OpenCloudOS-Kernel/drivers/scsi/qla2xxx/qla_gbl.h

981 lines
40 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*/
#ifndef __QLA_GBL_H
#define __QLA_GBL_H
#include <linux/interrupt.h>
/*
* Global Function Prototypes in qla_init.c source file.
*/
extern int qla2x00_initialize_adapter(scsi_qla_host_t *);
extern int qla2100_pci_config(struct scsi_qla_host *);
extern int qla2300_pci_config(struct scsi_qla_host *);
extern int qla24xx_pci_config(scsi_qla_host_t *);
extern int qla25xx_pci_config(scsi_qla_host_t *);
extern int qla2x00_reset_chip(struct scsi_qla_host *);
extern int qla24xx_reset_chip(struct scsi_qla_host *);
extern int qla2x00_chip_diag(struct scsi_qla_host *);
extern int qla24xx_chip_diag(struct scsi_qla_host *);
extern void qla2x00_config_rings(struct scsi_qla_host *);
extern void qla24xx_config_rings(struct scsi_qla_host *);
extern int qla2x00_reset_adapter(struct scsi_qla_host *);
extern int qla24xx_reset_adapter(struct scsi_qla_host *);
extern int qla2x00_nvram_config(struct scsi_qla_host *);
extern int qla24xx_nvram_config(struct scsi_qla_host *);
extern int qla81xx_nvram_config(struct scsi_qla_host *);
extern void qla2x00_update_fw_options(struct scsi_qla_host *);
extern void qla24xx_update_fw_options(scsi_qla_host_t *);
extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
extern int qla2x00_perform_loop_resync(scsi_qla_host_t *);
extern int qla2x00_loop_resync(scsi_qla_host_t *);
extern void qla2x00_clear_loop_id(fc_port_t *fcport);
extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
extern int qla24xx_els_dcmd_iocb(scsi_qla_host_t *, int, port_id_t);
extern int qla24xx_els_dcmd2_iocb(scsi_qla_host_t *, int, fc_port_t *, bool);
extern void qla2x00_els_dcmd2_free(scsi_qla_host_t *vha,
struct els_plogi *els_plogi);
extern void qla2x00_update_fcports(scsi_qla_host_t *);
extern int qla2x00_abort_isp(scsi_qla_host_t *);
extern void qla2x00_abort_isp_cleanup(scsi_qla_host_t *);
extern void qla2x00_quiesce_io(scsi_qla_host_t *);
extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
void qla_register_fcport_fn(struct work_struct *);
extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *);
extern void qla84xx_put_chip(struct scsi_qla_host *);
extern int qla2x00_async_login(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
extern int qla2x00_async_logout(struct scsi_qla_host *, fc_port_t *);
extern int qla2x00_async_prlo(struct scsi_qla_host *, fc_port_t *);
extern int qla2x00_async_adisc(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
extern int qla2x00_async_tm_cmd(fc_port_t *, uint32_t, uint32_t, uint32_t);
extern void qla2x00_async_login_done(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
struct qla_work_evt *qla2x00_alloc_work(struct scsi_qla_host *,
enum qla_work_type);
extern int qla24xx_async_gnl(struct scsi_qla_host *, fc_port_t *);
int qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e);
extern void *qla2x00_alloc_iocbs_ready(struct qla_qpair *, srb_t *);
extern int qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *, fc_port_t *);
extern int qla24xx_async_abort_cmd(srb_t *, bool);
extern void qla2x00_set_fcport_state(fc_port_t *fcport, int state);
extern fc_port_t *
qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t );
extern int __qla83xx_set_idc_control(scsi_qla_host_t *, uint32_t);
extern int __qla83xx_get_idc_control(scsi_qla_host_t *, uint32_t *);
extern void qla83xx_idc_audit(scsi_qla_host_t *, int);
extern int qla83xx_nic_core_reset(scsi_qla_host_t *);
extern void qla83xx_reset_ownership(scsi_qla_host_t *);
extern int qla2xxx_mctp_dump(scsi_qla_host_t *);
extern int
qla2x00_alloc_outstanding_cmds(struct qla_hw_data *, struct req_que *);
extern int qla2x00_init_rings(scsi_qla_host_t *);
extern struct qla_qpair *qla2xxx_create_qpair(struct scsi_qla_host *,
int, int, bool);
extern int qla2xxx_delete_qpair(struct scsi_qla_host *, struct qla_qpair *);
void qla2x00_handle_rscn(scsi_qla_host_t *vha, struct event_arg *ea);
void qla24xx_handle_plogi_done_event(struct scsi_qla_host *vha,
struct event_arg *ea);
void qla24xx_handle_relogin_event(scsi_qla_host_t *vha,
struct event_arg *ea);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
int qla24xx_async_gpdb(struct scsi_qla_host *, fc_port_t *, u8);
int qla24xx_async_prli(struct scsi_qla_host *, fc_port_t *);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
int qla24xx_async_notify_ack(scsi_qla_host_t *, fc_port_t *,
struct imm_ntfy_from_isp *, int);
int qla24xx_post_newsess_work(struct scsi_qla_host *, port_id_t *, u8 *, u8*,
void *, u8);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
int qla24xx_fcport_handle_login(struct scsi_qla_host *, fc_port_t *);
int qla24xx_detect_sfp(scsi_qla_host_t *);
int qla24xx_post_gpdb_work(struct scsi_qla_host *, fc_port_t *, u8);
extern void qla28xx_get_aux_images(struct scsi_qla_host *,
struct active_regions *);
extern void qla27xx_get_active_image(struct scsi_qla_host *,
struct active_regions *);
void qla2x00_async_prlo_done(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
extern int qla2x00_post_async_prlo_work(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
extern int qla2x00_post_async_prlo_done_work(struct scsi_qla_host *,
fc_port_t *, uint16_t *);
int qla_post_iidma_work(struct scsi_qla_host *vha, fc_port_t *fcport);
void qla_do_iidma_work(struct scsi_qla_host *vha, fc_port_t *fcport);
int qla2x00_reserve_mgmt_server_loop_id(scsi_qla_host_t *);
void qla_rscn_replay(fc_port_t *fcport);
void qla24xx_free_purex_item(struct purex_item *item);
extern bool qla24xx_risc_firmware_invalid(uint32_t *);
void qla_init_iocb_limit(scsi_qla_host_t *);
/*
* Global Data in qla_os.c source file.
