OpenCloudOS-Kernel/include/scsi/scsi_device.h

539 lines
20 KiB
C
Raw Normal View History

#ifndef _SCSI_SCSI_DEVICE_H
#define _SCSI_SCSI_DEVICE_H
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/blkdev.h>
#include <scsi/scsi.h>
#include <linux/atomic.h>
struct device;
struct request_queue;
struct scsi_cmnd;
struct scsi_lun;
struct scsi_sense_hdr;
struct scsi_mode_data {
__u32 length;
__u16 block_descriptor_length;
__u8 medium_type;
__u8 device_specific;
__u8 header_length;
__u8 longlba:1;
};
/*
* sdev state: If you alter this, you also need to alter scsi_sysfs.c
* (for the ascii descriptions) and the state model enforcer:
* scsi_lib:scsi_device_set_state().
*/
enum scsi_device_state {
SDEV_CREATED = 1, /* device created but not added to sysfs
* Only internal commands allowed (for inq) */
SDEV_RUNNING, /* device properly configured
* All commands allowed */
SDEV_CANCEL, /* beginning to delete device
* Only error handler commands allowed */
SDEV_DEL, /* device deleted
* no commands allowed */
SDEV_QUIESCE, /* Device quiescent. No block commands
* will be accepted, only specials (which
* originate in the mid-layer) */
SDEV_OFFLINE, /* Device offlined (by error handling or
* user request */
SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
SDEV_BLOCK, /* Device blocked by scsi lld. No
* scsi commands from user or midlayer
* should be issued to the scsi
* lld. */
SDEV_CREATED_BLOCK, /* same as above but for created devices */
};
enum scsi_device_event {
SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */
SDEV_EVT_INQUIRY_CHANGE_REPORTED, /* 3F 03 UA reported */
SDEV_EVT_CAPACITY_CHANGE_REPORTED, /* 2A 09 UA reported */
SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED, /* 38 07 UA reported */
SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED, /* 2A 01 UA reported */
SDEV_EVT_LUN_CHANGE_REPORTED, /* 3F 0E UA reported */
SDEV_EVT_FIRST = SDEV_EVT_MEDIA_CHANGE,
SDEV_EVT_LAST = SDEV_EVT_LUN_CHANGE_REPORTED,
SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1
};
struct scsi_event {
enum scsi_device_event evt_type;
struct list_head node;
/* put union of data structures, for non-simple event types,
* here
*/
};
struct scsi_device {
struct Scsi_Host *host;
struct request_queue *request_queue;
/* the next two are protected by the host->host_lock */
struct list_head siblings; /* list of all devices on this host */
struct list_head same_target_siblings; /* just the devices sharing same target id */
atomic_t device_busy; /* commands actually active on LLDD */
atomic_t device_blocked; /* Device returned QUEUE_FULL. */
spinlock_t list_lock;
struct list_head cmd_list; /* queue of in use SCSI Command structures */
struct list_head starved_entry;
struct scsi_cmnd *current_cmnd; /* currently active command */
unsigned short queue_depth; /* How deep of a queue we want */
[SCSI] add queue_depth ramp up code Current FC HBA queue_depth ramp up code depends on last queue full time. The sdev already has last_queue_full_time field to track last queue full time but stored value is truncated by last four bits. So this patch updates last_queue_full_time without truncating last 4 bits to store full value and then updates its only current usages in scsi_track_queue_full to ignore last four bits to keep current usages same while also use this field in added ramp up code. Adds scsi_handle_queue_ramp_up to ramp up queue_depth on successful completion of IO. The scsi_handle_queue_ramp_up will do ramp up on all luns of a target, just same as ramp down done on all luns on a target. The ramp up is skipped in case the change_queue_depth is not supported by LLD or already reached to added max_queue_depth. Updates added max_queue_depth on every new update to default queue_depth value. The ramp up is also skipped if lapsed time since either last queue ramp up or down is less than LLD specified queue_ramp_up_period. Adds queue_ramp_up_period to sysfs