
}
static int tce_iommu_find_free_table(struct tce_container *container)
{
int i;
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) {
if (!container->tables[i])
return i;
}
return -ENOSPC;
}
static int tce_iommu_enable(struct tce_container *container)
{
int ret = 0;
unsigned long locked;
struct iommu_table_group *table_group;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
struct tce_iommu_group *tcegrp;
if (container->enabled)
return -EBUSY;
/*
* When userspace pages are mapped into the IOMMU, they are effectively
* locked memory, so, theoretically, we need to update the accounting
* of locked pages on each map and unmap. For powerpc, the map unmap
* paths can be very hot, though, and the accounting would kill
* performance, especially since it would be difficult to impossible
* to handle the accounting in real mode only.
*
* To address that, rather than precisely accounting every page, we
* instead account for a worst case on locked memory when the iommu is
* enabled and disabled. The worst case upper bound on locked memory
* is the size of the whole iommu window, which is usually relatively
* small (compared to total memory sizes) on POWER hardware.
*
* Also we don't have a nice way to fail on H_PUT_TCE due to ulimits,
* that would effectively kill the guest at random points, much better
* enforcing the limit based on the max that the guest can map.
*
* Unfortunately at the moment it counts whole tables, no matter how
* much memory the guest has. I.e. for 4GB guest and 4 IOMMU groups
* each with 2GB DMA window, 8GB will be counted here. The reason for
* this is that we cannot tell here the amount of RAM used by the guest
* as this information is only available from KVM and VFIO is
* KVM agnostic.
*
* So we do not allow enabling a container without a group attached
* as there is no way to know how much we should increment
* the locked_vm counter.
*/
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (!tce_groups_attached(container))
return -ENODEV;
tcegrp = list_first_entry(&container->group_list,
struct tce_iommu_group, next);
table_group = iommu_group_get_iommudata(tcegrp->grp);
if (!table_group)
return -ENODEV;
if (!table_group->tce32_size)
return -EPERM;
ret = tce_iommu_mm_set(container);
if (ret)
return ret;
locked = table_group->tce32_size >> PAGE_SHIFT;
mm: add account_locked_vm utility function locked_vm accounting is done roughly the same way in five places, so unify them in a helper. Include the helper's caller in the debug print to distinguish between callsites. Error codes stay the same, so user-visible behavior does too. The one exception is that the -EPERM case in tce_account_locked_vm is removed because Alexey has never seen it triggered. [daniel.m.jordan@oracle.com: v3] Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com [sfr@canb.auug.org.au: fix mm/util.c] Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Alan Tull <atull@kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Moritz Fischer <mdf@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steve Sistare <steven.sistare@oracle.com> Cc: Wu Hao <hao.wu@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:30:54 +08:00
ret = account_locked_vm(container->mm, locked, true);
if (ret)
return ret;
container->locked_pages = locked;
container->enabled = true;
return ret;
}
static void tce_iommu_disable(struct tce_container *container)
{
if (!container->enabled)
return;
container->enabled = false;
BUG_ON(!container->mm);
mm: add account_locked_vm utility function locked_vm accounting is done roughly the same way in five places, so unify them in a helper. Include the helper's caller in the debug print to distinguish between callsites. Error codes stay the same, so user-visible behavior does too. The one exception is that the -EPERM case in tce_account_locked_vm is removed because Alexey has never seen it triggered. [daniel.m.jordan@oracle.com: v3] Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com [sfr@canb.auug.org.au: fix mm/util.c] Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Alan Tull <atull@kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Moritz Fischer <mdf@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steve Sistare <steven.sistare@oracle.com> Cc: Wu Hao <hao.wu@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:30:54 +08:00
account_locked_vm(container->mm, container->locked_pages, false);
}
static void *tce_iommu_open(unsigned long arg)
{
struct tce_container *container;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if ((arg != VFIO_SPAPR_TCE_IOMMU) && (arg != VFIO_SPAPR_TCE_v2_IOMMU)) {
pr_err("tce_vfio: Wrong IOMMU type\n");
return ERR_PTR(-EINVAL);
}
container = kzalloc(sizeof(*container), GFP_KERNEL);
if (!container)
return ERR_PTR(-ENOMEM);
mutex_init(&container->lock);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
INIT_LIST_HEAD_RCU(&container->group_list);
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
INIT_LIST_HEAD_RCU(&container->prereg_list);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
container->v2 = arg == VFIO_SPAPR_TCE_v2_IOMMU;
return container;
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
static int tce_iommu_clear(struct tce_container *container,
struct iommu_table *tbl,
unsigned long entry, unsigned long pages);
static void tce_iommu_free_table(struct tce_container *container,
struct iommu_table *tbl);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
static void tce_iommu_release(void *iommu_data)
{
struct tce_container *container = iommu_data;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
struct tce_iommu_group *tcegrp;
struct tce_iommu_prereg *tcemem, *tmtmp;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
long i;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
while (tce_groups_attached(container)) {
tcegrp = list_first_entry(&container->group_list,
struct tce_iommu_group, next);
tce_iommu_detach_group(iommu_data, tcegrp->grp);
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
/*
* If VFIO created a table, it was not disposed
* by tce_iommu_detach_group() so do it now.
