OpenCloudOS-Kernel/drivers/iommu/arm-smmu-v3.c

3708 lines
97 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* IOMMU API for ARM architected SMMUv3 implementations.
*
* Copyright (C) 2015 ARM Limited
*
* Author: Will Deacon <will.deacon@arm.com>
*
* This driver is powered by bad coffee and bombay mix.
*/
#include <linux/acpi.h>
#include <linux/acpi_iort.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/crash_dump.h>
#include <linux/delay.h>
#include <linux/dma-iommu.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io-pgtable.h>
#include <linux/iommu.h>
#include <linux/iopoll.h>
iommu/arm-smmu: Make arm-smmu-v3 explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/iommu/Kconfig:config ARM_SMMU_V3 drivers/iommu/Kconfig: bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, but unlike most drivers, we can't delete the function tied to the ".remove" field. This is because as of commit 7aa8619a66ae ("iommu/arm-smmu-v3: Implement shutdown method") the .remove function was given a one line wrapper and re-used to provide a .shutdown service. So we delete the wrapper and re-name the function from remove to shutdown. We add a moduleparam.h include since the file does actually declare some module parameters, and leaving them as such is the easiest way currently to remain backwards compatible with existing use cases. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-02 03:19:17 +08:00
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/msi.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_iommu.h>
#include <linux/of_platform.h>
#include <linux/pci.h>
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
#include <linux/pci-ats.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
/* MMIO registers */
#define ARM_SMMU_IDR0 0x0
#define IDR0_ST_LVL GENMASK(28, 27)
#define IDR0_ST_LVL_2LVL 1
#define IDR0_STALL_MODEL GENMASK(25, 24)
#define IDR0_STALL_MODEL_STALL 0
#define IDR0_STALL_MODEL_FORCE 2
#define IDR0_TTENDIAN GENMASK(22, 21)
#define IDR0_TTENDIAN_MIXED 0
#define IDR0_TTENDIAN_LE 2
#define IDR0_TTENDIAN_BE 3
#define IDR0_CD2L (1 << 19)
#define IDR0_VMID16 (1 << 18)
#define IDR0_PRI (1 << 16)
#define IDR0_SEV (1 << 14)
#define IDR0_MSI (1 << 13)
#define IDR0_ASID16 (1 << 12)
#define IDR0_ATS (1 << 10)
#define IDR0_HYP (1 << 9)
#define IDR0_COHACC (1 << 4)
#define IDR0_TTF GENMASK(3, 2)
#define IDR0_TTF_AARCH64 2
#define IDR0_TTF_AARCH32_64 3
#define IDR0_S1P (1 << 1)
#define IDR0_S2P (1 << 0)
#define ARM_SMMU_IDR1 0x4
#define IDR1_TABLES_PRESET (1 << 30)
#define IDR1_QUEUES_PRESET (1 << 29)
#define IDR1_REL (1 << 28)
#define IDR1_CMDQS GENMASK(25, 21)
#define IDR1_EVTQS GENMASK(20, 16)
#define IDR1_PRIQS GENMASK(15, 11)
#define IDR1_SSIDSIZE GENMASK(10, 6)
#define IDR1_SIDSIZE GENMASK(5, 0)
#define ARM_SMMU_IDR5 0x14
#define IDR5_STALL_MAX GENMASK(31, 16)
#define IDR5_GRAN64K (1 << 6)
#define IDR5_GRAN16K (1 << 5)
#define IDR5_GRAN4K (1 << 4)
#define IDR5_OAS GENMASK(2, 0)
#define IDR5_OAS_32_BIT 0
#define IDR5_OAS_36_BIT 1
#define IDR5_OAS_40_BIT 2
#define IDR5_OAS_42_BIT 3
#define IDR5_OAS_44_BIT 4
#define IDR5_OAS_48_BIT 5
#define IDR5_OAS_52_BIT 6
#define IDR5_VAX GENMASK(11, 10)
#define IDR5_VAX_52_BIT 1
#define ARM_SMMU_CR0 0x20
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
#define CR0_ATSCHK (1 << 4)
#define CR0_CMDQEN (1 << 3)
#define CR0_EVTQEN (1 << 2)
#define CR0_PRIQEN (1 << 1)
#define CR0_SMMUEN (1 << 0)
#define ARM_SMMU_CR0ACK 0x24
#define ARM_SMMU_CR1 0x28
#define CR1_TABLE_SH GENMASK(11, 10)
#define CR1_TABLE_OC GENMASK(9, 8)
#define CR1_TABLE_IC GENMASK(7, 6)
#define CR1_QUEUE_SH GENMASK(5, 4)
#define CR1_QUEUE_OC GENMASK(3, 2)
#define CR1_QUEUE_IC GENMASK(1, 0)
/* CR1 cacheability fields don't quite follow the usual TCR-style encoding */
#define CR1_CACHE_NC 0
#define CR1_CACHE_WB 1
#define CR1_CACHE_WT 2
#define ARM_SMMU_CR2 0x2c
#define CR2_PTM (1 << 2)
#define CR2_RECINVSID (1 << 1)
#define CR2_E2H (1 << 0)
#define ARM_SMMU_GBPA 0x44
#define GBPA_UPDATE (1 << 31)
#define GBPA_ABORT (1 << 20)
#define ARM_SMMU_IRQ_CTRL 0x50
#define IRQ_CTRL_EVTQ_IRQEN (1 << 2)
#define IRQ_CTRL_PRIQ_IRQEN (1 << 1)
#define IRQ_CTRL_GERROR_IRQEN (1 << 0)
#define ARM_SMMU_IRQ_CTRLACK 0x54
#define ARM_SMMU_GERROR 0x60
#define GERROR_SFM_ERR (1 << 8)
#define GERROR_MSI_GERROR_ABT_ERR (1 << 7)
#define GERROR_MSI_PRIQ_ABT_ERR (1 << 6)
#define GERROR_MSI_EVTQ_ABT_ERR (1 << 5)
#define GERROR_MSI_CMDQ_ABT_ERR (1 << 4)
#define GERROR_PRIQ_ABT_ERR (1 << 3)
#define GERROR_EVTQ_ABT_ERR (1 << 2)
#define GERROR_CMDQ_ERR (1 << 0)
#define GERROR_ERR_MASK 0xfd
#define ARM_SMMU_GERRORN 0x64
#define ARM_SMMU_GERROR_IRQ_CFG0 0x68
#define ARM_SMMU_GERROR_IRQ_CFG1 0x70
#define ARM_SMMU_GERROR_IRQ_CFG2 0x74
#define ARM_SMMU_STRTAB_BASE 0x80
#define STRTAB_BASE_RA (1UL << 62)
#define STRTAB_BASE_ADDR_MASK GENMASK_ULL(51, 6)
#define ARM_SMMU_STRTAB_BASE_CFG 0x88
#define STRTAB_BASE_CFG_FMT GENMASK(17, 16)
#define STRTAB_BASE_CFG_FMT_LINEAR 0
#define STRTAB_BASE_CFG_FMT_2LVL 1
#define STRTAB_BASE_CFG_SPLIT GENMASK(10, 6)
#define STRTAB_BASE_CFG_LOG2SIZE GENMASK(5, 0)
#define ARM_SMMU_CMDQ_BASE 0x90
#define ARM_SMMU_CMDQ_PROD 0x98
#define ARM_SMMU_CMDQ_CONS 0x9c
#define ARM_SMMU_EVTQ_BASE 0xa0
#define ARM_SMMU_EVTQ_PROD 0x100a8
#define ARM_SMMU_EVTQ_CONS 0x100ac
#define ARM_SMMU_EVTQ_IRQ_CFG0 0xb0
#define ARM_SMMU_EVTQ_IRQ_CFG1 0xb8
#define ARM_SMMU_EVTQ_IRQ_CFG2 0xbc
#define ARM_SMMU_PRIQ_BASE 0xc0
#define ARM_SMMU_PRIQ_PROD 0x100c8
#define ARM_SMMU_PRIQ_CONS 0x100cc
#define ARM_SMMU_PRIQ_IRQ_CFG0 0xd0
#define ARM_SMMU_PRIQ_IRQ_CFG1 0xd8
#define ARM_SMMU_PRIQ_IRQ_CFG2 0xdc
/* Common MSI config fields */
#define MSI_CFG0_ADDR_MASK GENMASK_ULL(51, 2)
#define MSI_CFG2_SH GENMASK(5, 4)
#define MSI_CFG2_MEMATTR GENMASK(3, 0)
/* Common memory attribute values */
#define ARM_SMMU_SH_NSH 0
#define ARM_SMMU_SH_OSH 2
#define ARM_SMMU_SH_ISH 3
#define ARM_SMMU_MEMATTR_DEVICE_nGnRE 0x1
#define ARM_SMMU_MEMATTR_OIWB 0xf
#define Q_IDX(llq, p) ((p) & ((1 << (llq)->max_n_shift) - 1))
#define Q_WRP(llq, p) ((p) & (1 << (llq)->max_n_shift))
#define Q_OVERFLOW_FLAG (1U << 31)
#define Q_OVF(p) ((p) & Q_OVERFLOW_FLAG)
#define Q_ENT(q, p) ((q)->base + \
Q_IDX(&((q)->llq), p) * \
(q)->ent_dwords)
#define Q_BASE_RWA (1UL << 62)
#define Q_BASE_ADDR_MASK GENMASK_ULL(51, 5)
#define Q_BASE_LOG2SIZE GENMASK(4, 0)
/* Ensure DMA allocations are naturally aligned */
#ifdef CONFIG_CMA_ALIGNMENT
#define Q_MAX_SZ_SHIFT (PAGE_SHIFT + CONFIG_CMA_ALIGNMENT)
#else
#define Q_MAX_SZ_SHIFT (PAGE_SHIFT + MAX_ORDER - 1)
#endif
/*
* Stream table.
*
* Linear: Enough to cover 1 << IDR1.SIDSIZE entries
* 2lvl: 128k L1 entries,
* 256 lazy entries per table (each table covers a PCI bus)
*/
#define STRTAB_L1_SZ_SHIFT 20
#define STRTAB_SPLIT 8
#define STRTAB_L1_DESC_DWORDS 1
#define STRTAB_L1_DESC_SPAN GENMASK_ULL(4, 0)
#define STRTAB_L1_DESC_L2PTR_MASK GENMASK_ULL(51, 6)
#define STRTAB_STE_DWORDS 8
#define STRTAB_STE_0_V (1UL << 0)
#define STRTAB_STE_0_CFG GENMASK_ULL(3, 1)
#define STRTAB_STE_0_CFG_ABORT 0
#define STRTAB_STE_0_CFG_BYPASS 4
#define STRTAB_STE_0_CFG_S1_TRANS 5
#define STRTAB_STE_0_CFG_S2_TRANS 6
#define STRTAB_STE_0_S1FMT GENMASK_ULL(5, 4)
#define STRTAB_STE_0_S1FMT_LINEAR 0
#define STRTAB_STE_0_S1CTXPTR_MASK GENMASK_ULL(51, 6)
#define STRTAB_STE_0_S1CDMAX GENMASK_ULL(63, 59)
#define STRTAB_STE_1_S1C_CACHE_NC 0UL
#define STRTAB_STE_1_S1C_CACHE_WBRA 1UL
#define STRTAB_STE_1_S1C_CACHE_WT 2UL
#define STRTAB_STE_1_S1C_CACHE_WB 3UL
#define STRTAB_STE_1_S1CIR GENMASK_ULL(3, 2)
#define STRTAB_STE_1_S1COR GENMASK_ULL(5, 4)
#define STRTAB_STE_1_S1CSH GENMASK_ULL(7, 6)
#define STRTAB_STE_1_S1STALLD (1UL << 27)
#define STRTAB_STE_1_EATS GENMASK_ULL(29, 28)
#define STRTAB_STE_1_EATS_ABT 0UL
#define STRTAB_STE_1_EATS_TRANS 1UL
#define STRTAB_STE_1_EATS_S1CHK 2UL
#define STRTAB_STE_1_STRW GENMASK_ULL(31, 30)
#define STRTAB_STE_1_STRW_NSEL1 0UL
#define STRTAB_STE_1_STRW_EL2 2UL
#define STRTAB_STE_1_SHCFG GENMASK_ULL(45, 44)
#define STRTAB_STE_1_SHCFG_INCOMING 1UL
#define STRTAB_STE_2_S2VMID GENMASK_ULL(15, 0)
#define STRTAB_STE_2_VTCR GENMASK_ULL(50, 32)
#define STRTAB_STE_2_S2AA64 (1UL << 51)
#define STRTAB_STE_2_S2ENDI (1UL << 52)
#define STRTAB_STE_2_S2PTW (1UL << 54)
#define STRTAB_STE_2_S2R (1UL << 58)
#define STRTAB_STE_3_S2TTB_MASK GENMASK_ULL(51, 4)
/* Context descriptor (stage-1 only) */
#define CTXDESC_CD_DWORDS 8
#define CTXDESC_CD_0_TCR_T0SZ GENMASK_ULL(5, 0)
#define ARM64_TCR_T0SZ GENMASK_ULL(5, 0)
#define CTXDESC_CD_0_TCR_TG0 GENMASK_ULL(7, 6)
#define ARM64_TCR_TG0 GENMASK_ULL(15, 14)
#define CTXDESC_CD_0_TCR_IRGN0 GENMASK_ULL(9, 8)
#define ARM64_TCR_IRGN0 GENMASK_ULL(9, 8)
#define CTXDESC_CD_0_TCR_ORGN0 GENMASK_ULL(11, 10)
#define ARM64_TCR_ORGN0 GENMASK_ULL(11, 10)
#define CTXDESC_CD_0_TCR_SH0 GENMASK_ULL(13, 12)
#define ARM64_TCR_SH0 GENMASK_ULL(13, 12)
#define CTXDESC_CD_0_TCR_EPD0 (1ULL << 14)
#define ARM64_TCR_EPD0 (1ULL << 7)
#define CTXDESC_CD_0_TCR_EPD1 (1ULL << 30)
#define ARM64_TCR_EPD1 (1ULL << 23)
#define CTXDESC_CD_0_ENDI (1UL << 15)
#define CTXDESC_CD_0_V (1UL << 31)
#define CTXDESC_CD_0_TCR_IPS GENMASK_ULL(34, 32)
#define ARM64_TCR_IPS GENMASK_ULL(34, 32)
#define CTXDESC_CD_0_TCR_TBI0 (1ULL << 38)
#define ARM64_TCR_TBI0 (1ULL << 37)
#define CTXDESC_CD_0_AA64 (1UL << 41)
#define CTXDESC_CD_0_S (1UL << 44)
#define CTXDESC_CD_0_R (1UL << 45)
#define CTXDESC_CD_0_A (1UL << 46)
#define CTXDESC_CD_0_ASET (1UL << 47)
#define CTXDESC_CD_0_ASID GENMASK_ULL(63, 48)
#define CTXDESC_CD_1_TTB0_MASK GENMASK_ULL(51, 4)
/* Convert between AArch64 (CPU) TCR format and SMMU CD format */
#define ARM_SMMU_TCR2CD(tcr, fld) FIELD_PREP(CTXDESC_CD_0_TCR_##fld, \
FIELD_GET(ARM64_TCR_##fld, tcr))
/* Command queue */
#define CMDQ_ENT_SZ_SHIFT 4
#define CMDQ_ENT_DWORDS ((1 << CMDQ_ENT_SZ_SHIFT) >> 3)
#define CMDQ_MAX_SZ_SHIFT (Q_MAX_SZ_SHIFT - CMDQ_ENT_SZ_SHIFT)
#define CMDQ_CONS_ERR GENMASK(30, 24)
#define CMDQ_ERR_CERROR_NONE_IDX 0
#define CMDQ_ERR_CERROR_ILL_IDX 1
#define CMDQ_ERR_CERROR_ABT_IDX 2
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
#define CMDQ_ERR_CERROR_ATC_INV_IDX 3
#define CMDQ_PROD_OWNED_FLAG Q_OVERFLOW_FLAG
/*
* This is used to size the command queue and therefore must be at least
* BITS_PER_LONG so that the valid_map works correctly (it relies on the
* total number of queue entries being a multiple of BITS_PER_LONG).
