OpenCloudOS-Kernel/net/mac80211/iface.c

1574 lines
40 KiB
C
Raw Normal View History

/*
* Interface handling (except master interface)
*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
* Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
#include "ieee80211_i.h"
#include "sta_info.h"
#include "debugfs_netdev.h"
#include "mesh.h"
#include "led.h"
#include "driver-ops.h"
#include "wme.h"
#include "rate.h"
/**
* DOC: Interface list locking
*
* The interface list in each struct ieee80211_local is protected
* three-fold:
*
* (1) modifications may only be done under the RTNL
* (2) modifications and readers are protected against each other by
* the iflist_mtx.
* (3) modifications are done in an RCU manner so atomic readers
* can traverse the list in RCU-safe blocks.
*
* As a consequence, reads (traversals) of the list can be protected
* by either the RTNL, the iflist_mtx or RCU.
*/
static u32 ieee80211_idle_off(struct ieee80211_local *local,
const char *reason)
{
if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
return 0;
local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
return IEEE80211_CONF_CHANGE_IDLE;
}
static u32 ieee80211_idle_on(struct ieee80211_local *local)
{
if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
return 0;
drv_flush(local, false);
local->hw.conf.flags |= IEEE80211_CONF_IDLE;
return IEEE80211_CONF_CHANGE_IDLE;
}
static u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
int count = 0;
bool working = false, scanning = false;
unsigned int led_trig_start = 0, led_trig_stop = 0;
struct ieee80211_roc_work *roc;
#ifdef CONFIG_PROVE_LOCKING
WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
!lockdep_is_held(&local->iflist_mtx));
#endif
lockdep_assert_held(&local->mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata)) {
sdata->vif.bss_conf.idle = true;
continue;
}
sdata->old_idle = sdata->vif.bss_conf.idle;
/* do not count disabled managed interfaces */
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
!sdata->u.mgd.associated &&
!sdata->u.mgd.auth_data &&
!sdata->u.mgd.assoc_data) {
sdata->vif.bss_conf.idle = true;
continue;
}
/* do not count unused IBSS interfaces */
if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
!sdata->u.ibss.ssid_len) {
sdata->vif.bss_conf.idle = true;
continue;
}
/* count everything else */
sdata->vif.bss_conf.idle = false;
count++;
}
if (!local->ops->remain_on_channel) {
list_for_each_entry(roc, &local->roc_list, list) {
working = true;
roc->sdata->vif.bss_conf.idle = false;
}
}
sdata = rcu_dereference_protected(local->scan_sdata,
lockdep_is_held(&local->mtx));
if (sdata && !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) {
scanning = true;
sdata->vif.bss_conf.idle = false;
}
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
continue;
if (sdata->old_idle == sdata->vif.bss_conf.idle)
continue;
if (!ieee80211_sdata_running(sdata))
continue;
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
}
if (working || scanning)
led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
else
led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
if (count)
led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
else
led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
if (working)
return ieee80211_idle_off(local, "working");
if (scanning)
return ieee80211_idle_off(local, "scanning");
if (!count)
return ieee80211_idle_on(local);
else
return ieee80211_idle_off(local, "in use");
return 0;
}
void ieee80211_recalc_idle(struct ieee80211_local *local)
{
u32 chg;
mutex_lock(&local->iflist_mtx);
chg = __ieee80211_recalc_idle(local);
mutex_unlock(&local->iflist_mtx);
if (chg)
ieee80211_hw_config(local, chg);
}
static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
{
int meshhdrlen;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
/* FIX: what would be proper limits for MTU?
* This interface uses 802.3 frames. */
if (new_mtu < 256 ||
new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
return -EINVAL;
}
dev->mtu = new_mtu;
return 0;
}
static int ieee80211_change_mac(struct net_device *dev, void *addr)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sockaddr *sa = addr;
int ret;
if (ieee80211_sdata_running(sdata))
return -EBUSY;
ret = eth_mac_addr(dev, sa);
if (ret == 0)
memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN);
return ret;
}
static inline int identical_mac_addr_allowed(int type1, int type2)
{
return type1 == NL80211_IFTYPE_MONITOR ||
type2 == NL80211_IFTYPE_MONITOR ||
(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
(type1 == NL80211_IFTYPE_WDS &&
(type2 == NL80211_IFTYPE_WDS ||
type2 == NL80211_IFTYPE_AP)) ||
(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
(type1 == NL80211_IFTYPE_AP_VLAN &&
(type2 == NL80211_IFTYPE_AP ||
type2 == NL80211_IFTYPE_AP_VLAN));
}
static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype iftype)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_sub_if_data *nsdata;
ASSERT_RTNL();
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(nsdata, &local->interfaces, list) {
if (nsdata != sdata && ieee80211_sdata_running(nsdata)) {
/*
* Allow only a single IBSS interface to be up at any
* time. This is restricted because beacon distribution
* cannot work properly if both are in the same IBSS.
*
* To remove this restriction we'd have to disallow them
* from setting the same SSID on different IBSS interfaces
* belonging to the same hardware. Then, however, we're
* faced with having to adopt two different TSF timers...
*/
if (iftype == NL80211_IFTYPE_ADHOC &&
nsdata->vif.type == NL80211_IFTYPE_ADHOC)
return -EBUSY;
/*
* The remaining checks are only performed for interfaces
* with the same MAC address.
