UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/net/rxrpc/peer_event.c

463 lines
11 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:01 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
/* Peer event handling, typically ICMP messages.
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*/
#include <linux/module.h>
#include <linux/net.h>
#include <linux/skbuff.h>
#include <linux/errqueue.h>
#include <linux/udp.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/icmp.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <net/ip.h>
#include "ar-internal.h"
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
static void rxrpc_store_error(struct rxrpc_peer *, struct sock_exterr_skb *);
rxrpc: Fix error distribution Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 22:13:09 +08:00
static void rxrpc_distribute_error(struct rxrpc_peer *, int,
enum rxrpc_call_completion);
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
/*
* Find the peer associated with an ICMP packet.
*/
static struct rxrpc_peer *rxrpc_lookup_peer_icmp_rcu(struct rxrpc_local *local,
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
const struct sk_buff *skb,
struct sockaddr_rxrpc *srx)
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
{
struct sock_exterr_skb *serr = SKB_EXT_ERR(skb);
_enter("");
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
memset(srx, 0, sizeof(*srx));
srx->transport_type = local->srx.transport_type;
srx->transport_len = local->srx.transport_len;
srx->transport.family = local->srx.transport.family;
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
/* Can we see an ICMP4 packet on an ICMP6 listening socket? and vice
* versa?
*/
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
switch (srx->transport.family) {
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
case AF_INET:
rxrpc: Use IPv4 addresses throught the IPv6 AF_RXRPC opens an IPv6 socket through which to send and receive network packets, both IPv6 and IPv4. It currently turns AF_INET addresses into AF_INET-as-AF_INET6 addresses based on an assumption that this was necessary; on further inspection of the code, however, it turns out that the IPv6 code just farms packets aimed at AF_INET addresses out to the IPv4 code. Fix AF_RXRPC to use AF_INET addresses directly when given them. Fixes: 7b674e390e51 ("rxrpc: Fix IPv6 support") Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-04 16:32:28 +08:00
srx->transport_len = sizeof(srx->transport.sin);
srx->transport.family = AF_INET;
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
srx->transport.sin.sin_port = serr->port;
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
switch (serr->ee.ee_origin) {
case SO_EE_ORIGIN_ICMP:
_net("Rx ICMP");
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
memcpy(&srx->transport.sin.sin_addr,
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
skb_network_header(skb) + serr->addr_offset,
sizeof(struct in_addr));
break;
case SO_EE_ORIGIN_ICMP6:
_net("Rx ICMP6 on v4 sock");
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
memcpy(&srx->transport.sin.sin_addr,
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
skb_network_header(skb) + serr->addr_offset + 12,
sizeof(struct in_addr));
break;
default:
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
memcpy(&srx->transport.sin.sin_addr, &ip_hdr(skb)->saddr,
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
sizeof(struct in_addr));
break;
}
break;
rxrpc: Make IPv6 support conditional on CONFIG_IPV6 Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it. This is then made conditional on CONFIG_IPV6. Without this, the following can be seen: net/built-in.o: In function `rxrpc_init_peer': >> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17 14:26:01 +08:00
#ifdef CONFIG_AF_RXRPC_IPV6
rxrpc: Add IPv6 support Add IPv6 support to AF_RXRPC. With this, AF_RXRPC sockets can be created: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET6); instead of: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET); The AFS filesystem doesn't support IPv6 at the moment, though, since that requires upgrades to some of the RPC calls. Note that a good portion of this patch is replacing "%pI4:%u" in print statements with "%pISpc" which is able to handle both protocols and print the port. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-13 15:49:05 +08:00
case AF_INET6:
switch (serr->ee.ee_origin) {
case SO_EE_ORIGIN_ICMP6:
_net("Rx ICMP6");
rxrpc: Use IPv4 addresses throught the IPv6 AF_RXRPC opens an IPv6 socket through which to send and receive network packets, both IPv6 and IPv4. It currently turns AF_INET addresses into AF_INET-as-AF_INET6 addresses based on an assumption that this was necessary; on further inspection of the code, however, it turns out that the IPv6 code just farms packets aimed at AF_INET addresses out to the IPv4 code. Fix AF_RXRPC to use AF_INET addresses directly when given them. Fixes: 7b674e390e51 ("rxrpc: Fix IPv6 support") Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-04 16:32:28 +08:00
srx->transport.sin6.sin6_port = serr->port;
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
memcpy(&srx->transport.sin6.sin6_addr,
rxrpc: Add IPv6 support Add IPv6 support to AF_RXRPC. With this, AF_RXRPC sockets can be created: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET6); instead of: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET); The AFS filesystem doesn't support IPv6 at the moment, though, since that requires upgrades to some of the RPC calls. Note that a good portion of this patch is replacing "%pI4:%u" in print statements with "%pISpc" which is able to handle both protocols and print the port. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-13 15:49:05 +08:00
skb_network_header(skb) + serr->addr_offset,
sizeof(struct in6_addr));
break;
case SO_EE_ORIGIN_ICMP:
_net("Rx ICMP on v6 sock");
rxrpc: Use IPv4 addresses throught the IPv6 AF_RXRPC opens an IPv6 socket through which to send and receive network packets, both IPv6 and IPv4. It currently turns AF_INET addresses into AF_INET-as-AF_INET6 addresses based on an assumption that this was necessary; on further inspection of the code, however, it turns out that the IPv6 code just farms packets aimed at AF_INET addresses out to the IPv4 code. Fix AF_RXRPC to use AF_INET addresses directly when given them. Fixes: 7b674e390e51 ("rxrpc: Fix IPv6 support") Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-04 16:32:28 +08:00
srx->transport_len = sizeof(srx->transport.sin);
srx->transport.family = AF_INET;
srx->transport.sin.sin_port = serr->port;
memcpy(&srx->transport.sin.sin_addr,
rxrpc: Add IPv6 support Add IPv6 support to AF_RXRPC. With this, AF_RXRPC sockets can be created: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET6); instead of: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET); The AFS filesystem doesn't support IPv6 at the moment, though, since that requires upgrades to some of the RPC calls. Note that a good portion of this patch is replacing "%pI4:%u" in print statements with "%pISpc" which is able to handle both protocols and print the port. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-13 15:49:05 +08:00
skb_network_header(skb) + serr->addr_offset,
sizeof(struct in_addr));
break;
default:
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
memcpy(&srx->transport.sin6.sin6_addr,
rxrpc: Add IPv6 support Add IPv6 support to AF_RXRPC. With this, AF_RXRPC sockets can be created: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET6); instead of: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET); The AFS filesystem doesn't support IPv6 at the moment, though, since that requires upgrades to some of the RPC calls. Note that a good portion of this patch is replacing "%pI4:%u" in print statements with "%pISpc" which is able to handle both protocols and print the port. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-13 15:49:05 +08:00
&ipv6_hdr(skb)->saddr,
sizeof(struct in6_addr));
break;
}
break;
rxrpc: Make IPv6 support conditional on CONFIG_IPV6 Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it. This is then made conditional on CONFIG_IPV6. Without this, the following can be seen: net/built-in.o: In function `rxrpc_init_peer': >> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17 14:26:01 +08:00
#endif
rxrpc: Add IPv6 support Add IPv6 support to AF_RXRPC. With this, AF_RXRPC sockets can be created: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET6); instead of: service = socket(AF_RXRPC, SOCK_DGRAM, PF_INET); The AFS filesystem doesn't support IPv6 at the moment, though, since that requires upgrades to some of the RPC calls. Note that a good portion of this patch is replacing "%pI4:%u" in print statements with "%pISpc" which is able to handle both protocols and print the port. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-13 15:49:05 +08:00
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
default:
BUG();
}
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
return rxrpc_lookup_peer_rcu(local, srx);
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
}
rxrpc: Break MTU determination from ICMP into its own function Break MTU determination from ICMP out into its own function to reduce the complexity of the error report handler. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:33 +08:00
/*
* Handle an MTU/fragmentation problem.
*/
static void rxrpc_adjust_mtu(struct rxrpc_peer *peer, struct sock_exterr_skb *serr)
{
u32 mtu = serr->ee.ee_info;
_net("Rx ICMP Fragmentation Needed (%d)", mtu);
/* wind down the local interface MTU */
if (mtu > 0 && peer->if_mtu == 65535 && mtu < peer->if_mtu) {
peer->if_mtu = mtu;
_net("I/F MTU %u", mtu);
}
if (mtu == 0) {
/* they didn't give us a size, estimate one */
mtu = peer->if_mtu;
if (mtu > 1500) {
mtu >>= 1;
if (mtu < 1500)
mtu = 1500;
} else {
mtu -= 100;
if (mtu < peer->hdrsize)
mtu = peer->hdrsize + 4;
}
}
if (mtu < peer->mtu) {
spin_lock_bh(&peer->lock);
peer->mtu = mtu;
peer->maxdata = peer->mtu - peer->hdrsize;
spin_unlock_bh(&peer->lock);
_net("Net MTU %u (maxdata %u)",
peer->mtu, peer->maxdata);
}
}
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
/*
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
* Handle an error received on the local endpoint.
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
*/
rxrpc: Rename rxrpc_UDP_error_report() to rxrpc_error_report() Rename rxrpc_UDP_error_report() to rxrpc_error_report() as it might get called for something other than UDP. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
void rxrpc_error_report(struct sock *sk)
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
{
struct sock_exterr_skb *serr;
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
struct sockaddr_rxrpc srx;
rxrpc: use rcu protection while reading sk->sk_user_data We need to extend the rcu_read_lock() section in rxrpc_error_report() and use rcu_dereference_sk_user_data() instead of plain access to sk->sk_user_data to make sure all rules are respected. The compiler wont reload sk->sk_user_data at will, and RCU rules prevent memory beeing freed too soon. Fixes: f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling") Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-14 21:04:38 +08:00
struct rxrpc_local *local;
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
struct rxrpc_peer *peer;
struct sk_buff *skb;
rxrpc: use rcu protection while reading sk->sk_user_data We need to extend the rcu_read_lock() section in rxrpc_error_report() and use rcu_dereference_sk_user_data() instead of plain access to sk->sk_user_data to make sure all rules are respected. The compiler wont reload sk->sk_user_data at will, and RCU rules prevent memory beeing freed too soon. Fixes: f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling") Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-14 21:04:38 +08:00
rcu_read_lock();
local = rcu_dereference_sk_user_data(sk);
if (unlikely(!local)) {
rcu_read_unlock();
rxrpc: Fix possible NULL pointer access in ICMP handling If an ICMP packet comes in on the UDP socket backing an AF_RXRPC socket as the UDP socket is being shut down, rxrpc_error_report() may get called to deal with it after sk_user_data on the UDP socket has been cleared, leading to a NULL pointer access when this local endpoint record gets accessed. Fix this by just returning immediately if sk_user_data was NULL. The oops looks like the following: #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:rxrpc_error_report+0x1bd/0x6a9 ... Call Trace: ? sock_queue_err_skb+0xbd/0xde ? __udp4_lib_err+0x313/0x34d __udp4_lib_err+0x313/0x34d icmp_unreach+0x1ee/0x207 icmp_rcv+0x25b/0x28f ip_protocol_deliver_rcu+0x95/0x10e ip_local_deliver+0xe9/0x148 __netif_receive_skb_one_core+0x52/0x6e process_backlog+0xdc/0x177 net_rx_action+0xf9/0x270 __do_softirq+0x1b6/0x39a ? smpboot_register_percpu_thread+0xce/0xce run_ksoftirqd+0x1d/0x42 smpboot_thread_fn+0x19e/0x1b3 kthread+0xf1/0xf6 ? kthread_delayed_work_timer_fn+0x83/0x83 ret_from_fork+0x24/0x30 Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by: syzbot+611164843bd48cc2190c@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-10 22:52:34 +08:00
return;
rxrpc: use rcu protection while reading sk->sk_user_data We need to extend the rcu_read_lock() section in rxrpc_error_report() and use rcu_dereference_sk_user_data() instead of plain access to sk->sk_user_data to make sure all rules are respected. The compiler wont reload sk->sk_user_data at will, and RCU rules prevent memory beeing freed too soon. Fixes: f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling") Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-14 21:04:38 +08:00
}
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
_enter("%p{%d}", sk, local->debug_id);
rxrpc: Clear socket error When an ICMP or ICMPV6 error is received, the error will be attached to the socket (sk_err) and the report function will get called. Clear any pending error here by calling sock_error(). This would cause the following attempt to use the socket to fail with the error code stored by the ICMP error, resulting in unexpected errors with various side effects depending on the context. Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jonathan Billings <jsbillin@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 23:33:40 +08:00
/* Clear the outstanding error value on the socket so that it doesn't
* cause kernel_sendmsg() to return it later.
*/
sock_error(sk);
sock: deduplicate errqueue dequeue sk->sk_error_queue is dequeued in four locations. All share the exact same logic. Deduplicate. Also collapse the two critical sections for dequeue (at the top of the recv handler) and signal (at the bottom). This moves signal generation for the next packet forward, which should be harmless. It also changes the behavior if the recv handler exits early with an error. Previously, a signal for follow-up packets on the errqueue would then not be scheduled. The new behavior, to always signal, is arguably a bug fix. For rxrpc, the change causes the same function to be called repeatedly for each queued packet (because the recv handler == sk_error_report). It is likely that all packets will fail for the same reason (e.g., memory exhaustion). This code runs without sk_lock held, so it is not safe to trust that sk->sk_err is immutable inbetween releasing q->lock and the subsequent test. Introduce int err just to avoid this potential race. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01 09:30:27 +08:00
skb = sock_dequeue_err_skb(sk);
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
if (!skb) {
rxrpc: use rcu protection while reading sk->sk_user_data We need to extend the rcu_read_lock() section in rxrpc_error_report() and use rcu_dereference_sk_user_data() instead of plain access to sk->sk_user_data to make sure all rules are respected. The compiler wont reload sk->sk_user_data at will, and RCU rules prevent memory beeing freed too soon. Fixes: f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling") Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-14 21:04:38 +08:00
rcu_read_unlock();
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
_leave("UDP socket errqueue empty");
return;
}
rxrpc: Use the tx-phase skb flag to simplify tracing Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-19 16:25:38 +08:00
rxrpc_new_skb(skb, rxrpc_skb_received);
ip: fix error queue empty skb handling When reading from the error queue, msg_name and msg_control are only populated for some errors. A new exception for empty timestamp skbs added a false positive on icmp errors without payload. `traceroute -M udpconn` only displayed gateways that return payload with the icmp error: the embedded network headers are pulled before sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise. Fix this regression by refining when msg_name and msg_control branches are taken. The solutions for the two fields are independent. msg_name only makes sense for errors that configure serr->port and serr->addr_offset. Test the first instead of skb->len. This also fixes another issue. saddr could hold the wrong data, as serr->addr_offset is not initialized in some code paths, pointing to the start of the network header. It is only valid when serr->port is set (non-zero). msg_control support differs between IPv4 and IPv6. IPv4 only honors requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The skb->len test can simply be removed, because skb->dev is also tested and never true for empty skbs. IPv6 honors requests for all errors aside from local errors and timestamps on empty skbs. In both cases, make the policy more explicit by moving this logic to a new function that decides whether to process msg_control and that optionally prepares the necessary fields in skb->cb[]. After this change, the IPv4 and IPv6 paths are more similar. The last case is rxrpc. Here, simply refine to only match timestamps. Fixes: 49ca0d8bfaf3 ("net-timestamp: no-payload option") Reported-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1->v2 - fix local origin test inversion in ip6_datagram_support_cmsg - make v4 and v6 code paths more similar by introducing analogous ipv4_datagram_support_cmsg - fix compile bug in rxrpc Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08 09:33:22 +08:00
serr = SKB_EXT_ERR(skb);
if (!skb->len && serr->ee.ee_origin == SO_EE_ORIGIN_TIMESTAMPING) {
net-timestamp: no-payload option Add timestamping option SOF_TIMESTAMPING_OPT_TSONLY. For transmit timestamps, this loops timestamps on top of empty packets. Doing so reduces the pressure on SO_RCVBUF. Payload inspection and cmsg reception (aside from timestamps) are no longer possible. This works together with a follow on patch that allows administrators to only allow tx timestamping if it does not loop payload or metadata. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes (rfc -> v1) - add documentation - remove unnecessary skb->len test (thanks to Richard Cochran) Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31 02:29:31 +08:00
_leave("UDP empty message");
rxrpc: use rcu protection while reading sk->sk_user_data We need to extend the rcu_read_lock() section in rxrpc_error_report() and use rcu_dereference_sk_user_data() instead of plain access to sk->sk_user_data to make sure all rules are respected. The compiler wont reload sk->sk_user_data at will, and RCU rules prevent memory beeing freed too soon. Fixes: f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling") Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-14 21:04:38 +08:00
rcu_read_unlock();
rxrpc: Use the tx-phase skb flag to simplify tracing Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-19 16:25:38 +08:00
rxrpc_free_skb(skb, rxrpc_skb_freed);
net-timestamp: no-payload option Add timestamping option SOF_TIMESTAMPING_OPT_TSONLY. For transmit timestamps, this loops timestamps on top of empty packets. Doing so reduces the pressure on SO_RCVBUF. Payload inspection and cmsg reception (aside from timestamps) are no longer possible. This works together with a follow on patch that allows administrators to only allow tx timestamping if it does not loop payload or metadata. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes (rfc -> v1) - add documentation - remove unnecessary skb->len test (thanks to Richard Cochran) Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31 02:29:31 +08:00
return;
}
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
peer = rxrpc_lookup_peer_icmp_rcu(local, skb, &srx);
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
if (peer && !rxrpc_get_peer_maybe(peer))
peer = NULL;
if (!peer) {
rcu_read_unlock();
rxrpc: Use the tx-phase skb flag to simplify tracing Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-19 16:25:38 +08:00
rxrpc_free_skb(skb, rxrpc_skb_freed);
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
_leave(" [no peer]");
return;
}
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-11 06:26:01 +08:00
trace_rxrpc_rx_icmp(peer, &serr->ee, &srx);
rxrpc: Break MTU determination from ICMP into its own function Break MTU determination from ICMP out into its own function to reduce the complexity of the error report handler. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:33 +08:00
if ((serr->ee.ee_origin == SO_EE_ORIGIN_ICMP &&
serr->ee.ee_type == ICMP_DEST_UNREACH &&
serr->ee.ee_code == ICMP_FRAG_NEEDED)) {
rxrpc_adjust_mtu(peer, serr);
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
rcu_read_unlock();
rxrpc: Use the tx-phase skb flag to simplify tracing Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-19 16:25:38 +08:00
rxrpc_free_skb(skb, rxrpc_skb_freed);
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
rxrpc_put_peer(peer);
_leave(" [MTU update]");
return;
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
}
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
rxrpc_store_error(peer, serr);
rxrpc: Rework peer object handling to use hash table and RCU Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:32 +08:00
rcu_read_unlock();
rxrpc: Use the tx-phase skb flag to simplify tracing Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-19 16:25:38 +08:00
rxrpc_free_skb(skb, rxrpc_skb_freed);
rxrpc: Fix a missing rxrpc_put_peer() in the error_report handler Fix a missing call to rxrpc_put_peer() on the main path through the rxrpc_error_report() function. This manifests itself as a ref leak whenever an ICMP packet or other error comes in. In commit f334430316e7, the hand-off of the ref to a work item was removed and was not replaced with a put. Fixes: f334430316e7 ("rxrpc: Fix error distribution") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16 05:37:21 +08:00
rxrpc_put_peer(peer);
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
_leave("");
}
/*
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
* Map an error report to error codes on the peer record.
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
*/
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
static void rxrpc_store_error(struct rxrpc_peer *peer,
struct sock_exterr_skb *serr)
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
{
rxrpc: Fix error distribution Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 22:13:09 +08:00
enum rxrpc_call_completion compl = RXRPC_CALL_NETWORK_ERROR;
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
struct sock_extended_err *ee;
rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-20 06:37:11 +08:00
int err;
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
_enter("");
ee = &serr->ee;
err = ee->ee_errno;
switch (ee->ee_origin) {
case SO_EE_ORIGIN_ICMP:
switch (ee->ee_type) {
case ICMP_DEST_UNREACH:
switch (ee->ee_code) {
case ICMP_NET_UNREACH:
_net("Rx Received ICMP Network Unreachable");
break;
case ICMP_HOST_UNREACH:
_net("Rx Received ICMP Host Unreachable");
break;
case ICMP_PORT_UNREACH:
_net("Rx Received ICMP Port Unreachable");
break;
case ICMP_NET_UNKNOWN:
_net("Rx Received ICMP Unknown Network");
break;
case ICMP_HOST_UNKNOWN:
_net("Rx Received ICMP Unknown Host");
break;
default:
_net("Rx Received ICMP DestUnreach code=%u",
ee->ee_code);
break;
}
break;
case ICMP_TIME_EXCEEDED:
_net("Rx Received ICMP TTL Exceeded");
break;
default:
_proto("Rx Received ICMP error { type=%u code=%u }",
ee->ee_type, ee->ee_code);
break;
}
break;
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
case SO_EE_ORIGIN_NONE:
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
case SO_EE_ORIGIN_LOCAL:
rxrpc: Do a little bit of tidying in the ICMP processing Do a little bit of tidying in the ICMP processing code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
_proto("Rx Received local error { error=%d }", err);
rxrpc: Fix error distribution Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 22:13:09 +08:00
compl = RXRPC_CALL_LOCAL_ERROR;
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
break;
case SO_EE_ORIGIN_ICMP6:
default:
rxrpc: Do a little bit of tidying in the ICMP processing Do a little bit of tidying in the ICMP processing code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
_proto("Rx Received error report { orig=%u }", ee->ee_origin);
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
break;
}
rxrpc: Fix error distribution Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 22:13:09 +08:00
rxrpc_distribute_error(peer, err, compl);
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
}
/*
rxrpc: Fix error distribution Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 22:13:09 +08:00
* Distribute an error that occurred on a peer.
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
*/
rxrpc: Fix error distribution Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 22:13:09 +08:00
static void rxrpc_distribute_error(struct rxrpc_peer *peer, int error,
enum rxrpc_call_completion compl)
rxrpc: Use the peer record to distribute network errors Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 21:00:34 +08:00
{
struct rxrpc_call *call;
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
rxrpc: Fix error distribution Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 22:13:09 +08:00
hlist_for_each_entry_rcu(call, &peer->error_targets, error_link) {
rxrpc: Trace rxrpc_call usage Add a trace event for debuging rxrpc_call struct usage. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-30 16:49:29 +08:00
rxrpc_see_call(call);
rxrpc: Fix error distribution Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 22:13:09 +08:00
if (call->state < RXRPC_CALL_COMPLETE &&
rxrpc_set_call_completion(call, compl, 0, -error))
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 18:10:12 +08:00
rxrpc_notify_socket(call);
[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve answers to AFS clients. KerberosIV security is fully supported. The patches and some example test programs can be found in: http://people.redhat.com/~dhowells/rxrpc/ This will eventually replace the old implementation of kernel-only RxRPC currently resident in net/rxrpc/. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 06:48:28 +08:00
}
}
rxrpc: Add per-peer RTT tracker Add a function to track the average RTT for a peer. Sources of RTT data will be added in subsequent patches. The RTT data will be useful in the future for determining resend timeouts and for handling the slow-start part of the Rx protocol. Also add a pair of tracepoints, one to log transmissions to elicit a response for RTT purposes and one to log responses that contribute RTT data. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-22 07:41:53 +08:00
/*
* Add RTT information to cache. This is called in softirq mode and has
* exclusive access to the peer RTT data.
*/
void rxrpc_peer_add_rtt(struct rxrpc_call *call, enum rxrpc_rtt_rx_trace why,
rxrpc_serial_t send_serial, rxrpc_serial_t resp_serial,
ktime_t send_time, ktime_t resp_time)
{
struct rxrpc_peer *peer = call->peer;
s64 rtt;
u64 sum = peer->rtt_sum, avg;
u8 cursor = peer->rtt_cursor, usage = peer->rtt_usage;
rtt = ktime_to_ns(ktime_sub(resp_time, send_time));
if (rtt < 0)
return;
rxrpc: Fix the packet reception routine The rxrpc_input_packet() function and its call tree was built around the assumption that data_ready() handler called from UDP to inform a kernel service that there is data to be had was non-reentrant. This means that certain locking could be dispensed with. This, however, turns out not to be the case with a multi-queue network card that can deliver packets to multiple cpus simultaneously. Each of those cpus can be in the rxrpc_input_packet() function at the same time. Fix by adding or changing some structure members: (1) Add peer->rtt_input_lock to serialise access to the RTT buffer. (2) Make conn->service_id into a 32-bit variable so that it can be cmpxchg'd on all arches. (3) Add call->input_lock to serialise access to the Rx/Tx state. Note that although the Rx and Tx states are (almost) entirely separate, there's no point completing the separation and having separate locks since it's a bi-phasal RPC protocol rather than a bi-direction streaming protocol. Data transmission and data reception do not take place simultaneously on any particular call. and making the following functional changes: (1) In rxrpc_input_data(), hold call->input_lock around the core to prevent simultaneous producing of packets into the Rx ring and updating of tracking state for a particular call. (2) In rxrpc_input_ping_response(), only read call->ping_serial once, and check it before checking RXRPC_CALL_PINGING as that's a cheaper test. The bit test and bit clear can then be combined. No further locking is needed here. (3) In rxrpc_input_ack(), take call->input_lock after we've parsed much of the ACK packet. The superseded ACK check is then done both before and after the lock is taken. The handing of ackinfo data is split, parsing before the lock is taken and processing with it held. This is keyed on rxMTU being non-zero. Congestion management is also done within the locked section. (4) In rxrpc_input_ackall(), take call->input_lock around the Tx window rotation. The ACKALL packet carries no information and is only really useful after all packets have been transmitted since it's imprecise. (5) In rxrpc_input_implicit_end_call(), we use rx->incoming_lock to prevent calls being simultaneously implicitly ended on two cpus and also to prevent any races with incoming call setup. (6) In rxrpc_input_packet(), use cmpxchg() to effect the service upgrade on a connection. It is only permitted to happen once for a connection. (7) In rxrpc_new_incoming_call(), we have to recheck the routing inside rx->incoming_lock to see if someone else set up the call, connection or peer whilst we were getting there. We can't trust the values from the earlier routing check unless we pin refs on them - which we want to avoid. Further, we need to allow for an incoming call to have its state changed on another CPU between us making it live and us adjusting it because the conn is now in the RXRPC_CONN_SERVICE state. (8) In rxrpc_peer_add_rtt(), take peer->rtt_input_lock around the access to the RTT buffer. Don't need to lock around setting peer->rtt. For reference, the inventory of state-accessing or state-altering functions used by the packet input procedure is: > rxrpc_input_packet() * PACKET CHECKING * ROUTING > rxrpc_post_packet_to_local() > rxrpc_find_connection_rcu() - uses RCU > rxrpc_lookup_peer_rcu() - uses RCU > rxrpc_find_service_conn_rcu() - uses RCU > idr_find() - uses RCU * CONNECTION-LEVEL PROCESSING - Service upgrade - Can only happen once per conn ! Changed to use cmpxchg > rxrpc_post_packet_to_conn() - Setting conn->hi_serial - Probably safe not using locks - Maybe use cmpxchg * CALL-LEVEL PROCESSING > Old-call checking > rxrpc_input_implicit_end_call() > rxrpc_call_completed() > rxrpc_queue_call() ! Need to take rx->incoming_lock > __rxrpc_disconnect_call() > rxrpc_notify_socket() > rxrpc_new_incoming_call() - Uses rx->incoming_lock for the entire process - Might be able to drop this earlier in favour of the call lock > rxrpc_incoming_call() ! Conflicts with rxrpc_input_implicit_end_call() > rxrpc_send_ping() - Don't need locks to check rtt state > rxrpc_propose_ACK * PACKET DISTRIBUTION > rxrpc_input_call_packet() > rxrpc_input_data() * QUEUE DATA PACKET ON CALL > rxrpc_reduce_call_timer() - Uses timer_reduce() ! Needs call->input_lock() > rxrpc_receiving_reply() ! Needs locking around ack state > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_proto_abort() > rxrpc_input_dup_data() - Fills the Rx buffer - rxrpc_propose_ACK() - rxrpc_notify_socket() > rxrpc_input_ack() * APPLY ACK PACKET TO CALL AND DISCARD PACKET > rxrpc_input_ping_response() - Probably doesn't need any extra locking ! Need READ_ONCE() on call->ping_serial > rxrpc_input_check_for_lost_ack() - Takes call->lock to consult Tx buffer > rxrpc_peer_add_rtt() ! Needs to take a lock (peer->rtt_input_lock) ! Could perhaps manage with cmpxchg() and xadd() instead > rxrpc_input_requested_ack - Consults Tx buffer ! Probably needs a lock > rxrpc_peer_add_rtt() > rxrpc_propose_ack() > rxrpc_input_ackinfo() - Changes call->tx_winsize ! Use cmpxchg to handle change ! Should perhaps track serial number - Uses peer->lock to record MTU specification changes > rxrpc_proto_abort() ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_input_soft_acks() - Consults the Tx buffer > rxrpc_congestion_management() - Modifies the Tx annotations ! Needs call->input_lock() > rxrpc_queue_call() > rxrpc_input_abort() * APPLY ABORT PACKET TO CALL AND DISCARD PACKET > rxrpc_set_call_completion() > rxrpc_notify_socket() > rxrpc_input_ackall() * APPLY ACKALL PACKET TO CALL AND DISCARD PACKET ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_reject_packet() There are some functions used by the above that queue the packet, after which the procedure is terminated: - rxrpc_post_packet_to_local() - local->event_queue is an sk_buff_head - local->processor is a work_struct - rxrpc_post_packet_to_conn() - conn->rx_queue is an sk_buff_head - conn->processor is a work_struct - rxrpc_reject_packet() - local->reject_queue is an sk_buff_head - local->processor is a work_struct And some that offload processing to process context: - rxrpc_notify_socket() - Uses RCU lock - Uses call->notify_lock to call call->notify_rx - Uses call->recvmsg_lock to queue recvmsg side - rxrpc_queue_call() - call->processor is a work_struct - rxrpc_propose_ACK() - Uses call->lock to wrap __rxrpc_propose_ACK() And a bunch that complete a call, all of which use call->state_lock to protect the call state: - rxrpc_call_completed() - rxrpc_set_call_completion() - rxrpc_abort_call() - rxrpc_proto_abort() - Also uses rxrpc_queue_call() Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-08 22:46:25 +08:00
spin_lock(&peer->rtt_input_lock);
rxrpc: Add per-peer RTT tracker Add a function to track the average RTT for a peer. Sources of RTT data will be added in subsequent patches. The RTT data will be useful in the future for determining resend timeouts and for handling the slow-start part of the Rx protocol. Also add a pair of tracepoints, one to log transmissions to elicit a response for RTT purposes and one to log responses that contribute RTT data. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-22 07:41:53 +08:00
/* Replace the oldest datum in the RTT buffer */
sum -= peer->rtt_cache[cursor];
sum += rtt;
peer->rtt_cache[cursor] = rtt;
peer->rtt_cursor = (cursor + 1) & (RXRPC_RTT_CACHE_SIZE - 1);
peer->rtt_sum = sum;
if (usage < RXRPC_RTT_CACHE_SIZE) {
usage++;
peer->rtt_usage = usage;
}
rxrpc: Fix the packet reception routine The rxrpc_input_packet() function and its call tree was built around the assumption that data_ready() handler called from UDP to inform a kernel service that there is data to be had was non-reentrant. This means that certain locking could be dispensed with. This, however, turns out not to be the case with a multi-queue network card that can deliver packets to multiple cpus simultaneously. Each of those cpus can be in the rxrpc_input_packet() function at the same time. Fix by adding or changing some structure members: (1) Add peer->rtt_input_lock to serialise access to the RTT buffer. (2) Make conn->service_id into a 32-bit variable so that it can be cmpxchg'd on all arches. (3) Add call->input_lock to serialise access to the Rx/Tx state. Note that although the Rx and Tx states are (almost) entirely separate, there's no point completing the separation and having separate locks since it's a bi-phasal RPC protocol rather than a bi-direction streaming protocol. Data transmission and data reception do not take place simultaneously on any particular call. and