*/
#define CMDQ_BATCH_ENTRIES BITS_PER_LONG
#define CMDQ_0_OP GENMASK_ULL(7, 0)
#define CMDQ_0_SSV (1UL << 11)
#define CMDQ_PREFETCH_0_SID GENMASK_ULL(63, 32)
#define CMDQ_PREFETCH_1_SIZE GENMASK_ULL(4, 0)
#define CMDQ_PREFETCH_1_ADDR_MASK GENMASK_ULL(63, 12)
#define CMDQ_CFGI_0_SID GENMASK_ULL(63, 32)
#define CMDQ_CFGI_1_LEAF (1UL << 0)
#define CMDQ_CFGI_1_RANGE GENMASK_ULL(4, 0)
#define CMDQ_TLBI_0_VMID GENMASK_ULL(47, 32)
#define CMDQ_TLBI_0_ASID GENMASK_ULL(63, 48)
#define CMDQ_TLBI_1_LEAF (1UL << 0)
#define CMDQ_TLBI_1_VA_MASK GENMASK_ULL(63, 12)
#define CMDQ_TLBI_1_IPA_MASK GENMASK_ULL(51, 12)
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
#define CMDQ_ATC_0_SSID GENMASK_ULL(31, 12)
#define CMDQ_ATC_0_SID GENMASK_ULL(63, 32)
#define CMDQ_ATC_0_GLOBAL (1UL << 9)
#define CMDQ_ATC_1_SIZE GENMASK_ULL(5, 0)
#define CMDQ_ATC_1_ADDR_MASK GENMASK_ULL(63, 12)
#define CMDQ_PRI_0_SSID GENMASK_ULL(31, 12)
#define CMDQ_PRI_0_SID GENMASK_ULL(63, 32)
#define CMDQ_PRI_1_GRPID GENMASK_ULL(8, 0)
#define CMDQ_PRI_1_RESP GENMASK_ULL(13, 12)
#define CMDQ_SYNC_0_CS GENMASK_ULL(13, 12)
#define CMDQ_SYNC_0_CS_NONE 0
#define CMDQ_SYNC_0_CS_IRQ 1
#define CMDQ_SYNC_0_CS_SEV 2
#define CMDQ_SYNC_0_MSH GENMASK_ULL(23, 22)
#define CMDQ_SYNC_0_MSIATTR GENMASK_ULL(27, 24)
#define CMDQ_SYNC_0_MSIDATA GENMASK_ULL(63, 32)
#define CMDQ_SYNC_1_MSIADDR_MASK GENMASK_ULL(51, 2)
/* Event queue */
#define EVTQ_ENT_SZ_SHIFT 5
#define EVTQ_ENT_DWORDS ((1 << EVTQ_ENT_SZ_SHIFT) >> 3)
#define EVTQ_MAX_SZ_SHIFT (Q_MAX_SZ_SHIFT - EVTQ_ENT_SZ_SHIFT)
#define EVTQ_0_ID GENMASK_ULL(7, 0)
/* PRI queue */
#define PRIQ_ENT_SZ_SHIFT 4
#define PRIQ_ENT_DWORDS ((1 << PRIQ_ENT_SZ_SHIFT) >> 3)
#define PRIQ_MAX_SZ_SHIFT (Q_MAX_SZ_SHIFT - PRIQ_ENT_SZ_SHIFT)
#define PRIQ_0_SID GENMASK_ULL(31, 0)
#define PRIQ_0_SSID GENMASK_ULL(51, 32)
#define PRIQ_0_PERM_PRIV (1UL << 58)
#define PRIQ_0_PERM_EXEC (1UL << 59)
#define PRIQ_0_PERM_READ (1UL << 60)
#define PRIQ_0_PERM_WRITE (1UL << 61)
#define PRIQ_0_PRG_LAST (1UL << 62)
#define PRIQ_0_SSID_V (1UL << 63)
#define PRIQ_1_PRG_IDX GENMASK_ULL(8, 0)
#define PRIQ_1_ADDR_MASK GENMASK_ULL(63, 12)
/* High-level queue structures */
#define ARM_SMMU_POLL_TIMEOUT_US 1000000 /* 1s! */
#define ARM_SMMU_POLL_SPIN_COUNT 10
#define MSI_IOVA_BASE 0x8000000
#define MSI_IOVA_LENGTH 0x100000
iommu/arm-smmu: Make arm-smmu-v3 explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/iommu/Kconfig:config ARM_SMMU_V3 drivers/iommu/Kconfig: bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, but unlike most drivers, we can't delete the function tied to the ".remove" field. This is because as of commit 7aa8619a66ae ("iommu/arm-smmu-v3: Implement shutdown method") the .remove function was given a one line wrapper and re-used to provide a .shutdown service. So we delete the wrapper and re-name the function from remove to shutdown. We add a moduleparam.h include since the file does actually declare some module parameters, and leaving them as such is the easiest way currently to remain backwards compatible with existing use cases. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-02 03:19:17 +08:00
/*
* not really modular, but the easiest way to keep compat with existing
* bootargs behaviour is to continue using module_param_named here.
*/
static bool disable_bypass = 1;
module_param_named(disable_bypass, disable_bypass, bool, S_IRUGO);
MODULE_PARM_DESC(disable_bypass,
"Disable bypass streams such that incoming transactions from devices that are not attached to an iommu domain will report an abort back to the device and will not be allowed to pass through the SMMU.");
enum pri_resp {
PRI_RESP_DENY = 0,
PRI_RESP_FAIL = 1,
PRI_RESP_SUCC = 2,
};
enum arm_smmu_msi_index {
EVTQ_MSI_INDEX,
GERROR_MSI_INDEX,
PRIQ_MSI_INDEX,
ARM_SMMU_MAX_MSIS,
};
static phys_addr_t arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
[EVTQ_MSI_INDEX] = {
ARM_SMMU_EVTQ_IRQ_CFG0,
ARM_SMMU_EVTQ_IRQ_CFG1,
ARM_SMMU_EVTQ_IRQ_CFG2,
},
[GERROR_MSI_INDEX] = {
ARM_SMMU_GERROR_IRQ_CFG0,
ARM_SMMU_GERROR_IRQ_CFG1,
ARM_SMMU_GERROR_IRQ_CFG2,
},
[PRIQ_MSI_INDEX] = {
ARM_SMMU_PRIQ_IRQ_CFG0,
ARM_SMMU_PRIQ_IRQ_CFG1,
ARM_SMMU_PRIQ_IRQ_CFG2,
},
};
struct arm_smmu_cmdq_ent {
/* Common fields */
u8 opcode;
bool substream_valid;
/* Command-specific fields */
union {
#define CMDQ_OP_PREFETCH_CFG 0x1
struct {
u32 sid;
u8 size;
u64 addr;
} prefetch;
#define CMDQ_OP_CFGI_STE 0x3
#define CMDQ_OP_CFGI_ALL 0x4
struct {
u32 sid;
union {
bool leaf;
u8 span;
};
} cfgi;
#define CMDQ_OP_TLBI_NH_ASID 0x11
#define CMDQ_OP_TLBI_NH_VA 0x12
#define CMDQ_OP_TLBI_EL2_ALL 0x20
#define CMDQ_OP_TLBI_S12_VMALL 0x28
#define CMDQ_OP_TLBI_S2_IPA 0x2a
#define CMDQ_OP_TLBI_NSNH_ALL 0x30
struct {
u16 asid;
u16 vmid;
bool leaf;
u64 addr;
} tlbi;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
#define CMDQ_OP_ATC_INV 0x40
#define ATC_INV_SIZE_ALL 52
struct {
u32 sid;
u32 ssid;
u64 addr;
u8 size;
bool global;
} atc;
#define CMDQ_OP_PRI_RESP 0x41
struct {
u32 sid;
u32 ssid;
u16 grpid;
enum pri_resp resp;
} pri;
#define CMDQ_OP_CMD_SYNC 0x46
struct {
u64 msiaddr;
} sync;
};
};
struct arm_smmu_ll_queue {
union {
u64 val;
struct {
u32 prod;
u32 cons;
};
struct {
atomic_t prod;
atomic_t cons;
} atomic;
u8 __pad[SMP_CACHE_BYTES];
} ____cacheline_aligned_in_smp;
u32 max_n_shift;
};
struct arm_smmu_queue {
struct arm_smmu_ll_queue llq;
int irq; /* Wired interrupt */
__le64 *base;
dma_addr_t base_dma;
u64 q_base;
size_t ent_dwords;
u32 __iomem *prod_reg;
u32 __iomem *cons_reg;
};
struct arm_smmu_queue_poll {
ktime_t timeout;
unsigned int delay;
unsigned int spin_cnt;
bool wfe;
};
struct arm_smmu_cmdq {
struct arm_smmu_queue q;
atomic_long_t *valid_map;
atomic_t owner_prod;
atomic_t lock;
};
struct arm_smmu_evtq {
struct arm_smmu_queue q;
u32 max_stalls;
};
struct arm_smmu_priq {
struct arm_smmu_queue q;
};
/* High-level stream table and context descriptor structures */
struct arm_smmu_strtab_l1_desc {
u8 span;
__le64 *l2ptr;
dma_addr_t l2ptr_dma;
};
struct arm_smmu_s1_cfg {
__le64 *cdptr;
dma_addr_t cdptr_dma;
struct arm_smmu_ctx_desc {
u16 asid;
u64 ttbr;
u64 tcr;
u64 mair;
} cd;
};
struct arm_smmu_s2_cfg {
u16 vmid;
u64 vttbr;
u64 vtcr;
};
struct arm_smmu_strtab_cfg {
__le64 *strtab;
dma_addr_t strtab_dma;
struct arm_smmu_strtab_l1_desc *l1_desc;
unsigned int num_l1_ents;
u64 strtab_base;
u32 strtab_base_cfg;
};
/* An SMMUv3 instance */
struct arm_smmu_device {
struct device *dev;
void __iomem *base;
#define ARM_SMMU_FEAT_2_LVL_STRTAB (1 << 0)
#define ARM_SMMU_FEAT_2_LVL_CDTAB (1 << 1)
#define ARM_SMMU_FEAT_TT_LE (1 << 2)
#define ARM_SMMU_FEAT_TT_BE (1 << 3)
#define ARM_SMMU_FEAT_PRI (1 << 4)
#define ARM_SMMU_FEAT_ATS (1 << 5)
#define ARM_SMMU_FEAT_SEV (1 << 6)
#define ARM_SMMU_FEAT_MSI (1 << 7)
#define ARM_SMMU_FEAT_COHERENCY (1 << 8)
#define ARM_SMMU_FEAT_TRANS_S1 (1 << 9)
#define ARM_SMMU_FEAT_TRANS_S2 (1 << 10)
#define ARM_SMMU_FEAT_STALLS (1 << 11)
#define ARM_SMMU_FEAT_HYP (1 << 12)
#define ARM_SMMU_FEAT_STALL_FORCE (1 << 13)
#define ARM_SMMU_FEAT_VAX (1 << 14)
u32 features;
#define ARM_SMMU_OPT_SKIP_PREFETCH (1 << 0)
#define ARM_SMMU_OPT_PAGE0_REGS_ONLY (1 << 1)
u32 options;
struct arm_smmu_cmdq cmdq;
struct arm_smmu_evtq evtq;
struct arm_smmu_priq priq;
int gerr_irq;
int combined_irq;
unsigned long ias; /* IPA */
unsigned long oas; /* PA */
unsigned long pgsize_bitmap;
#define ARM_SMMU_MAX_ASIDS (1 << 16)
unsigned int asid_bits;
DECLARE_BITMAP(asid_map, ARM_SMMU_MAX_ASIDS);
#define ARM_SMMU_MAX_VMIDS (1 << 16)
unsigned int vmid_bits;
DECLARE_BITMAP(vmid_map, ARM_SMMU_MAX_VMIDS);
unsigned int ssid_bits;
unsigned int sid_bits;
struct arm_smmu_strtab_cfg strtab_cfg;
/* IOMMU core code handle */
struct iommu_device iommu;
};
/* SMMU private data for each master */
struct arm_smmu_master {
struct arm_smmu_device *smmu;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
struct device *dev;
struct arm_smmu_domain *domain;
struct list_head domain_head;
u32 *sids;
unsigned int num_sids;
bool ats_enabled;
};
/* SMMU private data for an IOMMU domain */
enum arm_smmu_domain_stage {
ARM_SMMU_DOMAIN_S1 = 0,
ARM_SMMU_DOMAIN_S2,
ARM_SMMU_DOMAIN_NESTED,
ARM_SMMU_DOMAIN_BYPASS,
};
struct arm_smmu_domain {
struct arm_smmu_device *smmu;
struct mutex init_mutex; /* Protects smmu pointer */
struct io_pgtable_ops *pgtbl_ops;
bool non_strict;
atomic_t nr_ats_masters;
enum arm_smmu_domain_stage stage;
union {
struct arm_smmu_s1_cfg s1_cfg;
struct arm_smmu_s2_cfg s2_cfg;
};
struct iommu_domain domain;
struct list_head devices;
spinlock_t devices_lock;
};
struct arm_smmu_option_prop {
u32 opt;
const char *prop;
};
static struct arm_smmu_option_prop arm_smmu_options[] = {
{ ARM_SMMU_OPT_SKIP_PREFETCH, "hisilicon,broken-prefetch-cmd" },
{ ARM_SMMU_OPT_PAGE0_REGS_ONLY, "cavium,cn9900-broken-page1-regspace"},
{ 0, NULL},
};
static inline void __iomem *arm_smmu_page1_fixup(unsigned long offset,
struct arm_smmu_device *smmu)
{
if ((offset > SZ_64K) &&
(smmu->options & ARM_SMMU_OPT_PAGE0_REGS_ONLY))
offset -= SZ_64K;
return smmu->base + offset;
}
static struct arm_smmu_domain *to_smmu_domain(struct iommu_domain *dom)
{
return container_of(dom, struct arm_smmu_domain, domain);
}
static void parse_driver_options(struct arm_smmu_device *smmu)
{
int i = 0;
do {
if (of_property_read_bool(smmu->dev->of_node,
arm_smmu_options[i].prop)) {
smmu->options |= arm_smmu_options[i].opt;
dev_notice(smmu->dev, "option %s\n",
arm_smmu_options[i].prop);
}
} while (arm_smmu_options[++i].opt);
}
/* Low-level queue manipulation functions */
static bool queue_has_space(struct arm_smmu_ll_queue *q, u32 n)
{
u32 space, prod, cons;
prod = Q_IDX(q, q->prod);
cons = Q_IDX(q, q->cons);
if (Q_WRP(q, q->prod) == Q_WRP(q, q->cons))
space = (1 << q->max_n_shift) - (prod - cons);
else
space = cons - prod;
return space >= n;
}
static bool queue_full(struct arm_smmu_ll_queue *q)
{
return Q_IDX(q, q->prod) == Q_IDX(q, q->cons) &&
Q_WRP(q, q->prod) != Q_WRP(q, q->cons);
}
static bool queue_empty(struct arm_smmu_ll_queue *q)
{
return Q_IDX(q, q->prod) == Q_IDX(q, q->cons) &&
Q_WRP(q, q->prod) == Q_WRP(q, q->cons);
}
static bool queue_consumed(struct arm_smmu_ll_queue *q, u32 prod)
{
return ((Q_WRP(q, q->cons) == Q_WRP(q, prod)) &&
(Q_IDX(q, q->cons) > Q_IDX(q, prod))) ||
((Q_WRP(q, q->cons) != Q_WRP(q, prod)) &&
(Q_IDX(q, q->cons) <= Q_IDX(q, prod)));
}
static void queue_sync_cons_out(struct arm_smmu_queue *q)
{
/*
* Ensure that all CPU accesses (reads and writes) to the queue
* are complete before we update the cons pointer.
