OpenCloudOS-Kernel/drivers/gpu/drm/i915/i915_drv.c

1230 lines
35 KiB
C
Raw Normal View History

/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
*/
/*
*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <linux/device.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
#include <linux/console.h>
#include <linux/module.h>
#include "drm_crtc_helper.h"
static int i915_modeset __read_mostly = -1;
module_param_named(modeset, i915_modeset, int, 0400);
MODULE_PARM_DESC(modeset,
"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
"1=on, -1=force vga console preference [default])");
unsigned int i915_fbpercrtc __always_unused = 0;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
int i915_panel_ignore_lid __read_mostly = 0;
module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
MODULE_PARM_DESC(panel_ignore_lid,
"Override lid status (0=autodetect [default], 1=lid open, "
"-1=lid closed)");
unsigned int i915_powersave __read_mostly = 1;
module_param_named(powersave, i915_powersave, int, 0600);
MODULE_PARM_DESC(powersave,
"Enable powersavings, fbc, downclocking, etc. (default: true)");
int i915_semaphores __read_mostly = -1;
module_param_named(semaphores, i915_semaphores, int, 0600);
MODULE_PARM_DESC(semaphores,
"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
int i915_enable_rc6 __read_mostly = -1;
module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
MODULE_PARM_DESC(i915_enable_rc6,
"Enable power-saving render C-state 6. "
"Different stages can be selected via bitmask values "
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
"default: -1 (use per-chip default)");
int i915_enable_fbc __read_mostly = -1;
module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
MODULE_PARM_DESC(i915_enable_fbc,
"Enable frame buffer compression for power savings "
"(default: -1 (use per-chip default))");
unsigned int i915_lvds_downclock __read_mostly = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
MODULE_PARM_DESC(lvds_downclock,
"Use panel (LVDS/eDP) downclocking for power savings "
"(default: false)");
int i915_lvds_channel_mode __read_mostly;
module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
MODULE_PARM_DESC(lvds_channel_mode,
"Specify LVDS channel mode "
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
int i915_panel_use_ssc __read_mostly = -1;
module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
MODULE_PARM_DESC(lvds_use_ssc,
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
"(default: auto from VBT)");
int i915_vbt_sdvo_panel_type __read_mostly = -1;
module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
MODULE_PARM_DESC(vbt_sdvo_panel_type,
"Override/Ignore selection of SDVO panel mode in the VBT "
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
static bool i915_try_reset __read_mostly = true;
module_param_named(reset, i915_try_reset, bool, 0600);
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
bool i915_enable_hangcheck __read_mostly = true;
module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
MODULE_PARM_DESC(enable_hangcheck,
"Periodically check GPU activity for detecting hangs. "
"WARNING: Disabling this can cause system wide hangs. "
"(default: true)");
int i915_enable_ppgtt __read_mostly = -1;
module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600);
MODULE_PARM_DESC(i915_enable_ppgtt,
"Enable PPGTT (default: true)");
static struct drm_driver driver;
extern int intel_agp_enabled;
#define INTEL_VGA_DEVICE(id, info) { \
.class = PCI_BASE_CLASS_DISPLAY << 16, \
.class_mask = 0xff0000, \
.vendor = 0x8086, \
.device = id, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
.driver_data = (unsigned long) info }
static const struct intel_device_info intel_i830_info = {
.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_845g_info = {
.gen = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i85x_info = {
.gen = 2, .is_i85x = 1, .is_mobile = 1,
.cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i865g_info = {
.gen = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i915g_info = {
.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i915gm_info = {
.gen = 3, .is_mobile = 1,
.cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_i945g_info = {
