License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
/*
|
|
|
|
* Scheduler internal types and methods:
|
|
|
|
*/
|
2022-02-22 21:50:43 +08:00
|
|
|
#ifndef _KERNEL_SCHED_SCHED_H
|
|
|
|
#define _KERNEL_SCHED_SCHED_H
|
2018-03-03 19:20:47 +08:00
|
|
|
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/sched/affinity.h>
|
2017-02-04 06:15:21 +08:00
|
|
|
#include <linux/sched/autogroup.h>
|
2017-02-09 01:51:31 +08:00
|
|
|
#include <linux/sched/cpufreq.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/sched/deadline.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/sched.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/sched/loadavg.h>
|
|
|
|
#include <linux/sched/mm.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/sched/rseq_api.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/sched/signal.h>
|
2018-11-26 02:33:38 +08:00
|
|
|
#include <linux/sched/smt.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/sched/stat.h>
|
|
|
|
#include <linux/sched/sysctl.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/sched/task_flags.h>
|
2017-02-09 01:51:36 +08:00
|
|
|
#include <linux/sched/task.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/sched/topology.h>
|
2017-02-09 01:51:36 +08:00
|
|
|
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/atomic.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/bitmap.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/bug.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/capability.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/cgroup_api.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/cgroup.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/cpufreq.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/cpumask_api.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/ctype.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/file.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/fs_api.h>
|
2022-02-22 20:46:03 +08:00
|
|
|
#include <linux/hrtimer_api.h>
|
|
|
|
#include <linux/interrupt.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/irq_work.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <linux/kref_api.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/kthread.h>
|
2022-02-22 20:46:03 +08:00
|
|
|
#include <linux/ktime_api.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/lockdep_api.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/lockdep.h>
|
|
|
|
#include <linux/minmax.h>
|
|
|
|
#include <linux/mm.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/mutex_api.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/plist.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/poll.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/proc_fs.h>
|
|
|
|
#include <linux/profile.h>
|
psi: pressure stall information for CPU, memory, and IO
When systems are overcommitted and resources become contended, it's hard
to tell exactly the impact this has on workload productivity, or how close
the system is to lockups and OOM kills. In particular, when machines work
multiple jobs concurrently, the impact of overcommit in terms of latency
and throughput on the individual job can be enormous.
In order to maximize hardware utilization without sacrificing individual
job health or risk complete machine lockups, this patch implements a way
to quantify resource pressure in the system.
A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that
expose the percentage of time the system is stalled on CPU, memory, or IO,
respectively. Stall states are aggregate versions of the per-task delay
accounting delays:
cpu: some tasks are runnable but not executing on a CPU
memory: tasks are reclaiming, or waiting for swapin or thrashing cache
io: tasks are waiting for io completions
These percentages of walltime can be thought of as pressure percentages,
and they give a general sense of system health and productivity loss
incurred by resource overcommit. They can also indicate when the system
is approaching lockup scenarios and OOMs.
To do this, psi keeps track of the task states associated with each CPU
and samples the time they spend in stall states. Every 2 seconds, the
samples are averaged across CPUs - weighted by the CPUs' non-idle time to
eliminate artifacts from unused CPUs - and translated into percentages of
walltime. A running average of those percentages is maintained over 10s,
1m, and 5m periods (similar to the loadaverage).
[hannes@cmpxchg.org: doc fixlet, per Randy]
Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org
[hannes@cmpxchg.org: code optimization]
Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org
[hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter]
Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org
[hannes@cmpxchg.org: fix build]
Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org
Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:27 +08:00
|
|
|
#include <linux/psi.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/rcupdate.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/seq_file.h>
|
|
|
|
#include <linux/seqlock.h>
|
2022-02-22 20:46:03 +08:00
|
|
|
#include <linux/softirq.h>
|
|
|
|
#include <linux/spinlock_api.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/static_key.h>
|
2011-10-25 16:00:11 +08:00
|
|
|
#include <linux/stop_machine.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/syscalls_api.h>
|
2018-03-03 19:20:47 +08:00
|
|
|
#include <linux/syscalls.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/tick.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/topology.h>
|
|
|
|
#include <linux/types.h>
|
2022-02-22 20:46:03 +08:00
|
|
|
#include <linux/u64_stats_sync_api.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <linux/wait_api.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <linux/wait_bit.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
#include <linux/workqueue_api.h>
|
|
|
|
|
|
|
|
#include <trace/events/power.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#include <trace/events/sched.h>
|
2022-02-22 20:23:24 +08:00
|
|
|
|
|
|
|
#include "../workqueue_internal.h"
|
|
|
|
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#ifdef CONFIG_CGROUP_SCHED
|
|
|
|
#include <linux/cgroup.h>
|
|
|
|
#include <linux/psi.h>
|
|
|
|
#endif
|
2018-03-03 19:20:47 +08:00
|
|
|
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
# include <linux/static_key.h>
|
|
|
|
#endif
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2017-02-02 21:47:27 +08:00
|
|
|
#ifdef CONFIG_PARAVIRT
|
2018-03-03 19:20:47 +08:00
|
|
|
# include <asm/paravirt.h>
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
# include <asm/paravirt_api_clock.h>
|
2017-02-02 21:47:27 +08:00
|
|
|
#endif
|
|
|
|
|
2011-11-16 00:14:39 +08:00
|
|
|
#include "cpupri.h"
|
2013-11-07 21:43:47 +08:00
|
|
|
#include "cpudeadline.h"
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2016-09-21 04:34:51 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
# define SCHED_WARN_ON(x) WARN_ONCE(x, #x)
|
2016-09-21 04:34:51 +08:00
|
|
|
#else
|
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
Remove all headers, except the ones required to make this header
build standalone.
Also include stats.h in sched.h explicitly - dependencies already
require this.
Summary of the build speedup gained through the last ~15 scheduler build &
header dependency patches:
Cumulative scheduler (kernel/sched/) build time speedup on a
Linux distribution's config, which enables all scheduler features,
compared to the vanilla kernel:
_____________________________________________________________________________
|
| Vanilla kernel (v5.13-rc7):
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% )
| 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% )
| 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% )
|
| 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% )
|_____________________________________________________________________________
|
| Patched kernel:
|_____________________________________________________________________________
|
| Performance counter stats for 'make -j96 kernel/sched/' (3 runs):
|
| 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% )
| 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% )
| 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% )
|
| 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% )
|_____________________________________________________________________________
Summary:
- CPU time used to build the scheduler dropped by -60.9%, a reduction
from 22.1 clock-seconds to 8.7 clock-seconds.
- Wall-clock time to build the scheduler dropped by -3.9%, a reduction
from 2.95 seconds to 2.84 seconds.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-22 21:51:58 +08:00
|
|
|
# define SCHED_WARN_ON(x) ({ (void)(x), 0; })
|
2016-09-21 04:34:51 +08:00
|
|
|
#endif
|
|
|
|
|
2013-04-20 03:10:49 +08:00
|
|
|
struct rq;
|
2014-09-04 23:32:09 +08:00
|
|
|
struct cpuidle_state;
|
2013-04-20 03:10:49 +08:00
|
|
|
|
2014-08-20 17:47:32 +08:00
|
|
|
/* task_struct::on_rq states: */
|
|
|
|
#define TASK_ON_RQ_QUEUED 1
|
sched: Teach scheduler to understand TASK_ON_RQ_MIGRATING state
This is a new p->on_rq state which will be used to indicate that a task
is in a process of migrating between two RQs. It allows to get
rid of double_rq_lock(), which we used to use to change a rq of
a queued task before.
Let's consider an example. To move a task between src_rq and
dst_rq we will do the following:
raw_spin_lock(&src_rq->lock);
/* p is a task which is queued on src_rq */
p = ...;
dequeue_task(src_rq, p, 0);
p->on_rq = TASK_ON_RQ_MIGRATING;
set_task_cpu(p, dst_cpu);
raw_spin_unlock(&src_rq->lock);
/*
* Both RQs are unlocked here.
* Task p is dequeued from src_rq
* but its on_rq value is not zero.
*/
raw_spin_lock(&dst_rq->lock);
p->on_rq = TASK_ON_RQ_QUEUED;
enqueue_task(dst_rq, p, 0);
raw_spin_unlock(&dst_rq->lock);
While p->on_rq is TASK_ON_RQ_MIGRATING, task is considered as
"migrating", and other parallel scheduler actions with it are
not available to parallel callers. The parallel caller is
spining till migration is completed.
The unavailable actions are changing of cpu affinity, changing
of priority etc, in other words all the functionality which used
to require task_rq(p)->lock before (and related to the task).
To implement TASK_ON_RQ_MIGRATING support we primarily are using
the following fact. Most of scheduler users (from which we are
protecting a migrating task) use task_rq_lock() and
__task_rq_lock() to get the lock of task_rq(p). These primitives
know that task's cpu may change, and they are spining while the
lock of the right RQ is not held. We add one more condition into
them, so they will be also spinning until the migration is
finished.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1408528062.23412.88.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-20 17:47:42 +08:00
|
|
|
#define TASK_ON_RQ_MIGRATING 2
|
2014-08-20 17:47:32 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
extern __read_mostly int scheduler_running;
|
|
|
|
|
2013-04-20 03:10:49 +08:00
|
|
|
extern unsigned long calc_load_update;
|
|
|
|
extern atomic_long_t calc_load_tasks;
|
|
|
|
|
2015-04-14 19:19:42 +08:00
|
|
|
extern void calc_global_load_tick(struct rq *this_rq);
|
2016-07-13 00:33:56 +08:00
|
|
|
extern long calc_load_fold_active(struct rq *this_rq, long adjust);
|
2015-04-14 19:19:42 +08:00
|
|
|
|
2020-06-30 03:23:03 +08:00
|
|
|
extern void call_trace_sched_update_nr_running(struct rq *rq, int count);
|
2011-10-25 16:00:11 +08:00
|
|
|
/*
|
|
|
|
* Helpers for converting nanosecond timing to jiffy resolution
|
|
|
|
*/
|
|
|
|
#define NS_TO_JIFFIES(TIME) ((unsigned long)(TIME) / (NSEC_PER_SEC / HZ))
|
|
|
|
|
2013-03-05 16:06:09 +08:00
|
|
|
/*
|
|
|
|
* Increase resolution of nice-level calculations for 64-bit architectures.
|
|
|
|
* The extra resolution improves shares distribution and load balancing of
|
|
|
|
* low-weight task groups (eg. nice +19 on an autogroup), deeper taskgroup
|
|
|
|
* hierarchies, especially on larger systems. This is not a user-visible change
|
|
|
|
* and does not change the user-interface for setting shares/weights.
|
|
|
|
*
|
|
|
|
* We increase resolution only if we have enough bits to allow this increased
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* resolution (i.e. 64-bit). The costs for increasing resolution when 32-bit
|
|
|
|
* are pretty high and the returns do not justify the increased costs.
|
2016-04-28 18:49:38 +08:00
|
|
|
*
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* Really only required when CONFIG_FAIR_GROUP_SCHED=y is also set, but to
|
|
|
|
* increase coverage and consistency always enable it on 64-bit platforms.
|
2013-03-05 16:06:09 +08:00
|
|
|
*/
|
2016-04-28 18:49:38 +08:00
|
|
|
#ifdef CONFIG_64BIT
|
2016-04-05 12:12:27 +08:00
|
|
|
# define NICE_0_LOAD_SHIFT (SCHED_FIXEDPOINT_SHIFT + SCHED_FIXEDPOINT_SHIFT)
|
sched/fair: Generalize the load/util averages resolution definition
Integer metric needs fixed point arithmetic. In sched/fair, a few
metrics, e.g., weight, load, load_avg, util_avg, freq, and capacity,
may have different fixed point ranges, which makes their update and
usage error-prone.
In order to avoid the errors relating to the fixed point range, we
definie a basic fixed point range, and then formalize all metrics to
base on the basic range.
The basic range is 1024 or (1 << 10). Further, one can recursively
apply the basic range to have larger range.
Pointed out by Ben Segall, weight (visible to user, e.g., NICE-0 has
1024) and load (e.g., NICE_0_LOAD) have independent ranges, but they
must be well calibrated.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: umgwanakikbuti@gmail.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1459829551-21625-2-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-05 12:12:26 +08:00
|
|
|
# define scale_load(w) ((w) << SCHED_FIXEDPOINT_SHIFT)
|
sched: Avoid scale real weight down to zero
During our testing, we found a case that shares no longer
working correctly, the cgroup topology is like:
/sys/fs/cgroup/cpu/A (shares=102400)
/sys/fs/cgroup/cpu/A/B (shares=2)
/sys/fs/cgroup/cpu/A/B/C (shares=1024)
/sys/fs/cgroup/cpu/D (shares=1024)
/sys/fs/cgroup/cpu/D/E (shares=1024)
/sys/fs/cgroup/cpu/D/E/F (shares=1024)
The same benchmark is running in group C & F, no other tasks are
running, the benchmark is capable to consumed all the CPUs.
We suppose the group C will win more CPU resources since it could
enjoy all the shares of group A, but it's F who wins much more.
The reason is because we have group B with shares as 2, since
A->cfs_rq.load.weight == B->se.load.weight == B->shares/nr_cpus,
so A->cfs_rq.load.weight become very small.
And in calc_group_shares() we calculate shares as:
load = max(scale_load_down(cfs_rq->load.weight), cfs_rq->avg.load_avg);
shares = (tg_shares * load) / tg_weight;
Since the 'cfs_rq->load.weight' is too small, the load become 0
after scale down, although 'tg_shares' is 102400, shares of the se
which stand for group A on root cfs_rq become 2.
While the se of D on root cfs_rq is far more bigger than 2, so it
wins the battle.
Thus when scale_load_down() scale real weight down to 0, it's no
longer telling the real story, the caller will have the wrong
information and the calculation will be buggy.
This patch add check in scale_load_down(), so the real weight will
be >= MIN_SHARES after scale, after applied the group C wins as
expected.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/38e8e212-59a1-64b2-b247-b6d0b52d8dc1@linux.alibaba.com
2020-03-18 10:15:15 +08:00
|
|
|
# define scale_load_down(w) \
|
|
|
|
({ \
|
|
|
|
unsigned long __w = (w); \
|
|
|
|
if (__w) \
|
|
|
|
__w = max(2UL, __w >> SCHED_FIXEDPOINT_SHIFT); \
|
|
|
|
__w; \
|
|
|
|
})
|
2013-03-05 16:06:09 +08:00
|
|
|
#else
|
2016-04-05 12:12:27 +08:00
|
|
|
# define NICE_0_LOAD_SHIFT (SCHED_FIXEDPOINT_SHIFT)
|
2013-03-05 16:06:09 +08:00
|
|
|
# define scale_load(w) (w)
|
|
|
|
# define scale_load_down(w) (w)
|
|
|
|
#endif
|
|
|
|
|
sched/fair: Generalize the load/util averages resolution definition
Integer metric needs fixed point arithmetic. In sched/fair, a few
metrics, e.g., weight, load, load_avg, util_avg, freq, and capacity,
may have different fixed point ranges, which makes their update and
usage error-prone.
In order to avoid the errors relating to the fixed point range, we
definie a basic fixed point range, and then formalize all metrics to
base on the basic range.
The basic range is 1024 or (1 << 10). Further, one can recursively
apply the basic range to have larger range.
Pointed out by Ben Segall, weight (visible to user, e.g., NICE-0 has
1024) and load (e.g., NICE_0_LOAD) have independent ranges, but they
must be well calibrated.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: umgwanakikbuti@gmail.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1459829551-21625-2-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-05 12:12:26 +08:00
|
|
|
/*
|
2016-04-05 12:12:27 +08:00
|
|
|
* Task weight (visible to users) and its load (invisible to users) have
|
|
|
|
* independent resolution, but they should be well calibrated. We use
|
|
|
|
* scale_load() and scale_load_down(w) to convert between them. The
|
|
|
|
* following must be true:
|
|
|
|
*
|
2021-01-28 21:10:39 +08:00
|
|
|
* scale_load(sched_prio_to_weight[NICE_TO_PRIO(0)-MAX_RT_PRIO]) == NICE_0_LOAD
|
2016-04-05 12:12:27 +08:00
|
|
|
*
|
sched/fair: Generalize the load/util averages resolution definition
Integer metric needs fixed point arithmetic. In sched/fair, a few
metrics, e.g., weight, load, load_avg, util_avg, freq, and capacity,
may have different fixed point ranges, which makes their update and
usage error-prone.
In order to avoid the errors relating to the fixed point range, we
definie a basic fixed point range, and then formalize all metrics to
base on the basic range.
The basic range is 1024 or (1 << 10). Further, one can recursively
apply the basic range to have larger range.
Pointed out by Ben Segall, weight (visible to user, e.g., NICE-0 has
1024) and load (e.g., NICE_0_LOAD) have independent ranges, but they
must be well calibrated.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: umgwanakikbuti@gmail.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1459829551-21625-2-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-05 12:12:26 +08:00
|
|
|
*/
|
2016-04-05 12:12:27 +08:00
|
|
|
#define NICE_0_LOAD (1L << NICE_0_LOAD_SHIFT)
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
/*
|
|
|
|
* Single value that decides SCHED_DEADLINE internal math precision.
|
|
|
|
* 10 -> just above 1us
|
|
|
|
* 9 -> just above 0.5us
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
#define DL_SCALE 10
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
/*
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* Single value that denotes runtime == period, ie unlimited time.
|
2011-10-25 16:00:11 +08:00
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
#define RUNTIME_INF ((u64)~0ULL)
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2015-09-09 23:00:41 +08:00
|
|
|
static inline int idle_policy(int policy)
|
|
|
|
{
|
|
|
|
return policy == SCHED_IDLE;
|
|
|
|
}
|
sched: Add new scheduler syscalls to support an extended scheduling parameters ABI
Add the syscalls needed for supporting scheduling algorithms
with extended scheduling parameters (e.g., SCHED_DEADLINE).
In general, it makes possible to specify a periodic/sporadic task,
that executes for a given amount of runtime at each instance, and is
scheduled according to the urgency of their own timing constraints,
i.e.:
- a (maximum/typical) instance execution time,
- a minimum interval between consecutive instances,
- a time constraint by which each instance must be completed.
Thus, both the data structure that holds the scheduling parameters of
the tasks and the system calls dealing with it must be extended.
Unfortunately, modifying the existing struct sched_param would break
the ABI and result in potentially serious compatibility issues with
legacy binaries.
For these reasons, this patch:
- defines the new struct sched_attr, containing all the fields
that are necessary for specifying a task in the computational
model described above;
- defines and implements the new scheduling related syscalls that
manipulate it, i.e., sched_setattr() and sched_getattr().
Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a
proof of concept and for developing and testing purposes. Making them
available on other architectures is straightforward.
Since no "user" for these new parameters is introduced in this patch,
the implementation of the new system calls is just identical to their
already existing counterpart. Future patches that implement scheduling
policies able to exploit the new data structure must also take care of
modifying the sched_*attr() calls accordingly with their own purposes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
[ Rewrote to use sched_attr. ]
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Removed sched_setscheduler2() for now. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:36 +08:00
|
|
|
static inline int fair_policy(int policy)
|
|
|
|
{
|
|
|
|
return policy == SCHED_NORMAL || policy == SCHED_BATCH;
|
|
|
|
}
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
static inline int rt_policy(int policy)
|
|
|
|
{
|
sched: Add new scheduler syscalls to support an extended scheduling parameters ABI
Add the syscalls needed for supporting scheduling algorithms
with extended scheduling parameters (e.g., SCHED_DEADLINE).
In general, it makes possible to specify a periodic/sporadic task,
that executes for a given amount of runtime at each instance, and is
scheduled according to the urgency of their own timing constraints,
i.e.:
- a (maximum/typical) instance execution time,
- a minimum interval between consecutive instances,
- a time constraint by which each instance must be completed.
Thus, both the data structure that holds the scheduling parameters of
the tasks and the system calls dealing with it must be extended.
Unfortunately, modifying the existing struct sched_param would break
the ABI and result in potentially serious compatibility issues with
legacy binaries.
For these reasons, this patch:
- defines the new struct sched_attr, containing all the fields
that are necessary for specifying a task in the computational
model described above;
- defines and implements the new scheduling related syscalls that
manipulate it, i.e., sched_setattr() and sched_getattr().
Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a
proof of concept and for developing and testing purposes. Making them
available on other architectures is straightforward.
Since no "user" for these new parameters is introduced in this patch,
the implementation of the new system calls is just identical to their
already existing counterpart. Future patches that implement scheduling
policies able to exploit the new data structure must also take care of
modifying the sched_*attr() calls accordingly with their own purposes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
[ Rewrote to use sched_attr. ]
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Removed sched_setscheduler2() for now. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:36 +08:00
|
|
|
return policy == SCHED_FIFO || policy == SCHED_RR;
|
2011-10-25 16:00:11 +08:00
|
|
|
}
|
|
|
|
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
static inline int dl_policy(int policy)
|
|
|
|
{
|
|
|
|
return policy == SCHED_DEADLINE;
|
|
|
|
}
|
2015-09-09 23:00:41 +08:00
|
|
|
static inline bool valid_policy(int policy)
|
|
|
|
{
|
|
|
|
return idle_policy(policy) || fair_policy(policy) ||
|
|
|
|
rt_policy(policy) || dl_policy(policy);
|
|
|
|
}
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
|
2018-11-05 19:21:55 +08:00
|
|
|
static inline int task_has_idle_policy(struct task_struct *p)
|
|
|
|
{
|
|
|
|
return idle_policy(p->policy);
|
|
|
|
}
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
static inline int task_has_rt_policy(struct task_struct *p)
|
|
|
|
{
|
|
|
|
return rt_policy(p->policy);
|
|
|
|
}
|
|
|
|
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
static inline int task_has_dl_policy(struct task_struct *p)
|
|
|
|
{
|
|
|
|
return dl_policy(p->policy);
|
|
|
|
}
|
|
|
|
|
2017-12-04 18:23:25 +08:00
|
|
|
#define cap_scale(v, s) ((v)*(s) >> SCHED_CAPACITY_SHIFT)
|
|
|
|
|
sched/fair: Align rq->avg_idle and rq->avg_scan_cost
sched/core.c uses update_avg() for rq->avg_idle and sched/fair.c uses an
open-coded version (with the exact same decay factor) for
rq->avg_scan_cost. On top of that, select_idle_cpu() expects to be able to
compare these two fields.
The only difference between the two is that rq->avg_scan_cost is computed
using a pure division rather than a shift. Turns out it actually matters,
first of all because the shifted value can be negative, and the standard
has this to say about it:
"""
The result of E1 >> E2 is E1 right-shifted E2 bit positions. [...] If E1
has a signed type and a negative value, the resulting value is
implementation-defined.
"""
Not only this, but (arithmetic) right shifting a negative value (using 2's
complement) is *not* equivalent to dividing it by the corresponding power
of 2. Let's look at a few examples:
-4 -> 0xF..FC
-4 >> 3 -> 0xF..FF == -1 != -4 / 8
-8 -> 0xF..F8
-8 >> 3 -> 0xF..FF == -1 == -8 / 8
-9 -> 0xF..F7
-9 >> 3 -> 0xF..FE == -2 != -9 / 8
Make update_avg() use a division, and export it to the private scheduler
header to reuse it where relevant. Note that this still lets compilers use
a shift here, but should prevent any unwanted surprise. The disassembly of
select_idle_cpu() remains unchanged on arm64, and ttwu_do_wakeup() gains 2
instructions; the diff sort of looks like this:
- sub x1, x1, x0
+ subs x1, x1, x0 // set condition codes
+ add x0, x1, #0x7
+ csel x0, x0, x1, mi // x0 = x1 < 0 ? x0 : x1
add x0, x3, x0, asr #3
which does the right thing (i.e. gives us the expected result while still
using an arithmetic shift)
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200330090127.16294-1-valentin.schneider@arm.com
2020-03-30 17:01:27 +08:00
|
|
|
static inline void update_avg(u64 *avg, u64 sample)
|
|
|
|
{
|
|
|
|
s64 diff = sample - *avg;
|
|
|
|
*avg += diff / 8;
|
|
|
|
}
|
|
|
|
|
sched/fair: Fix shift-out-of-bounds in load_balance()
Syzbot reported a handful of occurrences where an sd->nr_balance_failed can
grow to much higher values than one would expect.
A successful load_balance() resets it to 0; a failed one increments
it. Once it gets to sd->cache_nice_tries + 3, this *should* trigger an
active balance, which will either set it to sd->cache_nice_tries+1 or reset
it to 0. However, in case the to-be-active-balanced task is not allowed to
run on env->dst_cpu, then the increment is done without any further
modification.
This could then be repeated ad nauseam, and would explain the absurdly high
values reported by syzbot (86, 149). VincentG noted there is value in
letting sd->cache_nice_tries grow, so the shift itself should be
fixed. That means preventing:
"""
If the value of the right operand is negative or is greater than or equal
to the width of the promoted left operand, the behavior is undefined.
"""
Thus we need to cap the shift exponent to
BITS_PER_TYPE(typeof(lefthand)) - 1.
I had a look around for other similar cases via coccinelle:
@expr@
position pos;
expression E1;
expression E2;
@@
(
E1 >> E2@pos
|
E1 >> E2@pos
)
@cst depends on expr@
position pos;
expression expr.E1;
constant cst;
@@
(
E1 >> cst@pos
|
E1 << cst@pos
)
@script:python depends on !cst@
pos << expr.pos;
exp << expr.E2;
@@
# Dirty hack to ignore constexpr
if exp.upper() != exp:
coccilib.report.print_report(pos[0], "Possible UB shift here")
The only other match in kernel/sched is rq_clock_thermal() which employs
sched_thermal_decay_shift, and that exponent is already capped to 10, so
that one is fine.
Fixes: 5a7f55590467 ("sched/fair: Relax constraint on task's load during load balance")
Reported-by: syzbot+d7581744d5fd27c9fbe1@syzkaller.appspotmail.com
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lore.kernel.org/r/000000000000ffac1205b9a2112f@google.com
2021-02-26 01:56:56 +08:00
|
|
|
/*
|
|
|
|
* Shifting a value by an exponent greater *or equal* to the size of said value
|
|
|
|
* is UB; cap at size-1.
|
|
|
|
*/
|
|
|
|
#define shr_bound(val, shift) \
|
|
|
|
(val >> min_t(typeof(shift), shift, BITS_PER_TYPE(typeof(val)) - 1))
|
|
|
|
|
2017-12-04 18:23:20 +08:00
|
|
|
/*
|
|
|
|
* !! For sched_setattr_nocheck() (kernel) only !!
|
|
|
|
*
|
|
|
|
* This is actually gross. :(
|
|
|
|
*
|
|
|
|
* It is used to make schedutil kworker(s) higher priority than SCHED_DEADLINE
|
|
|
|
* tasks, but still be able to sleep. We need this on platforms that cannot
|
|
|
|
* atomically change clock frequency. Remove once fast switching will be
|
|
|
|
* available on such platforms.
|
|
|
|
*
|
|
|
|
* SUGOV stands for SchedUtil GOVernor.
|
|
|
|
*/
|
|
|
|
#define SCHED_FLAG_SUGOV 0x10000000
|
|
|
|
|
2021-07-27 18:11:01 +08:00
|
|
|
#define SCHED_DL_FLAGS (SCHED_FLAG_RECLAIM | SCHED_FLAG_DL_OVERRUN | SCHED_FLAG_SUGOV)
|
|
|
|
|
2017-12-04 18:23:20 +08:00
|
|
|
static inline bool dl_entity_is_special(struct sched_dl_entity *dl_se)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL
|
|
|
|
return unlikely(dl_se->flags & SCHED_FLAG_SUGOV);
|
|
|
|
#else
|
|
|
|
return false;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
sched/deadline: Add SCHED_DEADLINE inheritance logic
Some method to deal with rt-mutexes and make sched_dl interact with
the current PI-coded is needed, raising all but trivial issues, that
needs (according to us) to be solved with some restructuring of
the pi-code (i.e., going toward a proxy execution-ish implementation).
This is under development, in the meanwhile, as a temporary solution,
what this commits does is:
- ensure a pi-lock owner with waiters is never throttled down. Instead,
when it runs out of runtime, it immediately gets replenished and it's
deadline is postponed;
- the scheduling parameters (relative deadline and default runtime)
used for that replenishments --during the whole period it holds the
pi-lock-- are the ones of the waiting task with earliest deadline.
Acting this way, we provide some kind of boosting to the lock-owner,
still by using the existing (actually, slightly modified by the previous
commit) pi-architecture.
We would stress the fact that this is only a surely needed, all but
clean solution to the problem. In the end it's only a way to re-start
discussion within the community. So, as always, comments, ideas, rants,
etc.. are welcome! :-)
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Added !RT_MUTEXES build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:44 +08:00
|
|
|
/*
|
|
|
|
* Tells if entity @a should preempt entity @b.
|
|
|
|
*/
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
static inline bool
|
|
|
|
dl_entity_preempt(struct sched_dl_entity *a, struct sched_dl_entity *b)
|
sched/deadline: Add SCHED_DEADLINE inheritance logic
Some method to deal with rt-mutexes and make sched_dl interact with
the current PI-coded is needed, raising all but trivial issues, that
needs (according to us) to be solved with some restructuring of
the pi-code (i.e., going toward a proxy execution-ish implementation).
This is under development, in the meanwhile, as a temporary solution,
what this commits does is:
- ensure a pi-lock owner with waiters is never throttled down. Instead,
when it runs out of runtime, it immediately gets replenished and it's
deadline is postponed;
- the scheduling parameters (relative deadline and default runtime)
used for that replenishments --during the whole period it holds the
pi-lock-- are the ones of the waiting task with earliest deadline.
Acting this way, we provide some kind of boosting to the lock-owner,
still by using the existing (actually, slightly modified by the previous
commit) pi-architecture.
We would stress the fact that this is only a surely needed, all but
clean solution to the problem. In the end it's only a way to re-start
discussion within the community. So, as always, comments, ideas, rants,
etc.. are welcome! :-)
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Added !RT_MUTEXES build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:44 +08:00
|
|
|
{
|
2017-12-04 18:23:20 +08:00
|
|
|
return dl_entity_is_special(a) ||
|
|
|
|
dl_time_before(a->deadline, b->deadline);
|
sched/deadline: Add SCHED_DEADLINE inheritance logic
Some method to deal with rt-mutexes and make sched_dl interact with
the current PI-coded is needed, raising all but trivial issues, that
needs (according to us) to be solved with some restructuring of
the pi-code (i.e., going toward a proxy execution-ish implementation).
This is under development, in the meanwhile, as a temporary solution,
what this commits does is:
- ensure a pi-lock owner with waiters is never throttled down. Instead,
when it runs out of runtime, it immediately gets replenished and it's
deadline is postponed;
- the scheduling parameters (relative deadline and default runtime)
used for that replenishments --during the whole period it holds the
pi-lock-- are the ones of the waiting task with earliest deadline.
Acting this way, we provide some kind of boosting to the lock-owner,
still by using the existing (actually, slightly modified by the previous
commit) pi-architecture.
We would stress the fact that this is only a surely needed, all but
clean solution to the problem. In the end it's only a way to re-start
discussion within the community. So, as always, comments, ideas, rants,
etc.. are welcome! :-)
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Added !RT_MUTEXES build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:44 +08:00
|
|
|
}
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
/*
|
|
|
|
* This is the priority-queue data structure of the RT scheduling class:
|
|
|
|
*/
|
|
|
|
struct rt_prio_array {
|
|
|
|
DECLARE_BITMAP(bitmap, MAX_RT_PRIO+1); /* include 1 bit for delimiter */
|
|
|
|
struct list_head queue[MAX_RT_PRIO];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct rt_bandwidth {
|
|
|
|
/* nests inside the rq lock: */
|
|
|
|
raw_spinlock_t rt_runtime_lock;
|
|
|
|
ktime_t rt_period;
|
|
|
|
u64 rt_runtime;
|
|
|
|
struct hrtimer rt_period_timer;
|
sched,perf: Fix periodic timers
In the below two commits (see Fixes) we have periodic timers that can
stop themselves when they're no longer required, but need to be
(re)-started when their idle condition changes.
Further complications is that we want the timer handler to always do
the forward such that it will always correctly deal with the overruns,
and we do not want to race such that the handler has already decided
to stop, but the (external) restart sees the timer still active and we
end up with a 'lost' timer.
The problem with the current code is that the re-start can come before
the callback does the forward, at which point the forward from the
callback will WARN about forwarding an enqueued timer.
Now, conceptually its easy to detect if you're before or after the fwd
by comparing the expiration time against the current time. Of course,
that's expensive (and racy) because we don't have the current time.
Alternatively one could cache this state inside the timer, but then
everybody pays the overhead of maintaining this extra state, and that
is undesired.
The only other option that I could see is the external timer_active
variable, which I tried to kill before. I would love a nicer interface
for this seemingly simple 'problem' but alas.
Fixes: 272325c4821f ("perf: Fix mux_interval hrtimer wreckage")
Fixes: 77a4d1a1b9a1 ("sched: Cleanup bandwidth timers")
Cc: pjt@google.com
Cc: tglx@linutronix.de
Cc: klamm@yandex-team.ru
Cc: mingo@kernel.org
Cc: bsegall@google.com
Cc: hpa@zytor.com
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150514102311.GX21418@twins.programming.kicks-ass.net
2015-05-14 18:23:11 +08:00
|
|
|
unsigned int rt_period_active;
|
2011-10-25 16:00:11 +08:00
|
|
|
};
|
2014-09-19 17:22:39 +08:00
|
|
|
|
|
|
|
void __dl_clear_params(struct task_struct *p);
|
|
|
|
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
struct dl_bandwidth {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
raw_spinlock_t dl_runtime_lock;
|
|
|
|
u64 dl_runtime;
|
|
|
|
u64 dl_period;
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static inline int dl_bandwidth_enabled(void)
|
|
|
|
{
|
2013-12-17 19:44:49 +08:00
|
|
|
return sysctl_sched_rt_runtime >= 0;
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
}
|
|
|
|
|
sched/deadline: Fix sched_dl_global_validate()
When change sched_rt_{runtime, period}_us, we validate that the new
settings should at least accommodate the currently allocated -dl
bandwidth:
sched_rt_handler()
--> sched_dl_bandwidth_validate()
{
new_bw = global_rt_runtime()/global_rt_period();
for_each_possible_cpu(cpu) {
dl_b = dl_bw_of(cpu);
if (new_bw < dl_b->total_bw) <-------
ret = -EBUSY;
}
}
But under CONFIG_SMP, dl_bw is per root domain , but not per CPU,
dl_b->total_bw is the allocated bandwidth of the whole root domain.
Instead, we should compare dl_b->total_bw against "cpus*new_bw",
where 'cpus' is the number of CPUs of the root domain.
Also, below annotation(in kernel/sched/sched.h) implied implementation
only appeared in SCHED_DEADLINE v2[1], then deadline scheduler kept
evolving till got merged(v9), but the annotation remains unchanged,
meaningless and misleading, update it.
* With respect to SMP, the bandwidth is given on a per-CPU basis,
* meaning that:
* - dl_bw (< 100%) is the bandwidth of the system (group) on each CPU;
* - dl_total_bw array contains, in the i-eth element, the currently
* allocated bandwidth on the i-eth CPU.
[1]: https://lore.kernel.org/lkml/1267385230.13676.101.camel@Palantir/
Fixes: 332ac17ef5bf ("sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks")
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/db6bbda316048cda7a1bbc9571defde193a8d67e.1602171061.git.iwtbavbm@gmail.com
2020-10-08 23:49:42 +08:00
|
|
|
/*
|
|
|
|
* To keep the bandwidth of -deadline tasks under control
|
|
|
|
* we need some place where:
|
|
|
|
* - store the maximum -deadline bandwidth of each cpu;
|
|
|
|
* - cache the fraction of bandwidth that is currently allocated in
|
|
|
|
* each root domain;
|
|
|
|
*
|
|
|
|
* This is all done in the data structure below. It is similar to the
|
|
|
|
* one used for RT-throttling (rt_bandwidth), with the main difference
|
|
|
|
* that, since here we are only interested in admission control, we
|
|
|
|
* do not decrease any runtime while the group "executes", neither we
|
|
|
|
* need a timer to replenish it.
|
|
|
|
*
|
|
|
|
* With respect to SMP, bandwidth is given on a per root domain basis,
|
|
|
|
* meaning that:
|
|
|
|
* - bw (< 100%) is the deadline bandwidth of each CPU;
|
|
|
|
* - total_bw is the currently allocated bandwidth in each root domain;
|
|
|
|
*/
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
struct dl_bw {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
raw_spinlock_t lock;
|
|
|
|
u64 bw;
|
|
|
|
u64 total_bw;
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
};
|
|
|
|
|
2020-05-20 21:42:42 +08:00
|
|
|
/*
|
|
|
|
* Verify the fitness of task @p to run on @cpu taking into account the
|
|
|
|
* CPU original capacity and the runtime/deadline ratio of the task.
|
|
|
|
*
|
|
|
|
* The function will return true if the CPU original capacity of the
|
|
|
|
* @cpu scaled by SCHED_CAPACITY_SCALE >= runtime/deadline ratio of the
|
|
|
|
* task and false otherwise.
|
|
|
|
*/
|
|
|
|
static inline bool dl_task_fits_capacity(struct task_struct *p, int cpu)
|
|
|
|
{
|
|
|
|
unsigned long cap = arch_scale_cpu_capacity(cpu);
|
|
|
|
|
|
|
|
return cap_scale(p->dl.dl_deadline, cap) >= p->dl.dl_runtime;
|
|
|
|
}
|
|
|
|
|
2017-02-01 20:10:18 +08:00
|
|
|
extern void init_dl_bw(struct dl_bw *dl_b);
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
extern int sched_dl_global_validate(void);
|
2017-06-22 02:22:01 +08:00
|
|
|
extern void sched_dl_do_global(void);
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
extern int sched_dl_overflow(struct task_struct *p, int policy, const struct sched_attr *attr);
|
2017-06-22 02:22:01 +08:00
|
|
|
extern void __setparam_dl(struct task_struct *p, const struct sched_attr *attr);
|
|
|
|
extern void __getparam_dl(struct task_struct *p, struct sched_attr *attr);
|
|
|
|
extern bool __checkparam_dl(const struct sched_attr *attr);
|
|
|
|
extern bool dl_param_changed(struct task_struct *p, const struct sched_attr *attr);
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
extern int dl_cpuset_cpumask_can_shrink(const struct cpumask *cur, const struct cpumask *trial);
|
2022-03-03 02:34:30 +08:00
|
|
|
extern int dl_cpu_busy(int cpu, struct task_struct *p);
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_CGROUP_SCHED
|
|
|
|
|
|
|
|
struct cfs_rq;
|
|
|
|
struct rt_rq;
|
|
|
|
|
2012-08-07 11:00:13 +08:00
|
|
|
extern struct list_head task_groups;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
struct cfs_bandwidth {
|
|
|
|
#ifdef CONFIG_CFS_BANDWIDTH
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
raw_spinlock_t lock;
|
|
|
|
ktime_t period;
|
|
|
|
u64 quota;
|
|
|
|
u64 runtime;
|
sched/fair: Introduce the burstable CFS controller
The CFS bandwidth controller limits CPU requests of a task group to
quota during each period. However, parallel workloads might be bursty
so that they get throttled even when their average utilization is under
quota. And they are latency sensitive at the same time so that
throttling them is undesired.
We borrow time now against our future underrun, at the cost of increased
interference against the other system users. All nicely bounded.
Traditional (UP-EDF) bandwidth control is something like:
(U = \Sum u_i) <= 1
This guaranteeds both that every deadline is met and that the system is
stable. After all, if U were > 1, then for every second of walltime,
we'd have to run more than a second of program time, and obviously miss
our deadline, but the next deadline will be further out still, there is
never time to catch up, unbounded fail.
This work observes that a workload doesn't always executes the full
quota; this enables one to describe u_i as a statistical distribution.
For example, have u_i = {x,e}_i, where x is the p(95) and x+e p(100)
(the traditional WCET). This effectively allows u to be smaller,
increasing the efficiency (we can pack more tasks in the system), but at
the cost of missing deadlines when all the odds line up. However, it
does maintain stability, since every overrun must be paired with an
underrun as long as our x is above the average.
That is, suppose we have 2 tasks, both specify a p(95) value, then we
have a p(95)*p(95) = 90.25% chance both tasks are within their quota and
everything is good. At the same time we have a p(5)p(5) = 0.25% chance
both tasks will exceed their quota at the same time (guaranteed deadline
fail). Somewhere in between there's a threshold where one exceeds and
the other doesn't underrun enough to compensate; this depends on the
specific CDFs.
At the same time, we can say that the worst case deadline miss, will be
\Sum e_i; that is, there is a bounded tardiness (under the assumption
that x+e is indeed WCET).
The benefit of burst is seen when testing with schbench. Default value of
kernel.sched_cfs_bandwidth_slice_us(5ms) and CONFIG_HZ(1000) is used.
mkdir /sys/fs/cgroup/cpu/test
echo $$ > /sys/fs/cgroup/cpu/test/cgroup.procs
echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_quota_us
echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_burst_us
./schbench -m 1 -t 3 -r 20 -c 80000 -R 10
The average CPU usage is at 80%. I run this for 10 times, and got long tail
latency for 6 times and got throttled for 8 times.