*/
mb();
writel_relaxed(q->llq.cons, q->cons_reg);
}
static void queue_inc_cons(struct arm_smmu_ll_queue *q)
{
u32 cons = (Q_WRP(q, q->cons) | Q_IDX(q, q->cons)) + 1;
q->cons = Q_OVF(q->cons) | Q_WRP(q, cons) | Q_IDX(q, cons);
}
static int queue_sync_prod_in(struct arm_smmu_queue *q)
{
int ret = 0;
u32 prod = readl_relaxed(q->prod_reg);
if (Q_OVF(prod) != Q_OVF(q->llq.prod))
ret = -EOVERFLOW;
q->llq.prod = prod;
return ret;
}
static u32 queue_inc_prod_n(struct arm_smmu_ll_queue *q, int n)
{
u32 prod = (Q_WRP(q, q->prod) | Q_IDX(q, q->prod)) + n;
return Q_OVF(q->prod) | Q_WRP(q, prod) | Q_IDX(q, prod);
}
static void queue_poll_init(struct arm_smmu_device *smmu,
struct arm_smmu_queue_poll *qp)
{
qp->delay = 1;
qp->spin_cnt = 0;
qp->wfe = !!(smmu->features & ARM_SMMU_FEAT_SEV);
qp->timeout = ktime_add_us(ktime_get(), ARM_SMMU_POLL_TIMEOUT_US);
}
static int queue_poll(struct arm_smmu_queue_poll *qp)
{
if (ktime_compare(ktime_get(), qp->timeout) > 0)
return -ETIMEDOUT;
if (qp->wfe) {
wfe();
} else if (++qp->spin_cnt < ARM_SMMU_POLL_SPIN_COUNT) {
cpu_relax();
} else {
udelay(qp->delay);
qp->delay *= 2;
qp->spin_cnt = 0;
}
return 0;
}
static void queue_write(__le64 *dst, u64 *src, size_t n_dwords)
{
int i;
for (i = 0; i < n_dwords; ++i)
*dst++ = cpu_to_le64(*src++);
}
static void queue_read(__le64 *dst, u64 *src, size_t n_dwords)
{
int i;
for (i = 0; i < n_dwords; ++i)
*dst++ = le64_to_cpu(*src++);
}
static int queue_remove_raw(struct arm_smmu_queue *q, u64 *ent)
{
if (queue_empty(&q->llq))
return -EAGAIN;
queue_read(ent, Q_ENT(q, q->llq.cons), q->ent_dwords);
queue_inc_cons(&q->llq);
queue_sync_cons_out(q);
return 0;
}
/* High-level queue accessors */
static int arm_smmu_cmdq_build_cmd(u64 *cmd, struct arm_smmu_cmdq_ent *ent)
{
memset(cmd, 0, 1 << CMDQ_ENT_SZ_SHIFT);
cmd[0] |= FIELD_PREP(CMDQ_0_OP, ent->opcode);
switch (ent->opcode) {
case CMDQ_OP_TLBI_EL2_ALL:
case CMDQ_OP_TLBI_NSNH_ALL:
break;
case CMDQ_OP_PREFETCH_CFG:
cmd[0] |= FIELD_PREP(CMDQ_PREFETCH_0_SID, ent->prefetch.sid);
cmd[1] |= FIELD_PREP(CMDQ_PREFETCH_1_SIZE, ent->prefetch.size);
cmd[1] |= ent->prefetch.addr & CMDQ_PREFETCH_1_ADDR_MASK;
break;
case CMDQ_OP_CFGI_STE:
cmd[0] |= FIELD_PREP(CMDQ_CFGI_0_SID, ent->cfgi.sid);
cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_LEAF, ent->cfgi.leaf);
break;
case CMDQ_OP_CFGI_ALL:
/* Cover the entire SID range */
cmd[1] |= FIELD_PREP(CMDQ_CFGI_1_RANGE, 31);
break;
case CMDQ_OP_TLBI_NH_VA:
cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_ASID, ent->tlbi.asid);
cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_LEAF, ent->tlbi.leaf);
cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_VA_MASK;
break;
case CMDQ_OP_TLBI_S2_IPA:
cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_VMID, ent->tlbi.vmid);
cmd[1] |= FIELD_PREP(CMDQ_TLBI_1_LEAF, ent->tlbi.leaf);
cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_IPA_MASK;
break;
case CMDQ_OP_TLBI_NH_ASID:
cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_ASID, ent->tlbi.asid);
/* Fallthrough */
case CMDQ_OP_TLBI_S12_VMALL:
cmd[0] |= FIELD_PREP(CMDQ_TLBI_0_VMID, ent->tlbi.vmid);
break;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
case CMDQ_OP_ATC_INV:
cmd[0] |= FIELD_PREP(CMDQ_0_SSV, ent->substream_valid);
cmd[0] |= FIELD_PREP(CMDQ_ATC_0_GLOBAL, ent->atc.global);
cmd[0] |= FIELD_PREP(CMDQ_ATC_0_SSID, ent->atc.ssid);
cmd[0] |= FIELD_PREP(CMDQ_ATC_0_SID, ent->atc.sid);
cmd[1] |= FIELD_PREP(CMDQ_ATC_1_SIZE, ent->atc.size);
cmd[1] |= ent->atc.addr & CMDQ_ATC_1_ADDR_MASK;
break;
case CMDQ_OP_PRI_RESP:
cmd[0] |= FIELD_PREP(CMDQ_0_SSV, ent->substream_valid);
cmd[0] |= FIELD_PREP(CMDQ_PRI_0_SSID, ent->pri.ssid);
cmd[0] |= FIELD_PREP(CMDQ_PRI_0_SID, ent->pri.sid);
cmd[1] |= FIELD_PREP(CMDQ_PRI_1_GRPID, ent->pri.grpid);
switch (ent->pri.resp) {
case PRI_RESP_DENY:
case PRI_RESP_FAIL:
case PRI_RESP_SUCC:
break;
default:
return -EINVAL;
}
cmd[1] |= FIELD_PREP(CMDQ_PRI_1_RESP, ent->pri.resp);
break;
case CMDQ_OP_CMD_SYNC:
if (ent->sync.msiaddr) {
cmd[0] |= FIELD_PREP(CMDQ_SYNC_0_CS, CMDQ_SYNC_0_CS_IRQ);
cmd[1] |= ent->sync.msiaddr & CMDQ_SYNC_1_MSIADDR_MASK;
} else {
cmd[0] |= FIELD_PREP(CMDQ_SYNC_0_CS, CMDQ_SYNC_0_CS_SEV);
}
cmd[0] |= FIELD_PREP(CMDQ_SYNC_0_MSH, ARM_SMMU_SH_ISH);
cmd[0] |= FIELD_PREP(CMDQ_SYNC_0_MSIATTR, ARM_SMMU_MEMATTR_OIWB);
break;
default:
return -ENOENT;
}
return 0;
}
static void arm_smmu_cmdq_build_sync_cmd(u64 *cmd, struct arm_smmu_device *smmu,
u32 prod)
{
struct arm_smmu_queue *q = &smmu->cmdq.q;
struct arm_smmu_cmdq_ent ent = {
.opcode = CMDQ_OP_CMD_SYNC,
};
/*
* Beware that Hi16xx adds an extra 32 bits of goodness to its MSI
* payload, so the write will zero the entire command on that platform.
*/
if (smmu->features & ARM_SMMU_FEAT_MSI &&
smmu->features & ARM_SMMU_FEAT_COHERENCY) {
ent.sync.msiaddr = q->base_dma + Q_IDX(&q->llq, prod) *
q->ent_dwords * 8;
}
arm_smmu_cmdq_build_cmd(cmd, &ent);
}
static void arm_smmu_cmdq_skip_err(struct arm_smmu_device *smmu)
{
static const char *cerror_str[] = {
[CMDQ_ERR_CERROR_NONE_IDX] = "No error",
[CMDQ_ERR_CERROR_ILL_IDX] = "Illegal command",
[CMDQ_ERR_CERROR_ABT_IDX] = "Abort on command fetch",
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
[CMDQ_ERR_CERROR_ATC_INV_IDX] = "ATC invalidate timeout",
};
int i;
u64 cmd[CMDQ_ENT_DWORDS];
struct arm_smmu_queue *q = &smmu->cmdq.q;
u32 cons = readl_relaxed(q->cons_reg);
u32 idx = FIELD_GET(CMDQ_CONS_ERR, cons);
struct arm_smmu_cmdq_ent cmd_sync = {
.opcode = CMDQ_OP_CMD_SYNC,
};
dev_err(smmu->dev, "CMDQ error (cons 0x%08x): %s\n", cons,
idx < ARRAY_SIZE(cerror_str) ? cerror_str[idx] : "Unknown");
switch (idx) {
case CMDQ_ERR_CERROR_ABT_IDX:
dev_err(smmu->dev, "retrying command fetch\n");
case CMDQ_ERR_CERROR_NONE_IDX:
return;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
case CMDQ_ERR_CERROR_ATC_INV_IDX:
/*
* ATC Invalidation Completion timeout. CONS is still pointing
* at the CMD_SYNC. Attempt to complete other pending commands
* by repeating the CMD_SYNC, though we might well end up back
* here since the ATC invalidation may still be pending.
*/
return;
case CMDQ_ERR_CERROR_ILL_IDX:
/* Fallthrough */
default:
break;
}
/*
* We may have concurrent producers, so we need to be careful
* not to touch any of the shadow cmdq state.
*/
queue_read(cmd, Q_ENT(q, cons), q->ent_dwords);
dev_err(smmu->dev, "skipping command in error state:\n");
for (i = 0; i < ARRAY_SIZE(cmd); ++i)
dev_err(smmu->dev, "\t0x%016llx\n", (unsigned long long)cmd[i]);
/* Convert the erroneous command into a CMD_SYNC */
if (arm_smmu_cmdq_build_cmd(cmd, &cmd_sync)) {
dev_err(smmu->dev, "failed to convert to CMD_SYNC\n");
return;
}
queue_write(Q_ENT(q, cons), cmd, q->ent_dwords);
}
/*
* Command queue locking.
* This is a form of bastardised rwlock with the following major changes:
*
* - The only LOCK routines are exclusive_trylock() and shared_lock().
* Neither have barrier semantics, and instead provide only a control
* dependency.
*
* - The UNLOCK routines are supplemented with shared_tryunlock(), which
* fails if the caller appears to be the last lock holder (yes, this is
* racy). All successful UNLOCK routines have RELEASE semantics.
*/
static void arm_smmu_cmdq_shared_lock(struct arm_smmu_cmdq *cmdq)
{
int val;
/*
* We can try to avoid the cmpxchg() loop by simply incrementing the
* lock counter. When held in exclusive state, the lock counter is set
* to INT_MIN so these increments won't hurt as the value will remain
* negative.
*/
if (atomic_fetch_inc_relaxed(&cmdq->lock) >= 0)
return;
do {
val = atomic_cond_read_relaxed(&cmdq->lock, VAL >= 0);
} while (atomic_cmpxchg_relaxed(&cmdq->lock, val, val + 1) != val);
}
static void arm_smmu_cmdq_shared_unlock(struct arm_smmu_cmdq *cmdq)
{
(void)atomic_dec_return_release(&cmdq->lock);
}
static bool arm_smmu_cmdq_shared_tryunlock(struct arm_smmu_cmdq *cmdq)
{
if (atomic_read(&cmdq->lock) == 1)
return false;
arm_smmu_cmdq_shared_unlock(cmdq);
return true;
}
#define arm_smmu_cmdq_exclusive_trylock_irqsave(cmdq, flags) \
({ \
bool __ret; \
local_irq_save(flags); \
__ret = !atomic_cmpxchg_relaxed(&cmdq->lock, 0, INT_MIN); \
if (!__ret) \
local_irq_restore(flags); \
__ret; \
})
#define arm_smmu_cmdq_exclusive_unlock_irqrestore(cmdq, flags) \
({ \
atomic_set_release(&cmdq->lock, 0); \
local_irq_restore(flags); \
})
/*
* Command queue insertion.
* This is made fiddly by our attempts to achieve some sort of scalability
* since there is one queue shared amongst all of the CPUs in the system. If
* you like mixed-size concurrency, dependency ordering and relaxed atomics,
* then you'll *love* this monstrosity.
*
* The basic idea is to split the queue up into ranges of commands that are
* owned by a given CPU; the owner may not have written all of the commands
* itself, but is responsible for advancing the hardware prod pointer when
* the time comes. The algorithm is roughly:
*
* 1. Allocate some space in the queue. At this point we also discover
* whether the head of the queue is currently owned by another CPU,
* or whether we are the owner.
*
* 2. Write our commands into our allocated slots in the queue.
*
* 3. Mark our slots as valid in arm_smmu_cmdq.valid_map.
*
* 4. If we are an owner:
* a. Wait for the previous owner to finish.
* b. Mark the queue head as unowned, which tells us the range
* that we are responsible for publishing.
* c. Wait for all commands in our owned range to become valid.
* d. Advance the hardware prod pointer.
* e. Tell the next owner we've finished.
*
* 5. If we are inserting a CMD_SYNC (we may or may not have been an
* owner), then we need to stick around until it has completed:
* a. If we have MSIs, the SMMU can write back into the CMD_SYNC
* to clear the first 4 bytes.
* b. Otherwise, we spin waiting for the hardware cons pointer to
* advance past our command.
*
* The devil is in the details, particularly the use of locking for handling
* SYNC completion and freeing up space in the queue before we think that it is
* full.
*/
static void __arm_smmu_cmdq_poll_set_valid_map(struct arm_smmu_cmdq *cmdq,
u32 sprod, u32 eprod, bool set)
{
u32 swidx, sbidx, ewidx, ebidx;
struct arm_smmu_ll_queue llq = {
.max_n_shift = cmdq->q.llq.max_n_shift,
.prod = sprod,
};
ewidx = BIT_WORD(Q_IDX(&llq, eprod));
ebidx = Q_IDX(&llq, eprod) % BITS_PER_LONG;
while (llq.prod != eprod) {
unsigned long mask;
atomic_long_t *ptr;
u32 limit = BITS_PER_LONG;
swidx = BIT_WORD(Q_IDX(&llq, llq.prod));
sbidx = Q_IDX(&llq, llq.prod) % BITS_PER_LONG;
ptr = &cmdq->valid_map[swidx];
if ((swidx == ewidx) && (sbidx < ebidx))
limit = ebidx;
mask = GENMASK(limit - 1, sbidx);
/*
* The valid bit is the inverse of the wrap bit. This means
* that a zero-initialised queue is invalid and, after marking
* all entries as valid, they become invalid again when we
* wrap.
*/
if (set) {
atomic_long_xor(mask, ptr);
} else { /* Poll */
unsigned long valid;
valid = (ULONG_MAX + !!Q_WRP(&llq, llq.prod)) & mask;
atomic_long_cond_read_relaxed(ptr, (VAL & mask) == valid);
}
llq.prod = queue_inc_prod_n(&llq, limit - sbidx);
}
}
/* Mark all entries in the range [sprod, eprod) as valid */
static void arm_smmu_cmdq_set_valid_map(struct arm_smmu_cmdq *cmdq,
u32 sprod, u32 eprod)
{
__arm_smmu_cmdq_poll_set_valid_map(cmdq, sprod, eprod, true);
}
/* Wait for all entries in the range [sprod, eprod) to become valid */
static void arm_smmu_cmdq_poll_valid_map(struct arm_smmu_cmdq *cmdq,
u32 sprod, u32 eprod)
{
__arm_smmu_cmdq_poll_set_valid_map(cmdq, sprod, eprod, false);
}
/* Wait for the command queue to become non-full */
static int arm_smmu_cmdq_poll_until_not_full(struct arm_smmu_device *smmu,
struct arm_smmu_ll_queue *llq)
{
unsigned long flags;
struct arm_smmu_queue_poll qp;
struct arm_smmu_cmdq *cmdq = &smmu->cmdq;
int ret = 0;
/*
* Try to update our copy of cons by grabbing exclusive cmdq access. If
* that fails, spin until somebody else updates it for us.
*/
if (arm_smmu_cmdq_exclusive_trylock_irqsave(cmdq, flags)) {
WRITE_ONCE(cmdq->q.llq.cons, readl_relaxed(cmdq->q.cons_reg));
arm_smmu_cmdq_exclusive_unlock_irqrestore(cmdq, flags);
llq->val = READ_ONCE(cmdq->q.llq.val);
return 0;
}
queue_poll_init(smmu, &qp);
do {
llq->val = READ_ONCE(smmu->cmdq.q.llq.val);
if (!queue_full(llq))
break;
ret = queue_poll(&qp);
} while (!ret);
return ret;
}
/*
* Wait until the SMMU signals a CMD_SYNC completion MSI.
* Must be called with the cmdq lock held in some capacity.
*/
static int __arm_smmu_cmdq_poll_until_msi(struct arm_smmu_device *smmu,
struct arm_smmu_ll_queue *llq)
{
int ret = 0;
struct arm_smmu_queue_poll qp;
struct arm_smmu_cmdq *cmdq = &smmu->cmdq;
u32 *cmd = (u32 *)(Q_ENT(&cmdq->q, llq->prod));
queue_poll_init(smmu, &qp);
/*
* The MSI won't generate an event, since it's being written back
* into the command queue.
*/
qp.wfe = false;
smp_cond_load_relaxed(cmd, !VAL || (ret = queue_poll(&qp)));
llq->cons = ret ? llq->prod : queue_inc_prod_n(llq, 1);
return ret;
}
/*
* Wait until the SMMU cons index passes llq->prod.
* Must be called with the cmdq lock held in some capacity.
*/
static int __arm_smmu_cmdq_poll_until_consumed(struct arm_smmu_device *smmu,
struct arm_smmu_ll_queue *llq)
{
struct arm_smmu_queue_poll qp;
struct arm_smmu_cmdq *cmdq = &smmu->cmdq;
u32 prod = llq->prod;
int ret = 0;
queue_poll_init(smmu, &qp);
llq->val = READ_ONCE(smmu->cmdq.q.llq.val);
do {
if (queue_consumed(llq, prod))
break;
ret = queue_poll(&qp);
/*
* This needs to be a readl() so that our subsequent call
* to arm_smmu_cmdq_shared_tryunlock() can fail accurately.
*
* Specifically, we need to ensure that we observe all
* shared_lock()s by other CMD_SYNCs that share our owner,
* so that a failing call to tryunlock() means that we're
* the last one out and therefore we can safely advance
* cmdq->q.llq.cons. Roughly speaking:
*
* CPU 0 CPU1 CPU2 (us)
*
* if (sync)
* shared_lock();
*
* dma_wmb();
* set_valid_map();
*
* if (owner) {
* poll_valid_map();
* <control dependency>
* writel(prod_reg);
*
* readl(cons_reg);
* tryunlock();
*
* Requires us to see CPU 0's shared_lock() acquisition.