*/
if (!ether_addr_equal(sdata->vif.addr,
nsdata->vif.addr))
continue;
/*
* check whether it may have the same address
*/
if (!identical_mac_addr_allowed(iftype,
nsdata->vif.type))
return -ENOTUNIQ;
/*
* can only add VLANs to enabled APs
*/
if (iftype == NL80211_IFTYPE_AP_VLAN &&
nsdata->vif.type == NL80211_IFTYPE_AP)
sdata->bss = &nsdata->u.ap;
}
}
return 0;
}
static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata)
{
int n_queues = sdata->local->hw.queues;
int i;
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
if (WARN_ON_ONCE(sdata->vif.hw_queue[i] ==
IEEE80211_INVAL_HW_QUEUE))
return -EINVAL;
if (WARN_ON_ONCE(sdata->vif.hw_queue[i] >=
n_queues))
return -EINVAL;
}
if ((sdata->vif.type != NL80211_IFTYPE_AP) ||
!(sdata->local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)) {
sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
return 0;
}
if (WARN_ON_ONCE(sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE))
return -EINVAL;
if (WARN_ON_ONCE(sdata->vif.cab_queue >= n_queues))
return -EINVAL;
return 0;
}
void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
const int offset)
{
struct ieee80211_local *local = sdata->local;
u32 flags = sdata->u.mntr_flags;
#define ADJUST(_f, _s) do { \
if (flags & MONITOR_FLAG_##_f) \
local->fif_##_s += offset; \
} while (0)
ADJUST(FCSFAIL, fcsfail);
ADJUST(PLCPFAIL, plcpfail);
ADJUST(CONTROL, control);
ADJUST(CONTROL, pspoll);
ADJUST(OTHER_BSS, other_bss);
#undef ADJUST
}
static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
int i;
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)
sdata->vif.hw_queue[i] = IEEE80211_INVAL_HW_QUEUE;
else if (local->hw.queues >= IEEE80211_NUM_ACS)
sdata->vif.hw_queue[i] = i;
else
sdata->vif.hw_queue[i] = 0;
}
sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
}
static int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
int ret = 0;
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return 0;
mutex_lock(&local->iflist_mtx);
if (local->monitor_sdata)
goto out_unlock;
sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL);
if (!sdata) {
ret = -ENOMEM;
goto out_unlock;
}
/* set up data */
sdata->local = local;
sdata->vif.type = NL80211_IFTYPE_MONITOR;
snprintf(sdata->name, IFNAMSIZ, "%s-monitor",
wiphy_name(local->hw.wiphy));
ieee80211_set_default_queues(sdata);
ret = drv_add_interface(local, sdata);
if (WARN_ON(ret)) {
/* ok .. stupid driver, it asked for this! */
kfree(sdata);
goto out_unlock;
}
ret = ieee80211_check_queues(sdata);
if (ret) {
kfree(sdata);
goto out_unlock;
}
rcu_assign_pointer(local->monitor_sdata, sdata);
out_unlock:
mutex_unlock(&local->iflist_mtx);
return ret;
}
static void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return;
mutex_lock(&local->iflist_mtx);
sdata = rcu_dereference_protected(local->monitor_sdata,
lockdep_is_held(&local->iflist_mtx));
if (!sdata)
goto out_unlock;
rcu_assign_pointer(local->monitor_sdata, NULL);
synchronize_net();
drv_remove_interface(local, sdata);
kfree(sdata);
out_unlock:
mutex_unlock(&local->iflist_mtx);
}
/*
* NOTE: Be very careful when changing this function, it must NOT return
* an error on interface type changes that have been pre-checked, so most
* checks should be in ieee80211_check_concurrent_iface.
*/
static int ieee80211_do_open(struct net_device *dev, bool coming_up)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0;
int res;
u32 hw_reconf_flags = 0;
switch (sdata->vif.type) {
case NL80211_IFTYPE_WDS:
if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
return -ENOLINK;
break;
case NL80211_IFTYPE_AP_VLAN: {
struct ieee80211_sub_if_data *master;
if (!sdata->bss)
return -ENOLINK;
list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
master = container_of(sdata->bss,
struct ieee80211_sub_if_data, u.ap);
sdata->control_port_protocol =
master->control_port_protocol;
sdata->control_port_no_encrypt =
master->control_port_no_encrypt;
break;
}
case NL80211_IFTYPE_AP:
sdata->bss = &sdata->u.ap;
break;
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_ADHOC:
/* no special treatment */
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
/* cannot happen */
WARN_ON(1);
break;
}
if (local->open_count == 0) {
res = drv_start(local);
if (res)
goto err_del_bss;
if (local->ops->napi_poll)
napi_enable(&local->napi);
/* we're brought up, everything changes */
hw_reconf_flags = ~0;
ieee80211_led_radio(local, true);
ieee80211_mod_tpt_led_trig(local,
IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
}
/*
* Copy the hopefully now-present MAC address to
* this interface, if it has the special null one.
