OpenCloudOS-Kernel/drivers/media/usb/em28xx/em28xx.h

813 lines
23 KiB
C
Raw Normal View History

/*
em28xx.h - driver for Empia EM2800/EM2820/2840 USB video capture devices
Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
Ludovico Cavedon <cavedon@sssup.it>
Mauro Carvalho Chehab <mchehab@infradead.org>
Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _EM28XX_H
#define _EM28XX_H
#define EM28XX_VERSION "0.2.2"
#define DRIVER_DESC "Empia em28xx device driver"
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/kref.h>
#include <linux/videodev2.h>
#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-vmalloc.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fh.h>
[media] include/media: split I2C headers from V4L2 core Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-11-10 22:01:44 +08:00
#include <media/i2c/ir-kbd-i2c.h>
#include <media/rc-core.h>
#include "tuner-xc2028.h"
#include "xc5000.h"
#include "em28xx-reg.h"
/* Boards supported by driver */
#define EM2800_BOARD_UNKNOWN 0
#define EM2820_BOARD_UNKNOWN 1
#define EM2820_BOARD_TERRATEC_CINERGY_250 2
#define EM2820_BOARD_PINNACLE_USB_2 3
#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4
#define EM2820_BOARD_MSI_VOX_USB_2 5
#define EM2800_BOARD_TERRATEC_CINERGY_200 6
#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
#define EM2800_BOARD_KWORLD_USB2800 8
#define EM2820_BOARD_PINNACLE_DVC_90 9
#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10
#define EM2880_BOARD_TERRATEC_HYBRID_XS 11
#define EM2820_BOARD_KWORLD_PVRTV2800RF 12
#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13
#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14
#define EM2800_BOARD_VGEAR_POCKETTV 15
#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 16
#define EM2880_BOARD_PINNACLE_PCTV_HD_PRO 17
#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 18
#define EM2860_BOARD_SAA711X_REFERENCE_DESIGN 19
#define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 20
#define EM2800_BOARD_GRABBEEX_USB2800 21
#define EM2750_BOARD_UNKNOWN 22
#define EM2750_BOARD_DLCW_130 23
#define EM2820_BOARD_DLINK_USB_TV 24
#define EM2820_BOARD_GADMEI_UTV310 25
#define EM2820_BOARD_HERCULES_SMART_TV_USB2 26
#define EM2820_BOARD_PINNACLE_USB_2_FM1216ME 27
#define EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE 28
#define EM2860_BOARD_TVP5150_REFERENCE_DESIGN 29
#define EM2820_BOARD_VIDEOLOGY_20K14XUSB 30
#define EM2821_BOARD_USBGEAR_VD204 31
#define EM2821_BOARD_SUPERCOMP_USB_2 32
#define EM2860_BOARD_ELGATO_VIDEO_CAPTURE 33
#define EM2860_BOARD_TERRATEC_HYBRID_XS 34
#define EM2860_BOARD_TYPHOON_DVD_MAKER 35
#define EM2860_BOARD_NETGMBH_CAM 36
#define EM2860_BOARD_GADMEI_UTV330 37
#define EM2861_BOARD_YAKUMO_MOVIE_MIXER 38
#define EM2861_BOARD_KWORLD_PVRTV_300U 39
#define EM2861_BOARD_PLEXTOR_PX_TV100U 40
#define EM2870_BOARD_KWORLD_350U 41
#define EM2870_BOARD_KWORLD_355U 42
#define EM2870_BOARD_TERRATEC_XS 43
#define EM2870_BOARD_TERRATEC_XS_MT2060 44
#define EM2870_BOARD_PINNACLE_PCTV_DVB 45
#define EM2870_BOARD_COMPRO_VIDEOMATE 46
#define EM2880_BOARD_KWORLD_DVB_305U 47
#define EM2880_BOARD_KWORLD_DVB_310U 48
#define EM2880_BOARD_MSI_DIGIVOX_AD 49
#define EM2880_BOARD_MSI_DIGIVOX_AD_II 50
#define EM2880_BOARD_TERRATEC_HYBRID_XS_FR 51
#define EM2881_BOARD_DNT_DA2_HYBRID 52
#define EM2881_BOARD_PINNACLE_HYBRID_PRO 53
#define EM2882_BOARD_KWORLD_VS_DVBT 54
#define EM2882_BOARD_TERRATEC_HYBRID_XS 55
#define EM2882_BOARD_PINNACLE_HYBRID_PRO_330E 56
#define EM2883_BOARD_KWORLD_HYBRID_330U 57
#define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58
#define EM2874_BOARD_PCTV_HD_MINI_80E 59
#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60
#define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61
#define EM2820_BOARD_GADMEI_TVR200 62
#define EM2860_BOARD_KAIOMY_TVNPC_U2 63
#define EM2860_BOARD_EASYCAP 64
#define EM2820_BOARD_IODATA_GVMVP_SZ 65
#define EM2880_BOARD_EMPIRE_DUAL_TV 66
#define EM2860_BOARD_TERRATEC_GRABBY 67
#define EM2860_BOARD_TERRATEC_AV350 68
#define EM2882_BOARD_KWORLD_ATSC_315U 69
#define EM2882_BOARD_EVGA_INDTUBE 70
#define EM2820_BOARD_SILVERCREST_WEBCAM 71
#define EM2861_BOARD_GADMEI_UTV330PLUS 72
#define EM2870_BOARD_REDDO_DVB_C_USB_BOX 73
#define EM2800_BOARD_VC211A 74
#define EM2882_BOARD_DIKOM_DK300 75
#define EM2870_BOARD_KWORLD_A340 76
#define EM2874_BOARD_LEADERSHIP_ISDBT 77
#define EM28174_BOARD_PCTV_290E 78
#define EM2884_BOARD_TERRATEC_H5 79
#define EM28174_BOARD_PCTV_460E 80
#define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C 81
#define EM2884_BOARD_CINERGY_HTC_STICK 82
#define EM2860_BOARD_HT_VIDBOX_NW03 83
#define EM2874_BOARD_MAXMEDIA_UB425_TC 84