Tail latencies are shown below, and it wasn't the worst case.
Latency percentiles (usec)
50.0000th: 19872
75.0000th: 21344
90.0000th: 22176
95.0000th: 22496
*99.0000th: 22752
99.5000th: 22752
99.9000th: 22752
min=0, max=22727
rps: 9.90 p95 (usec) 22496 p99 (usec) 22752 p95/cputime 28.12% p99/cputime 28.44%
The interferenece when using burst is valued by the possibilities for
missing the deadline and the average WCET. Test results showed that when
there many cgroups or CPU is under utilized, the interference is
limited. More details are shown in:
https://lore.kernel.org/lkml/5371BD36-55AE-4F71-B9D7-B86DC32E3D2B@linux.alibaba.com/
Co-developed-by: Shanpei Chen <shanpeic@linux.alibaba.com>
Signed-off-by: Shanpei Chen <shanpeic@linux.alibaba.com>
Co-developed-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210621092800.23714-2-changhuaixin@linux.alibaba.com
2021-06-21 17:27:58 +08:00
|
|
|
u64 burst;
|
2021-08-30 11:22:14 +08:00
|
|
|
u64 runtime_snap;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
s64 hierarchical_quota;
|
|
|
|
|
2019-06-07 01:21:01 +08:00
|
|
|
u8 idle;
|
|
|
|
u8 period_active;
|
|
|
|
u8 slack_started;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct hrtimer period_timer;
|
|
|
|
struct hrtimer slack_timer;
|
|
|
|
struct list_head throttled_cfs_rq;
|
|
|
|
|
|
|
|
/* Statistics: */
|
|
|
|
int nr_periods;
|
|
|
|
int nr_throttled;
|
2021-08-30 11:22:14 +08:00
|
|
|
int nr_burst;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 throttled_time;
|
2021-08-30 11:22:14 +08:00
|
|
|
u64 burst_time;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
/* Task group related information */
|
2011-10-25 16:00:11 +08:00
|
|
|
struct task_group {
|
|
|
|
struct cgroup_subsys_state css;
|
|
|
|
|
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
/* schedulable entities of this group on each CPU */
|
|
|
|
struct sched_entity **se;
|
|
|
|
/* runqueue "owned" by this group on each CPU */
|
|
|
|
struct cfs_rq **cfs_rq;
|
|
|
|
unsigned long shares;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2021-07-30 10:00:18 +08:00
|
|
|
/* A positive value indicates that this is a SCHED_IDLE group. */
|
|
|
|
int idle;
|
|
|
|
|
2013-06-20 10:18:46 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2015-12-03 02:41:49 +08:00
|
|
|
/*
|
|
|
|
* load_avg can be heavily contended at clock tick time, so put
|
|
|
|
* it in its own cacheline separated from the fields above which
|
|
|
|
* will also be accessed at each tick.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
atomic_long_t load_avg ____cacheline_aligned;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
2013-06-20 10:18:46 +08:00
|
|
|
#endif
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_RT_GROUP_SCHED
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct sched_rt_entity **rt_se;
|
|
|
|
struct rt_rq **rt_rq;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct rt_bandwidth rt_bandwidth;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct rcu_head rcu;
|
|
|
|
struct list_head list;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct task_group *parent;
|
|
|
|
struct list_head siblings;
|
|
|
|
struct list_head children;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SCHED_AUTOGROUP
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct autogroup *autogroup;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct cfs_bandwidth cfs_bandwidth;
|
sched/uclamp: Extend CPU's cgroup controller
The cgroup CPU bandwidth controller allows to assign a specified
(maximum) bandwidth to the tasks of a group. However this bandwidth is
defined and enforced only on a temporal base, without considering the
actual frequency a CPU is running on. Thus, the amount of computation
completed by a task within an allocated bandwidth can be very different
depending on the actual frequency the CPU is running that task.
The amount of computation can be affected also by the specific CPU a
task is running on, especially when running on asymmetric capacity
systems like Arm's big.LITTLE.
With the availability of schedutil, the scheduler is now able
to drive frequency selections based on actual task utilization.
Moreover, the utilization clamping support provides a mechanism to
bias the frequency selection operated by schedutil depending on
constraints assigned to the tasks currently RUNNABLE on a CPU.
Giving the mechanisms described above, it is now possible to extend the
cpu controller to specify the minimum (or maximum) utilization which
should be considered for tasks RUNNABLE on a cpu.
This makes it possible to better defined the actual computational
power assigned to task groups, thus improving the cgroup CPU bandwidth
controller which is currently based just on time constraints.
Extend the CPU controller with a couple of new attributes uclamp.{min,max}
which allow to enforce utilization boosting and capping for all the
tasks in a group.
Specifically:
- uclamp.min: defines the minimum utilization which should be considered
i.e. the RUNNABLE tasks of this group will run at least at a
minimum frequency which corresponds to the uclamp.min
utilization
- uclamp.max: defines the maximum utilization which should be considered
i.e. the RUNNABLE tasks of this group will run up to a
maximum frequency which corresponds to the uclamp.max
utilization
These attributes:
a) are available only for non-root nodes, both on default and legacy
hierarchies, while system wide clamps are defined by a generic
interface which does not depends on cgroups. This system wide
interface enforces constraints on tasks in the root node.
b) enforce effective constraints at each level of the hierarchy which
are a restriction of the group requests considering its parent's
effective constraints. Root group effective constraints are defined
by the system wide interface.
This mechanism allows each (non-root) level of the hierarchy to:
- request whatever clamp values it would like to get
- effectively get only up to the maximum amount allowed by its parent
c) have higher priority than task-specific clamps, defined via
sched_setattr(), thus allowing to control and restrict task requests.
Add two new attributes to the cpu controller to collect "requested"
clamp values. Allow that at each non-root level of the hierarchy.
Keep it simple by not caring now about "effective" values computation
and propagation along the hierarchy.
Update sysctl_sched_uclamp_handler() to use the newly introduced
uclamp_mutex so that we serialize system default updates with cgroup
relate updates.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-22 21:28:06 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_UCLAMP_TASK_GROUP
|
|
|
|
/* The two decimal precision [%] value requested from user-space */
|
|
|
|
unsigned int uclamp_pct[UCLAMP_CNT];
|
|
|
|
/* Clamp values requested for a task group */
|
|
|
|
struct uclamp_se uclamp_req[UCLAMP_CNT];
|
2019-08-22 21:28:07 +08:00
|
|
|
/* Effective clamp values used for a task group */
|
|
|
|
struct uclamp_se uclamp[UCLAMP_CNT];
|
sched/uclamp: Extend CPU's cgroup controller
The cgroup CPU bandwidth controller allows to assign a specified
(maximum) bandwidth to the tasks of a group. However this bandwidth is
defined and enforced only on a temporal base, without considering the
actual frequency a CPU is running on. Thus, the amount of computation
completed by a task within an allocated bandwidth can be very different
depending on the actual frequency the CPU is running that task.
The amount of computation can be affected also by the specific CPU a
task is running on, especially when running on asymmetric capacity
systems like Arm's big.LITTLE.
With the availability of schedutil, the scheduler is now able
to drive frequency selections based on actual task utilization.
Moreover, the utilization clamping support provides a mechanism to
bias the frequency selection operated by schedutil depending on
constraints assigned to the tasks currently RUNNABLE on a CPU.
Giving the mechanisms described above, it is now possible to extend the
cpu controller to specify the minimum (or maximum) utilization which
should be considered for tasks RUNNABLE on a cpu.
This makes it possible to better defined the actual computational
power assigned to task groups, thus improving the cgroup CPU bandwidth
controller which is currently based just on time constraints.
Extend the CPU controller with a couple of new attributes uclamp.{min,max}
which allow to enforce utilization boosting and capping for all the
tasks in a group.
Specifically:
- uclamp.min: defines the minimum utilization which should be considered
i.e. the RUNNABLE tasks of this group will run at least at a
minimum frequency which corresponds to the uclamp.min
utilization
- uclamp.max: defines the maximum utilization which should be considered
i.e. the RUNNABLE tasks of this group will run up to a
maximum frequency which corresponds to the uclamp.max
utilization
These attributes:
a) are available only for non-root nodes, both on default and legacy
hierarchies, while system wide clamps are defined by a generic
interface which does not depends on cgroups. This system wide
interface enforces constraints on tasks in the root node.
b) enforce effective constraints at each level of the hierarchy which
are a restriction of the group requests considering its parent's
effective constraints. Root group effective constraints are defined
by the system wide interface.
This mechanism allows each (non-root) level of the hierarchy to:
- request whatever clamp values it would like to get
- effectively get only up to the maximum amount allowed by its parent
c) have higher priority than task-specific clamps, defined via
sched_setattr(), thus allowing to control and restrict task requests.
Add two new attributes to the cpu controller to collect "requested"
clamp values. Allow that at each non-root level of the hierarchy.
Keep it simple by not caring now about "effective" values computation
and propagation along the hierarchy.
Update sysctl_sched_uclamp_handler() to use the newly introduced
uclamp_mutex so that we serialize system default updates with cgroup
relate updates.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190822132811.31294-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-22 21:28:06 +08:00
|
|
|
#endif
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
|
|
|
#define ROOT_TASK_GROUP_LOAD NICE_0_LOAD
|
|
|
|
|
|
|
|
/*
|
|
|
|
* A weight of 0 or 1 can cause arithmetics problems.
|
|
|
|
* A weight of a cfs_rq is the sum of weights of which entities
|
|
|
|
* are queued on this cfs_rq, so a weight of a entity should not be
|
|
|
|
* too large, so as the shares value of a task group.
|
|
|
|
* (The default weight is 1024 - so there's no practical
|
|
|
|
* limitation from this.)
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
#define MIN_SHARES (1UL << 1)
|
|
|
|
#define MAX_SHARES (1UL << 18)
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
typedef int (*tg_visitor)(struct task_group *, void *);
|
|
|
|
|
|
|
|
extern int walk_tg_tree_from(struct task_group *from,
|
|
|
|
tg_visitor down, tg_visitor up, void *data);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Iterate the full tree, calling @down when first entering a node and @up when
|
|
|
|
* leaving it for the final time.
|
|
|
|
*
|
|
|
|
* Caller must hold rcu_lock or sufficient equivalent.
|
|
|
|
*/
|
|
|
|
static inline int walk_tg_tree(tg_visitor down, tg_visitor up, void *data)
|
|
|
|
{
|
|
|
|
return walk_tg_tree_from(&root_task_group, down, up, data);
|
|
|
|
}
|
|
|
|
|
|
|
|
extern int tg_nop(struct task_group *tg, void *data);
|
|
|
|
|
|
|
|
extern void free_fair_sched_group(struct task_group *tg);
|
|
|
|
extern int alloc_fair_sched_group(struct task_group *tg, struct task_group *parent);
|
2016-06-22 20:58:02 +08:00
|
|
|
extern void online_fair_sched_group(struct task_group *tg);
|
2016-01-22 05:24:16 +08:00
|
|
|
extern void unregister_fair_sched_group(struct task_group *tg);
|
2011-10-25 16:00:11 +08:00
|
|
|
extern void init_tg_cfs_entry(struct task_group *tg, struct cfs_rq *cfs_rq,
|
|
|
|
struct sched_entity *se, int cpu,
|
|
|
|
struct sched_entity *parent);
|
|
|
|
extern void init_cfs_bandwidth(struct cfs_bandwidth *cfs_b);
|
|
|
|
|
|
|
|
extern void __refill_cfs_bandwidth_runtime(struct cfs_bandwidth *cfs_b);
|
sched: Cleanup bandwidth timers
Roman reported a 3 cpu lockup scenario involving __start_cfs_bandwidth().
The more I look at that code the more I'm convinced its crack, that
entire __start_cfs_bandwidth() thing is brain melting, we don't need to
cancel a timer before starting it, *hrtimer_start*() will happily remove
the timer for you if its still enqueued.
Removing that, removes a big part of the problem, no more ugly cancel
loop to get stuck in.
So now, if I understand things right, the entire reason you have this
cfs_b->lock guarded ->timer_active nonsense is to make sure we don't
accidentally lose the timer.
It appears to me that it should be possible to guarantee that same by
unconditionally (re)starting the timer when !queued. Because regardless
what hrtimer::function will return, if we beat it to (re)enqueue the
timer, it doesn't matter.
Now, because hrtimers don't come with any serialization guarantees we
must ensure both handler and (re)start loop serialize their access to
the hrtimer to avoid both trying to forward the timer at the same
time.
Update the rt bandwidth timer to match.
This effectively reverts: 09dc4ab03936 ("sched/fair: Fix
tg_set_cfs_bandwidth() deadlock on rq->lock").
Reported-by: Roman Gushchin <klamm@yandex-team.ru>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20150415095011.804589208@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-15 17:41:57 +08:00
|
|
|
extern void start_cfs_bandwidth(struct cfs_bandwidth *cfs_b);
|
2011-10-25 16:00:11 +08:00
|
|
|
extern void unthrottle_cfs_rq(struct cfs_rq *cfs_rq);
|
|
|
|
|
sched/fair: Prevent dead task groups from regaining cfs_rq's
Kevin is reporting crashes which point to a use-after-free of a cfs_rq
in update_blocked_averages(). Initial debugging revealed that we've
live cfs_rq's (on_list=1) in an about to be kfree()'d task group in
free_fair_sched_group(). However, it was unclear how that can happen.
His kernel config happened to lead to a layout of struct sched_entity
that put the 'my_q' member directly into the middle of the object
which makes it incidentally overlap with SLUB's freelist pointer.
That, in combination with SLAB_FREELIST_HARDENED's freelist pointer
mangling, leads to a reliable access violation in form of a #GP which
made the UAF fail fast.
Michal seems to have run into the same issue[1]. He already correctly
diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert
cfs_rq's to list on unthrottle") is causing the preconditions for the
UAF to happen by re-adding cfs_rq's also to task groups that have no
more running tasks, i.e. also to dead ones. His analysis, however,
misses the real root cause and it cannot be seen from the crash
backtrace only, as the real offender is tg_unthrottle_up() getting
called via sched_cfs_period_timer() via the timer interrupt at an
inconvenient time.
When unregister_fair_sched_group() unlinks all cfs_rq's from the dying
task group, it doesn't protect itself from getting interrupted. If the
timer interrupt triggers while we iterate over all CPUs or after
unregister_fair_sched_group() has finished but prior to unlinking the
task group, sched_cfs_period_timer() will execute and walk the list of
task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the
dying task group. These will later -- in free_fair_sched_group() -- be
kfree()'ed while still being linked, leading to the fireworks Kevin
and Michal are seeing.
To fix this race, ensure the dying task group gets unlinked first.
However, simply switching the order of unregistering and unlinking the
task group isn't sufficient, as concurrent RCU walkers might still see
it, as can be seen below:
CPU1: CPU2:
: timer IRQ:
: do_sched_cfs_period_timer():
: :
: distribute_cfs_runtime():
: rcu_read_lock();
: :
: unthrottle_cfs_rq():
sched_offline_group(): :
: walk_tg_tree_from(…,tg_unthrottle_up,…):
list_del_rcu(&tg->list); :
(1) : list_for_each_entry_rcu(child, &parent->children, siblings)
: :
(2) list_del_rcu(&tg->siblings); :
: tg_unthrottle_up():
unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)];
: :
list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); :
: :
: if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running)
(3) : list_add_leaf_cfs_rq(cfs_rq);
: :
: :
: :
: :
: :
(4) : rcu_read_unlock();
CPU 2 walks the task group list in parallel to sched_offline_group(),
specifically, it'll read the soon to be unlinked task group entry at
(1). Unlinking it on CPU 1 at (2) therefore won't prevent CPU 2 from
still passing it on to tg_unthrottle_up(). CPU 1 now tries to unlink
all cfs_rq's via list_del_leaf_cfs_rq() in
unregister_fair_sched_group(). Meanwhile CPU 2 will re-add some of
these at (3), which is the cause of the UAF later on.
To prevent this additional race from happening, we need to wait until
walk_tg_tree_from() has finished traversing the task groups, i.e.
after the RCU read critical section ends in (4). Afterwards we're safe
to call unregister_fair_sched_group(), as each new walk won't see the
dying task group any more.
On top of that, we need to wait yet another RCU grace period after
unregister_fair_sched_group() to ensure print_cfs_stats(), which might
run concurrently, always sees valid objects, i.e. not already free'd
ones.
This patch survives Michal's reproducer[2] for 8h+ now, which used to
trigger within minutes before.
[1] https://lore.kernel.org/lkml/20211011172236.11223-1-mkoutny@suse.com/
[2] https://lore.kernel.org/lkml/20211102160228.GA57072@blackbody.suse.cz/
Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
[peterz: shuffle code around a bit]
Reported-by: Kevin Tanguy <kevin.tanguy@corp.ovh.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2021-11-04 03:06:13 +08:00
|
|
|
extern void unregister_rt_sched_group(struct task_group *tg);
|
2011-10-25 16:00:11 +08:00
|
|
|
extern void free_rt_sched_group(struct task_group *tg);
|
|
|
|
extern int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent);
|
|
|
|
extern void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq,
|
|
|
|
struct sched_rt_entity *rt_se, int cpu,
|
|
|
|
struct sched_rt_entity *parent);
|
2017-06-22 02:22:02 +08:00
|
|
|
extern int sched_group_set_rt_runtime(struct task_group *tg, long rt_runtime_us);
|
|
|
|
extern int sched_group_set_rt_period(struct task_group *tg, u64 rt_period_us);
|
|
|
|
extern long sched_group_rt_runtime(struct task_group *tg);
|
|
|
|
extern long sched_group_rt_period(struct task_group *tg);
|
|
|
|
extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk);
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2013-03-05 16:07:33 +08:00
|
|
|
extern struct task_group *sched_create_group(struct task_group *parent);
|
|
|
|
extern void sched_online_group(struct task_group *tg,
|
|
|
|
struct task_group *parent);
|
|
|
|
extern void sched_destroy_group(struct task_group *tg);
|
sched/fair: Prevent dead task groups from regaining cfs_rq's
Kevin is reporting crashes which point to a use-after-free of a cfs_rq
in update_blocked_averages(). Initial debugging revealed that we've
live cfs_rq's (on_list=1) in an about to be kfree()'d task group in
free_fair_sched_group(). However, it was unclear how that can happen.
His kernel config happened to lead to a layout of struct sched_entity
that put the 'my_q' member directly into the middle of the object
which makes it incidentally overlap with SLUB's freelist pointer.
That, in combination with SLAB_FREELIST_HARDENED's freelist pointer
mangling, leads to a reliable access violation in form of a #GP which
made the UAF fail fast.
Michal seems to have run into the same issue[1]. He already correctly
diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert
cfs_rq's to list on unthrottle") is causing the preconditions for the
UAF to happen by re-adding cfs_rq's also to task groups that have no
more running tasks, i.e. also to dead ones. His analysis, however,
misses the real root cause and it cannot be seen from the crash
backtrace only, as the real offender is tg_unthrottle_up() getting
called via sched_cfs_period_timer() via the timer interrupt at an
inconvenient time.
When unregister_fair_sched_group() unlinks all cfs_rq's from the dying
task group, it doesn't protect itself from getting interrupted. If the
timer interrupt triggers while we iterate over all CPUs or after
unregister_fair_sched_group() has finished but prior to unlinking the
task group, sched_cfs_period_timer() will execute and walk the list of
task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the
dying task group. These will later -- in free_fair_sched_group() -- be
kfree()'ed while still being linked, leading to the fireworks Kevin
and Michal are seeing.
To fix this race, ensure the dying task group gets unlinked first.
However, simply switching the order of unregistering and unlinking the
task group isn't sufficient, as concurrent RCU walkers might still see
it, as can be seen below:
CPU1: CPU2:
: timer IRQ:
: do_sched_cfs_period_timer():
: :
: distribute_cfs_runtime():
: rcu_read_lock();
: :
: unthrottle_cfs_rq():
sched_offline_group(): :
: walk_tg_tree_from(…,tg_unthrottle_up,…):
list_del_rcu(&tg->list); :
(1) : list_for_each_entry_rcu(child, &parent->children, siblings)
: :
(2) list_del_rcu(&tg->siblings); :
: tg_unthrottle_up():
unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)];
: :
list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); :
: :
: if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running)
(3) : list_add_leaf_cfs_rq(cfs_rq);
: :
: :
: :
: :
: :
(4) : rcu_read_unlock();
CPU 2 walks the task group list in parallel to sched_offline_group(),
specifically, it'll read the soon to be unlinked task group entry at
(1). Unlinking it on CPU 1 at (2) therefore won't prevent CPU 2 from
still passing it on to tg_unthrottle_up(). CPU 1 now tries to unlink
all cfs_rq's via list_del_leaf_cfs_rq() in
unregister_fair_sched_group(). Meanwhile CPU 2 will re-add some of
these at (3), which is the cause of the UAF later on.
To prevent this additional race from happening, we need to wait until
walk_tg_tree_from() has finished traversing the task groups, i.e.
after the RCU read critical section ends in (4). Afterwards we're safe
to call unregister_fair_sched_group(), as each new walk won't see the
dying task group any more.
On top of that, we need to wait yet another RCU grace period after
unregister_fair_sched_group() to ensure print_cfs_stats(), which might
run concurrently, always sees valid objects, i.e. not already free'd
ones.
This patch survives Michal's reproducer[2] for 8h+ now, which used to
trigger within minutes before.
[1] https://lore.kernel.org/lkml/20211011172236.11223-1-mkoutny@suse.com/
[2] https://lore.kernel.org/lkml/20211102160228.GA57072@blackbody.suse.cz/
Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
[peterz: shuffle code around a bit]
Reported-by: Kevin Tanguy <kevin.tanguy@corp.ovh.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2021-11-04 03:06:13 +08:00
|
|
|
extern void sched_release_group(struct task_group *tg);
|
2013-03-05 16:07:33 +08:00
|
|
|
|
|
|
|
extern void sched_move_task(struct task_struct *tsk);
|
|
|
|
|
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
|
|
|
extern int sched_group_set_shares(struct task_group *tg, unsigned long shares);
|
2015-10-24 00:16:19 +08:00
|
|
|
|
2021-07-30 10:00:18 +08:00
|
|
|
extern int sched_group_set_idle(struct task_group *tg, long idle);
|
|
|
|
|
2015-10-24 00:16:19 +08:00
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
extern void set_task_rq_fair(struct sched_entity *se,
|
|
|
|
struct cfs_rq *prev, struct cfs_rq *next);
|
|
|
|
#else /* !CONFIG_SMP */
|
|
|
|
static inline void set_task_rq_fair(struct sched_entity *se,
|
|
|
|
struct cfs_rq *prev, struct cfs_rq *next) { }
|
|
|
|
#endif /* CONFIG_SMP */
|
|
|
|
#endif /* CONFIG_FAIR_GROUP_SCHED */
|
2013-03-05 16:07:33 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#else /* CONFIG_CGROUP_SCHED */
|
|
|
|
|
|
|
|
struct cfs_bandwidth { };
|
|
|
|
|
|
|
|
#endif /* CONFIG_CGROUP_SCHED */
|
|
|
|
|
|
|
|
/* CFS-related fields in a runqueue */
|
|
|
|
struct cfs_rq {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct load_weight load;
|
|
|
|
unsigned int nr_running;
|
2019-06-26 13:06:29 +08:00
|
|
|
unsigned int h_nr_running; /* SCHED_{NORMAL,BATCH,IDLE} */
|
2021-08-20 09:04:01 +08:00
|
|
|
unsigned int idle_nr_running; /* SCHED_IDLE */
|
2019-06-26 13:06:29 +08:00
|
|
|
unsigned int idle_h_nr_running; /* SCHED_IDLE */
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 exec_clock;
|
|
|
|
u64 min_vruntime;
|
sched/fair: Snapshot the min_vruntime of CPUs on force idle
During force-idle, we end up doing cross-cpu comparison of vruntimes
during pick_next_task. If we simply compare (vruntime-min_vruntime)
across CPUs, and if the CPUs only have 1 task each, we will always
end up comparing 0 with 0 and pick just one of the tasks all the time.
This starves the task that was not picked. To fix this, take a snapshot
of the min_vruntime when entering force idle and use it for comparison.
This min_vruntime snapshot will only be used for cross-CPU vruntime
comparison, and nothing else.
A note about the min_vruntime snapshot and force idling:
During selection:
When we're not fi, we need to update snapshot.
when we're fi and we were not fi, we must update snapshot.
When we're fi and we were already fi, we must not update snapshot.
Which gives:
fib fi update
0 0 1
0 1 1
1 0 1
1 1 0
Where:
fi: force-idled now
fib: force-idled before
So the min_vruntime snapshot needs to be updated when: !(fib && fi).
Also, the cfs_prio_less() function needs to be aware of whether the
core is in force idle or not, since it will be use this information to
know whether to advance a cfs_rq's min_vruntime_fi in the hierarchy.
So pass this information along via pick_task() -> prio_less().
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.738542617@infradead.org
2020-11-18 07:19:39 +08:00
|
|
|
#ifdef CONFIG_SCHED_CORE
|
|
|
|
unsigned int forceidle_seq;
|
|
|
|
u64 min_vruntime_fi;
|
|
|
|
#endif
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifndef CONFIG_64BIT
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 min_vruntime_copy;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct rb_root_cached tasks_timeline;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* 'curr' points to currently running entity on this cfs_rq.
|
|
|
|
* It is set to NULL otherwise (i.e when none are currently running).
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct sched_entity *curr;
|
|
|
|
struct sched_entity *next;
|
|
|
|
struct sched_entity *last;
|
|
|
|
struct sched_entity *skip;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int nr_spread_over;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
2012-10-04 19:18:30 +08:00
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
/*
|
sched/fair: Rewrite runnable load and utilization average tracking
The idea of runnable load average (let runnable time contribute to weight)
was proposed by Paul Turner and Ben Segall, and it is still followed by
this rewrite. This rewrite aims to solve the following issues:
1. cfs_rq's load average (namely runnable_load_avg and blocked_load_avg) is
updated at the granularity of an entity at a time, which results in the
cfs_rq's load average is stale or partially updated: at any time, only
one entity is up to date, all other entities are effectively lagging
behind. This is undesirable.
To illustrate, if we have n runnable entities in the cfs_rq, as time
elapses, they certainly become outdated:
t0: cfs_rq { e1_old, e2_old, ..., en_old }
and when we update:
t1: update e1, then we have cfs_rq { e1_new, e2_old, ..., en_old }
t2: update e2, then we have cfs_rq { e1_old, e2_new, ..., en_old }
...
We solve this by combining all runnable entities' load averages together
in cfs_rq's avg, and update the cfs_rq's avg as a whole. This is based
on the fact that if we regard the update as a function, then:
w * update(e) = update(w * e) and
update(e1) + update(e2) = update(e1 + e2), then
w1 * update(e1) + w2 * update(e2) = update(w1 * e1 + w2 * e2)
therefore, by this rewrite, we have an entirely updated cfs_rq at the
time we update it:
t1: update cfs_rq { e1_new, e2_new, ..., en_new }
t2: update cfs_rq { e1_new, e2_new, ..., en_new }
...
2. cfs_rq's load average is different between top rq->cfs_rq and other
task_group's per CPU cfs_rqs in whether or not blocked_load_average
contributes to the load.
The basic idea behind runnable load average (the same for utilization)
is that the blocked state is taken into account as opposed to only
accounting for the currently runnable state. Therefore, the average
should include both the runnable/running and blocked load averages.
This rewrite does that.
In addition, we also combine runnable/running and blocked averages
of all entities into the cfs_rq's average, and update it together at
once. This is based on the fact that:
update(runnable) + update(blocked) = update(runnable + blocked)
This significantly reduces the code as we don't need to separately
maintain/update runnable/running load and blocked load.
3. How task_group entities' share is calculated is complex and imprecise.
We reduce the complexity in this rewrite to allow a very simple rule:
the task_group's load_avg is aggregated from its per CPU cfs_rqs's
load_avgs. Then group entity's weight is simply proportional to its
own cfs_rq's load_avg / task_group's load_avg. To illustrate,
if a task_group has { cfs_rq1, cfs_rq2, ..., cfs_rqn }, then,
task_group_avg = cfs_rq1_avg + cfs_rq2_avg + ... + cfs_rqn_avg, then
cfs_rqx's entity's share = cfs_rqx_avg / task_group_avg * task_group's share
To sum up, this rewrite in principle is equivalent to the current one, but
fixes the issues described above. Turns out, it significantly reduces the
code complexity and hence increases clarity and efficiency. In addition,
the new averages are more smooth/continuous (no spurious spikes and valleys)
and updated more consistently and quickly to reflect the load dynamics.
As a result, we have less load tracking overhead, better performance,
and especially better power efficiency due to more balanced load.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan@linux.intel.com
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: fengguang.wu@intel.com
Cc: len.brown@intel.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: rafael.j.wysocki@intel.com
Cc: umgwanakikbuti@gmail.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1436918682-4971-3-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 08:04:37 +08:00
|
|
|
* CFS load tracking
|
2012-10-04 19:18:30 +08:00
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct sched_avg avg;
|
2017-05-08 22:51:41 +08:00
|
|
|
#ifndef CONFIG_64BIT
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 load_last_update_time_copy;
|
sched/fair: Rewrite runnable load and utilization average tracking
The idea of runnable load average (let runnable time contribute to weight)
was proposed by Paul Turner and Ben Segall, and it is still followed by
this rewrite. This rewrite aims to solve the following issues:
1. cfs_rq's load average (namely runnable_load_avg and blocked_load_avg) is
updated at the granularity of an entity at a time, which results in the
cfs_rq's load average is stale or partially updated: at any time, only
one entity is up to date, all other entities are effectively lagging
behind. This is undesirable.
To illustrate, if we have n runnable entities in the cfs_rq, as time
elapses, they certainly become outdated:
t0: cfs_rq { e1_old, e2_old, ..., en_old }
and when we update:
t1: update e1, then we have cfs_rq { e1_new, e2_old, ..., en_old }
t2: update e2, then we have cfs_rq { e1_old, e2_new, ..., en_old }
...
We solve this by combining all runnable entities' load averages together
in cfs_rq's avg, and update the cfs_rq's avg as a whole. This is based
on the fact that if we regard the update as a function, then:
w * update(e) = update(w * e) and
update(e1) + update(e2) = update(e1 + e2), then
w1 * update(e1) + w2 * update(e2) = update(w1 * e1 + w2 * e2)
therefore, by this rewrite, we have an entirely updated cfs_rq at the
time we update it:
t1: update cfs_rq { e1_new, e2_new, ..., en_new }
t2: update cfs_rq { e1_new, e2_new, ..., en_new }
...
2. cfs_rq's load average is different between top rq->cfs_rq and other
task_group's per CPU cfs_rqs in whether or not blocked_load_average
contributes to the load.
The basic idea behind runnable load average (the same for utilization)
is that the blocked state is taken into account as opposed to only
accounting for the currently runnable state. Therefore, the average
should include both the runnable/running and blocked load averages.
This rewrite does that.
In addition, we also combine runnable/running and blocked averages
of all entities into the cfs_rq's average, and update it together at
once. This is based on the fact that:
update(runnable) + update(blocked) = update(runnable + blocked)
This significantly reduces the code as we don't need to separately
maintain/update runnable/running load and blocked load.
3. How task_group entities' share is calculated is complex and imprecise.
We reduce the complexity in this rewrite to allow a very simple rule:
the task_group's load_avg is aggregated from its per CPU cfs_rqs's
load_avgs. Then group entity's weight is simply proportional to its
own cfs_rq's load_avg / task_group's load_avg. To illustrate,
if a task_group has { cfs_rq1, cfs_rq2, ..., cfs_rqn }, then,
task_group_avg = cfs_rq1_avg + cfs_rq2_avg + ... + cfs_rqn_avg, then
cfs_rqx's entity's share = cfs_rqx_avg / task_group_avg * task_group's share
To sum up, this rewrite in principle is equivalent to the current one, but
fixes the issues described above. Turns out, it significantly reduces the
code complexity and hence increases clarity and efficiency. In addition,
the new averages are more smooth/continuous (no spurious spikes and valleys)
and updated more consistently and quickly to reflect the load dynamics.
As a result, we have less load tracking overhead, better performance,
and especially better power efficiency due to more balanced load.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan@linux.intel.com
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: fengguang.wu@intel.com
Cc: len.brown@intel.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: rafael.j.wysocki@intel.com
Cc: umgwanakikbuti@gmail.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1436918682-4971-3-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 08:04:37 +08:00
|
|
|
#endif
|
2017-05-08 22:51:41 +08:00
|
|
|
struct {
|
|
|
|
raw_spinlock_t lock ____cacheline_aligned;
|
|
|
|
int nr;
|
|
|
|
unsigned long load_avg;
|
|
|
|
unsigned long util_avg;
|
2020-02-24 17:52:18 +08:00
|
|
|
unsigned long runnable_avg;
|
2017-05-08 22:51:41 +08:00
|
|
|
} removed;
|
2012-10-04 19:18:31 +08:00
|
|
|
|
sched/fair: Rewrite runnable load and utilization average tracking
The idea of runnable load average (let runnable time contribute to weight)
was proposed by Paul Turner and Ben Segall, and it is still followed by
this rewrite. This rewrite aims to solve the following issues:
1. cfs_rq's load average (namely runnable_load_avg and blocked_load_avg) is
updated at the granularity of an entity at a time, which results in the
cfs_rq's load average is stale or partially updated: at any time, only
one entity is up to date, all other entities are effectively lagging
behind. This is undesirable.
To illustrate, if we have n runnable entities in the cfs_rq, as time
elapses, they certainly become outdated:
t0: cfs_rq { e1_old, e2_old, ..., en_old }
and when we update:
t1: update e1, then we have cfs_rq { e1_new, e2_old, ..., en_old }
t2: update e2, then we have cfs_rq { e1_old, e2_new, ..., en_old }
...
We solve this by combining all runnable entities' load averages together
in cfs_rq's avg, and update the cfs_rq's avg as a whole. This is based
on the fact that if we regard the update as a function, then:
w * update(e) = update(w * e) and
update(e1) + update(e2) = update(e1 + e2), then
w1 * update(e1) + w2 * update(e2) = update(w1 * e1 + w2 * e2)
therefore, by this rewrite, we have an entirely updated cfs_rq at the
time we update it:
t1: update cfs_rq { e1_new, e2_new, ..., en_new }
t2: update cfs_rq { e1_new, e2_new, ..., en_new }
...
2. cfs_rq's load average is different between top rq->cfs_rq and other
task_group's per CPU cfs_rqs in whether or not blocked_load_average
contributes to the load.
The basic idea behind runnable load average (the same for utilization)
is that the blocked state is taken into account as opposed to only
accounting for the currently runnable state. Therefore, the average
should include both the runnable/running and blocked load averages.
This rewrite does that.
In addition, we also combine runnable/running and blocked averages
of all entities into the cfs_rq's average, and update it together at
once. This is based on the fact that:
update(runnable) + update(blocked) = update(runnable + blocked)
This significantly reduces the code as we don't need to separately
maintain/update runnable/running load and blocked load.
3. How task_group entities' share is calculated is complex and imprecise.
We reduce the complexity in this rewrite to allow a very simple rule:
the task_group's load_avg is aggregated from its per CPU cfs_rqs's
load_avgs. Then group entity's weight is simply proportional to its
own cfs_rq's load_avg / task_group's load_avg. To illustrate,
if a task_group has { cfs_rq1, cfs_rq2, ..., cfs_rqn }, then,
task_group_avg = cfs_rq1_avg + cfs_rq2_avg + ... + cfs_rqn_avg, then
cfs_rqx's entity's share = cfs_rqx_avg / task_group_avg * task_group's share
To sum up, this rewrite in principle is equivalent to the current one, but
fixes the issues described above. Turns out, it significantly reduces the
code complexity and hence increases clarity and efficiency. In addition,
the new averages are more smooth/continuous (no spurious spikes and valleys)
and updated more consistently and quickly to reflect the load dynamics.
As a result, we have less load tracking overhead, better performance,
and especially better power efficiency due to more balanced load.
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arjan@linux.intel.com
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: fengguang.wu@intel.com
Cc: len.brown@intel.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: rafael.j.wysocki@intel.com
Cc: umgwanakikbuti@gmail.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1436918682-4971-3-git-send-email-yuyang.du@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 08:04:37 +08:00
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned long tg_load_avg_contrib;
|
|
|
|
long propagate;
|
|
|
|
long prop_runnable_sum;
|
2017-05-08 23:30:46 +08:00
|
|
|
|
2012-10-04 19:18:31 +08:00
|
|
|
/*
|
|
|
|
* h_load = weight * f(tg)
|
|
|
|
*
|
|
|
|
* Where f(tg) is the recursive weight fraction assigned to
|
|
|
|
* this group.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned long h_load;
|
|
|
|
u64 last_h_load_update;
|
|
|
|
struct sched_entity *h_load_next;
|
sched: Move h_load calculation to task_h_load()
The bad thing about update_h_load(), which computes hierarchical load
factor for task groups, is that it is called for each task group in the
system before every load balancer run, and since rebalance can be
triggered very often, this function can eat really a lot of cpu time if
there are many cpu cgroups in the system.
Although the situation was improved significantly by commit a35b646
('sched, cgroup: Reduce rq->lock hold times for large cgroup
hierarchies'), the problem still can arise under some kinds of loads,
e.g. when cpus are switching from idle to busy and back very frequently.
For instance, when I start 1000 of processes that wake up every
millisecond on my 8 cpus host, 'top' and 'perf top' show:
Cpu(s): 17.8%us, 24.3%sy, 0.0%ni, 57.9%id, 0.0%wa, 0.0%hi, 0.0%si
Events: 243K cycles
7.57% [kernel] [k] __schedule
7.08% [kernel] [k] timerqueue_add
6.13% libc-2.12.so [.] usleep
Then if I create 10000 *idle* cpu cgroups (no processes in them), cpu
usage increases significantly although the 'wakers' are still executing
in the root cpu cgroup:
Cpu(s): 19.1%us, 48.7%sy, 0.0%ni, 31.6%id, 0.0%wa, 0.0%hi, 0.7%si
Events: 230K cycles
24.56% [kernel] [k] tg_load_down
5.76% [kernel] [k] __schedule
This happens because this particular kind of load triggers 'new idle'
rebalance very frequently, which requires calling update_h_load(),
which, in turn, calls tg_load_down() for every *idle* cpu cgroup even
though it is absolutely useless, because idle cpu cgroups have no tasks
to pull.
This patch tries to improve the situation by making h_load calculation
proceed only when h_load is really necessary. To achieve this, it
substitutes update_h_load() with update_cfs_rq_h_load(), which computes
h_load only for a given cfs_rq and all its ascendants, and makes the
load balancer call this function whenever it considers if a task should
be pulled, i.e. it moves h_load calculations directly to task_h_load().
For h_load of the same cfs_rq not to be updated multiple times (in case
several tasks in the same cgroup are considered during the same balance
run), the patch keeps the time of the last h_load update for each cfs_rq
and breaks calculation when it finds h_load to be uptodate.
The benefit of it is that h_load is computed only for those cfs_rq's,
which really need it, in particular all idle task groups are skipped.
Although this, in fact, moves h_load calculation under rq lock, it
should not affect latency much, because the amount of work done under rq
lock while trying to pull tasks is limited by sched_nr_migrate.
After the patch applied with the setup described above (1000 wakers in
the root cgroup and 10000 idle cgroups), I get:
Cpu(s): 16.9%us, 24.8%sy, 0.0%ni, 58.4%id, 0.0%wa, 0.0%hi, 0.0%si
Events: 242K cycles
7.57% [kernel] [k] __schedule
6.70% [kernel] [k] timerqueue_add
5.93% libc-2.12.so [.] usleep
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1373896159-1278-1-git-send-email-vdavydov@parallels.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-15 21:49:19 +08:00
|
|
|
#endif /* CONFIG_FAIR_GROUP_SCHED */
|
2012-10-04 19:18:31 +08:00
|
|
|
#endif /* CONFIG_SMP */
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct rq *rq; /* CPU runqueue to which this cfs_rq is attached */
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* leaf cfs_rqs are those that hold tasks (lowest schedulable entity in
|
|
|
|
* a hierarchy). Non-leaf lrqs hold other higher schedulable entities
|
|
|
|
* (like users, containers etc.)
|
|
|
|
*
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* leaf_cfs_rq_list ties together list of leaf cfs_rq's in a CPU.
|
|
|
|
* This list is used during load balance.
|
2011-10-25 16:00:11 +08:00
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int on_list;
|
|
|
|
struct list_head leaf_cfs_rq_list;
|
|
|
|
struct task_group *tg; /* group that "owns" this runqueue */
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2021-07-30 10:00:18 +08:00
|
|
|
/* Locally cached copy of our task_group's idle value */
|
|
|
|
int idle;
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_CFS_BANDWIDTH
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int runtime_enabled;
|
|
|
|
s64 runtime_remaining;
|
|
|
|
|
|
|
|
u64 throttled_clock;
|
2022-04-08 19:53:08 +08:00
|
|
|
u64 throttled_clock_pelt;
|
|
|
|
u64 throttled_clock_pelt_time;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int throttled;
|
|
|
|
int throttle_count;
|
|
|
|
struct list_head throttled_list;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif /* CONFIG_CFS_BANDWIDTH */
|
|
|
|
#endif /* CONFIG_FAIR_GROUP_SCHED */
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline int rt_bandwidth_enabled(void)
|
|
|
|
{
|
|
|
|
return sysctl_sched_rt_runtime >= 0;
|
|
|
|
}
|
|
|
|
|
sched/rt: Use IPI to trigger RT task push migration instead of pulling
When debugging the latencies on a 40 core box, where we hit 300 to
500 microsecond latencies, I found there was a huge contention on the
runqueue locks.
