UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/scsi/Makefile

204 lines
7.6 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
# SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Makefile for linux/drivers/scsi
#
# 30 May 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
# 20 Sep 2000, Torben Mathiasen <tmm@image.dk>
# Changed link order to reflect new scsi initialization.
#
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
# The link order must be, SCSI Core, SCSI HBA drivers, and
# lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to
# satisfy certain initialization assumptions in the SCSI layer.
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
[SCSI] make pcmcia directory use obj-y|m instead of subdir-y|m subdir-y|m isn't supposed to contain modules or built-in components. Change subdir-$(CONFIG_PCMCIA) to obj-$(CONFIG_PCMCIA). Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-07 21:36:23 +08:00
obj-$(CONFIG_PCMCIA) += pcmcia/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI) += scsi_mod.o
scsi: build scsi_common.o for all scsi passthrough request users Split scsi_common.o out of SCSI so that non-SCSI users can pull it in easily for future sense buffer helper usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-01 03:51:48 +08:00
obj-$(CONFIG_BLK_SCSI_REQUEST) += scsi_common.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SCSI] embryonic RAID class The idea behind a RAID class is to provide a uniform interface to all RAID subsystems (both hardware and software) in the kernel. To do that, I've made this class a transport class that's entirely subsystem independent (although the matching routines have to match per subsystem, as you'll see looking at the code). I put it in the scsi subdirectory purely because I needed somewhere to play with it, but it's not a scsi specific module. I used a fusion raid card as the test bed for this; with that kind of card, this is the type of class output you get: jejb@titanic> ls -l /sys/class/raid_devices/20\:0\:0\:0/ total 0 lrwxrwxrwx 1 root root 0 Aug 16 17:21 component-0 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:0/20:1:0:0/ lrwxrwxrwx 1 root root 0 Aug 16 17:21 component-1 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:1/20:1:1:0/ lrwxrwxrwx 1 root root 0 Aug 16 17:21 device -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:0:0/20:0:0:0/ -r--r--r-- 1 root root 16384 Aug 16 17:21 level -r--r--r-- 1 root root 16384 Aug 16 17:21 resync -r--r--r-- 1 root root 16384 Aug 16 17:21 state So it's really simple: for a SCSI device representing a hardware raid, it shows the raid level, the array state, the resync % complete (if the state is resyncing) and the underlying components of the RAID (these are exposed in fusion on the virtual channel 1). As you can see, this type of information can be exported by almost anything, including software raid. The more difficult trick, of course, is going to be getting it to perform configuration type actions with writable attributes. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-17 07:27:34 +08:00
obj-$(CONFIG_RAID_ATTRS) += raid_class.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# --- NOTE ORDERING HERE ---
# For kernel non-modular link, transport attributes need to
# be initialised before drivers
# --------------------------
obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
[SCSI] SAS transport class The SAS transport class contains common code to deal with SAS HBAs, an aproximated representation of SAS topologies in the driver model, and various sysfs attributes to expose these topologies and managment interfaces to userspace. In addition to the basic SCSI core objects this transport class introduces two additional intermediate objects: The SAS PHY as represented by struct sas_phy defines an "outgoing" PHY on a SAS HBA or Expander, and the SAS remote PHY represented by struct sas_rphy defines an "incoming" PHY on a SAS Expander or end device. Note that this is purely a software concept, the underlying hardware for a PHY and a remote PHY is the exactly the same. There is no concept of a SAS port in this code, users can see what PHYs form a wide port based on the port_identifier attribute, which is the same for all PHYs in a port. This submission doesn't handle hot-plug addition or removal of SAS devices and thus doesn't do scanning in a workqueue yet, that will be added in phase2 after this submission. In a third phase I will add additional managment infrastructure. I think this submission is ready for 2.6.14, but additional comments are of course very welcome. I'd like to thanks James Smart a lot for his very useful input on the design. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-09 22:22:50 +08:00
obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
[SCSI] add srp transport class This adds srp transport class that works with ib_srp and ibmvscsi. It creates only /sys/class/{srp_host,srp_remote_ports} and srp_remote_ports has only "port_id" attribute. viola:/sys/class/srp_remote_ports/port-0:1# ls device port_id subsystem uevent viola:/sys/class/srp_remote_ports/port-0:1# cat port_id 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-27 15:32:39 +08:00
obj-$(CONFIG_SCSI_SRP_ATTRS) += scsi_transport_srp.o
[SCSI] scsi_dh: add infrastructure for SCSI Device Handlers Some of the storage devices (that can be accessed through multiple paths), do need some special handling for 1. Activating the passive path of the storage access. 2. Decode and handle the special sense codes returned by the devices. 3. Handle the I/Os being sent to the passive path, especially during the device probe time. when accessed through multiple paths. As of today this special device handling is done at the dm-multipath layer using dm-handlers. That works well for (1); for (2) to be handled at dm layer, scsi sense information need to be exported from SCSI to dm-layer, which is not very attractive; (3) cannot be done at all at the dm layer. Device handler has been moved to SCSI mainly to handle (2) and (3) properly. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-02 05:49:46 +08:00