*/
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) {
struct iommu_table *tbl = container->tables[i];
if (!tbl)
continue;
tce_iommu_free_table(container, tbl);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
}
list_for_each_entry_safe(tcemem, tmtmp, &container->prereg_list, next)
WARN_ON(tce_iommu_prereg_free(container, tcemem));
powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30 14:52:05 +08:00
tce_iommu_disable(container);
if (container->mm)
mmdrop(container->mm);
mutex_destroy(&container->lock);
kfree(container);
}
static void tce_iommu_unuse_page(unsigned long hpa)
{
struct page *page;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
page = pfn_to_page(hpa >> PAGE_SHIFT);
unpin_user_page(page);
}
static int tce_iommu_prereg_ua_to_hpa(struct tce_container *container,
unsigned long tce, unsigned long shift,
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
unsigned long *phpa, struct mm_iommu_table_group_mem_t **pmem)
{
long ret = 0;
struct mm_iommu_table_group_mem_t *mem;
mem = mm_iommu_lookup(container->mm, tce, 1ULL << shift);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (!mem)
return -EINVAL;
KVM: PPC: Check if IOMMU page is contained in the pinned physical page A VM which has: - a DMA capable device passed through to it (eg. network card); - running a malicious kernel that ignores H_PUT_TCE failure; - capability of using IOMMU pages bigger that physical pages can create an IOMMU mapping that exposes (for example) 16MB of the host physical memory to the device when only 64K was allocated to the VM. The remaining 16MB - 64K will be some other content of host memory, possibly including pages of the VM, but also pages of host kernel memory, host programs or other VMs. The attacking VM does not control the location of the page it can map, and is only allowed to map as many pages as it has pages of RAM. We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that an IOMMU page is contained in the physical page so the PCI hardware won't get access to unassigned host memory; however this check is missing in the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and did not hit this yet as the very first time when the mapping happens we do not have tbl::it_userspace allocated yet and fall back to the userspace which in turn calls VFIO IOMMU driver, this fails and the guest does not retry, This stores the smallest preregistered page size in the preregistered region descriptor and changes the mm_iommu_xxx API to check this against the IOMMU page size. This calculates maximum page size as a minimum of the natural region alignment and compound page size. For the page shift this uses the shift returned by find_linux_pte() which indicates how the page is mapped to the current userspace - if the page is huge and this is not a zero, then it is a leaf pte and the page is mapped within the range. Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-17 15:19:13 +08:00
ret = mm_iommu_ua_to_hpa(mem, tce, shift, phpa);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (ret)
return -EINVAL;
*pmem = mem;
return 0;
}
static void tce_iommu_unuse_page_v2(struct tce_container *container,
struct iommu_table *tbl, unsigned long entry)
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
{
struct mm_iommu_table_group_mem_t *mem = NULL;
int ret;
unsigned long hpa = 0;
__be64 *pua = IOMMU_TABLE_USERSPACE_ENTRY_RO(tbl, entry);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (!pua)
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
return;
ret = tce_iommu_prereg_ua_to_hpa(container, be64_to_cpu(*pua),
tbl->it_page_shift, &hpa, &mem);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (ret)
pr_debug("%s: tce %llx at #%lx was not cached, ret=%d\n",
__func__, be64_to_cpu(*pua), entry, ret);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (mem)
mm_iommu_mapped_dec(mem);
*pua = cpu_to_be64(0);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
}
static int tce_iommu_clear(struct tce_container *container,
struct iommu_table *tbl,
unsigned long entry, unsigned long pages)
{
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
unsigned long oldhpa;
long ret;
enum dma_data_direction direction;
unsigned long lastentry = entry + pages, firstentry = entry;
for ( ; entry < lastentry; ++entry) {
if (tbl->it_indirect_levels && tbl->it_userspace) {
/*
* For multilevel tables, we can take a shortcut here
* and skip some TCEs as we know that the userspace
* addresses cache is a mirror of the real TCE table
* and if it is missing some indirect levels, then
* the hardware table does not have them allocated
* either and therefore does not require updating.
*/
__be64 *pua = IOMMU_TABLE_USERSPACE_ENTRY_RO(tbl,
entry);
if (!pua) {
/* align to level_size which is power of two */
entry |= tbl->it_level_size - 1;
continue;
}
}
cond_resched();
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
direction = DMA_NONE;
oldhpa = 0;
ret = iommu_tce_xchg_no_kill(container->mm, tbl, entry, &oldhpa,
&direction);
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
if (ret)
continue;
if (direction == DMA_NONE)
continue;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (container->v2) {
tce_iommu_unuse_page_v2(container, tbl, entry);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
continue;
}
tce_iommu_unuse_page(oldhpa);
}
iommu_tce_kill(tbl, firstentry, pages);
return 0;
}
static int tce_iommu_use_page(unsigned long tce, unsigned long *hpa)
{
struct page *page = NULL;
enum dma_data_direction direction = iommu_tce_direction(tce);
if (pin_user_pages_fast(tce & PAGE_MASK, 1,
mm/gup: change GUP fast to use flags rather than a write 'bool' To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:11 +08:00
direction != DMA_TO_DEVICE ? FOLL_WRITE : 0,
&page) != 1)
return -EFAULT;
*hpa = __pa((unsigned long) page_address(page));
return 0;
}
static long tce_iommu_build(struct tce_container *container,
struct iommu_table *tbl,
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
unsigned long entry, unsigned long tce, unsigned long pages,
enum dma_data_direction direction)
{
long i, ret = 0;
unsigned long hpa;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
enum dma_data_direction dirtmp;
for (i = 0; i < pages; ++i) {
unsigned long offset = tce & IOMMU_PAGE_MASK(tbl) & ~PAGE_MASK;
ret = tce_iommu_use_page(tce, &hpa);
if (ret)
break;
if (!tce_page_is_contained(container->mm, hpa,
tbl->it_page_shift)) {
ret = -EPERM;
break;
}
hpa |= offset;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
dirtmp = direction;
ret = iommu_tce_xchg_no_kill(container->mm, tbl, entry + i,
&hpa, &dirtmp);
if (ret) {
tce_iommu_unuse_page(hpa);
pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%ld\n",
__func__, entry << tbl->it_page_shift,
tce, ret);
break;
}
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
if (dirtmp != DMA_NONE)
tce_iommu_unuse_page(hpa);
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
tce += IOMMU_PAGE_SIZE(tbl);
}
if (ret)
tce_iommu_clear(container, tbl, entry, i);
else
iommu_tce_kill(tbl, entry, pages);
return ret;
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
static long tce_iommu_build_v2(struct tce_container *container,
struct iommu_table *tbl,
unsigned long entry, unsigned long tce, unsigned long pages,
enum dma_data_direction direction)
{
long i, ret = 0;
unsigned long hpa;
enum dma_data_direction dirtmp;
for (i = 0; i < pages; ++i) {
struct mm_iommu_table_group_mem_t *mem = NULL;
__be64 *pua = IOMMU_TABLE_USERSPACE_ENTRY(tbl, entry + i);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
ret = tce_iommu_prereg_ua_to_hpa(container,
