OpenCloudOS-Kernel/include/linux/firmware.h

111 lines
2.9 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_FIRMWARE_H
#define _LINUX_FIRMWARE_H
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/gfp.h>
#define FW_ACTION_NOHOTPLUG 0
#define FW_ACTION_HOTPLUG 1
struct firmware {
size_t size;
const u8 *data;
struct page **pages;
/* firmware loader private fields */
void *priv;
};
struct module;
struct device;
struct builtin_fw {
char *name;
void *data;
unsigned long size;
};
/* We have to play tricks here much like stringify() to get the
__COUNTER__ macro to be expanded as we want it */
#define __fw_concat1(x, y) x##y
#define __fw_concat(x, y) __fw_concat1(x, y)
#define DECLARE_BUILTIN_FIRMWARE(name, blob) \
DECLARE_BUILTIN_FIRMWARE_SIZE(name, &(blob), sizeof(blob))
#define DECLARE_BUILTIN_FIRMWARE_SIZE(name, blob, size) \
static const struct builtin_fw __fw_concat(__builtin_fw,__COUNTER__) \
__used __section(.builtin_fw) = { name, blob, size }
#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE))
int request_firmware(const struct firmware **fw, const char *name,
struct device *device);
int firmware_request_nowarn(const struct firmware **fw, const char *name,
struct device *device);
firmware: Add new platform fallback mechanism and firmware_request_platform() In some cases the platform's main firmware (e.g. the UEFI fw) may contain an embedded copy of device firmware which needs to be (re)loaded into the peripheral. Normally such firmware would be part of linux-firmware, but in some cases this is not feasible, for 2 reasons: 1) The firmware is customized for a specific use-case of the chipset / use with a specific hardware model, so we cannot have a single firmware file for the chipset. E.g. touchscreen controller firmwares are compiled specifically for the hardware model they are used with, as they are calibrated for a specific model digitizer. 2) Despite repeated attempts we have failed to get permission to redistribute the firmware. This is especially a problem with customized firmwares, these get created by the chip vendor for a specific ODM and the copyright may partially belong with the ODM, so the chip vendor cannot give a blanket permission to distribute these. This commit adds a new platform fallback mechanism to the firmware loader which will try to lookup a device fw copy embedded in the platform's main firmware if direct filesystem lookup fails. Drivers which need such embedded fw copies can enable this fallback mechanism by using the new firmware_request_platform() function. Note that for now this is only supported on EFI platforms and even on these platforms firmware_fallback_platform() only works if CONFIG_EFI_EMBEDDED_FIRMWARE is enabled (this gets selected by drivers which need this), in all other cases firmware_fallback_platform() simply always returns -ENOENT. Reported-by: Dave Olsthoorn <dave@bewaar.me> Suggested-by: Peter Jones <pjones@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-5-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-16 00:35:48 +08:00
int firmware_request_platform(const struct firmware **fw, const char *name,
struct device *device);
int request_firmware_nowait(
struct module *module, bool uevent,
const char *name, struct device *device, gfp_t gfp, void *context,
void (*cont)(const struct firmware *fw, void *context));
int request_firmware_direct(const struct firmware **fw, const char *name,
struct device *device);
firmware: support loading into a pre-allocated buffer Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. Let's add a request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. This skips the intermediate step of allocating a buffer in kernel memory to hold the firmware image while it's read from the filesystem. It also requires that drivers know how much memory they'll require before requesting the firmware and negates any benefits of firmware caching because the firmware layer doesn't manage the buffer lifetime. For a 16MB buffer, about half the time is spent performing a memcpy from the buffer to the final resting place. I see loading times go from 0.081171 seconds to 0.047696 seconds after applying this patch. Plus the vmalloc pressure is reduced. This is based on a patch from Vikram Mulukutla on codeaurora.org: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5 Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.org Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 05:04:28 +08:00
int request_firmware_into_buf(const struct firmware **firmware_p,
const char *name, struct device *device, void *buf, size_t size);
void release_firmware(const struct firmware *fw);
#else
static inline int request_firmware(const struct firmware **fw,
const char *name,
struct device *device)
{
return -EINVAL;
}
static inline int firmware_request_nowarn(const struct firmware **fw,
const char *name,
struct device *device)
{
return -EINVAL;
}
firmware: Add new platform fallback mechanism and firmware_request_platform() In some cases the platform's main firmware (e.g. the UEFI fw) may contain an embedded copy of device firmware which needs to be (re)loaded into the peripheral. Normally such firmware would be part of linux-firmware, but in some cases this is not feasible, for 2 reasons: 1) The firmware is customized for a specific use-case of the chipset / use with a specific hardware model, so we cannot have a single firmware file for the chipset. E.g. touchscreen controller firmwares are compiled specifically for the hardware model they are used with, as they are calibrated for a specific model digitizer. 2) Despite repeated attempts we have failed to get permission to redistribute the firmware. This is especially a problem with customized firmwares, these get created by the chip vendor for a specific ODM and the copyright may partially belong with the ODM, so the chip vendor cannot give a blanket permission to distribute these. This commit adds a new platform fallback mechanism to the firmware loader which will try to lookup a device fw copy embedded in the platform's main firmware if direct filesystem lookup fails. Drivers which need such embedded fw copies can enable this fallback mechanism by using the new firmware_request_platform() function. Note that for now this is only supported on EFI platforms and even on these platforms firmware_fallback_platform() only works if CONFIG_EFI_EMBEDDED_FIRMWARE is enabled (this gets selected by drivers which need this), in all other cases firmware_fallback_platform() simply always returns -ENOENT. Reported-by: Dave Olsthoorn <dave@bewaar.me> Suggested-by: Peter Jones <pjones@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-5-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-16 00:35:48 +08:00
static inline int firmware_request_platform(const struct firmware **fw,
const char *name,
struct device *device)
{
return -EINVAL;
}
static inline int request_firmware_nowait(
struct module *module, bool uevent,
const char *name, struct device *device, gfp_t gfp, void *context,
void (*cont)(const struct firmware *fw, void *context))
{
return -EINVAL;
}
static inline void release_firmware(const struct firmware *fw)
{
}
static inline int request_firmware_direct(const struct firmware **fw,
const char *name,
struct device *device)
{
return -EINVAL;
}
firmware: support loading into a pre-allocated buffer Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. This creates needless memory pressure and delays loading because we have to copy from kernel memory to somewhere else. Let's add a request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. This skips the intermediate step of allocating a buffer in kernel memory to hold the firmware image while it's read from the filesystem. It also requires that drivers know how much memory they'll require before requesting the firmware and negates any benefits of firmware caching because the firmware layer doesn't manage the buffer lifetime. For a 16MB buffer, about half the time is spent performing a memcpy from the buffer to the final resting place. I see loading times go from 0.081171 seconds to 0.047696 seconds after applying this patch. Plus the vmalloc pressure is reduced. This is based on a patch from Vikram Mulukutla on codeaurora.org: https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5 Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.org Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Cc: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 05:04:28 +08:00
static inline int request_firmware_into_buf(const struct firmware **firmware_p,
const char *name, struct device *device, void *buf, size_t size)
{
return -EINVAL;
}
#endif
int firmware_request_cache(struct device *device, const char *name);
#endif