.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
};
static const struct intel_device_info intel_i945gm_info = {
.gen = 3, .is_i945gm = 1, .is_mobile = 1,
.has_hotplug = 1, .cursor_needs_physical = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_i965g_info = {
.gen = 4, .is_broadwater = 1,
.has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_i965gm_info = {
.gen = 4, .is_crestline = 1,
.is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
.has_overlay = 1,
.supports_tv = 1,
};
static const struct intel_device_info intel_g33_info = {
.gen = 3, .is_g33 = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_g45_info = {
.gen = 4, .is_g4x = 1, .need_gfx_hws = 1,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_gm45_info = {
.gen = 4, .is_g4x = 1,
.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.supports_tv = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_pineview_info = {
.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
};
static const struct intel_device_info intel_ironlake_d_info = {
.gen = 5,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_ironlake_m_info = {
.gen = 5, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.has_bsd_ring = 1,
};
static const struct intel_device_info intel_sandybridge_d_info = {
.gen = 6,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_sandybridge_m_info = {
.gen = 6, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_ivybridge_d_info = {
.is_ivybridge = 1, .gen = 7,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_ivybridge_m_info = {
.is_ivybridge = 1, .gen = 7, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 0, /* FBC is not enabled on Ivybridge mobile yet */
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_valleyview_m_info = {
.gen = 7, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 0,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.is_valleyview = 1,
};
static const struct intel_device_info intel_valleyview_d_info = {
.gen = 7,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 0,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.is_valleyview = 1,
};
static const struct intel_device_info intel_haswell_d_info = {
.is_haswell = 1, .gen = 7,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_force_wake = 1,
};
static const struct intel_device_info intel_haswell_m_info = {
.is_haswell = 1, .gen = 7, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_force_wake = 1,
};
static const struct pci_device_id pciidlist[] = { /* aka */
INTEL_VGA_DEVICE(0x3577, &intel_i830_info), /* I830_M */
INTEL_VGA_DEVICE(0x2562, &intel_845g_info), /* 845_G */
INTEL_VGA_DEVICE(0x3582, &intel_i85x_info), /* I855_GM */
INTEL_VGA_DEVICE(0x358e, &intel_i85x_info),
INTEL_VGA_DEVICE(0x2572, &intel_i865g_info), /* I865_G */
INTEL_VGA_DEVICE(0x2582, &intel_i915g_info), /* I915_G */
INTEL_VGA_DEVICE(0x258a, &intel_i915g_info), /* E7221_G */
INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info), /* I915_GM */
INTEL_VGA_DEVICE(0x2772, &intel_i945g_info), /* I945_G */
INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info), /* I945_GM */
INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info), /* I945_GME */
INTEL_VGA_DEVICE(0x2972, &intel_i965g_info), /* I946_GZ */
INTEL_VGA_DEVICE(0x2982, &intel_i965g_info), /* G35_G */
INTEL_VGA_DEVICE(0x2992, &intel_i965g_info), /* I965_Q */
INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info), /* I965_G */
INTEL_VGA_DEVICE(0x29b2, &intel_g33_info), /* Q35_G */
INTEL_VGA_DEVICE(0x29c2, &intel_g33_info), /* G33_G */
INTEL_VGA_DEVICE(0x29d2, &intel_g33_info), /* Q33_G */
INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info), /* I965_GM */
INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info), /* I965_GME */
INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info), /* GM45_G */
INTEL_VGA_DEVICE(0x2e02, &intel_g45_info), /* IGD_E_G */
INTEL_VGA_DEVICE(0x2e12, &intel_g45_info), /* Q45_G */
INTEL_VGA_DEVICE(0x2e22, &intel_g45_info), /* G45_G */
INTEL_VGA_DEVICE(0x2e32, &intel_g45_info), /* G41_G */
INTEL_VGA_DEVICE(0x2e42, &intel_g45_info), /* B43_G */
INTEL_VGA_DEVICE(0x2e92, &intel_g45_info), /* B43_G.1 */
INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
INTEL_VGA_DEVICE(0x0102, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0112, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0122, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0106, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x0116, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x0126, &intel_sandybridge_m_info),
INTEL_VGA_DEVICE(0x010A, &intel_sandybridge_d_info),
INTEL_VGA_DEVICE(0x0156, &intel_ivybridge_m_info), /* GT1 mobile */
INTEL_VGA_DEVICE(0x0166, &intel_ivybridge_m_info), /* GT2 mobile */
INTEL_VGA_DEVICE(0x0152, &intel_ivybridge_d_info), /* GT1 desktop */
INTEL_VGA_DEVICE(0x0162, &intel_ivybridge_d_info), /* GT2 desktop */
INTEL_VGA_DEVICE(0x015a, &intel_ivybridge_d_info), /* GT1 server */
INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */
INTEL_VGA_DEVICE(0x0402, &intel_haswell_d_info), /* GT1 desktop */
INTEL_VGA_DEVICE(0x0412, &intel_haswell_d_info), /* GT2 desktop */
INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT2 desktop */
INTEL_VGA_DEVICE(0x040a, &intel_haswell_d_info), /* GT1 server */
INTEL_VGA_DEVICE(0x041a, &intel_haswell_d_info), /* GT2 server */
INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT2 server */
INTEL_VGA_DEVICE(0x0406, &intel_haswell_m_info), /* GT1 mobile */
INTEL_VGA_DEVICE(0x0416, &intel_haswell_m_info), /* GT2 mobile */
INTEL_VGA_DEVICE(0x0426, &intel_haswell_m_info), /* GT2 mobile */
INTEL_VGA_DEVICE(0x0C02, &intel_haswell_d_info), /* SDV GT1 desktop */
INTEL_VGA_DEVICE(0x0C12, &intel_haswell_d_info), /* SDV GT2 desktop */
INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT2 desktop */
INTEL_VGA_DEVICE(0x0C0A, &intel_haswell_d_info), /* SDV GT1 server */
INTEL_VGA_DEVICE(0x0C1A, &intel_haswell_d_info), /* SDV GT2 server */
INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT2 server */
INTEL_VGA_DEVICE(0x0C06, &intel_haswell_m_info), /* SDV GT1 mobile */
INTEL_VGA_DEVICE(0x0C16, &intel_haswell_m_info), /* SDV GT2 mobile */
INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT2 mobile */
INTEL_VGA_DEVICE(0x0A02, &intel_haswell_d_info), /* ULT GT1 desktop */
INTEL_VGA_DEVICE(0x0A12, &intel_haswell_d_info), /* ULT GT2 desktop */
INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT2 desktop */
INTEL_VGA_DEVICE(0x0A0A, &intel_haswell_d_info), /* ULT GT1 server */
INTEL_VGA_DEVICE(0x0A1A, &intel_haswell_d_info), /* ULT GT2 server */
INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT2 server */
INTEL_VGA_DEVICE(0x0A06, &intel_haswell_m_info), /* ULT GT1 mobile */
INTEL_VGA_DEVICE(0x0A16, &intel_haswell_m_info), /* ULT GT2 mobile */
INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT2 mobile */
INTEL_VGA_DEVICE(0x0D12, &intel_haswell_d_info), /* CRW GT1 desktop */
INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT2 desktop */
INTEL_VGA_DEVICE(0x0D32, &intel_haswell_d_info), /* CRW GT2 desktop */
INTEL_VGA_DEVICE(0x0D1A, &intel_haswell_d_info), /* CRW GT1 server */
INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT2 server */
INTEL_VGA_DEVICE(0x0D3A, &intel_haswell_d_info), /* CRW GT2 server */
INTEL_VGA_DEVICE(0x0D16, &intel_haswell_m_info), /* CRW GT1 mobile */
INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT2 mobile */
INTEL_VGA_DEVICE(0x0D36, &intel_haswell_m_info), /* CRW GT2 mobile */
INTEL_VGA_DEVICE(0x0f30, &intel_valleyview_m_info),
INTEL_VGA_DEVICE(0x0157, &intel_valleyview_m_info),
INTEL_VGA_DEVICE(0x0155, &intel_valleyview_d_info),
{0, 0, 0}
};
#if defined(CONFIG_DRM_I915_KMS)
MODULE_DEVICE_TABLE(pci, pciidlist);
#endif
#define INTEL_PCH_DEVICE_ID_MASK 0xff00
#define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00
#define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00
#define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00
#define INTEL_PCH_LPT_DEVICE_ID_TYPE 0x8c00
void intel_detect_pch(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct pci_dev *pch;
/*
* The reason to probe ISA bridge instead of Dev31:Fun0 is to
* make graphics device passthrough work easy for VMM, that only
* need to expose ISA bridge to let driver know the real hardware
* underneath. This is a requirement from virtualization team.