tce, tbl->it_page_shift, &hpa, &mem);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (ret)
break;
if (!tce_page_is_contained(container->mm, hpa,
tbl->it_page_shift)) {
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
ret = -EPERM;
break;
}
/* Preserve offset within IOMMU page */
hpa |= tce & IOMMU_PAGE_MASK(tbl) & ~PAGE_MASK;
dirtmp = direction;
/* The registered region is being unregistered */
if (mm_iommu_mapped_inc(mem))
break;
ret = iommu_tce_xchg_no_kill(container->mm, tbl, entry + i,
&hpa, &dirtmp);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (ret) {
/* dirtmp cannot be DMA_NONE here */
tce_iommu_unuse_page_v2(container, tbl, entry + i);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%ld\n",
__func__, entry << tbl->it_page_shift,
tce, ret);
break;
}
if (dirtmp != DMA_NONE)
tce_iommu_unuse_page_v2(container, tbl, entry + i);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
*pua = cpu_to_be64(tce);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
tce += IOMMU_PAGE_SIZE(tbl);
}
if (ret)
tce_iommu_clear(container, tbl, entry, i);
else
iommu_tce_kill(tbl, entry, pages);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
return ret;
}
vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership control Before the IOMMU user (VFIO) would take control over the IOMMU table belonging to a specific IOMMU group. This approach did not allow sharing tables between IOMMU groups attached to the same container. This introduces a new IOMMU ownership flavour when the user can not just control the existing IOMMU table but remove/create tables on demand. If an IOMMU implements take/release_ownership() callbacks, this lets the user have full control over the IOMMU group. When the ownership is taken, the platform code removes all the windows so the caller must create them. Before returning the ownership back to the platform code, VFIO unprograms and removes all the tables it created. This changes IODA2's onwership handler to remove the existing table rather than manipulating with the existing one. From now on, iommu_take_ownership() and iommu_release_ownership() are only called from the vfio_iommu_spapr_tce driver. Old-style ownership is still supported allowing VFIO to run on older P5IOC2 and IODA IO controllers. No change in userspace-visible behaviour is expected. Since it recreates TCE tables on each ownership change, related kernel traces will appear more often. This adds a pnv_pci_ioda2_setup_default_config() which is called when PE is being configured at boot time and when the ownership is passed from VFIO to the platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:23 +08:00
static long tce_iommu_create_table(struct tce_container *container,
struct iommu_table_group *table_group,
int num,
__u32 page_shift,
__u64 window_size,
__u32 levels,
struct iommu_table **ptbl)
{
long ret, table_size;
table_size = table_group->ops->get_table_size(page_shift, window_size,
levels);
if (!table_size)
return -EINVAL;
mm: add account_locked_vm utility function locked_vm accounting is done roughly the same way in five places, so unify them in a helper. Include the helper's caller in the debug print to distinguish between callsites. Error codes stay the same, so user-visible behavior does too. The one exception is that the -EPERM case in tce_account_locked_vm is removed because Alexey has never seen it triggered. [daniel.m.jordan@oracle.com: v3] Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com [sfr@canb.auug.org.au: fix mm/util.c] Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Alan Tull <atull@kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Moritz Fischer <mdf@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steve Sistare <steven.sistare@oracle.com> Cc: Wu Hao <hao.wu@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:30:54 +08:00
ret = account_locked_vm(container->mm, table_size >> PAGE_SHIFT, true);
vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership control Before the IOMMU user (VFIO) would take control over the IOMMU table belonging to a specific IOMMU group. This approach did not allow sharing tables between IOMMU groups attached to the same container. This introduces a new IOMMU ownership flavour when the user can not just control the existing IOMMU table but remove/create tables on demand. If an IOMMU implements take/release_ownership() callbacks, this lets the user have full control over the IOMMU group. When the ownership is taken, the platform code removes all the windows so the caller must create them. Before returning the ownership back to the platform code, VFIO unprograms and removes all the tables it created. This changes IODA2's onwership handler to remove the existing table rather than manipulating with the existing one. From now on, iommu_take_ownership() and iommu_release_ownership() are only called from the vfio_iommu_spapr_tce driver. Old-style ownership is still supported allowing VFIO to run on older P5IOC2 and IODA IO controllers. No change in userspace-visible behaviour is expected. Since it recreates TCE tables on each ownership change, related kernel traces will appear more often. This adds a pnv_pci_ioda2_setup_default_config() which is called when PE is being configured at boot time and when the ownership is passed from VFIO to the platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:23 +08:00
if (ret)
return ret;
ret = table_group->ops->create_table(table_group, num,
page_shift, window_size, levels, ptbl);
WARN_ON(!ret && !(*ptbl)->it_ops->free);
powerpc/powernv/ioda: Allocate indirect TCE levels on demand At the moment we allocate the entire TCE table, twice (hardware part and userspace translation cache). This normally works as we normally have contigous memory and the guest will map entire RAM for 64bit DMA. However if we have sparse RAM (one example is a memory device), then we will allocate TCEs which will never be used as the guest only maps actual memory for DMA. If it is a single level TCE table, there is nothing we can really do but if it a multilevel table, we can skip allocating TCEs we know we won't need. This adds ability to allocate only first level, saving memory. This changes iommu_table::free() to avoid allocating of an extra level; iommu_table::set() will do this when needed. This adds @alloc parameter to iommu_table::exchange() to tell the callback if it can allocate an extra level; the flag is set to "false" for the realmode KVM handlers of H_PUT_TCE hcalls and the callback returns H_TOO_HARD. This still requires the entire table to be counted in mm::locked_vm. To be conservative, this only does on-demand allocation when the usespace cache table is requested which is the case of VFIO. The example math for a system replicating a powernv setup with NVLink2 in a guest: 16GB RAM mapped at 0x0 128GB GPU RAM window (16GB of actual RAM) mapped at 0x244000000000 the table to cover that all with 64K pages takes: (((0x244000000000 + 0x2000000000) >> 16)*8)>>20 = 4556MB If we allocate only necessary TCE levels, we will only need: (((0x400000000 + 0x400000000) >> 16)*8)>>20 = 4MB (plus some for indirect levels). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-04 14:13:49 +08:00
WARN_ON(!ret && ((*ptbl)->it_allocated_size > table_size));
vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership control Before the IOMMU user (VFIO) would take control over the IOMMU table belonging to a specific IOMMU group. This approach did not allow sharing tables between IOMMU groups attached to the same container. This introduces a new IOMMU ownership flavour when the user can not just control the existing IOMMU table but remove/create tables on demand. If an IOMMU implements take/release_ownership() callbacks, this lets the user have full control over the IOMMU group. When the ownership is taken, the platform code removes all the windows so the caller must create them. Before returning the ownership back to the platform code, VFIO unprograms and removes all the tables it created. This changes IODA2's onwership handler to remove the existing table rather than manipulating with the existing one. From now on, iommu_take_ownership() and iommu_release_ownership() are only called from the vfio_iommu_spapr_tce driver. Old-style ownership is still supported allowing VFIO to run on older P5IOC2 and IODA IO controllers. No change in userspace-visible behaviour is expected. Since it recreates TCE tables on each ownership change, related kernel traces will appear more often. This adds a pnv_pci_ioda2_setup_default_config() which is called when PE is being configured at boot time and when the ownership is passed from VFIO to the platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:23 +08:00
return ret;
}
static void tce_iommu_free_table(struct tce_container *container,
struct iommu_table *tbl)
vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership control Before the IOMMU user (VFIO) would take control over the IOMMU table belonging to a specific IOMMU group. This approach did not allow sharing tables between IOMMU groups attached to the same container. This introduces a new IOMMU ownership flavour when the user can not just control the existing IOMMU table but remove/create tables on demand. If an IOMMU implements take/release_ownership() callbacks, this lets the user have full control over the IOMMU group. When the ownership is taken, the platform code removes all the windows so the caller must create them. Before returning the ownership back to the platform code, VFIO unprograms and removes all the tables it created. This changes IODA2's onwership handler to remove the existing table rather than manipulating with the existing one. From now on, iommu_take_ownership() and iommu_release_ownership() are only called from the vfio_iommu_spapr_tce driver. Old-style ownership is still supported allowing VFIO to run on older P5IOC2 and IODA IO controllers. No change in userspace-visible behaviour is expected. Since it recreates TCE tables on each ownership change, related kernel traces will appear more often. This adds a pnv_pci_ioda2_setup_default_config() which is called when PE is being configured at boot time and when the ownership is passed from VFIO to the platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:23 +08:00
{
unsigned long pages = tbl->it_allocated_size >> PAGE_SHIFT;
iommu_tce_table_put(tbl);
mm: add account_locked_vm utility function locked_vm accounting is done roughly the same way in five places, so unify them in a helper. Include the helper's caller in the debug print to distinguish between callsites. Error codes stay the same, so user-visible behavior does too. The one exception is that the -EPERM case in tce_account_locked_vm is removed because Alexey has never seen it triggered. [daniel.m.jordan@oracle.com: v3] Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com [sfr@canb.auug.org.au: fix mm/util.c] Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Alan Tull <atull@kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Moritz Fischer <mdf@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Steve Sistare <steven.sistare@oracle.com> Cc: Wu Hao <hao.wu@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:30:54 +08:00
account_locked_vm(container->mm, pages, false);
vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership control Before the IOMMU user (VFIO) would take control over the IOMMU table belonging to a specific IOMMU group. This approach did not allow sharing tables between IOMMU groups attached to the same container. This introduces a new IOMMU ownership flavour when the user can not just control the existing IOMMU table but remove/create tables on demand. If an IOMMU implements take/release_ownership() callbacks, this lets the user have full control over the IOMMU group. When the ownership is taken, the platform code removes all the windows so the caller must create them. Before returning the ownership back to the platform code, VFIO unprograms and removes all the tables it created. This changes IODA2's onwership handler to remove the existing table rather than manipulating with the existing one. From now on, iommu_take_ownership() and iommu_release_ownership() are only called from the vfio_iommu_spapr_tce driver. Old-style ownership is still supported allowing VFIO to run on older P5IOC2 and IODA IO controllers. No change in userspace-visible behaviour is expected. Since it recreates TCE tables on each ownership change, related kernel traces will appear more often. This adds a pnv_pci_ioda2_setup_default_config() which is called when PE is being configured at boot time and when the ownership is passed from VFIO to the platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:23 +08:00
}
static long tce_iommu_create_window(struct tce_container *container,
__u32 page_shift, __u64 window_size, __u32 levels,
__u64 *start_addr)
{
struct tce_iommu_group *tcegrp;
struct iommu_table_group *table_group;
struct iommu_table *tbl = NULL;
long ret, num;
num = tce_iommu_find_free_table(container);
if (num < 0)
return num;
/* Get the first group for ops::create_table */
tcegrp = list_first_entry(&container->group_list,
struct tce_iommu_group, next);
table_group = iommu_group_get_iommudata(tcegrp->grp);
if (!table_group)
return -EFAULT;
if (!(table_group->pgsizes & (1ULL << page_shift)))
return -EINVAL;
if (!table_group->ops->set_window || !table_group->ops->unset_window ||
!table_group->ops->get_table_size ||
!table_group->ops->create_table)
return -EPERM;
/* Create TCE table */
ret = tce_iommu_create_table(container, table_group, num,
page_shift, window_size, levels, &tbl);
if (ret)
return ret;
BUG_ON(!tbl->it_ops->free);
/*
* Program the table to every group.
* Groups have been tested for compatibility at the attach time.
*/
list_for_each_entry(tcegrp, &container->group_list, next) {
table_group = iommu_group_get_iommudata(tcegrp->grp);
ret = table_group->ops->set_window(table_group, num, tbl);
if (ret)
goto unset_exit;
}
container->tables[num] = tbl;
/* Return start address assigned by platform in create_table() */
*start_addr = tbl->it_offset << tbl->it_page_shift;
return 0;
unset_exit:
list_for_each_entry(tcegrp, &container->group_list, next) {
table_group = iommu_group_get_iommudata(tcegrp->grp);
table_group->ops->unset_window(table_group, num);
}
tce_iommu_free_table(container, tbl);
return ret;
}
static long tce_iommu_remove_window(struct tce_container *container,
__u64 start_addr)
{
struct iommu_table_group *table_group = NULL;
struct iommu_table *tbl;
struct tce_iommu_group *tcegrp;
int num;
num = tce_iommu_find_table(container, start_addr, &tbl);
if (num < 0)
return -EINVAL;
BUG_ON(!tbl->it_size);
tce_iommu_clear(container, tbl, tbl->it_offset, tbl->it_size);
/* Detach groups from IOMMUs */
list_for_each_entry(tcegrp, &container->group_list, next) {
table_group = iommu_group_get_iommudata(tcegrp->grp);
/*
* SPAPR TCE IOMMU exposes the default DMA window to
* the guest via dma32_window_start/size of
* VFIO_IOMMU_SPAPR_TCE_GET_INFO. Some platforms allow
* the userspace to remove this window, some do not so
* here we check for the platform capability.