but only if change_queue_depth is supported since ramp up and queue_ramp_up_period is needed only in case change_queue_depth is supported first. Initializes queue_ramp_up_period to 120HZ jiffies as initial default value, it is same as used in existing lpfc and qla2xxx. -v2 Combined all ramp code into this single patch. -v3 Moves max_queue_depth initialization after slave_configure is called from after slave_alloc calling done. Also adjusted max_queue_depth check to skip ramp up if current queue_depth is >= max_queue_depth. -v4 Changes sdev->queue_ramp_up_period unit to ms when using sysfs i/f to store or show its value. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com> Tested-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-23 06:46:33 +08:00
unsigned short max_queue_depth; /* max queue depth */
unsigned short last_queue_full_depth; /* These two are used by */
unsigned short last_queue_full_count; /* scsi_track_queue_full() */
[SCSI] add queue_depth ramp up code Current FC HBA queue_depth ramp up code depends on last queue full time. The sdev already has last_queue_full_time field to track last queue full time but stored value is truncated by last four bits. So this patch updates last_queue_full_time without truncating last 4 bits to store full value and then updates its only current usages in scsi_track_queue_full to ignore last four bits to keep current usages same while also use this field in added ramp up code. Adds scsi_handle_queue_ramp_up to ramp up queue_depth on successful completion of IO. The scsi_handle_queue_ramp_up will do ramp up on all luns of a target, just same as ramp down done on all luns on a target. The ramp up is skipped in case the change_queue_depth is not supported by LLD or already reached to added max_queue_depth. Updates added max_queue_depth on every new update to default queue_depth value. The ramp up is also skipped if lapsed time since either last queue ramp up or down is less than LLD specified queue_ramp_up_period. Adds queue_ramp_up_period to sysfs but only if change_queue_depth is supported since ramp up and queue_ramp_up_period is needed only in case change_queue_depth is supported first. Initializes queue_ramp_up_period to 120HZ jiffies as initial default value, it is same as used in existing lpfc and qla2xxx. -v2 Combined all ramp code into this single patch. -v3 Moves max_queue_depth initialization after slave_configure is called from after slave_alloc calling done. Also adjusted max_queue_depth check to skip ramp up if current queue_depth is >= max_queue_depth. -v4 Changes sdev->queue_ramp_up_period unit to ms when using sysfs i/f to store or show its value. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com> Tested-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-23 06:46:33 +08:00
unsigned long last_queue_full_time; /* last queue full time */
unsigned long queue_ramp_up_period; /* ramp up period in jiffies */
#define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ)
unsigned long last_queue_ramp_up; /* last queue ramp up time */
unsigned int id, channel;
u64 lun;
unsigned int manufacturer; /* Manufacturer of device, for using
* vendor-specific cmd's */
unsigned sector_size; /* size in bytes */
void *hostdata; /* available to low-level driver */
char type;
char scsi_level;
char inq_periph_qual; /* PQ from INQUIRY data */
unsigned char inquiry_len; /* valid bytes in 'inquiry' */
unsigned char * inquiry; /* INQUIRY response data */
const char * vendor; /* [back_compat] point into 'inquiry' ... */
const char * model; /* ... after scan; point to static string */
const char * rev; /* ... "nullnullnullnull" before scan */
#define SCSI_VPD_PG_LEN 255
int vpd_pg83_len;
unsigned char *vpd_pg83;
int vpd_pg80_len;
unsigned char *vpd_pg80;
unsigned char current_tag; /* current tag */
struct scsi_target *sdev_target; /* used only for single_lun */
unsigned int sdev_bflags; /* black/white flags as also found in
