UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/Kconfig.debug

183 lines
6.1 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
menu "Kernel hacking"
source "lib/Kconfig.debug"
ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem There are very few legitimate use cases, if any, for directly accessing system RAM through /dev/mem. So let's mimic what they do on x86 and forbid it when CONFIG_STRICT_DEVMEM is turned on. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2010-09-23 06:34:36 +08:00
config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
access to this is obviously disastrous, but specific access can
be used by people debugging the kernel.
If this option is switched on, the /dev/mem file only allows
userspace access to memory mapped peripherals.
If in doubt, say Y.
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 20:56:34 +08:00
# RMK wants arm kernels compiled with frame pointers or stack unwinding.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
Thumb-2: Add Thumb-2 support to the build files This patch adds the necessary entries to the Makefile and Kconfig files for building the Thumb-2 kernel. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:33:02 +08:00
depends on !THUMB2_KERNEL
ARM: ftrace: enable function graph tracer Add the options to enable the function graph tracer on ARM. Function graph tracer support requires frame pointers, so exclude Thumb-2 and also make sure FRAME_POINTER gets enabled when FUNCTION_GRAPH_TRACER is used, since FUNCTION_TRACER doesn't "select FRAME_POINTER" when ARM_UNWIND is used. Therefore, with GCC 4.4.0+, you get plain function tracing without frame pointers, but you'll need them if you want function graph tracing. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rabin Vincent <rabin@rab.in>
2010-11-07 01:33:53 +08:00
default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say N here, the resulting kernel will be slightly smaller and
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 20:56:34 +08:00
faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
when a problem occurs with the kernel, the information that is
reported is severely limited.
config ARM_UNWIND
ARM: Ensure experimental options are so marked It is kernel-wide policy that options depending on EXPERIMENTAL should also have '(EXPERIMENTAL)' in their option text, and options with '(EXPERIMENTAL)' depend on EXPERIMENTAL. Ensure that all ARM options comply with this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-06 07:06:22 +08:00
bool "Enable stack unwinding support (EXPERIMENTAL)"
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 20:56:34 +08:00
depends on AEABI && EXPERIMENTAL
default y
help
This option enables stack unwinding support in the kernel
using the information automatically generated by the
compiler. The resulting kernel image is slightly bigger but
the performance is not affected. Currently, this feature
only works with EABI compilers. If unsure say Y.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: 6314/1: ftrace: allow build without frame pointers on ARM With a new enough GCC, ARM function tracing can be supported without the need for frame pointers. This is essential for Thumb-2 support, since frame pointers aren't available then. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-11 02:32:37 +08:00
config OLD_MCOUNT
bool
depends on FUNCTION_TRACER && FRAME_POINTER
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config DEBUG_USER
bool "Verbose user fault messages"
help
When a user program crashes due to an exception, the kernel can
print a brief message explaining what the problem was. This is
sometimes helpful for debugging but serves no purpose on a
production system. Most people should say N here.
In addition, you need to pass user_debug=N on the kernel command
line to enable this feature. N consists of the sum of:
1 - undefined instruction events
2 - system calls
4 - invalid data aborts
8 - SIGSEGV faults
16 - SIGBUS faults
# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 02:04:44 +08:00
bool "Kernel low-level debugging functions (read help!)"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
depends on DEBUG_KERNEL
help
[ARM] Fix typo in arch/arm/Kconfig.debug It's called printch, not printchar Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-09 22:57:17 +08:00
Say Y here to include definitions of printascii, printch, printhex
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
in the kernel. This is helpful if you are debugging code that
executes before the console is initialized.
ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 02:04:44 +08:00
Note that selecting this option will limit the kernel to a single
UART definition, as specified below. Attempting to boot the kernel
image on a different platform *will not work*, so this option should
not be enabled for kernels that are intended to be portable.
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 01:58:51 +08:00
choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
ARM: 7116/1: debug: provide dummy default option for DEBUG_LL UART choice Defaulting to DEBUG_ICEDCC will cause systems to hang during boot unless a hardware debugger is listening to the debug comms. channel. This patch adds a dummy UART option as the default DEBUG_LL choice which requires the platform to do the right thing. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-04 01:29:03 +08:00
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
ARM: 7097/1: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice DEBUG_ICEDCC support is just another DEBUG_LL choice and selecting it along with other DEBUG_LL options doesn't make much sense. Put it into the DEBUG_LL choice to avoid confusion. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-23 03:28:36 +08:00
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
ARM: 7116/1: debug: provide dummy default option for DEBUG_LL UART choice Defaulting to DEBUG_ICEDCC will cause systems to hang during boot unless a hardware debugger is listening to the debug comms. channel. This patch adds a dummy UART option as the default DEBUG_LL choice which requires the platform to do the right thing. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-04 01:29:03 +08:00
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
ARM: 7096/1: debug: Add UART1 config choices ARM patch 7072/1 (debug: use kconfig choice for selecting DEBUG_LL UART) didn't notice that the Kconfigs relied on being unselected to configure a different serial port. Since there is no NONE option in a choice menu, explicitly add the other option so that both serial ports can be selected. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-23 03:28:35 +08:00
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 01:58:51 +08:00
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
ARM: 7096/1: debug: Add UART1 config choices ARM patch 7072/1 (debug: use kconfig choice for selecting DEBUG_LL UART) didn't notice that the Kconfigs relied on being unselected to configure a different serial port. Since there is no NONE option in a choice menu, explicitly add the other option so that both serial ports can be selected. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-23 03:28:35 +08:00
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on these devices.
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 01:58:51 +08:00
config DEBUG_CLPS711X_UART2
bool "Kernel low-level debugging messages via UART2"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 0. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 1. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 2. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 01:58:51 +08:00
endchoice
ARM: Add an earlyprintk debug console This patch allows an earlyprintk console if CONFIG_DEBUG_LL is enabled, using the printch asm function. The patch is based on the original work by Sascha Hauer. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-12-09 18:02:18 +08:00
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
help
Say Y here if you want to have an early console using the
kernel low-level debugging functions. Add earlyprintk to your
kernel parameters to enable this console.
ARM: 5841/1: a driver for on-chip ETM and ETB This driver implements support for on-chip Embedded Tracing Macrocell and Embedded Trace Buffer. It allows to trigger tracing of kernel execution flow and exporting trace output to userspace via character device and a sysrq combo. Trace output can then be decoded by a fairly simple open source tool [1] which is already sufficient to get the idea of what the kernel is doing. [1]: http://github.com/virtuoso/etm2human Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 21:00:51 +08:00
config OC_ETM
bool "On-chip ETM and ETB"
select ARM_AMBA
help
Enables the on-chip embedded trace macrocell and embedded trace
buffer driver that will allow you to collect traces of the
kernel code.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu