2012-10-13 17:46:48 +08:00
|
|
|
#ifndef _UAPI_LINUX_IF_LINK_H
|
|
|
|
#define _UAPI_LINUX_IF_LINK_H
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/netlink.h>
|
|
|
|
|
|
|
|
/* This struct should be in sync with struct rtnl_link_stats64 */
|
|
|
|
struct rtnl_link_stats {
|
|
|
|
__u32 rx_packets; /* total packets received */
|
|
|
|
__u32 tx_packets; /* total packets transmitted */
|
|
|
|
__u32 rx_bytes; /* total bytes received */
|
|
|
|
__u32 tx_bytes; /* total bytes transmitted */
|
|
|
|
__u32 rx_errors; /* bad packets received */
|
|
|
|
__u32 tx_errors; /* packet transmit problems */
|
|
|
|
__u32 rx_dropped; /* no space in linux buffers */
|
|
|
|
__u32 tx_dropped; /* no space available in linux */
|
|
|
|
__u32 multicast; /* multicast packets received */
|
|
|
|
__u32 collisions;
|
|
|
|
|
|
|
|
/* detailed rx_errors: */
|
|
|
|
__u32 rx_length_errors;
|
|
|
|
__u32 rx_over_errors; /* receiver ring buff overflow */
|
|
|
|
__u32 rx_crc_errors; /* recved pkt with crc error */
|
|
|
|
__u32 rx_frame_errors; /* recv'd frame alignment error */
|
|
|
|
__u32 rx_fifo_errors; /* recv'r fifo overrun */
|
|
|
|
__u32 rx_missed_errors; /* receiver missed packet */
|
|
|
|
|
|
|
|
/* detailed tx_errors */
|
|
|
|
__u32 tx_aborted_errors;
|
|
|
|
__u32 tx_carrier_errors;
|
|
|
|
__u32 tx_fifo_errors;
|
|
|
|
__u32 tx_heartbeat_errors;
|
|
|
|
__u32 tx_window_errors;
|
|
|
|
|
|
|
|
/* for cslip etc */
|
|
|
|
__u32 rx_compressed;
|
|
|
|
__u32 tx_compressed;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* The main device statistics structure */
|
|
|
|
struct rtnl_link_stats64 {
|
|
|
|
__u64 rx_packets; /* total packets received */
|
|
|
|
__u64 tx_packets; /* total packets transmitted */
|
|
|
|
__u64 rx_bytes; /* total bytes received */
|
|
|
|
__u64 tx_bytes; /* total bytes transmitted */
|
|
|
|
__u64 rx_errors; /* bad packets received */
|
|
|
|
__u64 tx_errors; /* packet transmit problems */
|
|
|
|
__u64 rx_dropped; /* no space in linux buffers */
|
|
|
|
__u64 tx_dropped; /* no space available in linux */
|
|
|
|
__u64 multicast; /* multicast packets received */
|
|
|
|
__u64 collisions;
|
|
|
|
|
|
|
|
/* detailed rx_errors: */
|
|
|
|
__u64 rx_length_errors;
|
|
|
|
__u64 rx_over_errors; /* receiver ring buff overflow */
|
|
|
|
__u64 rx_crc_errors; /* recved pkt with crc error */
|
|
|
|
__u64 rx_frame_errors; /* recv'd frame alignment error */
|
|
|
|
__u64 rx_fifo_errors; /* recv'r fifo overrun */
|
|
|
|
__u64 rx_missed_errors; /* receiver missed packet */
|
|
|
|
|
|
|
|
/* detailed tx_errors */
|
|
|
|
__u64 tx_aborted_errors;
|
|
|
|
__u64 tx_carrier_errors;
|
|
|
|
__u64 tx_fifo_errors;
|
|
|
|
__u64 tx_heartbeat_errors;
|
|
|
|
__u64 tx_window_errors;
|
|
|
|
|
|
|
|
/* for cslip etc */
|
|
|
|
__u64 rx_compressed;
|
|
|
|
__u64 tx_compressed;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* The struct should be in sync with struct ifmap */
|
|
|
|
struct rtnl_link_ifmap {
|
|
|
|
__u64 mem_start;
|
|
|
|
__u64 mem_end;
|
|
|
|
__u64 base_addr;
|
|
|
|
__u16 irq;
|
|
|
|
__u8 dma;
|
|
|
|
__u8 port;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IFLA_AF_SPEC
|
|
|
|
* Contains nested attributes for address family specific attributes.
|
|
|
|
* Each address family may create a attribute with the address family
|
|
|
|
* number as type and create its own attribute structure in it.