*/
extern char qla2x00_version_str[];
extern struct kmem_cache *srb_cachep;
extern struct kmem_cache *qla_tgt_plogi_cachep;
extern int ql2xlogintimeout;
extern int qlport_down_retry;
extern int ql2xplogiabsentdevice;
extern int ql2xloginretrycount;
extern int ql2xfdmienable;
extern int ql2xrdpenable;
extern int ql2xsmartsan;
extern int ql2xallocfwdump;
extern int ql2xextended_error_logging;
extern int ql2xiidmaenable;
extern int ql2xmqsupport;
extern int ql2xfwloadbin;
extern int ql2xetsenable;
extern int ql2xshiftctondsd;
extern int ql2xdbwr;
extern int ql2xasynctmfenable;
extern int ql2xgffidenable;
extern int ql2xenabledif;
extern int ql2xenablehba_err_chk;
extern int ql2xtargetreset;
extern int ql2xdontresethba;
extern uint64_t ql2xmaxlun;
extern int ql2xmdcapmask;
extern int ql2xmdenable;
extern int ql2xexlogins;
extern int ql2xexchoffld;
extern int ql2xiniexchg;
extern int ql2xfwholdabts;
extern int ql2xmvasynctoatio;
extern int ql2xuctrlirq;
extern int ql2xnvmeenable;
extern int ql2xautodetectsfp;
extern int ql2xenablemsix;
extern int qla2xuseresexchforels;
extern int ql2xexlogins;
extern int ql2xdifbundlinginternalbuffers;
extern int ql2xfulldump_on_mpifail;
extern int ql2xenforce_iocb_limit;
extern int ql2xabts_wait_nvme;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum
fc_host_event_code, u32);
extern int qla2x00_post_idc_ack_work(struct scsi_qla_host *, uint16_t *);
extern int qla2x00_post_async_login_work(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
extern int qla2x00_post_async_logout_work(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
extern int qla2x00_post_async_adisc_work(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
extern int qla2x00_post_async_adisc_done_work(struct scsi_qla_host *,
fc_port_t *, uint16_t *);
extern int qla2x00_set_exlogins_buffer(struct scsi_qla_host *);
extern void qla2x00_free_exlogin_buffer(struct qla_hw_data *);
extern int qla2x00_set_exchoffld_buffer(struct scsi_qla_host *);
extern void qla2x00_free_exchoffld_buffer(struct qla_hw_data *);
extern int qla81xx_restart_mpi_firmware(scsi_qla_host_t *);
extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *,
struct qla_hw_data *);
extern void qla2x00_free_host(struct scsi_qla_host *);
extern void qla2x00_relogin(struct scsi_qla_host *);
extern void qla2x00_do_work(struct scsi_qla_host *);
extern void qla2x00_free_fcports(struct scsi_qla_host *);
extern void qla2x00_free_fcport(fc_port_t *);
extern void qla83xx_schedule_work(scsi_qla_host_t *, int);
extern void qla83xx_service_idc_aen(struct work_struct *);
extern void qla83xx_nic_core_unrecoverable_work(struct work_struct *);
extern void qla83xx_idc_state_handler_work(struct work_struct *);
extern void qla83xx_nic_core_reset_work(struct work_struct *);
extern void qla83xx_idc_lock(scsi_qla_host_t *, uint16_t);
extern void qla83xx_idc_unlock(scsi_qla_host_t *, uint16_t);
extern int qla83xx_idc_state_handler(scsi_qla_host_t *);
extern int qla83xx_set_drv_presence(scsi_qla_host_t *vha);
extern int __qla83xx_set_drv_presence(scsi_qla_host_t *vha);
extern int qla83xx_clear_drv_presence(scsi_qla_host_t *vha);
extern int __qla83xx_clear_drv_presence(scsi_qla_host_t *vha);
extern int qla2x00_post_uevent_work(struct scsi_qla_host *, u32);
extern int qla2x00_post_uevent_work(struct scsi_qla_host *, u32);
extern void qla2x00_disable_board_on_pci_error(struct work_struct *);
scsi: qla2xxx: Fix crash in PCIe error handling BUG: unable to handle kernel NULL pointer dereference at (null) IP: qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1715 Comm: kworker/0:2 Tainted: GOE 4.12.14-122.37-default #1 SLE12-SP5 Hardware name: HPE Superdome Flex/Superdome Flex, BIOS Bundle:3.30.100 SFW:IP147.007.004.017.000.2009211957 09/21/2020 Workqueue: events aer_recover_work_func task: ffff9e399c14ca80 task.stack: ffffc1c58e4ac000 RIP: 0010:qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] RSP: 0018:ffffc1c58e4afd50 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9e419cdef480 RCX: 0000000000000000 RDX: ffff9e399c14ca80 RSI: 0000000000000246 RDI: ffff9e419bbc27b8 RBP: ffff9e419bbc27b8 R08: 0000000000000004 R09: 00000000a0440000 R10: 0000000000000000 R11: ffff9e399416d1a0 R12: ffff9e419cdef000 R13: ffff9e3a7cfae800 R14: ffff9e3a7cfae800 R15: 00000000000000c0 FS: 0000000000000000(0000) GS:ffff9e39a0000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006cd00a005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: qla2xxx_pci_slot_reset+0x141/0x160 [qla2xxx] report_slot_reset+0x41/0x80 ? merge_result.part.4+0x30/0x30 pci_walk_bus+0x70/0x90 pcie_do_recovery+0x1db/0x2e0 aer_recover_work_func+0xc2/0xf0 process_one_work+0x14c/0x390 Disable board_disable logic where driver resources are freed while OS is in the process of recovering the adapter. Link: https://lore.kernel.org/r/20210329085229.4367-9-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29 16:52:25 +08:00
extern void qla_eeh_work(struct work_struct *);
extern void qla2x00_sp_compl(srb_t *sp, int);
extern void qla2xxx_qpair_sp_free_dma(srb_t *sp);
extern void qla2xxx_qpair_sp_compl(srb_t *sp, int);
extern void qla24xx_sched_upd_fcport(fc_port_t *);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
void qla2x00_handle_login_done_event(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
int qla24xx_post_gnl_work(struct scsi_qla_host *, fc_port_t *);
int qla24xx_post_relogin_work(struct scsi_qla_host *vha);
void qla2x00_wait_for_sess_deletion(scsi_qla_host_t *);
void qla24xx_process_purex_rdp(struct scsi_qla_host *vha,
struct purex_item *pkt);
scsi: qla2xxx: Fix crash in PCIe error handling BUG: unable to handle kernel NULL pointer dereference at (null) IP: qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1715 Comm: kworker/0:2 Tainted: GOE 4.12.14-122.37-default #1 SLE12-SP5 Hardware name: HPE Superdome Flex/Superdome Flex, BIOS Bundle:3.30.100 SFW:IP147.007.004.017.000.2009211957 09/21/2020 Workqueue: events aer_recover_work_func task: ffff9e399c14ca80 task.stack: ffffc1c58e4ac000 RIP: 0010:qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] RSP: 0018:ffffc1c58e4afd50 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9e419cdef480 RCX: 0000000000000000 RDX: ffff9e399c14ca80 RSI: 0000000000000246 RDI: ffff9e419bbc27b8 RBP: ffff9e419bbc27b8 R08: 0000000000000004 R09: 00000000a0440000 R10: 0000000000000000 R11: ffff9e399416d1a0 R12: ffff9e419cdef000 R13: ffff9e3a7cfae800 R14: ffff9e3a7cfae800 R15: 00000000000000c0 FS: 0000000000000000(0000) GS:ffff9e39a0000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006cd00a005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: qla2xxx_pci_slot_reset+0x141/0x160 [qla2xxx] report_slot_reset+0x41/0x80 ? merge_result.part.4+0x30/0x30 pci_walk_bus+0x70/0x90 pcie_do_recovery+0x1db/0x2e0 aer_recover_work_func+0xc2/0xf0 process_one_work+0x14c/0x390 Disable board_disable logic where driver resources are freed while OS is in the process of recovering the adapter. Link: https://lore.kernel.org/r/20210329085229.4367-9-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29 16:52:25 +08:00
void qla_pci_set_eeh_busy(struct scsi_qla_host *);
void qla_schedule_eeh_work(struct scsi_qla_host *);
/*
* Global Functions in qla_mid.c source file.