*/
llq->cons = readl(cmdq->q.cons_reg);
} while (!ret);
return ret;
}
static int arm_smmu_cmdq_poll_until_sync(struct arm_smmu_device *smmu,
struct arm_smmu_ll_queue *llq)
{
if (smmu->features & ARM_SMMU_FEAT_MSI &&
smmu->features & ARM_SMMU_FEAT_COHERENCY)
return __arm_smmu_cmdq_poll_until_msi(smmu, llq);
return __arm_smmu_cmdq_poll_until_consumed(smmu, llq);
}
static void arm_smmu_cmdq_write_entries(struct arm_smmu_cmdq *cmdq, u64 *cmds,
u32 prod, int n)
{
int i;
struct arm_smmu_ll_queue llq = {
.max_n_shift = cmdq->q.llq.max_n_shift,
.prod = prod,
};
for (i = 0; i < n; ++i) {
u64 *cmd = &cmds[i * CMDQ_ENT_DWORDS];
prod = queue_inc_prod_n(&llq, i);
queue_write(Q_ENT(&cmdq->q, prod), cmd, CMDQ_ENT_DWORDS);
}
}
/*
* This is the actual insertion function, and provides the following
* ordering guarantees to callers:
*
* - There is a dma_wmb() before publishing any commands to the queue.
* This can be relied upon to order prior writes to data structures
* in memory (such as a CD or an STE) before the command.
*
* - On completion of a CMD_SYNC, there is a control dependency.
* This can be relied upon to order subsequent writes to memory (e.g.
* freeing an IOVA) after completion of the CMD_SYNC.
*
* - Command insertion is totally ordered, so if two CPUs each race to
* insert their own list of commands then all of the commands from one
* CPU will appear before any of the commands from the other CPU.
*/
static int arm_smmu_cmdq_issue_cmdlist(struct arm_smmu_device *smmu,
u64 *cmds, int n, bool sync)
{
u64 cmd_sync[CMDQ_ENT_DWORDS];
u32 prod;
unsigned long flags;
bool owner;
struct arm_smmu_cmdq *cmdq = &smmu->cmdq;
struct arm_smmu_ll_queue llq = {
.max_n_shift = cmdq->q.llq.max_n_shift,
}, head = llq;
int ret = 0;
/* 1. Allocate some space in the queue */
local_irq_save(flags);
llq.val = READ_ONCE(cmdq->q.llq.val);
do {
u64 old;
while (!queue_has_space(&llq, n + sync)) {
local_irq_restore(flags);
if (arm_smmu_cmdq_poll_until_not_full(smmu, &llq))
dev_err_ratelimited(smmu->dev, "CMDQ timeout\n");
local_irq_save(flags);
}
head.cons = llq.cons;
head.prod = queue_inc_prod_n(&llq, n + sync) |
CMDQ_PROD_OWNED_FLAG;
old = cmpxchg_relaxed(&cmdq->q.llq.val, llq.val, head.val);
if (old == llq.val)
break;
llq.val = old;
} while (1);
owner = !(llq.prod & CMDQ_PROD_OWNED_FLAG);
head.prod &= ~CMDQ_PROD_OWNED_FLAG;
llq.prod &= ~CMDQ_PROD_OWNED_FLAG;
/*
* 2. Write our commands into the queue
* Dependency ordering from the cmpxchg() loop above.
*/
arm_smmu_cmdq_write_entries(cmdq, cmds, llq.prod, n);
if (sync) {
prod = queue_inc_prod_n(&llq, n);
arm_smmu_cmdq_build_sync_cmd(cmd_sync, smmu, prod);
queue_write(Q_ENT(&cmdq->q, prod), cmd_sync, CMDQ_ENT_DWORDS);
/*
* In order to determine completion of our CMD_SYNC, we must
* ensure that the queue can't wrap twice without us noticing.
* We achieve that by taking the cmdq lock as shared before
* marking our slot as valid.
*/
arm_smmu_cmdq_shared_lock(cmdq);
}
/* 3. Mark our slots as valid, ensuring commands are visible first */
dma_wmb();
arm_smmu_cmdq_set_valid_map(cmdq, llq.prod, head.prod);
/* 4. If we are the owner, take control of the SMMU hardware */
if (owner) {
/* a. Wait for previous owner to finish */
atomic_cond_read_relaxed(&cmdq->owner_prod, VAL == llq.prod);
/* b. Stop gathering work by clearing the owned flag */
prod = atomic_fetch_andnot_relaxed(CMDQ_PROD_OWNED_FLAG,
&cmdq->q.llq.atomic.prod);
prod &= ~CMDQ_PROD_OWNED_FLAG;
/*
* c. Wait for any gathered work to be written to the queue.
* Note that we read our own entries so that we have the control
* dependency required by (d).
*/
arm_smmu_cmdq_poll_valid_map(cmdq, llq.prod, prod);
/*
* d. Advance the hardware prod pointer
* Control dependency ordering from the entries becoming valid.
*/
writel_relaxed(prod, cmdq->q.prod_reg);
/*
* e. Tell the next owner we're done
* Make sure we've updated the hardware first, so that we don't
* race to update prod and potentially move it backwards.
*/
atomic_set_release(&cmdq->owner_prod, prod);
}
/* 5. If we are inserting a CMD_SYNC, we must wait for it to complete */
if (sync) {
llq.prod = queue_inc_prod_n(&llq, n);
ret = arm_smmu_cmdq_poll_until_sync(smmu, &llq);
if (ret) {
dev_err_ratelimited(smmu->dev,
"CMD_SYNC timeout at 0x%08x [hwprod 0x%08x, hwcons 0x%08x]\n",
llq.prod,
readl_relaxed(cmdq->q.prod_reg),
readl_relaxed(cmdq->q.cons_reg));
}
/*
* Try to unlock the cmq lock. This will fail if we're the last
* reader, in which case we can safely update cmdq->q.llq.cons
*/
if (!arm_smmu_cmdq_shared_tryunlock(cmdq)) {
WRITE_ONCE(cmdq->q.llq.cons, llq.cons);
arm_smmu_cmdq_shared_unlock(cmdq);
}
}
local_irq_restore(flags);
return ret;
}
static int arm_smmu_cmdq_issue_cmd(struct arm_smmu_device *smmu,
struct arm_smmu_cmdq_ent *ent)
{
u64 cmd[CMDQ_ENT_DWORDS];
if (arm_smmu_cmdq_build_cmd(cmd, ent)) {
dev_warn(smmu->dev, "ignoring unknown CMDQ opcode 0x%x\n",
ent->opcode);
return -EINVAL;
}
return arm_smmu_cmdq_issue_cmdlist(smmu, cmd, 1, false);
}
static int arm_smmu_cmdq_issue_sync(struct arm_smmu_device *smmu)
{
return arm_smmu_cmdq_issue_cmdlist(smmu, NULL, 0, true);
}
/* Context descriptor manipulation functions */
static u64 arm_smmu_cpu_tcr_to_cd(u64 tcr)
{
u64 val = 0;
/* Repack the TCR. Just care about TTBR0 for now */
val |= ARM_SMMU_TCR2CD(tcr, T0SZ);
val |= ARM_SMMU_TCR2CD(tcr, TG0);
val |= ARM_SMMU_TCR2CD(tcr, IRGN0);
val |= ARM_SMMU_TCR2CD(tcr, ORGN0);
val |= ARM_SMMU_TCR2CD(tcr, SH0);
val |= ARM_SMMU_TCR2CD(tcr, EPD0);
val |= ARM_SMMU_TCR2CD(tcr, EPD1);
val |= ARM_SMMU_TCR2CD(tcr, IPS);
return val;
}
static void arm_smmu_write_ctx_desc(struct arm_smmu_device *smmu,
struct arm_smmu_s1_cfg *cfg)
{
u64 val;
/*
* We don't need to issue any invalidation here, as we'll invalidate
* the STE when installing the new entry anyway.
*/
val = arm_smmu_cpu_tcr_to_cd(cfg->cd.tcr) |
#ifdef __BIG_ENDIAN
CTXDESC_CD_0_ENDI |
#endif
CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET |
CTXDESC_CD_0_AA64 | FIELD_PREP(CTXDESC_CD_0_ASID, cfg->cd.asid) |
CTXDESC_CD_0_V;
/* STALL_MODEL==0b10 && CD.S==0 is ILLEGAL */
if (smmu->features & ARM_SMMU_FEAT_STALL_FORCE)
val |= CTXDESC_CD_0_S;
cfg->cdptr[0] = cpu_to_le64(val);
val = cfg->cd.ttbr & CTXDESC_CD_1_TTB0_MASK;
cfg->cdptr[1] = cpu_to_le64(val);
cfg->cdptr[3] = cpu_to_le64(cfg->cd.mair);
}
/* Stream table manipulation functions */
static void
arm_smmu_write_strtab_l1_desc(__le64 *dst, struct arm_smmu_strtab_l1_desc *desc)
{
u64 val = 0;
val |= FIELD_PREP(STRTAB_L1_DESC_SPAN, desc->span);
val |= desc->l2ptr_dma & STRTAB_L1_DESC_L2PTR_MASK;
*dst = cpu_to_le64(val);
}
static void arm_smmu_sync_ste_for_sid(struct arm_smmu_device *smmu, u32 sid)
{
struct arm_smmu_cmdq_ent cmd = {
.opcode = CMDQ_OP_CFGI_STE,
.cfgi = {
.sid = sid,
.leaf = true,
},
};
arm_smmu_cmdq_issue_cmd(smmu, &cmd);
arm_smmu_cmdq_issue_sync(smmu);
}
static void arm_smmu_write_strtab_ent(struct arm_smmu_master *master, u32 sid,
__le64 *dst)
{
/*
* This is hideously complicated, but we only really care about
* three cases at the moment:
*
* 1. Invalid (all zero) -> bypass/fault (init)
* 2. Bypass/fault -> translation/bypass (attach)
* 3. Translation/bypass -> bypass/fault (detach)
*
* Given that we can't update the STE atomically and the SMMU
* doesn't read the thing in a defined order, that leaves us
* with the following maintenance requirements:
*
* 1. Update Config, return (init time STEs aren't live)
* 2. Write everything apart from dword 0, sync, write dword 0, sync
* 3. Update Config, sync
*/
u64 val = le64_to_cpu(dst[0]);
bool ste_live = false;
struct arm_smmu_device *smmu = NULL;
struct arm_smmu_s1_cfg *s1_cfg = NULL;
struct arm_smmu_s2_cfg *s2_cfg = NULL;
struct arm_smmu_domain *smmu_domain = NULL;
struct arm_smmu_cmdq_ent prefetch_cmd = {
.opcode = CMDQ_OP_PREFETCH_CFG,
.prefetch = {
.sid = sid,
},
};
if (master) {
smmu_domain = master->domain;
smmu = master->smmu;
}
if (smmu_domain) {
switch (smmu_domain->stage) {
case ARM_SMMU_DOMAIN_S1:
s1_cfg = &smmu_domain->s1_cfg;
break;
case ARM_SMMU_DOMAIN_S2:
case ARM_SMMU_DOMAIN_NESTED:
s2_cfg = &smmu_domain->s2_cfg;
break;
default:
break;
}
}
if (val & STRTAB_STE_0_V) {
switch (FIELD_GET(STRTAB_STE_0_CFG, val)) {
case STRTAB_STE_0_CFG_BYPASS:
break;
case STRTAB_STE_0_CFG_S1_TRANS:
case STRTAB_STE_0_CFG_S2_TRANS:
ste_live = true;
break;
case STRTAB_STE_0_CFG_ABORT:
BUG_ON(!disable_bypass);
break;
default:
BUG(); /* STE corruption */
}
}
/* Nuke the existing STE_0 value, as we're going to rewrite it */
val = STRTAB_STE_0_V;
/* Bypass/fault */
if (!smmu_domain || !(s1_cfg || s2_cfg)) {
if (!smmu_domain && disable_bypass)
val |= FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_ABORT);
else
val |= FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_BYPASS);
dst[0] = cpu_to_le64(val);
dst[1] = cpu_to_le64(FIELD_PREP(STRTAB_STE_1_SHCFG,
STRTAB_STE_1_SHCFG_INCOMING));
dst[2] = 0; /* Nuke the VMID */
/*
* The SMMU can perform negative caching, so we must sync
* the STE regardless of whether the old value was live.
*/
if (smmu)
arm_smmu_sync_ste_for_sid(smmu, sid);
return;
}
if (s1_cfg) {
BUG_ON(ste_live);
dst[1] = cpu_to_le64(
FIELD_PREP(STRTAB_STE_1_S1CIR, STRTAB_STE_1_S1C_CACHE_WBRA) |
FIELD_PREP(STRTAB_STE_1_S1COR, STRTAB_STE_1_S1C_CACHE_WBRA) |
FIELD_PREP(STRTAB_STE_1_S1CSH, ARM_SMMU_SH_ISH) |
FIELD_PREP(STRTAB_STE_1_STRW, STRTAB_STE_1_STRW_NSEL1));
if (smmu->features & ARM_SMMU_FEAT_STALLS &&
!(smmu->features & ARM_SMMU_FEAT_STALL_FORCE))
dst[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD);
val |= (s1_cfg->cdptr_dma & STRTAB_STE_0_S1CTXPTR_MASK) |
FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S1_TRANS);
}
if (s2_cfg) {
BUG_ON(ste_live);
dst[2] = cpu_to_le64(
FIELD_PREP(STRTAB_STE_2_S2VMID, s2_cfg->vmid) |
FIELD_PREP(STRTAB_STE_2_VTCR, s2_cfg->vtcr) |
#ifdef __BIG_ENDIAN
STRTAB_STE_2_S2ENDI |
#endif
STRTAB_STE_2_S2PTW | STRTAB_STE_2_S2AA64 |
STRTAB_STE_2_S2R);
dst[3] = cpu_to_le64(s2_cfg->vttbr & STRTAB_STE_3_S2TTB_MASK);
val |= FIELD_PREP(STRTAB_STE_0_CFG, STRTAB_STE_0_CFG_S2_TRANS);
}
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
if (master->ats_enabled)
dst[1] |= cpu_to_le64(FIELD_PREP(STRTAB_STE_1_EATS,
STRTAB_STE_1_EATS_TRANS));
arm_smmu_sync_ste_for_sid(smmu, sid);
dst[0] = cpu_to_le64(val);
arm_smmu_sync_ste_for_sid(smmu, sid);
/* It's likely that we'll want to use the new STE soon */
if (!(smmu->options & ARM_SMMU_OPT_SKIP_PREFETCH))
arm_smmu_cmdq_issue_cmd(smmu, &prefetch_cmd);
}
static void arm_smmu_init_bypass_stes(u64 *strtab, unsigned int nent)
{
unsigned int i;
for (i = 0; i < nent; ++i) {
arm_smmu_write_strtab_ent(NULL, -1, strtab);
strtab += STRTAB_STE_DWORDS;
}
}
static int arm_smmu_init_l2_strtab(struct arm_smmu_device *smmu, u32 sid)
{
size_t size;
void *strtab;
struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
struct arm_smmu_strtab_l1_desc *desc = &cfg->l1_desc[sid >> STRTAB_SPLIT];
if (desc->l2ptr)
return 0;
size = 1 << (STRTAB_SPLIT + ilog2(STRTAB_STE_DWORDS) + 3);
strtab = &cfg->strtab[(sid >> STRTAB_SPLIT) * STRTAB_L1_DESC_DWORDS];
desc->span = STRTAB_SPLIT + 1;
desc->l2ptr = dmam_alloc_coherent(smmu->dev, size, &desc->l2ptr_dma,
GFP_KERNEL | __GFP_ZERO);
if (!desc->l2ptr) {
dev_err(smmu->dev,
"failed to allocate l2 stream table for SID %u\n",
sid);
return -ENOMEM;
}
arm_smmu_init_bypass_stes(desc->l2ptr, 1 << STRTAB_SPLIT);
arm_smmu_write_strtab_l1_desc(strtab, desc);
return 0;
}
/* IRQ and event handlers */
static irqreturn_t arm_smmu_evtq_thread(int irq, void *dev)
{
int i;
struct arm_smmu_device *smmu = dev;
struct arm_smmu_queue *q = &smmu->evtq.q;
struct arm_smmu_ll_queue *llq = &q->llq;
u64 evt[EVTQ_ENT_DWORDS];
do {
while (!queue_remove_raw(q, evt)) {
u8 id = FIELD_GET(EVTQ_0_ID, evt[0]);
dev_info(smmu->dev, "event 0x%02x received:\n", id);
for (i = 0; i < ARRAY_SIZE(evt); ++i)
dev_info(smmu->dev, "\t0x%016llx\n",
(unsigned long long)evt[i]);
}
/*
* Not much we can do on overflow, so scream and pretend we're
* trying harder.