#define EM2884_BOARD_PCTV_510E 85
#define EM2884_BOARD_PCTV_520E 86
#define EM2884_BOARD_TERRATEC_HTC_USB_XS 87
#define EM2884_BOARD_C3TECH_DIGITAL_DUO 88
#define EM2874_BOARD_DELOCK_61959 89
#define EM2874_BOARD_KWORLD_UB435Q_V2 90
#define EM2765_BOARD_SPEEDLINK_VAD_LAPLACE 91
#define EM28178_BOARD_PCTV_461E 92
#define EM2874_BOARD_KWORLD_UB435Q_V3 93
#define EM28178_BOARD_PCTV_292E 94
#define EM2861_BOARD_LEADTEK_VC100 95
#define EM28178_BOARD_TERRATEC_T2_STICK_HD 96
#define EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 97
#define EM28178_BOARD_PLEX_PX_BCUD 98
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100
media: em28xx: add support for new of Terratec H6 There's a new version of Terratec H6 with uses USB ID 0ccd:10b2. This version is similar to the old one (with is supported via the HTC entry), except that this one has the eeprom on the second bus. On this board, one side of this board is labeled with: dvbc v2.0 The other side with: 94V-0, MO2, RK-4221 with huge digits: 1107 With those patches, the board is properly detected: em28xx 1-1.5:1.0: New device TERRATEC TERRATCE H5 MKII @ 480 Mbps (0ccd:10b2, interface 0, class 0) em28xx 1-1.5:1.0: Audio interface 0 found (Vendor Class) em28xx 1-1.5:1.0: Video interface 0 found: isoc em28xx 1-1.5:1.0: DVB interface 0 found: isoc em28xx 1-1.5:1.0: chip ID is em2884 em28xx eeprom 00000000: 26 00 00 00 02 0b 0f e5 f5 64 01 60 09 e5 f5 64 &........d.`...d em28xx eeprom 00000010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03 .`...".......... em28xx eeprom 00000020: 02 0a b9 e5 f6 b4 93 03 02 09 46 c2 c6 22 c2 c6 ..........F..".. em28xx eeprom 00000030: 22 00 60 00 ef 70 08 85 3d 82 85 3c 83 93 ff ef ".`..p..=..<.... em28xx eeprom 00000040: 60 19 85 3d 82 85 3c 83 e4 93 12 07 a3 12 0a fe `..=..<......... em28xx eeprom 00000050: 05 3d e5 3d 70 02 05 3c 1f 80 e4 22 12 0b 06 02 .=.=p..<...".... em28xx eeprom 00000060: 07 e2 01 00 1a eb 67 95 cd 0c b2 10 f0 13 6b 03 ......g.......k. em28xx eeprom 00000070: 98 22 6a 1c 86 12 27 57 4e 16 29 00 60 00 00 00 ."j...'WN.).`... em28xx eeprom 00000080: 02 00 00 00 5e 00 13 00 f0 10 44 82 82 00 00 00 ....^.....D..... em28xx eeprom 00000090: 5b 81 c0 00 00 00 20 40 20 80 02 20 10 01 00 00 [..... @ .. .... em28xx eeprom 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ em28xx eeprom 000000b0: c6 40 00 00 81 00 00 00 00 00 00 00 00 c4 00 00 .@.............. em28xx eeprom 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 03 ................ em28xx eeprom 000000d0: 31 00 32 00 33 00 34 00 35 00 36 00 37 00 38 00 1.2.3.4.5.6.7.8. em28xx eeprom 000000e0: 39 00 41 00 42 00 43 00 44 00 12 03 54 00 45 00 9.A.B.C.D...T.E. em28xx eeprom 000000f0: 52 00 52 00 41 00 54 00 45 00 43 00 22 03 54 00 R.R.A.T.E.C.".T. em28xx 1-1.5:1.0: eeprom 000100: ... (skipped) em28xx 1-1.5:1.0: EEPROM ID = 26 00 00 00, EEPROM hash = 0xbcd5a8cf em28xx 1-1.5:1.0: EEPROM info: em28xx 1-1.5:1.0: microcode start address = 0x0004, boot configuration = 0x00 em28xx 1-1.5:1.0: I2S audio, 5 sample rates em28xx 1-1.5:1.0: 500mA max power em28xx 1-1.5:1.0: Table at offset 0x27, strings=0x2298, 0x1c6a, 0x1286 em28xx 1-1.5:1.0: Identified as Terratec Cinergy H6 rev. 2 (card=101) em28xx 1-1.5:1.0: Currently, V4L2 is not supported on this model em28xx 1-1.5:1.0: dvb set to isoc mode. usbcore: registered new interface driver em28xx em28xx 1-1.5:1.0: Binding audio extension em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2006 Markus Rechberger em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab em28xx 1-1.5:1.0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196 em28xx 1-1.5:1.0: Number of URBs: 1, with 64 packets and 192 size em28xx 1-1.5:1.0: Audio extension successfully initialized em28xx: Registered (Em28xx Audio Extension) extension em28xx 1-1.5:1.0: Binding DVB extension drxk: status = 0x639260d9 drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz drxk: DRXK driver version 0.9.4300 drxk: frontend initialized. tda18271 4-0060: creating new instance tda18271: TDA18271HD/C2 detected @ 4-0060 dvbdev: DVB: registering new adapter (1-1.5:1.0) em28xx 1-1.5:1.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)... dvbdev: dvb_create_media_entity: media entity 'DRXK DVB-C DVB-T' registered. dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. em28xx 1-1.5:1.0: DVB extension successfully initialized em28xx: Registered (Em28xx dvb Extension) extension em28xx 1-1.5:1.0: Registering input extension rc rc0: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0 Registered IR keymap rc-nec-terratec-cinergy-xs input: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0/input0 em28xx 1-1.5:1.0: Input extension successfully initalized em28xx: Registered (Em28xx Input Extension) extension tda18271: performing RF tracking filter calibration tda18271: RF tracking filter calibration complete Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-03 10:12:23 +08:00