*/
pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
if (pch) {
if (pch->vendor == PCI_VENDOR_ID_INTEL) {
int id;
id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_IBX;
dev_priv->num_pch_pll = 2;
DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_CPT;
dev_priv->num_pch_pll = 2;
DRM_DEBUG_KMS("Found CougarPoint PCH\n");
} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
/* PantherPoint is CPT compatible */
dev_priv->pch_type = PCH_CPT;
dev_priv->num_pch_pll = 2;
DRM_DEBUG_KMS("Found PatherPoint PCH\n");
} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_LPT;
dev_priv->num_pch_pll = 0;
DRM_DEBUG_KMS("Found LynxPoint PCH\n");
}
BUG_ON(dev_priv->num_pch_pll > I915_NUM_PLLS);
}
pci_dev_put(pch);
}
}
bool i915_semaphore_is_enabled(struct drm_device *dev)
{
if (INTEL_INFO(dev)->gen < 6)
return 0;
if (i915_semaphores >= 0)
return i915_semaphores;
#ifdef CONFIG_INTEL_IOMMU
/* Enable semaphores on SNB when IO remapping is off */
if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
return false;
#endif
return 1;
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm_kms_helper_poll_disable(dev);
pci_save_state(dev->pdev);
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
int error = i915_gem_idle(dev);
if (error) {
dev_err(&dev->pdev->dev,
"GEM idle failed, resume might fail\n");
return error;
}
drm_irq_uninstall(dev);
}
i915_save_state(dev);
intel_opregion_fini(dev);
/* Modeset on resume, not lid events */
dev_priv->modeset_on_lid = 0;
console_lock();
intel_fbdev_set_suspend(dev, 1);
console_unlock();
return 0;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int i915_suspend(struct drm_device *dev, pm_message_t state)
{
int error;
if (!dev || !dev->dev_private) {
DRM_ERROR("dev: %p\n", dev);
DRM_ERROR("DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
if (state.event == PM_EVENT_PRETHAW)
return 0;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
error = i915_drm_freeze(dev);
if (error)
return error;
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
pci_disable_device(dev->pdev);
pci_set_power_state(dev->pdev, PCI_D3hot);
}
return 0;
}
static int i915_drm_thaw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
}
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
ironlake_init_pch_refclk(dev);
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
intel_modeset_init_hw(dev);
drm/i915: read out the modeset hw state at load and resume time ... instead of resetting a few things and hoping that this will work out. To properly disable the output pipelines at the initial modeset after resume or boot up we need to have an accurate picture of which outputs are enabled and connected to which crtcs. Otherwise we risk disabling things at the wrong time, which can lead to hangs (or at least royally confused panels), both requiring a walk to the reset button to fix. Hence read out the hw state with the freshly introduce get_hw_state functions and then sanitize it afterwards. For a full modeset readout (which would allow us to avoid the initial modeset at boot up) a few things are still missing: - Reading out the mode from the pipe, especially the dotclock computation is quite some fun. - Reading out the parameters for the stolen memory framebuffer and wrapping it up. - Reading out the pch pll connections - luckily the disable code simply bails out if the crtc doesn't have a pch pll attached (even for configurations that would need one). This patch here turned up tons of smelly stuff around resume: We restore tons of register in seemingly random way (well, not quite, but we're not too careful either), which leaves the hw in a rather ill-defined state: E.g. the port registers are sometimes unconditionally restore (lvds, crt), leaving us with an active encoder/connector but no active pipe connected to it. Luckily the hw state sanitizer detects this madness and fixes things up a bit. v2: When checking whether an encoder with active connectors has a crtc wire up to it, check for both the crtc _and_ it's active state. v3: - Extract intel_sanitize_encoder. - Manually disable active encoders without an active pipe. v4: Correclty fix up the pipe<->plane mapping on machines where we switch pipes/planes. Noticed by Chris Wilson, who also provided the fixup. v5: Spelling fix in a comment, noticed by Paulo Zanoni Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-03 02:28:59 +08:00