Investigating it further, running ftrace, I found that it was due to
the pulling of RT tasks.
The test that was run was the following:
cyclictest --numa -p95 -m -d0 -i100
This created a thread on each CPU, that would set its wakeup in iterations
of 100 microseconds. The -d0 means that all the threads had the same
interval (100us). Each thread sleeps for 100us and wakes up and measures
its latencies.
cyclictest is maintained at:
git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git
What happened was another RT task would be scheduled on one of the CPUs
that was running our test, when the other CPU tests went to sleep and
scheduled idle. This caused the "pull" operation to execute on all
these CPUs. Each one of these saw the RT task that was overloaded on
the CPU of the test that was still running, and each one tried
to grab that task in a thundering herd way.
To grab the task, each thread would do a double rq lock grab, grabbing
its own lock as well as the rq of the overloaded CPU. As the sched
domains on this box was rather flat for its size, I saw up to 12 CPUs
block on this lock at once. This caused a ripple affect with the
rq locks especially since the taking was done via a double rq lock, which
means that several of the CPUs had their own rq locks held while trying
to take this rq lock. As these locks were blocked, any wakeups or load
balanceing on these CPUs would also block on these locks, and the wait
time escalated.
I've tried various methods to lessen the load, but things like an
atomic counter to only let one CPU grab the task wont work, because
the task may have a limited affinity, and we may pick the wrong
CPU to take that lock and do the pull, to only find out that the
CPU we picked isn't in the task's affinity.
Instead of doing the PULL, I now have the CPUs that want the pull to
send over an IPI to the overloaded CPU, and let that CPU pick what
CPU to push the task to. No more need to grab the rq lock, and the
push/pull algorithm still works fine.
With this patch, the latency dropped to just 150us over a 20 hour run.
Without the patch, the huge latencies would trigger in seconds.
I've created a new sched feature called RT_PUSH_IPI, which is enabled
by default.
When RT_PUSH_IPI is not enabled, the old method of grabbing the rq locks
and having the pulling CPU do the work is implemented. When RT_PUSH_IPI
is enabled, the IPI is sent to the overloaded CPU to do a push.
To enabled or disable this at run time:
# mount -t debugfs nodev /sys/kernel/debug
# echo RT_PUSH_IPI > /sys/kernel/debug/sched_features
or
# echo NO_RT_PUSH_IPI > /sys/kernel/debug/sched_features
Update: This original patch would send an IPI to all CPUs in the RT overload
list. But that could theoretically cause the reverse issue. That is, there
could be lots of overloaded RT queues and one CPU lowers its priority. It would
then send an IPI to all the overloaded RT queues and they could then all try
to grab the rq lock of the CPU lowering its priority, and then we have the
same problem.
The latest design sends out only one IPI to the first overloaded CPU. It tries to
push any tasks that it can, and then looks for the next overloaded CPU that can
push to the source CPU. The IPIs stop when all overloaded CPUs that have pushable
tasks that have priorities greater than the source CPU are covered. In case the
source CPU lowers its priority again, a flag is set to tell the IPI traversal to
restart with the first RT overloaded CPU after the source CPU.
Parts-suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joern Engel <joern@purestorage.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150318144946.2f3cc982@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-19 02:49:46 +08:00
|
|
|
/* RT IPI pull logic requires IRQ_WORK */
|
sched/rt: Simplify the IPI based RT balancing logic
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e0c ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-07 02:05:04 +08:00
|
|
|
#if defined(CONFIG_IRQ_WORK) && defined(CONFIG_SMP)
|
sched/rt: Use IPI to trigger RT task push migration instead of pulling
When debugging the latencies on a 40 core box, where we hit 300 to
500 microsecond latencies, I found there was a huge contention on the
runqueue locks.
Investigating it further, running ftrace, I found that it was due to
the pulling of RT tasks.
The test that was run was the following:
cyclictest --numa -p95 -m -d0 -i100
This created a thread on each CPU, that would set its wakeup in iterations
of 100 microseconds. The -d0 means that all the threads had the same
interval (100us). Each thread sleeps for 100us and wakes up and measures
its latencies.
cyclictest is maintained at:
git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git
What happened was another RT task would be scheduled on one of the CPUs
that was running our test, when the other CPU tests went to sleep and
scheduled idle. This caused the "pull" operation to execute on all
these CPUs. Each one of these saw the RT task that was overloaded on
the CPU of the test that was still running, and each one tried
to grab that task in a thundering herd way.
To grab the task, each thread would do a double rq lock grab, grabbing
its own lock as well as the rq of the overloaded CPU. As the sched
domains on this box was rather flat for its size, I saw up to 12 CPUs
block on this lock at once. This caused a ripple affect with the
rq locks especially since the taking was done via a double rq lock, which
means that several of the CPUs had their own rq locks held while trying
to take this rq lock. As these locks were blocked, any wakeups or load
balanceing on these CPUs would also block on these locks, and the wait
time escalated.
I've tried various methods to lessen the load, but things like an
atomic counter to only let one CPU grab the task wont work, because
the task may have a limited affinity, and we may pick the wrong
CPU to take that lock and do the pull, to only find out that the
CPU we picked isn't in the task's affinity.
Instead of doing the PULL, I now have the CPUs that want the pull to
send over an IPI to the overloaded CPU, and let that CPU pick what
CPU to push the task to. No more need to grab the rq lock, and the
push/pull algorithm still works fine.
With this patch, the latency dropped to just 150us over a 20 hour run.
Without the patch, the huge latencies would trigger in seconds.
I've created a new sched feature called RT_PUSH_IPI, which is enabled
by default.
When RT_PUSH_IPI is not enabled, the old method of grabbing the rq locks
and having the pulling CPU do the work is implemented. When RT_PUSH_IPI
is enabled, the IPI is sent to the overloaded CPU to do a push.
To enabled or disable this at run time:
# mount -t debugfs nodev /sys/kernel/debug
# echo RT_PUSH_IPI > /sys/kernel/debug/sched_features
or
# echo NO_RT_PUSH_IPI > /sys/kernel/debug/sched_features
Update: This original patch would send an IPI to all CPUs in the RT overload
list. But that could theoretically cause the reverse issue. That is, there
could be lots of overloaded RT queues and one CPU lowers its priority. It would
then send an IPI to all the overloaded RT queues and they could then all try
to grab the rq lock of the CPU lowering its priority, and then we have the
same problem.
The latest design sends out only one IPI to the first overloaded CPU. It tries to
push any tasks that it can, and then looks for the next overloaded CPU that can
push to the source CPU. The IPIs stop when all overloaded CPUs that have pushable
tasks that have priorities greater than the source CPU are covered. In case the
source CPU lowers its priority again, a flag is set to tell the IPI traversal to
restart with the first RT overloaded CPU after the source CPU.
Parts-suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joern Engel <joern@purestorage.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150318144946.2f3cc982@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-19 02:49:46 +08:00
|
|
|
# define HAVE_RT_PUSH_IPI
|
|
|
|
#endif
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
/* Real-Time classes' related field in a runqueue: */
|
|
|
|
struct rt_rq {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct rt_prio_array active;
|
|
|
|
unsigned int rt_nr_running;
|
|
|
|
unsigned int rr_nr_running;
|
2011-10-25 16:00:11 +08:00
|
|
|
#if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
|
|
|
|
struct {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int curr; /* highest queued rt task prio */
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_SMP
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int next; /* next highest */
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
} highest_prio;
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_SMP
|
2021-04-23 04:02:28 +08:00
|
|
|
unsigned int rt_nr_migratory;
|
|
|
|
unsigned int rt_nr_total;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int overloaded;
|
|
|
|
struct plist_head pushable_tasks;
|
2018-06-28 23:45:05 +08:00
|
|
|
|
sched/rt: Use IPI to trigger RT task push migration instead of pulling
When debugging the latencies on a 40 core box, where we hit 300 to
500 microsecond latencies, I found there was a huge contention on the
runqueue locks.
Investigating it further, running ftrace, I found that it was due to
the pulling of RT tasks.
The test that was run was the following:
cyclictest --numa -p95 -m -d0 -i100
This created a thread on each CPU, that would set its wakeup in iterations
of 100 microseconds. The -d0 means that all the threads had the same
interval (100us). Each thread sleeps for 100us and wakes up and measures
its latencies.
cyclictest is maintained at:
git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git
What happened was another RT task would be scheduled on one of the CPUs
that was running our test, when the other CPU tests went to sleep and
scheduled idle. This caused the "pull" operation to execute on all
these CPUs. Each one of these saw the RT task that was overloaded on
the CPU of the test that was still running, and each one tried
to grab that task in a thundering herd way.
To grab the task, each thread would do a double rq lock grab, grabbing
its own lock as well as the rq of the overloaded CPU. As the sched
domains on this box was rather flat for its size, I saw up to 12 CPUs
block on this lock at once. This caused a ripple affect with the
rq locks especially since the taking was done via a double rq lock, which
means that several of the CPUs had their own rq locks held while trying
to take this rq lock. As these locks were blocked, any wakeups or load
balanceing on these CPUs would also block on these locks, and the wait
time escalated.
I've tried various methods to lessen the load, but things like an
atomic counter to only let one CPU grab the task wont work, because
the task may have a limited affinity, and we may pick the wrong
CPU to take that lock and do the pull, to only find out that the
CPU we picked isn't in the task's affinity.
Instead of doing the PULL, I now have the CPUs that want the pull to
send over an IPI to the overloaded CPU, and let that CPU pick what
CPU to push the task to. No more need to grab the rq lock, and the
push/pull algorithm still works fine.
With this patch, the latency dropped to just 150us over a 20 hour run.
Without the patch, the huge latencies would trigger in seconds.
I've created a new sched feature called RT_PUSH_IPI, which is enabled
by default.
When RT_PUSH_IPI is not enabled, the old method of grabbing the rq locks
and having the pulling CPU do the work is implemented. When RT_PUSH_IPI
is enabled, the IPI is sent to the overloaded CPU to do a push.
To enabled or disable this at run time:
# mount -t debugfs nodev /sys/kernel/debug
# echo RT_PUSH_IPI > /sys/kernel/debug/sched_features
or
# echo NO_RT_PUSH_IPI > /sys/kernel/debug/sched_features
Update: This original patch would send an IPI to all CPUs in the RT overload
list. But that could theoretically cause the reverse issue. That is, there
could be lots of overloaded RT queues and one CPU lowers its priority. It would
then send an IPI to all the overloaded RT queues and they could then all try
to grab the rq lock of the CPU lowering its priority, and then we have the
same problem.
The latest design sends out only one IPI to the first overloaded CPU. It tries to
push any tasks that it can, and then looks for the next overloaded CPU that can
push to the source CPU. The IPIs stop when all overloaded CPUs that have pushable
tasks that have priorities greater than the source CPU are covered. In case the
source CPU lowers its priority again, a flag is set to tell the IPI traversal to
restart with the first RT overloaded CPU after the source CPU.
Parts-suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joern Engel <joern@purestorage.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150318144946.2f3cc982@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-19 02:49:46 +08:00
|
|
|
#endif /* CONFIG_SMP */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int rt_queued;
|
2014-03-15 06:15:00 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int rt_throttled;
|
|
|
|
u64 rt_time;
|
|
|
|
u64 rt_runtime;
|
2011-10-25 16:00:11 +08:00
|
|
|
/* Nests inside the rq lock: */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
raw_spinlock_t rt_runtime_lock;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_RT_GROUP_SCHED
|
2021-04-23 04:02:28 +08:00
|
|
|
unsigned int rt_nr_boosted;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct rq *rq;
|
|
|
|
struct task_group *tg;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
2018-06-26 21:53:22 +08:00
|
|
|
static inline bool rt_rq_is_runnable(struct rt_rq *rt_rq)
|
|
|
|
{
|
|
|
|
return rt_rq->rt_queued && rt_rq->rt_nr_running;
|
|
|
|
}
|
|
|
|
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
/* Deadline class' related fields in a runqueue */
|
|
|
|
struct dl_rq {
|
|
|
|
/* runqueue is an rbtree, ordered by deadline */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct rb_root_cached root;
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
|
2021-04-23 04:02:28 +08:00
|
|
|
unsigned int dl_nr_running;
|
sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.
Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.
The very same approach used in sched_rt is utilised:
- -deadline tasks are kept into CPU-specific runqueues,
- -deadline tasks are migrated among runqueues to achieve the
following:
* on an M-CPU system the M earliest deadline ready tasks
are always running;
* affinity/cpusets settings of all the -deadline tasks is
always respected.
Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.
To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.
In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:38 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
/*
|
|
|
|
* Deadline values of the currently executing and the
|
|
|
|
* earliest ready task on this rq. Caching these facilitates
|
2018-12-03 17:05:56 +08:00
|
|
|
* the decision whether or not a ready but not running task
|
sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.
Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.
The very same approach used in sched_rt is utilised:
- -deadline tasks are kept into CPU-specific runqueues,
- -deadline tasks are migrated among runqueues to achieve the
following:
* on an M-CPU system the M earliest deadline ready tasks
are always running;
* affinity/cpusets settings of all the -deadline tasks is
always respected.
Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.
To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.
In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:38 +08:00
|
|
|
* should migrate somewhere else.
|
|
|
|
*/
|
|
|
|
struct {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 curr;
|
|
|
|
u64 next;
|
sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.
Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.
The very same approach used in sched_rt is utilised:
- -deadline tasks are kept into CPU-specific runqueues,
- -deadline tasks are migrated among runqueues to achieve the
following:
* on an M-CPU system the M earliest deadline ready tasks
are always running;
* affinity/cpusets settings of all the -deadline tasks is
always respected.
Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.
To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.
In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:38 +08:00
|
|
|
} earliest_dl;
|
|
|
|
|
2021-04-23 04:02:28 +08:00
|
|
|
unsigned int dl_nr_migratory;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int overloaded;
|
sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.
Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.
The very same approach used in sched_rt is utilised:
- -deadline tasks are kept into CPU-specific runqueues,
- -deadline tasks are migrated among runqueues to achieve the
following:
* on an M-CPU system the M earliest deadline ready tasks
are always running;
* affinity/cpusets settings of all the -deadline tasks is
always respected.
Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.
To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.
In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:38 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Tasks on this rq that can be pushed away. They are kept in
|
|
|
|
* an rb-tree, ordered by tasks' deadlines, with caching
|
|
|
|
* of the leftmost (earliest deadline) element.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct rb_root_cached pushable_dl_tasks_root;
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
#else
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct dl_bw dl_bw;
|
sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.
Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.
The very same approach used in sched_rt is utilised:
- -deadline tasks are kept into CPU-specific runqueues,
- -deadline tasks are migrated among runqueues to achieve the
following:
* on an M-CPU system the M earliest deadline ready tasks
are always running;
* affinity/cpusets settings of all the -deadline tasks is
always respected.
Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.
To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.
In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:38 +08:00
|
|
|
#endif
|
2017-05-19 04:13:28 +08:00
|
|
|
/*
|
|
|
|
* "Active utilization" for this runqueue: increased when a
|
|
|
|
* task wakes up (becomes TASK_RUNNING) and decreased when a
|
|
|
|
* task blocks
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 running_bw;
|
2017-05-19 04:13:32 +08:00
|
|
|
|
2017-05-19 04:13:34 +08:00
|
|
|
/*
|
|
|
|
* Utilization of the tasks "assigned" to this runqueue (including
|
|
|
|
* the tasks that are in runqueue and the tasks that executed on this
|
|
|
|
* CPU and blocked). Increased when a task moves to this runqueue, and
|
|
|
|
* decreased when the task moves away (migrates, changes scheduling
|
|
|
|
* policy, or terminates).
|
|
|
|
* This is needed to compute the "inactive utilization" for the
|
|
|
|
* runqueue (inactive utilization = this_bw - running_bw).
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 this_bw;
|
|
|
|
u64 extra_bw;
|
2017-05-19 04:13:34 +08:00
|
|
|
|
2017-05-19 04:13:32 +08:00
|
|
|
/*
|
|
|
|
* Inverse of the fraction of CPU utilization that can be reclaimed
|
|
|
|
* by the GRUB algorithm.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 bw_ratio;
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
};
|
|
|
|
|
2018-06-28 23:45:04 +08:00
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
|
|
|
/* An entity is a task if it doesn't "own" a runqueue */
|
|
|
|
#define entity_is_task(se) (!se->my_q)
|
2020-02-24 17:52:17 +08:00
|
|
|
|
2020-02-24 17:52:18 +08:00
|
|
|
static inline void se_update_runnable(struct sched_entity *se)
|
|
|
|
{
|
|
|
|
if (!entity_is_task(se))
|
|
|
|
se->runnable_weight = se->my_q->h_nr_running;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline long se_runnable(struct sched_entity *se)
|
|
|
|
{
|
|
|
|
if (entity_is_task(se))
|
|
|
|
return !!se->on_rq;
|
|
|
|
else
|
|
|
|
return se->runnable_weight;
|
|
|
|
}
|
|
|
|
|
2018-06-28 23:45:04 +08:00
|
|
|
#else
|
|
|
|
#define entity_is_task(se) 1
|
2020-02-24 17:52:17 +08:00
|
|
|
|
2020-02-24 17:52:18 +08:00
|
|
|
static inline void se_update_runnable(struct sched_entity *se) {}
|
|
|
|
|
|
|
|
static inline long se_runnable(struct sched_entity *se)
|
|
|
|
{
|
|
|
|
return !!se->on_rq;
|
|
|
|
}
|
2018-06-28 23:45:04 +08:00
|
|
|
#endif
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2018-06-28 23:45:04 +08:00
|
|
|
/*
|
|
|
|
* XXX we want to get rid of these helpers and use the full load resolution.
|
|
|
|
*/
|
|
|
|
static inline long se_weight(struct sched_entity *se)
|
|
|
|
{
|
|
|
|
return scale_load_down(se->load.weight);
|
|
|
|
}
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2016-11-23 04:23:53 +08:00
|
|
|
static inline bool sched_asym_prefer(int a, int b)
|
|
|
|
{
|
|
|
|
return arch_asym_cpu_priority(a) > arch_asym_cpu_priority(b);
|
|
|
|
}
|
|
|
|
|
2018-12-03 17:56:18 +08:00
|
|
|
struct perf_domain {
|
|
|
|
struct em_perf_domain *em_pd;
|
|
|
|
struct perf_domain *next;
|
|
|
|
struct rcu_head rcu;
|
|
|
|
};
|
|
|
|
|
2018-12-03 17:56:24 +08:00
|
|
|
/* Scheduling group status flags */
|
|
|
|
#define SG_OVERLOAD 0x1 /* More than one runnable task on a CPU. */
|
sched/fair: Add over-utilization/tipping point indicator
Energy-aware scheduling is only meant to be active while the system is
_not_ over-utilized. That is, there are spare cycles available to shift
tasks around based on their actual utilization to get a more
energy-efficient task distribution without depriving any tasks. When
above the tipping point task placement is done the traditional way based
on load_avg, spreading the tasks across as many cpus as possible based
on priority scaled load to preserve smp_nice. Below the tipping point we
want to use util_avg instead. We need to define a criteria for when we
make the switch.
The util_avg for each cpu converges towards 100% regardless of how many
additional tasks we may put on it. If we define over-utilized as:
sum_{cpus}(rq.cfs.avg.util_avg) + margin > sum_{cpus}(rq.capacity)
some individual cpus may be over-utilized running multiple tasks even
when the above condition is false. That should be okay as long as we try
to spread the tasks out to avoid per-cpu over-utilization as much as
possible and if all tasks have the _same_ priority. If the latter isn't
true, we have to consider priority to preserve smp_nice.
For example, we could have n_cpus nice=-10 util_avg=55% tasks and
n_cpus/2 nice=0 util_avg=60% tasks. Balancing based on util_avg we are
likely to end up with nice=-10 tasks sharing cpus and nice=0 tasks
getting their own as we 1.5*n_cpus tasks in total and 55%+55% is less
over-utilized than 55%+60% for those cpus that have to be shared. The
system utilization is only 85% of the system capacity, but we are
breaking smp_nice.
To be sure not to break smp_nice, we have defined over-utilization
conservatively as when any cpu in the system is fully utilized at its
highest frequency instead:
cpu_rq(any).cfs.avg.util_avg + margin > cpu_rq(any).capacity
IOW, as soon as one cpu is (nearly) 100% utilized, we switch to load_avg
to factor in priority to preserve smp_nice.
With this definition, we can skip periodic load-balance as no cpu has an
always-running task when the system is not over-utilized. All tasks will
be periodic and we can balance them at wake-up. This conservative
condition does however mean that some scenarios that could benefit from
energy-aware decisions even if one cpu is fully utilized would not get
those benefits.
For systems where some cpus might have reduced capacity on some cpus
(RT-pressure and/or big.LITTLE), we want periodic load-balance checks as
soon a just a single cpu is fully utilized as it might one of those with
reduced capacity and in that case we want to migrate it.
[ peterz: Added a comment explaining why new tasks are not accounted during
overutilization detection. ]
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: rjw@rjwysocki.net
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-13-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03 17:56:25 +08:00
|
|
|
#define SG_OVERUTILIZED 0x2 /* One or more CPUs are over-utilized. */
|
2018-12-03 17:56:24 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
/*
|
|
|
|
* We add the notion of a root-domain which will be used to define per-domain
|
|
|
|
* variables. Each exclusive cpuset essentially defines an island domain by
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* fully partitioning the member CPUs from any other cpuset. Whenever a new
|
2011-10-25 16:00:11 +08:00
|
|
|
* exclusive cpuset is created, we also create and attach a new root-domain
|
|
|
|
* object.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
struct root_domain {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
atomic_t refcount;
|
|
|
|
atomic_t rto_count;
|
|
|
|
struct rcu_head rcu;
|
|
|
|
cpumask_var_t span;
|
|
|
|
cpumask_var_t online;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched/fair: Set rq->rd->overload when misfit
Idle balance is a great opportunity to pull a misfit task. However,
there are scenarios where misfit tasks are present but idle balance is
prevented by the overload flag.
A good example of this is a workload of n identical tasks. Let's suppose
we have a 2+2 Arm big.LITTLE system. We then spawn 4 fairly
CPU-intensive tasks - for the sake of simplicity let's say they are just
CPU hogs, even when running on big CPUs.
They are identical tasks, so on an SMP system they should all end at
(roughly) the same time. However, in our case the LITTLE CPUs are less
performing than the big CPUs, so tasks running on the LITTLEs will have
a longer completion time.
This means that the big CPUs will complete their work earlier, at which
point they should pull the tasks from the LITTLEs. What we want to
happen is summarized as follows:
a,b,c,d are our CPU-hogging tasks _ signifies idling
LITTLE_0 | a a a a _ _
LITTLE_1 | b b b b _ _
---------|-------------
big_0 | c c c c a a
big_1 | d d d d b b
^
^
Tasks end on the big CPUs, idle balance happens
and the misfit tasks are pulled straight away
This however won't happen, because currently the overload flag is only
set when there is any CPU that has more than one runnable task - which
may very well not be the case here if our CPU-hogging workload is all
there is to run.
As such, this commit sets the overload flag in update_sg_lb_stats when
a group is flagged as having a misfit task.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: gaku.inami.xh@renesas.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1530699470-29808-10-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-04 18:17:47 +08:00
|
|
|
/*
|
|
|
|
* Indicate pullable load on at least one CPU, e.g:
|
|
|
|
* - More than one runnable task
|
|
|
|
* - Running task is misfit
|
|
|
|
*/
|
2018-07-04 18:17:45 +08:00
|
|
|
int overload;
|
2014-06-24 03:16:49 +08:00
|
|
|
|
sched/fair: Add over-utilization/tipping point indicator
Energy-aware scheduling is only meant to be active while the system is
_not_ over-utilized. That is, there are spare cycles available to shift
tasks around based on their actual utilization to get a more
energy-efficient task distribution without depriving any tasks. When
above the tipping point task placement is done the traditional way based
on load_avg, spreading the tasks across as many cpus as possible based
on priority scaled load to preserve smp_nice. Below the tipping point we
want to use util_avg instead. We need to define a criteria for when we
make the switch.
The util_avg for each cpu converges towards 100% regardless of how many
additional tasks we may put on it. If we define over-utilized as:
sum_{cpus}(rq.cfs.avg.util_avg) + margin > sum_{cpus}(rq.capacity)
some individual cpus may be over-utilized running multiple tasks even
when the above condition is false. That should be okay as long as we try
to spread the tasks out to avoid per-cpu over-utilization as much as
possible and if all tasks have the _same_ priority. If the latter isn't
true, we have to consider priority to preserve smp_nice.
For example, we could have n_cpus nice=-10 util_avg=55% tasks and
n_cpus/2 nice=0 util_avg=60% tasks. Balancing based on util_avg we are
likely to end up with nice=-10 tasks sharing cpus and nice=0 tasks
getting their own as we 1.5*n_cpus tasks in total and 55%+55% is less
over-utilized than 55%+60% for those cpus that have to be shared. The
system utilization is only 85% of the system capacity, but we are
breaking smp_nice.
To be sure not to break smp_nice, we have defined over-utilization
conservatively as when any cpu in the system is fully utilized at its
highest frequency instead:
cpu_rq(any).cfs.avg.util_avg + margin > cpu_rq(any).capacity
IOW, as soon as one cpu is (nearly) 100% utilized, we switch to load_avg
to factor in priority to preserve smp_nice.
With this definition, we can skip periodic load-balance as no cpu has an
always-running task when the system is not over-utilized. All tasks will
be periodic and we can balance them at wake-up. This conservative
condition does however mean that some scenarios that could benefit from
energy-aware decisions even if one cpu is fully utilized would not get
those benefits.
For systems where some cpus might have reduced capacity on some cpus
(RT-pressure and/or big.LITTLE), we want periodic load-balance checks as
soon a just a single cpu is fully utilized as it might one of those with
reduced capacity and in that case we want to migrate it.
[ peterz: Added a comment explaining why new tasks are not accounted during
overutilization detection. ]
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: rjw@rjwysocki.net
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-13-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03 17:56:25 +08:00
|
|
|
/* Indicate one or more cpus over-utilized (tipping point) */
|
|
|
|
int overutilized;
|
|
|
|
|
sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.
Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.
The very same approach used in sched_rt is utilised:
- -deadline tasks are kept into CPU-specific runqueues,
- -deadline tasks are migrated among runqueues to achieve the
following:
* on an M-CPU system the M earliest deadline ready tasks
are always running;
* affinity/cpusets settings of all the -deadline tasks is
always respected.
Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.
To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.
In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:38 +08:00
|
|
|
/*
|
|
|
|
* The bit corresponding to a CPU gets set here if such CPU has more
|
|
|
|
* than one runnable -deadline task (as it is below for RT tasks).
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
cpumask_var_t dlo_mask;
|
|
|
|
atomic_t dlo_count;
|
|
|
|
struct dl_bw dl_bw;
|
|
|
|
struct cpudl cpudl;
|
sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.
Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.
The very same approach used in sched_rt is utilised:
- -deadline tasks are kept into CPU-specific runqueues,
- -deadline tasks are migrated among runqueues to achieve the
following:
* on an M-CPU system the M earliest deadline ready tasks
are always running;
* affinity/cpusets settings of all the -deadline tasks is
always respected.
Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.
To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.
In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:38 +08:00
|
|
|
|
2020-10-08 23:48:46 +08:00
|
|
|
/*
|
|
|
|
* Indicate whether a root_domain's dl_bw has been checked or
|
|
|
|
* updated. It's monotonously increasing value.
|
|
|
|
*
|
|
|
|
* Also, some corner cases, like 'wrap around' is dangerous, but given
|
|
|
|
* that u64 is 'big enough'. So that shouldn't be a concern.
|
|
|
|
*/
|
|
|
|
u64 visit_gen;
|
|
|
|
|
sched/rt: Simplify the IPI based RT balancing logic
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e0c ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-07 02:05:04 +08:00
|
|
|
#ifdef HAVE_RT_PUSH_IPI
|
|
|
|
/*
|
|
|
|
* For IPI pull requests, loop across the rto_mask.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct irq_work rto_push_work;
|
|
|
|
raw_spinlock_t rto_lock;
|
sched/rt: Simplify the IPI based RT balancing logic
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e0c ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-07 02:05:04 +08:00
|
|
|
/* These are only updated and read within rto_lock */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int rto_loop;
|
|
|
|
int rto_cpu;
|
sched/rt: Simplify the IPI based RT balancing logic
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e0c ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-07 02:05:04 +08:00
|
|
|
/* These atomics are updated outside of a lock */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
atomic_t rto_loop_next;
|
|
|
|
atomic_t rto_loop_start;
|
sched/rt: Simplify the IPI based RT balancing logic
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e0c ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-07 02:05:04 +08:00
|
|
|
#endif
|
2011-10-25 16:00:11 +08:00
|
|
|
/*
|
|
|
|
* The "RT overload" flag: it gets set if a CPU has more than
|
|
|
|
* one runnable RT task.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
cpumask_var_t rto_mask;
|
|
|
|
struct cpupri cpupri;
|
2016-08-02 02:53:35 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned long max_cpu_capacity;
|
2018-12-03 17:56:18 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* NULL-terminated list of performance domains intersecting with the
|
|
|
|
* CPUs of the rd. Protected by RCU.
|
|
|
|
*/
|
2019-03-21 08:34:26 +08:00
|
|
|
struct perf_domain __rcu *pd;
|
2011-10-25 16:00:11 +08:00
|
|
|
};
|
|
|
|
|
2017-02-01 20:10:18 +08:00
|
|
|
extern void init_defrootdomain(void);
|
2017-04-25 21:29:40 +08:00
|
|
|
extern int sched_init_domains(const struct cpumask *cpu_map);
|
2017-02-01 20:10:18 +08:00
|
|
|
extern void rq_attach_root(struct rq *rq, struct root_domain *rd);
|
2018-01-24 09:45:38 +08:00
|
|
|
extern void sched_get_rd(struct root_domain *rd);
|
|
|
|
extern void sched_put_rd(struct root_domain *rd);
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched/rt: Simplify the IPI based RT balancing logic
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e0c ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-07 02:05:04 +08:00
|
|
|
#ifdef HAVE_RT_PUSH_IPI
|
|
|
|
extern void rto_push_irq_work_func(struct irq_work *work);
|
|
|
|
#endif
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif /* CONFIG_SMP */
|
|
|
|
|
2019-06-21 16:42:02 +08:00
|
|
|
#ifdef CONFIG_UCLAMP_TASK
|
|
|
|
/*
|
|
|
|
* struct uclamp_bucket - Utilization clamp bucket
|
|
|
|
* @value: utilization clamp value for tasks on this clamp bucket
|
|
|
|
* @tasks: number of RUNNABLE tasks on this clamp bucket
|
|
|
|
*
|
|
|
|
* Keep track of how many tasks are RUNNABLE for a given utilization
|
|
|
|
* clamp value.
|
|
|
|
*/
|
|
|
|
struct uclamp_bucket {
|
|
|
|
unsigned long value : bits_per(SCHED_CAPACITY_SCALE);
|
|
|
|
unsigned long tasks : BITS_PER_LONG - bits_per(SCHED_CAPACITY_SCALE);
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* struct uclamp_rq - rq's utilization clamp
|
|
|
|
* @value: currently active clamp values for a rq
|
|
|
|
* @bucket: utilization clamp buckets affecting a rq
|
|
|
|
*
|
|
|
|
* Keep track of RUNNABLE tasks on a rq to aggregate their clamp values.
|
|
|
|
* A clamp value is affecting a rq when there is at least one task RUNNABLE
|
|
|
|
* (or actually running) with that value.
|
|
|
|
*
|
|
|
|
* There are up to UCLAMP_CNT possible different clamp values, currently there
|
|
|
|
* are only two: minimum utilization and maximum utilization.
|
|
|
|
*
|
|
|
|
* All utilization clamping values are MAX aggregated, since:
|
|
|
|
* - for util_min: we want to run the CPU at least at the max of the minimum
|
|
|
|
* utilization required by its currently RUNNABLE tasks.
|
|
|
|
* - for util_max: we want to allow the CPU to run up to the max of the
|
|
|
|
* maximum utilization allowed by its currently RUNNABLE tasks.
|
|
|
|
*
|
|
|
|
* Since on each system we expect only a limited number of different
|
|
|
|
* utilization clamp values (UCLAMP_BUCKETS), use a simple array to track
|
|
|
|
* the metrics required to compute all the per-rq utilization clamp values.
|
|
|
|
*/
|
|
|
|
struct uclamp_rq {
|
|
|
|
unsigned int value;
|
|
|
|
struct uclamp_bucket bucket[UCLAMP_BUCKETS];
|
|
|
|
};
|
2020-06-30 19:21:23 +08:00
|
|
|
|
|
|
|
DECLARE_STATIC_KEY_FALSE(sched_uclamp_used);
|
2019-06-21 16:42:02 +08:00
|
|
|
#endif /* CONFIG_UCLAMP_TASK */
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
/*
|
|
|
|
* This is the main, per-CPU runqueue data structure.
|
|
|
|
*
|
|
|
|
* Locking rule: those places that want to lock multiple runqueues
|
|
|
|
* (such as the load balancing or the thread migration code), lock
|
|
|
|
* acquire operations must be ordered by ascending &runqueue.
|
|
|
|
*/
|
|
|
|
struct rq {
|
|
|
|
/* runqueue lock: */
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spinlock_t __lock;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* nr_running and cpu_load should be in the same cacheline because
|
|
|
|
* remote CPUs use both these fields when doing load calculation.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int nr_running;
|
2013-10-07 18:29:33 +08:00
|
|
|
#ifdef CONFIG_NUMA_BALANCING
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int nr_numa_running;
|
|
|
|
unsigned int nr_preferred_running;
|
sched/numa: Stop multiple tasks from moving to the CPU at the same time
Task migration under NUMA balancing can happen in parallel. More than
one task might choose to migrate to the same CPU at the same time. This
can result in:
- During task swap, choosing a task that was not part of the evaluation.
- During task swap, task which just got moved into its preferred node,
moving to a completely different node.
- During task swap, task failing to move to the preferred node, will have
to wait an extra interval for the next migrate opportunity.
- During task movement, multiple task movements can cause load imbalance.
This problem is more likely if there are more cores per node or more
nodes in the system.
Use a per run-queue variable to check if NUMA-balance is active on the
run-queue.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 200194 203353 1.57797
1 311331 328205 5.41995
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 197654 214384 8.46429
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 192605 188553 -2.10379
1 213402 196273 -8.02664
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 52227.1 57581.2 10.2516
1 102529 103468 0.915838
There is a regression on power 9 box. If we look at the details,
that box has a sudden jump in cache-misses with this patch.
All other parameters seem to be pointing towards NUMA
consolidation.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,345,784 13,941,377
migrations 1,127,820 1,157,323
faults 374,736 382,175
cache-misses 55,132,054,603 54,993,823,500
sched:sched_move_numa 1,923 2,005
sched:sched_stick_numa 52 14
sched:sched_swap_numa 595 529
migrate:mm_migrate_pages 1,932 1,573
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 60605 67099
numa_hint_faults_local 51804 58456
numa_hit 239945 240416
numa_huge_pte_updates 14 18
numa_interleave 60 65
numa_local 239865 240339
numa_other 80 77
numa_pages_migrated 1931 1574
numa_pte_updates 67823 77182
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,016,467 3,176,453
migrations 37,326 30,238
faults 115,342 87,869
cache-misses 11,692,155,554 12,544,479,391
sched:sched_move_numa 965 23
sched:sched_stick_numa 8 0
sched:sched_swap_numa 35 6
migrate:mm_migrate_pages 1,168 10
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 16286 236
numa_hint_faults_local 11863 201
numa_hit 112482 72293
numa_huge_pte_updates 33 0
numa_interleave 20 26
numa_local 112419 72233
numa_other 63 60
numa_pages_migrated 1144 8
numa_pte_updates 32859 0
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,629,724 8,478,820
migrations 221,052 171,323
faults 308,661 307,499
cache-misses 135,574,913 240,353,599
sched:sched_move_numa 147 214
sched:sched_stick_numa 0 0
sched:sched_swap_numa 2 4
migrate:mm_migrate_pages 64 89
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 11481 5301
numa_hint_faults_local 10968 4745
numa_hit 89773 92943
numa_huge_pte_updates 0 0
numa_interleave 1116 899
numa_local 89220 92345
numa_other 553 598
numa_pages_migrated 62 88
numa_pte_updates 11694 5505
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,272,887 2,066,172
migrations 12,206 11,076
faults 163,704 149,544
cache-misses 4,801,186 10,398,067
sched:sched_move_numa 44 43
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 17 6
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 2261 3552
numa_hint_faults_local 1993 3347
numa_hit 25726 25611
numa_huge_pte_updates 0 0
numa_interleave 239 213
numa_local 25498 25583
numa_other 228 28
numa_pages_migrated 17 6
numa_pte_updates 2266 3535
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 117,980,962 99,358,136
migrations 3,950,220 4,041,607
faults 736,979 749,653
cache-misses 224,976,072,879 225,562,543,251
sched:sched_move_numa 504 771
sched:sched_stick_numa 50 14
sched:sched_swap_numa 239 204
migrate:mm_migrate_pages 1,260 1,180
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 18293 27409
numa_hint_faults_local 11969 20677
numa_hit 240854 239988
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 240851 239983
numa_other 3 5
numa_pages_migrated 1190 1016
numa_pte_updates 18106 27916
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 61,053,158 60,899,307
migrations 551,586 544,668
faults 244,174 270,834
cache-misses 74,326,766,973 74,543,455,635
sched:sched_move_numa 344 735
sched:sched_stick_numa 24 25
sched:sched_swap_numa 140 174
migrate:mm_migrate_pages 568 816
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 6461 11059
numa_hint_faults_local 2283 4733
numa_hit 35661 41384
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 35661 41383
numa_other 0 1
numa_pages_migrated 568 815
numa_pte_updates 6518 11323
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-2-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-22 01:48:56 +08:00
|
|
|
unsigned int numa_migrate_on;
|
2013-10-07 18:29:33 +08:00
|
|
|
#endif
|
2011-08-11 05:21:01 +08:00
|
|
|
#ifdef CONFIG_NO_HZ_COMMON
|
2016-04-19 23:36:51 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2017-12-21 18:20:23 +08:00
|
|
|
unsigned long last_blocked_load_update_tick;
|
2018-02-13 18:31:17 +08:00
|
|
|
unsigned int has_blocked_load;
|
2020-03-27 18:44:56 +08:00
|
|
|
call_single_data_t nohz_csd;
|
2016-04-19 23:36:51 +08:00
|
|
|
#endif /* CONFIG_SMP */
|
2017-12-21 22:06:50 +08:00
|
|
|
unsigned int nohz_tick_stopped;
|
2020-03-27 18:44:56 +08:00
|
|
|
atomic_t nohz_flags;
|
2016-04-19 23:36:51 +08:00
|
|
|
#endif /* CONFIG_NO_HZ_COMMON */
|
2018-02-21 12:17:28 +08:00
|
|
|
|
2020-05-27 00:11:03 +08:00
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
unsigned int ttwu_pending;
|
|
|
|
#endif
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 nr_switches;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2019-06-21 16:42:02 +08:00
|
|
|
#ifdef CONFIG_UCLAMP_TASK
|
|
|
|
/* Utilization clamp values based on CPU's RUNNABLE tasks */
|
|
|
|
struct uclamp_rq uclamp[UCLAMP_CNT] ____cacheline_aligned;
|
2019-06-21 16:42:04 +08:00
|
|
|
unsigned int uclamp_flags;
|
|
|
|
#define UCLAMP_FLAG_IDLE 0x01
|
2019-06-21 16:42:02 +08:00
|
|
|
#endif
|
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct cfs_rq cfs;
|
|
|
|
struct rt_rq rt;
|
|
|
|
struct dl_rq dl;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
/* list of leaf cfs_rq on this CPU: */
|
|
|
|
struct list_head leaf_cfs_rq_list;
|
|
|
|
struct list_head *tmp_alone_branch;
|
2012-08-09 03:46:40 +08:00
|
|
|
#endif /* CONFIG_FAIR_GROUP_SCHED */
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
/*
|
|
|
|
* This is part of a global counter where only the total sum
|
|
|
|
* over all CPUs matters. A task can increase this counter on
|
|
|
|
* one CPU and if it got migrated afterwards it may decrease
|
|
|
|
* it on another CPU. Always updated under the runqueue lock:
|
|
|
|
*/
|
2021-04-23 04:02:28 +08:00
|
|
|
unsigned int nr_uninterruptible;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2020-02-01 20:58:03 +08:00
|
|
|
struct task_struct __rcu *curr;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct task_struct *idle;
|
|
|
|
struct task_struct *stop;
|
|
|
|
unsigned long next_balance;
|
|
|
|
struct mm_struct *prev_mm;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int clock_update_flags;
|
|
|
|
u64 clock;
|
sched/fair: Update scale invariance of PELT
The current implementation of load tracking invariance scales the
contribution with current frequency and uarch performance (only for
utilization) of the CPU. One main result of this formula is that the
figures are capped by current capacity of CPU. Another one is that the
load_avg is not invariant because not scaled with uarch.