|
|
|
|
*
|
|
|
|
* Example:
|
|
|
|
* [IFLA_AF_SPEC] = {
|
|
|
|
* [AF_INET] = {
|
|
|
|
* [IFLA_INET_CONF] = ...,
|
|
|
|
* },
|
|
|
|
* [AF_INET6] = {
|
|
|
|
* [IFLA_INET6_FLAGS] = ...,
|
|
|
|
* [IFLA_INET6_CONF] = ...,
|
|
|
|
* }
|
|
|
|
* }
|
|
|
|
*/
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_UNSPEC,
|
|
|
|
IFLA_ADDRESS,
|
|
|
|
IFLA_BROADCAST,
|
|
|
|
IFLA_IFNAME,
|
|
|
|
IFLA_MTU,
|
|
|
|
IFLA_LINK,
|
|
|
|
IFLA_QDISC,
|
|
|
|
IFLA_STATS,
|
|
|
|
IFLA_COST,
|
|
|
|
#define IFLA_COST IFLA_COST
|
|
|
|
IFLA_PRIORITY,
|
|
|
|
#define IFLA_PRIORITY IFLA_PRIORITY
|
|
|
|
IFLA_MASTER,
|
|
|
|
#define IFLA_MASTER IFLA_MASTER
|
|
|
|
IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */
|
|
|
|
#define IFLA_WIRELESS IFLA_WIRELESS
|
|
|
|
IFLA_PROTINFO, /* Protocol specific information for a link */
|
|
|
|
#define IFLA_PROTINFO IFLA_PROTINFO
|
|
|
|
IFLA_TXQLEN,
|
|
|
|
#define IFLA_TXQLEN IFLA_TXQLEN
|
|
|
|
IFLA_MAP,
|
|
|
|
#define IFLA_MAP IFLA_MAP
|
|
|
|
IFLA_WEIGHT,
|
|
|
|
#define IFLA_WEIGHT IFLA_WEIGHT
|
|
|
|
IFLA_OPERSTATE,
|
|
|
|
IFLA_LINKMODE,
|
|
|
|
IFLA_LINKINFO,
|
|
|
|
#define IFLA_LINKINFO IFLA_LINKINFO
|
|
|
|
IFLA_NET_NS_PID,
|
|
|
|
IFLA_IFALIAS,
|
|
|
|
IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */
|
|
|
|
IFLA_VFINFO_LIST,
|
|
|
|
IFLA_STATS64,
|
|
|
|
IFLA_VF_PORTS,
|
|
|
|
IFLA_PORT_SELF,
|
|
|
|
IFLA_AF_SPEC,
|
|
|
|
IFLA_GROUP, /* Group the device belongs to */
|
|
|
|
IFLA_NET_NS_FD,
|
|
|
|
IFLA_EXT_MASK, /* Extended info mask, VFs, etc */
|
|
|
|
IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */
|
|
|
|
#define IFLA_PROMISCUITY IFLA_PROMISCUITY
|
|
|
|
IFLA_NUM_TX_QUEUES,
|
|
|
|
IFLA_NUM_RX_QUEUES,
|
2012-12-28 07:49:39 +08:00
|
|
|
IFLA_CARRIER,
|
2013-07-30 00:16:50 +08:00
|
|
|
IFLA_PHYS_PORT_ID,
|
2014-03-30 00:48:35 +08:00
|
|
|
IFLA_CARRIER_CHANGES,
|
2014-11-28 21:34:18 +08:00
|
|
|
IFLA_PHYS_SWITCH_ID,
|
2015-01-15 22:11:16 +08:00
|
|
|
IFLA_LINK_NETNSID,
|
2015-03-18 10:23:15 +08:00
|
|
|
IFLA_PHYS_PORT_NAME,
|
2012-10-13 17:46:48 +08:00
|
|
|
__IFLA_MAX
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
#define IFLA_MAX (__IFLA_MAX - 1)
|
|
|
|
|
|
|
|
/* backwards compatibility for userspace */
|
|
|
|
#ifndef __KERNEL__
|
|
|
|
#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
|
|
|
|
#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
|
|
|
|
#endif
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_INET_UNSPEC,
|
|
|
|
IFLA_INET_CONF,
|
|
|
|
__IFLA_INET_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
|
|
|
|
|
|
|
|
/* ifi_flags.
|
|
|
|
|
|
|
|
IFF_* flags.
|
|
|
|
|
|
|
|
The only change is:
|
|
|
|
IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
|
|
|
|
more not changeable by user. They describe link media
|
|
|
|
characteristics and set by device driver.
|
|
|
|
|
|
|
|
Comments:
|
|
|
|
- Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
|
|
|
|
- If neither of these three flags are set;
|
|
|
|
the interface is NBMA.
|
|
|
|
|
|
|
|
- IFF_MULTICAST does not mean anything special:
|
|
|
|
multicasts can be used on all not-NBMA links.
|
|
|
|
IFF_MULTICAST means that this media uses special encapsulation
|
|
|
|
for multicast frames. Apparently, all IFF_POINTOPOINT and
|
|
|
|
IFF_BROADCAST devices are able to use multicasts too.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* IFLA_LINK.
