OpenCloudOS-Kernel/fs/btrfs/block-group.h

336 lines
11 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef BTRFS_BLOCK_GROUP_H
#define BTRFS_BLOCK_GROUP_H
#include "free-space-cache.h"
enum btrfs_disk_cache_state {
BTRFS_DC_WRITTEN,
BTRFS_DC_ERROR,
BTRFS_DC_CLEAR,
BTRFS_DC_SETUP,
};
/*
* This describes the state of the block_group for async discard. This is due
* to the two pass nature of it where extent discarding is prioritized over
* bitmap discarding. BTRFS_DISCARD_RESET_CURSOR is set when we are resetting
* between lists to prevent contention for discard state variables
* (eg. discard_cursor).
*/
enum btrfs_discard_state {
BTRFS_DISCARD_EXTENTS,
BTRFS_DISCARD_BITMAPS,
BTRFS_DISCARD_RESET_CURSOR,
};
/*
* Control flags for do_chunk_alloc's force field CHUNK_ALLOC_NO_FORCE means to
* only allocate a chunk if we really need one.
*
* CHUNK_ALLOC_LIMITED means to only try and allocate one if we have very few
* chunks already allocated. This is used as part of the clustering code to
* help make sure we have a good pool of storage to cluster in, without filling
* the FS with empty chunks
*
* CHUNK_ALLOC_FORCE means it must try to allocate one
*/
enum btrfs_chunk_alloc_enum {
CHUNK_ALLOC_NO_FORCE,
CHUNK_ALLOC_LIMITED,
CHUNK_ALLOC_FORCE,
};
struct btrfs_caching_control {
struct list_head list;
struct mutex mutex;
wait_queue_head_t wait;
struct btrfs_work work;
struct btrfs_block_group *block_group;
u64 progress;
refcount_t count;
};
/* Once caching_thread() finds this much free space, it will wake up waiters. */
#define CACHING_CTL_WAKE_UP SZ_2M
struct btrfs_block_group {
struct btrfs_fs_info *fs_info;
struct inode *inode;
spinlock_t lock;
u64 start;
u64 length;
u64 pinned;
u64 reserved;
u64 used;
u64 delalloc_bytes;
u64 bytes_super;
u64 flags;
u64 cache_generation;
/*
* If the free space extent count exceeds this number, convert the block
* group to bitmaps.
*/
u32 bitmap_high_thresh;
/*
* If the free space extent count drops below this number, convert the
* block group back to extents.
*/
u32 bitmap_low_thresh;
/*
* It is just used for the delayed data space allocation because
* only the data space allocation and the relative metadata update
* can be done cross the transaction.
*/
struct rw_semaphore data_rwsem;
/* For raid56, this is a full stripe, without parity */
unsigned long full_stripe_len;
unsigned int ro;
unsigned int iref:1;
unsigned int has_caching_ctl:1;
unsigned int removed:1;
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 18:22:11 +08:00
unsigned int to_copy:1;
btrfs: zoned: relocate block group to repair IO failure in zoned filesystems When a bad checksum is found and if the filesystem has a mirror of the damaged data, we read the correct data from the mirror and writes it to damaged blocks. This however, violates the sequential write constraints of a zoned block device. We can consider three methods to repair an IO failure in zoned filesystems: (1) Reset and rewrite the damaged zone (2) Allocate new device extent and replace the damaged device extent to the new extent (3) Relocate the corresponding block group Method (1) is most similar to a behavior done with regular devices. However, it also wipes non-damaged data in the same device extent, and so it unnecessary degrades non-damaged data. Method (2) is much like device replacing but done in the same device. It is safe because it keeps the device extent until the replacing finish. However, extending device replacing is non-trivial. It assumes "src_dev->physical == dst_dev->physical". Also, the extent mapping replacing function should be extended to support replacing device extent position in one device. Method (3) invokes relocation of the damaged block group and is straightforward to implement. It relocates all the mirrored device extents, so it potentially is a more costly operation than method (1) or (2). But it relocates only used extents which reduce the total IO size. Let's apply method (3) for now. In the future, we can extend device-replace and apply method (2). For protecting a block group gets relocated multiple time with multiple IO errors, this commit introduces "relocating_repair" bit to show it's now relocating to repair IO failures. Also it uses a new kthread "btrfs-relocating-repair", not to block IO path with relocating process. This commit also supports repairing in the scrub process. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 18:22:16 +08:00
unsigned int relocating_repair:1;
