OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_lrc.c

2030 lines
59 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Ben Widawsky <ben@bwidawsk.net>
* Michel Thierry <michel.thierry@intel.com>
* Thomas Daniel <thomas.daniel@intel.com>
* Oscar Mateo <oscar.mateo@intel.com>
*
*/
/**
* DOC: Logical Rings, Logical Ring Contexts and Execlists
*
* Motivation:
* GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts".
* These expanded contexts enable a number of new abilities, especially
* "Execlists" (also implemented in this file).
*
* One of the main differences with the legacy HW contexts is that logical
* ring contexts incorporate many more things to the context's state, like
* PDPs or ringbuffer control registers:
*
* The reason why PDPs are included in the context is straightforward: as
* PPGTTs (per-process GTTs) are actually per-context, having the PDPs
* contained there mean you don't need to do a ppgtt->switch_mm yourself,
* instead, the GPU will do it for you on the context switch.
*
* But, what about the ringbuffer control registers (head, tail, etc..)?
* shouldn't we just need a set of those per engine command streamer? This is
* where the name "Logical Rings" starts to make sense: by virtualizing the
* rings, the engine cs shifts to a new "ring buffer" with every context
* switch. When you want to submit a workload to the GPU you: A) choose your
* context, B) find its appropriate virtualized ring, C) write commands to it
* and then, finally, D) tell the GPU to switch to that context.
*
* Instead of the legacy MI_SET_CONTEXT, the way you tell the GPU to switch
* to a contexts is via a context execution list, ergo "Execlists".
*
* LRC implementation:
* Regarding the creation of contexts, we have:
*
* - One global default context.
* - One local default context for each opened fd.
* - One local extra context for each context create ioctl call.
*
* Now that ringbuffers belong per-context (and not per-engine, like before)
* and that contexts are uniquely tied to a given engine (and not reusable,
* like before) we need:
*
* - One ringbuffer per-engine inside each context.
* - One backing object per-engine inside each context.
*
* The global default context starts its life with these new objects fully
* allocated and populated. The local default context for each opened fd is
* more complex, because we don't know at creation time which engine is going
* to use them. To handle this, we have implemented a deferred creation of LR
* contexts:
*
* The local context starts its life as a hollow or blank holder, that only
* gets populated for a given engine once we receive an execbuffer. If later
* on we receive another execbuffer ioctl for the same context but a different
* engine, we allocate/populate a new ringbuffer and context backing object and
* so on.
*
* Finally, regarding local contexts created using the ioctl call: as they are
* only allowed with the render ring, we can allocate & populate them right
* away (no need to defer anything, at least for now).
*
* Execlists implementation:
* Execlists are the new method by which, on gen8+ hardware, workloads are
* submitted for execution (as opposed to the legacy, ringbuffer-based, method).
* This method works as follows:
*
* When a request is committed, its commands (the BB start and any leading or
* trailing commands, like the seqno breadcrumbs) are placed in the ringbuffer
* for the appropriate context. The tail pointer in the hardware context is not
* updated at this time, but instead, kept by the driver in the ringbuffer
* structure. A structure representing this request is added to a request queue
* for the appropriate engine: this structure contains a copy of the context's
* tail after the request was written to the ring buffer and a pointer to the
* context itself.
*
* If the engine's request queue was empty before the request was added, the
* queue is processed immediately. Otherwise the queue will be processed during
* a context switch interrupt. In any case, elements on the queue will get sent
* (in pairs) to the GPU's ExecLists Submit Port (ELSP, for short) with a
* globally unique 20-bits submission ID.
*
* When execution of a request completes, the GPU updates the context status
* buffer with a context complete event and generates a context switch interrupt.
* During the interrupt handling, the driver examines the events in the buffer:
* for each context complete event, if the announced ID matches that on the head
* of the request queue, then that request is retired and removed from the queue.
*
* After processing, if any requests were retired and the queue is not empty
* then a new execution list can be submitted. The two requests at the front of
* the queue are next to be submitted but since a context may not occur twice in
* an execution list, if subsequent requests have the same ID as the first then
* the two requests must be combined. This is done simply by discarding requests
* at the head of the queue until either only one requests is left (in which case
* we use a NULL second context) or the first two requests have unique IDs.
*
* By always executing the first two requests in the queue the driver ensures
* that the GPU is kept as busy as possible. In the case where a single context
* completes but a second context is still executing, the request for this second
* context will be at the head of the queue when we remove the first one. This
* request will then be resubmitted along with a new request for a different context,
* which will cause the hardware to continue executing the second request and queue
* the new request (the GPU detects the condition of a context getting preempted
* with the same context and optimizes the context switch flow by not doing
* preemption, but just sampling the new tail pointer).
*
*/
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#define GEN9_LR_CONTEXT_RENDER_SIZE (22 * PAGE_SIZE)
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
#define GEN8_LR_CONTEXT_RENDER_SIZE (20 * PAGE_SIZE)
#define GEN8_LR_CONTEXT_OTHER_SIZE (2 * PAGE_SIZE)
2014-07-25 00:04:39 +08:00
#define RING_EXECLIST_QFULL (1 << 0x2)
#define RING_EXECLIST1_VALID (1 << 0x3)
#define RING_EXECLIST0_VALID (1 << 0x4)
#define RING_EXECLIST_ACTIVE_STATUS (3 << 0xE)
#define RING_EXECLIST1_ACTIVE (1 << 0x11)
#define RING_EXECLIST0_ACTIVE (1 << 0x12)
#define GEN8_CTX_STATUS_IDLE_ACTIVE (1 << 0)
#define GEN8_CTX_STATUS_PREEMPTED (1 << 1)
#define GEN8_CTX_STATUS_ELEMENT_SWITCH (1 << 2)
#define GEN8_CTX_STATUS_ACTIVE_IDLE (1 << 3)
#define GEN8_CTX_STATUS_COMPLETE (1 << 4)
#define GEN8_CTX_STATUS_LITE_RESTORE (1 << 15)
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
#define CTX_LRI_HEADER_0 0x01
#define CTX_CONTEXT_CONTROL 0x02
#define CTX_RING_HEAD 0x04
#define CTX_RING_TAIL 0x06
#define CTX_RING_BUFFER_START 0x08
#define CTX_RING_BUFFER_CONTROL 0x0a
#define CTX_BB_HEAD_U 0x0c
#define CTX_BB_HEAD_L 0x0e
#define CTX_BB_STATE 0x10
#define CTX_SECOND_BB_HEAD_U 0x12
#define CTX_SECOND_BB_HEAD_L 0x14
#define CTX_SECOND_BB_STATE 0x16
#define CTX_BB_PER_CTX_PTR 0x18
#define CTX_RCS_INDIRECT_CTX 0x1a
#define CTX_RCS_INDIRECT_CTX_OFFSET 0x1c
#define CTX_LRI_HEADER_1 0x21
#define CTX_CTX_TIMESTAMP 0x22
#define CTX_PDP3_UDW 0x24
#define CTX_PDP3_LDW 0x26
#define CTX_PDP2_UDW 0x28
#define CTX_PDP2_LDW 0x2a
#define CTX_PDP1_UDW 0x2c
#define CTX_PDP1_LDW 0x2e
#define CTX_PDP0_UDW 0x30
#define CTX_PDP0_LDW 0x32
#define CTX_LRI_HEADER_2 0x41
#define CTX_R_PWR_CLK_STATE 0x42
#define CTX_GPGPU_CSR_BASE_ADDRESS 0x44
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
#define GEN8_CTX_VALID (1<<0)
#define GEN8_CTX_FORCE_PD_RESTORE (1<<1)
#define GEN8_CTX_FORCE_RESTORE (1<<2)
#define GEN8_CTX_L3LLC_COHERENT (1<<5)
#define GEN8_CTX_PRIVILEGE (1<<8)
enum {
ADVANCED_CONTEXT = 0,
LEGACY_CONTEXT,
ADVANCED_AD_CONTEXT,
LEGACY_64B_CONTEXT
};
#define GEN8_CTX_MODE_SHIFT 3
enum {
FAULT_AND_HANG = 0,
FAULT_AND_HALT, /* Debug only */
FAULT_AND_STREAM,
FAULT_AND_CONTINUE /* Unsupported */
};
#define GEN8_CTX_ID_SHIFT 32
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
static int intel_lr_context_pin(struct intel_engine_cs *ring,
struct intel_context *ctx);
/**
* intel_sanitize_enable_execlists() - sanitize i915.enable_execlists
* @dev: DRM device.
* @enable_execlists: value of i915.enable_execlists module parameter.
*
* Only certain platforms support Execlists (the prerequisites being
* support for Logical Ring Contexts and Aliasing PPGTT or better).
*
* Return: 1 if Execlists is supported and has to be enabled.
*/
int intel_sanitize_enable_execlists(struct drm_device *dev, int enable_execlists)
{
WARN_ON(i915.enable_ppgtt == -1);
if (INTEL_INFO(dev)->gen >= 9)
return 1;
if (enable_execlists == 0)
return 0;
if (HAS_LOGICAL_RING_CONTEXTS(dev) && USES_PPGTT(dev) &&
i915.use_mmio_flip >= 0)
return 1;
return 0;
}
/**
* intel_execlists_ctx_id() - get the Execlists Context ID
* @ctx_obj: Logical Ring Context backing object.
*
* Do not confuse with ctx->id! Unfortunately we have a name overload
* here: the old context ID we pass to userspace as a handler so that
* they can refer to a context, and the new context ID we pass to the
* ELSP so that the GPU can inform us of the context status via
* interrupts.
*
* Return: 20-bits globally unique context ID.
