OpenCloudOS-Kernel/drivers/char/tpm/tpm-interface.c

1169 lines
28 KiB
C
Raw Normal View History

/*
* Copyright (C) 2004 IBM Corporation
* Copyright (C) 2014 Intel Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
* Dave Safford <safford@watson.ibm.com>
* Reiner Sailer <sailer@watson.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* Device driver for TCG/TCPA TPM (trusted platform module).
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
* Specifications at www.trustedcomputinggroup.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2 of the
* License.
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
*
* Note, the TPM chip is not interrupt driven (only polling)
* and can have very long timeouts (minutes!). Hence the unusual
* calls to msleep.
*
*/
#include <linux/poll.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/freezer.h>
#include "tpm.h"
#include "tpm_eventlog.h"
#define TPM_MAX_ORDINAL 243
#define TSC_MAX_ORDINAL 12
#define TPM_PROTECTED_COMMAND 0x00
#define TPM_CONNECTION_COMMAND 0x40
/*
* Bug workaround - some TPM's don't flush the most
* recently changed pcr on suspend, so force the flush
* with an extend to the selected _unused_ non-volatile pcr.
*/
static int tpm_suspend_pcr;
module_param_named(suspend_pcr, tpm_suspend_pcr, uint, 0644);
MODULE_PARM_DESC(suspend_pcr,
"PCR to use for dummy writes to faciltate flush on suspend.");
/*
* Array with one entry per ordinal defining the maximum amount
* of time the chip could take to return the result. The ordinal
* designation of short, medium or long is defined in a table in
* TCG Specification TPM Main Part 2 TPM Structures Section 17. The
* values of the SHORT, MEDIUM, and LONG durations are retrieved
* from the chip during initialization with a call to tpm_get_timeouts.
*/
static const u8 tpm_ordinal_duration[TPM_MAX_ORDINAL] = {
TPM_UNDEFINED, /* 0 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 5 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 10 */
TPM_SHORT,
TPM_MEDIUM,
TPM_LONG,
TPM_LONG,
TPM_MEDIUM, /* 15 */
TPM_SHORT,
TPM_SHORT,
TPM_MEDIUM,
TPM_LONG,
TPM_SHORT, /* 20 */
TPM_SHORT,
TPM_MEDIUM,
TPM_MEDIUM,
TPM_MEDIUM,
TPM_SHORT, /* 25 */
TPM_SHORT,
TPM_MEDIUM,
TPM_SHORT,
TPM_SHORT,
TPM_MEDIUM, /* 30 */
TPM_LONG,
TPM_MEDIUM,
TPM_SHORT,
TPM_SHORT,
TPM_SHORT, /* 35 */
TPM_MEDIUM,
TPM_MEDIUM,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_MEDIUM, /* 40 */
TPM_LONG,
TPM_MEDIUM,
TPM_SHORT,
TPM_SHORT,
TPM_SHORT, /* 45 */
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_LONG,
TPM_MEDIUM, /* 50 */
TPM_MEDIUM,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 55 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_MEDIUM, /* 60 */
TPM_MEDIUM,
TPM_MEDIUM,
TPM_SHORT,
TPM_SHORT,
TPM_MEDIUM, /* 65 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 70 */
TPM_SHORT,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 75 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_LONG, /* 80 */
TPM_UNDEFINED,
TPM_MEDIUM,
TPM_LONG,
TPM_SHORT,
TPM_UNDEFINED, /* 85 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 90 */
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_UNDEFINED, /* 95 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_MEDIUM, /* 100 */
TPM_SHORT,
TPM_SHORT,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 105 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 110 */
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_SHORT, /* 115 */
TPM_SHORT,
TPM_SHORT,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_LONG, /* 120 */
TPM_LONG,
TPM_MEDIUM,
TPM_UNDEFINED,
TPM_SHORT,
TPM_SHORT, /* 125 */
TPM_SHORT,
TPM_LONG,
TPM_SHORT,
TPM_SHORT,
TPM_SHORT, /* 130 */
TPM_MEDIUM,
TPM_UNDEFINED,
TPM_SHORT,
TPM_MEDIUM,
TPM_UNDEFINED, /* 135 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 140 */
TPM_SHORT,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 145 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 150 */
TPM_MEDIUM,
TPM_MEDIUM,
TPM_SHORT,
TPM_SHORT,
TPM_UNDEFINED, /* 155 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 160 */
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 165 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_LONG, /* 170 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 175 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_MEDIUM, /* 180 */
TPM_SHORT,
TPM_MEDIUM,
TPM_MEDIUM,
TPM_MEDIUM,
TPM_MEDIUM, /* 185 */
TPM_SHORT,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 190 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 195 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 200 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT,
TPM_SHORT, /* 205 */
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_MEDIUM, /* 210 */
TPM_UNDEFINED,
TPM_MEDIUM,
TPM_MEDIUM,
TPM_MEDIUM,
TPM_UNDEFINED, /* 215 */
TPM_MEDIUM,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT,
TPM_SHORT, /* 220 */
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_SHORT,
TPM_UNDEFINED, /* 225 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 230 */
TPM_LONG,
TPM_MEDIUM,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED, /* 235 */
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_UNDEFINED,
TPM_SHORT, /* 240 */
TPM_UNDEFINED,
TPM_MEDIUM,
};
/*
* Returns max number of jiffies to wait
*/
unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip,
u32 ordinal)
{
int duration_idx = TPM_UNDEFINED;
int duration = 0;
/*
* We only have a duration table for protected commands, where the upper
* 16 bits are 0. For the few other ordinals the fallback will be used.
