OpenCloudOS-Kernel/arch/alpha/kernel/ptrace.c

340 lines
9.1 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/* ptrace.c */
/* By Ross Biro 1/23/92 */
/* edited by Linus Torvalds */
/* mangled further by Bob Manson (manson@santafe.edu) */
/* more mutilation by David Mosberger (davidm@azstarnet.com) */
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/security.h>
#include <linux/signal.h>
#include <linux/audit.h>
#include <linux/uaccess.h>
#include <asm/fpu.h>
#include "proto.h"
#define DEBUG DBG_MEM
#undef DEBUG
#ifdef DEBUG
enum {
DBG_MEM = (1<<0),
DBG_BPT = (1<<1),
DBG_MEM_ALL = (1<<2)
};
#define DBG(fac,args) {if ((fac) & DEBUG) printk args;}
#else
#define DBG(fac,args)
#endif
#define BREAKINST 0x00000080 /* call_pal bpt */
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
*/
/*
* Processes always block with the following stack-layout:
*
* +================================+ <---- task + 2*PAGE_SIZE
* | PALcode saved frame (ps, pc, | ^
* | gp, a0, a1, a2) | |
* +================================+ | struct pt_regs
* | | |
* | frame generated by SAVE_ALL | |
* | | v
* +================================+
* | | ^
* | frame saved by do_switch_stack | | struct switch_stack
* | | v
* +================================+
*/
/*
* The following table maps a register index into the stack offset at
* which the register is saved. Register indices are 0-31 for integer
* regs, 32-63 for fp regs, and 64 for the pc. Notice that sp and
* zero have no stack-slot and need to be treated specially (see
* get_reg/put_reg below).
*/
enum {
REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64
};
#define PT_REG(reg) \
(PAGE_SIZE*2 - sizeof(struct pt_regs) + offsetof(struct pt_regs, reg))
#define SW_REG(reg) \
(PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
+ offsetof(struct switch_stack, reg))
alpha: lazy FPU switching On each context switch we save the FPU registers on stack of old process and restore FPU registers from the stack of new one. That allows us to avoid doing that each time we enter/leave the kernel mode; however, that can get suboptimal in some cases. For one thing, we don't need to bother saving anything for kernel threads. For another, if between entering and leaving the kernel a thread gives CPU up more than once, it will do useless work, saving the same values every time, only to discard the saved copy as soon as it returns from switch_to(). Alternative solution: * move the array we save into from switch_stack to thread_info * have a (thread-synchronous) flag set when we save them * have another flag set when they should be restored on return to userland. * do *NOT* save/restore them in do_switch_stack()/undo_switch_stack(). * restore on the exit to user mode if the restore flag had been set. Clear both flags. * on context switch, entry to fork/clone/vfork, before entry into do_signal() and on entry into straced syscall save the registers and set the 'saved' flag unless it had been already set. * on context switch set the 'restore' flag as well. * have copy_thread() set both flags for child, so the registers would be restored once the child returns to userland. * use the saved data in setup_sigcontext(); have restore_sigcontext() set both flags and copy from sigframe to save area. * teach ptrace to look for FPU registers in thread_info instead of switch_stack. * teach isolated accesses to FPU registers (rdfpcr, wrfpcr, etc.) to check the 'saved' flag (under preempt_disable()) and work with the save area if it's been set; if 'saved' flag is found upon write access, set 'restore' flag as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
2022-09-02 09:50:12 +08:00
#define FP_REG(reg) (offsetof(struct thread_info, reg))
static int regoff[] = {
PT_REG( r0), PT_REG( r1), PT_REG( r2), PT_REG( r3),
PT_REG( r4), PT_REG( r5), PT_REG( r6), PT_REG( r7),
PT_REG( r8), SW_REG( r9), SW_REG( r10), SW_REG( r11),
SW_REG( r12), SW_REG( r13), SW_REG( r14), SW_REG( r15),
PT_REG( r16), PT_REG( r17), PT_REG( r18), PT_REG( r19),
PT_REG( r20), PT_REG( r21), PT_REG( r22), PT_REG( r23),
PT_REG( r24), PT_REG( r25), PT_REG( r26), PT_REG( r27),