*/
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
u32 intel_execlists_ctx_id(struct drm_i915_gem_object *ctx_obj)
{
u32 lrca = i915_gem_obj_ggtt_offset(ctx_obj);
/* LRCA is required to be 4K aligned so the more significant 20 bits
* are globally unique */
return lrca >> 12;
}
static uint64_t execlists_ctx_descriptor(struct intel_engine_cs *ring,
struct drm_i915_gem_object *ctx_obj)
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
{
struct drm_device *dev = ring->dev;
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
uint64_t desc;
uint64_t lrca = i915_gem_obj_ggtt_offset(ctx_obj);
WARN_ON(lrca & 0xFFFFFFFF00000FFFULL);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
desc = GEN8_CTX_VALID;
desc |= LEGACY_CONTEXT << GEN8_CTX_MODE_SHIFT;
desc |= GEN8_CTX_L3LLC_COHERENT;
desc |= GEN8_CTX_PRIVILEGE;
desc |= lrca;
desc |= (u64)intel_execlists_ctx_id(ctx_obj) << GEN8_CTX_ID_SHIFT;
/* TODO: WaDisableLiteRestore when we start using semaphore
* signalling between Command Streamers */
/* desc |= GEN8_CTX_FORCE_RESTORE; */
/* WaEnableForceRestoreInCtxtDescForVCS:skl */
if (IS_GEN9(dev) &&
INTEL_REVID(dev) <= SKL_REVID_B0 &&
(ring->id == BCS || ring->id == VCS ||
ring->id == VECS || ring->id == VCS2))
desc |= GEN8_CTX_FORCE_RESTORE;
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
return desc;
}
static void execlists_elsp_write(struct intel_engine_cs *ring,
struct drm_i915_gem_object *ctx_obj0,
struct drm_i915_gem_object *ctx_obj1)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
uint64_t temp = 0;
uint32_t desc[4];
/* XXX: You must always write both descriptors in the order below. */
if (ctx_obj1)
temp = execlists_ctx_descriptor(ring, ctx_obj1);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
else
temp = 0;
desc[1] = (u32)(temp >> 32);
desc[0] = (u32)temp;
temp = execlists_ctx_descriptor(ring, ctx_obj0);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
desc[3] = (u32)(temp >> 32);
desc[2] = (u32)temp;
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
I915_WRITE(RING_ELSP(ring), desc[1]);
I915_WRITE(RING_ELSP(ring), desc[0]);
I915_WRITE(RING_ELSP(ring), desc[3]);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
/* The context is automatically loaded after the following */
I915_WRITE(RING_ELSP(ring), desc[2]);
/* ELSP is a wo register, so use another nearby reg for posting instead */
POSTING_READ(RING_EXECLIST_STATUS(ring));
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
}
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
static int execlists_update_context(struct drm_i915_gem_object *ctx_obj,
struct drm_i915_gem_object *ring_obj,
u32 tail)
{
struct page *page;
uint32_t *reg_state;
page = i915_gem_object_get_page(ctx_obj, 1);
reg_state = kmap_atomic(page);
reg_state[CTX_RING_TAIL+1] = tail;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
reg_state[CTX_RING_BUFFER_START+1] = i915_gem_obj_ggtt_offset(ring_obj);
kunmap_atomic(reg_state);
return 0;
}
static void execlists_submit_contexts(struct intel_engine_cs *ring,
struct intel_context *to0, u32 tail0,
struct intel_context *to1, u32 tail1)
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
{
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
struct drm_i915_gem_object *ctx_obj0 = to0->engine[ring->id].state;
struct intel_ringbuffer *ringbuf0 = to0->engine[ring->id].ringbuf;
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
struct drm_i915_gem_object *ctx_obj1 = NULL;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
struct intel_ringbuffer *ringbuf1 = NULL;
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
BUG_ON(!ctx_obj0);
WARN_ON(!i915_gem_obj_is_pinned(ctx_obj0));
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
WARN_ON(!i915_gem_obj_is_pinned(ringbuf0->obj));
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
execlists_update_context(ctx_obj0, ringbuf0->obj, tail0);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
if (to1) {
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
ringbuf1 = to1->engine[ring->id].ringbuf;
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
ctx_obj1 = to1->engine[ring->id].state;
BUG_ON(!ctx_obj1);
WARN_ON(!i915_gem_obj_is_pinned(ctx_obj1));
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
WARN_ON(!i915_gem_obj_is_pinned(ringbuf1->obj));
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
execlists_update_context(ctx_obj1, ringbuf1->obj, tail1);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
}
execlists_elsp_write(ring, ctx_obj0, ctx_obj1);
}
static void execlists_context_unqueue(struct intel_engine_cs *ring)
{
struct drm_i915_gem_request *req0 = NULL, *req1 = NULL;
struct drm_i915_gem_request *cursor = NULL, *tmp = NULL;
2014-07-25 00:04:39 +08:00
assert_spin_locked(&ring->execlist_lock);
if (list_empty(&ring->execlist_queue))
return;
/* Try to read in pairs */
list_for_each_entry_safe(cursor, tmp, &ring->execlist_queue,
execlist_link) {
if (!req0) {
req0 = cursor;
} else if (req0->ctx == cursor->ctx) {
/* Same ctx: ignore first request, as second request
* will update tail past first request's workload */
drm/i915/bdw: Avoid non-lite-restore preemptions In the current Execlists feeding mechanism, full preemption is not supported yet: only lite-restores are allowed (this is: the GPU simply samples a new tail pointer for the context currently in execution). But we have identified an scenario in which a full preemption occurs: 1) We submit two contexts for execution (A & B). 2) The GPU finishes with the first one (A), switches to the second one (B) and informs us. 3) We submit B again (hoping to cause a lite restore) together with C, but in the time we spend writing to the ELSP, the GPU finishes B. 4) The GPU start executing B again (since we told it so). 5) We receive a B finished interrupt and, mistakenly, we submit C (again) and D, causing a full preemption of B. The race is avoided by keeping track of how many times a context has been submitted to the hardware and by better discriminating the received context switch interrupts: in the example, when we have submitted B twice, we won´t submit C and D as soon as we receive the notification that B is completed because we were expecting to get a LITE_RESTORE and we didn´t, so we know a second completion will be received shortly. Without this explicit checking, somehow, the batch buffer execution order gets messed with. This can be verified with the IGT test I sent together with the series. I don´t know the exact mechanism by which the pre-emption messes with the execution order but, since other people is working on the Scheduler + Preemption on Execlists, I didn´t try to fix it. In these series, only Lite Restores are supported (other kind of preemptions WARN). v2: elsp_submitted belongs in the new intel_ctx_submit_request. Several rebase changes. v3: Clarify how the race is avoided, as requested by Daniel. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Align function parameters ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:40 +08:00
cursor->elsp_submitted = req0->elsp_submitted;
list_del(&req0->execlist_link);
list_add_tail(&req0->execlist_link,
&ring->execlist_retired_req_list);
req0 = cursor;
} else {
req1 = cursor;
break;
}
}
drm/i915/bdw: Avoid non-lite-restore preemptions In the current Execlists feeding mechanism, full preemption is not supported yet: only lite-restores are allowed (this is: the GPU simply samples a new tail pointer for the context currently in execution). But we have identified an scenario in which a full preemption occurs: 1) We submit two contexts for execution (A & B). 2) The GPU finishes with the first one (A), switches to the second one (B) and informs us. 3) We submit B again (hoping to cause a lite restore) together with C, but in the time we spend writing to the ELSP, the GPU finishes B. 4) The GPU start executing B again (since we told it so). 5) We receive a B finished interrupt and, mistakenly, we submit C (again) and D, causing a full preemption of B. The race is avoided by keeping track of how many times a context has been submitted to the hardware and by better discriminating the received context switch interrupts: in the example, when we have submitted B twice, we won´t submit C and D as soon as we receive the notification that B is completed because we were expecting to get a LITE_RESTORE and we didn´t, so we know a second completion will be received shortly. Without this explicit checking, somehow, the batch buffer execution order gets messed with. This can be verified with the IGT test I sent together with the series. I don´t know the exact mechanism by which the pre-emption messes with the execution order but, since other people is working on the Scheduler + Preemption on Execlists, I didn´t try to fix it. In these series, only Lite Restores are supported (other kind of preemptions WARN). v2: elsp_submitted belongs in the new intel_ctx_submit_request. Several rebase changes. v3: Clarify how the race is avoided, as requested by Daniel. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Align function parameters ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:40 +08:00
WARN_ON(req1 && req1->elsp_submitted);
execlists_submit_contexts(ring, req0->ctx, req0->tail,
req1 ? req1->ctx : NULL,
req1 ? req1->tail : 0);
drm/i915/bdw: Avoid non-lite-restore preemptions In the current Execlists feeding mechanism, full preemption is not supported yet: only lite-restores are allowed (this is: the GPU simply samples a new tail pointer for the context currently in execution). But we have identified an scenario in which a full preemption occurs: 1) We submit two contexts for execution (A & B). 2) The GPU finishes with the first one (A), switches to the second one (B) and informs us. 3) We submit B again (hoping to cause a lite restore) together with C, but in the time we spend writing to the ELSP, the GPU finishes B. 4) The GPU start executing B again (since we told it so). 5) We receive a B finished interrupt and, mistakenly, we submit C (again) and D, causing a full preemption of B. The race is avoided by keeping track of how many times a context has been submitted to the hardware and by better discriminating the received context switch interrupts: in the example, when we have submitted B twice, we won´t submit C and D as soon as we receive the notification that B is completed because we were expecting to get a LITE_RESTORE and we didn´t, so we know a second completion will be received shortly. Without this explicit checking, somehow, the batch buffer execution order gets messed with. This can be verified with the IGT test I sent together with the series. I don´t know the exact mechanism by which the pre-emption messes with the execution order but, since other people is working on the Scheduler + Preemption on Execlists, I didn´t try to fix it. In these series, only Lite Restores are supported (other kind of preemptions WARN). v2: elsp_submitted belongs in the new intel_ctx_submit_request. Several rebase changes. v3: Clarify how the race is avoided, as requested by Daniel. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Align function parameters ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:40 +08:00
req0->elsp_submitted++;
if (req1)
req1->elsp_submitted++;
}
2014-07-25 00:04:39 +08:00
static bool execlists_check_remove_request(struct intel_engine_cs *ring,
u32 request_id)
{
struct drm_i915_gem_request *head_req;
2014-07-25 00:04:39 +08:00
assert_spin_locked(&ring->execlist_lock);
head_req = list_first_entry_or_null(&ring->execlist_queue,
struct drm_i915_gem_request,
2014-07-25 00:04:39 +08:00
execlist_link);
if (head_req != NULL) {
struct drm_i915_gem_object *ctx_obj =
head_req->ctx->engine[ring->id].state;
2014-07-25 00:04:39 +08:00
if (intel_execlists_ctx_id(ctx_obj) == request_id) {
drm/i915/bdw: Avoid non-lite-restore preemptions In the current Execlists feeding mechanism, full preemption is not supported yet: only lite-restores are allowed (this is: the GPU simply samples a new tail pointer for the context currently in execution). But we have identified an scenario in which a full preemption occurs: 1) We submit two contexts for execution (A & B). 2) The GPU finishes with the first one (A), switches to the second one (B) and informs us. 3) We submit B again (hoping to cause a lite restore) together with C, but in the time we spend writing to the ELSP, the GPU finishes B. 4) The GPU start executing B again (since we told it so). 5) We receive a B finished interrupt and, mistakenly, we submit C (again) and D, causing a full preemption of B. The race is avoided by keeping track of how many times a context has been submitted to the hardware and by better discriminating the received context switch interrupts: in the example, when we have submitted B twice, we won´t submit C and D as soon as we receive the notification that B is completed because we were expecting to get a LITE_RESTORE and we didn´t, so we know a second completion will be received shortly. Without this explicit checking, somehow, the batch buffer execution order gets messed with. This can be verified with the IGT test I sent together with the series. I don´t know the exact mechanism by which the pre-emption messes with the execution order but, since other people is working on the Scheduler + Preemption on Execlists, I didn´t try to fix it. In these series, only Lite Restores are supported (other kind of preemptions WARN). v2: elsp_submitted belongs in the new intel_ctx_submit_request. Several rebase changes. v3: Clarify how the race is avoided, as requested by Daniel. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Align function parameters ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:40 +08:00
WARN(head_req->elsp_submitted == 0,
"Never submitted head request\n");
if (--head_req->elsp_submitted <= 0) {
list_del(&head_req->execlist_link);
list_add_tail(&head_req->execlist_link,
&ring->execlist_retired_req_list);
drm/i915/bdw: Avoid non-lite-restore preemptions In the current Execlists feeding mechanism, full preemption is not supported yet: only lite-restores are allowed (this is: the GPU simply samples a new tail pointer for the context currently in execution). But we have identified an scenario in which a full preemption occurs: 1) We submit two contexts for execution (A & B). 2) The GPU finishes with the first one (A), switches to the second one (B) and informs us. 3) We submit B again (hoping to cause a lite restore) together with C, but in the time we spend writing to the ELSP, the GPU finishes B. 4) The GPU start executing B again (since we told it so). 5) We receive a B finished interrupt and, mistakenly, we submit C (again) and D, causing a full preemption of B. The race is avoided by keeping track of how many times a context has been submitted to the hardware and by better discriminating the received context switch interrupts: in the example, when we have submitted B twice, we won´t submit C and D as soon as we receive the notification that B is completed because we were expecting to get a LITE_RESTORE and we didn´t, so we know a second completion will be received shortly. Without this explicit checking, somehow, the batch buffer execution order gets messed with. This can be verified with the IGT test I sent together with the series. I don´t know the exact mechanism by which the pre-emption messes with the execution order but, since other people is working on the Scheduler + Preemption on Execlists, I didn´t try to fix it. In these series, only Lite Restores are supported (other kind of preemptions WARN). v2: elsp_submitted belongs in the new intel_ctx_submit_request. Several rebase changes. v3: Clarify how the race is avoided, as requested by Daniel. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Align function parameters ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:40 +08:00
return true;
}
2014-07-25 00:04:39 +08:00
}
}
return false;
}
/**
* intel_lrc_irq_handler() - handle Context Switch interrupts
* @ring: Engine Command Streamer to handle.