*/
if (queue_sync_prod_in(q) == -EOVERFLOW)
dev_err(smmu->dev, "EVTQ overflow detected -- events lost\n");
} while (!queue_empty(llq));
/* Sync our overflow flag, as we believe we're up to speed */
llq->cons = Q_OVF(llq->prod) | Q_WRP(llq, llq->cons) |
Q_IDX(llq, llq->cons);
return IRQ_HANDLED;
}
static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
{
u32 sid, ssid;
u16 grpid;
bool ssv, last;
sid = FIELD_GET(PRIQ_0_SID, evt[0]);
ssv = FIELD_GET(PRIQ_0_SSID_V, evt[0]);
ssid = ssv ? FIELD_GET(PRIQ_0_SSID, evt[0]) : 0;
last = FIELD_GET(PRIQ_0_PRG_LAST, evt[0]);
grpid = FIELD_GET(PRIQ_1_PRG_IDX, evt[1]);
dev_info(smmu->dev, "unexpected PRI request received:\n");
dev_info(smmu->dev,
"\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova 0x%016llx\n",
sid, ssid, grpid, last ? "L" : "",
evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
evt[0] & PRIQ_0_PERM_READ ? "R" : "",
evt[0] & PRIQ_0_PERM_WRITE ? "W" : "",
evt[0] & PRIQ_0_PERM_EXEC ? "X" : "",
evt[1] & PRIQ_1_ADDR_MASK);
if (last) {
struct arm_smmu_cmdq_ent cmd = {
.opcode = CMDQ_OP_PRI_RESP,
.substream_valid = ssv,
.pri = {
.sid = sid,
.ssid = ssid,
.grpid = grpid,
.resp = PRI_RESP_DENY,
},
};
arm_smmu_cmdq_issue_cmd(smmu, &cmd);
}
}
static irqreturn_t arm_smmu_priq_thread(int irq, void *dev)
{
struct arm_smmu_device *smmu = dev;
struct arm_smmu_queue *q = &smmu->priq.q;
struct arm_smmu_ll_queue *llq = &q->llq;
u64 evt[PRIQ_ENT_DWORDS];
do {
while (!queue_remove_raw(q, evt))
arm_smmu_handle_ppr(smmu, evt);
if (queue_sync_prod_in(q) == -EOVERFLOW)
dev_err(smmu->dev, "PRIQ overflow detected -- requests lost\n");
} while (!queue_empty(llq));
/* Sync our overflow flag, as we believe we're up to speed */
llq->cons = Q_OVF(llq->prod) | Q_WRP(llq, llq->cons) |
Q_IDX(llq, llq->cons);
queue_sync_cons_out(q);
return IRQ_HANDLED;
}
static int arm_smmu_device_disable(struct arm_smmu_device *smmu);
static irqreturn_t arm_smmu_gerror_handler(int irq, void *dev)
{
u32 gerror, gerrorn, active;
struct arm_smmu_device *smmu = dev;
gerror = readl_relaxed(smmu->base + ARM_SMMU_GERROR);
gerrorn = readl_relaxed(smmu->base + ARM_SMMU_GERRORN);
active = gerror ^ gerrorn;
if (!(active & GERROR_ERR_MASK))
return IRQ_NONE; /* No errors pending */
dev_warn(smmu->dev,
"unexpected global error reported (0x%08x), this could be serious\n",
active);
if (active & GERROR_SFM_ERR) {
dev_err(smmu->dev, "device has entered Service Failure Mode!\n");
arm_smmu_device_disable(smmu);
}
if (active & GERROR_MSI_GERROR_ABT_ERR)
dev_warn(smmu->dev, "GERROR MSI write aborted\n");
if (active & GERROR_MSI_PRIQ_ABT_ERR)
dev_warn(smmu->dev, "PRIQ MSI write aborted\n");
if (active & GERROR_MSI_EVTQ_ABT_ERR)
dev_warn(smmu->dev, "EVTQ MSI write aborted\n");
if (active & GERROR_MSI_CMDQ_ABT_ERR)
dev_warn(smmu->dev, "CMDQ MSI write aborted\n");
if (active & GERROR_PRIQ_ABT_ERR)
dev_err(smmu->dev, "PRIQ write aborted -- events may have been lost\n");
if (active & GERROR_EVTQ_ABT_ERR)
dev_err(smmu->dev, "EVTQ write aborted -- events may have been lost\n");
if (active & GERROR_CMDQ_ERR)
arm_smmu_cmdq_skip_err(smmu);
writel(gerror, smmu->base + ARM_SMMU_GERRORN);
return IRQ_HANDLED;
}
static irqreturn_t arm_smmu_combined_irq_thread(int irq, void *dev)
{
struct arm_smmu_device *smmu = dev;
arm_smmu_evtq_thread(irq, dev);
if (smmu->features & ARM_SMMU_FEAT_PRI)
arm_smmu_priq_thread(irq, dev);
return IRQ_HANDLED;
}
static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
{
arm_smmu_gerror_handler(irq, dev);
return IRQ_WAKE_THREAD;
}
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
static void
arm_smmu_atc_inv_to_cmd(int ssid, unsigned long iova, size_t size,
struct arm_smmu_cmdq_ent *cmd)
{
size_t log2_span;
size_t span_mask;
/* ATC invalidates are always on 4096-bytes pages */
size_t inval_grain_shift = 12;
unsigned long page_start, page_end;
*cmd = (struct arm_smmu_cmdq_ent) {
.opcode = CMDQ_OP_ATC_INV,
.substream_valid = !!ssid,
.atc.ssid = ssid,
};
if (!size) {
cmd->atc.size = ATC_INV_SIZE_ALL;
return;
}
page_start = iova >> inval_grain_shift;
page_end = (iova + size - 1) >> inval_grain_shift;
/*
* In an ATS Invalidate Request, the address must be aligned on the
* range size, which must be a power of two number of page sizes. We
* thus have to choose between grossly over-invalidating the region, or
* splitting the invalidation into multiple commands. For simplicity
* we'll go with the first solution, but should refine it in the future
* if multiple commands are shown to be more efficient.
*
* Find the smallest power of two that covers the range. The most
* significant differing bit between the start and end addresses,
* fls(start ^ end), indicates the required span. For example:
*
* We want to invalidate pages [8; 11]. This is already the ideal range:
* x = 0b1000 ^ 0b1011 = 0b11
* span = 1 << fls(x) = 4
*
* To invalidate pages [7; 10], we need to invalidate [0; 15]:
* x = 0b0111 ^ 0b1010 = 0b1101
* span = 1 << fls(x) = 16
*/
log2_span = fls_long(page_start ^ page_end);
span_mask = (1ULL << log2_span) - 1;
page_start &= ~span_mask;
cmd->atc.addr = page_start << inval_grain_shift;
cmd->atc.size = log2_span;
}
static int arm_smmu_atc_inv_master(struct arm_smmu_master *master,
struct arm_smmu_cmdq_ent *cmd)
{
int i;
if (!master->ats_enabled)
return 0;
for (i = 0; i < master->num_sids; i++) {
cmd->atc.sid = master->sids[i];
arm_smmu_cmdq_issue_cmd(master->smmu, cmd);
}
return arm_smmu_cmdq_issue_sync(master->smmu);
}
static int arm_smmu_atc_inv_domain(struct arm_smmu_domain *smmu_domain,
int ssid, unsigned long iova, size_t size)
{
int ret = 0;
unsigned long flags;
struct arm_smmu_cmdq_ent cmd;
struct arm_smmu_master *master;
if (!(smmu_domain->smmu->features & ARM_SMMU_FEAT_ATS))
return 0;
/*
* Ensure that we've completed prior invalidation of the main TLBs
* before we read 'nr_ats_masters' in case of a concurrent call to
* arm_smmu_enable_ats():
*
* // unmap() // arm_smmu_enable_ats()
* TLBI+SYNC atomic_inc(&nr_ats_masters);
* smp_mb(); [...]
* atomic_read(&nr_ats_masters); pci_enable_ats() // writel()
*
* Ensures that we always see the incremented 'nr_ats_masters' count if
* ATS was enabled at the PCI device before completion of the TLBI.
*/
smp_mb();
if (!atomic_read(&smmu_domain->nr_ats_masters))
return 0;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
arm_smmu_atc_inv_to_cmd(ssid, iova, size, &cmd);
spin_lock_irqsave(&smmu_domain->devices_lock, flags);
list_for_each_entry(master, &smmu_domain->devices, domain_head)
ret |= arm_smmu_atc_inv_master(master, &cmd);
spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
return ret ? -ETIMEDOUT : 0;
}
/* IO_PGTABLE API */
static void arm_smmu_tlb_inv_context(void *cookie)
{
struct arm_smmu_domain *smmu_domain = cookie;
struct arm_smmu_device *smmu = smmu_domain->smmu;
struct arm_smmu_cmdq_ent cmd;
if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
cmd.opcode = CMDQ_OP_TLBI_NH_ASID;
cmd.tlbi.asid = smmu_domain->s1_cfg.cd.asid;
cmd.tlbi.vmid = 0;
} else {
cmd.opcode = CMDQ_OP_TLBI_S12_VMALL;
cmd.tlbi.vmid = smmu_domain->s2_cfg.vmid;
}
/*
* NOTE: when io-pgtable is in non-strict mode, we may get here with
* PTEs previously cleared by unmaps on the current CPU not yet visible
* to the SMMU. We are relying on the dma_wmb() implicit during cmd
* insertion to guarantee those are observed before the TLBI. Do be
* careful, 007.
*/
arm_smmu_cmdq_issue_cmd(smmu, &cmd);
arm_smmu_cmdq_issue_sync(smmu);
arm_smmu_atc_inv_domain(smmu_domain, 0, 0, 0);
}
static void arm_smmu_tlb_inv_range(unsigned long iova, size_t size,
size_t granule, bool leaf,
struct arm_smmu_domain *smmu_domain)
{
u64 cmds[CMDQ_BATCH_ENTRIES * CMDQ_ENT_DWORDS];
struct arm_smmu_device *smmu = smmu_domain->smmu;
unsigned long start = iova, end = iova + size;
int i = 0;
struct arm_smmu_cmdq_ent cmd = {
.tlbi = {
.leaf = leaf,
},
};
if (!size)
return;
if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
cmd.opcode = CMDQ_OP_TLBI_NH_VA;
cmd.tlbi.asid = smmu_domain->s1_cfg.cd.asid;
} else {
cmd.opcode = CMDQ_OP_TLBI_S2_IPA;
cmd.tlbi.vmid = smmu_domain->s2_cfg.vmid;
}
while (iova < end) {
if (i == CMDQ_BATCH_ENTRIES) {
arm_smmu_cmdq_issue_cmdlist(smmu, cmds, i, false);
i = 0;
}
cmd.tlbi.addr = iova;
arm_smmu_cmdq_build_cmd(&cmds[i * CMDQ_ENT_DWORDS], &cmd);
iova += granule;
i++;
}
arm_smmu_cmdq_issue_cmdlist(smmu, cmds, i, true);
/*
* Unfortunately, this can't be leaf-only since we may have
* zapped an entire table.
*/
arm_smmu_atc_inv_domain(smmu_domain, 0, start, size);
}
static void arm_smmu_tlb_inv_page_nosync(struct iommu_iotlb_gather *gather,
unsigned long iova, size_t granule,
void *cookie)
{
struct arm_smmu_domain *smmu_domain = cookie;
struct iommu_domain *domain = &smmu_domain->domain;
iommu_iotlb_gather_add_page(domain, gather, iova, granule);
}
static void arm_smmu_tlb_inv_walk(unsigned long iova, size_t size,
size_t granule, void *cookie)
{
arm_smmu_tlb_inv_range(iova, size, granule, false, cookie);
}
static void arm_smmu_tlb_inv_leaf(unsigned long iova, size_t size,
size_t granule, void *cookie)
{
arm_smmu_tlb_inv_range(iova, size, granule, true, cookie);
}
static const struct iommu_flush_ops arm_smmu_flush_ops = {
.tlb_flush_all = arm_smmu_tlb_inv_context,
.tlb_flush_walk = arm_smmu_tlb_inv_walk,
.tlb_flush_leaf = arm_smmu_tlb_inv_leaf,
.tlb_add_page = arm_smmu_tlb_inv_page_nosync,
};
/* IOMMU API */
static bool arm_smmu_capable(enum iommu_cap cap)
{
switch (cap) {
case IOMMU_CAP_CACHE_COHERENCY:
return true;
case IOMMU_CAP_NOEXEC:
return true;
default:
return false;
}
}
static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
{
struct arm_smmu_domain *smmu_domain;
if (type != IOMMU_DOMAIN_UNMANAGED &&
type != IOMMU_DOMAIN_DMA &&
type != IOMMU_DOMAIN_IDENTITY)
return NULL;
/*
* Allocate the domain and initialise some of its data structures.
* We can't really do anything meaningful until we've added a
* master.