obj-$(CONFIG_SCSI_DH) += device_handler/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SCSI] libfc: A modular Fibre Channel library libFC is composed of 4 blocks supported by an exchange manager and a framing library. The upper 4 layers are fc_lport, fc_disc, fc_rport and fc_fcp. A LLD that uses libfc could choose to either use libfc's block, or using the transport template defined in libfc.h, override one or more blocks with its own implementation. The EM (Exchange Manager) manages exhcanges/sequences for all commands- ELS, CT and FCP. The framing library frames ELS and CT commands. The fc_lport block manages the library's representation of the host's FC enabled ports. The fc_disc block manages discovery of targets as well as handling changes that occur in the FC fabric (via. RSCN events). The fc_rport block manages the library's representation of other entities in the FC fabric. Currently the library uses this block for targets, its peer when in point-to-point mode and the directory server, but can be extended for other entities if needed. The fc_fcp block interacts with the scsi-ml and handles all I/O. Signed-off-by: Robert Love <robert.w.love@intel.com> [jejb: added include of delay.h to fix ppc64 compile prob spotted by sfr] Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-10 07:10:17 +08:00
obj-$(CONFIG_LIBFC) += libfc/
[SCSI] fcoe, libfc: add libfcoe module Just sets up build environment for libfcoe module towards a libfcoe library for libfc LLDs using FCoE as libfc transport. Common library code to libfcoe is added in next patch. Also, updated MODULE_LICENSE from "GPL" string to "GPL v2" for libfc, libfcoe and fcoe modules to accurately match the licenses. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-18 02:42:13 +08:00
obj-$(CONFIG_LIBFCOE) += fcoe/
[SCSI] fcoe: Fibre Channel over Ethernet Encapsulation protocol for running Fibre Channel over Ethernet interfaces. Creates virtual Fibre Channel host adapters using libfc. This layer is the LLD to the scsi-ml. It allocates the Scsi_Host, utilizes libfc for Fibre Channel protocol processing and interacts with netdev to send/receive Ethernet packets. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-10 07:10:24 +08:00
obj-$(CONFIG_FCOE) += fcoe/
[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA fnic is a driver for the Cisco PCI-Express FCoE HBA Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-18 09:33:26 +08:00
obj-$(CONFIG_FCOE_FNIC) += fnic/
snic: driver for Cisco SCSI HBA Cisco has developed a new PCI HBA interface called sNIC, which stands for SCSI NIC. This is a new storage feature supported on specialized network adapter. The new PCI function provides a uniform host interface and abstracts backend storage. [jejb: fix up checkpatch errors] Signed-off-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-29 16:04:01 +08:00
obj-$(CONFIG_SCSI_SNIC) += snic/
[SCSI] bnx2fc: Broadcom FCoE offload driver This driver is for Broadcom Netxtreme II 57712 chip. The following patch contains the driver sources for bnx2fc driver. libfc/libfcoe changes to enable bnx2fc have already gone through the fcoe tree. bnx2fc is a SCSI low level driver that interfaces with SCSI midlayer, libfc, libfcoe, cnic modules. bnx2fc driver uses services of libfc for slow path operations such as FIP and fabric discovery. The fast path IO perations are performed after offloading the session information to the underlying FCoE firmware. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-05 04:10:34 +08:00
obj-$(CONFIG_SCSI_BNX2X_FCOE) += libfc/ fcoe/ bnx2fc/
scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework. The QLogic FastLinQ Driver for FCoE (qedf) is the FCoE specific module for 41000 Series Converged Network Adapters by QLogic. This patch consists of following changes: - MAINTAINERS Makefile and Kconfig changes for qedf - PCI driver registration - libfc/fcoe host level initialization - SCSI host template initialization and callbacks - Debugfs and log level infrastructure - Link handling - Firmware interface structures - QED core module initialization - Light L2 interface callbacks - I/O request initialization - Firmware I/O completion handling - Firmware ELS request/response handling - FIP request/response handled by the driver itself Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-15 22:28:23 +08:00
obj-$(CONFIG_QEDF) += qedf/
[SCSI] iscsi_tcp: hook iscsi_tcp into new libiscsi_tcp module This hooks iscsi_tcp into the libiscsi_tcp module and removes code that is now in libiscsi_tcp. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-02 14:32:12 +08:00
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
IB/iser: iSER Kconfig and Makefile Kconfig and Makefile for iSER. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-11 15:03:30 +08:00
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
[SCSI] iscsi boot: mv iscsi_boot_sysfs to drivers/scsi iscsi_boot_sysfs does not depend on firmware. Any iscsi driver can use it. This patch moves iscsi_boot_sysfs to the scsi dir, so that it can be used on any arch with any driver. Signed-off-by: Mike Christie <mchristi@redhat.com> Acked-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-03 01:46:12 +08:00
obj-$(CONFIG_ISCSI_BOOT_SYSFS) += iscsi_boot_sysfs.o
[SCSI] 53c700: Amiga 4000T NCR53c710 SCSI New driver for the Amiga 4000T built-in NCR53c710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 20:47:08 +08:00
obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o
[SCSI] 53c700: Amiga Zorro NCR53c710 SCSI New driver for Amiga Zorro bus NCR53c710 SCSI controllers, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 20:47:09 +08:00
obj-$(CONFIG_SCSI_ZORRO7XX) += 53c700.o zorro7xx.o
scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards New combined SCSI driver for all ESP based Zorro SCSI boards for m68k Amiga. Code largely based on board specific parts of the old drivers (blz1230.c, blz2060.c, cyberstorm.c, cyberstormII.c, fastlane.c which were removed after the 2.6 kernel series for lack of maintenance) with contributions by Tuomas Vainikka (TCQ bug tests and workaround) and Finn Thain (TCQ bugfix by use of PIO in extended message in transfer). New Kconfig option and Makefile entries for new Amiga Zorro ESP SCSI driver included in this patch. Use DMA transfers wherever possible, with board-specific DMA set-up functions copied from the old driver code. Three byte reselection messages do appear to cause DMA timeouts. So wire up a PIO transfer routine for these instead. esp_reselect_with_tag explicitly sets esp->cmd_block_dma as target address for the message bytes but PIO requires a virtual address. Substiute kernel virtual address esp->cmd_block in PIO transfer call if DMA address is esp->cmd_block_dma and phase is message in. PIO code taken from mac_esp.c where the reselection timeout issue was debugged and fixed first, with minor macro and function rename. Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian T. Steigies <cts@debian.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-12 09:53:26 +08:00
obj-$(CONFIG_SCSI_ZORRO_ESP) += esp_scsi.o zorro_esp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
[SCSI] m68k: new mac_esp scsi driver Replace the mac_esp driver with a new one based on the esp_scsi core. For esp_scsi: add support for sync transfers for the PIO mode, add a new esp_driver_ops method to get the maximum dma transfer size (like the old NCR53C9x driver), and some cleanups. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-25 23:06:05 +08:00
obj-$(CONFIG_SCSI_MAC_ESP) += esp_scsi.o mac_esp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
[SCSI] 53c700: m68k MVME16x NCR53C710 SCSI New driver for the MVME16x NCR53C710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 20:47:07 +08:00
obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o
[SCSI] 53c700: m68k BVME6000 NCR53C710 SCSI New driver for the BVME6000 NCR53C710 SCSI controller, using the 53c700 SCSI core. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 20:47:06 +08:00
obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o
obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o
obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
[SCSI] arcmsr: initial driver, version 1.20.00.13 arcmsr is a driver for the Areca Raid controller, a host based RAID subsystem that speaks SCSI at the firmware level. This patch is quite a clean up over the initial submission with contributions from: Randy Dunlap <rdunlap@xenotime.net> Christoph Hellwig <hch@lst.de> Matthew Wilcox <matthew@wil.cx> Adrian Bunk <bunk@stusta.de> Signed-off-by: Erich Chen <erich@areca.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12 23:59:32 +08:00
obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
[SCSI] pm8001: add SAS/SATA HBA driver This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based host adapters. Signed-off-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: Tom Peng <tom_peng@usish.com> Signed-off-by: Kevin Ao <aoqingyun@usish.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-14 16:19:21 +08:00
obj-$(CONFIG_SCSI_PM8001) += pm8001/
isci: Intel(R) C600 Series Chipset Storage Control Unit Driver Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the chipset. This is a snapshot of the first publicly available version of the driver, commit 4c1db2d0 in the 'historical' branch. git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 13:56:22 +08:00
obj-$(CONFIG_SCSI_ISCI) += isci/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
[SCSI] qla2xxx: Kconfig: two fixes Original From: Adrian Bunk Here's a composite patch with Adrian's original additions and help-text with the new Kconfig variable SCSI_QLA_FC. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-10 02:17:40 +08:00
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
[SCSI] scsi: qla4xxx needs libiscsi.o qla4xxx driver needs to be linked with libiscsi.o to fix build errors. This happens when no other drivers that use libiscsi.o are enabled. ERROR: "iscsi_conn_stop" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_get_addr_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_teardown" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_host_alloc" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_start" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_send_pdu" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_get_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_get_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_set_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_failure" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_complete_pdu" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_setup" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_bind" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_setup" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_itt_to_task" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-09-01 06:02:00 +08:00
obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/
lpfc: add Emulex FC driver version 8.0.28 From: James.Smart@Emulex.Com Modified for kernel import and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 05:05:31 +08:00