*/
extern struct scsi_host_template qla2xxx_driver_template;
extern struct scsi_transport_template *qla2xxx_transport_vport_template;
extern void qla2x00_timer(struct timer_list *);
extern void qla2x00_start_timer(scsi_qla_host_t *, unsigned long);
extern void qla24xx_deallocate_vp_id(scsi_qla_host_t *);
extern int qla24xx_disable_vp (scsi_qla_host_t *);
extern int qla24xx_enable_vp (scsi_qla_host_t *);
extern int qla24xx_control_vp(scsi_qla_host_t *, int );
extern int qla24xx_modify_vp_config(scsi_qla_host_t *);
extern int qla2x00_send_change_request(scsi_qla_host_t *, uint16_t, uint16_t);
extern void qla2x00_vp_stop_timer(scsi_qla_host_t *);
extern int qla24xx_configure_vhba (scsi_qla_host_t *);
extern void qla24xx_report_id_acquisition(scsi_qla_host_t *,
struct vp_rpt_id_entry_24xx *);
extern void qla2x00_do_dpc_all_vps(scsi_qla_host_t *);
extern int qla24xx_vport_create_req_sanity_check(struct fc_vport *);
extern scsi_qla_host_t *qla24xx_create_vhost(struct fc_vport *);
extern void qla2x00_sp_free_dma(srb_t *sp);
extern char *qla2x00_get_fw_version_str(struct scsi_qla_host *, char *);
extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int);
extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *);
extern int qla24xx_async_abort_cmd(srb_t *, bool);
extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *);
extern int qla2x00_wait_for_hba_online(scsi_qla_host_t *);
extern int qla2x00_wait_for_chip_reset(scsi_qla_host_t *);
extern int qla2x00_wait_for_fcoe_ctx_reset(scsi_qla_host_t *);
extern void qla2xxx_wake_dpc(struct scsi_qla_host *);
extern void qla2x00_alert_all_vps(struct rsp_que *, uint16_t *);
extern void qla2x00_async_event(scsi_qla_host_t *, struct rsp_que *,
uint16_t *);
extern int qla2x00_vp_abort_isp(scsi_qla_host_t *);
/*
* Global Function Prototypes in qla_iocb.c source file.
*/
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:28 +08:00
extern uint16_t qla2x00_calc_iocbs_32(uint16_t);
extern uint16_t qla2x00_calc_iocbs_64(uint16_t);
extern void qla2x00_build_scsi_iocbs_32(srb_t *, cmd_entry_t *, uint16_t);
extern void qla2x00_build_scsi_iocbs_64(srb_t *, cmd_entry_t *, uint16_t);
extern void qla24xx_build_scsi_iocbs(srb_t *, struct cmd_type_7 *,
uint16_t, struct req_que *);
extern uint32_t qla2xxx_get_next_handle(struct req_que *req);
extern int qla2x00_start_scsi(srb_t *sp);
extern int qla24xx_start_scsi(srb_t *sp);
int qla2x00_marker(struct scsi_qla_host *, struct qla_qpair *,
uint16_t, uint64_t, uint8_t);
extern int qla2x00_start_sp(srb_t *);
extern int qla24xx_dif_start_scsi(srb_t *);
extern int qla2x00_start_bidir(srb_t *, struct scsi_qla_host *, uint32_t);
extern int qla2xxx_dif_start_scsi_mq(srb_t *);
extern void qla2x00_init_timer(srb_t *sp, unsigned long tmo);
extern unsigned long qla2x00_get_async_timeout(struct scsi_qla_host *);
extern void *qla2x00_alloc_iocbs(struct scsi_qla_host *, srb_t *);
extern void *__qla2x00_alloc_iocbs(struct qla_qpair *, srb_t *);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:28 +08:00
extern int qla2x00_issue_marker(scsi_qla_host_t *, int);
extern int qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *, srb_t *,
struct dsd64 *, uint16_t, struct qla_tc_param *);
extern int qla24xx_walk_and_build_sglist(struct qla_hw_data *, srb_t *,
struct dsd64 *, uint16_t, struct qla_tc_param *);
extern int qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *, srb_t *,
struct dsd64 *, uint16_t, struct qla_tgt_cmd *);
extern int qla24xx_get_one_block_sg(uint32_t, struct qla2_sgx *, uint32_t *);
extern int qla24xx_configure_prot_mode(srb_t *, uint16_t *);
/*
* Global Function Prototypes in qla_mbx.c source file.