*/
smmu_domain = kzalloc(sizeof(*smmu_domain), GFP_KERNEL);
if (!smmu_domain)
return NULL;
if (type == IOMMU_DOMAIN_DMA &&
iommu_get_dma_cookie(&smmu_domain->domain)) {
kfree(smmu_domain);
return NULL;
}
mutex_init(&smmu_domain->init_mutex);
INIT_LIST_HEAD(&smmu_domain->devices);
spin_lock_init(&smmu_domain->devices_lock);
return &smmu_domain->domain;
}
static int arm_smmu_bitmap_alloc(unsigned long *map, int span)
{
int idx, size = 1 << span;
do {
idx = find_first_zero_bit(map, size);
if (idx == size)
return -ENOSPC;
} while (test_and_set_bit(idx, map));
return idx;
}
static void arm_smmu_bitmap_free(unsigned long *map, int idx)
{
clear_bit(idx, map);
}
static void arm_smmu_domain_free(struct iommu_domain *domain)
{
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct arm_smmu_device *smmu = smmu_domain->smmu;
iommu_put_dma_cookie(domain);
free_io_pgtable_ops(smmu_domain->pgtbl_ops);
/* Free the CD and ASID, if we allocated them */
if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
struct arm_smmu_s1_cfg *cfg = &smmu_domain->s1_cfg;
if (cfg->cdptr) {
dmam_free_coherent(smmu_domain->smmu->dev,
CTXDESC_CD_DWORDS << 3,
cfg->cdptr,
cfg->cdptr_dma);
arm_smmu_bitmap_free(smmu->asid_map, cfg->cd.asid);
}
} else {
struct arm_smmu_s2_cfg *cfg = &smmu_domain->s2_cfg;
if (cfg->vmid)
arm_smmu_bitmap_free(smmu->vmid_map, cfg->vmid);
}
kfree(smmu_domain);
}
static int arm_smmu_domain_finalise_s1(struct arm_smmu_domain *smmu_domain,
struct io_pgtable_cfg *pgtbl_cfg)
{
int ret;
int asid;
struct arm_smmu_device *smmu = smmu_domain->smmu;
struct arm_smmu_s1_cfg *cfg = &smmu_domain->s1_cfg;
asid = arm_smmu_bitmap_alloc(smmu->asid_map, smmu->asid_bits);
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28 05:23:25 +08:00
if (asid < 0)
return asid;
cfg->cdptr = dmam_alloc_coherent(smmu->dev, CTXDESC_CD_DWORDS << 3,
&cfg->cdptr_dma,
GFP_KERNEL | __GFP_ZERO);
if (!cfg->cdptr) {
dev_warn(smmu->dev, "failed to allocate context descriptor\n");
ret = -ENOMEM;
goto out_free_asid;
}
cfg->cd.asid = (u16)asid;
cfg->cd.ttbr = pgtbl_cfg->arm_lpae_s1_cfg.ttbr[0];
cfg->cd.tcr = pgtbl_cfg->arm_lpae_s1_cfg.tcr;
cfg->cd.mair = pgtbl_cfg->arm_lpae_s1_cfg.mair[0];
return 0;
out_free_asid:
arm_smmu_bitmap_free(smmu->asid_map, asid);
return ret;
}
static int arm_smmu_domain_finalise_s2(struct arm_smmu_domain *smmu_domain,
struct io_pgtable_cfg *pgtbl_cfg)
{
int vmid;
struct arm_smmu_device *smmu = smmu_domain->smmu;
struct arm_smmu_s2_cfg *cfg = &smmu_domain->s2_cfg;
vmid = arm_smmu_bitmap_alloc(smmu->vmid_map, smmu->vmid_bits);
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28 05:23:25 +08:00
if (vmid < 0)
return vmid;
cfg->vmid = (u16)vmid;
cfg->vttbr = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
cfg->vtcr = pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
return 0;
}
static int arm_smmu_domain_finalise(struct iommu_domain *domain)
{
int ret;
unsigned long ias, oas;
enum io_pgtable_fmt fmt;
struct io_pgtable_cfg pgtbl_cfg;
struct io_pgtable_ops *pgtbl_ops;
int (*finalise_stage_fn)(struct arm_smmu_domain *,
struct io_pgtable_cfg *);
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct arm_smmu_device *smmu = smmu_domain->smmu;
if (domain->type == IOMMU_DOMAIN_IDENTITY) {
smmu_domain->stage = ARM_SMMU_DOMAIN_BYPASS;
return 0;
}
/* Restrict the stage to what we can actually support */
if (!(smmu->features & ARM_SMMU_FEAT_TRANS_S1))
smmu_domain->stage = ARM_SMMU_DOMAIN_S2;
if (!(smmu->features & ARM_SMMU_FEAT_TRANS_S2))
smmu_domain->stage = ARM_SMMU_DOMAIN_S1;
switch (smmu_domain->stage) {
case ARM_SMMU_DOMAIN_S1:
ias = (smmu->features & ARM_SMMU_FEAT_VAX) ? 52 : 48;
ias = min_t(unsigned long, ias, VA_BITS);
oas = smmu->ias;
fmt = ARM_64_LPAE_S1;
finalise_stage_fn = arm_smmu_domain_finalise_s1;
break;
case ARM_SMMU_DOMAIN_NESTED:
case ARM_SMMU_DOMAIN_S2:
ias = smmu->ias;
oas = smmu->oas;
fmt = ARM_64_LPAE_S2;
finalise_stage_fn = arm_smmu_domain_finalise_s2;
break;
default:
return -EINVAL;
}
pgtbl_cfg = (struct io_pgtable_cfg) {
.pgsize_bitmap = smmu->pgsize_bitmap,
.ias = ias,
.oas = oas,
.coherent_walk = smmu->features & ARM_SMMU_FEAT_COHERENCY,
.tlb = &arm_smmu_flush_ops,
.iommu_dev = smmu->dev,
};
if (smmu_domain->non_strict)
pgtbl_cfg.quirks |= IO_PGTABLE_QUIRK_NON_STRICT;
pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
if (!pgtbl_ops)
return -ENOMEM;
domain->pgsize_bitmap = pgtbl_cfg.pgsize_bitmap;
domain->geometry.aperture_end = (1UL << pgtbl_cfg.ias) - 1;
domain->geometry.force_aperture = true;
ret = finalise_stage_fn(smmu_domain, &pgtbl_cfg);
if (ret < 0) {
free_io_pgtable_ops(pgtbl_ops);
return ret;
}
smmu_domain->pgtbl_ops = pgtbl_ops;
return 0;
}
static __le64 *arm_smmu_get_step_for_sid(struct arm_smmu_device *smmu, u32 sid)
{
__le64 *step;
struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB) {
struct arm_smmu_strtab_l1_desc *l1_desc;
int idx;
/* Two-level walk */
idx = (sid >> STRTAB_SPLIT) * STRTAB_L1_DESC_DWORDS;
l1_desc = &cfg->l1_desc[idx];
idx = (sid & ((1 << STRTAB_SPLIT) - 1)) * STRTAB_STE_DWORDS;
step = &l1_desc->l2ptr[idx];
} else {
/* Simple linear lookup */
step = &cfg->strtab[sid * STRTAB_STE_DWORDS];
}
return step;
}
static void arm_smmu_install_ste_for_dev(struct arm_smmu_master *master)
{
int i, j;
struct arm_smmu_device *smmu = master->smmu;
for (i = 0; i < master->num_sids; ++i) {
u32 sid = master->sids[i];
__le64 *step = arm_smmu_get_step_for_sid(smmu, sid);
/* Bridged PCI devices may end up with duplicated IDs */
for (j = 0; j < i; j++)
if (master->sids[j] == sid)
break;
if (j < i)
continue;
arm_smmu_write_strtab_ent(master, sid, step);
}
}
#ifdef CONFIG_PCI_ATS
static bool arm_smmu_ats_supported(struct arm_smmu_master *master)
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
{
struct pci_dev *pdev;
struct arm_smmu_device *smmu = master->smmu;
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(master->dev);
if (!(smmu->features & ARM_SMMU_FEAT_ATS) || !dev_is_pci(master->dev) ||
!(fwspec->flags & IOMMU_FWSPEC_PCI_RC_ATS) || pci_ats_disabled())
return false;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
pdev = to_pci_dev(master->dev);
return !pdev->untrusted && pdev->ats_cap;
}
#else
static bool arm_smmu_ats_supported(struct arm_smmu_master *master)
{
return false;
}
#endif
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
static void arm_smmu_enable_ats(struct arm_smmu_master *master)
{
size_t stu;
struct pci_dev *pdev;
struct arm_smmu_device *smmu = master->smmu;
struct arm_smmu_domain *smmu_domain = master->domain;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
/* Don't enable ATS at the endpoint if it's not enabled in the STE */
if (!master->ats_enabled)
return;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
/* Smallest Translation Unit: log2 of the smallest supported granule */
stu = __ffs(smmu->pgsize_bitmap);
pdev = to_pci_dev(master->dev);
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
atomic_inc(&smmu_domain->nr_ats_masters);
arm_smmu_atc_inv_domain(smmu_domain, 0, 0, 0);
if (pci_enable_ats(pdev, stu))
dev_err(master->dev, "Failed to enable ATS (STU %zu)\n", stu);
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
}
static void arm_smmu_disable_ats(struct arm_smmu_master *master)
{
struct arm_smmu_cmdq_ent cmd;
struct arm_smmu_domain *smmu_domain = master->domain;
if (!master->ats_enabled)
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
return;
pci_disable_ats(to_pci_dev(master->dev));
/*
* Ensure ATS is disabled at the endpoint before we issue the
* ATC invalidation via the SMMU.
*/
wmb();
arm_smmu_atc_inv_to_cmd(0, 0, 0, &cmd);
arm_smmu_atc_inv_master(master, &cmd);
atomic_dec(&smmu_domain->nr_ats_masters);
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
}
static void arm_smmu_detach_dev(struct arm_smmu_master *master)
{
unsigned long flags;
struct arm_smmu_domain *smmu_domain = master->domain;
if (!smmu_domain)
return;
arm_smmu_disable_ats(master);
spin_lock_irqsave(&smmu_domain->devices_lock, flags);
list_del(&master->domain_head);
spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
master->domain = NULL;
master->ats_enabled = false;
arm_smmu_install_ste_for_dev(master);
}
static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
{
int ret = 0;
unsigned long flags;
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct arm_smmu_device *smmu;
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct arm_smmu_master *master;
if (!fwspec)
return -ENOENT;
master = fwspec->iommu_priv;
smmu = master->smmu;
arm_smmu_detach_dev(master);
mutex_lock(&smmu_domain->init_mutex);
if (!smmu_domain->smmu) {
smmu_domain->smmu = smmu;
ret = arm_smmu_domain_finalise(domain);
if (ret) {
smmu_domain->smmu = NULL;
goto out_unlock;
}
} else if (smmu_domain->smmu != smmu) {
dev_err(dev,
"cannot attach to SMMU %s (upstream of %s)\n",
dev_name(smmu_domain->smmu->dev),
dev_name(smmu->dev));
ret = -ENXIO;
goto out_unlock;
}
master->domain = smmu_domain;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
if (smmu_domain->stage != ARM_SMMU_DOMAIN_BYPASS)
master->ats_enabled = arm_smmu_ats_supported(master);
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1)
arm_smmu_write_ctx_desc(smmu, &smmu_domain->s1_cfg);
arm_smmu_install_ste_for_dev(master);
spin_lock_irqsave(&smmu_domain->devices_lock, flags);
list_add(&master->domain_head, &smmu_domain->devices);
spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
arm_smmu_enable_ats(master);
out_unlock:
mutex_unlock(&smmu_domain->init_mutex);
return ret;
}
static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
phys_addr_t paddr, size_t size, int prot)
{
struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
if (!ops)
return -ENODEV;
return ops->map(ops, iova, paddr, size, prot);
}
static size_t arm_smmu_unmap(struct iommu_domain *domain, unsigned long iova,
size_t size, struct iommu_iotlb_gather *gather)
{
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
struct io_pgtable_ops *ops = smmu_domain->pgtbl_ops;
if (!ops)
return 0;
return ops->unmap(ops, iova, size, gather);
}
static void arm_smmu_flush_iotlb_all(struct iommu_domain *domain)
{
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
if (smmu_domain->smmu)
arm_smmu_tlb_inv_context(smmu_domain);
}
static void arm_smmu_iotlb_sync(struct iommu_domain *domain,
struct iommu_iotlb_gather *gather)
{
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
arm_smmu_tlb_inv_range(gather->start, gather->end - gather->start,
gather->pgsize, true, smmu_domain);
}
static phys_addr_t
arm_smmu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova)
{
struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
if (domain->type == IOMMU_DOMAIN_IDENTITY)
return iova;
if (!ops)
return 0;
return ops->iova_to_phys(ops, iova);
}
static struct platform_driver arm_smmu_driver;
static
struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
{
struct device *dev = driver_find_device_by_fwnode(&arm_smmu_driver.driver,
fwnode);
put_device(dev);
return dev ? dev_get_drvdata(dev) : NULL;
}
static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
{
unsigned long limit = smmu->strtab_cfg.num_l1_ents;
if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB)
limit *= 1UL << STRTAB_SPLIT;
return sid < limit;
}
static struct iommu_ops arm_smmu_ops;
static int arm_smmu_add_device(struct device *dev)
{
int i, ret;
struct arm_smmu_device *smmu;
struct arm_smmu_master *master;
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct iommu_group *group;
if (!fwspec || fwspec->ops != &arm_smmu_ops)
return -ENODEV;
/*
* We _can_ actually withstand dodgy bus code re-calling add_device()
* without an intervening remove_device()/of_xlate() sequence, but
* we're not going to do so quietly...
*/
if (WARN_ON_ONCE(fwspec->iommu_priv)) {
master = fwspec->iommu_priv;
smmu = master->smmu;
} else {
smmu = arm_smmu_get_by_fwnode(fwspec->iommu_fwnode);
if (!smmu)
return -ENODEV;
master = kzalloc(sizeof(*master), GFP_KERNEL);
if (!master)
return -ENOMEM;
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
master->dev = dev;
master->smmu = smmu;
master->sids = fwspec->ids;
master->num_sids = fwspec->num_ids;
fwspec->iommu_priv = master;
}
/* Check the SIDs are in range of the SMMU and our stream table */
for (i = 0; i < master->num_sids; i++) {
u32 sid = master->sids[i];
if (!arm_smmu_sid_in_range(smmu, sid))
return -ERANGE;
/* Ensure l2 strtab is initialised */
if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB) {
ret = arm_smmu_init_l2_strtab(smmu, sid);
if (ret)
return ret;
}
}
group = iommu_group_get_for_dev(dev);
if (!IS_ERR(group)) {
iommu_group_put(group);
iommu_device_link(&smmu->iommu, dev);
}
return PTR_ERR_OR_ZERO(group);
}
static void arm_smmu_remove_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct arm_smmu_master *master;
struct arm_smmu_device *smmu;
if (!fwspec || fwspec->ops != &arm_smmu_ops)
return;
master = fwspec->iommu_priv;
smmu = master->smmu;
arm_smmu_detach_dev(master);
iommu_group_remove_device(dev);
iommu_device_unlink(&smmu->iommu, dev);
kfree(master);
iommu_fwspec_free(dev);
}
static struct iommu_group *arm_smmu_device_group(struct device *dev)
{
struct iommu_group *group;
/*
* We don't support devices sharing stream IDs other than PCI RID
* aliases, since the necessary ID-to-device lookup becomes rather
* impractical given a potential sparse 32-bit stream ID space.
*/
if (dev_is_pci(dev))
group = pci_device_group(dev);
else
group = generic_device_group(dev);
return group;
}
static int arm_smmu_domain_get_attr(struct iommu_domain *domain,
enum iommu_attr attr, void *data)
{
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
switch (domain->type) {
case IOMMU_DOMAIN_UNMANAGED:
switch (attr) {
case DOMAIN_ATTR_NESTING:
*(int *)data = (smmu_domain->stage == ARM_SMMU_DOMAIN_NESTED);
return 0;
default:
return -ENODEV;
}
break;
case IOMMU_DOMAIN_DMA:
switch (attr) {
case DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE:
*(int *)data = smmu_domain->non_strict;
return 0;
default:
return -ENODEV;
}
break;
default:
return -EINVAL;
}
}
static int arm_smmu_domain_set_attr(struct iommu_domain *domain,
enum iommu_attr attr, void *data)
{
int ret = 0;
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
mutex_lock(&smmu_domain->init_mutex);
switch (domain->type) {
case IOMMU_DOMAIN_UNMANAGED:
switch (attr) {
case DOMAIN_ATTR_NESTING:
if (smmu_domain->smmu) {
ret = -EPERM;
goto out_unlock;
}
if (*(int *)data)
smmu_domain->stage = ARM_SMMU_DOMAIN_NESTED;
else
smmu_domain->stage = ARM_SMMU_DOMAIN_S1;
break;
default:
ret = -ENODEV;
}
break;
case IOMMU_DOMAIN_DMA:
switch(attr) {
case DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE:
smmu_domain->non_strict = *(int *)data;
break;
default:
ret = -ENODEV;
}
break;
default:
ret = -EINVAL;
}
out_unlock:
mutex_unlock(&smmu_domain->init_mutex);
return ret;
}
static int arm_smmu_of_xlate(struct device *dev, struct of_phandle_args *args)
{
return iommu_fwspec_add_ids(dev, args->args, 1);
}
static void arm_smmu_get_resv_regions(struct device *dev,
struct list_head *head)
{
struct iommu_resv_region *region;
int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
region = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH,
iommu: Disambiguate MSI region types The introduction of reserved regions has left a couple of rough edges which we could do with sorting out sooner rather than later. Since we are not yet addressing the potential dynamic aspect of software-managed reservations and presenting them at arbitrary fixed addresses, it is incongruous that we end up displaying hardware vs. software-managed MSI regions to userspace differently, especially since ARM-based systems may actually require one or the other, or even potentially both at once, (which iommu-dma currently has no hope of dealing with at all). Let's resolve the former user-visible inconsistency ASAP before the ABI has been baked into a kernel release, in a way that also lays the groundwork for the latter shortcoming to be addressed by follow-up patches. For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use IOMMU_RESV_MSI to describe the hardware type, and document everything a little bit. Since the x86 MSI remapping hardware falls squarely under this meaning of IOMMU_RESV_MSI, apply that type to their regions as well, so that we tell the same story to userspace across all platforms. Secondly, as the various region types require quite different handling, and it really makes little sense to ever try combining them, convert the bitfield-esque #defines to a plain enum in the process before anyone gets the wrong impression. Fixes: d30ddcaa7b02 ("iommu: Add a new type field in iommu_resv_region") Reviewed-by: Eric Auger <eric.auger@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: David Woodhouse <dwmw2@infradead.org> CC: kvm@vger.kernel.org Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-17 01:00:16 +08:00
prot, IOMMU_RESV_SW_MSI);
if (!region)
return;