*/
if (ordinal < TPM_MAX_ORDINAL)
duration_idx = tpm_ordinal_duration[ordinal];
if (duration_idx != TPM_UNDEFINED)
duration = chip->duration[duration_idx];
if (duration <= 0)
return 2 * 60 * HZ;
else
return duration;
}
EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
/*
* Internal kernel interface to transmit TPM commands
*/
ssize_t tpm_transmit(struct tpm_chip *chip, const u8 *buf, size_t bufsiz,
unsigned int flags)
{
ssize_t rc;
u32 count, ordinal;
unsigned long stop;
if (bufsiz < TPM_HEADER_SIZE)
return -EINVAL;
if (bufsiz > TPM_BUFSIZE)
bufsiz = TPM_BUFSIZE;
count = be32_to_cpu(*((__be32 *) (buf + 2)));
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
if (count == 0)
return -ENODATA;
if (count > bufsiz) {
dev_err(&chip->dev,
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
"invalid count value %x %zx\n", count, bufsiz);
return -E2BIG;
}
if (!(flags & TPM_TRANSMIT_UNLOCKED))
mutex_lock(&chip->tpm_mutex);
rc = chip->ops->send(chip, (u8 *) buf, count);
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
if (rc < 0) {
dev_err(&chip->dev,
"tpm_transmit: tpm_send: error %zd\n", rc);
goto out;
}
if (chip->flags & TPM_CHIP_FLAG_IRQ)
goto out_recv;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
stop = jiffies + tpm2_calc_ordinal_duration(chip, ordinal);
else
stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
do {
u8 status = chip->ops->status(chip);
if ((status & chip->ops->req_complete_mask) ==
chip->ops->req_complete_val)
goto out_recv;
if (chip->ops->req_canceled(chip, status)) {
dev_err(&chip->dev, "Operation Canceled\n");
rc = -ECANCELED;
goto out;
}
msleep(TPM_TIMEOUT); /* CHECK */
rmb();
} while (time_before(jiffies, stop));
chip->ops->cancel(chip);
dev_err(&chip->dev, "Operation Timed out\n");
rc = -ETIME;
goto out;
out_recv:
rc = chip->ops->recv(chip, (u8 *) buf, bufsiz);
if (rc < 0)
dev_err(&chip->dev,
"tpm_transmit: tpm_recv: error %zd\n", rc);
out:
if (!(flags & TPM_TRANSMIT_UNLOCKED))
mutex_unlock(&chip->tpm_mutex);
return rc;
}
#define TPM_DIGEST_SIZE 20
#define TPM_RET_CODE_IDX 6
ssize_t tpm_transmit_cmd(struct tpm_chip *chip, const void *cmd,
int len, unsigned int flags, const char *desc)
{
const struct tpm_output_header *header;
int err;
len = tpm_transmit(chip, (const u8 *)cmd, len, flags);
if (len < 0)
return len;
else if (len < TPM_HEADER_SIZE)
return -EFAULT;
header = cmd;
err = be32_to_cpu(header->return_code);
if (err != 0 && desc)
dev_err(&chip->dev, "A TPM error (%d) occurred %s\n", err,
desc);
return err;
}
#define TPM_INTERNAL_RESULT_SIZE 200
#define TPM_ORD_GET_CAP cpu_to_be32(101)
#define TPM_ORD_GET_RANDOM cpu_to_be32(70)
static const struct tpm_input_header tpm_getcap_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(22),
.ordinal = TPM_ORD_GET_CAP
};
ssize_t tpm_getcap(struct tpm_chip *chip, __be32 subcap_id, cap_t *cap,
const char *desc)
{
struct tpm_cmd_t tpm_cmd;
int rc;
tpm_cmd.header.in = tpm_getcap_header;
if (subcap_id == CAP_VERSION_1_1 || subcap_id == CAP_VERSION_1_2) {
tpm_cmd.params.getcap_in.cap = subcap_id;
/*subcap field not necessary */
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(0);