*
* Check the unread Context Status Buffers and manage the submission of new
* contexts to the ELSP accordingly.
*/
void intel_lrc_irq_handler(struct intel_engine_cs *ring)
2014-07-25 00:04:39 +08:00
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
u32 status_pointer;
u8 read_pointer;
u8 write_pointer;
u32 status;
u32 status_id;
u32 submit_contexts = 0;
status_pointer = I915_READ(RING_CONTEXT_STATUS_PTR(ring));
read_pointer = ring->next_context_status_buffer;
write_pointer = status_pointer & 0x07;
if (read_pointer > write_pointer)
write_pointer += 6;
spin_lock(&ring->execlist_lock);
while (read_pointer < write_pointer) {
read_pointer++;
status = I915_READ(RING_CONTEXT_STATUS_BUF(ring) +
(read_pointer % 6) * 8);
status_id = I915_READ(RING_CONTEXT_STATUS_BUF(ring) +
(read_pointer % 6) * 8 + 4);
drm/i915/bdw: Avoid non-lite-restore preemptions In the current Execlists feeding mechanism, full preemption is not supported yet: only lite-restores are allowed (this is: the GPU simply samples a new tail pointer for the context currently in execution). But we have identified an scenario in which a full preemption occurs: 1) We submit two contexts for execution (A & B). 2) The GPU finishes with the first one (A), switches to the second one (B) and informs us. 3) We submit B again (hoping to cause a lite restore) together with C, but in the time we spend writing to the ELSP, the GPU finishes B. 4) The GPU start executing B again (since we told it so). 5) We receive a B finished interrupt and, mistakenly, we submit C (again) and D, causing a full preemption of B. The race is avoided by keeping track of how many times a context has been submitted to the hardware and by better discriminating the received context switch interrupts: in the example, when we have submitted B twice, we won´t submit C and D as soon as we receive the notification that B is completed because we were expecting to get a LITE_RESTORE and we didn´t, so we know a second completion will be received shortly. Without this explicit checking, somehow, the batch buffer execution order gets messed with. This can be verified with the IGT test I sent together with the series. I don´t know the exact mechanism by which the pre-emption messes with the execution order but, since other people is working on the Scheduler + Preemption on Execlists, I didn´t try to fix it. In these series, only Lite Restores are supported (other kind of preemptions WARN). v2: elsp_submitted belongs in the new intel_ctx_submit_request. Several rebase changes. v3: Clarify how the race is avoided, as requested by Daniel. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Align function parameters ...] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:40 +08:00
if (status & GEN8_CTX_STATUS_PREEMPTED) {
if (status & GEN8_CTX_STATUS_LITE_RESTORE) {
if (execlists_check_remove_request(ring, status_id))
WARN(1, "Lite Restored request removed from queue\n");
} else
WARN(1, "Preemption without Lite Restore\n");
}
if ((status & GEN8_CTX_STATUS_ACTIVE_IDLE) ||
(status & GEN8_CTX_STATUS_ELEMENT_SWITCH)) {
2014-07-25 00:04:39 +08:00
if (execlists_check_remove_request(ring, status_id))
submit_contexts++;
}
}
if (submit_contexts != 0)
execlists_context_unqueue(ring);
spin_unlock(&ring->execlist_lock);
WARN(submit_contexts > 2, "More than two context complete events?\n");
ring->next_context_status_buffer = write_pointer % 6;
I915_WRITE(RING_CONTEXT_STATUS_PTR(ring),
((u32)ring->next_context_status_buffer & 0x07) << 8);
}
static int execlists_context_queue(struct intel_engine_cs *ring,
struct intel_context *to,
u32 tail,
struct drm_i915_gem_request *request)
{
struct drm_i915_gem_request *cursor;
2014-07-25 00:04:39 +08:00
struct drm_i915_private *dev_priv = ring->dev->dev_private;
unsigned long flags;
int num_elements = 0;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
if (to != ring->default_context)
intel_lr_context_pin(ring, to);
if (!request) {
/*
* If there isn't a request associated with this submission,
* create one as a temporary holder.
*/
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (request == NULL)
return -ENOMEM;
request->ring = ring;
request->ctx = to;
kref_init(&request->ref);
request->uniq = dev_priv->request_uniq++;
i915_gem_context_reference(request->ctx);
} else {
i915_gem_request_reference(request);
WARN_ON(to != request->ctx);
}
request->tail = tail;
2014-07-25 00:04:39 +08:00
intel_runtime_pm_get(dev_priv);
spin_lock_irqsave(&ring->execlist_lock, flags);
list_for_each_entry(cursor, &ring->execlist_queue, execlist_link)
if (++num_elements > 2)
break;
if (num_elements > 2) {
struct drm_i915_gem_request *tail_req;
tail_req = list_last_entry(&ring->execlist_queue,
struct drm_i915_gem_request,
execlist_link);
if (to == tail_req->ctx) {
WARN(tail_req->elsp_submitted != 0,
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
"More than 2 already-submitted reqs queued\n");
list_del(&tail_req->execlist_link);
list_add_tail(&tail_req->execlist_link,
&ring->execlist_retired_req_list);
}
}
list_add_tail(&request->execlist_link, &ring->execlist_queue);
if (num_elements == 0)
execlists_context_unqueue(ring);
spin_unlock_irqrestore(&ring->execlist_lock, flags);
return 0;
}
static int logical_ring_invalidate_all_caches(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx)
{
struct intel_engine_cs *ring = ringbuf->ring;
uint32_t flush_domains;
int ret;
flush_domains = 0;
if (ring->gpu_caches_dirty)
flush_domains = I915_GEM_GPU_DOMAINS;
ret = ring->emit_flush(ringbuf, ctx,
I915_GEM_GPU_DOMAINS, flush_domains);
if (ret)
return ret;
ring->gpu_caches_dirty = false;
return 0;
}
static int execlists_move_to_gpu(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx,
struct list_head *vmas)
{
struct intel_engine_cs *ring = ringbuf->ring;
struct i915_vma *vma;
uint32_t flush_domains = 0;
bool flush_chipset = false;
int ret;
list_for_each_entry(vma, vmas, exec_list) {
struct drm_i915_gem_object *obj = vma->obj;
ret = i915_gem_object_sync(obj, ring);
if (ret)
return ret;
if (obj->base.write_domain & I915_GEM_DOMAIN_CPU)
flush_chipset |= i915_gem_clflush_object(obj, false);
flush_domains |= obj->base.write_domain;
}
if (flush_domains & I915_GEM_DOMAIN_GTT)
wmb();
/* Unconditionally invalidate gpu caches and ensure that we do flush
* any residual writes from the previous batch.
*/
return logical_ring_invalidate_all_caches(ringbuf, ctx);
}
/**
* execlists_submission() - submit a batchbuffer for execution, Execlists style
* @dev: DRM device.
* @file: DRM file.
* @ring: Engine Command Streamer to submit to.
* @ctx: Context to employ for this submission.
* @args: execbuffer call arguments.
* @vmas: list of vmas.
* @batch_obj: the batchbuffer to submit.
* @exec_start: batchbuffer start virtual address pointer.
* @dispatch_flags: translated execbuffer call flags.
*
* This is the evil twin version of i915_gem_ringbuffer_submission. It abstracts
* away the submission details of the execbuffer ioctl call.
*
* Return: non-zero if the submission fails.