*/
if (!table_group->ops || !table_group->ops->unset_window)
return -EPERM;
table_group->ops->unset_window(table_group, num);
}
/* Free table */
tce_iommu_free_table(container, tbl);
container->tables[num] = NULL;
return 0;
}
static long tce_iommu_create_default_window(struct tce_container *container)
{
long ret;
__u64 start_addr = 0;
struct tce_iommu_group *tcegrp;
struct iommu_table_group *table_group;
if (!container->def_window_pending)
return 0;
if (!tce_groups_attached(container))
return -ENODEV;
tcegrp = list_first_entry(&container->group_list,
struct tce_iommu_group, next);
table_group = iommu_group_get_iommudata(tcegrp->grp);
if (!table_group)
return -ENODEV;
ret = tce_iommu_create_window(container, IOMMU_PAGE_SHIFT_4K,
table_group->tce32_size, 1, &start_addr);
WARN_ON_ONCE(!ret && start_addr);
if (!ret)
container->def_window_pending = false;
return ret;
}
static long vfio_spapr_ioctl_eeh_pe_op(struct iommu_group *group,
unsigned long arg)
{
struct eeh_pe *pe;
struct vfio_eeh_pe_op op;
unsigned long minsz;
pe = eeh_iommu_group_to_pe(group);
if (!pe)
return -ENODEV;
minsz = offsetofend(struct vfio_eeh_pe_op, op);
if (copy_from_user(&op, (void __user *)arg, minsz))
return -EFAULT;
if (op.argsz < minsz || op.flags)
return -EINVAL;
switch (op.op) {
case VFIO_EEH_PE_DISABLE:
return eeh_pe_set_option(pe, EEH_OPT_DISABLE);
case VFIO_EEH_PE_ENABLE:
return eeh_pe_set_option(pe, EEH_OPT_ENABLE);
case VFIO_EEH_PE_UNFREEZE_IO:
return eeh_pe_set_option(pe, EEH_OPT_THAW_MMIO);
case VFIO_EEH_PE_UNFREEZE_DMA:
return eeh_pe_set_option(pe, EEH_OPT_THAW_DMA);
case VFIO_EEH_PE_GET_STATE:
return eeh_pe_get_state(pe);
break;
case VFIO_EEH_PE_RESET_DEACTIVATE:
return eeh_pe_reset(pe, EEH_RESET_DEACTIVATE, true);
case VFIO_EEH_PE_RESET_HOT:
return eeh_pe_reset(pe, EEH_RESET_HOT, true);
case VFIO_EEH_PE_RESET_FUNDAMENTAL:
return eeh_pe_reset(pe, EEH_RESET_FUNDAMENTAL, true);
case VFIO_EEH_PE_CONFIGURE:
return eeh_pe_configure(pe);
case VFIO_EEH_PE_INJECT_ERR:
minsz = offsetofend(struct vfio_eeh_pe_op, err.mask);
if (op.argsz < minsz)
return -EINVAL;
if (copy_from_user(&op, (void __user *)arg, minsz))
return -EFAULT;
return eeh_pe_inject_err(pe, op.err.type, op.err.func,
op.err.addr, op.err.mask);
default:
return -EINVAL;
}
}
static long tce_iommu_ioctl(void *iommu_data,
unsigned int cmd, unsigned long arg)
{
struct tce_container *container = iommu_data;
unsigned long minsz, ddwsz;
long ret;
switch (cmd) {
case VFIO_CHECK_EXTENSION:
switch (arg) {
case VFIO_SPAPR_TCE_IOMMU:
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
case VFIO_SPAPR_TCE_v2_IOMMU:
return 1;
case VFIO_EEH:
return eeh_enabled();
default:
return 0;
}
}
/*
* Sanity check to prevent one userspace from manipulating
* another userspace mm.
*/
BUG_ON(!container);
if (container->mm && container->mm != current->mm)
return -EPERM;
switch (cmd) {
case VFIO_IOMMU_SPAPR_TCE_GET_INFO: {
struct vfio_iommu_spapr_tce_info info;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
struct tce_iommu_group *tcegrp;
struct iommu_table_group *table_group;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (!tce_groups_attached(container))
return -ENXIO;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
tcegrp = list_first_entry(&container->group_list,
struct tce_iommu_group, next);
table_group = iommu_group_get_iommudata(tcegrp->grp);
if (!table_group)
return -ENXIO;
minsz = offsetofend(struct vfio_iommu_spapr_tce_info,
dma32_window_size);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.dma32_window_start = table_group->tce32_start;
info.dma32_window_size = table_group->tce32_size;
info.flags = 0;
memset(&info.ddw, 0, sizeof(info.ddw));
if (table_group->max_dynamic_windows_supported &&
container->v2) {
info.flags |= VFIO_IOMMU_SPAPR_INFO_DDW;
info.ddw.pgsizes = table_group->pgsizes;
info.ddw.max_dynamic_windows_supported =
table_group->max_dynamic_windows_supported;
info.ddw.levels = table_group->max_levels;
}
ddwsz = offsetofend(struct vfio_iommu_spapr_tce_info, ddw);
if (info.argsz >= ddwsz)
minsz = ddwsz;
if (copy_to_user((void __user *)arg, &info, minsz))
return -EFAULT;
return 0;
}
case VFIO_IOMMU_MAP_DMA: {
struct vfio_iommu_type1_dma_map param;
struct iommu_table *tbl = NULL;
long num;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
enum dma_data_direction direction;
if (!container->enabled)
return -EPERM;
minsz = offsetofend(struct vfio_iommu_type1_dma_map, size);
if (copy_from_user(&param, (void __user *)arg, minsz))
return -EFAULT;
if (param.argsz < minsz)
return -EINVAL;
if (param.flags & ~(VFIO_DMA_MAP_FLAG_READ |
VFIO_DMA_MAP_FLAG_WRITE))
return -EINVAL;
ret = tce_iommu_create_default_window(container);
if (ret)
return ret;
num = tce_iommu_find_table(container, param.iova, &tbl);
if (num < 0)
return -ENXIO;
if ((param.size & ~IOMMU_PAGE_MASK(tbl)) ||
(param.vaddr & ~IOMMU_PAGE_MASK(tbl)))
return -EINVAL;
/* iova is checked by the IOMMU API */
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
if (param.flags & VFIO_DMA_MAP_FLAG_READ) {
if (param.flags & VFIO_DMA_MAP_FLAG_WRITE)
direction = DMA_BIDIRECTIONAL;
else
direction = DMA_TO_DEVICE;
} else {
if (param.flags & VFIO_DMA_MAP_FLAG_WRITE)
direction = DMA_FROM_DEVICE;
else
return -EINVAL;
}
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
ret = iommu_tce_put_param_check(tbl, param.iova, param.vaddr);
if (ret)
return ret;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (container->v2)
ret = tce_iommu_build_v2(container, tbl,
param.iova >> tbl->it_page_shift,
param.vaddr,
param.size >> tbl->it_page_shift,
direction);
else
ret = tce_iommu_build(container, tbl,
param.iova >> tbl->it_page_shift,
param.vaddr,
param.size >> tbl->it_page_shift,
direction);
iommu_flush_tce(tbl);
return ret;
}
case VFIO_IOMMU_UNMAP_DMA: {
struct vfio_iommu_type1_dma_unmap param;
struct iommu_table *tbl = NULL;
long num;
if (!container->enabled)
return -EPERM;
minsz = offsetofend(struct vfio_iommu_type1_dma_unmap,
size);
if (copy_from_user(&param, (void __user *)arg, minsz))
return -EFAULT;
if (param.argsz < minsz)
return -EINVAL;
/* No flag is supported now */
if (param.flags)
return -EINVAL;
ret = tce_iommu_create_default_window(container);
if (ret)
return ret;
num = tce_iommu_find_table(container, param.iova, &tbl);
if (num < 0)
return -ENXIO;
if (param.size & ~IOMMU_PAGE_MASK(tbl))
return -EINVAL;
ret = iommu_tce_clear_param_check(tbl, param.iova, 0,
param.size >> tbl->it_page_shift);
if (ret)
return ret;
ret = tce_iommu_clear(container, tbl,
param.iova >> tbl->it_page_shift,
param.size >> tbl->it_page_shift);
iommu_flush_tce(tbl);
return ret;
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
case VFIO_IOMMU_SPAPR_REGISTER_MEMORY: {
struct vfio_iommu_spapr_register_memory param;
if (!container->v2)
break;
minsz = offsetofend(struct vfio_iommu_spapr_register_memory,
size);
ret = tce_iommu_mm_set(container);
if (ret)
return ret;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (copy_from_user(&param, (void __user *)arg, minsz))