obj-$(CONFIG_SCSI_LPFC) += lpfc/
[SCSI] bfa: Brocade BFA FC SCSI driver Add new driver for Brocade Hardware Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-24 08:46:15 +08:00
obj-$(CONFIG_SCSI_BFA_FC) += bfa/
[SCSI] csiostor: Chelsio FCoE offload driver Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-16 01:11:18 +08:00
obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
[SCSI] hpsa: add driver for HP Smart Array controllers. This driver supports a subset of HP Smart Array Controllers. It is a SCSI alternative to the cciss driver. [akpm@linux-foundation.org: avoid helpful cleanup patches] [achiang@hp.com: make device attrs static] [akpm@linux-foundation.org: msleep() does set_current_state() itself] Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-09 06:09:11 +08:00
obj-$(CONFIG_SCSI_HPSA) += hpsa.o
smartpqi: initial commit of Microsemi smartpqi driver This initial commit contains Microsemi's smartpqi module. [mkp: Minor tweaks to apply to 4.9/scsi-queue] Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-06-28 05:41:00 +08:00
obj-$(CONFIG_SCSI_SMARTPQI) += smartpqi/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
am53c974: add new driver This patch adds a new implementation for the Tekram DC-390T / AMD AM53c974 SCSI controller, based on the generic esp_scsi infrastructure. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 22:37:25 +08:00
obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o
cxlflash: Base support for IBM CXL Flash Adapter SCSI device driver to support filesystem access on the IBM CXL Flash adapter. Supported-by: Stephen Bates <stephen.bates@pmcs.com> Reviewed-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-10 06:15:52 +08:00
obj-$(CONFIG_CXLFLASH) += cxlflash/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
[SCSI] MegaRAID SAS RAID: new driver Signed-off-by: Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-21 05:46:58 +08:00
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
[SCSI] mpt3sas: add new driver supporting 12GB SAS These driver files are initially, substantially similar to mpt2sas but, because mpt2sas is going into maintenance mode and mp3sas will become heavily developed, we elected to keep the code bases separate. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-30 10:14:21 +08:00
obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
[SCSI] ufshcd: UFS Host controller driver This patch adds support for Universal Flash Storage(UFS) host controllers. The UFS host controller driver includes host controller initialization method. The Initialization process involves following steps: - Initiate UFS Host Controller initialization process by writing to Host controller enable register - Configure UFS Host controller registers with host memory space datastructure offsets. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests - Enable required interrupts - Configure interrupt aggregation [jejb: fix warnings in 32 bit compile] Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Reviewed-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Vishak G <vishak.g@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 14:41:50 +08:00
obj-$(CONFIG_SCSI_UFSHCD) += ufs/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
[SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-23 14:48:10 +08:00
obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_GDTH) += gdth.o
obj-$(CONFIG_SCSI_INITIO) += initio.o
obj-$(CONFIG_SCSI_INIA100) += a100u2w.o
obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
obj-$(CONFIG_SCSI_MESH) += mesh.o
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
scsi: myrb: Add Mylex RAID controller (block interface) This patch adds support for the Mylex DAC960 RAID controller, supporting the older, block-based interface only. The driver is a re-implementation of the original DAC960 driver. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 23:25:11 +08:00
obj-$(CONFIG_SCSI_MYRB) += myrb.o
scsi: myrs: Add Mylex RAID controller (SCSI interface) This patch adds support for the Mylex DAC960 RAID controller, supporting the newer, SCSI-based interface. The driver is a re-implementation of the original DAC960 driver. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 23:25:12 +08:00
obj-$(CONFIG_SCSI_MYRS) += myrs.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
[SCSI] 3w-sas: Add new driver for LSI 3ware 9750 [jejb: fix up for new queue depth code] Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-24 05:52:33 +08:00
obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_PPA) += ppa.o
obj-$(CONFIG_SCSI_IMM) += imm.o
[SCSI] jazz_esp: converted to use esp_core Use new esp_scsi for JAZZ SCSI host adapter driver Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22 16:13:19 +08:00
obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o
[SCSI] sun3x_esp: convert to esp_scsi Converted sun3x_esp driver to use esp_scsi.c Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-01 07:13:34 +08:00
obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
[SCSI] SNI RM 53c710 driver This patch adds a SCSI driver for the onboard 53c710 chip of some SNI RM machines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-26 04:32:04 +08:00
obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
obj-$(CONFIG_SCSI_IPR) += ipr.o
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