*/
if (is_zero_ether_addr(dev->dev_addr)) {
memcpy(dev->dev_addr,
local->hw.wiphy->perm_addr,
ETH_ALEN);
memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
if (!is_valid_ether_addr(dev->dev_addr)) {
res = -EADDRNOTAVAIL;
goto err_stop;
}
}
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
/* no need to tell driver, but set carrier */
if (rtnl_dereference(sdata->bss->beacon))
netif_carrier_on(dev);
else
netif_carrier_off(dev);
break;
case NL80211_IFTYPE_MONITOR:
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
local->cooked_mntrs++;
break;
}
if (local->monitors == 0 && local->open_count == 0) {
res = ieee80211_add_virtual_monitor(local);
if (res)
goto err_stop;
}
/* must be before the call to ieee80211_configure_filter */
local->monitors++;
if (local->monitors == 1) {
local->hw.conf.flags |= IEEE80211_CONF_MONITOR;
hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
}
ieee80211_adjust_monitor_flags(sdata, 1);
ieee80211_configure_filter(local);
netif_carrier_on(dev);
break;
default:
if (coming_up) {
ieee80211_del_virtual_monitor(local);
res = drv_add_interface(local, sdata);
if (res)
goto err_stop;
res = ieee80211_check_queues(sdata);
if (res)
goto err_del_interface;
}
if (sdata->vif.type == NL80211_IFTYPE_AP) {
local->fif_pspoll++;
local->fif_probe_req++;
ieee80211_configure_filter(local);
} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
local->fif_probe_req++;
}
changed |= ieee80211_reset_erp_info(sdata);
ieee80211_bss_info_change_notify(sdata, changed);
if (sdata->vif.type == NL80211_IFTYPE_STATION ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_AP)
netif_carrier_off(dev);
else
netif_carrier_on(dev);
/*
* set default queue parameters so drivers don't
* need to initialise the hardware if the hardware
* doesn't start up with sane defaults
*/
ieee80211_set_wmm_default(sdata, true);
}
set_bit(SDATA_STATE_RUNNING, &sdata->state);
if (sdata->vif.type == NL80211_IFTYPE_WDS) {
/* Create STA entry for the WDS peer */
sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
GFP_KERNEL);
if (!sta) {
res = -ENOMEM;
goto err_del_interface;
}
sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
res = sta_info_insert(sta);
if (res) {
/* STA has been freed */
goto err_del_interface;
}
rate_control_rate_init(sta);
}
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
* error and sync them down to the hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_inc(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_inc(&local->iff_promiscs);
mutex_lock(&local->mtx);
mac80211: tell driver when idle When we aren't doing anything in mac80211, we can turn off much of the hardware, depending on the driver/hw. Not doing anything, aka being idle, means: * no monitor interfaces * no AP/mesh/wds interfaces * any station interfaces are in DISABLED state * any IBSS interfaces aren't trying to be in a network * we aren't trying to scan By creating a new function that verifies these conditions and calling it at strategic points where the states of those conditions change, we can easily make mac80211 tell the driver when we are idle to save power. Additionally, this fixes a small quirk where a recalculated powersave state is passed to the driver even if the hardware is about to stopped completely. This patch intentionally doesn't touch radio_enabled because that is currently implemented to be a soft rfkill which is inappropriate here when we need to be able to wake up with low latency. One thing I'm not entirely sure about is this: phy0: device no longer idle - in use wlan0: direct probe to AP 00:11:24:91:07:4d try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:11:24:91:07:4d wlan0: authenticated > phy0: device now idle > phy0: device no longer idle - in use wlan0: associate with AP 00:11:24:91:07:4d wlan0: RX AssocResp from 00:11:24:91:07:4d (capab=0x401 status=0 aid=1) wlan0: associated Is it appropriate to go into idle state for a short time when we have just authenticated, but not associated yet? This happens only with the userspace SME, because we cannot really know how long it will wait before asking us to associate. Would going idle after a short timeout be more appropriate? We may need to revisit this, depending on what happens. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-29 18:26:17 +08:00
hw_reconf_flags |= __ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
mac80211: tell driver when idle When we aren't doing anything in mac80211, we can turn off much of the hardware, depending on the driver/hw. Not doing anything, aka being idle, means: * no monitor interfaces * no AP/mesh/wds interfaces * any station interfaces are in DISABLED state * any IBSS interfaces aren't trying to be in a network * we aren't trying to scan By creating a new function that verifies these conditions and calling it at strategic points where the states of those conditions change, we can easily make mac80211 tell the driver when we are idle to save power. Additionally, this fixes a small quirk where a recalculated powersave state is passed to the driver even if the hardware is about to stopped completely. This patch intentionally doesn't touch radio_enabled because that is currently implemented to be a soft rfkill which is inappropriate here when we need to be able to wake up with low latency. One thing I'm not entirely sure about is this: phy0: device no longer idle - in use wlan0: direct probe to AP 00:11:24:91:07:4d try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:11:24:91:07:4d wlan0: authenticated > phy0: device now idle > phy0: device no longer idle - in use wlan0: associate with AP 00:11:24:91:07:4d wlan0: RX AssocResp from 00:11:24:91:07:4d (capab=0x401 status=0 aid=1) wlan0: associated Is it appropriate to go into idle state for a short time when we have just authenticated, but not associated yet? This happens only with the userspace SME, because we cannot really know how long it will wait before asking us to associate. Would going idle after a short timeout be more appropriate? We may need to revisit this, depending on what happens. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-29 18:26:17 +08:00
if (coming_up)
local->open_count++;
if (hw_reconf_flags)
ieee80211_hw_config(local, hw_reconf_flags);
ieee80211_recalc_ps(local, -1);
netif_tx_start_all_queues(dev);
return 0;
err_del_interface:
drv_remove_interface(local, sdata);
err_stop:
if (!local->open_count)
drv_stop(local);
err_del_bss:
sdata->bss = NULL;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
list_del(&sdata->u.vlan.list);
/* might already be clear but that doesn't matter */
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
return res;
}
static int ieee80211_open(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int err;
/* fail early if user set an invalid address */
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type);
if (err)
return err;
return ieee80211_do_open(dev, true);
}
static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
bool going_down)
{
struct ieee80211_local *local = sdata->local;
unsigned long flags;
struct sk_buff *skb, *tmp;
u32 hw_reconf_flags = 0;
int i;
enum nl80211_channel_type orig_ct;
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
if (rcu_access_pointer(local->scan_sdata) == sdata)
ieee80211_scan_cancel(local);
/*
* Stop TX on this interface first.
*/
netif_tx_stop_all_queues(sdata->dev);
ieee80211_roc_purge(sdata);
/*
* Remove all stations associated with this interface.
*
* This must be done before calling ops->remove_interface()
* because otherwise we can later invoke ops->sta_notify()
* whenever the STAs are removed, and that invalidates driver
* assumptions about always getting a vif pointer that is valid
* (because if we remove a STA after ops->remove_interface()
* the driver will have removed the vif info already!)
*
* This is relevant only in AP, WDS and mesh modes, since in
* all other modes we've already removed all stations when
* disconnecting etc.