return -EFAULT;
if (param.argsz < minsz)
return -EINVAL;
/* No flag is supported now */
if (param.flags)
return -EINVAL;
mutex_lock(&container->lock);
ret = tce_iommu_register_pages(container, param.vaddr,
param.size);
mutex_unlock(&container->lock);
return ret;
}
case VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY: {
struct vfio_iommu_spapr_register_memory param;
if (!container->v2)
break;
if (!container->mm)
return -EPERM;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
minsz = offsetofend(struct vfio_iommu_spapr_register_memory,
size);
if (copy_from_user(&param, (void __user *)arg, minsz))
return -EFAULT;
if (param.argsz < minsz)
return -EINVAL;
/* No flag is supported now */
if (param.flags)
return -EINVAL;
mutex_lock(&container->lock);
ret = tce_iommu_unregister_pages(container, param.vaddr,
param.size);
mutex_unlock(&container->lock);
return ret;
}
case VFIO_IOMMU_ENABLE:
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (container->v2)
break;
mutex_lock(&container->lock);
ret = tce_iommu_enable(container);
mutex_unlock(&container->lock);
return ret;
case VFIO_IOMMU_DISABLE:
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (container->v2)
break;
mutex_lock(&container->lock);
tce_iommu_disable(container);
mutex_unlock(&container->lock);
return 0;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
case VFIO_EEH_PE_OP: {
struct tce_iommu_group *tcegrp;
ret = 0;
list_for_each_entry(tcegrp, &container->group_list, next) {
ret = vfio_spapr_ioctl_eeh_pe_op(tcegrp->grp, arg);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (ret)
return ret;
}
return ret;
}
case VFIO_IOMMU_SPAPR_TCE_CREATE: {
struct vfio_iommu_spapr_tce_create create;
if (!container->v2)
break;
ret = tce_iommu_mm_set(container);
if (ret)
return ret;
if (!tce_groups_attached(container))
return -ENXIO;
minsz = offsetofend(struct vfio_iommu_spapr_tce_create,
start_addr);
if (copy_from_user(&create, (void __user *)arg, minsz))
return -EFAULT;
if (create.argsz < minsz)
return -EINVAL;
if (create.flags)
return -EINVAL;
mutex_lock(&container->lock);
ret = tce_iommu_create_default_window(container);
if (!ret)
ret = tce_iommu_create_window(container,
create.page_shift,
create.window_size, create.levels,
&create.start_addr);
mutex_unlock(&container->lock);
if (!ret && copy_to_user((void __user *)arg, &create, minsz))
ret = -EFAULT;
return ret;
}
case VFIO_IOMMU_SPAPR_TCE_REMOVE: {
struct vfio_iommu_spapr_tce_remove remove;
if (!container->v2)
break;
ret = tce_iommu_mm_set(container);
if (ret)
return ret;
if (!tce_groups_attached(container))
return -ENXIO;
minsz = offsetofend(struct vfio_iommu_spapr_tce_remove,
start_addr);
if (copy_from_user(&remove, (void __user *)arg, minsz))
return -EFAULT;
if (remove.argsz < minsz)
return -EINVAL;
if (remove.flags)
return -EINVAL;
if (container->def_window_pending && !remove.start_addr) {
container->def_window_pending = false;
return 0;
}
mutex_lock(&container->lock);
ret = tce_iommu_remove_window(container, remove.start_addr);
mutex_unlock(&container->lock);
return ret;
}
}
return -ENOTTY;
}
vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:10 +08:00
static void tce_iommu_release_ownership(struct tce_container *container,
struct iommu_table_group *table_group)
{
vfio: powerpc/spapr: powerpc/powernv/ioda2: Use DMA windows API in ownership control Before the IOMMU user (VFIO) would take control over the IOMMU table belonging to a specific IOMMU group. This approach did not allow sharing tables between IOMMU groups attached to the same container. This introduces a new IOMMU ownership flavour when the user can not just control the existing IOMMU table but remove/create tables on demand. If an IOMMU implements take/release_ownership() callbacks, this lets the user have full control over the IOMMU group. When the ownership is taken, the platform code removes all the windows so the caller must create them. Before returning the ownership back to the platform code, VFIO unprograms and removes all the tables it created. This changes IODA2's onwership handler to remove the existing table rather than manipulating with the existing one. From now on, iommu_take_ownership() and iommu_release_ownership() are only called from the vfio_iommu_spapr_tce driver. Old-style ownership is still supported allowing VFIO to run on older P5IOC2 and IODA IO controllers. No change in userspace-visible behaviour is expected. Since it recreates TCE tables on each ownership change, related kernel traces will appear more often. This adds a pnv_pci_ioda2_setup_default_config() which is called when PE is being configured at boot time and when the ownership is passed from VFIO to the platform code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:23 +08:00
long i;
if (!table_group->ops->unset_window) {
WARN_ON_ONCE(1);
return;
}
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) {
if (container->tables[i]) {
tce_iommu_clear(container, container->tables[i],
container->tables[i]->it_offset,
container->tables[i]->it_size);
table_group->ops->unset_window(table_group, i);
}
}
vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:10 +08:00
}
powerpc/iommu: Add "borrowing" iommu_table_group_ops PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows for PEs: control the ownership, create/set/unset a table the hardware for dynamic DMA windows (DDW). VFIO uses the API to implement support on POWER. So far only PowerNV IODA2 (POWER8 and newer machines) implemented this and other cases (POWER7 or nested KVM) did not and instead reused existing iommu_table structs. This means 1) no DDW 2) ownership transfer is done directly in the VFIO SPAPR TCE driver. Soon POWER is going to get its own iommu_ops and ownership control is going to move there. This implements spapr_tce_table_group_ops which borrows iommu_table tables. The upside is that VFIO needs to know less about POWER. The new ops returns the existing table from create_table() and only checks if the same window is already set. This is only going to work if the default DMA window starts table_group.tce32_start and as big as pe->table_group.tce32_size (not the case for IODA2+ PowerNV). This changes iommu_table_group_ops::take_ownership() to return an error if borrowing a table failed. This should not cause any visible change in behavior for PowerNV. pSeries was not that well tested/supported anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> [mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com
2023-03-07 01:30:20 +08:00
static long tce_iommu_take_ownership(struct tce_container *container,
vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:10 +08:00
struct iommu_table_group *table_group)
{
long i, ret = 0;
/* Set all windows to the new group */
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) {
struct iommu_table *tbl = container->tables[i];
if (!tbl)
continue;
ret = table_group->ops->set_window(table_group, i, tbl);