*/
int intel_execlists_submission(struct drm_device *dev, struct drm_file *file,
struct intel_engine_cs *ring,
struct intel_context *ctx,
struct drm_i915_gem_execbuffer2 *args,
struct list_head *vmas,
struct drm_i915_gem_object *batch_obj,
u64 exec_start, u32 dispatch_flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_ringbuffer *ringbuf = ctx->engine[ring->id].ringbuf;
int instp_mode;
u32 instp_mask;
int ret;
instp_mode = args->flags & I915_EXEC_CONSTANTS_MASK;
instp_mask = I915_EXEC_CONSTANTS_MASK;
switch (instp_mode) {
case I915_EXEC_CONSTANTS_REL_GENERAL:
case I915_EXEC_CONSTANTS_ABSOLUTE:
case I915_EXEC_CONSTANTS_REL_SURFACE:
if (instp_mode != 0 && ring != &dev_priv->ring[RCS]) {
DRM_DEBUG("non-0 rel constants mode on non-RCS\n");
return -EINVAL;
}
if (instp_mode != dev_priv->relative_constants_mode) {
if (instp_mode == I915_EXEC_CONSTANTS_REL_SURFACE) {
DRM_DEBUG("rel surface constants mode invalid on gen5+\n");
return -EINVAL;
}
/* The HW changed the meaning on this bit on gen6 */
instp_mask &= ~I915_EXEC_CONSTANTS_REL_SURFACE;
}
break;
default:
DRM_DEBUG("execbuf with unknown constants: %d\n", instp_mode);
return -EINVAL;
}
if (args->num_cliprects != 0) {
DRM_DEBUG("clip rectangles are only valid on pre-gen5\n");
return -EINVAL;
} else {
if (args->DR4 == 0xffffffff) {
DRM_DEBUG("UXA submitting garbage DR4, fixing up\n");
args->DR4 = 0;
}
if (args->DR1 || args->DR4 || args->cliprects_ptr) {
DRM_DEBUG("0 cliprects but dirt in cliprects fields\n");
return -EINVAL;
}
}
if (args->flags & I915_EXEC_GEN7_SOL_RESET) {
DRM_DEBUG("sol reset is gen7 only\n");
return -EINVAL;
}
ret = execlists_move_to_gpu(ringbuf, ctx, vmas);
if (ret)
return ret;
if (ring == &dev_priv->ring[RCS] &&
instp_mode != dev_priv->relative_constants_mode) {
ret = intel_logical_ring_begin(ringbuf, ctx, 4);
if (ret)
return ret;
intel_logical_ring_emit(ringbuf, MI_NOOP);
intel_logical_ring_emit(ringbuf, MI_LOAD_REGISTER_IMM(1));
intel_logical_ring_emit(ringbuf, INSTPM);
intel_logical_ring_emit(ringbuf, instp_mask << 16 | instp_mode);
intel_logical_ring_advance(ringbuf);
dev_priv->relative_constants_mode = instp_mode;
}
ret = ring->emit_bb_start(ringbuf, ctx, exec_start, dispatch_flags);
if (ret)
return ret;
trace_i915_gem_ring_dispatch(intel_ring_get_request(ring), dispatch_flags);
i915_gem_execbuffer_move_to_active(vmas, ring);
i915_gem_execbuffer_retire_commands(dev, file, ring, batch_obj);
return 0;
}
void intel_execlists_retire_requests(struct intel_engine_cs *ring)
{
struct drm_i915_gem_request *req, *tmp;
struct drm_i915_private *dev_priv = ring->dev->dev_private;
unsigned long flags;
struct list_head retired_list;
WARN_ON(!mutex_is_locked(&ring->dev->struct_mutex));
if (list_empty(&ring->execlist_retired_req_list))
return;
INIT_LIST_HEAD(&retired_list);
spin_lock_irqsave(&ring->execlist_lock, flags);
list_replace_init(&ring->execlist_retired_req_list, &retired_list);
spin_unlock_irqrestore(&ring->execlist_lock, flags);
list_for_each_entry_safe(req, tmp, &retired_list, execlist_link) {
struct intel_context *ctx = req->ctx;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
struct drm_i915_gem_object *ctx_obj =
ctx->engine[ring->id].state;
if (ctx_obj && (ctx != ring->default_context))
intel_lr_context_unpin(ring, ctx);
intel_runtime_pm_put(dev_priv);
list_del(&req->execlist_link);
i915_gem_request_unreference(req);
}
}
void intel_logical_ring_stop(struct intel_engine_cs *ring)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
int ret;
if (!intel_ring_initialized(ring))
return;
ret = intel_ring_idle(ring);
if (ret && !i915_reset_in_progress(&to_i915(ring->dev)->gpu_error))
DRM_ERROR("failed to quiesce %s whilst cleaning up: %d\n",
ring->name, ret);
/* TODO: Is this correct with Execlists enabled? */
I915_WRITE_MODE(ring, _MASKED_BIT_ENABLE(STOP_RING));
if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000)) {
DRM_ERROR("%s :timed out trying to stop ring\n", ring->name);
return;
}
I915_WRITE_MODE(ring, _MASKED_BIT_DISABLE(STOP_RING));
}
int logical_ring_flush_all_caches(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx)
{
struct intel_engine_cs *ring = ringbuf->ring;
int ret;
if (!ring->gpu_caches_dirty)
return 0;
ret = ring->emit_flush(ringbuf, ctx, 0, I915_GEM_GPU_DOMAINS);
if (ret)
return ret;
ring->gpu_caches_dirty = false;
return 0;
}
/*
* intel_logical_ring_advance_and_submit() - advance the tail and submit the workload
* @ringbuf: Logical Ringbuffer to advance.
*
* The tail is updated in our logical ringbuffer struct, not in the actual context. What
* really happens during submission is that the context and current tail will be placed
* on a queue waiting for the ELSP to be ready to accept a new context submission. At that
* point, the tail *inside* the context is updated and the ELSP written to.
*/
static void
intel_logical_ring_advance_and_submit(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx,
struct drm_i915_gem_request *request)
{
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
struct intel_engine_cs *ring = ringbuf->ring;
intel_logical_ring_advance(ringbuf);
drm/i915/bdw: Implement context switching (somewhat) A context switch occurs by submitting a context descriptor to the ExecList Submission Port. Given that we can now initialize a context, it's possible to begin implementing the context switch by creating the descriptor and submitting it to ELSP (actually two, since the ELSP has two ports). The context object must be mapped in the GGTT, which means it must exist in the 0-4GB graphics VA range. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> v2: This code has changed quite a lot in various rebases. Of particular importance is that now we use the globally unique Submission ID to send to the hardware. Also, context pages are now pinned unconditionally to GGTT, so there is no need to bind them. v3: Use LRCA[31:12] as hwCtxId[19:0]. This guarantees that the HW context ID we submit to the ELSP is globally unique and != 0 (Bspec requirements of the software use-only bits of the Context ID in the Context Descriptor Format) without the hassle of the previous submission Id construction. Also, re-add the ELSP porting read (it was dropped somewhere during the rebases). v4: - Squash with "drm/i915/bdw: Add forcewake lock around ELSP writes" (BSPEC says: "SW must set Force Wakeup bit to prevent GT from entering C6 while ELSP writes are in progress") as noted by Thomas Daniel (thomas.daniel@intel.com). - Rename functions and use an execlists/intel_execlists_ namespace. - The BUG_ON only checked that the LRCA was <32 bits, but it didn't make sure that it was properly aligned. Spotted by Alistair Mcaulay <alistair.mcaulay@intel.com>. v5: - Improved source code comments as suggested by Chris Wilson. - No need to abstract submit_ctx away, as pointed by Brad Volkin. Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Checkpatch. Sigh.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:36 +08:00
if (intel_ring_stopped(ring))
return;
execlists_context_queue(ring, ctx, ringbuf->tail, request);
}
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
static int intel_lr_context_pin(struct intel_engine_cs *ring,
struct intel_context *ctx)
{
struct drm_i915_gem_object *ctx_obj = ctx->engine[ring->id].state;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
struct intel_ringbuffer *ringbuf = ctx->engine[ring->id].ringbuf;
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
int ret = 0;
WARN_ON(!mutex_is_locked(&ring->dev->struct_mutex));
if (ctx->engine[ring->id].pin_count++ == 0) {
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
ret = i915_gem_obj_ggtt_pin(ctx_obj,
GEN8_LR_CONTEXT_ALIGN, 0);
if (ret)
goto reset_pin_count;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
ret = intel_pin_and_map_ringbuffer_obj(ring->dev, ringbuf);
if (ret)
goto unpin_ctx_obj;
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
}
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
return ret;
unpin_ctx_obj:
i915_gem_object_ggtt_unpin(ctx_obj);
reset_pin_count:
ctx->engine[ring->id].pin_count = 0;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
return ret;
}
void intel_lr_context_unpin(struct intel_engine_cs *ring,
struct intel_context *ctx)
{
struct drm_i915_gem_object *ctx_obj = ctx->engine[ring->id].state;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
struct intel_ringbuffer *ringbuf = ctx->engine[ring->id].ringbuf;
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
if (ctx_obj) {
WARN_ON(!mutex_is_locked(&ring->dev->struct_mutex));
if (--ctx->engine[ring->id].pin_count == 0) {
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
intel_unpin_ringbuffer_obj(ringbuf);
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
i915_gem_object_ggtt_unpin(ctx_obj);
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
}
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
}
}
static int logical_ring_alloc_request(struct intel_engine_cs *ring,
struct intel_context *ctx)
{
struct drm_i915_gem_request *request;
struct drm_i915_private *dev_private = ring->dev->dev_private;
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
int ret;
if (ring->outstanding_lazy_request)
return 0;
request = kzalloc(sizeof(*request), GFP_KERNEL);
if (request == NULL)
return -ENOMEM;
if (ctx != ring->default_context) {
ret = intel_lr_context_pin(ring, ctx);
if (ret) {
kfree(request);
return ret;
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
}
}
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
kref_init(&request->ref);
request->ring = ring;
request->uniq = dev_private->request_uniq++;
ret = i915_gem_get_seqno(ring->dev, &request->seqno);
if (ret) {
intel_lr_context_unpin(ring, ctx);
kfree(request);
return ret;
}
request->ctx = ctx;
i915_gem_context_reference(request->ctx);
request->ringbuf = ctx->engine[ring->id].ringbuf;
ring->outstanding_lazy_request = request;
return 0;
}
static int logical_ring_wait_request(struct intel_ringbuffer *ringbuf,
int bytes)
{
struct intel_engine_cs *ring = ringbuf->ring;
struct drm_i915_gem_request *request;
int ret;
if (intel_ring_space(ringbuf) >= bytes)
return 0;
list_for_each_entry(request, &ring->request_list, list) {
/*
* The request queue is per-engine, so can contain requests
* from multiple ringbuffers. Here, we must ignore any that
* aren't from the ringbuffer we're considering.