|
|
|
|
For usual devices it is equal ifi_index.
|
|
|
|
If it is a "virtual interface" (f.e. tunnel), ifi_link
|
|
|
|
can point to real physical interface (f.e. for bandwidth calculations),
|
|
|
|
or maybe 0, what means, that real media is unknown (usual
|
|
|
|
for IPIP tunnels, when route to endpoint is allowed to change)
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Subtype attributes for IFLA_PROTINFO */
|
|
|
|
enum {
|
|
|
|
IFLA_INET6_UNSPEC,
|
|
|
|
IFLA_INET6_FLAGS, /* link flags */
|
|
|
|
IFLA_INET6_CONF, /* sysctl parameters */
|
|
|
|
IFLA_INET6_STATS, /* statistics */
|
|
|
|
IFLA_INET6_MCAST, /* MC things. What of them? */
|
|
|
|
IFLA_INET6_CACHEINFO, /* time values and max reasm size */
|
|
|
|
IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */
|
net: ipv6: add tokenized interface identifier support
This patch adds support for IPv6 tokenized IIDs, that allow
for administrators to assign well-known host-part addresses
to nodes whilst still obtaining global network prefix from
Router Advertisements. It is currently in draft status.
The primary target for such support is server platforms
where addresses are usually manually configured, rather
than using DHCPv6 or SLAAC. By using tokenised identifiers,
hosts can still determine their network prefix by use of
SLAAC, but more readily be automatically renumbered should
their network prefix change. [...]
The disadvantage with static addresses is that they are
likely to require manual editing should the network prefix
in use change. If instead there were a method to only
manually configure the static identifier part of the IPv6
address, then the address could be automatically updated
when a new prefix was introduced, as described in [RFC4192]
for example. In such cases a DNS server might be
configured with such a tokenised interface identifier of
::53, and SLAAC would use the token in constructing the
interface address, using the advertised prefix. [...]
http://tools.ietf.org/html/draft-chown-6man-tokenised-ipv6-identifiers-02
The implementation is partially based on top of Mark K.
Thompson's proof of concept. However, it uses the Netlink
interface for configuration resp. data retrival, so that
it can be easily extended in future. Successfully tested
by myself.
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08 12:01:30 +08:00
|
|
|
IFLA_INET6_TOKEN, /* device token */
|
2014-07-12 03:10:18 +08:00
|
|
|
IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */
|
2012-10-13 17:46:48 +08:00
|
|
|
__IFLA_INET6_MAX
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1)
|
|
|
|
|
2014-07-12 03:10:18 +08:00
|
|
|
enum in6_addr_gen_mode {
|
|
|
|
IN6_ADDR_GEN_MODE_EUI64,
|
|
|
|
IN6_ADDR_GEN_MODE_NONE,
|
|
|
|
};
|
|
|
|
|
2014-09-05 21:51:31 +08:00
|
|
|
/* Bridge section */
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_BR_UNSPEC,
|
|
|
|
IFLA_BR_FORWARD_DELAY,
|
|
|
|
IFLA_BR_HELLO_TIME,
|
|
|
|
IFLA_BR_MAX_AGE,
|
|
|
|
__IFLA_BR_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_BR_MAX (__IFLA_BR_MAX - 1)
|
|
|
|
|
2012-11-13 15:53:05 +08:00
|
|
|
enum {
|
|
|
|
BRIDGE_MODE_UNSPEC,
|
|
|
|
BRIDGE_MODE_HAIRPIN,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_BRPORT_UNSPEC,
|
|
|
|
IFLA_BRPORT_STATE, /* Spanning tree state */
|
|
|
|
IFLA_BRPORT_PRIORITY, /* " priority */
|
|
|
|
IFLA_BRPORT_COST, /* " cost */
|
|
|
|
IFLA_BRPORT_MODE, /* mode (hairpin) */
|
2012-11-13 15:53:07 +08:00
|
|
|
IFLA_BRPORT_GUARD, /* bpdu guard */
|
2012-11-13 15:53:08 +08:00
|
|
|
IFLA_BRPORT_PROTECT, /* root port protection */