#define EM2884_BOARD_TERRATEC_H6 101
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
#define EM28XX_DEF_BUF 8
/*Limits the max URB message size */
#define URB_MAX_CTRL_SIZE 80
/* Params for validated field */
#define EM28XX_BOARD_NOT_VALIDATED 1
#define EM28XX_BOARD_VALIDATED 0
/* Params for em28xx_cmd() audio */
#define EM28XX_START_AUDIO 1
#define EM28XX_STOP_AUDIO 0
/* maximum number of em28xx boards */
#define EM28XX_MAXBOARDS DVB_MAX_ADAPTERS /* All adapters could be em28xx */
/* maximum number of frames that can be queued */
#define EM28XX_NUM_FRAMES 5
/* number of frames that get used for v4l2_read() */
#define EM28XX_NUM_READ_FRAMES 2
/* number of buffers for isoc transfers */
#define EM28XX_NUM_BUFS 5
[media] em28xx: pre-allocate DVB isoc transfer buffers On MIPS/ARM set-top-boxes, as well as old x86 PCs, memory allocation failures in the em28xx driver are common, due to memory fragmentation over time, that makes impossible to allocate large chunks of coherent memory. A typical system with 256/512 MB of RAM fails after just 1 day of uptime (see the old thread for detailed reports and crashlogs). In fact, the em28xx driver allocates memory for USB isoc transfers at runtime, as opposite to the dvb-usb drivers that allocates the USB buffers when the device is initialized, and frees them when the device is disconnected. Moreover, in digital mode the USB isoc transfer buffers are freed, allocated and cleared every time the user selects a new channel, wasting time and resources. This patch solves both problems by allocating DVB isoc transfer buffers in em28xx_usb_probe(), and freeing them in em28xx_usb_disconnect(). In fact, the buffers size and number depend only on the max USB packet size that is parsed from the USB descriptors in em28xx_usb_probe(), so it can never change for a given device. This approach makes no sense in analog mode (as the buffer size depends on the alternate mode selected at runtime), the patch creates two separate sets of buffers for digital and analog modes. For digital-only devices, USB buffers are created when the device is probed and freed when the device is disconnected. For analog-only devices, nothing changes: isoc buffers are created at runtime. For hybrid devices, two sets of buffers are maintained: the digital-mode buffers are created when the device is probed, and freed when the device is disconnected; analog-mode buffers are created/destroyed at runtime as before. So, in analog mode, digital and analog buffers coexists at the same time: this can be justified by the fact that digital mode is by far more commonly used nowadays, so it makes sense to optimize the driver for this use case scenario. The patch has been tested in the last few days on a x86 PC and a MIPS set-top-box, with the PCTV 290e (digital only) and the Terratec Hybrid XS (hybrid device). With the latter, I switched several times between analog and digital mode (Kaffeine/TvTime) with no issue at all. I unplugged/plugged the devices several times with no problem. Also, after over 3 days of normal usage in the MPIS set-top-box, the PCTV 290e was still up and running. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14 00:59:22 +08:00
#define EM28XX_DVB_NUM_BUFS 5
/* max number of I2C buses on em28xx devices */
#define NUM_I2C_BUSES 2
/* isoc transfers: number of packets for each buffer
windows requests only 64 packets .. so we better do the same
this is what I found out for all alternate numbers there!
*/
#define EM28XX_NUM_ISOC_PACKETS 64
#define EM28XX_DVB_NUM_ISOC_PACKETS 64
/* bulk transfers: transfer buffer size = packet size * packet multiplier
USB 2.0 spec says bulk packet size is always 512 bytes
*/
#define EM28XX_BULK_PACKET_MULTIPLIER 384
#define EM28XX_DVB_BULK_PACKET_MULTIPLIER 94
#define EM28XX_INTERLACED_DEFAULT 1
/*
* Time in msecs to wait for i2c xfers to finish.
* 35ms is the maximum time a SMBUS device could wait when
* clock stretching is used. As the transfer itself will take
* some time to happen, set it to 35 ms.
*
* Ok, I2C doesn't specify any limit. So, eventually, we may need
* to increase this timeout.
*
* FIXME: this assumes that an I2C message is not longer than 1ms.
* This is actually dependent on the I2C bus speed, although most
* devices use a 100kHz clock. So, this assumtion is true most of
* the time.