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations") fixed a problem that resulted in exhausting the system chunk array in the superblock when there are many tasks allocating chunks in parallel. Basically too many tasks enter the first phase of chunk allocation without previous tasks having finished their second phase of allocation, resulting in too many system chunks being allocated. That was originally observed when running the fallocate tests of stress-ng on a PowerPC machine, using a node size of 64K. However that commit also introduced a deadlock where a task in phase 1 of the chunk allocation waited for another task that had allocated a system chunk to finish its phase 2, but that other task was waiting on an extent buffer lock held by the first task, therefore resulting in both tasks not making any progress. That change was later reverted by a patch with the subject "btrfs: fix deadlock with concurrent chunk allocations involving system chunks", since there is no simple and short solution to address it and the deadlock is relatively easy to trigger on zoned filesystems, while the system chunk array exhaustion is not so common. This change reworks the chunk allocation to avoid the system chunk array exhaustion. It accomplishes that by making the first phase of chunk allocation do the updates of the device items in the chunk btree and the insertion of the new chunk item in the chunk btree. This is done while under the protection of the chunk mutex (fs_info->chunk_mutex), in the same critical section that checks for available system space, allocates a new system chunk if needed and reserves system chunk space. This way we do not have chunk space reserved until the second phase completes. The same logic is applied to chunk removal as well, since it keeps reserved system space long after it is done updating the chunk btree. For direct allocation of system chunks, the previous behaviour remains, because otherwise we would deadlock on extent buffers of the chunk btree. Changes to the chunk btree are by large done by chunk allocation and chunk removal, which first reserve chunk system space and then later do changes to the chunk btree. The other remaining cases are uncommon and correspond to adding a device, removing a device and resizing a device. All these other cases do not pre-reserve system space, they modify the chunk btree right away, so they don't hold reserved space for a long period like chunk allocation and chunk removal do. The diff of this change is huge, but more than half of it is just addition of comments describing both how things work regarding chunk allocation and removal, including both the new behavior and the parts of the old behavior that did not change. CC: stable@vger.kernel.org # 5.12+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-29 21:43:06 +08:00
unsigned int chunk_item_inserted:1;
unsigned int zone_is_active:1;
int disk_cache_state;
/* Cache tracking stuff */
int cached;
struct btrfs_caching_control *caching_ctl;
u64 last_byte_to_unpin;
struct btrfs_space_info *space_info;
/* Free space cache stuff */
struct btrfs_free_space_ctl *free_space_ctl;
/* Block group cache stuff */
struct rb_node cache_node;
/* For block groups in the same raid type */
struct list_head list;
refcount_t refs;
/*
* List of struct btrfs_free_clusters for this block group.
* Today it will only have one thing on it, but that may change
*/
struct list_head cluster_list;
/* For delayed block group creation or deletion of empty block groups */
struct list_head bg_list;
/* For read-only block groups */
struct list_head ro_list;
/*
* When non-zero it means the block group's logical address and its
* device extents can not be reused for future block group allocations
* until the counter goes down to 0. This is to prevent them from being
* reused while some task is still using the block group after it was
* deleted - we want to make sure they can only be reused for new block
* groups after that task is done with the deleted block group.
*/
atomic_t frozen;
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-14 08:22:14 +08:00
/* For discard operations */
struct list_head discard_list;
int discard_index;
u64 discard_eligible_time;
u64 discard_cursor;
enum btrfs_discard_state discard_state;
/* For dirty block groups */
struct list_head dirty_list;
struct list_head io_list;
struct btrfs_io_ctl io_ctl;
/*
* Incremented when doing extent allocations and holding a read lock
* on the space_info's groups_sem semaphore.
* Decremented when an ordered extent that represents an IO against this
* block group's range is created (after it's added to its inode's
* root's list of ordered extents) or immediately after the allocation
* if it's a metadata extent or fallocate extent (for these cases we
* don't create ordered extents).
*/
atomic_t reservations;
/*
* Incremented while holding the spinlock *lock* by a task checking if
* it can perform a nocow write (incremented if the value for the *ro*
* field is 0). Decremented by such tasks once they create an ordered
* extent or before that if some error happens before reaching that step.