|
2012-12-06 05:24:45 +08:00
|
|
|
IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */
|
2013-06-05 22:08:00 +08:00
|
|
|
IFLA_BRPORT_LEARNING, /* mac learning */
|
2013-06-05 22:08:01 +08:00
|
|
|
IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */
|
2014-10-24 05:49:17 +08:00
|
|
|
IFLA_BRPORT_PROXYARP, /* proxy ARP */
|
2014-11-28 21:34:23 +08:00
|
|
|
IFLA_BRPORT_LEARNING_SYNC, /* mac learning sync from device */
|
2015-03-04 18:54:21 +08:00
|
|
|
IFLA_BRPORT_PROXYARP_WIFI, /* proxy ARP for Wi-Fi */
|
2012-11-13 15:53:05 +08:00
|
|
|
__IFLA_BRPORT_MAX
|
|
|
|
};
|
|
|
|
#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
|
|
|
|
|
2012-10-13 17:46:48 +08:00
|
|
|
struct ifla_cacheinfo {
|
|
|
|
__u32 max_reasm_len;
|
|
|
|
__u32 tstamp; /* ipv6InterfaceTable updated timestamp */
|
|
|
|
__u32 reachable_time;
|
|
|
|
__u32 retrans_time;
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_INFO_UNSPEC,
|
|
|
|
IFLA_INFO_KIND,
|
|
|
|
IFLA_INFO_DATA,
|
|
|
|
IFLA_INFO_XSTATS,
|
2014-01-22 16:05:55 +08:00
|
|
|
IFLA_INFO_SLAVE_KIND,
|
|
|
|
IFLA_INFO_SLAVE_DATA,
|
2012-10-13 17:46:48 +08:00
|
|
|
__IFLA_INFO_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1)
|
|
|
|
|
|
|
|
/* VLAN section */
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_VLAN_UNSPEC,
|
|
|
|
IFLA_VLAN_ID,
|
|
|
|
IFLA_VLAN_FLAGS,
|
|
|
|
IFLA_VLAN_EGRESS_QOS,
|
|
|
|
IFLA_VLAN_INGRESS_QOS,
|
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 10:04:31 +08:00
|
|
|
IFLA_VLAN_PROTOCOL,
|
2012-10-13 17:46:48 +08:00
|
|
|
__IFLA_VLAN_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1)
|
|
|
|
|
|
|
|
struct ifla_vlan_flags {
|
|
|
|
__u32 flags;
|
|
|
|
__u32 mask;
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_VLAN_QOS_UNSPEC,
|
|
|
|
IFLA_VLAN_QOS_MAPPING,
|
|
|
|
__IFLA_VLAN_QOS_MAX
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1)
|
|
|
|
|
|
|
|
struct ifla_vlan_qos_mapping {
|
|
|
|
__u32 from;
|
|
|
|
__u32 to;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* MACVLAN section */
|
|
|
|
enum {
|
|
|
|
IFLA_MACVLAN_UNSPEC,
|
|
|
|
IFLA_MACVLAN_MODE,
|
|
|
|
IFLA_MACVLAN_FLAGS,
|
2014-09-25 22:31:08 +08:00
|
|
|
IFLA_MACVLAN_MACADDR_MODE,
|
|
|
|
IFLA_MACVLAN_MACADDR,
|
|
|
|
IFLA_MACVLAN_MACADDR_DATA,
|
|
|
|
IFLA_MACVLAN_MACADDR_COUNT,
|
2012-10-13 17:46:48 +08:00
|
|
|
__IFLA_MACVLAN_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
|
|
|
|
|
|
|
|
enum macvlan_mode {
|
|
|
|
MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
|
|
|
|
MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */
|
|
|
|
MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
|
|
|
|
MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
|
2014-09-25 22:31:08 +08:00
|
|
|
MACVLAN_MODE_SOURCE = 16,/* use source MAC address list to assign */
|
|
|
|
};
|
|
|
|
|
|
|
|
enum macvlan_macaddr_mode {
|
|
|
|
MACVLAN_MACADDR_ADD,
|
|
|
|
MACVLAN_MACADDR_DEL,
|
|
|
|
MACVLAN_MACADDR_FLUSH,
|
|
|
|
MACVLAN_MACADDR_SET,
|
2012-10-13 17:46:48 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define MACVLAN_FLAG_NOPROMISC 1
|
|
|
|
|
2014-11-24 15:07:46 +08:00
|
|
|
/* IPVLAN section */
|
|
|
|
enum {
|
|
|
|
IFLA_IPVLAN_UNSPEC,
|
|
|
|
IFLA_IPVLAN_MODE,
|
|
|
|
__IFLA_IPVLAN_MAX
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_IPVLAN_MAX (__IFLA_IPVLAN_MAX - 1)
|
|
|
|
|
|
|
|
enum ipvlan_mode {
|
|
|
|
IPVLAN_MODE_L2 = 0,
|
|
|
|
IPVLAN_MODE_L3,
|
|
|
|
IPVLAN_MODE_MAX
|
|
|
|
};
|
|
|
|
|
2012-10-13 17:46:48 +08:00
|
|
|
/* VXLAN section */
|
|
|
|
enum {
|
|
|
|
IFLA_VXLAN_UNSPEC,
|
|