*/
#define EM28XX_I2C_XFER_TIMEOUT 36
/* time in msecs to wait for AC97 xfers to finish */
#define EM28XX_AC97_XFER_TIMEOUT 100
/* max. number of button state polling addresses */
#define EM28XX_NUM_BUTTON_ADDRESSES_MAX 5
#define PRIMARY_TS 0
#define SECONDARY_TS 1
enum em28xx_mode {
EM28XX_SUSPEND,
EM28XX_ANALOG_MODE,
EM28XX_DIGITAL_MODE,
};
struct em28xx;
struct em28xx_usb_bufs {
/* max packet size of isoc transaction */
int max_pkt_size;
[media] em28xx: pre-allocate DVB isoc transfer buffers On MIPS/ARM set-top-boxes, as well as old x86 PCs, memory allocation failures in the em28xx driver are common, due to memory fragmentation over time, that makes impossible to allocate large chunks of coherent memory. A typical system with 256/512 MB of RAM fails after just 1 day of uptime (see the old thread for detailed reports and crashlogs). In fact, the em28xx driver allocates memory for USB isoc transfers at runtime, as opposite to the dvb-usb drivers that allocates the USB buffers when the device is initialized, and frees them when the device is disconnected. Moreover, in digital mode the USB isoc transfer buffers are freed, allocated and cleared every time the user selects a new channel, wasting time and resources. This patch solves both problems by allocating DVB isoc transfer buffers in em28xx_usb_probe(), and freeing them in em28xx_usb_disconnect(). In fact, the buffers size and number depend only on the max USB packet size that is parsed from the USB descriptors in em28xx_usb_probe(), so it can never change for a given device. This approach makes no sense in analog mode (as the buffer size depends on the alternate mode selected at runtime), the patch creates two separate sets of buffers for digital and analog modes. For digital-only devices, USB buffers are created when the device is probed and freed when the device is disconnected. For analog-only devices, nothing changes: isoc buffers are created at runtime. For hybrid devices, two sets of buffers are maintained: the digital-mode buffers are created when the device is probed, and freed when the device is disconnected; analog-mode buffers are created/destroyed at runtime as before. So, in analog mode, digital and analog buffers coexists at the same time: this can be justified by the fact that digital mode is by far more commonly used nowadays, so it makes sense to optimize the driver for this use case scenario. The patch has been tested in the last few days on a x86 PC and a MIPS set-top-box, with the PCTV 290e (digital only) and the Terratec Hybrid XS (hybrid device). With the latter, I switched several times between analog and digital mode (Kaffeine/TvTime) with no issue at all. I unplugged/plugged the devices several times with no problem. Also, after over 3 days of normal usage in the MPIS set-top-box, the PCTV 290e was still up and running. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14 00:59:22 +08:00
/* number of packets in each buffer */
int num_packets;
/* number of allocated urbs */
int num_bufs;
/* urb for isoc/bulk transfers */
struct urb **urb;
/* transfer buffers for isoc/bulk transfer */
char **transfer_buffer;
[media] em28xx: pre-allocate DVB isoc transfer buffers On MIPS/ARM set-top-boxes, as well as old x86 PCs, memory allocation failures in the em28xx driver are common, due to memory fragmentation over time, that makes impossible to allocate large chunks of coherent memory. A typical system with 256/512 MB of RAM fails after just 1 day of uptime (see the old thread for detailed reports and crashlogs). In fact, the em28xx driver allocates memory for USB isoc transfers at runtime, as opposite to the dvb-usb drivers that allocates the USB buffers when the device is initialized, and frees them when the device is disconnected. Moreover, in digital mode the USB isoc transfer buffers are freed, allocated and cleared every time the user selects a new channel, wasting time and resources. This patch solves both problems by allocating DVB isoc transfer buffers in em28xx_usb_probe(), and freeing them in em28xx_usb_disconnect(). In fact, the buffers size and number depend only on the max USB packet size that is parsed from the USB descriptors in em28xx_usb_probe(), so it can never change for a given device. This approach makes no sense in analog mode (as the buffer size depends on the alternate mode selected at runtime), the patch creates two separate sets of buffers for digital and analog modes. For digital-only devices, USB buffers are created when the device is probed and freed when the device is disconnected. For analog-only devices, nothing changes: isoc buffers are created at runtime. For hybrid devices, two sets of buffers are maintained: the digital-mode buffers are created when the device is probed, and freed when the device is disconnected; analog-mode buffers are created/destroyed at runtime as before. So, in analog mode, digital and analog buffers coexists at the same time: this can be justified by the fact that digital mode is by far more commonly used nowadays, so it makes sense to optimize the driver for this use case scenario. The patch has been tested in the last few days on a x86 PC and a MIPS set-top-box, with the PCTV 290e (digital only) and the Terratec Hybrid XS (hybrid device). With the latter, I switched several times between analog and digital mode (Kaffeine/TvTime) with no issue at all. I unplugged/plugged the devices several times with no problem. Also, after over 3 days of normal usage in the MPIS set-top-box, the PCTV 290e was still up and running. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14 00:59:22 +08:00
