OpenCloudOS-Kernel/drivers/regulator/tps65023-regulator.c

545 lines
13 KiB
C
Raw Normal View History

/*
* tps65023-regulator.c
*
* Supports TPS65023 Regulator
*
* Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
* whether express or implied; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/regmap.h>
/* Register definitions */
#define TPS65023_REG_VERSION 0
#define TPS65023_REG_PGOODZ 1
#define TPS65023_REG_MASK 2
#define TPS65023_REG_REG_CTRL 3
#define TPS65023_REG_CON_CTRL 4
#define TPS65023_REG_CON_CTRL2 5
#define TPS65023_REG_DEF_CORE 6
#define TPS65023_REG_DEFSLEW 7
#define TPS65023_REG_LDO_CTRL 8
/* PGOODZ bitfields */
#define TPS65023_PGOODZ_PWRFAILZ BIT(7)
#define TPS65023_PGOODZ_LOWBATTZ BIT(6)
#define TPS65023_PGOODZ_VDCDC1 BIT(5)
#define TPS65023_PGOODZ_VDCDC2 BIT(4)
#define TPS65023_PGOODZ_VDCDC3 BIT(3)
#define TPS65023_PGOODZ_LDO2 BIT(2)
#define TPS65023_PGOODZ_LDO1 BIT(1)
/* MASK bitfields */
#define TPS65023_MASK_PWRFAILZ BIT(7)
#define TPS65023_MASK_LOWBATTZ BIT(6)
#define TPS65023_MASK_VDCDC1 BIT(5)
#define TPS65023_MASK_VDCDC2 BIT(4)
#define TPS65023_MASK_VDCDC3 BIT(3)
#define TPS65023_MASK_LDO2 BIT(2)
#define TPS65023_MASK_LDO1 BIT(1)
/* REG_CTRL bitfields */
#define TPS65023_REG_CTRL_VDCDC1_EN BIT(5)
#define TPS65023_REG_CTRL_VDCDC2_EN BIT(4)
#define TPS65023_REG_CTRL_VDCDC3_EN BIT(3)
#define TPS65023_REG_CTRL_LDO2_EN BIT(2)
#define TPS65023_REG_CTRL_LDO1_EN BIT(1)
/* REG_CTRL2 bitfields */
#define TPS65023_REG_CTRL2_GO BIT(7)
#define TPS65023_REG_CTRL2_CORE_ADJ BIT(6)
#define TPS65023_REG_CTRL2_DCDC2 BIT(2)
#define TPS65023_REG_CTRL2_DCDC1 BIT(1)
#define TPS65023_REG_CTRL2_DCDC3 BIT(0)
/* LDO_CTRL bitfields */
#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4)
#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x07 << ((ldo_id)*4))
/* Number of step-down converters available */
#define TPS65023_NUM_DCDC 3
/* Number of LDO voltage regulators available */
#define TPS65023_NUM_LDO 2
/* Number of total regulators available */
#define TPS65023_NUM_REGULATOR (TPS65023_NUM_DCDC + TPS65023_NUM_LDO)
/* DCDCs */
#define TPS65023_DCDC_1 0
#define TPS65023_DCDC_2 1
#define TPS65023_DCDC_3 2
/* LDOs */
#define TPS65023_LDO_1 3
#define TPS65023_LDO_2 4
#define TPS65023_MAX_REG_ID TPS65023_LDO_2
/* Supported voltage values for regulators */
static const u16 VCORE_VSEL_table[] = {
800, 825, 850, 875,
900, 925, 950, 975,
1000, 1025, 1050, 1075,
1100, 1125, 1150, 1175,
1200, 1225, 1250, 1275,
1300, 1325, 1350, 1375,
1400, 1425, 1450, 1475,
1500, 1525, 1550, 1600,
};
/* Supported voltage values for LDO regulators for tps65020 */
static const u16 TPS65020_LDO1_VSEL_table[] = {
1000, 1050, 1100, 1300,
1800, 2500, 3000, 3300,
};
static const u16 TPS65020_LDO2_VSEL_table[] = {
1000, 1050, 1100, 1300,
1800, 2500, 3000, 3300,
};
/* Supported voltage values for LDO regulators
* for tps65021 and tps65023 */
static const u16 TPS65023_LDO1_VSEL_table[] = {
1000, 1100, 1300, 1800,
2200, 2600, 2800, 3150,
};
static const u16 TPS65023_LDO2_VSEL_table[] = {
1050, 1200, 1300, 1800,
2500, 2800, 3000, 3300,
};
/* Regulator specific details */
struct tps_info {
const char *name;
unsigned min_uV;
unsigned max_uV;
bool fixed;
u8 table_len;
const u16 *table;
};
/* PMIC details */
struct tps_pmic {
struct regulator_desc desc[TPS65023_NUM_REGULATOR];
struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
const struct tps_info *info[TPS65023_NUM_REGULATOR];
struct regmap *regmap;
u8 core_regulator;
};
/* Struct passed as driver data */
struct tps_driver_data {
const struct tps_info *info;
u8 core_regulator;
};
static int tps65023_dcdc_get_voltage(struct regulator_dev *dev)