|
|
IFLA_VXLAN_ID,
|
2013-04-27 19:31:55 +08:00
|
|
|
IFLA_VXLAN_GROUP, /* group or remote address */
|
2012-10-13 17:46:48 +08:00
|
|
|
IFLA_VXLAN_LINK,
|
|
|
|
IFLA_VXLAN_LOCAL,
|
|
|
|
IFLA_VXLAN_TTL,
|
|
|
|
IFLA_VXLAN_TOS,
|
|
|
|
IFLA_VXLAN_LEARNING,
|
|
|
|
IFLA_VXLAN_AGEING,
|
|
|
|
IFLA_VXLAN_LIMIT,
|
2013-04-27 19:31:57 +08:00
|
|
|
IFLA_VXLAN_PORT_RANGE, /* source port */
|
2012-11-20 10:50:14 +08:00
|
|
|
IFLA_VXLAN_PROXY,
|
|
|
|
IFLA_VXLAN_RSC,
|
|
|
|
IFLA_VXLAN_L2MISS,
|
|
|
|
IFLA_VXLAN_L3MISS,
|
2013-04-27 19:31:57 +08:00
|
|
|
IFLA_VXLAN_PORT, /* destination port */
|
2013-08-31 13:44:33 +08:00
|
|
|
IFLA_VXLAN_GROUP6,
|
|
|
|
IFLA_VXLAN_LOCAL6,
|
2014-06-05 08:20:29 +08:00
|
|
|
IFLA_VXLAN_UDP_CSUM,
|
|
|
|
IFLA_VXLAN_UDP_ZERO_CSUM6_TX,
|
|
|
|
IFLA_VXLAN_UDP_ZERO_CSUM6_RX,
|
2015-01-13 09:00:38 +08:00
|
|
|
IFLA_VXLAN_REMCSUM_TX,
|
|
|
|
IFLA_VXLAN_REMCSUM_RX,
|
vxlan: Group Policy extension
Implements supports for the Group Policy VXLAN extension [0] to provide
a lightweight and simple security label mechanism across network peers
based on VXLAN. The security context and associated metadata is mapped
to/from skb->mark. This allows further mapping to a SELinux context
using SECMARK, to implement ACLs directly with nftables, iptables, OVS,
tc, etc.
The group membership is defined by the lower 16 bits of skb->mark, the
upper 16 bits are used for flags.
SELinux allows to manage label to secure local resources. However,
distributed applications require ACLs to implemented across hosts. This
is typically achieved by matching on L2-L4 fields to identify the
original sending host and process on the receiver. On top of that,
netlabel and specifically CIPSO [1] allow to map security contexts to
universal labels. However, netlabel and CIPSO are relatively complex.
This patch provides a lightweight alternative for overlay network
environments with a trusted underlay. No additional control protocol
is required.
Host 1: Host 2:
Group A Group B Group B Group A
+-----+ +-------------+ +-------+ +-----+
| lxc | | SELinux CTX | | httpd | | VM |
+--+--+ +--+----------+ +---+---+ +--+--+
\---+---/ \----+---/
| |
+---+---+ +---+---+
| vxlan | | vxlan |
+---+---+ +---+---+
+------------------------------+
Backwards compatibility:
A VXLAN-GBP socket can receive standard VXLAN frames and will assign
the default group 0x0000 to such frames. A Linux VXLAN socket will
drop VXLAN-GBP frames. The extension is therefore disabled by default
and needs to be specifically enabled:
ip link add [...] type vxlan [...] gbp
In a mixed environment with VXLAN and VXLAN-GBP sockets, the GBP socket
must run on a separate port number.
Examples:
iptables:
host1# iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200
host2# iptables -I INPUT -m mark --mark 0x200 -j DROP
OVS:
# ovs-ofctl add-flow br0 'in_port=1,actions=load:0x200->NXM_NX_TUN_GBP_ID[],NORMAL'
# ovs-ofctl add-flow br0 'in_port=2,tun_gbp_id=0x200,actions=drop'
[0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy
[1] http://lwn.net/Articles/204905/
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 10:53:55 +08:00
|
|
|
IFLA_VXLAN_GBP,
|
2015-02-11 08:30:32 +08:00
|
|
|
IFLA_VXLAN_REMCSUM_NOPARTIAL,
|
2012-10-13 17:46:48 +08:00
|
|
|
__IFLA_VXLAN_MAX
|
|
|
|
};
|
|
|
|
#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
|
|
|
|
|
|
|
|
struct ifla_vxlan_port_range {
|
|
|
|
__be16 low;
|
|
|
|
__be16 high;
|
|
|
|
};
|
|
|
|
|
2013-10-18 23:43:38 +08:00
|
|
|
/* Bonding section */
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_BOND_UNSPEC,