*/
sta_info_flush(local, sdata);
/*
* Don't count this interface for promisc/allmulti while it
* is down. dev_mc_unsync() will invoke set_multicast_list
* on the master interface which will sync these down to the
* hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_dec(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_dec(&local->iff_promiscs);
if (sdata->vif.type == NL80211_IFTYPE_AP) {
local->fif_pspoll--;
local->fif_probe_req--;
} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
local->fif_probe_req--;
}
netif_addr_lock_bh(sdata->dev);
spin_lock_bh(&local->filter_lock);
__hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
sdata->dev->addr_len);
spin_unlock_bh(&local->filter_lock);
netif_addr_unlock_bh(sdata->dev);
ieee80211_configure_filter(local);
del_timer_sync(&local->dynamic_ps_timer);
cancel_work_sync(&local->dynamic_ps_enable_work);
/* APs need special treatment */
if (sdata->vif.type == NL80211_IFTYPE_AP) {
struct ieee80211_sub_if_data *vlan, *tmpsdata;
struct beacon_data *old_beacon =
rtnl_dereference(sdata->u.ap.beacon);
struct sk_buff *old_probe_resp =
rtnl_dereference(sdata->u.ap.probe_resp);
/* sdata_running will return false, so this will disable */
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_ENABLED);
/* remove beacon and probe response */
RCU_INIT_POINTER(sdata->u.ap.beacon, NULL);
RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL);
synchronize_rcu();
kfree(old_beacon);
kfree_skb(old_probe_resp);
/* down all dependent devices, that is VLANs */
list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
u.vlan.list)
dev_close(vlan->dev);
WARN_ON(!list_empty(&sdata->u.ap.vlans));
/* free all potentially still buffered bcast frames */
local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps_bc_buf);
skb_queue_purge(&sdata->u.ap.ps_bc_buf);
mac80211: call ieee80211_mgd_stop() on interface stop ieee80211_mgd_teardown() is called on netdev removal, which occurs after the vif was already removed from the low-level driver, resulting in the following warning: [ 4809.014734] ------------[ cut here ]------------ [ 4809.019861] WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]() [ 4809.030388] wlan0: Failed check-sdata-in-driver check, flags: 0x4 [ 4809.036862] Modules linked in: wlcore_sdio(-) wl12xx wlcore mac80211 cfg80211 [last unloaded: cfg80211] [ 4809.046849] [<c001bd4c>] (unwind_backtrace+0x0/0x12c) [ 4809.055937] [<c047cf1c>] (dump_stack+0x20/0x24) [ 4809.065385] [<c003e334>] (warn_slowpath_common+0x5c/0x74) [ 4809.075589] [<c003e408>] (warn_slowpath_fmt+0x40/0x48) [ 4809.088291] [<bf033630>] (ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]) [ 4809.102844] [<bf067f84>] (ieee80211_destroy_auth_data+0x80/0xa4 [mac80211]) [ 4809.116276] [<bf068004>] (ieee80211_mgd_teardown+0x5c/0x74 [mac80211]) [ 4809.129331] [<bf043f18>] (ieee80211_teardown_sdata+0xb0/0xd8 [mac80211]) [ 4809.141595] [<c03b5e58>] (rollback_registered_many+0x228/0x2f0) [ 4809.153056] [<c03b5f48>] (unregister_netdevice_many+0x28/0x50) [ 4809.165696] [<bf041ea8>] (ieee80211_remove_interfaces+0xb4/0xdc [mac80211]) [ 4809.179151] [<bf032174>] (ieee80211_unregister_hw+0x50/0xf0 [mac80211]) [ 4809.191043] [<bf0bebb4>] (wlcore_remove+0x5c/0x7c [wlcore]) [ 4809.201491] [<c02c6918>] (platform_drv_remove+0x24/0x28) [ 4809.212029] [<c02c4d50>] (__device_release_driver+0x8c/0xcc) [ 4809.222738] [<c02c4e84>] (device_release_driver+0x30/0x3c) [ 4809.233099] [<c02c4258>] (bus_remove_device+0x10c/0x128) [ 4809.242620] [<c02c26f8>] (device_del+0x11c/0x17c) [ 4809.252150] [<c02c6de0>] (platform_device_del+0x28/0x68) [ 4809.263051] [<bf0df49c>] (wl1271_remove+0x3c/0x50 [wlcore_sdio]) [ 4809.273590] [<c03806b0>] (sdio_bus_remove+0x48/0xf8) [ 4809.283754] [<c02c4d50>] (__device_release_driver+0x8c/0xcc) [ 4809.293729] [<c02c4e2c>] (driver_detach+0x9c/0xc4) [ 4809.303163] [<c02c3d7c>] (bus_remove_driver+0xc4/0xf4) [ 4809.312973] [<c02c5a98>] (driver_unregister+0x70/0x7c) [ 4809.323220] [<c03809c4>] (sdio_unregister_driver+0x24/0x2c) [ 4809.334213] [<bf0df458>] (wl1271_exit+0x14/0x1c [wlcore_sdio]) [ 4809.344930] [<c009b1a4>] (sys_delete_module+0x228/0x2a8) [ 4809.354734] ---[ end trace 515290ccf5feb522 ]--- Rename ieee80211_mgd_teardown() to ieee80211_mgd_stop(), and call it on ieee80211_do_stop(). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23 19:45:15 +08:00
} else if (sdata->vif.type == NL80211_IFTYPE_STATION) {
ieee80211_mgd_stop(sdata);
}
if (going_down)
local->open_count--;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
list_del(&sdata->u.vlan.list);
/* no need to tell driver */
break;
case NL80211_IFTYPE_MONITOR:
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
local->cooked_mntrs--;
break;
}
local->monitors--;
if (local->monitors == 0) {
local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
ieee80211_del_virtual_monitor(local);
}
ieee80211_adjust_monitor_flags(sdata, -1);
ieee80211_configure_filter(local);
break;
default:
flush_work(&sdata->work);
/*
* When we get here, the interface is marked down.
* Call synchronize_rcu() to wait for the RX path
* should it be using the interface and enqueuing
* frames at this very time on another CPU.
*/
synchronize_rcu();
skb_queue_purge(&sdata->skb_queue);
/*
* Disable beaconing here for mesh only, AP and IBSS
* are already taken care of.