* This is to prevent races between block group relocation and nocow
* writes through direct IO.
*/
atomic_t nocow_writers;
/* Lock for free space tree operations. */
struct mutex free_space_lock;
/*
* Does the block group need to be added to the free space tree?
* Protected by free_space_lock.
*/
int needs_free_space;
/* Flag indicating this block group is placed on a sequential zone */
bool seq_zone;
btrfs: fix race between writes to swap files and scrub When we active a swap file, at btrfs_swap_activate(), we acquire the exclusive operation lock to prevent the physical location of the swap file extents to be changed by operations such as balance and device replace/resize/remove. We also call there can_nocow_extent() which, among other things, checks if the block group of a swap file extent is currently RO, and if it is we can not use the extent, since a write into it would result in COWing the extent. However we have no protection against a scrub operation running after we activate the swap file, which can result in the swap file extents to be COWed while the scrub is running and operating on the respective block group, because scrub turns a block group into RO before it processes it and then back again to RW mode after processing it. That means an attempt to write into a swap file extent while scrub is processing the respective block group, will result in COWing the extent, changing its physical location on disk. Fix this by making sure that block groups that have extents that are used by active swap files can not be turned into RO mode, therefore making it not possible for a scrub to turn them into RO mode. When a scrub finds a block group that can not be turned to RO due to the existence of extents used by swap files, it proceeds to the next block group and logs a warning message that mentions the block group was skipped due to active swap files - this is the same approach we currently use for balance. Fixes: ed46ff3d42378 ("Btrfs: support swap files") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-05 20:55:37 +08:00
/*
* Number of extents in this block group used for swap files.
* All accesses protected by the spinlock 'lock'.
*/
int swap_extents;
/* Record locked full stripes for RAID5/6 block group */
struct btrfs_full_stripe_locks_tree full_stripe_locks_root;
/*
* Allocation offset for the block group to implement sequential
* allocation. This is used only on a zoned filesystem.
*/
u64 alloc_offset;
u64 zone_unusable;
u64 zone_capacity;
u64 meta_write_pointer;
struct map_lookup *physical_map;
struct list_head active_bg_list;
};
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-14 08:22:14 +08:00
static inline u64 btrfs_block_group_end(struct btrfs_block_group *block_group)
{
return (block_group->start + block_group->length);
}
static inline bool btrfs_is_block_group_data_only(
struct btrfs_block_group *block_group)
{
/*
* In mixed mode the fragmentation is expected to be high, lowering the
* efficiency, so only proper data block groups are considered.
*/
return (block_group->flags & BTRFS_BLOCK_GROUP_DATA) &&
!(block_group->flags & BTRFS_BLOCK_GROUP_METADATA);
}
#ifdef CONFIG_BTRFS_DEBUG
static inline int btrfs_should_fragment_free_space(
struct btrfs_block_group *block_group)
{
struct btrfs_fs_info *fs_info = block_group->fs_info;
return (btrfs_test_opt(fs_info, FRAGMENT_METADATA) &&
block_group->flags & BTRFS_BLOCK_GROUP_METADATA) ||
(btrfs_test_opt(fs_info, FRAGMENT_DATA) &&
block_group->flags & BTRFS_BLOCK_GROUP_DATA);
}
#endif
struct btrfs_block_group *btrfs_lookup_first_block_group(
struct btrfs_fs_info *info, u64 bytenr);
struct btrfs_block_group *btrfs_lookup_block_group(
struct btrfs_fs_info *info, u64 bytenr);
struct btrfs_block_group *btrfs_next_block_group(
struct btrfs_block_group *cache);
void btrfs_get_block_group(struct btrfs_block_group *cache);
void btrfs_put_block_group(struct btrfs_block_group *cache);
void btrfs_dec_block_group_reservations(struct btrfs_fs_info *fs_info,
const u64 start);
void btrfs_wait_block_group_reservations(struct btrfs_block_group *bg);
bool btrfs_inc_nocow_writers(struct btrfs_fs_info *fs_info, u64 bytenr);
void btrfs_dec_nocow_writers(struct btrfs_fs_info *fs_info, u64 bytenr);