*/
struct intel_context *ctx = request->ctx;
if (ctx->engine[ring->id].ringbuf != ringbuf)
continue;
/* Would completion of this request free enough space? */
if (__intel_ring_space(request->tail, ringbuf->tail,
ringbuf->size) >= bytes) {
break;
}
}
if (&request->list == &ring->request_list)
return -ENOSPC;
ret = i915_wait_request(request);
if (ret)
return ret;
i915_gem_retire_requests_ring(ring);
return intel_ring_space(ringbuf) >= bytes ? 0 : -ENOSPC;
}
static int logical_ring_wait_for_space(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx,
int bytes)
{
struct intel_engine_cs *ring = ringbuf->ring;
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long end;
int ret;
ret = logical_ring_wait_request(ringbuf, bytes);
if (ret != -ENOSPC)
return ret;
/* Force the context submission in case we have been skipping it */
intel_logical_ring_advance_and_submit(ringbuf, ctx, NULL);
/* With GEM the hangcheck timer should kick us out of the loop,
* leaving it early runs the risk of corrupting GEM state (due
* to running on almost untested codepaths). But on resume
* timers don't work yet, so prevent a complete hang in that
* case by choosing an insanely large timeout. */
end = jiffies + 60 * HZ;
ret = 0;
do {
if (intel_ring_space(ringbuf) >= bytes)
break;
msleep(1);
if (dev_priv->mm.interruptible && signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
ret = i915_gem_check_wedge(&dev_priv->gpu_error,
dev_priv->mm.interruptible);
if (ret)
break;
if (time_after(jiffies, end)) {
ret = -EBUSY;
break;
}
} while (1);
return ret;
}
static int logical_ring_wrap_buffer(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx)
{
uint32_t __iomem *virt;
int rem = ringbuf->size - ringbuf->tail;
if (ringbuf->space < rem) {
int ret = logical_ring_wait_for_space(ringbuf, ctx, rem);
if (ret)
return ret;
}
virt = ringbuf->virtual_start + ringbuf->tail;
rem /= 4;
while (rem--)
iowrite32(MI_NOOP, virt++);
ringbuf->tail = 0;
intel_ring_update_space(ringbuf);
return 0;
}
static int logical_ring_prepare(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx, int bytes)
{
int ret;
if (unlikely(ringbuf->tail + bytes > ringbuf->effective_size)) {
ret = logical_ring_wrap_buffer(ringbuf, ctx);
if (unlikely(ret))
return ret;
}
if (unlikely(ringbuf->space < bytes)) {
ret = logical_ring_wait_for_space(ringbuf, ctx, bytes);
if (unlikely(ret))
return ret;
}
return 0;
}
/**
* intel_logical_ring_begin() - prepare the logical ringbuffer to accept some commands
*
* @ringbuf: Logical ringbuffer.
* @num_dwords: number of DWORDs that we plan to write to the ringbuffer.
*
* The ringbuffer might not be ready to accept the commands right away (maybe it needs to
* be wrapped, or wait a bit for the tail to be updated). This function takes care of that
* and also preallocates a request (every workload submission is still mediated through
* requests, same as it did with legacy ringbuffer submission).
*
* Return: non-zero if the ringbuffer is not ready to be written to.
*/
int intel_logical_ring_begin(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx, int num_dwords)
{
struct intel_engine_cs *ring = ringbuf->ring;
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
ret = i915_gem_check_wedge(&dev_priv->gpu_error,
dev_priv->mm.interruptible);
if (ret)
return ret;
ret = logical_ring_prepare(ringbuf, ctx, num_dwords * sizeof(uint32_t));
if (ret)
return ret;
/* Preallocate the olr before touching the ring */
ret = logical_ring_alloc_request(ring, ctx);
if (ret)
return ret;
ringbuf->space -= num_dwords * sizeof(uint32_t);
return 0;
}
static int intel_logical_ring_workarounds_emit(struct intel_engine_cs *ring,
struct intel_context *ctx)
{
int ret, i;
struct intel_ringbuffer *ringbuf = ctx->engine[ring->id].ringbuf;
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct i915_workarounds *w = &dev_priv->workarounds;
if (WARN_ON_ONCE(w->count == 0))
return 0;
ring->gpu_caches_dirty = true;
ret = logical_ring_flush_all_caches(ringbuf, ctx);
if (ret)
return ret;
ret = intel_logical_ring_begin(ringbuf, ctx, w->count * 2 + 2);
if (ret)
return ret;
intel_logical_ring_emit(ringbuf, MI_LOAD_REGISTER_IMM(w->count));
for (i = 0; i < w->count; i++) {
intel_logical_ring_emit(ringbuf, w->reg[i].addr);
intel_logical_ring_emit(ringbuf, w->reg[i].value);
}
intel_logical_ring_emit(ringbuf, MI_NOOP);
intel_logical_ring_advance(ringbuf);
ring->gpu_caches_dirty = true;
ret = logical_ring_flush_all_caches(ringbuf, ctx);
if (ret)
return ret;
return 0;
}
static int gen8_init_common_ring(struct intel_engine_cs *ring)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE_IMR(ring, ~(ring->irq_enable_mask | ring->irq_keep_mask));
I915_WRITE(RING_HWSTAM(ring->mmio_base), 0xffffffff);
I915_WRITE(RING_MODE_GEN7(ring),
_MASKED_BIT_DISABLE(GFX_REPLAY_MODE) |
_MASKED_BIT_ENABLE(GFX_RUN_LIST_ENABLE));
POSTING_READ(RING_MODE_GEN7(ring));
2015-01-09 19:09:37 +08:00
ring->next_context_status_buffer = 0;
DRM_DEBUG_DRIVER("Execlists enabled for %s\n", ring->name);
memset(&ring->hangcheck, 0, sizeof(ring->hangcheck));
return 0;
}
static int gen8_init_render_ring(struct intel_engine_cs *ring)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
ret = gen8_init_common_ring(ring);
if (ret)
return ret;
/* We need to disable the AsyncFlip performance optimisations in order
* to use MI_WAIT_FOR_EVENT within the CS. It should already be
* programmed to '1' on all products.
*
* WaDisableAsyncFlipPerfMode:snb,ivb,hsw,vlv,bdw,chv
*/
I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE));
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_FORCE_ORDERING));
return init_workarounds_ring(ring);
}
static int gen9_init_render_ring(struct intel_engine_cs *ring)
{
int ret;
ret = gen8_init_common_ring(ring);
if (ret)
return ret;
return init_workarounds_ring(ring);
}
static int gen8_emit_bb_start(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx,
u64 offset, unsigned dispatch_flags)
{
bool ppgtt = !(dispatch_flags & I915_DISPATCH_SECURE);
int ret;
ret = intel_logical_ring_begin(ringbuf, ctx, 4);
if (ret)
return ret;
/* FIXME(BDW): Address space and security selectors. */
intel_logical_ring_emit(ringbuf, MI_BATCH_BUFFER_START_GEN8 | (ppgtt<<8));
intel_logical_ring_emit(ringbuf, lower_32_bits(offset));
intel_logical_ring_emit(ringbuf, upper_32_bits(offset));
intel_logical_ring_emit(ringbuf, MI_NOOP);
intel_logical_ring_advance(ringbuf);
return 0;
}
static bool gen8_logical_ring_get_irq(struct intel_engine_cs *ring)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long flags;
if (WARN_ON(!intel_irqs_enabled(dev_priv)))
return false;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (ring->irq_refcount++ == 0) {
I915_WRITE_IMR(ring, ~(ring->irq_enable_mask | ring->irq_keep_mask));
POSTING_READ(RING_IMR(ring->mmio_base));
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return true;
}
static void gen8_logical_ring_put_irq(struct intel_engine_cs *ring)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long flags;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (--ring->irq_refcount == 0) {
I915_WRITE_IMR(ring, ~ring->irq_keep_mask);
POSTING_READ(RING_IMR(ring->mmio_base));
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
}
static int gen8_emit_flush(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx,
u32 invalidate_domains,
u32 unused)
{
struct intel_engine_cs *ring = ringbuf->ring;
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t cmd;
int ret;
ret = intel_logical_ring_begin(ringbuf, ctx, 4);
if (ret)
return ret;
cmd = MI_FLUSH_DW + 1;
/* We always require a command barrier so that subsequent
* commands, such as breadcrumb interrupts, are strictly ordered
* wrt the contents of the write cache being flushed to memory
* (and thus being coherent from the CPU).