if (ret)
goto release_exit;
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
return 0;
release_exit:
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i)
table_group->ops->unset_window(table_group, i);
return ret;
vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:10 +08:00
}
static int tce_iommu_attach_group(void *iommu_data,
struct iommu_group *iommu_group, enum vfio_group_type type)
{
int ret = 0;
struct tce_container *container = iommu_data;
struct iommu_table_group *table_group;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
struct tce_iommu_group *tcegrp = NULL;
if (type == VFIO_EMULATED_IOMMU)
return -EINVAL;
mutex_lock(&container->lock);
/* pr_debug("tce_vfio: Attaching group #%u to iommu %p\n",
iommu_group_id(iommu_group), iommu_group); */
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
table_group = iommu_group_get_iommudata(iommu_group);
vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null The recently added mediated VFIO driver doesn't know about powerpc iommu. It thus doesn't register a struct iommu_table_group in the iommu group upon device creation. The iommu_data pointer hence remains null. This causes a kernel oops when userspace tries to set the iommu type of a container associated with a mediated device to VFIO_SPAPR_TCE_v2_IOMMU. [ 82.585440] mtty mtty: MDEV: Registered [ 87.655522] iommu: Adding device 83b8f4f2-509f-382f-3c1e-e6bfe0fa1001 to group 10 [ 87.655527] vfio_mdev 83b8f4f2-509f-382f-3c1e-e6bfe0fa1001: MDEV: group_id = 10 [ 116.297184] Unable to handle kernel paging request for data at address 0x00000030 [ 116.297389] Faulting instruction address: 0xd000000007870524 [ 116.297465] Oops: Kernel access of bad area, sig: 11 [#1] [ 116.297611] SMP NR_CPUS=2048 [ 116.297611] NUMA [ 116.297627] PowerNV ... [ 116.297954] CPU: 33 PID: 7067 Comm: qemu-system-ppc Not tainted 4.10.0-rc5-mdev-test #8 [ 116.297993] task: c000000e7718b680 task.stack: c000000e77214000 [ 116.298025] NIP: d000000007870524 LR: d000000007870518 CTR: 0000000000000000 [ 116.298064] REGS: c000000e77217990 TRAP: 0300 Not tainted (4.10.0-rc5-mdev-test) [ 116.298103] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> [ 116.298107] CR: 84004444 XER: 00000000 [ 116.298154] CFAR: c00000000000888c DAR: 0000000000000030 DSISR: 40000000 SOFTE: 1 GPR00: d000000007870518 c000000e77217c10 d00000000787b0ed c000000eed2103c0 GPR04: 0000000000000000 0000000000000000 c000000eed2103e0 0000000f24320000 GPR08: 0000000000000104 0000000000000001 0000000000000000 d0000000078729b0 GPR12: c00000000025b7e0 c00000000fe08400 0000000000000001 000001002d31d100 GPR16: 000001002c22c850 00003ffff315c750 0000000043145680 0000000043141bc0 GPR20: ffffffffffffffed fffffffffffff000 0000000020003b65 d000000007706018 GPR24: c000000f16cf0d98 d000000007706000 c000000003f42980 c000000003f42980 GPR28: c000000f1575ac00 c000000003f429c8 0000000000000000 c000000eed2103c0 [ 116.298504] NIP [d000000007870524] tce_iommu_attach_group+0x10c/0x360 [vfio_iommu_spapr_tce] [ 116.298555] LR [d000000007870518] tce_iommu_attach_group+0x100/0x360 [vfio_iommu_spapr_tce] [ 116.298601] Call Trace: [ 116.298610] [c000000e77217c10] [d000000007870518] tce_iommu_attach_group+0x100/0x360 [vfio_iommu_spapr_tce] (unreliable) [ 116.298671] [c000000e77217cb0] [d0000000077033a0] vfio_fops_unl_ioctl+0x278/0x3e0 [vfio] [ 116.298713] [c000000e77217d40] [c0000000002a3ebc] do_vfs_ioctl+0xcc/0x8b0 [ 116.298745] [c000000e77217de0] [c0000000002a4700] SyS_ioctl+0x60/0xc0 [ 116.298782] [c000000e77217e30] [c00000000000b220] system_call+0x38/0xfc [ 116.298812] Instruction dump: [ 116.298828] 7d3f4b78 409effc8 3d220000 e9298020 3c800140 38a00018 608480c0 e8690028 [ 116.298869] 4800249d e8410018 7c7f1b79 41820230 <e93e0030> 2fa90000 419e0114 e9090020 [ 116.298914] ---[ end trace 1e10b0ced08b9120 ]--- This patch fixes the oops. Reported-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-01-25 00:50:26 +08:00
if (!table_group) {
ret = -ENODEV;
goto unlock_exit;
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
powerpc/iommu: Add "borrowing" iommu_table_group_ops PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows for PEs: control the ownership, create/set/unset a table the hardware for dynamic DMA windows (DDW). VFIO uses the API to implement support on POWER. So far only PowerNV IODA2 (POWER8 and newer machines) implemented this and other cases (POWER7 or nested KVM) did not and instead reused existing iommu_table structs. This means 1) no DDW 2) ownership transfer is done directly in the VFIO SPAPR TCE driver. Soon POWER is going to get its own iommu_ops and ownership control is going to move there. This implements spapr_tce_table_group_ops which borrows iommu_table tables. The upside is that VFIO needs to know less about POWER. The new ops returns the existing table from create_table() and only checks if the same window is already set. This is only going to work if the default DMA window starts table_group.tce32_start and as big as pe->table_group.tce32_size (not the case for IODA2+ PowerNV). This changes iommu_table_group_ops::take_ownership() to return an error if borrowing a table failed. This should not cause any visible change in behavior for PowerNV. pSeries was not that well tested/supported anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> [mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com
2023-03-07 01:30:20 +08:00
/* v2 requires full support of dynamic DMA windows */
if (container->v2 && table_group->max_dynamic_windows_supported == 0) {
ret = -EINVAL;
goto unlock_exit;
}
/* v1 reuses TCE tables and does not share them among PEs */
if (!container->v2 && tce_groups_attached(container)) {
ret = -EBUSY;
goto unlock_exit;
}
/*
* Check if new group has the same iommu_table_group_ops
* (i.e. compatible)
*/
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
list_for_each_entry(tcegrp, &container->group_list, next) {
struct iommu_table_group *table_group_tmp;
if (tcegrp->grp == iommu_group) {
pr_warn("tce_vfio: Group %d is already attached\n",
iommu_group_id(iommu_group));
ret = -EBUSY;
goto unlock_exit;
}
table_group_tmp = iommu_group_get_iommudata(tcegrp->grp);
if (table_group_tmp->ops->create_table !=
table_group->ops->create_table) {
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
pr_warn("tce_vfio: Group %d is incompatible with group %d\n",
iommu_group_id(iommu_group),
iommu_group_id(tcegrp->grp));
ret = -EPERM;
goto unlock_exit;
}
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
tcegrp = kzalloc(sizeof(*tcegrp), GFP_KERNEL);
if (!tcegrp) {
ret = -ENOMEM;
goto unlock_exit;
}