{
struct tps_pmic *tps = rdev_get_drvdata(dev);
int ret;
int data, dcdc = rdev_get_id(dev);
if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
return -EINVAL;
if (dcdc == tps->core_regulator) {
ret = regmap_read(tps->regmap, TPS65023_REG_DEF_CORE, &data);
if (ret != 0)
return ret;
data &= (tps->info[dcdc]->table_len - 1);
return tps->info[dcdc]->table[data] * 1000;
} else
return tps->info[dcdc]->min_uV;
}
static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev,
unsigned selector)
{
struct tps_pmic *tps = rdev_get_drvdata(dev);
int dcdc = rdev_get_id(dev);
int ret;
if (dcdc != tps->core_regulator)
return -EINVAL;
ret = regmap_write(tps->regmap, TPS65023_REG_DEF_CORE, selector);
if (ret)
goto out;
/* Tell the chip that we have changed the value in DEFCORE
* and its time to update the core voltage
*/
ret = regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2,
TPS65023_REG_CTRL2_GO, TPS65023_REG_CTRL2_GO);
out:
return ret;
}
static int tps65023_ldo_get_voltage(struct regulator_dev *dev)
{
struct tps_pmic *tps = rdev_get_drvdata(dev);
int data, ldo = rdev_get_id(dev);
int ret;
if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
return -EINVAL;
ret = regmap_read(tps->regmap, TPS65023_REG_LDO_CTRL, &data);
if (ret != 0)
return ret;
data >>= (TPS65023_LDO_CTRL_LDOx_SHIFT(ldo - TPS65023_LDO_1));
data &= (tps->info[ldo]->table_len - 1);
return tps->info[ldo]->table[data] * 1000;
}
static int tps65023_ldo_set_voltage_sel(struct regulator_dev *dev,
unsigned selector)
{
struct tps_pmic *tps = rdev_get_drvdata(dev);
int ldo_index = rdev_get_id(dev) - TPS65023_LDO_1;
return regmap_update_bits(tps->regmap, TPS65023_REG_LDO_CTRL,
TPS65023_LDO_CTRL_LDOx_MASK(ldo_index),
selector << TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_index));
}
static int tps65023_dcdc_list_voltage(struct regulator_dev *dev,
unsigned selector)
{
struct tps_pmic *tps = rdev_get_drvdata(dev);
int dcdc = rdev_get_id(dev);
if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
return -EINVAL;
if (dcdc == tps->core_regulator) {
if (selector >= tps->info[dcdc]->table_len)
return -EINVAL;
else
return tps->info[dcdc]->table[selector] * 1000;
} else
return tps->info[dcdc]->min_uV;
}
static int tps65023_ldo_list_voltage(struct regulator_dev *dev,
unsigned selector)
{
struct tps_pmic *tps = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev);
if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
return -EINVAL;
if (selector >= tps->info[ldo]->table_len)
return -EINVAL;
else
return tps->info[ldo]->table[selector] * 1000;
}
/* Operations permitted on VDCDCx */
static struct regulator_ops tps65023_dcdc_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage = tps65023_dcdc_get_voltage,
.set_voltage_sel = tps65023_dcdc_set_voltage_sel,
.list_voltage = tps65023_dcdc_list_voltage,
};
/* Operations permitted on LDOx */
static struct regulator_ops tps65023_ldo_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage = tps65023_ldo_get_voltage,
.set_voltage_sel = tps65023_ldo_set_voltage_sel,
.list_voltage = tps65023_ldo_list_voltage,
};
static struct regmap_config tps65023_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static int __devinit tps_65023_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct tps_driver_data *drv_data = (void *)id->driver_data;
const struct tps_info *info = drv_data->info;
struct regulator_config config = { };
struct regulator_init_data *init_data;
struct regulator_dev *rdev;
struct tps_pmic *tps;
int i;
int error;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
/**
* init_data points to array of regulator_init structures
* coming from the board-evm file.