ibmvscsis: Initial commit of IBM VSCSI Tgt Driver This driver is a pick up of the old IBM VIO scsi Target Driver that was started by Nick and Fujita 2-4 years ago. http://comments.gmane.org/gmane.linux.scsi/90119 The driver provides a virtual SCSI device on IBM Power Servers. This patch contains the fifth version for an initial merge of the tcm ibmvscsis driver. More information on this driver and config can be found: https://github.com/powervm/ibmvscsis/wiki/Configuration http://www.linux-iscsi.org/wiki/IBM_vSCSI (Drop extra libsrp review breakage + Fix kconfig typo - nab) Signed-off-by: Steven Royer <seroyer@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Cyr <mikecyr@linux.vnet.ibm.com> Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: FUJITA Tomonori <tomof@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-06-29 06:05:35 +08:00
obj-$(CONFIG_SCSI_IBMVSCSIS) += ibmvscsi_tgt/
[SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver This patch adds a new device driver to support the Virtual Fibre Channel interface on IBM Power based servers. The Virtual I/O Server on IBM Power servers utilizes N-Port ID Virtualization to export a Virtual Fibre Channel adapter to the client. This driver is the client device driver. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-02 02:14:30 +08:00
obj-$(CONFIG_SCSI_IBMVFC) += ibmvscsi/
[SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver HighPoint RocketRAID 3220/3320 series 8 channel PCI-X SATA RAID Host Adapters. Fixes from original submission: Merge Andrew Morton's patches: - Provide locking for global list - Fix debug printks - uninline function with multiple callsites - coding style fixups - remove unneeded casts of void* - kfree(NULL) is legal - Don't "succeed" if register_chrdev() failed - otherwise we'll later unregister a not-registered chrdev. - Don't return from hptiop_do_ioctl() with the spinlock held. - uninline __hpt_do_ioctl() Update for Arjan van de Ven's comments: - put all asm/ includes after the linux/ ones - replace mdelay with msleep - add pci posting flush - do not set pci command reqister in map_pci_bar - do not try merging sg elements in hptiop_buildsgl() - remove unused outstandingcommands member from hba structure - remove unimplemented hptiop_abort() handler - remove typedef u32 hpt_id_t Other updates: - fix endianess Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-16 14:38:09 +08:00
obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
[SCSI] Add Promise SuperTrak driver Add Promise SuperTrak 'stex' driver, supporting SuperTrak EX8350/8300/16350/16300 controllers. The controller's firmware accepts SCSI commands, handing them to the underlying RAID or JBOD disks. The driver consisted of the following cleanups and fixes, beyond its initial submission: Ed Lin: stex: cleanup and minor fixes stex: add new device ids stex: update internal copy code path stex: add hard reset function stex: adjust command timeout in slave_config routine stex: use more efficient method for unload/shutdown flush Jeff Garzik: [SCSI] Add Promise SuperTrak 'shasta' driver. Rename drivers/scsi/shasta.c to stex.c ("SuperTrak EX"). [SCSI] stex: update with community comments from 'Promise SuperTrak' thread [SCSI] stex: Fix warning, trim trailing whitespace. [SCSI] stex: remove last remnants of "shasta" project code name [SCSI] stex: removed 6-byte command emulation [SCSI] stex: minor cleanups [SCSI] stex: minor fixes: irq flag, error return value [SCSI] stex: use dma_alloc_coherent() Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-01 15:12:19 +08:00
obj-$(CONFIG_SCSI_STEX) += stex.o
[SCSI] mvsas: move into new directory drivers/scsi/mvsas/ Zero functional changes, just file movement. This commit prepares for the upcoming integration of the Marvell-provided driver update that splits the driver into support for both 64xx and 94xx chip families. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-09 04:35:37 +08:00
obj-$(CONFIG_SCSI_MVSAS) += mvsas/
[SCSI] mvumi: Add Marvell UMI driver The Marvell Universal Message Interface (UMI) defines a messaging interface between host and Marvell products (Plato, for example). It considers situations of limited system resource and optimized system performance. UMI driver translates host request to message and sends message to FW via UMI, FW receives message and processes it, then sends response to UMI driver. FW generates an interrupt when it needs to send information or response to UMI driver Signed-off-by: Jianyun Li <jyli@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-11 23:22:44 +08:00
obj-$(CONFIG_SCSI_MVUMI) += mvumi.o
ps3: BD/DVD/CD-ROM Storage Driver Add a BD/DVD/CD-ROM Storage Driver for the PS3: - Implemented as a SCSI device driver - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor doesn't support scatter-gather Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 19:37:47 +08:00
obj-$(CONFIG_PS3_ROM) += ps3rom.o
[SCSI] cxgb3i: change cxgb3i to use libcxgbi Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-17 11:55:53 +08:00
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/
[SCSI] cxgb4i v5: iscsi driver Added cxgb4i iSCSI driver. This patch implements the cxgb4i iscsi connection acceleration for the open-iscsi initiator. The cxgb4i driver offers the iscsi PDU based offload: - digest insertion and verification - payload direct-placement into host memory buffer. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-17 11:55:53 +08:00
obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/
[SCSI] bnx2i: Add bnx2i iSCSI driver. New iSCSI driver for Broadcom BNX2 devices. The driver interfaces with the CNIC driver to access the hardware. Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09 09:14:44 +08:00
obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/
scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework. The QLogic FastLinQ Driver for iSCSI (qedi) is the iSCSI specific module for 41000 Series Converged Network Adapters by QLogic. This patch consists of following changes: - MAINTAINERS Makefile and Kconfig changes for qedi, - PCI driver registration, - iSCSI host level initialization, - Debugfs and log level infrastructure. The following indiviual changes are merged into this commit: qedi: Add LL2 iSCSI interface for offload iSCSI. qedi: Add support for iSCSI session management. qedi: Add support for data path. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-01 16:21:08 +08:00