* scsi_devinfo.[hc]. For now used only to
* pass settings from slave_alloc to scsi
* core. */
unsigned int eh_timeout; /* Error handling timeout */
unsigned removable:1;
unsigned changed:1; /* Data invalid due to media change */
unsigned busy:1; /* Used to prevent races */
unsigned lockable:1; /* Able to prevent media removal */
unsigned locked:1; /* Media removal disabled */
unsigned borken:1; /* Tell the Seagate driver to be
* painfully slow on this device */
unsigned disconnect:1; /* can disconnect */
unsigned soft_reset:1; /* Uses soft reset option */
unsigned sdtr:1; /* Device supports SDTR messages */
unsigned wdtr:1; /* Device supports WDTR messages */
unsigned ppr:1; /* Device supports PPR messages */
unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */
unsigned simple_tags:1; /* simple queue tag messages are enabled */
unsigned was_reset:1; /* There was a bus reset on the bus for
* this device */
unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
* because we did a bus reset. */
unsigned use_10_for_rw:1; /* first try 10-byte read / write */
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */
unsigned no_write_same:1; /* no WRITE SAME command */
unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
unsigned skip_vpd_pages:1; /* do not read VPD pages */
unsigned try_vpd_pages:1; /* attempt to read VPD pages */
unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
unsigned no_start_on_add:1; /* do not issue start on add */
unsigned allow_restart:1; /* issue START_UNIT in error handler */
unsigned manage_start_stop:1; /* Let HLD (sd) manage start/stop */
unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
unsigned select_no_atn:1;
unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */
unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
unsigned last_sector_bug:1; /* do not use multisector accesses on
SD_LAST_BUGGY_SECTORS */
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
scsi/sd: add a no_read_capacity_16 scsi_device flag I seem to have a knack for digging up buggy usb devices which don't work with Linux, and I'm crazy enough to try to make them work. So this time a friend of mine asked me to get an mp4 player (an mp3 player which can play videos on a small screen) to work with Linux. It is based on the well known rockbox chipset for which we already have an unusual devs entries to work around some of its bugs. But this model comes with an additional twist. This model chokes on read_capacity_16 calls. Now normally we don't make those calls, but this model comes with an sdcard slot and when there is no card in there (and shipped from the factory there is none), it reports a size of 0. However this time the programmers actually got the read_capacity_10 response right! So they substract one from the size as stored internally in the mp3 player before reporting it back, resulting in an answer of ... 0xffffffff sectors, causing sd.c to try a read_capacity_16, on which the device crashes. This patch adds a flag to scsi_device to indicate that a a device cannot handle read_capacity_16, and when this flag is set if a device reports an lba of 0xffffffff as answer to a read_capacity_10, assumes it tries to report a size of 0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-02 05:20:10 +08:00
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
unsigned is_visible:1; /* is the device visible in sysfs */
unsigned wce_default_on:1; /* Cache is ON by default */
unsigned no_dif:1; /* T10 PI (DIF) should be disabled */
unsigned broken_fua:1; /* Don't set FUA bit */