making the following functional changes: (1) In rxrpc_input_data(), hold call->input_lock around the core to prevent simultaneous producing of packets into the Rx ring and updating of tracking state for a particular call. (2) In rxrpc_input_ping_response(), only read call->ping_serial once, and check it before checking RXRPC_CALL_PINGING as that's a cheaper test. The bit test and bit clear can then be combined. No further locking is needed here. (3) In rxrpc_input_ack(), take call->input_lock after we've parsed much of the ACK packet. The superseded ACK check is then done both before and after the lock is taken. The handing of ackinfo data is split, parsing before the lock is taken and processing with it held. This is keyed on rxMTU being non-zero. Congestion management is also done within the locked section. (4) In rxrpc_input_ackall(), take call->input_lock around the Tx window rotation. The ACKALL packet carries no information and is only really useful after all packets have been transmitted since it's imprecise. (5) In rxrpc_input_implicit_end_call(), we use rx->incoming_lock to prevent calls being simultaneously implicitly ended on two cpus and also to prevent any races with incoming call setup. (6) In rxrpc_input_packet(), use cmpxchg() to effect the service upgrade on a connection. It is only permitted to happen once for a connection. (7) In rxrpc_new_incoming_call(), we have to recheck the routing inside rx->incoming_lock to see if someone else set up the call, connection or peer whilst we were getting there. We can't trust the values from the earlier routing check unless we pin refs on them - which we want to avoid. Further, we need to allow for an incoming call to have its state changed on another CPU between us making it live and us adjusting it because the conn is now in the RXRPC_CONN_SERVICE state. (8) In rxrpc_peer_add_rtt(), take peer->rtt_input_lock around the access to the RTT buffer. Don't need to lock around setting peer->rtt. For reference, the inventory of state-accessing or state-altering functions used by the packet input procedure is: > rxrpc_input_packet() * PACKET CHECKING * ROUTING > rxrpc_post_packet_to_local() > rxrpc_find_connection_rcu() - uses RCU > rxrpc_lookup_peer_rcu() - uses RCU > rxrpc_find_service_conn_rcu() - uses RCU > idr_find() - uses RCU * CONNECTION-LEVEL PROCESSING - Service upgrade - Can only happen once per conn ! Changed to use cmpxchg > rxrpc_post_packet_to_conn() - Setting conn->hi_serial - Probably safe not using locks - Maybe use cmpxchg * CALL-LEVEL PROCESSING > Old-call checking > rxrpc_input_implicit_end_call() > rxrpc_call_completed() > rxrpc_queue_call() ! Need to take rx->incoming_lock > __rxrpc_disconnect_call() > rxrpc_notify_socket() > rxrpc_new_incoming_call() - Uses rx->incoming_lock for the entire process - Might be able to drop this earlier in favour of the call lock > rxrpc_incoming_call() ! Conflicts with rxrpc_input_implicit_end_call() > rxrpc_send_ping() - Don't need locks to check rtt state > rxrpc_propose_ACK * PACKET DISTRIBUTION > rxrpc_input_call_packet() > rxrpc_input_data() * QUEUE DATA PACKET ON CALL > rxrpc_reduce_call_timer() - Uses timer_reduce() ! Needs call->input_lock() > rxrpc_receiving_reply() ! Needs locking around ack state > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_proto_abort() > rxrpc_input_dup_data() - Fills the Rx buffer - rxrpc_propose_ACK() - rxrpc_notify_socket() > rxrpc_input_ack() * APPLY ACK PACKET TO CALL AND DISCARD PACKET > rxrpc_input_ping_response() - Probably doesn't need any extra locking ! Need READ_ONCE() on call->ping_serial > rxrpc_input_check_for_lost_ack() - Takes call->lock to consult Tx buffer > rxrpc_peer_add_rtt() ! Needs to take a lock (peer->rtt_input_lock) ! Could perhaps manage with cmpxchg() and xadd() instead > rxrpc_input_requested_ack - Consults Tx buffer ! Probably needs a lock > rxrpc_peer_add_rtt() > rxrpc_propose_ack() > rxrpc_input_ackinfo() - Changes call->tx_winsize ! Use cmpxchg to handle change ! Should perhaps track serial number - Uses peer->lock to record MTU specification changes > rxrpc_proto_abort() ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_input_soft_acks() - Consults the Tx buffer > rxrpc_congestion_management() - Modifies the Tx annotations ! Needs call->input_lock() > rxrpc_queue_call() > rxrpc_input_abort() * APPLY ABORT PACKET TO CALL AND DISCARD PACKET > rxrpc_set_call_completion() > rxrpc_notify_socket() > rxrpc_input_ackall() * APPLY ACKALL PACKET TO CALL AND DISCARD PACKET ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_reject_packet() There are some functions used by the above that queue the packet, after which the procedure is terminated: - rxrpc_post_packet_to_local() - local->event_queue is an sk_buff_head - local->processor is a work_struct - rxrpc_post_packet_to_conn() - conn->rx_queue is an sk_buff_head - conn->processor is a work_struct - rxrpc_reject_packet() - local->reject_queue is an sk_buff_head - local->processor is a work_struct And some that offload processing to process context: - rxrpc_notify_socket() - Uses RCU lock - Uses call->notify_lock to call call->notify_rx - Uses call->recvmsg_lock to queue recvmsg side - rxrpc_queue_call() - call->processor is a work_struct - rxrpc_propose_ACK() - Uses call->lock to wrap __rxrpc_propose_ACK() And a bunch that complete a call, all of which use call->state_lock to protect the call state: - rxrpc_call_completed() - rxrpc_set_call_completion() - rxrpc_abort_call() - rxrpc_proto_abort() - Also uses rxrpc_queue_call() Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-08 22:46:25 +08:00
spin_unlock(&peer->rtt_input_lock);
rxrpc: Add per-peer RTT tracker Add a function to track the average RTT for a peer. Sources of RTT data will be added in subsequent patches. The RTT data will be useful in the future for determining resend timeouts and for handling the slow-start part of the Rx protocol. Also add a pair of tracepoints, one to log transmissions to elicit a response for RTT purposes and one to log responses that contribute RTT data. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-22 07:41:53 +08:00
/* Now recalculate the average */
if (usage == RXRPC_RTT_CACHE_SIZE) {
avg = sum / RXRPC_RTT_CACHE_SIZE;
} else {
avg = sum;
do_div(avg, usage);
}
rxrpc: Fix the packet reception routine The rxrpc_input_packet() function and its call tree was built around the assumption that data_ready() handler called from UDP to inform a kernel service that there is data to be had was non-reentrant. This means that certain locking could be dispensed with. This, however, turns out not to be the case with a multi-queue network card that can deliver packets to multiple cpus simultaneously. Each of those cpus can be in the rxrpc_input_packet() function at the same time. Fix by adding or changing some structure members: (1) Add peer->rtt_input_lock to serialise access to the RTT buffer. (2) Make conn->service_id into a 32-bit variable so that it can be cmpxchg'd on all arches. (3) Add call->input_lock to serialise access to the Rx/Tx state. Note that although the Rx and Tx states are (almost) entirely separate, there's no point completing the separation and having separate locks since it's a bi-phasal RPC protocol rather than a bi-direction streaming protocol. Data transmission and data reception do not take place simultaneously on any particular call. and making the following functional changes: (1) In rxrpc_input_data(), hold call->input_lock around the core to prevent simultaneous producing of packets into the Rx ring and updating of tracking state for a particular call. (2) In rxrpc_input_ping_response(), only read call->ping_serial once, and check it before checking RXRPC_CALL_PINGING as that's a cheaper test. The bit test and bit clear can then be combined. No further locking is needed here. (3) In rxrpc_input_ack(), take call->input_lock after we've parsed much of the ACK packet. The superseded ACK check is then done both before and after the lock is taken. The handing of ackinfo data is split, parsing before the lock is taken and processing with it held. This is keyed on rxMTU being non-zero. Congestion management is also done within the locked section. (4) In rxrpc_input_ackall(), take call->input_lock around the Tx window rotation. The ACKALL packet carries no information and is only really useful after all packets have been transmitted since it's imprecise. (5) In rxrpc_input_implicit_end_call(), we use rx->incoming_lock to prevent calls being simultaneously implicitly ended on two cpus and also to prevent any races with incoming call setup. (6) In rxrpc_input_packet(), use cmpxchg() to effect the service upgrade on a connection. It is only permitted to happen once for a connection. (7) In rxrpc_new_incoming_call(), we have to recheck the routing inside rx->incoming_lock to see if someone else set up the call, connection or peer whilst we were getting there. We can't trust the values from the earlier routing check unless we pin refs on them - which we want to avoid. Further, we need to allow for an incoming call to have its state changed on another CPU between us making it live and us adjusting it because the conn is now in the RXRPC_CONN_SERVICE state. (8) In rxrpc_peer_add_rtt(), take peer->rtt_input_lock around the access to the RTT buffer. Don't need to lock around setting peer->rtt. For reference, the inventory of state-accessing or state-altering functions used by the packet input procedure is: > rxrpc_input_packet() * PACKET CHECKING * ROUTING > rxrpc_post_packet_to_local() > rxrpc_find_connection_rcu() - uses RCU > rxrpc_lookup_peer_rcu() - uses RCU > rxrpc_find_service_conn_rcu() - uses RCU > idr_find() - uses RCU * CONNECTION-LEVEL PROCESSING - Service upgrade - Can only happen once per conn ! Changed to use cmpxchg > rxrpc_post_packet_to_conn() - Setting conn->hi_serial - Probably safe not using locks - Maybe use cmpxchg * CALL-LEVEL PROCESSING > Old-call checking > rxrpc_input_implicit_end_call() > rxrpc_call_completed() > rxrpc_queue_call() ! Need to take rx->incoming_lock > __rxrpc_disconnect_call() > rxrpc_notify_socket() > rxrpc_new_incoming_call() - Uses rx->incoming_lock for the entire process - Might be able to drop this earlier in favour of the call lock > rxrpc_incoming_call() ! Conflicts with rxrpc_input_implicit_end_call() > rxrpc_send_ping() - Don't need locks to check rtt state > rxrpc_propose_ACK * PACKET DISTRIBUTION > rxrpc_input_call_packet() > rxrpc_input_data() * QUEUE DATA PACKET ON CALL > rxrpc_reduce_call_timer() - Uses timer_reduce() ! Needs call->input_lock() > rxrpc_receiving_reply() ! Needs locking around ack state > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_proto_abort() > rxrpc_input_dup_data() - Fills the Rx buffer - rxrpc_propose_ACK() - rxrpc_notify_socket() > rxrpc_input_ack() * APPLY ACK PACKET TO CALL AND DISCARD PACKET > rxrpc_input_ping_response() - Probably doesn't need any extra locking ! Need READ_ONCE() on call->ping_serial > rxrpc_input_check_for_lost_ack() - Takes call->lock to consult Tx buffer > rxrpc_peer_add_rtt() ! Needs to take a lock (peer->rtt_input_lock) ! Could perhaps manage with cmpxchg() and xadd() instead > rxrpc_input_requested_ack - Consults Tx buffer ! Probably needs a lock > rxrpc_peer_add_rtt() > rxrpc_propose_ack() > rxrpc_input_ackinfo() - Changes call->tx_winsize ! Use cmpxchg to handle change ! Should perhaps track serial number - Uses peer->lock to record MTU specification changes > rxrpc_proto_abort() ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_input_soft_acks() - Consults the Tx buffer > rxrpc_congestion_management() - Modifies the Tx annotations ! Needs call->input_lock() > rxrpc_queue_call() > rxrpc_input_abort() * APPLY ABORT PACKET TO CALL AND DISCARD PACKET > rxrpc_set_call_completion() > rxrpc_notify_socket() > rxrpc_input_ackall() * APPLY ACKALL PACKET TO CALL AND DISCARD PACKET ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_reject_packet() There are some functions used by the above that queue the packet, after which the procedure is terminated: - rxrpc_post_packet_to_local() - local->event_queue is an sk_buff_head - local->processor is a work_struct - rxrpc_post_packet_to_conn() - conn->rx_queue is an sk_buff_head - conn->processor is a work_struct - rxrpc_reject_packet() - local->reject_queue is an sk_buff_head - local->processor is a work_struct And some that offload processing to process context: - rxrpc_notify_socket() - Uses RCU lock - Uses call->notify_lock to call call->notify_rx - Uses call->recvmsg_lock to queue recvmsg side - rxrpc_queue_call() - call->processor is a work_struct - rxrpc_propose_ACK() - Uses call->lock to wrap __rxrpc_propose_ACK() And a bunch that complete a call, all of which use call->state_lock to protect the call state: - rxrpc_call_completed() - rxrpc_set_call_completion() - rxrpc_abort_call() - rxrpc_proto_abort() - Also uses rxrpc_queue_call() Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-08 22:46:25 +08:00
/* Don't need to update this under lock */
rxrpc: Add per-peer RTT tracker Add a function to track the average RTT for a peer. Sources of RTT data will be added in subsequent patches. The RTT data will be useful in the future for determining resend timeouts and for handling the slow-start part of the Rx protocol. Also add a pair of tracepoints, one to log transmissions to elicit a response for RTT purposes and one to log responses that contribute RTT data. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-22 07:41:53 +08:00
peer->rtt = avg;
trace_rxrpc_rtt_rx(call, why, send_serial, resp_serial, rtt,
usage, avg);
}
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
/*
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
* Perform keep-alive pings.