intel_modeset_setup_hw_state(dev);
drm_mode_config_reset(dev);
drm_irq_install(dev);
/* Resume the modeset for every activated CRTC */
mutex_lock(&dev->mode_config.mutex);
drm_helper_resume_force_mode(dev);
mutex_unlock(&dev->mode_config.mutex);
}
intel_opregion_init(dev);
dev_priv->modeset_on_lid = 0;
console_lock();
intel_fbdev_set_suspend(dev, 0);
console_unlock();
return error;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int i915_resume(struct drm_device *dev)
{
int ret;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
if (pci_enable_device(dev->pdev))
return -EIO;
pci_set_master(dev->pdev);
ret = i915_drm_thaw(dev);
if (ret)
return ret;
drm_kms_helper_poll_enable(dev);
return 0;
}
static int i8xx_do_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (IS_I85X(dev))
return -ENODEV;
I915_WRITE(D_STATE, I915_READ(D_STATE) | DSTATE_GFX_RESET_I830);
POSTING_READ(D_STATE);
if (IS_I830(dev) || IS_845G(dev)) {
I915_WRITE(DEBUG_RESET_I830,
DEBUG_RESET_DISPLAY |
DEBUG_RESET_RENDER |
DEBUG_RESET_FULL);
POSTING_READ(DEBUG_RESET_I830);
msleep(1);
I915_WRITE(DEBUG_RESET_I830, 0);
POSTING_READ(DEBUG_RESET_I830);
}
msleep(1);
I915_WRITE(D_STATE, I915_READ(D_STATE) & ~DSTATE_GFX_RESET_I830);
POSTING_READ(D_STATE);
return 0;
}
static int i965_reset_complete(struct drm_device *dev)
{
u8 gdrst;
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
return (gdrst & GRDOM_RESET_ENABLE) == 0;
}
static int i965_do_reset(struct drm_device *dev)
{
int ret;
u8 gdrst;
/*
* Set the domains we want to reset (GRDOM/bits 2 and 3) as
* well as the reset bit (GR/bit 0). Setting the GR bit
* triggers the reset; when done, the hardware will clear it.
*/
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
pci_write_config_byte(dev->pdev, I965_GDRST,
gdrst | GRDOM_RENDER |
GRDOM_RESET_ENABLE);
ret = wait_for(i965_reset_complete(dev), 500);
if (ret)
return ret;
/* We can't reset render&media without also resetting display ... */
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
pci_write_config_byte(dev->pdev, I965_GDRST,
gdrst | GRDOM_MEDIA |
GRDOM_RESET_ENABLE);
return wait_for(i965_reset_complete(dev), 500);
}
static int ironlake_do_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 gdrst;
int ret;
gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
gdrst | GRDOM_RENDER | GRDOM_RESET_ENABLE);
ret = wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
if (ret)
return ret;
/* We can't reset render&media without also resetting display ... */
gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
gdrst | GRDOM_MEDIA | GRDOM_RESET_ENABLE);
return wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
}
static int gen6_do_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
unsigned long irqflags;
/* Hold gt_lock across reset to prevent any register access
* with forcewake not set correctly
*/
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
/* Reset the chip */
/* GEN6_GDRST is not in the gt power well, no need to check
* for fifo space for the write or forcewake the chip for
* the read
*/
I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL);
/* Spin waiting for the device to ack the reset request */
ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
/* If reset with a user forcewake, try to restore, otherwise turn it off */
if (dev_priv->forcewake_count)
dev_priv->gt.force_wake_get(dev_priv);
else
dev_priv->gt.force_wake_put(dev_priv);
/* Restore fifo count */
dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
return ret;
}
int intel_gpu_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = -ENODEV;
switch (INTEL_INFO(dev)->gen) {
case 7:
case 6:
ret = gen6_do_reset(dev);
break;
case 5:
ret = ironlake_do_reset(dev);
break;
case 4:
ret = i965_do_reset(dev);
break;
case 2:
ret = i8xx_do_reset(dev);
break;
}
/* Also reset the gpu hangman. */
if (dev_priv->stop_rings) {
DRM_DEBUG("Simulated gpu hang, resetting stop_rings\n");
dev_priv->stop_rings = 0;
if (ret == -ENODEV) {
DRM_ERROR("Reset not implemented, but ignoring "
"error for simulated gpu hangs\n");
ret = 0;
}
}
return ret;
}
/**
* i915_reset - reset chip after a hang
* @dev: drm device to reset
*
* Reset the chip. Useful if a hang is detected. Returns zero on successful
* reset or otherwise an error code.