tpm_cmd.header.in.length -= cpu_to_be32(sizeof(__be32));
} else {
if (subcap_id == TPM_CAP_FLAG_PERM ||
subcap_id == TPM_CAP_FLAG_VOL)
tpm_cmd.params.getcap_in.cap = TPM_CAP_FLAG;
else
tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP;
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = subcap_id;
}
rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
desc);
if (!rc)
*cap = tpm_cmd.params.getcap_out.cap;
return rc;
}
EXPORT_SYMBOL_GPL(tpm_getcap);
#define TPM_ORD_STARTUP cpu_to_be32(153)
#define TPM_ST_CLEAR cpu_to_be16(1)
#define TPM_ST_STATE cpu_to_be16(2)
#define TPM_ST_DEACTIVATED cpu_to_be16(3)
static const struct tpm_input_header tpm_startup_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(12),
.ordinal = TPM_ORD_STARTUP
};
static int tpm_startup(struct tpm_chip *chip, __be16 startup_type)
{
struct tpm_cmd_t start_cmd;
start_cmd.header.in = tpm_startup_header;
start_cmd.params.startup_in.startup_type = startup_type;
return tpm_transmit_cmd(chip, &start_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
"attempting to start the TPM");
}
int tpm_get_timeouts(struct tpm_chip *chip)
{
struct tpm_cmd_t tpm_cmd;
unsigned long new_timeout[4];
unsigned long old_timeout[4];
struct duration_t *duration_cap;
ssize_t rc;
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
/* Fixed timeouts for TPM2 */
chip->timeout_a = msecs_to_jiffies(TPM2_TIMEOUT_A);
chip->timeout_b = msecs_to_jiffies(TPM2_TIMEOUT_B);
chip->timeout_c = msecs_to_jiffies(TPM2_TIMEOUT_C);
chip->timeout_d = msecs_to_jiffies(TPM2_TIMEOUT_D);
chip->duration[TPM_SHORT] =
msecs_to_jiffies(TPM2_DURATION_SHORT);
chip->duration[TPM_MEDIUM] =
msecs_to_jiffies(TPM2_DURATION_MEDIUM);
chip->duration[TPM_LONG] =
msecs_to_jiffies(TPM2_DURATION_LONG);
return 0;
}
tpm_cmd.header.in = tpm_getcap_header;
tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP;
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT;
rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
NULL);
if (rc == TPM_ERR_INVALID_POSTINIT) {
/* The TPM is not started, we are the first to talk to it.
Execute a startup command. */
dev_info(&chip->dev, "Issuing TPM_STARTUP");
if (tpm_startup(chip, TPM_ST_CLEAR))
return rc;
tpm_cmd.header.in = tpm_getcap_header;
tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP;
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_TIMEOUT;
rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE,
0, NULL);
}
if (rc) {
dev_err(&chip->dev,
"A TPM error (%zd) occurred attempting to determine the timeouts\n",
rc);
goto duration;
}
if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
be32_to_cpu(tpm_cmd.header.out.length)
!= sizeof(tpm_cmd.header.out) + sizeof(u32) + 4 * sizeof(u32))
return -EINVAL;
old_timeout[0] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.a);
old_timeout[1] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.b);
old_timeout[2] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.c);
old_timeout[3] = be32_to_cpu(tpm_cmd.params.getcap_out.cap.timeout.d);
memcpy(new_timeout, old_timeout, sizeof(new_timeout));
/*
* Provide ability for vendor overrides of timeout values in case
* of misreporting.