|
|
|
|
IFLA_BOND_MODE,
|
2013-10-18 23:43:39 +08:00
|
|
|
IFLA_BOND_ACTIVE_SLAVE,
|
2013-12-13 06:09:55 +08:00
|
|
|
IFLA_BOND_MIIMON,
|
2013-12-13 06:10:02 +08:00
|
|
|
IFLA_BOND_UPDELAY,
|
2013-12-13 06:10:09 +08:00
|
|
|
IFLA_BOND_DOWNDELAY,
|
2013-12-13 06:10:16 +08:00
|
|
|
IFLA_BOND_USE_CARRIER,
|
2013-12-13 06:10:24 +08:00
|
|
|
IFLA_BOND_ARP_INTERVAL,
|
2013-12-13 06:10:31 +08:00
|
|
|
IFLA_BOND_ARP_IP_TARGET,
|
2013-12-13 06:10:38 +08:00
|
|
|
IFLA_BOND_ARP_VALIDATE,
|
2013-12-13 06:10:45 +08:00
|
|
|
IFLA_BOND_ARP_ALL_TARGETS,
|
2013-12-16 08:41:51 +08:00
|
|
|
IFLA_BOND_PRIMARY,
|
2013-12-16 08:41:58 +08:00
|
|
|
IFLA_BOND_PRIMARY_RESELECT,
|
2013-12-16 08:42:05 +08:00
|
|
|
IFLA_BOND_FAIL_OVER_MAC,
|
2013-12-16 08:42:12 +08:00
|
|
|
IFLA_BOND_XMIT_HASH_POLICY,
|
2013-12-16 08:42:19 +08:00
|
|
|
IFLA_BOND_RESEND_IGMP,
|
2013-12-18 13:30:09 +08:00
|
|
|
IFLA_BOND_NUM_PEER_NOTIF,
|
2013-12-18 13:30:16 +08:00
|
|
|
IFLA_BOND_ALL_SLAVES_ACTIVE,
|
2013-12-18 13:30:23 +08:00
|
|
|
IFLA_BOND_MIN_LINKS,
|
2013-12-18 13:30:30 +08:00
|
|
|
IFLA_BOND_LP_INTERVAL,
|
2013-12-18 13:30:37 +08:00
|
|
|
IFLA_BOND_PACKETS_PER_SLAVE,
|
2014-01-04 06:18:41 +08:00
|
|
|
IFLA_BOND_AD_LACP_RATE,
|
2014-01-04 06:18:49 +08:00
|
|
|
IFLA_BOND_AD_SELECT,
|
2014-01-04 06:18:56 +08:00
|
|
|
IFLA_BOND_AD_INFO,
|
2013-10-18 23:43:38 +08:00
|
|
|
__IFLA_BOND_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1)
|
|
|
|
|
2014-01-04 06:18:56 +08:00
|
|
|
enum {
|
2014-01-23 23:51:27 +08:00
|
|
|
IFLA_BOND_AD_INFO_UNSPEC,
|
2014-01-04 06:18:56 +08:00
|
|
|
IFLA_BOND_AD_INFO_AGGREGATOR,
|
|
|
|
IFLA_BOND_AD_INFO_NUM_PORTS,
|
|
|
|
IFLA_BOND_AD_INFO_ACTOR_KEY,
|
|
|
|
IFLA_BOND_AD_INFO_PARTNER_KEY,
|
|
|
|
IFLA_BOND_AD_INFO_PARTNER_MAC,
|
|
|
|
__IFLA_BOND_AD_INFO_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_BOND_AD_INFO_MAX (__IFLA_BOND_AD_INFO_MAX - 1)
|
|
|
|
|
2014-01-17 14:57:56 +08:00
|
|
|
enum {
|
2014-01-22 16:05:54 +08:00
|
|
|
IFLA_BOND_SLAVE_UNSPEC,
|
|
|
|
IFLA_BOND_SLAVE_STATE,
|
|
|
|
IFLA_BOND_SLAVE_MII_STATUS,
|
|
|
|
IFLA_BOND_SLAVE_LINK_FAILURE_COUNT,
|
|
|
|
IFLA_BOND_SLAVE_PERM_HWADDR,
|
|
|
|
IFLA_BOND_SLAVE_QUEUE_ID,
|
|
|
|
IFLA_BOND_SLAVE_AD_AGGREGATOR_ID,
|
|
|
|
__IFLA_BOND_SLAVE_MAX,
|
2014-01-17 14:57:56 +08:00
|
|
|
};
|
|
|
|
|
2014-01-22 16:05:54 +08:00
|
|
|
#define IFLA_BOND_SLAVE_MAX (__IFLA_BOND_SLAVE_MAX - 1)
|
2014-01-17 14:57:56 +08:00
|
|
|
|
2012-10-13 17:46:48 +08:00
|
|
|
/* SR-IOV virtual function management section */
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_VF_INFO_UNSPEC,
|
|
|
|
IFLA_VF_INFO,
|
|
|
|
__IFLA_VF_INFO_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_VF_UNSPEC,
|
|
|
|
IFLA_VF_MAC, /* Hardware queue specific attributes */
|
|
|
|
IFLA_VF_VLAN,
|
net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool.
o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed
to have a bandwidth of at least this value.
max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth
of up to this value.
o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced
which takes 4 arguments:
netdev, VF number, min_tx_rate, max_tx_rate
o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler.
o Drivers that currently implement ndo_set_vf_tx_rate should now call
ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth
greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet
implemented by driver.
o If user enters only one of either min_tx_rate or max_tx_rate, then,
userland should read back the other value from driver and set both
for IFLA_VF_RATE.