PT_REG( r28), PT_REG( gp), -1, -1,
alpha: lazy FPU switching On each context switch we save the FPU registers on stack of old process and restore FPU registers from the stack of new one. That allows us to avoid doing that each time we enter/leave the kernel mode; however, that can get suboptimal in some cases. For one thing, we don't need to bother saving anything for kernel threads. For another, if between entering and leaving the kernel a thread gives CPU up more than once, it will do useless work, saving the same values every time, only to discard the saved copy as soon as it returns from switch_to(). Alternative solution: * move the array we save into from switch_stack to thread_info * have a (thread-synchronous) flag set when we save them * have another flag set when they should be restored on return to userland. * do *NOT* save/restore them in do_switch_stack()/undo_switch_stack(). * restore on the exit to user mode if the restore flag had been set. Clear both flags. * on context switch, entry to fork/clone/vfork, before entry into do_signal() and on entry into straced syscall save the registers and set the 'saved' flag unless it had been already set. * on context switch set the 'restore' flag as well. * have copy_thread() set both flags for child, so the registers would be restored once the child returns to userland. * use the saved data in setup_sigcontext(); have restore_sigcontext() set both flags and copy from sigframe to save area. * teach ptrace to look for FPU registers in thread_info instead of switch_stack. * teach isolated accesses to FPU registers (rdfpcr, wrfpcr, etc.) to check the 'saved' flag (under preempt_disable()) and work with the save area if it's been set; if 'saved' flag is found upon write access, set 'restore' flag as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
2022-09-02 09:50:12 +08:00
FP_REG(fp[ 0]), FP_REG(fp[ 1]), FP_REG(fp[ 2]), FP_REG(fp[ 3]),
FP_REG(fp[ 4]), FP_REG(fp[ 5]), FP_REG(fp[ 6]), FP_REG(fp[ 7]),
FP_REG(fp[ 8]), FP_REG(fp[ 9]), FP_REG(fp[10]), FP_REG(fp[11]),
FP_REG(fp[12]), FP_REG(fp[13]), FP_REG(fp[14]), FP_REG(fp[15]),
FP_REG(fp[16]), FP_REG(fp[17]), FP_REG(fp[18]), FP_REG(fp[19]),
FP_REG(fp[20]), FP_REG(fp[21]), FP_REG(fp[22]), FP_REG(fp[23]),
FP_REG(fp[24]), FP_REG(fp[25]), FP_REG(fp[26]), FP_REG(fp[27]),
FP_REG(fp[28]), FP_REG(fp[29]), FP_REG(fp[30]), FP_REG(fp[31]),
PT_REG( pc)
};
static unsigned long zero;
/*
* Get address of register REGNO in task TASK.
*/
static unsigned long *
get_reg_addr(struct task_struct * task, unsigned long regno)
{
unsigned long *addr;
if (regno == 30) {
addr = &task_thread_info(task)->pcb.usp;
} else if (regno == 65) {
addr = &task_thread_info(task)->pcb.unique;
} else if (regno == 31 || regno > 65) {
zero = 0;
addr = &zero;
} else {
addr = task_stack_page(task) + regoff[regno];
}
return addr;
}
/*
* Get contents of register REGNO in task TASK.
*/
static unsigned long
get_reg(struct task_struct * task, unsigned long regno)
{
/* Special hack for fpcr -- combine hardware and software bits. */
if (regno == 63) {
unsigned long fpcr = *get_reg_addr(task, regno);
unsigned long swcr
= task_thread_info(task)->ieee_state & IEEE_SW_MASK;
swcr = swcr_update_status(swcr, fpcr);
return fpcr | swcr;
}
return *get_reg_addr(task, regno);
}
/*
* Write contents of register REGNO in task TASK.
*/
static int
put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
{
if (regno == 63) {
task_thread_info(task)->ieee_state
= ((task_thread_info(task)->ieee_state & ~IEEE_SW_MASK)
| (data & IEEE_SW_MASK));
data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data);
}
*get_reg_addr(task, regno) = data;
return 0;
}
static inline int
read_int(struct task_struct *task, unsigned long addr, int * data)
{
int copied = access_process_vm(task, addr, data, sizeof(int),
FOLL_FORCE);
return (copied == sizeof(int)) ? 0 : -EIO;
}
static inline int
write_int(struct task_struct *task, unsigned long addr, int data)
{
int copied = access_process_vm(task, addr, &data, sizeof(int),
FOLL_FORCE | FOLL_WRITE);
return (copied == sizeof(int)) ? 0 : -EIO;
}
/*
* Set breakpoint.