void btrfs_wait_nocow_writers(struct btrfs_block_group *bg);
void btrfs_wait_block_group_cache_progress(struct btrfs_block_group *cache,
u64 num_bytes);
int btrfs_wait_block_group_cache_done(struct btrfs_block_group *cache);
int btrfs_cache_block_group(struct btrfs_block_group *cache,
int load_cache_only);
void btrfs_put_caching_control(struct btrfs_caching_control *ctl);
struct btrfs_caching_control *btrfs_get_caching_control(
struct btrfs_block_group *cache);
u64 add_new_free_space(struct btrfs_block_group *block_group,
u64 start, u64 end);
struct btrfs_trans_handle *btrfs_start_trans_remove_block_group(
struct btrfs_fs_info *fs_info,
const u64 chunk_offset);
int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
u64 group_start, struct extent_map *em);
void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info);
void btrfs_mark_bg_unused(struct btrfs_block_group *bg);
void btrfs_reclaim_bgs_work(struct work_struct *work);
void btrfs_reclaim_bgs(struct btrfs_fs_info *fs_info);
void btrfs_mark_bg_to_reclaim(struct btrfs_block_group *bg);
int btrfs_read_block_groups(struct btrfs_fs_info *info);
btrfs: rework chunk allocation to avoid exhaustion of the system chunk array Commit eafa4fd0ad0607 ("btrfs: fix exhaustion of the system chunk array due to concurrent allocations") fixed a problem that resulted in exhausting the system chunk array in the superblock when there are many tasks allocating chunks in parallel. Basically too many tasks enter the first phase of chunk allocation without previous tasks having finished their second phase of allocation, resulting in too many system chunks being allocated. That was originally observed when running the fallocate tests of stress-ng on a PowerPC machine, using a node size of 64K. However that commit also introduced a deadlock where a task in phase 1 of the chunk allocation waited for another task that had allocated a system chunk to finish its phase 2, but that other task was waiting on an extent buffer lock held by the first task, therefore resulting in both tasks not making any progress. That change was later reverted by a patch with the subject "btrfs: fix deadlock with concurrent chunk allocations involving system chunks", since there is no simple and short solution to address it and the deadlock is relatively easy to trigger on zoned filesystems, while the system chunk array exhaustion is not so common. This change reworks the chunk allocation to avoid the system chunk array exhaustion. It accomplishes that by making the first phase of chunk allocation do the updates of the device items in the chunk btree and the insertion of the new chunk item in the chunk btree. This is done while under the protection of the chunk mutex (fs_info->chunk_mutex), in the same critical section that checks for available system space, allocates a new system chunk if needed and reserves system chunk space. This way we do not have chunk space reserved until the second phase completes. The same logic is applied to chunk removal as well, since it keeps reserved system space long after it is done updating the chunk btree. For direct allocation of system chunks, the previous behaviour remains, because otherwise we would deadlock on extent buffers of the chunk btree. Changes to the chunk btree are by large done by chunk allocation and chunk removal, which first reserve chunk system space and then later do changes to the chunk btree. The other remaining cases are uncommon and correspond to adding a device, removing a device and resizing a device. All these other cases do not pre-reserve system space, they modify the chunk btree right away, so they don't hold reserved space for a long period like chunk allocation and chunk removal do. The diff of this change is huge, but more than half of it is just addition of comments describing both how things work regarding chunk allocation and removal, including both the new behavior and the parts of the old behavior that did not change. CC: stable@vger.kernel.org # 5.12+ Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Tested-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-29 21:43:06 +08:00
struct btrfs_block_group *btrfs_make_block_group(struct btrfs_trans_handle *trans,