Drivers that have not yet implemented IFLA_VF_RATE should always
return min_tx_rate as 0 when read from ip tool.
o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then
IFLA_VF_RATE should override.
o Idea is to have consistent display of rate values to user.
o Usage example: -
./ip link set p4p1 vf 0 rate 900
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps,
min_tx_rate 200Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
./ip link set p4p1 vf 0 max_tx_rate 600 rate 300
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps,
min_tx_rate 200Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22 21:59:05 +08:00
|
|
|
IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */
|
2012-10-13 17:46:48 +08:00
|
|
|
IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */
|
2013-06-13 18:19:10 +08:00
|
|
|
IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */
|
net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool.
o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed
to have a bandwidth of at least this value.
max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth
of up to this value.
o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced
which takes 4 arguments:
netdev, VF number, min_tx_rate, max_tx_rate
o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler.
o Drivers that currently implement ndo_set_vf_tx_rate should now call
ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth
greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet
implemented by driver.
o If user enters only one of either min_tx_rate or max_tx_rate, then,
userland should read back the other value from driver and set both
for IFLA_VF_RATE.
Drivers that have not yet implemented IFLA_VF_RATE should always
return min_tx_rate as 0 when read from ip tool.
o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then
IFLA_VF_RATE should override.
o Idea is to have consistent display of rate values to user.
o Usage example: -
./ip link set p4p1 vf 0 rate 900
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps,
min_tx_rate 200Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
./ip link set p4p1 vf 0 max_tx_rate 600 rate 300
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps,
min_tx_rate 200Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22 21:59:05 +08:00
|
|
|
IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */
|
2012-10-13 17:46:48 +08:00
|
|
|
__IFLA_VF_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
|
|
|
|
|
|
|
|
struct ifla_vf_mac {
|
|
|
|
__u32 vf;
|
|
|
|
__u8 mac[32]; /* MAX_ADDR_LEN */
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ifla_vf_vlan {
|
|
|
|
__u32 vf;
|
|
|
|
__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
|
|
|
|
__u32 qos;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ifla_vf_tx_rate {
|
|
|
|
__u32 vf;
|
|
|
|
__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
|
|
|
|
};
|
|
|
|
|
net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool.
o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed
to have a bandwidth of at least this value.
max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth
of up to this value.
o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced
which takes 4 arguments:
netdev, VF number, min_tx_rate, max_tx_rate
o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler.
o Drivers that currently implement ndo_set_vf_tx_rate should now call
ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth
greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet
implemented by driver.
o If user enters only one of either min_tx_rate or max_tx_rate, then,
userland should read back the other value from driver and set both
for IFLA_VF_RATE.
Drivers that have not yet implemented IFLA_VF_RATE should always
return min_tx_rate as 0 when read from ip tool.
o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then
IFLA_VF_RATE should override.
o Idea is to have consistent display of rate values to user.
o Usage example: -
./ip link set p4p1 vf 0 rate 900
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps,
min_tx_rate 200Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
./ip link set p4p1 vf 0 max_tx_rate 600 rate 300
./ip link show p4p1
32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT qlen 1000
link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff
vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps,
min_tx_rate 200Mbps
vf 1 MAC f6:c6:7c:3f:3d:6c
vf 2 MAC 56:32:43:98:d7:71
vf 3 MAC d6:be:c3:b5:85:ff
vf 4 MAC ee:a9:9a:1e:19:14
vf 5 MAC 4a:d0:4c:07:52:18
vf 6 MAC 3a:76:44:93:62:f9
vf 7 MAC 82:e9:e7:e3:15:1a
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22 21:59:05 +08:00
|
|
|
struct ifla_vf_rate {
|
|
|
|
__u32 vf;
|
|
|
|
__u32 min_tx_rate; /* Min Bandwidth in Mbps */
|
|
|
|
__u32 max_tx_rate; /* Max Bandwidth in Mbps */
|
|
|
|
};
|
|
|
|
|
2012-10-13 17:46:48 +08:00
|
|
|
struct ifla_vf_spoofchk {
|
|
|
|
__u32 vf;
|
|
|
|
__u32 setting;
|
|
|
|
};
|
|
|
|
|
2013-06-13 18:19:10 +08:00
|
|
|
enum {
|
|
|
|
IFLA_VF_LINK_STATE_AUTO, /* link state of the uplink */
|
|
|
|
IFLA_VF_LINK_STATE_ENABLE, /* link always up */
|
|
|
|
IFLA_VF_LINK_STATE_DISABLE, /* link always down */
|
|
|
|
__IFLA_VF_LINK_STATE_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ifla_vf_link_state {
|
|
|
|
__u32 vf;
|
|
|
|
__u32 link_state;
|
|
|
|
};
|
|
|
|
|
2012-10-13 17:46:48 +08:00
|
|
|
/* VF ports management section
|
|
|
|
*
|
|
|
|
* Nested layout of set/get msg is:
|
|
|
|
*
|
|
|
|
* [IFLA_NUM_VF]
|
|
|
|
* [IFLA_VF_PORTS]
|
|
|
|
* [IFLA_VF_PORT]
|
|
|
|
* [IFLA_PORT_*], ...