*/
extern int
qla2x00_load_ram(scsi_qla_host_t *, dma_addr_t, uint32_t, uint32_t);
extern int
qla2x00_dump_ram(scsi_qla_host_t *, dma_addr_t, uint32_t, uint32_t);
extern int
qla2x00_execute_fw(scsi_qla_host_t *, uint32_t);
extern int
qla2x00_get_fw_version(scsi_qla_host_t *);
extern int
qla2x00_get_fw_options(scsi_qla_host_t *, uint16_t *);
extern int
qla2x00_set_fw_options(scsi_qla_host_t *, uint16_t *);
extern int
qla2x00_mbx_reg_test(scsi_qla_host_t *);
extern int
qla2x00_verify_checksum(scsi_qla_host_t *, uint32_t);
extern int
qla2x00_issue_iocb(scsi_qla_host_t *, void *, dma_addr_t, size_t);
extern int
qla2x00_abort_command(srb_t *);
extern int
qla2x00_abort_target(struct fc_port *, uint64_t, int);
extern int
qla2x00_lun_reset(struct fc_port *, uint64_t, int);
extern int
qla2x00_get_adapter_id(scsi_qla_host_t *, uint16_t *, uint8_t *, uint8_t *,
uint8_t *, uint16_t *, uint16_t *);
extern int
qla2x00_get_retry_cnt(scsi_qla_host_t *, uint8_t *, uint8_t *, uint16_t *);
extern int
qla2x00_init_firmware(scsi_qla_host_t *, uint16_t);
extern int
qla2x00_get_port_database(scsi_qla_host_t *, fc_port_t *, uint8_t);
extern int
qla24xx_get_port_database(scsi_qla_host_t *, u16, struct port_database_24xx *);
extern int
qla2x00_get_firmware_state(scsi_qla_host_t *, uint16_t *);
extern int
qla2x00_get_port_name(scsi_qla_host_t *, uint16_t, uint8_t *, uint8_t);
extern int
qla24xx_link_initialize(scsi_qla_host_t *);
extern int
qla2x00_lip_reset(scsi_qla_host_t *);
extern int
qla2x00_send_sns(scsi_qla_host_t *, dma_addr_t, uint16_t, size_t);
extern int
qla2x00_login_fabric(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t,
uint16_t *, uint8_t);
extern int
qla24xx_login_fabric(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t,
uint16_t *, uint8_t);
extern int
qla2x00_login_local_device(scsi_qla_host_t *, fc_port_t *, uint16_t *,
uint8_t);
extern int
qla2x00_fabric_logout(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t);
extern int
qla24xx_fabric_logout(scsi_qla_host_t *, uint16_t, uint8_t, uint8_t, uint8_t);
extern int
qla2x00_full_login_lip(scsi_qla_host_t *ha);
extern int
qla2x00_get_id_list(scsi_qla_host_t *, void *, dma_addr_t, uint16_t *);
extern int
qla2x00_get_resource_cnts(scsi_qla_host_t *);
extern int
qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map);
extern int
qla2x00_get_link_status(scsi_qla_host_t *, uint16_t, struct link_statistics *,
dma_addr_t);
extern int
qla24xx_get_isp_stats(scsi_qla_host_t *, struct link_statistics *,
dma_addr_t, uint16_t);
extern int qla24xx_abort_command(srb_t *);
extern int qla24xx_async_abort_command(srb_t *);
extern int
qla24xx_abort_target(struct fc_port *, uint64_t, int);
extern int
qla24xx_lun_reset(struct fc_port *, uint64_t, int);
extern int
qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *, unsigned int,
uint64_t, enum nexus_wait_type);
extern int
qla2x00_system_error(scsi_qla_host_t *);
extern int
qla2x00_write_serdes_word(scsi_qla_host_t *, uint16_t, uint16_t);
extern int
qla2x00_read_serdes_word(scsi_qla_host_t *, uint16_t, uint16_t *);
extern int
qla8044_write_serdes_word(scsi_qla_host_t *, uint32_t, uint32_t);
extern int
qla8044_read_serdes_word(scsi_qla_host_t *, uint32_t, uint32_t *);
extern int
qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
extern int
qla2x00_stop_firmware(scsi_qla_host_t *);
extern int
qla2x00_enable_eft_trace(scsi_qla_host_t *, dma_addr_t, uint16_t);
extern int
qla2x00_disable_eft_trace(scsi_qla_host_t *);
extern int
qla2x00_enable_fce_trace(scsi_qla_host_t *, dma_addr_t, uint16_t , uint16_t *,
uint32_t *);
extern int
qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *);
extern int
qla82xx_set_driver_version(scsi_qla_host_t *, char *);
extern int
qla25xx_set_driver_version(scsi_qla_host_t *, char *);
extern int
qla25xx_set_els_cmds_supported(scsi_qla_host_t *);
extern int
qla24xx_get_buffer_credits(scsi_qla_host_t *, struct buffer_credit_24xx *,
dma_addr_t);
extern int
qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
uint16_t, uint16_t, uint16_t, uint16_t);
extern int
qla2x00_write_sfp(scsi_qla_host_t *, dma_addr_t, uint8_t *,
uint16_t, uint16_t, uint16_t, uint16_t);
extern int
qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *);
extern int qla84xx_verify_chip(struct scsi_qla_host *, uint16_t *);
extern int qla81xx_idc_ack(scsi_qla_host_t *, uint16_t *);
extern int
qla81xx_fac_get_sector_size(scsi_qla_host_t *, uint32_t *);
extern int
qla81xx_fac_do_write_enable(scsi_qla_host_t *, int);
extern int
qla81xx_fac_erase_sector(scsi_qla_host_t *, uint32_t, uint32_t);
extern int qla81xx_fac_semaphore_access(scsi_qla_host_t *, int);
extern int
qla2x00_get_xgmac_stats(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t *);
extern int
qla2x00_get_dcbx_params(scsi_qla_host_t *, dma_addr_t, uint16_t);
extern int
qla2x00_read_ram_word(scsi_qla_host_t *, uint32_t, uint32_t *);
extern int
qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
extern int
qla81xx_write_mpi_register(scsi_qla_host_t *, uint16_t *);
extern int qla2x00_get_data_rate(scsi_qla_host_t *);
extern int qla24xx_set_fcp_prio(scsi_qla_host_t *, uint16_t, uint16_t,
uint16_t *);
extern int
qla81xx_get_port_config(scsi_qla_host_t *, uint16_t *);
extern int
qla81xx_set_port_config(scsi_qla_host_t *, uint16_t *);
extern int
qla2x00_port_logout(scsi_qla_host_t *, struct fc_port *);
extern int
qla2x00_dump_mctp_data(scsi_qla_host_t *, dma_addr_t, uint32_t, uint32_t);
extern int
qla26xx_dport_diagnostics(scsi_qla_host_t *, void *, uint, uint);
int qla24xx_send_mb_cmd(struct scsi_qla_host *, mbx_cmd_t *);
int qla24xx_gpdb_wait(struct scsi_qla_host *, fc_port_t *, u8);
int qla24xx_gidlist_wait(struct scsi_qla_host *, void *, dma_addr_t,
uint16_t *);
int __qla24xx_parse_gpdb(struct scsi_qla_host *, fc_port_t *,
struct port_database_24xx *);
int qla24xx_get_port_login_templ(scsi_qla_host_t *, dma_addr_t,
void *, uint16_t);
extern int qla27xx_get_zio_threshold(scsi_qla_host_t *, uint16_t *);
extern int qla27xx_set_zio_threshold(scsi_qla_host_t *, uint16_t);
int qla24xx_res_count_wait(struct scsi_qla_host *, uint16_t *, int);
extern int qla28xx_secure_flash_update(scsi_qla_host_t *, uint16_t, uint16_t,
uint32_t, dma_addr_t, uint32_t);
extern int qla2xxx_read_remote_register(scsi_qla_host_t *, uint32_t,
uint32_t *);
extern int qla2xxx_write_remote_register(scsi_qla_host_t *, uint32_t,
uint32_t);
/*
* Global Function Prototypes in qla_isr.c source file.