*/
init_data = client->dev.platform_data;
if (!init_data)
return -EIO;
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config);
if (IS_ERR(tps->regmap)) {
error = PTR_ERR(tps->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
/* common for all regulators */
tps->core_regulator = drv_data->core_regulator;
for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
/* Store regulator specific information */
tps->info[i] = info;
tps->desc[i].name = info->name;
tps->desc[i].id = i;
tps->desc[i].n_voltages = info->table_len;
tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
&tps65023_ldo_ops : &tps65023_dcdc_ops);
tps->desc[i].type = REGULATOR_VOLTAGE;
tps->desc[i].owner = THIS_MODULE;
tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
if (i == TPS65023_LDO_1)
tps->desc[i].enable_mask = 1 << 1;
else if (i == TPS65023_LDO_2)
tps->desc[i].enable_mask = 1 << 2;
else /* DCDCx */
tps->desc[i].enable_mask =
1 << (TPS65023_NUM_REGULATOR - i);
config.dev = &client->dev;
config.init_data = init_data;
config.driver_data = tps;
config.regmap = tps->regmap;
/* Register the regulators */
rdev = regulator_register(&tps->desc[i], &config);
if (IS_ERR(rdev)) {
dev_err(&client->dev, "failed to register %s\n",
id->name);
error = PTR_ERR(rdev);
goto fail;
}
/* Save regulator for cleanup */
tps->rdev[i] = rdev;
}
i2c_set_clientdata(client, tps);
/* Enable setting output voltage by I2C */
regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2,
TPS65023_REG_CTRL2_CORE_ADJ, TPS65023_REG_CTRL2_CORE_ADJ);
return 0;
fail:
while (--i >= 0)
regulator_unregister(tps->rdev[i]);
return error;
}
static int __devexit tps_65023_remove(struct i2c_client *client)
{
struct tps_pmic *tps = i2c_get_clientdata(client);
int i;
for (i = 0; i < TPS65023_NUM_REGULATOR; i++)
regulator_unregister(tps->rdev[i]);
return 0;
}
static const struct tps_info tps65020_regs[] = {
{
.name = "VDCDC1",
.min_uV = 3300000,
.max_uV = 3300000,
.fixed = 1,
},
{
.name = "VDCDC2",
.min_uV = 1800000,
.max_uV = 1800000,
.fixed = 1,
},
{
.name = "VDCDC3",
.min_uV = 800000,
.max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
{
.name = "LDO1",
.min_uV = 1000000,
.max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65020_LDO1_VSEL_table),
.table = TPS65020_LDO1_VSEL_table,
},
{
.name = "LDO2",
.min_uV = 1050000,
.max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65020_LDO2_VSEL_table),
.table = TPS65020_LDO2_VSEL_table,
},
};
static const struct tps_info tps65021_regs[] = {
{
.name = "VDCDC1",
.min_uV = 3300000,
.max_uV = 3300000,
.fixed = 1,
},
{
.name = "VDCDC2",
.min_uV = 1800000,
.max_uV = 1800000,
.fixed = 1,
},
{
.name = "VDCDC3",
.min_uV = 800000,
.max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
{
.name = "LDO1",
.min_uV = 1000000,
.max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
.table = TPS65023_LDO1_VSEL_table,
},
{
.name = "LDO2",
.min_uV = 1050000,
.max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
.table = TPS65023_LDO2_VSEL_table,
},
};
static const struct tps_info tps65023_regs[] = {
{
.name = "VDCDC1",
.min_uV = 800000,
.max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
{
.name = "VDCDC2",
.min_uV = 3300000,
.max_uV = 3300000,
.fixed = 1,
},
{
.name = "VDCDC3",
.min_uV = 1800000,
.max_uV = 1800000,
.fixed = 1,
},
{
.name = "LDO1",
.min_uV = 1000000,
.max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
.table = TPS65023_LDO1_VSEL_table,
},
{
.name = "LDO2",
.min_uV = 1050000,
.max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
.table = TPS65023_LDO2_VSEL_table,
},
};
static struct tps_driver_data tps65020_drv_data = {
.info = tps65020_regs,
.core_regulator = TPS65023_DCDC_3,
};
static struct tps_driver_data tps65021_drv_data = {
.info = tps65021_regs,
.core_regulator = TPS65023_DCDC_3,
};
static struct tps_driver_data tps65023_drv_data = {
.info = tps65023_regs,
.core_regulator = TPS65023_DCDC_1,
};
static const struct i2c_device_id tps_65023_id[] = {
{.name = "tps65023",
.driver_data = (unsigned long) &tps65023_drv_data},
{.name = "tps65021",
.driver_data = (unsigned long) &tps65021_drv_data,},
{.name = "tps65020",
.driver_data = (unsigned long) &tps65020_drv_data},
{ },
};
MODULE_DEVICE_TABLE(i2c, tps_65023_id);
static struct i2c_driver tps_65023_i2c_driver = {
.driver = {
.name = "tps65023",
.owner = THIS_MODULE,
},
.probe = tps_65023_probe,
.remove = __devexit_p(tps_65023_remove),
.id_table = tps_65023_id,
};
static int __init tps_65023_init(void)
{
return i2c_add_driver(&tps_65023_i2c_driver);
}
subsys_initcall(tps_65023_init);
static void __exit tps_65023_cleanup(void)
{
i2c_del_driver(&tps_65023_i2c_driver);
}
module_exit(tps_65023_cleanup);
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("TPS65023 voltage regulator driver");
MODULE_LICENSE("GPL v2");