powerpc/iommu: Add "borrowing" iommu_table_group_ops PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows for PEs: control the ownership, create/set/unset a table the hardware for dynamic DMA windows (DDW). VFIO uses the API to implement support on POWER. So far only PowerNV IODA2 (POWER8 and newer machines) implemented this and other cases (POWER7 or nested KVM) did not and instead reused existing iommu_table structs. This means 1) no DDW 2) ownership transfer is done directly in the VFIO SPAPR TCE driver. Soon POWER is going to get its own iommu_ops and ownership control is going to move there. This implements spapr_tce_table_group_ops which borrows iommu_table tables. The upside is that VFIO needs to know less about POWER. The new ops returns the existing table from create_table() and only checks if the same window is already set. This is only going to work if the default DMA window starts table_group.tce32_start and as big as pe->table_group.tce32_size (not the case for IODA2+ PowerNV). This changes iommu_table_group_ops::take_ownership() to return an error if borrowing a table failed. This should not cause any visible change in behavior for PowerNV. pSeries was not that well tested/supported anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> [mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com
2023-03-07 01:30:20 +08:00
ret = tce_iommu_take_ownership(container, table_group);
if (!tce_groups_attached(container) && !container->tables[0])
container->def_window_pending = true;
vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:10 +08:00
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (!ret) {
tcegrp->grp = iommu_group;
list_add(&tcegrp->next, &container->group_list);
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (ret && tcegrp)
kfree(tcegrp);
unlock_exit:
mutex_unlock(&container->lock);
return ret;
}
static void tce_iommu_detach_group(void *iommu_data,
struct iommu_group *iommu_group)
{
struct tce_container *container = iommu_data;
struct iommu_table_group *table_group;
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
bool found = false;
struct tce_iommu_group *tcegrp;
mutex_lock(&container->lock);
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
list_for_each_entry(tcegrp, &container->group_list, next) {
if (tcegrp->grp == iommu_group) {
found = true;
break;
}
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
if (!found) {
pr_warn("tce_vfio: detaching unattached group #%u\n",
iommu_group_id(iommu_group));
goto unlock_exit;
}
vfio: powerpc/spapr: Register memory and define IOMMU v2 The existing implementation accounts the whole DMA window in the locked_vm counter. This is going to be worse with multiple containers and huge DMA windows. Also, real-time accounting would requite additional tracking of accounted pages due to the page size difference - IOMMU uses 4K pages and system uses 4K or 64K pages. Another issue is that actual pages pinning/unpinning happens on every DMA map/unmap request. This does not affect the performance much now as we spend way too much time now on switching context between guest/userspace/host but this will start to matter when we add in-kernel DMA map/unmap acceleration. This introduces a new IOMMU type for SPAPR - VFIO_SPAPR_TCE_v2_IOMMU. New IOMMU deprecates VFIO_IOMMU_ENABLE/VFIO_IOMMU_DISABLE and introduces 2 new ioctls to register/unregister DMA memory - VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - which receive user space address and size of a memory region which needs to be pinned/unpinned and counted in locked_vm. New IOMMU splits physical pages pinning and TCE table update into 2 different operations. It requires: 1) guest pages to be registered first 2) consequent map/unmap requests to work only with pre-registered memory. For the default single window case this means that the entire guest (instead of 2GB) needs to be pinned before using VFIO. When a huge DMA window is added, no additional pinning will be required, otherwise it would be guest RAM + 2GB. The new memory registration ioctls are not supported by VFIO_SPAPR_TCE_IOMMU. Dynamic DMA window and in-kernel acceleration will require memory to be preregistered in order to work. The accounting is done per the user process. This advertises v2 SPAPR TCE IOMMU and restricts what the userspace can do with v1 or v2 IOMMUs. In order to support memory pre-registration, we need a way to track the use of every registered memory region and only allow unregistration if a region is not in use anymore. So we need a way to tell from what region the just cleared TCE was from. This adds a userspace view of the TCE table into iommu_table struct. It contains userspace address, one per TCE entry. The table is only allocated when the ownership over an IOMMU group is taken which means it is only used from outside of the powernv code (such as VFIO). As v2 IOMMU supports IODA2 and pre-IODA2 IOMMUs (which do not support DDW API), this creates a default DMA window for IODA2 for consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:25 +08:00
list_del(&tcegrp->next);
kfree(tcegrp);
table_group = iommu_group_get_iommudata(iommu_group);
BUG_ON(!table_group);
powerpc/iommu: Add "borrowing" iommu_table_group_ops PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows for PEs: control the ownership, create/set/unset a table the hardware for dynamic DMA windows (DDW). VFIO uses the API to implement support on POWER. So far only PowerNV IODA2 (POWER8 and newer machines) implemented this and other cases (POWER7 or nested KVM) did not and instead reused existing iommu_table structs. This means 1) no DDW 2) ownership transfer is done directly in the VFIO SPAPR TCE driver. Soon POWER is going to get its own iommu_ops and ownership control is going to move there. This implements spapr_tce_table_group_ops which borrows iommu_table tables. The upside is that VFIO needs to know less about POWER. The new ops returns the existing table from create_table() and only checks if the same window is already set. This is only going to work if the default DMA window starts table_group.tce32_start and as big as pe->table_group.tce32_size (not the case for IODA2+ PowerNV). This changes iommu_table_group_ops::take_ownership() to return an error if borrowing a table failed. This should not cause any visible change in behavior for PowerNV. pSeries was not that well tested/supported anyway. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> [mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com
2023-03-07 01:30:20 +08:00
tce_iommu_release_ownership(container, table_group);
unlock_exit:
mutex_unlock(&container->lock);
}
static const struct vfio_iommu_driver_ops tce_iommu_driver_ops = {
.name = "iommu-vfio-powerpc",
.owner = THIS_MODULE,
.open = tce_iommu_open,
.release = tce_iommu_release,
.ioctl = tce_iommu_ioctl,
.attach_group = tce_iommu_attach_group,
.detach_group = tce_iommu_detach_group,
};
static int __init tce_iommu_init(void)
{
return vfio_register_iommu_driver(&tce_iommu_driver_ops);
}
static void __exit tce_iommu_cleanup(void)
{
vfio_unregister_iommu_driver(&tce_iommu_driver_ops);
}
module_init(tce_iommu_init);
module_exit(tce_iommu_cleanup);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);