*/
if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_ENABLED);
/*
* Free all remaining keys, there shouldn't be any,
* except maybe group keys in AP more or WDS?
*/
ieee80211_free_keys(sdata);
if (going_down)
drv_remove_interface(local, sdata);
}
sdata->bss = NULL;
mutex_lock(&local->mtx);
mac80211: tell driver when idle When we aren't doing anything in mac80211, we can turn off much of the hardware, depending on the driver/hw. Not doing anything, aka being idle, means: * no monitor interfaces * no AP/mesh/wds interfaces * any station interfaces are in DISABLED state * any IBSS interfaces aren't trying to be in a network * we aren't trying to scan By creating a new function that verifies these conditions and calling it at strategic points where the states of those conditions change, we can easily make mac80211 tell the driver when we are idle to save power. Additionally, this fixes a small quirk where a recalculated powersave state is passed to the driver even if the hardware is about to stopped completely. This patch intentionally doesn't touch radio_enabled because that is currently implemented to be a soft rfkill which is inappropriate here when we need to be able to wake up with low latency. One thing I'm not entirely sure about is this: phy0: device no longer idle - in use wlan0: direct probe to AP 00:11:24:91:07:4d try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:11:24:91:07:4d wlan0: authenticated > phy0: device now idle > phy0: device no longer idle - in use wlan0: associate with AP 00:11:24:91:07:4d wlan0: RX AssocResp from 00:11:24:91:07:4d (capab=0x401 status=0 aid=1) wlan0: associated Is it appropriate to go into idle state for a short time when we have just authenticated, but not associated yet? This happens only with the userspace SME, because we cannot really know how long it will wait before asking us to associate. Would going idle after a short timeout be more appropriate? We may need to revisit this, depending on what happens. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-29 18:26:17 +08:00
hw_reconf_flags |= __ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
mac80211: tell driver when idle When we aren't doing anything in mac80211, we can turn off much of the hardware, depending on the driver/hw. Not doing anything, aka being idle, means: * no monitor interfaces * no AP/mesh/wds interfaces * any station interfaces are in DISABLED state * any IBSS interfaces aren't trying to be in a network * we aren't trying to scan By creating a new function that verifies these conditions and calling it at strategic points where the states of those conditions change, we can easily make mac80211 tell the driver when we are idle to save power. Additionally, this fixes a small quirk where a recalculated powersave state is passed to the driver even if the hardware is about to stopped completely. This patch intentionally doesn't touch radio_enabled because that is currently implemented to be a soft rfkill which is inappropriate here when we need to be able to wake up with low latency. One thing I'm not entirely sure about is this: phy0: device no longer idle - in use wlan0: direct probe to AP 00:11:24:91:07:4d try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:11:24:91:07:4d wlan0: authenticated > phy0: device now idle > phy0: device no longer idle - in use wlan0: associate with AP 00:11:24:91:07:4d wlan0: RX AssocResp from 00:11:24:91:07:4d (capab=0x401 status=0 aid=1) wlan0: associated Is it appropriate to go into idle state for a short time when we have just authenticated, but not associated yet? This happens only with the userspace SME, because we cannot really know how long it will wait before asking us to associate. Would going idle after a short timeout be more appropriate? We may need to revisit this, depending on what happens. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-29 18:26:17 +08:00
ieee80211_recalc_ps(local, -1);
if (local->open_count == 0) {
if (local->ops->napi_poll)
napi_disable(&local->napi);
ieee80211_clear_tx_pending(local);
ieee80211_stop_device(local);
/* no reconfiguring after stop! */
hw_reconf_flags = 0;
}
/* Re-calculate channel-type, in case there are multiple vifs
* on different channel types.
*/
orig_ct = local->_oper_channel_type;
ieee80211_set_channel_type(local, NULL, NL80211_CHAN_NO_HT);
/* do after stop to avoid reconfiguring when we stop anyway */
if (hw_reconf_flags || (orig_ct != local->_oper_channel_type))
ieee80211_hw_config(local, hw_reconf_flags);
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
skb_queue_walk_safe(&local->pending[i], skb, tmp) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (info->control.vif == &sdata->vif) {
__skb_unlink(skb, &local->pending[i]);
dev_kfree_skb_irq(skb);
}
}
}
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
if (local->monitors == local->open_count && local->monitors > 0)
ieee80211_add_virtual_monitor(local);
}
static int ieee80211_stop(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ieee80211_do_stop(sdata, true);
return 0;
}
static void ieee80211_set_multicast_list(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
int allmulti, promisc, sdata_allmulti, sdata_promisc;
allmulti = !!(dev->flags & IFF_ALLMULTI);
promisc = !!(dev->flags & IFF_PROMISC);
sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
if (allmulti != sdata_allmulti) {
if (dev->flags & IFF_ALLMULTI)
atomic_inc(&local->iff_allmultis);
else
atomic_dec(&local->iff_allmultis);
sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
}
if (promisc != sdata_promisc) {
if (dev->flags & IFF_PROMISC)
atomic_inc(&local->iff_promiscs);
else
atomic_dec(&local->iff_promiscs);
sdata->flags ^= IEEE80211_SDATA_PROMISC;
}
spin_lock_bh(&local->filter_lock);
__hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len);
spin_unlock_bh(&local->filter_lock);
ieee80211_queue_work(&local->hw, &local->reconfig_filter);
}
/*
* Called when the netdev is removed or, by the code below, before
* the interface type changes.