*/
cmd |= MI_FLUSH_DW_STORE_INDEX | MI_FLUSH_DW_OP_STOREDW;
if (invalidate_domains & I915_GEM_GPU_DOMAINS) {
cmd |= MI_INVALIDATE_TLB;
if (ring == &dev_priv->ring[VCS])
cmd |= MI_INVALIDATE_BSD;
}
intel_logical_ring_emit(ringbuf, cmd);
intel_logical_ring_emit(ringbuf,
I915_GEM_HWS_SCRATCH_ADDR |
MI_FLUSH_DW_USE_GTT);
intel_logical_ring_emit(ringbuf, 0); /* upper addr */
intel_logical_ring_emit(ringbuf, 0); /* value */
intel_logical_ring_advance(ringbuf);
return 0;
}
static int gen8_emit_flush_render(struct intel_ringbuffer *ringbuf,
struct intel_context *ctx,
u32 invalidate_domains,
u32 flush_domains)
{
struct intel_engine_cs *ring = ringbuf->ring;
u32 scratch_addr = ring->scratch.gtt_offset + 2 * CACHELINE_BYTES;
u32 flags = 0;
int ret;
flags |= PIPE_CONTROL_CS_STALL;
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_QW_WRITE;
flags |= PIPE_CONTROL_GLOBAL_GTT_IVB;
}
ret = intel_logical_ring_begin(ringbuf, ctx, 6);
if (ret)
return ret;
intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(6));
intel_logical_ring_emit(ringbuf, flags);
intel_logical_ring_emit(ringbuf, scratch_addr);
intel_logical_ring_emit(ringbuf, 0);
intel_logical_ring_emit(ringbuf, 0);
intel_logical_ring_emit(ringbuf, 0);
intel_logical_ring_advance(ringbuf);
return 0;
}
static u32 gen8_get_seqno(struct intel_engine_cs *ring, bool lazy_coherency)
{
return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
}
static void gen8_set_seqno(struct intel_engine_cs *ring, u32 seqno)
{
intel_write_status_page(ring, I915_GEM_HWS_INDEX, seqno);
}
static int gen8_emit_request(struct intel_ringbuffer *ringbuf,
struct drm_i915_gem_request *request)
{
struct intel_engine_cs *ring = ringbuf->ring;
u32 cmd;
int ret;
ret = intel_logical_ring_begin(ringbuf, request->ctx, 6);
if (ret)
return ret;
cmd = MI_STORE_DWORD_IMM_GEN4;
cmd |= MI_GLOBAL_GTT;
intel_logical_ring_emit(ringbuf, cmd);
intel_logical_ring_emit(ringbuf,
(ring->status_page.gfx_addr +
(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT)));
intel_logical_ring_emit(ringbuf, 0);
intel_logical_ring_emit(ringbuf,
i915_gem_request_get_seqno(ring->outstanding_lazy_request));
intel_logical_ring_emit(ringbuf, MI_USER_INTERRUPT);
intel_logical_ring_emit(ringbuf, MI_NOOP);
intel_logical_ring_advance_and_submit(ringbuf, request->ctx, request);
return 0;
}
static int intel_lr_context_render_state_init(struct intel_engine_cs *ring,
struct intel_context *ctx)
{
struct intel_ringbuffer *ringbuf = ctx->engine[ring->id].ringbuf;
struct render_state so;
struct drm_i915_file_private *file_priv = ctx->file_priv;
struct drm_file *file = file_priv ? file_priv->file : NULL;
int ret;
ret = i915_gem_render_state_prepare(ring, &so);
if (ret)
return ret;
if (so.rodata == NULL)
return 0;
ret = ring->emit_bb_start(ringbuf,
ctx,
so.ggtt_offset,
I915_DISPATCH_SECURE);
if (ret)
goto out;
i915_vma_move_to_active(i915_gem_obj_to_ggtt(so.obj), ring);
ret = __i915_add_request(ring, file, so.obj);
/* intel_logical_ring_add_request moves object to inactive if it
* fails */
out:
i915_gem_render_state_fini(&so);
return ret;
}
static int gen8_init_rcs_context(struct intel_engine_cs *ring,
struct intel_context *ctx)
{
int ret;
ret = intel_logical_ring_workarounds_emit(ring, ctx);
if (ret)
return ret;
return intel_lr_context_render_state_init(ring, ctx);
}
/**
* intel_logical_ring_cleanup() - deallocate the Engine Command Streamer
*
* @ring: Engine Command Streamer.
*
*/
void intel_logical_ring_cleanup(struct intel_engine_cs *ring)
{
struct drm_i915_private *dev_priv;
if (!intel_ring_initialized(ring))
return;
dev_priv = ring->dev->dev_private;
intel_logical_ring_stop(ring);
WARN_ON((I915_READ_MODE(ring) & MODE_IDLE) == 0);
i915_gem_request_assign(&ring->outstanding_lazy_request, NULL);
if (ring->cleanup)
ring->cleanup(ring);
i915_cmd_parser_fini_ring(ring);
if (ring->status_page.obj) {
kunmap(sg_page(ring->status_page.obj->pages->sgl));
ring->status_page.obj = NULL;
}
}
static int logical_ring_init(struct drm_device *dev, struct intel_engine_cs *ring)
{
int ret;
/* Intentionally left blank. */
ring->buffer = NULL;
ring->dev = dev;
INIT_LIST_HEAD(&ring->active_list);
INIT_LIST_HEAD(&ring->request_list);
init_waitqueue_head(&ring->irq_queue);
INIT_LIST_HEAD(&ring->execlist_queue);
INIT_LIST_HEAD(&ring->execlist_retired_req_list);
spin_lock_init(&ring->execlist_lock);
ret = i915_cmd_parser_init_ring(ring);
if (ret)
return ret;
ret = intel_lr_context_deferred_create(ring->default_context, ring);
return ret;
}
static int logical_render_ring_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring = &dev_priv->ring[RCS];
int ret;
ring->name = "render ring";
ring->id = RCS;
ring->mmio_base = RENDER_RING_BASE;
ring->irq_enable_mask =
GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT;
ring->irq_keep_mask =
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_RCS_IRQ_SHIFT;
if (HAS_L3_DPF(dev))
ring->irq_keep_mask |= GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
if (INTEL_INFO(dev)->gen >= 9)
ring->init_hw = gen9_init_render_ring;
else
ring->init_hw = gen8_init_render_ring;
ring->init_context = gen8_init_rcs_context;
ring->cleanup = intel_fini_pipe_control;
ring->get_seqno = gen8_get_seqno;
ring->set_seqno = gen8_set_seqno;
ring->emit_request = gen8_emit_request;
ring->emit_flush = gen8_emit_flush_render;
ring->irq_get = gen8_logical_ring_get_irq;
ring->irq_put = gen8_logical_ring_put_irq;
ring->emit_bb_start = gen8_emit_bb_start;
ring->dev = dev;
ret = logical_ring_init(dev, ring);
if (ret)
return ret;
return intel_init_pipe_control(ring);
}
static int logical_bsd_ring_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring = &dev_priv->ring[VCS];
ring->name = "bsd ring";
ring->id = VCS;
ring->mmio_base = GEN6_BSD_RING_BASE;
ring->irq_enable_mask =
GT_RENDER_USER_INTERRUPT << GEN8_VCS1_IRQ_SHIFT;
ring->irq_keep_mask =
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS1_IRQ_SHIFT;
ring->init_hw = gen8_init_common_ring;
ring->get_seqno = gen8_get_seqno;
ring->set_seqno = gen8_set_seqno;
ring->emit_request = gen8_emit_request;
ring->emit_flush = gen8_emit_flush;
ring->irq_get = gen8_logical_ring_get_irq;
ring->irq_put = gen8_logical_ring_put_irq;
ring->emit_bb_start = gen8_emit_bb_start;
return logical_ring_init(dev, ring);
}
static int logical_bsd2_ring_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring = &dev_priv->ring[VCS2];
ring->name = "bds2 ring";
ring->id = VCS2;
ring->mmio_base = GEN8_BSD2_RING_BASE;
ring->irq_enable_mask =
GT_RENDER_USER_INTERRUPT << GEN8_VCS2_IRQ_SHIFT;
ring->irq_keep_mask =
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS2_IRQ_SHIFT;
ring->init_hw = gen8_init_common_ring;
ring->get_seqno = gen8_get_seqno;
ring->set_seqno = gen8_set_seqno;
ring->emit_request = gen8_emit_request;
ring->emit_flush = gen8_emit_flush;
ring->irq_get = gen8_logical_ring_get_irq;
ring->irq_put = gen8_logical_ring_put_irq;
ring->emit_bb_start = gen8_emit_bb_start;
return logical_ring_init(dev, ring);
}
static int logical_blt_ring_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring = &dev_priv->ring[BCS];
ring->name = "blitter ring";
ring->id = BCS;
ring->mmio_base = BLT_RING_BASE;
ring->irq_enable_mask =
GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
ring->irq_keep_mask =
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
ring->init_hw = gen8_init_common_ring;
ring->get_seqno = gen8_get_seqno;
ring->set_seqno = gen8_set_seqno;
ring->emit_request = gen8_emit_request;
ring->emit_flush = gen8_emit_flush;
ring->irq_get = gen8_logical_ring_get_irq;
ring->irq_put = gen8_logical_ring_put_irq;
ring->emit_bb_start = gen8_emit_bb_start;
return logical_ring_init(dev, ring);
}
static int logical_vebox_ring_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring = &dev_priv->ring[VECS];
ring->name = "video enhancement ring";
ring->id = VECS;
ring->mmio_base = VEBOX_RING_BASE;
ring->irq_enable_mask =
GT_RENDER_USER_INTERRUPT << GEN8_VECS_IRQ_SHIFT;
ring->irq_keep_mask =
GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VECS_IRQ_SHIFT;
ring->init_hw = gen8_init_common_ring;
ring->get_seqno = gen8_get_seqno;
ring->set_seqno = gen8_set_seqno;
ring->emit_request = gen8_emit_request;
ring->emit_flush = gen8_emit_flush;
ring->irq_get = gen8_logical_ring_get_irq;
ring->irq_put = gen8_logical_ring_put_irq;
ring->emit_bb_start = gen8_emit_bb_start;
return logical_ring_init(dev, ring);
}
/**
* intel_logical_rings_init() - allocate, populate and init the Engine Command Streamers
* @dev: DRM device.
*
* This function inits the engines for an Execlists submission style (the equivalent in the
* legacy ringbuffer submission world would be i915_gem_init_rings). It does it only for
* those engines that are present in the hardware.
*
* Return: non-zero if the initialization failed.
*/
int intel_logical_rings_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
ret = logical_render_ring_init(dev);
if (ret)
return ret;
if (HAS_BSD(dev)) {
ret = logical_bsd_ring_init(dev);
if (ret)
goto cleanup_render_ring;
}
if (HAS_BLT(dev)) {
ret = logical_blt_ring_init(dev);
if (ret)
goto cleanup_bsd_ring;
}
if (HAS_VEBOX(dev)) {
ret = logical_vebox_ring_init(dev);
if (ret)
goto cleanup_blt_ring;
}
if (HAS_BSD2(dev)) {
ret = logical_bsd2_ring_init(dev);
if (ret)
goto cleanup_vebox_ring;
}
ret = i915_gem_set_seqno(dev, ((u32)~0 - 0x1000));
if (ret)
goto cleanup_bsd2_ring;
return 0;
cleanup_bsd2_ring:
intel_logical_ring_cleanup(&dev_priv->ring[VCS2]);
cleanup_vebox_ring:
intel_logical_ring_cleanup(&dev_priv->ring[VECS]);
cleanup_blt_ring:
intel_logical_ring_cleanup(&dev_priv->ring[BCS]);
cleanup_bsd_ring:
intel_logical_ring_cleanup(&dev_priv->ring[VCS]);
cleanup_render_ring:
intel_logical_ring_cleanup(&dev_priv->ring[RCS]);
return ret;
}
static u32
make_rpcs(struct drm_device *dev)
{
u32 rpcs = 0;
/*
* No explicit RPCS request is needed to ensure full
* slice/subslice/EU enablement prior to Gen9.
*/
if (INTEL_INFO(dev)->gen < 9)
return 0;
/*
* Starting in Gen9, render power gating can leave
* slice/subslice/EU in a partially enabled state. We
* must make an explicit request through RPCS for full
* enablement.
*/
if (INTEL_INFO(dev)->has_slice_pg) {
rpcs |= GEN8_RPCS_S_CNT_ENABLE;
rpcs |= INTEL_INFO(dev)->slice_total <<
GEN8_RPCS_S_CNT_SHIFT;
rpcs |= GEN8_RPCS_ENABLE;
}
if (INTEL_INFO(dev)->has_subslice_pg) {
rpcs |= GEN8_RPCS_SS_CNT_ENABLE;
rpcs |= INTEL_INFO(dev)->subslice_per_slice <<
GEN8_RPCS_SS_CNT_SHIFT;
rpcs |= GEN8_RPCS_ENABLE;
}
if (INTEL_INFO(dev)->has_eu_pg) {
rpcs |= INTEL_INFO(dev)->eu_per_subslice <<
GEN8_RPCS_EU_MIN_SHIFT;
rpcs |= INTEL_INFO(dev)->eu_per_subslice <<
GEN8_RPCS_EU_MAX_SHIFT;
rpcs |= GEN8_RPCS_ENABLE;
}
return rpcs;
}
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
static int
populate_lr_context(struct intel_context *ctx, struct drm_i915_gem_object *ctx_obj,
struct intel_engine_cs *ring, struct intel_ringbuffer *ringbuf)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct i915_hw_ppgtt *ppgtt = ctx->ppgtt;
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
struct page *page;
uint32_t *reg_state;
int ret;
if (!ppgtt)
ppgtt = dev_priv->mm.aliasing_ppgtt;
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
ret = i915_gem_object_set_to_cpu_domain(ctx_obj, true);
if (ret) {
DRM_DEBUG_DRIVER("Could not set to CPU domain\n");
return ret;
}
ret = i915_gem_object_get_pages(ctx_obj);
if (ret) {
DRM_DEBUG_DRIVER("Could not get object pages\n");
return ret;
}
i915_gem_object_pin_pages(ctx_obj);
/* The second page of the context object contains some fields which must
* be set up prior to the first execution. */
page = i915_gem_object_get_page(ctx_obj, 1);
reg_state = kmap_atomic(page);
/* A context is actually a big batch buffer with several MI_LOAD_REGISTER_IMM
* commands followed by (reg, value) pairs. The values we are setting here are
* only for the first context restore: on a subsequent save, the GPU will
* recreate this batchbuffer with new values (including all the missing
* MI_LOAD_REGISTER_IMM commands that we are not initializing here). */
if (ring->id == RCS)
reg_state[CTX_LRI_HEADER_0] = MI_LOAD_REGISTER_IMM(14);
else
reg_state[CTX_LRI_HEADER_0] = MI_LOAD_REGISTER_IMM(11);
reg_state[CTX_LRI_HEADER_0] |= MI_LRI_FORCE_POSTED;
reg_state[CTX_CONTEXT_CONTROL] = RING_CONTEXT_CONTROL(ring);
reg_state[CTX_CONTEXT_CONTROL+1] =
_MASKED_BIT_ENABLE(CTX_CTRL_INHIBIT_SYN_CTX_SWITCH |
CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT);
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
reg_state[CTX_RING_HEAD] = RING_HEAD(ring->mmio_base);
reg_state[CTX_RING_HEAD+1] = 0;
reg_state[CTX_RING_TAIL] = RING_TAIL(ring->mmio_base);
reg_state[CTX_RING_TAIL+1] = 0;
reg_state[CTX_RING_BUFFER_START] = RING_START(ring->mmio_base);
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
/* Ring buffer start address is not known until the buffer is pinned.
* It is written to the context image in execlists_update_context()
*/
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
reg_state[CTX_RING_BUFFER_CONTROL] = RING_CTL(ring->mmio_base);
reg_state[CTX_RING_BUFFER_CONTROL+1] =
((ringbuf->size - PAGE_SIZE) & RING_NR_PAGES) | RING_VALID;
reg_state[CTX_BB_HEAD_U] = ring->mmio_base + 0x168;
reg_state[CTX_BB_HEAD_U+1] = 0;
reg_state[CTX_BB_HEAD_L] = ring->mmio_base + 0x140;
reg_state[CTX_BB_HEAD_L+1] = 0;
reg_state[CTX_BB_STATE] = ring->mmio_base + 0x110;
reg_state[CTX_BB_STATE+1] = (1<<5);
reg_state[CTX_SECOND_BB_HEAD_U] = ring->mmio_base + 0x11c;
reg_state[CTX_SECOND_BB_HEAD_U+1] = 0;
reg_state[CTX_SECOND_BB_HEAD_L] = ring->mmio_base + 0x114;
reg_state[CTX_SECOND_BB_HEAD_L+1] = 0;
reg_state[CTX_SECOND_BB_STATE] = ring->mmio_base + 0x118;
reg_state[CTX_SECOND_BB_STATE+1] = 0;
if (ring->id == RCS) {
/* TODO: according to BSpec, the register state context
* for CHV does not have these. OTOH, these registers do
* exist in CHV. I'm waiting for a clarification */
reg_state[CTX_BB_PER_CTX_PTR] = ring->mmio_base + 0x1c0;
reg_state[CTX_BB_PER_CTX_PTR+1] = 0;
reg_state[CTX_RCS_INDIRECT_CTX] = ring->mmio_base + 0x1c4;
reg_state[CTX_RCS_INDIRECT_CTX+1] = 0;
reg_state[CTX_RCS_INDIRECT_CTX_OFFSET] = ring->mmio_base + 0x1c8;
reg_state[CTX_RCS_INDIRECT_CTX_OFFSET+1] = 0;
}
reg_state[CTX_LRI_HEADER_1] = MI_LOAD_REGISTER_IMM(9);
reg_state[CTX_LRI_HEADER_1] |= MI_LRI_FORCE_POSTED;
reg_state[CTX_CTX_TIMESTAMP] = ring->mmio_base + 0x3a8;
reg_state[CTX_CTX_TIMESTAMP+1] = 0;
reg_state[CTX_PDP3_UDW] = GEN8_RING_PDP_UDW(ring, 3);
reg_state[CTX_PDP3_LDW] = GEN8_RING_PDP_LDW(ring, 3);
reg_state[CTX_PDP2_UDW] = GEN8_RING_PDP_UDW(ring, 2);
reg_state[CTX_PDP2_LDW] = GEN8_RING_PDP_LDW(ring, 2);
reg_state[CTX_PDP1_UDW] = GEN8_RING_PDP_UDW(ring, 1);
reg_state[CTX_PDP1_LDW] = GEN8_RING_PDP_LDW(ring, 1);
reg_state[CTX_PDP0_UDW] = GEN8_RING_PDP_UDW(ring, 0);
reg_state[CTX_PDP0_LDW] = GEN8_RING_PDP_LDW(ring, 0);
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 00:22:36 +08:00
reg_state[CTX_PDP3_UDW+1] = upper_32_bits(ppgtt->pdp.page_directory[3]->daddr);
reg_state[CTX_PDP3_LDW+1] = lower_32_bits(ppgtt->pdp.page_directory[3]->daddr);
reg_state[CTX_PDP2_UDW+1] = upper_32_bits(ppgtt->pdp.page_directory[2]->daddr);
reg_state[CTX_PDP2_LDW+1] = lower_32_bits(ppgtt->pdp.page_directory[2]->daddr);
reg_state[CTX_PDP1_UDW+1] = upper_32_bits(ppgtt->pdp.page_directory[1]->daddr);
reg_state[CTX_PDP1_LDW+1] = lower_32_bits(ppgtt->pdp.page_directory[1]->daddr);
reg_state[CTX_PDP0_UDW+1] = upper_32_bits(ppgtt->pdp.page_directory[0]->daddr);
reg_state[CTX_PDP0_LDW+1] = lower_32_bits(ppgtt->pdp.page_directory[0]->daddr);
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
if (ring->id == RCS) {
reg_state[CTX_LRI_HEADER_2] = MI_LOAD_REGISTER_IMM(1);
reg_state[CTX_R_PWR_CLK_STATE] = GEN8_R_PWR_CLK_STATE;
reg_state[CTX_R_PWR_CLK_STATE+1] = make_rpcs(dev);
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
}
kunmap_atomic(reg_state);
ctx_obj->dirty = 1;
set_page_dirty(page);
i915_gem_object_unpin_pages(ctx_obj);
return 0;
}
/**
* intel_lr_context_free() - free the LRC specific bits of a context
* @ctx: the LR context to free.
*
* The real context freeing is done in i915_gem_context_free: this only
* takes care of the bits that are LRC related: the per-engine backing
* objects and the logical ringbuffer.
*/
void intel_lr_context_free(struct intel_context *ctx)
{
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
int i;
for (i = 0; i < I915_NUM_RINGS; i++) {
struct drm_i915_gem_object *ctx_obj = ctx->engine[i].state;
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
if (ctx_obj) {
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
struct intel_ringbuffer *ringbuf =
ctx->engine[i].ringbuf;
struct intel_engine_cs *ring = ringbuf->ring;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
if (ctx == ring->default_context) {
intel_unpin_ringbuffer_obj(ringbuf);
i915_gem_object_ggtt_unpin(ctx_obj);
}
WARN_ON(ctx->engine[ring->id].pin_count);
intel_destroy_ringbuffer_obj(ringbuf);
kfree(ringbuf);
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
drm_gem_object_unreference(&ctx_obj->base);
}
}
}
static uint32_t get_lr_context_size(struct intel_engine_cs *ring)
{
int ret = 0;
WARN_ON(INTEL_INFO(ring->dev)->gen < 8);
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
switch (ring->id) {
case RCS:
if (INTEL_INFO(ring->dev)->gen >= 9)
ret = GEN9_LR_CONTEXT_RENDER_SIZE;
else
ret = GEN8_LR_CONTEXT_RENDER_SIZE;
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
break;
case VCS:
case BCS:
case VECS:
case VCS2:
ret = GEN8_LR_CONTEXT_OTHER_SIZE;
break;
}
return ret;
}
static void lrc_setup_hardware_status_page(struct intel_engine_cs *ring,
struct drm_i915_gem_object *default_ctx_obj)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
/* The status page is offset 0 from the default context object
* in LRC mode. */
ring->status_page.gfx_addr = i915_gem_obj_ggtt_offset(default_ctx_obj);
ring->status_page.page_addr =
kmap(sg_page(default_ctx_obj->pages->sgl));
ring->status_page.obj = default_ctx_obj;
I915_WRITE(RING_HWS_PGA(ring->mmio_base),
(u32)ring->status_page.gfx_addr);
POSTING_READ(RING_HWS_PGA(ring->mmio_base));
}
/**
* intel_lr_context_deferred_create() - create the LRC specific bits of a context
* @ctx: LR context to create.