obj-$(CONFIG_QEDI) += libiscsi.o qedi/
[SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver [v2: fixed up virt_to_bus() issue spotted by sfr] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 10:06:35 +08:00
obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/
[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver This is a new driver for ATTO Technology's ExpressSAS series of hardware RAID adapters. It supports the following adapters: - ExpressSAS R60F - ExpressSAS R680 - ExpressSAS R608 - ExpressSAS R644 Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23 22:35:45 +08:00
obj-$(CONFIG_SCSI_ESAS2R) += esas2r/
[SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller Signed-off-by: Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-26 08:35:18 +08:00
obj-$(CONFIG_SCSI_PMCRAID) += pmcraid.o
[SCSI] virtio-scsi: SCSI driver for QEMU based virtual machines The virtio-scsi HBA is the basis of an alternative storage stack for QEMU-based virtual machines (including KVM). Compared to virtio-blk it is more scalable, because it supports many LUNs on a single PCI slot), more powerful (it more easily supports passthrough of host devices to the guest) and more easily extensible (new SCSI features implemented by QEMU should not require updating the driver in the guest). Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-05 19:16:00 +08:00
obj-$(CONFIG_SCSI_VIRTIO) += virtio_scsi.o
[SCSI] vmw_pvscsi: SCSI driver for VMware's virtual HBA. This is a driver for VMware's paravirtualized SCSI device, which should improve disk performance for guests running under control of VMware hypervisors that support such devices. Signed-off-by: Alok N Kataria <akataria@vmware.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-14 05:51:05 +08:00
obj-$(CONFIG_VMWARE_PVSCSI) += vmw_pvscsi.o
xen-scsifront: Add Xen PV SCSI frontend driver Introduces the Xen pvSCSI frontend. With pvSCSI it is possible for a Xen domU to issue SCSI commands to a SCSI LUN assigned to that domU. The SCSI commands are passed to the pvSCSI backend in a driver domain (usually Dom0) which is owner of the physical device. This allows e.g. to use SCSI tape drives in a Xen domU. The code is taken from the pvSCSI implementation in Xen done by Fujitsu based on Linux kernel 2.6.18. Changes from the original version are: - port to upstream kernel - put all code in just one source file - move module to appropriate location in kernel tree - adapt to Linux style guide - some minor code simplifications - replace constants with defines - remove not used defines - add support for larger SG lists by putting them in a granted page Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-08-28 12:44:11 +08:00
obj-$(CONFIG_XEN_SCSI_FRONTEND) += xen-scsifront.o
Staging: hv: storvsc: Move the storage driver out of the staging area The storage driver (storvsc_drv.c) handles all block storage devices assigned to Linux guests hosted on Hyper-V. This driver has been in the staging tree for a while and this patch moves it out of the staging area. James was willing to apply this patch during the 3.3-rc phase and a decision was taken to defer this to 3.4 since Greg had queued up a bunch of storvsc patches for 3.4. Now that Greg has applied all of the pending storvsc patches, I am sending this patch to move this driver out of staging. Based on James' recommendation, this patch gets rid of the unneeded files in the staging/hv directory. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 06:14:48 +08:00
obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o
wd719x: Introduce Western Digital WD7193/7197/7296 PCI SCSI card driver Introduce wd719x, a driver for Western Digital WD7193, WD7197 and WD7296 PCI SCSI controllers based on WD33C296A chip. Tested with WD7193 card. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-25 06:24:41 +08:00
obj-$(CONFIG_SCSI_WD719X) += wd719x.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_CHR_DEV_ST) += st.o
obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o
obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
obj-$(CONFIG_CHR_DEV_SG) += sg.o
[SCSI] add scsi changer driver This patch adds a device driver for scsi media changer devices. Signed-off-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-10 16:59:13 +08:00
obj-$(CONFIG_CHR_DEV_SCH) += ch.o
[SCSI] ses: add new Enclosure ULD This adds support to SCSI for enclosure services devices. It also makes use of the enclosure services added in an earlier patch to display the enclosure topology in sysfs. At the moment, the enclosures are SAS specific, but if anyone actually has a non-SAS enclosure that follows the SES-2 standard, we can add that as well. On my Vitesse based system, the enclosures show up like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/ total 0 -r--r--r-- 1 root root 4096 2008-02-03 15:44 components lrwxrwxrwx 1 root root 0 2008-02-03 15:44 device -> ../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:12/end_device-0:0:12/target0:0:1/0:0:1:0 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 000 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 001 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 002 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 003 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 004 drwxr-xr-x 2 root root 0 2008-02-03 15:44 SLOT 005 lrwxrwxrwx 1 root root 0 2008-02-03 15:44 subsystem -> ../../enclosure --w------- 1 root root 4096 2008-02-03 15:44 uevent