OpenCloudOS-Kernel/drivers/memory/Kconfig

170 lines
5.5 KiB
Plaintext
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0-only
#
# Memory devices
#
menuconfig MEMORY
bool "Memory Controller drivers"
if MEMORY
config DDR
bool
help
Data from JEDEC specs for DDR SDRAM memories,
particularly the AC timing parameters and addressing
information. This data is useful for drivers handling
DDR SDRAM controllers.
config ARM_PL172_MPMC
tristate "ARM PL172 MPMC driver"
depends on ARM_AMBA && OF
help
This selects the ARM PrimeCell PL172 MultiPort Memory Controller.
If you have an embedded system with an AMBA bus and a PL172
controller, say Y or M here.
config ATMEL_SDRAMC
bool "Atmel (Multi-port DDR-)SDRAM Controller"
default y
depends on ARCH_AT91 && OF
help
This driver is for Atmel SDRAM Controller or Atmel Multi-port
DDR-SDRAM Controller available on Atmel AT91SAM9 and SAMA5 SoCs.
Starting with the at91sam9g45, this controller supports SDR, DDR and
LP-DDR memories.
config ATMEL_EBI
bool "Atmel EBI driver"
default y
depends on ARCH_AT91 && OF
select MFD_SYSCON
select MFD_ATMEL_SMC
help
Driver for Atmel EBI controller.
Used to configure the EBI (external bus interface) when the device-
tree is used. This bus supports NANDs, external ethernet controller,
SRAMs, ATA devices, etc.
config TI_AEMIF
tristate "Texas Instruments AEMIF driver"
depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
help
This driver is for the AEMIF module available in Texas Instruments
SoCs. AEMIF stands for Asynchronous External Memory Interface and
is intended to provide a glue-less interface to a variety of
asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
of 256M bytes of any of these memories can be accessed at a given
time via four chip selects with 64M byte access per chip select.
config TI_EMIF
tristate "Texas Instruments EMIF driver"
depends on ARCH_OMAP2PLUS
select DDR
help
This driver is for the EMIF module available in Texas Instruments
SoCs. EMIF is an SDRAM controller that, based on its revision,
supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
This driver takes care of only LPDDR2 memories presently. The
functions of the driver includes re-configuring AC timing
parameters and other settings during frequency, voltage and
temperature changes
config OMAP_GPMC
bool
select GPIOLIB
help
This driver is for the General Purpose Memory Controller (GPMC)
present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
interfacing to a variety of asynchronous as well as synchronous
memory drives like NOR, NAND, OneNAND, SRAM.
config OMAP_GPMC_DEBUG
bool "Enable GPMC debug output and skip reset of GPMC during init"
depends on OMAP_GPMC
help
Enables verbose debugging mostly to decode the bootloader provided
timings. To preserve the bootloader provided timings, the reset
of GPMC is skipped during init. Enable this during development to
configure devices connected to the GPMC bus.
NOTE: In addition to matching the register setup with the bootloader
you also need to match the GPMC FCLK frequency used by the
bootloader or else the GPMC timings won't be identical with the
bootloader timings.
memory: ti-emif-sram: introduce relocatable suspend/resume handlers Certain SoCs like Texas Instruments AM335x and AM437x require parts of the EMIF PM code to run late in the suspend sequence from SRAM, such as saving and restoring the EMIF context and placing the memory into self-refresh. One requirement for these SoCs to suspend and enter its lowest power mode, called DeepSleep0, is that the PER power domain must be shut off. Because the EMIF (DDR Controller) resides within this power domain, it will lose context during a suspend operation, so we must save it so we can restore once we resume. However, we cannot execute this code from external memory, as it is not available at this point, so the code must be executed late in the suspend path from SRAM. This patch introduces a ti-emif-sram driver that includes several functions written in ARM ASM that are relocatable so the PM SRAM code can use them. It also allocates a region of writable SRAM to be used by the code running in the executable region of SRAM to save and restore the EMIF context. It can export a table containing the absolute addresses of the available PM functions so that other SRAM code can branch to them. This code is required for suspend/resume on AM335x and AM437x to work. In addition to this, to be able to share data structures between C and the ti-emif-sram-pm assembly code, we can automatically generate all of the C struct member offsets and sizes as macros by processing emif-asm-offsets.c into assembly code and then extracting the relevant data as is done for the generated platform asm-offsets.h files. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-06-18 03:52:10 +08:00
config TI_EMIF_SRAM
tristate "Texas Instruments EMIF SRAM driver"
depends on (SOC_AM33XX || SOC_AM43XX) && SRAM
help
This driver is for the EMIF module available on Texas Instruments
AM33XX and AM43XX SoCs and is required for PM. Certain parts of
the EMIF PM code must run from on-chip SRAM late in the suspend
sequence so this driver provides several relocatable PM functions
for the SoC PM code to use.
config MVEBU_DEVBUS
bool "Marvell EBU Device Bus Controller"
default y
depends on PLAT_ORION && OF
help
This driver is for the Device Bus controller available in some
Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and
Armada 370 and Armada XP. This controller allows to handle flash
devices such as NOR, NAND, SRAM, and FPGA.
config FSL_CORENET_CF
tristate "Freescale CoreNet Error Reporting"
depends on FSL_SOC_BOOKE
help
Say Y for reporting of errors from the Freescale CoreNet
Coherency Fabric. Errors reported include accesses to
physical addresses that mapped by no local access window
(LAW) or an invalid LAW, as well as bad cache state that
represents a coherency violation.