* @ring: engine to be used with the context.
*
* This function can be called more than once, with different engines, if we plan
* to use the context with them. The context backing objects and the ringbuffers
* (specially the ringbuffer backing objects) suck a lot of memory up, and that's why
* the creation is a deferred call: it's better to make sure first that we need to use
* a given ring with the context.
*
* Return: non-zero on error.
*/
int intel_lr_context_deferred_create(struct intel_context *ctx,
struct intel_engine_cs *ring)
{
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
const bool is_global_default_ctx = (ctx == ring->default_context);
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
struct drm_device *dev = ring->dev;
struct drm_i915_gem_object *ctx_obj;
uint32_t context_size;
struct intel_ringbuffer *ringbuf;
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
int ret;
WARN_ON(ctx->legacy_hw_ctx.rcs_state != NULL);
WARN_ON(ctx->engine[ring->id].state);
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
context_size = round_up(get_lr_context_size(ring), 4096);
ctx_obj = i915_gem_alloc_context_obj(dev, context_size);
if (IS_ERR(ctx_obj)) {
ret = PTR_ERR(ctx_obj);
DRM_DEBUG_DRIVER("Alloc LRC backing obj failed: %d\n", ret);
return ret;
}
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
if (is_global_default_ctx) {
ret = i915_gem_obj_ggtt_pin(ctx_obj, GEN8_LR_CONTEXT_ALIGN, 0);
if (ret) {
DRM_DEBUG_DRIVER("Pin LRC backing obj failed: %d\n",
ret);
drm_gem_object_unreference(&ctx_obj->base);
return ret;
}
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
}
ringbuf = kzalloc(sizeof(*ringbuf), GFP_KERNEL);
if (!ringbuf) {
DRM_DEBUG_DRIVER("Failed to allocate ringbuffer %s\n",
ring->name);
ret = -ENOMEM;
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
goto error_unpin_ctx;
}
ringbuf->ring = ring;
ringbuf->size = 32 * PAGE_SIZE;
ringbuf->effective_size = ringbuf->size;
ringbuf->head = 0;
ringbuf->tail = 0;
ringbuf->last_retired_head = -1;
intel_ring_update_space(ringbuf);
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
if (ringbuf->obj == NULL) {
ret = intel_alloc_ringbuffer_obj(dev, ringbuf);
if (ret) {
DRM_DEBUG_DRIVER(
"Failed to allocate ringbuffer obj %s: %d\n",
ring->name, ret);
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
goto error_free_rbuf;
}
if (is_global_default_ctx) {
ret = intel_pin_and_map_ringbuffer_obj(dev, ringbuf);
if (ret) {
DRM_ERROR(
"Failed to pin and map ringbuffer %s: %d\n",
ring->name, ret);
goto error_destroy_rbuf;
}
}
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
}
ret = populate_lr_context(ctx, ctx_obj, ring, ringbuf);
if (ret) {
DRM_DEBUG_DRIVER("Failed to populate LRC: %d\n", ret);
goto error;
}
ctx->engine[ring->id].ringbuf = ringbuf;
drm/i915/bdw: A bit more advanced LR context alloc/free Now that we have the ability to allocate our own context backing objects and we have multiplexed one of them per engine inside the context structs, we can finally allocate and free them correctly. Regarding the context size, reading the register to calculate the sizes can work, I think, however the docs are very clear about the actual context sizes on GEN8, so just hardcode that and use it. v2: Rebased on top of the Full PPGTT series. It is important to notice that at this point we have one global default context per engine, all of them using the aliasing PPGTT (as opposed to the single global default context we have with legacy HW contexts). v3: - Go back to one single global default context, this time with multiple backing objects inside. - Use different context sizes for non-render engines, as suggested by Damien (still hardcoded, since the information about the context size registers in the BSpec is, well, *lacking*). - Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien). - Move default context backing object creation to intel_init_ring (so that we don't waste memory in rings that might not get initialized). v4: - Reuse the HW legacy context init/fini. - Create a separate free function. - Rename the functions with an intel_ preffix. v5: Several rebases to account for the changes in the previous patches. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:14 +08:00
ctx->engine[ring->id].state = ctx_obj;
if (ctx == ring->default_context)
lrc_setup_hardware_status_page(ring, ctx_obj);
else if (ring->id == RCS && !ctx->rcs_initialized) {
if (ring->init_context) {
ret = ring->init_context(ring, ctx);
if (ret) {
DRM_ERROR("ring init context: %d\n", ret);
ctx->engine[ring->id].ringbuf = NULL;
ctx->engine[ring->id].state = NULL;
goto error;
}
}
ctx->rcs_initialized = true;
}
return 0;
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
error:
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
if (is_global_default_ctx)
intel_unpin_ringbuffer_obj(ringbuf);
error_destroy_rbuf:
intel_destroy_ringbuffer_obj(ringbuf);
error_free_rbuf:
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
kfree(ringbuf);
drm/i915/bdw: Pin the ringbuffer backing object to GGTT on-demand Same as with the context, pinning to GGTT regardless is harmful (it badly fragments the GGTT and can even exhaust it). Unfortunately, this case is also more complex than the previous one because we need to map and access the ringbuffer in several places along the execbuffer path (and we cannot make do by leaving the default ringbuffer pinned, as before). Also, the context object itself contains a pointer to the ringbuffer address that we have to keep updated if we are going to allow the ringbuffer to move around. v2: Same as with the context pinning, we cannot really do it during an interrupt. Also, pin the default ringbuffers objects regardless (makes error capture a lot easier). v3: Rebased. Take a pin reference of the ringbuffer for each item in the execlist request queue because the hardware may still be using the ringbuffer after the MI_USER_INTERRUPT to notify the seqno update is executed. The ringbuffer must remain pinned until the context save is complete. No longer pin and unpin ringbuffer in populate_lr_context() - this transient address is meaningless and the pinning can cause a sleep while atomic. v4: Moved ringbuffer pin and unpin into the lr_context_pin functions. Downgraded pinning check BUG_ONs to WARN_ONs. v5: Reinstated WARN_ONs for unexpected execlist states. Removed unused variable. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:56 +08:00
error_unpin_ctx:
drm/i915/bdw: Pin the context backing objects to GGTT on-demand Up until now, we have pinned every logical ring context backing object during creation, and left it pinned until destruction. This made my life easier, but it's a harmful thing to do, because we cause fragmentation of the GGTT (and, eventually, we would run out of space). This patch makes the pinning on-demand: the backing objects of the two contexts that are written to the ELSP are pinned right before submission and unpinned once the hardware is done with them. The only context that is still pinned regardless is the global default one, so that the HWS can still be accessed in the same way (ring->status_page). v2: In the early version of this patch, we were pinning the context as we put it into the ELSP: on the one hand, this is very efficient because only a maximum two contexts are pinned at any given time, but on the other hand, we cannot really pin in interrupt time :( v3: Use a mutex rather than atomic_t to protect pin count to avoid races. Do not unpin default context in free_request. v4: Break out pin and unpin into functions. Fix style problems reported by checkpatch v5: Remove unpin_lock as all pinning and unpinning is done with the struct mutex already locked. Add WARN_ONs to make sure this is the case in future. Issue: VIZ-4277 Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Reviewed-by: Deepak S<deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13 18:28:10 +08:00
if (is_global_default_ctx)
i915_gem_object_ggtt_unpin(ctx_obj);
drm/i915/bdw: Populate LR contexts (somewhat) For the most part, logical ring context objects are similar to hardware contexts in that the backing object is meant to be opaque. There are some exceptions where we need to poke certain offsets of the object for initialization, updating the tail pointer or updating the PDPs. For our basic execlist implementation we'll only need our PPGTT PDs, and ringbuffer addresses in order to set up the context. With previous patches, we have both, so start prepping the context to be load. Before running a context for the first time you must populate some fields in the context object. These fields begin 1 PAGE + LRCA, ie. the first page (in 0 based counting) of the context image. These same fields will be read and written to as contexts are saved and restored once the system is up and running. Many of these fields are completely reused from previous global registers: ringbuffer head/tail/control, context control matches some previous MI_SET_CONTEXT flags, and page directories. There are other fields which we don't touch which we may want in the future. v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11) for other engines. v3: Several rebases and general changes to the code. v4: Squash with "Extract LR context object populating" Also, Damien's review comments: - Set the Force Posted bit on the LRI header, as the BSpec suggest we do. - Prevent warning when compiling a 32-bits kernel without HIGHMEM64. - Add a clarifying comment to the context population code. v5: Damien's review comments: - The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted. - Remove dead code. v6: Add a note about the (presumed) differences between BDW and CHV state contexts. Also, Brad's review comments: - Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros. - Be less magical about how we set the ring size in the context. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com> (v2) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:17 +08:00
drm_gem_object_unreference(&ctx_obj->base);
return ret;
}
void intel_lr_context_reset(struct drm_device *dev,
struct intel_context *ctx)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
int i;
for_each_ring(ring, dev_priv, i) {
struct drm_i915_gem_object *ctx_obj =
ctx->engine[ring->id].state;
struct intel_ringbuffer *ringbuf =
ctx->engine[ring->id].ringbuf;
uint32_t *reg_state;
struct page *page;
if (!ctx_obj)
continue;
if (i915_gem_object_get_pages(ctx_obj)) {
WARN(1, "Failed get_pages for context obj\n");
continue;
}
page = i915_gem_object_get_page(ctx_obj, 1);
reg_state = kmap_atomic(page);
reg_state[CTX_RING_HEAD+1] = 0;
reg_state[CTX_RING_TAIL+1] = 0;
kunmap_atomic(reg_state);
ringbuf->head = 0;
ringbuf->tail = 0;
}
}