*
* Procedure is fairly simple:
* - reset the chip using the reset reg
* - re-init context state
* - re-init hardware status page
* - re-init ring buffer
* - re-init interrupt state
* - re-init display
*/
int i915_reset(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
if (!i915_try_reset)
return 0;
mutex_lock(&dev->struct_mutex);
i915_gem_reset(dev);
ret = -ENODEV;
if (get_seconds() - dev_priv->last_gpu_reset < 5)
DRM_ERROR("GPU hanging too fast, declaring wedged!\n");
else
ret = intel_gpu_reset(dev);
dev_priv->last_gpu_reset = get_seconds();
if (ret) {
DRM_ERROR("Failed to reset chip.\n");
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* Ok, now get things going again... */
/*
* Everything depends on having the GTT running, so we need to start
* there. Fortunately we don't need to do this unless we reset the
* chip at a PCI level.
*
* Next we need to restore the context, but we don't use those
* yet either...
*
* Ring buffer needs to be re-initialized in the KMS case, or if X
* was running at the time of the reset (i.e. we weren't VT
* switched away).
*/
if (drm_core_check_feature(dev, DRIVER_MODESET) ||
!dev_priv->mm.suspended) {
struct intel_ring_buffer *ring;
int i;
dev_priv->mm.suspended = 0;
i915_gem_init_swizzling(dev);
for_each_ring(ring, dev_priv, i)
ring->init(ring);
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 05:42:42 +08:00
i915_gem_context_init(dev);
i915_gem_init_ppgtt(dev);
/*
* It would make sense to re-init all the other hw state, at
* least the rps/rc6/emon init done within modeset_init_hw. For
* some unknown reason, this blows up my ilk, so don't.
*/
mutex_unlock(&dev->struct_mutex);
drm_irq_uninstall(dev);
drm_irq_install(dev);
} else {
mutex_unlock(&dev->struct_mutex);
}
return 0;
}
static int __devinit
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct intel_device_info *intel_info =
(struct intel_device_info *) ent->driver_data;
/* Only bind to function 0 of the device. Early generations
* used function 1 as a placeholder for multi-head. This causes
* us confusion instead, especially on the systems where both
* functions have the same PCI-ID!