list_add_tail(&region->list, head);
iommu_dma_get_resv_regions(dev, head);
}
static void arm_smmu_put_resv_regions(struct device *dev,
struct list_head *head)
{
struct iommu_resv_region *entry, *next;
list_for_each_entry_safe(entry, next, head, list)
kfree(entry);
}
static struct iommu_ops arm_smmu_ops = {
.capable = arm_smmu_capable,
.domain_alloc = arm_smmu_domain_alloc,
.domain_free = arm_smmu_domain_free,
.attach_dev = arm_smmu_attach_dev,
.map = arm_smmu_map,
.unmap = arm_smmu_unmap,
.flush_iotlb_all = arm_smmu_flush_iotlb_all,
.iotlb_sync = arm_smmu_iotlb_sync,
.iova_to_phys = arm_smmu_iova_to_phys,
.add_device = arm_smmu_add_device,
.remove_device = arm_smmu_remove_device,
.device_group = arm_smmu_device_group,
.domain_get_attr = arm_smmu_domain_get_attr,
.domain_set_attr = arm_smmu_domain_set_attr,
.of_xlate = arm_smmu_of_xlate,
.get_resv_regions = arm_smmu_get_resv_regions,
.put_resv_regions = arm_smmu_put_resv_regions,
.pgsize_bitmap = -1UL, /* Restricted during device attach */
};
/* Probing and initialisation functions */
static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
struct arm_smmu_queue *q,
unsigned long prod_off,
unsigned long cons_off,
size_t dwords, const char *name)
{
size_t qsz;
do {
qsz = ((1 << q->llq.max_n_shift) * dwords) << 3;
q->base = dmam_alloc_coherent(smmu->dev, qsz, &q->base_dma,
GFP_KERNEL);
if (q->base || qsz < PAGE_SIZE)
break;
q->llq.max_n_shift--;
} while (1);
if (!q->base) {
dev_err(smmu->dev,
"failed to allocate queue (0x%zx bytes) for %s\n",
qsz, name);
return -ENOMEM;
}
if (!WARN_ON(q->base_dma & (qsz - 1))) {
dev_info(smmu->dev, "allocated %u entries for %s\n",
1 << q->llq.max_n_shift, name);
}
q->prod_reg = arm_smmu_page1_fixup(prod_off, smmu);
q->cons_reg = arm_smmu_page1_fixup(cons_off, smmu);
q->ent_dwords = dwords;
q->q_base = Q_BASE_RWA;
q->q_base |= q->base_dma & Q_BASE_ADDR_MASK;
q->q_base |= FIELD_PREP(Q_BASE_LOG2SIZE, q->llq.max_n_shift);
q->llq.prod = q->llq.cons = 0;
return 0;
}
static void arm_smmu_cmdq_free_bitmap(void *data)
{
unsigned long *bitmap = data;
bitmap_free(bitmap);
}
static int arm_smmu_cmdq_init(struct arm_smmu_device *smmu)
{
int ret = 0;
struct arm_smmu_cmdq *cmdq = &smmu->cmdq;
unsigned int nents = 1 << cmdq->q.llq.max_n_shift;
atomic_long_t *bitmap;
atomic_set(&cmdq->owner_prod, 0);
atomic_set(&cmdq->lock, 0);
bitmap = (atomic_long_t *)bitmap_zalloc(nents, GFP_KERNEL);
if (!bitmap) {
dev_err(smmu->dev, "failed to allocate cmdq bitmap\n");
ret = -ENOMEM;
} else {
cmdq->valid_map = bitmap;
devm_add_action(smmu->dev, arm_smmu_cmdq_free_bitmap, bitmap);
}
return ret;
}
static int arm_smmu_init_queues(struct arm_smmu_device *smmu)
{
int ret;
/* cmdq */
ret = arm_smmu_init_one_queue(smmu, &smmu->cmdq.q, ARM_SMMU_CMDQ_PROD,
ARM_SMMU_CMDQ_CONS, CMDQ_ENT_DWORDS,
"cmdq");
if (ret)
return ret;
ret = arm_smmu_cmdq_init(smmu);
if (ret)
return ret;
/* evtq */
ret = arm_smmu_init_one_queue(smmu, &smmu->evtq.q, ARM_SMMU_EVTQ_PROD,
ARM_SMMU_EVTQ_CONS, EVTQ_ENT_DWORDS,
"evtq");
if (ret)
return ret;
/* priq */
if (!(smmu->features & ARM_SMMU_FEAT_PRI))
return 0;
return arm_smmu_init_one_queue(smmu, &smmu->priq.q, ARM_SMMU_PRIQ_PROD,
ARM_SMMU_PRIQ_CONS, PRIQ_ENT_DWORDS,
"priq");
}
static int arm_smmu_init_l1_strtab(struct arm_smmu_device *smmu)
{
unsigned int i;
struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
size_t size = sizeof(*cfg->l1_desc) * cfg->num_l1_ents;
void *strtab = smmu->strtab_cfg.strtab;
cfg->l1_desc = devm_kzalloc(smmu->dev, size, GFP_KERNEL);
if (!cfg->l1_desc) {
dev_err(smmu->dev, "failed to allocate l1 stream table desc\n");
return -ENOMEM;
}
for (i = 0; i < cfg->num_l1_ents; ++i) {
arm_smmu_write_strtab_l1_desc(strtab, &cfg->l1_desc[i]);
strtab += STRTAB_L1_DESC_DWORDS << 3;
}
return 0;
}
static int arm_smmu_init_strtab_2lvl(struct arm_smmu_device *smmu)
{
void *strtab;
u64 reg;
u32 size, l1size;
struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
/* Calculate the L1 size, capped to the SIDSIZE. */
size = STRTAB_L1_SZ_SHIFT - (ilog2(STRTAB_L1_DESC_DWORDS) + 3);
size = min(size, smmu->sid_bits - STRTAB_SPLIT);
cfg->num_l1_ents = 1 << size;
size += STRTAB_SPLIT;
if (size < smmu->sid_bits)
dev_warn(smmu->dev,
"2-level strtab only covers %u/%u bits of SID\n",
size, smmu->sid_bits);
l1size = cfg->num_l1_ents * (STRTAB_L1_DESC_DWORDS << 3);
strtab = dmam_alloc_coherent(smmu->dev, l1size, &cfg->strtab_dma,
GFP_KERNEL | __GFP_ZERO);
if (!strtab) {
dev_err(smmu->dev,
"failed to allocate l1 stream table (%u bytes)\n",
size);
return -ENOMEM;
}
cfg->strtab = strtab;
/* Configure strtab_base_cfg for 2 levels */
reg = FIELD_PREP(STRTAB_BASE_CFG_FMT, STRTAB_BASE_CFG_FMT_2LVL);
reg |= FIELD_PREP(STRTAB_BASE_CFG_LOG2SIZE, size);
reg |= FIELD_PREP(STRTAB_BASE_CFG_SPLIT, STRTAB_SPLIT);
cfg->strtab_base_cfg = reg;
return arm_smmu_init_l1_strtab(smmu);
}
static int arm_smmu_init_strtab_linear(struct arm_smmu_device *smmu)
{
void *strtab;
u64 reg;
u32 size;
struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
size = (1 << smmu->sid_bits) * (STRTAB_STE_DWORDS << 3);
strtab = dmam_alloc_coherent(smmu->dev, size, &cfg->strtab_dma,
GFP_KERNEL | __GFP_ZERO);
if (!strtab) {
dev_err(smmu->dev,
"failed to allocate linear stream table (%u bytes)\n",
size);
return -ENOMEM;
}
cfg->strtab = strtab;
cfg->num_l1_ents = 1 << smmu->sid_bits;
/* Configure strtab_base_cfg for a linear table covering all SIDs */
reg = FIELD_PREP(STRTAB_BASE_CFG_FMT, STRTAB_BASE_CFG_FMT_LINEAR);
reg |= FIELD_PREP(STRTAB_BASE_CFG_LOG2SIZE, smmu->sid_bits);
cfg->strtab_base_cfg = reg;
arm_smmu_init_bypass_stes(strtab, cfg->num_l1_ents);
return 0;
}
static int arm_smmu_init_strtab(struct arm_smmu_device *smmu)
{
u64 reg;
int ret;
if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB)
ret = arm_smmu_init_strtab_2lvl(smmu);
else
ret = arm_smmu_init_strtab_linear(smmu);
if (ret)
return ret;
/* Set the strtab base address */
reg = smmu->strtab_cfg.strtab_dma & STRTAB_BASE_ADDR_MASK;
reg |= STRTAB_BASE_RA;
smmu->strtab_cfg.strtab_base = reg;
/* Allocate the first VMID for stage-2 bypass STEs */
set_bit(0, smmu->vmid_map);
return 0;
}
static int arm_smmu_init_structures(struct arm_smmu_device *smmu)
{
int ret;
ret = arm_smmu_init_queues(smmu);
if (ret)
return ret;
return arm_smmu_init_strtab(smmu);
}
static int arm_smmu_write_reg_sync(struct arm_smmu_device *smmu, u32 val,
unsigned int reg_off, unsigned int ack_off)
{
u32 reg;
writel_relaxed(val, smmu->base + reg_off);
return readl_relaxed_poll_timeout(smmu->base + ack_off, reg, reg == val,
1, ARM_SMMU_POLL_TIMEOUT_US);
}
/* GBPA is "special" */
static int arm_smmu_update_gbpa(struct arm_smmu_device *smmu, u32 set, u32 clr)
{
int ret;
u32 reg, __iomem *gbpa = smmu->base + ARM_SMMU_GBPA;
ret = readl_relaxed_poll_timeout(gbpa, reg, !(reg & GBPA_UPDATE),
1, ARM_SMMU_POLL_TIMEOUT_US);
if (ret)
return ret;
reg &= ~clr;
reg |= set;
writel_relaxed(reg | GBPA_UPDATE, gbpa);
ret = readl_relaxed_poll_timeout(gbpa, reg, !(reg & GBPA_UPDATE),
1, ARM_SMMU_POLL_TIMEOUT_US);
if (ret)
dev_err(smmu->dev, "GBPA not responding to update\n");
return ret;
}
static void arm_smmu_free_msis(void *data)
{
struct device *dev = data;
platform_msi_domain_free_irqs(dev);
}
static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
{
phys_addr_t doorbell;
struct device *dev = msi_desc_to_dev(desc);
struct arm_smmu_device *smmu = dev_get_drvdata(dev);
phys_addr_t *cfg = arm_smmu_msi_cfg[desc->platform.msi_index];
doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo;
doorbell &= MSI_CFG0_ADDR_MASK;
writeq_relaxed(doorbell, smmu->base + cfg[0]);
writel_relaxed(msg->data, smmu->base + cfg[1]);
writel_relaxed(ARM_SMMU_MEMATTR_DEVICE_nGnRE, smmu->base + cfg[2]);
}
static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
{
struct msi_desc *desc;
int ret, nvec = ARM_SMMU_MAX_MSIS;
struct device *dev = smmu->dev;
/* Clear the MSI address regs */
writeq_relaxed(0, smmu->base + ARM_SMMU_GERROR_IRQ_CFG0);
writeq_relaxed(0, smmu->base + ARM_SMMU_EVTQ_IRQ_CFG0);
if (smmu->features & ARM_SMMU_FEAT_PRI)
writeq_relaxed(0, smmu->base + ARM_SMMU_PRIQ_IRQ_CFG0);
else
nvec--;
if (!(smmu->features & ARM_SMMU_FEAT_MSI))
return;
if (!dev->msi_domain) {
dev_info(smmu->dev, "msi_domain absent - falling back to wired irqs\n");
return;
}
/* Allocate MSIs for evtq, gerror and priq. Ignore cmdq */
ret = platform_msi_domain_alloc_irqs(dev, nvec, arm_smmu_write_msi_msg);
if (ret) {
dev_warn(dev, "failed to allocate MSIs - falling back to wired irqs\n");
return;
}
for_each_msi_entry(desc, dev) {
switch (desc->platform.msi_index) {
case EVTQ_MSI_INDEX:
smmu->evtq.q.irq = desc->irq;
break;
case GERROR_MSI_INDEX:
smmu->gerr_irq = desc->irq;
break;
case PRIQ_MSI_INDEX:
smmu->priq.q.irq = desc->irq;
break;
default: /* Unknown */
continue;
}
}
/* Add callback to free MSIs on teardown */
devm_add_action(dev, arm_smmu_free_msis, dev);
}
static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
{
int irq, ret;
arm_smmu_setup_msis(smmu);
/* Request interrupt lines */
irq = smmu->evtq.q.irq;
if (irq) {
ret = devm_request_threaded_irq(smmu->dev, irq, NULL,
arm_smmu_evtq_thread,
IRQF_ONESHOT,
"arm-smmu-v3-evtq", smmu);
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28 05:23:25 +08:00
if (ret < 0)
dev_warn(smmu->dev, "failed to enable evtq irq\n");
} else {
dev_warn(smmu->dev, "no evtq irq - events will not be reported!\n");
}
irq = smmu->gerr_irq;
if (irq) {
ret = devm_request_irq(smmu->dev, irq, arm_smmu_gerror_handler,
0, "arm-smmu-v3-gerror", smmu);
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28 05:23:25 +08:00
if (ret < 0)
dev_warn(smmu->dev, "failed to enable gerror irq\n");
} else {
dev_warn(smmu->dev, "no gerr irq - errors will not be reported!\n");
}
if (smmu->features & ARM_SMMU_FEAT_PRI) {
irq = smmu->priq.q.irq;
if (irq) {
ret = devm_request_threaded_irq(smmu->dev, irq, NULL,
arm_smmu_priq_thread,
IRQF_ONESHOT,
"arm-smmu-v3-priq",
smmu);
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28 05:23:25 +08:00
if (ret < 0)
dev_warn(smmu->dev,
"failed to enable priq irq\n");
} else {
dev_warn(smmu->dev, "no priq irq - PRI will be broken\n");
}
}
}
static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
{
int ret, irq;
u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
/* Disable IRQs first */
ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
ARM_SMMU_IRQ_CTRLACK);
if (ret) {
dev_err(smmu->dev, "failed to disable irqs\n");
return ret;
}
irq = smmu->combined_irq;
if (irq) {
/*
* Cavium ThunderX2 implementation doesn't support unique irq
* lines. Use a single irq line for all the SMMUv3 interrupts.
*/
ret = devm_request_threaded_irq(smmu->dev, irq,
arm_smmu_combined_irq_handler,
arm_smmu_combined_irq_thread,
IRQF_ONESHOT,
"arm-smmu-v3-combined-irq", smmu);
if (ret < 0)
dev_warn(smmu->dev, "failed to enable combined irq\n");
} else
arm_smmu_setup_unique_irqs(smmu);
if (smmu->features & ARM_SMMU_FEAT_PRI)
irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
/* Enable interrupt generation on the SMMU */
ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
if (ret)
dev_warn(smmu->dev, "failed to enable irqs\n");
return 0;
}
static int arm_smmu_device_disable(struct arm_smmu_device *smmu)
{
int ret;
ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_CR0, ARM_SMMU_CR0ACK);
if (ret)
dev_err(smmu->dev, "failed to clear cr0\n");
return ret;
}
static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
{
int ret;
u32 reg, enables;
struct arm_smmu_cmdq_ent cmd;
/* Clear CR0 and sync (disables SMMU and queue processing) */
reg = readl_relaxed(smmu->base + ARM_SMMU_CR0);
if (reg & CR0_SMMUEN) {
dev_warn(smmu->dev, "SMMU currently enabled! Resetting...\n");
WARN_ON(is_kdump_kernel() && !disable_bypass);
arm_smmu_update_gbpa(smmu, GBPA_ABORT, 0);
}
ret = arm_smmu_device_disable(smmu);
if (ret)
return ret;
/* CR1 (table and queue memory attributes) */
reg = FIELD_PREP(CR1_TABLE_SH, ARM_SMMU_SH_ISH) |
FIELD_PREP(CR1_TABLE_OC, CR1_CACHE_WB) |
FIELD_PREP(CR1_TABLE_IC, CR1_CACHE_WB) |
FIELD_PREP(CR1_QUEUE_SH, ARM_SMMU_SH_ISH) |
FIELD_PREP(CR1_QUEUE_OC, CR1_CACHE_WB) |
FIELD_PREP(CR1_QUEUE_IC, CR1_CACHE_WB);
writel_relaxed(reg, smmu->base + ARM_SMMU_CR1);
/* CR2 (random crap) */
reg = CR2_PTM | CR2_RECINVSID | CR2_E2H;
writel_relaxed(reg, smmu->base + ARM_SMMU_CR2);
/* Stream table */
writeq_relaxed(smmu->strtab_cfg.strtab_base,
smmu->base + ARM_SMMU_STRTAB_BASE);
writel_relaxed(smmu->strtab_cfg.strtab_base_cfg,
smmu->base + ARM_SMMU_STRTAB_BASE_CFG);
/* Command queue */
writeq_relaxed(smmu->cmdq.q.q_base, smmu->base + ARM_SMMU_CMDQ_BASE);
writel_relaxed(smmu->cmdq.q.llq.prod, smmu->base + ARM_SMMU_CMDQ_PROD);
writel_relaxed(smmu->cmdq.q.llq.cons, smmu->base + ARM_SMMU_CMDQ_CONS);
enables = CR0_CMDQEN;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
ARM_SMMU_CR0ACK);
if (ret) {
dev_err(smmu->dev, "failed to enable command queue\n");
return ret;
}
/* Invalidate any cached configuration */
cmd.opcode = CMDQ_OP_CFGI_ALL;
arm_smmu_cmdq_issue_cmd(smmu, &cmd);
arm_smmu_cmdq_issue_sync(smmu);
/* Invalidate any stale TLB entries */
if (smmu->features & ARM_SMMU_FEAT_HYP) {
cmd.opcode = CMDQ_OP_TLBI_EL2_ALL;
arm_smmu_cmdq_issue_cmd(smmu, &cmd);
}
cmd.opcode = CMDQ_OP_TLBI_NSNH_ALL;
arm_smmu_cmdq_issue_cmd(smmu, &cmd);
arm_smmu_cmdq_issue_sync(smmu);
/* Event queue */
writeq_relaxed(smmu->evtq.q.q_base, smmu->base + ARM_SMMU_EVTQ_BASE);
writel_relaxed(smmu->evtq.q.llq.prod,
arm_smmu_page1_fixup(ARM_SMMU_EVTQ_PROD, smmu));
writel_relaxed(smmu->evtq.q.llq.cons,
arm_smmu_page1_fixup(ARM_SMMU_EVTQ_CONS, smmu));
enables |= CR0_EVTQEN;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
ARM_SMMU_CR0ACK);
if (ret) {
dev_err(smmu->dev, "failed to enable event queue\n");
return ret;
}
/* PRI queue */
if (smmu->features & ARM_SMMU_FEAT_PRI) {
writeq_relaxed(smmu->priq.q.q_base,
smmu->base + ARM_SMMU_PRIQ_BASE);
writel_relaxed(smmu->priq.q.llq.prod,
arm_smmu_page1_fixup(ARM_SMMU_PRIQ_PROD, smmu));
writel_relaxed(smmu->priq.q.llq.cons,
arm_smmu_page1_fixup(ARM_SMMU_PRIQ_CONS, smmu));
enables |= CR0_PRIQEN;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
ARM_SMMU_CR0ACK);
if (ret) {
dev_err(smmu->dev, "failed to enable PRI queue\n");
return ret;
}
}
iommu/arm-smmu-v3: Add support for PCI ATS PCIe devices can implement their own TLB, named Address Translation Cache (ATC). Enable Address Translation Service (ATS) for devices that support it and send them invalidation requests whenever we invalidate the IOTLBs. ATC invalidation is allowed to take up to 90 seconds, according to the PCIe spec, so it is possible to get a SMMU command queue timeout during normal operations. However we expect implementations to complete invalidation in reasonable time. We only enable ATS for "trusted" devices, and currently rely on the pci_dev->untrusted bit. For ATS we have to trust that: (a) The device doesn't issue "translated" memory requests for addresses that weren't returned by the SMMU in a Translation Completion. In particular, if we give control of a device or device partition to a VM or userspace, software cannot program the device to access arbitrary "translated" addresses. (b) The device follows permissions granted by the SMMU in a Translation Completion. If the device requested read+write permission and only got read, then it doesn't write. (c) The device doesn't send Translated transactions for an address that was invalidated by an ATC invalidation. Note that the PCIe specification explicitly requires all of these, so we can assume that implementations will cleanly shield ATCs from software. All ATS translated requests still go through the SMMU, to walk the stream table and check that the device is actually allowed to send translated requests. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-18 02:24:47 +08:00
if (smmu->features & ARM_SMMU_FEAT_ATS) {
enables |= CR0_ATSCHK;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
ARM_SMMU_CR0ACK);
if (ret) {
dev_err(smmu->dev, "failed to enable ATS check\n");
return ret;
}
}
ret = arm_smmu_setup_irqs(smmu);
if (ret) {
dev_err(smmu->dev, "failed to setup irqs\n");
return ret;
}
if (is_kdump_kernel())
enables &= ~(CR0_EVTQEN | CR0_PRIQEN);
/* Enable the SMMU interface, or ensure bypass */
if (!bypass || disable_bypass) {
enables |= CR0_SMMUEN;
} else {
ret = arm_smmu_update_gbpa(smmu, 0, GBPA_ABORT);
if (ret)
return ret;
}
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
ARM_SMMU_CR0ACK);
if (ret) {
dev_err(smmu->dev, "failed to enable SMMU interface\n");
return ret;
}
return 0;
}
static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
{
u32 reg;
bool coherent = smmu->features & ARM_SMMU_FEAT_COHERENCY;
/* IDR0 */
reg = readl_relaxed(smmu->base + ARM_SMMU_IDR0);
/* 2-level structures */
if (FIELD_GET(IDR0_ST_LVL, reg) == IDR0_ST_LVL_2LVL)
smmu->features |= ARM_SMMU_FEAT_2_LVL_STRTAB;
if (reg & IDR0_CD2L)
smmu->features |= ARM_SMMU_FEAT_2_LVL_CDTAB;
/*
* Translation table endianness.