};
struct em28xx_usb_ctl {
/* isoc/bulk transfer buffers for analog mode */
struct em28xx_usb_bufs analog_bufs;
[media] em28xx: pre-allocate DVB isoc transfer buffers On MIPS/ARM set-top-boxes, as well as old x86 PCs, memory allocation failures in the em28xx driver are common, due to memory fragmentation over time, that makes impossible to allocate large chunks of coherent memory. A typical system with 256/512 MB of RAM fails after just 1 day of uptime (see the old thread for detailed reports and crashlogs). In fact, the em28xx driver allocates memory for USB isoc transfers at runtime, as opposite to the dvb-usb drivers that allocates the USB buffers when the device is initialized, and frees them when the device is disconnected. Moreover, in digital mode the USB isoc transfer buffers are freed, allocated and cleared every time the user selects a new channel, wasting time and resources. This patch solves both problems by allocating DVB isoc transfer buffers in em28xx_usb_probe(), and freeing them in em28xx_usb_disconnect(). In fact, the buffers size and number depend only on the max USB packet size that is parsed from the USB descriptors in em28xx_usb_probe(), so it can never change for a given device. This approach makes no sense in analog mode (as the buffer size depends on the alternate mode selected at runtime), the patch creates two separate sets of buffers for digital and analog modes. For digital-only devices, USB buffers are created when the device is probed and freed when the device is disconnected. For analog-only devices, nothing changes: isoc buffers are created at runtime. For hybrid devices, two sets of buffers are maintained: the digital-mode buffers are created when the device is probed, and freed when the device is disconnected; analog-mode buffers are created/destroyed at runtime as before. So, in analog mode, digital and analog buffers coexists at the same time: this can be justified by the fact that digital mode is by far more commonly used nowadays, so it makes sense to optimize the driver for this use case scenario. The patch has been tested in the last few days on a x86 PC and a MIPS set-top-box, with the PCTV 290e (digital only) and the Terratec Hybrid XS (hybrid device). With the latter, I switched several times between analog and digital mode (Kaffeine/TvTime) with no issue at all. I unplugged/plugged the devices several times with no problem. Also, after over 3 days of normal usage in the MPIS set-top-box, the PCTV 290e was still up and running. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14 00:59:22 +08:00
/* isoc/bulk transfer buffers for digital mode */
struct em28xx_usb_bufs digital_bufs;
/* Stores already requested buffers */
struct em28xx_buffer *vid_buf;
struct em28xx_buffer *vbi_buf;
/* copy data from URB */
int (*urb_data_copy)(struct em28xx *dev, struct urb *urb);
};
/* Struct to enumberate video formats */
struct em28xx_fmt {
char *name;
u32 fourcc; /* v4l2 format id */
int depth;
int reg;
};
/* buffer for one video frame */
struct em28xx_buffer {
/* common v4l buffer stuff -- must be first */
struct vb2_v4l2_buffer vb;
struct list_head list;
void *mem;
unsigned int length;
int top_field;
/* counter to control buffer fill */
unsigned int pos;
/* NOTE; in interlaced mode, this value is reset to zero at
* the start of each new field (not frame !) */
/* pointer to vmalloc memory address in vb */
char *vb_buf;
};
struct em28xx_dmaqueue {
struct list_head active;
wait_queue_head_t wq;
};
/* inputs */
#define MAX_EM28XX_INPUT 4
enum enum28xx_itype {
EM28XX_VMUX_COMPOSITE = 1,
EM28XX_VMUX_SVIDEO,
EM28XX_VMUX_TELEVISION,
EM28XX_RADIO,
};
enum em28xx_ac97_mode {
EM28XX_NO_AC97 = 0,
EM28XX_AC97_EM202,
EM28XX_AC97_SIGMATEL,
EM28XX_AC97_OTHER,
};
struct em28xx_audio_mode {
enum em28xx_ac97_mode ac97;
};
enum em28xx_int_audio_type {
EM28XX_INT_AUDIO_NONE = 0,
EM28XX_INT_AUDIO_AC97,
EM28XX_INT_AUDIO_I2S,
};
enum em28xx_usb_audio_type {
EM28XX_USB_AUDIO_NONE = 0,
EM28XX_USB_AUDIO_CLASS,
EM28XX_USB_AUDIO_VENDOR,
};
/* em28xx has two audio inputs: tuner and line in.
However, on most devices, an auxiliary AC97 codec device is used.
The AC97 device may have several different inputs and outputs,
depending on their model. So, it is possible to use AC97 mixer to
address more than two different entries.
*/
enum em28xx_amux {
/* This is the only entry for em28xx tuner input */
EM28XX_AMUX_VIDEO, /* em28xx tuner, AC97 mixer Video */
EM28XX_AMUX_LINE_IN, /* AC97 mixer Line In */
/* Some less-common mixer setups */
EM28XX_AMUX_VIDEO2, /* em28xx Line in, AC97 mixer Video */
EM28XX_AMUX_PHONE,
EM28XX_AMUX_MIC,
EM28XX_AMUX_CD,
EM28XX_AMUX_AUX,
EM28XX_AMUX_PCM_OUT,
};
enum em28xx_aout {
/* AC97 outputs */
EM28XX_AOUT_MASTER = 1 << 0,
EM28XX_AOUT_LINE = 1 << 1,
EM28XX_AOUT_MONO = 1 << 2,
EM28XX_AOUT_LFE = 1 << 3,
EM28XX_AOUT_SURR = 1 << 4,
/* PCM IN Mixer - used by AC97_RECORD_SELECT register */
EM28XX_AOUT_PCM_IN = 1 << 7,
/* Bits 10-8 are used to indicate the PCM IN record select */