powerpc: select MEMORY for FSL_IFC to not break existing .config files commit d2ae2e20fbdde5a65f3a5a153044ab1e5c53f7cc ("driver/memory:Move Freescale IFC driver to a common driver") introduces this build regression into the mpc85xx_defconfig: drivers/built-in.o: In function `fsl_ifc_nand_remove': drivers/mtd/nand/fsl_ifc_nand.c:1147: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1147: undefined reference to `fsl_ifc_ctrl_dev' drivers/built-in.o: In function `fsl_ifc_nand_probe': drivers/mtd/nand/fsl_ifc_nand.c:1031: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1031: undefined reference to `fsl_ifc_ctrl_dev' drivers/built-in.o: In function `match_bank': drivers/mtd/nand/fsl_ifc_nand.c:1013: undefined reference to `convert_ifc_address' drivers/built-in.o: In function `fsl_ifc_nand_probe': drivers/mtd/nand/fsl_ifc_nand.c:1059: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1080: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1069: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1069: undefined reference to `fsl_ifc_ctrl_dev' make: *** [vmlinux] Error 1 This happens because there is nothing to descend us into the drivers/memory directory in the mpc85xx_defconfig. It wasn't selecting CONFIG_MEMORY. So we never built drivers/memory/fsl_ifc.o and so we have nothing to link the above symbols against. Since the goal of the original commit was to relocate the driver to an arch independent location, it only makes sense to relocate the Kconfig setting there as well. But that alone won't fix the build failure; for that we ensure whoever selects FSL_IFC also selects MEMORY. Cc: Prabhakar Kushwaha <prabhakar@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-20 06:46:40 +08:00
config FSL_IFC
bool
depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
depends on HAS_IOMEM
powerpc: select MEMORY for FSL_IFC to not break existing .config files commit d2ae2e20fbdde5a65f3a5a153044ab1e5c53f7cc ("driver/memory:Move Freescale IFC driver to a common driver") introduces this build regression into the mpc85xx_defconfig: drivers/built-in.o: In function `fsl_ifc_nand_remove': drivers/mtd/nand/fsl_ifc_nand.c:1147: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1147: undefined reference to `fsl_ifc_ctrl_dev' drivers/built-in.o: In function `fsl_ifc_nand_probe': drivers/mtd/nand/fsl_ifc_nand.c:1031: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1031: undefined reference to `fsl_ifc_ctrl_dev' drivers/built-in.o: In function `match_bank': drivers/mtd/nand/fsl_ifc_nand.c:1013: undefined reference to `convert_ifc_address' drivers/built-in.o: In function `fsl_ifc_nand_probe': drivers/mtd/nand/fsl_ifc_nand.c:1059: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1080: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1069: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1069: undefined reference to `fsl_ifc_ctrl_dev' make: *** [vmlinux] Error 1 This happens because there is nothing to descend us into the drivers/memory directory in the mpc85xx_defconfig. It wasn't selecting CONFIG_MEMORY. So we never built drivers/memory/fsl_ifc.o and so we have nothing to link the above symbols against. Since the goal of the original commit was to relocate the driver to an arch independent location, it only makes sense to relocate the Kconfig setting there as well. But that alone won't fix the build failure; for that we ensure whoever selects FSL_IFC also selects MEMORY. Cc: Prabhakar Kushwaha <prabhakar@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-20 06:46:40 +08:00
config JZ4780_NEMC
bool "Ingenic JZ4780 SoC NEMC driver"
default y
depends on MIPS || COMPILE_TEST
depends on HAS_IOMEM && OF
help
This driver is for the NAND/External Memory Controller (NEMC) in
the Ingenic JZ4780. This controller is used to handle external
memory devices such as NAND and SRAM.
config MTK_SMI
bool
depends on ARCH_MEDIATEK || COMPILE_TEST
help
This driver is for the Memory Controller module in MediaTek SoCs,
mainly help enable/disable iommu and control the power domain and
clocks for each local arbiter.
config DA8XX_DDRCTL
bool "Texas Instruments da8xx DDR2/mDDR driver"
depends on ARCH_DAVINCI_DA8XX
help
This driver is for the DDR2/mDDR Memory Controller present on
Texas Instruments da8xx SoCs. It's used to tweak various memory
controller configuration options.
config PL353_SMC
tristate "ARM PL35X Static Memory Controller(SMC) driver"
default y
depends on ARM
depends on ARM_AMBA
help
This driver is for the ARM PL351/PL353 Static Memory
Controller(SMC) module.
source "drivers/memory/samsung/Kconfig"
memory: Add NVIDIA Tegra memory controller support The memory controller on NVIDIA Tegra exposes various knobs that can be used to tune the behaviour of the clients attached to it. Currently this driver sets up the latency allowance registers to the HW defaults. Eventually an API should be exported by this driver (via a custom API or a generic subsystem) to allow clients to register latency requirements. This driver also registers an IOMMU (SMMU) that's implemented by the memory controller. It is supported on Tegra30, Tegra114 and Tegra124 currently. Tegra20 has a GART instead. The Tegra SMMU operates on memory clients and SWGROUPs. A memory client is a unidirectional, special-purpose DMA master. A SWGROUP represents a set of memory clients that form a logical functional unit corresponding to a single device. Typically a device has two clients: one client for read transactions and one client for write transactions, but there are also devices that have only read clients, but many of them (such as the display controllers). Because there is no 1:1 relationship between memory clients and devices the driver keeps a table of memory clients and the SWGROUPs that they belong to per SoC. Note that this is an exception and due to the fact that the SMMU is tightly integrated with the rest of the Tegra SoC. The use of these tables is discouraged in drivers for generic IOMMU devices such as the ARM SMMU because the same IOMMU could be used in any number of SoCs and keeping such tables for each SoC would not scale. Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-16 15:24:44 +08:00
source "drivers/memory/tegra/Kconfig"
endif