And the individual occupied slots like this: sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/SLOT\ 001/ total 0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 active lrwxrwxrwx 1 root root 0 2008-02-03 15:45 device -> ../../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:11/end_device-0:0:11/target0:0:0/0:0:0:0 -rw-r--r-- 1 root root 4096 2008-02-03 15:45 fault -rw-r--r-- 1 root root 4096 2008-02-03 15:45 locate -rw-r--r-- 1 root root 4096 2008-02-03 15:45 status lrwxrwxrwx 1 root root 0 2008-02-03 15:45 subsystem -> ../../../enclosure_component -r--r--r-- 1 root root 4096 2008-02-03 15:45 type --w------- 1 root root 4096 2008-02-03 15:45 uevent You can flash the various blinky lights by echoing to the fault and locate files. >From the device's point of view, you can see it has an enclosure like this: sparkweed:~# ls /sys/class/scsi_disk/0\:0\:0\:0/device/ block:sda generic queue_depth state bsg:0:0:0:0 iocounterbits queue_type subsystem bus iodone_cnt rescan timeout delete ioerr_cnt rev type device_blocked iorequest_cnt scsi_device:0:0:0:0 uevent driver modalias scsi_disk:0:0:0:0 vendor enclosure_component:SLOT 001 model scsi_generic:sg0 evt_media_change power scsi_level Note the enclosure_component:SLOT 001 which shows where in the enclosure this device fits. The astute will notice that I'm using SCSI VPD Inquiries to identify the devices. This, unfortunately, won't work for SATA devices unless we do some really nasty hacking about on the SAT because the only think that knows the SAS addresses for SATA devices is libsas, not libata where the SAT resides. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-04 05:48:56 +08:00
obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hisi_sas: Add initial bare main driver This patch adds the initial bare main driver for the HiSilicon SAS HBA. This only introduces the changes to build and load the main driver module. The complete driver consists of the core main module and also a module platform driver for driving the hw. The HBA is a platform device. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-18 00:50:30 +08:00
obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas/
[SCSI] scsi: Add osd library to build system OSD in kernel source code is assumed to be at: drivers/scsi/osd/ with its own Makefile and Kconfig Add includes to them from drivers/scsi Makefile and Kconfig Add OSD to MAINTAINERS file Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 23:24:14 +08:00
scsi: link in the debug driver last If the debug driver is built-in, link it in last, so that any real drivers will probe first, rather than having the debug driver pick the first scsi slots.. Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 09:39:38 +08:00
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
scsi: Conditionally compile in constants.c Instead of having constants.c littered with ifdef statements we should be moving dummy functions into the header and condintionally compile in constants.c if selected. And update the Kconfig description to reflect the actual size difference. Suggested-by: Christoph Hellwig <hch@infradead.org> Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-08 14:43:48 +08:00
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o \
[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA With dma-mapping-prevent-dma-dependent-code-from-linking-on.patch scsi fails to build on !HAS_DMA architectures: drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map': : undefined reference to `dma_map_sg' drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap': : undefined reference to `dma_unmap_sg' I split those functions out into a new file. Builds on s390 and i386. Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if HAS_DMA is set. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-10 02:59:59 +08:00
scsicam.o scsi_error.o scsi_lib.o
scsi: Conditionally compile in constants.c Instead of having constants.c littered with ifdef statements we should be moving dummy functions into the header and condintionally compile in constants.c if selected. And update the Kconfig description to reflect the actual size difference. Suggested-by: Christoph Hellwig <hch@infradead.org> Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-08 14:43:48 +08:00
scsi_mod-$(CONFIG_SCSI_CONSTANTS) += constants.o
[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA With dma-mapping-prevent-dma-dependent-code-from-linking-on.patch scsi fails to build on !HAS_DMA architectures: drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map': : undefined reference to `dma_map_sg' drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap': : undefined reference to `dma_unmap_sg' I split those functions out into a new file. Builds on s390 and i386. Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if HAS_DMA is set. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-10 02:59:59 +08:00
scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o
scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
scsi: Implement blk_mq_ops.show_rq() Show the SCSI CDB for pending SCSI commands in /sys/kernel/debug/block/*/mq/*/dispatch and */rq_list. An example of how SCSI commands are displayed by this code: ffff8801703245c0 {.op=READ, .cmd_flags=META PRIO, .rq_flags=DONTPREP IO_STAT STATS, .tag=14, .internal_tag=-1, .cmd=Read(10) 28 00 2a 81 1b 30 00 00 08 00} Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Hannes Reinecke <hare@suse.com> Cc: <linux-scsi@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27 04:47:57 +08:00
scsi_mod-$(CONFIG_BLK_DEBUG_FS) += scsi_debugfs.o
scsi: Implement per-cpu logging buffer Implement a per-cpu buffer for formatting messages to avoid line breaks up under high load. This patch implements scmd_printk() and sdev_prefix_printk() using the per-cpu buffer and makes sdev_printk() a wrapper for sdev_prefix_printk(). Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-08 14:43:42 +08:00
scsi_mod-y += scsi_trace.o scsi_logging.o
PM: Remove CONFIG_PM_OPS After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be replaced with CONFIG_PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-11 07:06:54 +08:00
scsi_mod-$(CONFIG_PM) += scsi_pm.o
scsi_dh: integrate into the core SCSI code Stop building scsi_dh as a separate module and integrate it fully into the core SCSI code with explicit callouts at bus scan time. For now the callouts are placed at the same point as the old bus notifiers were called, but in the future we will be able to look at ALUA INQUIRY data earlier on. Note that this also means that the device handler modules need to be loaded by the time we scan the bus. The next patches will add support for autoloading device handlers at bus scan time to make sure they are always loaded if they are enabled in the kernel config. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-27 20:16:57 +08:00
scsi_mod-$(CONFIG_SCSI_DH) += scsi_dh.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Staging: hv: storvsc: Move the storage driver out of the staging area The storage driver (storvsc_drv.c) handles all block storage devices assigned to Linux guests hosted on Hyper-V. This driver has been in the staging tree for a while and this patch moves it out of the staging area. James was willing to apply this patch during the 3.3-rc phase and a decision was taken to defer this to 3.4 since Greg had queued up a bunch of storvsc patches for 3.4. Now that Greg has applied all of the pending storvsc patches, I am sending this patch to move this driver out of staging. Based on James' recommendation, this patch gets rid of the unneeded files in the staging/hv directory. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10 06:14:48 +08:00
hv_storvsc-y := storvsc_drv.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sd_mod-objs := sd.o
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field Support for controllers and disks that implement DIF protection information: - During command preparation the RDPROTECT/WRPROTECT must be set correctly if the target has DIF enabled. - READ(6) and WRITE(6) are not supported when DIF is on. - The controller must be told how to handle the I/O via the protection operation field in scsi_cmnd. - Refactor the I/O completion code that extracts failed LBA from the returned sense data and handle DIF failures correctly. - sd_dif.c implements the functions required to prepare and complete requests with protection information attached. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 16:28:35 +08:00
sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 14:40:34 +08:00
sd_mod-$(CONFIG_BLK_DEV_ZONED) += sd_zbc.o
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field Support for controllers and disks that implement DIF protection information: - During command preparation the RDPROTECT/WRPROTECT must be set correctly if the target has DIF enabled. - READ(6) and WRITE(6) are not supported when DIF is on. - The controller must be told how to handle the I/O via the protection operation field in scsi_cmnd. - Refactor the I/O completion code that extracts failed LBA from the returned sense data and handle DIF failures correctly. - sd_dif.c implements the functions required to prepare and complete requests with protection information attached. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 16:28:35 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
zalon7xx-objs := zalon.o ncr53c8xx.o
# Files generated that shall be removed upon make clean
scsi: core: clean up generated file scsi_devinfo_tbl.c "make clean" should remove the generated file "scsi_devinfo_tbl.c", so list it in the clean-files variable so that the file gets cleaned up. Fixes: 345e29608b4b ("scsi: scsi: Export blacklist flags to sysfs") Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-14 08:10:52 +08:00
clean-files := 53c700_d.h 53c700_u.h scsi_devinfo_tbl.c
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
scsi: scsi: Export blacklist flags to sysfs Each scsi device is scanned according to the found blacklist flags, but this information is never presented to sysfs. This makes it quite hard to figure out if blacklisting worked as expected. With this patch we're exporting an additional attribute 'blacklist' containing the blacklist flags for this device. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-02 22:26:34 +08:00
$(obj)/scsi_sysfs.o: $(obj)/scsi_devinfo_tbl.c
quiet_cmd_bflags = GEN $@
scsi: devinfo: warn on undefined blist flags Warn if a device (or the user) sets blist flags which are unknown or have been removed. This should enable us to reuse freed blist bits in later releases. Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-18 07:35:09 +08:00
cmd_bflags = sed -n 's/.*define *BLIST_\([A-Z0-9_]*\) *.*/BLIST_FLAG_NAME(\1),/p' $< > $@
scsi: scsi: Export blacklist flags to sysfs Each scsi device is scanned according to the found blacklist flags, but this information is never presented to sysfs. This makes it quite hard to figure out if blacklisting worked as expected. With this patch we're exporting an additional attribute 'blacklist' containing the blacklist flags for this device. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-02 22:26:34 +08:00
$(obj)/scsi_devinfo_tbl.c: include/scsi/scsi_devinfo.h
$(call if_changed,bflags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# If you want to play with the firmware, uncomment
# GENERATE_FIRMWARE := 1
ifdef GENERATE_FIRMWARE
$(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<
endif