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
extern irqreturn_t qla2100_intr_handler(int, void *);
extern irqreturn_t qla2300_intr_handler(int, void *);
extern irqreturn_t qla24xx_intr_handler(int, void *);
extern void qla2x00_process_response_queue(struct rsp_que *);
extern void
qla24xx_process_response_queue(struct scsi_qla_host *, struct rsp_que *);
extern int qla2x00_request_irqs(struct qla_hw_data *, struct rsp_que *);
extern void qla2x00_free_irqs(scsi_qla_host_t *);
extern int qla2x00_get_data_rate(scsi_qla_host_t *);
extern const char *qla2x00_get_link_speed_str(struct qla_hw_data *, uint16_t);
extern srb_t *
qla2x00_get_sp_from_handle(scsi_qla_host_t *, const char *, struct req_que *,
void *);
extern void
qla2x00_process_completed_request(struct scsi_qla_host *, struct req_que *,
uint32_t);
extern irqreturn_t
qla2xxx_msix_rsp_q(int irq, void *dev_id);
extern irqreturn_t
qla2xxx_msix_rsp_q_hs(int irq, void *dev_id);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
fc_port_t *qla2x00_find_fcport_by_loopid(scsi_qla_host_t *, uint16_t);
fc_port_t *qla2x00_find_fcport_by_wwpn(scsi_qla_host_t *, u8 *, u8);
fc_port_t *qla2x00_find_fcport_by_nportid(scsi_qla_host_t *, port_id_t *, u8);
/*
* Global Function Prototypes in qla_sup.c source file.
*/
extern void qla2x00_release_nvram_protection(scsi_qla_host_t *);
extern int qla24xx_read_flash_data(scsi_qla_host_t *, uint32_t *,
uint32_t, uint32_t);
extern uint8_t *qla2x00_read_nvram_data(scsi_qla_host_t *, void *, uint32_t,
uint32_t);
extern uint8_t *qla24xx_read_nvram_data(scsi_qla_host_t *, void *, uint32_t,
uint32_t);
extern int qla2x00_write_nvram_data(scsi_qla_host_t *, void *, uint32_t,
uint32_t);
extern int qla24xx_write_nvram_data(scsi_qla_host_t *, void *, uint32_t,
uint32_t);
extern uint8_t *qla25xx_read_nvram_data(scsi_qla_host_t *, void *, uint32_t,
uint32_t);
extern int qla25xx_write_nvram_data(scsi_qla_host_t *, void *, uint32_t,
uint32_t);
extern int qla2x00_is_a_vp_did(scsi_qla_host_t *, uint32_t);
bool qla2x00_check_reg32_for_disconnect(scsi_qla_host_t *, uint32_t);
bool qla2x00_check_reg16_for_disconnect(scsi_qla_host_t *, uint16_t);
extern int qla2x00_beacon_on(struct scsi_qla_host *);
extern int qla2x00_beacon_off(struct scsi_qla_host *);
extern void qla2x00_beacon_blink(struct scsi_qla_host *);
extern int qla24xx_beacon_on(struct scsi_qla_host *);
extern int qla24xx_beacon_off(struct scsi_qla_host *);
extern void qla24xx_beacon_blink(struct scsi_qla_host *);
extern void qla83xx_beacon_blink(struct scsi_qla_host *);
extern int qla82xx_beacon_on(struct scsi_qla_host *);
extern int qla82xx_beacon_off(struct scsi_qla_host *);
extern int qla83xx_wr_reg(scsi_qla_host_t *, uint32_t, uint32_t);
extern int qla83xx_rd_reg(scsi_qla_host_t *, uint32_t, uint32_t *);
extern int qla83xx_restart_nic_firmware(scsi_qla_host_t *);
extern int qla83xx_access_control(scsi_qla_host_t *, uint16_t, uint32_t,
uint32_t, uint16_t *);
extern void *qla2x00_read_optrom_data(struct scsi_qla_host *, void *,
uint32_t, uint32_t);
extern int qla2x00_write_optrom_data(struct scsi_qla_host *, void *,
uint32_t, uint32_t);
extern void *qla24xx_read_optrom_data(struct scsi_qla_host *, void *,
uint32_t, uint32_t);
extern int qla24xx_write_optrom_data(struct scsi_qla_host *, void *,
uint32_t, uint32_t);
extern void *qla25xx_read_optrom_data(struct scsi_qla_host *, void *,
uint32_t, uint32_t);
extern void *qla8044_read_optrom_data(struct scsi_qla_host *,
void *, uint32_t, uint32_t);
extern void qla8044_watchdog(struct scsi_qla_host *vha);
extern int qla2x00_get_flash_version(scsi_qla_host_t *, void *);
extern int qla24xx_get_flash_version(scsi_qla_host_t *, void *);
extern int qla82xx_get_flash_version(scsi_qla_host_t *, void *);
extern int qla2xxx_get_flash_info(scsi_qla_host_t *);
extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t);
extern void qla2xxx_flash_npiv_conf(scsi_qla_host_t *);
extern int qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *);
/*
* Global Function Prototypes in qla_dbg.c source file.