The util_avg of a periodic task that runs r time slots every p time slots
varies in the range :
U * (1-y^r)/(1-y^p) * y^i < Utilization < U * (1-y^r)/(1-y^p)
with U is the max util_avg value = SCHED_CAPACITY_SCALE
At a lower capacity, the range becomes:
U * C * (1-y^r')/(1-y^p) * y^i' < Utilization < U * C * (1-y^r')/(1-y^p)
with C reflecting the compute capacity ratio between current capacity and
max capacity.
so C tries to compensate changes in (1-y^r') but it can't be accurate.
Instead of scaling the contribution value of PELT algo, we should scale the
running time. The PELT signal aims to track the amount of computation of
tasks and/or rq so it seems more correct to scale the running time to
reflect the effective amount of computation done since the last update.
In order to be fully invariant, we need to apply the same amount of
running time and idle time whatever the current capacity. Because running
at lower capacity implies that the task will run longer, we have to ensure
that the same amount of idle time will be applied when system becomes idle
and no idle time has been "stolen". But reaching the maximum utilization
value (SCHED_CAPACITY_SCALE) means that the task is seen as an
always-running task whatever the capacity of the CPU (even at max compute
capacity). In this case, we can discard this "stolen" idle times which
becomes meaningless.
In order to achieve this time scaling, a new clock_pelt is created per rq.
The increase of this clock scales with current capacity when something
is running on rq and synchronizes with clock_task when rq is idle. With
this mechanism, we ensure the same running and idle time whatever the
current capacity. This also enables to simplify the pelt algorithm by
removing all references of uarch and frequency and applying the same
contribution to utilization and loads. Furthermore, the scaling is done
only once per update of clock (update_rq_clock_task()) instead of during
each update of sched_entities and cfs/rt/dl_rq of the rq like the current
implementation. This is interesting when cgroup are involved as shown in
the results below:
On a hikey (octo Arm64 platform).
Performance cpufreq governor and only shallowest c-state to remove variance
generated by those power features so we only track the impact of pelt algo.
each test runs 16 times:
./perf bench sched pipe
(higher is better)
kernel tip/sched/core + patch
ops/seconds ops/seconds diff
cgroup
root 59652(+/- 0.18%) 59876(+/- 0.24%) +0.38%
level1 55608(+/- 0.27%) 55923(+/- 0.24%) +0.57%
level2 52115(+/- 0.29%) 52564(+/- 0.22%) +0.86%
hackbench -l 1000
(lower is better)
kernel tip/sched/core + patch
duration(sec) duration(sec) diff
cgroup
root 4.453(+/- 2.37%) 4.383(+/- 2.88%) -1.57%
level1 4.859(+/- 8.50%) 4.830(+/- 7.07%) -0.60%
level2 5.063(+/- 9.83%) 4.928(+/- 9.66%) -2.66%
Then, the responsiveness of PELT is improved when CPU is not running at max
capacity with this new algorithm. I have put below some examples of
duration to reach some typical load values according to the capacity of the
CPU with current implementation and with this patch. These values has been
computed based on the geometric series and the half period value:
Util (%) max capacity half capacity(mainline) half capacity(w/ patch)
972 (95%) 138ms not reachable 276ms
486 (47.5%) 30ms 138ms 60ms
256 (25%) 13ms 32ms 26ms
On my hikey (octo Arm64 platform) with schedutil governor, the time to
reach max OPP when starting from a null utilization, decreases from 223ms
with current scale invariance down to 121ms with the new algorithm.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: patrick.bellasi@arm.com
Cc: pjt@google.com
Cc: pkondeti@codeaurora.org
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Link: https://lkml.kernel.org/r/1548257214-13745-3-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-23 23:26:53 +08:00
|
|
|
/* Ensure that all clocks are in the same cache line */
|
|
|
|
u64 clock_task ____cacheline_aligned;
|
|
|
|
u64 clock_pelt;
|
|
|
|
unsigned long lost_idle_time;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
atomic_t nr_iowait;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2021-04-17 05:29:36 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
u64 last_seen_need_resched_ns;
|
|
|
|
int ticks_without_resched;
|
|
|
|
#endif
|
|
|
|
|
2019-09-20 01:37:02 +08:00
|
|
|
#ifdef CONFIG_MEMBARRIER
|
|
|
|
int membarrier_state;
|
|
|
|
#endif
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2019-03-21 08:34:24 +08:00
|
|
|
struct root_domain *rd;
|
|
|
|
struct sched_domain __rcu *sd;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
|
|
|
|
unsigned long cpu_capacity;
|
|
|
|
unsigned long cpu_capacity_orig;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct callback_head *balance_callback;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2020-05-27 00:10:58 +08:00
|
|
|
unsigned char nohz_idle_balance;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned char idle_balance;
|
2015-06-11 20:46:37 +08:00
|
|
|
|
2018-07-04 18:17:40 +08:00
|
|
|
unsigned long misfit_task_load;
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
/* For active balancing */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int active_balance;
|
|
|
|
int push_cpu;
|
|
|
|
struct cpu_stop_work active_balance_work;
|
|
|
|
|
|
|
|
/* CPU of this runqueue: */
|
|
|
|
int cpu;
|
|
|
|
int online;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2012-02-21 04:49:09 +08:00
|
|
|
struct list_head cfs_tasks;
|
|
|
|
|
2018-06-28 23:45:05 +08:00
|
|
|
struct sched_avg avg_rt;
|
2018-06-28 23:45:07 +08:00
|
|
|
struct sched_avg avg_dl;
|
2018-09-25 17:17:42 +08:00
|
|
|
#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
|
2018-06-28 23:45:09 +08:00
|
|
|
struct sched_avg avg_irq;
|
2020-02-22 08:52:05 +08:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_SCHED_THERMAL_PRESSURE
|
|
|
|
struct sched_avg avg_thermal;
|
2018-06-28 23:45:09 +08:00
|
|
|
#endif
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 idle_stamp;
|
|
|
|
u64 avg_idle;
|
2013-09-14 02:26:52 +08:00
|
|
|
|
sched/fair: Age the average idle time
This is a partial forward-port of Peter Ziljstra's work first posted
at:
https://lore.kernel.org/lkml/20180530142236.667774973@infradead.org/
Currently select_idle_cpu()'s proportional scheme uses the average idle
time *for when we are idle*, that is temporally challenged. When a CPU
is not at all idle, we'll happily continue using whatever value we did
see when the CPU goes idle. To fix this, introduce a separate average
idle and age it (the existing value still makes sense for things like
new-idle balancing, which happens when we do go idle).
The overall goal is to not spend more time scanning for idle CPUs than
we're idle for. Otherwise we're inhibiting work. This means that we need to
consider the cost over all the wake-ups between consecutive idle periods.
To track this, the scan cost is subtracted from the estimated average
idle time.
The impact of this patch is related to workloads that have domains that
are fully busy or overloaded. Without the patch, the scan depth may be
too high because a CPU is not reaching idle.
Due to the nature of the patch, this is a regression magnet. It
potentially wins when domains are almost fully busy or overloaded --
at that point searches are likely to fail but idle is not being aged
as CPUs are active so search depth is too large and useless. It will
potentially show regressions when there are idle CPUs and a deep search is
beneficial. This tbench result on a 2-socket broadwell machine partially
illustates the problem
5.13.0-rc2 5.13.0-rc2
vanilla sched-avgidle-v1r5
Hmean 1 445.02 ( 0.00%) 451.36 * 1.42%*
Hmean 2 830.69 ( 0.00%) 846.03 * 1.85%*
Hmean 4 1350.80 ( 0.00%) 1505.56 * 11.46%*
Hmean 8 2888.88 ( 0.00%) 2586.40 * -10.47%*
Hmean 16 5248.18 ( 0.00%) 5305.26 * 1.09%*
Hmean 32 8914.03 ( 0.00%) 9191.35 * 3.11%*
Hmean 64 10663.10 ( 0.00%) 10192.65 * -4.41%*
Hmean 128 18043.89 ( 0.00%) 18478.92 * 2.41%*
Hmean 256 16530.89 ( 0.00%) 17637.16 * 6.69%*
Hmean 320 16451.13 ( 0.00%) 17270.97 * 4.98%*
Note that 8 was a regression point where a deeper search would have helped
but it gains for high thread counts when searches are useless. Hackbench
is a more extreme example although not perfect as the tasks idle rapidly
hackbench-process-pipes
5.13.0-rc2 5.13.0-rc2
vanilla sched-avgidle-v1r5
Amean 1 0.3950 ( 0.00%) 0.3887 ( 1.60%)
Amean 4 0.9450 ( 0.00%) 0.9677 ( -2.40%)
Amean 7 1.4737 ( 0.00%) 1.4890 ( -1.04%)
Amean 12 2.3507 ( 0.00%) 2.3360 * 0.62%*
Amean 21 4.0807 ( 0.00%) 4.0993 * -0.46%*
Amean 30 5.6820 ( 0.00%) 5.7510 * -1.21%*
Amean 48 8.7913 ( 0.00%) 8.7383 ( 0.60%)
Amean 79 14.3880 ( 0.00%) 13.9343 * 3.15%*
Amean 110 21.2233 ( 0.00%) 19.4263 * 8.47%*
Amean 141 28.2930 ( 0.00%) 25.1003 * 11.28%*
Amean 172 34.7570 ( 0.00%) 30.7527 * 11.52%*
Amean 203 41.0083 ( 0.00%) 36.4267 * 11.17%*
Amean 234 47.7133 ( 0.00%) 42.0623 * 11.84%*
Amean 265 53.0353 ( 0.00%) 47.7720 * 9.92%*
Amean 296 60.0170 ( 0.00%) 53.4273 * 10.98%*
Stddev 1 0.0052 ( 0.00%) 0.0025 ( 51.57%)
Stddev 4 0.0357 ( 0.00%) 0.0370 ( -3.75%)
Stddev 7 0.0190 ( 0.00%) 0.0298 ( -56.64%)
Stddev 12 0.0064 ( 0.00%) 0.0095 ( -48.38%)
Stddev 21 0.0065 ( 0.00%) 0.0097 ( -49.28%)
Stddev 30 0.0185 ( 0.00%) 0.0295 ( -59.54%)
Stddev 48 0.0559 ( 0.00%) 0.0168 ( 69.92%)
Stddev 79 0.1559 ( 0.00%) 0.0278 ( 82.17%)
Stddev 110 1.1728 ( 0.00%) 0.0532 ( 95.47%)
Stddev 141 0.7867 ( 0.00%) 0.0968 ( 87.69%)
Stddev 172 1.0255 ( 0.00%) 0.0420 ( 95.91%)
Stddev 203 0.8106 ( 0.00%) 0.1384 ( 82.92%)
Stddev 234 1.1949 ( 0.00%) 0.1328 ( 88.89%)
Stddev 265 0.9231 ( 0.00%) 0.0820 ( 91.11%)
Stddev 296 1.0456 ( 0.00%) 0.1327 ( 87.31%)
Again, higher thread counts benefit and the standard deviation
shows that results are also a lot more stable when the idle
time is aged.
The patch potentially matters when a socket was multiple LLCs as the
maximum search depth is lower. However, some of the test results were
suspiciously good (e.g. specjbb2005 gaining 50% on a Zen1 machine) and
other results were not dramatically different to other mcahines.
Given the nature of the patch, Peter's full series is not being forward
ported as each part should stand on its own. Preferably they would be
merged at different times to reduce the risk of false bisections.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210615111611.GH30378@techsingularity.net
2021-06-15 19:16:11 +08:00
|
|
|
unsigned long wake_stamp;
|
|
|
|
u64 wake_avg_idle;
|
|
|
|
|
2013-09-14 02:26:52 +08:00
|
|
|
/* This is used to determine avg_idle's max value */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 max_idle_balance_cost;
|
2020-09-14 20:47:28 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
|
|
struct rcuwait hotplug_wait;
|
|
|
|
#endif
|
2020-03-27 18:44:56 +08:00
|
|
|
#endif /* CONFIG_SMP */
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 prev_irq_time;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PARAVIRT
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 prev_steal_time;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
u64 prev_steal_time_rq;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/* calc_load related fields */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned long calc_load_update;
|
|
|
|
long calc_load_active;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SCHED_HRTICK
|
|
|
|
#ifdef CONFIG_SMP
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
call_single_data_t hrtick_csd;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct hrtimer hrtick_timer;
|
2021-02-08 15:35:53 +08:00
|
|
|
ktime_t hrtick_time;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_SCHEDSTATS
|
|
|
|
/* latency stats */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct sched_info rq_sched_info;
|
|
|
|
unsigned long long rq_cpu_time;
|
2011-10-25 16:00:11 +08:00
|
|
|
/* could above be rq->cfs_rq.exec_clock + rq->rt_rq.rt_runtime ? */
|
|
|
|
|
|
|
|
/* sys_sched_yield() stats */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int yld_count;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
/* schedule() stats */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int sched_count;
|
|
|
|
unsigned int sched_goidle;
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
/* try_to_wake_up() stats */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int ttwu_count;
|
|
|
|
unsigned int ttwu_local;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
2014-09-04 23:32:09 +08:00
|
|
|
#ifdef CONFIG_CPU_IDLE
|
|
|
|
/* Must be inspected within a rcu lock section */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct cpuidle_state *idle_state;
|
2014-09-04 23:32:09 +08:00
|
|
|
#endif
|
2020-08-26 20:08:10 +08:00
|
|
|
|
2020-11-19 03:48:42 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2020-08-26 20:08:10 +08:00
|
|
|
unsigned int nr_pinned;
|
|
|
|
#endif
|
2020-09-28 23:06:07 +08:00
|
|
|
unsigned int push_busy;
|
|
|
|
struct cpu_stop_work push_work;
|
2020-11-18 07:19:34 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SCHED_CORE
|
|
|
|
/* per rq */
|
|
|
|
struct rq *core;
|
2020-11-18 07:19:37 +08:00
|
|
|
struct task_struct *core_pick;
|
2020-11-18 07:19:34 +08:00
|
|
|
unsigned int core_enabled;
|
2020-11-18 07:19:37 +08:00
|
|
|
unsigned int core_sched_seq;
|
2020-11-18 07:19:36 +08:00
|
|
|
struct rb_root core_tree;
|
|
|
|
|
2021-08-19 19:09:17 +08:00
|
|
|
/* shared state -- careful with sched_core_cpu_deactivate() */
|
2020-11-18 07:19:36 +08:00
|
|
|
unsigned int core_task_seq;
|
2020-11-18 07:19:37 +08:00
|
|
|
unsigned int core_pick_seq;
|
|
|
|
unsigned long core_cookie;
|
2021-10-19 04:34:28 +08:00
|
|
|
unsigned int core_forceidle_count;
|
sched/fair: Snapshot the min_vruntime of CPUs on force idle
During force-idle, we end up doing cross-cpu comparison of vruntimes
during pick_next_task. If we simply compare (vruntime-min_vruntime)
across CPUs, and if the CPUs only have 1 task each, we will always
end up comparing 0 with 0 and pick just one of the tasks all the time.
This starves the task that was not picked. To fix this, take a snapshot
of the min_vruntime when entering force idle and use it for comparison.
This min_vruntime snapshot will only be used for cross-CPU vruntime
comparison, and nothing else.
A note about the min_vruntime snapshot and force idling:
During selection:
When we're not fi, we need to update snapshot.
when we're fi and we were not fi, we must update snapshot.
When we're fi and we were already fi, we must not update snapshot.
Which gives:
fib fi update
0 0 1
0 1 1
1 0 1
1 1 0
Where:
fi: force-idled now
fib: force-idled before
So the min_vruntime snapshot needs to be updated when: !(fib && fi).
Also, the cfs_prio_less() function needs to be aware of whether the
core is in force idle or not, since it will be use this information to
know whether to advance a cfs_rq's min_vruntime_fi in the hierarchy.
So pass this information along via pick_task() -> prio_less().
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.738542617@infradead.org
2020-11-18 07:19:39 +08:00
|
|
|
unsigned int core_forceidle_seq;
|
2021-10-19 04:34:28 +08:00
|
|
|
unsigned int core_forceidle_occupation;
|
|
|
|
u64 core_forceidle_start;
|
2020-11-18 07:19:34 +08:00
|
|
|
#endif
|
2011-10-25 16:00:11 +08:00
|
|
|
};
|
|
|
|
|
2019-01-23 23:26:52 +08:00
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
|
|
|
|
|
|
|
/* CPU runqueue to which this cfs_rq is attached */
|
|
|
|
static inline struct rq *rq_of(struct cfs_rq *cfs_rq)
|
|
|
|
{
|
|
|
|
return cfs_rq->rq;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
static inline struct rq *rq_of(struct cfs_rq *cfs_rq)
|
|
|
|
{
|
|
|
|
return container_of(cfs_rq, struct rq, cfs);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
static inline int cpu_of(struct rq *rq)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
return rq->cpu;
|
|
|
|
#else
|
|
|
|
return 0;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
2020-09-28 23:06:07 +08:00
|
|
|
#define MDF_PUSH 0x01
|
|
|
|
|
|
|
|
static inline bool is_migration_disabled(struct task_struct *p)
|
|
|
|
{
|
2020-11-19 03:48:42 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2020-09-28 23:06:07 +08:00
|
|
|
return p->migration_disabled;
|
|
|
|
#else
|
|
|
|
return false;
|
|
|
|
#endif
|
|
|
|
}
|
2016-05-09 16:38:41 +08:00
|
|
|
|
2021-03-25 05:40:13 +08:00
|
|
|
struct sched_group;
|
2020-11-18 07:19:34 +08:00
|
|
|
#ifdef CONFIG_SCHED_CORE
|
2021-03-25 05:40:13 +08:00
|
|
|
static inline struct cpumask *sched_group_span(struct sched_group *sg);
|
2020-11-18 07:19:34 +08:00
|
|
|
|
|
|
|
DECLARE_STATIC_KEY_FALSE(__sched_core_enabled);
|
|
|
|
|
|
|
|
static inline bool sched_core_enabled(struct rq *rq)
|
|
|
|
{
|
|
|
|
return static_branch_unlikely(&__sched_core_enabled) && rq->core_enabled;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool sched_core_disabled(void)
|
|
|
|
{
|
|
|
|
return !static_branch_unlikely(&__sched_core_enabled);
|
|
|
|
}
|
|
|
|
|
2021-03-03 23:45:41 +08:00
|
|
|
/*
|
|
|
|
* Be careful with this function; not for general use. The return value isn't
|
|
|
|
* stable unless you actually hold a relevant rq->__lock.
|
|
|
|
*/
|
2020-11-18 07:19:34 +08:00
|
|
|
static inline raw_spinlock_t *rq_lockp(struct rq *rq)
|
|
|
|
{
|
|
|
|
if (sched_core_enabled(rq))
|
|
|
|
return &rq->core->__lock;
|
|
|
|
|
|
|
|
return &rq->__lock;
|
|
|
|
}
|
|
|
|
|
2021-03-03 23:45:41 +08:00
|
|
|
static inline raw_spinlock_t *__rq_lockp(struct rq *rq)
|
|
|
|
{
|
|
|
|
if (rq->core_enabled)
|
|
|
|
return &rq->core->__lock;
|
|
|
|
|
|
|
|
return &rq->__lock;
|
|
|
|
}
|
|
|
|
|
sched/fair: Snapshot the min_vruntime of CPUs on force idle
During force-idle, we end up doing cross-cpu comparison of vruntimes
during pick_next_task. If we simply compare (vruntime-min_vruntime)
across CPUs, and if the CPUs only have 1 task each, we will always
end up comparing 0 with 0 and pick just one of the tasks all the time.
This starves the task that was not picked. To fix this, take a snapshot
of the min_vruntime when entering force idle and use it for comparison.
This min_vruntime snapshot will only be used for cross-CPU vruntime
comparison, and nothing else.
A note about the min_vruntime snapshot and force idling:
During selection:
When we're not fi, we need to update snapshot.
when we're fi and we were not fi, we must update snapshot.
When we're fi and we were already fi, we must not update snapshot.
Which gives:
fib fi update
0 0 1
0 1 1
1 0 1
1 1 0
Where:
fi: force-idled now
fib: force-idled before
So the min_vruntime snapshot needs to be updated when: !(fib && fi).
Also, the cfs_prio_less() function needs to be aware of whether the
core is in force idle or not, since it will be use this information to
know whether to advance a cfs_rq's min_vruntime_fi in the hierarchy.
So pass this information along via pick_task() -> prio_less().
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.738542617@infradead.org
2020-11-18 07:19:39 +08:00
|
|
|
bool cfs_prio_less(struct task_struct *a, struct task_struct *b, bool fi);
|
|
|
|
|
2021-03-25 05:40:13 +08:00
|
|
|
/*
|
|
|
|
* Helpers to check if the CPU's core cookie matches with the task's cookie
|
|
|
|
* when core scheduling is enabled.
|
|
|
|
* A special case is that the task's cookie always matches with CPU's core
|
|
|
|
* cookie if the CPU is in an idle core.
|
|
|
|
*/
|
|
|
|
static inline bool sched_cpu_cookie_match(struct rq *rq, struct task_struct *p)
|
|
|
|
{
|
|
|
|
/* Ignore cookie match if core scheduler is not enabled on the CPU. */
|
|
|
|
if (!sched_core_enabled(rq))
|
|
|
|
return true;
|
|
|
|
|
|
|
|
return rq->core->core_cookie == p->core_cookie;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool sched_core_cookie_match(struct rq *rq, struct task_struct *p)
|
|
|
|
{
|
|
|
|
bool idle_core = true;
|
|
|
|
int cpu;
|
|
|
|
|
|
|
|
/* Ignore cookie match if core scheduler is not enabled on the CPU. */
|
|
|
|
if (!sched_core_enabled(rq))
|
|
|
|
return true;
|
|
|
|
|
|
|
|
for_each_cpu(cpu, cpu_smt_mask(cpu_of(rq))) {
|
|
|
|
if (!available_idle_cpu(cpu)) {
|
|
|
|
idle_core = false;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* A CPU in an idle core is always the best choice for tasks with
|
|
|
|
* cookies.
|
|
|
|
*/
|
|
|
|
return idle_core || rq->core->core_cookie == p->core_cookie;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool sched_group_cookie_match(struct rq *rq,
|
|
|
|
struct task_struct *p,
|
|
|
|
struct sched_group *group)
|
|
|
|
{
|
|
|
|
int cpu;
|
|
|
|
|
|
|
|
/* Ignore cookie match if core scheduler is not enabled on the CPU. */
|
|
|
|
if (!sched_core_enabled(rq))
|
|
|
|
return true;
|
|
|
|
|
|
|
|
for_each_cpu_and(cpu, sched_group_span(group), p->cpus_ptr) {
|
|
|
|
if (sched_core_cookie_match(rq, p))
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2020-11-18 07:19:43 +08:00
|
|
|
extern void queue_core_balance(struct rq *rq);
|
|
|
|
|
2021-03-27 01:55:06 +08:00
|
|
|
static inline bool sched_core_enqueued(struct task_struct *p)
|
|
|
|
{
|
|
|
|
return !RB_EMPTY_NODE(&p->core_node);
|
|
|
|
}
|
|
|
|
|
|
|
|
extern void sched_core_enqueue(struct rq *rq, struct task_struct *p);
|
2021-10-19 04:34:28 +08:00
|
|
|
extern void sched_core_dequeue(struct rq *rq, struct task_struct *p, int flags);
|
2021-03-27 01:55:06 +08:00
|
|
|
|
|
|
|
extern void sched_core_get(void);
|
|
|
|
extern void sched_core_put(void);
|
|
|
|
|
2020-11-18 07:19:34 +08:00
|
|
|
#else /* !CONFIG_SCHED_CORE */
|
|
|
|
|
|
|
|
static inline bool sched_core_enabled(struct rq *rq)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2021-03-02 19:16:48 +08:00
|
|
|
static inline bool sched_core_disabled(void)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2021-03-02 19:13:13 +08:00
|
|
|
static inline raw_spinlock_t *rq_lockp(struct rq *rq)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
return &rq->__lock;
|
2021-03-02 19:13:13 +08:00
|
|
|
}
|
|
|
|
|
2021-03-03 23:45:41 +08:00
|
|
|
static inline raw_spinlock_t *__rq_lockp(struct rq *rq)
|
|
|
|
{
|
|
|
|
return &rq->__lock;
|
|
|
|
}
|
|
|
|
|
2020-11-18 07:19:43 +08:00
|
|
|
static inline void queue_core_balance(struct rq *rq)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2021-03-25 05:40:13 +08:00
|
|
|
static inline bool sched_cpu_cookie_match(struct rq *rq, struct task_struct *p)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool sched_core_cookie_match(struct rq *rq, struct task_struct *p)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool sched_group_cookie_match(struct rq *rq,
|
|
|
|
struct task_struct *p,
|
|
|
|
struct sched_group *group)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
2020-11-18 07:19:34 +08:00
|
|
|
#endif /* CONFIG_SCHED_CORE */
|
|
|
|
|
2021-03-02 19:13:13 +08:00
|
|
|
static inline void lockdep_assert_rq_held(struct rq *rq)
|
|
|
|
{
|
2021-03-03 23:45:41 +08:00
|
|
|
lockdep_assert_held(__rq_lockp(rq));
|
2021-03-02 19:13:13 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
extern void raw_spin_rq_lock_nested(struct rq *rq, int subclass);
|
|
|
|
extern bool raw_spin_rq_trylock(struct rq *rq);
|
|
|
|
extern void raw_spin_rq_unlock(struct rq *rq);
|
|
|
|
|
|
|
|
static inline void raw_spin_rq_lock(struct rq *rq)
|
|
|
|
{
|
|
|
|
raw_spin_rq_lock_nested(rq, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void raw_spin_rq_lock_irq(struct rq *rq)
|
|
|
|
{
|
|
|
|
local_irq_disable();
|
|
|
|
raw_spin_rq_lock(rq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void raw_spin_rq_unlock_irq(struct rq *rq)
|
|
|
|
{
|
|
|
|
raw_spin_rq_unlock(rq);
|
|
|
|
local_irq_enable();
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned long _raw_spin_rq_lock_irqsave(struct rq *rq)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
raw_spin_rq_lock(rq);
|
|
|
|
return flags;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void raw_spin_rq_unlock_irqrestore(struct rq *rq, unsigned long flags)
|
|
|
|
{
|
|
|
|
raw_spin_rq_unlock(rq);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define raw_spin_rq_lock_irqsave(rq, flags) \
|
|
|
|
do { \
|
|
|
|
flags = _raw_spin_rq_lock_irqsave(rq); \
|
|
|
|
} while (0)
|
|
|
|
|
2016-05-09 16:38:41 +08:00
|
|
|
#ifdef CONFIG_SCHED_SMT
|
|
|
|
extern void __update_idle_core(struct rq *rq);
|
|
|
|
|
|
|
|
static inline void update_idle_core(struct rq *rq)
|
|
|
|
{
|
|
|
|
if (static_branch_unlikely(&sched_smt_present))
|
|
|
|
__update_idle_core(rq);
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
static inline void update_idle_core(struct rq *rq) { }
|
|
|
|
#endif
|
|
|
|
|
2014-08-14 01:28:12 +08:00
|
|
|
DECLARE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2011-12-07 22:07:31 +08:00
|
|
|
#define cpu_rq(cpu) (&per_cpu(runqueues, (cpu)))
|
2014-08-18 01:30:27 +08:00
|
|
|
#define this_rq() this_cpu_ptr(&runqueues)
|
2011-12-07 22:07:31 +08:00
|
|
|
#define task_rq(p) cpu_rq(task_cpu(p))
|
|
|
|
#define cpu_curr(cpu) (cpu_rq(cpu)->curr)
|
2014-08-18 01:30:27 +08:00
|
|
|
#define raw_rq() raw_cpu_ptr(&runqueues)
|
2011-12-07 22:07:31 +08:00
|
|
|
|
2020-11-18 07:19:36 +08:00
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
|
|
|
static inline struct task_struct *task_of(struct sched_entity *se)
|
|
|
|
{
|
|
|
|
SCHED_WARN_ON(!entity_is_task(se));
|
|
|
|
return container_of(se, struct task_struct, se);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct cfs_rq *task_cfs_rq(struct task_struct *p)
|
|
|
|
{
|
|
|
|
return p->se.cfs_rq;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* runqueue on which this entity is (to be) queued */
|
|
|
|
static inline struct cfs_rq *cfs_rq_of(struct sched_entity *se)
|
|
|
|
{
|
|
|
|
return se->cfs_rq;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* runqueue "owned" by this group */
|
|
|
|
static inline struct cfs_rq *group_cfs_rq(struct sched_entity *grp)
|
|
|
|
{
|
|
|
|
return grp->my_q;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
static inline struct task_struct *task_of(struct sched_entity *se)
|
|
|
|
{
|
|
|
|
return container_of(se, struct task_struct, se);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct cfs_rq *task_cfs_rq(struct task_struct *p)
|
|
|
|
{
|
|
|
|
return &task_rq(p)->cfs;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct cfs_rq *cfs_rq_of(struct sched_entity *se)
|
|
|
|
{
|
|
|
|
struct task_struct *p = task_of(se);
|
|
|
|
struct rq *rq = task_rq(p);
|
|
|
|
|
|
|
|
return &rq->cfs;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* runqueue "owned" by this group */
|
|
|
|
static inline struct cfs_rq *group_cfs_rq(struct sched_entity *grp)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2018-10-27 06:06:19 +08:00
|
|
|
extern void update_rq_clock(struct rq *rq);
|
|
|
|
|
2016-09-21 21:38:13 +08:00
|
|
|
/*
|
|
|
|
* rq::clock_update_flags bits
|
|
|
|
*
|
|
|
|
* %RQCF_REQ_SKIP - will request skipping of clock update on the next
|
|
|
|
* call to __schedule(). This is an optimisation to avoid
|
|
|
|
* neighbouring rq clock updates.
|
|
|
|
*
|
|
|
|
* %RQCF_ACT_SKIP - is set from inside of __schedule() when skipping is
|
|
|
|
* in effect and calls to update_rq_clock() are being ignored.
|
|
|
|
*
|
|
|
|
* %RQCF_UPDATED - is a debug flag that indicates whether a call has been
|
|
|
|
* made to update_rq_clock() since the last time rq::lock was pinned.
|
|
|
|
*
|
|
|
|
* If inside of __schedule(), clock_update_flags will have been
|
|
|
|
* shifted left (a left shift is a cheap operation for the fast path
|
|
|
|
* to promote %RQCF_REQ_SKIP to %RQCF_ACT_SKIP), so you must use,
|
|
|
|
*
|
|
|
|
* if (rq-clock_update_flags >= RQCF_UPDATED)
|
|
|
|
*
|
2021-03-18 20:38:50 +08:00
|
|
|
* to check if %RQCF_UPDATED is set. It'll never be shifted more than
|
2016-09-21 21:38:13 +08:00
|
|
|
* one position though, because the next rq_unpin_lock() will shift it
|
|
|
|
* back.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
#define RQCF_REQ_SKIP 0x01
|
|
|
|
#define RQCF_ACT_SKIP 0x02
|
|
|
|
#define RQCF_UPDATED 0x04
|
2016-09-21 21:38:13 +08:00
|
|
|
|
|
|
|
static inline void assert_clock_updated(struct rq *rq)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* The only reason for not seeing a clock update since the
|
|
|
|
* last rq_pin_lock() is if we're currently skipping updates.
|
|
|
|
*/
|
|
|
|
SCHED_WARN_ON(rq->clock_update_flags < RQCF_ACT_SKIP);
|
|
|
|
}
|
|
|
|
|
2013-04-12 07:51:02 +08:00
|
|
|
static inline u64 rq_clock(struct rq *rq)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
lockdep_assert_rq_held(rq);
|
2016-09-21 21:38:13 +08:00
|
|
|
assert_clock_updated(rq);
|
|
|
|
|
2013-04-12 07:51:02 +08:00
|
|
|
return rq->clock;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u64 rq_clock_task(struct rq *rq)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
lockdep_assert_rq_held(rq);
|
2016-09-21 21:38:13 +08:00
|
|
|
assert_clock_updated(rq);
|
|
|
|
|
2013-04-12 07:51:02 +08:00
|
|
|
return rq->clock_task;
|
|
|
|
}
|
|
|
|
|
2020-02-22 08:52:13 +08:00
|
|
|
/**
|
|
|
|
* By default the decay is the default pelt decay period.
|
|
|
|
* The decay shift can change the decay period in
|
|
|
|
* multiples of 32.
|
|
|
|
* Decay shift Decay period(ms)
|
|
|
|
* 0 32
|
|
|
|
* 1 64
|
|
|
|
* 2 128
|
|
|
|
* 3 256
|
|
|
|
* 4 512
|
|
|
|
*/
|
|
|
|
extern int sched_thermal_decay_shift;
|
|
|
|
|
|
|
|
static inline u64 rq_clock_thermal(struct rq *rq)
|
|
|
|
{
|
|
|
|
return rq_clock_task(rq) >> sched_thermal_decay_shift;
|
|
|
|
}
|
|
|
|
|
2018-04-05 00:15:39 +08:00
|
|
|
static inline void rq_clock_skip_update(struct rq *rq)
|
2015-01-05 18:18:11 +08:00
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
lockdep_assert_rq_held(rq);
|
2018-04-05 00:15:39 +08:00
|
|
|
rq->clock_update_flags |= RQCF_REQ_SKIP;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2018-05-31 06:49:40 +08:00
|
|
|
* See rt task throttling, which is the only time a skip
|
2021-03-18 20:38:50 +08:00
|
|
|
* request is canceled.
|
2018-04-05 00:15:39 +08:00
|
|
|
*/
|
|
|
|
static inline void rq_clock_cancel_skipupdate(struct rq *rq)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
lockdep_assert_rq_held(rq);
|
2018-04-05 00:15:39 +08:00
|
|
|
rq->clock_update_flags &= ~RQCF_REQ_SKIP;
|
2015-01-05 18:18:11 +08:00
|
|
|
}
|
|
|
|
|
2016-09-21 21:38:10 +08:00
|
|
|
struct rq_flags {
|
|
|
|
unsigned long flags;
|
|
|
|
struct pin_cookie cookie;
|
2016-09-21 21:38:13 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
/*
|
|
|
|
* A copy of (rq::clock_update_flags & RQCF_UPDATED) for the
|
|
|
|
* current pin context is stashed here in case it needs to be
|
|
|
|
* restored in rq_repin_lock().
|
|
|
|
*/
|
|
|
|
unsigned int clock_update_flags;
|
|
|
|
#endif
|
2016-09-21 21:38:10 +08:00
|
|
|
};
|
|
|
|
|
2020-12-11 00:14:08 +08:00
|
|
|
extern struct callback_head balance_push_callback;
|
|
|
|
|
2020-07-02 20:52:11 +08:00
|
|
|
/*
|
|
|
|
* Lockdep annotation that avoids accidental unlocks; it's like a
|
|
|
|
* sticky/continuous lockdep_assert_held().
|
|
|
|
*
|
|
|
|
* This avoids code that has access to 'struct rq *rq' (basically everything in
|
|
|
|
* the scheduler) from accidentally unlocking the rq if they do not also have a
|
|
|
|
* copy of the (on-stack) 'struct rq_flags rf'.
|
|
|
|
*
|
|
|
|
* Also see Documentation/locking/lockdep-design.rst.
|
|
|
|
*/
|
2016-09-21 21:38:10 +08:00
|
|
|
static inline void rq_pin_lock(struct rq *rq, struct rq_flags *rf)
|
|
|
|
{
|
2021-03-03 23:45:41 +08:00
|
|
|
rf->cookie = lockdep_pin_lock(__rq_lockp(rq));
|
2016-09-21 21:38:13 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
rq->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP);
|
|
|
|
rf->clock_update_flags = 0;
|
2020-05-11 20:13:00 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2020-12-11 00:14:08 +08:00
|
|
|
SCHED_WARN_ON(rq->balance_callback && rq->balance_callback != &balance_push_callback);
|
|
|
|
#endif
|
2020-05-11 20:13:00 +08:00
|
|
|
#endif
|
2016-09-21 21:38:10 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void rq_unpin_lock(struct rq *rq, struct rq_flags *rf)
|
|
|
|
{
|
2016-09-21 21:38:13 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
if (rq->clock_update_flags > RQCF_ACT_SKIP)
|
|
|
|
rf->clock_update_flags = RQCF_UPDATED;
|
|
|
|
#endif
|
|
|
|
|
2021-03-03 23:45:41 +08:00
|
|
|
lockdep_unpin_lock(__rq_lockp(rq), rf->cookie);
|
2016-09-21 21:38:10 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void rq_repin_lock(struct rq *rq, struct rq_flags *rf)
|
|
|
|
{
|
2021-03-03 23:45:41 +08:00
|
|
|
lockdep_repin_lock(__rq_lockp(rq), rf->cookie);
|
2016-09-21 21:38:13 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
/*
|
|
|
|
* Restore the value we stashed in @rf for this pin context.
|
|
|
|
*/
|
|
|
|
rq->clock_update_flags |= rf->clock_update_flags;
|
|
|
|
#endif
|
2016-09-21 21:38:10 +08:00
|
|
|
}
|
|
|
|
|
2018-10-27 06:06:19 +08:00
|
|
|
struct rq *__task_rq_lock(struct task_struct *p, struct rq_flags *rf)
|
|
|
|
__acquires(rq->lock);
|
|
|
|
|
|
|
|
struct rq *task_rq_lock(struct task_struct *p, struct rq_flags *rf)
|
|
|
|
__acquires(p->pi_lock)
|
|
|
|
__acquires(rq->lock);
|
|
|
|
|
|
|
|
static inline void __task_rq_unlock(struct rq *rq, struct rq_flags *rf)
|
|
|
|
__releases(rq->lock)
|
|
|
|
{
|
|
|
|
rq_unpin_lock(rq, rf);
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock(rq);
|
2018-10-27 06:06:19 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
task_rq_unlock(struct rq *rq, struct task_struct *p, struct rq_flags *rf)
|
|
|
|
__releases(rq->lock)
|
|
|
|
__releases(p->pi_lock)
|
|
|
|
{
|
|
|
|
rq_unpin_lock(rq, rf);
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock(rq);
|
2018-10-27 06:06:19 +08:00
|
|
|
raw_spin_unlock_irqrestore(&p->pi_lock, rf->flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
rq_lock_irqsave(struct rq *rq, struct rq_flags *rf)
|
|
|
|
__acquires(rq->lock)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_lock_irqsave(rq, rf->flags);
|
2018-10-27 06:06:19 +08:00
|
|
|
rq_pin_lock(rq, rf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
rq_lock_irq(struct rq *rq, struct rq_flags *rf)
|
|
|
|
__acquires(rq->lock)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_lock_irq(rq);
|
2018-10-27 06:06:19 +08:00
|
|
|
rq_pin_lock(rq, rf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
rq_lock(struct rq *rq, struct rq_flags *rf)
|
|
|
|
__acquires(rq->lock)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_lock(rq);
|
2018-10-27 06:06:19 +08:00
|
|
|
rq_pin_lock(rq, rf);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
rq_unlock_irqrestore(struct rq *rq, struct rq_flags *rf)
|
|
|
|
__releases(rq->lock)
|
|
|
|
{
|
|
|
|
rq_unpin_lock(rq, rf);
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock_irqrestore(rq, rf->flags);
|
2018-10-27 06:06:19 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
rq_unlock_irq(struct rq *rq, struct rq_flags *rf)
|
|
|
|
__releases(rq->lock)
|
|
|
|
{
|
|
|
|
rq_unpin_lock(rq, rf);
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock_irq(rq);
|
2018-10-27 06:06:19 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
rq_unlock(struct rq *rq, struct rq_flags *rf)
|
|
|
|
__releases(rq->lock)
|
|
|
|
{
|
|
|
|
rq_unpin_lock(rq, rf);
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock(rq);
|
2018-10-27 06:06:19 +08:00
|
|
|
}
|
|
|
|
|
2018-10-27 06:06:23 +08:00
|
|
|
static inline struct rq *
|
|
|
|
this_rq_lock_irq(struct rq_flags *rf)
|
|
|
|
__acquires(rq->lock)
|
|
|
|
{
|
|
|
|
struct rq *rq;
|
|
|
|
|
|
|
|
local_irq_disable();
|
|
|
|
rq = this_rq();
|
|
|
|
rq_lock(rq, rf);
|
|
|
|
return rq;
|
|
|
|
}
|
|
|
|
|
2014-10-17 15:29:49 +08:00
|
|
|
#ifdef CONFIG_NUMA
|
2014-10-17 15:29:50 +08:00
|
|
|
enum numa_topology_type {
|
|
|
|
NUMA_DIRECT,
|
|
|
|
NUMA_GLUELESS_MESH,
|
|
|
|
NUMA_BACKPLANE,
|
|
|
|
};
|
|
|
|
extern enum numa_topology_type sched_numa_topology_type;
|
2014-10-17 15:29:49 +08:00
|
|
|
extern int sched_max_numa_distance;
|
|
|
|
extern bool find_numa_distance(int distance);
|
sched/numa: Fix NUMA topology for systems with CPU-less nodes
The NUMA topology parameters (sched_numa_topology_type,
sched_domains_numa_levels, and sched_max_numa_distance, etc.)
identified by scheduler may be wrong for systems with CPU-less nodes.