* We currently require the same endianness as the CPU, but this
* could be changed later by adding a new IO_PGTABLE_QUIRK.
*/
switch (FIELD_GET(IDR0_TTENDIAN, reg)) {
case IDR0_TTENDIAN_MIXED:
smmu->features |= ARM_SMMU_FEAT_TT_LE | ARM_SMMU_FEAT_TT_BE;
break;
#ifdef __BIG_ENDIAN
case IDR0_TTENDIAN_BE:
smmu->features |= ARM_SMMU_FEAT_TT_BE;
break;
#else
case IDR0_TTENDIAN_LE:
smmu->features |= ARM_SMMU_FEAT_TT_LE;
break;
#endif
default:
dev_err(smmu->dev, "unknown/unsupported TT endianness!\n");
return -ENXIO;
}
/* Boolean feature flags */
if (IS_ENABLED(CONFIG_PCI_PRI) && reg & IDR0_PRI)
smmu->features |= ARM_SMMU_FEAT_PRI;
if (IS_ENABLED(CONFIG_PCI_ATS) && reg & IDR0_ATS)
smmu->features |= ARM_SMMU_FEAT_ATS;
if (reg & IDR0_SEV)
smmu->features |= ARM_SMMU_FEAT_SEV;
if (reg & IDR0_MSI)
smmu->features |= ARM_SMMU_FEAT_MSI;
if (reg & IDR0_HYP)
smmu->features |= ARM_SMMU_FEAT_HYP;
/*
* The coherency feature as set by FW is used in preference to the ID
* register, but warn on mismatch.
*/
if (!!(reg & IDR0_COHACC) != coherent)
dev_warn(smmu->dev, "IDR0.COHACC overridden by FW configuration (%s)\n",
coherent ? "true" : "false");
switch (FIELD_GET(IDR0_STALL_MODEL, reg)) {
case IDR0_STALL_MODEL_FORCE:
smmu->features |= ARM_SMMU_FEAT_STALL_FORCE;
/* Fallthrough */
case IDR0_STALL_MODEL_STALL:
smmu->features |= ARM_SMMU_FEAT_STALLS;
}
if (reg & IDR0_S1P)
smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
if (reg & IDR0_S2P)
smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
if (!(reg & (IDR0_S1P | IDR0_S2P))) {
dev_err(smmu->dev, "no translation support!\n");
return -ENXIO;
}
/* We only support the AArch64 table format at present */
switch (FIELD_GET(IDR0_TTF, reg)) {
case IDR0_TTF_AARCH32_64:
smmu->ias = 40;
/* Fallthrough */
case IDR0_TTF_AARCH64:
break;
default:
dev_err(smmu->dev, "AArch64 table format not supported!\n");
return -ENXIO;
}
/* ASID/VMID sizes */
smmu->asid_bits = reg & IDR0_ASID16 ? 16 : 8;
smmu->vmid_bits = reg & IDR0_VMID16 ? 16 : 8;
/* IDR1 */
reg = readl_relaxed(smmu->base + ARM_SMMU_IDR1);
if (reg & (IDR1_TABLES_PRESET | IDR1_QUEUES_PRESET | IDR1_REL)) {
dev_err(smmu->dev, "embedded implementation not supported\n");
return -ENXIO;
}
/* Queue sizes, capped to ensure natural alignment */
smmu->cmdq.q.llq.max_n_shift = min_t(u32, CMDQ_MAX_SZ_SHIFT,
FIELD_GET(IDR1_CMDQS, reg));
if (smmu->cmdq.q.llq.max_n_shift <= ilog2(CMDQ_BATCH_ENTRIES)) {
/*
* We don't support splitting up batches, so one batch of
* commands plus an extra sync needs to fit inside the command
* queue. There's also no way we can handle the weird alignment
* restrictions on the base pointer for a unit-length queue.
*/
dev_err(smmu->dev, "command queue size <= %d entries not supported\n",
CMDQ_BATCH_ENTRIES);
return -ENXIO;
}
smmu->evtq.q.llq.max_n_shift = min_t(u32, EVTQ_MAX_SZ_SHIFT,
FIELD_GET(IDR1_EVTQS, reg));
smmu->priq.q.llq.max_n_shift = min_t(u32, PRIQ_MAX_SZ_SHIFT,
FIELD_GET(IDR1_PRIQS, reg));
/* SID/SSID sizes */
smmu->ssid_bits = FIELD_GET(IDR1_SSIDSIZE, reg);
smmu->sid_bits = FIELD_GET(IDR1_SIDSIZE, reg);
/*
* If the SMMU supports fewer bits than would fill a single L2 stream
* table, use a linear table instead.
*/
if (smmu->sid_bits <= STRTAB_SPLIT)
smmu->features &= ~ARM_SMMU_FEAT_2_LVL_STRTAB;
/* IDR5 */
reg = readl_relaxed(smmu->base + ARM_SMMU_IDR5);
/* Maximum number of outstanding stalls */
smmu->evtq.max_stalls = FIELD_GET(IDR5_STALL_MAX, reg);
/* Page sizes */
if (reg & IDR5_GRAN64K)
smmu->pgsize_bitmap |= SZ_64K | SZ_512M;
if (reg & IDR5_GRAN16K)
smmu->pgsize_bitmap |= SZ_16K | SZ_32M;
if (reg & IDR5_GRAN4K)
smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
/* Input address size */
if (FIELD_GET(IDR5_VAX, reg) == IDR5_VAX_52_BIT)
smmu->features |= ARM_SMMU_FEAT_VAX;
/* Output address size */
switch (FIELD_GET(IDR5_OAS, reg)) {
case IDR5_OAS_32_BIT:
smmu->oas = 32;
break;
case IDR5_OAS_36_BIT:
smmu->oas = 36;
break;
case IDR5_OAS_40_BIT:
smmu->oas = 40;
break;
case IDR5_OAS_42_BIT:
smmu->oas = 42;
break;
case IDR5_OAS_44_BIT:
smmu->oas = 44;
break;
case IDR5_OAS_52_BIT:
smmu->oas = 52;
smmu->pgsize_bitmap |= 1ULL << 42; /* 4TB */
break;
default:
dev_info(smmu->dev,
"unknown output address size. Truncating to 48-bit\n");
/* Fallthrough */
case IDR5_OAS_48_BIT:
smmu->oas = 48;
}
if (arm_smmu_ops.pgsize_bitmap == -1UL)
arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
else
arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
/* Set the DMA mask for our table walker */
if (dma_set_mask_and_coherent(smmu->dev, DMA_BIT_MASK(smmu->oas)))
dev_warn(smmu->dev,
"failed to set DMA mask for table walker\n");
smmu->ias = max(smmu->ias, smmu->oas);
dev_info(smmu->dev, "ias %lu-bit, oas %lu-bit (features 0x%08x)\n",
smmu->ias, smmu->oas, smmu->features);
return 0;
}
#ifdef CONFIG_ACPI
static void acpi_smmu_get_options(u32 model, struct arm_smmu_device *smmu)
{
switch (model) {
case ACPI_IORT_SMMU_V3_CAVIUM_CN99XX:
smmu->options |= ARM_SMMU_OPT_PAGE0_REGS_ONLY;
break;
case ACPI_IORT_SMMU_V3_HISILICON_HI161X:
smmu->options |= ARM_SMMU_OPT_SKIP_PREFETCH;
break;
}
dev_notice(smmu->dev, "option mask 0x%x\n", smmu->options);
}
static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
struct arm_smmu_device *smmu)
{
struct acpi_iort_smmu_v3 *iort_smmu;
struct device *dev = smmu->dev;
struct acpi_iort_node *node;
node = *(struct acpi_iort_node **)dev_get_platdata(dev);
/* Retrieve SMMUv3 specific data */
iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
acpi_smmu_get_options(iort_smmu->model, smmu);
if (iort_smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE)
smmu->features |= ARM_SMMU_FEAT_COHERENCY;
return 0;
}
#else
static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
struct arm_smmu_device *smmu)
{
return -ENODEV;
}
#endif
static int arm_smmu_device_dt_probe(struct platform_device *pdev,
struct arm_smmu_device *smmu)
{
struct device *dev = &pdev->dev;
u32 cells;
int ret = -EINVAL;
if (of_property_read_u32(dev->of_node, "#iommu-cells", &cells))
dev_err(dev, "missing #iommu-cells property\n");
else if (cells != 1)
dev_err(dev, "invalid #iommu-cells value (%d)\n", cells);
else
ret = 0;
parse_driver_options(smmu);
if (of_dma_is_coherent(dev->of_node))
smmu->features |= ARM_SMMU_FEAT_COHERENCY;
return ret;
}
static unsigned long arm_smmu_resource_size(struct arm_smmu_device *smmu)
{
if (smmu->options & ARM_SMMU_OPT_PAGE0_REGS_ONLY)
return SZ_64K;
else
return SZ_128K;
}
static int arm_smmu_device_probe(struct platform_device *pdev)
{
int irq, ret;
struct resource *res;
resource_size_t ioaddr;
struct arm_smmu_device *smmu;
struct device *dev = &pdev->dev;
bool bypass;
smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
if (!smmu) {
dev_err(dev, "failed to allocate arm_smmu_device\n");
return -ENOMEM;
}
smmu->dev = dev;
if (dev->of_node) {
ret = arm_smmu_device_dt_probe(pdev, smmu);
} else {
ret = arm_smmu_device_acpi_probe(pdev, smmu);
if (ret == -ENODEV)
return ret;
}
/* Set bypass mode according to firmware probing result */
bypass = !!ret;
/* Base address */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (resource_size(res) + 1 < arm_smmu_resource_size(smmu)) {
dev_err(dev, "MMIO region too small (%pr)\n", res);
return -EINVAL;
}
ioaddr = res->start;
smmu->base = devm_ioremap_resource(dev, res);
if (IS_ERR(smmu->base))
return PTR_ERR(smmu->base);
/* Interrupt lines */
irq = platform_get_irq_byname(pdev, "combined");
if (irq > 0)
smmu->combined_irq = irq;
else {
irq = platform_get_irq_byname(pdev, "eventq");
if (irq > 0)
smmu->evtq.q.irq = irq;
irq = platform_get_irq_byname(pdev, "priq");
if (irq > 0)
smmu->priq.q.irq = irq;
irq = platform_get_irq_byname(pdev, "gerror");
if (irq > 0)
smmu->gerr_irq = irq;
}
/* Probe the h/w */
ret = arm_smmu_device_hw_probe(smmu);
if (ret)
return ret;
/* Initialise in-memory data structures */
ret = arm_smmu_init_structures(smmu);
if (ret)
return ret;
/* Record our private device structure */
platform_set_drvdata(pdev, smmu);
/* Reset the device */
ret = arm_smmu_device_reset(smmu, bypass);
if (ret)
return ret;
/* And we're up. Go go go! */
ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
"smmu3.%pa", &ioaddr);
if (ret)
return ret;
iommu_device_set_ops(&smmu->iommu, &arm_smmu_ops);
iommu_device_set_fwnode(&smmu->iommu, dev->fwnode);
ret = iommu_device_register(&smmu->iommu);
if (ret) {
dev_err(dev, "Failed to register iommu\n");
return ret;
}
#ifdef CONFIG_PCI
if (pci_bus_type.iommu_ops != &arm_smmu_ops) {
pci_request_acs();
ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
if (ret)
return ret;
}
#endif
#ifdef CONFIG_ARM_AMBA
if (amba_bustype.iommu_ops != &arm_smmu_ops) {
ret = bus_set_iommu(&amba_bustype, &arm_smmu_ops);
if (ret)
return ret;
}
#endif
if (platform_bus_type.iommu_ops != &arm_smmu_ops) {
ret = bus_set_iommu(&platform_bus_type, &arm_smmu_ops);
if (ret)
return ret;
}
return 0;
}
iommu/arm-smmu: Make arm-smmu-v3 explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/iommu/Kconfig:config ARM_SMMU_V3 drivers/iommu/Kconfig: bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, but unlike most drivers, we can't delete the function tied to the ".remove" field. This is because as of commit 7aa8619a66ae ("iommu/arm-smmu-v3: Implement shutdown method") the .remove function was given a one line wrapper and re-used to provide a .shutdown service. So we delete the wrapper and re-name the function from remove to shutdown. We add a moduleparam.h include since the file does actually declare some module parameters, and leaving them as such is the easiest way currently to remain backwards compatible with existing use cases. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-02 03:19:17 +08:00
static void arm_smmu_device_shutdown(struct platform_device *pdev)
{
struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
arm_smmu_device_disable(smmu);
}
static const struct of_device_id arm_smmu_of_match[] = {
{ .compatible = "arm,smmu-v3", },
{ },
};
static struct platform_driver arm_smmu_driver = {
.driver = {
.name = "arm-smmu-v3",
.of_match_table = of_match_ptr(arm_smmu_of_match),
iommu/arm-smmu: Make arm-smmu-v3 explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/iommu/Kconfig:config ARM_SMMU_V3 drivers/iommu/Kconfig: bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, but unlike most drivers, we can't delete the function tied to the ".remove" field. This is because as of commit 7aa8619a66ae ("iommu/arm-smmu-v3: Implement shutdown method") the .remove function was given a one line wrapper and re-used to provide a .shutdown service. So we delete the wrapper and re-name the function from remove to shutdown. We add a moduleparam.h include since the file does actually declare some module parameters, and leaving them as such is the easiest way currently to remain backwards compatible with existing use cases. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-02 03:19:17 +08:00
.suppress_bind_attrs = true,
},
.probe = arm_smmu_device_probe,
.shutdown = arm_smmu_device_shutdown,
};
iommu/arm-smmu: Make arm-smmu-v3 explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/iommu/Kconfig:config ARM_SMMU_V3 drivers/iommu/Kconfig: bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, but unlike most drivers, we can't delete the function tied to the ".remove" field. This is because as of commit 7aa8619a66ae ("iommu/arm-smmu-v3: Implement shutdown method") the .remove function was given a one line wrapper and re-used to provide a .shutdown service. So we delete the wrapper and re-name the function from remove to shutdown. We add a moduleparam.h include since the file does actually declare some module parameters, and leaving them as such is the easiest way currently to remain backwards compatible with existing use cases. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-02 03:19:17 +08:00
builtin_platform_driver(arm_smmu_driver);