*/
void qla2xxx_dump_fw(scsi_qla_host_t *vha);
void qla2100_fw_dump(scsi_qla_host_t *vha);
void qla2300_fw_dump(scsi_qla_host_t *vha);
void qla24xx_fw_dump(scsi_qla_host_t *vha);
void qla25xx_fw_dump(scsi_qla_host_t *vha);
void qla81xx_fw_dump(scsi_qla_host_t *vha);
void qla82xx_fw_dump(scsi_qla_host_t *vha);
void qla8044_fw_dump(scsi_qla_host_t *vha);
void qla27xx_fwdump(scsi_qla_host_t *vha);
extern void qla27xx_mpi_fwdump(scsi_qla_host_t *, int);
extern ulong qla27xx_fwdt_calculate_dump_size(struct scsi_qla_host *, void *);
extern int qla27xx_fwdt_template_valid(void *);
extern ulong qla27xx_fwdt_template_size(void *);
extern void qla2xxx_dump_post_process(scsi_qla_host_t *, int);
extern void ql_dump_regs(uint, scsi_qla_host_t *, uint);
extern void ql_dump_buffer(uint, scsi_qla_host_t *, uint, const void *, uint);
/*
* Global Function Prototypes in qla_gs.c source file.
*/
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
extern void *qla2x00_prep_ms_iocb(scsi_qla_host_t *, struct ct_arg *);
extern void *qla24xx_prep_ms_iocb(scsi_qla_host_t *, struct ct_arg *);
extern int qla2x00_ga_nxt(scsi_qla_host_t *, fc_port_t *);
extern int qla2x00_gid_pt(scsi_qla_host_t *, sw_info_t *);
extern int qla2x00_gpn_id(scsi_qla_host_t *, sw_info_t *);
extern int qla2x00_gnn_id(scsi_qla_host_t *, sw_info_t *);
extern void qla2x00_gff_id(scsi_qla_host_t *, sw_info_t *);
extern int qla2x00_rft_id(scsi_qla_host_t *);
extern int qla2x00_rff_id(scsi_qla_host_t *, u8);
extern int qla2x00_rnn_id(scsi_qla_host_t *);
extern int qla2x00_rsnn_nn(scsi_qla_host_t *);
extern void *qla2x00_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
extern void *qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
extern int qla2x00_fdmi_register(scsi_qla_host_t *);
extern int qla2x00_gfpn_id(scsi_qla_host_t *, sw_info_t *);
extern int qla2x00_gpsc(scsi_qla_host_t *, sw_info_t *);
extern size_t qla2x00_get_sym_node_name(scsi_qla_host_t *, uint8_t *, size_t);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
extern int qla2x00_chk_ms_status(scsi_qla_host_t *, ms_iocb_entry_t *,
struct ct_sns_rsp *, const char *);
extern void qla2x00_async_iocb_timeout(void *data);
extern void qla2x00_free_fcport(fc_port_t *);
extern int qla24xx_post_gpnid_work(struct scsi_qla_host *, port_id_t *);
extern int qla24xx_async_gpnid(scsi_qla_host_t *, port_id_t *);
void qla24xx_handle_gpnid_event(scsi_qla_host_t *, struct event_arg *);
int qla24xx_post_gpsc_work(struct scsi_qla_host *, fc_port_t *);
int qla24xx_async_gpsc(scsi_qla_host_t *, fc_port_t *);
void qla24xx_handle_gpsc_event(scsi_qla_host_t *, struct event_arg *);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
int qla2x00_mgmt_svr_login(scsi_qla_host_t *);
void qla24xx_handle_gffid_event(scsi_qla_host_t *vha, struct event_arg *ea);
int qla24xx_async_gffid(scsi_qla_host_t *vha, fc_port_t *fcport);
int qla24xx_async_gpnft(scsi_qla_host_t *, u8, srb_t *);
void qla24xx_async_gpnft_done(scsi_qla_host_t *, srb_t *);
void qla24xx_async_gnnft_done(scsi_qla_host_t *, srb_t *);
int qla24xx_async_gnnid(scsi_qla_host_t *, fc_port_t *);
void qla24xx_handle_gnnid_event(scsi_qla_host_t *, struct event_arg *);
int qla24xx_post_gnnid_work(struct scsi_qla_host *, fc_port_t *);
int qla24xx_post_gfpnid_work(struct scsi_qla_host *, fc_port_t *);
int qla24xx_async_gfpnid(scsi_qla_host_t *, fc_port_t *);
void qla24xx_handle_gfpnid_event(scsi_qla_host_t *, struct event_arg *);
void qla24xx_sp_unmap(scsi_qla_host_t *, srb_t *);
void qla_scan_work_fn(struct work_struct *);
uint qla25xx_fdmi_port_speed_capability(struct qla_hw_data *);
uint qla25xx_fdmi_port_speed_currently(struct qla_hw_data *);
/*
* Global Function Prototypes in qla_attr.c source file.
*/
struct device_attribute;
extern struct device_attribute *qla2x00_host_attrs[];
extern struct device_attribute *qla2x00_host_attrs_dm[];
struct fc_function_template;
extern struct fc_function_template qla2xxx_transport_functions;
extern struct fc_function_template qla2xxx_transport_vport_functions;
extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *, bool);
extern void qla2x00_init_host_attr(scsi_qla_host_t *);
extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
extern int qla2x00_loopback_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *);
extern int qla2x00_echo_test(scsi_qla_host_t *,
struct msg_echo_lb *, uint16_t *);
extern int qla24xx_update_all_fcp_prio(scsi_qla_host_t *);
extern int qla24xx_fcp_prio_cfg_valid(scsi_qla_host_t *,
struct qla_fcp_prio_cfg *, uint8_t);
void qla_insert_tgt_attrs(void);
/*
* Global Function Prototypes in qla_dfs.c source file.