EM28XX_AOUT_PCM_MIC_PCM = 0 << 8,
EM28XX_AOUT_PCM_CD = 1 << 8,
EM28XX_AOUT_PCM_VIDEO = 2 << 8,
EM28XX_AOUT_PCM_AUX = 3 << 8,
EM28XX_AOUT_PCM_LINE = 4 << 8,
EM28XX_AOUT_PCM_STEREO = 5 << 8,
EM28XX_AOUT_PCM_MONO = 6 << 8,
EM28XX_AOUT_PCM_PHONE = 7 << 8,
};
static inline int ac97_return_record_select(int a_out)
{
return (a_out & 0x700) >> 8;
}
struct em28xx_reg_seq {
int reg;
unsigned char val, mask;
int sleep;
};
struct em28xx_input {
enum enum28xx_itype type;
unsigned int vmux;
enum em28xx_amux amux;
enum em28xx_aout aout;
struct em28xx_reg_seq *gpio;
};
#define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
enum em28xx_decoder {
EM28XX_NODECODER = 0,
EM28XX_TVP5150,
EM28XX_SAA711X,
};
enum em28xx_sensor {
EM28XX_NOSENSOR = 0,
EM28XX_MT9V011,
EM28XX_MT9M001,
EM28XX_MT9M111,
EM28XX_OV2640,
};
V4L/DVB (10654): em28xx: VideoMate For You USB TV box requires tvaudio As reported by Vitaly Wool <vital@embeddedalley.com>: > about half a year ago I posted the patch that basically enabled Compro > VideoMate For You USB TV box support. > The main problem is I couldn't get the sound working. > So I kind of decomposed the box and found out the audio decoder chip > used there was Philips TDA9874A. As far as I can see, it's not supported > within the em28xx suite although it is for other TV tuner drivers. A tvaudio modprobing confirms that tda9874a chip is accessible via i2c: tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840, tda9873h, tda9874h/a, tda9850, tda9855, tea6300, tea6320, tea6420, tda8425, pic16c54 (PV951), ta8874z tvaudio' 1-0058: chip found @ 0xb0 tvaudio' 1-0058: tvaudio': chip_read2: reg254=0x11 tvaudio' 1-0058: tvaudio': chip_read2: reg255=0x2 tvaudio' 1-0058: tda9874a_checkit(): DIC=0x11, SIC=0x2. tvaudio' 1-0058: found tda9874a. tvaudio' 1-0058: tda9874h/a found @ 0xb0 (em28xx #0) tvaudio' 1-0058: tda9874h/a: chip_write: reg0=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg1=0xc0 tvaudio' 1-0058: tda9874h/a: chip_write: reg2=0x2 tvaudio' 1-0058: tda9874h/a: chip_write: reg11=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg12=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg13=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg14=0x1 tvaudio' 1-0058: tda9874h/a: chip_write: reg15=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg16=0x14 tvaudio' 1-0058: tda9874h/a: chip_write: reg17=0x50 tvaudio' 1-0058: tda9874h/a: chip_write: reg18=0xf9 tvaudio' 1-0058: tda9874h/a: chip_write: reg19=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg20=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg24=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg255=0x0 tvaudio' 1-0058: tda9874a_setup(): A2, B/G [0x00]. tvaudio' 1-0058: tda9874h/a: thread started] This patch automatically loads tvaudio when needed (currently, only with this board). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-25 20:06:13 +08:00
enum em28xx_adecoder {
EM28XX_NOADECODER = 0,
EM28XX_TVAUDIO,
};
enum em28xx_led_role {
EM28XX_LED_ANALOG_CAPTURING = 0,
EM28XX_LED_DIGITAL_CAPTURING,
EM28XX_LED_DIGITAL_CAPTURING_TS2,
EM28XX_LED_ILLUMINATION,
EM28XX_NUM_LED_ROLES, /* must be the last */
};
struct em28xx_led {
enum em28xx_led_role role;
u8 gpio_reg;
u8 gpio_mask;
bool inverted;
};
enum em28xx_button_role {
EM28XX_BUTTON_SNAPSHOT = 0,
EM28XX_BUTTON_ILLUMINATION,
EM28XX_NUM_BUTTON_ROLES, /* must be the last */
};
struct em28xx_button {
enum em28xx_button_role role;
u8 reg_r;
u8 reg_clearing;
u8 mask;
bool inverted;
};
struct em28xx_board {
char *name;
int vchannels;
int tuner_type;
int tuner_addr;
unsigned def_i2c_bus; /* Default I2C bus */
/* i2c flags */
unsigned int tda9887_conf;
/* GPIO sequences */
struct em28xx_reg_seq *dvb_gpio;
struct em28xx_reg_seq *suspend_gpio;
struct em28xx_reg_seq *tuner_gpio;
struct em28xx_reg_seq *mute_gpio;
unsigned int is_em2800:1;
unsigned int has_msp34xx:1;
unsigned int mts_firmware:1;
unsigned int max_range_640_480:1;
unsigned int has_dvb:1;
unsigned int has_dual_ts:1;
unsigned int is_webcam:1;
unsigned int valid:1;
unsigned int has_ir_i2c:1;
unsigned char xclk, i2c_speed;
unsigned char radio_addr;
unsigned short tvaudio_addr;
enum em28xx_decoder decoder;
V4L/DVB (10654): em28xx: VideoMate For You USB TV box requires tvaudio As reported by Vitaly Wool <vital@embeddedalley.com>: > about half a year ago I posted the patch that basically enabled Compro > VideoMate For You USB TV box support. > The main problem is I couldn't get the sound working. > So I kind of decomposed the box and found out the audio decoder chip > used there was Philips TDA9874A. As far as I can see, it's not supported > within the em28xx suite although it is for other TV tuner drivers. A tvaudio modprobing confirms that tda9874a chip is accessible via i2c: tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840, tda9873h, tda9874h/a, tda9850, tda9855, tea6300, tea6320, tea6420, tda8425, pic16c54 (PV951), ta8874z tvaudio' 1-0058: chip found @ 0xb0 tvaudio' 1-0058: tvaudio': chip_read2: reg254=0x11 tvaudio' 1-0058: tvaudio': chip_read2: reg255=0x2 tvaudio' 1-0058: tda9874a_checkit(): DIC=0x11, SIC=0x2. tvaudio' 1-0058: found tda9874a. tvaudio' 1-0058: tda9874h/a found @ 0xb0 (em28xx #0) tvaudio' 1-0058: tda9874h/a: chip_write: reg0=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg1=0xc0 