For example, the ACPI SLIT of a system with CPU-less persistent
memory (Intel Optane DCPMM) nodes is as follows,
[000h 0000 4] Signature : "SLIT" [System Locality Information Table]
[004h 0004 4] Table Length : 0000042C
[008h 0008 1] Revision : 01
[009h 0009 1] Checksum : 59
[00Ah 0010 6] Oem ID : "XXXX"
[010h 0016 8] Oem Table ID : "XXXXXXX"
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "INTL"
[020h 0032 4] Asl Compiler Revision : 20091013
[024h 0036 8] Localities : 0000000000000004
[02Ch 0044 4] Locality 0 : 0A 15 11 1C
[030h 0048 4] Locality 1 : 15 0A 1C 11
[034h 0052 4] Locality 2 : 11 1C 0A 1C
[038h 0056 4] Locality 3 : 1C 11 1C 0A
While the `numactl -H` output is as follows,
available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
node 0 size: 64136 MB
node 0 free: 5981 MB
node 1 cpus: 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
node 1 size: 64466 MB
node 1 free: 10415 MB
node 2 cpus:
node 2 size: 253952 MB
node 2 free: 253920 MB
node 3 cpus:
node 3 size: 253952 MB
node 3 free: 253951 MB
node distances:
node 0 1 2 3
0: 10 21 17 28
1: 21 10 28 17
2: 17 28 10 28
3: 28 17 28 10
In this system, there are only 2 sockets. In each memory controller,
both DRAM and PMEM DIMMs are installed. Although the physical NUMA
topology is simple, the logical NUMA topology becomes a little
complex. Because both the distance(0, 1) and distance (1, 3) are less
than the distance (0, 3), it appears that node 1 sits between node 0
and node 3. And the whole system appears to be a glueless mesh NUMA
topology type. But it's definitely not, there is even no CPU in node 3.
This isn't a practical problem now yet. Because the PMEM nodes (node
2 and node 3 in example system) are offlined by default during system
boot. So init_numa_topology_type() called during system boot will
ignore them and set sched_numa_topology_type to NUMA_DIRECT. And
init_numa_topology_type() is only called at runtime when a CPU of a
never-onlined-before node gets plugged in. And there's no CPU in the
PMEM nodes. But it appears better to fix this to make the code more
robust.
To test the potential problem. We have used a debug patch to call
init_numa_topology_type() when the PMEM node is onlined (in
__set_migration_target_nodes()). With that, the NUMA parameters
identified by scheduler is as follows,
sched_numa_topology_type: NUMA_GLUELESS_MESH
sched_domains_numa_levels: 4
sched_max_numa_distance: 28
To fix the issue, the CPU-less nodes are ignored when the NUMA topology
parameters are identified. Because a node may become CPU-less or not
at run time because of CPU hotplug, the NUMA topology parameters need
to be re-initialized at runtime for CPU hotplug too.
With the patch, the NUMA parameters identified for the example system
above is as follows,
sched_numa_topology_type: NUMA_DIRECT
sched_domains_numa_levels: 2
sched_max_numa_distance: 21
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220214121553.582248-1-ying.huang@intel.com
2022-02-14 20:15:52 +08:00
|
|
|
extern void sched_init_numa(int offline_node);
|
|
|
|
extern void sched_update_numa(int cpu, bool online);
|
2017-02-01 20:10:18 +08:00
|
|
|
extern void sched_domains_numa_masks_set(unsigned int cpu);
|
|
|
|
extern void sched_domains_numa_masks_clear(unsigned int cpu);
|
2019-06-28 16:51:41 +08:00
|
|
|
extern int sched_numa_find_closest(const struct cpumask *cpus, int cpu);
|
2017-02-01 20:10:18 +08:00
|
|
|
#else
|
sched/numa: Fix NUMA topology for systems with CPU-less nodes
The NUMA topology parameters (sched_numa_topology_type,
sched_domains_numa_levels, and sched_max_numa_distance, etc.)
identified by scheduler may be wrong for systems with CPU-less nodes.
For example, the ACPI SLIT of a system with CPU-less persistent
memory (Intel Optane DCPMM) nodes is as follows,
[000h 0000 4] Signature : "SLIT" [System Locality Information Table]
[004h 0004 4] Table Length : 0000042C
[008h 0008 1] Revision : 01
[009h 0009 1] Checksum : 59
[00Ah 0010 6] Oem ID : "XXXX"
[010h 0016 8] Oem Table ID : "XXXXXXX"
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "INTL"
[020h 0032 4] Asl Compiler Revision : 20091013
[024h 0036 8] Localities : 0000000000000004
[02Ch 0044 4] Locality 0 : 0A 15 11 1C
[030h 0048 4] Locality 1 : 15 0A 1C 11
[034h 0052 4] Locality 2 : 11 1C 0A 1C
[038h 0056 4] Locality 3 : 1C 11 1C 0A
While the `numactl -H` output is as follows,
available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
node 0 size: 64136 MB
node 0 free: 5981 MB
node 1 cpus: 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
node 1 size: 64466 MB
node 1 free: 10415 MB
node 2 cpus:
node 2 size: 253952 MB
node 2 free: 253920 MB
node 3 cpus:
node 3 size: 253952 MB
node 3 free: 253951 MB
node distances:
node 0 1 2 3
0: 10 21 17 28
1: 21 10 28 17
2: 17 28 10 28
3: 28 17 28 10
In this system, there are only 2 sockets. In each memory controller,
both DRAM and PMEM DIMMs are installed. Although the physical NUMA
topology is simple, the logical NUMA topology becomes a little
complex. Because both the distance(0, 1) and distance (1, 3) are less
than the distance (0, 3), it appears that node 1 sits between node 0
and node 3. And the whole system appears to be a glueless mesh NUMA
topology type. But it's definitely not, there is even no CPU in node 3.
This isn't a practical problem now yet. Because the PMEM nodes (node
2 and node 3 in example system) are offlined by default during system
boot. So init_numa_topology_type() called during system boot will
ignore them and set sched_numa_topology_type to NUMA_DIRECT. And
init_numa_topology_type() is only called at runtime when a CPU of a
never-onlined-before node gets plugged in. And there's no CPU in the
PMEM nodes. But it appears better to fix this to make the code more
robust.
To test the potential problem. We have used a debug patch to call
init_numa_topology_type() when the PMEM node is onlined (in
__set_migration_target_nodes()). With that, the NUMA parameters
identified by scheduler is as follows,
sched_numa_topology_type: NUMA_GLUELESS_MESH
sched_domains_numa_levels: 4
sched_max_numa_distance: 28
To fix the issue, the CPU-less nodes are ignored when the NUMA topology
parameters are identified. Because a node may become CPU-less or not
at run time because of CPU hotplug, the NUMA topology parameters need
to be re-initialized at runtime for CPU hotplug too.
With the patch, the NUMA parameters identified for the example system
above is as follows,
sched_numa_topology_type: NUMA_DIRECT
sched_domains_numa_levels: 2
sched_max_numa_distance: 21
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220214121553.582248-1-ying.huang@intel.com
2022-02-14 20:15:52 +08:00
|
|
|
static inline void sched_init_numa(int offline_node) { }
|
|
|
|
static inline void sched_update_numa(int cpu, bool online) { }
|
2017-02-01 20:10:18 +08:00
|
|
|
static inline void sched_domains_numa_masks_set(unsigned int cpu) { }
|
|
|
|
static inline void sched_domains_numa_masks_clear(unsigned int cpu) { }
|
2019-06-28 16:51:41 +08:00
|
|
|
static inline int sched_numa_find_closest(const struct cpumask *cpus, int cpu)
|
|
|
|
{
|
|
|
|
return nr_cpu_ids;
|
|
|
|
}
|
2017-02-01 20:10:18 +08:00
|
|
|
#endif
|
|
|
|
|
2013-10-07 18:28:57 +08:00
|
|
|
#ifdef CONFIG_NUMA_BALANCING
|
2014-10-31 08:13:31 +08:00
|
|
|
/* The regions in numa_faults array from task_struct */
|
|
|
|
enum numa_faults_stats {
|
|
|
|
NUMA_MEM = 0,
|
|
|
|
NUMA_CPU,
|
|
|
|
NUMA_MEMBUF,
|
|
|
|
NUMA_CPUBUF
|
|
|
|
};
|
2013-10-07 18:29:33 +08:00
|
|
|
extern void sched_setnuma(struct task_struct *p, int node);
|
2013-10-07 18:29:02 +08:00
|
|
|
extern int migrate_task_to(struct task_struct *p, int cpu);
|
2018-06-21 01:02:50 +08:00
|
|
|
extern int migrate_swap(struct task_struct *p, struct task_struct *t,
|
|
|
|
int cpu, int scpu);
|
2018-05-04 23:41:09 +08:00
|
|
|
extern void init_numa_balancing(unsigned long clone_flags, struct task_struct *p);
|
|
|
|
#else
|
|
|
|
static inline void
|
|
|
|
init_numa_balancing(unsigned long clone_flags, struct task_struct *p)
|
|
|
|
{
|
|
|
|
}
|
2013-10-07 18:28:57 +08:00
|
|
|
#endif /* CONFIG_NUMA_BALANCING */
|
|
|
|
|
2011-12-07 22:07:31 +08:00
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
|
2015-06-11 20:46:37 +08:00
|
|
|
static inline void
|
|
|
|
queue_balance_callback(struct rq *rq,
|
|
|
|
struct callback_head *head,
|
|
|
|
void (*func)(struct rq *rq))
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
lockdep_assert_rq_held(rq);
|
2015-06-11 20:46:37 +08:00
|
|
|
|
2020-12-11 00:14:08 +08:00
|
|
|
if (unlikely(head->next || rq->balance_callback == &balance_push_callback))
|
2015-06-11 20:46:37 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
head->func = (void (*)(struct callback_head *))func;
|
|
|
|
head->next = rq->balance_callback;
|
|
|
|
rq->balance_callback = head;
|
|
|
|
}
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#define rcu_dereference_check_sched_domain(p) \
|
|
|
|
rcu_dereference_check((p), \
|
|
|
|
lockdep_is_held(&sched_domains_mutex))
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The domain tree (rq->sd) is protected by RCU's quiescent state transition.
|
2018-11-07 11:10:53 +08:00
|
|
|
* See destroy_sched_domains: call_rcu for details.
|
2011-10-25 16:00:11 +08:00
|
|
|
*
|
|
|
|
* The domain tree of any CPU may only be accessed from within
|
|
|
|
* preempt-disabled sections.
|
|
|
|
*/
|
|
|
|
#define for_each_domain(cpu, __sd) \
|
2011-12-07 22:07:31 +08:00
|
|
|
for (__sd = rcu_dereference_check_sched_domain(cpu_rq(cpu)->sd); \
|
|
|
|
__sd; __sd = __sd->parent)
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2011-12-07 22:07:31 +08:00
|
|
|
/**
|
|
|
|
* highest_flag_domain - Return highest sched_domain containing flag.
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* @cpu: The CPU whose highest level of sched domain is to
|
2011-12-07 22:07:31 +08:00
|
|
|
* be returned.
|
|
|
|
* @flag: The flag to check for the highest sched_domain
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* for the given CPU.
|
2011-12-07 22:07:31 +08:00
|
|
|
*
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* Returns the highest sched_domain of a CPU which contains the given flag.
|
2011-12-07 22:07:31 +08:00
|
|
|
*/
|
|
|
|
static inline struct sched_domain *highest_flag_domain(int cpu, int flag)
|
|
|
|
{
|
|
|
|
struct sched_domain *sd, *hsd = NULL;
|
|
|
|
|
|
|
|
for_each_domain(cpu, sd) {
|
|
|
|
if (!(sd->flags & flag))
|
|
|
|
break;
|
|
|
|
hsd = sd;
|
|
|
|
}
|
|
|
|
|
|
|
|
return hsd;
|
|
|
|
}
|
|
|
|
|
2013-10-07 18:29:17 +08:00
|
|
|
static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
|
|
|
|
{
|
|
|
|
struct sched_domain *sd;
|
|
|
|
|
|
|
|
for_each_domain(cpu, sd) {
|
|
|
|
if (sd->flags & flag)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return sd;
|
|
|
|
}
|
|
|
|
|
2019-03-21 08:34:24 +08:00
|
|
|
DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
|
2013-07-04 12:56:46 +08:00
|
|
|
DECLARE_PER_CPU(int, sd_llc_size);
|
2011-12-07 22:07:31 +08:00
|
|
|
DECLARE_PER_CPU(int, sd_llc_id);
|
2019-03-21 08:34:24 +08:00
|
|
|
DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
|
|
|
|
DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
|
|
|
|
DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
|
|
|
|
DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
|
2018-07-04 18:17:39 +08:00
|
|
|
extern struct static_key_false sched_asym_cpucapacity;
|
2011-12-07 22:07:31 +08:00
|
|
|
|
2014-05-27 06:19:37 +08:00
|
|
|
struct sched_group_capacity {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
atomic_t ref;
|
2013-03-05 16:06:23 +08:00
|
|
|
/*
|
2016-04-05 12:12:27 +08:00
|
|
|
* CPU capacity of this group, SCHED_CAPACITY_SCALE being max capacity
|
2014-05-27 06:19:37 +08:00
|
|
|
* for a single CPU.
|
2013-03-05 16:06:23 +08:00
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned long capacity;
|
|
|
|
unsigned long min_capacity; /* Min per-CPU capacity in group */
|
2018-07-04 18:17:41 +08:00
|
|
|
unsigned long max_capacity; /* Max per-CPU capacity in group */
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned long next_update;
|
|
|
|
int imbalance; /* XXX unrelated to capacity but shared group state */
|
2013-03-05 16:06:23 +08:00
|
|
|
|
sched/topology: Add sched_group_capacity debugging
Add sgc::id to easier spot domain construction issues.
Take the opportunity to slightly rework the group printing, because
adding more "(id: %d)" strings makes the entire thing very hard to
read. Also the individual groups are very hard to separate, so add
explicit visual grouping, which allows replacing all the "(%s: %d)"
format things with shorter "%s=%d" variants.
Then fix up some inconsistencies in surrounding prints for domains.
The end result looks like:
[] CPU0 attaching sched-domain(s):
[] domain-0: span=0,4 level=DIE
[] groups: 0:{ span=0 }, 4:{ span=4 }
[] domain-1: span=0-1,3-5,7 level=NUMA
[] groups: 0:{ span=0,4 mask=0,4 cap=2048 }, 1:{ span=1,5 mask=1,5 cap=2048 }, 3:{ span=3,7 mask=3,7 cap=2048 }
[] domain-2: span=0-7 level=NUMA
[] groups: 0:{ span=0-1,3-5,7 mask=0,4 cap=6144 }, 2:{ span=1-3,5-7 mask=2,6 cap=6144 }
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-26 23:35:35 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int id;
|
sched/topology: Add sched_group_capacity debugging
Add sgc::id to easier spot domain construction issues.
Take the opportunity to slightly rework the group printing, because
adding more "(id: %d)" strings makes the entire thing very hard to
read. Also the individual groups are very hard to separate, so add
explicit visual grouping, which allows replacing all the "(%s: %d)"
format things with shorter "%s=%d" variants.
Then fix up some inconsistencies in surrounding prints for domains.
The end result looks like:
[] CPU0 attaching sched-domain(s):
[] domain-0: span=0,4 level=DIE
[] groups: 0:{ span=0 }, 4:{ span=4 }
[] domain-1: span=0-1,3-5,7 level=NUMA
[] groups: 0:{ span=0,4 mask=0,4 cap=2048 }, 1:{ span=1,5 mask=1,5 cap=2048 }, 3:{ span=3,7 mask=3,7 cap=2048 }
[] domain-2: span=0-7 level=NUMA
[] groups: 0:{ span=0-1,3-5,7 mask=0,4 cap=6144 }, 2:{ span=1-3,5-7 mask=2,6 cap=6144 }
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-26 23:35:35 +08:00
|
|
|
#endif
|
|
|
|
|
2020-10-14 22:02:20 +08:00
|
|
|
unsigned long cpumask[]; /* Balance mask */
|
2013-03-05 16:06:23 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct sched_group {
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
struct sched_group *next; /* Must be a circular list */
|
|
|
|
atomic_t ref;
|
2013-03-05 16:06:23 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int group_weight;
|
2014-05-27 06:19:37 +08:00
|
|
|
struct sched_group_capacity *sgc;
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int asym_prefer_cpu; /* CPU of highest priority in group */
|
2021-09-11 09:18:15 +08:00
|
|
|
int flags;
|
2013-03-05 16:06:23 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* The CPUs this group covers.
|
|
|
|
*
|
|
|
|
* NOTE: this field is variable length. (Allocated dynamically
|
|
|
|
* by attaching extra space to the end of the structure,
|
|
|
|
* depending on how many CPUs the kernel has booted up with)
|
|
|
|
*/
|
2020-05-08 03:21:41 +08:00
|
|
|
unsigned long cpumask[];
|
2013-03-05 16:06:23 +08:00
|
|
|
};
|
|
|
|
|
2017-05-01 17:03:12 +08:00
|
|
|
static inline struct cpumask *sched_group_span(struct sched_group *sg)
|
2013-03-05 16:06:23 +08:00
|
|
|
{
|
|
|
|
return to_cpumask(sg->cpumask);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2017-05-01 16:47:02 +08:00
|
|
|
* See build_balance_mask().
|
2013-03-05 16:06:23 +08:00
|
|
|
*/
|
2017-05-01 16:47:02 +08:00
|
|
|
static inline struct cpumask *group_balance_mask(struct sched_group *sg)
|
2013-03-05 16:06:23 +08:00
|
|
|
{
|
2014-05-27 06:19:37 +08:00
|
|
|
return to_cpumask(sg->sgc->cpumask);
|
2013-03-05 16:06:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* group_first_cpu - Returns the first CPU in the cpumask of a sched_group.
|
|
|
|
* @group: The group whose first CPU is to be returned.
|
2013-03-05 16:06:23 +08:00
|
|
|
*/
|
|
|
|
static inline unsigned int group_first_cpu(struct sched_group *group)
|
|
|
|
{
|
2017-05-01 17:03:12 +08:00
|
|
|
return cpumask_first(sched_group_span(group));
|
2013-03-05 16:06:23 +08:00
|
|
|
}
|
|
|
|
|
2012-05-31 20:47:33 +08:00
|
|
|
extern int group_balance_cpu(struct sched_group *sg);
|
|
|
|
|
2021-03-25 18:31:20 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
void update_sched_domain_debugfs(void);
|
2017-08-10 23:10:26 +08:00
|
|
|
void dirty_sched_domain_sysctl(int cpu);
|
2016-02-23 05:26:51 +08:00
|
|
|
#else
|
2021-03-25 18:31:20 +08:00
|
|
|
static inline void update_sched_domain_debugfs(void)
|
2016-02-23 05:26:51 +08:00
|
|
|
{
|
|
|
|
}
|
2017-08-10 23:10:26 +08:00
|
|
|
static inline void dirty_sched_domain_sysctl(int cpu)
|
|
|
|
{
|
|
|
|
}
|
2016-02-23 05:26:51 +08:00
|
|
|
#endif
|
|
|
|
|
2021-03-24 18:43:21 +08:00
|
|
|
extern int sched_update_scaling(void);
|
|
|
|
|
2020-05-27 00:11:01 +08:00
|
|
|
extern void flush_smp_call_function_from_idle(void);
|
2014-06-05 01:31:18 +08:00
|
|
|
|
2020-05-27 00:11:01 +08:00
|
|
|
#else /* !CONFIG_SMP: */
|
|
|
|
static inline void flush_smp_call_function_from_idle(void) { }
|
|
|
|
#endif
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2011-11-16 00:14:39 +08:00
|
|
|
#include "stats.h"
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2021-10-19 04:34:28 +08:00
|
|
|
#if defined(CONFIG_SCHED_CORE) && defined(CONFIG_SCHEDSTATS)
|
|
|
|
|
|
|
|
extern void __sched_core_account_forceidle(struct rq *rq);
|
|
|
|
|
|
|
|
static inline void sched_core_account_forceidle(struct rq *rq)
|
|
|
|
{
|
|
|
|
if (schedstat_enabled())
|
|
|
|
__sched_core_account_forceidle(rq);
|
|
|
|
}
|
|
|
|
|
|
|
|
extern void __sched_core_tick(struct rq *rq);
|
|
|
|
|
|
|
|
static inline void sched_core_tick(struct rq *rq)
|
|
|
|
{
|
|
|
|
if (sched_core_enabled(rq) && schedstat_enabled())
|
|
|
|
__sched_core_tick(rq);
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
static inline void sched_core_account_forceidle(struct rq *rq) {}
|
|
|
|
|
|
|
|
static inline void sched_core_tick(struct rq *rq) {}
|
|
|
|
|
|
|
|
#endif /* CONFIG_SCHED_CORE && CONFIG_SCHEDSTATS */
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_CGROUP_SCHED
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Return the group to which this tasks belongs.
|
|
|
|
*
|
2013-08-09 08:11:22 +08:00
|
|
|
* We cannot use task_css() and friends because the cgroup subsystem
|
|
|
|
* changes that value before the cgroup_subsys::attach() method is called,
|
|
|
|
* therefore we cannot pin it and might observe the wrong value.
|
2012-06-22 19:36:05 +08:00
|
|
|
*
|
|
|
|
* The same is true for autogroup's p->signal->autogroup->tg, the autogroup
|
|
|
|
* core changes this before calling sched_move_task().
|
|
|
|
*
|
|
|
|
* Instead we use a 'copy' which is updated from sched_move_task() while
|
|
|
|
* holding both task_struct::pi_lock and rq::lock.
|
2011-10-25 16:00:11 +08:00
|
|
|
*/
|
|
|
|
static inline struct task_group *task_group(struct task_struct *p)
|
|
|
|
{
|
2012-06-22 19:36:05 +08:00
|
|
|
return p->sched_task_group;
|
2011-10-25 16:00:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
|
|
|
|
static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
|
|
|
|
{
|
|
|
|
#if defined(CONFIG_FAIR_GROUP_SCHED) || defined(CONFIG_RT_GROUP_SCHED)
|
|
|
|
struct task_group *tg = task_group(p);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
2015-10-24 00:16:19 +08:00
|
|
|
set_task_rq_fair(&p->se, p->se.cfs_rq, tg->cfs_rq[cpu]);
|
2011-10-25 16:00:11 +08:00
|
|
|
p->se.cfs_rq = tg->cfs_rq[cpu];
|
|
|
|
p->se.parent = tg->se[cpu];
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_RT_GROUP_SCHED
|
|
|
|
p->rt.rt_rq = tg->rt_rq[cpu];
|
|
|
|
p->rt.parent = tg->rt_se[cpu];
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
#else /* CONFIG_CGROUP_SCHED */
|
|
|
|
|
|
|
|
static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
|
|
|
|
static inline struct task_group *task_group(struct task_struct *p)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* CONFIG_CGROUP_SCHED */
|
|
|
|
|
|
|
|
static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu)
|
|
|
|
{
|
|
|
|
set_task_rq(p, cpu);
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
/*
|
|
|
|
* After ->cpu is set up to a new value, task_rq_lock(p, ...) can be
|
2018-12-03 17:05:56 +08:00
|
|
|
* successfully executed on another CPU. We must ensure that updates of
|
2011-10-25 16:00:11 +08:00
|
|
|
* per-task data have been completed by this moment.
|
|
|
|
*/
|
|
|
|
smp_wmb();
|
2019-01-21 23:52:40 +08:00
|
|
|
WRITE_ONCE(task_thread_info(p)->cpu, cpu);
|
2013-10-07 18:29:16 +08:00
|
|
|
p->wake_cpu = cpu;
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Tunables that become constants when CONFIG_SCHED_DEBUG is off:
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
# define const_debug __read_mostly
|
|
|
|
#else
|
|
|
|
# define const_debug const
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define SCHED_FEAT(name, enabled) \
|
|
|
|
__SCHED_FEAT_##name ,
|
|
|
|
|
|
|
|
enum {
|
2011-11-16 00:14:39 +08:00
|
|
|
#include "features.h"
|
2011-07-06 20:20:14 +08:00
|
|
|
__SCHED_FEAT_NR,
|
2011-10-25 16:00:11 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#undef SCHED_FEAT
|
|
|
|
|
2020-10-13 13:31:14 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds
When the kernel is compiled with !CONFIG_SCHED_DEBUG support, we expect that
all SCHED_FEAT are turned into compile time constants being propagated
to support compiler optimizations.
Specifically, we expect that code blocks like this:
if (sched_feat(FEATURE_NAME) [&& <other_conditions>]) {
/* FEATURE CODE */
}
are turned into dead-code in case FEATURE_NAME defaults to FALSE, and thus
being removed by the compiler from the finale image.
For this mechanism to properly work it's required for the compiler to
have full access, from each translation unit, to whatever is the value
defined by the sched_feat macro. This macro is defined as:
#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
and thus, the compiler can optimize that code only if the value of
sysctl_sched_features is visible within each translation unit.
Since:
029632fbb ("sched: Make separate sched*.c translation units")
the scheduler code has been split into separate translation units
however the definition of sysctl_sched_features is part of
kernel/sched/core.c while, for all the other scheduler modules, it is
visible only via kernel/sched/sched.h as an:
extern const_debug unsigned int sysctl_sched_features
Unfortunately, an extern reference does not allow the compiler to apply
constants propagation. Thus, on !CONFIG_SCHED_DEBUG kernel we still end up
with code to load a memory reference and (eventually) doing an unconditional
jump of a chunk of code.
This mechanism is unavoidable when sched_features can be turned on and off at
run-time. However, this is not the case for "production" kernels compiled with
!CONFIG_SCHED_DEBUG. In this case, sysctl_sched_features is just a constant value
which cannot be changed at run-time and thus memory loads and jumps can be
avoided altogether.
This patch fixes the case of !CONFIG_SCHED_DEBUG kernel by declaring a local version
of the sysctl_sched_features constant for each translation unit. This will
ultimately allow the compiler to perform constants propagation and dead-code
pruning.
Tests have been done, with !CONFIG_SCHED_DEBUG on a v4.14-rc8 with and without
the patch, by running 30 iterations of:
perf bench sched messaging --pipe --thread --group 4 --loop 50000
on a 40 cores Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz using the
powersave governor to rule out variations due to frequency scaling.
Statistics on the reported completion time:
count mean std min 99% max
v4.14-rc8 30.0 15.7831 0.176032 15.442 16.01226 16.014
v4.14-rc8+patch 30.0 15.5033 0.189681 15.232 15.93938 15.962
... show a 1.8% speedup on average completion time and 0.5% speedup in the
99 percentile.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20171108184101.16006-1-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-09 02:41:01 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* To support run-time toggling of sched features, all the translation units
|
|
|
|
* (but core.c) reference the sysctl_sched_features defined in core.c.
|
|
|
|
*/
|
|
|
|
extern const_debug unsigned int sysctl_sched_features;
|
|
|
|
|
2020-10-13 13:31:14 +08:00
|
|
|
#ifdef CONFIG_JUMP_LABEL
|
2011-07-06 20:20:14 +08:00
|
|
|
#define SCHED_FEAT(name, enabled) \
|
2012-02-24 15:31:31 +08:00
|
|
|
static __always_inline bool static_branch_##name(struct static_key *key) \
|
2011-07-06 20:20:14 +08:00
|
|
|
{ \
|
2014-07-02 23:52:41 +08:00
|
|
|
return static_key_##enabled(key); \
|
2011-07-06 20:20:14 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
#include "features.h"
|
|
|
|
#undef SCHED_FEAT
|
|
|
|
|
2012-02-24 15:31:31 +08:00
|
|
|
extern struct static_key sched_feat_keys[__SCHED_FEAT_NR];
|
2011-07-06 20:20:14 +08:00
|
|
|
#define sched_feat(x) (static_branch_##x(&sched_feat_keys[__SCHED_FEAT_##x]))
|
sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds
When the kernel is compiled with !CONFIG_SCHED_DEBUG support, we expect that
all SCHED_FEAT are turned into compile time constants being propagated
to support compiler optimizations.
Specifically, we expect that code blocks like this:
if (sched_feat(FEATURE_NAME) [&& <other_conditions>]) {
/* FEATURE CODE */
}
are turned into dead-code in case FEATURE_NAME defaults to FALSE, and thus
being removed by the compiler from the finale image.
For this mechanism to properly work it's required for the compiler to
have full access, from each translation unit, to whatever is the value
defined by the sched_feat macro. This macro is defined as:
#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
and thus, the compiler can optimize that code only if the value of
sysctl_sched_features is visible within each translation unit.
Since:
029632fbb ("sched: Make separate sched*.c translation units")
the scheduler code has been split into separate translation units
however the definition of sysctl_sched_features is part of
kernel/sched/core.c while, for all the other scheduler modules, it is
visible only via kernel/sched/sched.h as an:
extern const_debug unsigned int sysctl_sched_features
Unfortunately, an extern reference does not allow the compiler to apply
constants propagation. Thus, on !CONFIG_SCHED_DEBUG kernel we still end up
with code to load a memory reference and (eventually) doing an unconditional
jump of a chunk of code.
This mechanism is unavoidable when sched_features can be turned on and off at
run-time. However, this is not the case for "production" kernels compiled with
!CONFIG_SCHED_DEBUG. In this case, sysctl_sched_features is just a constant value
which cannot be changed at run-time and thus memory loads and jumps can be
avoided altogether.
This patch fixes the case of !CONFIG_SCHED_DEBUG kernel by declaring a local version
of the sysctl_sched_features constant for each translation unit. This will
ultimately allow the compiler to perform constants propagation and dead-code
pruning.
Tests have been done, with !CONFIG_SCHED_DEBUG on a v4.14-rc8 with and without
the patch, by running 30 iterations of:
perf bench sched messaging --pipe --thread --group 4 --loop 50000
on a 40 cores Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz using the
powersave governor to rule out variations due to frequency scaling.
Statistics on the reported completion time:
count mean std min 99% max
v4.14-rc8 30.0 15.7831 0.176032 15.442 16.01226 16.014
v4.14-rc8+patch 30.0 15.5033 0.189681 15.232 15.93938 15.962
... show a 1.8% speedup on average completion time and 0.5% speedup in the
99 percentile.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20171108184101.16006-1-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-09 02:41:01 +08:00
|
|
|
|
2020-10-13 13:31:14 +08:00
|
|
|
#else /* !CONFIG_JUMP_LABEL */
|
|
|
|
|
|
|
|
#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
|
|
|
|
|
|
|
|
#endif /* CONFIG_JUMP_LABEL */
|
|
|
|
|
|
|
|
#else /* !SCHED_DEBUG */
|
sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds
When the kernel is compiled with !CONFIG_SCHED_DEBUG support, we expect that
all SCHED_FEAT are turned into compile time constants being propagated
to support compiler optimizations.
Specifically, we expect that code blocks like this:
if (sched_feat(FEATURE_NAME) [&& <other_conditions>]) {
/* FEATURE CODE */
}
are turned into dead-code in case FEATURE_NAME defaults to FALSE, and thus
being removed by the compiler from the finale image.
For this mechanism to properly work it's required for the compiler to
have full access, from each translation unit, to whatever is the value
defined by the sched_feat macro. This macro is defined as:
#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
and thus, the compiler can optimize that code only if the value of
sysctl_sched_features is visible within each translation unit.
Since:
029632fbb ("sched: Make separate sched*.c translation units")
the scheduler code has been split into separate translation units
however the definition of sysctl_sched_features is part of
kernel/sched/core.c while, for all the other scheduler modules, it is
visible only via kernel/sched/sched.h as an:
extern const_debug unsigned int sysctl_sched_features
Unfortunately, an extern reference does not allow the compiler to apply
constants propagation. Thus, on !CONFIG_SCHED_DEBUG kernel we still end up
with code to load a memory reference and (eventually) doing an unconditional
jump of a chunk of code.
This mechanism is unavoidable when sched_features can be turned on and off at
run-time. However, this is not the case for "production" kernels compiled with
!CONFIG_SCHED_DEBUG. In this case, sysctl_sched_features is just a constant value
which cannot be changed at run-time and thus memory loads and jumps can be
avoided altogether.
This patch fixes the case of !CONFIG_SCHED_DEBUG kernel by declaring a local version
of the sysctl_sched_features constant for each translation unit. This will
ultimately allow the compiler to perform constants propagation and dead-code
pruning.
Tests have been done, with !CONFIG_SCHED_DEBUG on a v4.14-rc8 with and without
the patch, by running 30 iterations of:
perf bench sched messaging --pipe --thread --group 4 --loop 50000
on a 40 cores Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz using the
powersave governor to rule out variations due to frequency scaling.
Statistics on the reported completion time:
count mean std min 99% max
v4.14-rc8 30.0 15.7831 0.176032 15.442 16.01226 16.014
v4.14-rc8+patch 30.0 15.5033 0.189681 15.232 15.93938 15.962
... show a 1.8% speedup on average completion time and 0.5% speedup in the
99 percentile.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20171108184101.16006-1-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-09 02:41:01 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Each translation unit has its own copy of sysctl_sched_features to allow
|
|
|
|
* constants propagation at compile time and compiler optimization based on
|
|
|
|
* features default.
|
|
|
|
*/
|
|
|
|
#define SCHED_FEAT(name, enabled) \
|
|
|
|
(1UL << __SCHED_FEAT_##name) * enabled |
|
|
|
|
static const_debug __maybe_unused unsigned int sysctl_sched_features =
|
|
|
|
#include "features.h"
|
|
|
|
0;
|
|
|
|
#undef SCHED_FEAT
|
|
|
|
|
2018-08-29 17:45:21 +08:00
|
|
|
#define sched_feat(x) !!(sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
|
sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds
When the kernel is compiled with !CONFIG_SCHED_DEBUG support, we expect that
all SCHED_FEAT are turned into compile time constants being propagated
to support compiler optimizations.
Specifically, we expect that code blocks like this:
if (sched_feat(FEATURE_NAME) [&& <other_conditions>]) {
/* FEATURE CODE */
}
are turned into dead-code in case FEATURE_NAME defaults to FALSE, and thus
being removed by the compiler from the finale image.
For this mechanism to properly work it's required for the compiler to
have full access, from each translation unit, to whatever is the value
defined by the sched_feat macro. This macro is defined as:
#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
and thus, the compiler can optimize that code only if the value of
sysctl_sched_features is visible within each translation unit.
Since:
029632fbb ("sched: Make separate sched*.c translation units")
the scheduler code has been split into separate translation units
however the definition of sysctl_sched_features is part of
kernel/sched/core.c while, for all the other scheduler modules, it is
visible only via kernel/sched/sched.h as an:
extern const_debug unsigned int sysctl_sched_features
Unfortunately, an extern reference does not allow the compiler to apply
constants propagation. Thus, on !CONFIG_SCHED_DEBUG kernel we still end up
with code to load a memory reference and (eventually) doing an unconditional
jump of a chunk of code.
This mechanism is unavoidable when sched_features can be turned on and off at
run-time. However, this is not the case for "production" kernels compiled with
!CONFIG_SCHED_DEBUG. In this case, sysctl_sched_features is just a constant value
which cannot be changed at run-time and thus memory loads and jumps can be
avoided altogether.
This patch fixes the case of !CONFIG_SCHED_DEBUG kernel by declaring a local version
of the sysctl_sched_features constant for each translation unit. This will
ultimately allow the compiler to perform constants propagation and dead-code
pruning.
Tests have been done, with !CONFIG_SCHED_DEBUG on a v4.14-rc8 with and without
the patch, by running 30 iterations of:
perf bench sched messaging --pipe --thread --group 4 --loop 50000
on a 40 cores Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz using the
powersave governor to rule out variations due to frequency scaling.
Statistics on the reported completion time:
count mean std min 99% max
v4.14-rc8 30.0 15.7831 0.176032 15.442 16.01226 16.014
v4.14-rc8+patch 30.0 15.5033 0.189681 15.232 15.93938 15.962
... show a 1.8% speedup on average completion time and 0.5% speedup in the
99 percentile.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20171108184101.16006-1-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-09 02:41:01 +08:00
|
|
|
|
2020-10-13 13:31:14 +08:00
|
|
|
#endif /* SCHED_DEBUG */
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2015-08-12 00:24:21 +08:00
|
|
|
extern struct static_key_false sched_numa_balancing;
|
2016-02-05 17:08:36 +08:00
|
|
|
extern struct static_key_false sched_schedstats;
|
2012-10-25 20:16:43 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
static inline u64 global_rt_period(void)
|
|
|
|
{
|
|
|
|
return (u64)sysctl_sched_rt_period * NSEC_PER_USEC;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u64 global_rt_runtime(void)
|
|
|
|
{
|
|
|
|
if (sysctl_sched_rt_runtime < 0)
|
|
|
|
return RUNTIME_INF;
|
|
|
|
|
|
|
|
return (u64)sysctl_sched_rt_runtime * NSEC_PER_USEC;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int task_current(struct rq *rq, struct task_struct *p)
|
|
|
|
{
|
|
|
|
return rq->curr == p;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int task_running(struct rq *rq, struct task_struct *p)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
return p->on_cpu;
|
|
|
|
#else
|
|
|
|
return task_current(rq, p);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
2014-08-20 17:47:32 +08:00
|
|
|
static inline int task_on_rq_queued(struct task_struct *p)
|
|
|
|
{
|
|
|
|
return p->on_rq == TASK_ON_RQ_QUEUED;
|
|
|
|
}
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Teach scheduler to understand TASK_ON_RQ_MIGRATING state
This is a new p->on_rq state which will be used to indicate that a task
is in a process of migrating between two RQs. It allows to get
rid of double_rq_lock(), which we used to use to change a rq of
a queued task before.
Let's consider an example. To move a task between src_rq and
dst_rq we will do the following:
raw_spin_lock(&src_rq->lock);
/* p is a task which is queued on src_rq */
p = ...;
dequeue_task(src_rq, p, 0);
p->on_rq = TASK_ON_RQ_MIGRATING;
set_task_cpu(p, dst_cpu);
raw_spin_unlock(&src_rq->lock);
/*
* Both RQs are unlocked here.
* Task p is dequeued from src_rq
* but its on_rq value is not zero.
*/
raw_spin_lock(&dst_rq->lock);
p->on_rq = TASK_ON_RQ_QUEUED;
enqueue_task(dst_rq, p, 0);
raw_spin_unlock(&dst_rq->lock);
While p->on_rq is TASK_ON_RQ_MIGRATING, task is considered as
"migrating", and other parallel scheduler actions with it are
not available to parallel callers. The parallel caller is
spining till migration is completed.
The unavailable actions are changing of cpu affinity, changing
of priority etc, in other words all the functionality which used
to require task_rq(p)->lock before (and related to the task).
To implement TASK_ON_RQ_MIGRATING support we primarily are using
the following fact. Most of scheduler users (from which we are
protecting a migrating task) use task_rq_lock() and
__task_rq_lock() to get the lock of task_rq(p). These primitives
know that task's cpu may change, and they are spining while the
lock of the right RQ is not held. We add one more condition into
them, so they will be also spinning until the migration is
finished.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1408528062.23412.88.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-20 17:47:42 +08:00
|
|
|
static inline int task_on_rq_migrating(struct task_struct *p)
|
|
|
|
{
|
2019-01-21 23:52:40 +08:00
|
|
|
return READ_ONCE(p->on_rq) == TASK_ON_RQ_MIGRATING;
|
sched: Teach scheduler to understand TASK_ON_RQ_MIGRATING state
This is a new p->on_rq state which will be used to indicate that a task
is in a process of migrating between two RQs. It allows to get
rid of double_rq_lock(), which we used to use to change a rq of
a queued task before.
Let's consider an example. To move a task between src_rq and
dst_rq we will do the following:
raw_spin_lock(&src_rq->lock);
/* p is a task which is queued on src_rq */
p = ...;
dequeue_task(src_rq, p, 0);
p->on_rq = TASK_ON_RQ_MIGRATING;
set_task_cpu(p, dst_cpu);
raw_spin_unlock(&src_rq->lock);
/*
* Both RQs are unlocked here.
* Task p is dequeued from src_rq
* but its on_rq value is not zero.
*/
raw_spin_lock(&dst_rq->lock);
p->on_rq = TASK_ON_RQ_QUEUED;
enqueue_task(dst_rq, p, 0);
raw_spin_unlock(&dst_rq->lock);
While p->on_rq is TASK_ON_RQ_MIGRATING, task is considered as
"migrating", and other parallel scheduler actions with it are
not available to parallel callers. The parallel caller is
spining till migration is completed.
The unavailable actions are changing of cpu affinity, changing
of priority etc, in other words all the functionality which used
to require task_rq(p)->lock before (and related to the task).
To implement TASK_ON_RQ_MIGRATING support we primarily are using
the following fact. Most of scheduler users (from which we are
protecting a migrating task) use task_rq_lock() and
__task_rq_lock() to get the lock of task_rq(p). These primitives
know that task's cpu may change, and they are spining while the
lock of the right RQ is not held. We add one more condition into
them, so they will be also spinning until the migration is
finished.
Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1408528062.23412.88.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-20 17:47:42 +08:00
|
|
|
}
|
|
|
|
|
2020-11-03 02:45:12 +08:00
|
|
|
/* Wake flags. The first three directly map to some SD flag value */
|
|
|
|
#define WF_EXEC 0x02 /* Wakeup after exec; maps to SD_BALANCE_EXEC */
|
|
|
|
#define WF_FORK 0x04 /* Wakeup after fork; maps to SD_BALANCE_FORK */
|
|
|
|
#define WF_TTWU 0x08 /* Wakeup; maps to SD_BALANCE_WAKE */
|
|
|
|
|
|
|
|
#define WF_SYNC 0x10 /* Waker goes to sleep after wakeup */
|
|
|
|
#define WF_MIGRATED 0x20 /* Internal use, task got migrated */
|
|
|
|
#define WF_ON_CPU 0x40 /* Wakee is on_cpu */
|
|
|
|
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
static_assert(WF_EXEC == SD_BALANCE_EXEC);
|
|
|
|
static_assert(WF_FORK == SD_BALANCE_FORK);
|
|
|
|
static_assert(WF_TTWU == SD_BALANCE_WAKE);
|
|
|
|
#endif
|
2013-03-05 16:06:38 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
/*
|
|
|
|
* To aid in avoiding the subversion of "niceness" due to uneven distribution
|
|
|
|
* of tasks with abnormal "nice" values across CPUs the contribution that
|
|
|
|
* each task makes to its run queue's load is weighted according to its
|
|
|
|
* scheduling class and "nice" value. For SCHED_NORMAL tasks this is just a
|
|
|
|
* scaled version of the new time slice allocation that they receive on time
|
|
|
|
* slice expiry etc.
|
|
|
|
*/
|
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
#define WEIGHT_IDLEPRIO 3
|
|
|
|
#define WMULT_IDLEPRIO 1431655765
|
2011-10-25 16:00:11 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
extern const int sched_prio_to_weight[40];
|
|
|
|
extern const u32 sched_prio_to_wmult[40];
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2016-01-18 22:27:07 +08:00
|
|
|
/*
|
|
|
|
* {de,en}queue flags:
|
|
|
|
*
|
|
|
|
* DEQUEUE_SLEEP - task is no longer runnable
|
|
|
|
* ENQUEUE_WAKEUP - task just became runnable
|
|
|
|
*
|
|
|
|
* SAVE/RESTORE - an otherwise spurious dequeue/enqueue, done to ensure tasks
|
|
|
|
* are in a known state which allows modification. Such pairs
|
|
|
|
* should preserve as much state as possible.
|
|
|
|
*
|
|
|
|
* MOVE - paired with SAVE/RESTORE, explicitly does not preserve the location
|
|
|
|
* in the runqueue.
|
|
|
|
*
|
|
|
|
* ENQUEUE_HEAD - place at front of runqueue (tail if not specified)
|
|
|
|
* ENQUEUE_REPLENISH - CBS (replenish runtime and postpone deadline)
|
2016-05-11 00:24:37 +08:00
|
|
|
* ENQUEUE_MIGRATED - the task was migrated during wakeup
|
2016-01-18 22:27:07 +08:00
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define DEQUEUE_SLEEP 0x01
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
#define DEQUEUE_SAVE 0x02 /* Matches ENQUEUE_RESTORE */
|
|
|
|
#define DEQUEUE_MOVE 0x04 /* Matches ENQUEUE_MOVE */
|
|
|
|
#define DEQUEUE_NOCLOCK 0x08 /* Matches ENQUEUE_NOCLOCK */
|
2016-01-18 22:27:07 +08:00
|
|
|
|
sched/core: Fix task and run queue sched_info::run_delay inconsistencies
Mike Meyer reported the following bug:
> During evaluation of some performance data, it was discovered thread
> and run queue run_delay accounting data was inconsistent with the other
> accounting data that was collected. Further investigation found under
> certain circumstances execution time was leaking into the task and
> run queue accounting of run_delay.
>
> Consider the following sequence:
>
> a. thread is running.
> b. thread moves beween cgroups, changes scheduling class or priority.
> c. thread sleeps OR
> d. thread involuntarily gives up cpu.
>
> a. implies:
>
> thread->sched_info.last_queued = 0
>
> a. and b. results in the following:
>
> 1. dequeue_task(rq, thread)
>
> sched_info_dequeued(rq, thread)
> delta = 0
>
> sched_info_reset_dequeued(thread)
> thread->sched_info.last_queued = 0
>
> thread->sched_info.run_delay += delta
>
> 2. enqueue_task(rq, thread)
>
> sched_info_queued(rq, thread)
>
> /* thread is still on cpu at this point. */
> thread->sched_info.last_queued = task_rq(thread)->clock;
>
> c. results in:
>
> dequeue_task(rq, thread)
>
> sched_info_dequeued(rq, thread)
>
> /* delta is execution time not run_delay. */
> delta = task_rq(thread)->clock - thread->sched_info.last_queued
>
> sched_info_reset_dequeued(thread)
> thread->sched_info.last_queued = 0
>
> thread->sched_info.run_delay += delta
>
> Since thread was running between enqueue_task(rq, thread) and
> dequeue_task(rq, thread), the delta above is really execution
> time and not run_delay.
>
> d. results in:
>
> __sched_info_switch(thread, next_thread)
>
> sched_info_depart(rq, thread)
>
> sched_info_queued(rq, thread)
>
> /* last_queued not updated due to being non-zero */
> return
>
> Since thread was running between enqueue_task(rq, thread) and
> __sched_info_switch(thread, next_thread), the execution time
> between enqueue_task(rq, thread) and
> __sched_info_switch(thread, next_thread) now will become
> associated with run_delay due to when last_queued was last updated.
>
This alternative patch solves the problem by not calling
sched_info_{de,}queued() in {de,en}queue_task(). Therefore the
sched_info state is preserved and things work as expected.
By inlining the {de,en}queue_task() functions the new condition
becomes (mostly) a compile-time constant and we'll not emit any new
branch instructions.
It even shrinks the code (due to inlining {en,de}queue_task()):
$ size defconfig-build/kernel/sched/core.o defconfig-build/kernel/sched/core.o.orig
text data bss dec hex filename
64019 23378 2344 89741 15e8d defconfig-build/kernel/sched/core.o
64149 23378 2344 89871 15f0f defconfig-build/kernel/sched/core.o.orig
Reported-by: Mike Meyer <Mike.Meyer@Teradata.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150930154413.GO3604@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-30 23:44:13 +08:00
|
|
|
#define ENQUEUE_WAKEUP 0x01
|
2016-01-18 22:27:07 +08:00
|
|
|
#define ENQUEUE_RESTORE 0x02
|
|
|
|
#define ENQUEUE_MOVE 0x04
|
2016-10-04 22:29:45 +08:00
|
|
|
#define ENQUEUE_NOCLOCK 0x08
|
2016-01-18 22:27:07 +08:00
|
|
|
|
2016-10-04 22:29:45 +08:00
|
|
|
#define ENQUEUE_HEAD 0x10
|
|
|
|
#define ENQUEUE_REPLENISH 0x20
|
2013-03-05 16:06:55 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2016-10-04 22:29:45 +08:00
|
|
|
#define ENQUEUE_MIGRATED 0x40
|
2013-03-05 16:06:55 +08:00
|
|
|
#else
|
2016-05-11 00:24:37 +08:00
|
|
|
#define ENQUEUE_MIGRATED 0x00
|
2013-03-05 16:06:55 +08:00
|
|
|
#endif
|
|
|
|
|
2014-02-14 19:25:08 +08:00
|
|
|
#define RETRY_TASK ((void *)-1UL)
|
|
|
|
|
2013-03-05 16:06:55 +08:00
|
|
|
struct sched_class {
|
|
|
|
|
2019-06-21 16:42:02 +08:00
|
|
|
#ifdef CONFIG_UCLAMP_TASK
|
|
|
|
int uclamp_enabled;
|
|
|
|
#endif
|
|
|
|
|
2013-03-05 16:06:55 +08:00
|
|
|
void (*enqueue_task) (struct rq *rq, struct task_struct *p, int flags);
|
|
|
|
void (*dequeue_task) (struct rq *rq, struct task_struct *p, int flags);
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
void (*yield_task) (struct rq *rq);
|
2020-06-03 16:03:02 +08:00
|
|
|
bool (*yield_to_task)(struct rq *rq, struct task_struct *p);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
void (*check_preempt_curr)(struct rq *rq, struct task_struct *p, int flags);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
2019-11-08 21:15:58 +08:00
|
|
|
struct task_struct *(*pick_next_task)(struct rq *rq);
|
|
|
|
|
2019-11-08 18:11:52 +08:00
|
|
|
void (*put_prev_task)(struct rq *rq, struct task_struct *p);
|
2019-11-08 21:16:00 +08:00
|
|
|
void (*set_next_task)(struct rq *rq, struct task_struct *p, bool first);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SMP
|
2019-11-08 18:11:52 +08:00
|
|
|
int (*balance)(struct rq *rq, struct task_struct *prev, struct rq_flags *rf);
|
2020-11-03 02:45:13 +08:00
|
|
|
int (*select_task_rq)(struct task_struct *p, int task_cpu, int flags);
|
2020-11-18 07:19:32 +08:00
|
|
|
|
|
|
|
struct task_struct * (*pick_task)(struct rq *rq);
|
|
|
|
|
sched/numa: Pass destination CPU as a parameter to migrate_task_rq
This additional parameter (new_cpu) is used later for identifying if
task migration is across nodes.
No functional change.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 203353 200668 -1.32036
1 328205 321791 -1.95427
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 214384 204848 -4.44809
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 188553 188098 -0.241311
1 196273 200351 2.07772
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 57581.2 58145.9 0.980702
1 103468 103798 0.318939
Brings out the variance between different specjbb2005 runs.
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,941,377 13,912,183
migrations 1,157,323 1,155,931
faults 382,175 367,139
cache-misses 54,993,823,500 54,240,196,814
sched:sched_move_numa 2,005 1,571
sched:sched_stick_numa 14 9
sched:sched_swap_numa 529 463
migrate:mm_migrate_pages 1,573 703
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 67099 50155
numa_hint_faults_local 58456 45264
numa_hit 240416 239652
numa_huge_pte_updates 18 36
numa_interleave 65 68
numa_local 240339 239576
numa_other 77 76
numa_pages_migrated 1574 680
numa_pte_updates 77182 71146
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,176,453 3,156,720
migrations 30,238 30,354
faults 87,869 97,261
cache-misses 12,544,479,391 12,400,026,826
sched:sched_move_numa 23 4
sched:sched_stick_numa 0 0
sched:sched_swap_numa 6 1
migrate:mm_migrate_pages 10 20
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 236 272
numa_hint_faults_local 201 186
numa_hit 72293 71362
numa_huge_pte_updates 0 0
numa_interleave 26 23
numa_local 72233 71299
numa_other 60 63
numa_pages_migrated 8 2
numa_pte_updates 0 0
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,478,820 8,606,824
migrations 171,323 155,352
faults 307,499 301,409
cache-misses 240,353,599 157,759,224
sched:sched_move_numa 214 168
sched:sched_stick_numa 0 0
sched:sched_swap_numa 4 3
migrate:mm_migrate_pages 89 125
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 5301 4650
numa_hint_faults_local 4745 3946
numa_hit 92943 90489
numa_huge_pte_updates 0 0
numa_interleave 899 892
numa_local 92345 90034
numa_other 598 455
numa_pages_migrated 88 124
numa_pte_updates 5505 4818
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,066,172 2,113,167
migrations 11,076 10,533
faults 149,544 142,727
cache-misses 10,398,067 5,594,192
sched:sched_move_numa 43 10
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 6 6
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 3552 744
numa_hint_faults_local 3347 584
numa_hit 25611 25551
numa_huge_pte_updates 0 0
numa_interleave 213 263
numa_local 25583 25302
numa_other 28 249
numa_pages_migrated 6 6
numa_pte_updates 3535 744
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 99,358,136 101,227,352
migrations 4,041,607 4,151,829
faults 749,653 745,233
cache-misses 225,562,543,251 224,669,561,766
sched:sched_move_numa 771 617
sched:sched_stick_numa 14 2
sched:sched_swap_numa 204 187
migrate:mm_migrate_pages 1,180 316
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 27409 24195
numa_hint_faults_local 20677 21639
numa_hit 239988 238331
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 239983 238331
numa_other 5 0
numa_pages_migrated 1016 204
numa_pte_updates 27916 24561
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 60,899,307 62,738,978
migrations 544,668 562,702
faults 270,834 228,465
cache-misses 74,543,455,635 75,778,067,952
sched:sched_move_numa 735 648
sched:sched_stick_numa 25 13
sched:sched_swap_numa 174 137
migrate:mm_migrate_pages 816 733
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 11059 10281
numa_hint_faults_local 4733 3242
numa_hit 41384 36338
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 41383 36338
numa_other 1 0
numa_pages_migrated 815 706
numa_pte_updates 11323 10176
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-3-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-22 01:48:57 +08:00
|
|
|
void (*migrate_task_rq)(struct task_struct *p, int new_cpu);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
void (*task_woken)(struct rq *this_rq, struct task_struct *task);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
|
|
|
void (*set_cpus_allowed)(struct task_struct *p,
|
2020-09-16 20:59:08 +08:00
|
|
|
const struct cpumask *newmask,
|
|
|
|
u32 flags);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
|
|
|
void (*rq_online)(struct rq *rq);
|
|
|
|
void (*rq_offline)(struct rq *rq);
|
2020-09-28 23:06:07 +08:00
|
|
|
|
|
|
|
struct rq *(*find_lock_rq)(struct task_struct *p, struct rq *rq);
|
2013-03-05 16:06:55 +08:00
|
|
|
#endif
|
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
void (*task_tick)(struct rq *rq, struct task_struct *p, int queued);
|
|
|
|
void (*task_fork)(struct task_struct *p);
|
|
|
|
void (*task_dead)(struct task_struct *p);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
2014-10-27 22:40:52 +08:00
|
|
|
/*
|
|
|
|
* The switched_from() call is allowed to drop rq->lock, therefore we
|
2021-03-18 20:38:50 +08:00
|
|
|
* cannot assume the switched_from/switched_to pair is serialized by
|
2014-10-27 22:40:52 +08:00
|
|
|
* rq->lock. They are however serialized by p->pi_lock.
|
|
|
|
*/
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
void (*switched_from)(struct rq *this_rq, struct task_struct *task);
|
|
|
|
void (*switched_to) (struct rq *this_rq, struct task_struct *task);
|
2013-03-05 16:06:55 +08:00
|
|
|
void (*prio_changed) (struct rq *this_rq, struct task_struct *task,
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
int oldprio);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
unsigned int (*get_rr_interval)(struct rq *rq,
|
|
|
|
struct task_struct *task);
|
2013-03-05 16:06:55 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
void (*update_curr)(struct rq *rq);
|
sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency
Commit d670ec13178d0 "posix-cpu-timers: Cure SMP wobbles" fixes one glibc
test case in cost of breaking another one. After that commit, calling
clock_nanosleep(TIMER_ABSTIME, X) and then clock_gettime(&Y) can result
of Y time being smaller than X time.
Reproducer/tester can be found further below, it can be compiled and ran by:
gcc -o tst-cpuclock2 tst-cpuclock2.c -pthread
while ./tst-cpuclock2 ; do : ; done
This reproducer, when running on a buggy kernel, will complain
about "clock_gettime difference too small".
Issue happens because on start in thread_group_cputimer() we initialize
sum_exec_runtime of cputimer with threads runtime not yet accounted and
then add the threads runtime to running cputimer again on scheduler
tick, making it's sum_exec_runtime bigger than actual threads runtime.
KOSAKI Motohiro posted a fix for this problem, but that patch was never
applied: https://lkml.org/lkml/2013/5/26/191 .
This patch takes different approach to cure the problem. It calls
update_curr() when cputimer starts, that assure we will have updated
stats of running threads and on the next schedule tick we will account
only the runtime that elapsed from cputimer start. That also assure we
have consistent state between cpu times of individual threads and cpu
time of the process consisted by those threads.
Full reproducer (tst-cpuclock2.c):
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <stdio.h>
#include <time.h>
#include <pthread.h>
#include <stdint.h>
#include <inttypes.h>
/* Parameters for the Linux kernel ABI for CPU clocks. */
#define CPUCLOCK_SCHED 2
#define MAKE_PROCESS_CPUCLOCK(pid, clock) \
((~(clockid_t) (pid) << 3) | (clockid_t) (clock))
static pthread_barrier_t barrier;
/* Help advance the clock. */
static void *chew_cpu(void *arg)
{
pthread_barrier_wait(&barrier);
while (1) ;
return NULL;
}
/* Don't use the glibc wrapper. */
static int do_nanosleep(int flags, const struct timespec *req)
{
clockid_t clock_id = MAKE_PROCESS_CPUCLOCK(0, CPUCLOCK_SCHED);
return syscall(SYS_clock_nanosleep, clock_id, flags, req, NULL);
}
static int64_t tsdiff(const struct timespec *before, const struct timespec *after)
{
int64_t before_i = before->tv_sec * 1000000000ULL + before->tv_nsec;
int64_t after_i = after->tv_sec * 1000000000ULL + after->tv_nsec;
return after_i - before_i;
}
int main(void)
{
int result = 0;
pthread_t th;
pthread_barrier_init(&barrier, NULL, 2);
if (pthread_create(&th, NULL, chew_cpu, NULL) != 0) {
perror("pthread_create");
return 1;
}
pthread_barrier_wait(&barrier);
/* The test. */
struct timespec before, after, sleeptimeabs;
int64_t sleepdiff, diffabs;
const struct timespec sleeptime = {.tv_sec = 0,.tv_nsec = 100000000 };
/* The relative nanosleep. Not sure why this is needed, but its presence
seems to make it easier to reproduce the problem. */
if (do_nanosleep(0, &sleeptime) != 0) {
perror("clock_nanosleep");
return 1;
}
/* Get the current time. */
if (clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &before) < 0) {
perror("clock_gettime[2]");
return 1;
}
/* Compute the absolute sleep time based on the current time. */
uint64_t nsec = before.tv_nsec + sleeptime.tv_nsec;
sleeptimeabs.tv_sec = before.tv_sec + nsec / 1000000000;
sleeptimeabs.tv_nsec = nsec % 1000000000;
/* Sleep for the computed time. */
if (do_nanosleep(TIMER_ABSTIME, &sleeptimeabs) != 0) {
perror("absolute clock_nanosleep");
return 1;
}
/* Get the time after the sleep. */
if (clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &after) < 0) {
perror("clock_gettime[3]");
return 1;
}
/* The time after sleep should always be equal to or after the absolute sleep
time passed to clock_nanosleep. */
sleepdiff = tsdiff(&sleeptimeabs, &after);
if (sleepdiff < 0) {
printf("absolute clock_nanosleep woke too early: %" PRId64 "\n", sleepdiff);
result = 1;
printf("Before %llu.%09llu\n", before.tv_sec, before.tv_nsec);
printf("After %llu.%09llu\n", after.tv_sec, after.tv_nsec);
printf("Sleep %llu.%09llu\n", sleeptimeabs.tv_sec, sleeptimeabs.tv_nsec);
}
/* The difference between the timestamps taken before and after the
clock_nanosleep call should be equal to or more than the duration of the
sleep. */
diffabs = tsdiff(&before, &after);
if (diffabs < sleeptime.tv_nsec) {
printf("clock_gettime difference too small: %" PRId64 "\n", diffabs);
result = 1;
}
pthread_cancel(th);
return result;
}
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141112155843.GA24803@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-12 23:58:44 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
#define TASK_SET_GROUP 0
|
|
|
|
#define TASK_MOVE_GROUP 1
|
2016-06-17 19:38:55 +08:00
|
|
|
|
2013-03-05 16:06:55 +08:00
|
|
|
#ifdef CONFIG_FAIR_GROUP_SCHED
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
void (*task_change_group)(struct task_struct *p, int type);
|
2013-03-05 16:06:55 +08:00
|
|
|
#endif
|
2020-10-21 21:45:33 +08:00
|
|
|
};
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2014-02-12 17:49:30 +08:00
|
|
|
static inline void put_prev_task(struct rq *rq, struct task_struct *prev)
|
|
|
|
{
|
2019-08-06 21:13:17 +08:00
|
|
|
WARN_ON_ONCE(rq->curr != prev);
|
2019-11-08 18:11:52 +08:00
|
|
|
prev->sched_class->put_prev_task(rq, prev);
|
2014-02-12 17:49:30 +08:00
|
|
|
}
|
|
|
|
|
2019-05-30 04:36:41 +08:00
|
|
|
static inline void set_next_task(struct rq *rq, struct task_struct *next)
|
2016-09-21 04:00:38 +08:00
|
|
|
{
|
2019-11-08 21:16:00 +08:00
|
|
|
next->sched_class->set_next_task(rq, next, false);
|
2016-09-21 04:00:38 +08:00
|
|
|
}
|
|
|
|
|
2020-10-21 21:45:33 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Helper to define a sched_class instance; each one is placed in a separate
|
|
|
|
* section which is ordered by the linker script:
|
|
|
|
*
|
|
|
|
* include/asm-generic/vmlinux.lds.h
|
|
|
|
*
|
|
|
|
* Also enforce alignment on the instance, not the type, to guarantee layout.
|
|
|
|
*/
|
|
|
|
#define DEFINE_SCHED_CLASS(name) \
|
|
|
|
const struct sched_class name##_sched_class \
|
|
|
|
__aligned(__alignof__(struct sched_class)) \
|
|
|
|
__section("__" #name "_sched_class")
|
|
|
|
|
2019-12-20 05:44:53 +08:00
|
|
|
/* Defined in include/asm-generic/vmlinux.lds.h */
|
|
|
|
extern struct sched_class __begin_sched_classes[];
|
|
|
|
extern struct sched_class __end_sched_classes[];
|
|
|
|
|
|
|
|
#define sched_class_highest (__end_sched_classes - 1)
|
|
|
|
#define sched_class_lowest (__begin_sched_classes - 1)
|
2019-11-08 18:11:52 +08:00
|
|
|
|
|
|
|
#define for_class_range(class, _from, _to) \
|
2019-12-20 05:44:53 +08:00
|
|
|
for (class = (_from); class != (_to); class--)
|
2019-11-08 18:11:52 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#define for_each_class(class) \
|
2019-12-20 05:44:53 +08:00
|
|
|
for_class_range(class, sched_class_highest, sched_class_lowest)
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
extern const struct sched_class stop_sched_class;
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
extern const struct sched_class dl_sched_class;
|
2011-10-25 16:00:11 +08:00
|
|
|
extern const struct sched_class rt_sched_class;
|
|
|
|
extern const struct sched_class fair_sched_class;
|
|
|
|
extern const struct sched_class idle_sched_class;
|
|
|
|
|
2019-11-08 18:11:52 +08:00
|
|
|
static inline bool sched_stop_runnable(struct rq *rq)
|
|
|
|
{
|
|
|
|
return rq->stop && task_on_rq_queued(rq->stop);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool sched_dl_runnable(struct rq *rq)
|
|
|
|
{
|
|
|
|
return rq->dl.dl_nr_running > 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool sched_rt_runnable(struct rq *rq)
|
|
|
|
{
|
|
|
|
return rq->rt.rt_queued > 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool sched_fair_runnable(struct rq *rq)
|
|
|
|
{
|
|
|
|
return rq->cfs.nr_running > 0;
|
|
|
|
}
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2019-11-08 21:15:57 +08:00
|
|
|
extern struct task_struct *pick_next_task_fair(struct rq *rq, struct task_struct *prev, struct rq_flags *rf);
|
2019-11-08 21:15:58 +08:00
|
|
|
extern struct task_struct *pick_next_task_idle(struct rq *rq);
|
2019-11-08 21:15:57 +08:00
|
|
|
|
2020-09-17 16:38:30 +08:00
|
|
|
#define SCA_CHECK 0x01
|
|
|
|
#define SCA_MIGRATE_DISABLE 0x02
|
|
|
|
#define SCA_MIGRATE_ENABLE 0x04
|
sched: Allow task CPU affinity to be restricted on asymmetric systems
Asymmetric systems may not offer the same level of userspace ISA support
across all CPUs, meaning that some applications cannot be executed by
some CPUs. As a concrete example, upcoming arm64 big.LITTLE designs do
not feature support for 32-bit applications on both clusters.
Although userspace can carefully manage the affinity masks for such
tasks, one place where it is particularly problematic is execve()
because the CPU on which the execve() is occurring may be incompatible
with the new application image. In such a situation, it is desirable to
restrict the affinity mask of the task and ensure that the new image is
entered on a compatible CPU. From userspace's point of view, this looks
the same as if the incompatible CPUs have been hotplugged off in the
task's affinity mask. Similarly, if a subsequent execve() reverts to
a compatible image, then the old affinity is restored if it is still
valid.
In preparation for restricting the affinity mask for compat tasks on
arm64 systems without uniform support for 32-bit applications, introduce
{force,relax}_compatible_cpus_allowed_ptr(), which respectively restrict
and restore the affinity mask for a task based on the compatible CPUs.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210730112443.23245-9-will@kernel.org
2021-07-30 19:24:35 +08:00
|
|
|
#define SCA_USER 0x08
|
2020-09-17 16:38:30 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
|
2014-05-27 06:19:37 +08:00
|
|
|
extern void update_group_capacity(struct sched_domain *sd, int cpu);
|
2013-03-07 10:00:26 +08:00
|
|
|
|
2014-01-06 19:34:38 +08:00
|
|
|
extern void trigger_load_balance(struct rq *rq);
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2020-09-16 20:59:08 +08:00
|
|
|
extern void set_cpus_allowed_common(struct task_struct *p, const struct cpumask *new_mask, u32 flags);
|
2015-05-15 23:43:35 +08:00
|
|
|
|
2020-09-28 23:06:07 +08:00
|
|
|
static inline struct task_struct *get_push_task(struct rq *rq)
|
|
|
|
{
|
|
|
|
struct task_struct *p = rq->curr;
|
|
|
|
|
2020-11-18 07:19:31 +08:00
|
|
|
lockdep_assert_rq_held(rq);
|
2020-09-28 23:06:07 +08:00
|
|
|
|
|
|
|
if (rq->push_busy)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
if (p->nr_cpus_allowed == 1)
|
|
|
|
return NULL;
|
|
|
|
|
2021-08-26 21:37:38 +08:00
|
|
|
if (p->migration_disabled)
|
|
|
|
return NULL;
|
|
|
|
|
2020-09-28 23:06:07 +08:00
|
|
|
rq->push_busy = true;
|
|
|
|
return get_task_struct(p);
|
|
|
|
}
|
|
|
|
|
|
|
|
extern int push_cpu_stop(void *arg);
|
2015-05-15 23:43:35 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif
|
|
|
|
|
2014-09-04 23:32:09 +08:00
|
|
|
#ifdef CONFIG_CPU_IDLE
|
|
|
|
static inline void idle_set_state(struct rq *rq,
|
|
|
|
struct cpuidle_state *idle_state)
|
|
|
|
{
|
|
|
|
rq->idle_state = idle_state;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct cpuidle_state *idle_get_state(struct rq *rq)
|
|
|
|
{
|
2016-09-21 04:34:51 +08:00
|
|
|
SCHED_WARN_ON(!rcu_read_lock_held());
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
|
2014-09-04 23:32:09 +08:00
|
|
|
return rq->idle_state;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void idle_set_state(struct rq *rq,
|
|
|
|
struct cpuidle_state *idle_state)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct cpuidle_state *idle_get_state(struct rq *rq)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
sched/core: Call __schedule() from do_idle() without enabling preemption
I finally got around to creating trampolines for dynamically allocated
ftrace_ops with using synchronize_rcu_tasks(). For users of the ftrace
function hook callbacks, like perf, that allocate the ftrace_ops
descriptor via kmalloc() and friends, ftrace was not able to optimize
the functions being traced to use a trampoline because they would also
need to be allocated dynamically. The problem is that they cannot be
freed when CONFIG_PREEMPT is set, as there's no way to tell if a task
was preempted on the trampoline. That was before Paul McKenney
implemented synchronize_rcu_tasks() that would make sure all tasks
(except idle) have scheduled out or have entered user space.
While testing this, I triggered this bug:
BUG: unable to handle kernel paging request at ffffffffa0230077
...
RIP: 0010:0xffffffffa0230077
...
Call Trace:
schedule+0x5/0xe0
schedule_preempt_disabled+0x18/0x30
do_idle+0x172/0x220
What happened was that the idle task was preempted on the trampoline.
As synchronize_rcu_tasks() ignores the idle thread, there's nothing
that lets ftrace know that the idle task was preempted on a trampoline.
The idle task shouldn't need to ever enable preemption. The idle task
is simply a loop that calls schedule or places the cpu into idle mode.
In fact, having preemption enabled is inefficient, because it can
happen when idle is just about to call schedule anyway, which would
cause schedule to be called twice. Once for when the interrupt came in
and was returning back to normal context, and then again in the normal
path that the idle loop is running in, which would be pointless, as it
had already scheduled.
The only reason schedule_preempt_disable() enables preemption is to be
able to call sched_submit_work(), which requires preemption enabled. As
this is a nop when the task is in the RUNNING state, and idle is always
in the running state, there's no reason that idle needs to enable
preemption. But that means it cannot use schedule_preempt_disable() as
other callers of that function require calling sched_submit_work().
Adding a new function local to kernel/sched/ that allows idle to call
the scheduler without enabling preemption, fixes the
synchronize_rcu_tasks() issue, as well as removes the pointless spurious
schedule calls caused by interrupts happening in the brief window where
preemption is enabled just before it calls schedule.
Reviewed: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170414084809.3dacde2a@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-14 20:48:09 +08:00
|
|
|
extern void schedule_idle(void);
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
extern void sysrq_sched_debug_show(void);
|
|
|
|
extern void sched_init_granularity(void);
|
|
|
|
extern void update_max_interval(void);
|
sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.
Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.
The very same approach used in sched_rt is utilised:
- -deadline tasks are kept into CPU-specific runqueues,
- -deadline tasks are migrated among runqueues to achieve the
following:
* on an M-CPU system the M earliest deadline ready tasks
are always running;
* affinity/cpusets settings of all the -deadline tasks is
always respected.
Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.
To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.
In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:38 +08:00
|
|
|
|
|
|
|
extern void init_sched_dl_class(void);
|
2011-10-25 16:00:11 +08:00
|
|
|
extern void init_sched_rt_class(void);
|
|
|
|
extern void init_sched_fair_class(void);
|
|
|
|
|
2017-05-17 17:50:45 +08:00
|
|
|
extern void reweight_task(struct task_struct *p, int prio);
|
|
|
|
|
2014-06-29 04:03:57 +08:00
|
|
|
extern void resched_curr(struct rq *rq);
|
2011-10-25 16:00:11 +08:00
|
|
|
extern void resched_cpu(int cpu);
|
|
|
|
|
|
|
|
extern struct rt_bandwidth def_rt_bandwidth;
|
|
|
|
extern void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime);
|
|
|
|
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
extern void init_dl_bandwidth(struct dl_bandwidth *dl_b, u64 period, u64 runtime);
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
extern void init_dl_task_timer(struct sched_dl_entity *dl_se);
|
2017-05-19 04:13:29 +08:00
|
|
|
extern void init_dl_inactive_task_timer(struct sched_dl_entity *dl_se);
|
sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.
Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.
Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.
The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.
The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.
To summarize, this patch:
- introduces the data structures, constants and symbols needed;
- implements the core logic of the scheduling algorithm in the new
scheduling class file;
- provides all the glue code between the new scheduling class and
the core scheduler and refines the interactions between sched/dl
and the other existing scheduling classes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-28 18:14:43 +08:00
|
|
|
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
#define BW_SHIFT 20
|
|
|
|
#define BW_UNIT (1 << BW_SHIFT)
|
|
|
|
#define RATIO_SHIFT 8
|
2020-04-25 18:52:48 +08:00
|
|
|
#define MAX_BW_BITS (64 - BW_SHIFT)
|
|
|
|
#define MAX_BW ((1ULL << MAX_BW_BITS) - 1)
|
sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.
Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).
Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.
However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).
Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.
This patch, therefore:
- adds system wide deadline bandwidth management by means of:
* /proc/sys/kernel/sched_dl_runtime_us,
* /proc/sys/kernel/sched_dl_period_us,
that determine (i.e., runtime / period) the total bandwidth
available on each CPU of each root_domain for -deadline tasks;
- couples the RT and deadline bandwidth management, i.e., enforces
that the sum of how much bandwidth is being devoted to -rt
-deadline tasks to stay below 100%.
This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:
M * (sched_dl_runtime_us / sched_dl_period_us)
It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-07 21:43:45 +08:00
|
|
|
unsigned long to_ratio(u64 period, u64 runtime);
|
|
|
|
|
2015-07-15 08:04:39 +08:00
|
|
|
extern void init_entity_runnable_average(struct sched_entity *se);
|
2019-01-23 00:25:01 +08:00
|
|
|
extern void post_init_entity_util_avg(struct task_struct *p);
|
2013-06-20 10:18:47 +08:00
|
|
|
|
2015-07-18 04:25:49 +08:00
|
|
|
#ifdef CONFIG_NO_HZ_FULL
|
|
|
|
extern bool sched_can_stop_tick(struct rq *rq);
|
2018-02-21 12:17:27 +08:00
|
|
|
extern int __init sched_tick_offload_init(void);
|
2015-07-18 04:25:49 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Tick may be needed by tasks in the runqueue depending on their policy and
|
|
|
|
* requirements. If tick is needed, lets send the target an IPI to kick it out of
|
|
|
|
* nohz mode if necessary.
|
|
|
|
*/
|
|
|
|
static inline void sched_update_tick_dependency(struct rq *rq)
|
|
|
|
{
|
2020-07-28 19:17:55 +08:00
|
|
|
int cpu = cpu_of(rq);
|
2015-07-18 04:25:49 +08:00
|
|
|
|
|
|
|
if (!tick_nohz_full_cpu(cpu))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (sched_can_stop_tick(rq))
|
|
|
|
tick_nohz_dep_clear_cpu(cpu, TICK_DEP_BIT_SCHED);
|
|
|
|
else
|
|
|
|
tick_nohz_dep_set_cpu(cpu, TICK_DEP_BIT_SCHED);
|
|
|
|
}
|
|
|
|
#else
|
2018-02-21 12:17:27 +08:00
|
|
|
static inline int sched_tick_offload_init(void) { return 0; }
|
2015-07-18 04:25:49 +08:00
|
|
|
static inline void sched_update_tick_dependency(struct rq *rq) { }
|
|
|
|
#endif
|
|
|
|
|
2014-05-09 07:00:14 +08:00
|
|
|
static inline void add_nr_running(struct rq *rq, unsigned count)
|
2011-10-25 16:00:11 +08:00
|
|
|
{
|
2014-05-09 07:00:14 +08:00
|
|
|
unsigned prev_nr = rq->nr_running;
|
|
|
|
|
|
|
|
rq->nr_running = prev_nr + count;
|
2020-06-30 03:23:03 +08:00
|
|
|
if (trace_sched_update_nr_running_tp_enabled()) {
|
|
|
|
call_trace_sched_update_nr_running(rq, count);
|
|
|
|
}
|
2013-04-20 20:35:09 +08:00
|
|
|
|
2014-06-24 03:16:49 +08:00
|
|
|
#ifdef CONFIG_SMP
|
2018-11-06 13:42:57 +08:00
|
|
|
if (prev_nr < 2 && rq->nr_running >= 2) {
|
2018-07-04 18:17:46 +08:00
|
|
|
if (!READ_ONCE(rq->rd->overload))
|
|
|
|
WRITE_ONCE(rq->rd->overload, 1);
|
2014-06-24 03:16:49 +08:00
|
|
|
}
|
2018-11-06 13:42:57 +08:00
|
|
|
#endif
|
2015-07-18 04:25:49 +08:00
|
|
|
|
|
|
|
sched_update_tick_dependency(rq);
|
2011-10-25 16:00:11 +08:00
|
|
|
}
|
|
|
|
|
2014-05-09 07:00:14 +08:00
|
|
|
static inline void sub_nr_running(struct rq *rq, unsigned count)
|
2011-10-25 16:00:11 +08:00
|
|
|
{
|
2014-05-09 07:00:14 +08:00
|
|
|
rq->nr_running -= count;
|
2020-06-30 03:23:03 +08:00
|
|
|
if (trace_sched_update_nr_running_tp_enabled()) {
|
2020-08-06 04:31:38 +08:00
|
|
|
call_trace_sched_update_nr_running(rq, -count);
|
2020-06-30 03:23:03 +08:00
|
|
|
}
|
|
|
|
|
2015-07-18 04:25:49 +08:00
|
|
|
/* Check if we still need preemption */
|
|
|
|
sched_update_tick_dependency(rq);
|
2011-10-25 16:00:11 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
extern void activate_task(struct rq *rq, struct task_struct *p, int flags);
|
|
|
|
extern void deactivate_task(struct rq *rq, struct task_struct *p, int flags);
|
|
|
|
|
|
|
|
extern void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags);
|
|
|
|
|
|
|
|
extern const_debug unsigned int sysctl_sched_nr_migrate;
|
|
|
|
extern const_debug unsigned int sysctl_sched_migration_cost;
|
|
|
|
|
2021-06-06 19:54:51 +08:00
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
|
|
|
extern unsigned int sysctl_sched_latency;
|
|
|
|
extern unsigned int sysctl_sched_min_granularity;
|
2021-08-20 09:04:02 +08:00
|
|
|
extern unsigned int sysctl_sched_idle_min_granularity;
|
2021-06-06 19:54:51 +08:00
|
|
|
extern unsigned int sysctl_sched_wakeup_granularity;
|
|
|
|
extern int sysctl_resched_latency_warn_ms;
|
|
|
|
extern int sysctl_resched_latency_warn_once;
|
|
|
|
|
|
|
|
extern unsigned int sysctl_sched_tunable_scaling;
|
|
|
|
|
|
|
|
extern unsigned int sysctl_numa_balancing_scan_delay;
|
|
|
|
extern unsigned int sysctl_numa_balancing_scan_period_min;
|
|
|
|
extern unsigned int sysctl_numa_balancing_scan_period_max;
|
|
|
|
extern unsigned int sysctl_numa_balancing_scan_size;
|
|
|
|
#endif
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_SCHED_HRTICK
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Use hrtick when:
|
|
|
|
* - enabled by features
|
|
|
|
* - hrtimer is actually high res
|
|
|
|
*/
|
|
|
|
static inline int hrtick_enabled(struct rq *rq)
|
|
|
|
{
|
|
|
|
if (!cpu_active(cpu_of(rq)))
|
|
|
|
return 0;
|
|
|
|
return hrtimer_is_hres_active(&rq->hrtick_timer);
|
|
|
|
}
|
|
|
|
|
2021-02-08 15:35:54 +08:00
|
|
|
static inline int hrtick_enabled_fair(struct rq *rq)
|
|
|
|
{
|
|
|
|
if (!sched_feat(HRTICK))
|
|
|
|
return 0;
|
|
|
|
return hrtick_enabled(rq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int hrtick_enabled_dl(struct rq *rq)
|
|
|
|
{
|
|
|
|
if (!sched_feat(HRTICK_DL))
|
|
|
|
return 0;
|
|
|
|
return hrtick_enabled(rq);
|
|
|
|
}
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
void hrtick_start(struct rq *rq, u64 delay);
|
|
|
|
|
2011-11-22 22:20:07 +08:00
|
|
|
#else
|
|
|
|
|
2021-02-08 15:35:54 +08:00
|
|
|
static inline int hrtick_enabled_fair(struct rq *rq)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int hrtick_enabled_dl(struct rq *rq)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-11-22 22:20:07 +08:00
|
|
|
static inline int hrtick_enabled(struct rq *rq)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#endif /* CONFIG_SCHED_HRTICK */
|
|
|
|
|
x86, sched: Add support for frequency invariance
Implement arch_scale_freq_capacity() for 'modern' x86. This function
is used by the scheduler to correctly account usage in the face of
DVFS.
The present patch addresses Intel processors specifically and has positive
performance and performance-per-watt implications for the schedutil cpufreq
governor, bringing it closer to, if not on-par with, the powersave governor
from the intel_pstate driver/framework.
Large performance gains are obtained when the machine is lightly loaded and
no regression are observed at saturation. The benchmarks with the largest
gains are kernel compilation, tbench (the networking version of dbench) and
shell-intensive workloads.
1. FREQUENCY INVARIANCE: MOTIVATION
* Without it, a task looks larger if the CPU runs slower
2. PECULIARITIES OF X86
* freq invariance accounting requires knowing the ratio freq_curr/freq_max
2.1 CURRENT FREQUENCY
* Use delta_APERF / delta_MPERF * freq_base (a.k.a "BusyMHz")
2.2 MAX FREQUENCY
* It varies with time (turbo). As an approximation, we set it to a
constant, i.e. 4-cores turbo frequency.
