OpenCloudOS-Kernel/arch/x86/include/asm/irqflags.h

210 lines
4.0 KiB
C
Raw Normal View History

#ifndef _X86_IRQFLAGS_H_
#define _X86_IRQFLAGS_H_
#include <asm/processor-flags.h>
#ifndef __ASSEMBLY__
/*
* Interrupt control:
*/
static inline unsigned long native_save_fl(void)
{
unsigned long flags;
/*
* "=rm" is safe here, because "pop" adjusts the stack before
* it evaluates its effective address -- this is part of the
* documented behavior of the "pop" instruction.
*/
asm volatile("# __raw_save_flags\n\t"
"pushf ; pop %0"
: "=rm" (flags)
: /* no input */
: "memory");
return flags;
}
static inline void native_restore_fl(unsigned long flags)
{
asm volatile("push %0 ; popf"
: /* no output */
:"g" (flags)
:"memory", "cc");
}
static inline void native_irq_disable(void)
{
asm volatile("cli": : :"memory");
}
static inline void native_irq_enable(void)
{
asm volatile("sti": : :"memory");
}
static inline void native_safe_halt(void)
{
asm volatile("sti; hlt": : :"memory");
}
static inline void native_halt(void)
{
asm volatile("hlt": : :"memory");
}
#endif
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#ifndef __ASSEMBLY__
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 11:04:36 +08:00
#include <linux/types.h>
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 11:04:36 +08:00
static inline notrace unsigned long arch_local_save_flags(void)
{
return native_save_fl();
}
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 11:04:36 +08:00
static inline notrace void arch_local_irq_restore(unsigned long flags)
{
native_restore_fl(flags);
}
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 11:04:36 +08:00
static inline notrace void arch_local_irq_disable(void)
{
native_irq_disable();
}
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 11:04:36 +08:00
static inline notrace void arch_local_irq_enable(void)
{
native_irq_enable();
}
/*
* Used in the idle loop; sti takes one instruction cycle
* to complete:
*/
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
static inline void arch_safe_halt(void)
{
native_safe_halt();
}
/*
* Used when interrupts are already enabled or to
* shutdown the processor:
*/
static inline void halt(void)
{
native_halt();
}
/*
* For spinlocks, etc:
*/
tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functions I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02 11:04:36 +08:00
static inline notrace unsigned long arch_local_irq_save(void)
{
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
unsigned long flags = arch_local_save_flags();
arch_local_irq_disable();
return flags;
}
#else
#define ENABLE_INTERRUPTS(x) sti
#define DISABLE_INTERRUPTS(x) cli
#ifdef CONFIG_X86_64
#define SWAPGS swapgs
/*
* Currently paravirt can't handle swapgs nicely when we
* don't have a stack we can rely on (such as a user space
* stack). So we either find a way around these or just fault
* and emulate if a guest tries to call swapgs directly.
*
* Either way, this is a good way to document that we don't
* have a reliable stack. x86_64 only.
*/
#define SWAPGS_UNSAFE_STACK swapgs
#define PARAVIRT_ADJUST_EXCEPTION_FRAME /* */
#define INTERRUPT_RETURN iretq
#define USERGS_SYSRET64 \
swapgs; \
sysretq;
#define USERGS_SYSRET32 \
swapgs; \
sysretl
#define ENABLE_INTERRUPTS_SYSEXIT32 \
swapgs; \
sti; \
sysexit
#else
#define INTERRUPT_RETURN iret
#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
#define GET_CR0_INTO_EAX movl %cr0, %eax
#endif
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_PARAVIRT */
#ifndef __ASSEMBLY__
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
return !(flags & X86_EFLAGS_IF);
}
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
static inline int arch_irqs_disabled(void)
{
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
unsigned long flags = arch_local_save_flags();
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 21:08:55 +08:00
return arch_irqs_disabled_flags(flags);
}
#else
#ifdef CONFIG_X86_64
#define ARCH_LOCKDEP_SYS_EXIT call lockdep_sys_exit_thunk
#define ARCH_LOCKDEP_SYS_EXIT_IRQ \
TRACE_IRQS_ON; \
sti; \
SAVE_REST; \
LOCKDEP_SYS_EXIT; \
RESTORE_REST; \
cli; \
TRACE_IRQS_OFF;
#else
#define ARCH_LOCKDEP_SYS_EXIT \
pushl %eax; \
pushl %ecx; \
pushl %edx; \
call lockdep_sys_exit; \
popl %edx; \
popl %ecx; \
popl %eax;
#define ARCH_LOCKDEP_SYS_EXIT_IRQ
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
ftrace: trace irq disabled critical timings This patch adds latency tracing for critical timings (how long interrupts are disabled for). "irqsoff" is added to /debugfs/tracing/available_tracers Note: tracing_max_latency also holds the max latency for irqsoff (in usecs). (default to large number so one must start latency tracing) tracing_thresh threshold (in usecs) to always print out if irqs off is detected to be longer than stated here. If irq_thresh is non-zero, then max_irq_latency is ignored. Here's an example of a trace with ftrace_enabled = 0 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 Signed-off-by: Ingo Molnar <mingo@elte.hu> -------------------------------------------------------------------- latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= And this is a trace with ftrace_enabled == 1 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 -------------------------------------------------------------------- latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000]) swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000]) swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000]) swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47) swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50) swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000]) swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000]) swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 03:20:42 +08:00
# define TRACE_IRQS_ON call trace_hardirqs_on_thunk;
# define TRACE_IRQS_OFF call trace_hardirqs_off_thunk;
#else
# define TRACE_IRQS_ON
# define TRACE_IRQS_OFF
#endif
#ifdef CONFIG_DEBUG_LOCK_ALLOC
# define LOCKDEP_SYS_EXIT ARCH_LOCKDEP_SYS_EXIT
# define LOCKDEP_SYS_EXIT_IRQ ARCH_LOCKDEP_SYS_EXIT_IRQ
# else
# define LOCKDEP_SYS_EXIT
# define LOCKDEP_SYS_EXIT_IRQ
# endif
#endif /* __ASSEMBLY__ */
#endif