*/
if (chip->ops->update_timeouts != NULL)
chip->timeout_adjusted =
chip->ops->update_timeouts(chip, new_timeout);
if (!chip->timeout_adjusted) {
/* Don't overwrite default if value is 0 */
if (new_timeout[0] != 0 && new_timeout[0] < 1000) {
int i;
/* timeouts in msec rather usec */
for (i = 0; i != ARRAY_SIZE(new_timeout); i++)
new_timeout[i] *= 1000;
chip->timeout_adjusted = true;
}
}
/* Report adjusted timeouts */
if (chip->timeout_adjusted) {
dev_info(&chip->dev,
HW_ERR "Adjusting reported timeouts: A %lu->%luus B %lu->%luus C %lu->%luus D %lu->%luus\n",
old_timeout[0], new_timeout[0],
old_timeout[1], new_timeout[1],
old_timeout[2], new_timeout[2],
old_timeout[3], new_timeout[3]);
}
chip->timeout_a = usecs_to_jiffies(new_timeout[0]);
chip->timeout_b = usecs_to_jiffies(new_timeout[1]);
chip->timeout_c = usecs_to_jiffies(new_timeout[2]);
chip->timeout_d = usecs_to_jiffies(new_timeout[3]);
duration:
tpm_cmd.header.in = tpm_getcap_header;
tpm_cmd.params.getcap_in.cap = TPM_CAP_PROP;
tpm_cmd.params.getcap_in.subcap_size = cpu_to_be32(4);
tpm_cmd.params.getcap_in.subcap = TPM_CAP_PROP_TIS_DURATION;
rc = tpm_transmit_cmd(chip, &tpm_cmd, TPM_INTERNAL_RESULT_SIZE, 0,
"attempting to determine the durations");
if (rc)
return rc;
if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
be32_to_cpu(tpm_cmd.header.out.length)
!= sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
return -EINVAL;
duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
chip->duration[TPM_SHORT] =
usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
chip->duration[TPM_MEDIUM] =
usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_medium));
chip->duration[TPM_LONG] =
usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_long));
/* The Broadcom BCM0102 chipset in a Dell Latitude D820 gets the above
* value wrong and apparently reports msecs rather than usecs. So we
* fix up the resulting too-small TPM_SHORT value to make things work.
* We also scale the TPM_MEDIUM and -_LONG values by 1000.
*/
if (chip->duration[TPM_SHORT] < (HZ / 100)) {
chip->duration[TPM_SHORT] = HZ;
chip->duration[TPM_MEDIUM] *= 1000;
chip->duration[TPM_LONG] *= 1000;
chip->duration_adjusted = true;
dev_info(&chip->dev, "Adjusting TPM timeout parameters.");
}
return 0;
}
EXPORT_SYMBOL_GPL(tpm_get_timeouts);
#define TPM_ORD_CONTINUE_SELFTEST 83
#define CONTINUE_SELFTEST_RESULT_SIZE 10
static const struct tpm_input_header continue_selftest_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(10),
.ordinal = cpu_to_be32(TPM_ORD_CONTINUE_SELFTEST),
};
/**
* tpm_continue_selftest -- run TPM's selftest
* @chip: TPM chip to use
*
* Returns 0 on success, < 0 in case of fatal error or a value > 0 representing
* a TPM error code.
*/
static int tpm_continue_selftest(struct tpm_chip *chip)
{
int rc;
struct tpm_cmd_t cmd;
cmd.header.in = continue_selftest_header;
rc = tpm_transmit_cmd(chip, &cmd, CONTINUE_SELFTEST_RESULT_SIZE, 0,
"continue selftest");
return rc;
}
#define TPM_ORDINAL_PCRREAD cpu_to_be32(21)
#define READ_PCR_RESULT_SIZE 30
static const struct tpm_input_header pcrread_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(14),
.ordinal = TPM_ORDINAL_PCRREAD
};
int tpm_pcr_read_dev(struct tpm_chip *chip, int pcr_idx, u8 *res_buf)
{
int rc;
struct tpm_cmd_t cmd;
cmd.header.in = pcrread_header;
cmd.params.pcrread_in.pcr_idx = cpu_to_be32(pcr_idx);
rc = tpm_transmit_cmd(chip, &cmd, READ_PCR_RESULT_SIZE, 0,
"attempting to read a pcr value");
if (rc == 0)
memcpy(res_buf, cmd.params.pcrread_out.pcr_result,
TPM_DIGEST_SIZE);
return rc;
}
/**
* tpm_is_tpm2 - is the chip a TPM2 chip?
* @chip_num: tpm idx # or ANY
*
* Returns < 0 on error, and 1 or 0 on success depending whether the chip
* is a TPM2 chip.
*/
int tpm_is_tpm2(u32 chip_num)
{
struct tpm_chip *chip;
int rc;
chip = tpm_chip_find_get(chip_num);
if (chip == NULL)
return -ENODEV;
rc = (chip->flags & TPM_CHIP_FLAG_TPM2) != 0;
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_is_tpm2);
/**
* tpm_pcr_read - read a pcr value
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
* @chip_num: tpm idx # or ANY
* @pcr_idx: pcr idx to retrieve
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
* @res_buf: TPM_PCR value
* size of res_buf is 20 bytes (or NULL if you don't care)
*
* The TPM driver should be built-in, but for whatever reason it
* isn't, protect against the chip disappearing, by incrementing
* the module usage count.
*/
int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf)
{
struct tpm_chip *chip;
int rc;
chip = tpm_chip_find_get(chip_num);
if (chip == NULL)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
rc = tpm2_pcr_read(chip, pcr_idx, res_buf);
else
rc = tpm_pcr_read_dev(chip, pcr_idx, res_buf);
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_pcr_read);
/**
* tpm_pcr_extend - extend pcr value with hash
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
* @chip_num: tpm idx # or AN&
* @pcr_idx: pcr idx to extend
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
* @hash: hash value used to extend pcr value
*
* The TPM driver should be built-in, but for whatever reason it
* isn't, protect against the chip disappearing, by incrementing
* the module usage count.
*/
#define TPM_ORD_PCR_EXTEND cpu_to_be32(20)
#define EXTEND_PCR_RESULT_SIZE 34
static const struct tpm_input_header pcrextend_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(34),
.ordinal = TPM_ORD_PCR_EXTEND
};
int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash)
{
struct tpm_cmd_t cmd;
int rc;
struct tpm_chip *chip;
chip = tpm_chip_find_get(chip_num);
if (chip == NULL)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
rc = tpm2_pcr_extend(chip, pcr_idx, hash);
tpm_put_ops(chip);
return rc;
}
cmd.header.in = pcrextend_header;
cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(pcr_idx);
memcpy(cmd.params.pcrextend_in.hash, hash, TPM_DIGEST_SIZE);
rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE, 0,
"attempting extend a PCR value");
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_pcr_extend);
/**
* tpm_do_selftest - have the TPM continue its selftest and wait until it
* can receive further commands
* @chip: TPM chip to use
*
* Returns 0 on success, < 0 in case of fatal error or a value > 0 representing
* a TPM error code.
*/
int tpm_do_selftest(struct tpm_chip *chip)
{
int rc;
unsigned int loops;
TPM: Work around buggy TPMs that block during continue self test We've been testing an alternative TPM for our embedded products and found random kernel boot failures due to time outs after the continue self test command. This was happening randomly, and has been *very* hard to track down, but it looks like with this chip there is some kind of race with the tpm_tis_status() check of TPM_STS_COMMAND_READY. If things get there 'too fast' then it sees the chip is ready, or tpm_tis_ready() works. Otherwise it takes somewhere over 400ms before the chip will return TPM_STS_COMMAND_READY. Adding some delay after tpm_continue_selftest() makes things reliably hit the failure path, otherwise it is a crapshot. The spec says it should be returning TPM_WARN_DOING_SELFTEST, not holding off on ready.. Boot log during this event looks like this: tpm_tis 70030000.tpm_tis: 1.2 TPM (device-id 0x3204, rev-id 64) tpm_tis 70030000.tpm_tis: Issuing TPM_STARTUP tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test The other TPM vendor we use doesn't show this wonky behaviour: tpm_tis 70030000.tpm_tis: 1.2 TPM (device-id 0xFE, rev-id 70) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2012-11-22 05:15:54 +08:00
unsigned int delay_msec = 100;
unsigned long duration;
u8 dummy[TPM_DIGEST_SIZE];
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
duration = tpm_calc_ordinal_duration(chip, TPM_ORD_CONTINUE_SELFTEST);
loops = jiffies_to_msecs(duration) / delay_msec;
rc = tpm_continue_selftest(chip);
/* This may fail if there was no TPM driver during a suspend/resume
* cycle; some may return 10 (BAD_ORDINAL), others 28 (FAILEDSELFTEST)
*/
if (rc)
return rc;
do {
/* Attempt to read a PCR value */
rc = tpm_pcr_read_dev(chip, 0, dummy);
TPM: Work around buggy TPMs that block during continue self test We've been testing an alternative TPM for our embedded products and found random kernel boot failures due to time outs after the continue self test command. This was happening randomly, and has been *very* hard to track down, but it looks like with this chip there is some kind of race with the tpm_tis_status() check of TPM_STS_COMMAND_READY. If things get there 'too fast' then it sees the chip is ready, or tpm_tis_ready() works. Otherwise it takes somewhere over 400ms before the chip will return TPM_STS_COMMAND_READY. Adding some delay after tpm_continue_selftest() makes things reliably hit the failure path, otherwise it is a crapshot. The spec says it should be returning TPM_WARN_DOING_SELFTEST, not holding off on ready.. Boot log during this event looks like this: tpm_tis 70030000.tpm_tis: 1.2 TPM (device-id 0x3204, rev-id 64) tpm_tis 70030000.tpm_tis: Issuing TPM_STARTUP tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test The other TPM vendor we use doesn't show this wonky behaviour: tpm_tis 70030000.tpm_tis: 1.2 TPM (device-id 0xFE, rev-id 70) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2012-11-22 05:15:54 +08:00
/* Some buggy TPMs will not respond to tpm_tis_ready() for
* around 300ms while the self test is ongoing, keep trying
* until the self test duration expires. */
if (rc == -ETIME) {
dev_info(
&chip->dev, HW_ERR
"TPM command timed out during continue self test");
TPM: Work around buggy TPMs that block during continue self test We've been testing an alternative TPM for our embedded products and found random kernel boot failures due to time outs after the continue self test command. This was happening randomly, and has been *very* hard to track down, but it looks like with this chip there is some kind of race with the tpm_tis_status() check of TPM_STS_COMMAND_READY. If things get there 'too fast' then it sees the chip is ready, or tpm_tis_ready() works. Otherwise it takes somewhere over 400ms before the chip will return TPM_STS_COMMAND_READY. Adding some delay after tpm_continue_selftest() makes things reliably hit the failure path, otherwise it is a crapshot. The spec says it should be returning TPM_WARN_DOING_SELFTEST, not holding off on ready.. Boot log during this event looks like this: tpm_tis 70030000.tpm_tis: 1.2 TPM (device-id 0x3204, rev-id 64) tpm_tis 70030000.tpm_tis: Issuing TPM_STARTUP tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test The other TPM vendor we use doesn't show this wonky behaviour: tpm_tis 70030000.tpm_tis: 1.2 TPM (device-id 0xFE, rev-id 70) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2012-11-22 05:15:54 +08:00
msleep(delay_msec);
continue;
}
if (rc == TPM_ERR_DISABLED || rc == TPM_ERR_DEACTIVATED) {
dev_info(&chip->dev,
"TPM is disabled/deactivated (0x%X)\n", rc);
/* TPM is disabled and/or deactivated; driver can
* proceed and TPM does handle commands for
* suspend/resume correctly
*/
return 0;
}
if (rc != TPM_WARN_DOING_SELFTEST)
return rc;
msleep(delay_msec);
} while (--loops > 0);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_do_selftest);
/**
* tpm1_auto_startup - Perform the standard automatic TPM initialization
* sequence
* @chip: TPM chip to use
*
* Returns 0 on success, < 0 in case of fatal error.
*/
int tpm1_auto_startup(struct tpm_chip *chip)
{
int rc;
rc = tpm_get_timeouts(chip);
if (rc)
goto out;
rc = tpm_do_selftest(chip);
if (rc) {
dev_err(&chip->dev, "TPM self test failed\n");
goto out;
}
return rc;
out:
if (rc > 0)
rc = -ENODEV;
return rc;
}
int tpm_send(u32 chip_num, void *cmd, size_t buflen)
{
struct tpm_chip *chip;
int rc;
chip = tpm_chip_find_get(chip_num);
if (chip == NULL)
return -ENODEV;
rc = tpm_transmit_cmd(chip, cmd, buflen, 0, "attempting tpm_cmd");
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_send);
tpm: cleanup checkpatch warnings before we rename the file it might be a good idea to cleanup the long persisting checkpatch warnings. Since everything is really trivial, splitting the patch up would only result in noise. For the interested reader - here the checkpatch warnings: (regrouped for easer readability) ERROR: trailing whitespace + * Specifications at www.trustedcomputinggroup.org^I $ + * $ +^I/* $ +^I parameters (RSA 12->bytes: keybit, #primes, expbit) $ WARNING: unnecessary whitespace before a quoted newline + "invalid count value %x %zx \n", count, bufsiz); ERROR: do not use assignment in if condition + if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { ERROR: space required after that ',' (ctx:VxV) + len = tpm_transmit(chip,(u8 *) cmd, len); ^ ERROR: "foo * bar" should be "foo *bar" +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr, +ssize_t tpm_show_temp_deactivated(struct device * dev, + struct device_attribute * attr, char *buf) WARNING: please, no space before tabs + * @chip_num: ^Itpm idx # or ANY$ + * @res_buf: ^ITPM_PCR value$ + * ^I^Isize of res_buf is 20 bytes (or NULL if you don't care)$ + * @chip_num: ^Itpm idx # or AN&$ + * @hash: ^Ihash value used to extend pcr value$ ERROR: code indent should use tabs where possible +^I TPM_ORD_CONTINUE_SELFTEST);$ WARNING: line over 80 characters +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, ERROR: trailing whitespace + * Called from tpm_<specific>.c probe function only for devices $ total: 16 errors, 7 warnings, 1554 lines checked Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2013-10-22 06:29:14 +08:00
static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
bool check_cancel, bool *canceled)
{
u8 status = chip->ops->status(chip);
*canceled = false;
if ((status & mask) == mask)
return true;
if (check_cancel && chip->ops->req_canceled(chip, status)) {
*canceled = true;
return true;
}
return false;
}
int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
wait_queue_head_t *queue, bool check_cancel)
{
unsigned long stop;
long rc;
u8 status;
bool canceled = false;
/* check current status */
status = chip->ops->status(chip);
if ((status & mask) == mask)
return 0;
stop = jiffies + timeout;
if (chip->flags & TPM_CHIP_FLAG_IRQ) {
again:
timeout = stop - jiffies;
if ((long)timeout <= 0)
return -ETIME;
rc = wait_event_interruptible_timeout(*queue,
wait_for_tpm_stat_cond(chip, mask, check_cancel,
&canceled),
timeout);
if (rc > 0) {
if (canceled)
return -ECANCELED;
return 0;
}
if (rc == -ERESTARTSYS && freezing(current)) {
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
} else {
do {
msleep(TPM_TIMEOUT);
status = chip->ops->status(chip);
if ((status & mask) == mask)
return 0;
} while (time_before(jiffies, stop));
}
return -ETIME;
}
EXPORT_SYMBOL_GPL(wait_for_tpm_stat);
#define TPM_ORD_SAVESTATE cpu_to_be32(152)
#define SAVESTATE_RESULT_SIZE 10
static const struct tpm_input_header savestate_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(10),
.ordinal = TPM_ORD_SAVESTATE
};
/*
* We are about to suspend. Save the TPM state
* so that it can be restored.