scsi: don't store LUN bits in CDB[1] for USB mass-storage devices The SCSI specification requires that the second Command Data Byte should contain the LUN value in its high-order bits if the recipient device reports SCSI level 2 or below. Nevertheless, some USB mass-storage devices use those bits for other purposes in vendor-specific commands. Currently Linux has no way to send such commands, because the SCSI stack always overwrites the LUN bits. Testing shows that Windows 7 and XP do not store the LUN bits in the CDB when sending commands to a USB device. This doesn't matter if the device uses the Bulk-Only or UAS transports (which virtually all modern USB mass-storage devices do), as these have a separate mechanism for sending the LUN value. Therefore this patch introduces a flag in the Scsi_Host structure to inform the SCSI midlayer that a transport does not require the LUN bits to be stored in the CDB, and it makes usb-storage set this flag for all devices using the Bulk-Only transport. (UAS is handled by a separate driver, but it doesn't really matter because no SCSI-2 or lower device is at all likely to use UAS.) The patch also cleans up the code responsible for storing the LUN value by adding a bitflag to the scsi_device structure. The test for whether to stick the LUN value in the CDB can be made when the device is probed, and stored for future use rather than being made over and over in the fast path. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Tiziano Bacocco <tiziano.bacocco@gmail.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-02 23:35:50 +08:00
unsigned lun_in_cdb:1; /* Store LUN bits in CDB[1] */
atomic_t disk_events_disable_depth; /* disable depth for disk events */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
struct list_head event_list; /* asserted events */
struct work_struct event_work;
unsigned int max_device_blocked; /* what device_blocked counts down from */
#define SCSI_DEFAULT_DEVICE_BLOCKED 3
atomic_t iorequest_cnt;
atomic_t iodone_cnt;
atomic_t ioerr_cnt;
struct device sdev_gendev,
sdev_dev;
struct execute_work ew; /* used to get process context on put */
struct work_struct requeue_work;
struct scsi_dh_data *scsi_dh_data;
enum scsi_device_state sdev_state;
unsigned long sdev_data[0];
} __attribute__((aligned(sizeof(unsigned long))));
typedef void (*activate_complete)(void *, int);
struct scsi_device_handler {
/* Used by the infrastructure */
struct list_head list; /* list of scsi_device_handlers */
/* Filled by the hardware handler */
struct module *module;
const char *name;
int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
struct scsi_dh_data *(*attach)(struct scsi_device *);
void (*detach)(struct scsi_device *);
int (*activate)(struct scsi_device *, activate_complete, void *);
int (*prep_fn)(struct scsi_device *, struct request *);
int (*set_params)(struct scsi_device *, const char *);
bool (*match)(struct scsi_device *);
};
struct scsi_dh_data {
struct scsi_device_handler *scsi_dh;
struct scsi_device *sdev;
struct kref kref;
};
#define to_scsi_device(d) \
container_of(d, struct scsi_device, sdev_gendev)
#define class_to_sdev(d) \
container_of(d, struct scsi_device, sdev_dev)
#define transport_class_to_sdev(class_dev) \
to_scsi_device(class_dev->parent)
#define sdev_dbg(sdev, fmt, a...) \
dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
/*
* like scmd_printk, but the device name is passed in
* as a string pointer
*/
extern int sdev_prefix_printk(const char *, const struct scsi_device *,
const char *, const char *, ...);
#define sdev_printk(l, sdev, fmt, a...) \
sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
extern int scmd_printk(const char *, const struct scsi_cmnd *,
const char *, ...);
#define scmd_dbg(scmd, fmt, a...) \
do { \
if ((scmd)->request->rq_disk) \
sdev_dbg((scmd)->device, "[%s] " fmt, \
(scmd)->request->rq_disk->disk_name, ##a);\
else \
sdev_dbg((scmd)->device, fmt, ##a); \
} while (0)
enum scsi_target_state {
STARGET_CREATED = 1,
STARGET_RUNNING,
STARGET_DEL,
};
/*
* scsi_target: representation of a scsi target, for now, this is only
* used for single_lun devices. If no one has active IO to the target,
* starget_sdev_user is NULL, else it points to the active sdev.