*/
int
ptrace_set_bpt(struct task_struct * child)
{
int displ, i, res, reg_b, nsaved = 0;
unsigned int insn, op_code;
unsigned long pc;
pc = get_reg(child, REG_PC);
res = read_int(child, pc, (int *) &insn);
if (res < 0)
return res;
op_code = insn >> 26;
if (op_code >= 0x30) {
/*
* It's a branch: instead of trying to figure out
* whether the branch will be taken or not, we'll put
* a breakpoint at either location. This is simpler,
* more reliable, and probably not a whole lot slower
* than the alternative approach of emulating the
* branch (emulation can be tricky for fp branches).
*/
displ = ((s32)(insn << 11)) >> 9;
task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
if (displ) /* guard against unoptimized code */
task_thread_info(child)->bpt_addr[nsaved++]
= pc + 4 + displ;
DBG(DBG_BPT, ("execing branch\n"));
} else if (op_code == 0x1a) {
reg_b = (insn >> 16) & 0x1f;
task_thread_info(child)->bpt_addr[nsaved++] = get_reg(child, reg_b);
DBG(DBG_BPT, ("execing jump\n"));
} else {
task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
DBG(DBG_BPT, ("execing normal insn\n"));
}
/* install breakpoints: */
for (i = 0; i < nsaved; ++i) {
res = read_int(child, task_thread_info(child)->bpt_addr[i],
(int *) &insn);
if (res < 0)
return res;
task_thread_info(child)->bpt_insn[i] = insn;
DBG(DBG_BPT, (" -> next_pc=%lx\n",
task_thread_info(child)->bpt_addr[i]));
res = write_int(child, task_thread_info(child)->bpt_addr[i],
BREAKINST);
if (res < 0)
return res;
}
task_thread_info(child)->bpt_nsaved = nsaved;
return 0;
}
/*
* Ensure no single-step breakpoint is pending. Returns non-zero
* value if child was being single-stepped.
*/
int
ptrace_cancel_bpt(struct task_struct * child)
{
int i, nsaved = task_thread_info(child)->bpt_nsaved;
task_thread_info(child)->bpt_nsaved = 0;
if (nsaved > 2) {
printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
nsaved = 2;
}
for (i = 0; i < nsaved; ++i) {
write_int(child, task_thread_info(child)->bpt_addr[i],
task_thread_info(child)->bpt_insn[i]);
}
return (nsaved != 0);
}
void user_enable_single_step(struct task_struct *child)
{
/* Mark single stepping. */
task_thread_info(child)->bpt_nsaved = -1;
}
void user_disable_single_step(struct task_struct *child)
{
ptrace_cancel_bpt(child);
}
/*
* Called by kernel/ptrace.c when detaching..
*
* Make sure the single step bit is not set.
*/
void ptrace_disable(struct task_struct *child)
{
user_disable_single_step(child);
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
unsigned long tmp;
size_t copied;
long ret;
switch (request) {
/* When I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
case PTRACE_PEEKDATA:
copied = ptrace_access_vm(child, addr, &tmp, sizeof(tmp),
FOLL_FORCE);
ret = -EIO;
if (copied != sizeof(tmp))
break;
force_successful_syscall_return();
ret = tmp;
break;
/* Read register number ADDR. */
case PTRACE_PEEKUSR:
force_successful_syscall_return();
ret = get_reg(child, addr);
DBG(DBG_MEM, ("peek $%lu->%#lx\n", addr, ret));
break;
/* When I and D space are separate, this will have to be fixed. */
case PTRACE_POKETEXT: /* write the word at location addr. */
case PTRACE_POKEDATA:
ret = generic_ptrace_pokedata(child, addr, data);
break;
case PTRACE_POKEUSR: /* write the specified register */
DBG(DBG_MEM, ("poke $%lu<-%#lx\n", addr, data));
ret = put_reg(child, addr, data);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
return ret;
}
asmlinkage unsigned long syscall_trace_enter(void)
{
unsigned long ret = 0;
struct pt_regs *regs = current_pt_regs();
if (test_thread_flag(TIF_SYSCALL_TRACE) &&
ptrace_report_syscall_entry(current_pt_regs()))
ret = -1UL;
audit_syscall_entry(regs->r0, regs->r16, regs->r17, regs->r18, regs->r19);
return ret ?: current_pt_regs()->r0;
}
asmlinkage void
syscall_trace_leave(void)
{
audit_syscall_exit(current_pt_regs());
if (test_thread_flag(TIF_SYSCALL_TRACE))
ptrace_report_syscall_exit(current_pt_regs(), 0);
}