*/
if (PCI_FUNC(pdev->devfn))
return -ENODEV;
/* We've managed to ship a kms-enabled ddx that shipped with an XvMC
* implementation for gen3 (and only gen3) that used legacy drm maps
* (gasp!) to share buffers between X and the client. Hence we need to
* keep around the fake agp stuff for gen3, even when kms is enabled. */
if (intel_info->gen != 3) {
driver.driver_features &=
~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP);
} else if (!intel_agp_enabled) {
DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
return -ENODEV;
}
return drm_get_pci_dev(pdev, ent, &driver);
}
static void
i915_pci_remove(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
drm_put_dev(dev);
}
static int i915_pm_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
int error;
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
error = i915_drm_freeze(drm_dev);
if (error)
return error;
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
static int i915_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_resume(drm_dev);
}
static int i915_pm_freeze(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
return i915_drm_freeze(drm_dev);
}
static int i915_pm_thaw(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_drm_thaw(drm_dev);
}
static int i915_pm_poweroff(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
return i915_drm_freeze(drm_dev);
}
static const struct dev_pm_ops i915_pm_ops = {
.suspend = i915_pm_suspend,
.resume = i915_pm_resume,
.freeze = i915_pm_freeze,
.thaw = i915_pm_thaw,
.poweroff = i915_pm_poweroff,
.restore = i915_pm_resume,
};
static const struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
.open = drm_gem_vm_open,
.close = drm_gem_vm_close,
};
static const struct file_operations i915_driver_fops = {
.owner = THIS_MODULE,
.open = drm_open,
.release = drm_release,
.unlocked_ioctl = drm_ioctl,
.mmap = drm_gem_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
.read = drm_read,
#ifdef CONFIG_COMPAT
.compat_ioctl = i915_compat_ioctl,
#endif
.llseek = noop_llseek,
};
static struct drm_driver driver = {
/* Don't use MTRRs here; the Xserver or userspace app should
* deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
i915: add dmabuf/prime buffer sharing support. This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-10 21:25:09 +08:00
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME,
.load = i915_driver_load,
.unload = i915_driver_unload,
.open = i915_driver_open,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
.suspend = i915_suspend,
.resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
.master_create = i915_master_create,
.master_destroy = i915_master_destroy,
#if defined(CONFIG_DEBUG_FS)
.debugfs_init = i915_debugfs_init,
.debugfs_cleanup = i915_debugfs_cleanup,
#endif
.gem_init_object = i915_gem_init_object,
.gem_free_object = i915_gem_free_object,
.gem_vm_ops = &i915_gem_vm_ops,
i915: add dmabuf/prime buffer sharing support. This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-10 21:25:09 +08:00
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_export = i915_gem_prime_export,
.gem_prime_import = i915_gem_prime_import,
.dumb_create = i915_gem_dumb_create,
.dumb_map_offset = i915_gem_mmap_gtt,
.dumb_destroy = i915_gem_dumb_destroy,
.ioctls = i915_ioctls,
.fops = &i915_driver_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
};
static struct pci_driver i915_pci_driver = {
.name = DRIVER_NAME,
.id_table = pciidlist,
.probe = i915_pci_probe,
.remove = i915_pci_remove,
.driver.pm = &i915_pm_ops,
};
static int __init i915_init(void)
{
driver.num_ioctls = i915_max_ioctl;
/*
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
* explicitly disabled with the module pararmeter.
*
* Otherwise, just follow the parameter (defaulting to off).
*
* Allow optional vga_text_mode_force boot option to override
* the default behavior.
*/
#if defined(CONFIG_DRM_I915_KMS)
if (i915_modeset != 0)
driver.driver_features |= DRIVER_MODESET;
#endif
if (i915_modeset == 1)
driver.driver_features |= DRIVER_MODESET;
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force() && i915_modeset == -1)
driver.driver_features &= ~DRIVER_MODESET;
#endif
if (!(driver.driver_features & DRIVER_MODESET))
driver.get_vblank_timestamp = NULL;
return drm_pci_init(&driver, &i915_pci_driver);
}
static void __exit i915_exit(void)
{
drm_pci_exit(&driver, &i915_pci_driver);
}
module_init(i915_init);
module_exit(i915_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
((HAS_FORCE_WAKE((dev_priv)->dev)) && \
((reg) < 0x40000) && \
((reg) != FORCEWAKE))
static bool IS_DISPLAYREG(u32 reg)
{
/*
* This should make it easier to transition modules over to the
* new register block scheme, since we can do it incrementally.