*/
struct scsi_target {
struct scsi_device *starget_sdev_user;
struct list_head siblings;
struct list_head devices;
struct device dev;
struct kref reap_ref; /* last put renders target invisible */
unsigned int channel;
unsigned int id; /* target id ... replace
* scsi_device.id eventually */
unsigned int create:1; /* signal that it needs to be added */
unsigned int single_lun:1; /* Indicates we should only
* allow I/O to one of the luns
* for the device at a time. */
unsigned int pdt_1f_for_no_lun:1; /* PDT = 0x1f
* means no lun present. */
unsigned int no_report_luns:1; /* Don't use
* REPORT LUNS for scanning. */
unsigned int expecting_lun_change:1; /* A device has reported
* a 3F/0E UA, other devices on
* the same target will also. */
/* commands actually active on LLD. */
atomic_t target_busy;
atomic_t target_blocked;
[SCSI] Add helper code so transport classes/driver can control queueing (v3) SCSI-ml manages the queueing limits for the device and host, but does not do so at the target level. However something something similar can come in userful when a driver is transitioning a transport object to the the blocked state, becuase at that time we do not want to queue io and we do not want the queuecommand to be called again. The patch adds code similar to the exisiting SCSI_ML_*BUSY handlers. You can now return SCSI_MLQUEUE_TARGET_BUSY when we hit a transport level queueing issue like the hw cannot allocate some resource at the iscsi session/connection level, or the target has temporarily closed or shrunk the queueing window, or if we are transitioning to the blocked state. bnx2i, when they rework their firmware according to netdev developers requests, will also need to be able to limit queueing at this level. bnx2i will hook into libiscsi, but will allocate a scsi host per netdevice/hba, so unlike pure software iscsi/iser which is allocating a host per session, it cannot set the scsi_host->can_queue and return SCSI_MLQUEUE_HOST_BUSY to reflect queueing limits on the transport. The iscsi class/driver can also set a scsi_target->can_queue value which reflects the max commands the driver/class can support. For iscsi this reflects the number of commands we can support for each session due to session/connection hw limits, driver limits, and to also reflect the session/targets's queueing window. Changes: v1 - initial patch. v2 - Fix scsi_run_queue handling of multiple blocked targets. Previously we would break from the main loop if a device was added back on the starved list. We now run over the list and check if any target is blocked. v3 - Rediff for scsi-misc. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-18 04:24:38 +08:00
/*
* LLDs should set this in the slave_alloc host template callout.
* If set to zero then there is not limit.
*/
unsigned int can_queue;
unsigned int max_target_blocked;
#define SCSI_DEFAULT_TARGET_BLOCKED 3
char scsi_level;
enum scsi_target_state state;
void *hostdata; /* available to low-level driver */
unsigned long starget_data[0]; /* for the transport */
/* starget_data must be the last element!!!! */
} __attribute__((aligned(sizeof(unsigned long))));
#define to_scsi_target(d) container_of(d, struct scsi_target, dev)
static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
{
return to_scsi_target(sdev->sdev_gendev.parent);
}
#define transport_class_to_starget(class_dev) \
to_scsi_target(class_dev->parent)
#define starget_printk(prefix, starget, fmt, a...) \
dev_printk(prefix, &(starget)->dev, fmt, ##a)
extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
uint, uint, u64, void *hostdata);
extern int scsi_add_device(struct Scsi_Host *host, uint channel,
uint target, u64 lun);
extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
extern void scsi_remove_device(struct scsi_device *);
extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
void scsi_attach_vpd(struct scsi_device *sdev);
extern int scsi_device_get(struct scsi_device *);
extern void scsi_device_put(struct scsi_device *);
extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
uint, uint, u64);
extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
uint, uint, u64);
extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
u64);
extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
u64);
extern void starget_for_each_device(struct scsi_target *, void *,
void (*fn)(struct scsi_device *, void *));
extern void __starget_for_each_device(struct scsi_target *, void *,
void (*fn)(struct scsi_device *,
void *));
/* only exposed to implement shost_for_each_device */
extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
struct scsi_device *);
/**
* shost_for_each_device - iterate over all devices of a host
* @sdev: the &struct scsi_device to use as a cursor
* @shost: the &struct scsi_host to iterate over
*
* Iterator that returns each device attached to @shost. This loop
* takes a reference on each device and releases it at the end. If
* you break out of the loop, you must call scsi_device_put(sdev).
*/
#define shost_for_each_device(sdev, shost) \
for ((sdev) = __scsi_iterate_devices((shost), NULL); \
(sdev); \
(sdev) = __scsi_iterate_devices((shost), (sdev)))
/**
* __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
* @sdev: the &struct scsi_device to use as a cursor
* @shost: the &struct scsi_host to iterate over
*
* Iterator that returns each device attached to @shost. It does _not_
* take a reference on the scsi_device, so the whole loop must be
* protected by shost->host_lock.