*/
static void ieee80211_teardown_sdata(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
int flushed;
int i;
/* free extra data */
ieee80211_free_keys(sdata);
ieee80211_debugfs_remove_netdev(sdata);
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
__skb_queue_purge(&sdata->fragments[i].skb_list);
sdata->fragment_next = 0;
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 05:01:55 +08:00
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_rmc_free(sdata);
flushed = sta_info_flush(local, sdata);
WARN_ON(flushed);
}
static u16 ieee80211_netdev_select_queue(struct net_device *dev,
struct sk_buff *skb)
{
return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
}
static const struct net_device_ops ieee80211_dataif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
.ndo_uninit = ieee80211_teardown_sdata,
.ndo_start_xmit = ieee80211_subif_start_xmit,
.ndo_set_rx_mode = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = ieee80211_change_mac,
.ndo_select_queue = ieee80211_netdev_select_queue,
};
static u16 ieee80211_monitor_select_queue(struct net_device *dev,
struct sk_buff *skb)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee80211_hdr *hdr;
struct ieee80211_radiotap_header *rtap = (void *)skb->data;
if (local->hw.queues < IEEE80211_NUM_ACS)
return 0;
if (skb->len < 4 ||
skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
return 0; /* doesn't matter, frame will be dropped */
hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
return ieee80211_select_queue_80211(sdata, skb, hdr);
}
static const struct net_device_ops ieee80211_monitorif_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
.ndo_uninit = ieee80211_teardown_sdata,
.ndo_start_xmit = ieee80211_monitor_start_xmit,
.ndo_set_rx_mode = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_select_queue = ieee80211_monitor_select_queue,
};
static void ieee80211_if_setup(struct net_device *dev)
{
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->netdev_ops = &ieee80211_dataif_ops;
dev->destructor = free_netdev;
}
static void ieee80211_iface_work(struct work_struct *work)
{
struct ieee80211_sub_if_data *sdata =
container_of(work, struct ieee80211_sub_if_data, work);
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct sta_info *sta;
struct ieee80211_ra_tid *ra_tid;
if (!ieee80211_sdata_running(sdata))
return;
if (local->scanning)
return;
/*
* ieee80211_queue_work() should have picked up most cases,
* here we'll pick the rest.
*/
if (WARN(local->suspended,
"interface work scheduled while going to suspend\n"))
return;
/* first process frames */
while ((skb = skb_dequeue(&sdata->skb_queue))) {
struct ieee80211_mgmt *mgmt = (void *)skb->data;
if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) {
ra_tid = (void *)&skb->cb;
ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra,
ra_tid->tid);
} else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) {
ra_tid = (void *)&skb->cb;
ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra,
ra_tid->tid);
} else if (ieee80211_is_action(mgmt->frame_control) &&
mgmt->u.action.category == WLAN_CATEGORY_BACK) {
int len = skb->len;
mutex_lock(&local->sta_mtx);
sta = sta_info_get_bss(sdata, mgmt->sa);
if (sta) {
switch (mgmt->u.action.u.addba_req.action_code) {
case WLAN_ACTION_ADDBA_REQ:
ieee80211_process_addba_request(
local, sta, mgmt, len);
break;
case WLAN_ACTION_ADDBA_RESP:
ieee80211_process_addba_resp(local, sta,
mgmt, len);
break;
case WLAN_ACTION_DELBA:
ieee80211_process_delba(sdata, sta,
mgmt, len);
break;
default:
WARN_ON(1);
break;
}
}
mutex_unlock(&local->sta_mtx);
} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
struct ieee80211_hdr *hdr = (void *)mgmt;
/*
* So the frame isn't mgmt, but frame_control
* is at the right place anyway, of course, so
* the if statement is correct.
*
* Warn if we have other data frame types here,
* they must not get here.
*/
WARN_ON(hdr->frame_control &
cpu_to_le16(IEEE80211_STYPE_NULLFUNC));
WARN_ON(!(hdr->seq_ctrl &
cpu_to_le16(IEEE80211_SCTL_FRAG)));
/*
* This was a fragment of a frame, received while
* a block-ack session was active. That cannot be
* right, so terminate the session.
*/
mutex_lock(&local->sta_mtx);
sta = sta_info_get_bss(sdata, mgmt->sa);
if (sta) {
u16 tid = *ieee80211_get_qos_ctl(hdr) &
IEEE80211_QOS_CTL_TID_MASK;
__ieee80211_stop_rx_ba_session(
sta, tid, WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_REQUIRE_SETUP,
true);
}
mutex_unlock(&local->sta_mtx);
} else switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
ieee80211_sta_rx_queued_mgmt(sdata, skb);
break;
case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_rx_queued_mgmt(sdata, skb);
break;
case NL80211_IFTYPE_MESH_POINT:
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
ieee80211_mesh_rx_queued_mgmt(sdata, skb);
break;
default:
WARN(1, "frame for unexpected interface type");
break;
}
kfree_skb(skb);
}
/* then other type-dependent work */
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
ieee80211_sta_work(sdata);
break;
case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_work(sdata);
break;
case NL80211_IFTYPE_MESH_POINT:
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
ieee80211_mesh_work(sdata);
break;
default:
break;
}
}
/*
* Helper function to initialise an interface to a specific type.