tvaudio' 1-0058: tda9874h/a: chip_write: reg2=0x2 tvaudio' 1-0058: tda9874h/a: chip_write: reg11=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg12=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg13=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg14=0x1 tvaudio' 1-0058: tda9874h/a: chip_write: reg15=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg16=0x14 tvaudio' 1-0058: tda9874h/a: chip_write: reg17=0x50 tvaudio' 1-0058: tda9874h/a: chip_write: reg18=0xf9 tvaudio' 1-0058: tda9874h/a: chip_write: reg19=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg20=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg24=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg255=0x0 tvaudio' 1-0058: tda9874a_setup(): A2, B/G [0x00]. tvaudio' 1-0058: tda9874h/a: thread started] This patch automatically loads tvaudio when needed (currently, only with this board). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-25 20:06:13 +08:00
enum em28xx_adecoder adecoder;
struct em28xx_input input[MAX_EM28XX_INPUT];
struct em28xx_input radio;
char *ir_codes;
/* LEDs that need to be controlled explicitly */
struct em28xx_led *leds;
/* Buttons */
struct em28xx_button *buttons;
};
struct em28xx_eeprom {
u8 id[4]; /* 1a eb 67 95 */
__le16 vendor_ID;
__le16 product_ID;
__le16 chip_conf;
__le16 board_conf;
__le16 string1, string2, string3;
u8 string_idx_table;
};
#define EM28XX_CAPTURE_STREAM_EN 1
/* em28xx extensions */
#define EM28XX_AUDIO 0x10
#define EM28XX_DVB 0x20
#define EM28XX_RC 0x30
#define EM28XX_V4L2 0x40
/* em28xx resource types (used for res_get/res_lock etc */
#define EM28XX_RESOURCE_VIDEO 0x01
#define EM28XX_RESOURCE_VBI 0x02
struct em28xx_v4l2 {
struct kref ref;
struct em28xx *dev;
struct v4l2_device v4l2_dev;
struct v4l2_ctrl_handler ctrl_handler;
struct video_device vdev;
struct video_device vbi_dev;
struct video_device radio_dev;
/* Videobuf2 */
struct vb2_queue vb_vidq;
struct vb2_queue vb_vbiq;
struct mutex vb_queue_lock;
struct mutex vb_vbi_queue_lock;
u8 vinmode;
u8 vinctl;
/* Camera specific fields */
int sensor_xres;
int sensor_yres;
int sensor_xtal;
int users; /* user count for exclusive use */
int streaming_users; /* number of actively streaming users */
u32 frequency; /* selected tuner frequency */
struct em28xx_fmt *format;
v4l2_std_id norm; /* selected tv norm */
/* Progressive/interlaced mode */
bool progressive;
int interlaced_fieldmode; /* 1=interlaced fields, 0=just top fields */
/* FIXME: everything else than interlaced_fieldmode=1 doesn't work */
/* Frame properties */
int width; /* current frame width */
int height; /* current frame height */
unsigned hscale; /* horizontal scale factor (see datasheet) */
unsigned vscale; /* vertical scale factor (see datasheet) */
unsigned int vbi_width;
unsigned int vbi_height; /* lines per field */
/* Capture state tracking */
int capture_type;
bool top_field;
int vbi_read;
unsigned int field_count;
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_pad video_pad, vbi_pad;
struct media_entity *decoder;
#endif
};
struct em28xx_audio {
char name[50];
unsigned num_urb;
char **transfer_buffer;
struct urb **urb;
struct usb_device *udev;
unsigned int capture_transfer_done;
struct snd_pcm_substream *capture_pcm_substream;
unsigned int hwptr_done_capture;
struct snd_card *sndcard;
size_t period;
int users;
spinlock_t slock;
/* Controls streaming */
struct work_struct wq_trigger; /* trigger to start/stop audio */
atomic_t stream_started; /* stream should be running if true */
};
struct em28xx;
enum em28xx_i2c_algo_type {
EM28XX_I2C_ALGO_EM28XX = 0,
EM28XX_I2C_ALGO_EM2800,
EM28XX_I2C_ALGO_EM25XX_BUS_B,
};
struct em28xx_i2c_bus {
struct em28xx *dev;
unsigned bus;
enum em28xx_i2c_algo_type algo_type;
};
/* main device struct */
struct em28xx {
struct kref ref;
/* Sub-module data */
struct em28xx_v4l2 *v4l2;
struct em28xx_dvb *dvb;
struct em28xx_audio adev;
struct em28xx_IR *ir;
/* generic device properties */
int model; /* index in the device_data struct */
int devno; /* marks the number of this device */
enum em28xx_chip_id chip_id;
unsigned int is_em25xx:1; /* em25xx/em276x/7x/8x family bridge */
unsigned char disconnected:1; /* device has been diconnected */
unsigned int has_video:1;
unsigned int is_audio_only:1;
enum em28xx_int_audio_type int_audio_type;
enum em28xx_usb_audio_type usb_audio_type;
unsigned char name[32];
struct em28xx_board board;
enum em28xx_sensor em28xx_sensor; /* camera specific */
/* Some older em28xx chips needs a waiting time after writing */
unsigned int wait_after_write;
struct list_head devlist;
u32 i2s_speed; /* I2S speed for audio digital stream */
struct em28xx_audio_mode audio_mode;
int tuner_type; /* type of the tuner */
/* i2c i/o */
struct i2c_adapter i2c_adap[NUM_I2C_BUSES];
struct i2c_client i2c_client[NUM_I2C_BUSES];
struct em28xx_i2c_bus i2c_bus[NUM_I2C_BUSES];
unsigned char eeprom_addrwidth_16bit:1;
unsigned def_i2c_bus; /* Default I2C bus */
unsigned cur_i2c_bus; /* Current I2C bus */
struct rt_mutex i2c_bus_lock;
/* video for linux */
unsigned int ctl_input; /* selected input */
unsigned int ctl_ainput;/* selected audio input */
unsigned int ctl_aoutput;/* selected audio output */
int mute;
int volume;
unsigned long hash; /* eeprom hash - for boards with generic ID */
