OpenCloudOS-Kernel/net/core/page_pool.c

752 lines
20 KiB
C
Raw Normal View History

page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* SPDX-License-Identifier: GPL-2.0
*
* page_pool.c
* Author: Jesper Dangaard Brouer <netoptimizer@brouer.com>
* Copyright (C) 2016 Red Hat, Inc.
*/
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/device.h>
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
#include <net/page_pool.h>
#include <net/xdp.h>
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
#include <linux/dma-direction.h>
#include <linux/dma-mapping.h>
#include <linux/page-flags.h>
#include <linux/mm.h> /* for __put_page() */
#include <linux/poison.h>
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
#include <trace/events/page_pool.h>
#define DEFER_TIME (msecs_to_jiffies(1000))
#define DEFER_WARN_INTERVAL (60 * HZ)
#define BIAS_MAX LONG_MAX
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
static int page_pool_init(struct page_pool *pool,
const struct page_pool_params *params)
{
unsigned int ring_qsize = 1024; /* Default */
memcpy(&pool->p, params, sizeof(pool->p));
/* Validate only known flags were used */
if (pool->p.flags & ~(PP_FLAG_ALL))
return -EINVAL;
if (pool->p.pool_size)
ring_qsize = pool->p.pool_size;
/* Sanity limit mem that can be pinned down */
if (ring_qsize > 32768)
return -E2BIG;
/* DMA direction is either DMA_FROM_DEVICE or DMA_BIDIRECTIONAL.
* DMA_BIDIRECTIONAL is for allowing page used for DMA sending,
* which is the XDP_TX use-case.
*/
if ((pool->p.dma_dir != DMA_FROM_DEVICE) &&
(pool->p.dma_dir != DMA_BIDIRECTIONAL))
return -EINVAL;
net: page_pool: add the possibility to sync DMA memory for device Introduce the following parameters in order to add the possibility to sync DMA memory for device before putting allocated pages in the page_pool caches: - PP_FLAG_DMA_SYNC_DEV: if set in page_pool_params flags, all pages that the driver gets from page_pool will be DMA-synced-for-device according to the length provided by the device driver. Please note DMA-sync-for-CPU is still device driver responsibility - offset: DMA address offset where the DMA engine starts copying rx data - max_len: maximum DMA memory size page_pool is allowed to flush. This is currently used in __page_pool_alloc_pages_slow routine when pages are allocated from page allocator These parameters are supposed to be set by device drivers. This optimization reduces the length of the DMA-sync-for-device. The optimization is valid because pages are initially DMA-synced-for-device as defined via max_len. At RX time, the driver will perform a DMA-sync-for-CPU on the memory for the packet length. What is important is the memory occupied by packet payload, because this is the area CPU is allowed to read and modify. As we don't track cache-lines written into by the CPU, simply use the packet payload length as dma_sync_size at page_pool recycle time. This also take into account any tail-extend. Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-11-20 22:54:18 +08:00
if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV) {
/* In order to request DMA-sync-for-device the page
* needs to be mapped
*/
if (!(pool->p.flags & PP_FLAG_DMA_MAP))
return -EINVAL;
if (!pool->p.max_len)
return -EINVAL;
/* pool->p.offset has to be set according to the address
* offset used by the DMA engine to start copying rx data
*/
}
if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT &&
pool->p.flags & PP_FLAG_PAGE_FRAG)
return -EINVAL;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
if (ptr_ring_init(&pool->ring, ring_qsize, GFP_KERNEL) < 0)
return -ENOMEM;
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
atomic_set(&pool->pages_state_release_cnt, 0);
2019-07-09 05:34:28 +08:00
/* Driver calling page_pool_create() also call page_pool_destroy() */
refcount_set(&pool->user_cnt, 1);
if (pool->p.flags & PP_FLAG_DMA_MAP)
get_device(pool->p.dev);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
return 0;
}
struct page_pool *page_pool_create(const struct page_pool_params *params)
{
struct page_pool *pool;
int err;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
pool = kzalloc_node(sizeof(*pool), GFP_KERNEL, params->nid);
if (!pool)
return ERR_PTR(-ENOMEM);
err = page_pool_init(pool, params);
if (err < 0) {
pr_warn("%s() gave up with errno %d\n", __func__, err);
kfree(pool);
return ERR_PTR(err);
}
2019-07-09 05:34:28 +08:00
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
return pool;
}
EXPORT_SYMBOL(page_pool_create);
static void page_pool_return_page(struct page_pool *pool, struct page *page);
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
noinline
static struct page *page_pool_refill_alloc_cache(struct page_pool *pool)
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
{
struct ptr_ring *r = &pool->ring;
struct page *page;
int pref_nid; /* preferred NUMA node */
/* Quicker fallback, avoid locks when ring is empty */
if (__ptr_ring_empty(r))
return NULL;
/* Softirq guarantee CPU and thus NUMA node is stable. This,
* assumes CPU refilling driver RX-ring will also run RX-NAPI.
*/
#ifdef CONFIG_NUMA
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
pref_nid = (pool->p.nid == NUMA_NO_NODE) ? numa_mem_id() : pool->p.nid;
#else
/* Ignore pool->p.nid setting if !CONFIG_NUMA, helps compiler */
pref_nid = numa_mem_id(); /* will be zero like page_to_nid() */
#endif
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
/* Slower-path: Get pages from locked ring queue */
spin_lock(&r->consumer_lock);
/* Refill alloc array, but only if NUMA match */
do {
page = __ptr_ring_consume(r);
if (unlikely(!page))
break;
if (likely(page_to_nid(page) == pref_nid)) {
pool->alloc.cache[pool->alloc.count++] = page;
} else {
/* NUMA mismatch;
* (1) release 1 page to page-allocator and
* (2) break out to fallthrough to alloc_pages_node.
* This limit stress on page buddy alloactor.
*/
page_pool_return_page(pool, page);
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
page = NULL;
break;
}
} while (pool->alloc.count < PP_ALLOC_CACHE_REFILL);
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
/* Return last page */
if (likely(pool->alloc.count > 0))
page = pool->alloc.cache[--pool->alloc.count];
spin_unlock(&r->consumer_lock);
return page;
}
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* fast path */
static struct page *__page_pool_get_cached(struct page_pool *pool)
{
struct page *page;
/* Caller MUST guarantee safe non-concurrent access, e.g. softirq */
if (likely(pool->alloc.count)) {
/* Fast-path */
page = pool->alloc.cache[--pool->alloc.count];
} else {
page = page_pool_refill_alloc_cache(pool);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
}
return page;
}
net: page_pool: add the possibility to sync DMA memory for device Introduce the following parameters in order to add the possibility to sync DMA memory for device before putting allocated pages in the page_pool caches: - PP_FLAG_DMA_SYNC_DEV: if set in page_pool_params flags, all pages that the driver gets from page_pool will be DMA-synced-for-device according to the length provided by the device driver. Please note DMA-sync-for-CPU is still device driver responsibility - offset: DMA address offset where the DMA engine starts copying rx data - max_len: maximum DMA memory size page_pool is allowed to flush. This is currently used in __page_pool_alloc_pages_slow routine when pages are allocated from page allocator These parameters are supposed to be set by device drivers. This optimization reduces the length of the DMA-sync-for-device. The optimization is valid because pages are initially DMA-synced-for-device as defined via max_len. At RX time, the driver will perform a DMA-sync-for-CPU on the memory for the packet length. What is important is the memory occupied by packet payload, because this is the area CPU is allowed to read and modify. As we don't track cache-lines written into by the CPU, simply use the packet payload length as dma_sync_size at page_pool recycle time. This also take into account any tail-extend. Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-11-20 22:54:18 +08:00
static void page_pool_dma_sync_for_device(struct page_pool *pool,
struct page *page,
unsigned int dma_sync_size)
{
dma_sync_size = min(dma_sync_size, pool->p.max_len);
dma_sync_single_range_for_device(pool->p.dev, page->dma_addr,
pool->p.offset, dma_sync_size,
pool->p.dma_dir);
}
static bool page_pool_dma_map(struct page_pool *pool, struct page *page)
{
dma_addr_t dma;
/* Setup DMA mapping: use 'struct page' area for storing DMA-addr
* since dma_addr_t can be either 32 or 64 bits and does not always fit
* into page private data (i.e 32bit cpu with 64bit DMA caps)
* This mapping is kept for lifetime of page, until leaving pool.
*/
dma = dma_map_page_attrs(pool->p.dev, page, 0,
(PAGE_SIZE << pool->p.order),
pool->p.dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
if (dma_mapping_error(pool->p.dev, dma))
return false;
page->dma_addr = dma;
if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV)
page_pool_dma_sync_for_device(pool, page, pool->p.max_len);
return true;
}
static void page_pool_set_pp_info(struct page_pool *pool,
struct page *page)
{
page->pp = pool;
page->pp_magic |= PP_SIGNATURE;
}
static void page_pool_clear_pp_info(struct page *page)
{
page->pp_magic = 0;
page->pp = NULL;
}
net: page_pool: use alloc_pages_bulk in refill code path There are cases where the page_pool need to refill with pages from the page allocator. Some workloads cause the page_pool to release pages instead of recycling these pages. For these workload it can improve performance to bulk alloc pages from the page-allocator to refill the alloc cache. For XDP-redirect workload with 100G mlx5 driver (that use page_pool) redirecting xdp_frame packets into a veth, that does XDP_PASS to create an SKB from the xdp_frame, which then cannot return the page to the page_pool. Performance results under GitHub xdp-project[1]: [1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array variant" was squashed with this patch. From the test page, the array variant was superior with one of the test results as follows. Kernel XDP stats CPU pps Delta Baseline XDP-RX CPU total 3,771,046 n/a List XDP-RX CPU total 3,940,242 +4.49% Array XDP-RX CPU total 4,249,224 +12.68% Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2021-04-30 14:02:07 +08:00
static struct page *__page_pool_alloc_page_order(struct page_pool *pool,
gfp_t gfp)
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
{
struct page *page;
net: page_pool: use alloc_pages_bulk in refill code path There are cases where the page_pool need to refill with pages from the page allocator. Some workloads cause the page_pool to release pages instead of recycling these pages. For these workload it can improve performance to bulk alloc pages from the page-allocator to refill the alloc cache. For XDP-redirect workload with 100G mlx5 driver (that use page_pool) redirecting xdp_frame packets into a veth, that does XDP_PASS to create an SKB from the xdp_frame, which then cannot return the page to the page_pool. Performance results under GitHub xdp-project[1]: [1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array variant" was squashed with this patch. From the test page, the array variant was superior with one of the test results as follows. Kernel XDP stats CPU pps Delta Baseline XDP-RX CPU total 3,771,046 n/a List XDP-RX CPU total 3,940,242 +4.49% Array XDP-RX CPU total 4,249,224 +12.68% Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2021-04-30 14:02:07 +08:00
gfp |= __GFP_COMP;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
page = alloc_pages_node(pool->p.nid, gfp, pool->p.order);
net: page_pool: use alloc_pages_bulk in refill code path There are cases where the page_pool need to refill with pages from the page allocator. Some workloads cause the page_pool to release pages instead of recycling these pages. For these workload it can improve performance to bulk alloc pages from the page-allocator to refill the alloc cache. For XDP-redirect workload with 100G mlx5 driver (that use page_pool) redirecting xdp_frame packets into a veth, that does XDP_PASS to create an SKB from the xdp_frame, which then cannot return the page to the page_pool. Performance results under GitHub xdp-project[1]: [1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array variant" was squashed with this patch. From the test page, the array variant was superior with one of the test results as follows. Kernel XDP stats CPU pps Delta Baseline XDP-RX CPU total 3,771,046 n/a List XDP-RX CPU total 3,940,242 +4.49% Array XDP-RX CPU total 4,249,224 +12.68% Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2021-04-30 14:02:07 +08:00
if (unlikely(!page))
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
return NULL;
net: page_pool: use alloc_pages_bulk in refill code path There are cases where the page_pool need to refill with pages from the page allocator. Some workloads cause the page_pool to release pages instead of recycling these pages. For these workload it can improve performance to bulk alloc pages from the page-allocator to refill the alloc cache. For XDP-redirect workload with 100G mlx5 driver (that use page_pool) redirecting xdp_frame packets into a veth, that does XDP_PASS to create an SKB from the xdp_frame, which then cannot return the page to the page_pool. Performance results under GitHub xdp-project[1]: [1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array variant" was squashed with this patch. From the test page, the array variant was superior with one of the test results as follows. Kernel XDP stats CPU pps Delta Baseline XDP-RX CPU total 3,771,046 n/a List XDP-RX CPU total 3,940,242 +4.49% Array XDP-RX CPU total 4,249,224 +12.68% Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2021-04-30 14:02:07 +08:00
if ((pool->p.flags & PP_FLAG_DMA_MAP) &&
unlikely(!page_pool_dma_map(pool, page))) {
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
put_page(page);
return NULL;
}
page_pool_set_pp_info(pool, page);
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
/* Track how many pages are held 'in-flight' */
pool->pages_state_hold_cnt++;
trace_page_pool_state_hold(pool, page, pool->pages_state_hold_cnt);
net: page_pool: use alloc_pages_bulk in refill code path There are cases where the page_pool need to refill with pages from the page allocator. Some workloads cause the page_pool to release pages instead of recycling these pages. For these workload it can improve performance to bulk alloc pages from the page-allocator to refill the alloc cache. For XDP-redirect workload with 100G mlx5 driver (that use page_pool) redirecting xdp_frame packets into a veth, that does XDP_PASS to create an SKB from the xdp_frame, which then cannot return the page to the page_pool. Performance results under GitHub xdp-project[1]: [1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array variant" was squashed with this patch. From the test page, the array variant was superior with one of the test results as follows. Kernel XDP stats CPU pps Delta Baseline XDP-RX CPU total 3,771,046 n/a List XDP-RX CPU total 3,940,242 +4.49% Array XDP-RX CPU total 4,249,224 +12.68% Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2021-04-30 14:02:07 +08:00
return page;
}
/* slow path */
noinline
static struct page *__page_pool_alloc_pages_slow(struct page_pool *pool,
gfp_t gfp)
{
const int bulk = PP_ALLOC_CACHE_REFILL;
unsigned int pp_flags = pool->p.flags;
unsigned int pp_order = pool->p.order;
struct page *page;
int i, nr_pages;
/* Don't support bulk alloc for high-order pages */
if (unlikely(pp_order))
return __page_pool_alloc_page_order(pool, gfp);
/* Unnecessary as alloc cache is empty, but guarantees zero count */
if (unlikely(pool->alloc.count > 0))
return pool->alloc.cache[--pool->alloc.count];
/* Mark empty alloc.cache slots "empty" for alloc_pages_bulk_array */
memset(&pool->alloc.cache, 0, sizeof(void *) * bulk);
nr_pages = alloc_pages_bulk_array(gfp, bulk, pool->alloc.cache);
if (unlikely(!nr_pages))
return NULL;
/* Pages have been filled into alloc.cache array, but count is zero and
* page element have not been (possibly) DMA mapped.
*/
for (i = 0; i < nr_pages; i++) {
page = pool->alloc.cache[i];
if ((pp_flags & PP_FLAG_DMA_MAP) &&
unlikely(!page_pool_dma_map(pool, page))) {
put_page(page);
continue;
}
page_pool_set_pp_info(pool, page);
net: page_pool: use alloc_pages_bulk in refill code path There are cases where the page_pool need to refill with pages from the page allocator. Some workloads cause the page_pool to release pages instead of recycling these pages. For these workload it can improve performance to bulk alloc pages from the page-allocator to refill the alloc cache. For XDP-redirect workload with 100G mlx5 driver (that use page_pool) redirecting xdp_frame packets into a veth, that does XDP_PASS to create an SKB from the xdp_frame, which then cannot return the page to the page_pool. Performance results under GitHub xdp-project[1]: [1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array variant" was squashed with this patch. From the test page, the array variant was superior with one of the test results as follows. Kernel XDP stats CPU pps Delta Baseline XDP-RX CPU total 3,771,046 n/a List XDP-RX CPU total 3,940,242 +4.49% Array XDP-RX CPU total 4,249,224 +12.68% Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2021-04-30 14:02:07 +08:00
pool->alloc.cache[pool->alloc.count++] = page;
/* Track how many pages are held 'in-flight' */
pool->pages_state_hold_cnt++;
trace_page_pool_state_hold(pool, page,
pool->pages_state_hold_cnt);
}
/* Return last page */
if (likely(pool->alloc.count > 0))
page = pool->alloc.cache[--pool->alloc.count];
else
page = NULL;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* When page just alloc'ed is should/must have refcnt 1. */
return page;
}
/* For using page_pool replace: alloc_pages() API calls, but provide
* synchronization guarantee for allocation side.
*/
struct page *page_pool_alloc_pages(struct page_pool *pool, gfp_t gfp)
{
struct page *page;
/* Fast-path: Get a page from cache */
page = __page_pool_get_cached(pool);
if (page)
return page;
/* Slow-path: cache empty, do real allocation */
page = __page_pool_alloc_pages_slow(pool, gfp);
return page;
}
EXPORT_SYMBOL(page_pool_alloc_pages);
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
/* Calculate distance between two u32 values, valid if distance is below 2^(31)
* https://en.wikipedia.org/wiki/Serial_number_arithmetic#General_Solution
*/
#define _distance(a, b) (s32)((a) - (b))
static s32 page_pool_inflight(struct page_pool *pool)
{
u32 release_cnt = atomic_read(&pool->pages_state_release_cnt);
u32 hold_cnt = READ_ONCE(pool->pages_state_hold_cnt);
s32 inflight;
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
inflight = _distance(hold_cnt, release_cnt);
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
trace_page_pool_inflight(pool, inflight, hold_cnt, release_cnt);
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
WARN(inflight < 0, "Negative(%d) inflight packet-pages", inflight);
return inflight;
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
}
/* Disconnects a page (from a page_pool). API users can have a need
* to disconnect a page (from a page_pool), to allow it to be used as
* a regular page (that will eventually be returned to the normal
* page-allocator via put_page).
*/
void page_pool_release_page(struct page_pool *pool, struct page *page)
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
{
dma_addr_t dma;
int count;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
if (!(pool->p.flags & PP_FLAG_DMA_MAP))
/* Always account for inflight pages, even if we didn't
* map them
*/
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
goto skip_dma_unmap;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
dma = page_pool_get_dma_addr(page);
/* When page is unmapped, it cannot be returned our pool */
dma_unmap_page_attrs(pool->p.dev, dma,
PAGE_SIZE << pool->p.order, pool->p.dma_dir,
DMA_ATTR_SKIP_CPU_SYNC);
page_pool_set_dma_addr(page, 0);
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
skip_dma_unmap:
page_pool_clear_pp_info(page);
/* This may be the last page returned, releasing the pool, so
* it is not safe to reference pool afterwards.
*/
count = atomic_inc_return_relaxed(&pool->pages_state_release_cnt);
trace_page_pool_state_release(pool, page, count);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
}
EXPORT_SYMBOL(page_pool_release_page);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* Return a page to the page allocator, cleaning up our state */
static void page_pool_return_page(struct page_pool *pool, struct page *page)
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
{
page_pool_release_page(pool, page);
xdp: tracking page_pool resources and safe removal This patch is needed before we can allow drivers to use page_pool for DMA-mappings. Today with page_pool and XDP return API, it is possible to remove the page_pool object (from rhashtable), while there are still in-flight packet-pages. This is safely handled via RCU and failed lookups in __xdp_return() fallback to call put_page(), when page_pool object is gone. In-case page is still DMA mapped, this will result in page note getting correctly DMA unmapped. To solve this, the page_pool is extended with tracking in-flight pages. And XDP disconnect system queries page_pool and waits, via workqueue, for all in-flight pages to be returned. To avoid killing performance when tracking in-flight pages, the implement use two (unsigned) counters, that in placed on different cache-lines, and can be used to deduct in-flight packets. This is done by mapping the unsigned "sequence" counters onto signed Two's complement arithmetic operations. This is e.g. used by kernel's time_after macros, described in kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982. The trick is these two incrementing counters only need to be read and compared, when checking if it's safe to free the page_pool structure. Which will only happen when driver have disconnected RX/alloc side. Thus, on a non-fast-path. It is chosen that page_pool tracking is also enabled for the non-DMA use-case, as this can be used for statistics later. After this patch, using page_pool requires more strict resource "release", e.g. via page_pool_release_page() that was introduced in this patchset, and previous patches implement/fix this more strict requirement. Drivers no-longer call page_pool_destroy(). Drivers already call xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will attempt to disconnect the mem id, and if attempt fails schedule the disconnect for later via delayed workqueue. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18 21:05:47 +08:00
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
put_page(page);
/* An optimization would be to call __free_pages(page, pool->p.order)
* knowing page is not part of page-cache (thus avoiding a
* __page_cache_release() call).
*/
}
static bool page_pool_recycle_in_ring(struct page_pool *pool, struct page *page)
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
{
int ret;
/* BH protection not needed if current is serving softirq */
if (in_serving_softirq())
ret = ptr_ring_produce(&pool->ring, page);
else
ret = ptr_ring_produce_bh(&pool->ring, page);
return (ret == 0) ? true : false;
}
/* Only allow direct recycling in special circumstances, into the
* alloc side cache. E.g. during RX-NAPI processing for XDP_DROP use-case.
*
* Caller must provide appropriate safe context.
*/
static bool page_pool_recycle_in_cache(struct page *page,
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
struct page_pool *pool)
{
if (unlikely(pool->alloc.count == PP_ALLOC_CACHE_SIZE))
return false;
/* Caller MUST have verified/know (page_ref_count(page) == 1) */
pool->alloc.cache[pool->alloc.count++] = page;
return true;
}
/* If the page refcnt == 1, this will try to recycle the page.
* if PP_FLAG_DMA_SYNC_DEV is set, we'll try to sync the DMA area for
* the configured size min(dma_sync_size, pool->max_len).
* If the page refcnt != 1, then the page will be returned to memory
* subsystem.
*/
static __always_inline struct page *
__page_pool_put_page(struct page_pool *pool, struct page *page,
unsigned int dma_sync_size, bool allow_direct)
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
{
/* It is not the last user for the page frag case */
if (pool->p.flags & PP_FLAG_PAGE_FRAG &&
page_pool_atomic_sub_frag_count_return(page, 1))
return NULL;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* This allocator is optimized for the XDP mode that uses
* one-frame-per-page, but have fallbacks that act like the
* regular page allocator APIs.
*
* refcnt == 1 means page_pool owns page, and can recycle it.
*
* page is NOT reusable when allocated when system is under
* some pressure. (page_is_pfmemalloc)
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
*/
if (likely(page_ref_count(page) == 1 && !page_is_pfmemalloc(page))) {
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* Read barrier done in page_ref_count / READ_ONCE */
net: page_pool: add the possibility to sync DMA memory for device Introduce the following parameters in order to add the possibility to sync DMA memory for device before putting allocated pages in the page_pool caches: - PP_FLAG_DMA_SYNC_DEV: if set in page_pool_params flags, all pages that the driver gets from page_pool will be DMA-synced-for-device according to the length provided by the device driver. Please note DMA-sync-for-CPU is still device driver responsibility - offset: DMA address offset where the DMA engine starts copying rx data - max_len: maximum DMA memory size page_pool is allowed to flush. This is currently used in __page_pool_alloc_pages_slow routine when pages are allocated from page allocator These parameters are supposed to be set by device drivers. This optimization reduces the length of the DMA-sync-for-device. The optimization is valid because pages are initially DMA-synced-for-device as defined via max_len. At RX time, the driver will perform a DMA-sync-for-CPU on the memory for the packet length. What is important is the memory occupied by packet payload, because this is the area CPU is allowed to read and modify. As we don't track cache-lines written into by the CPU, simply use the packet payload length as dma_sync_size at page_pool recycle time. This also take into account any tail-extend. Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-11-20 22:54:18 +08:00
if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV)
page_pool_dma_sync_for_device(pool, page,
dma_sync_size);
if (allow_direct && in_serving_softirq() &&
page_pool_recycle_in_cache(page, pool))
return NULL;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* Page found as candidate for recycling */
return page;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
}
/* Fallback/non-XDP mode: API user have elevated refcnt.
*
* Many drivers split up the page into fragments, and some
* want to keep doing this to save memory and do refcnt based
* recycling. Support this use case too, to ease drivers
* switching between XDP/non-XDP.
*
* In-case page_pool maintains the DMA mapping, API user must
* call page_pool_put_page once. In this elevated refcnt
* case, the DMA is unmapped/released, as driver is likely
* doing refcnt based recycle tricks, meaning another process
* will be invoking put_page.
*/
/* Do not replace this with page_pool_return_page() */
page_pool_release_page(pool, page);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
put_page(page);
return NULL;
}
void page_pool_put_page(struct page_pool *pool, struct page *page,
unsigned int dma_sync_size, bool allow_direct)
{
page = __page_pool_put_page(pool, page, dma_sync_size, allow_direct);
if (page && !page_pool_recycle_in_ring(pool, page)) {
/* Cache full, fallback to free pages */
page_pool_return_page(pool, page);
}
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
}
EXPORT_SYMBOL(page_pool_put_page);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* Caller must not use data area after call, as this function overwrites it */
void page_pool_put_page_bulk(struct page_pool *pool, void **data,
int count)
{
int i, bulk_len = 0;
for (i = 0; i < count; i++) {
struct page *page = virt_to_head_page(data[i]);
page = __page_pool_put_page(pool, page, -1, false);
/* Approved for bulk recycling in ptr_ring cache */
if (page)
data[bulk_len++] = page;
}
if (unlikely(!bulk_len))
return;
/* Bulk producer into ptr_ring page_pool cache */
page_pool_ring_lock(pool);
for (i = 0; i < bulk_len; i++) {
if (__ptr_ring_produce(&pool->ring, data[i]))
break; /* ring full */
}
page_pool_ring_unlock(pool);
/* Hopefully all pages was return into ptr_ring */
if (likely(i == bulk_len))
return;
/* ptr_ring cache full, free remaining pages outside producer lock
* since put_page() with refcnt == 1 can be an expensive operation
*/
for (; i < bulk_len; i++)
page_pool_return_page(pool, data[i]);
}
EXPORT_SYMBOL(page_pool_put_page_bulk);
static struct page *page_pool_drain_frag(struct page_pool *pool,