3. EFFECTS ON THE SCHEDUTIL FREQUENCY GOVERNOR
* The invariant schedutil's formula has no feedback loop and reacts faster
to utilization changes
4. KNOWN LIMITATIONS
* In some cases tasks can't reach max util despite how hard they try
5. PERFORMANCE TESTING
5.1 MACHINES
* Skylake, Broadwell, Haswell
5.2 SETUP
* baseline Linux v5.2 w/ non-invariant schedutil. Tested freq_max = 1-2-3-4-8-12
active cores turbo w/ invariant schedutil, and intel_pstate/powersave
5.3 BENCHMARK RESULTS
5.3.1 NEUTRAL BENCHMARKS
* NAS Parallel Benchmark (HPC), hackbench
5.3.2 NON-NEUTRAL BENCHMARKS
* tbench (10-30% better), kernbench (10-15% better),
shell-intensive-scripts (30-50% better)
* no regressions
5.3.3 SELECTION OF DETAILED RESULTS
5.3.4 POWER CONSUMPTION, PERFORMANCE-PER-WATT
* dbench (5% worse on one machine), kernbench (3% worse),
tbench (5-10% better), shell-intensive-scripts (10-40% better)
6. MICROARCH'ES ADDRESSED HERE
* Xeon Core before Scalable Performance processors line (Xeon Gold/Platinum
etc have different MSRs semantic for querying turbo levels)
7. REFERENCES
* MMTests performance testing framework, github.com/gormanm/mmtests
+-------------------------------------------------------------------------+
| 1. FREQUENCY INVARIANCE: MOTIVATION
+-------------------------------------------------------------------------+
For example; suppose a CPU has two frequencies: 500 and 1000 Mhz. When
running a task that would consume 1/3rd of a CPU at 1000 MHz, it would
appear to consume 2/3rd (or 66.6%) when running at 500 MHz, giving the
false impression this CPU is almost at capacity, even though it can go
faster [*]. In a nutshell, without frequency scale-invariance tasks look
larger just because the CPU is running slower.
[*] (footnote: this assumes a linear frequency/performance relation; which
everybody knows to be false, but given realities its the best approximation
we can make.)
+-------------------------------------------------------------------------+
| 2. PECULIARITIES OF X86
+-------------------------------------------------------------------------+
Accounting for frequency changes in PELT signals requires the computation of
the ratio freq_curr / freq_max. On x86 neither of those terms is readily
available.
2.1 CURRENT FREQUENCY
====================
Since modern x86 has hardware control over the actual frequency we run
at (because amongst other things, Turbo-Mode), we cannot simply use
the frequency as requested through cpufreq.
Instead we use the APERF/MPERF MSRs to compute the effective frequency
over the recent past. Also, because reading MSRs is expensive, don't
do so every time we need the value, but amortize the cost by doing it
every tick.
2.2 MAX FREQUENCY
=================
Obtaining freq_max is also non-trivial because at any time the hardware can
provide a frequency boost to a selected subset of cores if the package has
enough power to spare (eg: Turbo Boost). This means that the maximum frequency
available to a given core changes with time.
The approach taken in this change is to arbitrarily set freq_max to a constant
value at boot. The value chosen is the "4-cores (4C) turbo frequency" on most
microarchitectures, after evaluating the following candidates:
* 1-core (1C) turbo frequency (the fastest turbo state available)
* around base frequency (a.k.a. max P-state)
* something in between, such as 4C turbo
To interpret these options, consider that this is the denominator in
freq_curr/freq_max, and that ratio will be used to scale PELT signals such as
util_avg and load_avg. A large denominator will undershoot (util_avg looks a
bit smaller than it really is), viceversa with a smaller denominator PELT
signals will tend to overshoot. Given that PELT drives frequency selection
in the schedutil governor, we will have:
freq_max set to | effect on DVFS
--------------------+------------------
1C turbo | power efficiency (lower freq choices)
base freq | performance (higher util_avg, higher freq requests)
4C turbo | a bit of both
4C turbo proves to be a good compromise in a number of benchmarks (see below).
+-------------------------------------------------------------------------+
| 3. EFFECTS ON THE SCHEDUTIL FREQUENCY GOVERNOR
+-------------------------------------------------------------------------+
Once an architecture implements a frequency scale-invariant utilization (the
PELT signal util_avg), schedutil switches its frequency selection formula from
freq_next = 1.25 * freq_curr * util [non-invariant util signal]
to
freq_next = 1.25 * freq_max * util [invariant util signal]
where, in the second formula, freq_max is set to the 1C turbo frequency (max
turbo). The advantage of the second formula, whose usage we unlock with this
patch, is that freq_next doesn't depend on the current frequency in an
iterative fashion, but can jump to any frequency in a single update. This
absence of feedback in the formula makes it quicker to react to utilization
changes and more robust against pathological instabilities.
Compare it to the update formula of intel_pstate/powersave:
freq_next = 1.25 * freq_max * Busy%
where again freq_max is 1C turbo and Busy% is the percentage of time not spent
idling (calculated with delta_MPERF / delta_TSC); essentially the same as
invariant schedutil, and largely responsible for intel_pstate/powersave good
reputation. The non-invariant schedutil formula is derived from the invariant
one by approximating util_inv with util_raw * freq_curr / freq_max, but this
has limitations.
Testing shows improved performances due to better frequency selections when
the machine is lightly loaded, and essentially no change in behaviour at
saturation / overutilization.
+-------------------------------------------------------------------------+
| 4. KNOWN LIMITATIONS
+-------------------------------------------------------------------------+
It's been shown that it is possible to create pathological scenarios where a
CPU-bound task cannot reach max utilization, if the normalizing factor
freq_max is fixed to a constant value (see [Lelli-2018]).
If freq_max is set to 4C turbo as we do here, one needs to peg at least 5
cores in a package doing some busywork, and observe that none of those task
will ever reach max util (1024) because they're all running at less than the
4C turbo frequency.
While this concern still applies, we believe the performance benefit of
frequency scale-invariant PELT signals outweights the cost of this limitation.
[Lelli-2018]
https://lore.kernel.org/lkml/20180517150418.GF22493@localhost.localdomain/
+-------------------------------------------------------------------------+
| 5. PERFORMANCE TESTING
+-------------------------------------------------------------------------+
5.1 MACHINES
============
We tested the patch on three machines, with Skylake, Broadwell and Haswell
CPUs. The details are below, together with the available turbo ratios as
reported by the appropriate MSRs.
* 8x-SKYLAKE-UMA:
Single socket E3-1240 v5, Skylake 4 cores/8 threads
Max EFFiciency, BASE frequency and available turbo levels (MHz):
EFFIC 800 |********
BASE 3500 |***********************************
4C 3700 |*************************************
3C 3800 |**************************************
2C 3900 |***************************************
1C 3900 |***************************************
* 80x-BROADWELL-NUMA:
Two sockets E5-2698 v4, 2x Broadwell 20 cores/40 threads
Max EFFiciency, BASE frequency and available turbo levels (MHz):
EFFIC 1200 |************
BASE 2200 |**********************
8C 2900 |*****************************
7C 3000 |******************************
6C 3100 |*******************************
5C 3200 |********************************
4C 3300 |*********************************
3C 3400 |**********************************
2C 3600 |************************************
1C 3600 |************************************
* 48x-HASWELL-NUMA
Two sockets E5-2670 v3, 2x Haswell 12 cores/24 threads
Max EFFiciency, BASE frequency and available turbo levels (MHz):
EFFIC 1200 |************
BASE 2300 |***********************
12C 2600 |**************************
11C 2600 |**************************
10C 2600 |**************************
9C 2600 |**************************
8C 2600 |**************************
7C 2600 |**************************
6C 2600 |**************************
5C 2700 |***************************
4C 2800 |****************************
3C 2900 |*****************************
2C 3100 |*******************************
1C 3100 |*******************************
5.2 SETUP
=========
* The baseline is Linux v5.2 with schedutil (non-invariant) and the intel_pstate
driver in passive mode.
* The rationale for choosing the various freq_max values to test have been to
try all the 1-2-3-4C turbo levels (note that 1C and 2C turbo are identical
on all machines), plus one more value closer to base_freq but still in the
turbo range (8C turbo for both 80x-BROADWELL-NUMA and 48x-HASWELL-NUMA).
* In addition we've run all tests with intel_pstate/powersave for comparison.
* The filesystem is always XFS, the userspace is openSUSE Leap 15.1.
* 8x-SKYLAKE-UMA is capable of HWP (Hardware-Managed P-States), so the runs
with active intel_pstate on this machine use that.
This gives, in terms of combinations tested on each machine:
* 8x-SKYLAKE-UMA
* Baseline: Linux v5.2, non-invariant schedutil, intel_pstate passive
* intel_pstate active + powersave + HWP
* invariant schedutil, freq_max = 1C turbo
* invariant schedutil, freq_max = 3C turbo
* invariant schedutil, freq_max = 4C turbo
* both 80x-BROADWELL-NUMA and 48x-HASWELL-NUMA
* [same as 8x-SKYLAKE-UMA, but no HWP capable]
* invariant schedutil, freq_max = 8C turbo
(which on 48x-HASWELL-NUMA is the same as 12C turbo, or "all cores turbo")
5.3 BENCHMARK RESULTS
=====================
5.3.1 NEUTRAL BENCHMARKS
------------------------
Tests that didn't show any measurable difference in performance on any of the
test machines between non-invariant schedutil and our patch are:
* NAS Parallel Benchmarks (NPB) using either MPI or openMP for IPC, any
computational kernel
* flexible I/O (FIO)
* hackbench (using threads or processes, and using pipes or sockets)
5.3.2 NON-NEUTRAL BENCHMARKS
----------------------------
What follow are summary tables where each benchmark result is given a score.
* A tilde (~) means a neutral result, i.e. no difference from baseline.
* Scores are computed with the ratio result_new / result_baseline, so a tilde
means a score of 1.00.
* The results in the score ratio are the geometric means of results running
the benchmark with different parameters (eg: for kernbench: using 1, 2, 4,
... number of processes; for pgbench: varying the number of clients, and so
on).
* The first three tables show higher-is-better kind of tests (i.e. measured in
operations/second), the subsequent three show lower-is-better kind of tests
(i.e. the workload is fixed and we measure elapsed time, think kernbench).
* "gitsource" is a name we made up for the test consisting in running the
entire unit tests suite of the Git SCM and measuring how long it takes. We
take it as a typical example of shell-intensive serialized workload.
* In the "I_PSTATE" column we have the results for intel_pstate/powersave. Other
columns show invariant schedutil for different values of freq_max. 4C turbo
is circled as it's the value we've chosen for the final implementation.
80x-BROADWELL-NUMA (comparison ratio; higher is better)
+------+
I_PSTATE 1C 3C | 4C | 8C
pgbench-ro 1.14 ~ ~ | 1.11 | 1.14
pgbench-rw ~ ~ ~ | ~ | ~
netperf-udp 1.06 ~ 1.06 | 1.05 | 1.07
netperf-tcp ~ 1.03 ~ | 1.01 | 1.02
tbench4 1.57 1.18 1.22 | 1.30 | 1.56
+------+
8x-SKYLAKE-UMA (comparison ratio; higher is better)
+------+
I_PSTATE/HWP 1C 3C | 4C |
pgbench-ro ~ ~ ~ | ~ |
pgbench-rw ~ ~ ~ | ~ |
netperf-udp ~ ~ ~ | ~ |
netperf-tcp ~ ~ ~ | ~ |
tbench4 1.30 1.14 1.14 | 1.16 |
+------+
48x-HASWELL-NUMA (comparison ratio; higher is better)
+------+
I_PSTATE 1C 3C | 4C | 12C
pgbench-ro 1.15 ~ ~ | 1.06 | 1.16
pgbench-rw ~ ~ ~ | ~ | ~
netperf-udp 1.05 0.97 1.04 | 1.04 | 1.02
netperf-tcp 0.96 1.01 1.01 | 1.01 | 1.01
tbench4 1.50 1.05 1.13 | 1.13 | 1.25
+------+
In the table above we see that active intel_pstate is slightly better than our
4C-turbo patch (both in reference to the baseline non-invariant schedutil) on
read-only pgbench and much better on tbench. Both cases are notable in which
it shows that lowering our freq_max (to 8C-turbo and 12C-turbo on
80x-BROADWELL-NUMA and 48x-HASWELL-NUMA respectively) helps invariant
schedutil to get closer.
If we ignore active intel_pstate and focus on the comparison with baseline
alone, there are several instances of double-digit performance improvement.
80x-BROADWELL-NUMA (comparison ratio; lower is better)
+------+
I_PSTATE 1C 3C | 4C | 8C
dbench4 1.23 0.95 0.95 | 0.95 | 0.95
kernbench 0.93 0.83 0.83 | 0.83 | 0.82
gitsource 0.98 0.49 0.49 | 0.49 | 0.48
+------+
8x-SKYLAKE-UMA (comparison ratio; lower is better)
+------+
I_PSTATE/HWP 1C 3C | 4C |
dbench4 ~ ~ ~ | ~ |
kernbench ~ ~ ~ | ~ |
gitsource 0.92 0.55 0.55 | 0.55 |
+------+
48x-HASWELL-NUMA (comparison ratio; lower is better)
+------+
I_PSTATE 1C 3C | 4C | 8C
dbench4 ~ ~ ~ | ~ | ~
kernbench 0.94 0.90 0.89 | 0.90 | 0.90
gitsource 0.97 0.69 0.69 | 0.69 | 0.69
+------+
dbench is not very remarkable here, unless we notice how poorly active
intel_pstate is performing on 80x-BROADWELL-NUMA: 23% regression versus
non-invariant schedutil. We repeated that run getting consistent results. Out
of scope for the patch at hand, but deserving future investigation. Other than
that, we previously ran this campaign with Linux v5.0 and saw the patch doing
better on dbench a the time. We haven't checked closely and can only speculate
at this point.
On the NUMA boxes kernbench gets 10-15% improvements on average; we'll see in
the detailed tables that the gains concentrate on low process counts (lightly
loaded machines).
The test we call "gitsource" (running the git unit test suite, a long-running
single-threaded shell script) appears rather spectacular in this table (gains
of 30-50% depending on the machine). It is to be noted, however, that
gitsource has no adjustable parameters (such as the number of jobs in
kernbench, which we average over in order to get a single-number summary
score) and is exactly the kind of low-parallelism workload that benefits the
most from this patch. When looking at the detailed tables of kernbench or
tbench4, at low process or client counts one can see similar numbers.
5.3.3 SELECTION OF DETAILED RESULTS
-----------------------------------
Machine : 48x-HASWELL-NUMA
Benchmark : tbench4 (i.e. dbench4 over the network, actually loopback)
Varying parameter : number of clients
Unit : MB/sec (higher is better)
5.2.0 vanilla (BASELINE) 5.2.0 intel_pstate 5.2.0 1C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean 1 126.73 +- 0.31% ( ) 315.91 +- 0.66% ( 149.28%) 125.03 +- 0.76% ( -1.34%)
Hmean 2 258.04 +- 0.62% ( ) 614.16 +- 0.51% ( 138.01%) 269.58 +- 1.45% ( 4.47%)
Hmean 4 514.30 +- 0.67% ( ) 1146.58 +- 0.54% ( 122.94%) 533.84 +- 1.99% ( 3.80%)
Hmean 8 1111.38 +- 2.52% ( ) 2159.78 +- 0.38% ( 94.33%) 1359.92 +- 1.56% ( 22.36%)
Hmean 16 2286.47 +- 1.36% ( ) 3338.29 +- 0.21% ( 46.00%) 2720.20 +- 0.52% ( 18.97%)
Hmean 32 4704.84 +- 0.35% ( ) 4759.03 +- 0.43% ( 1.15%) 4774.48 +- 0.30% ( 1.48%)
Hmean 64 7578.04 +- 0.27% ( ) 7533.70 +- 0.43% ( -0.59%) 7462.17 +- 0.65% ( -1.53%)
Hmean 128 6998.52 +- 0.16% ( ) 6987.59 +- 0.12% ( -0.16%) 6909.17 +- 0.14% ( -1.28%)
Hmean 192 6901.35 +- 0.25% ( ) 6913.16 +- 0.10% ( 0.17%) 6855.47 +- 0.21% ( -0.66%)
5.2.0 3C-turbo 5.2.0 4C-turbo 5.2.0 12C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean 1 128.43 +- 0.28% ( 1.34%) 130.64 +- 3.81% ( 3.09%) 153.71 +- 5.89% ( 21.30%)
Hmean 2 311.70 +- 6.15% ( 20.79%) 281.66 +- 3.40% ( 9.15%) 305.08 +- 5.70% ( 18.23%)
Hmean 4 641.98 +- 2.32% ( 24.83%) 623.88 +- 5.28% ( 21.31%) 906.84 +- 4.65% ( 76.32%)
Hmean 8 1633.31 +- 1.56% ( 46.96%) 1714.16 +- 0.93% ( 54.24%) 2095.74 +- 0.47% ( 88.57%)
Hmean 16 3047.24 +- 0.42% ( 33.27%) 3155.02 +- 0.30% ( 37.99%) 3634.58 +- 0.15% ( 58.96%)
Hmean 32 4734.31 +- 0.60% ( 0.63%) 4804.38 +- 0.23% ( 2.12%) 4674.62 +- 0.27% ( -0.64%)
Hmean 64 7699.74 +- 0.35% ( 1.61%) 7499.72 +- 0.34% ( -1.03%) 7659.03 +- 0.25% ( 1.07%)
Hmean 128 6935.18 +- 0.15% ( -0.91%) 6942.54 +- 0.10% ( -0.80%) 7004.85 +- 0.12% ( 0.09%)
Hmean 192 6901.62 +- 0.12% ( 0.00%) 6856.93 +- 0.10% ( -0.64%) 6978.74 +- 0.10% ( 1.12%)
This is one of the cases where the patch still can't surpass active
intel_pstate, not even when freq_max is as low as 12C-turbo. Otherwise, gains are
visible up to 16 clients and the saturated scenario is the same as baseline.
The scores in the summary table from the previous sections are ratios of
geometric means of the results over different clients, as seen in this table.
Machine : 80x-BROADWELL-NUMA
Benchmark : kernbench (kernel compilation)
Varying parameter : number of jobs
Unit : seconds (lower is better)
5.2.0 vanilla (BASELINE) 5.2.0 intel_pstate 5.2.0 1C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 2 379.68 +- 0.06% ( ) 330.20 +- 0.43% ( 13.03%) 285.93 +- 0.07% ( 24.69%)
Amean 4 200.15 +- 0.24% ( ) 175.89 +- 0.22% ( 12.12%) 153.78 +- 0.25% ( 23.17%)
Amean 8 106.20 +- 0.31% ( ) 95.54 +- 0.23% ( 10.03%) 86.74 +- 0.10% ( 18.32%)
Amean 16 56.96 +- 1.31% ( ) 53.25 +- 1.22% ( 6.50%) 48.34 +- 1.73% ( 15.13%)
Amean 32 34.80 +- 2.46% ( ) 33.81 +- 0.77% ( 2.83%) 30.28 +- 1.59% ( 12.99%)
Amean 64 26.11 +- 1.63% ( ) 25.04 +- 1.07% ( 4.10%) 22.41 +- 2.37% ( 14.16%)
Amean 128 24.80 +- 1.36% ( ) 23.57 +- 1.23% ( 4.93%) 21.44 +- 1.37% ( 13.55%)
Amean 160 24.85 +- 0.56% ( ) 23.85 +- 1.17% ( 4.06%) 21.25 +- 1.12% ( 14.49%)
5.2.0 3C-turbo 5.2.0 4C-turbo 5.2.0 8C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 2 284.08 +- 0.13% ( 25.18%) 283.96 +- 0.51% ( 25.21%) 285.05 +- 0.21% ( 24.92%)
Amean 4 153.18 +- 0.22% ( 23.47%) 154.70 +- 1.64% ( 22.71%) 153.64 +- 0.30% ( 23.24%)
Amean 8 87.06 +- 0.28% ( 18.02%) 86.77 +- 0.46% ( 18.29%) 86.78 +- 0.22% ( 18.28%)
Amean 16 48.03 +- 0.93% ( 15.68%) 47.75 +- 1.99% ( 16.17%) 47.52 +- 1.61% ( 16.57%)
Amean 32 30.23 +- 1.20% ( 13.14%) 30.08 +- 1.67% ( 13.57%) 30.07 +- 1.67% ( 13.60%)
Amean 64 22.59 +- 2.02% ( 13.50%) 22.63 +- 0.81% ( 13.32%) 22.42 +- 0.76% ( 14.12%)
Amean 128 21.37 +- 0.67% ( 13.82%) 21.31 +- 1.15% ( 14.07%) 21.17 +- 1.93% ( 14.63%)
Amean 160 21.68 +- 0.57% ( 12.76%) 21.18 +- 1.74% ( 14.77%) 21.22 +- 1.00% ( 14.61%)
The patch outperform active intel_pstate (and baseline) by a considerable
margin; the summary table from the previous section says 4C turbo and active
intel_pstate are 0.83 and 0.93 against baseline respectively, so 4C turbo is
0.83/0.93=0.89 against intel_pstate (~10% better on average). There is no
noticeable difference with regard to the value of freq_max.
Machine : 8x-SKYLAKE-UMA
Benchmark : gitsource (time to run the git unit test suite)
Varying parameter : none
Unit : seconds (lower is better)
5.2.0 vanilla 5.2.0 intel_pstate/hwp 5.2.0 1C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 858.85 +- 1.16% ( ) 791.94 +- 0.21% ( 7.79%) 474.95 ( 44.70%)
5.2.0 3C-turbo 5.2.0 4C-turbo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 475.26 +- 0.20% ( 44.66%) 474.34 +- 0.13% ( 44.77%)
In this test, which is of interest as representing shell-intensive
(i.e. fork-intensive) serialized workloads, invariant schedutil outperforms
intel_pstate/powersave by a whopping 40% margin.
5.3.4 POWER CONSUMPTION, PERFORMANCE-PER-WATT
---------------------------------------------
The following table shows average power consumption in watt for each
benchmark. Data comes from turbostat (package average), which in turn is read
from the RAPL interface on CPUs. We know the patch affects CPU frequencies so
it's reasonable to ignore other power consumers (such as memory or I/O). Also,
we don't have a power meter available in the lab so RAPL is the best we have.
turbostat sampled average power every 10 seconds for the entire duration of
each benchmark. We took all those values and averaged them (i.e. with don't
have detail on a per-parameter granularity, only on whole benchmarks).
80x-BROADWELL-NUMA (power consumption, watts)
+--------+
BASELINE I_PSTATE 1C 3C | 4C | 8C
pgbench-ro 130.01 142.77 131.11 132.45 | 134.65 | 136.84
pgbench-rw 68.30 60.83 71.45 71.70 | 71.65 | 72.54
dbench4 90.25 59.06 101.43 99.89 | 101.10 | 102.94
netperf-udp 65.70 69.81 66.02 68.03 | 68.27 | 68.95
netperf-tcp 88.08 87.96 88.97 88.89 | 88.85 | 88.20
tbench4 142.32 176.73 153.02 163.91 | 165.58 | 176.07
kernbench 92.94 101.95 114.91 115.47 | 115.52 | 115.10
gitsource 40.92 41.87 75.14 75.20 | 75.40 | 75.70
+--------+
8x-SKYLAKE-UMA (power consumption, watts)
+--------+
BASELINE I_PSTATE/HWP 1C 3C | 4C |
pgbench-ro 46.49 46.68 46.56 46.59 | 46.52 |
pgbench-rw 29.34 31.38 30.98 31.00 | 31.00 |
dbench4 27.28 27.37 27.49 27.41 | 27.38 |
netperf-udp 22.33 22.41 22.36 22.35 | 22.36 |
netperf-tcp 27.29 27.29 27.30 27.31 | 27.33 |
tbench4 41.13 45.61 43.10 43.33 | 43.56 |
kernbench 42.56 42.63 43.01 43.01 | 43.01 |
gitsource 13.32 13.69 17.33 17.30 | 17.35 |
+--------+
48x-HASWELL-NUMA (power consumption, watts)
+--------+
BASELINE I_PSTATE 1C 3C | 4C | 12C
pgbench-ro 128.84 136.04 129.87 132.43 | 132.30 | 134.86
pgbench-rw 37.68 37.92 37.17 37.74 | 37.73 | 37.31
dbench4 28.56 28.73 28.60 28.73 | 28.70 | 28.79
netperf-udp 56.70 60.44 56.79 57.42 | 57.54 | 57.52
netperf-tcp 75.49 75.27 75.87 76.02 | 76.01 | 75.95
tbench4 115.44 139.51 119.53 123.07 | 123.97 | 130.22
kernbench 83.23 91.55 95.58 95.69 | 95.72 | 96.04
gitsource 36.79 36.99 39.99 40.34 | 40.35 | 40.23
+--------+
A lower power consumption isn't necessarily better, it depends on what is done
with that energy. Here are tables with the ratio of performance-per-watt on
each machine and benchmark. Higher is always better; a tilde (~) means a
neutral ratio (i.e. 1.00).
80x-BROADWELL-NUMA (performance-per-watt ratios; higher is better)
+------+
I_PSTATE 1C 3C | 4C | 8C
pgbench-ro 1.04 1.06 0.94 | 1.07 | 1.08
pgbench-rw 1.10 0.97 0.96 | 0.96 | 0.97
dbench4 1.24 0.94 0.95 | 0.94 | 0.92
netperf-udp ~ 1.02 1.02 | ~ | 1.02
netperf-tcp ~ 1.02 ~ | ~ | 1.02
tbench4 1.26 1.10 1.06 | 1.12 | 1.26
kernbench 0.98 0.97 0.97 | 0.97 | 0.98
gitsource ~ 1.11 1.11 | 1.11 | 1.13
+------+
8x-SKYLAKE-UMA (performance-per-watt ratios; higher is better)
+------+
I_PSTATE/HWP 1C 3C | 4C |
pgbench-ro ~ ~ ~ | ~ |
pgbench-rw 0.95 0.97 0.96 | 0.96 |
dbench4 ~ ~ ~ | ~ |
netperf-udp ~ ~ ~ | ~ |
netperf-tcp ~ ~ ~ | ~ |
tbench4 1.17 1.09 1.08 | 1.10 |
kernbench ~ ~ ~ | ~ |
gitsource 1.06 1.40 1.40 | 1.40 |
+------+
48x-HASWELL-NUMA (performance-per-watt ratios; higher is better)
+------+
I_PSTATE 1C 3C | 4C | 12C
pgbench-ro 1.09 ~ 1.09 | 1.03 | 1.11
pgbench-rw ~ 0.86 ~ | ~ | 0.86
dbench4 ~ 1.02 1.02 | 1.02 | ~
netperf-udp ~ 0.97 1.03 | 1.02 | ~
netperf-tcp 0.96 ~ ~ | ~ | ~
tbench4 1.24 ~ 1.06 | 1.05 | 1.11
kernbench 0.97 0.97 0.98 | 0.97 | 0.96
gitsource 1.03 1.33 1.32 | 1.32 | 1.33
+------+
These results are overall pleasing: in plenty of cases we observe
performance-per-watt improvements. The few regressions (read/write pgbench and
dbench on the Broadwell machine) are of small magnitude. kernbench loses a few
percentage points (it has a 10-15% performance improvement, but apparently the
increase in power consumption is larger than that). tbench4 and gitsource, which
benefit the most from the patch, keep a positive score in this table which is
a welcome surprise; that suggests that in those particular workloads the
non-invariant schedutil (and active intel_pstate, too) makes some rather
suboptimal frequency selections.
+-------------------------------------------------------------------------+
| 6. MICROARCH'ES ADDRESSED HERE
+-------------------------------------------------------------------------+
The patch addresses Xeon Core processors that use MSR_PLATFORM_INFO and
MSR_TURBO_RATIO_LIMIT to advertise their base frequency and turbo frequencies
respectively. This excludes the recent Xeon Scalable Performance processors
line (Xeon Gold, Platinum etc) whose MSRs have to be parsed differently.
Subsequent patches will address:
* Xeon Scalable Performance processors and Atom Goldmont/Goldmont Plus
* Xeon Phi (Knights Landing, Knights Mill)
* Atom Silvermont
+-------------------------------------------------------------------------+
| 7. REFERENCES
+-------------------------------------------------------------------------+
Tests have been run with the help of the MMTests performance testing
framework, see github.com/gormanm/mmtests. The configuration file names for
the benchmark used are:
db-pgbench-timed-ro-small-xfs
db-pgbench-timed-rw-small-xfs
io-dbench4-async-xfs
network-netperf-unbound
network-tbench
scheduler-unbound
workload-kerndevel-xfs
workload-shellscripts-xfs
hpc-nas-c-class-mpi-full-xfs
hpc-nas-c-class-omp-full
All those benchmarks are generally available on the web:
pgbench: https://www.postgresql.org/docs/10/pgbench.html
netperf: https://hewlettpackard.github.io/netperf/
dbench/tbench: https://dbench.samba.org/
gitsource: git unit test suite, github.com/git/git
NAS Parallel Benchmarks: https://www.nas.nasa.gov/publications/npb.html
hackbench: https://people.redhat.com/mingo/cfs-scheduler/tools/hackbench.c
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200122151617.531-2-ggherdovich@suse.cz
2020-01-22 23:16:12 +08:00
|
|
|
#ifndef arch_scale_freq_tick
|
|
|
|
static __always_inline
|
|
|
|
void arch_scale_freq_tick(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2015-03-23 21:19:05 +08:00
|
|
|
#ifndef arch_scale_freq_capacity
|
2020-08-01 03:20:14 +08:00
|
|
|
/**
|
|
|
|
* arch_scale_freq_capacity - get the frequency scale factor of a given CPU.
|
|
|
|
* @cpu: the CPU in question.
|
|
|
|
*
|
|
|
|
* Return: the frequency scale factor normalized against SCHED_CAPACITY_SCALE, i.e.
|
|
|
|
*
|
|
|
|
* f_curr
|
|
|
|
* ------ * SCHED_CAPACITY_SCALE
|
|
|
|
* f_max
|
|
|
|
*/
|
2015-03-23 21:19:05 +08:00
|
|
|
static __always_inline
|
2017-12-04 18:23:23 +08:00
|
|
|
unsigned long arch_scale_freq_capacity(int cpu)
|
2015-03-23 21:19:05 +08:00
|
|
|
{
|
|
|
|
return SCHED_CAPACITY_SCALE;
|
|
|
|
}
|
|
|
|
#endif
|
2015-02-27 23:54:08 +08:00
|
|
|
|
2021-03-02 19:16:48 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
|
2021-03-02 19:16:48 +08:00
|
|
|
static inline bool rq_order_less(struct rq *rq1, struct rq *rq2)
|
|
|
|
{
|
2020-11-18 07:19:34 +08:00
|
|
|
#ifdef CONFIG_SCHED_CORE
|
|
|
|
/*
|
|
|
|
* In order to not have {0,2},{1,3} turn into into an AB-BA,
|
|
|
|
* order by core-id first and cpu-id second.
|
|
|
|
*
|
|
|
|
* Notably:
|
|
|
|
*
|
|
|
|
* double_rq_lock(0,3); will take core-0, core-1 lock
|
|
|
|
* double_rq_lock(1,2); will take core-1, core-0 lock
|
|
|
|
*
|
|
|
|
* when only cpu-id is considered.
|
|
|
|
*/
|
|
|
|
if (rq1->core->cpu < rq2->core->cpu)
|
|
|
|
return true;
|
|
|
|
if (rq1->core->cpu > rq2->core->cpu)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* __sched_core_flip() relies on SMT having cpu-id lock order.
|
|
|
|
*/
|
|
|
|
#endif
|
2021-03-02 19:16:48 +08:00
|
|
|
return rq1->cpu < rq2->cpu;
|
|
|
|
}
|
|
|
|
|
|
|
|
extern void double_rq_lock(struct rq *rq1, struct rq *rq2);
|
|
|
|
|
|
|
|
#ifdef CONFIG_PREEMPTION
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* fair double_lock_balance: Safely acquires both rq->locks in a fair
|
|
|
|
* way at the expense of forcing extra atomic operations in all
|
|
|
|
* invocations. This assures that the double_lock is acquired using the
|
|
|
|
* same underlying policy as the spinlock_t on this architecture, which
|
|
|
|
* reduces latency compared to the unfair variant below. However, it
|
|
|
|
* also adds more overhead and therefore may reduce throughput.
|
|
|
|
*/
|
|
|
|
static inline int _double_lock_balance(struct rq *this_rq, struct rq *busiest)
|
|
|
|
__releases(this_rq->lock)
|
|
|
|
__acquires(busiest->lock)
|
|
|
|
__acquires(this_rq->lock)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock(this_rq);
|
2011-10-25 16:00:11 +08:00
|
|
|
double_rq_lock(this_rq, busiest);
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
/*
|
|
|
|
* Unfair double_lock_balance: Optimizes throughput at the expense of
|
|
|
|
* latency by eliminating extra atomic operations when the locks are
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
* already in proper order on entry. This favors lower CPU-ids and will
|
|
|
|
* grant the double lock to lower CPUs over higher ids under contention,
|
2011-10-25 16:00:11 +08:00
|
|
|
* regardless of entry order into the function.
|
|
|
|
*/
|
|
|
|
static inline int _double_lock_balance(struct rq *this_rq, struct rq *busiest)
|
|
|
|
__releases(this_rq->lock)
|
|
|
|
__acquires(busiest->lock)
|
|
|
|
__acquires(this_rq->lock)
|
|
|
|
{
|
2021-03-03 23:45:41 +08:00
|
|
|
if (__rq_lockp(this_rq) == __rq_lockp(busiest))
|
2020-11-18 07:19:31 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (likely(raw_spin_rq_trylock(busiest)))
|
|
|
|
return 0;
|
|
|
|
|
2021-03-02 19:16:48 +08:00
|
|
|
if (rq_order_less(this_rq, busiest)) {
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_lock_nested(busiest, SINGLE_DEPTH_NESTING);
|
|
|
|
return 0;
|
2011-10-25 16:00:11 +08:00
|
|
|
}
|
2020-11-18 07:19:31 +08:00
|
|
|
|
|
|
|
raw_spin_rq_unlock(this_rq);
|
2021-03-02 19:16:48 +08:00
|
|
|
double_rq_lock(this_rq, busiest);
|
2020-11-18 07:19:31 +08:00
|
|
|
|
|
|
|
return 1;
|
2011-10-25 16:00:11 +08:00
|
|
|
}
|
|
|
|
|
2019-07-27 05:19:37 +08:00
|
|
|
#endif /* CONFIG_PREEMPTION */
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* double_lock_balance - lock the busiest runqueue, this_rq is locked already.
|
|
|
|
*/
|
|
|
|
static inline int double_lock_balance(struct rq *this_rq, struct rq *busiest)
|
|
|
|
{
|
2020-11-18 07:19:31 +08:00
|
|
|
lockdep_assert_irqs_disabled();
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
return _double_lock_balance(this_rq, busiest);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void double_unlock_balance(struct rq *this_rq, struct rq *busiest)
|
|
|
|
__releases(busiest->lock)
|
|
|
|
{
|
2021-03-03 23:45:41 +08:00
|
|
|
if (__rq_lockp(this_rq) != __rq_lockp(busiest))
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock(busiest);
|
2021-03-03 23:45:41 +08:00
|
|
|
lock_set_subclass(&__rq_lockp(this_rq)->dep_map, 0, _RET_IP_);
|
2011-10-25 16:00:11 +08:00
|
|
|
}
|
|
|
|
|
sched: Fix race in migrate_swap_stop()
There is a subtle race in migrate_swap, when task P, on CPU A, decides to swap
places with task T, on CPU B.
Task P:
- call migrate_swap
Task T:
- go to sleep, removing itself from the runqueue
Task P:
- double lock the runqueues on CPU A & B
Task T:
- get woken up, place itself on the runqueue of CPU C
Task P:
- see that task T is on a runqueue, and pretend to remove it
from the runqueue on CPU B
Now CPUs B & C both have corrupted scheduler data structures.
This patch fixes it, by holding the pi_lock for both of the tasks
involved in the migrate swap. This prevents task T from waking up,
and placing itself onto another runqueue, until after migrate_swap
has released all locks.
This means that, when migrate_swap checks, task T will be either
on the runqueue where it was originally seen, or not on any
runqueue at all. Migrate_swap deals correctly with of those cases.
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: hannes@cmpxchg.org
Cc: aarcange@redhat.com
Cc: srikar@linux.vnet.ibm.com
Cc: tglx@linutronix.de
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/20131010181722.GO13848@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-11 02:17:22 +08:00
|
|
|
static inline void double_lock(spinlock_t *l1, spinlock_t *l2)
|
|
|
|
{
|
|
|
|
if (l1 > l2)
|
|
|
|
swap(l1, l2);
|
|
|
|
|
|
|
|
spin_lock(l1);
|
|
|
|
spin_lock_nested(l2, SINGLE_DEPTH_NESTING);
|
|
|
|
}
|
|
|
|
|
2014-04-07 16:55:15 +08:00
|
|
|
static inline void double_lock_irq(spinlock_t *l1, spinlock_t *l2)
|
|
|
|
{
|
|
|
|
if (l1 > l2)
|
|
|
|
swap(l1, l2);
|
|
|
|
|
|
|
|
spin_lock_irq(l1);
|
|
|
|
spin_lock_nested(l2, SINGLE_DEPTH_NESTING);
|
|
|
|
}
|
|
|
|
|
sched: Fix race in migrate_swap_stop()
There is a subtle race in migrate_swap, when task P, on CPU A, decides to swap
places with task T, on CPU B.
Task P:
- call migrate_swap
Task T:
- go to sleep, removing itself from the runqueue
Task P:
- double lock the runqueues on CPU A & B
Task T:
- get woken up, place itself on the runqueue of CPU C
Task P:
- see that task T is on a runqueue, and pretend to remove it
from the runqueue on CPU B
Now CPUs B & C both have corrupted scheduler data structures.
This patch fixes it, by holding the pi_lock for both of the tasks
involved in the migrate swap. This prevents task T from waking up,
and placing itself onto another runqueue, until after migrate_swap
has released all locks.
This means that, when migrate_swap checks, task T will be either
on the runqueue where it was originally seen, or not on any
runqueue at all. Migrate_swap deals correctly with of those cases.