u64 bytes_used, u64 type,
u64 chunk_offset, u64 size);
void btrfs_create_pending_block_groups(struct btrfs_trans_handle *trans);
btrfs: scrub: Don't check free space before marking a block group RO [BUG] When running btrfs/072 with only one online CPU, it has a pretty high chance to fail: btrfs/072 12s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//btrfs/072.dmesg) - output mismatch (see xfstests-dev/results//btrfs/072.out.bad) --- tests/btrfs/072.out 2019-10-22 15:18:14.008965340 +0800 +++ /xfstests-dev/results//btrfs/072.out.bad 2019-11-14 15:56:45.877152240 +0800 @@ -1,2 +1,3 @@ QA output created by 072 Silence is golden +Scrub find errors in "-m dup -d single" test ... And with the following call trace: BTRFS info (device dm-5): scrub: started on devid 1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -27) WARNING: CPU: 0 PID: 55087 at fs/btrfs/block-group.c:1890 btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs] CPU: 0 PID: 55087 Comm: btrfs Tainted: G W O 5.4.0-rc1-custom+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs] Call Trace: __btrfs_end_transaction+0xdb/0x310 [btrfs] btrfs_end_transaction+0x10/0x20 [btrfs] btrfs_inc_block_group_ro+0x1c9/0x210 [btrfs] scrub_enumerate_chunks+0x264/0x940 [btrfs] btrfs_scrub_dev+0x45c/0x8f0 [btrfs] btrfs_ioctl+0x31a1/0x3fb0 [btrfs] do_vfs_ioctl+0x636/0xaa0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x79/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe ---[ end trace 166c865cec7688e7 ]--- [CAUSE] The error number -27 is -EFBIG, returned from the following call chain: btrfs_end_transaction() |- __btrfs_end_transaction() |- btrfs_create_pending_block_groups() |- btrfs_finish_chunk_alloc() |- btrfs_add_system_chunk() This happens because we have used up all space of btrfs_super_block::sys_chunk_array. The root cause is, we have the following bad loop of creating tons of system chunks: 1. The only SYSTEM chunk is being scrubbed It's very common to have only one SYSTEM chunk. 2. New SYSTEM bg will be allocated As btrfs_inc_block_group_ro() will check if we have enough space after marking current bg RO. If not, then allocate a new chunk. 3. New SYSTEM bg is still empty, will be reclaimed During the reclaim, we will mark it RO again. 4. That newly allocated empty SYSTEM bg get scrubbed We go back to step 2, as the bg is already mark RO but still not cleaned up yet. If the cleaner kthread doesn't get executed fast enough (e.g. only one CPU), then we will get more and more empty SYSTEM chunks, using up all the space of btrfs_super_block::sys_chunk_array. [FIX] Since scrub/dev-replace doesn't always need to allocate new extent, especially chunk tree extent, so we don't really need to do chunk pre-allocation. To break above spiral, here we introduce a new parameter to btrfs_inc_block_group(), @do_chunk_alloc, which indicates whether we need extra chunk pre-allocation. For relocation, we pass @do_chunk_alloc=true, while for scrub, we pass @do_chunk_alloc=false. This should keep unnecessary empty chunks from popping up for scrub. Also, since there are two parameters for btrfs_inc_block_group_ro(), add more comment for it. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-15 10:09:00 +08:00
int btrfs_inc_block_group_ro(struct btrfs_block_group *cache,
bool do_chunk_alloc);
void btrfs_dec_block_group_ro(struct btrfs_block_group *cache);
int btrfs_start_dirty_block_groups(struct btrfs_trans_handle *trans);
int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans);
int btrfs_setup_space_cache(struct btrfs_trans_handle *trans);
int btrfs_update_block_group(struct btrfs_trans_handle *trans,
u64 bytenr, u64 num_bytes, bool alloc);
int btrfs_add_reserved_bytes(struct btrfs_block_group *cache,
u64 ram_bytes, u64 num_bytes, int delalloc);
void btrfs_free_reserved_bytes(struct btrfs_block_group *cache,
u64 num_bytes, int delalloc);
int btrfs_chunk_alloc(struct btrfs_trans_handle *trans, u64 flags,
enum btrfs_chunk_alloc_enum force);
int btrfs_force_chunk_alloc(struct btrfs_trans_handle *trans, u64 type);
void check_system_chunk(struct btrfs_trans_handle *trans, const u64 type);
btrfs: fix deadlock between chunk allocation and chunk btree modifications When a task is doing some modification to the chunk btree and it is not in the context of a chunk allocation or a chunk removal, it can deadlock with another task that is currently allocating a new data or metadata chunk. These contexts are the following: * When relocating a system chunk, when we need to COW the extent buffers that belong to the chunk btree; * When adding a new device (ioctl), where we need to add a new device item to the chunk btree; * When removing a device (ioctl), where we need to remove a device item from the chunk btree; * When resizing a device (ioctl), where we need to update a device item in the chunk btree and may need to relocate a system chunk that lies beyond the new device size when shrinking a device. The problem happens due to a sequence of steps like the following: 1) Task A starts a data or metadata chunk allocation and it locks the chunk mutex; 2) Task B is relocating a system chunk, and when it needs to COW an extent buffer of the chunk btree, it has locked both that extent buffer as well as its parent extent buffer; 3) Since there is not enough available system space, either because none of the existing system block groups have enough free space or because the only one with enough free space is in RO mode due to the relocation, task B triggers a new system chunk allocation. It blocks when trying to acquire the chunk mutex, currently held by task A; 4) Task A enters btrfs_chunk_alloc_add_chunk_item(), in order to insert the new chunk item into the chunk btree and update the existing device items there. But in order to do that, it has to lock the extent buffer that task B locked at step 2, or its parent extent buffer, but task B is waiting on the chunk mutex, which is currently locked by task A, therefore resulting in a deadlock. One example report when the deadlock happens with system chunk relocation: INFO: task kworker/u9:5:546 blocked for more than 143 seconds. Not tainted 5.15.0-rc3+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u9:5 state:D stack:25936 pid: 546 ppid: 2 flags:0x00004000 Workqueue: events_unbound btrfs_async_reclaim_metadata_space Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xcd9/0x2530 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 rwsem_down_read_slowpath+0x4ee/0x9d0 kernel/locking/rwsem.c:993 __down_read_common kernel/locking/rwsem.c:1214 [inline] __down_read kernel/locking/rwsem.c:1223 [inline] down_read_nested+0xe6/0x440 kernel/locking/rwsem.c:1590 __btrfs_tree_read_lock+0x31/0x350 fs/btrfs/locking.c:47 btrfs_tree_read_lock fs/btrfs/locking.c:54 [inline] btrfs_read_lock_root_node+0x8a/0x320 fs/btrfs/locking.c:191 btrfs_search_slot_get_root fs/btrfs/ctree.c:1623 [inline] btrfs_search_slot+0x13b4/0x2140 fs/btrfs/ctree.c:1728 btrfs_update_device+0x11f/0x500 fs/btrfs/volumes.c:2794 btrfs_chunk_alloc_add_chunk_item+0x34d/0xea0 fs/btrfs/volumes.c:5504 do_chunk_alloc fs/btrfs/block-group.c:3408 [inline] btrfs_chunk_alloc+0x84d/0xf50 fs/btrfs/block-group.c:3653 flush_space+0x54e/0xd80 fs/btrfs/space-info.c:670 btrfs_async_reclaim_metadata_space+0x396/0xa90 fs/btrfs/space-info.c:953 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2297 worker_thread+0x90/0xed0 kernel/workqueue.c:2444 kthread+0x3e5/0x4d0 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 INFO: task syz-executor:9107 blocked for more than 143 seconds. Not tainted 5.15.0-rc3+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:23200 pid: 9107 ppid: 7792 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xcd9/0x2530 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425 __mutex_lock_common kernel/locking/mutex.c:669 [inline] __mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729 btrfs_chunk_alloc+0x31a/0xf50 fs/btrfs/block-group.c:3631 find_free_extent_update_loop fs/btrfs/extent-tree.c:3986 [inline] find_free_extent+0x25cb/0x3a30 fs/btrfs/extent-tree.c:4335 btrfs_reserve_extent+0x1f1/0x500 fs/btrfs/extent-tree.c:4415 btrfs_alloc_tree_block+0x203/0x1120 fs/btrfs/extent-tree.c:4813 __btrfs_cow_block+0x412/0x1620 fs/btrfs/ctree.c:415 btrfs_cow_block+0x2f6/0x8c0 fs/btrfs/ctree.c:570 btrfs_search_slot+0x1094/0x2140 fs/btrfs/ctree.c:1768 relocate_tree_block fs/btrfs/relocation.c:2694 [inline] relocate_tree_blocks+0xf73/0x1770 fs/btrfs/relocation.c:2757 relocate_block_group+0x47e/0xc70 fs/btrfs/relocation.c:3673 btrfs_relocate_block_group+0x48a/0xc60 fs/btrfs/relocation.c:4070 btrfs_relocate_chunk+0x96/0x280 fs/btrfs/volumes.c:3181 __btrfs_balance fs/btrfs/volumes.c:3911 [inline] btrfs_balance+0x1f03/0x3cd0 fs/btrfs/volumes.c:4301 btrfs_ioctl_balance+0x61e/0x800 fs/btrfs/ioctl.c:4137 btrfs_ioctl+0x39ea/0x7b70 fs/btrfs/ioctl.c:4949 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae So fix this by making sure that whenever we try to modify the chunk btree and we are neither in a chunk allocation context nor in a chunk remove context, we reserve system space before modifying the chunk btree. Reported-by: Hao Sun <sunhao.th@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CACkBjsax51i4mu6C0C3vJqQN3NR_iVuucoeG3U1HXjrgzn5FFQ@mail.gmail.com/ Fixes: 79bd37120b1495 ("btrfs: rework chunk allocation to avoid exhaustion of the system chunk array") CC: stable@vger.kernel.org # 5.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-13 17:12:49 +08:00
void btrfs_reserve_chunk_metadata(struct btrfs_trans_handle *trans,
bool is_item_insertion);
u64 btrfs_get_alloc_profile(struct btrfs_fs_info *fs_info, u64 orig_flags);
void btrfs_put_block_group_cache(struct btrfs_fs_info *info);
int btrfs_free_block_groups(struct btrfs_fs_info *info);
void btrfs_wait_space_cache_v1_finished(struct btrfs_block_group *cache,
struct btrfs_caching_control *caching_ctl);
int btrfs_rmap_block(struct btrfs_fs_info *fs_info, u64 chunk_start,
struct block_device *bdev, u64 physical, u64 **logical,
int *naddrs, int *stripe_len);
static inline u64 btrfs_data_alloc_profile(struct btrfs_fs_info *fs_info)
{
return btrfs_get_alloc_profile(fs_info, BTRFS_BLOCK_GROUP_DATA);
}
static inline u64 btrfs_metadata_alloc_profile(struct btrfs_fs_info *fs_info)
{
return btrfs_get_alloc_profile(fs_info, BTRFS_BLOCK_GROUP_METADATA);
}
static inline u64 btrfs_system_alloc_profile(struct btrfs_fs_info *fs_info)
{
return btrfs_get_alloc_profile(fs_info, BTRFS_BLOCK_GROUP_SYSTEM);
}
static inline int btrfs_block_group_done(struct btrfs_block_group *cache)
{
smp_mb();
return cache->cached == BTRFS_CACHE_FINISHED ||
cache->cached == BTRFS_CACHE_ERROR;
}
void btrfs_freeze_block_group(struct btrfs_block_group *cache);
void btrfs_unfreeze_block_group(struct btrfs_block_group *cache);
btrfs: fix race between writes to swap files and scrub When we active a swap file, at btrfs_swap_activate(), we acquire the exclusive operation lock to prevent the physical location of the swap file extents to be changed by operations such as balance and device replace/resize/remove. We also call there can_nocow_extent() which, among other things, checks if the block group of a swap file extent is currently RO, and if it is we can not use the extent, since a write into it would result in COWing the extent. However we have no protection against a scrub operation running after we activate the swap file, which can result in the swap file extents to be COWed while the scrub is running and operating on the respective block group, because scrub turns a block group into RO before it processes it and then back again to RW mode after processing it. That means an attempt to write into a swap file extent while scrub is processing the respective block group, will result in COWing the extent, changing its physical location on disk. Fix this by making sure that block groups that have extents that are used by active swap files can not be turned into RO mode, therefore making it not possible for a scrub to turn them into RO mode. When a scrub finds a block group that can not be turned to RO due to the existence of extents used by swap files, it proceeds to the next block group and logs a warning message that mentions the block group was skipped due to active swap files - this is the same approach we currently use for balance. Fixes: ed46ff3d42378 ("Btrfs: support swap files") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-05 20:55:37 +08:00
bool btrfs_inc_block_group_swap_extents(struct btrfs_block_group *bg);
void btrfs_dec_block_group_swap_extents(struct btrfs_block_group *bg, int amount);
#endif /* BTRFS_BLOCK_GROUP_H */