*/
static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
/* clear type-dependent union */
memset(&sdata->u, 0, sizeof(sdata->u));
/* and set some type-dependent values */
sdata->vif.type = type;
sdata->vif.p2p = false;
sdata->dev->netdev_ops = &ieee80211_dataif_ops;
sdata->wdev.iftype = type;
sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE);
sdata->control_port_no_encrypt = false;
sdata->noack_map = 0;
/* only monitor differs */
sdata->dev->type = ARPHRD_ETHER;
skb_queue_head_init(&sdata->skb_queue);
INIT_WORK(&sdata->work, ieee80211_iface_work);
switch (type) {
case NL80211_IFTYPE_P2P_GO:
type = NL80211_IFTYPE_AP;
sdata->vif.type = type;
sdata->vif.p2p = true;
/* fall through */
case NL80211_IFTYPE_AP:
skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
INIT_LIST_HEAD(&sdata->u.ap.vlans);
break;
case NL80211_IFTYPE_P2P_CLIENT:
type = NL80211_IFTYPE_STATION;
sdata->vif.type = type;
sdata->vif.p2p = true;
/* fall through */
case NL80211_IFTYPE_STATION:
ieee80211_sta_setup_sdata(sdata);
break;
case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_setup_sdata(sdata);
break;
case NL80211_IFTYPE_MESH_POINT:
if (ieee80211_vif_is_mesh(&sdata->vif))
ieee80211_mesh_init_sdata(sdata);
break;
case NL80211_IFTYPE_MONITOR:
sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
MONITOR_FLAG_OTHER_BSS;
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
BUG();
break;
}
ieee80211_debugfs_add_netdev(sdata);
}
static void ieee80211_clean_sdata(struct ieee80211_sub_if_data *sdata)
{
switch (sdata->vif.type) {
case NL80211_IFTYPE_MESH_POINT:
mesh_path_flush_by_iface(sdata);
break;
default:
break;
}
}
static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
struct ieee80211_local *local = sdata->local;
int ret, err;
enum nl80211_iftype internal_type = type;
bool p2p = false;
ASSERT_RTNL();
if (!local->ops->change_interface)
return -EBUSY;
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
/*
* Could maybe also all others here?
* Just not sure how that interacts
* with the RX/config path e.g. for
* mesh.
*/
break;
default:
return -EBUSY;
}
switch (type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
/*
* Could probably support everything
* but WDS here (WDS do_open can fail
* under memory pressure, which this
* code isn't prepared to handle).
*/
break;
case NL80211_IFTYPE_P2P_CLIENT:
p2p = true;
internal_type = NL80211_IFTYPE_STATION;
break;
case NL80211_IFTYPE_P2P_GO:
p2p = true;
internal_type = NL80211_IFTYPE_AP;
break;
default:
return -EBUSY;
}
ret = ieee80211_check_concurrent_iface(sdata, internal_type);
if (ret)
return ret;
ieee80211_do_stop(sdata, false);
ieee80211_teardown_sdata(sdata->dev);
ret = drv_change_interface(local, sdata, internal_type, p2p);
if (ret)
type = sdata->vif.type;
/*
* Ignore return value here, there's not much we can do since
* the driver changed the interface type internally already.
* The warnings will hopefully make driver authors fix it :-)
*/
ieee80211_check_queues(sdata);
ieee80211_setup_sdata(sdata, type);
err = ieee80211_do_open(sdata->dev, false);
WARN(err, "type change: do_open returned %d", err);
return ret;
}
int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
int ret;
ASSERT_RTNL();
if (type == ieee80211_vif_type_p2p(&sdata->vif))
return 0;
/* Setting ad-hoc mode on non-IBSS channel is not supported. */
if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
type == NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
if (ieee80211_sdata_running(sdata)) {
ret = ieee80211_runtime_change_iftype(sdata, type);
if (ret)
return ret;
} else {
/* Purge and reset type-dependent state. */
ieee80211_teardown_sdata(sdata->dev);
ieee80211_setup_sdata(sdata, type);
}
/* reset some values that shouldn't be kept across type changes */
sdata->vif.bss_conf.basic_rates =
ieee80211_mandatory_rates(sdata->local,
sdata->local->hw.conf.channel->band);
sdata->drop_unencrypted = 0;
if (type == NL80211_IFTYPE_STATION)
sdata->u.mgd.use_4addr = false;
return 0;
}
static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
struct net_device *dev,
enum nl80211_iftype type)
{
struct ieee80211_sub_if_data *sdata;
u64 mask, start, addr, val, inc;
u8 *m;
u8 tmp_addr[ETH_ALEN];
int i;
/* default ... something at least */
memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
if (is_zero_ether_addr(local->hw.wiphy->addr_mask) &&
local->hw.wiphy->n_addresses <= 1)
return;
mutex_lock(&local->iflist_mtx);
switch (type) {
case NL80211_IFTYPE_MONITOR:
/* doesn't matter */
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
/* match up with an AP interface */
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type != NL80211_IFTYPE_AP)
continue;
memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN);
break;
}
/* keep default if no AP interface present */
break;
default:
/* assign a new address if possible -- try n_addresses first */
for (i = 0; i < local->hw.wiphy->n_addresses; i++) {
bool used = false;
list_for_each_entry(sdata, &local->interfaces, list) {
if (memcmp(local->hw.wiphy->addresses[i].addr,
sdata->vif.addr, ETH_ALEN) == 0) {
used = true;
break;
}
}
if (!used) {
memcpy(dev->perm_addr,
local->hw.wiphy->addresses[i].addr,
ETH_ALEN);
break;
}
}
/* try mask if available */
if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
break;
m = local->hw.wiphy->addr_mask;
mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
if (__ffs64(mask) + hweight64(mask) != fls64(mask)) {
/* not a contiguous mask ... not handled now! */
pr_info("not contiguous\n");
break;
}
m = local->hw.wiphy->perm_addr;
start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
inc = 1ULL<<__ffs64(mask);
val = (start & mask);
addr = (start & ~mask) | (val & mask);
do {
bool used = false;
tmp_addr[5] = addr >> 0*8;
tmp_addr[4] = addr >> 1*8;
tmp_addr[3] = addr >> 2*8;
tmp_addr[2] = addr >> 3*8;
tmp_addr[1] = addr >> 4*8;
tmp_addr[0] = addr >> 5*8;
val += inc;
list_for_each_entry(sdata, &local->interfaces, list) {
if (memcmp(tmp_addr, sdata->vif.addr,
ETH_ALEN) == 0) {
used = true;
break;
}
}
if (!used) {
memcpy(dev->perm_addr, tmp_addr, ETH_ALEN);