*/
if (reg >= VLV_DISPLAY_BASE)
return false;
if (reg >= RENDER_RING_BASE &&
reg < RENDER_RING_BASE + 0xff)
return false;
if (reg >= GEN6_BSD_RING_BASE &&
reg < GEN6_BSD_RING_BASE + 0xff)
return false;
if (reg >= BLT_RING_BASE &&
reg < BLT_RING_BASE + 0xff)
return false;
if (reg == PGTBL_ER)
return false;
if (reg >= IPEIR_I965 &&
reg < HWSTAM)
return false;
if (reg == MI_MODE)
return false;
if (reg == GFX_MODE_GEN7)
return false;
if (reg == RENDER_HWS_PGA_GEN7 ||
reg == BSD_HWS_PGA_GEN7 ||
reg == BLT_HWS_PGA_GEN7)
return false;
if (reg == GEN6_BSD_SLEEP_PSMI_CONTROL ||
reg == GEN6_BSD_RNCID)
return false;
if (reg == GEN6_BLITTER_ECOSKPD)
return false;
if (reg >= 0x4000c &&
reg <= 0x4002c)
return false;
if (reg >= 0x4f000 &&
reg <= 0x4f08f)
return false;
if (reg >= 0x4f100 &&
reg <= 0x4f11f)
return false;
if (reg >= VLV_MASTER_IER &&
reg <= GEN6_PMIER)
return false;
if (reg >= FENCE_REG_SANDYBRIDGE_0 &&
reg < (FENCE_REG_SANDYBRIDGE_0 + (16*8)))
return false;
if (reg >= VLV_IIR_RW &&
reg <= VLV_ISR)
return false;
if (reg == FORCEWAKE_VLV ||
reg == FORCEWAKE_ACK_VLV)
return false;
if (reg == GEN6_GDRST)
return false;
return true;
}
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
u##x val = 0; \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
unsigned long irqflags; \
spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
if (dev_priv->forcewake_count == 0) \
dev_priv->gt.force_wake_get(dev_priv); \
val = read##y(dev_priv->regs + reg); \
if (dev_priv->forcewake_count == 0) \
dev_priv->gt.force_wake_put(dev_priv); \
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
} else if (IS_VALLEYVIEW(dev_priv->dev) && IS_DISPLAYREG(reg)) { \
val = read##y(dev_priv->regs + reg + 0x180000); \
} else { \
val = read##y(dev_priv->regs + reg); \
} \
trace_i915_reg_rw(false, reg, val, sizeof(val)); \
return val; \
}
__i915_read(8, b)
__i915_read(16, w)
__i915_read(32, l)
__i915_read(64, q)
#undef __i915_read
#define __i915_write(x, y) \
void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \
u32 __fifo_ret = 0; \
trace_i915_reg_rw(true, reg, val, sizeof(val)); \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
__fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \
} \
if (IS_VALLEYVIEW(dev_priv->dev) && IS_DISPLAYREG(reg)) { \
write##y(val, dev_priv->regs + reg + 0x180000); \
} else { \
write##y(val, dev_priv->regs + reg); \
} \
if (unlikely(__fifo_ret)) { \
gen6_gt_check_fifodbg(dev_priv); \
} \
}
__i915_write(8, b)
__i915_write(16, w)
__i915_write(32, l)
__i915_write(64, q)
#undef __i915_write
static const struct register_whitelist {
uint64_t offset;
uint32_t size;
uint32_t gen_bitmask; /* support gens, 0x10 for 4, 0x30 for 4 and 5, etc. */
} whitelist[] = {
{ RING_TIMESTAMP(RENDER_RING_BASE), 8, 0xF0 },
};
int i915_reg_read_ioctl(struct drm_device *dev,
void *data, struct drm_file *file)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_reg_read *reg = data;
struct register_whitelist const *entry = whitelist;
int i;
for (i = 0; i < ARRAY_SIZE(whitelist); i++, entry++) {
if (entry->offset == reg->offset &&
(1 << INTEL_INFO(dev)->gen & entry->gen_bitmask))
break;
}
if (i == ARRAY_SIZE(whitelist))
return -EINVAL;
switch (entry->size) {
case 8:
reg->val = I915_READ64(reg->offset);
break;
case 4:
reg->val = I915_READ(reg->offset);
break;
case 2:
reg->val = I915_READ16(reg->offset);
break;
case 1:
reg->val = I915_READ8(reg->offset);
break;
default:
WARN_ON(1);
return -EINVAL;
}
return 0;
}