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: hannes@cmpxchg.org
Cc: aarcange@redhat.com
Cc: srikar@linux.vnet.ibm.com
Cc: tglx@linutronix.de
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/20131010181722.GO13848@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-11 02:17:22 +08:00
|
|
|
static inline void double_raw_lock(raw_spinlock_t *l1, raw_spinlock_t *l2)
|
|
|
|
{
|
|
|
|
if (l1 > l2)
|
|
|
|
swap(l1, l2);
|
|
|
|
|
|
|
|
raw_spin_lock(l1);
|
|
|
|
raw_spin_lock_nested(l2, SINGLE_DEPTH_NESTING);
|
|
|
|
}
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
/*
|
|
|
|
* double_rq_unlock - safely unlock two runqueues
|
|
|
|
*
|
|
|
|
* Note this does not restore interrupts like task_rq_unlock,
|
|
|
|
* you need to do so manually after calling.
|
|
|
|
*/
|
|
|
|
static inline void double_rq_unlock(struct rq *rq1, struct rq *rq2)
|
|
|
|
__releases(rq1->lock)
|
|
|
|
__releases(rq2->lock)
|
|
|
|
{
|
2021-03-03 23:45:41 +08:00
|
|
|
if (__rq_lockp(rq1) != __rq_lockp(rq2))
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock(rq2);
|
2011-10-25 16:00:11 +08:00
|
|
|
else
|
|
|
|
__release(rq2->lock);
|
2021-03-02 19:16:48 +08:00
|
|
|
raw_spin_rq_unlock(rq1);
|
2011-10-25 16:00:11 +08:00
|
|
|
}
|
|
|
|
|
2017-02-01 20:10:18 +08:00
|
|
|
extern void set_rq_online (struct rq *rq);
|
|
|
|
extern void set_rq_offline(struct rq *rq);
|
|
|
|
extern bool sched_smp_initialized;
|
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
#else /* CONFIG_SMP */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* double_rq_lock - safely lock two runqueues
|
|
|
|
*
|
|
|
|
* Note this does not disable interrupts like task_rq_lock,
|
|
|
|
* you need to do so manually before calling.
|
|
|
|
*/
|
|
|
|
static inline void double_rq_lock(struct rq *rq1, struct rq *rq2)
|
|
|
|
__acquires(rq1->lock)
|
|
|
|
__acquires(rq2->lock)
|
|
|
|
{
|
|
|
|
BUG_ON(!irqs_disabled());
|
|
|
|
BUG_ON(rq1 != rq2);
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_lock(rq1);
|
2011-10-25 16:00:11 +08:00
|
|
|
__acquire(rq2->lock); /* Fake it out ;) */
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* double_rq_unlock - safely unlock two runqueues
|
|
|
|
*
|
|
|
|
* Note this does not restore interrupts like task_rq_unlock,
|
|
|
|
* you need to do so manually after calling.
|
|
|
|
*/
|
|
|
|
static inline void double_rq_unlock(struct rq *rq1, struct rq *rq2)
|
|
|
|
__releases(rq1->lock)
|
|
|
|
__releases(rq2->lock)
|
|
|
|
{
|
|
|
|
BUG_ON(rq1 != rq2);
|
2020-11-18 07:19:31 +08:00
|
|
|
raw_spin_rq_unlock(rq1);
|
2011-10-25 16:00:11 +08:00
|
|
|
__release(rq2->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
extern struct sched_entity *__pick_first_entity(struct cfs_rq *cfs_rq);
|
|
|
|
extern struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq);
|
2015-06-26 01:21:41 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SCHED_DEBUG
|
2021-04-16 00:23:17 +08:00
|
|
|
extern bool sched_debug_verbose;
|
2017-09-07 23:03:53 +08:00
|
|
|
|
2011-10-25 16:00:11 +08:00
|
|
|
extern void print_cfs_stats(struct seq_file *m, int cpu);
|
|
|
|
extern void print_rt_stats(struct seq_file *m, int cpu);
|
2014-10-31 06:39:33 +08:00
|
|
|
extern void print_dl_stats(struct seq_file *m, int cpu);
|
2018-05-17 03:53:47 +08:00
|
|
|
extern void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq);
|
|
|
|
extern void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq);
|
|
|
|
extern void print_dl_rq(struct seq_file *m, int cpu, struct dl_rq *dl_rq);
|
2021-04-17 05:29:36 +08:00
|
|
|
|
|
|
|
extern void resched_latency_warn(int cpu, u64 latency);
|
2015-06-26 01:21:43 +08:00
|
|
|
#ifdef CONFIG_NUMA_BALANCING
|
|
|
|
extern void
|
|
|
|
show_numa_stats(struct task_struct *p, struct seq_file *m);
|
|
|
|
extern void
|
|
|
|
print_numa_stats(struct seq_file *m, int node, unsigned long tsf,
|
|
|
|
unsigned long tpf, unsigned long gsf, unsigned long gpf);
|
|
|
|
#endif /* CONFIG_NUMA_BALANCING */
|
2021-04-17 05:29:36 +08:00
|
|
|
#else
|
|
|
|
static inline void resched_latency_warn(int cpu, u64 latency) {}
|
2015-06-26 01:21:43 +08:00
|
|
|
#endif /* CONFIG_SCHED_DEBUG */
|
2011-10-25 16:00:11 +08:00
|
|
|
|
|
|
|
extern void init_cfs_rq(struct cfs_rq *cfs_rq);
|
2015-03-03 19:50:27 +08:00
|
|
|
extern void init_rt_rq(struct rt_rq *rt_rq);
|
|
|
|
extern void init_dl_rq(struct dl_rq *dl_rq);
|
2011-10-25 16:00:11 +08:00
|
|
|
|
2013-10-17 02:16:12 +08:00
|
|
|
extern void cfs_bandwidth_usage_inc(void);
|
|
|
|
extern void cfs_bandwidth_usage_dec(void);
|
2011-12-02 09:07:32 +08:00
|
|
|
|
2011-08-11 05:21:01 +08:00
|
|
|
#ifdef CONFIG_NO_HZ_COMMON
|
2017-12-21 22:06:50 +08:00
|
|
|
#define NOHZ_BALANCE_KICK_BIT 0
|
|
|
|
#define NOHZ_STATS_KICK_BIT 1
|
2021-02-24 21:30:06 +08:00
|
|
|
#define NOHZ_NEWILB_KICK_BIT 2
|
2021-08-23 19:16:59 +08:00
|
|
|
#define NOHZ_NEXT_KICK_BIT 3
|
2017-12-21 17:01:24 +08:00
|
|
|
|
2021-08-23 19:16:59 +08:00
|
|
|
/* Run rebalance_domains() */
|
2017-12-21 17:01:24 +08:00
|
|
|
#define NOHZ_BALANCE_KICK BIT(NOHZ_BALANCE_KICK_BIT)
|
2021-08-23 19:16:59 +08:00
|
|
|
/* Update blocked load */
|
2017-12-21 17:11:09 +08:00
|
|
|
#define NOHZ_STATS_KICK BIT(NOHZ_STATS_KICK_BIT)
|
2021-08-23 19:16:59 +08:00
|
|
|
/* Update blocked load when entering idle */
|
2021-02-24 21:30:06 +08:00
|
|
|
#define NOHZ_NEWILB_KICK BIT(NOHZ_NEWILB_KICK_BIT)
|
2021-08-23 19:16:59 +08:00
|
|
|
/* Update nohz.next_balance */
|
|
|
|
#define NOHZ_NEXT_KICK BIT(NOHZ_NEXT_KICK_BIT)
|
2017-12-21 17:11:09 +08:00
|
|
|
|
2021-08-23 19:16:59 +08:00
|
|
|
#define NOHZ_KICK_MASK (NOHZ_BALANCE_KICK | NOHZ_STATS_KICK | NOHZ_NEXT_KICK)
|
2011-12-02 09:07:32 +08:00
|
|
|
|
|
|
|
#define nohz_flags(cpu) (&cpu_rq(cpu)->nohz_flags)
|
2016-03-10 19:54:20 +08:00
|
|
|
|
2017-12-21 22:06:50 +08:00
|
|
|
extern void nohz_balance_exit_idle(struct rq *rq);
|
2016-03-10 19:54:20 +08:00
|
|
|
#else
|
2017-12-21 22:06:50 +08:00
|
|
|
static inline void nohz_balance_exit_idle(struct rq *rq) { }
|
2011-12-02 09:07:32 +08:00
|
|
|
#endif
|
2012-06-16 21:57:37 +08:00
|
|
|
|
2021-02-24 21:30:06 +08:00
|
|
|
#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
|
|
|
|
extern void nohz_run_idle_balance(int cpu);
|
|
|
|
#else
|
|
|
|
static inline void nohz_run_idle_balance(int cpu) { }
|
|
|
|
#endif
|
2017-05-19 04:13:36 +08:00
|
|
|
|
2012-06-16 21:57:37 +08:00
|
|
|
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
|
2016-09-26 08:29:20 +08:00
|
|
|
struct irqtime {
|
2017-04-25 22:10:48 +08:00
|
|
|
u64 total;
|
2017-01-31 11:09:32 +08:00
|
|
|
u64 tick_delta;
|
2016-09-26 08:29:20 +08:00
|
|
|
u64 irq_start_time;
|
|
|
|
struct u64_stats_sync sync;
|
|
|
|
};
|
2012-06-16 21:57:37 +08:00
|
|
|
|
2016-09-26 08:29:20 +08:00
|
|
|
DECLARE_PER_CPU(struct irqtime, cpu_irqtime);
|
2012-06-16 21:57:37 +08:00
|
|
|
|
2017-04-25 22:10:48 +08:00
|
|
|
/*
|
|
|
|
* Returns the irqtime minus the softirq time computed by ksoftirqd.
|
2021-03-18 20:38:50 +08:00
|
|
|
* Otherwise ksoftirqd's sum_exec_runtime is subtracted its own runtime
|
2017-04-25 22:10:48 +08:00
|
|
|
* and never move forward.
|
|
|
|
*/
|
2012-06-16 21:57:37 +08:00
|
|
|
static inline u64 irq_time_read(int cpu)
|
|
|
|
{
|
2016-09-26 08:29:20 +08:00
|
|
|
struct irqtime *irqtime = &per_cpu(cpu_irqtime, cpu);
|
|
|
|
unsigned int seq;
|
|
|
|
u64 total;
|
2012-06-16 21:57:37 +08:00
|
|
|
|
|
|
|
do {
|
2016-09-26 08:29:20 +08:00
|
|
|
seq = __u64_stats_fetch_begin(&irqtime->sync);
|
2017-04-25 22:10:48 +08:00
|
|
|
total = irqtime->total;
|
2016-09-26 08:29:20 +08:00
|
|
|
} while (__u64_stats_fetch_retry(&irqtime->sync, seq));
|
2012-06-16 21:57:37 +08:00
|
|
|
|
2016-09-26 08:29:20 +08:00
|
|
|
return total;
|
2012-06-16 21:57:37 +08:00
|
|
|
}
|
|
|
|
#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
|
2016-03-11 03:44:47 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
2019-03-21 08:34:23 +08:00
|
|
|
DECLARE_PER_CPU(struct update_util_data __rcu *, cpufreq_update_util_data);
|
2016-03-11 03:44:47 +08:00
|
|
|
|
|
|
|
/**
|
|
|
|
* cpufreq_update_util - Take a note about CPU utilization changes.
|
2016-08-10 09:11:17 +08:00
|
|
|
* @rq: Runqueue to carry out the update for.
|
2016-08-17 04:14:55 +08:00
|
|
|
* @flags: Update reason flags.
|
2016-03-11 03:44:47 +08:00
|
|
|
*
|
2016-08-17 04:14:55 +08:00
|
|
|
* This function is called by the scheduler on the CPU whose utilization is
|
|
|
|
* being updated.
|
2016-03-11 03:44:47 +08:00
|
|
|
*
|
|
|
|
* It can only be called from RCU-sched read-side critical sections.
|
|
|
|
*
|
|
|
|
* The way cpufreq is currently arranged requires it to evaluate the CPU
|
|
|
|
* performance state (frequency/voltage) on a regular basis to prevent it from
|
|
|
|
* being stuck in a completely inadequate performance level for too long.
|
2017-12-04 18:23:19 +08:00
|
|
|
* That is not guaranteed to happen if the updates are only triggered from CFS
|
|
|
|
* and DL, though, because they may not be coming in if only RT tasks are
|
|
|
|
* active all the time (or there are RT tasks only).
|
2016-03-11 03:44:47 +08:00
|
|
|
*
|
2017-12-04 18:23:19 +08:00
|
|
|
* As a workaround for that issue, this function is called periodically by the
|
|
|
|
* RT sched class to trigger extra cpufreq updates to prevent it from stalling,
|
2016-03-11 03:44:47 +08:00
|
|
|
* but that really is a band-aid. Going forward it should be replaced with
|
2017-12-04 18:23:19 +08:00
|
|
|
* solutions targeted more specifically at RT tasks.
|
2016-03-11 03:44:47 +08:00
|
|
|
*/
|
2016-08-10 09:11:17 +08:00
|
|
|
static inline void cpufreq_update_util(struct rq *rq, unsigned int flags)
|
2016-03-11 03:44:47 +08:00
|
|
|
{
|
2016-08-17 04:14:55 +08:00
|
|
|
struct update_util_data *data;
|
|
|
|
|
sched: cpufreq: Allow remote cpufreq callbacks
With Android UI and benchmarks the latency of cpufreq response to
certain scheduling events can become very critical. Currently, callbacks
into cpufreq governors are only made from the scheduler if the target
CPU of the event is the same as the current CPU. This means there are
certain situations where a target CPU may not run the cpufreq governor
for some time.
One testcase to show this behavior is where a task starts running on
CPU0, then a new task is also spawned on CPU0 by a task on CPU1. If the
system is configured such that the new tasks should receive maximum
demand initially, this should result in CPU0 increasing frequency
immediately. But because of the above mentioned limitation though, this
does not occur.
This patch updates the scheduler core to call the cpufreq callbacks for
remote CPUs as well.
The schedutil, ondemand and conservative governors are updated to
process cpufreq utilization update hooks called for remote CPUs where
the remote CPU is managed by the cpufreq policy of the local CPU.
The intel_pstate driver is updated to always reject remote callbacks.
This is tested with couple of usecases (Android: hackbench, recentfling,
galleryfling, vellamo, Ubuntu: hackbench) on ARM hikey board (64 bit
octa-core, single policy). Only galleryfling showed minor improvements,
while others didn't had much deviation.
The reason being that this patch only targets a corner case, where
following are required to be true to improve performance and that
doesn't happen too often with these tests:
- Task is migrated to another CPU.
- The task has high demand, and should take the target CPU to higher
OPPs.
- And the target CPU doesn't call into the cpufreq governor until the
next tick.
Based on initial work from Steve Muckle.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-28 14:46:38 +08:00
|
|
|
data = rcu_dereference_sched(*per_cpu_ptr(&cpufreq_update_util_data,
|
|
|
|
cpu_of(rq)));
|
2016-08-17 04:14:55 +08:00
|
|
|
if (data)
|
2016-08-10 09:11:17 +08:00
|
|
|
data->func(data, rq_clock(rq), flags);
|
|
|
|
}
|
2016-03-11 03:44:47 +08:00
|
|
|
#else
|
2016-08-10 09:11:17 +08:00
|
|
|
static inline void cpufreq_update_util(struct rq *rq, unsigned int flags) {}
|
2016-03-11 03:44:47 +08:00
|
|
|
#endif /* CONFIG_CPU_FREQ */
|
2016-03-25 00:42:50 +08:00
|
|
|
|
2016-04-02 07:09:12 +08:00
|
|
|
#ifdef arch_scale_freq_capacity
|
sched: Clean up and harmonize the coding style of the scheduler code base
A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:
- fix speling in comments,
- use curly braces for multi-line statements,
- remove unnecessary parentheses from integer literals,
- capitalize consistently,
- remove stray newlines,
- add comments where necessary,
- remove invalid/unnecessary comments,
- align structure definitions and other data types vertically,
- add missing newlines for increased readability,
- fix vertical tabulation where it's misaligned,
- harmonize preprocessor conditional block labeling
and vertical alignment,
- remove line-breaks where they uglify the code,
- add newline after local variable definitions,
No change in functionality:
md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-03 21:01:12 +08:00
|
|
|
# ifndef arch_scale_freq_invariant
|
|
|
|
# define arch_scale_freq_invariant() true
|
|
|
|
# endif
|
|
|
|
#else
|
|
|
|
# define arch_scale_freq_invariant() false
|
2016-04-02 07:09:12 +08:00
|
|
|
#endif
|
2017-12-04 18:23:18 +08:00
|
|
|
|
2019-01-23 23:26:54 +08:00
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
static inline unsigned long capacity_orig_of(int cpu)
|
|
|
|
{
|
|
|
|
return cpu_rq(cpu)->cpu_capacity_orig;
|
|
|
|
}
|
|
|
|
|
sched/cpufreq: Prepare schedutil for Energy Aware Scheduling
Schedutil requests frequency by aggregating utilization signals from
the scheduler (CFS, RT, DL, IRQ) and applying a 25% margin on top of
them. Since Energy Aware Scheduling (EAS) needs to be able to predict
the frequency requests, it needs to forecast the decisions made by the
governor.
In order to prepare the introduction of EAS, introduce
schedutil_freq_util() to centralize the aforementioned signal
aggregation and make it available to both schedutil and EAS. Since
frequency selection and energy estimation still need to deal with RT and
DL signals slightly differently, schedutil_freq_util() is called with a
different 'type' parameter in those two contexts, and returns an
aggregated utilization signal accordingly. While at it, introduce the
map_util_freq() function which is designed to make schedutil's 25%
margin usable easily for both sugov and EAS.
As EAS will be able to predict schedutil's frequency requests more
accurately than any other governor by design, it'd be sensible to make
sure EAS cannot be used without schedutil. This will be done later, once
EAS has actually been introduced.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: rjw@rjwysocki.net
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-3-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03 17:56:15 +08:00
|
|
|
/**
|
2020-12-08 12:16:56 +08:00
|
|
|
* enum cpu_util_type - CPU utilization type
|
sched/cpufreq: Prepare schedutil for Energy Aware Scheduling
Schedutil requests frequency by aggregating utilization signals from
the scheduler (CFS, RT, DL, IRQ) and applying a 25% margin on top of
them. Since Energy Aware Scheduling (EAS) needs to be able to predict
the frequency requests, it needs to forecast the decisions made by the
governor.
In order to prepare the introduction of EAS, introduce
schedutil_freq_util() to centralize the aforementioned signal
aggregation and make it available to both schedutil and EAS. Since
frequency selection and energy estimation still need to deal with RT and
DL signals slightly differently, schedutil_freq_util() is called with a
different 'type' parameter in those two contexts, and returns an
aggregated utilization signal accordingly. While at it, introduce the
map_util_freq() function which is designed to make schedutil's 25%
margin usable easily for both sugov and EAS.
As EAS will be able to predict schedutil's frequency requests more
accurately than any other governor by design, it'd be sensible to make
sure EAS cannot be used without schedutil. This will be done later, once
EAS has actually been introduced.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: rjw@rjwysocki.net
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-3-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03 17:56:15 +08:00
|
|
|
* @FREQUENCY_UTIL: Utilization used to select frequency
|
|
|
|
* @ENERGY_UTIL: Utilization used during energy calculation
|
|
|
|
*
|
|
|
|
* The utilization signals of all scheduling classes (CFS/RT/DL) and IRQ time
|
|
|
|
* need to be aggregated differently depending on the usage made of them. This
|
2020-12-08 12:16:56 +08:00
|
|
|
* enum is used within effective_cpu_util() to differentiate the types of
|
sched/cpufreq: Prepare schedutil for Energy Aware Scheduling
Schedutil requests frequency by aggregating utilization signals from
the scheduler (CFS, RT, DL, IRQ) and applying a 25% margin on top of
them. Since Energy Aware Scheduling (EAS) needs to be able to predict
the frequency requests, it needs to forecast the decisions made by the
governor.
In order to prepare the introduction of EAS, introduce
schedutil_freq_util() to centralize the aforementioned signal
aggregation and make it available to both schedutil and EAS. Since
frequency selection and energy estimation still need to deal with RT and
DL signals slightly differently, schedutil_freq_util() is called with a
different 'type' parameter in those two contexts, and returns an
aggregated utilization signal accordingly. While at it, introduce the
map_util_freq() function which is designed to make schedutil's 25%
margin usable easily for both sugov and EAS.
As EAS will be able to predict schedutil's frequency requests more
accurately than any other governor by design, it'd be sensible to make
sure EAS cannot be used without schedutil. This will be done later, once
EAS has actually been introduced.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: rjw@rjwysocki.net
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-3-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03 17:56:15 +08:00
|
|
|
* utilization expected by the callers, and adjust the aggregation accordingly.
|
|
|
|
*/
|
2020-12-08 12:16:56 +08:00
|
|
|
enum cpu_util_type {
|
sched/cpufreq: Prepare schedutil for Energy Aware Scheduling
Schedutil requests frequency by aggregating utilization signals from
the scheduler (CFS, RT, DL, IRQ) and applying a 25% margin on top of
them. Since Energy Aware Scheduling (EAS) needs to be able to predict
the frequency requests, it needs to forecast the decisions made by the
governor.
In order to prepare the introduction of EAS, introduce
schedutil_freq_util() to centralize the aforementioned signal
aggregation and make it available to both schedutil and EAS. Since
frequency selection and energy estimation still need to deal with RT and
DL signals slightly differently, schedutil_freq_util() is called with a
different 'type' parameter in those two contexts, and returns an
aggregated utilization signal accordingly. While at it, introduce the
map_util_freq() function which is designed to make schedutil's 25%
margin usable easily for both sugov and EAS.
As EAS will be able to predict schedutil's frequency requests more
accurately than any other governor by design, it'd be sensible to make
sure EAS cannot be used without schedutil. This will be done later, once
EAS has actually been introduced.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: rjw@rjwysocki.net
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-3-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03 17:56:15 +08:00
|
|
|
FREQUENCY_UTIL,
|
|
|
|
ENERGY_UTIL,
|
|
|
|
};
|
|
|
|
|
2020-12-08 12:16:56 +08:00
|
|
|
unsigned long effective_cpu_util(int cpu, unsigned long util_cfs,
|
|
|
|
unsigned long max, enum cpu_util_type type,
|
2019-06-21 16:42:12 +08:00
|
|
|
struct task_struct *p);
|
sched/cpufreq: Prepare schedutil for Energy Aware Scheduling
Schedutil requests frequency by aggregating utilization signals from
the scheduler (CFS, RT, DL, IRQ) and applying a 25% margin on top of
them. Since Energy Aware Scheduling (EAS) needs to be able to predict
the frequency requests, it needs to forecast the decisions made by the
governor.
In order to prepare the introduction of EAS, introduce
schedutil_freq_util() to centralize the aforementioned signal
aggregation and make it available to both schedutil and EAS. Since
frequency selection and energy estimation still need to deal with RT and
DL signals slightly differently, schedutil_freq_util() is called with a
different 'type' parameter in those two contexts, and returns an
aggregated utilization signal accordingly. While at it, introduce the
map_util_freq() function which is designed to make schedutil's 25%
margin usable easily for both sugov and EAS.
As EAS will be able to predict schedutil's frequency requests more
accurately than any other governor by design, it'd be sensible to make
sure EAS cannot be used without schedutil. This will be done later, once
EAS has actually been introduced.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: rjw@rjwysocki.net
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-3-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03 17:56:15 +08:00
|
|
|
|
2018-06-28 23:45:08 +08:00
|
|
|
static inline unsigned long cpu_bw_dl(struct rq *rq)
|
2017-12-04 18:23:18 +08:00
|
|
|
{
|
|
|
|
return (rq->dl.running_bw * SCHED_CAPACITY_SCALE) >> BW_SHIFT;
|
|
|
|
}
|
|
|
|
|
2018-06-28 23:45:08 +08:00
|
|
|
static inline unsigned long cpu_util_dl(struct rq *rq)
|
|
|
|
{
|
|
|
|
return READ_ONCE(rq->avg_dl.util_avg);
|
|
|
|
}
|
|
|
|
|
2021-11-19 00:42:40 +08:00
|
|
|
/**
|
|
|
|
* cpu_util_cfs() - Estimates the amount of CPU capacity used by CFS tasks.
|
|
|
|
* @cpu: the CPU to get the utilization for.
|
|
|
|
*
|
|
|
|
* The unit of the return value must be the same as the one of CPU capacity
|
|
|
|
* so that CPU utilization can be compared with CPU capacity.
|
|
|
|
*
|
|
|
|
* CPU utilization is the sum of running time of runnable tasks plus the
|
|
|
|
* recent utilization of currently non-runnable tasks on that CPU.
|
|
|
|
* It represents the amount of CPU capacity currently used by CFS tasks in
|
|
|
|
* the range [0..max CPU capacity] with max CPU capacity being the CPU
|
|
|
|
* capacity at f_max.
|
|
|
|
*
|
|
|
|
* The estimated CPU utilization is defined as the maximum between CPU
|
|
|
|
* utilization and sum of the estimated utilization of the currently
|
|
|
|
* runnable tasks on that CPU. It preserves a utilization "snapshot" of
|
|
|
|
* previously-executed tasks, which helps better deduce how busy a CPU will
|
|
|
|
* be when a long-sleeping task wakes up. The contribution to CPU utilization
|
|
|
|
* of such a task would be significantly decayed at this point of time.
|
|
|
|
*
|
|
|
|
* CPU utilization can be higher than the current CPU capacity
|
|
|
|
* (f_curr/f_max * max CPU capacity) or even the max CPU capacity because
|
|
|
|
* of rounding errors as well as task migrations or wakeups of new tasks.
|
|
|
|
* CPU utilization has to be capped to fit into the [0..max CPU capacity]
|
|
|
|
* range. Otherwise a group of CPUs (CPU0 util = 121% + CPU1 util = 80%)
|
|
|
|
* could be seen as over-utilized even though CPU1 has 20% of spare CPU
|
|
|
|
* capacity. CPU utilization is allowed to overshoot current CPU capacity
|
|
|
|
* though since this is useful for predicting the CPU capacity required
|
|
|
|
* after task migrations (scheduler-driven DVFS).
|
|
|
|
*
|
|
|
|
* Return: (Estimated) utilization for the specified CPU.
|
|
|
|
*/
|
|
|
|
static inline unsigned long cpu_util_cfs(int cpu)
|
2017-12-04 18:23:18 +08:00
|
|
|
{
|
2021-11-19 00:42:40 +08:00
|
|
|
struct cfs_rq *cfs_rq;
|
|
|
|
unsigned long util;
|
|
|
|
|
|
|
|
cfs_rq = &cpu_rq(cpu)->cfs;
|
|
|
|
util = READ_ONCE(cfs_rq->avg.util_avg);
|
sched/cpufreq/schedutil: Use util_est for OPP selection
When schedutil looks at the CPU utilization, the current PELT value for
that CPU is returned straight away. In certain scenarios this can have
undesired side effects and delays on frequency selection.
For example, since the task utilization is decayed at wakeup time, a
long sleeping big task newly enqueued does not add immediately a
significant contribution to the target CPU. This introduces some latency
before schedutil will be able to detect the best frequency required by
that task.
Moreover, the PELT signal build-up time is a function of the current
frequency, because of the scale invariant load tracking support. Thus,
starting from a lower frequency, the utilization build-up time will
increase even more and further delays the selection of the actual
frequency which better serves the task requirements.
In order to reduce these kind of latencies, we integrate the usage
of the CPU's estimated utilization in the sugov_get_util function.
This allows to properly consider the expected utilization of a CPU which,
for example, has just got a big task running after a long sleep period.
Ultimately this allows to select the best frequency to run a task
right after its wake-up.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Muckle <smuckle@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@android.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20180309095245.11071-4-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09 17:52:44 +08:00
|
|
|
|
|
|
|
if (sched_feat(UTIL_EST)) {
|
|
|
|
util = max_t(unsigned long, util,
|
2021-11-19 00:42:40 +08:00
|
|
|
READ_ONCE(cfs_rq->avg.util_est.enqueued));
|
sched/cpufreq/schedutil: Use util_est for OPP selection
When schedutil looks at the CPU utilization, the current PELT value for
that CPU is returned straight away. In certain scenarios this can have
undesired side effects and delays on frequency selection.
For example, since the task utilization is decayed at wakeup time, a
long sleeping big task newly enqueued does not add immediately a
significant contribution to the target CPU. This introduces some latency
before schedutil will be able to detect the best frequency required by
that task.
Moreover, the PELT signal build-up time is a function of the current
frequency, because of the scale invariant load tracking support. Thus,
starting from a lower frequency, the utilization build-up time will
increase even more and further delays the selection of the actual
frequency which better serves the task requirements.
In order to reduce these kind of latencies, we integrate the usage
of the CPU's estimated utilization in the sugov_get_util function.
This allows to properly consider the expected utilization of a CPU which,
for example, has just got a big task running after a long sleep period.
Ultimately this allows to select the best frequency to run a task
right after its wake-up.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Muckle <smuckle@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@android.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20180309095245.11071-4-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09 17:52:44 +08:00
|
|
|
}
|
|
|
|
|
2021-11-19 00:42:40 +08:00
|
|
|
return min(util, capacity_orig_of(cpu));
|
2017-12-04 18:23:18 +08:00
|
|
|
}
|
2018-06-28 23:45:05 +08:00
|
|
|
|
|
|
|
static inline unsigned long cpu_util_rt(struct rq *rq)
|
|
|
|
{
|
2018-06-28 23:45:11 +08:00
|
|
|
return READ_ONCE(rq->avg_rt.util_avg);
|
2018-06-28 23:45:05 +08:00
|
|
|
}
|
2020-12-08 12:16:55 +08:00
|
|
|
#endif
|
2018-06-28 23:45:10 +08:00
|
|
|
|
2021-12-17 06:53:19 +08:00
|
|
|
#ifdef CONFIG_UCLAMP_TASK
|
|
|
|
unsigned long uclamp_eff_value(struct task_struct *p, enum uclamp_id clamp_id);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* uclamp_rq_util_with - clamp @util with @rq and @p effective uclamp values.
|
|
|
|
* @rq: The rq to clamp against. Must not be NULL.
|
|
|
|
* @util: The util value to clamp.
|
|
|
|
* @p: The task to clamp against. Can be NULL if you want to clamp
|
|
|
|
* against @rq only.
|
|
|
|
*
|
|
|
|
* Clamps the passed @util to the max(@rq, @p) effective uclamp values.
|
|
|
|
*
|
|
|
|
* If sched_uclamp_used static key is disabled, then just return the util
|
|
|
|
* without any clamping since uclamp aggregation at the rq level in the fast
|
|
|
|
* path is disabled, rendering this operation a NOP.
|
|
|
|
*
|
|
|
|
* Use uclamp_eff_value() if you don't care about uclamp values at rq level. It
|
|
|
|
* will return the correct effective uclamp value of the task even if the
|
|
|
|
* static key is disabled.
|
|
|
|
*/
|
|
|
|
static __always_inline
|
|
|
|
unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util,
|
|
|
|
struct task_struct *p)
|
|
|
|
{
|
|
|
|
unsigned long min_util = 0;
|
|
|
|
unsigned long max_util = 0;
|
|
|
|
|
|
|
|
if (!static_branch_likely(&sched_uclamp_used))
|
|
|
|
return util;
|
|
|
|
|
|
|
|
if (p) {
|
|
|
|
min_util = uclamp_eff_value(p, UCLAMP_MIN);
|
|
|
|
max_util = uclamp_eff_value(p, UCLAMP_MAX);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Ignore last runnable task's max clamp, as this task will
|
|
|
|
* reset it. Similarly, no need to read the rq's min clamp.
|
|
|
|
*/
|
|
|
|
if (rq->uclamp_flags & UCLAMP_FLAG_IDLE)
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
min_util = max_t(unsigned long, min_util, READ_ONCE(rq->uclamp[UCLAMP_MIN].value));
|
|
|
|
max_util = max_t(unsigned long, max_util, READ_ONCE(rq->uclamp[UCLAMP_MAX].value));
|
|
|
|
out:
|
|
|
|
/*
|
|
|
|
* Since CPU's {min,max}_util clamps are MAX aggregated considering
|
|
|
|
* RUNNABLE tasks with _different_ clamps, we can end up with an
|
|
|
|
* inversion. Fix it now when the clamps are applied.
|
|
|
|
*/
|
|
|
|
if (unlikely(min_util >= max_util))
|
|
|
|
return min_util;
|
|
|
|
|
|
|
|
return clamp(util, min_util, max_util);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Is the rq being capped/throttled by uclamp_max? */
|
|
|
|
static inline bool uclamp_rq_is_capped(struct rq *rq)
|
|
|
|
{
|
|
|
|
unsigned long rq_util;
|
|
|
|
unsigned long max_util;
|
|
|
|
|
|
|
|
if (!static_branch_likely(&sched_uclamp_used))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
rq_util = cpu_util_cfs(cpu_of(rq)) + cpu_util_rt(rq);
|
|
|
|
max_util = READ_ONCE(rq->uclamp[UCLAMP_MAX].value);
|
|
|
|
|
|
|
|
return max_util != SCHED_CAPACITY_SCALE && rq_util >= max_util;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* When uclamp is compiled in, the aggregation at rq level is 'turned off'
|
|
|
|
* by default in the fast path and only gets turned on once userspace performs
|
|
|
|
* an operation that requires it.
|
|
|
|
*
|
|
|
|
* Returns true if userspace opted-in to use uclamp and aggregation at rq level
|
|
|
|
* hence is active.
|
|
|
|
*/
|
|
|
|
static inline bool uclamp_is_used(void)
|
|
|
|
{
|
|
|
|
return static_branch_likely(&sched_uclamp_used);
|
|
|
|
}
|
|
|
|
#else /* CONFIG_UCLAMP_TASK */
|
|
|
|
static inline
|
|
|
|
unsigned long uclamp_rq_util_with(struct rq *rq, unsigned long util,
|
|
|
|
struct task_struct *p)
|
|
|
|
{
|
|
|
|
return util;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool uclamp_rq_is_capped(struct rq *rq) { return false; }
|
|
|
|
|
|
|
|
static inline bool uclamp_is_used(void)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_UCLAMP_TASK */
|
|
|
|
|
2018-09-25 17:17:42 +08:00
|
|
|
#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
|
2018-06-28 23:45:10 +08:00
|
|
|
static inline unsigned long cpu_util_irq(struct rq *rq)
|
|
|
|
{
|
|
|
|
return rq->avg_irq.util_avg;
|
|
|
|
}
|
2018-07-19 20:00:06 +08:00
|
|
|
|
|
|
|
static inline
|
|
|
|
unsigned long scale_irq_capacity(unsigned long util, unsigned long irq, unsigned long max)
|
|
|
|
{
|
|
|
|
util *= (max - irq);
|
|
|
|
util /= max;
|
|
|
|
|
|
|
|
return util;
|
|
|
|
|
|
|
|
}
|
2018-06-28 23:45:10 +08:00
|
|
|
#else
|
|
|
|
static inline unsigned long cpu_util_irq(struct rq *rq)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-07-19 20:00:06 +08:00
|
|
|
static inline
|
|
|
|
unsigned long scale_irq_capacity(unsigned long util, unsigned long irq, unsigned long max)
|
|
|
|
{
|
|
|
|
return util;
|
|
|
|
}
|
2017-12-04 18:23:20 +08:00
|
|
|
#endif
|
2018-12-03 17:56:18 +08:00
|
|
|
|
2018-12-03 17:56:21 +08:00
|
|
|
#if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL)
|
2018-12-05 18:23:56 +08:00
|
|
|
|
2018-12-03 17:56:18 +08:00
|
|
|
#define perf_domain_span(pd) (to_cpumask(((pd)->em_pd->cpus)))
|
2018-12-05 18:23:56 +08:00
|
|
|
|
|
|
|
DECLARE_STATIC_KEY_FALSE(sched_energy_present);
|
|
|
|
|
|
|
|
static inline bool sched_energy_enabled(void)
|
|
|
|
{
|
|
|
|
return static_branch_unlikely(&sched_energy_present);
|
|
|
|
}
|
|
|
|
|
|
|
|
#else /* ! (CONFIG_ENERGY_MODEL && CONFIG_CPU_FREQ_GOV_SCHEDUTIL) */
|
|
|
|
|
2018-12-03 17:56:18 +08:00
|
|
|
#define perf_domain_span(pd) NULL
|
2018-12-05 18:23:56 +08:00
|
|
|
static inline bool sched_energy_enabled(void) { return false; }
|
2018-12-03 17:56:22 +08:00
|
|
|
|
2018-12-05 18:23:56 +08:00
|
|
|
#endif /* CONFIG_ENERGY_MODEL && CONFIG_CPU_FREQ_GOV_SCHEDUTIL */
|
2019-09-20 01:37:02 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_MEMBARRIER
|
|
|
|
/*
|
|
|
|
* The scheduler provides memory barriers required by membarrier between:
|
|
|
|
* - prior user-space memory accesses and store to rq->membarrier_state,
|
|
|
|
* - store to rq->membarrier_state and following user-space memory accesses.
|
|
|
|
* In the same way it provides those guarantees around store to rq->curr.
|
|
|
|
*/
|
|
|
|
static inline void membarrier_switch_mm(struct rq *rq,
|
|
|
|
struct mm_struct *prev_mm,
|
|
|
|
struct mm_struct *next_mm)
|
|
|
|
{
|
|
|
|
int membarrier_state;
|
|
|
|
|
|
|
|
if (prev_mm == next_mm)
|
|
|
|
return;
|
|
|
|
|
|
|
|
membarrier_state = atomic_read(&next_mm->membarrier_state);
|
|
|
|
if (READ_ONCE(rq->membarrier_state) == membarrier_state)
|
|
|
|
return;
|
|
|
|
|
|
|
|
WRITE_ONCE(rq->membarrier_state, membarrier_state);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void membarrier_switch_mm(struct rq *rq,
|
|
|
|
struct mm_struct *prev_mm,
|
|
|
|
struct mm_struct *next_mm)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
The following XFS commit:
8ab39f11d974 ("xfs: prevent CIL push holdoff in log recovery")
changed the logic from using bound workqueues to using unbound
workqueues. Functionally this makes sense but it was observed at the
time that the dbench performance dropped quite a lot and CPU migrations
were increased.
The current pattern of the task migration is straight-forward. With XFS,
an IO issuer delegates work to xlog_cil_push_work ()on an unbound kworker.
This runs on a nearby CPU and on completion, dbench wakes up on its old CPU
as it is still idle and no migration occurs. dbench then queues the real
IO on the blk_mq_requeue_work() work item which runs on a bound kworker
which is forced to run on the same CPU as dbench. When IO completes,
the bound kworker wakes dbench but as the kworker is a bound but,
real task, the CPU is not considered idle and dbench gets migrated by
select_idle_sibling() to a new CPU. dbench may ping-pong between two CPUs
for a while but ultimately it starts a round-robin of all CPUs sharing
the same LLC. High-frequency migration on each IO completion has poor
performance overall. It has negative implications both in commication
costs and power management. mpstat confirmed that at low thread counts
that all CPUs sharing an LLC has low level of activity.
Note that even if the CIL patch was reverted, there still would
be migrations but the impact is less noticeable. It turns out that
individually the scheduler, XFS, blk-mq and workqueues all made sensible
decisions but in combination, the overall effect was sub-optimal.
This patch special cases the IO issue/completion pattern and allows
a bound kworker waker and a task wakee to stack on the same CPU if
there is a strong chance they are directly related. The expectation
is that the kworker is likely going back to sleep shortly. This is not
guaranteed as the IO could be queued asynchronously but there is a very
strong relationship between the task and kworker in this case that would
justify stacking on the same CPU instead of migrating. There should be
few concerns about kworker starvation given that the special casing is
only when the kworker is the waker.
DBench on XFS
MMTests config: io-dbench4-async modified to run on a fresh XFS filesystem
UMA machine with 8 cores sharing LLC
5.5.0-rc7 5.5.0-rc7
tipsched-20200124 kworkerstack
Amean 1 22.63 ( 0.00%) 20.54 * 9.23%*
Amean 2 25.56 ( 0.00%) 23.40 * 8.44%*
Amean 4 28.63 ( 0.00%) 27.85 * 2.70%*
Amean 8 37.66 ( 0.00%) 37.68 ( -0.05%)
Amean 64 469.47 ( 0.00%) 468.26 ( 0.26%)
Stddev 1 1.00 ( 0.00%) 0.72 ( 28.12%)
Stddev 2 1.62 ( 0.00%) 1.97 ( -21.54%)
Stddev 4 2.53 ( 0.00%) 3.58 ( -41.19%)
Stddev 8 5.30 ( 0.00%) 5.20 ( 1.92%)
Stddev 64 86.36 ( 0.00%) 94.53 ( -9.46%)
NUMA machine, 48 CPUs total, 24 CPUs share cache
5.5.0-rc7 5.5.0-rc7
tipsched-20200124 kworkerstack-v1r2
Amean 1 58.69 ( 0.00%) 30.21 * 48.53%*
Amean 2 60.90 ( 0.00%) 35.29 * 42.05%*
Amean 4 66.77 ( 0.00%) 46.55 * 30.28%*
Amean 8 81.41 ( 0.00%) 68.46 * 15.91%*
Amean 16 113.29 ( 0.00%) 107.79 * 4.85%*
Amean 32 199.10 ( 0.00%) 198.22 * 0.44%*
Amean 64 478.99 ( 0.00%) 477.06 * 0.40%*
Amean 128 1345.26 ( 0.00%) 1372.64 * -2.04%*
Stddev 1 2.64 ( 0.00%) 4.17 ( -58.08%)
Stddev 2 4.35 ( 0.00%) 5.38 ( -23.73%)
Stddev 4 6.77 ( 0.00%) 6.56 ( 3.00%)
Stddev 8 11.61 ( 0.00%) 10.91 ( 6.04%)
Stddev 16 18.63 ( 0.00%) 19.19 ( -3.01%)
Stddev 32 38.71 ( 0.00%) 38.30 ( 1.06%)
Stddev 64 100.28 ( 0.00%) 91.24 ( 9.02%)
Stddev 128 186.87 ( 0.00%) 160.34 ( 14.20%)
Dbench has been modified to report the time to complete a single "load
file". This is a more meaningful metric for dbench that a throughput
metric as the benchmark makes many different system calls that are not
throughput-related
Patch shows a 9.23% and 48.53% reduction in the time to process a load
file with the difference partially explained by the number of CPUs sharing
a LLC. In a separate run, task migrations were almost eliminated by the
patch for low client counts. In case people have issue with the metric
used for the benchmark, this is a comparison of the throughputs as
reported by dbench on the NUMA machine.
dbench4 Throughput (misleading but traditional)
5.5.0-rc7 5.5.0-rc7
tipsched-20200124 kworkerstack-v1r2
Hmean 1 321.41 ( 0.00%) 617.82 * 92.22%*
Hmean 2 622.87 ( 0.00%) 1066.80 * 71.27%*
Hmean 4 1134.56 ( 0.00%) 1623.74 * 43.12%*
Hmean 8 1869.96 ( 0.00%) 2212.67 * 18.33%*
Hmean 16 2673.11 ( 0.00%) 2806.13 * 4.98%*
Hmean 32 3032.74 ( 0.00%) 3039.54 ( 0.22%)
Hmean 64 2514.25 ( 0.00%) 2498.96 * -0.61%*
Hmean 128 1778.49 ( 0.00%) 1746.05 * -1.82%*
Note that this is somewhat specific to XFS and ext4 shows no performance
difference as it does not rely on kworkers in the same way. No major
problem was observed running other workloads on different machines although
not all tests have completed yet.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200128154006.GD3466@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-28 23:40:06 +08:00
|
|
|
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
static inline bool is_per_cpu_kthread(struct task_struct *p)
|
|
|
|
{
|
|
|
|
if (!(p->flags & PF_KTHREAD))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (p->nr_cpus_allowed != 1)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
#endif
|
2020-03-21 19:25:59 +08:00
|
|
|
|
2021-03-25 19:21:38 +08:00
|
|
|
extern void swake_up_all_locked(struct swait_queue_head *q);
|
|
|
|
extern void __prepare_to_swait(struct swait_queue_head *q, struct swait_queue *wait);
|
|
|
|
|
|
|
|
#ifdef CONFIG_PREEMPT_DYNAMIC
|
|
|
|
extern int preempt_dynamic_mode;
|
|
|
|
extern int sched_dynamic_mode(const char *str);
|
|
|
|
extern void sched_dynamic_update(int mode);
|
|
|
|
#endif
|
|
|
|
|
2022-02-22 21:50:43 +08:00
|
|
|
#endif /* _KERNEL_SCHED_SCHED_H */
|