*/
int tpm_pm_suspend(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
struct tpm_cmd_t cmd;
TPM: Retry SaveState command in suspend path If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-03-18 05:56:39 +08:00
int rc, try;
u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
if (chip == NULL)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
tpm2_shutdown(chip, TPM2_SU_STATE);
return 0;
}
/* for buggy tpm, flush pcrs with extend to selected dummy */
if (tpm_suspend_pcr) {
cmd.header.in = pcrextend_header;
cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(tpm_suspend_pcr);
memcpy(cmd.params.pcrextend_in.hash, dummy_hash,
TPM_DIGEST_SIZE);
rc = tpm_transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE, 0,
"extending dummy pcr before suspend");
}
/* now do the actual savestate */
TPM: Retry SaveState command in suspend path If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-03-18 05:56:39 +08:00
for (try = 0; try < TPM_RETRY; try++) {
cmd.header.in = savestate_header;
rc = tpm_transmit_cmd(chip, &cmd, SAVESTATE_RESULT_SIZE, 0,
NULL);
TPM: Retry SaveState command in suspend path If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-03-18 05:56:39 +08:00
/*
* If the TPM indicates that it is too busy to respond to
* this command then retry before giving up. It can take
* several seconds for this TPM to be ready.
*
* This can happen if the TPM has already been sent the
* SaveState command before the driver has loaded. TCG 1.2
* specification states that any communication after SaveState
* may cause the TPM to invalidate previously saved state.
*/
if (rc != TPM_WARN_RETRY)
break;
msleep(TPM_TIMEOUT_RETRY);
}
if (rc)
dev_err(&chip->dev,
TPM: Retry SaveState command in suspend path If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-03-18 05:56:39 +08:00
"Error (%d) sending savestate before suspend\n", rc);
else if (try > 0)
dev_warn(&chip->dev, "TPM savestate took %dms\n",
TPM: Retry SaveState command in suspend path If the TPM has already been sent a SaveState command before the driver is loaded it may have problems sending that same command again later. This issue is seen with the Chromebook Pixel due to a firmware bug in the legacy mode boot path which is sending the SaveState command before booting the kernel. More information is available at http://crbug.com/203524 This change introduces a retry of the SaveState command in the suspend path in order to work around this issue. A future firmware update should fix this but this is also a trivial workaround in the driver that has no effect on systems that do not show this problem. When this does happen the TPM responds with a non-fatal TPM_RETRY code that is defined in the specification: The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. The TPM MAY return TPM_RETRY for any command at any time. It can take several seconds before the TPM will respond again. I measured a typical time between 3 and 4 seconds and the timeout is set at a safe 5 seconds. It is also possible to reproduce this with commands via /dev/tpm0. The bug linked above has a python script attached which can be used to test for this problem. I tested a variety of TPMs from Infineon, Nuvoton, Atmel, and STMicro but was only able to reproduce this with LPC and I2C TPMs from Infineon. The TPM specification only loosely defines this behavior: TPM Main Level 2 Part 3 v1.2 r116, section 3.3. TPM_SaveState: The TPM MAY declare all preserved values invalid in response to any command other than TPM_Init. TCG PC Client BIOS Spec 1.21 section 8.3.1. After issuing a TPM_SaveState command, the OS SHOULD NOT issue TPM commands before transitioning to S3 without issuing another TPM_SaveState command. TCG PC Client TIS 1.21, section 4. Power Management: The TPM_SaveState command allows a Static OS to indicate to the TPM that the platform may enter a low power state where the TPM will be required to enter into the D3 power state. The use of the term "may" is significant in that there is no requirement for the platform to actually enter the low power state after sending the TPM_SaveState command. The software may, in fact, send subsequent commands after sending the TPM_SaveState command. Change-Id: I52b41e826412688e5b6c8ddd3bb16409939704e9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-03-18 05:56:39 +08:00
try * TPM_TIMEOUT_RETRY);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_pm_suspend);
/*
* Resume from a power safe. The BIOS already restored
* the TPM state.