|
|
|
|
* [IFLA_VF_PORT]
|
|
|
|
* [IFLA_PORT_*], ...
|
|
|
|
* ...
|
|
|
|
* [IFLA_PORT_SELF]
|
|
|
|
* [IFLA_PORT_*], ...
|
|
|
|
*/
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_VF_PORT_UNSPEC,
|
|
|
|
IFLA_VF_PORT, /* nest */
|
|
|
|
__IFLA_VF_PORT_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_PORT_UNSPEC,
|
|
|
|
IFLA_PORT_VF, /* __u32 */
|
|
|
|
IFLA_PORT_PROFILE, /* string */
|
|
|
|
IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */
|
|
|
|
IFLA_PORT_INSTANCE_UUID, /* binary UUID */
|
|
|
|
IFLA_PORT_HOST_UUID, /* binary UUID */
|
|
|
|
IFLA_PORT_REQUEST, /* __u8 */
|
|
|
|
IFLA_PORT_RESPONSE, /* __u16, output only */
|
|
|
|
__IFLA_PORT_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
|
|
|
|
|
|
|
|
#define PORT_PROFILE_MAX 40
|
|
|
|
#define PORT_UUID_MAX 16
|
|
|
|
#define PORT_SELF_VF -1
|
|
|
|
|
|
|
|
enum {
|
|
|
|
PORT_REQUEST_PREASSOCIATE = 0,
|
|
|
|
PORT_REQUEST_PREASSOCIATE_RR,
|
|
|
|
PORT_REQUEST_ASSOCIATE,
|
|
|
|
PORT_REQUEST_DISASSOCIATE,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
PORT_VDP_RESPONSE_SUCCESS = 0,
|
|
|
|
PORT_VDP_RESPONSE_INVALID_FORMAT,
|
|
|
|
PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
|
|
|
|
PORT_VDP_RESPONSE_UNUSED_VTID,
|
|
|
|
PORT_VDP_RESPONSE_VTID_VIOLATION,
|
|
|
|
PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
|
|
|
|
PORT_VDP_RESPONSE_OUT_OF_SYNC,
|
|
|
|
/* 0x08-0xFF reserved for future VDP use */
|
|
|
|
PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
|
|
|
|
PORT_PROFILE_RESPONSE_INPROGRESS,
|
|
|
|
PORT_PROFILE_RESPONSE_INVALID,
|
|
|
|
PORT_PROFILE_RESPONSE_BADSTATE,
|
|
|
|
PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
|
|
|
|
PORT_PROFILE_RESPONSE_ERROR,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ifla_port_vsi {
|
|
|
|
__u8 vsi_mgr_id;
|
|
|
|
__u8 vsi_type_id[3];
|
|
|
|
__u8 vsi_type_version;
|
|
|
|
__u8 pad[3];
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/* IPoIB section */
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_IPOIB_UNSPEC,
|
|
|
|
IFLA_IPOIB_PKEY,
|
|
|
|
IFLA_IPOIB_MODE,
|
|
|
|
IFLA_IPOIB_UMCAST,
|
|
|
|
__IFLA_IPOIB_MAX
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */
|
|
|
|
IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
|
|
|
|
|
2013-10-31 04:10:47 +08:00
|
|
|
|
|
|
|
/* HSR section */
|
|
|
|
|
|
|
|
enum {
|
|
|
|
IFLA_HSR_UNSPEC,
|
|
|
|
IFLA_HSR_SLAVE1,
|
|
|
|
IFLA_HSR_SLAVE2,
|
2013-11-30 06:38:16 +08:00
|
|
|
IFLA_HSR_MULTICAST_SPEC, /* Last byte of supervision addr */
|
|
|
|
IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */
|
|
|
|
IFLA_HSR_SEQ_NR,
|
2013-10-31 04:10:47 +08:00
|
|
|
__IFLA_HSR_MAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1)
|
|
|
|
|
2012-10-13 17:46:48 +08:00
|
|
|
#endif /* _UAPI_LINUX_IF_LINK_H */
|