*
* Note: The only reason to use this is because you need to access the
* device list in interrupt context. Otherwise you really want to use
* shost_for_each_device instead.
*/
#define __shost_for_each_device(sdev, shost) \
list_for_each_entry((sdev), &((shost)->__devices), siblings)
extern int scsi_change_queue_depth(struct scsi_device *, int);
extern int scsi_track_queue_full(struct scsi_device *, int);
extern int scsi_set_medium_removal(struct scsi_device *, char);
extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
unsigned char *buffer, int len, int timeout,
int retries, struct scsi_mode_data *data,
struct scsi_sense_hdr *);
extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
int modepage, unsigned char *buffer, int len,
int timeout, int retries,
struct scsi_mode_data *data,
struct scsi_sense_hdr *);
extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
int retries, struct scsi_sense_hdr *sshdr);
extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
int buf_len);
extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
unsigned int len, unsigned char opcode);
extern int scsi_device_set_state(struct scsi_device *sdev,
enum scsi_device_state state);
extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
gfp_t gfpflags);
extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
extern void sdev_evt_send_simple(struct scsi_device *sdev,
enum scsi_device_event evt_type, gfp_t gfpflags);
extern int scsi_device_quiesce(struct scsi_device *sdev);
extern void scsi_device_resume(struct scsi_device *sdev);
extern void scsi_target_quiesce(struct scsi_target *);
extern void scsi_target_resume(struct scsi_target *);
extern void scsi_scan_target(struct device *parent, unsigned int channel,
unsigned int id, u64 lun, int rescan);
extern void scsi_target_reap(struct scsi_target *);
extern void scsi_target_block(struct device *);
extern void scsi_target_unblock(struct device *, enum scsi_device_state);
extern void scsi_remove_target(struct device *);
extern void int_to_scsilun(u64, struct scsi_lun *);
extern u64 scsilun_to_int(struct scsi_lun *);
extern const char *scsi_device_state_name(enum scsi_device_state);
extern int scsi_is_sdev_device(const struct device *);
extern int scsi_is_target_device(const struct device *);
extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
int data_direction, void *buffer, unsigned bufflen,
unsigned char *sense, int timeout, int retries,
u64 flags, int *resid);
extern int scsi_execute_req_flags(struct scsi_device *sdev,
const unsigned char *cmd, int data_direction, void *buffer,
unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
int retries, int *resid, u64 flags);
static inline int scsi_execute_req(struct scsi_device *sdev,
const unsigned char *cmd, int data_direction, void *buffer,
unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
int retries, int *resid)
{
return scsi_execute_req_flags(sdev, cmd, data_direction, buffer,
bufflen, sshdr, timeout, retries, resid, 0);
}
extern void sdev_disable_disk_events(struct scsi_device *sdev);
extern void sdev_enable_disk_events(struct scsi_device *sdev);
#ifdef CONFIG_PM
[SCSI] implement runtime Power Management This patch (as1398b) adds runtime PM support to the SCSI layer. Only the machanism is provided; use of it is up to the various high-level drivers, and the patch doesn't change any of them. Except for sg -- the patch expicitly prevents a device from being runtime-suspended while its sg device file is open. The implementation is simplistic. In general, hosts and targets are automatically suspended when all their children are asleep, but for them the runtime-suspend code doesn't actually do anything. (A host's runtime PM status is propagated up the device tree, though, so a runtime-PM-aware lower-level driver could power down the host adapter hardware at the appropriate times.) There are comments indicating where a transport class might be notified or some other hooks added. LUNs are runtime-suspended by calling the drivers' existing suspend handlers (and likewise for runtime-resume). Somewhat arbitrarily, the implementation delays for 100 ms before suspending an eligible LUN. This is because there typically are occasions during bootup when the same device file is opened and closed several times in quick succession. The way this all works is that the SCSI core increments a device's PM-usage count when it is registered. If a high-level driver does nothing then the device will not be eligible for runtime-suspend because of the elevated usage count. If a high-level driver wants to use runtime PM then it can call scsi_autopm_put_device() in its probe routine to decrement the usage count and scsi_autopm_get_device() in its remove routine to restore the original count. Hosts, targets, and LUNs are not suspended while they are being probed or removed, or while the error handler is running. In fact, a fairly large part of the patch consists of code to make sure that things aren't suspended at such times. [jejb: fix up compile issues in PM config variations] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-17 22:41:42 +08:00
extern int scsi_autopm_get_device(struct scsi_device *);
extern void scsi_autopm_put_device(struct scsi_device *);
#else
static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
static inline void scsi_autopm_put_device(struct scsi_device *d) {}
#endif /* CONFIG_PM */
[SCSI] implement runtime Power Management This patch (as1398b) adds runtime PM support to the SCSI layer. Only the machanism is provided; use of it is up to the various high-level drivers, and the patch doesn't change any of them. Except for sg -- the patch expicitly prevents a device from being runtime-suspended while its sg device file is open. The implementation is simplistic. In general, hosts and targets are automatically suspended when all their children are asleep, but for them the runtime-suspend code doesn't actually do anything. (A host's runtime PM status is propagated up the device tree, though, so a runtime-PM-aware lower-level driver could power down the host adapter hardware at the appropriate times.) There are comments indicating where a transport class might be notified or some other hooks added. LUNs are runtime-suspended by calling the drivers' existing suspend handlers (and likewise for runtime-resume). Somewhat arbitrarily, the implementation delays for 100 ms before suspending an eligible LUN. This is because there typically are occasions during bootup when the same device file is opened and closed several times in quick succession. The way this all works is that the SCSI core increments a device's PM-usage count when it is registered. If a high-level driver does nothing then the device will not be eligible for runtime-suspend because of the elevated usage count. If a high-level driver wants to use runtime PM then it can call scsi_autopm_put_device() in its probe routine to decrement the usage count and scsi_autopm_get_device() in its remove routine to restore the original count. Hosts, targets, and LUNs are not suspended while they are being probed or removed, or while the error handler is running. In fact, a fairly large part of the patch consists of code to make sure that things aren't suspended at such times. [jejb: fix up compile issues in PM config variations] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-17 22:41:42 +08:00
static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
{
return device_reprobe(&sdev->sdev_gendev);
}
static inline unsigned int sdev_channel(struct scsi_device *sdev)
{
return sdev->channel;
}
static inline unsigned int sdev_id(struct scsi_device *sdev)
{
return sdev->id;
}
#define scmd_id(scmd) sdev_id((scmd)->device)
#define scmd_channel(scmd) sdev_channel((scmd)->device)
/*
* checks for positions of the SCSI state machine
*/
static inline int scsi_device_online(struct scsi_device *sdev)
{
return (sdev->sdev_state != SDEV_OFFLINE &&
sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
sdev->sdev_state != SDEV_DEL);
}
static inline int scsi_device_blocked(struct scsi_device *sdev)
{
return sdev->sdev_state == SDEV_BLOCK ||
sdev->sdev_state == SDEV_CREATED_BLOCK;
}
static inline int scsi_device_created(struct scsi_device *sdev)
{
return sdev->sdev_state == SDEV_CREATED ||
sdev->sdev_state == SDEV_CREATED_BLOCK;
}
/* accessor functions for the SCSI parameters */
static inline int scsi_device_sync(struct scsi_device *sdev)
{
return sdev->sdtr;
}
static inline int scsi_device_wide(struct scsi_device *sdev)
{
return sdev->wdtr;
}
static inline int scsi_device_dt(struct scsi_device *sdev)
{
return sdev->ppr;
}
static inline int scsi_device_dt_only(struct scsi_device *sdev)
{
if (sdev->inquiry_len < 57)
return 0;