*/
extern int qla2x00_dfs_setup(scsi_qla_host_t *);
extern int qla2x00_dfs_remove(scsi_qla_host_t *);
/* Globa function prototypes for multi-q */
extern int qla25xx_request_irq(struct qla_hw_data *, struct qla_qpair *,
struct qla_msix_entry *, int);
extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
uint16_t, int, uint8_t, bool);
extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
uint16_t, struct qla_qpair *, bool);
extern void qla2x00_init_response_q_entries(struct rsp_que *);
extern int qla25xx_delete_req_que(struct scsi_qla_host *, struct req_que *);
extern int qla25xx_delete_rsp_que(struct scsi_qla_host *, struct rsp_que *);
extern int qla25xx_delete_queues(struct scsi_qla_host *);
extern uint16_t qla24xx_rd_req_reg(struct qla_hw_data *, uint16_t);
extern uint16_t qla25xx_rd_req_reg(struct qla_hw_data *, uint16_t);
extern void qla24xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
/* qlafx00 related functions */
extern int qlafx00_pci_config(struct scsi_qla_host *);
extern int qlafx00_initialize_adapter(struct scsi_qla_host *);
extern int qlafx00_soft_reset(scsi_qla_host_t *);
extern int qlafx00_chip_diag(scsi_qla_host_t *);
extern void qlafx00_config_rings(struct scsi_qla_host *);
extern char *qlafx00_pci_info_str(struct scsi_qla_host *, char *, size_t);
extern char *qlafx00_fw_version_str(struct scsi_qla_host *, char *, size_t);
extern irqreturn_t qlafx00_intr_handler(int, void *);
extern void qlafx00_enable_intrs(struct qla_hw_data *);
extern void qlafx00_disable_intrs(struct qla_hw_data *);
extern int qlafx00_abort_target(fc_port_t *, uint64_t, int);
extern int qlafx00_lun_reset(fc_port_t *, uint64_t, int);
extern int qlafx00_start_scsi(srb_t *);
extern int qlafx00_abort_isp(scsi_qla_host_t *);
extern int qlafx00_iospace_config(struct qla_hw_data *);
extern int qlafx00_init_firmware(scsi_qla_host_t *, uint16_t);
extern int qlafx00_driver_shutdown(scsi_qla_host_t *, int);
extern int qlafx00_fw_ready(scsi_qla_host_t *);
extern int qlafx00_configure_devices(scsi_qla_host_t *);
extern int qlafx00_reset_initialize(scsi_qla_host_t *);
extern int qlafx00_fx_disc(scsi_qla_host_t *, fc_port_t *, uint16_t);
extern void qlafx00_process_aen(struct scsi_qla_host *, struct qla_work_evt *);
extern int qlafx00_post_aenfx_work(struct scsi_qla_host *, uint32_t,
uint32_t *, int);
extern uint32_t qlafx00_fw_state_show(struct device *,
struct device_attribute *, char *);
extern void qlafx00_get_host_speed(struct Scsi_Host *);
extern void qlafx00_init_response_q_entries(struct rsp_que *);
extern void qlafx00_tm_iocb(srb_t *, struct tsk_mgmt_entry_fx00 *);
extern void qlafx00_abort_iocb(srb_t *, struct abort_iocb_entry_fx00 *);
extern void qlafx00_fxdisc_iocb(srb_t *, struct fxdisc_entry_fx00 *);
extern void qlafx00_timer_routine(scsi_qla_host_t *);
extern int qlafx00_rescan_isp(scsi_qla_host_t *);
extern int qlafx00_loop_reset(scsi_qla_host_t *vha);
/* qla82xx related functions */
/* PCI related functions */
extern int qla82xx_pci_config(struct scsi_qla_host *);
extern int qla82xx_pci_mem_read_2M(struct qla_hw_data *, u64, void *, int);
extern int qla82xx_pci_region_offset(struct pci_dev *, int);
extern int qla82xx_iospace_config(struct qla_hw_data *);
/* Initialization related functions */
extern int qla82xx_reset_chip(struct scsi_qla_host *);
extern void qla82xx_config_rings(struct scsi_qla_host *);
extern void qla82xx_watchdog(scsi_qla_host_t *);
extern int qla82xx_start_firmware(scsi_qla_host_t *);
/* Firmware and flash related functions */
extern int qla82xx_load_risc(scsi_qla_host_t *, uint32_t *);
extern void *qla82xx_read_optrom_data(struct scsi_qla_host *, void *,
uint32_t, uint32_t);
extern int qla82xx_write_optrom_data(struct scsi_qla_host *, void *,
uint32_t, uint32_t);
/* Mailbox related functions */
extern int qla82xx_abort_isp(scsi_qla_host_t *);
extern int qla82xx_restart_isp(scsi_qla_host_t *);
/* IOCB related functions */
extern int qla82xx_start_scsi(srb_t *);
extern void qla2x00_sp_free(srb_t *sp);
extern void qla2x00_sp_timeout(struct timer_list *);
extern void qla2x00_bsg_job_done(srb_t *sp, int);
extern void qla2x00_bsg_sp_free(srb_t *sp);
[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16 02:34:28 +08:00
extern void qla2x00_start_iocbs(struct scsi_qla_host *, struct req_que *);
/* Interrupt related */
extern irqreturn_t qla82xx_intr_handler(int, void *);
extern irqreturn_t qla82xx_msi_handler(int, void *);
extern irqreturn_t qla82xx_msix_default(int, void *);
extern irqreturn_t qla82xx_msix_rsp_q(int, void *);
extern void qla82xx_enable_intrs(struct qla_hw_data *);
extern void qla82xx_disable_intrs(struct qla_hw_data *);
extern void qla82xx_poll(int, void *);
extern void qla82xx_init_flags(struct qla_hw_data *);
/* ISP 8021 hardware related */
extern void qla82xx_set_drv_active(scsi_qla_host_t *);
extern int qla82xx_wr_32(struct qla_hw_data *, ulong, u32);
extern int qla82xx_rd_32(struct qla_hw_data *, ulong);
extern int qla82xx_rdmem(struct qla_hw_data *, u64, void *, int);
extern int qla82xx_wrmem(struct qla_hw_data *, u64, void *, int);
/* ISP 8021 IDC */
extern void qla82xx_clear_drv_active(struct qla_hw_data *);
extern uint32_t qla82xx_wait_for_state_change(scsi_qla_host_t *, uint32_t);
extern int qla82xx_idc_lock(struct qla_hw_data *);
extern void qla82xx_idc_unlock(struct qla_hw_data *);
extern int qla82xx_device_state_handler(scsi_qla_host_t *);
extern void qla8xxx_dev_failed_handler(scsi_qla_host_t *);
extern void qla82xx_clear_qsnt_ready(scsi_qla_host_t *);
extern void qla2x00_set_model_info(scsi_qla_host_t *, uint8_t *, size_t,
const char *);
extern int qla82xx_mbx_intr_enable(scsi_qla_host_t *);
extern int qla82xx_mbx_intr_disable(scsi_qla_host_t *);
extern void qla82xx_start_iocbs(scsi_qla_host_t *);
extern int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *);