struct page *page)
{
long drain_count = BIAS_MAX - pool->frag_users;
/* Some user is still using the page frag */
if (likely(page_pool_atomic_sub_frag_count_return(page,
drain_count)))
return NULL;
if (page_ref_count(page) == 1 && !page_is_pfmemalloc(page)) {
if (pool->p.flags & PP_FLAG_DMA_SYNC_DEV)
page_pool_dma_sync_for_device(pool, page, -1);
return page;
}
page_pool_return_page(pool, page);
return NULL;
}
static void page_pool_free_frag(struct page_pool *pool)
{
long drain_count = BIAS_MAX - pool->frag_users;
struct page *page = pool->frag_page;
pool->frag_page = NULL;
if (!page ||
page_pool_atomic_sub_frag_count_return(page, drain_count))
return;
page_pool_return_page(pool, page);
}
struct page *page_pool_alloc_frag(struct page_pool *pool,
unsigned int *offset,
unsigned int size, gfp_t gfp)
{
unsigned int max_size = PAGE_SIZE << pool->p.order;
struct page *page = pool->frag_page;
if (WARN_ON(!(pool->p.flags & PP_FLAG_PAGE_FRAG) ||
size > max_size))
return NULL;
size = ALIGN(size, dma_get_cache_alignment());
*offset = pool->frag_offset;
if (page && *offset + size > max_size) {
page = page_pool_drain_frag(pool, page);
if (page)
goto frag_reset;
}
if (!page) {
page = page_pool_alloc_pages(pool, gfp);
if (unlikely(!page)) {
pool->frag_page = NULL;
return NULL;
}
pool->frag_page = page;
frag_reset:
pool->frag_users = 1;
*offset = 0;
pool->frag_offset = size;
page_pool_set_frag_count(page, BIAS_MAX);
return page;
}
pool->frag_users++;
pool->frag_offset = *offset + size;
return page;
}
EXPORT_SYMBOL(page_pool_alloc_frag);
static void page_pool_empty_ring(struct page_pool *pool)
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
{
struct page *page;
/* Empty recycle ring */
net/page_pool: Fix inconsistent lock state warning Fix the warning below by calling the ptr_ring_consume_bh, which uses spin_[un]lock_bh. [ 179.064300] ================================ [ 179.069073] WARNING: inconsistent lock state [ 179.073846] 4.18.0-rc2+ #18 Not tainted [ 179.078133] -------------------------------- [ 179.082907] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 179.089637] swapper/21/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 179.095478] 00000000963d1995 (&(&r->consumer_lock)->rlock){+.?.}, at: __page_pool_empty_ring+0x61/0x100 [ 179.105988] {SOFTIRQ-ON-W} state was registered at: [ 179.111443] _raw_spin_lock+0x35/0x50 [ 179.115634] __page_pool_empty_ring+0x61/0x100 [ 179.120699] page_pool_destroy+0x32/0x50 [ 179.125204] mlx5e_free_rq+0x38/0xc0 [mlx5_core] [ 179.130471] mlx5e_close_channel+0x20/0x120 [mlx5_core] [ 179.136418] mlx5e_close_channels+0x26/0x40 [mlx5_core] [ 179.142364] mlx5e_close_locked+0x44/0x50 [mlx5_core] [ 179.148509] mlx5e_close+0x42/0x60 [mlx5_core] [ 179.153936] __dev_close_many+0xb1/0x120 [ 179.158749] dev_close_many+0xa2/0x170 [ 179.163364] rollback_registered_many+0x148/0x460 [ 179.169047] rollback_registered+0x56/0x90 [ 179.174043] unregister_netdevice_queue+0x7e/0x100 [ 179.179816] unregister_netdev+0x18/0x20 [ 179.184623] mlx5e_remove+0x2a/0x50 [mlx5_core] [ 179.190107] mlx5_remove_device+0xe5/0x110 [mlx5_core] [ 179.196274] mlx5_unregister_interface+0x39/0x90 [mlx5_core] [ 179.203028] cleanup+0x5/0xbfc [mlx5_core] [ 179.208031] __x64_sys_delete_module+0x16b/0x240 [ 179.213640] do_syscall_64+0x5a/0x210 [ 179.218151] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 179.224218] irq event stamp: 334398 [ 179.228438] hardirqs last enabled at (334398): [<ffffffffa511d8b7>] rcu_process_callbacks+0x1c7/0x790 [ 179.239178] hardirqs last disabled at (334397): [<ffffffffa511d872>] rcu_process_callbacks+0x182/0x790 [ 179.249931] softirqs last enabled at (334386): [<ffffffffa509732e>] irq_enter+0x5e/0x70 [ 179.259306] softirqs last disabled at (334387): [<ffffffffa509741c>] irq_exit+0xdc/0xf0 [ 179.268584] [ 179.268584] other info that might help us debug this: [ 179.276572] Possible unsafe locking scenario: [ 179.276572] [ 179.283877] CPU0 [ 179.286954] ---- [ 179.290033] lock(&(&r->consumer_lock)->rlock); [ 179.295546] <Interrupt> [ 179.298830] lock(&(&r->consumer_lock)->rlock); [ 179.304550] [ 179.304550] *** DEADLOCK *** Fixes: ff7d6b27f894 ("page_pool: refurbish version of page_pool code") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-17 23:10:37 +08:00
while ((page = ptr_ring_consume_bh(&pool->ring))) {
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
/* Verify the refcnt invariant of cached pages */
if (!(page_ref_count(page) == 1))
pr_crit("%s() page_pool refcnt %d violation\n",
__func__, page_ref_count(page));
page_pool_return_page(pool, page);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
}
}
static void page_pool_free(struct page_pool *pool)
{
if (pool->disconnect)
pool->disconnect(pool);
ptr_ring_cleanup(&pool->ring, NULL);
if (pool->p.flags & PP_FLAG_DMA_MAP)
put_device(pool->p.dev);
kfree(pool);
}
static void page_pool_scrub(struct page_pool *pool)
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
{
struct page *page;
/* Empty alloc cache, assume caller made sure this is
* no-longer in use, and page_pool_alloc_pages() cannot be
* call concurrently.
*/
while (pool->alloc.count) {
page = pool->alloc.cache[--pool->alloc.count];
page_pool_return_page(pool, page);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
}
/* No more consumers should exist, but producers could still
* be in-flight.
*/
page_pool_empty_ring(pool);
}
static int page_pool_release(struct page_pool *pool)
{
int inflight;
page_pool_scrub(pool);
inflight = page_pool_inflight(pool);
if (!inflight)
page_pool_free(pool);
return inflight;
}
static void page_pool_release_retry(struct work_struct *wq)
{
struct delayed_work *dwq = to_delayed_work(wq);
struct page_pool *pool = container_of(dwq, typeof(*pool), release_dw);
int inflight;
inflight = page_pool_release(pool);
if (!inflight)
return;
/* Periodic warning */
if (time_after_eq(jiffies, pool->defer_warn)) {
int sec = (s32)((u32)jiffies - (u32)pool->defer_start) / HZ;
pr_warn("%s() stalled pool shutdown %d inflight %d sec\n",
__func__, inflight, sec);
pool->defer_warn = jiffies + DEFER_WARN_INTERVAL;
}
/* Still not ready to be disconnected, retry later */
schedule_delayed_work(&pool->release_dw, DEFER_TIME);
}
void page_pool_use_xdp_mem(struct page_pool *pool, void (*disconnect)(void *))
{
refcount_inc(&pool->user_cnt);
pool->disconnect = disconnect;
}
void page_pool_destroy(struct page_pool *pool)
{
if (!pool)
return;
if (!page_pool_put(pool))
return;
page_pool_free_frag(pool);
if (!page_pool_release(pool))
return;
pool->defer_start = jiffies;
pool->defer_warn = jiffies + DEFER_WARN_INTERVAL;
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
INIT_DELAYED_WORK(&pool->release_dw, page_pool_release_retry);
schedule_delayed_work(&pool->release_dw, DEFER_TIME);
page_pool: refurbish version of page_pool code Need a fast page recycle mechanism for ndo_xdp_xmit API for returning pages on DMA-TX completion time, which have good cross CPU performance, given DMA-TX completion time can happen on a remote CPU. Refurbish my page_pool code, that was presented[1] at MM-summit 2016. Adapted page_pool code to not depend the page allocator and integration into struct page. The DMA mapping feature is kept, even-though it will not be activated/used in this patchset. [1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf V2: Adjustments requested by Tariq - Changed page_pool_create return codes, don't return NULL, only ERR_PTR, as this simplifies err handling in drivers. V4: many small improvements and cleanups - Add DOC comment section, that can be used by kernel-doc - Improve fallback mode, to work better with refcnt based recycling e.g. remove a WARN as pointed out by Tariq e.g. quicker fallback if ptr_ring is empty. V5: Fixed SPDX license as pointed out by Alexei V6: Adjustments requested by Eric Dumazet - Adjust ____cacheline_aligned_in_smp usage/placement - Move rcu_head in struct page_pool - Free pages quicker on destroy, minimize resources delayed an RCU period - Remove code for forward/backward compat ABI interface V8: Issues found by kbuild test robot - Address sparse should be static warnings - Only compile+link when a driver use/select page_pool, mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 22:46:17 +08:00
}
EXPORT_SYMBOL(page_pool_destroy);
/* Caller must provide appropriate safe context, e.g. NAPI. */
void page_pool_update_nid(struct page_pool *pool, int new_nid)
{
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
struct page *page;
trace_page_pool_update_nid(pool, new_nid);
pool->p.nid = new_nid;
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
/* Flush pool alloc cache, as refill will check NUMA node */
while (pool->alloc.count) {
page = pool->alloc.cache[--pool->alloc.count];
page_pool_return_page(pool, page);
page_pool: handle page recycle for NUMA_NO_NODE condition The check in pool_page_reusable (page_to_nid(page) == pool->p.nid) is not valid if page_pool was configured with pool->p.nid = NUMA_NO_NODE. The goal of the NUMA changes in commit d5394610b1ba ("page_pool: Don't recycle non-reusable pages"), were to have RX-pages that belongs to the same NUMA node as the CPU processing RX-packet during softirq/NAPI. As illustrated by the performance measurements. This patch moves the NAPI checks out of fast-path, and at the same time solves the NUMA_NO_NODE issue. First realize that alloc_pages_node() with pool->p.nid = NUMA_NO_NODE will lookup current CPU nid (Numa ID) via numa_mem_id(), which is used as the the preferred nid. It is only in rare situations, where e.g. NUMA zone runs dry, that page gets doesn't get allocated from preferred nid. The page_pool API allows drivers to control the nid themselves via controlling pool->p.nid. This patch moves the NAPI check to when alloc cache is refilled, via dequeuing/consuming pages from the ptr_ring. Thus, we can allow placing pages from remote NUMA into the ptr_ring, as the dequeue/consume step will check the NUMA node. All current drivers using page_pool will alloc/refill RX-ring from same CPU running softirq/NAPI process. Drivers that control the nid explicitly, also use page_pool_update_nid when changing nid runtime. To speed up transision to new nid the alloc cache is now flushed on nid changes. This force pages to come from ptr_ring, which does the appropate nid check. For the NUMA_NO_NODE case, when a NIC IRQ is moved to another NUMA node, we accept that transitioning the alloc cache doesn't happen immediately. The preferred nid change runtime via consulting numa_mem_id() based on the CPU processing RX-packets. Notice, to avoid stressing the page buddy allocator and avoid doing too much work under softirq with preempt disabled, the NUMA check at ptr_ring dequeue will break the refill cycle, when detecting a NUMA mismatch. This will cause a slower transition, but its done on purpose. Fixes: d5394610b1ba ("page_pool: Don't recycle non-reusable pages") Reported-by: Li RongQing <lirongqing@baidu.com> Reported-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2019-12-28 01:13:18 +08:00
}
}
EXPORT_SYMBOL(page_pool_update_nid);
page_pool: Allow drivers to hint on SKB recycling Up to now several high speed NICs have custom mechanisms of recycling the allocated memory they use for their payloads. Our page_pool API already has recycling capabilities that are always used when we are running in 'XDP mode'. So let's tweak the API and the kernel network stack slightly and allow the recycling to happen even during the standard operation. The API doesn't take into account 'split page' policies used by those drivers currently, but can be extended once we have users for that. The idea is to be able to intercept the packet on skb_release_data(). If it's a buffer coming from our page_pool API recycle it back to the pool for further usage or just release the packet entirely. To achieve that we introduce a bit in struct sk_buff (pp_recycle:1) and a field in struct page (page->pp) to store the page_pool pointer. Storing the information in page->pp allows us to recycle both SKBs and their fragments. We could have skipped the skb bit entirely, since identical information can bederived from struct page. However, in an effort to affect the free path as less as possible, reading a single bit in the skb which is already in cache, is better that trying to derive identical information for the page stored data. The driver or page_pool has to take care of the sync operations on it's own during the buffer recycling since the buffer is, after opting-in to the recycling, never unmapped. Since the gain on the drivers depends on the architecture, we are not enabling recycling by default if the page_pool API is used on a driver. In order to enable recycling the driver must call skb_mark_for_recycle() to store the information we need for recycling in page->pp and enabling the recycling bit, or page_pool_store_mem_info() for a fragment. Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Co-developed-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com> Conflicts: include/linux/skbuff.h
2021-06-08 03:02:38 +08:00
bool page_pool_return_skb_page(struct page *page)
{
struct page_pool *pp;
page = compound_head(page);
page_pool: mask the page->signature before the checking As mentioned in commit c07aea3ef4d4 ("mm: add a signature in struct page"): "The page->signature field is aliased to page->lru.next and page->compound_head." And as the comment in page_is_pfmemalloc(): "lru.next has bit 1 set if the page is allocated from the pfmemalloc reserves. Callers may simply overwrite it if they do not need to preserve that information." The page->signature is OR’ed with PP_SIGNATURE when a page is allocated in page pool, see __page_pool_alloc_pages_slow(), and page->signature is checked directly with PP_SIGNATURE in page_pool_return_skb_page(), which might cause resoure leaking problem for a page from page pool if bit 1 of lru.next is set for a pfmemalloc page. What happens here is that the original pp->signature is OR'ed with PP_SIGNATURE after the allocation in order to preserve any existing bits(such as the bit 1, used to indicate a pfmemalloc page), so when those bits are present, those page is not considered to be from page pool and the DMA mapping of those pages will be left stale. As bit 0 is for page->compound_head, So mask both bit 0/1 before the checking in page_pool_return_skb_page(). And we will return those pfmemalloc pages back to the page allocator after cleaning up the DMA mapping. Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling") Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
2021-08-06 09:39:07 +08:00
/* page->pp_magic is OR'ed with PP_SIGNATURE after the allocation
* in order to preserve any existing bits, such as bit 0 for the
* head page of compound page and bit 1 for pfmemalloc page, so
* mask those bits for freeing side when doing below checking,
* and page_is_pfmemalloc() is checked in __page_pool_put_page()
* to avoid recycling the pfmemalloc page.
*/
if (unlikely((page->pp_magic & ~0x3UL) != PP_SIGNATURE))
page_pool: Allow drivers to hint on SKB recycling Up to now several high speed NICs have custom mechanisms of recycling the allocated memory they use for their payloads. Our page_pool API already has recycling capabilities that are always used when we are running in 'XDP mode'. So let's tweak the API and the kernel network stack slightly and allow the recycling to happen even during the standard operation. The API doesn't take into account 'split page' policies used by those drivers currently, but can be extended once we have users for that. The idea is to be able to intercept the packet on skb_release_data(). If it's a buffer coming from our page_pool API recycle it back to the pool for further usage or just release the packet entirely. To achieve that we introduce a bit in struct sk_buff (pp_recycle:1) and a field in struct page (page->pp) to store the page_pool pointer. Storing the information in page->pp allows us to recycle both SKBs and their fragments. We could have skipped the skb bit entirely, since identical information can bederived from struct page. However, in an effort to affect the free path as less as possible, reading a single bit in the skb which is already in cache, is better that trying to derive identical information for the page stored data. The driver or page_pool has to take care of the sync operations on it's own during the buffer recycling since the buffer is, after opting-in to the recycling, never unmapped. Since the gain on the drivers depends on the architecture, we are not enabling recycling by default if the page_pool API is used on a driver. In order to enable recycling the driver must call skb_mark_for_recycle() to store the information we need for recycling in page->pp and enabling the recycling bit, or page_pool_store_mem_info() for a fragment. Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Co-developed-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: hongrongxuan <hongrongxuan@huawei.com> Conflicts: include/linux/skbuff.h
2021-06-08 03:02:38 +08:00
return false;
pp = page->pp;
/* Driver set this to memory recycling info. Reset it on recycle.
* This will *not* work for NIC using a split-page memory model.
* The page will be returned to the pool here regardless of the
* 'flipped' fragment being in use or not.
*/
page_pool_put_full_page(pp, page, false);
return true;
}
EXPORT_SYMBOL(page_pool_return_skb_page);