unsigned long i2c_hash; /* i2c devicelist hash -
for boards with generic ID */
struct work_struct request_module_wk;
/* locks */
struct mutex lock;
struct mutex ctrl_urb_lock; /* protects urb_buf */
/* resources in use */
unsigned int resources;
/* eeprom content */
u8 *eedata;
u16 eedata_len;
/* Isoc control struct */
struct em28xx_dmaqueue vidq;
struct em28xx_dmaqueue vbiq;
struct em28xx_usb_ctl usb_ctl;
spinlock_t slock;
/* usb transfer */
struct usb_interface *intf; /* the usb interface */
u8 ifnum; /* number of the assigned usb interface */
u8 analog_ep_isoc; /* address of isoc endpoint for analog */
u8 analog_ep_bulk; /* address of bulk endpoint for analog */
u8 dvb_ep_isoc_ts2; /* address of isoc endpoint for DVB TS2*/
u8 dvb_ep_bulk_ts2; /* address of bulk endpoint for DVB TS2*/
u8 dvb_ep_isoc; /* address of isoc endpoint for DVB */
u8 dvb_ep_bulk; /* address of bulk endpoint for DVB */
int alt; /* alternate setting */
int max_pkt_size; /* max packet size of the selected ep at alt */
int packet_multiplier; /* multiplier for wMaxPacketSize, used for
URB buffer size definition */
int num_alt; /* number of alternative settings */
unsigned int *alt_max_pkt_size_isoc; /* array of isoc wMaxPacketSize */
unsigned int analog_xfer_bulk:1; /* use bulk instead of isoc
transfers for analog */
int dvb_alt_isoc; /* alternate setting for DVB isoc transfers */
unsigned int dvb_max_pkt_size_isoc; /* isoc max packet size of the
selected DVB ep at dvb_alt */
unsigned int dvb_max_pkt_size_isoc_ts2; /* isoc max packet size of the
selected DVB ep at dvb_alt */
unsigned int dvb_xfer_bulk:1; /* use bulk instead of isoc
transfers for DVB */
char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */
/* helper funcs that call usb_control_msg */
int (*em28xx_write_regs)(struct em28xx *dev, u16 reg,
char *buf, int len);
int (*em28xx_read_reg)(struct em28xx *dev, u16 reg);
int (*em28xx_read_reg_req_len)(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len);
int (*em28xx_write_regs_req)(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len);
int (*em28xx_read_reg_req)(struct em28xx *dev, u8 req, u16 reg);
enum em28xx_mode mode;
/* Button state polling */
struct delayed_work buttons_query_work;
u8 button_polling_addresses[EM28XX_NUM_BUTTON_ADDRESSES_MAX];
u8 button_polling_last_values[EM28XX_NUM_BUTTON_ADDRESSES_MAX];
u8 num_button_polling_addresses;
u16 button_polling_interval; /* [ms] */
/* Snapshot button input device */
char snapshot_button_path[30]; /* path of the input dev */
struct input_dev *sbutton_input_dev;
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_device *media_dev;
struct media_entity input_ent[MAX_EM28XX_INPUT];
struct media_pad input_pad[MAX_EM28XX_INPUT];
#endif
struct em28xx *dev_next;
int ts;
};
#define kref_to_dev(d) container_of(d, struct em28xx, ref)
struct em28xx_ops {
struct list_head next;
char *name;
int id;
int (*init)(struct em28xx *);
int (*fini)(struct em28xx *);
int (*suspend)(struct em28xx *);
int (*resume)(struct em28xx *);
};
/* Provided by em28xx-i2c.c */
void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus);
int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
enum em28xx_i2c_algo_type algo_type);
int em28xx_i2c_unregister(struct em28xx *dev, unsigned bus);
/* Provided by em28xx-core.c */
int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len);
int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg);
int em28xx_read_reg(struct em28xx *dev, u16 reg);
int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int len);
int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len);
int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val);
int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
u8 bitmask);
int em28xx_toggle_reg_bits(struct em28xx *dev, u16 reg, u8 bitmask);
int em28xx_read_ac97(struct em28xx *dev, u8 reg);
int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val);
int em28xx_audio_analog_set(struct em28xx *dev);
int em28xx_audio_setup(struct em28xx *dev);
const struct em28xx_led *em28xx_find_led(struct em28xx *dev,
enum em28xx_led_role role);
int em28xx_capture_start(struct em28xx *dev, int start);
int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk,
int num_bufs, int max_pkt_size, int packet_multiplier);
int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode,
int xfer_bulk,
int num_bufs, int max_pkt_size, int packet_multiplier,
int (*urb_data_copy)
(struct em28xx *dev, struct urb *urb));
void em28xx_uninit_usb_xfer(struct em28xx *dev, enum em28xx_mode mode);
void em28xx_stop_urbs(struct em28xx *dev);
int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
int em28xx_register_extension(struct em28xx_ops *dev);
void em28xx_unregister_extension(struct em28xx_ops *dev);
void em28xx_init_extension(struct em28xx *dev);
void em28xx_close_extension(struct em28xx *dev);
int em28xx_suspend_extension(struct em28xx *dev);
int em28xx_resume_extension(struct em28xx *dev);
/* Provided by em28xx-cards.c */
extern struct em28xx_board em28xx_boards[];
extern struct usb_device_id em28xx_id_table[];
int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl);
void em28xx_free_device(struct kref *ref);
/* Provided by em28xx-camera.c */
int em28xx_detect_sensor(struct em28xx *dev);
int em28xx_init_camera(struct em28xx *dev);
#endif