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
*/
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
static void rxrpc_peer_keepalive_dispatch(struct rxrpc_net *rxnet,
struct list_head *collector,
time64_t base,
u8 cursor)
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
{
struct rxrpc_peer *peer;
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
const u8 mask = ARRAY_SIZE(rxnet->peer_keepalive) - 1;
time64_t keepalive_at;
int slot;
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
spin_lock_bh(&rxnet->peer_hash_lock);
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
while (!list_empty(collector)) {
peer = list_entry(collector->next,
struct rxrpc_peer, keepalive_link);
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
list_del_init(&peer->keepalive_link);
if (!rxrpc_get_peer_maybe(peer))
continue;
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix missing active use pinning of rxrpc_local object The introduction of a split between the reference count on rxrpc_local objects and the usage count didn't quite go far enough. A number of kernel work items need to make use of the socket to perform transmission. These also need to get an active count on the local object to prevent the socket from being closed. Fix this by getting the active count in those places. Also split out the raw active count get/put functions as these places tend to hold refs on the rxrpc_local object already, so getting and putting an extra object ref is just a waste of time. The problem can lead to symptoms like: BUG: kernel NULL pointer dereference, address: 0000000000000018 .. CPU: 2 PID: 818 Comm: kworker/u9:0 Not tainted 5.5.0-fscache+ #51 ... RIP: 0010:selinux_socket_sendmsg+0x5/0x13 ... Call Trace: security_socket_sendmsg+0x2c/0x3e sock_sendmsg+0x1a/0x46 rxrpc_send_keepalive+0x131/0x1ae rxrpc_peer_keepalive_worker+0x219/0x34b process_one_work+0x18e/0x271 worker_thread+0x1a3/0x247 kthread+0xe6/0xeb ret_from_fork+0x1f/0x30 Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting") Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-31 05:50:36 +08:00
if (__rxrpc_use_local(peer->local)) {
spin_unlock_bh(&rxnet->peer_hash_lock);
keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME;
slot = keepalive_at - base;
_debug("%02x peer %u t=%d {%pISp}",
cursor, peer->debug_id, slot, &peer->srx.transport);
if (keepalive_at <= base ||
keepalive_at > base + RXRPC_KEEPALIVE_TIME) {
rxrpc_send_keepalive(peer);
slot = RXRPC_KEEPALIVE_TIME;
}
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
rxrpc: Fix missing active use pinning of rxrpc_local object The introduction of a split between the reference count on rxrpc_local objects and the usage count didn't quite go far enough. A number of kernel work items need to make use of the socket to perform transmission. These also need to get an active count on the local object to prevent the socket from being closed. Fix this by getting the active count in those places. Also split out the raw active count get/put functions as these places tend to hold refs on the rxrpc_local object already, so getting and putting an extra object ref is just a waste of time. The problem can lead to symptoms like: BUG: kernel NULL pointer dereference, address: 0000000000000018 .. CPU: 2 PID: 818 Comm: kworker/u9:0 Not tainted 5.5.0-fscache+ #51 ... RIP: 0010:selinux_socket_sendmsg+0x5/0x13 ... Call Trace: security_socket_sendmsg+0x2c/0x3e sock_sendmsg+0x1a/0x46 rxrpc_send_keepalive+0x131/0x1ae rxrpc_peer_keepalive_worker+0x219/0x34b process_one_work+0x18e/0x271 worker_thread+0x1a3/0x247 kthread+0xe6/0xeb ret_from_fork+0x1f/0x30 Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting") Signed-off-by: David Howells <dhowells@redhat.com>
2020-01-31 05:50:36 +08:00
/* A transmission to this peer occurred since last we
* examined it so put it into the appropriate future
* bucket.
*/
slot += cursor;
slot &= mask;
spin_lock_bh(&rxnet->peer_hash_lock);
list_add_tail(&peer->keepalive_link,
&rxnet->peer_keepalive[slot & mask]);
rxrpc_unuse_local(peer->local);
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
}
rxrpc: Fix potential deadlock There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 #41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcfadcee ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
2019-07-30 21:42:50 +08:00
rxrpc_put_peer_locked(peer);
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
}
spin_unlock_bh(&rxnet->peer_hash_lock);
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
}
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
/*
* Perform keep-alive pings with VERSION packets to keep any NAT alive.
*/
void rxrpc_peer_keepalive_worker(struct work_struct *work)
{
struct rxrpc_net *rxnet =
container_of(work, struct rxrpc_net, peer_keepalive_work);
const u8 mask = ARRAY_SIZE(rxnet->peer_keepalive) - 1;
time64_t base, now, delay;
u8 cursor, stop;
LIST_HEAD(collector);
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
now = ktime_get_seconds();
base = rxnet->peer_keepalive_base;
cursor = rxnet->peer_keepalive_cursor;
_enter("%lld,%u", base - now, cursor);
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
if (!rxnet->live)
return;
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
/* Remove to a temporary list all the peers that are currently lodged
* in expired buckets plus all new peers.
*
* Everything in the bucket at the cursor is processed this
* second; the bucket at cursor + 1 goes at now + 1s and so
* on...
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
*/
spin_lock_bh(&rxnet->peer_hash_lock);
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
list_splice_init(&rxnet->peer_keepalive_new, &collector);
stop = cursor + ARRAY_SIZE(rxnet->peer_keepalive);
while (base <= now && (s8)(cursor - stop) < 0) {
list_splice_tail_init(&rxnet->peer_keepalive[cursor & mask],
&collector);
base++;
cursor++;
}
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
base = now;
spin_unlock_bh(&rxnet->peer_hash_lock);
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
rxnet->peer_keepalive_base = base;
rxnet->peer_keepalive_cursor = cursor;
rxrpc: Fix the keepalive generator [ver #2] AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08 18:30:02 +08:00
rxrpc_peer_keepalive_dispatch(rxnet, &collector, base, cursor);
ASSERT(list_empty(&collector));
/* Schedule the timer for the next occupied timeslot. */
cursor = rxnet->peer_keepalive_cursor;
stop = cursor + RXRPC_KEEPALIVE_TIME - 1;
for (; (s8)(cursor - stop) < 0; cursor++) {
if (!list_empty(&rxnet->peer_keepalive[cursor & mask]))
break;
base++;
}
now = ktime_get_seconds();
delay = base - now;
if (delay < 1)
delay = 1;
delay *= HZ;
if (rxnet->live)
timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay);
rxrpc: Fix firewall route keepalive Fix the firewall route keepalive part of AF_RXRPC which is currently function incorrectly by replying to VERSION REPLY packets from the server with VERSION REQUEST packets. Instead, send VERSION REPLY packets to the peers of service connections to act as keep-alives 20s after the latest packet was transmitted to that peer. Also, just discard VERSION REPLY packets rather than replying to them. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-31 04:04:43 +08:00
_leave("");
}