*/
int tpm_pm_resume(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL)
return -ENODEV;
return 0;
}
EXPORT_SYMBOL_GPL(tpm_pm_resume);
#define TPM_GETRANDOM_RESULT_SIZE 18
static const struct tpm_input_header tpm_getrandom_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(14),
.ordinal = TPM_ORD_GET_RANDOM
};
/**
* tpm_get_random() - Get random bytes from the tpm's RNG
* @chip_num: A specific chip number for the request or TPM_ANY_NUM
* @out: destination buffer for the random bytes
* @max: the max number of bytes to write to @out
*
* Returns < 0 on error and the number of bytes read on success
*/
int tpm_get_random(u32 chip_num, u8 *out, size_t max)
{
struct tpm_chip *chip;
struct tpm_cmd_t tpm_cmd;
u32 recd, num_bytes = min_t(u32, max, TPM_MAX_RNG_DATA);
int err, total = 0, retries = 5;
u8 *dest = out;
if (!out || !num_bytes || max > TPM_MAX_RNG_DATA)
return -EINVAL;
chip = tpm_chip_find_get(chip_num);
if (chip == NULL)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
err = tpm2_get_random(chip, out, max);
tpm_put_ops(chip);
return err;
}
do {
tpm_cmd.header.in = tpm_getrandom_header;
tpm_cmd.params.getrandom_in.num_bytes = cpu_to_be32(num_bytes);
err = tpm_transmit_cmd(chip, &tpm_cmd,
TPM_GETRANDOM_RESULT_SIZE + num_bytes,
0, "attempting get random");
if (err)
break;
recd = be32_to_cpu(tpm_cmd.params.getrandom_out.rng_data_len);
memcpy(dest, tpm_cmd.params.getrandom_out.rng_data, recd);
dest += recd;
total += recd;
num_bytes -= recd;
} while (retries-- && total < max);
tpm_put_ops(chip);
return total ? total : -EIO;
}
EXPORT_SYMBOL_GPL(tpm_get_random);
/**
* tpm_seal_trusted() - seal a trusted key
* @chip_num: A specific chip number for the request or TPM_ANY_NUM
* @options: authentication values and other options
* @payload: the key data in clear and encrypted form
*
* Returns < 0 on error and 0 on success. At the moment, only TPM 2.0 chips
* are supported.
*/
int tpm_seal_trusted(u32 chip_num, struct trusted_key_payload *payload,
struct trusted_key_options *options)
{
struct tpm_chip *chip;
int rc;
chip = tpm_chip_find_get(chip_num);
if (chip == NULL || !(chip->flags & TPM_CHIP_FLAG_TPM2))
return -ENODEV;
rc = tpm2_seal_trusted(chip, payload, options);
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_seal_trusted);
/**
* tpm_unseal_trusted() - unseal a trusted key
* @chip_num: A specific chip number for the request or TPM_ANY_NUM
* @options: authentication values and other options
* @payload: the key data in clear and encrypted form
*
* Returns < 0 on error and 0 on success. At the moment, only TPM 2.0 chips
* are supported.
*/
int tpm_unseal_trusted(u32 chip_num, struct trusted_key_payload *payload,
struct trusted_key_options *options)
{
struct tpm_chip *chip;
int rc;
chip = tpm_chip_find_get(chip_num);
if (chip == NULL || !(chip->flags & TPM_CHIP_FLAG_TPM2))
return -ENODEV;
rc = tpm2_unseal_trusted(chip, payload, options);
tpm_put_ops(chip);
return rc;
}
EXPORT_SYMBOL_GPL(tpm_unseal_trusted);
static int __init tpm_init(void)
{
int rc;
tpm_class = class_create(THIS_MODULE, "tpm");
if (IS_ERR(tpm_class)) {
pr_err("couldn't create tpm class\n");
return PTR_ERR(tpm_class);
}
rc = alloc_chrdev_region(&tpm_devt, 0, TPM_NUM_DEVICES, "tpm");
if (rc < 0) {
pr_err("tpm: failed to allocate char dev region\n");
class_destroy(tpm_class);
return rc;
}
return 0;
}
static void __exit tpm_exit(void)
{
idr_destroy(&dev_nums_idr);
class_destroy(tpm_class);
unregister_chrdev_region(tpm_devt, TPM_NUM_DEVICES);
}
subsys_initcall(tpm_init);
module_exit(tpm_exit);
MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
MODULE_DESCRIPTION("TPM Driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");