break;
}
addr = (start & ~mask) | (val & mask);
} while (addr != start);
break;
}
mutex_unlock(&local->iflist_mtx);
}
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
struct wireless_dev **new_wdev, enum nl80211_iftype type,
struct vif_params *params)
{
struct net_device *ndev;
struct ieee80211_sub_if_data *sdata = NULL;
int ret, i;
int txqs = 1;
ASSERT_RTNL();
if (local->hw.queues >= IEEE80211_NUM_ACS)
txqs = IEEE80211_NUM_ACS;
ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size,
name, ieee80211_if_setup, txqs, 1);
if (!ndev)
return -ENOMEM;
dev_net_set(ndev, wiphy_net(local->hw.wiphy));
ndev->needed_headroom = local->tx_headroom +
4*6 /* four MAC addresses */
+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
+ 6 /* mesh */
+ 8 /* rfc1042/bridge tunnel */
- ETH_HLEN /* ethernet hard_header_len */
+ IEEE80211_ENCRYPT_HEADROOM;
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
ret = dev_alloc_name(ndev, ndev->name);
if (ret < 0)
goto fail;
ieee80211_assign_perm_addr(local, ndev, type);
memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
sdata = netdev_priv(ndev);
ndev->ieee80211_ptr = &sdata->wdev;
memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
memcpy(sdata->name, ndev->name, IFNAMSIZ);
/* initialise type-independent data */
sdata->wdev.wiphy = local->hw.wiphy;
sdata->local = local;
sdata->dev = ndev;
mac80211: Fix circular locking dependency in ARP filter handling There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-09 18:43:26 +08:00
#ifdef CONFIG_INET
sdata->arp_filter_state = true;
#endif
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
skb_queue_head_init(&sdata->fragments[i].skb_list);
INIT_LIST_HEAD(&sdata->key_list);
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[i];
sdata->rc_rateidx_mask[i] =
sband ? (1 << sband->n_bitrates) - 1 : 0;
if (sband)
memcpy(sdata->rc_rateidx_mcs_mask[i],
sband->ht_cap.mcs.rx_mask,
sizeof(sdata->rc_rateidx_mcs_mask[i]));
else
memset(sdata->rc_rateidx_mcs_mask[i], 0,
sizeof(sdata->rc_rateidx_mcs_mask[i]));
}
ieee80211_set_default_queues(sdata);
/* setup type-dependent data */
ieee80211_setup_sdata(sdata, type);
if (params) {
ndev->ieee80211_ptr->use_4addr = params->use_4addr;
if (type == NL80211_IFTYPE_STATION)
sdata->u.mgd.use_4addr = params->use_4addr;
}
ndev->features |= local->hw.netdev_features;
ret = register_netdevice(ndev);
if (ret)
goto fail;
mutex_lock(&local->iflist_mtx);
list_add_tail_rcu(&sdata->list, &local->interfaces);
mutex_unlock(&local->iflist_mtx);
if (new_wdev)
*new_wdev = &sdata->wdev;
return 0;
fail:
free_netdev(ndev);
return ret;
}
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
{
ASSERT_RTNL();
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 05:01:55 +08:00
mutex_lock(&sdata->local->iflist_mtx);
list_del_rcu(&sdata->list);
mutex_unlock(&sdata->local->iflist_mtx);
/* clean up type-dependent data */
ieee80211_clean_sdata(sdata);
synchronize_rcu();
unregister_netdevice(sdata->dev);
}
/*
* Remove all interfaces, may only be called at hardware unregistration
* time because it doesn't do RCU-safe list removals.
*/
void ieee80211_remove_interfaces(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata, *tmp;
LIST_HEAD(unreg_list);
ASSERT_RTNL();
mutex_lock(&local->iflist_mtx);
list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
list_del(&sdata->list);
ieee80211_clean_sdata(sdata);
unregister_netdevice_queue(sdata->dev, &unreg_list);
}
mutex_unlock(&local->iflist_mtx);
unregister_netdevice_many(&unreg_list);
list_del(&unreg_list);
}
mac80211: tell driver when idle When we aren't doing anything in mac80211, we can turn off much of the hardware, depending on the driver/hw. Not doing anything, aka being idle, means: * no monitor interfaces * no AP/mesh/wds interfaces * any station interfaces are in DISABLED state * any IBSS interfaces aren't trying to be in a network * we aren't trying to scan By creating a new function that verifies these conditions and calling it at strategic points where the states of those conditions change, we can easily make mac80211 tell the driver when we are idle to save power. Additionally, this fixes a small quirk where a recalculated powersave state is passed to the driver even if the hardware is about to stopped completely. This patch intentionally doesn't touch radio_enabled because that is currently implemented to be a soft rfkill which is inappropriate here when we need to be able to wake up with low latency. One thing I'm not entirely sure about is this: phy0: device no longer idle - in use wlan0: direct probe to AP 00:11:24:91:07:4d try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:11:24:91:07:4d wlan0: authenticated > phy0: device now idle > phy0: device no longer idle - in use wlan0: associate with AP 00:11:24:91:07:4d wlan0: RX AssocResp from 00:11:24:91:07:4d (capab=0x401 status=0 aid=1) wlan0: associated Is it appropriate to go into idle state for a short time when we have just authenticated, but not associated yet? This happens only with the userspace SME, because we cannot really know how long it will wait before asking us to associate. Would going idle after a short timeout be more appropriate? We may need to revisit this, depending on what happens. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-29 18:26:17 +08:00
static int netdev_notify(struct notifier_block *nb,
unsigned long state,
void *ndev)
{
struct net_device *dev = ndev;
struct ieee80211_sub_if_data *sdata;
if (state != NETDEV_CHANGENAME)
return 0;
if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy)
return 0;
if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid)
return 0;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
memcpy(sdata->name, dev->name, IFNAMSIZ);
ieee80211_debugfs_rename_netdev(sdata);
return 0;
}
static struct notifier_block mac80211_netdev_notifier = {
.notifier_call = netdev_notify,
};
int ieee80211_iface_init(void)
{
return register_netdevice_notifier(&mac80211_netdev_notifier);
}
void ieee80211_iface_exit(void)
{
unregister_netdevice_notifier(&mac80211_netdev_notifier);
}