return (sdev->inquiry[56] & 0x0c) == 0x04;
}
static inline int scsi_device_ius(struct scsi_device *sdev)
{
if (sdev->inquiry_len < 57)
return 0;
return sdev->inquiry[56] & 0x01;
}
static inline int scsi_device_qas(struct scsi_device *sdev)
{
if (sdev->inquiry_len < 57)
return 0;
return sdev->inquiry[56] & 0x02;
}
static inline int scsi_device_enclosure(struct scsi_device *sdev)
{
return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
}
[SCSI] modalias for scsi devices The following patch adds support for sysfs/uevent modalias attribute for scsi devices (like disks, tapes, cdroms etc), based on whatever current sd.c, sr.c, st.c and osst.c drivers supports. The modalias format is like this: scsi:type-0x04 (for TYPE_WORM, handled by sr.c now). Several comments. o This hexadecimal type value is because all TYPE_XXX constants in include/scsi/scsi.h are given in hex, but __stringify() will not convert them to decimal (so it will NOT be scsi:type-4). Since it does not really matter in which format it is, while both modalias in module and modalias attribute match each other, I descided to go for that 0x%02x format (and added a comment in include/scsi/scsi.h to keep them that way), instead of changing them all to decimal. o There was no .uevent routine for SCSI bus. It might be a good idea to add some more ueven environment variables in there. o osst.c driver handles tapes too, like st.c, but only SOME tapes. With this setup, hotplug scripts (or whatever is used by the user) will try to load both st and osst modules for all SCSI tapes found, because both modules have scsi:type-0x01 alias). It is not harmful, but one extra module is no good either. It is possible to solve this, by exporting more info in modalias attribute, including vendor and device identification strings, so that modalias becomes something like scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive and having that, match for all 3 attributes, not only device type. But oh well, vendor and device strings may be large, and they do contain spaces and whatnot. So I left them for now, awaiting for comments first. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-27 20:02:37 +08:00
static inline int scsi_device_protection(struct scsi_device *sdev)
{
if (sdev->no_dif)
return 0;
return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
}
static inline int scsi_device_tpgs(struct scsi_device *sdev)
{
return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
}
[SCSI] modalias for scsi devices The following patch adds support for sysfs/uevent modalias attribute for scsi devices (like disks, tapes, cdroms etc), based on whatever current sd.c, sr.c, st.c and osst.c drivers supports. The modalias format is like this: scsi:type-0x04 (for TYPE_WORM, handled by sr.c now). Several comments. o This hexadecimal type value is because all TYPE_XXX constants in include/scsi/scsi.h are given in hex, but __stringify() will not convert them to decimal (so it will NOT be scsi:type-4). Since it does not really matter in which format it is, while both modalias in module and modalias attribute match each other, I descided to go for that 0x%02x format (and added a comment in include/scsi/scsi.h to keep them that way), instead of changing them all to decimal. o There was no .uevent routine for SCSI bus. It might be a good idea to add some more ueven environment variables in there. o osst.c driver handles tapes too, like st.c, but only SOME tapes. With this setup, hotplug scripts (or whatever is used by the user) will try to load both st and osst modules for all SCSI tapes found, because both modules have scsi:type-0x01 alias). It is not harmful, but one extra module is no good either. It is possible to solve this, by exporting more info in modalias attribute, including vendor and device identification strings, so that modalias becomes something like scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive and having that, match for all 3 attributes, not only device type. But oh well, vendor and device strings may be large, and they do contain spaces and whatnot. So I left them for now, awaiting for comments first. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-27 20:02:37 +08:00
#define MODULE_ALIAS_SCSI_DEVICE(type) \
MODULE_ALIAS("scsi:t-" __stringify(type) "*")
#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
#endif /* _SCSI_SCSI_DEVICE_H */