extern int qla82xx_check_md_needed(scsi_qla_host_t *);
extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *);
extern int qla81xx_set_led_config(scsi_qla_host_t *, uint16_t *);
extern int qla81xx_get_led_config(scsi_qla_host_t *, uint16_t *);
extern int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *, int);
extern char *qdev_state(uint32_t);
extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *);
extern int qla82xx_read_temperature(scsi_qla_host_t *);
extern int qla8044_read_temperature(scsi_qla_host_t *);
extern int qla2x00_read_sfp_dev(struct scsi_qla_host *, char *, int);
extern int ql26xx_led_config(scsi_qla_host_t *, uint16_t, uint16_t *);
/* BSG related functions */
extern int qla24xx_bsg_request(struct bsg_job *);
extern int qla24xx_bsg_timeout(struct bsg_job *);
extern int qla84xx_reset_chip(scsi_qla_host_t *, uint16_t);
extern int qla2x00_issue_iocb_timeout(scsi_qla_host_t *, void *,
dma_addr_t, size_t, uint32_t);
extern int qla2x00_get_idma_speed(scsi_qla_host_t *, uint16_t,
uint16_t *, uint16_t *);
/* 83xx related functions */
void qla83xx_fw_dump(scsi_qla_host_t *vha);
/* Minidump related functions */
extern int qla82xx_md_get_template_size(scsi_qla_host_t *);
extern int qla82xx_md_get_template(scsi_qla_host_t *);
extern int qla82xx_md_alloc(scsi_qla_host_t *);
extern void qla82xx_md_free(scsi_qla_host_t *);
extern int qla82xx_md_collect(scsi_qla_host_t *);
extern void qla82xx_md_prep(scsi_qla_host_t *);
extern void qla82xx_set_reset_owner(scsi_qla_host_t *);
extern int qla82xx_validate_template_chksum(scsi_qla_host_t *vha);
/* Function declarations for ISP8044 */
extern int qla8044_idc_lock(struct qla_hw_data *ha);
extern void qla8044_idc_unlock(struct qla_hw_data *ha);
extern uint32_t qla8044_rd_reg(struct qla_hw_data *ha, ulong addr);
extern void qla8044_wr_reg(struct qla_hw_data *ha, ulong addr, uint32_t val);
extern void qla8044_read_reset_template(struct scsi_qla_host *ha);
extern void qla8044_set_idc_dontreset(struct scsi_qla_host *ha);
extern int qla8044_rd_direct(struct scsi_qla_host *vha, const uint32_t crb_reg);
extern void qla8044_wr_direct(struct scsi_qla_host *vha,
const uint32_t crb_reg, const uint32_t value);
extern int qla8044_device_state_handler(struct scsi_qla_host *vha);
extern void qla8044_clear_qsnt_ready(struct scsi_qla_host *vha);
extern void qla8044_clear_drv_active(struct qla_hw_data *);
void qla8044_get_minidump(struct scsi_qla_host *vha);
int qla8044_collect_md_data(struct scsi_qla_host *vha);
extern int qla8044_md_get_template(scsi_qla_host_t *);
extern int qla8044_write_optrom_data(struct scsi_qla_host *, void *,
uint32_t, uint32_t);
extern irqreturn_t qla8044_intr_handler(int, void *);
extern void qla82xx_mbx_completion(scsi_qla_host_t *, uint16_t);
extern int qla8044_abort_isp(scsi_qla_host_t *);
extern int qla8044_check_fw_alive(struct scsi_qla_host *);
extern int qla_get_exlogin_status(scsi_qla_host_t *, uint16_t *,
uint16_t *);
extern int qla_set_exlogin_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr);
extern int qla_get_exchoffld_status(scsi_qla_host_t *, uint16_t *, uint16_t *);
extern int qla_set_exchoffld_mem_cfg(scsi_qla_host_t *);
extern void qlt_handle_abts_recv(struct scsi_qla_host *, struct rsp_que *,
response_t *);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
int qla24xx_async_notify_ack(scsi_qla_host_t *, fc_port_t *,
struct imm_ntfy_from_isp *, int);
void qla24xx_do_nack_work(struct scsi_qla_host *, struct qla_work_evt *);
void qlt_plogi_ack_link(struct scsi_qla_host *, struct qlt_plogi_ack_t *,
struct fc_port *, enum qlt_plogi_link_t);
void qlt_plogi_ack_unref(struct scsi_qla_host *, struct qlt_plogi_ack_t *);
extern void qlt_schedule_sess_for_deletion(struct fc_port *);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
extern struct fc_port *qlt_find_sess_invalidate_other(scsi_qla_host_t *,
uint64_t wwn, port_id_t port_id, uint16_t loop_id, struct fc_port **);
void qla24xx_delete_sess_fn(struct work_struct *);
void qlt_unknown_atio_work_fn(struct work_struct *);
void qlt_update_host_map(struct scsi_qla_host *, port_id_t);
void qlt_remove_target_resources(struct qla_hw_data *);
void qlt_clr_qp_table(struct scsi_qla_host *vha);
void qlt_set_mode(struct scsi_qla_host *);
int qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode);
extern void qla24xx_process_purex_list(struct purex_list *);
extern void qla2x00_dfs_create_rport(scsi_qla_host_t *vha, struct fc_port *fp);
extern void qla2x00_dfs_remove_rport(scsi_qla_host_t *vha, struct fc_port *fp);
extern void qla_wait_nvme_release_cmd_kref(srb_t *sp);
extern void qla_nvme_abort_set_option
(struct abort_entry_24xx *abt, srb_t *sp);
extern void qla_nvme_abort_process_comp_status
(struct abort_entry_24xx *abt, srb_t *sp);
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 14:28:00 +08:00
/* nvme.c */
void qla_nvme_unregister_remote_port(struct fc_port *fcport);
void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea);
#define QLA2XX_HW_ERROR BIT_0
#define QLA2XX_SHT_LNK_DWN BIT_1
#define QLA2XX_INT_ERR BIT_2
#define QLA2XX_CMD_TIMEOUT BIT_3
#define QLA2XX_RESET_CMD_ERR BIT_4
#define QLA2XX_TGT_SHT_LNK_DOWN BIT_17
#define QLA2XX_MAX_LINK_DOWN_TIME 100
int qla2xxx_start_stats(struct Scsi_Host *shost, u32 flags);
int qla2xxx_stop_stats(struct Scsi_Host *shost, u32 flags);
int qla2xxx_reset_stats(struct Scsi_Host *shost, u32 flags);
int qla2xxx_get_ini_stats(struct Scsi_Host *shost, u32 flags, void *data, u64 size);
int qla2xxx_get_tgt_stats(struct Scsi_Host *shost, u32 flags,
struct fc_rport *rport, void *data, u64 size);
int qla2xxx_disable_port(struct Scsi_Host *shost);
int qla2xxx_enable_port(struct Scsi_Host *shost);
uint64_t qla2x00_get_num_tgts(scsi_qla_host_t *vha);
uint64_t qla2x00_count_set_bits(u32 num);
#endif /* _QLA_GBL_H */